3-061-981-13(1)
Digital Still
Camera
Operating Instructions
Before operating the unit, please read this manual thoroughly, and retain
it for future reference.
Owner’s Record
The model and serial numbers are located on the bottom. Record the
serial number in the space provided below. Refer to these numbers
whenever you call upon your Sony dealer regarding this product.
Model No. DSC-F505V
Serial No. ________________________
DSC-F505V
©2000 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
The shielded interface cable recommended
in this manual must be used with this
equipment in order to comply with the limits
for a digital device pursuant to Subpart B of
Part 15 of FCC Rules.
Should the fuse in the plug supplied need to
be replaced, a 5 AMP fuse approved by
ASTA or BSI to BS 1362, (i.e. marked with
or
mark) must be used.
If the plug supplied with this equipment has
a detachable fuse cover, be sure to attach the
fuse cover after you change the fuse. Never
use the plug without the fuse cover. If you
should lose the fuse cover, please contact
your nearest Sony service station.
For the Customers in the
U.S.A. and Canada
DISPOSAL OF LITHIUM ION
BATTERY.
For the Customers in
Germany
LITHIUM ION BATTERY.
DISPOSE OF PROPERLY.
You can return your unwanted lithium ion
batteries to your nearest Sony Service
Center or Factory Service Center.
Directive:EMC Directive 89/336/EEC.92/
31/EEC
This equipment complies with the EMC
regulations when used under the following
circumstances:
• Residential area
• Business district
• Light-industry district
Note:
In some areas the disposal of lithium ion
batteries in household or business trash may
be prohibited.
(This equipment complies with the EMC
standard regulations EN55022 Class B.)
For the Sony Service Center nearest you call
1-800-222-SONY (United States only)
For the Sony Factory Service Center nearest
you call 416-499-SONY (Canada only)
Attention
Caution:
Do not handle damaged or leaking lithium
ion battery.
The electromagnetic fields at the specific
frequencies may influence the picture and
sound of this camera.
For the Customers in Canada
“Memory Stick”
CAUTION
TO PREVENT ELECTRIC SHOCK, DO
NOT USE THIS POLARIZED AC PLUG
WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET
UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE
EXPOSURE.
N50
For the Customers in CANADA
This Class B digital apparatus complies with
Canadian ICES-003.
For the Customers in the
U.S.A.
NOTICE FOR THE
CUSTOMERS IN THE UNITED
KINGDOM
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
A moulded plug complying with BS 1363 is
fitted to this equipment for your safety and
convenience.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Precaution on copyright
Battery Pack
Television programs, films, video tapes, and
other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the provision of the
copyright laws.
For the Customers in the
U.S.A. and Canada
THIS CLASS B DIGITAL DEVICE
COMPLIES WITH PART 15 OF THE
FCC RULES AND THE CANADIAN
ICES-003 OPERATION IS SUBJECT
TO THE FOLLOWING TWO
CONDITIONS:
Do not shake or strike the camera
In addition to malfunctions and inability to
record images, this may render the
“Memory Stick” unusable or image data
breakdown, damage or loss may occur.
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED
LCD screen and lens
• The LCD screen is manufactured using
high-precision technology. However, there
may be some tiny black points and/or
bright points (red, blue or green in color)
that constantly appear on the LCD screen.
These points are normal in the
OPERATION.
manufacturing process and do not affect
the recording in any way. Over 99.99% of
the pixels are operational for effective use.
• Be careful when placing the camera near a
window or outdoors. Exposing the LCD
long periods may cause malfunctions.
Be sure to read the following
before using your camera
Trial recording
Before you record one-time events, you may
want to make a trial recording to make sure
that the camera is working correctly.
Do not get the camera wet
When taking pictures outdoors in the rain or
under similar conditions, be careful not to
get the camera wet. If moisture
condensation occurs, refer to page 55 and
follow the instructions on how to remove it
before using the camera.
No compensation for contents of
the recording
Contents of the recording cannot be
compensated for if recording or playback is
not possible due to a malfunction of your
camera, etc.
Back up recommendation
To avoid the potential risk of data loss,
always copy (back up) data to a disk.
Notes on image data compatibility
• This camera conforms with the Design
Rules for Camera File Systems universal
standard established by the JEIDA (Japan
Electronic Industries Development
Association). You cannot play back on
your camera still images recorded on other
equipment (DCR-TRV890E/TRV900/
TRV900E, DSC-D700, DSC-D770) that
does not conform with this universal
standard. (These models are not sold in
some areas.)
About the Carl Zeiss lens
This camera is equipped with a Carl Zeiss
lens which is capable of reproducing fine
images. The lens for this camera uses the
MTF* measurement system for cameras
developed jointly by Carl Zeiss, in
Germany, and Sony Corporation, and
offers the same quality as other Carl
Zeiss lenses.
• Playback of images recorded with your
camera on other equipment and playback
of images recorded or edited with other
equipment on your camera are not
guaranteed.
∗ MTF is the abbreviation of Modulation
Transfer Function/Factor, a numeric
value indicating the ability to reproduce
the subject contrast.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Adjusting the exposure
Adjusting the white balance
Recording the date and time on the still
Enjoying picture effects
Basic operations
B Various playback
Playing back six images at once
B Recording
Enlarging a part of the still image
B Playback
Playing back still images .................... 22
Playing back the images in order
Viewing images using a personal
B Editing
Preventing accidental erasure
Image file storage destinations and
Changing the recorded still image size
Before performing advanced operations
Selecting still images to print
B Various recording
Setting the image size
LCD screen indicators ........................ 65
Recording still images for e-mail
Adding audio files to still images
Recording uncompressed images
Using the spot light-metering mode .... 42
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Identifying the parts
See the pages in parentheses for details of operation.
1
2
3
4
9 0
5
qa
qs
6
qd
qf
qg
qh
7
8
A Built-in microphone
Do not touch while recording.
B Self-timer/Recording lamp
M
(one-push white balance)
button (43)
N WHT BAL (white balance)
button (43)
G Lens
P FOCUS AUTO/MANUAL switch
H Photocell window for flash
Do not block while recording.
Audio output is monaural.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
7
1
2
8
9
0
qa
qs
qd
3
4
5
6
qf
qg
A Zoom lever
I Battery/“Memory Stick” cover
B POWER switch
POWER lamp
J
(flash) button
Flash lamp
C LCD screen
D LCD BACK LIGHT switch
K OPEN switch
Usually set to ON. Set to OFF to
save the battery if you use your
camera in bright place.
L Slot cover for AC power
adaptor/charger (12)
M
(External flash) jack
E PROGRAM AE ADJ button
VOLUME +/– button
N DISPLAY button
O Control button
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3
1
2
4
A Speaker
D Hook for the lens cap/shoulder
strap
B Hook for the wrist/shoulder
Be sure to remove the lens cap
before turning on your camera.
strap
C Tripod receptacle (bottom
surface)
Use a tripod with a screw length of
less than 9/32 inch (6.5 mm). You
will be unable to firmly secure the
camera to tripods having longer
screws, and may damage the
camera.
Attaching the lens cap (supplied) and the wrist strap (supplied).
Lens cap
Lens cap strap
Wrist strap
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the power supply
Charging the battery pack
Your camera operates only with the “InfoLITHIUM” NP-FS11 battery pack* (S
series). You cannot use any other battery pack.
Battery pack (S series)
To the wall outlet
CHARGE lamp
(mains)
(orange)
AC-VF10 AC power adaptor/charger (supplied)
Connect the AC power adaptor/charger and the wall outlet (mains).
1
Insert the battery pack in the direction of the v mark. Slide the
battery pack in the direction of the arrow.
2
The CHARGE lamp lights up when charging begins. When the CHARGE lamp
goes off, normal charge is completed. For full charge, which allows you to
use the battery longer than usual, leave the battery pack inserted for about one
hour after normal charge is completed.
To remove the battery pack
Slide the battery pack in the direction opposite the v mark.
* What is “InfoLITHIUM”?
“InfoLITHIUM” is a lithium ion battery pack which can exchange information such as battery
consumption with compatible video equipment. This unit is compatible with the
“InfoLITHIUM” battery pack (S series). “InfoLITHIUM” S series battery packs have the
mark. “InfoLITHIUM” is a trademark of Sony Corporation.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging time
Battery pack
NP-FS11 (supplied)
Full charge (min.)
Normal charge (min.)
170
110
Approximate time to charge a completely discharged battery pack using the AC-
VF10 AC power adaptor/charger.
Battery life and number of images that can be recorded/played back
STILL mode recording*
LCD BACK LIGHT
Battery life (min.)
70 (65)
Number of images
1300 (1200)
ON
OFF
85 (75)
1600 (1400)
STILL mode playback**
LCD BACK LIGHT
Battery life (min.)
110 (100)
Number of images
2200 (2000)
ON
OFF
145 (130)
2900 (2600)
Approximate battery life and number of images that can be recorded/played back
with a fully charged battery pack at a temperature of 77°F (25°C), 640×480 image
size and in NORMAL recording mode. Numbers in parentheses indicate the time
when you use a normally charged battery pack.
∗ Recording at about 4-second intervals
∗∗Playing back single images in order at about 3-second intervals
MOVIE mode recording
LCD BACK LIGHT
Continuous recording time (min.)
ON
75 (65)
85 (75)
OFF
Approximate time that can be recorded with a fully charged battery pack at a
temperature of 77°F (25°C) and 160×112 image size. Numbers in parentheses
indicate the time when you use a normally charged battery pack.
Notes
• The battery life and number of images will be decreased if you use your camera at low
temperatures, use the flash, repeatedly turn the power on/off or use the zoom.
• The capacity of the “Memory Stick” is limited. The above figures are a guide when you
continuously record/play back while replacing the “Memory Stick.”
• If sufficient battery remaining time is indicated but the power runs out soon, fully charge the
battery so that the correct battery remaining time appears.
• Do not expose the battery pack to water.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the battery pack
Battery eject lever
Battery pack
(S series)
Open the battery/“Memory Stick” cover.
Open the cover while sliding the OPEN switch in the direction of the arrow.
1
2
Install the battery pack.
Insert the battery pack with the v mark facing toward the battery compartment
as illustrated.
Close the battery/“Memory Stick” cover.
3
To remove the battery pack
Open the battery/“Memory Stick” cover. Slide the battery eject lever upward,
and remove the battery pack.
Be careful not to drop the battery pack when removing it.
Battery remaining indicator
The LCD screen on the camera shows the remaining time for which you can still
record or play back images.
This indication may not be entirely accurate depending on the conditions of use and
the operating environment.
Auto power-off function
If you do not operate the camera for about three minutes during recording, the camera
turns off automatically to prevent wearing down the battery. To use the camera again,
slide the POWER switch to turn on the camera again.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the AC power adaptor
DK-115
DC connecting
cable (supplied)
Slot cover for AC power
adaptor/charger
Power cord (mains lead)
AC-VF10 AC power adaptor/
charger (supplied)
Open the battery/“Memory Stick” cover.
1
2
Insert the one end of the DK-115 DC connecting cable to the
battery terminal, and close the cover.
When inserting the cable, open the slot cover for AC power adaptor/charger and
be careful not to pinch the cable.
Connect the other end of the DC connecting cable to the AC power
adaptor/charger.
3
4
Connect the power cord (mains lead) to the AC power adaptor/
charger and then to a wall outlet (mains).
Using a car battery
Use Sony DC adaptor/charger (not supplied).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the date and time
When you first use your camera, set the date and time. If these are not set, the
CLOCK SET screen appears whenever you turn on your camera for recording.
Control button
Slide the POWER switch in the direction of the arrow to turn on the
power.
1
The POWER lamp lights up.
Press v on the control button.
The menu bar appears on the LCD screen.
2
Select [SETUP] with B on the control button,
then press the center z.
3
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Select [CLOCK SET] with v/V on the control button, then press the
center z.
4
Select the desired date display format with
v/V on the control button, then press the
center z.
Select from [Y/M/D] (year/month/day), [M/D/Y]
(month/day/year) or [D/M/Y] (day/month/year).
5
6
Select the year, month, day, hour or minute
item you want to set with b/B on the control
button.
The item to be set is indicated with v/V.
Set the numeric value with v/V on the control button, then press
the center z to enter it.
After entering the number, v/V moves to the next item.
7
8
Select [ENTER] with B on the control button,
then press the center z at the desired
moment to begin clock movement.
The date and time are entered.
To cancel the date and time setting
Select [CANCEL] with v/V/b/B on the control button, then press the center z.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the “Memory Stick”
Access lamp
“Memory Stick”
Open the battery/“Memory Stick” cover.
Open the cover while sliding the OPEN switch in the direction of the arrow.
1
Insert the “Memory Stick.”
Insert the “Memory Stick” with the B mark facing toward the battery
2
compartment as illustrated until it clicks.
Close the battery/“Memory Stick” cover.
3
Removing the “Memory Stick”
Open the battery/“Memory Stick” cover, then press the “Memory Stick” once lightly.
Notes
• Insert the “Memory Stick” firmly until it clicks, otherwise a message such as “MEMORY
STICK ERROR” will be displayed.
• Never remove the “Memory Stick” or turn off the power while the access lamp is lit up.
• You cannot record or edit images on a “Memory Stick” if the erasure prevention switch is set to
the LOCK position.
Connector
Erasure prevention switch
OC
Label space
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
B Recording
Recording still images
Still images are recorded in JPEG format.
To record still images, slide the POWER switch to the right to turn on the power and
insert a “Memory Stick.”
POWER switch
Set the MODE selector to STILL.
1
Press and hold the shutter button halfway
2
Remaining memory
capacity indicator
down and check the image.
While the AE lock indicator z (green) is flashing,
the image freezes momentarily, but is not yet
recorded. When the camera finishes the automatic
adjustments*, the AE lock indicator z lights up
and the camera is ready for recording.
To cancel the recording, release the shutter button.
AE lock indicator
Press the shutter button fully down.
The shutter sounds and the image is recorded on the “Memory Stick.”
3
When “RECORDING” disappears, you can record the next image.
∗ Exposure and focus are automatically adjusted.
The number of images you can record on a “Memory Stick”
Notes
• While the image is being recorded on the “Memory Stick,” do not shake or strike the camera.
Also, do not turn the power off, or remove the battery pack or “Memory Stick.”
• When recording a bright subject, the LCD screen color may change after AE lock, but this does
not affect the recorded image.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the last recorded image (Quick Review)
You can check the last recorded image by clearing the menu bar from the screen
mode, press lightly on the shutter button or select [RETURN] with b/B on the
control button and then press the center z. You can also delete the image first by
selecting [DELETE] on the Quick Review screen with b/B on the control button and
pressing the center z, and then selecting [OK] with v/V on the control button and
pressing the center z.
Using the zoom feature
Zoom lever
W side: for wide-angle (subject appears
farther away)
T side: for telephoto (subject appears closer)
Minimum focal distance to the subject
W side: About 9 7/8 inches (25 cm) or more
T side: About 31 1/2 inches (80 cm) or more
Digital zoom function
This camera has a digital zoom function.
Digital zoom enlarges the image by digital processing and it starts to function when
zoom exceeds 5×.
The T side of the bar shows the
digital zooming zone.
Using digital zoom
• The maximum zoom magnification is 10×.
• Digital zooming deteriorates the picture quality. When digital zoom is not
Note
Digital zoom does not work for moving images.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the lens orientation
You can adjust the angle by turning the lens part upward up to 90 degrees and
downward up to 50 degrees.
MODE selector
90°
Lens part
50°
LCD screen indicators during recording
Press DISPLAY to turn on/off the indicators on the LCD screen.
DISPLAY
Notes
• You cannot turn off the self-timer indicators and some of the indicators used in advanced
operations.
• The indicators on the LCD screen are not recorded.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the self-timer
When you use the self-timer function, the subject is recorded about 10 seconds after
you press the shutter button.
Shutter button
Self-timer lamp
Control button
Select
(self-timer) indicator on the LCD screen with v/V/b/B on the control
(self-timer) indicator appears on the LCD
button, then press the center z. The
screen, and about 10 seconds after you press the shutter button, the subject is
recorded. The self-timer lamp flashes after you press the shutter button until the
shutter is released.
Recording images with the flash
Slide OPEN switch to make the flash available. The flash pops up. The initial setting
is auto (no indicator). In this mode, the flash automatically strobes when the
surroundings become dark. When you change the flash mode, press the
(flash)
repeatedly so that the flash mode indicator appears on the LCD screen. You can only
change the flash mode while the flash is popped up.
Flash emitter
(flash)
OPEN switch
Photocell window for
flash
Each time you press the
(flash), the indicator changes as follows.
(No indicator)
(No indicator) t
t
t
t
Auto red-eye reduction: The flash strobes before recording to reduce the
red-eye phenomenon.
Forced flash:
The flash strobes regardless of the surrounding
brightness.
No flash:
The flash does not strobe.
You can change the brightness of the flash (FLASH LEVEL) in the menu settings
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• The recommended shooting distance using the built-in flash is 31/32 feet to 8 1/3 feet (0.3 m to
2.5 m).
• Attaching a conversion lens (not supplied) may block the light from the flash or cause the lens
shadow to appear.
• You cannot use an external flash and the built-in flash at the same time.
• If the flash is closed when it should be used, the
(no-flash) indicator appears in the LCD
screen.
• Auto red-eye reduction may not produce the desired red-eye reduction effects depending on
individual differences, the distance to the subject, if the subject does not see the pre-strobe, or
other conditions. In addition, red-eye reduction effects are also difficult to obtain if you set the
shutter to a slow speed in the PROGRAM AE shutter priority mode.
• The flash effect is not obtained easily when you use forced flash in a bright location.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording moving images
Moving images with audio are recorded in MPEG format.
To record moving images, slide the POWER switch to the right to turn on the power
and insert a “Memory Stick.”
POWER switch
DISPLAY
Set the MODE selector to MOVIE.
1
Press the shutter button fully down.
“REC” appears on the LCD screen, and the image and sound are recorded on
the “Memory Stick.”
2
If you press the shutter button momentarily
The image and sound are recorded for five seconds. You can change the
recording time to 10 or 15 seconds with [REC TIME SET] in the menu settings
If you hold the shutter button down
The image and sound are recorded while the shutter button is held down for up
to 60 seconds. However, when [IMAGE SIZE] in the menu setting is set to
Zooming or using the self-timer, etc.
LCD screen indicators during recording
Press DISPLAY to turn on/off the indicators on the LCD screen.
indicators.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
B Playback
Playing back still images
POWER switch
DISPLAY
Set the MODE selector to PLAY.
The last recorded image (still or moving) appears on the LCD screen.
1
Press v on the control button to display the menu bar on the LCD
screen.
2
3
Select the desired still image with the
control button.
Press v/V/b/B on the control button to select "b/B"
on the LCD screen, then press b/B on the control
button.
"b: To display the preceding image.
B": To display the next image.
When the menu bar is not displayed
You can directly select and play back the image with b/B on the control button.
Notes
• You might not be able to correctly play back images recorded with this camera on other
equipment.
• You cannot play back on this camera images larger than the maximum image size that can be
recorded with this camera.
LCD screen indicators during still image playback
Press DISPLAY to turn on/off the indicators on the LCD screen.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing back moving images
POWER switch
DISPLAY
VOLUME +/–
Set the MODE selector to PLAY.
The last recorded image (still or moving) appears on the LCD screen.
1
Press v on the control button to display the menu bar on the LCD
screen.
2
Select the desired moving image with the
control button.
3
Moving images are displayed one-size smaller than
still images.
Press v/V/b/B on the control button to select "b/B"
on the LCD screen, then press b/B on the control
button.
"b: To display the preceding image.
B": To display the next image.
B (playback)/X (pause)
Select B (playback) on the LCD screen with
v/V/b/B on the control button, then press the
center z.
4
The moving image and sound are played back.
During playback, B (playback) changes to X
(pause).
Playback bar
To pause playback
Select X (pause) on the LCD screen with v/V/b/B on the control button, then press
the center z.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
When the menu bar is not displayed
You can directly select the image with b/B on the control button, and play back the
image and sound by pressing the center z. When you press the center z during
playback, playback is paused.
Moving images recorded with the image of [320 (HQ)]
The images are displayed over the entire screen in steps 3 and 4.
Adjusting the volume
Press VOLUME +/– to adjust the volume.
LCD screen indicators during moving image playback
Press DISPLAY to turn on/off the indicators on the LCD screen.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing images using a personal
computer
You can view data recorded with your camera on a personal computer and attach it to
e-mail. This section describes the method for installing the USB driver and viewing
images on a personal computer. Be sure to also see the operation manuals for your
personal computer and application software.
Note
Data recorded with your camera is stored in the following formats. Make sure that applications
that support these file formats are installed on your personal computer.
• Still images (other than TEXT and uncompressed modes): JPEG format
• Moving images/audio:
• Uncompressed mode still images:
• TEXT mode:
MPEG format
TIFF format
GIF format
Recommended computer environment
Recommended Windows environment
OS: Microsoft Windows 98, Windows 98SE
Standard installation is required.
Operation is not assured in an environment upgraded from:
Windows 3.1, Windows 95 to Windows 98 or
Windows 98 to Windows 98SE.
CPU: MMX Pentium 200 MHz or faster
The USB connector must be provided as standard.
ActiveMovie Player (DirectShow) must be installed (to play back moving pictures).
Recommended Macintosh environment
Macintosh computer with the Mac OS 8.5.1/8.6/9.0 standard installation
However, note that the update to Mac OS 9.0 should be used for the following models.
• iMac with the Mac OS 8.6 standard installation and a slot loading type CD-ROM drive
• iBook or G4 with the Mac OS 8.6 standard installation
The USB connector must be provided as standard.
QuickTime 3.2 or newer must be installed (to play back moving pictures).
Notes
• Operations are not guaranteed for either the Windows or Macintosh environment if you connect
two or more USB equipment to a single personal computer at the same time (except for the
USB keyboard and mouse which are provided as standard), or when using a hub.
• Depending on the type of USB equipment that is used simultaneously, some equipment may
not operate.
• Operations are not guaranteed for all the recommended computer environments mentioned
above.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the USB driver
Before connecting your camera to your personal computer, install the USB driver to
the computer. The USB driver is contained together with application software for
viewing images on a CD-ROM which is supplied with your camera.
For Windows 98 users
Turn on your personal computer and allow Windows 98 to load.
1
Insert the supplied CD-ROM in the CD-ROM drive of your personal
computer.
2
Connect the USB jack on your camera with the USB connector on
your personal computer using the supplied USB cable.
3
to the USB connector
to the USB jack
Push in until the
connector clicks
into place
USB cable
Personal computer
Insert a “Memory Stick” into your camera, connect the AC power
adaptor/charger and turn on your camera.
4
“PC MODE” appears on the LCD screen of your camera and the camera is set
to communication standby mode. Your personal computer recognizes the
camera, and the Windows 98 Add Hardware Wizard starts.
Follow the on-screen messages to specify the CD-ROM drive and
install the USB driver.
5
The Add Hardware Wizard starts twice because two different USB drivers are
installed. Be sure to allow the installation to complete without interrupting it.
Note
Be sure to insert a “Memory Stick” into your camera before installing the USB driver.
Otherwise, you will be unable to install the USB driver.
For Macintosh users
Turn on your personal computer and allow the Mac OS to load.
1
Insert the supplied CD-ROM in the CD-ROM drive of your personal
computer.
2
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Double-click the CD-ROM drive icon to open the window.
3
4
Double-click the icon of the hard disk containing the OS to open
the window.
Move the following two files from the window opened in step 3 to
5
the “System Folder” icon in the window opened in step 4 (drag
and drop).
• Sony USB Driver
• Sony USB Shim
When “Put these items into the Extensions folder?” appears, click
“OK.”
6
7
Restart your personal computer.
Viewing images
For Windows 98 users
Turn on the power of your personal computer and allow
Windows 98 to load.
1
Connect one end of the USB cable to the USB jack on the camera
and the other end to the USB connector on your personal
computer.
2
to the USB connector
to the USB jack
Push in until the
connector clicks
into place
USB cable
Personal computer
Insert a “Memory Stick” into your camera, and connect the AC
power adaptor/charger to your camera and then to a wall outlet
(mains).
3
Turn on the power of your camera.
“PC MODE” appears on the LCD screen of the camera.
4
5
Open “My Computer” on Windows 98 and double click the newly
recognized drive. (Example: “Removable Disk (D:)”)
The folders inside the “Memory Stick” are displayed.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Select and double-click the desired image/sound file from the
folder.
6
For the detailed folder and file name, see “Image file storage destinations and
Desired file type
Double-click in this order
Still image
“Dcim” folder
t
t
t
t
“100msdcf” folder
t
Image file
Moving image* “Mssony” folder
“Moml0001” folder t Image file*
Audio*
“Mssony” folder
“Mssony” folder
“Momlv100” folder t Audio file*
E-mail image
TIFF image
“Imcif100” folder
t
Image file
(uncompressed)
∗ Copying a file to the hard disk of your personal computer before viewing it is
recommended. If you play back the file directly from the “Memory Stick”, the image
and sound may break off.
Notes on using your personal computer
“Memory Stick”
• “Memory Stick” operations on your camera cannot be assured if the “Memory Stick” has been
formatted on your personal computer.
• Do not optimize the “Memory Stick” on a Windows machine. This will shorten the “Memory
Stick” life.
• Do not compress the data on the “Memory Stick.” Compressed files cannot be played back on
your camera.
Software
• Depending on your application software, the file size may increase when you open a still image
file.
• When you load an image modified using the supplied retouch software from your personal
computer to the camera or when you directly modify the image on the camera, the image
format will differ so the “FILE ERROR” message may appear and you may be unable to open
the file.
Communications with your personal computer
Communications between your camera and your personal computer may not recover after
recovering from Suspend, Resume, or Sleep.
• Windows and ActiveMovie, DirectShow are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
• Macintosh and Mac OS, QuickTime are trademarks of Apple Computer, Inc.
• All other product names mentioned herein may be the trademarks or registered trademarks of
their respective companies. Furthermore, “™” and “®” are not mentioned in each case in this
manual.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Image file storage destinations
and image files
Image files recorded with your camera are grouped in folders by recording mode.
The meanings of the file names are as follows. ssss stands for any number
within the range from 0001 to 9999.
For Windows 98 users (The drive recognizing the camera is
“D.”)
Folder containing still image data
Folder containing E-MAIL mode and TIFF
mode image data
Folder containing moving image data
Folder containing VOICE mode audio data
Folder
File
Meaning
100msdcf
DSC0ssss.JPG
• Still image file recorded normally
• Still image file recorded in E-MAIL
mode (page 38)
• Still image file recorded in TIFF mode
• Still image file recorded in VOICE
mode (page 38)
TXT0ssss.GIF
DSC0ssss.JPG
DSC0ssss.TIF
• Still image file recorded in TEXT mode
Imcif100
• Small-size image file recorded in E-
MAIL mode (page 38)
• Uncompressed image file recorded in
TIFF mode (page 39)
Moml0001
Momlv100
MOV0ssss.MPG • Moving image file recorded normally
DSC0ssss.MPG
• Audio file recorded in VOICE mode
The numerical portions of the following files are the same.
— A small-size image file recorded in E-MAIL mode and its corresponding image file
— An uncompressed image file recorded in TIFF mode and its corresponding image file
— An audio file recorded in VOICE mode and its corresponding image file
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Before performing advanced
operations
This section describes the basic control methods that are frequently used for
How to use the MODE selector
The MODE selector selects whether you can use your camera to record or to play
back and edit images. Set the selector as follows before starting to operate your
camera.
PLAY
STILL
MOVIE
PLAY: To play back or edit images
STILL: To record still images and
voice memos
MOVIE: To record moving images
How to use the control button
The control button is used to select the indicators, images and menus appearing on
the LCD screen of your camera. The operation methods that are frequently used for
Select
Enter (OK)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning on/off the operation buttons (menu bar) on the LCD screen
Press v to display the menu bar
on the LCD screen.
Press V to clear the menu bar
from the LCD screen.
Menu bar
Note
Selecting items and images on the LCD screen
Press v/V/b/B on the
1
control button to select the
item you want to set or the
image you want to display.
The color of the selected item or
the border of the selected image
changes from blue to yellow.
Press the center z to enter
the item.
2
each function.
entering items by the above procedure as “Select [(item name)].”
31
Download from Www.Somanuals.com. All Manuals Search And Download.
How to change the menu settings
Some of the advanced operations for your camera are executed by selecting menu
items displayed on the LCD screen with the control button.
MODE selector
Press v on the control button to display the menu bar.
The menu bar appears as follows according to the setting of the MODE
selector.
1
MOVIE/STILL
PLAY (single mode)
PLAY (INDEX mode)
Select the desired item with v/V/b/B on the
control button, then press the center z.
The color of the selected item changes from blue to
yellow, and when you press the center z, the modes
that can be set for that item are displayed.
2
3
Select the desired mode with v/V/b/B on the control button, then
press the center z.
To clear the menu
Press V on the control button until the LCD screen returns to the menu bar display in
step 1. To clear the menu bar, press V again.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu settings
Menu items that can be modified differ depending on the setting of the MODE
selector. The LCD screen shows only the items you can operate at the moment. Initial
settings are indicated with x.
(SELF TIMER)
EFFECT
Item
Setting
Description
MODE
selector
P.EFFECT
B&W
STILL
SEPIA
NEG.ART
xOFF
DATE/
TIME
DAY&TIME Sets whether to insert the date and time STILL
into the image (page 44).
DATE
xOFF
FILE
Item
Setting
Description
MODE
selector
FORMAT
OK
Formats a “Memory Stick.”
MOVIE
STILL
PLAY
CANCEL
Cancels formatting of a “Memory
Stick.”
POS.
SENSOR
ON
Plays back images recorded with the
camera on its side (vertical images) as
horizontal images. This function does
not work for images recorded in TEXT
mode.
STILL
xOFF
When this camera may be subject to
vibration such as when you record
images from inside a moving car, set
this to OFF to prevent improper
horizontal/vertical judgement.
FILE
NUMBER
SERIES
Assigns numbers to files in sequence
even if the “Memory Stick” is changed.
MOVIE
STILL
xNORMAL Resets the file numbering each time the
“Memory Stick” is changed.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Setting
Description
MODE
selector
IMAGE
SIZE
2240×1680 Selects the image size when recording STILL
still images.
x1856×1392
1856 (3:2)
1280×960
640×480
320 (HQ)
320×240
Selects the MPEG image size when
recording moving images.
MOVIE
x160×112
REC MODE
TIFF
Records a TIFF (uncompressed) file in STILL
addition to the JPEG file.
TEXT
Records a GIF file in black-and-white.
VOICE
Records an audio file (with still image)
in addition to the JPEG file.
E-MAIL
Records a small-size (320×240) JPEG
file in addition to the selected image
size.
xNORMAL Records a JPEG file in the selected
image size.
REC TIME
SET
15 sec
10 sec
Adjusts the recording time for moving MOVIE
images.
x5 sec
ROTATE
(in single
mode only)
Rotates the still image.
PLAY
PLAY
—
SLIDE
INTERVAL Sets the slide show interval.
SHOW
(in single
mode only)
x3 sec/5 sec/10 sec/30 sec/1 min
REPEAT
START
Repeats the slide show.
xON/OFF
Starts the slide show.
CANCEL Cancels the slide show settings and
execution.
PRINT
MARK
ON
xOFF
ON
Marks the still images to be printed
PLAY
PLAY
Unmarks the print mark of the still
images.
PROTECT
Protects images against accidental
erasure (page 50).
xOFF
Releases protection of images against
accidental erasure.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
CAMERA
Item
Setting
Description
Uses digital zoom.
MODE
selector
DIGITAL
ZOOM
xON
OFF
STILL
Does not use digital zoom.
SHARPNESS +2 to –2
Adjusts the sharpness of the image.
appears on the LCD screen except
when set to 0.
STILL
STILL
FLASH
LEVEL
HIGH
Makes the flash level higher than
normal.
xNORMAL Normal setting.
LOW Makes the flash level lower than normal.
Adjusts the exposure.
EXPOSURE +2.0 EV to
–2.0 EV
MOVIE
STILL
TOOL
Item
Setting
Description
MODE
selector
COPY
OK
CANCEL
PLAY
Cancels copying of the image.
RESIZE
2240×1680 Changes the recorded still image size
PLAY
(in single
mode only)
1856×1392
1280×960
640×480
xCANCEL
SETUP
Item
Setting
Description
MODE
selector
DEMO
xON/STBY Displayed only when you use the AC
MOVIE
STILL
power adaptor in MOVIE or STILL
mode. When ON is selected, a
OFF
demonstration will start if you do not
operate your camera for about
10 minutes. To stop the demonstration,
turn off your camera. Select ON to make
the demonstration appear again.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Setting
Description
MODE
selector
VIDEO
OUT
NTSC
Sets the video output signal to NTSC
mode (North American countries, Japan,
etc.).
MOVIE
STILL
PLAY
PAL
Sets the video output signal to PAL
mode (European countries, etc.).
/
xENGLISH Displays the menu items in English.
MOVIE
STILL
PLAY
LANGUAGE
/JPN Displays the menu items in Japanese.
CLOCK
SET
—
MOVIE
STILL
PLAY
BEEP
SHUTTER Turns off the beep only. (The shutter
sound is heard when you press the
shutter button.)
MOVIE
STILL
PLAY
xON
Turns on the beep/shutter sound (when
you press the control button/shutter
button).
OFF
Turns off the beep/shutter sound.
LCD
BRIGHT
Adjusts the LCD screen brightness
using the +/– buttons on the LCD
screen. This has no effect on the
recorded images.
MOVIE
STILL
PLAY
INDEX*
DELETE
Setting
Description
Deletes the displayed image.
Cancels deleting of the image.
MODE selector
OK
CANCEL
PLAY
3 (RETURN)**
Returns to PLAY (single) mode.
∗ Displayed only in PLAY (single) mode.
∗∗Displayed only in PLAY (INDEX) mode.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
The number of images or the time
that you can record on a “Memory
Stick” (8 MB):
B
Various recording
Setting the image size
(IMAGE SIZE)
Image size Number of images or
time*
2240×1680
1856×1392
1856 (3:2)
1280×960
640×480
Approx. 4
Approx. 6
Approx. 6
Approx. 12
Approx. 118
1
2,3
320 (HQ) Approx. 20 (15**) sec.
320×240 Approx. 85 (15**) sec.
160×112 Approx. 345 (60**) sec.
1 Set the MODE selector to
MOVIE or STILL.
2 Select [FILE] and then
∗ When [REC MODE] is set to
[NORMAL].
[IMAGE SIZE] from the menu.
3 Select the desired image
∗∗Numbers in parentheses indicate the
maximum recording time during
continuous recording.
size.
Still image sizes
2240×1680, 1856×1392,
1856 (3:2)*, 1280×960, 640×480
∗ The image is recorded in 3:2 size to
match the printing paper size ratio of
3:2.
Moving image sizes
320 (HQ*), 320×240, 160×112
∗ High Quality mode
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording still
images for e-mail (E-
MAIL)
Adding audio files to
still images (VOICE)
1
3
E-MAIL mode records a small-size
(320×240) image at the same time as a
still image. Small-size images are
convenient for e-mail transmission, etc.
2
1
3
1 Set the MODE selector to
STILL.
2 Select [FILE], [REC MODE],
and then [VOICE] from the
menu.
2
1 Set the MODE selector to
3 Record the image.
STILL.
If you press and release the shutter
button, sound is recorded for
5 seconds.
2 Select [FILE], [REC MODE],
and then [E-MAIL] from the
menu.
If you hold down the shutter
button, sound is recorded until you
release the shutter button for up to
40 seconds.
3 Record the image.
The number of images that you can
record on a “Memory Stick” (8 MB)
in E-MAIL mode:
The number of images that you can
record on a “Memory Stick” (8 MB)
in VOICE mode (when recording
sound for five seconds):
Image size
2240×1680
1856×1392
1856 (3:2)
1280×960
640×480
Number of images
Approx. 4
Approx. 5
Image size
2240×1680
1856×1392
1856 (3:2)
1280×960
640×480
Number of images
Approx. 4
Approx. 5
Approx. 12
Approx. 95
Approx. 5
Approx. 5
Approx. 11
Approx. 56
To return to normal
recording mode
To return to normal
recording mode
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording text
Recording
uncompressed
images (TIFF)
documents (TEXT)
Text is recorded in black and white
GIF format to provide a clearer image.
This mode simultaneously records still
images in both TIFF format
(uncompressed) and JPEG format
(compressed).
1
3
1
3
2
2
1 Set the MODE selector to
STILL.
2 Select [FILE], [REC MODE],
and then [TEXT] from the
menu.
1 Set the MODE selector to
STILL.
2 Select [FILE], [REC MODE],
and then [TIFF] from the
menu.
3 Record the image.
The number of images that you can
record on a “Memory Stick” (8 MB)
in TEXT mode:
3 Record the image.
The number of images that you can
record on a “Memory Stick”
(16 MB) in TIFF mode:
Image size
2240×1680
1856×1392
1856 (3:2)
1280×960
640×480
Number of images
Approx. 10 to 110
Approx. 20 to 140
Approx. 20 to 160
Approx. 40 to 228
Approx. 160 to 727
Image size
1856×1392
1856 (3:2)
Number of images
Approx. 1
Approx. 1
To return to normal
recording mode
To return to normal
recording mode
Notes
Notes
• JPEG images are recorded in the image
size selected by the [IMAGE SIZE] menu.
TIFF images are recorded in [1856×1392]
size other than when [1856 (3:2)] is
selected.
• If the subject is not evenly illuminated, you
may be unable to record a clear image.
• Writing and reading data takes more time
than in normal recording.
• Writing data takes more time than in
normal recording.
• The supplied “Memory Stick” (8 MB)
does not have sufficient capacity to record
some image sizes.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording images in
macro
Focusing manually
Normally the focus is automatically
adjusted. This function is useful when
the auto focus does not work well such
as in dark places.
3
1
1
3
2
3
2
1 Set the MODE selector to
MOVIE or STILL.
1 Set the MODE selector to
2 Set FOCUS AUTO/MANUAL
MOVIE or STILL.
to AUTO.
2 Set FOCUS AUTO/MANUAL
to MANUAL.
3 Set the zoom to W side and
then press MACRO.
The
The 9 (manual focus) indicator
appears on the LCD screen.
(macro) indicator appears on
the LCD screen. You can shoot a
subject that is about 13/16 inches
(2 cm) away from the lens surface in
macro mode.
3 Turn the focus ring to achieve
a sharp focus.
When recording still images, the
LCD screen image is zoomed to
2×* and the focus mode indicator
is displayed. When a sharp focus is
achieved, the image returns to
normal and the 9 (manual focus)
indicator changes from yellow to
white. When recording moving
images, the image is not zoomed.
To return to normal
recording mode
Press MACRO again.
from the LCD screen.
disappears
Notes
• You cannot record images in macro with
the following PROGRAM AE modes.
— Landscape mode
— Panfocus mode
• You cannot record images in macro when
appears on the LCD screen.
• When you shoot a subject that is about
13/16 inches (2 cm) away from the lens
surface, the edges of the LCD screen
image may appear distorted.
You can adjust the focus distance
from 13/16 inches (2 cm) to ∞
(infinite).
∗ When using digital zoom, the LCD
screen image is zoomed to slightly
less than 2x.
To reactivate auto focusing
Set FOCUS AUTO/MANUAL to
AUTO.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• The focus mode indicator is approximate,
and should be used as a reference.
• The focus mode indicator is not displayed
correctly when using a conversion lens.
• When the zoom lever is set to the T side,
your camera may not focus on subjects
closer than about 2 5/8 feet (80 cm). In
these cases, the focus mode indicator
flashes. Move the zoom lever toward the W
side until the focus mode indicator stops
flashing.
Using the PROGRAM
AE function
1
2
+/–
• You cannot focus manually in PROGRAM
AE Panfocus mode.
1 Set the MODE selector to
MOVIE or STILL.
2 Press PROGRAM AE
repeatedly to select the
desired PROGRAM AE mode.
Aperture priority mode
Makes the subject stand out
against an unclear background or
makes both the subject and the
background stand out clearly.
Press +/– repeatedly to select an
aperture value in 7 steps from F2.8
to F8.
Shutter speed priority
mode
Records a sharp picture of a fast-
moving subject or the flow of
motion of a moving subject.
Press +/– repeatedly to select a
shutter speed in 19 steps from 8”
to 1/1000 when recording a still
image and in 13 steps from 1/8 to
1/1000 when recording a moving
image.
Twilight mode
Suppresses the washed-out color
of a bright subject in a dark place
so that you can record the subject
without losing the dark
atmosphere of the surroundings.
Twilight plus mode
Increases the effectiveness of the
twilight mode function.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Landscape mode
Focuses only on a distant subject
to record landscapes, etc.
Using the spot light-
metering mode
Panfocus mode
Use this mode when there is backlight
or when there is strong contrast
between the subject and the
background, etc.
Changes the focus quickly and
simply from a close subject to a
distant subject.
To cancel PROGRAM AE
1
Press PROGRAM AE repeatedly until
the indicator on the LCD screen goes
out.
Notes
2
• You cannot select F2.8 in aperture priority
mode when the zoom is set to the T side.
• You can focus only on distant subjects in
Landscape mode.
• In Panfocus mode, the zoom position and
focus are fixed.
• When you record in the Twilight plus
mode, we recommend that you use a tripod
to prevent shaking.
1 Set the MODE selector to
MOVIE or STILL.
2 Press SPOT METER to
display the spot light-
metering cross hair.
Position the point you want to
record on the spot light-metering
cross hair.
• Set the forced flash
when you use the
flash in the following modes:
–Twilight mode
–Twilight plus mode
LCD screen
–Landscape mode
• You cannot use the PROGRAM AE
function when [REC MODE] is set to
[TEXT].
• If the setting is not appropriate in aperture
priority mode and shutter priority mode,
the setting value indicator on the LCD
screen flashes when you press the shutter
button halfway down. In this case, reset the
value.
Spot light-metering
cross hair
• If you set a slow shutter speed in twilight
plus mode and shutter speed priority mode,
the noise may increase.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the
exposure
(EXPOSURE)
Adjusting the white
balance (WHITE
BALANCE)
Normally the white balance is
automatically adjusted.
1
1
2,3
2
1 Set the MODE selector to
MOVIE or STILL.
1 Set the MODE selector to
2 Select [CAMERA] and then
MOVIE or STILL.
[EXPOSURE] from the menu.
2 Press WHT BAL repeatedly to
select the desired white
balance mode.
3 Select the desired exposure
value.
Adjust the exposure value while
checking the brightness of the
background. You can select values
ranging from +2.0 EV to –2.0 EV
in steps of 1/3 EV.
One-push white balance
(
)
Adjusts the white balance
depending on the light source
OUT DOOR (
Recording a sunrise/sunset, night
scene, neon signs, or fireworks
)
Note
The exposure may not be adjusted properly
when the subject is extremely bright or dark,
or when using the flash.
IN DOOR (n)
• Places where the lighting
condition changes quickly
• Under bright lighting such as
photography studios
• Under sodium or mercury lamps
AUTO (No indicator)
Adjusts the white balance
automatically
43
Download from Www.Somanuals.com. All Manuals Search And Download.
To set the
(One-push
white balance) button
Recording the date
and time on the still
image (DATE/TIME)
1 Press WHT BAL repeatedly until
appears.
2 Place a white object such as paper
under the same light conditions as
you are going to record, and record
the white object so that it fills the
entire frame of your camera.
1
4
3 Press
.
2,3
The
indicator starts to flash
quickly. Once the white balance is
set, the indicator stops flashing.
1 Set the MODE selector to
To reactivate auto
adjustment
STILL.
2 Select [EFFECT] and then
[DATE/TIME] from the menu.
Notes
3 Select the date and time
• Select [AUTO] when recording under
fluorescent lighting.
setting.
• The
indicator means:
DAY&TIME
The date, hour and minutes are
imposed onto the image.
Slow flashing: white balance is not set.
Quick flashing: white balance is being
adjusted.
Lit steady: white balance has been set.
DATE
• If the
indicator keeps flashing even
The year, month and day are
imposed onto the image.
when you press
, record in automatic
white balance mode.
OFF
The date and time are not imposed
onto the image.
4 Record the image.
The date and time are not
displayed during recording.
The date and time are displayed
when playing back images.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying picture
effects (P.EFFECT)
1
2,3
1 Set the MODE selector to
MOVIE or STILL.
2 Select [EFFECT] and then
[P.EFFECT] from the menu.
3 Select the desired mode.
SOLARIZE
The light contrast is clearer and the
picture looks like an illustration.
B&W
The picture is monochrome (black
and white).
SEPIA
The picture is colored like an old
picture.
NEG.ART
The color and brightness of the
picture are reversed.
To cancel picture effect
45
Download from Www.Somanuals.com. All Manuals Search And Download.
To display the next
(previous) index screen
B
Various playback
Select v/V at the lower left of the LCD
screen.
Playing back six
images at once
(INDEX)
Displays the previous
index screen
Displays the next index
screen
1
To return to normal playback
(single image)
2
• Select the desired image with the
control button.
• Select [3] (RETURN).
1 Set the MODE selector to
PLAY.
Note
2 Select [INDEX] on the LCD
You cannot display images recorded in
TEXT mode on the INDEX screen.
screen.
Six images are displayed at once
(index screen).
This shows the position of the
currently displayed images relative
to all the recorded images.
The following marks are displayed
on each image according to the
image type and settings.
: Moving image file
: Voice memo file
: E-mail file
: Print mark
- : Protect mark
TEXT: Text mark
TIFF: TIFF mark
(No mark): Normal recording (no
settings)
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• You cannot trim images recorded in TEXT
mode or uncompressed images.
• The maximum zoom magnification is 5×
the original image, regardless of the image
size.
Enlarging a part of
the still image (Zoom
and trimming)
• The picture quality of trimmed images
may deteriorate.
• The original picture remains even after
trimming.
• The trimmed image is recorded as the
newest file.
1
3
2,4
1 Set the MODE selector to
PLAY.
2 Display the image to be
enlarged.
3 Zoom in/out the image with
the zoom lever.
The zoom scaling indicator
appears on the LCD screen.
4 Press the control button
repeatedly to select the
desired part of the image.
v: The image moves downward
V: The image moves upward
b: The image moves rightward
B: The image moves leftward
To return to the normal size
Zoom out with the zoom lever until the
zoom scaling indicator ( ×1.1)
disappears from the screen, or simply
press z.
To record an enlarged image
(trimming)
1Enlarge the image.
2Press the shutter button. The image
is recorded at 640×480 size, then the
display returns to the image display
before enlargement.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Rotating a still image
(ROTATE)
Playing back the
images in order
(SLIDE SHOW)
This function is useful for checking the
recorded images or for presentations,
etc.
1
2,3,4
1
1 Set the MODE selector to
PLAY.
2,3
2 Display the image to rotate.
3 Select [FILE] and then
1 Set the MODE selector to
[ROTATE] from the menu.
PLAY.
4 Rotate the image clockwise
2 Select [FILE] and then [SLIDE
SHOW] from the menu.
or counterclockwise
,
then select [RETURN].
Set the following items.
Notes
INTERVAL
• You may not be able to rotate images
1 min (one minute), 30 sec
(30 seconds), 10 sec (10 seconds),
5 sec (5 seconds), 3 sec
(3 seconds)
recorded with other equipment.
• Also, when viewing images on a personal
computer, the image rotation information
may not be reflected depending on the
application software.
• You cannot rotate protected or
uncompressed images, or images recorded
in TEXT mode.
REPEAT
ON: Plays back images in a
continuous loop until
[RETURN] is selected.
OFF: After all images have been
played back, the slide show
ends.
3 Select [START] with the
control button.
The slide show begins.
To cancel the slide show
To skip to the next/previous
image during slide show
playback
Select "b/B" at the lower left of the
LCD screen.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
The [INTERVAL] setting time is
approximate, and may vary depending on
the played back image size or other factors.
Viewing images on a
TV screen
Before connecting your camera, be
sure to turn off the TV.
Set the TV/VIDEO
switch to “VIDEO.”
to A/V OUT jack
A/V connecting
cable (supplied)
1 Connect the A/V connecting
cable to the A/V OUT jack of
your camera and to the
audio/video input jacks of the
TV.
If your TV has stereo type audio
input jacks, connect the audio plug
of the A/V connecting cable to the
Lch jack.
2 Turn on the TV, then start
playback on your camera.
The playback image appears on
the TV screen.
Note
You cannot use a TV that has an antenna
(aerial) connector only.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
The selected images are protected.
B
Editing
Preventing accidental
erasure (PROTECT)
The - (protect) indicator appears on
protected images.
To release protection
1
1,2,3
[OFF]. If you selected [SELECT] in
with the control button, then select
[ENTER].
In single mode
1 Set the MODE selector to
PLAY, then display the image
to protect.
2 Select [FILE], [PROTECT],
and then [ON] from the menu.
The displayed image is protected
and - appears.
To release protection
In INDEX mode
1 Set the MODE selector to
PLAY, then display the INDEX
screen.
2 Select [FILE], [PROTECT],
and then [ALL] or [SELECT]
from the menu.
3 When you select [ALL]
Select [ON].
All the images recorded in
“Memory Stick” are protected.
When you select [SELECT]
Select all the images to protect
with the control button, then select
[ENTER].
50
Download from Www.Somanuals.com. All Manuals Search And Download.
The
(delete) indicator appears
Deleting images
(DELETE)
on the selected images and these
images are deleted.
You cannot delete protected files.
1
1,2,3
To cancel deleting
Note
In single mode
If there are files on the “Memory Stick” with
names having the same last 4 digits as the
file name of the image to be deleted, these
files are also deleted at the same time.
1 Set the MODE selector to
PLAY, then display the image
to delete.
2 Select [DELETE] and then
[OK] from the menu.
The image is deleted.
In INDEX mode
1 Set the MODE selector to
PLAY, then display the INDEX
screen.
2 Select [DELETE] and then
[ALL] or [SELECT] from the
menu.
3 When you select [ALL]
Select [ENTER].
All unprotected images are
deleted.
When you select [SELECT]
Select all the images to delete with
the control button, then select
[ENTER].
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the
recorded still image
size (RESIZE)
Copying images
(COPY)
You can copy images to another
“Memory Stick.”
1
In single mode
1,2,3
1
1 Set the MODE selector to
PLAY and display the image
to resize.
1,2
2 Select [TOOL] and then
[RESIZE] from the menu.
1 Set the MODE selector to
PLAY, then display the image
to copy.
3 Select the desired image
size.
2240×1680, 1856×1392,
1280×960, 640×480
The changed image is recorded,
then the display returns to the
image display before resizing.
2 Select [TOOL], [COPY], and
then [OK] from the menu.
“MEMORY STICK ACCESS”
appears.
3 When “CHANGE MEMORY
STICK” appears, eject the
“Memory Stick.”
To return to the original size
“INSERT MEMORY STICK”
appears.
Notes
• You cannot change the size of images
recorded in TEXT mode or uncompressed
images.
• When you change from a small size to a
large size, the picture quality deteriorates.
• The original image is retained even after
resizing.
4 Insert the “Memory Stick” on
which to copy the image.
“RECORDING” appears. When
copying is completed,
“COMPLETE” appears.
To end copying, select [EXIT].
• The resized image is recorded as the
newest file.
To copy the image to
another “Memory Stick”
Select [CONTINUE] and repeat steps
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
In INDEX mode
• You cannot copy uncompressed images.
• You cannot copy images that are bigger
than 5 MB at once. If “NOT ENOUGH
MEMORY” appears or
flashes on the
INDEX screen, cancel some images to
copy and try again.
1
• After “COMPLETE” appears, if you
exchange the “Memory Stick” without
selecting “EXIT,” the same image is
copied again.
1,2,3,4
1 Set the MODE selector to
PLAY, then display the INDEX
screen.
2 Select [TOOL], [COPY], and
then [SELECT] from the
menu.
3 Select the image to copy.
The
(select) indicator appears
on the image.
4 Select [ENTER].
“MEMORY STICK ACCESS”
appears.
5 When “CHANGE MEMORY
STICK” is displayed, eject the
“Memory Stick.”
“INSERT MEMORY STICK”
appears.
6 Insert another “Memory
Stick.”
“RECORDING” appears. When
copying is completed,
“COMPLETE” appears.
To end copying, select [EXIT].
To copy the image to
another “Memory Stick”
Select [CONTINUE] and repeat steps
To cancel copying part-way
Change the MODE selector setting or
turn off the power.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Select [ENTER].
Selecting still images
to print (PRINT MARK)
of the selected images change
from green to white.
You can mark a print mark on still
images recorded with your camera.
This mark is convenient when you
have images printed at a shop that
conforms with the DPOF (Digital Print
Order Format) standard.
To unmark selected print
marks
Select the images to unmark in step 3
with the control button, then select
[ENTER].
1
1,2,3,4
To unmark all the print
marks
In single mode
Select [FILE], [PRINT MARK],
[ALL] and then [OFF] from the menu.
of all images are unmarked.
1 Set the MODE selector to
PLAY and display the image
you want to print.
Notes
• You cannot mark moving images or images
recorded in TEXT mode.
2 Select [FILE], [PRINT MARK],
and then [ON] from the menu.
• If you mark an image recorded in TIFF
mode with a print mark, only the
uncompressed image is printed, and the
JPEG image recorded at the same time is
not printed.
The
(print) mark is displayed
on the image.
To unmark the print mark
In INDEX mode
1 Set the MODE selector to
PLAY, then display the INDEX
screen.
2 Select [FILE], [PRINT MARK],
and then [SELECT] from the
menu.
3 Select the images to mark
with the control button.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
How to prevent moisture
condensation
When bringing the camera from a cold place
to a warm place, seal the camera in a plastic
bag and allow it to adapt to conditions at the
new location over a period of time (about an
hour).
Additional information
Precautions
On cleaning
Cleaning the LCD screen
Wipe the screen surface with a cleaning
cloth (not supplied) or a LCD cleaning kit
(not supplied) to remove fingerprints, dust,
etc.
If moisture condensation occurs
Turn off the camera and wait about an hour
for the moisture to evaporate. Note that if
you attempt to record with moisture
remaining inside the lens, you will be unable
to record clear images.
Cleaning the camera surface
Clean the camera surface with a soft cloth
slightly moistened with water, then wipe the
surface dry. Do not use any type of solvent
such as thinner, alcohol or benzene as this
may damage the finish or the casing.
On AC power adaptor
• Unplug the unit from the wall outlet
(mains) when you are not using the unit for
a long time.
• To disconnect the power cord (mains lead),
pull it out by the plug. Never pull the
power cord (mains lead) itself.
• Do not operate the unit with a damaged
cord or if the unit has been dropped or
damaged.
After using your camera at the
seashore or other dusty locations
Clean your camera carefully. Otherwise, the
salty air may corrode the metal fittings or
dust may enter the inside of your camera,
causing a malfunction.
• Do not bend the power cord (mains lead)
forcibly, or place a heavy object on it. This
will damage the cord and may cause fire or
electrical shock.
• Prevent metallic objects from coming into
contact with the metal parts of the
connecting section. If this happens, a short
may occur and the unit may be damaged.
• Always keep metal contacts clean.
• Do not disassemble the unit.
• Do not apply mechanical shock or drop the
unit.
Note on operating
temperature
Your camera is designed for use between the
temperatures of 32°F and 104°F (0°C and
40°C). Recording in extremely cold or hot
places that exceed this range is not
recommended.
On moisture condensation
• While the unit is in use, particularly during
charging, keep it away from AM receivers
and video equipment. AM reception and
video operation are disturbed.
• The unit becomes warm during use. This is
not a malfunction.
If the camera is brought directly from a cold
to a warm location, or is placed in a very
damp room, moisture may condense inside
or outside the camera. Should this occur, the
camera will not operate properly.
• Do not place the unit in locations that are:
—Extremely hot or cold
—Dusty or dirty
—Very humid
—Vibrating
Moisture condensation occurs
easily when:
• The camera is brought from a cold location
such as a ski slope into a warmly heated
room.
• The camera is taken from an air-
conditioned room or car interior to the hot
outdoors, etc.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
On battery pack
On “Memory Sticks”
• Use only the specified charger with the
charging function.
“Memory Stick” is a new compact, portable
and versatile IC recording medium with a
data capacity that exceeds a floppy disk.
“Memory Stick” is specially designed for
exchanging and sharing digital data among
“Memory Stick” compatible products.
Because it is removable, “Memory Stick”
can also be used for external data storage.
• To prevent accident from a short circuit, do
not allow metal objects to come into
contact with the battery terminals.
• Keep the battery pack away from fire.
• Never expose the battery pack to
temperatures above 140°F (60°C), such as
in a car parked in the sun or under direct
sunlight.
There are two types of “Memory Sticks”:
general “Memory Sticks” and “MagicGate
Memory Sticks” that are equipped with the
MagicGate* copyright protection
technology.
• Keep the battery pack dry.
• Do not expose the battery pack to any
mechanical shock.
• Do not disassemble nor modify the battery
pack.
You can use both types of “Memory Stick”
with your camera. However, because your
camera does not support the MagicGate
standards, data recorded with your camera is
not subject to MagicGate copyright
protection.
• Install the battery pack to the camera
securely.
• Charging while some capacity remains
does not affect the original battery
capacity.
If any problem occurs, unplug your camera
and contact your nearest Sony dealer.
∗ MagicGate is copyright protection
technology that uses encryption
technology.
On internal rechargeable
button battery
Notes
• Do not remove the “Memory Stick” while
reading or writing data.
This camera has an internal rechargeable
button battery for maintaining the date and
time and other settings regardless of whether
the power is on or off. This rechargeable
button battery is constantly charged as long
as you are using the camera. However, if
you use the camera for only short periods it
discharges gradually, and if you do not use
the camera at all for about half a year it
becomes completely discharged. In this
case, be sure to charge this rechargeable
button battery before using the camera.
However, even if this rechargeable button
battery is not charged, you can still use the
camera as long as you do not record the date
and time.
• Data may be damaged if:
—you remove the “Memory Stick” or turn
off your camera while reading or
writing data.
—you use the “Memory Stick” in a
location subject to the effects of static
electricity or noise.
• Do not attach any other material than the
supplied label on the labeling position.
• Attach the label so that it does not stick out
from the proper attachment location.
• When you carry or store the “Memory
Stick,” put it in its supplied case.
• Do not touch the terminals of a “Memory
Stick” with your hand or a metal object.
• Do not strike, bend or drop the “Memory
Stick.”
Charging method
• Do not disassemble or modify the
“Memory Stick.”
• Do not allow the “Memory Stick” to get
wet.
Connect the camera to a wall outlet (mains)
with the AC power adaptor/charger, or
install a charged battery pack, and leave the
camera for 24 hours or more with the
POWER switch set to OFF.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
“Memory Stick”,
Memory Stick” and
Sony Corporation.
, “MagicGate
are trademarks of
PAL system countries
Australia, Austria, Belgium, China,
Denmark, Finland, Germany, Great
Britain, Holland, Hong Kong, Italy,
Kuwait, Malaysia, New Zealand,
Norway, Portugal, Singapore, Spain,
Sweden, Switzerland, Thailand, etc.
“MagicGate” and
trademarks of Sony Corporation.
are
PAL-M system country
Brazil
Using your camera
abroad
PAL-N system countries
Argentina, Paraguay, Uruguay
Power sources
You can use your camera in any
country or area with the supplied
battery charger within 100 V to 240 V
AC, 50/60 Hz. Use a commercially
available AC plug adaptor [a], if
necessary, depending on the design of
the wall outlet (mains) [b].
SECAM system countries
Bulgaria, Czech Republic, France,
Guiana, Hungary, Iran, Iraq, Monaco,
Poland, Russia, Slovak Republic,
Ukraine, etc.
AC-VF10
Watching the playback picture on
TV
If you want to view the playback
picture on a TV, you need a TV having
a video input jack and a video
connecting cable.
The color system of the TV must be
the same as that of your digital still
camera. TV color systems differ from
country to country. Check the
following list:
NTSC system countries
Bahama Islands, Bolivia, Canada,
Central America, Chile, Columbia,
Ecuador, Jamaica, Japan, Korea,
Mexico, Peru, Surinam, Taiwan, the
Philippines, the U.S.A., Venezuela, etc.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you experience trouble with your camera, first check the following items. Should
your camera still not operate properly after you have made these checks, consult your
Sony dealer or local authorized Sony service facility. If code displays (C:ss:ss)
Symptom
Cause and/or Solution
Your camera does not
work.
• You are not using an “InfoLITHIUM” battery pack.
t
• The battery level is low (the E indicator appears
on the LCD screen).
t
• The AC power adaptor is not connected securely.
t
Connect it firmly to the battery terminal of your
camera and a wall outlet (mains) (page 12).
• The built-in microcomputer is not working
properly.
t
Disconnect and then reconnect all power
sources after one minute. Then turn the power
on by sliding the POWER switch to the right
and check that the camera works properly.
Your camera cannot
record images.
• The MODE selector is set to PLAY.
t
• No “Memory Stick” has been inserted into your
camera.
t
Insert a “Memory Stick” (page 15).
• The write-protect tab on the “Memory Stick” is set
to LOCK.
t
Set it to the recording position.
The picture is out of focus. • Your camera is not in macro recording mode when
you shoot a subject that is about 13/16 to
9 7/8 inches (2 to 25 cm) away from the lens.
t
t
Set the macro recording mode (page 40).
Set the zoom lever to set to the W side.
The resizing function does • You cannot resize moving images and text images.
not work.
You cannot display a print • You cannot display print marks on moving images
mark.
and text images.
The picture is noisy.
• Your camera is placed near a TV or other
equipment that uses strong magnets.
t
Move your camera away from the TV, etc.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause and/or Solution
The picture is too dark.
• You are shooting a subject with a light source
behind the subject.
t
t
Adjust the brightness of the LCD screen (page
The flash does not work.
• The flash is set to
.
t
Set the flash to auto (no indicator),
or
• PROGRAM AE is set to the Twilight, Twilight
plus, or Landscape mode.
t
.
• The MODE selector is set to MOVIE.
Set it to STILL.
• The flash is not popped up.
Pop up the flash (page 19).
• The date and time are not set correctly.
Set the correct date and time (page 13).
• The smear phenomenon is happening.
This is not a malfunction.
t
t
The date and time are
recorded incorrectly.
t
Vertical streaks appear
when you are shooting a
very bright subject.
t
The battery life is short.
• You are recording/playing back images under
extremely cold temperatures.
• The battery pack is not charged enough.
t
Charge the battery pack fully.
• The battery pack is dead.
t
Replace the battery pack with a new one (page
The battery remaining
indicator is incorrect.
• You have used the camera for a long time in an
extremely hot or an extremely cold location.
• The battery pack is dead.
t
Replace the battery pack with a new one (page
• The battery pack is discharged.
t
Sufficient battery
t
remaining indicator is
displayed but the power
runs out soon.
The zoom does not work.
• PROGRAM AE is set to the Panfocus mode.
Cancel the Panfocus mode (page 41).
t
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause and/or Solution
Digital zoom does not
function.
• You cannot use digital zoom to record moving
pictures.
Your camera cannot play
back images.
• The MODE selector is set to STILL or MOVIE.
t
The image and sound are
interfered by noise when
you play back an image on
a personal computer.
• You are playing back the file directly from the
“Memory Stick.”
t
Copy the file to the hard disk of the personal
computer and then play back the file from the
hard disk (page 28).
The image cannot be
played back on a personal
computer.
t
Consult the personal computer or software
manufacturer.
Your camera cannot delete • The image is protected.
an image.
t
The power turns off
suddenly.
• With the MODE selector set to STILL or MOVIE,
if you do not operate the camera for about three
minutes while the power is on, the camera turns off
automatically to prevent wearing down the battery.
t
Turn on the camera.
• The battery is discharged.
Replace it with a charged battery.
t
The image does not
• The video output signal setting of your camera is
appear on the TV screen.
incorrect.
t
Change the setting (page 36).
• The image size is larger than 2240×1680.
Use an image size of 2240×1680 or smaller.
• The camera is set to TEXT mode.
A file error occurs when
you play back a file.
t
The PROGRAM AE
function does not work.
t
The LCD screen freezes
momentarily.
• This is a characteristic of the system and is not a
malfunction.
The picture is
monochrome (black and
white).
• The camera is set to TEXT mode.
t
• P.EFFECT is set to B&W mode.
Cancel B&W mode (page 45).
t
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause and/or Solution
Your personal computer
does not recognize your
camera.
• The camera is turned off.
t
Turn on the camera.
• The battery level is low.
Use the AC power adaptor/charger (page 12).
• The USB cable is not connected firmly.
t
t
Disconnect the USB cable, and connect it again
firmly. Make sure that “PC MODE” is displayed
on the LCD screen (page 26).
• The USB connectors on your personal computer are
connected to other equipment besides the keyboard,
the mouse, and your camera.
t
Disconnect the USB cables except for the ones
connected to the keyboard, the mouse, and your
camera (page 25).
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and notice messages
Various messages appear on the LCD screen. Check the corresponding descriptions
in the following list.
Message
Meaning
NO MEMORY STICK
SYSTEM ERROR
MEMORY STICK ERROR
No “Memory Stick” has been inserted.
Turn the power off and on again.
The inserted “Memory Stick” cannot be
used with your camera, or is damaged.
FORMAT ERROR
Failed to format the “Memory Stick.”
MEMORY STICK LOCKED
The write-protect tab on the “Memory
Stick” is set to the LOCK position.
NO MEMORY SPACE
The capacity of the “Memory Stick” is
full, and you cannot record or copy
images.
NO FILE
No image has been recorded on the
“Memory Stick.”
FILE ERROR
An error occurred while playing back the
image.
FILE PROTECT
The image is protected against erasure.
for “InfoLITHIUM” battery only
The battery is not the “InfoLITHIUM”
type.
NOT ENOUGH MEMORY
DIRECTORY ERROR
IMAGE SIZE OVER
The images you want to copy are too big
to copy with your camera.
A directory with the same name already
exists.
You are playing back an image of a size
that cannot be played back with your
camera.
INVALID OPERATION
You are playing back a file that was
created on equipment other than your
camera.
E
The battery level is low or zero.
The image is protected.
-
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-diagnosis display
Your camera has a self-diagnosis display. This
function displays the camera condition on the
LCD screen with a combination of a letter and
four digits of numbers. If this occurs, check the
following code chart. The code informs you of the
camera’s current condition. The last two digits
(indicated by ss) will differ depending on the
state of the camera.
Self-diagnosis display
• C:ss:ss
You can reverse the camera
malfunction yourself.
• E:ss:ss
Contact your Sony dealer or local
authorized Sony service facility.
First three digits
Cause and/or Corrective Action
C:32:ss
• There is trouble with your camera’s hardware.
t
Turn the power off and on again.
• An unformatted “Memory Stick” is inserted.
Format the “Memory Stick” (page 33).
C:13:ss
t
• The inserted “Memory Stick” cannot be used with
your camera, or is damaged.
t
Insert a new “Memory Stick” (page 15).
E:61:ss
• A camera malfunction that you cannot reverse has
E:91:ss
occurred.
t
Contact your Sony dealer or local authorized
Sony service facility and inform them of the 5-
digit service code. (example: E:61:10)
If you are unable to solve the problem even after trying the corrective
actions a few times, contact your Sony dealer or local authorized Sony
service facility.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
Image device
1/1.8 type color CCD
General
Used battery pack
NP-FS11
NP-FS11 battery pack
Used battery
Lithium ion battery
Maximum voltage
DC 4.2 V
Lens
5× zoom lens
Power requirements
3.6 V
f = 7.1 – 35.5 mm
(38 – 190 mm when converted
into a 35 mm still camera)
F = 2.8 – 3.3
Exposure control
Automatic exposure
White balance
Automatic, Indoor, Outdoor,
One-push
Power consumption
(during recording)
3.3 W
Operation temperature
32°F to 104°F
(0°C to 40°C)
Storage temperature
–4°F to +140°F
(–20°C to +60°C)
Maximum dimensions
Approx.
4 1/4×2 1/2×5 3/8 inches
(107×62×136 mm) (w/h/d)
Mass
Approx. 1 lb (475 g)
(including battery pack NP-
FS11, “Memory Stick,” lens
cap, etc.)
Nominal voltage
DC 3.6 V
Capacity
4.1 Wh (1 140 mAh)
Accessories
A/V connecting cable (1)
NP-FS11 battery pack (1)
AC-VF10 AC power adaptor/
charger (1)
Data system
Movie: MPEG1
DK-115 DC connecting cable
(1)
Power cord (1)
USB cable (1)
Lens cap (1)
Lens cap strap (1)
Wrist strap (1)
“Memory Stick” (8 MB) (1)
CD-ROM (1)
Still: JPEG, GIF (in TEXT
mode), TIFF
Audio with still image:
MPEG1 (Monaural)
Recording medium
“Memory Stick”
Flash
Recommended recording
distance:
Built-in microphone
Electret condenser microphone
Built-in speaker
Dynamic speaker
Operating Instructions (1)
11 7/8 inches to 8 1/4 feet
(0.3 m to 2.5 m)
Design and specifications are
subject to change without
notice.
Output connector
A/V OUT (Monaural)
Minijack
Video: 1 Vp-p, 75 Ω,
unbalanced, sync negative
Audio: 327 mV (at a 47 kΩ
load)
Output impedance: 2.2 kΩ
Digital I/O (USB)
Special minijack
External flash jack
Minijack
AC-VF10 AC power
adaptor/charger
Power requirements
100 to 240 V AC, 50/60 Hz
Rated output voltage
DC OUT: DC 4.2 V, 1.8 A in
operating mode
Battery charge terminal:
DC 4.2 V, 1.5 A in charge
mode
Operation temperature
32°F to 104°F (0°C to 40°C)
Storage temperature
–4°F to +140°F
LCD screen
Used LCD panel
2 type TFT (Thin Film
Transistor active matrix) drive
Total number of dots
123 200 (560 ×220) dots
(–20°C to +60°C)
Maximum dimensions
1 15/16×1 9/16×3 3/8 inches
(49×39×85 mm) (w/h/d)
Mass
Approx. 4.2 oz (120 g)
64
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD screen indicators
The indicators during recording
1856
A Battery remaining indicator
J Self-diagnosis function/
recording time indicator
B PROGRAM AE/flash mode/
flash level indicator
K Number of recorded images
C White balance/EV level/
L Remaining memory capacity
sharpness indicator
indicator
D Picture effect indicator
M Moving image/VOICE recording
time indicator
E Date/time indicator
N Self-timer indicator
F Aperture/shutter speed
indicator
O Spot light-metering indicator
P Focus/macro mode indicator
Q Menu bar and guide menu
G AE lock/focus lock indicator
H Recording mode indicator
I Image size indicator
They appear by pressing v on the
control button and disappear by
pressing V of it.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
When playing back still images
60
A Protect indicator
B Print mark indicator
C File name
G Number of stored images in
“Memory Stick”
H Remaining memory capacity
indicator
D Recording mode indicator
E Image size indicator
F Image number
I Recording date of the playback
image/menu bar and guide
menu
When playing back moving images
45
6
7
60min
320
6/8
0:12
VOL.
1
8
2
9
0
3
INDEX DELETE FILE
TOOL SETUP
MENU BAR OFF
qa
SELECT
OK
A VOL. (Volume) indicator
F Image number/number of
stored images in “Memory
Stick”
B Playback/pause buttons
B: during pause
G Remaining memory capacity
X: during playback
indicator
C Fast-forward/rewind buttons
D Recording mode indicator
E Image size indicator
H Counter
I Playback image
J Play bar
K Menu bar and guide menu
66
Download from Www.Somanuals.com. All Manuals Search And Download.
M
S
“Memory Stick”
SHARPNESS................... 35
Shutter speed priority
Index
A
number of images that
Aperture priority mode .... 41
Moisture condensation..... 55
Moving images
Spot light-metering
Still images
B
Battery pack
remaining battery
N
T
Number of images that you
can record
C
U
Using the self-timer ......... 19
Using your camera
D
P
V
P.EFFECT........................ 45
Playing back
Viewing images
using a personal
E
Editing
Playing back six images
Power supply
Preventing accidental
PROTECT........................ 50
preventing accidental
W
Warning and notice
Enlarging a part of the
WHITE BALANCE......... 43
Z
Zoom................................ 17
F
Q
Focusing manually........... 40
R
Recording
I
still images for e-mail.. 38
“InfoLITHIUM” battery
J
L
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation Printed in Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
|