| 	
		 4-193-857-31(1)   
					English   
					Stereo headphones   
					Features   
					Operating Instructions   
					Large 50 mm driver unit reproduces a wide frequency range, broader dynamic range   
					and accurate sound   
					 
					Manual de instrucciones   
					Stereo   
					Headphones   
					360 kJ/m3 high power neodymium magnets are used to reproduce clear mid-range   
					sounds and wealthy low range sounds   
					 
					Resists high power input up to 2,000 mW   
					 
					 
					Noise isolation earpad with pressure-relieving urethane cushion for a good attenuation   
					of ambient noise and a comfortable fit   
					Single-sided cord   
					 
					How to use   
					MDR-ZX700   
					How to wear the headphones (see fig. )   
					Extend the slider to adjust the length.   
					Wear the headphone marked  on your right ear, and the one marked  on your left   
					ear.   
					There is a tactile dot on the unit marked  to distinguish the left side.   
					©2010 Sony Corporation Printed in Thailand   
					How to connect the headphones (see fig. )   
					These headphones are for use with a stereo mini jack.   
					 
					Specifications   
					Type: Closed, dynamic (circum-aural) / Driver unit: 50 mm, dome type (OFC Voice   
					Coil) / Power handling capacity: 2,000 mW (IEC*) / Impedance: 24 Ω at 1 kHz /   
					Sensitivity: 106 dB/mW / Frequency response: 5 – 40,000 Hz / Cord : 1.2 m (47 1/4 in),   
					Single-sided OFC Litz cord / Plug : Gold-plated stereo mini plug / Mass: Approx. 260 g   
					(9.17 oz) without cord / Supplied accessory : Operating Instructions (1)   
					Tactile dot   
					* IEC = International Electrotechnical Commission   
					Design and specifications are subject to change without notice.   
					Precautions   
					Listening with headphones at high volume may affect your hearing. For traffic safety,   
					do not use while driving or cycling.   
					 
					Do not subject the headphones to excessive shock.   
					 
					 
					 
					 
					 
					Handle the driver units carefully.   
					The earpads may deteriorate due to long-term storage or use.   
					Do not leave the jack plug dirty otherwise the sound may be distorted.   
					Clean the headphones with a soft dry cloth. Do not blow on the units when cleaning.   
					Do not allow the plug to become dirty, otherwise the sound may deteriorate.   
					Do not leave the stereo headphones in a location subject to direct sunlight, heat or   
					moisture.   
					 
					 
					This mark is valid only in those European countries where it is legally   
					applicable.   
					Stereo mini plug   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 |