Turning on the photo frame
Connecting the AC adaptor
Getting Started
Let’s Use the Photo Frame
4-295-326-11 (2)
Identifying the parts
Rear
Enjoying a slideshow
Insert a memory card or USB memory.
Connect the AC adaptor as illustrated below.
The photo frame is automatically turned on.
MENU (menu) button
(left/right) button
Insert memory card or USB memory firmly into the corresponding slot with its label side facing away from the
/
screen.
ENTER (enter) button
Playback automatically begins and images on the memory card are displayed one after another as a slideshow.
(on/standby) button
(USB A) connector (DPF-C1000/C800/C700 only)
Digital Photo Frame
Operating Instructions
Memory card slot
Holes for hanging the unit on the wall
Stand
USB memory
(DPF-C1000/C800/C700 only)
DC IN jack
To the DC IN connector
To a wall outlet
SD memory card
( slot)
When using the photo frame for the first time
Proceed to “ Setting up the photo frame”. If you have
not operated the photo frame for an extended period of time, the demonstration display begins.
“Memory Stick Duo”
( slot)
Compatible Memory Card/USB memory
If the initial settings have been already made
Turning on/off the photo frame
To turn the photo frame on
Proceed to “Let’s Use the Photo Frame”.
You can view images only by inserting a memory card (“Memory Stick Duo” or SD memory card) or USB memory
removed from a digital camera or equivalent into the photo frame.
Have the label of memory cards
facing outward
Usable Memory Card
Attaching the adaptor
Press (on/standby).
“Memory Stick Duo” (Not compatible with
“MagicGate”/Compatible with “MagicGate”)
“Memory Stick PRO Duo”
If multiple memory card are inserted into the memory card slots /, the photo frame will not work properly.
To turn the photo frame off
Not necessary
Hold (on/standby) pressed until the power is turned off.
“Memory Stick PRO-HG Duo”
If you insert a memory card or USB memory into an empty slot or connector when another memory card or USB memory has
already been inserted, the images from the latter inserted will be displayed.
Connect the AC adaptor to an easily accessible wall outlet close by. If trouble occurs while using the adaptor, immediately shut
“M2” adaptor (Duo size)
off the power by unplugging the AC adaptor from the wall outlet.
“Memory Stick Micro” (“M2”)
To pause the slideshow (Single view)
Press [ENTER]. The previous or next image can be displayed with
To resume the slideshow, press [ENTER] again.
If you will not be using the photo frame for a long time, press (on/standby) to turn the unit off after use, then disconnect the
/
.
AC adaptor from the DC IN jack on the unit and unplug the AC adaptor from the wall outlet.
Do not short-circuit the plug of the AC adaptor with a metal object. Doing so may cause a malfunction.
Do not use the AC adaptor placed in a narrow space, such as between a wall and furniture.
To remove the memory card
Do not disconnect the AC adaptor from the photo frame while the photo frame is on. Doing so may damage the photo frame.
The supplied AC adaptor is for exclusive use with this photo frame. It cannot be used with other equipment.
SD memory card/SDHC memory card
Not necessary
Press [MENU] to activate the menu display.
Remove the memory card from its slot in the opposite direction from which it was inserted.
The clock display will appear if the Demonstration mode setting is set to [OFF].
miniSD/miniSDHC card adaptor
Setting up the photo frame
miniSD/miniSDHC card
During a slideshow, do not remove the memory card. Doing so may damge the data recorted in the mamory card.
Before using the photo frame for the first time, make the initial settings, following the instructions on the screen.
The settings can be changed later.
microSD/microSDHC card adaptor
1 Press [MENU].
Changing the view mode
microSD/microSDHC card
The initial setting display appears.
You can change the slideshow view style or the clock style, or change to the index image display.
Move the blue box with
The current setting is underlined in yellow.
/
to select an item then press [ENTER] to set it.
Changing slideshow styles
USB memory (DPF-C1000/C800/C700 only)
2 Set the date.
1 Press [MENU].
DPF-C1000/C800/C700/C70A/C70E
Set the year, month, and day with
/
then press [ENTER].
Press
to select the year, month or day then press [ENTER]. Correct the number
with
/
then press [ENTER].
to select
No card adaptor is supplied with the photo frame.
Press
at lower right on the display then press [ENTER].
A “Memory Stick” (standard) cannot be used.
If you insert a memory card that requires an adaptor into a slot without an adaptor, it may not be removable.
In this photo frame, do not use the card adaptor with another card adaptor in which a memory card is inserted.
We cannot guarantee insertion of all types of memory cards and connection with all types of USB memory devices.
Before operating this unit, please read this manual thoroughly and retain it for future reference.
The display format for the date is selectable.
DD-MM-YYYY: Day-Month-Year
MM-DD-YYYY: Month-Day-Year
YYYY-MM-DD: Year-Month-Day
2 Press
/
to select
(Slideshow) then press [ENTER].
Enjoy Images with the Digital Photo Frame!
Attaching the stand
The Sony digital photo frame enables you to view images from
other equipment (a digital camera, for example) on the LCD
screen easily.
Operation is very simple. Insert a memory card in which images
are stored. A slideshow of your memorial photos starts.
The digital photo frame can be used as a clock after you eject the
memory card.
3 Set the time in the same operation of date setting in step 2.
Align the claw of the stand with the bottom of the unit then insert it firmly until it clicks as illustrated.
Set the hour, minute, and second, using
/
and [ENTER], respectively.
Press
to select
at lower right on the display then press [ENTER].
The display format for the time is selectable.
AM/PM 12H: 12-hour display
24H: 24-hour display
3 Press
/
to select the desired slideshow view style then press [ENTER].
4 Set the timer if desired.
Notes on the descriptions in this manual
Single view
You can set the photo frame to turn on/off automatically at a specified time.
The illustrations and screenshots in this manual are of the DPF-C1000 unless otherwise noted. The
illustrations and screenshots in this manual may not be identical to those actually used or displayed.
Not all models of the digital photo frame are available in all countries and regions.
The factory setting for the date or the clock display style differs according to country and region.
“Memory card” in this manual means memory card or USB memory, except where specific explanations
for each are given.
Displays a single screen, one after another.
Except for European models:
To set
Refer to steps 3 and 4 of “To set the timer” on the reverse side.
Multi image view
Displays multiple images at the same time.
Not to set
Press
to select
at lower right on the display then
press [ENTER].
Do not place the photo frame on an unstable or tilted surface.
Do not carry the photo frame by holding only the stand. The photo frame may fall.
To hang the photo frame on the wall
Clock view
Displays a clock with current date and time while showing images one after another.
Checking the included items
1 Prepare commercially available screws suitable for the holes on the rear of the unit.
For European models:
You can set the photo frame to turn off automatically at a specified time.
(Auto OFF setting)
Digital photo frame (1)
Hole on the rear panel
Stand (1)
ф5 mm
(7/32 inch)
4 mm
(3/16 inch)
Random view
AC adaptor (1)
Exchange panels (2) (DPF-C70E only)
Operating Instructions (this manual) (1)
Warranty (1) (In some regions, the warranty is not packaged with the product.)
Displays images while switching among the various slideshow styles and effects.
: The power is turned off after 4 hours.
10 mm
(13/32 inch)
More than 25 mm
(1 inch)
: The power is turned off after 2 hours.
: The Auto OFF setting is not active.
Changing clock styles
1 Press [MENU].
2 Drive the screws (commercially available) into the wall.
Press
confirm.
to select
at lower right on the display then press [ENTER] to
Make sure the screws protrude 2.5 mm to 3 mm (approx. 1/8 inch) from the surface of the wall.
5 Select the Demonstration mode setting with
/
then press
[ENTER].
Approx.
ON: The demonstration display appears.
OFF: The clock display appears.
2.5 mm – 3 mm
(1/8 inch)
6 Press
to select
at lower right on the display then press
[ENTER].
3 Hang the photo frame on the wall by fitting the screw head through the hole on the rear of the
2 Press
/
to select
(Clock) then press [ENTER].
This completes the initial settings.
When the Demonstration mode setting is set to [OFF], the clock display will appear automatically after a while.
unit.
Use screws suited for the wall material. The screws may be damaged, depending on the type of material used in the wall. Drive
the screws to the stud in the wall or a pillar.
Firmly tighten the screws to prevent the photo frame from falling.
When you want to reinsert the memory card, remove the photo frame from the wall, then eject and reinsert the memory card
while the photo frame is lying on a stable surface.
Remove the stand before hanging the photo frame on the wall.
3 Press
/
to select the desired clock or calendar style then
Connect the DC cable of the AC adaptor to the photo frame and hang the photo frame on the wall. Then plug the AC adaptor to
the wall outlet.
press [ENTER].
Sony takes no responsibility for any accidents or damage caused by improper attachment, misuse, natural disasters, etc.
While the photo frame is mounted on the wall, it may fall if you use buttons on it. Support it carefully so as not to drop it.
Continued
Download from Www.Somanuals.com. All Manuals Search And Download.
|