3-095-507-11(1)
Micro HI-FI
Component System
Operating Instructions
Owner’s Record
e model and serial numbers are located on the rear of the unit. Record these
numbers in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No. ______________ Serial No. ______________
CMT-BX5BT
© 2007 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
is equipment complies with FCC
radiation exposure limits set forth for
uncontrolled equipment and meets the
FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65.
is equipment has a very low RF energy
level that is deemed to comply with
FCC radio frequency (RF) Exposure
Guidelines in Supplement C to OET65
without maximum permissive exposure
evaluation (MPE). But it is desirable that
it should be installed and operated with at
least 20cm and more between the radiator
and person’s body (excluding extremities:
hands, wrists, feet and legs).
Note on DualDiscs
A DualDisc is a two sided disc product
which mates DVD recorded material on
one side with digital audio material on
the other side. However, since the audio
material side does not conform to the
Compact Disc (CD) standard, playback on
this product is not guaranteed.
Music discs encoded with copyright
protection technologies
is product is designed to playback
discs that conform to the Compact Disc
(CD) standard. Recently, various music
discs encoded with copyright protection
technologies are marketed by some record
companies. Please be aware that among
those discs, there are some that do not
conform to the CD standard and may not
be playable by this product.
e Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sony
Corporation is under license. Other
trademarks and trade names are those
of their respective owners.
MPEG Layer-3 audio coding
technology and patents licensed from
Fraunhofer IIS and omson.
ꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
ꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to parts and controls
is manual mainly explains operations using the remote, but the same operations can
also be performed using the buttons on the unit having the same or similar names.
Unit (HCD-BX5BT/Compact Disc Receiver)
Front panel
Top panel
Continued
ꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote (RM-SC31)
BLUETOOTH indicator (page 18,
19)
Lights up when the Bluetooth function
is active.
BLUETOOTH OPR button (page
16, 18, 19)
Press to make a connection,
disconnection, or pairing with a
Bluetooth device.
AUDIO IN jack (page 20)
Connect to an optional audio
component.
PHONES jack
Connect the headphones.
Playback buttons and function
buttons
Unit: BLUETOOTH (play/
pause) button (page 15, 16)
/ (power) button (page 11, 24,
27)
Press to turn on the system.
Press to select the Bluetooth function.
Press to start or pause playback of the
music on the Bluetooth device (Bluetooth
mobile phone, etc.).
STANDBY indicator (page 21, 25)
Lights up when the system is turned off.
Unit: CD (play/pause)
button (page 12)
Remote sensor (page 25)
Press to select the CD function.
Press to start or pause playback of a disc.
Remote: CD button (page 12)
Press to select the CD function.
(open/close) button (page 12)
Press to open or close the disc tray.
ꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote: (play) button,
(pause) button
ENTER button (page 11, 22, 23,
24)
Press to enter the settings.
Press to start or pause playback.
TUNER/BAND button (page 13)
Press to select the TUNER function.
Press to select FM or AM reception
mode.
/ (go back/go forward)
button (page 12, 15, 16, 22)
Press to select a track or file.
Remote: AUDIO IN button (page
20)
Press to select the AUDIO IN function.
Unit: TUNE +/ (tuning) button
(page 13)
Remote: +/ (tuning) button
(page 13, 23)
Press to tune in the desired station.
FUNCTION button (page 18, 19)
Press to select the function.
+/ (select folder) button
(page 12, 15, 22)
Press to select a folder.
DISPLAY button (page 16, 21)
Press to change the information on the
display.
/ (rewind/fast forward)
button (page 12, 15, 16)
PLAY MODE/TUNING MODE
button (page 12, 13, 22, 23)
Press to select the play mode of a CD or
MP3 disc.
Press to select the tuning mode.
Press to find a point in a track or file.
Unit: VOL +/ button (page 12,
13, 16, 19, 20)
Remote: VOLUME +/ button
(page 12, 13, 16, 19, 20)
Press to adjust the volume.
Sound buttons (page 20)
Unit: DSGX button
Remote: EQ button
Press to select the sound effect.
CLOCK/TIMER SELECT button
(page 24)
CLOCK/TIMER SET button (page
11, 24)
Press to set the clock and the Play Timer.
Unit: /CANCEL (stop/cancel)
button (page 12, 13, 15, 16, 18)
Remote: (stop) button (page
12, 13, 15, 16, 18)
Press to stop playback.
Continued
ꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT/FM MODE button (page
12, 13)
Press to listen to a disc, a single track or
file repeatedly.
Press to select the FM reception mode
(monaural or stereo).
Battery compartment lid
(page 11)
CLEAR button (page 16, 18, 22)
Press to delete a pre-programmed track
or file.
Press to erase the pairing registration
information of the Bluetooth device.
TUNER MEMORY button (page
23)
Press to preset the radio station.
SLEEP button (page 24)
Press to set the Sleep Timer.
ꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Information on the display
Function
Timer (page 24)
Audio format
Play mode (page 12)
DSGX (page 20)
Tuner reception mode (page 13)
Tuner reception (page 13)
Play/Pause
Text information
ꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Hooking up the system securely
Left speaker
Right speaker
or
Wall socket
Speaker cord (Red/)
Speakers
Speaker cord (Black/)
Insert only the stripped portion of the
speaker cords into the SPEAKER jacks.
AM loop antenna
FM lead antenna (Extend it horizontally.)
Brown side for other regions
White side for North American model
Antennas
Find a location and an orientation that
provide good reception, and then set up
the antenna.
Keep the antennas away from the speaker
cords and the power cord to avoid
picking up noise.
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Power
Setting the clock
Use buttons on the remote to set the
clock.
Connect the power cord to a wall socket.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
When carrying this system
1
2
Press /
system.
to turn on the
1
2
3
Remove a disc to protect the CD
mechanism.
.
Press CLOCK/TIMER SET
Press CD
function.
to select the CD
If the current mode appears on
the display, press /
Hold down TUNER/BAND
and
repeatedly to select “CLOCK SET”
.
and then press ENTER
DSGX
on the unit, and press
on the unit until “STANDBY”appears.
3
4
Press /
to set the hour, and then press
repeatedly
4
After “LOCK”appears, unplug the
power cord.
ENTER
.
To use the remote
Use the same procedure to set
the minutes.
e clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
Slide and remove the battery
compartment lid , and insert the two
supplied R6 (size AA) batteries, side
first, matching the polarities shown
below.
To display the clock when the system
is off
Press DISPLAY . e clock is displayed
for about 8 seconds.
Notes
With normal use, the batteries should last for
about six months.
Do not mix an old battery with a new one or
mix different types of batteries.
If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operation
Basic Operations
To
Press
Pause playback (or CD on the
unit) . To resume
Playing a CD/MP3 disc
play, press the button
again.
1
Select the CD function.
.
Stop playback
Press CD
.
Select a folder
on an MP3
disc
Select a track /
or file
+/
.
2
Place a disc.
Press
on the unit, and place
a disc with the label side up on the
disc tray.
.
Find a point in Hold down /
a track or file
during playback, and
release the button at the
desired point.
Select Repeat REPEAT
repeatedly
Play
until “REP” or “REP1”
appears.
To close the disc tray, press
the unit again.
on
To change the play mode
Do not force the disc tray closed with
your finger, as this may damage the
unit.
Press PLAY MODE
repeatedly while
the player is stopped. You can select
normal play (“ *” for all MP3 files
in the folder on the disc), shuffle play
3
4
Start playback.
(“SHUF” or “
play (“PGM”).
(SHUF)
Play performs the same operation as normal
(shuffle) play.
SHUF*”), or program
Press (or CD on the unit)
.
*
When playing a CD-DA disc,
Adjust the volume.
Press VOLUME +/ (or VOL +/ on
.
the unit)
1ꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Repeat Play
All tracks or files on a disc are played
Listening to the radio
repeatedly up to five times.
“REP1” indicates that a single track or file is
repeated until you stop it.
1
Select “FM”or “AM.”
Press TUNER/BAND
repeatedly.
Notes on playing MPꢁ discs
Do not save other types of files or
unnecessary folders on a disc that has MP3
files.
2
Select the tuning mode.
Press TUNING MODE
repeatedly
until “AUTO” appears.
Folders that have no MP3 files are skipped.
MP3 files are played back in the order that
3
4
Tune in the desired station.
they are recorded onto the disc.
Press +/ (or TUNE +/ on
e system can only play MP3 files that have
a file extension of “.MP3”.
the unit) . Scanning stops
automatically when a station is tuned
in, and then “TUNED” and “ST” (for
stereo programs only) appear.
If there are files on the disc that have the
“.MP3” file extension, but that are not MP3
files, the unit may produce noise or may
malfunction.
e maximum number of:
folders is 255 (including the root folder).
MP3 files is 511.
MP3 files and folders that can be
contained on a single disc is 512.
folder levels (the tree structure of files) is
8.
Compatibility with all MP3 encoding/writing
soſtware, recording device, and recording
media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted
audio or may not play at all.
Adjust the volume.
Press VOLUME +/ (or VOL +/ on
.
the unit)
To stop automatic scanning
.
Press
Notes on playing multisession discs
To tune in a station with a weak signal
If the disc begins with a CD-DA (or MP3)
session, it is recognized as a CD-DA (or
MP3) disc, and other sessions are not played
back.
A disc with a mixed CD format is recognized
as a CD-DA (audio) disc.
If “TUNED” does not appear and the
scanning does not stop, press TUNING
MODE
repeatedly until “AUTO” and
“PRESET” disappear, and then press
+/ (or TUNE +/ on the unit)
repeatedly to tune in the desired station.
To reduce static noise on a weak FM
stereo station
Press FM MODE
repeatedly until
“MONO” appears to turn off stereo
reception.
1ꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to music of a
Bluetooth mobile phone or
Bluetooth device
Using the Bluetooth
function
is system supports Bluetooth A2DP
and AVRCP profiles. For details on
Bluetooth wireless technology, see
“Bluetooth wireless technology” (page
32).
You can listen to music from your
Bluetooth mobile phone or Bluetooth
device over a wireless connection.
Check the websites below for the latest
information about compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
ElectronicsSupport/>
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
Follow the procedure below to listen to
music from Bluetooth devices with this
system.
Pairing this system with a Bluetooth
device
Connecting to registered devices
Playing music of a Bluetooth device
For details about the operations of
the Bluetooth device, also refer to the
operation manual supplied with your
Bluetooth device.
1ꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Pairing this system with a Bluetooth
device
4
Enter the passcode.
Passcode entry may be required
depending on the type of Bluetooth
device.
Pairing is an operation where Bluetooth
devices register with each other
beforehand. Use the procedure below
to pair the system with your Bluetooth
device. Once a pairing operation is
performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music of
a Bluetooth device” (page 16).
When “PIN” appears, enter the
passcode at the system as follows:
1
Place the Bluetooth device to be
connected to this system within
1 meter of the system.
Press / and / on the
remote (or
+/ and /
on the unit)
to enter the
same passcode that was entered at
the Bluetooth device, and then press
2
3
Select the Bluetooth function.
.
ENTER
Press BLUETOOTH
the unit.
on
Once pairing is completed and the
connection is established, the system
display changes as follows:
Operate the Bluetooth device
and perform the pairing
operation.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
When searching for this system with
the Bluetooth device, a list of the
devices found may appear in the
Bluetooth device display depending
on the type of Bluetooth device.
is system appears as “CMT-
BX5BT.”
When establishing a connection with
this system, select the audio profile
(A2DP, AVRCP) at the Bluetooth
device. If the Bluetooth device does
not support the AVRCP profile, you
cannot perform playback or other
operations with the system (page 16).
“CONNECT”
Name of the
Bluetooth device
To cancel passcode entry partway
.
Press
Notes
“Passcode” may be called “Passkey,” “PIN
code,” “PIN number” or “Password,” etc.
depending on the device.
is system only supports numerical
passcodes up to 4 digits.
e pairing standby status of the system is
cancelled aſter about 30 seconds. If pairing is
not successful, redo the procedure from step
1.
While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
Continued
1ꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To erase all the pairing registration
information
3
4
Start playback.
Press (or BLUETOOTH on
.
the unit)
on the
1
Press BLUETOOTH
unit.
Depending on the Bluetooth device,
you may need to start up the AV
soſtware of the Bluetooth device
beforehand.
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
Adjust the volume.
and hold BLUETOOTH OPR
on
Press VOLUME +/ (or VOL +/ on
the unit for about 2 seconds to put the
system in Bluetooth standby mode.
.
the unit)
2
3
Press CLEAR
.
To check the address of a connected
Bluetooth device
“DELETE?” appears.
Press DISPLAY
while the Bluetooth
.
Press ENTER
device name appears in the system
display.
e Bluetooth device address appears for
8 seconds.
“COMPLETE” appears and all the
pairing information is erased.
Note
In order to connect with a Bluetooth device
aſter performing this operation, you must enter
the passcode again.
To cancel the connection with a
Bluetooth device
Press and hold BLUETOOTH OPR
Playing music of a Bluetooth device
on the unit for about 2 seconds until
“DISCONNCT” appears, or until the
information on the display (device name,
etc.) disappears.
You can operate a Bluetooth device by
connecting the system and a Bluetooth
device using AVRCP. If the system is not
connected with a Bluetooth device using
AVRCP, “NOT IN USE” appears when
you operate the system.
Other operation
To
Press
1
2
Select the Bluetooth function.
Pause playback (or BLUETOOTH
Press BLUETOOTH
the unit.
on
.
on the unit)
.
Stop playback
Select a file
Find a point in Hold down /
a file
.
/
Establish a connection from the
Bluetooth device.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
.
Note
ese operations may not be available for
certain Bluetooth devices. In addition, the
Once the connection is established,
the system display changes as follows:
actual operations may differ depending on the
connected Bluetooth device.
“CONNECT”
Name of the
Bluetooth device
1ꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on connections with Bluetooth
devices
If you cannot connect with a paired
Bluetooth device, perform the pairing
operation between the system and the
Bluetooth device again.
Listening to music on this
system using Bluetooth
headphones
You can listen to music played on this
system using your Bluetooth headphones
over a wireless connection.
Depending on the type of Bluetooth device,
you can adjust the volume using the controls
of the Bluetooth device.
When BLUETOOTH
on the unit
is pressed while connected to Bluetooth
headphones, it may take some time until
a connection is made to the system from
another Bluetooth device.
Follow the procedure below to listen
to music on this system with Bluetooth
headphones.
Pairing this system with Bluetooth
headphones
Connecting to registered headphones
Playing music on this system
For details about the operations of the
Bluetooth headphones, also refer to the
operation manual supplied with your
Bluetooth headphones.
Continued
1ꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Pairing this system with Bluetooth
headphones
To cancel passcode entry partway
.
Press
Pairing is an operation where Bluetooth
devices register with each other
Notes
“Passcode” may be called “Passkey,” “PIN
code,” “PIN number” or “Password,” etc.
depending on the device.
is system only supports numerical
passcodes up to 4 digits.
e pairing standby status of the system is
cancelled aſter about 30 seconds. If pairing is
not successful, redo the procedure from step
1.
beforehand. Use the procedure below
to pair the system with your Bluetooth
headphones. Once a pairing operation
is performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music on
this system” (page 19).
1
Select a function other than the
Bluetooth function.
While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
Press FUNCTION
repeatedly.
Pairing may not be possible if other
Bluetooth devices are present around the
system. In this case, turn off the other
Bluetooth devices.
2
Place the Bluetooth
headphones to be connected
to this system within 1 meter of
the system.
To erase all the pairing registration
information
3
4
Put the Bluetooth headphones
in pairing mode.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
on the
1
Press BLUETOOTH
unit.
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
Press and hold BLUETOOTH
and hold BLUETOOTH OPR
on
the unit for about 2 seconds to put the
system in Bluetooth standby mode.
OPR
on the unit for about 7
seconds until the BLUETOOTH
indicator
flashes.
.
2
3
Press CLEAR
Sound output from the speakers is
stopped.
“DELETE?” appears.
.
Press ENTER
“COMPLETE” appears and all the
pairing information is erased.
5
Enter the passcode.
Follow the same procedure as in
step 4 of “Pairing this system with a
Bluetooth device” (page 15).
Note
To connect with Bluetooth headphones aſter
performing this operation, you must enter the
passcode again.
Once pairing is completed and the
connection is established, the system
display changes as follows:
“CONNECT”
Name of the
Bluetooth device
1ꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing music on this system
4
Adjust the volume.
You can operate this system from
Bluetooth headphones by connecting the
system and Bluetooth headphones using
AVRCP.
Press VOLUME +/ (or VOL +/ on
.
the unit)
To cancel the connection with
Bluetooth headphones
1
Select a function other than the
Bluetooth function.
Press and hold BLUETOOTH OPR
on the unit for about 2 seconds until the
Press FUNCTION
repeatedly.
BLUETOOTH indicator
turns off.
2
Establish a connection with the
Bluetooth headphones.
Notes
If you cannot connect with paired Bluetooth
headphones, perform the pairing operation
between the system and the Bluetooth
headphones again.
Press and hold BLUETOOTH OPR
on the unit for about 2 seconds
until the BLUETOOTH indicator
lights up, then release the button.
When the system is changed to a function
other than the Bluetooth function and
If more than one Bluetooth device
BLUETOOTH OPR
on the unit is pressed
that has been connected in the past is
present around the system, the system
attempts to connect with up to the
3 most recently connected devices.
(Connection is attempted with up
to 3 devices in order from the most
recently connected device, and the
attempts end when a connection is
established.
while connected to a Bluetooth device, it may
take some time until a connection is made
with the Bluetooth headphones.
is system stores separate volume settings
for when listening through the speakers or
PHONES jack , or when listening through
Bluetooth headpnoes.
Once the connection is established,
the system display changes as follows:
“CONNECT”
Name of the
Bluetooth device
3
Start playback of the music for
the function selected in step 1.
Depending on the type of Bluetooth
headphones, you can operate this
system (playback, volume control,
etc.) using the headphone’s controls.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
1ꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using optional audio
components
Adjusting the sound
To add a sound effect
To
Press
1
Connect additional audio
component to the AUDIO
Generate a
more dynamic
sound
DSGX
on the unit.
IN jack
on the unit using
an audio analog cord (not
supplied).
(Dynamic
Sound
Generator
X-tra)
2
Turn down the volume.
Press VOLUME (or VOL on the
Set the sound EQ
effect
repeatedly
.
unit)
to select “BASS”
or “TREBLE,” and
3
4
5
Select the AUDIO IN function.
then press +/
repeatedly to adjust the
level.
Press AUDIO IN
.
Start playing the connected
component.
Adjust the volume.
Press VOLUME +/ (or VOL +/ on
.
the unit)
ꢀ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the display
To
Press
Change
DISPLAY
repeatedly
information on when the system is on.
the display1)2)
Check the
DISPLAY
when
clock when the the system is off3). e
system is off
clock is displayed for 8
seconds.
1)
For example, you can view CD/MP3 disc
information, such as the track or file number
or folder name during normal play, or
the total playing time while the player is
stopped.
When the system and a Bluetooth device are
connected using the Bluetooth function, you
can view the Bluetooth device address.
2)
3)
e STANDBY indicator
on the unit
lights up when the system is off.
Notes on the display information
Characters that cannot be displayed appear
as “_”.
e following are not displayed:
total playing time for a CD-DA disc
depending on the play mode.
total playing time and remaining playing
time for an MP3 disc.
e following are not displayed correctly:
folder and file names that do not follow
either the ISO9660 Level 1, Level 2 or
Joliet in the expansion format.
e following is displayed:
ID3 tag information for MP3 files when
ID3 version 1 and version 2 tags are used
(up to 62 characters).
ꢀ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press ENTER
to add the track
Other Operations
or file to the program.
“ . ” appears when the total
program time exceeds 100 minutes
for a CD, or when you select a CD
track whose number is 21 or over, or
when you select an MP3 file.
Creating your own
program
(Program Play)
5
6
Repeat steps 3 through 4 to
program additional tracks or
files, up to a total of 25 tracks or
files.
1
2
Press CD
function.
to select the CD
Press PLAY MODE
until “PGM”appears while the
system is stopped.
repeatedly
To play your program of tracks
.
or files, press
e program remains available until
you open the disc tray. To play the
repeatedly
3
Press /
until the desired track or file
number appears.
.
same program again, press
When programming files, press
To cancel Program Play
+/
repeatedly to select the
Press PLAY MODE
repeatedly until
desired folder, and then select the
desired file.
Example: When programming tracks
on a CD
“PGM” disappears while the system is
stopped.
To delete the last track or file of the
program
Press CLEAR
stopped.
while the system is
Selected track or file number Total playing time of
program (including
selected track or file)
ꢀꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
6
To call up a preset radio
Presetting radio
stations
You can preset your favorite radio
stations and tune them in instantly
by selecting the corresponding preset
number.
Use buttons on the remote to preset
stations.
station, press TUNING MODE
repeatedly until “PRESET”
appears, and then press +/
repeatedly to select the desired
preset number.
1
Tune in the desired station (see
“Listening to the radio”(page
13)).
.
2
Press TUNER MEMORY
Preset number
repeatedly to
select your desired preset
number.
3
Press +/
If another station is already assigned
to the selected preset number,
the station is replaced by the new
stations.
.
4
5
Press ENTER
Repeat steps 1 through 4 to
store other stations.
You can preset up to 20 FM and 10
AM stations. e preset stations are
retained for about half a day even if
you disconnect the power cord or if a
power failure occurs.
ꢀꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Use the same procedure as in
step 4 to set the time to stop
playing.
Using the Timers
e system offers two timer functions.
If you use the Play Timer with the Sleep
Timer, the Sleep Timer has priority.
Select the sound source.
Press /
repeatedly until
Sleep Timer:
the desired sound source appears, and
You can fall asleep to music. is
function works even if the clock is not
set.
then press ENTER . e display
shows the timer settings.
to turn off the
7
Press /
Press SLEEP
repeatedly.
system.
If you select “AUTO,” the system
automatically turns off aſter the current
disc stops or in 100 minutes.
e system turns on 15 seconds
before the preset time. If the system is
on at the preset time, the Play Timer
will not play.
Play Timer:
You can wake up to CD or tuner at a
preset time.
Use buttons on the remote to control the
Play Timer. Make sure you have set the
clock.
Note
Before the system is turned off, if a connection
is made with the Bluetooth headphones,
sounds played by the Play Timer may be output
to the Bluetooth headphones.
To activate or check the timer again
1
Prepare the sound source.
Press CLOCK/TIMER SELECT , press
Prepare the sound source, and then
/
repeatedly until “PLAY
press VOLUME +/
to adjust the
SEL” appears, and then press ENTER
.
volume.
To start from a specific track or file,
create your own program (page 22).
To cancel the timer
Repeat the same procedure as above until
“TIMER OFF” appears, and then press
.
2
3
Press CLOCK/TIMER SET
.
ENTER
Press /
repeatedly
To change the setting
to select “PLAY SET,”and then
Start over from step 1.
.
press ENTER
“ON” appears, and the hour
indication flashes.
Tip
e Play Timer setting remains as long as the
setting is not canceled manually.
4
Set the time to start playing.
Press /
repeatedly to set
.
the hour, and then press ENTER
e minute indication flashes. Use the
procedure above to set the minutes.
ꢀꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the system to a different wall
socket.
Others
Install a noise filter (available
separately) to the power cord.
Troubleshooting
There is no sound.
If the BLUETOOTH indicator
is lit
1
Make sure the power cord and
speaker cords are correctly and firmly
connected.
or flashing when a function other than
the Bluetooth function is selected, no
sound is heard through the speakers
or PHONES jack . Press and hold
2
Find your problem in the checklist
below, and take the indicated
corrective action.
BLUETOOTH OPR
for about
2 seconds until the BLUETOOTH
indicator
turns off.
If the issue persists, contact your
nearest Sony dealer.
The remote does not function.
Remove any obstacles between the
If the STANDBY indicator flashes
Immediately unplug the power cord,
and check the following items.
If your system has a voltage
selector, is the voltage selector set to
the correct voltage?
remote and the remote sensor
on
the unit, and position the unit away
from fluorescent lights.
Point the remote at the system’s sensor.
Move the remote closer to the system.
Are you using only the supplied
speakers?
CD/MP3 player
Is anything blocking the ventilation
holes on the top or back of the
system?
The sound skips, or the disc will not
play.
Wipe the disc clean, and replace it.
Move the system to a location away
from vibration (for example, on top of
a stable stand).
Move the speakers away from the
system, or place them on separate
stands. At high volume, speaker
vibration may cause the sound to skip.
Aſter the STANDBY indicator
stops flashing, reconnect the power
cord, and turn on the system. If the
issue persists, contact your nearest
Sony dealer.
General
Play does not start from the first
track.
Sound comes from one channel,
or the left and right volumes are
unbalanced.
Place the speakers as symmetrically as
possible.
Press PLAY MODE
repeatedly until
both “PGM” and “SHUF” disappear to
return to normal play.
Connect only the supplied speakers.
Severe hum or noise.
Move the system away from sources of
noise.
Continued
ꢀꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting playback takes more time
than usual.
e following discs take a longer time
to start playback.
a disc recorded with a complicated
tree structure.
a disc recorded in multisession
mode.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
The sound of your Bluetooth device
cannot be heard on this system.
Turn up the volume on your Bluetooth
a disc that has not been finalized (a
disc to which data can be added).
a disc that has many folders.
device first, and then adjust the volume
.
using VOLUME +/
Severe hum or noise
Bluetooth device
If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
Pairing cannot be done.
Move the Bluetooth device closer to
the system.
Pairing may not be possible if other
Bluetooth devices are present around
the system. In this case, turn off the
other Bluetooth devices.
Turn down the volume of the
connected Bluetooth device.
Connection is not possible.
e Bluetooth device you attempted
to connect does not support the A2DP
and AVRCP profiles, and cannot be
connected with the system.
Enable the Bluetooth function of the
Bluetooth device.
e pairing registration information
has been erased. Perform the pairing
operation again.
While connected to a Bluetooth device,
this system cannot be detected and a
connection cannot be established from
another Bluetooth device.
The sound from the Bluetooth
headphones is distorted.
Turn down the volume of the system
using VOLUME . If your
headphones have a volume control,
also adjust the volume using the
headphone’s volume control.
Press DSGX
on the unit repeatedly
until “DSGX OFF” appears.
Press EQ
repeatedly to select
“BASS” or “TREBLE,” and then press
level.
repeatedly to turn down the
The sound skips or fluctuates, or the
connection is lost.
Tuner
e system and the Bluetooth device
Severe hum or noise, or stations
cannot be received. (“TUNED” or “ST”
flashes on the display.)
are too far apart.
If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
Connect the antenna properly.
Find a location and an orientation that
provide good reception, and then set
up the antenna again.
ꢀꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep the antennas away from the
speaker cords and the power cord to
avoid picking up noise.
Connect a commercially available
external antenna.
Consult your nearest Sony dealer if the
supplied AM antenna has come off the
plastic stand.
To reset the system to factory settings
If the system still does not operate
properly, reset the system to factory
settings.
Use buttons on the unit to reset the
system to its factory default settings.
1
Disconnect and reconnect the power
cord, and then turn on the system.
Turn off nearby electrical equipment.
2
Press
/
, /CANCEL
and
To change the AM tuning interval
at the same time.
e AM tuning interval is factory-preset
to 9 kHz (or 10 kHz, for some areas).
Use buttons on the unit to change the
AM tuning interval.
All user-configured settings, such as
preset radio stations, timer, and the
clock, are deleted.
1
Tune in any AM station, and then
turn off the system.
2
While holding down TUNER/BAND
, press /
.
All the AM preset stations are erased.
To reset the interval to the factory
preset, repeat the procedure.
To improve tuner reception
Turn off CD player power by using the
CD power management function. By
default, CD power is turned on.
repeatedly to
select the CD function, and then turn
off the system.
1
Press FUNCTION
2
After “STANDBY”stops flashing, press
/
on the unit while holding
down /CANCEL
on the unit.
“CD POWER OFF” appears. With CD
player power turned off, disc access
time is increased. To turn on CD
player power, repeat the procedure
until “CD POWER ON” appears.
ꢀꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth device
Messages
CONNECT: Bluetooth communication
was established.
CD/MP3 player, Tuner
DISCONNCT: Communication with a
Bluetooth device was cut off for some
reason, or Bluetooth communication
was ended.
NO DEVICE: A pairable Bluetooth device
was not found, or connection was not
possible.
NOT IN USE: e system is not
connected with a Bluetooth device
using AVRCP.
PIN: e system is asking for the
passcode. For details, see “Using the
Bluetooth function” (page 14).
CD OVER: You have reached the end of
the disc while pressing
playback or pause.
COMPLETE: e preset operation ended
normally.
INVALID: You pressed an invalid button.
LOCKED: e disc tray does not open.
Contact your nearest Sony dealer.
NO DISC: ere is no disc in the system,
or you have loaded a disc that cannot
be played.
NO STEP: All of the programmed tracks
or files have been erased.
PUSH SELECT: You tried to set the clock
or timer during timer operation.
during
PLEASE WAIT: e system is readying
for usage of a Bluetooth device.
PUSH STOP: You pressed PLAY MODE
during playback.
READING: e system is reading
information of the disc. Some buttons
are not available.
SET CLOCK: You tried to select the timer
when the clock is not set.
SET TIMER: You tried to select the timer
when the Play Timer is not set.
STEP FULL: You tried to program more
than 26 tracks or files (steps).
TIME NG: e Play Timer start and end
times are set to the same time.
ꢀꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Display examples
Precautions
Discs that this system CAN play
Audio CD
Display
indicates
2 (two)
5 (five)
CD-R/CD-RW (audio data/MP3 files)
6 (six)
Discs that this system CANNOT play
8 (eight)
CD-ROM
CD-R/CD-RW other than those
recorded in music CD format or MP3
format conforming to ISO9660 Level
1/Level 2, Joliet or multisession
CD-R/CD-RW recorded in
multisession that have not ended by
“closing the session”
CD-R/CD-RW of poor recording
quality, CD-R/CD-RW that have
scratches or are dirty, or CD-R/CD-
RW recorded with an incompatible
recording device
CD-R/CD-RW which is finalized
incorrectly
Discs containing files other than
MPEG 1 Audio Layer-3 (MP3) files
Discs of non-standard shape (for
example, heart, square, star)
Discs that have adhesive tape, paper, or
sticker attached to them
0 (zero)
A
B
D
G
H
K
M
O
Q
R
S
Rental or used discs with attached seals
where the glue extends beyond the seal
Z
|
Discs that have labels printed using ink
that feels tacky when touched
”
$
Notes on discs
Before playing, wipe the disc with a
cleaning cloth from the center out to
the edge.
Do not clean discs with solvents, such
as benzine thinner, or commercially
available cleaners or anti-static spray
intended for vinyl LPs.
Do not expose discs to direct sunlight
or heat sources such as hot air ducts,
nor leave it in a car parked in direct
sunlight.
%
,
.
?
@
^
Continued
ꢀꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
On safety
On the speaker system
is speaker system is not magnetically
shielded, and the picture on nearby TV
sets may become magnetically distorted.
In this situation, turn off the TV, wait
15 to 30 minutes, and turn it back on.
If there is no improvement, move the
speakers far away from the TV.
Completely disconnect the power
cord (mains lead) from the wall socket
(mains) if it is not going to be used
for an extended period of time. When
unplugging the unit, always grip the
plug. Never pull the cord itself.
Should any solid object or liquid get
into the system, unplug the system, and
have it checked by qualified personnel
before operating it again.
Cleaning the cabinet
Clean this system with a soſt cloth
slightly moistened with a mild detergent
solution. Do not use any type of abrasive
pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
e AC power cord can be changed
only by a qualified service facility.
On placement
Do not place the system in an inclined
position or in locations that are
extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation,
or subject to vibration, direct sunlight
or a bright light.
Be careful when placing the unit
or speakers on surfaces that have
been specially treated (for example,
with wax, oil, polish) as staining or
discoloration of the surface may result.
If the system is brought directly
from a cold to a warm location or is
placed in a very damp room, moisture
may condense on the lens inside the
CD player, and cause the system to
malfunction. In this situation, remove
the disc, and leave the system turned
on for about an hour until the moisture
evaporates.
On heat buildup
Heat buildup on the unit during
operation is normal and is not cause
for alarm.
Do not touch the cabinet if it has been
used continuously at a high volume
because the cabinet may have become
hot.
Do not obstruct the ventilation holes.
ꢁ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
antenna’s performance, operating system,
soſtware application, etc.
Bluetooth standard profiles indicate the
purpose of Bluetooth communication
between devices.
Specifications
2)
Main unit (HCD-BX5BT/Compact Disc
Receiver)
CD player section
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
System: Compact disc and digital audio
system
HARMONIC DISTORTION:
Laser Diode Properties
With 6 ohm loads, both channels driven,
from 120 10,000Hz; rated 12 watts per
channel minimum RMS power, with no
more than 10% total harmonic distortion
from 250 milliwatts to rated output.
Emission duration: continuous
Laser Output*: Less than 44.6µW
* is output is the value measurement
at a distance of 200mm from the
objective lens surface on the Optical
Pick-up Block with 7mm aperture.
Frequency response: 20 Hz 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Amplifier section
Continuous RMS power output
(reference): 15 + 15 watts (6 ohms at
1 kHz, 10% THD)
Inputs:
Tuner section
FM stereo, FM/AM superheterodyne tuner
AUDIO IN (stereo mini jack):
voltage 250 mV, impedance 47
kilohms
FM tuner section:
Tuning range: 87.5 108.0 MHz (100 kHz
step)
Outputs:
PHONES (stereo mini jack): accepts
headphones of 8 ohms or more
SPEAKER: accepts impedance of 6 to
16 ohms
Antenna: FM lead antenna
Antenna terminals: 75 ohms unbalanced
Intermediate frequency: 10.7 MHz
AM tuner section:
Bluetooth section
Communication system:
Bluetooth Standard version 2.0
Output:
Tuning range:
530 1,710 kHz (with 10 kHz tuning
interval)
531 1,710 kHz (with 9 kHz tuning
interval)
Bluetooth Standard Power Class 2
Maximum communication range:
Line of sight approx. 10 m1)
Frequency band:
Antenna: AM loop antenna, external
antenna terminal
Intermediate frequency: 450 kHz
2.4 GHz band (2.4000 GHz 2.4835
GHz)
Speaker (SS-CBX5)
Modulation method:
Speaker system: Full Range 10 cm, cone
type
FHSS
Compatible Bluetooth profiles2):
A2DP (Advanced Audio Distribution
Profile)
Nominal impedance: 6 ohms
Dimensions (w/h/d): Approx. 140 × 245 ×
210 mm
AVRCP (Audio Video Remote
Control Profile)
Supported codecs:
Mass: Approx. 1.9 kg net per speaker
Receive: SBC (Sub Band Codec), MP3
Transmit: SBC (Sub Band Codec)
e actual range will vary depending on
1)
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity,
Continued
ꢁ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
General
Power requirements: 120 V AC, 60 Hz
Bluetooth wireless
technology
Bluetooth wireless technology is a short-
range wireless technology linking digital
devices, such as personal computers and
digital still cameras. Using the Bluetooth
wireless technology, you can operate the
units involved within a range of about 10
meters.
Power consumption: 40 watts
Dimensions (w/h/d) (excl. speakers):
Approx. 200 × 132 × 298 mm
Mass (excl. speakers): 3.5 kg
Supplied accessories: Remote Commander
(RM-SC31) (1), R6 (Size AA) batteries (2),
AM loop antenna (1), FM lead antenna (1)
Design and specifications are subject to
change without notice.
e Bluetooth wireless technology is
commonly used between two devices,
but a single device can be connected to
multiple devices.
You do not need wires to get connected
as you do with a USB connection, and
you do not need to place the devices face
to face as you do with wireless infrared
technology. You can use the technology
with one Bluetooth device in your bag
or pocket.
Standby power consumption:
0.5 W
Halogenated flame retardants
are not used in the certain
printed wiring boards.
Bluetooth wireless technology is a global
standard supported by thousands of
companies. ese companies produce
products that meet the global standard.
Supported Bluetooth version and
profiles
Profile refers to a standard set of
capabilities for various Bluetooth product
capabilities. is system supports the
following Bluetooth version and profiles.
Supported Bluetooth version:
Bluetooth Standard version 2.0
Supported Bluetooth profiles:
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote
Control Profile)
ꢁꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Effective communication range
is system supports security functions that
comply with the Bluetooth specification
as a means of ensuring security during
communication using Bluetooth technology.
However, this security may be insufficient
depending on the setting contents and
other factors, so always be careful when
performing communication using Bluetooth
technology.
Sony cannot be held liable in any way
for damages or other loss resulting from
information leaks during communication
using Bluetooth technology.
Bluetooth devices should be used within
approximately 10 meters (unobstructed
distance) of each other. e effective
communication range may become
shorter under the following conditions.
When a person, metal object, wall
or other obstruction is between the
devices with a Bluetooth connection
Locations where a wireless LAN is
installed
Around microwave ovens that are in
use
Locations where other electromagnetic
waves occur
Bluetooth communication is not necessarily
guaranteed with all Bluetooth devices that
have the same profile as this system.
Bluetooth devices connected with this system
must comply with the Bluetooth specification
prescribed by the Bluetooth SIG, Inc., and
must be certified to comply. However, even
when a device complies with the Bluetooth
specification, there may be cases where
the characteristics or specifications of the
Bluetooth device make it impossible to
connect, or may result in different control
methods, display or operation.
Noise may occur or the audio may
cut off depending on the Bluetooth
device connected with this system,
the communications environment, or
surrounding conditions.
Effects of other devices
Bluetooth devices and wireless LAN
(IEEE 802.11b/g) use the same frequency
band (2.4 GHz). When using your
Bluetooth device near a device with
wireless LAN capability, electromagnetic
interference may occur. is could result
in lower data transfer rates, noise, or
inability to connect. If this happens, try
the following remedies:
Try connecting this system and
Bluetooth mobile phone or Bluetooth
device when you are at least 10
meters away from the wireless LAN
equipment.
Turn off the power to the wireless LAN
equipment when using your Bluetooth
device within 10 meters.
Effects on other devices
e radio waves broadcast by this system
may interfere with the operation of some
medical devices. Since this interference
may result in malfunction, always turn
off the power on this system, Bluetooth
mobile phone and Bluetooth device in
the following locations:
In hospitals, on trains, in airplanes,
at gas stations, and any place where
flammable gasses may be present
Near automatic doors or fire alarms
ꢁꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Bluetooth
devices
You can check the websites below for the
Bluetooth compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
ElectronicsSupport/>
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
ꢁꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|
