2-674-627-11(3)
Micro Hi-Fi
Component
System
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear of the unit. Record the serial number
in the space provided below. Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No. ______________
Serial No. ______________
CMT-DX2D
CMT-SX2D
©2006 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTICE FOR THE CUSTOMERS IN CANADA
CAUTION
The use of optical instruments with this product will
increase eye hazard.
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over to the
applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of this product. The
recycling of materials will help to conserve natural
resources. For more detailed information about
recycling of this product, please contact your local
Civic Office, your household waste disposal service or
the shop where you purchased the product.
3GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Recording your favorite CD tracks on a
Playing VIDEO CDs with PBC functions
(CMT-SX2D Asian and Oceanian
Playing repeatedly.................................18
— Repeat Play
Using the on-screen display to
Adjusting the image and audio
Adjusting the brightness of the
Viewing information about the disc in the
Viewing information about the disc in the
4GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the THEATRE SYNC
Listening to audio from a connected
Enjoying the 5.1 channel sound with the
Recording audio from a connected
Recording on a connected
5GB
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use this manual
Playable discs
You can play back the following discs on this
system. Other discs cannot be played back.
• This manual mainly explains operations using
the remote, but the same operations can also
be performed using the buttons on the unit
having the same or similar names.
• The OSD (on-screen display) may vary
depending on the country model.
List of playable discs
Format of discs Disc logo
DVD VIDEOs
• The English OSD screen (on-screen display)
is used for illustration purposes only.
• “DVD” may be used as a general term for
DVD VIDEOs, DVD+RWs/DVD+Rs and
DVD-RWs/DVD-Rs.
DVD-RWs/
DVD-Rs
• The following symbols are used in this
manual.
Symbol
Meaning
DVD+RWs/
DVD+Rs
Functions available for DVD
VIDEOs, DVD-Rs/DVD-RWs in
video mode, and DVD+Rs/
DVD+RWs
Functions available for VIDEO
CDs (including Super VCDs or
CD-Rs/CD-RWs in video CD
format or Super VCD format)
VIDEO CDs
Audio CDs
Functions available for music
CDs or CD-Rs/CD-RWs in music
CD format
CD-Rs/CD-RWs
Functions available for DATA
CDs (CD-ROMs/CD-Rs/CD-
RWs containing MP3* audio
tracks and JPEG image files)
*MP3 (MPEG1 Audio Layer 3) is a standard format
defined by ISO/MPEG which compresses audio
data.
“DVD VIDEO,” “DVD-R” and “DVD-RW” logos are
trademarks.
6GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Region code of DVDs you can
play on this system
Notes about CD-R/CD-RW/
DVD-R/DVD-RW (Video mode)/
DVD+R/DVD+RW
Your system has a region code printed on the
back of the unit and will only play DVDs labeled
with identical region code.
• In some cases, CD-Rs, CD-RWs, DVD-Rs,
DVD-RWs (Video mode) (DVD-RWs
created in video mode have the same format
as a DVD VIDEO), DVD+R or DVD+RW
cannot be played on this system depending
upon the recording quality or physical
condition of the disc, or the characteristics of
the recording device. Furthermore, the disc
will not play if it has not been correctly
finalized. For more information, see the
operating instructions for the recording
device. Note that some playback functions
may not work with some DVD+RWs/
DVD+Rs, even if they have been correctly
finalized.
ALL
DVDs labeled
system.
will also be played on this
If you try to play any other DVD, the message
“Playback Prohibited by Area Limitations.” will
appear on the TV screen. Depending on the
DVD, no region code indication may be labeled
even though playing the DVD is prohibited by
area restrictions.
Discs that this system cannot
play
• CD-ROMs (except for extension “.MP3”,
“.JPG” or “.JPEG”)
• CD-Rs/CD-RWs other than those recorded in
the following formats:
• A disc recorded in packet write format cannot
be played.
– music CD format
– video CD format
Note on playback operations
of DVDs and VIDEO CDs
– MP3 (MPEG1 Audio Layer-3)/JPEG
format that conforms to ISO9660* Level 1/
Level 2 or Joliet
• CD-ROMs recorded in PHOTO CD format.
• Data part of CD-Extras
• Super Audio CDs
• DVD-ROMs
• DVD-RAMs
• DVD Audio discs
Some playback operations of DVDs and VIDEO
CDs may be intentionally set by software
producers. Since this system plays DVDs and
VIDEO CDs according to the disc contents the
software producers designed, some playback
features may not be available. Also, refer to the
instructions supplied with the DVDs or VIDEO
CDs.
• A DVD with a different region code.
• DVD+R DL (Double layer) discs
• DVD-RWs recorded in VR (Video
Recording) mode
Music discs encoded with
copyright protection
technologies
• Photo-movies created after shooting on a
DVD camcorder in VR (Video Recording
format) mode
This product is designed to playback discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
• Discs with non-standard shapes (e.g., heart,
square, star) cannot be played on this unit.
Attempting to do so may damage the unit. Do
not use such discs.
• A disc with paper or stickers on it.
• A disc that has the adhesive, cellophane tape,
or a sticker still left on it.
* A logical format of files and folders on a CD-ROMs,
defined by ISO (International Organization for
standardization).
continued
7GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Note on DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side.
However, since the audio material side does not
conform to the Compact Disc (CD) standard,
playback on this product is not guaranteed.
Cautions when playing a disc
that is recorded in Multi
Session
• When playing a disc which contains audio
tracks in music CD format, MP3 audio tracks
and JPEG image files, only the audio tracks in
music CD format can be played back.
• CD-R and CD-RW discs recorded in multi-
session that have not ended by “closing the
session” are not supported.
Copyrights
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
This system incorporates Dolby1) Digital and DTS2)
Digital Surround System.
1)
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
2)
Manufactured under license from Digital Theater
Systems, Inc. “DTS” and “DTS 2.0 + Digital Out”
are trademarks of Digital Theater Systems, Inc.
8GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Hooking up the system
Perform the following procedures 1 to 6 to hook up your system using the supplied cords and
accessories. The terminals on the rear side vary depending on the country model. Be sure to check the
connection procedure.
European and Russian models
AM loop antenna
FM antenna
Front speaker (Right)
Other models
Front speaker (Left)
AM loop antenna
FM antenna
Front speaker (Right)
Front speaker (Left)
continued
9GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug type C
1 Connect the speakers.
Insert only the
stripped portion*
Connect the right and left speaker cords to
the SPEAKER jacks as shown below.
AM loop antenna
Insert only the stripped portion
Gray/Solid (3)
Black/Stripe (#)
Extend the FM lead
antenna horizontally
North American model:
Connect white side.
2 Connect the FM and AM antennas.
Other models:
Connect brown side.
Set up the AM loop antenna, then connect
it.
* Strip off an end-portion of wire covering.
Note
Keep the antennas away from the speaker cords.
3 Connect a TV.
Plug type A
Select one of the following connections.
Insert only the
stripped portion*
AM loop antenna
Connection A (For all models)
If your TV has component video input
jacks, connect your TV to the
COMPONENT VIDEO OUT jacks with a
component video cord (not supplied).
For European and Russian models,
make sure to set the VIDEO OUT
SELECTOR to COMPONENT.
If your TV is compatible with progressive
format file signals, use this connection and
set “PROGRESSIVE.” For details, see “To
Extend the FM lead antenna horizontally
* Strip off an end-portion of wire covering.
Plug type B
Insert only the
stripped portion*
VIDEO OUT SELECTOR*
AM loop antenna
* European and Russian models only
Extend the FM lead antenna horizontally
* Strip off an end-portion of wire covering.
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection B (For European and
When connecting a video deck
Connect the TV and the video deck using video and
audio cords (not supplied) as shown below.
Russian models)
Connect the t INPUT jack of your TV
to the T LINE-TV jack with the SCART
cord (not supplied). Make sure to set
the VIDEO OUT SELECTOR to EURO
AV.
TV
When you connect using the SCART cord,
check that the TV conforms to RGB signals.
If the TV conforms to RGB signals, change
the input mode of the TV to RGB signals.
Refer to the operating instructions supplied
with the TV to be connected.
Video deck
System
Do not connect
directly.
If you connect a video deck between this system and the
TV, you may experience video leakage when watching
the video signal from this system. Do not connect a
video deck between this system and the TV.
Note
Do not place the TV on this system.
4 For models with a voltage selector, set
the VOLTAGE SELECTOR to the local
power line voltage.
Depending on the model, the VOLTAGE
SELECTOR may differ.
Note
Only the video signal will be output through the
SCART cord.
Connection C (Except for European
and Russian models)
Connect the video input jack of your TV
to the VIDEO OUT jack with the video
cable (supplied)*.
5 Connect the power cord to a wall
outlet.
If the supplied adapter on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adapter).
To turn on the system, press ?/1.
Note
Install this system so that the power cord can be
unplugged from the wall socket immediately in the
event of trouble.
* except for European and Russian models
When using a TV
Turn on the TV and select the video input so that you
can view the pictures from this system.
continued
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
6 (Asian and Oceanian models only)
Set the color system to PAL or NTSC
depending on the color system of your
TV.
Inserting two R6 (size AA)
batteries into the remote
The color system is factory set to NTSC for
region code 3 models, and PAL for other
region code models. Each time you perform
the procedure below, the color system
changes as follows:
e
E
E
e
NTSC y PAL
1 Press DVD (or FUNCTION + or –
repeatedly) to switch the function to
DVD.
Playback starts automatically if a disc
with auto playback function is loaded.
Press x to stop playback.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
2 Press ?/1 to turn off the system.
Tip
3 Press ?/1 on the unit while holding
With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.
down x on the unit.
The system turns on and the color
system is changed.
Notes
Attaching the speaker pads
• A disturbance in the TV screen may be present for a
moment after changing the color system as described
above.
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
• When you play back a VIDEO CD recorded in a
different color system from the one you set to the
unit, the picture image may be distorted.
To connect optional components
12GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
Selecting a language
Use buttons on the remote for the operation.
You can change the on-screen display language.
1
2
3
Press ?/1 to turn on the system.
1
Turn on your TV and select the video
input.
Press CLOCK/TIMER SET.
2
3
Press ?/1 to turn on the system.
Press . or > repeatedly to set the
hour.
Press DVD (or FUNCTION + or –
repeatedly) to switch the function to
DVD.
4
5
Press ENTER.
Press . or > repeatedly to set the
minute.
Playback starts automatically if a disc with
auto playback function is loaded. Press xto
stop playback.
6
Press ENTER.
The clock starts working.
4
5
Press
DISPLAY in stop mode.
Press < or , repeatedly to select
“Language,” then press ENTER.
To adjust the clock
1 Press CLOCK/TIMER SET.
2 Press . or > to select “CLOCK SET,”
6
7
Press M or m repeatedly to select
“OSD,” then press ENTER.
then press ENTER.
Press M or m repeatedly to select a
language from the displayed list, then
press ENTER.
3 Do the same procedures as step 3 to 6
above.
Notes
8
Press
DISPLAY to turn off the Setup
• The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
• You cannot set the clock in Power Saving Mode
Display.
13GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a disc
— Normal Play/Shuffle Play
Disc – Play
Loading a disc
Use buttons on the unit for the operation.
Before playing a DVD, VIDEO CD or JPEG
turn on your TV and select the video input.
Depending on the DVD or VIDEO CD, some
operations may be different or restricted. Refer
to the operating instructions supplied with the
disc.
1
2
Press Z.
Place a disc with the label side up on
the disc tray.
Example: When playing a DVD
Chapter number
When you play an 8 cm Disc, place it
on the inner circle of the tray.
Title number
Playing time
3
Press Z again to close the disc tray.
Example: When playing a CD
Notes
• Do not use a disc with tape, seals or paste on it as this
may cause malfunction.
• Do not forcibly press the disc tray closed with your
finger, as this may cause malfunction.
Track number
Playing time
1
2
Press DVD (or FUNCTION + or –
repeatedly) to switch the function to
DVD.
Playback starts automatically if a disc with
auto playback function is loaded.
Press H (or DVD NX on the unit).
Playback starts.
14GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Other operations
• Depending on the DVD or VIDEO CD, some
operations may be restricted.
To
Do this
Stop play
Pause
Press x.
• Maximum number of albums on a disc: 100 (The
maximum number of MP3 audio tracks or JPEG
image files that can be contained on a disc is 999.)
However, when a large number of non-MP3/JPEG
files are present, the maximum number of albums,
tracks and files may decrease.
Press X (or DVD NX on the
unit).1)
Press X again to go to the next frame
(DVD/VIDEO CD only).
Press H (or DVD NX on the unit)
to resume play.
• For data CD, playback is possible up to 16 levels.
• The system supports MP3 audio tracks recorded with
a bit rate of 32 to 320 kbps and a sampling frequency
of 32/44.1/48 kHz for MPEG1 Audio Layer-3.
• An album that does not include an MP3 audio track
or JPEG image file is skipped.
Select a track, Press . or > repeatedly during
image or
chapter
play or pause.
Press . once during play or pause
to go back to the beginning of the
current track (except for MP3).
• If you put the extension “.MP3” to data not in MP3
format, the system cannot recognize the data
properly and will generate a loud noise which could
damage your speaker system.
Locate a point Press m or M during play.
quickly in fast Each time you press the button,
forward or fast searching speed changes.
reverse (Scan) To return to Normal Play, press H
• The following discs take a longer time to start
playback.
(Except for
MP3/JPEG)2)
(or DVD NX on the unit).
– a disc recorded with complicated tree structure.
– a disc recorded in Multi Session.
Play all tracks Press PLAY MODE repeatedly in
on the disc in stop mode until “SHUF” appears in
random order the display, then press H (or DVD
– a disc to which data can be added (non-finalized
disc).
(Shuffle
Play)3)
NX on the unit).
• Some CD-Rs or CD-RWs cannot be played on this
system depending on file format.
Watch frame During play, press
by frame SLOW y. Each time you press the
(Slow-motion button, the playback speed changes.
Play) To return to Normal Play, press H
SLOW4) or
Tip
When playing the data disc contained MP3 audio
tracks and JPEG image files, set “Data CD Priority”
(DVD/VIDEO (or DVD NX on the unit).
CD only)1)2)
Resuming playback from the
point you stopped the disc
— Resume Play (DVD/VIDEO CD/CD only)
Rotate the
current image
(JPEG only)
Press < or ,.
Each time you press ,, the image
turns clockwise by 90º.
Each time you press <, the image
turns counterclockwise by 90º.
This system memorizes the point where you
stopped the disc so you can resume from that
point.
Switch to
Press DVD NX on the unit
DVD function (Automatic Source selection).
from another
source
Playback starts automatically when a
disc is loaded.
1 While playing a disc, press x to stop
playback.
Cut the sound Press MUTING.
Press MUTINGagainor VOLUME +
“RESUME” appears in the display. If
“RESUME” does not appear, Resume Play
is not available.
to restore sound.
Remove a disc Press Z on the unit.
2 Press H (or DVD NX on the unit).
The player starts playback from the point
you stopped the disc in step 1.
1)
There may be some disturbance in the video image.
For DVDs and VIDEO CDs, no sound is output.
2)
3)
You cannot perform Shuffle Play on DVDs and
VIDEO CDs with PBC function.
DVD only
4)
continued
15GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• You cannot perform Resume Play during Shuffle
Play or Program Play.
Playing DVDs using the
menu
• This function may not work properly with some
discs.
• Depending on where you stop the disc, the system
may not resume playback from exactly the same
point.
A DVD is divided into a lot of sections, which
make up a picture or music feature. These
sections are called “titles.” When you play a
DVD which contains several titles, you can
select the title you want using TOP MENU.
When you play DVDs that allow you to select
items such as the language for the subtitles and
the language for the sound, select these items
using MENU.
• Resume play is canceled when:
– you press x in stop mode.
– you turn off the system.
– you open the disc tray.
– you change the play mode.
– you change the function.
Playing a track by entering the
track number in Normal Play
mode (on the remote only)
1
Press TOP MENU or MENU.
The disc’s menu appears on the TV screen.
The contents of the menu vary from disc to
disc.
Press the number button(s) to enter the track
number of the track you want to play.
To enter a track number over 10
1 Enter the corresponding digits.
2 Press ENTER.
2
3
Press M/m/</, or the number
buttons to select the item you want to
play or change.
Example:
To play track number 30, press 3 and 0, then press
ENTER.
Press ENTER.
Selecting an album/track/file
using the on-screen display (MP3/
JPEG only)
Press M/m/</, repeatedly to select a track or
file, then press ENTER.
The selected track or file starts playing.
Notes
• On the TV screen, up to 16 characters can be
displayed for album names, and up to 11 characters
for track/file names. When multiple album names
use the same first 16 characters, the tracks and files
in those albums are displayed together in a single
folder.
• Only the letters in the alphabet and numbers can be
used for album or file names. Anything else is
displayed as “-”.
• If an MP3 audio track is played, indicated elapsed
time may be different from the actual time.
16GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel playback with PBC
functions
Playing VIDEO CDs with
PBC functions (Ver. 2.0)
— PBC Play
1 Press x twice to cancel Resume Play
2 Press MENU repeatedly until “PBC Off”
appears.
3 Press H (or DVD NX on the unit).
Playback starts from the selected track. Still
images, such as the menu screens, will not
be shown.
To return to PBC playback, repeat steps 1
through 3, selecting “PBC On” in step 2.
You can use PBC* menus on your TV screen to
enjoy the disc’s interactive software. The menu
format and structure may differ depending on
each disc.
* PBC: Playback Control
1
2
Press DVD (or FUNCTION + or –
repeatedly) to switch the function to DVD.
Press H (or DVD NX on the unit) to
start playing a VIDEO CD with PBC
functions (Ver. 2.0).
The PBC menu appears on the TV screen.
3
Press the number buttons to select the
item number you want.
4
5
Press ENTER.
Continue playback according to the
instructions on the menus to enjoy
interactive playback.
Refer to the operating instructions supplied
with the disc, as the operating procedure
may differ according to the VIDEO CD.
To go back to a previous menu
Press O RETURN.
Note
Depending on the VIDEO CD, “Press ENTER” in step
4 may appear as “Press H” in the operating
instructions supplied with the disc. In this case, press
ENTER.
17GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the on-screen display
Playing repeatedly
— Repeat Play
Press REPEAT repeatedly during play.
Each time you press the button, the setting
changes cyclically as follows:
• Off: does not play repeatedly.
• Repeat All: repeats all the tracks/files on a
disc.
You can play all the tracks/files or a single track/
file on a disc repeatedly.
• Repeat Track: repeats the current track/file.
Using the front panel display
To cancel Repeat Play
Press REPEAT during play until “REP” or
“REP1” appears.
Select “Off.”
Notes
REP: For all the tracks/files on the disc.
REP1: For a single track/file only.
• You cannot perform Repeat Play during PBC
• Repeat Play is canceled when:
– you turn off the system.
To cancel Repeat Play
Press REPEAT repeatedly until both “REP” and
“REP1” disappear.
– you open the disc tray.
– you switch to other functions except DVD.
– you search for a track/file.
Notes
• You cannot perform Repeat Play during PBC
playback of VIDEO CDs (page 17).
• When you select “REP1,” that track/file is repeated
endlessly until “REP1” is canceled.
18GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operations
Creating your own
program
To
Do this
Cancel Program Play
Press PLAY MODE
repeatedly in stop mode
until “Continue” appears.
— Program Play
Clear a programmed
step
Press M/m/</,
repeatedly to select a step
number, then press CLEAR
in stop mode.
You can make a program of up to 12 steps.
You can synchro record the programmed tracks
The program operation can only be set using the
TV screen.
Clear all the
programmed steps
Press M/m/</,
repeatedly to select “All
Clear,” then press ENTER.
Notes
1
Press DVD (or FUNCTION + or –
repeatedly) to switch the function to
DVD.
• You cannot perform Program Play with DVDs and
VIDEO CDs with PBC function.
• Program Play is canceled when:
– you turn off the system.
2
Press PLAY MODE repeatedly in stop
mode until the Program Display
appears on the TV screen.
– you open the disc tray.
– you switch to other functions except DVD.
Tip
Program Track
The program you made remains after Program Play
finishes. To play the same program again, press H (or
DVD NX on the unit).
1
2
3
4
5
6
7
8
9
10
11
12
All Clear
Play Program
3
4
Press M/m/</, repeatedly to select
the desired step number.
Press the number buttons to select the
track you want to program.
If you make a mistake, press CLEAR to
cancel the number, then select another
number.
Program Track
1 3
4
5
6
7
8
9
10
11
12
2
3
All Clear
Play Program
5
6
To program other tracks, repeat steps 3
and 4.
Press M/m/</, repeatedly to select
“Play Program,” then press H (or DVD
NX on the unit).
Program Play starts.
19GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for a particular
point using the time code
Using the on-screen
display to search
— Time Search
1
Press SEARCH.
The Search Display appears.
You can search for a chapter (DVD) and track
(VIDEO CD, CD). As chapters and tracks are
assigned unique numbers on the disc, so you can
select the desired one by entering its number. Or,
you can search for a particular point using the
time code (Time Search).
2
3
Press M or m repeatedly to select
“Time.”
Press the number buttons to input the
time code, then press ENTER.
When playing a DVD, input the playing
time of the current title.
When playing a VIDEO CD/CD, input the
playing time of the current track.
For example, to find the scene at 2 hours,
10 minutes, and 20 seconds after the
beginning, enter “2:10:20”.
Searching for a chapter
1
Press SEARCH.
The Search Display appears.
2
3
Press M or m repeatedly to select
“Chapter.”
Note
The time search function does not work on a VIDEO
CD (when the PBC function is on).
Press the number buttons to select the
desired chapter number.
If you make a mistake, press CLEAR to
cancel the number, then select another
number.
To cancel searching
Press SEARCH repeatedly until the display
disappears.
4
Press ENTER.
Playback starts from the selected number.
Searching for a track
1
Press SEARCH.
The Search Display appears.
2
3
Press M or m repeatedly to select
“Track.”
Press the number buttons to select the
desired track number.
If you make a mistake, press CLEAR to
cancel the number, then select another
number.
4
Press ENTER.
Playback starts from the selected number.
20GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• For VIDEO CDs and CDs, the setting returns to
“Stereo” when you turn off the system or open the
disc tray.
Disc – Various functions
• During DVD playback, the sound may change
automatically.
Changing the sound/
subtitle/angle
Displaying the audio
information of the disc (DVD
only)
When you press AUDIO, the channels being
played are displayed on the TV screen.
For example, in Dolby Digital format, multiple
signals ranging from monaural to 5.1 channel
signals can be recorded on a DVD. Depending
on the DVD, the number of recorded channels
may differ.
Changing the sound
If a DVD is recorded with multilingual titles or
audio formats, you can select the language or
audio format you want while playing the DVD.
You can also output either the left or right
channel sound from both speakers while playing
a VIDEO CD or CD. Note that this results in
monaural sound.
Current audio format
Press AUDIO repeatedly during play.
2/2 LPCM 2 Ch
Each time you press the button, the setting
changes cyclically as follows:
x When playing a DVD
Depending on the DVD, the choice of the
language and audio format varies.
When the same language is displayed twice or
more times, the DVD is recorded in multiple
audio formats.
The display examples are as
follows:
Format
Display
x When playing a VIDEO CD/CD
PCM (stereo)
• Stereo: The standard stereo sound.
• Left: The sound of the left channel
(monaural).
Dolby Digital 2 ch
Dolby Digital 5.1 ch
DTS
• Right: The sound of the right channel
(monaural).
To preset the desired audio track
You can preset the system to the desired audio
track with the operations described under
MPEG AUDIO
Notes
• When you play a DVD with the audio other than
2 channels, the sound is composed into 2 channels
and output from the system speakers. However,
sound is not output in “Multi Channel PCM” format.
• For discs not recorded in multiple audio format, you
cannot change the sound.
• Depending on the DVD, you may not be able to
change the sound even if the DVD is recorded in
multiple audio format.
continued
21GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the subtitles (DVD
only)
Changing the language
— Language
With DVDs on which multilingual subtitles are
recorded, you can change the subtitle language
while playing a DVD, or turn the subtitles on or
off whenever you want.
1
Press
DISPLAY in stop mode.
The Setup Display appears.
Press SUBTITLE repeatedly during play.
2
3
Press < or , repeatedly to select
“Language,” then press ENTER.
Each time you press the button, the language
changes.
Press M or m repeatedly to select an
item, then press ENTER.
To cancel the subtitle setting
Press SUBTITLE repeatedly to select “Off.”
x OSD (on-screen display)
Note
Switches the display language on the TV
screen. Select the language from the
displayed list.
Depending on the DVD, you may not be able to change
the subtitles even if multilingual subtitles are recorded
on the DVD.
x DVD Menu (DVD only)
Select the language for the DVD menu.
Changing the angles (DVD
only)
x Audio (DVD only)
Switches the language of the sound track.
Select the language from the displayed list.
When playing a DVD on which various angles
(multi-angles) for a scene are recorded, you can
change the viewing angle.
x Subtitle (DVD only)
Switches the language of the subtitle. Select
the language from the displayed list.
If “Auto” is selected, the language specified
as the disc’s default language is
Press ANGLE repeatedly during play.
Each time you press the button, the angle
changes.
Note
automatically selected.
Depending on the DVD, you may not be able to change
the angles even if multi-angles are recorded on the
DVD.
4
5
Press M or m repeatedly to select a
language, then press ENTER.
Press
DISPLAY to turn off the Setup
Display.
Note
When the selected language is not recorded on the
DVD, one of the recorded languages is automatically
selected (except for “OSD”).
Tip
You can reset all the DVD settings except for Parental
Control by performing the operations described under
* Except for Parental Control settings
22GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Depending on the DVD, “4:3 Letter Box” may be
selected automatically instead of “4:3 Pan Scan” or
vice versa.
Adjusting the image and
audio settings
— AV
x VCD Color Sys (Asian and Oceanian
models only)
Select the color system when you play a VIDEO
CD. The default setting is underlined.
1
Press
DISPLAY in stop mode.
Auto
Outputs the video signal in the
system of the disc, either PAL or
NTSC. If your TV uses a dual
system, select “Auto.”
The Setup Display appears.
2
3
4
5
Press < or , repeatedly to select
“AV,” then press ENTER.
NTSC
PAL
Changes the video signal of a PAL
disc and outputs it in the NTSC
system.
Press M or m repeatedly to select an
item, then press ENTER.
Press M or m repeatedly to select a
setting, then press ENTER.
Changes the video signal of an
NTSC disc and outputs it in the
PAL system.
Press
Display.
DISPLAY to turn off the Setup
x Dolby Digital
x TV Type
Set the Dolby Digital settings to enjoy 5.1
channel sound when an optional amplifier is
connected (see “Enjoying the 5.1 channel sound
Select the aspect ratio of the connected TV.
The default setting varies, depending on the
country model.
4:3 Pan Scan Select this when you connect a 4:3
screen TV. This setting displays the
wide picture on the entire screen and
cuts off the portions that do not fit.
x DTS
Set the DTS settings to enjoy 5.1 channel sound
when an optional amplifier is connected (see
4:3 Letter
Box
Select this when you connect a 4:3
screen TV. This setting displays a wide
picture with bands displayed on the
upper and lower portions of the screen.
x Data CD Priority (MP3, JPEG only)
Set priority data you want to play, when you
play the data disc (CD-ROM/CD-R/CD-RW)
contained MP3 audio tracks and JPEG image
files. When you change this setting, eject and
reload the disc.
16:9
Select this when you connect a wide-
screen TV or a TV with a wide mode
function.
• 4:3 Pan Scan
• 4:3 Letter Box
• 16:9
The default setting is underlined.
MP3
If an MP3 file exists on the disc,
the system recognizes the disc as
an MP3 Disc. If only JPEG files
exist on the disc, the system
recognizes the disc as a JPEG
Disc.
JPEG
If a JPEG file exists on the disc,
the system recognizes the disc as a
JPEG Disc. If only MP3 files exist
on the disc, the system recognizes
the disc as an MP3 Disc.
continued
23GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
About DVD software types and
the conversion method
For Asian and Oceanian models, you can change the
color system of this unit according to the connected TV
DVD software can be divided into 2 types: film-
based software and video-based software.
Video-based software is derived from TV, such
as dramas and sit-coms, and displays images at
30 frames/60 fields per second. Film-based
software is derived from film and displays
images at 24 frames per second. Some DVD
software contains both video and film.
In order for these images to appear natural on
your screen when output in progressive format,
the progressive signals need to be converted to
match the type of DVD software that you are
watching.
Tip
You can reset all the DVD settings except for Parental
Control by performing the operations described under
* Except for Rating (Parental Control) settings
To change the type of signal
output from the system
— PROGRESSIVE
Progressive is the method for displaying TV
images which reduces flickering, and sharpens
the image. To display using this method, you
need to connect to a TV that accepts progressive
signals.
Note
When you play video-based software in progressive
signal format, sections of some types of images may
appear unnatural due to the conversion process when
output through the COMPONENT VIDEO OUT jacks.
Even though you set to “PROGRESSIVE,” images
from the VIDEO OUT jack are unaffected as they are
output in the interlace format.
1 Press DVD (or FUNCTION + or –
repeatedly) to switch the function to DVD.
Playback starts automatically if a disc with
auto playback function is loaded. Press x to
stop playback.
2 Press PROGRESSIVE on the unit.
Each time you press PROGRESSIVE on the
unit, the on-screen display changes as
follows:
PROGRESSIVE* y INTERLACE (default
setting)
* “PROGRESSIVE” appears in the front panel
display when the system outputs progressive
signals.
x PROGRESSIVE
Select this setting when your TV accepts
progressive signals and the TV is connected to
the COMPONENT VIDEO OUT jacks.
Normally select this setting under the above
condition.
Note that the picture will not be clear or no
picture will appear if you select these settings
when either of the above conditions is not met.
x INTERLACE (default setting)
Select this setting when your TV does not accept
progressive signals or your TV is connected to
the T LINE-TV jack or VIDEO OUT jack.
24GB
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Enter or re-enter your 4-digit password
using the number buttons, then press
ENTER.
Restricting disc playback
— Rating (Parental Control)
The lock icon is closed and the Parental
Control setting is completed.
If you make a mistake entering your
password, press CLEAR before you press
ENTER and input the correct number.
Limiting playback by children
You can limit the playback of some DVDs
according to a predetermined level such as the
age of the users.
When a limited scene is played back, that scene
is cut or replaced with a preset other scene.
Language
AV
Rating
Reset
Password
Rating
1 G
1
Press
DISPLAY in stop mode.
The Setup Display appears.
2
3
Press < or , repeatedly to select
“Rating,” then press ENTER.
To turn off the Parental Control
function and play the DVD after
entering your password
Press m to select “Rating.”
When a 4-digit password has already been
registered, enter the 4-digit password using
the number buttons, then press ENTER.
You can then select “Rating.”
Enter your 4-digit password using the number
buttons, then press ENTER.
The lock icon is opened and the Parental Control
function is turned off.
To change the password
Language
AV
Rating
Reset
1 In step 6, enter your 4-digit password using
Password
Rating
the number buttons, then press ENTER.
8
2 Enter a new 4-digit password using the
number buttons, then press ENTER.
4
5
Press ENTER repeatedly to select the
level you want.
Each time you press the button, the level
changes.
The lower the value, the more strict the
limitation.
Press M to select “Password.”
continued
25GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the disc for which
Parental Control is set
System setup item list
When you press
settings are displayed.
The default settings are underlined.
DISPLAY, the following
1
Insert the disc and press DVD (or
FUNCTION + or – repeatedly) to switch
the function to DVD.
The Rating Display appears.
Language (page 22)
OSD
Select the language you want to
use from the displayed language
list.
2
Enter your 4-digit password using the
number buttons, then press ENTER.
Playback starts.
DVD Menu
Audio
Select the language you want to
use from the displayed language
list.
Notes
• When you play DVDs which do not have the Parental
Control function, playback cannot be limited on this
system.
Select the language you want to
use from the displayed language
list.
• Depending on the DVD, you may be asked to change
the parental control level while playing the disc. In
this case, enter your password, then change the level.
If the Resume Play mode is canceled, the level
returns to the original level.
Subtitle
Select the language you want to
use from the displayed language
list.
Tip
If you forgot your password, select “Password” and
enter “199703” using the number buttons in the Rating
Display, then press ENTER. You can then enter a new
4-digit password.
1)
TV Type
4:3 Pan Scan
4:3 Letter Box
16:9
2)
VCD Color Sys
Auto
NTSC
PAL
Dolby Digital
DTS
PCM
Bit Stream
PCM
Bit Stream
Data CD Priority
MP3
JPEG
26GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Rating (page 25)
Password
Rating
1 G
2
3 PG
4 PG 13
5
6 R
7 NC 17
8
Reset
YES
NO
1) The default setting varies, depending on the country
model.
2) Asian and Oceanian models only
27GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Press PRESET + or – repeatedly to
select the desired preset number.
Tuner
Press ENTER.
“COMPLETE” appears.
Presetting radio stations
6
Repeat steps 1 through 5 to store other
stations.
You can preset up to 20 FM stations and 10 AM
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
Manual tuning preset
You can manually tune in and store the radio
frequency of the desired stations.
Automatic tuning preset
1
2
3
Press TUNER/BAND repeatedly to
select “FM” or “AM.”
You can automatically tune in all of the stations
that can be received in your area and then store
the radio frequency of the desired stations.
Press TUNING + or – repeatedly to tune
in the desired station.
1
2
Press TUNER/BAND repeatedly to
select “FM” or “AM.”
Press TUNER MEMORY.
A preset number flashes.
Perform steps 4 and 5 while the preset
number flashes.
Press and hold TUNING + or – until the
frequency indication starts to change,
then release it.
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
“TUNED” and “STEREO” (for an FM
stereo program) appear.
4
5
Press PRESET + or – repeatedly to
select the desired preset number.
Press ENTER.
“COMPLETE” appears.
6
Repeat steps 1 through 5 to store other
stations.
Other operations
To
Do this
Tune in a station
Follow the procedure described
If “TUNED” does not appear and the
scanning does not stop
Set another station Start over from step 1. After
to the existing
preset number
step 3, press PRESET + or –
repeatedly to select the preset
number you want to store the
other station.
Set the frequency of the desired radio
station as described in steps 2 through 6 of
3
Press TUNER MEMORY.
A preset number flashes.
Perform steps 4 and 5 while the preset
number flashes.
Preset number
28GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the AM tuning interval
(except for European and
Russian models)
Listening to the radio
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
The AM tuning interval is factory-preset to
9 kHz (or 10 kHz for some areas). To change the
AM tuning interval, tune in any AM station first,
then turn off the system. While holding x on the
unit, press TUNER/BAND on the unit. When
you change the interval, all the AM preset
stations are erased. To reset the interval, repeat
the same procedure.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first
Note
You cannot change the AM tuning interval in Power
1
2
Press TUNER/BAND repeatedly to
select “FM” or “AM.”
Tip
Press PRESET + or – repeatedly to
select the desired preset station.
To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available external
antenna.
Preset number
Frequency
continued
29GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to non-preset radio
station
Using the Radio Data
System (RDS)
— Manual Tuning
(European model only)
1
2
Press TUNER/BAND repeatedly to
select “FM” or “AM.”
What is the Radio Data
System?
Press TUNING + or – repeatedly to tune
in the desired station.
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features like station name. RDS is
available only on FM stations.*
To cut the sound
Press MUTING.
Press MUTING again or VOLUME + to restore
sound.
To listen to an FM stereo program
without stereo effect
Note
RDS may not work properly if the station you are tuned
in is not transmitting the RDS signal properly or if the
signal is weak.
When an FM stereo program has static noise,
press FM MODE repeatedly until “MONO”
appears. There will be no stereo effect, but the
reception will improve.
* Not all FM stations provide RDS service, nor do they
provide the same types of services. If you are not
familiar with the RDS system, check with your local
radio stations for details on RDS services in your
area.
Tips
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
• Press and hold TUNING + or –. The frequency
indication changes and scanning stops when the
system tunes in a station (Automatic Tuning).
• To record the radio programs, use manual recording
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name appears in the display.
To check the RDS information
Each time you press DISPLAY, the display
changes cyclically as follows:
Station name1) t Preset number2) and
frequency t Clock display (for a few seconds)
t Effect status (for a few seconds)
1)
If the RDS broadcast is not properly received, the
station name may not appear in the display.
2)
Preset number is displayed only if you preset radio
30GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape – Play
Tape – Recording
Loading a tape
Recording your favorite
CD tracks on a tape
1
Press Z PUSH OPEN/CLOSE on the
unit.
— CD-TAPE Synchro Recording
2
Load a recorded/recordable tape into
the cassette holder.
You can record a whole CD on a tape.
You can use TYPE I (normal) tape.
1
2
3
Load a recordable tape.
With the side
you want to
play/record
Load a CD you want to record.
facing forward.
Press DVD (or FUNCTION + or –
repeatedly) to switch the function to
DVD.
4
Press CD SYNC on the unit.
The tape deck stands by for recording.
“REC” flashes.
Playing a tape
5
Press z REC PAUSE/START on the
unit.
You can use TYPE I (normal) tape.
Recording starts.
1
2
Load a tape.
Tips
Press TAPE (or FUNCTION + or –
repeatedly) to switch the function to
TAPE.
• If the tape reaches the end of the front side before
completing the recording, the tape stops
automatically and the CD/DVD player enters
Resume Play mode.
3
Press H (or TAPE N on the unit).
• To continue the recording on the reverse side, press
x twice to first cancel the Resume Play, eject and
reload the tape, then perform steps 1 and 2 of “To
(page 31). You can then continue Synchro Recording
from the desired track.
Playback starts.
Other operations
To
Do this
Stop play
Press x.
Fast-forward or Press m or M.
rewind
To perform Synchro Recording
from a desired track
Switch to TAPE Press TAPE N on the unit.
You can select the first track in Synchro
Recording.
function from
another source
Playback starts automatically
when a tape is loaded.
Cut the sound
Remove a tape
Press MUTING.
Press MUTING again or
VOLUME + to restore sound.
1 After performing steps 1 to 4, press . or
> repeatedly to select the desired track
number.
Press Z PUSH OPEN/CLOSE on
the unit in stop mode.
2 Press z REC PAUSE/START on the unit
while the selected track number is flashing.
Recording starts.
continued
31GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To record a CD by specifying
track order
Recording on a tape
manually
You can record only your favorite CD tracks
using Program Play. Between steps 3 and 4,
perform steps 2 to 5 of “Creating your own
— Manual Recording
You can record just the portions you like from a
disc (DVD, VIDEO CD, CD and MP3) or radio
program on a tape.
To stop recording
Press x.
You can also record from connected
components (see “Hooking up optional
Notes
• CD Synchro Recording is not available with DVD,
VIDEO CD, MP3 audio tracks and JPEG image files.
• You cannot listen to other sources while recording.
• If the play mode is set to Repeat Play or Shuffle Play,
it automatically switches to Normal Play in step 4.
• The sound effect automatically switches to “FLAT”
in step 4.
Use buttons on the unit for the operation.
1
2
Load a recordable tape.
Press one of the following buttons to
select the desired source to record.
• DVD NX: To record from this
system’s CD/DVD player. Playback
starts automatically if a disc is loaded.
Press x to stop playback. To cancel
Resume Play, press x twice.
• TUNER/BAND: To record from this
system’s tuner.
• TV: To record from the optional
component connected to TV IN L/R
jacks.
3
4
Press z REC PAUSE/START.
The tape deck stands by for recording.
“REC” flashes.
Press z REC PAUSE/START, then start
playing the desired source to record.
Recording starts.
To stop recording
Press x.
Notes
• You cannot listen to other sources while recording.
• If no sound is being recorded when recording from a
DVD, set “Dolby Digital” or “DTS” to “PCM” under
“AV” in the Setup Display.
• The sound effect automatically switches to “FLAT”
in step 3.
Tip
For recording from the tuner:
If noise is heard while recording from the tuner, move
the respective antenna to reduce the noise.
32GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Singing along
(CMT-SX2D Asian and Oceanian
models only)
Sound Adjustment
Selecting the sound effect
You can sing along with a disc by connecting an
optional microphone.
Press PRESET EQ repeatedly to select the
preset you desire.
The preset name appears in the display.
Adjusting the microphone
To cancel the sound effect
Press PRESET EQ repeatedly until “FLAT”
appears in the display.
Use buttons on the unit for the operation.
1
2
Turn MIC LEVEL to MIN to turn down
the microphone control level.
Sound effect options
EQ
Effect
Connect an optional microphone to the
MIC jack.
ROCK
Bass and treble are greatly boosted.
This gives rock and dance music tracks
even more powerful sound.
3
4
Start playing the music.
Adjust the microphone volume by
turning MIC LEVEL.
JAZZ
Bass and treble are somewhat boosted.
This makes live instrumental
performances such as jazz or other
small ensembles sparkle without losing
the natural tones of the instruments.
After you have finished
Turn MIC LEVEL to MIN and disconnect the
microphone from the MIC jack.
CLASSIC
Unwanted treble is attenuated, letting
you enjoy music with a relaxed feeling.
This mode is suitable for orchestra,
piano solos and other classical music.
To use VIDEO CDs or DVDs
Turn on your TV and switch it to the appropriate
video input.
TV
Treble is greatly boosted. This makes it
easier to hear TV newscasts, drama
dialog and other speech.
Tip
To sing karaoke of multiplex CD, press AUDIO on the
remote repeatedly during play to select “Left” or
MP3
Bass is boosted and treble is greatly
boosted to compensate the high range
that is lost during compression. This
lets you enjoy sound that is closer to
the original.
MOVIE
Expansive, reverberating sounds are
artificially reproduced and the bass is
also boosted. This lets you enjoy
movies with a full sound-space feeling
like being in a movie theater.
continued
33GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Mixing and recording sounds
You can “mix” sounds by playing one of the
components and singing or speaking into a
microphone (not supplied).
The mixed sound can be recorded on a tape.
Use buttons on the unit for the operation.
1
2
3
Prepare the source you want to mix.
Load a recordable tape.
Press the function button of the source
you want to record (e.g., DVD NX).
When you want to record from a disc, press
x twice to cancel Resume Play.
4
5
Press z REC PAUSE/START.
The tape deck stands by for recording.
“REC” flashes.
Press z REC PAUSE/START, and then
start singing, speaking or playing the
desired source.
Recording starts.
To stop recording
Press x.
Tips
• If acoustic feedback (howling) occurs, move the
microphone away from the speakers or change the
direction of the microphone.
• If you want to record your voice through the
microphone only, you can do so by selecting the
DVD function when a disc is loaded and not playing
a disc.
34GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Waking up to music
— Play Timer
Timer
Falling asleep to music
— Sleep Timer
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
You can set the system to turn off after a certain
time, so that you can fall asleep to music.
Use buttons on the remote for the operation.
1
Prepare the sound source you want to
play.
Press SLEEP.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
AUTO* t 90 t 80 t 70 t … t 10 t
OFF
• CD/DVD: Load a disc.
• Tape: Load a tape.
• Tuner: Tune in the preset radio station
2
3
Press CLOCK/TIMER SET.
* The system automatically turns off in 100 minutes or
after the current disc or tape finishes playing.
Press . or > repeatedly to select
“PLAY SET,” then press ENTER.
Other operations
“ON” appears and the hour indication
flashes.
To
Press
Check the
SLEEP once.
4
Set the time to start playing.
remaining time*
Press . or > repeatedly to set the
hour, then press ENTER.
Change the time SLEEP repeatedly to select the
to turn off time you want.
The minute indication flashes.
Press . or > repeatedly to set the
minute, then press ENTER.
Cancel the Sleep SLEEP repeatedly until “SLEEP
Timer Function OFF” appears.
* You cannot check the remaining time if you select
“AUTO.”
5
6
Set the time to stop playing following
the same procedure as step 4.
Note
Do not set to “AUTO” during Synchro Recording on a
tape.
Press . or > repeatedly until the
desired sound source appears.
Tip
Each time you press the button, the display
changes cyclically as follows:
You can use the Sleep Timer, even if you have not set
the clock.
t
y
T
TUNER
DVD PLAY
t
T
TAPE PLAY
7
Press ENTER.
The type of timer (“PLAY TIMER”), the
start time, the stop time, and the sound
source appear in turn, before the original
display returns.
8
9
Press VOLUME + or – to adjust the
volume.
Press ?/1 to turn off the system.
continued
35GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operations
Timer recording radio
programs
To
Do this
Check the setting
1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “PLAY
SEL” appears, then press
ENTER.
— Rec Timer
You can record a preset radio station from a
specified time.
To timer record, you must first preset the radio
station (see “Presetting radio stations”
Change the setting Start over from step 1.
Cancel the timer
1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “TIMER
OFF” appears, then press
ENTER.
Use buttons on the remote for the operation.
1
2
Press CLOCK/TIMER SET.
Press . or > repeatedly to select
“REC SET,” then press ENTER.
Notes
• You cannot activate the Play Timer and Rec Timer at
the same time.
“ON” appears and the hour indication
flashes.
• If you use the Play Timer and the Sleep Timer at the
same time, the setting with the earlier end time has
priority.
3
4
Set the time to start recording.
Press . or > repeatedly to set the
hour, then press ENTER.
• The system turns on 15 seconds before the preset
time. Do not operate the system from the time the
system turns on until the play starts.
The minute indication flashes.
Press . or > repeatedly to set the
minute, then press ENTER.
• If the system is on 15 seconds before the preset time,
the Play Timer will not be activated.
• You cannot use the optional component connected to
TV IN L/R jacks as the sound source for Play Timer.
Set the time to stop recording following
the same procedure as step 3.
The type of timer (“REC TIMER”), the start
time, the stop time, and “TUNER REC”
appear in turn, before the original display
returns.
5
6
Load a recordable tape.
Tune in the preset radio station (see
7
Press ?/1 to turn off the system.
36GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operations
To
Do this
Display
Check the setting
1 Press CLOCK/TIMER
SELECT.
Turning off the display
— Power Saving Mode
2 Press . or >
repeatedly until “REC SEL”
appears, then press ENTER.
Change the setting Start over from step 1.
The clock display can be turned off to minimize
the amount of power consumed during standby
(Power Saving Mode).
Cancel the timer
1 Press CLOCK/TIMER
SELECT.
2 Press . or >
repeatedly until “TIMER
OFF” appears, then press
ENTER.
Press DISPLAY repeatedly while the
system is off until the clock display
disappears.
To cancel Power Saving Mode
Notes
Press DISPLAY while the system is off. Each
time you press the button, the display switches
as follows:
Clock display* y No display (Power Saving
Mode)
• You cannot activate the Play Timer and Rec Timer at
the same time.
• If you use the Rec Timer and the Sleep Timer at the
same time, the setting with the earlier end time has
priority.
* The clock is displayed only if you set the clock.
• The system turns on 15 seconds before the preset
time. Do not operate the system from the time the
system turns on until the play starts.
Tips
• The timer continues to operate in Power Saving
Mode.
• If the system is on 15 seconds before the preset time,
the Rec Timer will not be activated.
• ?/1 indicator lights up even in Power Saving Mode.
• The volume is reduced to minimum during
recording.
• Note that if the Rec Timer is set at the same time as
the Play Timer sound source is set to tape, the Rec
Timer sound may be recorded onto the tape.
Adjusting the brightness
of the indicators
Press DIMMER repeatedly.
Each time you press the button, the setting
changes cyclically as follows:
DIMMER OFF t DIMMER 1 t
DIMMER 2*
* DIMMER 2 is the darkest.
37GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x When you press DISPLAY in stop mode
Viewing information
about the disc in the
display
Total title/track number of the disc and total
playing time of the current disc3) t Clock
display (for a few seconds) t Effect status (for
a few seconds)
1)
These are not displayed during Shuffle Play or
Program Play.
You can check the playing time and remaining
time of the current track or that of the disc.
2)
May not appear with still images.
3)
VIDEO CDs and CDs only
Checking the disc information
(DVD/VIDEO CD/CD/MP3/
JPEG)
Press DISPLAY.
Each time you press the button, the display
changes cyclically as follows:
x When playing a DVD
Elapsed playing time of the current title t
Remaining time of the current chapter t
Remaining time of the current title t Clock
display (for a few seconds) t Effect status (for
a few seconds)
x When playing a CD/VIDEO CD without
PBC function
Elapsed playing time of the current track t
Remaining time of the current track t
Remaining time of the disc1) t Clock display
(for a few seconds) t Effect status (for a few
seconds)
x When playing a VIDEO CD with PBC
functions (Ver. 2.0)
Elapsed playing time on the current track2) t
Clock display (for a few seconds) t Effect
status (for a few seconds)
x When playing an MP3
Elapsed playing time of the current track t
Clock display (for a few seconds) t Effect
status (for a few seconds)
x When playing a JPEG
Current file number t Clock display (for a few
seconds) t Effect status (for a few seconds)
38GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing information
about the disc in the
on-screen display
Viewing the tuner
information in the display
Press DISPLAY while listening to the radio.
Each time you press the button, the display
changes cyclically as follows:
You can check the playing time and remaining
time of the current title, chapter or track.
1)
2)
Station name t Preset number and
frequency t Clock display (for a few seconds)
t Effect status (for a few seconds)
Press DISPLAY.
Each time you press the button, the display
changes cyclically as follows:
1) European model only
2) Preset number is displayed only if you preset radio
x When playing a DVD
Elapsed playing time of the current title t
Remaining time of the current chapter t
Remaining time of the current title
x When playing a VIDEO CD
Elapsed playing time of the current track t
Remaining time of the current track* t
Remaining time of the current disc*
x When playing a CD
Elapsed playing time of the current track t
Remaining time of the current track t
Remaining time of the current disc
x When playing an MP3
Elapsed playing time of the current track
x When playing a JPEG
Current file number and total number of files
* When playing a VIDEO CD without PBC function
To turn off the display
Press DISPLAY repeatedly until the display
disappears.
39GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Number
9
TV’s input source
COMPONENT 1 INPUT
COMPONENT 2 INPUT
Optional Components
CLEAR
PRESET EQ COMPONENT 3 INPUT
ENTER COMPONENT 4 INPUT
Controlling the TV with the
remote
2
Press and hold TV CH + while entering
the code for transmit time (see the
table below) using the number buttons.
You can use the following buttons on the remote
to operate a Sony TV.
The transmit time from the remote is
selected.
To
Press
Turn the TV on or off TV ?/1 while holding
down the TV button
Number
Transmit time
Switch the TV’s input TV/VIDEO while holding
source between the TV down the TV button
and other input sources
1
2
3
4
5
6
7
8
0.5 (Default)
1
1.5
2
Change the TV channels TV CH +/– or the number
buttonswhile holding down
the TV button
2.5
3
Adjust the volume of
the TV speaker(s)
TV VOL +/– while holding
down the TV button
3.5
4
Notes
Using the THEATRE SYNC
function
• This function is only for SONY TV series, however,
some TV products may also not work.
• If this function does not work, change the transmit
time. The transmit time varies depending on the TV.
• If distance between the TV and this system is too far,
this function may not work. Install the system near
the TV.
THEATRE SYNC allows you to turn on your
SONY TV and this system, change the system
mode to “DVD,” and then switch the TV’s input
source you set with one button push.
• Keep the remote pointed in the direction of the TV
and this system.
Use the remote for the operation.
• For European and Russian models, if the T LINE-
TV jack and COMPONENT VIDEO OUT jacks are
both connected to a TV, pressing the THEATRE
SYNC button may not switch the TV’s input source,
depending on the TV.
1
Press and hold TV/VIDEO while
entering the code for the TV’s input
source connected to this system (see
the table below) using the number
buttons.
TV’s input source is selected.
Number
TV’s input source
No input source (Default)
VIDEO1
0
1
2
3
4
5
6
7
8
VIDEO2
VIDEO3
VIDEO4
VIDEO5
VIDEO6
VIDEO7
VIDEO8
40GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking up optional components
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component. North American model is used for illustration purpose.
TV or VCR, etc.
Amplifier or MD deck
From the audio output jack
of the connected
component
To the digital input jack of
the digital component
• You cannot make a digital recording of a copy
guarded disc using a digital component connected to
this system. Also, playback may not be possible
depending on the connected component.
A DIGITAL OUT (OPTICAL) jack
Use a digital optical cord (square, not supplied)
to connect an amplifier, MD deck or DAT deck
with a digital optical input jack. Sound is then
output when the system function is set to DVD.
By connecting this system to the optical input
jack of the optional amplifier equipped with
Dolby Digital or DTS decoder, you can enjoy
the 5.1 channel sound.
• When you connect a component that does not support
Dolby Digital or DTS to the DIGITAL OUT
(OPTICAL) jack and output a Dolby Digital or DTS
bit stream, noise may be heard from the connected
component.
B TV IN L/R jacks
In addition, when the CD or DVD audio is linear
PCM, you can make a digital recording from this
system to an MD deck or DAT deck.
Use audio cords (not supplied) to connect an
optional analog component (TV or VCR, etc.) to
these jacks. You can then record or listen to from
the component through this system.
Notes
• When playing MP3 audio tracks, you cannot output
digital audio.
• You can record digital audio from this system only
when DVD function is selected.
41GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to audio from a
connected component
Enjoying the 5.1 channel
sound with the optional
amplifier
Use buttons on the unit for the operation.
1
Connect audio cords.
1
Connect a digital optical cord.
2
Turn the VOLUME control towards – to
turn down the volume.
2
Connect 6 speakers to an AV amplifier
equipped with a decoder.
For the speaker placement, refer to the
operating instructions supplied with the
connected amplifier.
3
4
Press TV to switch the function to TV.
Start playing the connected
component.
3
Press
DISPLAY in stop mode.
5
Turn the VOLUME control to adjust the
volume.
The Setup Display appears.
4
5
Press < or , repeatedly to select
“AV,” then press ENTER.
Press M or m repeatedly to select
“Dolby Digital” or “DTS,” then press
ENTER.
6
7
8
Press M or m repeatedly to select “Bit
Stream,” then press ENTER.
Press
DISPLAY to turn off the Setup
Display.
Switch the output to 5.1 channel Dolby
Digital sound or 5.1 channel DTS
sound.
42GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording audio from a
connected component
Recording on a connected
component
1
Connect audio cords.
1
Connect a digital optical cord.
2
Start recording manually.
2
Press DVD (or FUNCTION + or –
repeatedly) to switch the function to
DVD.
Playback starts automatically if a disc with
auto playback function is loaded. Press xto
stop playback. To cancel Resume Play,
press x twice.
3
4
Start recording with the connected
digital component (MD deck, etc.).
Refer to the operating instructions provided
with the connected component.
Press H (or DVD NX on the unit) to
start playing.
Notes
• You cannot make a digital recording in the following
cases.
– Copy guarded DVDs
– DVD Dolby Digital or DTS bit stream output
– CD-Rs/CD-RWs recorded in music CD format
• You cannot make a recording when “Dolby Digital”
or “DTS” under “AV” is set to “Bit Stream.”
43GB
Download from Www.Somanuals.com. All Manuals Search And Download.
General
“– –:– –” appears in the display.
• A power interruption has occurred. Set the clock
again.
Troubleshooting
Problems and remedies
The clock setting/radio presetting/timer is
canceled.
• Redo the following:
Should you encounter a problem with your
system, do the following:
1 Make sure the power cord and speaker
cords are correctly and firmly connected.
2 Find your problem in the troubleshooting
checklist below and take the indicated
corrective action.
If the problem persists after doing all of the
above, consult your nearest Sony dealer.
Note that if service personnel changes some
parts during repair, these parts may be retained.
There is no sound.
• Press VOLUME +.
• Make sure the headphones are not connected.
• There is no audio output during Rec Timer.
• The system is in pause mode or in slow-motion
play mode. Press H (or DVD NX on the unit)
to return to Normal Play.
When the ?/1 indicator flashes
Immediately unplug the power cord and
check the following items.
• Set “Dolby Digital” or “DTS” under “AV” to
“PCM.”
• If your system has a voltage selector, is the
voltage selector set to the correct voltage?
Check the voltage for your region, then
make sure the voltage selector is set
correctly.
There is severe hum or noise.
• Move the system away from the source of noise.
• Connect the system to a different wall outlet.
• Install a noise filter (commercially available) to
the power cord.
• Are the + and – speaker cords short-
circuited?
The timer cannot be set.
• Are you using the supplied speakers?
• Is anything blocking the ventilation holes
on the rear of the system?
Check all the above items and fix any
problems found. After ?/1 indicator stops
flashing, reconnect the power cord and turn
on the system. If the indicator still flashes, or
if the cause of the problem cannot be found
even after checking all the above items,
consult your nearest Sony dealer.
The timer does not function.
• Check the timer setting and set the correct time
The remote does not function.
• Remove the obstacle.
• Move the remote closer to the system.
• Point the remote at the system’s sensor.
• Replace the batteries (R6/size AA).
• Locate the system away from the fluorescent light.
There is acoustic feedback.
• Reduce the volume.
• Move the microphone away from the speakers or
change the direction of the microphone (CMT-
SX2D Asian and Oceanian models only).
44GB
Download from Www.Somanuals.com. All Manuals Search And Download.
The color irregularity on a TV screen persists.
• Turn off the TV set once, then turn it on after 15
to 30 minutes. If the color irregularity still
persists, place the speakers farther away from the
TV set.
The sound skips.
• Replace the disc.
• Try moving the system to a place without
vibration (e.g., on top of a stable stand).
• Try moving the speakers away from the system, or
placing them on separate stands. When you listen
to a track with bass sounds at high volume, the
speaker vibration may cause the sound to skip.
Speakers
Sound comes from one channel or
unbalanced left and right volume.
• Check the speaker connection and speaker
placement.
Play does not start from the first track.
• Press PLAY MODE repeatedly until both “PGM”
and “SHUF” disappear to return to Normal Play.
• Resume Play has been selected. Press x in stop
• The source being played back is monaural.
Sound lacks bass.
• Check that the speaker’s + and – jacks are
connected correctly.
• The title, DVD or PBC menu automatically
appears on the TV screen.
Playback starts automatically.
• The DVD features an auto playback function.
DVD/VIDEO CD/CD/MP3/JPEG
player
Playback stops automatically.
• Some discs may contain an auto pause signal.
While playing such a disc, the playback stops at
the auto pause signal.
The disc tray does not open and “LOCKED”
appears.
You cannot perform some functions such as
Stop, Search, Slow-motion Play, Repeat Play,
Shuffle Play or Program Play.
• Depending on the disc, you may not be able to do
some of the operations above. Refer to the
• Contact your Sony dealer or local authorized Sony
service facility.
The disc tray does not close.
• Place the disc correctly.
• Always close the tray by pressing Z on the unit.
Trying to press the tray closed with your fingers
may cause problems with the player.
operating instructions supplied with the disc.
MP3 audio track cannot be played back.
• Recording was not performed according to the
ISO9660 Level 1 or Level 2 format, or Joliet in the
expansion format.
The disc does not eject.
• You cannot eject the disc during CD Synchro
Recording. Press x to cancel the CD Synchro
Recording, then press Z on the unit to eject the
disc.
• The MP3 audio track does not have the extension
“.MP3”.
• The data is not stored in MP3 format.
• Discs containing files other than MPEG1 Audio
Layer-3 files cannot be played.
• Consult your nearest Sony dealer.
Play does not start.
• Set “Data CD Priority” under “AV” to “MP3”
• Open the disc tray and check whether a disc is
loaded.
• Playback is possible up to 16 levels.
• The album contains more than 999 MP3 audio
tracks.
• Replace the disc.
• Place the disc that this system can play (page 6).
• Place the disc correctly.
MP3 audio tracks take longer to play back than
others.
• After the system reads all tracks on the discs,
playback may take more time than usual if:
– the number of albums or tracks on the disc is
very large.
• Place the disc in the tray with the label side up.
• Remove the disc and wipe away the moisture on
the disc, then leave the system turned on for a few
hours until the moisture evaporates.
• Press H (or DVD NX on the unit) to start play.
• The region code on the DVD does not match the
system.
– the album and track organization structure is
very complex.
continued
45GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• For European and Russian models, when
connecting your TV and the T LINE-TV jack of
this system using a SCART cable (not supplied),
make sure that the VIDEO OUT SELECTOR is
set to EURO AV (RGB signals are not output
when the VIDEO OUT SELECTOR is set to
COMPONENT). Also in this case set the system
your TV and the COMPONENT VIDEO OUT
jack of this system using a component cable (not
supplied), make sure the VIDEO OUT
The JPEG image file cannot be played.
• The data CD is not recorded in JPEG format that
conforms to ISO9660 Level 1/Level 2 or Joliet.
• The JPEG image file does not have the extension
“.JPG” or “.JPEG”.
• The data is not formatted in JPEG even though it
has the extension “.JPG” or “.JPEG”.
• Set “Data CD Priority” under “AV” to “JPEG”
• Playback is possible up to 16 levels.
• The album contains more than 999 JPEG image
files.
SELECTOR is set to COMPONENT.
• For European and Russian models, turn off the
system when switching the VIDEO OUT
SELECTOR. The setting does not change while
the system is on.
The sound loses stereo effect when you play a
VIDEO CD or CD.
• Press AUDIO repeatedly during playback to
select “Stereo” (see “Changing the sound”
• Except for European and Russian models, when
connecting your TV and the VIDEO OUT jack of
this system using the video cable (supplied), set
• You have set progressive format but your TV
cannot accept the signal in progressive format. In
this case, return the setting to interlace format
• Make sure the system is connected appropriately.
The recording was not done properly when
making a digital recording from the CD/DVD
player of this system to an optional
component connected to the DIGITAL OUT
(OPTICAL) jack.
• Audio data is output from the DIGITAL OUT
(OPTICAL) jack without any sound processing,
so that the audio data is output slightly ahead of
the sound from the speakers. Therefore, start the
optional component recording in advance when
making a digital recording to a connected optional
component (MD deck, etc.).
• Even if your TV is compatible with progressive
format (525p/625p) signals, the image may be
affected when you set progressive format. In this
case, return the setting to interlace format (default
Picture noise appears.
• Clean the disc.
• When you play a VIDEO CD, the color system is
different. Set the color system to match your TV
(page 23) (Asian and Oceanian models only).
Picture
The aspect ratio of the screen cannot be
changed even though you set “TV Type”
under “AV” in the Setup Display when you
play a wide picture.
• The aspect ratio is fixed on your DVD.
• Depending on the TV, you may not change the
aspect ratio.
There is no picture.
• Press H (or DVD NX on the unit).
• Check that the system is connected securely.
• The video cable is damaged. Replace it with a new
one.
• Make sure you connect the system to the video
Messages do not appear on the screen in the
language you want.
• Make sure you turn on the TV and operate the TV
correctly.
• Select the language you want for the on-screen
display in “OSD” under “Language” in the Setup
• Make sure you select the video input on the TV so
that you can view the pictures from the system.
• When you play a VIDEO CD, make sure you set
the color system correctly, according to your TV
(color) system (Asian and Oceanian models only).
• Make sure you connect the system and your TV
using the video/SCART cable so that you can
view the pictures.
The language for the sound track cannot be
changed.
• Multilingual tracks are not recorded on the DVD
being played.
• The DVD prohibits changing the language for the
sound track.
46GB
Download from Www.Somanuals.com. All Manuals Search And Download.
The subtitle language cannot be changed.
• Multilingual subtitles are not recorded on the
DVD being played.
Noise increases or the high frequencies are
erased.
• The record/playback heads are magnetized.
• The DVD prohibits changing the subtitles.
The tape does not record.
• No cassette is loaded. Load a cassette.
• The tab has been removed from the cassette.
Cover the broken tab with adhesive tape
The subtitle cannot be turned off.
• The DVD prohibits turning off subtitles.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD being
played.
• The tape has wound to the end.
• Set “Dolby Digital” or “DTS” under “AV” to
“PCM.”
• The DVD prohibits changing the angles.
“TAPE ERR” appears in the display.
• Press ?/1 to turn off the system and remove any
tapes from the cassette holder. Then disconnect
the power cord and reconnect it. Then press ?/1
to turn on the system.
Tuner
Severe hum or noise/stations cannot be
received. (“TUNED” or “STEREO” flashes in
the display)
• Find a place and an orientation that provide good
reception, then set up the antenna again. If you
cannot obtain good reception, we recommend you
connect a commercially available external
antenna.
If “TAPE ERR” still appears, consult your nearest
Sony dealer.
Optional components
There is no sound.
(page 44) and check the condition of the system.
checking:
• The supplied FM lead antenna receives signals
along its entire length, so make sure you extend it
fully.
• Locate the antennas as far away from the speaker
cords as possible.
– if the cords are connected properly.
– if the cord plugs are firmly inserted all the way.
• Turn on the connected component.
• Refer to the operating instructions supplied with
the connected component and start playing.
• Consult your nearest Sony dealer if the supplied
AM antenna has come off the plastic stand.
• Try turning off surrounding electrical equipment.
A stereo FM program cannot be received in
stereo.
• Press FM MODE repeatedly until “MONO”
disappears.
Tape deck
The tape does not record or play, or there is a
decrease in sound level.
• The record/playback heads are magnetized.
The tape does not erase completely.
• The record/playback heads are magnetized.
There is excessive wow or flutter, or the sound
drops out.
• The capstans or pinch rollers are dirty. Clean them
continued
47GB
Download from Www.Somanuals.com. All Manuals Search And Download.
If the system still does not
operate properly after performing
the above measures, reset the
system as follows:
Messages
One of the following messages may appear or
flash in the display during operation.
Use buttons on the unit for the operation.
1 Remove the disc if it is loaded.
2 Disconnect the power cord.
3 Reconnect the power cord.
4 Press ?/1 to turn on the system.
DVD/VIDEO CD/CD/MP3/JPEG
CAN’T PLAY
• A disc that cannot be played was inserted.
• A disc with an unsupported Region code was
inserted.
5 Press DVD NX to switch the function to
DVD and make sure that “NO DISC” is
displayed.
NO DISC
There is no disc in the unit.
NOT IN USE
6 Press x, PLAY MODE and DVD NX at the
You pressed an invalid button.
same time.
The system is reset to the factory settings except
for DVD settings. You should set the settings
you made, such as the preset stations, clock, and
timer.
Tape
NO TAB
You cannot record the tape because the tab has been
removed from the cassette.
To return the DVD setup to the
default settings*, perform reset
as follows:
NO TAPE
There is no tape in the tape deck.
TAPE ERR
A malfunction of the tape deck has occurred.
The operation can only be set using the TV
screen.
1 Press
DISPLAY in stop mode.
2 Press < or , repeatedly to select “Reset,”
then press ENTER.
3 Press < or , repeatedly to select “YES,”
then press ENTER.
It takes a few seconds to complete. Do not
press ?/1 when resetting the system.
* Except for Rating (Parental Control) settings
48GB
Download from Www.Somanuals.com. All Manuals Search And Download.
In case color irregularity is observed
on nearby a TV screen
With the magnetically shielded type of speaker system,
the speakers can be installed near a TV set. However,
color irregularity may still be observed on the TV
screen depending on the type of your TV set.
Additional Information
Precautions
On operating voltage
If color irregularity is observed…
Turn off the TV set once, then turn it on after 15 to 30
minutes.
Before operating the system, check that the operating
voltage of your system is identical with the voltage of
your local power supply.
If color irregularity is observed
again…
Place the speakers farther away from the TV set.
On safety
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the unit itself has been turned off.
• Unplug the system from the wall outlet (mains) if it
is not to be used for an extended period of time. To
disconnect the power cord (mains lead), pull it out by
the plug. Never pull the cord itself.
IMPORTANT NOTICE
Caution: This system is capable of holding a still
video image or on-screen display image on your
television screen indefinitely. If you leave the still
video image or on-screen display image displayed
on your TV for an extended period of time you risk
permanent damage to your television screen.
Projection televisions are especially susceptible to
this.
• Should any solid object or liquid fall into the system,
unplug the system and have it checked by qualified
personnel before operating it any further.
• AC power cord must be changed only at the qualified
service shop.
On operation
On placement
• If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens inside the CD/
DVD player. Should this occur, the system will not
operate properly. Remove the disc and leave the
system turned on for about an hour until the moisture
evaporates.
• Do not place the system in an inclined position.
• Do not place the system in locations where it is;
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Subject to vibrations
– Subject to direct sunlight.
• When you move the system, take out any disc.
• Use caution when placing the unit or speakers on
surfaces that have been specially treated (with wax,
oil, polish, etc.) as staining or discoloration of the
surface may result.
If you have any questions or problems concerning your
system, please consult your nearest Sony dealer.
On heat buildup
• Although the system heats up during operation, this
is not a malfunction.
• Place the system in a location with adequate
ventilation to prevent heat buildup in the system.
• If you continuously use this system at a high volume,
the cabinet temperature of the top, side and bottom
rises considerably. To avoid burning yourself, do not
touch the cabinet.
• To prevent a malfunction, do not cover the
ventilation hole for the cooling fan.
continued
49GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on discs
• Before playing, clean the disc with a cleaning cloth.
When using a tape longer than
90 minutes
Wipe the disc from the center out.
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding
frequently. The tape may get entangled in the tape
deck.
• Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray
intended for vinyl LPs.
• Do not expose the disc to direct sunlight or heat
sources such as hot air ducts, nor leave it in a car
parked in direct sunlight.
Cleaning the tape heads
Clean the tape heads after every 10 hours of use. Be
sure to clean the tape heads before you start an
important recording or after playing an old tape. Use a
separately sold dry-type or wet-type cleaning cassette.
For details, refer to the instructions of the cleaning
cassette.
• Do not use discs encircled with a protection ring.
This may cause a malfunction to the system.
• When using discs that have glue or similar tacky
substance on the label side of the disc or that used a
special ink when the label was printed, there is a
chance that the disc or label may become attached to
parts inside this unit. When this occurs, it may not be
possible to remove the disc, and may also cause this
unit to malfunction. Be sure to check that the label
side of the disc is not sticky before using.
The following types of disc should not be used:
– Rental or used discs with attached seals where the
glue extends beyond the seal. The perimeter of the
seal on the disc is tacky.
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape after every 20 to 30 hours of
use with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
cassette.
– Discs that have labels printed using a special ink
that feels tacky when touched.
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with mild detergent solution. Do not
use any type of abrasive pad, scouring powder or
solvent such as thinner, benzine or alcohol.
To save a tape permanently
To prevent a tape from being accidentally recorded
over, break off the cassette tab from side A or B as
illustrated.
Break off the
cassette tab
If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape.
Before placing a cassette in the tape
deck
Take up any slack in the tape. Otherwise, the tape may
get entangled in the parts of the tape deck and become
damaged.
50GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other models:
CMT-DX2D/SX2D
Specifications
The following measured at AC 120 V, 240 V, 50/60 Hz
DIN power output (rated): 40 + 40 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
50 + 50 watts
Amplifier section
AUDIO POWER SPECIFICATIONS
(CMT-DX2D USA model only)
(6 ohms at 1 kHz, 10%
THD)
CMT-DX2D
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
Inputs
TV IN (phono jacks):
voltage 1 V,
impedance 47 kilohms
MIC (phone jack) (CMT-SX2D Asian and Oceanian
With 6 ohm loads, both channels driven, from
120 – 10,000 Hz: rated 50 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
models only):
sensitivity 1 mV,
impedance 10 kilohms
Outputs
VIDEO OUT (phono jack) (except for European and
Russian models):
max. output level
North American model:
CMT-DX2D
1 Vp-p, unbalanced, Sync
negative, load impedance
75 ohms
Continuous RMS power output (reference):
50 + 50 watts (6 ohms at
1 kHz, 10% THD)
Total harmonic distortion less than 0.07% (6 ohms at
1 kHz, 25 W)
LINE-TV (European and Russian models only):
max. output level 1 Vp-p,
unbalanced, Sync
negative, load impedance
75 ohms
COMPONENT VIDEO OUT:
Y: 1 Vp-p, 75 ohms
PB, PR: 0.7 Vp-p, 75 ohms
DIGITAL OUT (OPTICAL) (Square optical connector
jack, rear panel)
European and Russian models:
CMT-DX2D
DIN power output (rated): 40 + 40 watts (6 ohms at
1 kHz, DIN)
Continuous RMS power output (reference):
50 + 50 watts (6 ohms at
Wavelength
PHONES (stereo mini jack):
accepts headphones of
660 nm
1 kHz, 10% THD)
Music power output (reference):
100 + 100 watts (6 ohms at
1 kHz, 10% THD)
8 ohms or more
accepts impedance of
6 ohms
SPEAKER:
Korean and Thai models:
CMT-DX2D/SX2D
Disc player section
System
Compact disc and digital
audio and video system
Semiconductor laser
(DVD: λ=650 nm,
The following measured at AC 220 V, 60 Hz
DIN power output (rated): 35 + 35 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference):
45 + 45 watts
Laser
CD: λ=790 nm)
Emission duration:
continuous
(6 ohms at 1 kHz, 10%
THD)
Frequency response
DVD (PCM 48 kHz):
2 Hz – 22 kHz ( 1 dB)
CD: 2 Hz – 20 kHz ( 1 dB)
Video color system format
Pan-American models:
NTSC
European and Russian
models: PAL
Other models: NTSC, PAL
continued
51GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape deck section
Speaker
Recording system
Frequency response
4-track 2-channel stereo
40 – 13,000 Hz,
Speaker system
2-way, bass-reflex type,
magnetically shielded type
using Sony TYPE I
cassette
0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
0.2% W.Peak (DIN)
Speaker units
Woofer:
Tweeter:
Nominal impedance
Dimensions (w/h/d)
12 cm, cone type
4 cm, cone type
6 ohms
Approx. 170 × 250 ×
220 mm
Wow and flutter
Tuner section
FM stereo, FM/AM superheterodyne tuner
Mass
Approx. 3.0 kg net per
speaker
FM tuner section
Tuning range
General
Power requirements
87.5 – 108.0 MHz
(50 kHz step)
Antenna
FM lead antenna
75 ohms unbalanced
10.7 MHz
North American model: 120 V AC, 60 Hz
European and Russian models:
230 V AC, 50/60 Hz
Antenna terminals
Intermediate frequency
AM tuner section
Tuning range
Australian model:
Korean model:
Thai model:
Taiwan model:
Other models:
230 – 240 V AC, 50/60 Hz
220 V AC, 60 Hz
220 V AC, 50/60 Hz
120 V AC, 50/60 Hz
110 – 120 V, 220 – 240 V
AC, 50/60 Hz
Pan-American models:
530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 – 1,710 kHz
(with the tuning interval
set at 9 kHz)
Adjustable with voltage
selector
European and Russian models:
531 – 1,602 kHz
Power consumption
North American model: 110 watts
European and Russian models:
110 watts
(with the tuning interval
set at 9 kHz)
Other models:
530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
0.3 watts (in Power Saving
Mode)
Australian, Korean and Thai models:
110 watts
120 watts
Dimensions (w/h/d) (excl. speakers)
Other models:
Antenna
Antenna terminals
Intermediate frequency
AM loop antenna
External antenna terminal
450 kHz
Pan-American, European, Russian, Australian and
Korean models:
Other models:
Approx. 190 × 250 ×
301 mm
Approx. 190 × 250 ×
310 mm
Mass (excl. speakers)
Supplied accessories:
Approx. 5.9 kg
Remote Commander (1)
R6 (size AA) batteries (2)
AM loop antenna (1)
FM lead antenna (1)
Video cable (1) (except for
European and Russian
models)
Speaker pads (8)
Design and specifications are subject to change
without notice.
52GB
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD
A disc that contains up to 8 hours of moving
pictures even though its diameter is the same as
a CD.
Glossary
Album
The data capacity of a single-layer and single-
sided DVD, at 4.7 GB (Giga Byte), is 7 times
that of a CD. Furthermore, the data capacity of a
dual-layer and single-sided DVD is 8.5 GB, a
single-layer and double-sided DVD 9.4 GB, and
a dual-layer and double-sided DVD 17 GB.
The picture data uses the MPEG 2 format, one of
the worldwide standards of digital compression
technology. The picture data is compressed to
about 1/40 of its original size. The DVD also
uses the variable rate coding technology that
changes the data to be allocated according to the
status of the picture.
Section of a music piece on a data CD
containing MP3 audio tracks or JPEG image
files.
Auto Pause
An automatical pauses according to the signal
encoded on the disc while playing a VIDEO CD.
If the CD/DVD player does not resume play for
a long time, press H (or DVD NX on the
unit) to resume play manually.
Chapter
Sections of a picture or a music piece on a DVD
that are smaller than titles. A title is composed of
several chapters. Each chapter is assigned a
chapter number enabling you to locate the
chapter you want.
The audio data is recorded in Dolby Digital as
well as in PCM, allowing you to enjoy more
realistic audio presence.
Furthermore, various advanced functions such
as the multi-angle, multilingual, and Parental
Control functions are provided with the DVD.
Dolby Digital
This sound format for movie theaters is more
advanced than Dolby Surround Pro Logic. In
this format, the surround speakers output stereo
sound with an expanded frequency range and a
subwoofer channel for deep bass is
independently provided. This format is also
called “5.1” because the subwoofer channel is
counted as 0.1 channel (since it functions only
when a deep bass effect is needed). All six
channels in this format are recorded separately
to realize superior channel separation.
DVD-RW
A DVD-RW is a recordable and rewritable disc
that is the same size as a DVD VIDEO. The
DVD-RW has two different modes: VR mode
and Video mode. DVD-RWs created in Video
mode have the same format as a DVD VIDEO,
while discs created in VR (Video Recording)
mode allow the contents to be programmed or
edited.
Furthermore, since all the signals are processed
digitally, less signal degradation occurs.
DVD+RW
A DVD+RW (plus RW) is a recordable and
rewritable disc. DVD+RWs use a recording
format that is comparable to the DVD VIDEO
format.
DTS
Digital audio compression technology that the
Digital Theater Systems, Inc. developed. This
technology conforms to 5.1-channel surround.
The surround channel is stereo and there is
discrete sub woofer channel in this format. DTS
provides the same 5.1 discrete channels of high
quality digital audio. The good channel
separation is realized because the all channel
data is recorded discrete and processed in
digital.
File
Section of a picture on a data CD containing
JPEG image files.
Film based software, Video based
software
DVDs can be classified as Film based or Video
based software. Film based DVDs contain the
same images (24 frames per second) that are
shown at movie theaters. Video based DVDs,
such as television dramas or sit-coms, displays
images at 30 frames (or 60 fields) per second.
continued
53GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Index (CD) / Video Index (VIDEO CD)
A number that divides a track into sections to
easily locate the point you want on a VIDEO CD
or a CD. Depending on the disc, no indexes may
be recorded.
Playback Control (PBC)
Signals encoded on VIDEO CDs (Version 2.0)
to control playback. By using menu screens
recorded on VIDEO CDs with PBC functions,
you can enjoy playing simple interactive
programs, programs with search functions, and
so on.
This system conforms to Ver. 1.1 and Ver. 2.0 of
VIDEO CD standards. You can enjoy two kinds
of playback depending on the disc type.
Interlace format
(Interlaced scanning)
Interlace format shows every other line of an
image as a single “field” and is the standard
method for displaying images on television. The
even number field shows the even numbered
lines of an image, and the odd numbered field
shows the odd numbered lines of an image.
VIDEO CDs without PBC functions
(Ver. 1.1 discs)
Enjoy video playback (moving pictures) as well
as music.
Menu Playback
Playback using the menu screens recorded on
VIDEO CDs with PBC functions. You can enjoy
simple interactive software using the menu
playback function.
VIDEO CDs with PBC functions
(Ver. 2.0 discs)
Play interactive software using menu screens
displayed on the TV screen (PBC Playback), in
addition to the video playback functions of Ver.
1.1 discs. Moreover, you can play high-
resolution still pictures, if they are included on
the disc.
Multi-angle function
Various angles, or viewpoints of the video
camera, for a scene are recorded on some DVDs.
Multilingual function
Several languages for the sound or subtitles in a
picture are recorded on some DVDs.
Progressive format
(sequential scanning)
In contrast to the Interlace format, the
Multi Session
progressive format can reproduce 50 to 60
frames per second by reproducing all scanning
lines (525 lines for the NTSC system, 625 lines
for the PAL system). The overall picture quality
increases and still images, text, and horizontal
lines appear sharper. This format is compatible
with the 525 or 625 progressive format.
This is a recording method that enables adding
of data using the Track-At-Once method.
Conventional CDs begin at a CD control area
called the Lead-in and end at an area called
Lead-out. A Multi Session CD is a CD having
multiple sessions, with each segment from
Lead-in to Lead-out regarded as a single session.
CD-Extra: This format records audio (audio CD
data) on the tracks in session 1 and data on the
tracks in session 2.
Region Code
This system is used to protect copyrights. A
region number is allocated on each DVD system
or DVD disc according to the sales region. Each
region code is shown on the system as well as on
the disc packaging. The system can play the
discs that match its region code. The system can
ALL
Parental Control
A function of the DVD to limit playback of the
disc by the age of the users according to the
limitation level in each country/region. The
limitation varies from disc to disc; when it is
activated, playback is completely prohibited,
violent scenes are skipped or replaced with other
scenes and so on.
also play discs with the “
” mark. Even when
the region code is not shown on the DVD, the
region limit may still be activated.
54GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Title
The longest sections of a picture or a music
piece on a DVD; a movie, etc., for a picture
piece on video software; or an album, etc., for a
music piece on audio software. Each title is
assigned a title number enabling you to locate
the title you want.
Track
Sections of a picture or a music piece on a CD,
VIDEO CD, MP3 or JPEG. Each track is
assigned a track number enabling you to locate
the track you want.
Disc
DVD
Title
structure
Chapter
Track
Index
Album
Track
Album
File
Disc
Disc
Disc
VIDEO CD
or CD
structure
MP3
structure
JPEG
structure
VIDEO CD
A compact disc that contains moving pictures.
The picture data uses the MPEG 1 format, one of
the worldwide standards for digital compression
technology. The picture data is compressed to
about 1/140 of its original size. Consequently, a
12 cm VIDEO CD can contain up to 74 minutes
of moving pictures.
VIDEO CDs also contain compact audio data.
Sounds outside the range of human hearing are
compressed while the sounds we can hear are
not compressed. VIDEO CDs can hold 6 times
the audio information of conventional audio
CDs.
There are 2 versions of VIDEO CDs.
• Version 1.1: You can play only moving
pictures and sounds.
• Version 2.0: You can play high-resolution
still pictures and enjoy PBC functions.
This system conforms to both versions.
55GB
Download from Www.Somanuals.com. All Manuals Search And Download.
List of button locations and reference pages
Illustration number
How to use this page
r
Use this page to find the location of buttons and other
parts of the system that are mentioned in the text.
R
R
Name of button/part Reference page
Main unit
BUTTON DESCRIPTIONS
ALPHABETICAL ORDER
A – O
P – Z
Display window 3
PHONES jack qk
Remote sensor 4
z REC PAUSE/START (record)
m/M (rewind/fast forward)
./> (go back/forward) qs
Z PUSH OPEN/CLOSE (eject)
* CMT-SX2D Asian and
Oceanian models only
56GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
ALPHABETICAL ORDER
BUTTON DESCRIPTIONS
A – O
P – Z
35)
CLOCK/TIMER SELECT w;
36)
-/-- ef
* The H, number 5 and
VOLUME + (TV VOL +)
buttons have tactile dots. Use
the tactile dots as references
when operating the system.
57GB
Download from Www.Somanuals.com. All Manuals Search And Download.
58GB
Download from Www.Somanuals.com. All Manuals Search And Download.
59GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|