Prepare the battery
Turn the camera on/set the clock
Insert a “Memory Stick” (not supplied)
2-629-893-11 (1)
1
Terminal side
1 Insert the batteries.
1 Select
.
2 Press POWER.
3 To wall outlet
Match 3/# and
Digital Still Camera
(wall socket)
Battery charger
Clock Set
insert.
Y/M/D
M/D/Y
D/M/Y
2005
/
1
/
1
12
:
00
AM
Cancel
OK
Lighting
Read This First
Before operating the unit, please read this manual and “User’s Guide/Troubleshooting” (separate
volume) thoroughly, and retain it for future reference.
Open the “Memory Stick” cover.
Insert the “Memory Stick” all the way in
until it clicks.
Close the cover.
Power cord
(mains lead)
When there is no “Memory Stick” inserted
Operating Instructions
CHARGE lamp
The camera records/plays back images using the internal memory (32 MB). t “User’s Guide/
Troubleshooting” (page 24)
Light on: Charging
Light off: Completed (Remove the
batteries.)
3 Set the clock with the control button.
1 Select the date display format with v/V, then press z.
2 Connect the power cord
(mains lead).
Clock Set
Select the image size for use
Y/M/D
M/D/Y
D/M/Y
• Connect the battery charger to an easily accessible wall outlet (wall socket) close by.
• Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power
source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs
while using the battery charger, immediately shut off the power by disconnecting the plug from
the wall outlet (wall socket).
2005 /
/
12 : 00
OK
AM
Cancel
1
1
1 Select a mode.
2 Press
(Image Size).
2 Select each item with b/B and set the numeric value with
DSC-H1
• When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall
socket), and remove the Nickel-Metal Hydride batteries from the battery charger.
Still image:
v/V, then press z.
3 Select the size with v/V.
Clock Set
5M
3:2
3M
Y/M/D
M/D/Y
D/M/Y
Nickel-Metal Hydride battery
Charging time
Select
.
NH-AA-DA×2 (supplied)
Approx. 6 hours
2005 /
/
12 : 00
1M
VGA
1
1
OK
AM
Cancel
1M
(E-Mail)
• Time required to charge fully depleted Nickel-Metal Hydride batteries at a temperature of 25°C
(77°F). Charging may take longer under certain circumstances or conditions.
Image Size
Movie:
• The screen above is for still images.
For movies, select [640(Fine)] (“Memory Stick
PRO” only), [640(Standard)] or [160].
• The CHARGE lamp may remain lit longer than six hours, but this is not a malfunction.
3 Select [OK] with B, then press z.
Select
.
4 Insert the charged batteries.
Clock Set
Y/M/D
M/D/Y
D/M/Y
Refer to “User’s Guide/Troubleshooting”
(separate volume)
Explains advanced techniques and what to do if you experience trouble with
your camera.
Bottom
4 Press
(Image Size) to
2
2005 /
/
10 : 30
1
1
OK
AM
Cancel
complete the setting.
1
1
2
• To cancel, select [Cancel] and press z.
While pressing OPEN, open the
battery cover.
Match 3/# and insert.
Close the cover.
Printed on 100% recycled paper using VOC
(Volatile Organic Compound)-free vegetable
button
© 2005 Sony Corporation Printed in Japan
oil based ink.
Using batteries other than the supplied ones
To change the date and time
Select [Clock Set] in the (Setup) screen and perform the procedure in step 3 above.
On still image sizes
You can use HR 15/51:HR6 (size AA) Nickel-Metal Hydride batteries/ZR6 (size AA) Oxy
For details on the image size t “User’s Guide/Troubleshooting” (page 13)
Nickel Primary Battery. t “User’s Guide/Troubleshooting” (page 98)
t “User’s Guide/Troubleshooting” (page 61)
Image size
Guidelines
No. of images
Printing
Fine
Checking the accessories supplied
5M (2592×1944)
(the default setting)
For printing high density images in A4 or
A5 size
Less
Using the AC Adaptor
On the clock display
• Ni-MH battery charger BC-
CS2A/CS2B (1)
• USB cable (1)
• Lens cap (1)/Lens cap strap
(1)
You can connect the camera using the AC-LS5K AC Adaptor (not supplied). t “User’s Guide/
Troubleshooting” (page 15). Refer to the operating instructions supplied with the AC Adaptor.
• If you selected [D/M/Y] in step 3-1, set the time on a 24-hour cycle.
3:2 (2592×1728)*
3M (2048×1536)
1M (1280×960)
• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
For printing in postcard size
For recording a larger number of images
For attaching images to e-mail or creating
web pages
When turning on the power
To check the remaining battery time
• A/V cable (1)
VGA(E-Mail)
(640×480)
• Unless you set the clock, the Clock Set screen appears each time the camera is turned on.
Press POWER to turn on and check the time on the screen.
• Do not touch the lens portion as the lens portion extends. Also, do not leave the camera with the lens portion
extended for a long period of time with the power off as this may cause malfunction.
More
Rough
• Power cord (mains lead) (1)
Battery
remaining
indicator
• CD-ROM (Cyber-shot
application software) (1)
*Images are recorded in the same 3:2 aspect ratio as photograph printing paper or postcards, etc.
• Shoulder strap (1)
• The following screen appears when the camera is turned on for the second time or afterwards.
VGA
• Operating instructions for
digital still camera “Read
This First” (this manual) (1)
96
On recordable number of still images and recordable time of movies
Recordable number of still images and recordable time of movies vary depending on the image
size selected.
Battery
remaining
guidelines
Sufficient
power
remaining
Battery half full Battery low,
recording/
Change the batteries with
fully charged ones, or
charge the batteries. (The
warning indicator flashes.)
playback will
stop soon.
• Operating instructions
“User’s Guide/
Troubleshooting” (1)
• Lens hood (1)
S
AF
For details on recordable number or time t “User’s Guide/Troubleshooting” (page 23)
• The displayed time remaining may not be correct under certain circumstances.
Still images
Movies
• HR6 (size AA) Nickel-Metal
Hydride batteries (2)
A “Memory Stick” is not
supplied.
To turn off the power
• When using Oxy Nickel Primary Battery, the battery remaining indicator does not display the correct
information.
Maximum recordable image
Maximum recordable time
Press POWER again.
The camera has the own
internal memory (32 MB),
however, purchase of a
“Memory Stick” is
recommended.
• When the AC Adaptor (not supplied) is used, the battery remaining indicator is not displayed.
• If the camera is running on battery power and you do not operate the camera for a period of time, the camera
turns off automatically to prevent wearing down the battery (Auto power-off function).
• Adaptor ring (1)
To remove the batteries
Changing the language setting
• Number of recordable images and time can differ according to shooting conditions.
• Battery case (1)
Hold the camera with the battery cover facing upward, then open the battery cover and remove
the batteries. Be careful not to drop the batteries.
You can change the screen display to show messages in a specified language. To change the
language setting, press MENU to display the menu screen. Select
To remove a “Memory Stick”
(Setup) with the control
Open the “Memory Stick” cover, then push
the “Memory Stick” in once.
button, then, select [ Language] in
Guide/Troubleshooting” (page 59)
(Setup1), and select the desired language. t “User’s
To use your camera abroad — Power sources
A
1
You can use your camera, the supplied battery charger, and the AC Adaptor (not supplied) in any
country or region where the power supply is within 100 V to 240 V AC, 50/60 Hz. Use a
commercially available AC plug adaptor [a], if necessary, depending on the design of the wall
outlet (wall socket) [b].
“Memory Stick”
cover
Notes before use
• Charge the supplied batteries before using the camera for the first time.
Access lamp
• The camera is a precision instrument. Be careful not to bump the lens or the LCD screen, and not to
apply force to it. Attach the shoulder strap to prevent the camera from damage by being dropped, etc.
t “User’s Guide/Troubleshooting” (page 16)
• Do not use an electronic transformer (travel converter), as
this may cause a malfunction.
BC-CS2A/
CS2B
When the access lamp is lit
Never open the battery cover, remove the “Memory Stick” or turn off the power. The data may be
corrupted.
Additional information on this product and answers to frequently asked questions can be
found at our Customer Support Website.
continued on the reverse
Download from Www.Somanuals.com. All Manuals Search And Download.
|