Sony Kitchen Entertainment Center VGN FE600 User Manual

User Guide  
Personal Computer  
VG N - F E 6 0 0 S e r i e s  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6
Before Use  
Before Use  
Congratulations on your purchase of this Sony VAIO® computer, and welcome to the on-screen User Guide. Sony has  
combined leading-edge technology in audio, video, computing, and communications to provide state-of-the-art personal  
computing.  
Documentation  
Your documentation includes printed information and user guides to read on your VAIO computer.  
Printed Documentation  
Welcome mat — Contains an overview of connections, setting up information, etc.  
Safety information — Contains safety guidelines and owner information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
7
Before Use  
Non-printed Documentation  
User Guide (this manual) — Contains features of your computer. It also includes information about the software programs  
included with your computer, as well as information on solving common problems.  
Specifications — The online Specifications describe the hardware and software configuration of your VAIO computer.  
To view the online Specifications:  
1
2
Connect to the Internet.  
Go to the Sony online support Web site at http://esupport.sony.com/EN/VAIO/ for customers in USA,  
at http://www.sony.ca/support for customers in Canada, or at http://esupport.sony.com/ES/ for customers in Latin  
American countries or areas.  
VAIO Recovery Guide — Provides information about restoring individual software programs, software drivers, and drive  
partition(s) or your entire hard disk drive to the original factory installed settings.  
To access this on-screen guide:  
1
2
3
Click Start, point to All Programs, and click VAIO Support Central.  
Click VAIO Documentation.  
Click VAIO Recovery Guide.  
MCE guide (Selected models only) — Provides information about using the Windows XP Media Center Edition  
operating system.  
To access this on-screen guide:  
1
2
3
Click Start, point to All Programs, and click VAIO Support Central.  
Click VAIO Documentation.  
Click MCE guide.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
8
Before Use  
Ergonomic Considerations  
You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt  
to take account of the following ergonomic considerations to both stationary and portable environments:  
Position of your computer – Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your  
wrists in a neutral, comfortable position (3) while using the keyboard, touch pad, or external mouse. Let your upper arms  
hang naturally at your sides. Have breaks during sessions with your computer. Excessive use of the computer may strain  
muscles or tendons.  
Furniture and posture – Sit in a chair with good back support. Adjust the level of the chair so your feet are flat on the  
floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning  
far backwards.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
9
Before Use  
Viewing angle of the computer's display – Use the display's tilting feature to find the best position. You can reduce eye  
strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness setting of the  
display as well.  
Lighting – Choose a location where windows and lights do not create glare and reflection on the display. Use indirect  
lighting to avoid bright spots on the display. You can also purchase accessories for your display that help reduce glare.  
Proper lighting adds to your comfort and work effectiveness.  
Positioning an external display – When using an external display, set the display at a comfortable viewing distance.  
Make sure the display screen is at eye level or slightly lower when you are sitting in front of the monitor.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
10  
Getting Started  
Getting Started  
This section describes how to get started with using your VAIO computer.  
!
Before the first computer startup, do not connect any new hardware that did not normally come with your computer. Make sure to start up your  
computer with only the supplied accessories connected and set up your system. Upon completion, connect one device (for example, a printer, external  
hard disk drive, scanner, and so on) at a time, following the manufacturer's instructions.  
Locating Controls and Ports (page 11)  
About the Indicator Lights (page 18)  
Connecting a Power Source (page 20)  
Using the Battery Pack (page 22)  
Shutting Down Your Computer Safely (page 27)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
11  
Getting Started  
Locating Controls and Ports  
Take a moment to identify the controls and ports shown on the following pages.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
12  
Getting Started  
Front  
*1  
A Built-in MOTION EYE camera (page 33)  
B Built-in MOTION EYE camera indicator (page 18)  
C LCD screen (page 123)  
D Built-in speakers  
E Keyboard (page 29)  
F Touch pad (page 31)  
G Power indicator (page 18)  
H Battery indicator (page 18)  
I Hard disk drive indicator (page 18)  
J Memory Stick Duo/PRO Duo media indicator (page 18)  
K LCD screen lid LOCK/RELEASE switch  
Make sure to slide this switch to the LOCK position before  
moving your computer.  
L Headphones jack (page 83)  
M Microphone jack (page 95)  
N Built-in microphone (monaural)  
O WIRELESS switch (page 58)  
P WLAN (Wireless LAN) indicator (page 18)  
*1  
Q Bluetooth indicator (page 18)  
*2  
R Memory Stick Duo/PRO Duo media slot (page 51)  
*1  
On selected models only.  
*2  
Your computer supports Memory Stick Duo media and Memory Stick PRO  
Duo media with high speed and high capacity capabilities.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
13  
Getting Started  
A Muting button (page 32)  
B Muting indicator (page 18)  
C VOL buttons (page 32)  
D S1/S2 buttons (page 32)  
E Num lock indicator (page 18)  
F Caps lock indicator (page 18)  
G Scroll lock indicator (page 18)  
H Power button  
I Power indicator (page 18)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
14  
Getting Started  
Back  
A Air vent  
B Battery connector (page 22)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
15  
Getting Started  
Right  
A PC Card release button (page 46)  
B PC Card slot (page 44)  
*1  
C ExpressCard /34 slot (page 47)  
®
D i.LINK (IEEE 1394) S400 port (page 100)  
*2  
E Hi-Speed USB (USB 2.0) ports (page 96)  
*3 *4  
F S VIDEO OUTPUT port  
*4  
G Monitor (VGA) port (page 85)  
H DC IN port (page 20)  
*1  
Referred to as the ExpressCard/34 slot hereinafter.  
*2  
Supports high-/full-/low- speeds.  
*3  
Referred to as the S VIDEO OUT port hereinafter.  
*4  
Disabled when your computer is attached to the optional multi function bay  
docking station.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
16  
Getting Started  
Left  
A Modem port (page 57)  
B Network (Ethernet) port (page 102)  
C Optical disc drive (page 34)  
D Drive eject button (page 34)/  
Optical disc drive indicator (page 18)  
E Manual eject hole (page 159)  
F Security slot  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
17  
Getting Started  
Bottom  
A Multi function bay docking station connector (page 77)  
B Air vents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
18  
Getting Started  
About the Indicator Lights  
Your computer is equipped with the following indicator lights.  
Indicator  
Functions  
Power 1  
Illuminates when the power of the computer is on, blinks in Standby mode, and turns off when the computer is  
in Hibernate mode or off.  
Battery e  
Illuminates when the computer is using battery power, blinks when the battery is running out of power, and  
double-blinks when the battery is charging.  
Illuminates when data is read from or written to the Memory Stick media in the Memory Stick Duo/PRO Duo  
slot. (Do not enter Standby mode or turn off the computer when this indicator is on.) When the indicator is off,  
the Memory Stick media is not being used.  
Memory Stick Duo/PRO Duo  
Muting %  
Illuminates when the volume is turned off.  
Built-in MOTION EYE camera*  
Optical disc drive  
Illuminates while the built-in MOTION EYE camera is in use.  
Illuminates when data is read from or written to the optical disc. When the indicator is off, the optical disc is not  
being used.  
Illuminates when data is read from or written to the hard disk. Do not enter Standby mode or turn off the  
computer when this indicator is on.  
Hard disk  
Num lock  
Caps lock  
Press the Num Lk key to activate the numeric keypad. Press it a second time to deactivate the numeric keypad.  
The numeric keypad is not active when the indicator is off.  
Press the Caps Lock key to type letters in uppercase. Letters appear in lowercase if you press the Shift key  
while the indicator is on. Press the key a second time to turn off the indicator. Normal typing resumes when the  
Caps lock indicator is off.  
Press the Scr Lk key to change how you scroll the display. Normal scrolling resumes when the Scroll lock  
indicator is off. The Scr Lk key functions differently depending on the program you are using and does not work  
with all programs.  
Scroll lock  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
19  
Getting Started  
Indicator  
Functions  
Illuminates when the WIRELESS switch is set to ON and Bluetooth technology is enabled.  
*
Bluetooth  
WIRELESS LAN  
On selected models only.  
Illuminates when the wireless LAN function is running.  
*
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
20  
Getting Started  
Connecting a Power Source  
You can use either an AC adapter or a rechargeable battery pack as a power source for your computer.  
Using the AC Adapter  
Use the computer only with the supplied AC adapter.  
To use the AC adapter  
1
2
3
Plug one end of the power cord (1) into the AC adapter (3).  
Plug the other end of the power cord into an AC outlet (2).  
Plug the cable attached to the AC adapter (3) into the DC IN port (4) on the computer or on the optional multi function bay  
docking station.  
!
The shape of the DC In plug varies depending on the AC adapter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
21  
Getting Started  
To disconnect the computer completely from AC power, unplug the AC adapter.  
Make sure that the AC outlet is easily accessible.  
If you do not use the computer for a long period of time, put the computer into Hibernate mode. See Using Hibernate Mode (page 111). This power  
saving mode saves the time of shutting down or resuming.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
22  
Getting Started  
Using the Battery Pack  
The battery pack supplied with your computer is not fully charged at the time of purchase.  
Installing the Battery Pack  
To install the battery pack  
1
2
Turn off the computer and close the LCD screen lid.  
Slide the battery lock switch (1) to the UNLOCK position.  
3
Slide the battery into the battery compartment until it clicks into place.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
23  
Getting Started  
4
Slide the battery lock switch (1) to the LOCK position to secure the battery on the computer.  
When the computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.  
!
This computer is designed to operate only with genuine Sony batteries.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
24  
Getting Started  
Charging the Battery Pack  
The battery pack supplied with your computer is not fully charged at the time of purchase.  
To charge the battery pack  
1
2
Install the battery pack.  
Connect the AC adapter to the computer.  
The computer automatically charges the battery (the battery indicator light flashes in a double blink pattern as the battery  
charges). When the battery is about 85% charged, the battery indicator turns off.  
Battery indicator light status  
Meaning  
On  
The computer is using battery power.  
The battery is running out of power.  
The battery is charging.  
Blinks  
Double blinks  
Off  
The computer is using AC power.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
25  
Getting Started  
When the battery is running out of power, both the battery and power indicator lights blink.  
Keep the battery pack in the computer while it is directly connected to AC power. The battery pack continues to charge while you are using the computer.  
If the battery level falls below 10%, you should either attach the AC adapter to recharge the battery or shut down the computer and install a fully charged  
battery.  
The battery pack supplied with the computer is a lithium ion battery and can be recharged any time. Charging a partially discharged battery does not  
affect battery life.  
The battery indicator light is on while you use the battery pack as a power source. When the battery life is nearly depleted, both the battery and power  
indicator lights start flashing.  
For some software applications and some peripheral devices, the computer may not enter Hibernate mode even when battery life is low. To avoid loss  
of data when using battery power, you should save your data frequently and manually activate a power management mode, such as Standby or  
Hibernate. If the battery wears out when the computer enters Standby mode, you will lose any unsaved data. Going back to the previous work state is  
impossible. To avoid loss of data, you should save your data frequently.  
When the computer is directly connected to AC power and has a battery pack installed, it uses power from the AC outlet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
26  
Getting Started  
Removing the Battery Pack  
!
You may lose data if you remove the battery pack while the computer is on and not connected to the AC adapter or if you remove the battery while the  
computer is in Standby mode.  
To remove the battery pack  
1
2
Turn off the computer and close the LCD screen lid.  
Slide the battery lock switch (1) to the UNLOCK position.  
3
Slide and hold the battery release latch (2) and slide the battery away from the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
27  
Getting Started  
Shutting Down Your Computer Safely  
To avoid losing unsaved data, be sure to shut down your computer properly, as described below.  
To shut down your computer  
1
2
Turn off any peripherals connected to the computer.  
Click Start and then Turn Off Computer.  
The Turn off computer window appears.  
3
4
Click Turn Off.  
Respond to any prompts warning you to save documents or to consider other users and wait for the computer to turn off  
automatically.  
The power indicator light turns off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
28  
Using Your VAIO Computer  
Using Your VAIO Computer  
This section describes how to get the most out of using your computer.  
Using the Keyboard (page 29)  
Using the Touch Pad (page 31)  
Using Special-function Buttons (page 32)  
Using the Built-in MOTION EYE Camera (page 33)  
Using the Optical Disc Drive (page 34)  
Using PC Cards (page 44)  
Using the ExpressCard Media (page 47)  
Using the Memory Stick Media (page 50)  
Using Other Memory Cards (page 54)  
Using the Internet (page 57)  
Using Wireless LAN (WLAN) (page 58)  
Using the Bluetooth Functionality (page 67)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
29  
Using Your VAIO Computer  
Using the Keyboard  
Your keyboard is very similar to a desktop computer keyboard, but has additional keys that perform model-specific tasks.  
Combinations and Functions with the Fn Key  
Some functions are not available until Windows is launched.  
Combinations/Feature  
Functions  
Fn + 8 (F5/F6): brightness control  
Adjusts the LCD brightness of your computer screen.  
To increase lightness intensity, press Fn+F6 and then M or ,, or keep pressing Fn+F6.  
To decrease lightness intensity, press Fn+F5 and then m or <, or keep pressing Fn+F5.  
Toggles among your computer screen, an external display, and simultaneous output to both.  
Fn +  
/T (F7): display output  
!
When the computer is attached to the optional multi function bay docking station, this shortcut key toggles  
between your computer screen and the external display(s) connected to the docking station.  
Changes the screen resolution to magnify/restore your computer's screen view.  
Fn +  
(F10): zoom  
The magnified view is not as clear as the standard view, as it is implemented by applying a lower resolution  
to the computer screen with a higher resolution.  
This key combination is disabled during video playback. Make sure to quit such software before pressing  
the key combination.  
This key combination may not work with graphic images as it magnifies the screen view by changing the  
resolution.  
The location and size of software windows may change when the screen view is magnified or the standard  
view is restored because pressing this key combination changes the resolution.  
When your computer's screen view is magnified, switching the view to the external display disables the  
function and restores the standard view.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
30  
Using Your VAIO Computer  
Combinations/Feature  
Functions  
Provides for the lowest level of power consumption. When you execute this command, the  
states of the system and the peripheral devices are written to the hard disk and the system  
power is turned off. To return the system to its original state, use the power button to turn on the  
power.  
Fn +  
(F12): Hibernate  
For details on power management, see Using the Power Saving Modes (page 108).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
31  
Using Your VAIO Computer  
Using the Touch Pad  
The keyboard contains a cursor-pointing device, the touch pad (1). You can point to, select, drag, and scroll objects on the  
screen using the touch pad.  
Action  
Point  
Description  
Slide one finger on the touch pad to place the pointer (2) on an item or object.  
Press the left button (3) once.  
Click  
Double-click  
Right-click  
Drag  
Press the left button twice.  
Press the right button (4) once. In many applications, this action displays a shortcut menu.  
Slide one finger on the touch pad while pressing the left button.  
Scroll  
Move your finger along the right edge of the touch pad to scroll vertically. Move your finger along the bottom to scroll  
horizontally (the scroll function is available only with applications that support a touch pad scroll feature).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
32  
Using Your VAIO Computer  
Using Special-function Buttons  
Your computer is equipped with special buttons to help you use specific functions of the computer.  
Special-function button  
Functions  
By default, the S1 button places the computer in Standby mode and the S2 button toggles among your  
computer screen, an external display, and simultaneous output to both. You can change these button  
assignments on the window for changing the S button assignments. To display this window, press and hold  
either button or launch and navigate through VAIO Central.  
S1/S2 buttons  
Turns the volume on and off.  
Muting button  
Decrease (-) and increase (+) the volume.  
VOL buttons  
(Volume down and Volume up)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
33  
Using Your VAIO Computer  
Using the Built-in MOTION EYE Camera  
Your computer may be equipped with a built-in MOTION EYE camera. See the online Specifications to find whether your  
model is equipped with the built-in MOTION EYE camera.  
The built-in MOTION EYE camera adds video functionality to instant messaging software and video editing software, for  
example Windows Messenger and Windows MovieMaker.  
Turning on the computer activates the built-in MOTION EYE camera, so the computer is ready for a video conference using  
such software.  
Note that launching or exiting your instant messaging or video editing software does not activate or deactivate the MOTION  
EYE camera, respectively. Make sure that the camera is activated before using the software.  
The built-in MOTION EYE camera cannot be shared by more than one software application. If another software application is using the camera, exit the  
application before using the built-in MOTION EYE camera.  
!
The viewer window may show some noises, for example horizontal streaks, if you view a rapid-moving object. This is normal and does not indicate a  
malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
34  
Using Your VAIO Computer  
Using the Optical Disc Drive  
Your computer is equipped with an optical disc drive.  
To insert a disc  
1
2
Turn on the computer.  
Press the drive eject button (1) to open the drive.  
The tray slides out.  
3
Place a disc in the middle of the tray with the label side facing up and gently push it until the disc clicks into place.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
35  
Using Your VAIO Computer  
4
Close the tray by pushing it in gently.  
!
Do not remove the optical disc when the computer is in a power saving mode (Standby or Hibernate). Doing so may cause the computer to malfunction.  
If you plan to use an external optical disc drive, connect the drive before you launch any preinstalled CD/DVD program.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
36  
Using Your VAIO Computer  
Reading and Writing CDs and DVDs  
Your computer plays and records CDs and DVDs, depending on the model you purchased. Check your specifications for the  
type of optical disc drive installed on your model. Use the table below to see which types of media your optical disc drive  
supports.  
Optical disc drive  
Plays  
Records to  
DVD-ROM  
CD, CD-R, CD-RW, DVD, most DVD-R, DVD-RW,  
DVD+R, DVD+RW, DVD+R DL (Double Layer), and  
DVD-R DL (Dual Layer)  
CD-RW/DVD-ROM  
CD, CD-R, CD-RW, DVD, most DVD-R, DVD-RW,  
DVD+R, DVD+R DL (Double Layer),  
CD-R and CD-RW  
DVD-R DL (Dual Layer), and DVD+RW  
DVD RW (Supporting DVD+R DL)  
DVD RW/+R DL/RAM  
CD, CD-R, CD-RW, DVD, most DVD-R, DVD-RW,  
DVD+R, DVD+R DL (Double Layer),  
DVD-R DL (Dual Layer), and DVD+RW  
CD-R, CD-RW, DVD-R, DVD-RW, DVD+R,  
DVD+R DL (Double Layer), and DVD+RW  
CD, CD-R, CD-RW, DVD, most DVD-R, DVD-RW,  
DVD+R, DVD+R DL (Double Layer),  
CD-R, CD-RW, DVD-R, DVD-RW, DVD+R,  
DVD+R DL (Double Layer), DVD+RW,  
*
*
DVD-R DL (Dual Layer), DVD+RW, and DVD-RAM  
and DVD-RAM  
DVD RW (Supporting DVD R DL)  
DVD RW/ R DL/RAM  
CD, CD-R, CD-RW, DVD, most DVD-R, DVD-RW,  
DVD+R, DVD+R DL (Double Layer),  
DVD-R DL (Dual Layer), and DVD+RW  
CD-R, CD-RW, DVD-R, DVD-RW, DVD+R,  
DVD+R DL (Double Layer), DVD-R DL (Dual Layer),  
and DVD+RW  
CD, CD-R, CD-RW, DVD, most DVD-R, DVD-RW,  
DVD+R, DVD+R DL (Double Layer),  
CD-R, CD-RW, DVD-R, DVD-RW, DVD+R,  
DVD+R DL (Double Layer), DVD-R DL (Dual Layer),  
*
*
DVD-R DL (Dual Layer), DVD+RW, and DVD-RAM  
DVD+RW, and DVD-RAM  
*
On selected models only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
37  
Using Your VAIO Computer  
!
This product is designed to playback discs that conform to the Compact Disc Digital Audio standard specifications (CD Standard). A DualDisc is a two  
sided disc product which mates DVD recorded material on one side with digital audio material on the other side. Please be aware that the audio side  
(non-DVD side) of a DualDisc may not play on this product because it does not conform to the CD Standard.  
!
Due to the multiple formats of discs now available, when buying pre-recorded or blank discs for use with a VAIO computer, be sure to read the notices  
on the disc packaging carefully to check both playback and recording compatibility with your computer's optical disc drives. Sony does NOT guarantee  
the compatibility of VAIO CD drives with discs that are not compliant with the official "CD" format standard (or "DVD" standard in relation to DVD drives).  
USING NON-COMPLIANT DISCS CAN CAUSE FATAL DAMAGE TO YOUR VAIO PC OR CREATE SOFTWARE CONFLICTS AND CAUSE SYSTEM HANGING.  
For inquiries about disc formats, contact the individual publisher of the pre-recorded disc or the manufacturer of the recordable disc.  
Supports writing data to DVD-RW discs compliant with DVD-RW version 1.1/1.2.  
Supports writing data to DVD-R discs compliant with DVD-R for General version 2.0/2.1.  
Supports 8cm disc reading, but does not support 8cm disc writing.  
Writing data to DVD+R DL (Double Layer) discs is available only on discs supporting DVD+R DL (Double Layer) recording.  
Writing data to DVD-R DL (Dual Layer) discs is available only on discs supporting DVD-R DL (Dual Layer) recording.  
The DVD RW/RAM disc drive on your computer does not support the DVD-RAM cartridge. Use non-cartridge discs or discs with removable cartridge.  
Writing data to single-sided DVD-RAM discs (2.6 GB) compliant with DVD-RAM version 1.0 is not supported.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
38  
Using Your VAIO Computer  
Notes on writing data to a disc  
To make the data on a disc readable on an optical disc drive, you need to close the session before you eject it. To complete  
this process, follow the instructions included with your software.  
Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc  
drive.  
Do not strike or shake the computer while writing data to a disc.  
Deactivate the screen saver and exit anti-virus software before writing data to a disc.  
Do not use memory-resident utility software while writing data to a disc. This may cause the computer to malfunction.  
When using your software application to burn discs, make sure you exit and close all other applications.  
Never touch the surface of the disc. Fingerprints and dust on the surface of a disc may cause writing errors.  
Do not switch power modes while using the pre-installed software and while using the CD burning software.  
Never affix an adhesive label to discs. This will affect the use of the disc irreparably.  
Connect and use the AC adapter to power the computer or make sure your battery is at least 50 percent charged.  
Some DVD players and computer's DVD drives may not be able to play DVDs created on applicable models using the  
VAIO Zone software.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
39  
Using Your VAIO Computer  
Notes on playing DVDs  
To achieve optimum performance when playing DVDs, you should follow these recommendations.  
You can play DVDs using the optical disc drive and the DVD playback software, such as VAIO Zone or WinDVD. See the  
help file on such software for details.  
Close all open applications before playing a DVD movie.  
Do not use memory-resident utility software to speed up disc access when playing a DVD. This may cause the computer  
to malfunction.  
Deactivate the screen saver and exit anti-virus software before playing a disc.  
Some discs recorded at 20 or 24 bits may produce noise while playing. If you have audio devices connected, this may  
damage your hearing and the speakers. Reduce the volume before playing a DVD.  
Do not switch to power saving modes while the computer is playing a DVD.  
Region code indicators are labeled on the DVDs to indicate in which region and on what type of player you can play the  
disc. If the DVD is labeled "all," this means that you can play this DVD in most regions of the world. If the region code of  
your residence area is different from the label on the DVD disc or on the packaging, you cannot play the disc on your  
computer.  
!
You can change the DVD region code only a limited number of times. When you have exceeded this number, the drive's DVD region code is permanently  
assigned and you will not be able to change it again. Reconfiguring the computer does not reset this count.  
If you change the DVD region code while the WinDVD software is running, restart the software or eject the disc and re-insert it to make the new setting  
effective.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
40  
Using Your VAIO Computer  
If your computer has the Wireless LAN functionality and Wireless LAN is activated, playing DVDs may cause some  
interruptions in audio and video.  
When you are playing a DVD (video or audio) and you want to remove a USB device, such as USB-compatible speakers,  
make sure you stop the DVD first. Removing a USB-compatible device during DVD (video or audio) playback may cause  
a malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
41  
Using Your VAIO Computer  
Playing CDs  
To play an audio CD  
1
2
Insert a disc into the optical disc drive.  
If nothing appears on the desktop, then click Start, point to All Programs, and click to open a CD program, such as the  
SonicStage software.  
If the Audio CD window appears, click to select an option.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
42  
Using Your VAIO Computer  
Copying Files to CDs  
See the online Specifications to find the type of your optical disc drive, and then Reading and Writing CDs and DVDs  
(page 36) to find about the supported disc media.  
To copy files to a disc  
!
Do not strike or shake the computer while writing data to a disc.  
1
Insert a blank disc into the optical disc drive.  
If the CD Drive window appears, click Take no action and then click OK.  
2
3
Right-click Start and then click Explore.  
In the Folders panel on the left, locate the file(s) or folder(s) you want to copy, right-click the file(s) or folder(s), point to  
Send To, and then click the optical disc drive* name.  
Close the window.  
4
5
6
Click Start and then My Computer.  
Click the optical disc drive icon under Devices with Removable Storage. A new window appears with the file(s) or  
folder(s) you want to copy listed under Files Ready to Be Written to the CD.  
7
8
*
In the CD Writing Tasks box, click Write these files to CD.  
Follow the instructions in the CD Writing Wizard.  
The read/write drive letter designation may vary, depending on your system's hardware configuration.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
43  
Using Your VAIO Computer  
Playing DVDs  
To play a DVD  
1
2
3
Close all open programs.  
Insert a DVD into the optical disc drive.  
If nothing appears on the desktop, then click Start, point to All Programs, and click to open a DVD program to play the  
DVD.  
For instructions on how to use a program, see the help file included with the DVD program.  
Copying Files to DVDs  
The DVD writing function is available on selected models only. See the online Specifications to find the type of your optical  
disc drive, and then Reading and Writing CDs and DVDs (page 36) to find about the supported disc media.  
To copy files to a disc  
1
2
3
Connect the AC adapter to the computer.  
Insert a disc into the optical disc drive.  
If nothing appears on the desktop, then click Start, point to All Programs, and click to open a DVD program you want to  
use.  
For instructions on how to use a program, see the help file included with the DVD program.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
44  
Using Your VAIO Computer  
Using PC Cards  
PC Cards allow you to connect portable external devices to your computer.  
Inserting a PC Card  
!
Some PC Cards or their functions may not be compatible with the computer.  
You do not need to shut down the computer before inserting or removing a PC Card.  
To insert a PC Card  
1
2
3
4
5
Push the PC Card release button so that the release button pops out.  
Push the PC Card release button a second time so that the PC Card slot protector pops out.  
Gently take hold of the protector and pull it out of the slot.  
Insert the PC Card into the PC Card slot with the front label facing up.  
Gently push the PC Card into the slot.  
The PC Card is automatically detected by your system.  
The Safely Remove Hardware icon appears on the taskbar.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
45  
Using Your VAIO Computer  
!
Insert the PC Card slot protector to protect against debris entering the slot when not using a PC Card. Before moving the computer, make sure to insert  
the PC Card slot protector into the slot.  
Some devices may not function properly if you continually switch to Normal mode from Standby mode or Hibernate mode. For some PC Cards, if you  
alternate between Normal mode and Standby or Hibernate mode while the card is inserted, you may find that a device connected to your system is not  
recognized. Restart your system to correct the problem. Restarting will restore the original state of the computer.  
While the card is inserted, the computer may not enter Hibernate power management mode. It may enter Standby mode. We recommend that you  
remove the card before the computer enters Hibernate mode.  
Make sure you use the most recent software driver provided by the PC Card manufacturer.  
If an "!" mark appears on the Device Manager tab in the System Properties window, remove the software driver and then reinstall it.  
Do not force a PC Card into the slot. It may damage the connector pins. If you have difficulty inserting a PC Card, check that you are inserting the PC  
Card in the correct direction. See the manual that came with your PC Card for more information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
46  
Using Your VAIO Computer  
Removing a PC Card  
Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your system may not  
work properly.  
To remove a PC Card  
To remove a PC Card when the computer is off, skip steps 1 to 6.  
1
Double-click the Safely Remove Hardware icon on the taskbar.  
The Safely Remove Hardware window appears.  
2
3
Select the hardware you want to unplug.  
Click Stop.  
The Stop a Hardware Device window appears.  
4
5
Confirm that the device can be safely removed from the system.  
Click OK.  
A window appears, explaining that it is safe to remove the device.  
6
7
8
9
Click Close.  
Push the PC Card release button so that the release button pops out.  
Push the PC Card release button a second time so that the PC Card pops out.  
Gently take hold of the Card and pull it out of the slot.  
10 If the PC Card release button is still out, push it back in.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
47  
Using Your VAIO Computer  
Using the ExpressCard Media  
Your computer is equipped with an ExpressCard/34* slot to accommodate ExpressCard/34* (34 mm wide) media. You  
can use this slot to transfer data among digital cameras, camcorders, music players, and other audio/video devices.  
*
Hereinafter, referred to as the ExpressCard/34 slot and the ExpressCard/34 media.  
The ExpressCard/34 slot can also accommodate other memory cards, including standard-size Memory Stick media, via the  
memory card adapter. See Using Other Memory Cards (page 54) for the instructions to use the memory card adapter and  
other memory cards.  
Inserting an ExpressCard Media  
!
Your computer is delivered with a slot protector in the ExpressCard/34 slot. Remove the slot protector before you use the ExpressCard/34 slot for the  
first time.  
Use care when inserting or removing the ExpressCard/34 media from the slot. Do not force it in or out of the slot.  
You do not need to shut down the computer before inserting or removing an ExpressCard/34 media.  
To insert an ExpressCard media  
1
2
3
Push the ExpressCard/34 slot protector to pop it out.  
Gently take hold of the protector and pull it out of the slot.  
Hold the ExpressCard/34 media with the arrow facing up and toward the ExpressCard/34 slot.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
48  
Using Your VAIO Computer  
4
Carefully slide the ExpressCard/34 media (1) into the slot until it clicks into place.  
Do not force it into the slot.  
!
Insert the ExpressCard/34 slot protector to protect against debris entering the slot when not using an ExpressCard/34 media. Before moving the  
computer, make sure to insert the ExpressCard/34 slot protector into the slot.  
If the media or adapter does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.  
Make sure you use the most recent software driver provided by the ExpressCard/34 media manufacturer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
49  
Using Your VAIO Computer  
Removing an ExpressCard Media  
Follow the steps below to remove the ExpressCard/34 media while your computer is on. If it is not removed properly, your  
system may not work properly.  
To remove an ExpressCard media  
To remove an ExpressCard/34 media when the computer is off, skip steps 1 to 6.  
1
Double-click the Safely Remove Hardware icon on the taskbar.  
The Safely Remove Hardware window appears.  
2
3
Select the hardware you want to unplug.  
Click Stop.  
The Stop a Hardware Device window appears.  
4
5
Confirm that the device can be safely removed from the system.  
Click OK.  
A window appears, explaining that it is safe to remove the device.  
6
7
8
Click Close.  
Push in the ExpressCard/34 media toward the computer to pop it out.  
Gently take hold of the ExpressCard/34 media and pull it out of the slot.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
50  
Using Your VAIO Computer  
Using the Memory Stick Media  
Your computer supports the Memory Stick media. Memory Stick media is a compact, portable, and versatile device especially  
designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile phones and other  
devices. Because it is removable, it can be used for external data storage.  
For the latest information on Memory Stick media, visit the Sony online support Web site at http://esupport.sony.com/EN/  
VAIO/ for customers in USA, at http://www.sony.ca/support for customers in Canada, or at http://esupport.sony.com/ES/ for  
customers in Latin American countries or areas.  
!
Your computer has been tested and found compatible with the Sony branded Memory Stick media with capacity of up to 4 GB that are available as of  
January 2006. However, not all Memory Stick media that meet the same conditions as the compatible media are guaranteed of compatibility.  
Write-protecting a Memory Stick Media  
Some versions of Memory Stick media are designed with an erasure prevention switch to protect valuable data from  
accidental erasure or overwriting.  
Move the tab horizontally or vertically* to set or release write-protection. When the erasure prevention switch is off, data can  
be saved on the Memory Stick media. When the erasure prevention switch is on, data can be read from but not saved on the  
Memory Stick media.  
*
Some versions of Memory Stick media do not have an erasure prevention switch.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
51  
Using Your VAIO Computer  
Inserting a Memory Stick Media  
There are two ways you can insert a Memory Stick media into your computer.  
Using the Memory Stick Duo/PRO Duo media slot  
The Memory Stick media slot accommodates a small-size Memory Stick media: Memory Stick Duo or Memory Stick PRO  
Duo media.  
Using the ExpressCard/34 slot  
To insert a standard-size Memory Stick media, use the ExpressCard/34 slot. To do this, you need the supplied memory  
card adapter. See Using the ExpressCard Media (page 47) and Using Other Memory Cards (page 54) for more  
information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
52  
Using Your VAIO Computer  
To insert a Memory Stick media using the Memory Stick Duo/PRO Duo media slot  
1
2
Hold the Memory Stick media with the arrow facing up and toward the Memory Stick Duo/PRO Duo media slot.  
Carefully slide the Memory Stick media into the slot until it clicks into place.  
The Memory Stick media is automatically detected by your system and appears in your My Computer window as a local  
drive, under the appropriate letter (depending on the configuration of the computer).  
!
Be sure to hold the Memory Stick media with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging the computer  
or the Memory Stick media, do not force the Memory Stick media into the slot if it does not insert smoothly.  
Do not insert more than one Memory Stick media into the slot. Inserting the media improperly may damage the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
53  
Using Your VAIO Computer  
The computer supports Memory Stick Duo media and is equipped with the Memory Stick Duo/PRO Duo slot that is only compatible with the duo-size  
media. For more information on Memory Stick Duo media, visit the Memory Stick web site at http://www.memorystick.com/en/.  
To view the contents of the Memory Stick media  
1
Click Start and then My Computer to open the My Computer window.  
2
Double-click the Memory Stick media icon to view the list of data files saved in the Memory Stick media.  
To format a Memory Stick media  
Use the Memory Stick Formatter software. See the help file on the Memory Stick Formatter software for details.  
Removing a Memory Stick Media  
To remove a Memory Stick media from the Memory Stick Duo/PRO Duo media slot  
1
2
Check that the Memory Stick Duo/PRO Duo media indicator is off.  
Push the Memory Stick media in toward the computer.  
The Memory Stick media ejects.  
3
Pull the Memory Stick media out of the slot.  
!
Always remove the Memory Stick media gently, or it may pop out unexpectedly.  
Do not remove the Memory Stick media while the Memory Stick Duo/PRO Duo media indicator is turned on. If you do, you may lose data. Large volumes  
of data may take time to load, so be sure the indicator is off before removing the Memory Stick media.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
54  
Using Your VAIO Computer  
Using Other Memory Cards  
Your computer is delivered with the memory card adapter for the ExpressCard/34 slot to support the following memory cards  
besides the ExpressCard/34 media:  
Standard-size Memory Stick and Memory Stick PRO  
Secure Digital (SD)  
MultiMediaCard (MMC)  
xD-Picture Card  
!
The MagicGate feature of the Memory Stick media and the Memory Stick PRO media is not supported.  
The copyright protection and high-speed data transfer features of the SD memory card are not supported.  
As for the Memory Stick PRO media, only Sony branded media is recommended to use with the adapter.  
Your computer has been tested and found compatible only with major memory card media available as of January 2006. However, not all memory card  
media that meet the same conditions as the compatible media are guaranteed of compatibility.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
55  
Using Your VAIO Computer  
Inserting a Memory Card  
To insert a memory card to the memory card adapter  
1
Insert any one of the memory cards (2) to the memory card adapter (1).  
!
Make sure to insert a memory card into the memory card adapter in the correct direction to avoid possible damage to the memory card adapter.  
2
See Inserting an ExpressCard Media (page 47) to insert the memory card adapter into the ExpressCard/34 slot.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
56  
Using Your VAIO Computer  
Removing a Memory Card  
To remove a memory card from the memory card adapter  
See Removing an ExpressCard Media (page 49) to remove the memory card adapter from the ExpressCard/34 slot. Then,  
firmly grasp the extended part of the memory card and carefully pull it out of the memory card adapter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
57  
Using Your VAIO Computer  
Using the Internet  
Setting Up a Dial-up Internet Connection  
Before you can connect to the Internet, you need to connect your computer to a telephone line with a telephone cable (may  
not supplied). Once you have set up your telephone cable connection, you're ready to connect to the Internet.  
To connect a telephone cable  
1
2
Plug one end of the phone cable (1) into the modem port  
Plug the other end into the wall jack (2).  
on the computer.  
The computer does not work with party lines, cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a  
private branch exchange (PBX). Some of these connections may result in excess electrical current and could cause a malfunction in the internal modem.  
If you connect a telephone cable coming through a splitter, the modem or connected device may not work properly.  
To set up a dial-up connection to the Internet  
1
Click Start, point to All Programs, Accessories, Communications, and click New Connection Wizard.  
The New Connection Wizard appears.  
2
3
4
Click Next. If the Location Information window appears, follow the on-screen instructions.  
If it is not already selected, click to select Connect to the Internet, and click Next.  
Follow the on-screen instructions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
58  
Using Your VAIO Computer  
Using Wireless LAN (WLAN)  
Using the Sony Wireless LAN (WLAN), all your digital devices with built-in WLAN functionality communicate freely with each  
other through a powerful network. A WLAN is a network in which a user can connect to a local area network (LAN) through  
a wireless (radio) connection. So there is no need anymore to pull cables or wires through walls and ceilings.  
The Sony WLAN supports all normal Ethernet activities, but with the added benefits of mobility and roaming. You can still  
access information, internet/intranet and network resources, even in the middle of a meeting, or as you move from one place  
to another.  
You can communicate without an access point, which means that you can communicate between a limited number of  
computers (ad-hoc). Or you can communicate through an access point, which allows you to create a full infrastructure  
network (infrastructure).  
In some countries, using WLAN products may be restricted by the local regulations (e.g. limited number of channels). Therefore, before activating the  
WLAN functionality, read the Safety Information carefully.  
*
WLAN uses the IEEE 802.11a /b/g standard, which specifies the used technology. The standard includes the encryption method: Wired Equivalent  
Privacy (WEP), which is a security protocol and WiFi Protected Access (WPA - Proposed jointly by the IEEE and Wi-Fi Alliance, WiFi Protected Access  
is a specification of standards based, interoperable security enhancements that increase the level of data protection and access control for existing WiFi  
networks. WPA has been designed to be forward compatible with the IEEE 802.11i specification. It utilizes the enhanced data encryption TKIP (Temporal  
Key Integrity Protocol) in addition to user authentication using 802.1X and EAP (Extensible Authentication Protocol)). Data encryption protects the  
vulnerable wireless link between clients and access points. Besides that, there are other typical LAN security mechanisms to ensure privacy, such as:  
password protection, end-to-end encryption, virtual private networks, and authentication.  
* See the online Specifications to see whether your model supports the IEEE 802.11a standard.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
59  
Using Your VAIO Computer  
Wireless LAN devices using the IEEE 802.11a standard and the ones using the IEEE 802.11b or g standard cannot communicate because the frequencies  
are different.  
IEEE 802.11b: The standard speed is 11 Mbps, or about 30 to 100 times faster than a standard dial up.  
IEEE 802.11a/g: The standard speed is 54 Mbps, or about 5 times faster than a Wireless LAN device using the IEEE 802.11b standard.  
The 2.4 GHz bandwidth used by wireless LAN compatible devices is also used by other various devices. Although technologies to minimize interference  
from other devices that use the same bandwidth are employed on wireless LAN compatible devices, such interference may cause lower communication  
speed, narrower communication range, or broken wireless connections.  
The communication speed varies depending on the distance between communication devices, existence of obstacles between such devices, the device  
configuration, the radio conditions, and the software in use. In addition, communications may be cut off depending on the radio conditions.  
The communication range varies depending on the actual distance between communication devices, existence of obstacles between such devices, the  
radio conditions, the ambient environment that includes existence of walls and materials of such walls, and the software in use.  
Deploying IEEE 802.11b and IEEE 802.11g products on the same wireless network may reduce the communication speed due to radio interference.  
Taking this into consideration, the IEEE 802.11g products are designed to reduce the communication speed to ensure communications with  
IEEE 802.11b products.  
When the communication speed is not as fast as expected, changing the wireless channel on the access point may increase the communication speed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
60  
Using Your VAIO Computer  
Communicating without an Access Point (Ad-hoc)  
An ad-hoc network is a network in which a local network is created only by the wireless devices themselves, with no other  
central controller or access point. Each device communicates directly with other devices in the network. You can set up an  
ad-hoc network easily at home.  
If the Wireless connection is initiated by the VAIO computer, channel 11 will be selected.  
If the Wireless connection is initiated by peer Wireless LAN equipment, the Wireless LAN communication will make use  
of the channel selected by the peer Wireless LAN equipment.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
61  
Using Your VAIO Computer  
To communicate without an access point (ad-hoc)  
1
Turn on the WIRELESS or WIRELESS LAN switch.  
The WIRELESS LAN indicator lights up.  
Except in Peru and Venezuela, you cannot select the 5 GHz bandwidth, which is used for the IEEE 802.11a standard, on  
ad-hoc networks.  
On models that support the Bluetooth functionality*1 and/or the IEEE 802.11a/b/g standard*1, double-click  
(
/
)
on the taskbar to display the Wireless Device Switch window. Select your desired wireless option(s) and click OK.  
2
3
4
Click Start and then Control Panel.  
Click Network and Internet Connections.  
Click Network Connections.  
The Network Connections window appears.  
5
Right-click Wireless Network Connection, then click Properties.  
The Wireless Network Connection Properties window appears.  
6
7
Select the Wireless Networks tab.  
Click the Add… button.  
The Wireless network properties window appears.  
8
9
Enter a network name (SSID)*2.  
You can choose a 32-digit alphanumeric name.  
Select Open from the Network Authentication drop-down box.  
10 Select WEP from the Data Encryption drop-down box.  
11 Deselect the The key is provided for me automatically option button.  
Some information becomes visible.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
62  
Using Your VAIO Computer  
12 Enter the network key*2.  
The network key should be 5 or 13 alphanumeric characters or 10 or 26 hexadecimal*3 characters long. You can choose  
whichever you want.  
13 Enter exactly the same network key again, for confirmation.  
14 Select the check box This is a computer-to-computer (ad hoc) network; wireless access points are not used at the  
bottom of the window.  
15 Click OK.  
Your network name appears in the Preferred networks.  
16 Click Advanced.  
The Advanced window appears.  
17 Select the Computer-to-computer (ad hoc) networks only option button.  
18 Click Close.  
19 Click OK.  
The computer is ready to communicate with another computer.  
*1  
See the online Specifications to see whether your model supports the Bluetooth functionality and/or the IEEE 802.11a/b/g standard.  
*2  
If you want to communicate between two or more computers, you need to configure all these computers in the exact same way. This means that you need to enter the  
same network name and the same network key on all computers as on the first computer you configure.  
*3  
Hexadecimal: A number representation using the digits 0-9, with their usual meaning, plus the letters A-F (or a-f) to represent hexadecimal digits with values of (decimal)  
10 to 15.  
An ad-hoc network does not support WPA.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
63  
Using Your VAIO Computer  
To disconnect from a computer-to-computer (ad-hoc) network  
1
2
3
Click Start and then Control Panel.  
Click Network and Internet Connections.  
Click Network Connections.  
The Network Connections window appears.  
4
5
In the right panel under LAN or High-Speed Internet, right-click Wireless Network Connection.  
Click Properties.  
The Wireless Network Connection Properties window appears.  
6
On the Wireless Networks tab, click Advanced.  
The Advanced window appears.  
7
8
9
Click to select Any available network (access point preferred), and click Close.  
Click OK.  
Close the Network Connections window.  
10 Turn off the WIRELESS or WIRELESS LAN switch.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
64  
Using Your VAIO Computer  
Communicating with an Access Point (Infrastructure)  
An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an access  
point, for example the Sony Access Point. The access point bridges the wireless and wired LAN and acts as a central  
controller for the Wireless LAN. The access point coordinates transmission and reception from multiple wireless devices  
within a specific range.  
The access point will select which channel to use on an infrastructure network.  
!
For details on how to select the channel that will be used by the access point, see the manual that came with your access point.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
65  
Using Your VAIO Computer  
To connect to a wireless network  
1
Make sure an access point is set up.  
See the manual that came with your access point for more information.  
2
Turn on the WIRELESS or WIRELESS LAN switch.  
The WIRELESS LAN indicator lights up.  
On models that support the Bluetooth functionality* and/or the IEEE 802.11a/b/g standard*, double-click  
(
/
) on  
the taskbar to display the Wireless Device Switch window. Select your desired wireless option(s) and click OK.  
3
4
5
6
Click Start and then Control Panel.  
Click Network and Internet Connections.  
Click Network Connections.  
In the right panel under LAN or High-Speed Internet, double-click Wireless Network Connection.  
The Wireless Network Connection window appears.  
7
Follow the on-screen instructions.  
*
See the online Specifications to see whether your model supports the Bluetooth functionality and/or the IEEE 802.11a/b/g standard.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
66  
Using Your VAIO Computer  
To connect to a wireless network (Models with the Wireless Setup Utility software only)  
Use the Wireless Setup Utility software to guide you through the set up process and provide you with more detailed  
information about wireless connections.  
1
Make sure an access point is set up.  
See the manual that came with your access point for more information.  
2
Turn on the WIRELESS or WIRELESS LAN switch.  
The WIRELESS LAN indicator lights up.  
On models that support the Bluetooth functionality* and/or the IEEE 802.11a/b/g standard*, double-click  
(
/
) on  
the taskbar to display the Wireless Device Switch window. Select your desired wireless option(s) and click OK.  
3
Click Start, point to All Programs, and click Wireless Setup Utility.  
The Wireless Setup Utility appears.  
4
Follow the on-screen instructions.  
*
See the online Specifications to see whether your model supports the Bluetooth functionality and/or the IEEE 802.11a/b/g standard.  
To disconnect from a wireless network  
Turn off the WIRELESS or WIRELESS LAN switch.  
!
Turning off the wireless LAN functionality while accessing remote documents, files, or resources may result in data loss.  
For WPA-PSK or WPA2-PSK authentication, you must enter a network key of 8 to 64 alphanumeric characters long.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
67  
Using Your VAIO Computer  
Using the Bluetooth Functionality  
The Bluetooth functionality is available on selected models only. See the online Specifications to see whether your model  
supports the Bluetooth functionality.  
You can establish wireless communication between your computer and other Bluetooth devices such as another computer  
or a mobile phone. You can transfer data between these devices without cables and up to 33 feet (10 meters) range in open  
space.  
To connect to a Bluetooth device  
1
Turn on the WIRELESS switch.  
2
3
4
Double-click ) on the taskbar to display the Wireless Device Switch window.  
(
/
Select the Enable Bluetooth Device option.  
Click OK.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
68  
Using Your VAIO Computer  
Notes on using the Bluetooth functionality  
The data transfer rate varies, depending on the following conditions:  
Obstacles, such as walls, located between devices  
Distance between devices  
Material used in walls  
Proximity to microwaves and cordless telephones  
Radio frequency interference and other environmental conditions  
Device configuration  
Type of software application  
Type of operating system  
Use of both Wireless LAN and Bluetooth functionalities at the same time on the computer  
Size of file being exchanged  
Note that due to limitations of the Bluetooth standard, large files may occasionally be corrupted during continuous transfer  
due to electromagnetic interference from the environment.  
All Bluetooth devices must be certified to make sure that the applicable standard requirements are maintained. Even if  
standards are met, individual device performance, specifications, and operation procedures can vary. Data exchange may  
not be possible in all situations.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
69  
Using Your VAIO Computer  
The 2.4 GHz band, with which Bluetooth devices or wireless LAN devices work, is used by various devices. Bluetooth  
devices use the technology to minimize the interference from other devices that use the same wave length. Simultaneous  
use of the Bluetooth functionality and wireless communication devices, however, may cause radio interference and result  
in poorer communication speeds and distances than the standard values.  
The Bluetooth functionality may not work depending on the third party devices or the software version used by third party  
companies.  
As general characteristics of Bluetooth technology, connecting multiple Bluetooth devices to your computer may cause  
bandwidth congestion, resulting in poor performance of the devices.  
Bluetooth Security  
The Bluetooth wireless technology has an authentication function, which allows you to determine whom you choose to  
communicate. With the authentication function, you can avoid any anonymous Bluetooth device to access your computer.  
The first time two Bluetooth devices communicate, a common Passkey (a password required for authentication) should be  
determined for both devices to be registered. Once a device is registered, there is no need to re-enter the Passkey.  
The passkey can be different each time, but must be the same at both ends.  
For certain devices, such as a mouse, no passkey can be entered.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
70  
Using Your VAIO Computer  
Communicating with Another Bluetooth Device  
You can connect your computer to a Bluetooth device such as another computer, a mobile phone, a PDA, a headset, a  
mouse, or a digital camera without the use of any cables.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
71  
Using Your VAIO Computer  
To communicate with another Bluetooth device  
To communicate with another Bluetooth device, you need first to set up the Bluetooth functionality. For setting up and using  
the Bluetooth functionality, see the help file on the Bluetooth utility software.  
To see the help file  
1
Right-click the Bluetooth icon  
on the taskbar, and select Help from the menu.  
Stopping the Bluetooth Connection  
To stop the Bluetooth connection, turn off the WIRELESS switch. The Bluetooth indicator turns off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
72  
Using Your VAIO Computer  
Using the Bluetooth Headset  
The Bluetooth headset is available as an optional accessory. It will come in handy during a video conference over the Internet  
using instant messaging software, for example Windows Messenger. For details on using the Bluetooth headset, see the  
manual that came with your Bluetooth headset.  
To connect the headset with your computer  
1
2
Press and hold the headset power button for at least five seconds to turn on the Bluetooth headset.  
Press and hold the volume buttons until the indicator light blinks in red.  
3
4
5
6
Right-click the Bluetooth icon  
The Bluetooth Settings window appears and Add New Connection Wizard automatically starts.  
on the taskbar and select Bluetooth Settings from the menu.  
If the Add New Connection Wizard window does not appear, click New Connection.  
The Add New Connection Wizard window appears.  
Select Express Mode [Recommended] and then click Next.  
The wizard searches for Bluetooth devices in range and lists available devices, if any.  
Select HBH-608 and then click Next.  
The Bluetooth Manager-Bluetooth Security window appears when a connection is established.  
7
8
9
Enter "0000" for Bluetooth Passkey (PIN) and then click OK.  
Press the headset power button.  
Click Finish.  
The headset icon appears in the Bluetooth Settings window.  
10 Click the headset icon and then press the headset power button.  
The computer should now be ready to communicate with the Bluetooth headset.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
73  
Using Your VAIO Computer  
To disconnect the headset from your computer  
1
Right-click the Bluetooth icon  
on the taskbar and select Bluetooth Settings from the menu.  
The Bluetooth Settings window appears.  
Select Disconnect from the Bluetooth menu.  
Click Yes.  
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
74  
Using Peripheral Devices  
Using Peripheral Devices  
You can add functionality to your computer by using the various ports on the computer.  
Connecting a Multi Function Bay Docking Station (page 75)  
Connecting External Speakers (page 83)  
Connecting an External Display (page 84)  
Selecting Display Modes (page 92)  
Using the Multiple Monitors Function (page 93)  
Connecting an External Microphone (page 95)  
Connecting a Universal Serial Bus (USB) Device (page 96)  
Connecting a Printer (page 99)  
Connecting an i.LINK Device (page 100)  
Connecting to a Network (LAN) (page 102)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
75  
Using Peripheral Devices  
Connecting a Multi Function Bay Docking Station  
Attaching a multi function bay docking station enables you to connect additional peripherals to your computer, such as a  
printer and an external display.  
A multi function bay docking station is not supplied with your computer and is available as an optional accessory.  
Locating Ports on the Multi Function Bay Docking Station  
Back  
A DC IN port (page 20)  
*1  
B Hi-Speed USB (USB 2.0) ports (page 96)  
*2  
C DVI-D port (page 85)  
D MONITOR (VGA) port (page 85)  
E OPTICAL OUT port (Output frequency 96 kHz/48 kHz/44 kHz/  
Variable)  
Connect digital equipment such as an AV amplifier.  
*3  
F PHONES OUT jack (page 83)  
G VIDEO OUT port (page 89)  
H S VIDEO OUT port (page 89)  
I Network (Ethernet) port (1000BASE-T / 100BASE-TX /  
10BASE-T) (page 102)  
J Security slot  
*1  
Supports high-/full-/low- speeds.  
*2  
Enabled only when a model with the NVIDIA video controller is attached.  
*3  
Referred to as the headphones jack hereinafter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
76  
Using Peripheral Devices  
Front/Left  
A IN USE indicator (page 80)  
B UNDOCK button (page 80)  
C PUSH RELEASE button (page 80)  
D DC IN indicator  
Illuminates when the multi function bay docking station is  
powered.  
*
E Multi function bay  
*
F Multi function bay unit eject button  
*
See the manual that came with the optional multi function bay docking  
station.  
!
The multi function bay docking station can be powered only through the AC adapter supplied with the multi function bay docking station. Do not unplug  
the AC adapter from the multi function bay docking station and the AC outlet while using the multi function bay docking station; this may cause data  
damage or hardware malfunctions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
77  
Using Peripheral Devices  
Attaching Your Computer to the Multi Function Bay Docking Station  
!
When the computer has no battery inserted, do not attach the computer to the multi function bay docking station.  
The multi function bay docking station is equipped with a size adjuster for use with other VAIO models, which is described in the manual that came  
with the docking station. You do not need to use this size adjuster for your model.  
To attach your computer to the multi function bay docking station  
!
To prevent loss of unsaved data, be sure to turn off your computer before attaching it to the multi function bay docking station.  
1
2
3
Disconnect all peripherals from the computer.  
Plug the power cord (1) into the AC adapter (2) and an AC outlet.  
Plug the cable attached to the AC adapter (2) into the DC IN port (3) on the multi function bay docking station (4).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
78  
Using Peripheral Devices  
4
Slide open the multi function bay docking station connector cover on the bottom of the computer.  
5
Place the computer on the multi function bay docking station. Bring the arrows on the back of the computer and on the  
multi function bay docking station together so that the connector on the bottom of the computer comes in contact with that  
on the docking station.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
79  
Using Peripheral Devices  
6
Gently push down the computer until it clicks into place.  
7
Turn on the computer.  
!
Use the AC adapter supplied with the multi function bay docking station.  
Do not move the computer while attached to the multi function bay docking station; this may detach the multi function bay docking station and cause  
damage to the multi function bay docking station and the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
80  
Using Peripheral Devices  
Disconnecting Your Computer from the Multi Function Bay Docking Station  
!
To prevent loss of unsaved data, be sure to turn off the computer before disconnecting it from the multi function bay docking station.  
Be sure that no devices connected to the multi function bay docking station are in use before disconnecting the computer.  
Do not disconnect the computer from the multi function bay docking station when the IN USE indicator is lit. Disconnecting the computer while the IN  
USE indicator is lit may result in loss of unsaved data or a failure of the computer.  
When the battery is running out of power, disconnecting the computer from the multi function bay docking station may result in loss of unsaved data.  
Do not disconnect the computer from the multi function bay docking station during video playback. Be sure to close video playback software before  
disconnection.  
To disconnect your computer from the multi function bay docking station  
1
Press the UNDOCK button (1).  
If the IN USE indicator is unlit, you do not have to press the UNDOCK button.  
Pressing the UNDOCK button while the computer is in a power saving mode returns the computer to Normal mode first, and then initiates the  
disconnection process.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
81  
Using Peripheral Devices  
2
Wait until the IN USE indicator (2) turns off and then press the PUSH RELEASE button (3).  
3
Lift the computer away from the multi function bay docking station.  
4
Close the multi function bay docking station connector cover on the bottom of the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
82  
Using Peripheral Devices  
Alternatively, you can disconnect the computer from the multi function bay docking station as follows:  
1
2
Click Start and then Undock Computer.  
Make sure that a message balloon appears and the IN USE indicator turns off, and then press the PUSH RELEASE  
button.  
3
4
Lift the computer away from the multi function bay docking station.  
Close the multi function bay docking station connector cover on the bottom of the computer.  
It is extremely important to close the multi function bay docking station connector cover after disconnecting the computer from the multi function bay  
docking station. If the cover is left open, dust may get inside and damage the computer.  
To disconnect the multi function bay docking station completely from AC power, unplug the AC adapter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
83  
Using Peripheral Devices  
Connecting External Speakers  
You can enhance the sound quality of your computer by connecting external speakers.  
To connect external speakers  
1
2
3
Plug the speaker cable (1) into the headphones jack (2) on the computer or on the multi function bay docking station.  
Plug the other end of the speaker cable to the external speaker (3).  
Turn down the volume of the speakers before you turn them on.  
Make sure your speakers are designed for computer use.  
!
Do not place floppy disks on the speakers; their magnetic field may damage the data on the disks.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
84  
Using Peripheral Devices  
Connecting an External Display  
You can connect an external display to your computer. For example, you can use the computer with a computer display or a  
projector.  
Connecting a Computer Display (page 85)  
Connecting a Multimedia Computer Display (page 87)  
Connecting a TV (page 89)  
Connecting a Projector (page 90)  
Connect the power cord after connecting all other cables.  
Connected external displays are used as second screens.  
On Windows systems only, you can also use an external display to set up multiple monitors.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
85  
Using Peripheral Devices  
Connecting a Computer Display  
You can connect a computer display (monitor) either directly to your computer or via the optional multi function bay docking  
station.  
To connect a computer display  
!
The monitor (VGA) port on the computer is disabled when the computer is attached to the multi function bay docking station.  
1
2
If necessary, plug one end of the display's power cord (1) into the display, and the other end into an AC outlet.  
If you want to connect a VGA monitor, plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the  
computer or on the multi function bay docking station.  
3
If you want to connect a TFT/DVI monitor, plug the display cable (not supplied) into the DVI-D port on the multi function  
bay docking station.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
86  
Using Peripheral Devices  
DVI-D stands for Digital Visual Interface - Digital. It is a type of DVI connector that supports only digital video signals (no analog video signals). It has  
24 pins.  
A DVI-I connector (Digital Visual Interface - Integrated) supports digital video and analog video signals. It has 29 pins.  
!
You can use a TFT/DVI monitor only when a model with the NVIDIA video controller is attached to the multi function bay docking station.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
87  
Using Peripheral Devices  
Connecting a Multimedia Computer Display  
You can connect a multimedia computer display that includes built-in speakers and a microphone to your computer or via the  
optional multi function bay docking station.  
To connect a multimedia computer display  
!
The monitor (VGA) port on the computer is disabled when the computer is attached to the multi function bay docking station.  
1
2
Plug the power cord of the multimedia computer display (1) into an AC outlet.  
Plug the display cable (2) (not supplied) into the monitor (VGA) port (3) a on the computer or on the multi function bay  
docking station.  
3
4
Plug the speaker cable (4) into the headphones jack (5) on the computer or on the multi function bay docking station.  
Plug the microphone cable (6) into the microphone jack (7) m on the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
88  
Using Peripheral Devices  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
89  
Using Peripheral Devices  
Connecting a TV  
You can connect a TV directly to your computer or via the optional multi function bay docking station.  
To connect a TV to the computer  
1
2
Plug the power cord of the TV into an AC outlet.  
Plug one end of the S Video cable (not supplied) into the S VIDEO OUT port on the computer or on the multi function bay  
docking station and the other end to the TV.  
When your computer is attached to the multi function bay docking station, make sure to use the S VIDEO OUT port on  
the docking station.  
3
Plug one end of the audio cable (not supplied) into the headphones jack on the computer or on the multi function bay  
docking station and the other end to the TV.  
4
5
Switch the input channel of the TV to external input.  
Set up the TV configuration system.  
The multi function bay docking station is also equipped with a VIDEO OUT port. To connect a TV to this port, use a regular video cable.  
See the manual that came with your peripheral for more information on installation and use.  
If the display resolution of the computer is more than 1024 x 768 pixels, a part of the image cannot be displayed on your TV. The hidden area on your  
TV can be seen by moving the cursor on the computer. If you want to display the full image, change the display resolution of the computer to 1024 x  
768 pixels or lower.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
90  
Using Peripheral Devices  
Connecting a Projector  
You can connect a projector (for example, the Sony LCD projector) directly to your computer or via the optional multi function  
bay docking station.  
To connect a projector  
!
The monitor (VGA) port on the computer is disabled when the computer is attached to the multi function bay docking station.  
1
2
Connect the power cord (1) of the projector into an AC outlet.  
Plug the RGB signal cable (2) into the monitor (VGA) port (3) a on the computer or on the multi function bay docking  
station.  
3
4
Plug the audio cable (4) (not supplied) into the headphones jack (5) on the computer or on the multi function bay docking  
station.  
Plug the RGB signal cable and the audio cable into the jack and port on the projector (6).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
91  
Using Peripheral Devices  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
92  
Using Peripheral Devices  
Selecting Display Modes  
You can select which display to be used as the primary monitor when an external display (desktop monitor, etc.) is connected  
to your computer.  
The procedure for selecting a display depends on the video controller used in the computer. See the online Specifications  
for detailed information on the video controller.  
If you want to work on your computer screen and the external display at the same time, see Using the Multiple Monitors  
Function (page 93) for more information.  
To select a display  
Models with the Intel Graphics Media Accelerator  
1
2
3
Right-click on the desktop to display the context menu.  
Click the menu item for graphic properties.  
Follow the on-screen instructions to change the settings.  
You may not be able to display on your computer screen and the external display or projector at the same time, depending on the type of your external  
display or projector.  
Before turning on the computer, turn on the peripheral devices.  
Models with the NVIDIA video controller  
1
2
3
4
Right-click on the desktop and select NVIDIA Control Panel from the menu.  
Click the Display icon.  
Click Change Display Configuration.  
Follow the on-screen instructions to change the settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
93  
Using Peripheral Devices  
Using the Multiple Monitors Function  
The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you  
have an external display attached to the monitor (VGA) port, your computer screen and the external display can function as  
a single desktop.  
You can move the cursor from one display to the other. This allows you to drag objects, such as an open application window  
or a toolbar, from one display to the other.  
Your external display may not support the Multiple Monitors function.  
Certain software applications may not be compatible with Multiple Monitors settings.  
Make sure that the computer does not enter Standby or Hibernate mode while you are using Multiple Monitors mode; otherwise the computer may not  
return to Normal mode.  
If you set different colors on each display, do not divide one single window on two displays; otherwise your software may not work properly.  
Set fewer colors or a lower resolution for each display.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
94  
Using Peripheral Devices  
To select the Multiple Monitors mode  
!
To find which video controller your model includes, see the online Specifications.  
Models with the Intel Graphics Media Accelerator  
1
2
3
Right-click on the desktop to display the context menu.  
Click the menu item for graphic properties.  
Follow the on-screen instructions to change the settings.  
Models with the NVIDIA video controller  
1
2
3
4
Right-click on the desktop and select NVIDIA Control Panel from the menu.  
Click the Display icon.  
Click Change Display Configuration.  
Follow the on-screen instructions to change the settings.  
You can also change one of the S button assignments to activate the Multiple Monitors mode with the respective S button. To change the S button  
assignments, press and hold any S button to display the window for changing the assignment. For details on the S buttons, see Using Special-function  
Buttons (page 32).  
Additionally, you can set the display colors and resolution for each display and customize the Multiple Monitors mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
95  
Using Peripheral Devices  
Connecting an External Microphone  
If you need to use a sound input device (for example, to chat on the Internet) you need to plug in an external microphone.  
To connect an external microphone  
Plug the microphone cable (1) into the microphone jack (2) m.  
Make sure your microphone is designed for computer use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
96  
Using Peripheral Devices  
Connecting a Universal Serial Bus (USB) Device  
To prevent your computer and/or USB devices from damage, observe the following:  
When moving the computer with USB devices connected, avoid any shock or force to the USB ports.  
Do not put the computer into a bag or carrying case when it has USB devices connected.  
Connecting a USB Mouse  
To connect a USB mouse  
1
2
Choose the USB port (1)  
you prefer to use.  
Plug the USB mouse cable (2) into the USB port.  
You can now use your USB mouse (3).  
The VAIO USB mouse software driver is preinstalled on the computer. As a result, you only need to plug the USB mouse into the USB port and you can  
start working.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
97  
Using Peripheral Devices  
Connecting a USB Floppy Disk Drive  
You can purchase a USB floppy disk drive and connect it to your computer.  
To connect a USB floppy disk drive  
1
2
Choose the USB port (1)  
you prefer to use.  
Plug the USB floppy disk drive cable (2) into the USB port.  
Your USB floppy disk drive (3) is now ready for use.  
!
When using a USB floppy disk drive, do not apply force on the USB port. This may cause a malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
98  
Using Peripheral Devices  
Disconnecting a USB floppy disk drive  
You can disconnect a USB floppy disk drive when the computer is on or off. Disconnecting the drive when the computer is in  
a power saving mode (Standby or Hibernate) may cause the computer to malfunction.  
If the computer is off, you can unplug the USB cable directly from the computer.  
To disconnect a USB floppy disk drive  
1
2
Close all programs accessing the floppy disk drive.  
Double-click the Safely Remove Hardware icon on the taskbar.  
The Safely Remove Hardware window appears.  
3
4
Select the floppy disk drive you want to unplug.  
Click Stop.  
The Stop a Hardware device window appears.  
5
Make sure the floppy disk drive is selected, and click OK.  
A message appears stating it is now safe to remove the hardware device.  
6
7
Click Close to close the Safely Remove Hardware window.  
Remove the floppy disk drive from the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
99  
Using Peripheral Devices  
Connecting a Printer  
You can connect a Windows-compatible printer to your computer to print documents.  
Connecting a Printer Using the USB Port  
You can connect a USB printer compatible with your version of Windows to the computer.  
To connect a printer using the USB port  
1
Plug the printer power cord into an AC outlet (1).  
2
3
Choose the USB port (3) you prefer to use.  
Plug one end of a USB printer cable (2) into the USB port and the other end to your printer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
100  
Using Peripheral Devices  
Connecting an i.LINK Device  
Notes on connecting i.LINK devices  
The computer includes an i.LINK (IEEE 1394) port, which you can use to connect to an i.LINK device such as a digital  
video camcorder or to connect two VAIO computers in order to copy, delete or edit files.  
The i.LINK port on the computer does not supply power to external devices generally powered by i.LINK ports.  
The i.LINK port supports transfer rates up to 400 Mbps; however, the actual transfer rate depends on the transfer rate of  
the external device.  
i.LINK cables compatible with the computer include cables with the following part numbers:  
VMC-IL4415 (a 1.5 meter cable with a 4-pin connector at each end), VMC-IL4408 Series (a 0.8 meter cable with a 4-pin  
connector at each end).  
The optional i.LINK cables may not be available, depending on the country or area of your residency.  
An i.LINK connection with other compatible devices is not fully guaranteed.  
The i.LINK connection varies depending on the software applications, operating system and i.LINK compatible devices  
you use. Refer to the manual that came with your software for more information.  
Check the working conditions and OS compatibility of i.LINK-compatible PC peripherals (for example, an HDD or CD-RW  
drive) before you connect them to the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
101  
Using Peripheral Devices  
Connecting a Digital Video Camcorder  
To connect a digital video camcorder  
1
Plug one end of the i.LINK cable (1) into the i.LINK port (2) on the computer and the other end into the DV In/Out ports  
(3) on the digital video camcorder.  
2
Launch the DVgate Plus software.  
On Sony digital video cameras, ports labeled DV Out, DV In/Out or i.LINK are i.LINK-compatible.  
The Sony digital video camcorder shown here is an example; your digital video camcorder may need to be connected differently.  
You cannot access the pictures stored on a Memory Stick media when using an i.LINK connection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
102  
Using Peripheral Devices  
Connecting to a Network (LAN)  
You can connect your computer to 1000BASE-T*/100BASE-TX/10BASE-T-type networks via an Ethernet network cable.  
Connect one end of an optional network cable to the network (Ethernet) port on the computer or the optional multi function  
bay docking station and the other end to your network. For detailed settings and devices needed to connect to the network,  
see your network administrator.  
*
Available only via the network (Ethernet) port on the optional multi function bay docking station.  
The computer can be connected to the network with the default settings.  
When the computer is attached to the optional multi function bay docking station, you need to select which network (Ethernet) port to use. Follow the  
on-screen instructions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
103  
Using Peripheral Devices  
!
Telephone lines cannot be connected to the network (LAN) connector on your computer.  
If the network (LAN) connector is connected to the telephone lines mentioned below, high electric current to the connector may cause damage,  
overheating or fire.  
- Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone)  
- Public telephone subscriber line  
- PBX (private branch exchange)  
!
Do not plug a telephone cable into the network port.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
104  
Customizing Your VAIO Computer  
Customizing Your VAIO Computer  
This section briefly describes how to change the main settings of your computer. Among other things, you will learn how to  
use and customize the look of your Sony software and utilities, etc.  
Setting the Password (page 105)  
Setting Up Your Computer with VAIO Central (page 107)  
Using the Power Saving Modes (page 108)  
Managing Power with VAIO Power Management (page 113)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
105  
Customizing Your VAIO Computer  
Setting the Password  
Use one of the BIOS functions to set the password.  
Once you have set the password, you will have to enter the password after the VAIO logo appears to start your computer.  
The power-on password will allow you to protect your computer from unauthorized access.  
Adding the Power-on Password  
!
Once you have set the power-on password, you cannot start the computer without entering the password. Make sure not to forget the password. Write  
down your password and keep it safe and private from other people.  
If you forget the power-on password and need assistance to reset it, a password reset fee will be charged, and your computer may need to be sent in  
for depot service for password reset.  
To add the power-on password  
1
2
Turn on the computer.  
Press the F2 key when the VAIO logo appears.  
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo  
appears.  
3
4
5
Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the  
Enter key.  
On the password entry screen, enter the password twice and press the Enter key.  
The password can be up to 32 alphanumeric characters (including spaces) long.  
At the confirmation prompt, press the Enter key.  
The following is to configure the computer to prompt password entry when you turn it on or display the BIOS setup screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
106  
Customizing Your VAIO Computer  
6
7
Select Password when Power ON under Security.  
Press the space bar to change the setting from Disabled to Enabled.  
Press the < or , key to select Exit, select Exit (Save Changes) or Exit Setup, and then press the Enter key.  
On the Setup Confirmation screen, make sure that Yes is selected and then press the Enter key.  
Changing/Removing the Power-on Password  
To change or remove the power-on password  
1
2
Turn on the computer.  
Press the F2 key when the VAIO logo appears.  
The BIOS setup screen appears. If not, restart the computer and press the F2 key several times when the VAIO logo  
appears.  
3
4
Enter the current password for Enter Password and press the Enter key.  
Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the  
Enter key.  
5
On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.  
To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter  
key.  
When confirmation to save the changes is prompted, press the Enter key.  
6
Press the < or , key to select Exit, select Exit (Save Changes) or Exit Setup, and then press the Enter key.  
On the Setup Confirmation screen, confirm that Yes is selected and then press the Enter key.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
107  
Customizing Your VAIO Computer  
Setting Up Your Computer with VAIO Central  
The VAIO Central utility allows you to consult system information and specify preferences for system behavior.  
To use VAIO Central  
1
Click Start, point to All Programs, and click VAIO Central.  
The VAIO Central window appears.  
2
3
Select the desired control item and change the settings.  
Once finished, click OK.  
The setting of the desired item has been changed.  
Some of the control items will not be visible if you open VAIO Central as a limited user.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
108  
Customizing Your VAIO Computer  
Using the Power Saving Modes  
When you use a battery as the power source for your computer, you can take advantage of power management settings to  
conserve battery life. In addition to the normal operating mode, which allows you to turn off specific devices, your computer  
has two distinct power saving modes: Standby and Hibernate. When using battery power, you should be aware that the  
computer automatically enters Hibernate mode when the remaining battery charge becomes short, regardless of the power  
management setting you select.  
!
If the battery level falls below 10 percent, you should either attach the AC adapter to recharge the battery or shut down the computer and install a fully  
charged battery.  
Using Normal Mode  
This is the normal state of the computer when it is in use. The green power indicator light is on in this mode. To save power  
while not working, you can turn off a specific device such as the LCD screen or the hard disk.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
109  
Customizing Your VAIO Computer  
Using Standby Mode  
Standby mode turns off the LCD screen and sets the hard disk and the CPU to a low power consumption mode. The umber  
power light flashes in this mode.  
To activate Standby mode  
1
2
Click Start and then Turn Off Computer.  
Click Stand By.  
To return to Normal mode  
Press any key.  
!
If you press the power button for more than four seconds, the computer will turn off automatically. You will lose any unsaved data.  
When the computer is in Standby mode, you cannot insert a disc.  
The computer comes out of Standby mode quicker than out of Hibernate mode.  
Standby mode uses more power than Hibernate mode.  
!
If the battery runs down when the computer enters Standby mode, you will lose any unsaved data. Going back to the previous work state is impossible.  
To avoid loss of data, you should save your data frequently.  
If the computer is not used for 25 minutes, it will enter Standby mode. To avoid this, you can change the Standby mode  
settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
110  
Customizing Your VAIO Computer  
To change the Standby mode settings  
1
2
3
Click Start and then Control Panel.  
Click Performance and Maintenance.  
Click Power Options.  
The Power Options Properties window appears.  
4
5
Select the Power Schemes tab.  
Change the System Standby settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
111  
Customizing Your VAIO Computer  
Using Hibernate Mode  
In Hibernate mode, the state of the system is saved on the hard disk and power is turned off. Even when the battery runs  
down, no data will be lost. The power indicator light is off in this mode.  
To activate Hibernate mode  
Press the Fn+F12 keys.  
The Hibernating screen appears and the computer enters Hibernate mode.  
Alternatively,  
1
2
Click Start and then Turn Off Computer.  
Click Hibernate.  
To return to Normal mode  
Turn on the computer by pressing the power button.  
The computer returns to its previous state.  
!
If you press the power button for more than four seconds, the computer will turn off automatically.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
112  
Customizing Your VAIO Computer  
If you do not use the computer for a long period of time, put the computer into Hibernate mode. This power saving mode saves you the time of shutting  
down or resuming.  
When the computer is in Hibernate mode, you cannot insert a disc.  
Hibernate mode requires more time than Standby mode to be activated.  
It takes more time to return to Normal mode from Hibernate mode than from Standby mode.  
Hibernate mode uses less power than Standby mode.  
!
Do not move the computer until its power indicator light turns off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
113  
Customizing Your VAIO Computer  
Managing Power with VAIO Power Management  
Power management helps you set up power schemes for running on AC power or batteries to suit your requirements for  
power consumption.  
VAIO Power Management is a software application developed exclusively for VAIO computers. With this software  
application, you can enhance the Windows power management functions to ensure better operations of your computer and  
longer battery life. For more information on VAIO Power Management, see the help file on the VAIO Power Management  
software.  
Activating VAIO Power Management  
When you start the computer, a power status icon appears on the taskbar. This icon indicates what kind of power source you  
are using at that time, for example, AC power. If you double-click this icon, the window appears showing your power status.  
VAIO Power Management functionalities are added to the Windows Power Options Properties.  
To activate VAIO Power Management  
1
2
3
Click Start and then Control Panel.  
Click Performance and Maintenance.  
Click Power Options.  
The Power Options Properties window appears.  
4
Select the VAIO Power Management tab.  
To restore the default settings  
1
On the VAIO Power Management tab, click Advanced.  
The VAIO Power Management window appears.  
2
Follow the on-screen instructions to change the settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
114  
Customizing Your VAIO Computer  
Activating VAIO Power Management Power Schemes  
VAIO Power Management provides several predefined power schemes. Each power scheme consists of a group of power  
management settings that are designed to meet specific power management goals, ranging from maximum power  
management to no power management.  
To activate a VAIO Power Management power scheme  
1
2
3
Click Start and then Control Panel.  
Click Performance and Maintenance.  
Click Power Options.  
The Power Options Properties window appears.  
4
5
6
7
8
Select the tab for power scheme settings.  
Select a power scheme from the drop-down list.  
If you now select the VAIO Power Management tab, you see that the selected power scheme appears on the tab.  
If necessary, you can change the items in the list, for example, the LCD brightness of your computer screen.  
Click OK.  
The power scheme has been activated.  
You must have administrator rights on the computer to set up a power scheme.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
115  
Upgrading Your VAIO Computer  
Upgrading Your VAIO Computer  
Your computer and memory modules use high precision components and electronic connectors technology. To avoid the  
invalidation of your guarantee due to mishandling, we recommend that:  
You contact your dealer to install a new memory module.  
You do not install it yourself, if you are not familiar with upgrading memory on a computer.  
You do not touch the connectors or open the memory panel.  
For the type of module and amount of memory installed on your model, refer to the online Specifications.  
For assistance, contact an authorized Sony Service Center. To find the nearest center or agent, visit the Sony online support  
Web site.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
116  
Upgrading Your VAIO Computer  
Adding and Removing Memory  
If you want to expand the functionality of your computer, you can increase the memory by installing optional memory modules.  
Before you upgrade your computer's memory, read the notes and procedures in the following pages. The number of available  
slots depends on the configuration of your model.  
Notes on adding/removing memory modules  
Be careful when changing memory. Improper installation of memory modules may cause damage to your system. This  
damage may void your manufacturer's warranty.  
Only use memory modules that are compatible with the computer. If a memory module is not detected by the computer  
or Windows becomes unstable, contact your sales dealer or the manufacturer of your memory module.  
Electrostatic discharge can damage electronic components. Before touching a memory module, ensure the following:  
The procedures described in this document assume familiarity with the general terminology associated with personal  
computers and with the safety practices and regulatory compliance required for using and modifying electronic  
equipment.  
Turn off the computer and disconnect the system from its power source (that is, battery or AC adapter) and from any  
telecommunication links, networks, or modems before you open the computer. Failure to do so may result in personal  
injury or equipment damage.  
Electrostatic Discharge (ESD) can damage memory modules and other components. Install the memory module only  
at an ESD workstation. If such a station is not available, do not work in a carpeted area, and do not handle materials  
that produce or hold static electricity (cellophane wrappers, for example). Ground yourself by maintaining contact with  
an unpainted metal portion of the chassis while performing the procedure.  
Do not open the memory module package until you are ready to change the module. The package protects the module  
from ESD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
117  
Upgrading Your VAIO Computer  
Use the special bag delivered with the memory module or wrap the module in aluminum foil to protect it from electrostatic  
discharge.  
Introducing any liquids or any foreign substances or objects into the memory slots, or other internal components of the  
computer, will result in damage to the computer and any repair costs will not be covered by the warranty.  
Do not place the memory module in places subject to:  
Heat sources such as radiators or air ducts  
Direct sunlight  
Excessive dust  
Mechanical vibration or shock  
Strong magnets or speakers that are not magnetically shielded  
Ambient temperature of more than 95°F (35°C) or less than 41°F (5°C)  
High humidity  
Handle the memory module with care. To avoid injuries to your hands and fingers, do not touch the edges of the  
components and circuit boards inside the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
118  
Upgrading Your VAIO Computer  
Removing and Installing a Memory Module  
To change or add a memory module  
1
2
3
4
Shut down the computer and disconnect all peripheral devices.  
Unplug the computer and remove the battery pack.  
Wait until the computer cools down.  
Unscrew the screws (indicated by the arrows below) on the bottom of the computer and remove the memory module  
compartment cover.  
5
Touch a metal object (such as the connector panel on the back of the computer) to discharge static electricity.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
119  
Upgrading Your VAIO Computer  
6
Remove the memory module:  
Pull the latches in the direction of the arrows (1).  
The memory module is released.  
Make sure that the memory module tilts up and then pull it out in the direction of the arrow (2).  
7
Remove the new memory module from its packaging.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
120  
Upgrading Your VAIO Computer  
8
Slide the memory module into the memory module slot and push it in until it clicks into place.  
!
If you use only one memory module, make sure to insert it to the slot that is closer to the back of your computer.  
Do not touch any other components on the motherboard.  
9
Replace the memory module compartment cover.  
10 Tighten the screws on the bottom of the computer.  
11 Reinstall the battery and turn on the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
121  
Upgrading Your VAIO Computer  
Viewing the Amount of Memory  
To view the amount of memory  
1
2
3
4
5
Turn on the computer.  
Click Start, point to All Programs, and click VAIO Central.  
Click the System Information tab in the VAIO Central window.  
Double-click the System Information folder.  
Double-click the System Information icon.  
You can view the amount of system memory. If the additional memory does not appear, repeat the whole procedure and  
restart the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
122  
Precautions  
Precautions  
This section describes safety guidelines and precautions to help you protect your computer from potential damage.  
On Handling the LCD Screen (page 123)  
On Using the Power Source (page 124)  
On Handling Your Computer (page 125)  
On Using the Built-in MOTION EYE Camera (page 127)  
On Handling Floppy Disks (page 127)  
On Handling Discs (page 128)  
On Using the Battery Pack (page 129)  
On Using Headphones (page 130)  
On Handling Memory Stick Media (page 130)  
On Handling the Hard Disk (page 131)  
On Handling the Memory Card Adapter (page 132)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
123  
Precautions  
On Handling the LCD Screen  
Do not leave the LCD screen facing the sun. This could damage the LCD screen. Be careful when using the computer  
near a window.  
Do not scratch the LCD screen or exert pressure on it. This could cause a malfunction.  
Using the computer in low temperature conditions may produce a residual image on the LCD screen. This is not a  
malfunction. When the computer returns to normal temperature, the screen returns to normal.  
A residual image may appear on the LCD screen if the same image is displayed for a lengthy period of time. The residual  
image disappears in a while. You can use a screen saver to prevent residual images.  
The LCD screen becomes warm during operation. This is normal and does not indicate a malfunction.  
The LCD screen is manufactured using high-precision technology. You may, however, see tiny black points and/or bright  
points (red, blue, or green) that continuously appear on the LCD screen. This is a normal result of the manufacturing  
process and does not indicate a malfunction.  
Avoid rubbing the LCD screen. This could damage the screen. Use a soft, dry cloth to wipe the LCD screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
124  
Precautions  
On Using the Power Source  
See the online Specifications to check the power operation of your model.  
Do not share the AC outlet with other power-consuming equipment, such as a photocopier or shredder.  
You can purchase a power strip with a surge protector. This device prevents damage to the computer caused by sudden  
power surges, in an electrical storm, for example.  
Do not place heavy objects on the power cord.  
To disconnect the cord, pull it out by the plug. Never pull the cord itself.  
Unplug the computer from the AC outlet if you are planning to not use the computer for a long time.  
Make sure that the AC outlet is easily accessible.  
When the AC adapter is not used, unplug it from the AC outlet.  
Use the AC adapter supplied with the computer or genuine Sony products. Do not use any other AC adapter as it may  
cause a malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
125  
Precautions  
On Handling Your Computer  
Clean the cabinet with a soft cloth, which is dry or lightly moistened with a mild detergent solution. Do not use any type  
of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of the computer.  
If you drop a solid object or any liquid onto the computer, shut down the computer and then unplug it. You may want to  
have the computer checked by qualified personnel before operating it again.  
Do not drop the computer or place heavy objects on top of the computer.  
Do not place the computer in a location subject to:  
Heat sources, such as radiators or air ducts  
Direct sunlight  
Excessive dust  
Moisture or rain  
Mechanical vibration or shock  
Strong magnets or speakers that are not magnetically shielded  
Ambient temperature of more than 95°F (35°C) or less than 41°F (5°C)  
High humidity  
Do not place electronic equipment near the computer. The electromagnetic field of the computer may cause a  
malfunction.  
Provide adequate air circulation to prevent internal heat from building up. Do not place the computer on porous surfaces  
such as rugs or blankets, or near material such as curtains or draperies that may block its ventilation slots.  
The computer uses high-frequency radio signals and may cause interference to radio or TV reception. If this occurs,  
relocate the computer a suitable distance away from the set.  
Use only specified peripheral equipment and interface cables; otherwise, problems may occur.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
126  
Precautions  
Do not use cut or damaged connection cables.  
If the computer is brought directly from a cold location to a warm one, moisture may condense inside the computer. In this  
case, allow at least one hour before turning on the computer. If any problems occur, unplug the computer and contact an  
authorized Sony Service Center. To find the nearest center or agent, visit the Sony online support Web site.  
Make sure you disconnect the power cord before cleaning the computer.  
To avoid losing data if the computer is damaged, back up your data regularly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
127  
Precautions  
On Using the Built-in MOTION EYE Camera  
Do not touch the front mirror plate over the lens of the built-in MOTION EYE camera, as it may make scratches on the  
plate and such scratches will appear on the captured images.  
Do not let the direct sunlight get into the scope of the built-in MOTION EYE camera regardless of the computer's power  
state, as it may cause a malfunction of the camera.  
The built-in MOTION EYE camera is disabled while videos or still images are imported from an i.LINK-compatible device  
connected to the S400 (i.LINK) connector.  
Clean the front mirror plate over the lens of the built-in MOTION EYE camera with a blower brush or a soft brush. If the  
lens is extremely dirty, wipe it off with a soft dry cloth. Do not rub the plate, as it is force-sensitive.  
On Handling Floppy Disks  
Do not open the shutter manually or touch the surface of the floppy disk.  
Keep floppy disks away from magnets.  
Keep floppy disks away from direct sunlight and other sources of heat.  
Keep the floppy disk away from any liquid. Do not let the floppy disk get wet. When you are not using the floppy disk,  
always remove it from the floppy disk drive and use a storage case.  
If the floppy disk comes with an adhesive label, make sure that the label is properly affixed. If the edge of the label is  
curled up, the label may stick to the inside of the floppy disk drive and cause a malfunction or damage your floppy disk.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
128  
Precautions  
On Handling Discs  
Do not touch the surface of the disc.  
Do not drop or bend the disc.  
Fingerprints and dust on the surface of a disc may cause read errors. Always hold the disc by its edges and central hole,  
as shown below:  
Proper care of the disc is essential to its continuous reliability. Do not use solvents (such as benzine, thinner, alcohol,  
commercially available cleaners, or anti-static spray) which may cause damage to the disc.  
For normal cleaning, hold the disc by its edge and use a soft cloth to wipe the surface from the center out.  
If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to wipe the surface of the disc from  
the center out. Wipe off any remaining moisture with a dry soft cloth.  
Never affix an adhesive label on discs. This will affect the use of the disc irreparably.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
129  
Precautions  
On Using the Battery Pack  
Do not leave the battery pack in temperatures above 140°F (60°C), such as in a car parked in the sun or under direct  
sunlight.  
Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures.  
Charge the batteries at temperatures between 18°F to 86°F (10°C to 30°C). Lower temperatures require a longer charging  
time.  
This computer is designed to operate only with genuine Sony batteries.  
While the battery is in use or being charged, the battery pack heats up. This is normal and is not cause for concern.  
Keep the battery pack away from all sources of heat.  
Keep the battery pack dry.  
Do not open or try to disassemble the battery pack.  
Do not expose the battery pack to any mechanical shock.  
If you are not using the computer for an extended period of time, remove the battery pack from the computer to prevent  
damage to the battery.  
If, after fully charging the battery pack, the battery power is still low, the battery pack may be reaching the end of its life  
and should be replaced.  
You do not need to discharge the battery before recharging.  
If you have not used the battery pack for a considerable amount of time, recharge the battery.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
130  
Precautions  
On Using Headphones  
Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic  
hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at  
pedestrian crossings.  
Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud  
and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.  
On Handling Memory Stick Media  
Do not use the media in locations that are subject to static electricity or electrical noise.  
Do not touch the Memory Stick media connector with your finger or metallic objects.  
Use only the adhesive label supplied with the Memory Stick media as a label.  
Do not bend, drop, or apply strong shock to the Memory Stick media.  
Do not disassemble or modify Memory Stick media.  
Do not let Memory Stick media get wet.  
Do not use or store Memory Stick media in a location subject to:  
Extremely high temperatures, such as in a car parked in the sun  
Direct sunlight  
High humidity  
Corrosive substances  
Use the storage case supplied with the Memory Stick media.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
131  
Precautions  
On Handling the Hard Disk  
The hard disk has a high storage density and reads or writes data in a short time. However, it can be easily damaged by  
mechanical vibration, shock or dust.  
Although the hard disk has the internal safety device to prevent losing data due to mechanical vibration, shock or dust, you  
should be careful when handling the computer.  
To avoid damaging your hard disk  
Do not subject the computer to sudden movements.  
Keep the computer away from magnets.  
Do not place the computer in a location subject to mechanical vibration or in an unstable position.  
Do not move the computer while the power is on.  
Do not turn off the power or restart the computer while reading or writing data to disk.  
Do not use the computer in a place subject to extreme changes in temperature.  
If the hard disk is damaged, the data cannot be restored.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
132  
Precautions  
On Handling the Memory Card Adapter  
Do not touch the memory card adapter connector with your finger or metallic objects.  
Use only the adhesive label exclusively designed for the memory card adapter as a label.  
Do not bend, drop, or apply strong shock to the memory card adapter.  
Do not disassemble or modify the memory card adapter.  
Do not let the memory card adapter get wet.  
Do not use or store the memory card adapter in a location subject to:  
Extremely high temperatures, such as in a car parked in the sun  
Direct sunlight  
High humidity  
Corrosive substances  
Use the storage case supplied with the memory card adapter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
133  
Troubleshooting  
Troubleshooting  
This section describes how to solve common problems you might encounter when using your computer. Many problems have  
simple solutions. Try these suggestions before visiting the Sony online support Web site at http://esupport.sony.com/EN/VAIO/  
for customers in USA, at http://www.sony.ca/support for customers in Canada, or at http://esupport.sony.com/ES/ for  
customers in Latin American countries or areas.  
Computer (page 135)  
System Security (page 143)  
Battery (page 145)  
Built-in MOTION EYE Camera (page 147)  
Internet (page 150)  
Networking (page 152)  
Bluetooth Technology (page 155)  
CDs and DVDs (page 159)  
Display (page 164)  
Printing (page 168)  
Microphone (page 169)  
Mouse (page 170)  
Speakers (page 171)  
Touch Pad (page 172)  
Keyboard (page 173)  
Floppy Disks (page 174)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
134  
Troubleshooting  
PC Cards (page 175)  
Audio/Video (page 176)  
Memory Stick Media (page 177)  
Peripherals (page 178)  
Multi Function Bay Docking Station (page 179)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
135  
Troubleshooting  
Computer  
What should I do if my computer does not start?  
Make sure your computer is securely plugged into a power source and turned on. Make sure the power indicator shows  
the power is on.  
Make sure the battery is installed properly and charged.  
Make sure the floppy disk drive (if applicable) is empty.  
If your computer is plugged into a power strip or uninterruptible power supply (UPS), make sure the power strip or UPS  
is plugged into a power source and turned on.  
If you are using an external display, make sure it is plugged into a power source and turned on. Make sure the brightness  
and contrast controls are adjusted correctly. See the manual that came with your display for more information.  
Disconnect the AC adapter and remove the battery. Wait three to five minutes. Reattach the AC adapter and reinstall the  
battery, and press the power button to turn on your computer.  
Condensation may cause your computer to malfunction. If this occurs, do not use the computer for at least one hour.  
Remove any extra memory modules you may have inserted since purchase.  
Check that you are using the supplied Sony AC adapter. For your safety, use only genuine Sony rechargeable battery  
packs and AC adapters, which are supplied by Sony for your VAIO computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
136  
Troubleshooting  
What should I do if a BIOS error appears when I turn on my computer?  
If the message "Press <F1> to resume, <F2> to setup" appears at the bottom of your computer screen, follow these steps:  
1
Press the F2 key.  
The BIOS setup screen appears.  
2
3
4
Set the date (month/day/year). Press the Enter key.  
Press the m key to select System Time, and then set the time (hour: minute: second). Press the Enter key.  
Press the , key to select the Exit tab, and then press the F9 key.  
The message Load default configuration now? appears.  
5
6
Select Yes, and press the Enter key.  
Select Exit (Save Changes) or Exit Setup, and press the Enter key.  
The message Save configuration changes and exit now? appears.  
7
Select Yes, and press the Enter key.  
Your computer restarts.  
If this occurs frequently, contact an authorized Sony Service Center. To find the nearest center or agent, visit the Sony online  
support Web site.  
What should I do if the power indicator (Green) lights but my computer screen stays  
blank?  
Follow these steps:  
1
2
Press the power button for more than four seconds to check that the power indicator goes out. Then turn on your computer  
again.  
If your computer screen still stays blank, unplug the AC adapter, remove the battery, and leave the computer for about a  
minute. Then plug in the AC adapter, install the battery, and turn on the computer again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
137  
Troubleshooting  
What should I do if my computer or software stops responding?  
It is best to turn off your computer using the Turn Off Computer option on the Microsoft Windows Start menu, located  
on the taskbar. Using other methods, including those listed below, may result in loss of unsaved data.  
Click Start, point to Turn Off Computer, and then click Turn Off.  
If your computer does not turn off, press the Ctrl+Alt+Delete keys simultaneously. When the Windows Task Manager  
window appears, click Turn Off from the Shut Down menu.  
When the Windows Security window appears, click Shut Down.  
If your computer still does not turn off, press and hold the power button or slide and hold the power switch until the  
computer turns off.  
If your computer stops responding while playing a CD or DVD, press the Ctrl+Alt+Delete keys simultaneously. You can  
turn off the computer from Windows Task Manager.  
!
Pressing the Ctrl+Alt+Delete keys simultaneously or turning off your computer with the power button or switch may cause loss of data.  
Remove the AC adapter and battery.  
Try reinstalling the software.  
Contact the software publisher or designated provider for technical support.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
138  
Troubleshooting  
Why doesn't my computer enter Standby or Hibernate mode?  
Your computer may become unstable if the operating mode is changed before the computer completely enters Standby or  
Hibernate.  
To restore your computer to normal operating stability  
1
2
3
Close all open programs.  
Click Start, Turn Off Computer, and then Restart.  
If your computer does not restart, press the Ctrl+Alt+Delete keys simultaneously.  
In the Windows Task Manager window, select Restart from the Shut Down menu to restart the computer.  
4
If this procedure does not work, press and hold the power button or slide and hold the power switch until the computer  
turns off.  
What should I do if the battery indicator is flashing and my computer does not start?  
This symptom could be due to the battery pack not being installed properly. To resolve this symptom, turn off your  
computer and remove the battery pack. Then install the battery pack to the computer again. For details, see Installing  
the Battery Pack (page 22).  
If the symptom persists after performing the above, it means the installed battery pack is not compatible. Remove the  
battery pack and contact an authorized Sony Service Center. To find the nearest center or agent, visit the Sony online  
support Web site.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
139  
Troubleshooting  
What should I do if a message window, notifying of incompatibility or improper installation  
of the battery pack, appears and my computer enters Hibernate mode?  
This symptom could be due to the battery pack not being installed properly. To resolve this symptom, turn off your  
computer and remove the battery pack. Then install the battery pack to the computer again. For details, see Installing  
the Battery Pack (page 22).  
If the symptom persists after performing the above, it means the installed battery pack is not compatible. Remove the  
battery pack and contact an authorized Sony Service Center. To find the nearest center or agent, visit the Sony online  
support Web site.  
Why is the sound of my computer's fan so loud?  
Your computer's fan may be running at a high speed to cool the CPU. By lowering the CPU speed, you also lower the speed  
and noise level of the computer's fan. You can use the power schemes to lower the CPU speed.  
*
To lower the CPU speed using the power schemes  
1
2
Click Start and then Control Panel.  
Click Performance and Maintenance, and click Power Options.  
The Power Options Properties window appears.  
3
4
5
*
Select Portable/Laptop in the Power schemes box.  
Click Apply.  
Click OK.  
Available on selected models only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
140  
Troubleshooting  
Why does the System Properties window display a slower CPU speed than the  
maximum?  
This is normal. Because your computer's CPU utilizes a type of CPU speed controlling technology for power conservation  
purposes, System Properties may display the CPU's current speed instead of the maximum speed.  
What should I do if Windows does not start, showing a message, when I start my  
computer?  
If you enter a wrong power-on password three times consecutively, the Enter Onetime Password message appears and  
Windows will not start. Press the power button for more than four seconds to check that the power indicator goes off. Wait  
for 10 or 15 seconds, then restart your computer and enter the correct password. When entering the password, check that  
the Num lock indicator and Caps lock indicator are off. If any are lit, press the Num Lk key or the Caps Lock key to turn off  
the indicator before entering the password.  
What should I do if my game software does not work or it keeps crashing?  
Check the web site of the game if there are any patches or updates to download.  
Make sure you have installed the latest video driver.  
On some VAIO models, the graphics memory is shared with the system. The optimal graphic performance in this case is  
not guaranteed.  
What should I do if I cannot remember the BIOS password?  
If you have forgotten the BIOS password, contact an authorized Sony Service Center to reset it. A reset fee will be charged.  
To find the nearest center or agent, visit the Sony online support Web site.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
141  
Troubleshooting  
Why does it take time before my computer starts?  
If Norton Internet Security's Personal Firewall is active, it may take some time before the desktop screen appears due to  
network security checkups.  
Why doesn't my computer screen turn off when the time selected for the automatic turn-  
off action has passed?  
The originally selected VAIO's screen saver disables the timer setting, which you can select using the Windows power  
options, for your computer screen to turn off.  
Change the originally selected VAIO's screen saver.  
What should I do if I cannot boot my computer from the USB floppy disk drive connected  
to the computer?  
To boot your computer from the USB floppy disk drive, you need to change the boot device.  
Turn on your computer and press the F11 key when the VAIO logo appears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
142  
Troubleshooting  
How can I change the volume of the startup sound?  
To change the startup sound volume  
1
Press the F2 key.  
The BIOS setup screen appears.  
2
3
4
5
Press the < or , key to select Advanced.  
Press the M or m key to select Speaker Volume and press the Enter key.  
Press the M or m key to select the speaker volume at startup and press the Enter key.  
Press the < or , key to select Exit, select Exit (Save Changes) or Exit Setup, and then press the Enter key.  
The message Save configuration changes and exit now? appears.  
6
Select Yes and press the Enter key.  
Your computer restarts and you will hear the startup sound at the specified volume level.  
You can also show/hide the VAIO animation logo at startup. On the screen that is displayed after step 2 above, select VAIO Animation Logo or Show  
VAIO Animation Logo and press the Enter key to proceed with the setting. Hiding the VAIO animation logo will also turn off the startup sound.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
143  
Troubleshooting  
System Security  
This section provides information about keeping your computer operating smoothly and protecting against potential threats  
to the computer's security.  
How can I protect my computer against security threats, such as viruses?  
The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against  
security threats, such as viruses, is to download and install the latest Windows updates regularly.  
You can get important Windows updates by doing one of the following:  
The Automatic Updates feature — This feature automatically searches for and delivers updates directly to your computer  
whenever it is connected to the Internet.  
The Windows Updates web site — This site enables you to download computer updates without turning on the Automatic  
Updates feature.  
!
Your computer must be connected to the Internet before you can receive updates.  
To use the Automatic Updates feature  
1
2
3
Connect to the Internet.  
Click the Automatic Updates icon on the taskbar.  
Follow the on-screen instructions to set up automatic or scheduled updates.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
144  
Troubleshooting  
To visit the Windows Updates web site  
1
2
Connect to the Internet.  
Type http://windowsupdate.microsoft.com/ in the address bar of your browser.  
The Microsoft Windows Update and Security Warning windows appear.  
3
4
In the Security Warning window, start installation and run Windows Update.  
In the Microsoft Windows Update window, select an installation type, and follow the on-screen instructions.  
How do I keep my antivirus software updated?  
You can keep the Norton Internet Security software program current with the latest updates from Symantec Corporation.  
To download and install the latest security update  
1
Double-click the Norton Internet Security icon on the taskbar. If you have not previously registered the antivirus  
software, a series of information wizards appears.  
1
2
Follow the on-screen instructions to complete each wizard.  
Double-click the Norton Internet Security icon again.  
The Norton Internet Security window appears.  
If you have previously registered this antivirus software, the Norton Internet Security window automatically appears.  
2
Follow the on-screen instructions to select and download updates.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
145  
Troubleshooting  
Battery  
How do I find the battery charging status?  
See Charging the Battery Pack (page 24).  
When is my computer using AC power?  
When your computer is directly connected to the AC adapter, it uses AC power, even if a battery is installed.  
When should I recharge the battery?  
When the battery level falls below 10 percent.  
When both the battery and power indicators blink.  
When you have not used the battery for a long time.  
When should I replace the battery?  
If the battery power is still low after charging it, the battery may be reaching the end of its life and should be replaced.  
Should I be concerned that the installed battery is warm?  
No, it is normal for the battery to be warm when it is powering your computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
146  
Troubleshooting  
Can my computer enter Hibernate mode while using battery power?  
Your computer can enter Hibernate mode while using battery power, but some software programs and peripheral devices  
prevent the system from entering Hibernate mode. If you are using a program that prevents the system from entering  
Hibernate mode, save your data frequently to avoid losing data. See Using Hibernate Mode (page 111) for information on  
how you can manually activate Hibernate mode.  
Why doesn't my computer enter Hibernate mode?  
You may first need to enable Hibernate mode. Follow these steps:  
1
2
3
Click Start and then Control Panel.  
Click Performance and Maintenance.  
Click Power Options.  
The Power Options Properties window appears.  
4
5
Select the Hibernate tab.  
Click to check the box next to Enable hibernation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
147  
Troubleshooting  
Built-in MOTION EYE Camera  
Why does the viewer window show no images or poor-quality images?  
The built-in MOTION EYE camera cannot be shared by more than one software application. If another software  
application is using the camera, exit the application before using the built-in MOTION EYE camera.  
The video memory of your computer may have become insufficient for displaying images from the built-in MOTION EYE  
camera. Lowering the resolution or reducing the colors of the LCD screen might help.  
The viewer window may show some noises, for example horizontal streaks, if you view a rapid-moving object. This is  
normal and does not indicate a malfunction.  
If the problem persists, restart your computer.  
Why are captured images poor in quality?  
The images captured under the fluorescent lamp may show reflection of the light.  
A dark portion in captured images may appear as a noise.  
If the front mirror plate over the lens is dirty, you cannot take a clear shot. Clean the lens. See On Using the Built-in  
MOTION EYE Camera (page 127).  
Why do captured images contain dropped frames and audio interruptions?  
The effect settings on your software application may have caused dropped frames. See the help file on your software  
application for more information.  
There may be more software applications running than your computer can handle. Exit the applications that you are not  
currently using.  
The power management function of your computer may have been activated. Check the CPU performance.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
148  
Troubleshooting  
Why does movie playback show dropped frames when my computer is running on the  
battery?  
The battery is running out of power. Connect your computer to an AC power source.  
Why do the images captured by the built-in MOTION EYE camera flicker?  
This problem occurs when you use the camera under fluorescent lights due to the mismatch between lighting output  
frequency and shutter speed.  
To reduce flicker noise, change the pointing direction of the camera or the screen brightness. In some software applications,  
you can set an appropriate value to Flickness, one of the camera properties, to eliminate flicker noise.  
Why is the video input from the built-in MOTION EYE camera suspended for a few  
seconds?  
The video input may be suspended for a few seconds if  
a shortcut key with the Fn key is used.  
the CPU load increases.  
This is normal and does not indicate a malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
149  
Troubleshooting  
Why can't I use the built-in MOTION EYE camera?  
The built-in MOTION EYE camera cannot be shared by more than one software application. If another software  
application is using the camera, exit the application before using the built-in MOTION EYE camera.  
If the problem persists, you must reinstall the driver software for the camera. Follow these steps:  
1
2
3
4
5
6
Click Start and then Control Panel.  
Click the Performance and Maintenance icon.  
Click the System icon.  
Click Device Manager on the Hardware tab.  
Double-click Imaging devices.  
Right-click Sony Visual Communication Camera VGP-VCC1 and click Update Driver.  
What should I do if my computer becomes unstable when it enters Standby or Hibernate  
mode while the built-in MOTION EYE camera is in use?  
Do not place your computer into Standby or Hibernate mode while you are using the built-in MOTION EYE camera.  
If your computer automatically enters Standby or Hibernate mode, change the respective power saving mode setting. For  
changing the setting, see Using the Power Saving Modes (page 108).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
150  
Troubleshooting  
Internet  
What should I do if my modem does not work?  
Make sure the telephone cable is securely plugged into the modem port on your computer and the wall jack.  
Make sure the telephone cable is working. Plug the cable into an ordinary telephone and listen for a dial tone.  
Make sure the telephone number the program is dialing is correct.  
Make sure the software you are using is compatible with your computer's modem. (All preinstalled Sony programs are  
compatible.)  
Make sure the modem is the only device connected to your phone line.  
Follow these steps to check the settings:  
1
2
3
4
5
Click Start and then Control Panel.  
Click Printers and Other Hardware.  
Click Phone and Modem Options.  
On the Modems tab, check that your modem is listed.  
On the Dialing Rules tab, check the location information is correct.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
151  
Troubleshooting  
Why is my modem connection slow?  
Your computer is equipped with a V.92/ V.90 compatible modem. Many factors may influence modem connection speed,  
including telephone line noise or compatibility with telephone equipment, such as fax machines or other modems. If you think  
your modem is not connecting properly to other PC-based modems, fax machines, or your Internet Service Provider (ISP),  
do any of the following:  
Ask your telephone company to verify your telephone line is free of any line noise.  
If your problem is fax-related, make sure there are no problems with the fax machine you are calling and that it is  
compatible with fax modems.  
If you are having a problem connecting with your ISP, make sure the ISP is not experiencing technical problems.  
If you have a second telephone line, try connecting the modem to that line.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
152  
Troubleshooting  
Networking  
What should I do if my computer cannot connect to a wireless LAN access point?  
Connection availability is affected by distance and obstructions. You may need to move your computer away from  
obstructions or closer to any access point you may be using.  
Make sure the WIRELESS or WIRELESS LAN switch is on and the WIRELESS LAN indicator is lit on your computer.  
Make sure power to the access point is on.  
Follow these steps to check the settings:  
1
2
3
4
5
6
7
Click Start and then Control Panel.  
Click Network and Internet Connections.  
Click Network Connections.  
Right-click Wireless Network Connection.  
Click Properties.  
Click the Wireless Networks tab.  
Click View Wireless Networks to see that your access point is selected.  
Make sure the encryption key is correct.  
What should I do if I cannot access the Internet?  
Check the access point settings. See the manual that came with your access point for more information.  
Make sure your computer and the access point are connected to one another.  
Move your computer away from obstructions or closer to any access point you may be using.  
Make sure your computer is properly configured for Internet access.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
153  
Troubleshooting  
Why is the data transfer speed slow?  
The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points. Other  
factors include device configurations, radio conditions, and software compatibility. To maximize the data transfer speed,  
move your computer away from obstructions or closer to any access point you may be using.  
If you are using a wireless LAN access point, the device may be temporarily overloaded depending on how many other  
devices are communicating via the access point.  
If your access point interferes with other access points, change the access point channel. See the manual that came with  
your access point for more information.  
How do I avoid data transfer interruptions?  
When your computer is connected to an access point, data transfer interruptions may occur when using large files or if  
the computer is in close proximity to microwaves and cordless telephones.  
Move your computer closer to the access point.  
Make sure the access point connection is intact.  
Change the access point channel. See the manual that came with your access point for more information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
154  
Troubleshooting  
What are channels?  
Wireless LAN communication occurs on divided frequency bands known as channels. Third-party wireless LAN access  
point channels may be preset to different channels from Sony devices.  
If you are using a wireless LAN access point, see connectivity information contained in the manual that came with your  
access point.  
Why does the network connection stop when I change the encryption key?  
Two computers with built-in wireless LAN may lose a peer-to-peer network connection if the encryption key is changed. You  
can either change the encryption key back to the original profile or re-enter the key on both computers so the key matches.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
155  
Troubleshooting  
Bluetooth Technology  
What should I do if other Bluetooth devices cannot discover my computer?  
Make sure both devices have the Bluetooth feature enabled.  
If the Bluetooth indicator is off, turn on the WIRELESS switch.  
You cannot use the Bluetooth functionality when your computer is in a power saving mode. Return to normal mode, then  
turn on the WIRELESS switch.  
Your computer and the device may be too far apart. Wireless Bluetooth technology works best when the devices are within  
33 feet (10 meters) of each other.  
Why can't my computer discover other Bluetooth devices?  
If the connected device is also connected to other devices, it may not appear in the Bluetooth utility software or you may not  
be able to communicate with the device.  
What should I do if I cannot find the Bluetooth device with which I want to communicate?  
Check that the Bluetooth functionality of the device with which you want to communicate is on. See the other device's  
manual for more information.  
If the device with which you want to communicate is already communicating with another Bluetooth device, it may not be  
found or it may not be able to communicate with your computer.  
To allow other Bluetooth devices to communicate with your computer, right-click the Bluetooth icon  
on the taskbar and  
select Options from the menu to open the Options window. Then, check if proper security modes are selected on the  
Security tab. For details on the security modes, see the help file on the Bluetooth utility software.  
For more information on the Bluetooth Device window, see Communicating with Another Bluetooth Device (page 70).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
156  
Troubleshooting  
What should I do if other Bluetooth devices cannot connect to my computer?  
Make sure the other device is authenticated.  
Your computer may not allow connections from other devices. To enable Bluetooth device connections, follow these steps:  
1
2
Right-click the Bluetooth icon  
on the taskbar.  
Select Options from the menu.  
The Options window appears.  
3
Check if Standard or Low is selected for the Bluetooth security level on the Security tab.  
If a custom Bluetooth security level is selected, click the Default level button.  
4
Click OK.  
The data transfer distance can be shorter than 33 feet (10 meters) depending on existing obstacles between the two  
devices, on radio wave quality, and on the operating system or the software in use. Try to move your computer or to place  
both devices closer.  
If the device with which you want to communicate is already communicating with another Bluetooth device, it may not be  
found or it may not be able to communicate with your computer.  
Check that the Bluetooth functionality of the device with which you want to communicate is on. See the other device's  
manual for more information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
157  
Troubleshooting  
Why is my Bluetooth connection slow?  
The data transfer speed depends on the obstacles and/or the distance between the two devices, on the radio wave quality,  
and on the operating system or the software in use. Try to move your computer or try to place the two devices closer.  
The 2.4 GHz radio frequency used by Bluetooth and wireless LAN devices is also used by other devices. Bluetooth  
devices incorporate technology that minimizes interference from other devices using the same wavelength, however,  
communication speed and connection range may be reduced. Interference from other devices may also stop  
communication altogether.  
Connection availability is affected by distance and obstructions. You may need to move your computer away from  
obstructions or closer to the device to which it is connected.  
Identify and remove obstacles between your computer and the device to which it is connected.  
Note that due to limitations of the Bluetooth standard, large files may occasionally be corrupted during continuous transfer  
due to electromagnetic interference from the environment.  
Why does the message requesting authentication appear?  
The target Bluetooth enabled device is requesting connection authentication. Mutual authentication is required to enable  
Bluetooth communications with this device.  
Why can't I connect to service supported by the target Bluetooth device?  
Connection is only possible for services also supported by the computer with the Bluetooth functionality. For more details,  
see the help file on the Bluetooth utility software.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
158  
Troubleshooting  
Can I use a device with Bluetooth technology on airplanes?  
With Bluetooth technology, your computer transmits a radio frequency of 2.4 GHz. Sensitive locations, such as hospitals and  
airplanes, may have restrictions on the use of Bluetooth devices, due to radio interference. Check with facility staff to see if  
use of the Bluetooth feature on the computer is permitted.  
Why can't I connect to a Bluetooth device by specifying its IP address on a Personal Area  
Network (PAN)?  
The Bluetooth utility software uses Dynamic Host Configuration Protocol (DHCP) to assign IP addresses to active wireless  
devices. If you specify a fixed IP address for the device to which you want to connect, the utility cannot assign a dynamic IP  
address to the device and fails. Do not specify IP addresses when using a PAN.  
Why can't I use the Bluetooth functionality when I log on to my computer as a limited user?  
The Bluetooth functionality may not be available to users with limited rights on your computer. Log on to the computer as a  
user with administrator rights.  
Why can't I connect to a Bluetooth device in Personal Area Network User mode?  
If the device to which you want to connect supports Bluetooth communication in Personal Area Network User mode only, you  
cannot establish a connection from your computer.  
Why can't I use the Bluetooth utility software when I switch a user?  
If you switch a user without logging off from your system, the Bluetooth utility software will not work successfully. Make sure  
to log off before switching a user. To log off from your system, click Start and then Log Off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
159  
Troubleshooting  
CDs and DVDs  
Why does my computer freeze when I try to read a disc?  
The disc that your computer is trying to read may be dirty or damaged. Follow these steps:  
1
2
3
Restart the computer by clicking Start, Turn Off Computer, and Restart.  
Eject the disc from the optical disc drive.  
Examine the disc for dirt or damage. If the disc is dirty, see On Handling Discs (page 128) for instructions on how to  
clean it.  
What should I do if the drive tray does not open?  
Make sure your computer is on.  
Press the drive eject button.  
If the drive eject button does not work, click Start and then My Computer. Right click the optical disc drive icon, and select  
Eject from the shortcut menu.  
If none of the above options work, insert a thin, straight object (such as a paper clip) in the manual eject hole near the  
drive eject button.  
Try restarting your computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
160  
Troubleshooting  
What should I do if I cannot play a CD or DVD properly on my computer?  
Make sure the disc was inserted into the optical disc drive with the label facing up.  
Make sure the necessary program(s) is installed according to the manufacturer's instructions.  
If the CD or DVD is dirty or damaged, your computer will stop responding. Follow these steps:  
1
Restart the computer by pressing the Ctrl+Alt+Delete keys, and selecting Restart from the Shut Down menu of the  
Windows Task Manager window.  
2
3
Remove the CD or DVD from the optical disc drive.  
Check the disc for dirt or damage. If you need to clean the disc, see On Handling Discs (page 128) for instructions.  
If you are playing a CD or DVD and cannot hear sound, do any of the following:  
Double-click the Volume icon on the taskbar, and click to cancel the Master Volume Mute All and Wave Mute check  
boxes.  
Check the volume setting in the audio mixer.  
If you are using external speakers, check the volume settings on the speakers and the connections between the  
speakers and your computer.  
Make sure the CD audio feature is enabled and the correct driver software is installed. Follow these steps:  
1
2
3
Click Start and then Control Panel.  
Click Performance and Maintenance.  
Click System.  
The System Properties window appears.  
4
Select the Hardware tab, and click Device Manager in the Device Manager box.  
A window with a listing of your computer's hardware devices appears.  
If an "X" or an exclamation point appears on the listed device, you may need to enable the device or reinstall the  
drivers.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
161  
Troubleshooting  
5
6
7
Double-click the optical disc drive device to open the submenu.  
Double-click the listed drive, and select the Properties tab.  
Click to select the Enable digital CD audio for this CD-ROM device check box, if it is not selected.  
You can confirm the driver software by selecting the Driver tab, and clicking Driver Details.  
8
Click OK to close the window.  
Make sure an adhesive label is not affixed to the CD or DVD. Adhesive labels can come off while the disc is in the optical  
disc drive and damage the drive or cause it to malfunction.  
If a region code warning appears, the disc may be incompatible with the optical disc drive. Check the DVD package to  
make sure the region code is compatible with the optical disc drive.  
If you notice condensation on your computer, do not use the computer for at least one hour. Condensation can cause the  
computer to malfunction.  
Make sure your computer is running on AC power supply and try the disc again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
162  
Troubleshooting  
What should I do if I cannot write data to CD media?  
Do not launch any software application or allow any to launch automatically, not even a screen saver.  
Do not use the keyboard.  
Do not use a CD-R/RW disc that has an adhesive label affixed to it. This could cause a write error or other damage.  
What should I do if I cannot write data to DVD media?  
This Q & A entry applies to selected models only. See the online Specifications to see whether your model is equipped with  
an optical disc drive capable of DVD writing.  
Make sure you are using the correct DVD recordable media.  
Check which DVD recordable format is compatible with your computer's built-in DVD recorder. Note the possibility that  
some brands of DVD recordable media do not work.  
The preinstalled software on your computer does not support copying DVD movies. Macrovision or a similar video  
protection technology prevents users from copying DVD movies. Copying a DVD movie would be a copyright infringement  
and therefore illegal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
163  
Troubleshooting  
What should I do if I cannot write data to DVD-RAM media using Windows functions?  
This Q & A entry applies to selected models only. See the online Specifications to see whether your model is equipped with  
the DVD RW/RAM drive.  
Follow these steps to change the settings:  
1
2
3
4
5
Click Start and then My Computer.  
Right-click the optical disc drive icon and select Properties.  
Click the Recording tab.  
Click to cancel the Enable CD recording on this drive check box.  
Click OK.  
!
Canceling the Enable CD recording on this drive check box disables writing data to CD-R and CD-RW discs. To write data to such discs, make sure to  
select this check box.  
You cannot add data to DVD-RAM discs with data already written by the Roxio DigitalMedia software due to difference in disc formatting. Attempt to  
add data to such a disc will re-format the disc, resulting in loss of the entire written data.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
164  
Troubleshooting  
Display  
Why did my computer screen go blank?  
Your computer screen may go blank if the computer has lost power or has entered a power saving mode (Standby or  
Hibernate). If the computer is in LCD (Video) Standby mode, press any key to activate the computer screen. See Using  
the Power Saving Modes (page 108) for more information.  
Make sure your computer is securely plugged into a power source and turned on. Make sure the power indicator shows  
the power is on.  
If your computer is using battery power, make sure the battery is installed properly and is charged. See Using the Battery  
Pack (page 22) for more information.  
If the display mode is set to external display, press the Fn+F7 keys. See Combinations and Functions with the Fn Key  
(page 29) for more information.  
Why can't I view the whole screen image of a DVD video on my TV screen?  
The screen resolution may not be properly set. It is recommended that you adjust the screen resolution to 1024 x 768 or  
smaller, depending on the size of your external display screen.  
How do I adjust the image on my TV screen?  
Use the controls on your external display to adjust the image. See the manual that came with your TV for more information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
165  
Troubleshooting  
How do I change the screen resolution on my TV screen?  
Your TV screen may not show the whole screen image of a video if the screen resolution is set larger than 1024 x 768.  
Adjust the screen resolution to 1024 x 768 or smaller.  
If you are using the AV Out jack, plug the audio-video (AV) cable into your computer before you start it.  
To change the video resolution, follow these steps:  
1
2
3
Right-click the desktop, and select Properties from the shortcut menu.  
Select the Settings tab.  
Move the screen resolution slider to the left to reduce the size and to the right to increase the size of the screen  
resolution.  
How do I switch the display output from my computer screen to TV?  
Press the Fn+F7 keys to view the image either on your computer screen or on your TV. See Combinations and Functions  
with the Fn Key (page 29) for more information.  
Why doesn't my computer screen display a video?  
If the external display is selected for the display output with the Fn+F7 keys and the external display is disconnected, you  
cannot display a video on your computer screen. Stop video playback, press the Fn+F7 keys to change the display output to  
the computer screen, and then restart video playback.  
What should I do if my computer screen is dark?  
Press the Fn+F6 keys to brighten your computer screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
166  
Troubleshooting  
What should I do if the LCD brightness of your computer screen changes?  
The LCD brightness setting, adjusted with the Fn+F5/F6 keys, is temporary and this adjustment is overridden by the setting  
on the VAIO Power Management tab when another power scheme is selected.  
To save this preference for the brightness  
To do the following procedure, you must have administrator rights on your computer.  
1
2
3
4
5
6
7
Click Start and then Control Panel.  
Click Performance and Maintenance.  
Click Power Options.  
Select the tab for power scheme settings.  
Select the desired power scheme from the drop-down list.  
On the VAIO Power Management tab, select No change for LCD Brightness.  
Click OK.  
The preference for the LCD brightness adjusted with the Fn+F5/F6 keys is saved and the brightness of your computer screen  
remains unchanged regardless of operating conditions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
167  
Troubleshooting  
Why does my external display (or TV) stay blank when I change the display output?  
If you change the log-on user with the Fast User Switching function after Windows startup, you will not be able to select a  
display by pressing the Fn+F7 keys.  
What should I do if the Fn+F7 keys do not switch the display output to the external display  
connected to the monitor (VGA) port on my computer?  
When your computer is attached to the optional multi function bay docking station, the monitor (VGA) port on your computer  
is disabled. Thus, pressing the Fn+F7 keys toggles between the computer screen and the external display connected to the  
monitor (VGA) port on the docking station.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
168  
Troubleshooting  
Printing  
What should I do if I cannot print a document?  
Make sure your printer is on, and the printer cable is securely connected to the ports on the printer and computer.  
Make sure your printer is compatible with the Windows operating system installed on your computer.  
You may need to install the printer driver software before you use your printer. See the manual that came with your printer  
for more information.  
If your printer is not functioning after your computer resumes from a power saving mode (Standby or Hibernate), then  
restart the computer.  
If the bidirectional communication functions are provided with your printer, disabling the functions on your computer may  
enable printing. Follow these steps:  
1
2
3
4
5
6
7
Click Start and then Control Panel.  
Click Printers and Other Hardware.  
Click Printers and Faxes.  
Right-click the printer icon and select Properties.  
Click the Ports tab.  
Click to cancel the Enable bidirectional support check box.  
Click OK.  
This change to the settings disables the bidirectional communication functions of the printer, such as data transfer, status  
monitoring, and remote panel.  
When your printer is connected to the multi function bay docking station, check the multi function bay docking station to  
see if it is connected to an AC power source.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
169  
Troubleshooting  
Microphone  
What should I do if my microphone does not work?  
If you are using an external microphone, make sure the microphone is turned on and is properly plugged into the  
microphone jack on your computer.  
The muting button may have been pressed. Check to see if the muting % indicator light is on. If it is, press the muting  
button to turn on the volume.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
170  
Troubleshooting  
Mouse  
What should I do if my computer does not recognize my mouse?  
Make sure your mouse is securely plugged into the port.  
Restart your computer with your mouse connected.  
What should I do if the pointer does not move when I use my mouse?  
Make sure another mouse is not installed.  
If you are playing a disc, press the Ctrl+Alt+Delete keys simultaneously to stop playback and restart your computer.  
If you still cannot use the pointer, do any of the following:  
Press the Ctrl+Alt+Delete keys simultaneously.  
In the Windows Task Manager window, select Restart from the Shut Down menu to restart your computer.  
Press and hold the power button. When your computer turns off, wait 10 to 15 seconds then press the power button  
again to restart the computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
171  
Troubleshooting  
Speakers  
What should I do if my speakers do not work?  
Make sure your speakers are properly connected and the volume is turned up loud enough to hear sound.  
Make sure your speakers are designed for computer use.  
If your speakers have a muting button, set the button to off.  
The speaker volume may have been turned off. Press the muting button on your computer.  
If you have connected an audio cable to the headphones jack, disconnect the cable and use the speaker cable supplied  
with your speakers.  
If you are using battery power, make sure the battery is installed properly and is charged.  
If your speakers require external power, make sure the speakers are connected to a power source. See the manual that  
came with your speakers for more information.  
What should I do if I cannot hear sound from my speakers?  
If your computer is using battery power, make sure the battery is properly installed and is charged.  
If you are using a program that has its own volume control, make sure the volume control is properly set. See the  
program's help file for more information.  
Make sure the speaker volume is turned up loud enough and the audio option is enabled.  
The speaker volume may have been turned off. Press the muting button on your computer.  
Check the volume controls in Windows.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
172  
Troubleshooting  
Touch Pad  
What should I do if the touch pad does not work?  
Try restarting your computer.  
Press the Ctrl+Alt+Delete keys simultaneously.  
In the Windows Task Manager window, select Restart from the Shut Down menu to restart the computer.  
If the pointer does not move while playing a disc, press the Ctrl+Alt+Delete keys simultaneously to stop playback and  
restart your computer.  
If the problem persists, make sure a mouse is not installed.  
You may have disabled the touch pad without connecting a mouse to your computer. See Using the Touch Pad (page  
31).  
How do I change the left and right button assignments?  
If your computer is interpreting a single-click as a double-click, you may want to change the button assignments. Follow these  
steps:  
1
2
3
4
5
Click Start and then Control Panel.  
Click Printers and Other Hardware.  
Click Mouse.  
Click the Buttons tab.  
Select your preferences in the Button Selection box, and then click Apply to install your settings.  
You may need to press the Tab key and the M and m keys to make your selections.  
6
Click OK to close the window.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
173  
Troubleshooting  
Keyboard  
What should I do if the keyboard configuration is wrong?  
The language layout of your computer's keyboard is specified on the sticker on the box. If you choose a different regional  
keyboard when you complete the Windows setup, the key configuration will be mismatched.  
To change the keyboard configuration, follow these steps:  
1
2
3
Click Start and then Control Panel  
Click Date, Time, Language and Regional Options, and click Regional and Language Options.  
Change the settings as desired.  
What should I do if I cannot enter certain characters with the keyboard?  
If you cannot enter U, I, O, P, J, K, L, M, and so on, the Num Lk key may be activated. Check that the Num lock indicator is  
off. If the Num lock indicator is on, press the Num Lk key to turn it off before entering these characters.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
174  
Troubleshooting  
Floppy Disks  
Why doesn't the Safely Remove Hardware icon appear on the taskbar when the drive is  
connected?  
Your computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB  
port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does  
not appear, follow these steps:  
1
2
3
4
5
Close all programs that are accessing the floppy disk drive.  
Wait for the LED indicator on the floppy disk drive to turn off.  
Push the eject button to remove the disk, and disconnect the USB floppy disk drive from your computer.  
Reconnect the floppy disk drive by inserting the USB connector (with the USB icon facing upward) into the USB port.  
Restart the computer by clicking Start, Turn Off Computer, and then Restart.  
What should I do if I cannot write data to a floppy disk?  
Make sure the floppy disk is properly inserted in the drive.  
If the disk is inserted properly and you are still unable to write data to it, the disk may be full or write-protected. You can  
either use a floppy disk that is not write-protected or disable the write-protect feature.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
175  
Troubleshooting  
PC Cards  
What should I do if my PC Card does not work?  
Make sure the PC Card is inserted properly. See Inserting a PC Card (page 44) for more information.  
Make sure the PC Card is compatible with the Microsoft Windows operating system installed on your computer.  
See the manual that came with your PC Card for more information. You may need to install driver software if you are not  
using a Sony PC Card.  
Why doesn't my computer recognize attached devices?  
For some PC Cards, if you alternate between normal power operation and the Standby or Hibernate modes while the card is  
inserted into the PC Card slot, your computer may not recognize the PC Card or the connected device. Restart the computer.  
Why can't I insert my PC Card?  
Make sure you are inserting the card correctly. See Inserting a PC Card (page 44) for more information.  
You may not be able to use some PC Cards or some functions of the PC Card on your computer. See the manual that  
came with your PC Card for more information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
176  
Troubleshooting  
Audio/Video  
What should I do if I cannot use my DV camcorder?  
If the message that DV equipment seems to be disconnected or turned off appears, the i.LINK cable may not be securely  
plugged into the ports on your computer or camcorder. Unplug the connectors, and plug them in again. See Connecting an  
i.LINK Device (page 100) for more information.  
i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The i.LINK connection may vary, depending on  
the software applications, operating system, and compatible i.LINK devices. All products with an i.LINK connection may not communicate with each  
other. See the manual that came with your compatible i.LINK device for more information on operating conditions and proper connection. Before  
connecting compatible i.LINK PC peripherals to your system, such as a CD-RW or hard disk drive, confirm their operating system compatibility and  
required operating conditions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
177  
Troubleshooting  
Memory Stick Media  
What should I do if I cannot open my image files?  
You may need to reformat your Memory Stick media.  
Formatting Memory Stick media erases all data, including music data previously saved to it. Before you reformat Memory  
Stick media, back up important data and confirm that the media does not contain files you want to keep.  
1
2
Copy the data from the Memory Stick media onto your computer's hard disk to save data or images.  
Format the Memory Stick media using the Memory Stick Formatter software preinstalled on your computer. For  
instructions about formatting a Memory Stick media, see the help file on the Memory Stick Formatter software.  
Why can't I save music files onto my Memory Stick media?  
Copyright protected music cannot be checked out to any Memory Stick media other than MagicGate Memory Stick media.  
!
Using recorded music requires permission of the copyright holders.  
Sony is not responsible for music files that cannot be recorded from a CD or downloaded from other sources.  
Can I copy images from a digital camera using Memory Stick media?  
Yes, and you can view video clips that you have recorded with Memory Stick media-compatible digital cameras.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
178  
Troubleshooting  
Peripherals  
What should I do if I cannot connect a USB device?  
If applicable, check the USB device is turned on and using its own power supply. For example, if you are using a digital  
camera, check the battery is charged. If you are using a printer, check the power cable is connected properly to the AC  
outlet.  
Try using a different USB port on your computer. The driver could be installed to the specific port you used the first time  
you connected the device.  
See the manual that came with your USB device for more information. You may need to install software before you connect  
the device.  
Try connecting a simple, low-powered device such as a mouse to test if the port is working at all.  
USB hubs may prevent a device from working because of the distribution of power. We recommend you connect the  
device directly to your computer without a hub.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
179  
Troubleshooting  
Multi Function Bay Docking Station  
What should I do if I cannot use the devices connected to the multi function bay docking  
station?  
Make sure to use the AC adapter supplied with the multi function bay docking station to connect the docking station to a power  
source. The multi function bay docking station does not work on the battery installed in your computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
180  
Support Options  
Support Options  
The section contains information on where to go for answers to questions about your computer and the preinstalled software.  
Sony Support Information  
See the following sources for answers in the sequence listed below.  
1
2
3
4
VAIO Computer Documentation  
This on-screen User Guide (this manual) and the printed Welcome mat provide detailed information on how to maximize  
your computer's capabilities and solve common problems.  
Program Guides and Help Files  
The preinstalled programs on your computer may be supplied with individual help guides. These guides are stored on the  
hard disk as on-screen Help files. You can find the help files from the Help menu under the specific program.  
Operating System Online Support  
Your computer comes preinstalled with a Microsoft Windows operating system. For operating system support, you can  
visit Microsoft customer support at: http://support.microsoft.com/directory/.  
Sony Computing Support  
This service provides instant access to information on commonly encountered problems. Type a description of the  
problem and the Knowledge Database searches for the corresponding solutions online. You can visit the Sony online  
support Web site at http://esupport.sony.com/EN/VAIO/ for customers in USA, at http://www.sony.ca/support for  
customers in Canada, or at http://esupport.sony.com/ES/ for customers in Latin American countries or areas.  
5
VAIO Update  
When your computer is connected to the Internet, VAIO Update automatically notifies you when critical software and  
security information is posted on the support web site. Click the VAIO Update notice to open the VAIO Support web site  
and view the information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
181  
Support Options  
For users in Latin American countries or areas  
Customer Information Center  
If you do not find the information you are looking for at our site, you may call Sony directly. In order to receive the fastest and  
most efficient services, please have the following information readily available:  
1
2
Your VAIO computer model  
You can find it at the lower right corner of the display on the laptops, and in the same place on the front panel of the CPU  
on the desktops.  
Your computer's serial number  
You can find it on the back or bottom of the laptop or on the back of the desktop; the serial number is the last 7 digits of  
the number below the barcode.  
3
4
5
The operating system on your computer  
The hardware component or the software program that is causing you the problem  
A brief description of the problem  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
182  
Support Options  
In order to contact a Sony technical support representative, please call the following numbers:  
In Argentina:  
(011) 6770-SONY (7669)  
In Mexico:  
In Mexico City: 5002-9819  
In the Mexican Republic: 01-800-759-7669  
In Colombia:  
01-800-550-7000  
In Peru:  
0-801-1-7000 or 511-6100  
In Chile:  
Sony answers: 800-261-800  
From cellular phones: 02-754-6333  
In Venezuela:  
0-800-1-SONY-00 (0-800-1-7669-00)  
In Panama:  
800-2050  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
183  
Support Options  
Program Support Information  
Depending on the computer model and particular configuration you purchased, your computer may not include all of the  
software programs listed below.  
Contacts for Sony software products are listed below:  
For users in USA  
Telephone 888-4-SONY-PC (888-476-6972)  
For users in Canada  
Telephone 888-4-SONY-PC (888-476-6972)  
For users in Latin American countries or areas  
For contacts about third-party software products, see the following.  
Adobe® Photoshop® Elements, Premiere®, Reader®  
Adobe Systems Inc.  
For users in USA and Canada  
Telephone 800-685-3652  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
184  
Support Options  
America Online® (Dial-Up)  
America Online, Inc.  
For users in USA and Canada  
AOL® Music Now  
America Online, Inc.  
For users in USA and Canada  
AOL® Explorer  
America Online, Inc.  
For users in USA and Canada  
AOL® Toolbar  
America Online, Inc.  
For users in USA and Canada  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
185  
Support Options  
AOL® Instant Messenger™  
America Online, Inc.  
For users in USA and Canada  
Bluetooth® Utility  
TOSHIBA Corporation  
For contacts about the software, see Program Support Information (page 183).  
Cingular Connection Manager  
Cingular Wireless  
For users in USA and Canada  
Click to DVD® software  
Sony Electronics Inc.  
At the touch of a button, Click to DVD software allows you to automatically burn DVDs from a digital video (DV) device.  
Create DVDs by capturing video content straight from a DV device or by importing video from stored files — and you can  
also edit the video. Create DVD photo albums and slide shows with picture files or by importing pictures from a digital still  
camera. What's more, you can give a professional look to your DVDs by adding chapter menus, backgrounds, and menu  
screens. You are only a few clicks away from your own DVDs!  
For contacts about the software, see Program Support Information (page 183).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
186  
Support Options  
DISCoverMy Games™  
DISCover  
For users in USA and Canada  
DVgate Plussoftware  
Sony Electronics Inc.  
Connect a compatible digital video camera to your computer's i.LINK® port and capture video clips and still images. Edit  
clips from your video, add new clips, and combine clips into new movie segments. Save your movies back to your digital  
video camera or in a variety of popular file formats.  
For contacts about the software, see Program Support Information (page 183).  
Image Converter 2 Plus  
Sony Electronics Inc.  
Image Converter 2 Plus allows you to easily convert movie and picture files on your computer to your Memory Stick®  
media.  
For contacts about the software, see Program Support Information (page 183).  
Intel® PROSet  
Intel Corporation  
For users in USA and Canada  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
187  
Support Options  
Microsoft® Office Basic Edition, Office Professional Edition, Office Small Business Edition  
Microsoft Corp.  
For users in USA and Canada  
60-Day Trial Version of Microsoft® Office 2003  
!
The Microsoft Office 2003 60-Day Trial software included with this computer system is intended for evaluation purposes only. The software has been  
installed and you must activate the software before you can use it. Product activation procedures will be detailed during initial launch of the software;  
activation requires Internet access. This software has an expiration date of 60 days from date of first use, at which time the software will operate under  
reduced-functionality mode, limiting end-user options and operations.  
Microsoft Corp.  
For users in USA and Canada  
Microsoft® Internet Explorer, Movie Maker, Media Player, Works  
Microsoft Corp.  
For users in USA and Canada  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
188  
Support Options  
Netscape® Browser  
America Online, Inc.  
For users in USA and Canada  
Norton Internet Security™  
Symantec Corporation  
For users in USA and Canada  
Protector Suite QL  
Sony Electronics Inc.  
Protector Suite QL Edition allows you to easily setup your fingerprint sensor that comes with your computer. Protector  
Suite QL supports fingerprint logon, fast user switching, file encryption, registering forms and more.  
For contacts about the software, see Program Support Information (page 183).  
Quicken® New User Edition  
Intuit Inc.  
For users in USA and Canada  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
189  
Support Options  
ROXIO DigitalMedia®  
Sonic Solutions  
For users in USA and Canada  
SmartWiConnection Utility  
Sony Electronics Inc.  
SmartWi Connection Utility allows you to easily switch between the various wireless components (Wireless LAN, Wireless  
WAN, and Bluetooth technology connectivity) that came with your computer.  
For contacts about the software, see Program Support Information (page 183).  
SonicStage® software  
Sony Electronics Inc.  
The SonicStage jukebox software program gives you all the tools you need to manage music on your computer.  
SonicStage software supports high-quality digital audio storage, a sleek player skin design, and audio CD burning  
capability.  
For contacts about the software, see Program Support Information (page 183).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
190  
Support Options  
SonicStage Mastering Studiosoftware  
Sony Electronics Inc.  
Use SonicStage Mastering Studio software to record songs from analog records or cassette tapes into your computer  
and output them to CDs, DVDs, or audio files in WAV format.  
For contacts about the software, see Program Support Information (page 183).  
System Mechanic® 6  
iolo technologies®, LLC  
For users in USA and Canada  
Trend MicroAnti-Spyware  
Trend Micro, Inc.  
For users in USA and Canada  
Ulead BD DiscRecorder for VAIO® computers  
Ulead Systems, Inc.  
For questions and technical assistance, please check the help and the readme files.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
191  
Support Options  
VAIO® Action Setup  
Sony Electronics Inc.  
VAIO Action Setup manages the settings for your computer's shortcut keys.  
For contacts about the software, see Program Support Information (page 183).  
VAIO® Camera Utility  
Sony Electronics Inc.  
VAIO Camera Utility provides you with various video quality settings when using the internal camera.  
For contacts about the software, see Program Support Information (page 183).  
VAIO® Central  
Sony Electronics Inc.  
VAIO Central provides a central location that gathers resources to configure your VAIO computer and view your  
computer's configuration and specifications.  
For contacts about the software, see Program Support Information (page 183).  
VAIO® Edit Component  
Sony Electronics Inc.  
VAIO Edit Component provides enhanced editing functionality when using Adobe Premiere Pro, Adobe Premiere  
Standard, or Adobe Premiere Elements on your VAIO computer.  
For contacts about the software, see Program Support Information (page 183).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
192  
Support Options  
VAIO Mediasoftware  
Sony Electronics Inc.  
VAIO Mediasoftware brings multimedia to your network, enabling you to share music, video, and still image files  
between your VAIO® computers. You can set up one or more VAIO computers as "media servers," which store your  
multimedia files and make them available to other compatible VAIO computers on your wired or wireless network.  
For contacts about the software, see Program Support Information (page 183).  
VAIO® Security Center  
Sony Electronics Inc.  
Sony cares about your VAIO personal computer. The VAIO Security Center highlights some of the security features your  
machine includes.  
For contacts about the software, see Program Support Information (page 183).  
VAIO® Support Central  
Sony Electronics Inc.  
VAIO Support Central provides an easy to navigate solution to common support needs, such as VAIO Documentation,  
product specifications, serial number, model name, service tag information, survey, registration, etc.  
For contacts about the software, see Program Support Information (page 183).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
193  
Support Options  
VAIO® Update  
Sony Electronics Inc.  
The VAIO Update utility helps you keep your VAIO® computer up to date by regularly checking the Sony Online Support  
Web site for important software updates and information for your specific VAIO computer model.  
For contacts about the software, see Program Support Information (page 183).  
VAIO Zonesoftware  
Sony Electronics Inc.  
VAIO Zone software provides an effortless way to browse and enjoy pictures, music, and video files on your computer,  
all through an elegant, next-generation interface. You can even enjoy media content stored on other VAIO® computers  
on your network. On VAIO computer models with a recordable DVD drive, VAIO Zone enables you to record video and  
slide shows of pictures to DVD. On VAIO computer models with a built-in TV tuner, VAIO Zone includes a complete  
personal video recorder, enabling you to record TV programs and burn them to DVD.  
For contacts about the software, see Program Support Information (page 183).  
WinDVD® software for VAIO® computers  
InterVideo, Inc.  
For users in USA and Canada  
Telephone 510-651-0888  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
194  
Support Options  
Wireless Setup Utility  
Sony Electronics Inc.  
The Wireless Setup Utility walks you through setting up your wireless network connection and offers useful diagnostic  
tests to help keep your wireless network running smoothly.  
For contacts about the software, see Program Support Information (page 183).  
Xdrive™  
America Online, Inc.  
For users in USA and Canada  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
© 2006 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Sharp Calculator VX 792C User Manual
Sharp DVD VCR Combo 20F540 L User Manual
Sony Computer Monitor SDM S204E User Manual
Sony DVD Recorder DRU 710A User Manual
Sony Ericsson Cell Phone P908 User Manual
Sony Headphones MDR EX10LP User Manual
Sony Speaker FRF7ED User Manual
Sony TV Receiver XT U500V User Manual
Supersonic Tablet SC72JB User Manual
Sylvania VCR 6240VC1 User Manual