3-043-521-12 (1)
Dictator/Transcriber
BM-87DST
Operating Instructions
Before operating the unit, please read this manual thoroughly and
retain it for future reference.
Ow ner’s Record
The model and serial numbers are located on the bottom.
Record the serial number in the space provided below. Refer to
them whenever you call upon your Sony dealer regarding this
product.
Model No. BM-87DST
Serial No.
BM-87DST
HU-80 (not supplied)
© 2000 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta b le o f Co n t e n t s
Features ...................................................................................................................................................................................... 4
Precautions ................................................................................................................................................................................ 5
Operation Flow Chart .............................................................................................................................................................. 6
Dictating .................................................................................................................................................................................. 6
Transcribing ............................................................................................................................................................................ 7
Location and Function of Controls ........................................................................................................................................ 8
Preparation .............................................................................................................................................................................. 10
Connecting the Power Source ............................................................................................................................................ 10
Connecting the HU-80 Hand Control Unit ...................................................................................................................... 10
Connecting the Supplied Foot Control Unit. ................................................................................................................... 10
Inserting a Cassette .............................................................................................................................................................. 11
Dictating ................................................................................................................................................................................... 13
Operation .............................................................................................................................................................................. 13
Useful Functions .................................................................................................................................................................. 14
Tips for a More Efficient Dictating .................................................................................................................................... 16
Transcribing ............................................................................................................................................................................. 17
Operation .............................................................................................................................................................................. 17
Useful Functions .................................................................................................................................................................. 18
Tips on Transcribing ............................................................................................................................................................ 20
Erasing ...................................................................................................................................................................................... 21
Alarm System .......................................................................................................................................................................... 22
Telephone Recording ............................................................................................................................................................. 23
Maintenance ............................................................................................................................................................................ 24
Cleaning the Heads ............................................................................................................................................................. 24
Specifications ........................................................................................................................................................................... 25
Troubleshooting Guide .......................................................................................................................................................... 26
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Fe a t u re s
The Sony BM-87DST dictator/transcriber is designed to be used for both dictating and transcribing.
As a d ict a t o r
• The Sony HU-80 hand control unit (not supplied) remotely controls the BM-87DST
dictator/ transcriber.
• Electronic index signal — “LTR” (letter=end of document) signal — can be recorded on a tape while
the unit is set in the recording (dictating), telephone recording, stop or playback mode.
• Alarm sound informs a recording error.
• Recording of telephone calls can be performed with the use of the optional telephone recording
adaptor.
• With the use of the supplied headphones, you can monitor the sound with the desired sound level
during recording.
Dictating
HU-80
(not supplied)
As a t ra n scrib e r
• Auto stop function quickly accesses the dictated material.
• Auto backspace function with the REVERSE TIME control makes transcribing easy by enabling the
reviewing of the last recorded words each time the playback is resumed.
• Rapid erasing function with the z ERASE button and the j REW button.
Transcribing
Foot control unit
(supplied)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Pre ca u t io n s
• Operate the unit only on 9 V DC.
For the AC operation, use the AC power adaptor supplied with the unit. Do not use any other AC
power adaptor as it may cause a malfunction of the unit.
• Unplug the AC power adaptor from the wall outlet when it will not be used for an extended period
of time. To disconnect the adaptor, pull it out by grasping the adaptor itself. Never pull it by the
cord.
• Do not place the unit in a location near heat sources such as radiators or air ducts or in a place
subject to direct sunlight, excessive dust, mechanical vibration or shock.
• Allow adequate air circulation to prevent an internal heat build-up. Do not place the unit near
materials (curtains, draperies, etc.) that may block the ventilation holes.
• Should any solid object or liquid fall into the unit, unplug the unit and have it checked by qualified
personnel before operating it any further.
• The supplied AC power adaptor becomes hot if it is connected to a wall outlet for a long period of
time. However, this will not cause any mechanical problems.
If you have any questions or problems concerning your unit that are not covered in this manual,
please consult the Sony dealer from whom you purchased the unit.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Op e ra t io n Flo w Ch a rt
For details, refer to the pages in z.
: Necessary step
: Optional step
Dictating qd
Connect the AC power adaptor to the unit and to a wall outlet.
0
Connect the optional HU-80 hand control unit. q;
Set the POWER switch to ON.
HU-80
(not
Insert a cassette. qa
supplied)
Set the TAPE SPEED selector to 2.4 or 4.8. qg
Press the RESET button to set the TAPE COUNTER to zero.
Set the function selector of the HU-80 to DICT. Speak into the
microphone.
For quick reviewing (playback) and correcting the dictated material
Keep the function selector of the HU-80 pressed down toward
B. SPACE to rewind the tape unit the desired point on the tape is
reached. Release the selector and playback of the dictating begins.
When the reviewing is completed, set the function selector to
DICT to proceed with the dictating.
Record the LTR signal at the end of each dictated material. qf
Set the function selector of the HU-80 to STOP.
Press the eject button to remove the cassette.
Hand the cassette to your secretary or transcriptionist.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Transcribing qj
Disconnect the HU-80 hand control unit (if it is connected).
Connect the supplied foot control unit. 0
Set the POWER switch to ON.
Insert the dictated cassette. qa
Foot control unit
(supplied)
Set the TAPE SPEED selector to 2.4 or 4.8. qg
Set the SPEAKER selector to BUILT-IN w; or connect
headphones. w;
Set the AUTO STOP selector to OFF. qk
Press the j REW button.
When the beginning of the dictated cassette is reached, a beep
tone is heard and the unit automatically shuts off.
Keep the right side of the pedal depressed. w;
(When the supplied foot control unit is connected).
or
Press the G LISTEN button. w;
(When the BM-87DST is used for operation.)
Adjust the VOLUME control and the TONE control.
Adjust the starting point for playback with the use of the REVERSE
TIME control. (When the supplied foot control unit is used.) Set the
SPEED CONTROL selector to ON and adjust the tape speed with
the SPEED control. qk
After transcribing, stop the tape.
Release the pedal. (When the supplied foot control unit is used.)
w;
or
Press the s STOP button. (When the G LISTEN button on the
BM-87DST is pressed to play back the tape.) w;
Erase the tape.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Lo ca t io n a n d Fu n ct io n o f Co n t ro ls
For details, refer to the pages indicated in z.
Cassette holder
TAPE COUNTER qd
RESET button qd
Eject button
Press to eject the cassette.
Built-in speaker
Press to set the TAPE
COUNTER to zero
POWER lamp
Lights up when the POWER
switch is set to ON.
REC (record)/ERASE lamp qdwa
Lights up while recording or
erasing. Flickers when the
microphone picks up sound.
LTR(letter)INDEX lamp qf
Lights up when the LTR signal is
recorded.
TEL REC (telephone recording) button wd
z ERASE button wa
Tape operation buttons
STOP LISTEN
REW
FF
j REW (rew ind) button
J FF (fast forw ard) button
G LISTEN button
s STOP button
8
Download from Www.Somanuals.com. All Manuals Search And Download.
VOLUME control
TONE control
REVERSE TIME control ql
SPEED control qk
SPEAKER (BUILT-IN/HAND)
selector w;
STEREO PLAYBACK/AUTO STOP (OFF/
ON) selector qk
SPEED CONTROL (OFF/ON)
selector qk
TAPE SPEED (2.4/4.8) selector qg
POWER (OFF/ON) sw itch qa
Left side
Rear
i jack qfw;
DC IN 9V jack 0
CONTROL UNIT connector 0
TELEPHONE PICKUP jack wd
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Pre p a ra t io n
Connecting the Pow er Source
Note on the AC pow er adaptor
Use only the AC power adaptor
(supplied). Do not use any other
AC power adaptor.
to a wall outlet
Rear
AC power adaptor
(supplied)
to the DC IN 9V jack
Polarity of the plug
Connecting the HU-80 Hand Control Unit (not supplied)
For operation, refer to “Dictating” on page 13.
to the CONTROL UNIT
connector
Not this way
This w ay
HU-80
Attaching the cradle
Attach the cradle which is supplied to the HU-80 to the left or right side of the unit. Place the HU-80
hand control unit on the cradle while not in use. Insert the cradle into the slots and slide to secure it.
Right side
Left side
Connecting the Supplied Foot Control Unit.
For operation, refer to “Transcribing” on page 17.
to the CONTROL UNIT
connector
This w ay
Not this way
Foot control unit
(supplied)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting a Cassette
1
4
5
Cassette
3
POWER
2
1 Take up any slack in the tape.
2 Set the POWER sw itch to ON.
The POWER lamp lights up.
3 Press the eject button to open the cassette holder.
4 Insert a cassette into the cassette holder w ith the side to be recorded or
played back facing upw ard.
5 Close the cassette holder.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Pre p a ra t io n
xNo t e s o n ca sse t t e s
• Any standard cassette can be used, but the optional Sony leaderless cassette DC-60 or DC-90 is
recommended. The use of a TYPE II (High position) or TYPE IV (metal) cassette is not advisable.
• Choose a cassette of suitable length. The recording time on each side of these cassettes is as follows:
Sony DC-60 approx. 30 minutes (4.8 cm/ s)
Sony DC-90 approx. 45 minutes (4.8 cm/ s)
• The use of cassettes whose running time is longer than 90 minutes (total time) are not advisable.
• The letter A on the Sony cassette is embossed to help you distinguish that side of the cassette in a
dimly lit area.
To prevent accidental erasure
When the unit is operated in the recording mode, any previous recordings will be automatically
erased. For this reason, cassettes incorporate a safety device to prevent any accidental erasure.
When the small tabs at the rear of a cassette are broken off, an interlock on the unit will be activated,
preventing recording.*
To protect the recording on side A, break off the tab of that side.
To protect the recording on side B, break off the tab of that side.
Side A
tab of side A
Remove the broken tab.
To reuse a cassette for recording after the tabs have been removed, simply cover each slot with a small
piece of plastic tape. Do not stick any material on any other part of the cassette except the circled part,
as illustrated below.
Plastic tape
* When the cassette is loaded for telephone recording with the tabs broken off and the TEL REC
button is pressed, the beep tone is heard and the TEL REC button does not operate.
When the cassette is loaded for dictating with the tabs broken off and the function selector is set to
DICT, recording cannot be made and the beep tone is heard.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Dict a t in g
To use the unit as a dictating machine, connect the HU-80 hand control unit (not supplied). For the
connection instructions, see page 10.
Operation
* The SEC button does not
function w ith the BM-87DST.
Micro p h o n e
DICT la m p
2
POWER
(SEC b u t t o n )*
FWD SPACE b u t t o n
5
Fu n ct io n
se le ct o r
•DICT (dictating)
•STOP
4
•LISTEN
•B.SPACE
LTR
b u t t o n
Ha n d
sp e a ke r
REC/ERASE
HU-80 (not supplied)
1
3
1 Set the POWER sw itch to ON.
The POWER lamp lights up.
2 Insert a cassette. (See page 11.)
3 Set the TAPE SPEED selector to 2.4 (cm/s) or 4.8 (cm/s). (See page 15.)
4 Press the RESET button to set the TAPE COUNTER to zero.
5 Set the function selector to DICT.
Recording starts. Speak into the microphone.
The DICT lamp (HU-80) lights up and REC/ ERASE lamp (BM-87DST) flickers
when the microphone picks up the sound.
To stop the tape
Set the function selector to STOP.
Note
Keep the HU-80 away from the BM-87DST during recording.
If not, noise may be recorded.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Dict a t in g
Useful Functions
xLTR (le t t e r) sig n a l
You can record electronic index signals on the tape with the HU-80 while the unit is set in the
recording (dictating), telephone recording, stop or playback mode.
LTR (letter=end of document) signal: Record at the end of each dictated material.
When the Auto stop function (page 18) is activated (AUTO STOP:ON), the tape automatically stops at
each index signal when it is rewound or fast forwarded. Dictated material can be located without the
user’s having to listen to the entire tape.
To record the LTR signal
Press the LTR button on the HU-80.
Each time the button is pressed, the LTR INDEX lamp (BM-87DST) lights up for about 3 seconds.
LTR
Notes
• The LTR signal should be recorded with the intervals of more than 6 seconds.
• Playback sound is muted while the LTR signal is recorded. However, the recorded material will be
protected.
• While the LTR signal is being recorded with the SPEED CONTROL selector set to ON, the tape will
run at the normal tape speed.
xMo n it o rin g w h ile d ict a t in g
The recording can be monitored through the headphones. Connect the supplied stereo headphones to
the i jack located on the left side of the unit. You can hear the sound in stereo through the stereo
headphones. The sound is monaural through the built-in speaker. Adjust the VOLUME monitor if
necessary.
VOLUME
to the i jack
Headphones
14
Download from Www.Somanuals.com. All Manuals Search And Download.
xQu ick re vie w in g (p la yb a ck) a n d co rre ct in g t h e d ict a t e d m a t e ria l
You can easily play back the dictated material and correct it if necessary.
1 Keep the function selector of the HU-80 pressed down toward B.SPACE to rewind the tape.
2 Release the selector. Playback of the dictating begins.
3 When the reviewing is completed, set the function selector to DICT to proceed with the dictating.
1
2
3
LISTEN
B.SPACE
DICT
To fast forward the tape, keep the FWD SPACE button of the HU-80 pressed until the desired section
is located.
FWD SPACE
xTa p e sp e e d se le ct o r
With the TAPE SPEED selector, you can change the length of recording time on a cassette.
When the TAPE SPEED selector is set to 4.8(centimeters/ second), you can record the normal length on
a cassette. (i.e. 60 minutes using both sides of a 60-minute cassette.)
When the TAPE SPEED selector is set to 2.4(centimeters/ second), you can record double the normal
length on a cassette. (i.e. 120 minutes using both sides of a 60-minute cassette.)
Note
Tapes recorded in the TAPE SPEED 2.4 position cannot be played properly by a tape recorder without
the TAPE SPEED selector function.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Dict a t in g
Tips for a More Efficient Dictating
Before you start dictating
• Organize your thoughts.
• Make notes or an outline of what you want to dictate.
• Check that the cassette is erased. (See page 21.)
When you start dictating
• Identify yourself. (Name, department, phone number, etc.)
• Indicate the type of dictating. (Memo, letter, etc.)
• Give transcribing instructions. (Type of stationery, number of copies, envelopes, etc.)
• Specify distribution. (Name, addresses, etc.)
During dictating
• Relax and speak clearly, at normal speed.
• Short sentences are best.
• Include punctuation.
• Spell difficult or unusual words.
• Correct your mistakes. (Review and redictate.) (See page 15.)
• At the end of each dictated material, record an LTR signal.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Tra n scrib in g
To use the unit as a transcribing machine, connect the supplied foot control unit. For the connection
instructions, see page 10.
Operation
POWER
2
8
Fast forw ard
Rew ind
Listen
7
6
1 3 5 4
Foot control unit (supplied)
1 Set the POWER sw itch to ON.
The POWER lamp lights up.
2 Insert the dictated cassette. (See page 11.)
3 Set the TAPE SPEED selector to 2.4 (cm/s) or 4.8 (cm/s). (See page 15.)
4 Set the SPEAKER selector to BUILT-IN.
5 Set the AUTO STOP selector to OFF. (See page 18.)
6 Press the j REW button to rew ind the tape.
When the tape reaches the beginning of the dictated cassette, a beep tone is heard
and the unit automatically shuts off.
7 Keep the right side of the pedal of the supplied foot control unit depressed to
play back the tape.
8 Adjust the VOLUME control and the TONE control.
To stop the tape
Release the pedal of the supplied foot control unit.
To rew ind the tape
Keep the left side of the pedal of the supplied foot control unit depressed.
To fast forw ard the tape
Keep the center top of the pedal of the supplied foot control unit depressed.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Tra n scrib in g
Useful Functions
x Au t o st o p fu n ct io n
With the Auto stop function, recorded documents can be located without the user’s having to listen to
the entire tape. This function activates only in the rewind or fast forward mode.
When the AUTO STOP selector is set to ON, the tape automatically stops at each LTR signal
previously recorded on the tape. (See “LTR signal” on page 14.)
Notes
• The tape does not stop at the LTR signal even if the AUTO STOP selector is set to ON while the J
FF button or the j REW button is continuously depressed.
• When the AUTO STOP selector is set to ON, the tape automatically stops at each SEC signal
previously recorded on the tape with the Sony Professional Dictation Machine.
When the AUTO STOP selector is set to OFF, the tape does not stop even if the electronic index
signals have been previously recorded.
Notes
• E-INDEX signal of the Sony conventional models corresponds to the LTR signal of BM-87DST.
• LTR signal and E-INDEX signal do not correspond to the cue signals used for the consumer type
tape recorder.
• Set the AUTO STOP selector to OFF to transcribe either a music cassette or a cassette which has not
been recorded with the Sony Professional Dictation Machine, otherwise the tape may automatically
stops in the rewind or fast forward mode.
x Co n t ro llin g t h e sp e e d
Set the SPEED CONTROL selector to ON to adjust
the tape speed with the SPEED control. The tape
can be played back at a speed faster or slower than
normal. Set the SPEED CONTROL selector to OFF
to transcribe the dictated material at the normal
speed.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
x Au t o b a cksp a ce fu n ct io n
This function operates only when the supplied foot control unit is connected. With the use of the
REVERSE TIME control, the tape is rewound a little each time it is stopped. Then, the last few
recorded words can be reviewed when you resume playback. Adjust the REVERSE TIME control to
determine the length of the tape to be rewound. At “9” position, the tape is rewound so that the
dictated material can be reviewed for approximately 5 seconds*. At “0” position, the tape stops
without being rewound at all.
* Measured at some point near the middle of the tape. The reverse time will vary in accordance with
the remaining length of the tape.
stops at this point.
Playback
Tape
approx. 5 seconds.
playback
Next playback will start from this point.
stops at this point.
Playback
Tape
playback
Next playback will start from this point.
Set the REVERSE TIME control to the desired position and keep the right side of the pedal of the
supplied foot control unit depressed to play back the tape.
Note
The reverse time will be different by a few seconds according to the remaining length or the total time
of the tape.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Tra n scrib in g
x Ta p e t ra n sp o rt o p e ra t io n
BM-87DST
HU-80
Supplied foot control unit
Rew ind
Press the j
REW button.
Keep the function selector
pressed down toward B.
SPACE.
Keep the left side of the pedal
depressed.
Stop
Press the s STOP Set the function selector to
Release the pedal.
button.
STOP.
Listen
Press the G
LISTEN button.
Set the function selector to
LISTEN.
Keep the right side of the pedal
depressed.
Fast
forw ard
Press the J FF
button.
Keep the FWD SPACE
button pressed.
Keep the top center of the pedal
depressed.
x Priva t e list e n in g
Connect the supplied stereo headphones to the i jack.
The sound will be heard through the stereo headphones and the speaker will be disconnected.
x Se le ct in g t h e sp e a ke r
You can play back the dictated material through the built-in speaker or the speaker on the HU-80 by
setting the SPEAKER selector to BUILT-IN or HAND.
Tips on Transcribing
• Before typing, check the number of the dictated material and review the contents using the
auto stop function.
• Erase the tape when transcribing is finished.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Era sin g
The recording can be erased rapidly.
1
REC/ERASE
2
s STOP
1 Insert the cassette w ith the side to be erased facing upw ard.
Be sure not to rewind the tape after transcribing. The end section of the dictated
material to be erased should be positioned at the recording head.
2 Keep the z ERASE button pressed and then press the j REW button.
The REC/ ERASE lamp lights up. The section of the tape being rewound is erased.
To stop the tape
Press the s STOP button.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Ala rm Syst e m
The alarm system is activated in the following situations.
Alarm system
Situation
To release alarm system
When you press a
button,
• No cassette is inserted.
• The cassette’s safety tabs have
been removed.
First, release the button, then
• Insert a cassette.
• Insert a new cassette or cover
the slot.
Beep
When the unit shuts off,
• The end of the tape has been
reached.
Rewind the tape.
Beep
• The tape is torn.
Insert a new cassette.
(about 2 seconds)
When the unit shuts off,
The LTR signal is detected while
the tape is wound rapidly (in the
fast forward or rewind mode)
when the AUTO STOP selector is
The beep tone stops after about
0.5 second.
Beep
(about 0.5 second) set to ON.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Te le p h o n e Re co rd in g
To record a telephone conversation, connect the telephone recording adaptor (not
supplied)* to the TELEPHONE PICKUP jack. For further details, refer to the instruction
manual of the telephone recording adaptor.
to the TELEPHONE PICKUP jack
Rear
Telephone Recording Adaptor (not supplied)
4
2
POWER
REC/ERASE
1 3
1 Set the POWER sw itch to ON.
The POWER lamp lights up.
2 Insert a cassette. (See page 11.)
3 Set the TAPE SPEED selector to 2.4 (cm/s) or 4.8 (cm/s). (See page 15.)
4 Keep the TEL REC button pressed for more than a second.
Telephone recording begins. The REC/ ERASE lamp flickers when the telephone
recording adaptor picks up the sound.
To stop the tape
Press the s STOP button.
At the beginning of telephone recording
The LTR signal is automatically recorded.
While the LTR signal is being recorded (for about 3 seconds), the unit cannot be stopped even though
the s STOP button is pressed.
During telephone recording
Only the LTR button (HU-80) and the s STOP button (BM-87DST) are operative.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Ma in t e n a n ce
Cleaning the Heads
To produce optimum sound, clean the tape heads after every 10 hours of use.
3
1
approx. 90˚
4
Capstan
Record/ playback head
2
Pinch
roller
Cotton swab
Erase head
1 Disconnect the AC pow er adaptor.
2 Press the eject button to open the cassette holder.
3 Pull up the lid further to the direction of the arrow .
4 Moisten a cotton swab or a soft cloth with alcohol and w ipe the parts as show n
above.
x Cleaning the cabinet
Clean the cabinet with a soft cloth slightly moistened with a mild detergent solution. Never use strong
solvents, such as thinner or benzine, since they may damage the finish.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Sp e cifica t io n s
Recordingsystem
4-track2-channelmonaural
(Lchannelfor electronicindexsignals,Rchannelfor sound signals)
Tapespeed
4.8 cm/ s or 2.4 cm/ s
Fastwinding time
Frequencyresponse
Approx.2min.20sec.with Sony CassetteDC-90
200 – 8,000 Hz (4.8 cm/ s)
200 – 5,000 Hz (2.4 cm/ s)
Approx. 5.7 cm (2 1⁄4 in.) dia.
Speaker
Poweroutput
Input
350mW(at10%distortion)
TELEPHONE PICKUP (minijack)
Sensitivity 0.2mV
Inputimpedance10kilohms
Output
i(headphones)jack (stereominijack)for 8-300ohmsheadphones
Approx.47-ohm
CONTROL UNIT connector
For HAND control unit or FOOT control unit
Variablerangeofthetapespeed
From approx.-20%to+50%
Powerrequirements
9 V DC
AC power adaptor 120 V AC, 60 Hz
Powerconsumption
Dimensions
14W (with thesupplied AC power adaptor)
Approx. 200 × 70 × 245 mm (w ×h×d) (7 7⁄8 × 2 7⁄8 × 9 3⁄4 in.) including
projectingpartsand controls
Mass
Approx.1.2kg (2lb.11oz.)
Supplied accessory
ACpower adaptor (1)
Footcontrolunit(1)
StereoHeadphones(1)
Design and specificationsaresubjecttochangewithoutnotice.
TheBM-87DSTcannotbeused with theMicrocassetteadaptor MA-50.
Your dealer maynothandlesomeoftheabovelisted optionalaccessories.Pleaseaskthedealer for
detailed information.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Tro u b le sh o o t in g Gu id e
Should anyproblem occur,conductthefollowingsimpleteststodeterminewhether or notservicingis
required.Iftheproblem persistsafteryou haveconducted thesetests,consultthenearestSony
Dictation Systemsdealer.
Th e u n it d o e s n o t o p e ra t e .
• TheACpower adaptor isnot plugged into a walloutlet.
• The POWER switch is set to OFF.
• DisconnecttheACpower adaptor on thedictator and connectitagain.
No so u n d fro m t h e b u ilt -in sp e a ke r
• The SPEAKER selector is set to HAND.
• The VOLUME control is set in the MIN position.
• i(the headphone jack) is plugged in.
Th e t a p e sp e e d is t o o fa st o r t o o slo w .
• The SPEED controlis set incorrectly.
• The SPPED CONTROL selector is set to ON.
• The TAPESPEED selector is set to 4.8(normalrecording time)or 2.4(double recording time).
Th e t a p e st o p s in t h e re w in d o r fa st fo rw a rd m o d e a n d t h e b e e p t o n e is
h e a rd .
• When the AUTO STOP selector is set to ON,
— acassettewith electronicindexsignalrecorded isused.
— either amusiccassetteor acassettewhich wasnotrecorded with theSonyProfessionalDictation
Machine is used. t Set the AUTO STOP selector to OFF.
• Theentiretapehasbeen wound.
Re co rd in g fu n ct io n s (Dict , Era se , Te le p h o n e re co rd in g , LTR) d o n o t
a ct iva t e .
• Thetapeiscompletelyrewound.
• Thecassettetabshavebeen removed.
HU-80 o r t h e su p p lie d fo o t co n t ro l u n it d o e s n o t o p e ra t e .
• The plug is not connected to the CONTROL UNIT connector firmly.
• TheBM-87DSTisoperated with thetapeoperation button on theBM-87DST.
button and proceed with theoperation on theHU-80or thesupplied footcontrolunit.
tPressthe sSTOP
So u n d d ro p -o u t s, lo ss o f h ig h fre q u e n cy so u n d s, o r e xce ssive n o ise
Theheadsaredirty.See“Maintenance.”
Era sin g is u n sa t isfa ct o ry.
Theerasehead isdirty.See“Maintenance.”
26
Download from Www.Somanuals.com. All Manuals Search And Download.
|