4-180-179-11(1)
Setting Up
LCD
Watching TV
Digital Colour TV
Operating Instructions
Additional Information
KDL-52NX803 / 46NX703 / 40NX803 / 40NX703
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Digital TV
Notice for Wireless Signal
1. Hereby, Sony, declares that this unit is
in compliance with the essential
requirements and other relevant provisions
of Directive 1999/5/EC.
function
NOTICE FOR
CUSTOMERS IN
THE UNITED
KINGDOM
A moulded plug complying with BS1363 is
fitted to this equipment for your safety and
convenience.
Should the fuse in the plug supplied need to
be replaced with the same rating of fuse
approved by ASTA or BSI to BS 1362 (i.e.,
• Any functions related to Digital TV
(
) will only work in countries or
areas where DVB-T (MPEG-2 and
H.264/MPEG-4 AVC) digital terrestrial
signals are broadcast or where you have
access to a compatible DVB-C (MPEG-
2 and H.264/MPEG-4 AVC) cable
service. Please confirm with your local
dealer if you can receive a DVB-T signal
where you live or ask your cable
provider if their DVB-C cable service is
suitable for integrated operation with
this TV.
• Your cable provider may charge a fee for
their services, or require you to agree to
its terms and conditions of business.
• This TV set complies with DVB-T and
DVB-C specifications, but compatibility
with future DVB-T digital terrestrial and
DVB-C digital cable broadcasts are not
guaranteed.
To obtain the declaration of conformity
(DoC) for R&TTE Directive, please access
the following URL address.
2. TV wireless system can only be used in
the following countries:
Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia,
Liechtenstein, Lithuania, Luxembourg,
Malta, The Netherlands, Norway, Poland,
Portugal, Slovak Republic, Romania,
Slovenia, Spain, Sweden, Switzerland,
Turkey, and The United Kingdom.
marked with
or ) must be used.
When an alternative type of plug is used it
should be fitted with the same rating of
fuse, otherwise the circuit should be
protected by a 10 AMP FUSE at the
distribution board.
If the plug supplied with this equipment has
a detachable fuse cover, be sure to attach
the fuse cover after you change the fuse.
Never use the plug without the fuse cover.
If you should lose the fuse cover, please
contact your nearest Sony service station.
• Some Digital TV functions may not be
available in some countries/areas and
DVB-C cable may not operate correctly
with some providers.
TV Wireless System -
Regulation Information
For a list of compatible cable providers,
refer to the support web site:
For Customers in Italy
s
with respect to private use, by the
Legislative Decree of 1.8.2003,
no. 259 (“Code of Electronic
DVBC/
Communications”). In particular
Article 104 indicates when the prior
obtainment of a general authorization is
required and Art. 105 indicates when
free use is permitted;
with respect to the supply to the public
of the RLAN access to telecom
networks and services (e.g. TV
wireless system), by the Ministerial
Decree 28.5.2003, as amended, and
Art. 25 (general authorization for
electronic communications networks
and services) of the Code of electronic
communications
~
• Instructions about “Installing Wall
Mount Bracket” are included within this
TV’s instructions manual.
• The illustrations used in this manual are
of the KDL-40NX803 series unless
otherwise state.
FUSE
s
Trademark information
is a registered trademark of the DVB
Project.
HDMI, the HDMI logo and High-
Definition Multimedia Interface are
trademarks or registered trademarks of
HDMI Licensing LLC.
s
with respect to private use, by the
Ministerial Decree 12.07.2007
FUSE
For Customers in Norway
DLNA and DLNA CERTIFIED are
trademarks and/or service marks of Digital
Living Network Alliance.
Use of this radio equipment is not allowed
in the geographical area within a radius of
20 km from the centre of Ny-Ålesund,
Svalbard.
How to replace the fuse
Open the fuse compartment with a blade
screwdriver, and replace the fuse.
Please refer to the illustration that actually
equipped with the product.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
For Customers in Cyprus
Introduction
Thank you for choosing this Sony product.
Before operating the TV, please read this
manual thoroughly and retain it for future
reference.
“BRAVIA” and
are
The end user must register the RLAN (or
WAS or WiFi) devices in the Department
of Electronic Communications (P.I. 6/
2006 and P.I. 6A/2006).
trademarks of Sony Corporation.
“XMB™” and “XrossMediaBar” are
trademarks of Sony Corporation and Sony
Computer Entertainment Inc.
P.I. 6/2006 is the Radiocommunications
(Categories of Stations Subject to General
Authorization and Registration) Order of
2006.
The manufacturer of this product is
Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075 Japan.
The Authorized Representative for
EMC and product safety is Sony
Deutschland GmbH, Hedelfinger
Strasse 61, 70327 Stuttgart,
P.I. 6A/2006 is the General Authorization
for the use of Radiofrequencies by Radio
Local area Networks and by Wireless
Access Systems, including Radio Local
Area Networks (WAS/RLAN)
Germany. For any service or
guarantee matters please refer to the
addresses given in separate service
or guarantee documents.
For Customers in France
The WLAN (WiFi) feature of this LCD
Digital Colour TV shall exclusively be
used inside buildings. Any use of the
WLAN (WiFi) feature of this LCD Digital
Colour TV outside of the buildings is
prohibited on the French territory. Please
make sure that the WLAN (WiFi) feature
of this LCD Digital Colour TV is disabled
before any use outside of the buildings.
(ART Decision 2002-1009 as amended by
ART Decision 03-908, relating to radio-
frequencies use restrictions).
2GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Checking the accessories..............................................................................................................3
Connecting an antenna (aerial)/Set Top Box/recorder (e.g. DVD recorder)..................................5
Troubleshooting ...........................................................................................................................10
Specifications...............................................................................................................................11
TV installation dimensions table ..................................................................................................14
Safety Information........................................................................................................................15
Precautions..................................................................................................................................16
• Operating instructions are built into your BRAVIA TV. Refer to “To use i-Manual” for operation (page 9).
• Before operating the TV, please read “Safety Information” (page 15). Retain this manual for future reference.
Checking the accessories
Inserting batteries into the
remote
AC power cord (mains lead) (1)
Cable holder (1)
Remote (1)
Size AAA batteries (R3 type) (2)
Black spacers (4)
(KDL-52/40NX803 only)
Stand rear cover (1)
Bottom cover (1)
(KDL-52/40NX803 only)
Table-Top Stand (1)*
Fixing screws for stand (M5 × 16) (4)
Assembling screws for stand (M5 × 16) (4)
(KDL-40NX803 and KDL-40NX703 only)
* Disassembled except for KDL-52NX803 and
KDL-46NX703.
Slide the cover to open.
Refer to the supplied Table-Top Stand leaflet to
assemble the stand.
3GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
Adjusting the viewing angle of
the TV
This TV can be adjusted within the angles
shown below.
Attaching the Table-Top
Stand
1 Refer to the supplied Table-Top Stand
leaflet for proper attachment for some
TV models.
0º
6º
2 Place the TV set on the Table-Top
Stand.
3 Fix the TV to the Table-Top Stand
according to the arrow marks that
guide the screw holes using the
supplied screws.
1
4
Remove screw as
shown.
Install screw into
the top screw hole
of the Table-Top
Stand.
~
• If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m {15 kgf·cm}.
2
3
4 After all the screws are tightened,
attach the supplied stand rear cover to
the Table-Top Stand.
Lift up and tilt.
Slide in.
~
• To return to 0°, reverse the above procedure.
4GB
Download from Www.Somanuals.com. All Manuals Search And Download.
~
• For KDL-52/40NX803, after connecting cables,
install the bottom cover and stand rear cover.
Connecting an antenna
(aerial)/Set Top Box/
recorder (e.g. DVD recorder)
Connecting a Set Top Box/recorder
(e.g. DVD recorder) with SCART
Preventing the TV from
toppling over
Set Top Box/recorder (e.g. DVD recorder)
~
• Right Angle Type Universal SCART Lead is
recommended for this connection.
Connecting a Set Top Box/recorder
(e.g. DVD recorder) with HDMI
1 Install a wood screw (4 mm in
diameter, not supplied) in the TV stand.
2 Install a machine screw (M4 × 16, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine
screw with a strong cord (not supplied).
Set Top Box/recorder (e.g. DVD recorder)
5GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Bundling the cables
Performing the initial set-up
KDL-52/
40NX803
*KDL-52/40NX803 only
KDL-46/
40NX703
*
1 Connect the TV to your AC power
outlet (mains socket).
2 Check the ENERGY SAVING
SWITCH setting is on (z).
~
3 Press 1 on the TV.
• Do not bundle the AC power cord (mains lead)
together with other cables.
When you switch on the TV for the first
time, the Language menu appears on the
screen.
4
Follow the instructions on the screen.
Digital Auto Tuning: When you select
“Cable”, we recommend that you select
“Quick Scan” for quick tuning. Set
“Frequency” and “Network ID” according
to the information supplied from your cable
provider. If no channel is found using
“Quick Scan”, try “Full Scan” (though it
may take some time).
For a list of compatible cable providers,
refer to the support web site:
DVBC/
6GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme Sorting: Changes the order of
analogue channels stored in the TV.
1 Press F/f to select the channel you want
to move to a new position, then press
.
2 Press F/f to select the new position for
the channel, then press
.
~
• You can also tune channels manually.
Detaching the Table-Top
Stand from the TV
~
• Remove the screws guided by the arrow marks
of the TV.
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
7GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
To watch programmes
Turn on the TV.
1
1 Switch ENERGY SAVING SWITCH
2
on (z).
2 Press 1 on the TV to turn on the TV.
GUIDE
Select a mode.
2
3
OPTIONS
HOME
Select a TV channel.
3
Using Digital Electronic Programme
Guide
Press GUIDE in digital mode to display the
programme guide.
z
• The number 5, N, PROG + and AUDIO
buttons on the remote have a tactile dot.
Use the tactile dots as a reference when
operating the TV.
To utilise the TV’s features
HOME button
OPTIONS button
Press to display various operation and setting
screens.
Press to display convenient functions based on
the current input or content.
Picture
Sound
BRAVIA ENGINE
3
PRO
Add to Favourites
Lock/Unlock
PAP
Settings
System Settings
Motionflow
Sleep Timer
Headphone Volume
Speaker
System Information
TV
8GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To use i-Manual
Operating instructions are built into your BRAVIA
TV and can be displayed on the screen.
You can browse your i-Manual anytime you need
to find the varieties of convenient functions.
Press i-MANUAL.
1
1
2
Press G/g/F/f/ to select items.
2
x Welcome to i-Manual
x “BRAVIA” TV Features
x Watching TV
x Fun Features with Connected
Equipment
Introduces how to connect optional equipment.
x Parts Description
Introduces convenient features such as EPG
Guide, Favourites, etc.
x Troubleshooting
Find solutions for your problem.
x Using the HOME Menu
Customise your TV settings, etc.
~
x Index
• Images and illustrations may differ from what is displayed on the screen.
9GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Troubleshooting
Check whether the 1 (standby) indicator is flashing in red.
When the 1 (standby) indicator is flashing
The self-diagnosis function is activated.
1 Count how many times the 1 (standby) indicator flashes between each three second
break.
For example, the indicator may flash three times, go off for three seconds, then flash again three
times.
2 Press 1 on the TV to turn it off, disconnect the AC power cord (mains lead), and inform
your dealer or Sony service centre of how the indicator flashes (number of flashes).
When the 1 (standby) indicator is not flashing
1 Check the items in the tables below. (Also refer to “Troubleshooting” in the i-Manual.)
2 If the problem persists, have your TV serviced by qualified service personnel.
Condition
Explanation/Solution
Picture
There is no picture (screen • Check the antenna (aerial)/cable connection.
• Connect the TV to the AC power (mains), and press 1 on the TV.
• If the 1 (standby) indicator lights up in red, press TV "/1.
is dark) and no sound.
Tiny black points and/or
bright points appear on the
screen.
• The screen is composed of pixels. Tiny black points and/or bright
points (pixels) on the screen do not indicate a malfunction.
General
The TV’s power cannot be • Check if ENERGY SAVING SWITCH is on (z).
turned on.
The TV turns off
automatically (the TV
enters standby mode).
• Check if the “Sleep Timer” is activated, or confirm the
“Duration” setting of “On Timer”.
• Check if the “Idle TV Standby” is activated.
The remote does not
function.
• Replace the batteries.
• Your TV may be in SYNC mode.
Press SYNC MENU, select “TV Control” and then select “Home
(Menu)” or “Options” to control the TV.
The “Parental Lock”
password has been
forgotten.
• Enter 9999 for the PIN code. (PIN code 9999 is always accepted.)
The TV surrounds become • When the TV is used for an extended period, the TV surrounds
become warm.
warm.
You may feel hot when touching there by the hand.
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
LCD (Liquid Crystal Display) Panel
Panel system
TV system
Analogue: Depending on your country/area selection: B/G/H, D/K, L, I
Digital: DVB-T2/DVB-T/DVB-C
Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input)
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Colour/video system
Channel coverage
Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41
D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69
Digital: VHF/UHF
10 W + 10 W
Sound output
Input/Output jacks
Aerial/Antenna cable
75 ohm external terminal for VHF/UHF
21-pin scart connector (CENELEC standard) including audio/video input, RGB input and TV audio/video
output.
/
AV1
Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio input (phono jacks)
COMPONENT IN
COMPONENT IN
HDMI IN1, 2, 3, 4
Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Analogue audio input (minijack) (HDMI IN2 only)
PC Input
Video input (phono jack)
AV2
Digital optical jack (Two channel linear PCM, Dolby Digital)
DIGITAL AUDIO OUT
(OPTICAL)
PC Input (Mini D-sub 15-pin)
PC audio input (minijack)
PC IN
USB port
Headphones jack
i
CAM (Conditional Access Module) slot
10BASE-T/100BASE-TX connector (Depending on the operating environment of the network,
connection speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality
are not guaranteed for this TV.)
LAN
* For LAN connections, use a Category 7 10BASE-T/100BASE-TX cable (not supplied).
Model name KDL-
Power and others
Power requirements
52NX803
46NX703
40NX803
40NX703
220 V – 240 V AC, 50 Hz
52 inches/
Approx. 132.2 cm
46 inches/
Approx. 116.8 cm
40 inches/Approx. 101.6 cm
Screen size (measured
diagonally)
1,920 dots (horizontal) × 1,080 lines (vertical)
Display resolution
125 W
96 W
104 W
133 W
81 W
Power
in “Home”/
consumption “Standard”
mode
169 W
129 W
109 W
in “Shop”/
“Vivid” mode
0.23 W (18 W when “Quick Start” is set to “On”)
183 kWh 140 kWh
0.2 W (18 W when “Quick Start” is set to “On”)
Standby power
consumption*
1
152 kWh
118 kWh
Average annual energy
2
consumption*
Dimensions (Approx.) (w × h × d)
126.1 × 81.9 × 40.0 cm 112.7 × 74.8 × 32.0 cm 99.4 × 66.9 × 29.0 cm
99.4 × 67.3 × 29.0 cm
99.4 × 64.1 × 6.4 cm
with Table-Top Stand
without Table-Top Stand
Mass (Approx.)
126.1 × 78.7 × 6.4 cm
112.7 × 71.6 × 6.4 cm
99.4 × 63.5 × 6.4 cm
36.1 kg
30.1 kg
27.8 kg
24.0 kg
23.8 kg
20.1 kg
22.6 kg
19.2 kg
with Table-Top Stand
without Table-Top Stand
Supplied accessories
(Continued) 11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Model name KDL-
52NX803
46NX703
40NX803
40NX703
Wall-Mount Bracket: SU-WL700
TV stand: SU-52NX1 (KDL-52NX803)
SU-46NX1 (KDL-46NX703)
Optional accessories
SU-40NX1 (KDL-40NX803/40NX703)
1
* Specified standby power is reached after the TV finishes necessary internal processes.
2
* 4 hours a days and 365 days a year
~
• To save power consumption
– when you reduce backlight setting (the brightness of the screen), the power consumption reduce.
– the “Eco” settings (e.g. “Power Saving”, “Idle TV Standby” ) help you to reduce the power consumption and
thus save money by reducing electricity bills.
– when you switch off the TV using the ENERGY SAVING SWITCH (only certain models), power
consumption will be almost zero.
Design and specifications are subject to change without notice.
12GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Accessories (Wall-Mount Bracket)
To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Your TV can be installed using the SU-WL700 Wall-Mount Bracket (sold separately).
•
Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the
installation.
•
~
• Remove the bottom cover and terminal cover when installing on a wall (KDL-52/40NX803 only).
• Be sure to use the black spacers supplied with the TV when installing on a wall (KDL-52/40NX803 only).
Sufficient expertise is required for installing this product, especially to determine the strength of
the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the
wall to Sony dealers or licensed contractors and pay adequate attention to safety during the
installation. Sony is not liable for any damage or injury caused by mishandling or improper
installation.
4 Detach the Table-Top Stand from the
Precautions
TV, if necessary. (4-1)
Be sure to install the Wall-Mount Bracket securely
• Remove the bottom cover and terminal
to the wall following the instructions in this as well
cover first before detaching the Table-
as the manual provided with the Wall-Mount
Top Stand (KDL-52/40NX803 only).
Bracket. The numbers given in the parentheses
indicate the installation steps described in the
instruction manual provided with Wall-Mount
Bracket.
1 Check the parts supplied with the Wall-
Mount Bracket (1).
Refer to the instruction manual provided
with the Wall-Mount Bracket.
2 Decide on the installation location.
(2-1)
from the TV” (page 7) for details.
5 Connect the supplied AC power cord
Refer to the following “TV installation
dimensions table”. Allow for suitable
clearance between the TV, the ceiling and
protruding parts of the wall as instructed.
(mains lead). (5-1)
3 Install the Base Bracket on the wall.
(2-2 through 3)
Decide the positions of the screw on the
wall and install the Base Bracket. Refer to
the instruction manual provided with the
Wall-Mount Bracket for details.
~
• Do not attach the bottom cover.
(Continued) 13GB
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Place the spacers (KDL-52/40NX803
7 Attach the Mounting Bracket and the
Lock Bracket. (4-3 through 4-7)
Refer to the instruction manual provided
with the Wall-Mount Bracket.
only).
1 Remove the four screws, and be
sure to store them in a safe place,
keeping them away from children.
8 Prepare the paper template. (5-2)
1. Refer to the following “TV installation
dimensions table” and mark the TV outline
on the template.
2. Tape the template to the wall as
instructed in the manual provided with the
Wall-Mount Bracket.
Follow the instruction manual provided
with the Wall-Mount Bracket to complete
the installation. (5-3 through 6)
2 Place the four
spacers (supplied).
~
• When attaching the Table-Top Stand again, be
sure to fasten the four screws (previously
removed) to the original holes on the rear of
the TV (KDL-52/40NX803 only).
TV installation dimensions table
Screen centre point
Unit: cm
Length for each mounting angle
Display
dimensions
Screencentre
dimension
Model Name
KDL-
Angle (0°)
Angle (20°)
A
B
C
1.3
5.2
8.9
8.9
D
E
7.5
7.5
7.5
7.5
F
38.9
36.2
33.7
33.7
G
74.5
67.9
60.2
60.8
H
48.8
49.3
48.8
49.3
126.1
112.7
99.4
78.7
71.6
63.5
64.1
42.1
42.7
42.1
42.7
52NX803
46NX703
40NX803
40NX703
99.4
Figures in the above table may differ slightly depending on the installation.
WARNING
The wall that the TV will be installed on should be capable of supporting a weight of at least four
14GB
Download from Www.Somanuals.com. All Manuals Search And Download.
–
Unplug the mains plug and clean it
regularly. If the plug is covered with
dust and it picks up moisture, its
insulation may deteriorate, which
could result in a fire.
Ventilation
• Never cover the ventilation holes or
Safety
insert anything in the cabinet.
• Leave space around the TV set as shown
below.
Information
• It is strongly recommended that you use
a Sony wall-mount bracket in order to
provide adequate air-circulation.
Notes
• Do not use the supplied mains lead on
Installation/Set-up
any other equipment.
Install and use the TV set in accordance
with the instructions below in order to
avoid any risk of fire, electrical shock or
damage and/or injuries.
Installed on the wall
• Do not pinch, bend, or twist the mains
lead excessively. The core conductors
may be exposed or broken.
• Do not modify the mains lead.
• Do not put anything heavy on the mains
lead.
• Do not pull on the mains lead itself when
disconnecting the mains lead.
• Do not connect too many appliances to
the same mains socket.
• Do not use a poor fitting mains socket.
30 cm
10 cm
10 cm
Installation
• The TV set should be installed near an
easily accessible mains socket.
• Place the TV set on a stable, level
surface.
10 cm
• Only qualified service personnel should
carry out wall installations.
• For safety reasons, it is strongly
recommended that you use Sony
accessories, including:
Leave at least this space around
the set.
Prohibited Usage
Do not install/use the TV set in locations,
environments or situations such as those
listed below, or the TV set may
malfunction and cause a fire, electrical
shock, damage and/or injuries.
Installed with stand
–
–
Wall-mount bracket SU-WL700
TV stand:
SU-52NX1 (KDL-52NX803)
SU-46NX1 (KDL-46NX703)
SU-40NX1 (KDL-40NX803/
40NX703)
30 cm
10 cm
10 cm
6 cm
Location:
• Be sure to use the screws supplied with
the Wall-mount bracket when attaching
the mounting hooks to the TV set. The
supplied screws are designed so that they
are 8 mm to 12 mm in length when
measured from the attaching surface of
the mounting hook.
The diameter and length of the screws
differ depending on the Wall-mount
bracket model.
Outdoors (in direct sunlight), at the
seashore, on a ship or other vessel, inside a
vehicle, in medical institutions, unstable
locations, near water, rain, moisture or
smoke.
Leave at least this space around
the set.
• To ensure proper ventilation and prevent
the collection of dirt or dust:
–
Do not lay the TV set flat, install
upside down, backwards, or
sideways.
Do not place the TV set on a shelf,
rug, bed or in a closet.
Do not cover the TV set with a cloth,
such as curtains, or items such as
newspapers, etc.
Do not install the TV set as shown
below.
Environment:
Places that are hot, humid, or excessively
dusty; where insects may enter; where it
might be exposed to mechanical vibration,
near flammable objects (candles, etc). The
TV set shall not be exposed to dripping or
splashing and no objects filled with
liquids, such as vases, shall be placed on
the TV.
–
–
Use of screws other than those supplied
may result in internal damage to the TV
set or cause it to fall, etc.
8 mm - 12 mm
–
Situation:
Screw (supplied with the
Wall-mount bracket)
Air circulation is blocked.
Do not use when your hands are wet, with
the cabinet removed, or with attachments
not recommended by the manufacturer.
Disconnect the TV set from mains socket
and aerial during lightning storms.
Mounting Hook
Hook attachment on rear
of TV set
Wall
Wall
Transporting
Broken pieces:
• Before
• Do not throw anything at the TV set. The
screen glass may break by the impact
and cause serious injury.
transporting the
TV set, disconnect
all cables.
• Two or three
people are needed
to transport a large
TV set.
• When transporting
the TV set by
hand, hold it as
shown on the
right. Do not put
stress on the LCD
panel and the
frame around the
screen.
• When lifting or moving the TV set, hold
it firmly from the bottom.
• When transporting the TV set, do not
subject it to jolts or excessive vibration.
• When transporting the TV set for repairs
or when moving, pack it using the
original carton and packing material.
• If the surface of the TV set cracks, do
not touch it until you have unplugged the
mains lead. Otherwise electric shock
may result.
Mains lead
Handle the mains lead and socket as
follows in order to avoid any risk of fire,
electrical shock or damage and/or injuries:
When not in use
• If you will not be using the TV set for
several days, the TV set should be
disconnected from the mains for
environmental and safety reasons.
• As the TV set is not disconnected from
the mains when the TV set is just turned
off, pull the plug from the mains to
disconnect the TV set completely.
• However, some TV sets may have
features that require the TV set to be left
in standby to work correctly.
–
–
–
–
Use only mains leads supplied by
Sony, not other suppliers.
Insert the plug fully into the mains
socket.
Operate the TV set on a 220-240 V AC
supply only.
When wiring cables, be sure to unplug
the mains lead for your safety and take
care not to catch your feet on the
cables.
Disconnect the mains lead from the
mains socket before working on or
moving the TV set.
Keep the mains lead away from heat
sources.
–
–
(Continued) 15GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling and cleaning the
screen surface/cabinet of
the TV set
Be sure to unplug the mains lead
connected to the TV set from mains socket
before cleaning.
Union and other European
countries with separate
collection systems)
This symbol on the product or on its
packaging indicates that this product shall
not be treated as household waste. Instead
it shall be handed over to the applicable
collection point for the recycling of
electrical and electronic equipment. By
ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the
For children
• Do not allow children to climb on the
TV set.
• Keep small accessories out of the reach
of children, so that they are not
mistakenly swallowed.
To avoid material degradation or screen
coating degradation, observe the following
precautions.
If the following problems
occur...
Turn off the TV set and unplug the mains
lead immediately if any of the following
problems occur.
• To remove dust from the screen surface/
cabinet, wipe gently with a soft cloth. If
dust is persistent, wipe with a soft cloth
slightly moistened with a diluted mild
detergent solution.
• Do not spray water or detergent directly
on the TV set. It may drip to the bottom
of the screen or exterior parts, and may
cause a malfunction.
• Never use any type of abrasive pad,
alkaline/acid cleaner, scouring powder,
or volatile solvent, such as alcohol,
benzene, thinner or insecticide. Using
such materials or maintaining prolonged
contact with rubber or vinyl materials
may result in damage to the screen
surface and cabinet material.
• Periodic vacuuming of the ventilation
openings is recommended to ensure to
proper ventilation.
• When adjusting the angle of the TV set,
move it slowly so as to prevent the TV
set from moving or slipping off from its
table stand.
environment and human health, which
could otherwise be caused by
Ask your dealer or Sony service centre to
have it checked by qualified service
personnel.
inappropriate waste handling of this
product. The recycling of materials will
help to conserve natural resources. For
more detailed information about recycling
of this product, please contact your local
Civic Office, your household waste
disposal service or the shop where you
purchased the product.
When:
–
–
–
Mains lead is damaged.
Poor fitting of mains socket.
TV set is damaged by being dropped,
hit or having something thrown at it.
Any liquid or solid object falls through
openings in the cabinet.
–
Disposal of
waste batteries
(applicable in the
European Union
and other
Warning
To prevent the spread of fire, keep candles
or other open flames away from this
product at all time.
European
countries with separate
collection systems)
Optional Equipment
• Keep optional components or any
equipment emitting electromagnetic
radiation away from the TV set.
Otherwise picture distortion and/or noisy
sound may occur.
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not be
treated as household waste. On certain
batteries this symbol might be used in
combination with a chemical symbol. The
chemical symbols for mercury (Hg) or
lead (Pb) are added if the battery contains
more than 0.0005% mercury or 0.004%
lead. By ensuring these batteries are
disposed of correctly, you will help
prevent potentially negative consequences
for the environment and human health
which could otherwise be caused by
inappropriate waste handling of the
battery. The recycling of the materials will
help to conserve natural resources. In case
of products that for safety, performance or
data integrity reasons require a permanent
connection with an incorporated battery,
this battery should be replaced by qualified
service staff only. To ensure that the
battery will be treated properly, hand over
the product at end-of-life to the applicable
collection point for the recycling of
electrical and electronic equipment. For all
other batteries, please view the section on
how to remove the battery from the
product safely. Hand the battery over to
the applicable collection point for the
recycling of waste batteries. For more
detailed information about recycling of
this product or battery, please contact your
local Civic Office, your household waste
disposal service or the shop where you
purchased the product.
• This equipment has been tested and
found to comply with the limits set out in
the EMC Directive using a connection
signal cable shorter than 3 meters.
Precautions
Viewing the TV
• View the TV in moderate light, as
viewing the TV in poor light or during
long period of time, strains your eyes.
• When using headphones, adjust the
volume so as to avoid excessive levels,
as hearing damage may result.
Batteries
• Observe the correct polarity when
inserting batteries.
• Do not use different types of batteries
together or mix old and new batteries.
• Dispose of batteries in an
environmentally friendly way. Certain
regions may regulate the disposal of
batteries. Please consult your local
authority.
• Handle the remote with care. Do not
drop or step on it, or spill liquid of any
kind onto it.
LCD Screen
• Although the LCD screen is made with
high-precision technology and 99.99%
or more of the pixels are effective, black
dots may appear or bright points of light
(red, blue, or green) may appear
constantly on the LCD screen. This is a
structural property of the LCD screen
and is not a malfunction.
• Do not push or scratch the front filter, or
place objects on top of this TV set. The
image may be uneven or the LCD screen
may be damaged.
• If this TV set is used in a cold place, a
smear may occur in the picture or the
picture may become dark. This does not
indicate a failure. These phenomena
disappear as the temperature rises.
• Ghosting may occur when still pictures
are displayed continuously. It may
disappear after a few moments.
• Do not place the remote in a location
near a heat source, a place subject to
direct sunlight, or a damp room.
Wireless Function of the
unit
• Do not operate this unit near medical
equipment (pacemaker, etc.), as
malfunction of the medical equipment
may result.
• Although this unit transmits/receives
scrambled signals, be careful of
unauthorised interception. We cannot be
responsible for any trouble as a result.
• The screen and cabinet get warm when
this TV set is in use. This is not a
malfunction.
Disposal of the TV set
• The LCD screen contains a small
amount of liquid crystal. Some
fluorescent tubes used in this TV set also
contain mercury. Follow your local
ordinances and regulations for disposal.
Disposal of Old
Electrical &
Electronic
Equipment
(Applicable in
the European
16GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep this Instruction
manual safe you’ll
need it
Television in the UK is going digital, bringing us all more.
Please see overleaf to find out when your area switches to digital.
Digital UK is the independent, non-profit organisation leading the process of digital TV switchover
in the UK. Digital UK provides impartial information on what people need to do to prepare for the
move to digital, and when they need to do it.
How the switchover affects your TV equipment:
Your new TV has a digital tuner built in, which means it is ready to receive the Freeview signal by
simply plugging it into your aerial socket (check if you can get digital TV through your aerial now,
When the TV switchover happens in your area, there are at least two occasions when you will need
to re-tune your TV in order to continue receiving your existing TV channels, and also to pick up new
ones. Digital UK, the body leading the digital TV switchover, will advise you when you need to re-
tune during the switchover.
17GB
Download from Www.Somanuals.com. All Manuals Search And Download.
How to re-tune:
1
2
3
4
5
6
Press "HOME" on the remote
Press G/g to select "Settings"
Press F/f to select "Digital Set-up", then press
Press to select "Digital Auto Tuning"
Press G to select "Yes" then press to start "Digital Auto Tuning"
Follow the on screen instructions.
If you are missing any channels, it may be that they are not available in your area, or that your aerial
needs upgrading.
If you have any questions, please contact Sony on 08705 111 999 or call Digital UK on 0845 6 50 50
†Calls charged at BT rate of 3p per minute daytime and 1p per minute evenings and weekends.
Rates may vary for calls from non-BT lines.
18GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|