4-111-863-11(1)
Digital HD Video Camera Recorder
Operating Guide
HDR-FX1000E
Additional information on this product and answers
to frequently asked questions can be found at our
Customer Support Website.
http://www.sony.net/
Printed on 70% or more recycled paper
using VOC (Volatile Organic Compound)
-free vegetable oil based ink.
Printed in Japan
© 2008 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first
using connection cables shorter than 3 meters (9.8
feet).
Before operating the unit, please read this
manual thoroughly, and retain it for future
reference.
Notice
If static electricity or electromagnetism causes
data transfer to discontinue midway (fail), restart
the application or disconnect and connect the
communication cable (i.LINK, etc.) again.
WARNING
To reduce fire or shock hazard, do
not expose the unit to rain or
moisture.
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Notice for the customers in the
countries applying EU Directives
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-
0075 Japan. The Authorized Representative for
EMC and product safety is Sony Deutschland
GmbH, Hedelfinger Strasse 61,70327 Stuttgart,
Germany. For any service or guarantee matters
please refer to the addresses given in separate
service or guarantee documents.
Do not expose the batteries to excessive
heat such as sunshine, fire or the like.
CAUTION
Replace the battery with the
specified type only. Otherwise, fire
or injury may result.
Disposal of Old Electrical
& Electronic Equipment
(Applicable in the
European Union and other
European countries with
separate collection
systems)
Notice for customers in the
United Kingdom
A moulded plug complying with BS1363 is fitted
to this equipment for your safety and
convenience.
This symbol on the product or on its packaging
indicates that this product shall not be treated as
household waste. Instead it shall be handed over
to the applicable collection point for the recycling
of electrical and electronic equipment. By
Should the fuse in the plug supplied need to be
replaced, a fuse of the same rating as the supplied
one and approved by ASTA or BSI to BS1362
(i.e., marked with
or
mark) must be used.
ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
for the environment and human health, which
could otherwise be caused by inappropriate waste
handling of this product. The recycling of
If the plug supplied with this equipment has a
detachable fuse cover, be sure to attach the fuse
cover after you change the fuse. Never use the
plug without the fuse cover. If you should lose the
fuse cover, please contact your nearest Sony
service station.
materials will help to conserve natural resources.
For more detailed information about recycling of
this product, please contact your local Civic
Office, your household waste disposal service or
the shop where you purchased the product.
FOR CUSTOMERS IN EUROPE
ATTENTION
Applicable Accessory: Remote Commander
The electromagnetic fields at the specific
frequencies may influence the picture and sound
of this unit.
This product has been tested and found compliant
with the limits set out in the EMC Directive for
2
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
(“Memory Stick Duo”)
(“Memory Stick
Disposal of waste
batteries (applicable in
the European Union and
other European countries
with separate collection
systems)
PRO Duo”)
–
(“Memory Stick
PRO-HG Duo”)
“Memory Stick Duo”
(This size can be used with your camcorder.)
This symbol on the battery or on the packaging
indicates that the battery provided with this
product shall not be treated as household waste.
By ensuring these batteries are disposed of
correctly, you will help prevent potentially
negative consequences for the environment and
human health which could otherwise be caused by
inappropriate waste handling of the battery. The
recycling of the materials will help to conserve
natural resources.
“Memory Stick”
(You cannot use with your camcorder.)
In case of products that for safety, performance or
data integrity reasons require a permanent
connection with an incorporated battery, this
battery should be replaced by qualified service
staff only.
To ensure that the battery will be treated properly,
hand over the product at end-of-life to the
applicable collection point for the recycling of
electrical and electronic equipment.
For all other batteries, please view the section on
how to remove the battery from the product
safely. Hand the battery over to the applicable
collection point for the recycling of waste
batteries.
For more detailed information about recycling of
this product or battery, please contact your local
Civic Office, your household waste disposal
service or the shop where you purchased the
product.
• You cannot use any type of memory card
except “Memory Stick Duo.”
• “Memory Stick PRO Duo” can be used
only with “Memory Stick PRO”
compatible equipment.
• Do not attach a label or the like on a
“Memory Stick Duo” or a “Memory Stick
Duo” Adaptor.
When using a “Memory Stick Duo”
with “Memory Stick” compatible
equipment
Be sure to insert the “Memory Stick Duo”
into the “Memory Stick Duo” Adaptor.
“Memory Stick Duo” Adaptor
Notes on use
Types of cassette you can use in your
camcorder
You can use mini DV cassettes marked
with
. Your camcorder does not
support the Cassette Memory function
Types of “Memory Stick” you can use
in your camcorder
You can use “Memory Stick” that have the
Continued ,
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first (Continued)
results of the manufacturing process and
do not affect the recording in any way.
Using the camcorder
• Do not hold the camcorder by the
following part.
Lens hood
Viewfinder
with lens cover
Black point
White, red, blue
or green points
About temperature of your camcorder
and battery pack
LCD panel
Microphone
• Your camcorder has a protective function
that disables recording or playback if the
temperature of your camcorder or battery
pack is beyond the safely operable range.
In this case, a message appears on the
b Notes
• The camcorder is not dustproof, dripproof
or waterproof.
• Do not connect cables to your camcorder
with their terminals placed the wrong
way. Squeezing the terminals into your
camcorder's jacks may damage them or
results in a malfunction of your
camcorder.
Do not expose your camcorder’s
viewfinder, lens, or LCD screen to the
sun or strong light source for extended
periods.
• Intense light sources, especially the sun
will converge on the viewfinder or lens
and damage the internal parts of your
camcorder. Avoid sunlight or other strong
light sources when storing your
About menu items, LCD panel,
viewfinder, and lens
• A menu item that is grayed out is not
available under the current recording or
playback conditions.
• The LCD screen and the viewfinder are
manufactured using extremely high-
precision technology, so over 99.99% of
the pixels are operational for effective
use. However, there may be some tiny
black points and/or bright points (white,
red, blue, or green in color) that appear
constantly on the LCD screen and the
viewfinder. These points are normal
camcorder. Protect this device by always
closing the lens cover or by placing it in
its bag when not in use.
On recording
• Before starting to record, test the
recording function to make sure the
picture and sound are recorded without
any problems.
• Compensation for the contents of
recordings cannot be provided, even if
4
Download from Www.Somanuals.com. All Manuals Search And Download.
recording or playback is not possible due
to a malfunction of the camcorder, storage
media, etc.
• TV color systems differ depending on the
countries/regions. To view your
recordings on a TV, you need a PAL
system-based TV.
language before using your camcorder if
• Design and specifications of recording
media and other accessories are subject to
change without notice.
• Television programs, films, video tapes,
and other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the copyright laws.
• Because of the way that the image device
(CMOS sensor) reads out image signals,
the subjects passing by the frame rapidly
might appear crooked depending on the
recording conditions. This phenomenon
may be notable in displays having high
motion resolution.
On playing back HDV tapes on other
devices
You cannot play back a tape recorded in the
HDV format on DV format video cameras
or on mini DV players.
Check the contents of tapes by playing
them back on this camcorder prior to
playing them back on other devices.
Note on the icons used in this manual
Features available for the HDV
format only
Features available for the DV
format only
This function that can be used when
i.LINK cable is connected.
The function that can be assigned to
an ASSIGN button.
About this manual
• The images of the LCD screen and the
viewfinder used in this manual for
illustration purposes are captured using a
digital still camera, and therefore may
appear different.
• The on-screen displays in each local
language are used for illustrating the
operating procedures. Change the screen
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Read this first ........................................................................................... 2
Searching for the last scene of the most recent recording
Playback ................................................................................................ 46
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings to adjust your camcorder to the recording conditions (GAIN SETUP/
Continued ,
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents (Continued)
Specifications ....................................................................................... 114
Index .................................................................................................... 126
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying pictures with high definition quality
Trying out the new HDV format!
High image quality
Being HDV format compliant, your camcorder is ready to shoot crystal clear, high-definition
images.
What is the HDV format?
The HDV format is a video format for shooting and playing back high definition images on
popular DV standard cassette tapes.
• Your camcorder adopts the HDV1080i
specification, which utilizes 1,080 effective
scanning lines, within the HDV standards, and
records pictures at the image bit rate of about 25 Mbps.
1,080 effective
scanning lines
• These operating instructions refer to the HDV1080i specification as HDV format unless there is a need
to specify.
Why shoot in the HDV format?
By moving to digital video, like the rest of the world, you will be able to capture important
moments in your life in high quality digital HDV format, allowing you to relive them.
Your camcorder’s down convert function converts pictures in HDV format to SD (standard
definition) quality for viewing on older wide TV formats, and on 4:3 aspect ratio TVs when
a high definition TV set is not available. This provides an easy path to HDV format video.
• The down convert function converts HDV format video to DV for playback or editing when your
camcorder is connected to a TV or VCR that is not HDV1080i compliant. The resulting image is
displayed in SD (standard definition).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Features of this camcorder
The HDV1080i specification digital HD video camera recorder has the following features to
enable you to record beautiful scenery while traveling, etc., in high definition quality.
13-ClearVid CMOS sensor system installed
This camcorder is fitted with the 3-ClearVid CMOS sensor system. Superb spectroscopic
characteristics and high definition are achieved by the use of three ClearVid CMOS sensors
developed by Sony for high definition, enabling reproduction of digital high definition with
excellent sensitivity and color reproducibility.
220 × optical zoom G Lens installed
The 20 × optical zoom G Lens enables you to zoom-in on distant objects and record in high
definition quality.
3Realistic sound recording with built-in high performance microphone
The high performance stereo microphone built into this camcorder enables highly realistic
sound recording.
4Detailed manual settings for serious filming
Extensive manual setting functions allow you to shoot high definition videos with customized
settings.
- The zoom ring, focus ring and iris ring provide full manual control.
- You can manually fine-adjust the shutter speed, white balance and gain.
5Connecting to other devices
Superb external connectability is provided by an i.LINK (HDV/DV) jack, an A/V Remote
Connector (for component A/V cable, A/V connecting cable with S VIDEO and A/V
connecting cable), an HDMI OUT jack, a LANC jack and a headphone jack on the rear of
your camcorder, and a “Memory Stick Duo” slot on the right side.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Handy Functions for Recording
You can record 1.2M still images on the “Memory Stick Duo” during recording movie.
Moving subjects can be shot in smooth moving slow-motion.
Two settings profiles, including brightness, color, etc., can be saved in your camcorder. This
enables you to use saved settings data to quickly reproduce suitable shooting settings.
You can adjust the brightness using the iris ring. You can select either [IRIS] or
[EXPOSURE] for the brightness adjustment with the iris ring.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing video recorded in the HDV format!
Pictures recorded in the HDV format can be played back as crisp HD (high definition)
picture on a high definition TV.
Your camcorder can down convert video recorded in the HDV format to SD (standard
definition) quality for playback on a conventional TV.
x Connecting to an HDV1080i specification
An optional i.LINK cable allows you to copy pictures in HD (high definition) quality.
x Connecting to HDV1080i non-compliant specification
Use your camcorder to convert HDV format video to SD (standard definition) quality to
enable copying.
x Copying movie from tape to a computer
You can copy movie to a computer, and save to DVD from copying movie.
The computer will need to be set up differently depending on whether HDV or DV format
12
Download from Www.Somanuals.com. All Manuals Search And Download.
GSetttiengpSta1rte:d Checking supplied items
Make sure that you have following items
supplied with your camcorder.
The number in the parentheses indicates the
number of that item supplied.
• The cassette tape and “Memory Stick Duo” are
types of cassette tapes and “Memory Stick Duo”
that you can use on your camcorder.
Rechargeable battery pack NP-F570 (1)
This lens hood is pre-mounted.
Wireless Remote Commander (1)
Operating Guide (This manual) (1)
A button-type lithium battery is already installed.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Attaching the lens hood with lens cover
To open or close the shutter of the
Lens hood with lens cover
Move the lens cover lever up or down to
open or close the lens cover.
Move the lens cover lever to OPEN to
open the lens cover, and move the
lever to CLOSE to close the lens
cover.
PUSH (lens hood release) button
Align the marks on the lens hood to those
on the camcorder, and turn the lens hood in
the direction of the arrow 2.
To remove the Lens hood with lens
cover
Turn the lens hood in the opposite direction
to the arrow 2in the illustration while
pressing the PUSH (lens hood release)
button.
z Tips
• If you attach or remove a 72mm (2 7/8 in.) PL
filter or MC protector, remove the lens hood
with lens cover.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Charging the battery pack
You can charge the “InfoLITHIUM”
2
With the B mark on the DC plug
battery pack (L series) with the
supplied AC Adaptor.
facing outwards, connect the DC
plug to the DC IN jack on your
camcorder.
b Notes
• You cannot use batteries other than the
“InfoLITHIUM” battery pack (L series)
B mark
DC plug
DC IN jack
3
4
Connect the power cord (mains
lead) to the AC Adaptor.
To the wall outlet
(wall socket)
AC Adaptor
Connect the power cord (mains
lead) to the wall outlet (wall
socket).
Power cord (mains lead)
1
Press the battery pack against the
back of your camcorder and slide
it down.
5
Set the POWER switch to
OFF (CHG).
The CHG lamp lights up and charging
starts.
Continued ,
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Charging the battery pack (Continued)
After charging the battery
Recording time
The CHG lamp turns off when the battery is
fully charged. Disconnect the AC Adaptor
from the DC IN jack.
Approximate time (min.) available when
you use a fully charged battery pack.
b Notes
z Tips
• You cannot use the NP-F330 battery pack with
this camcorder.
• You can check the remaining battery life with
Recording in the HDV format
To remove the battery pack
Set the POWER switch to OFF (CHG).
Push the BATT RELEASE (battery release)
button and remove the battery pack.
Continuous
recording
time
Typical
recording
time*
Battery pack
NP-F570
(supplied)
140
145
295
305
445
460
70
70
NP-F770
145
150
220
230
NP-F970
Recording in the DV format
Continuous
recording
time
Typical
recording
time*
Battery pack
BATT RELEASE
(battery release) button
NP-F570
(supplied)
145
155
305
315
460
475
70
75
To store the battery pack
NP-F770
150
155
230
235
If the battery pack will not be used for a
while, run down the battery and store it. See
page 108 for details on storage of the
battery pack.
NP-F970
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Top:
When the LCD backlight turns on.
Bottom: Recording time when recording with
the viewfinder while the LCD panel is
closed.
* Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
Battery pack
NP-F570 (supplied)
NP-F770
Charging time
260
370
485
NP-F970
16
Download from Www.Somanuals.com. All Manuals Search And Download.
• The recording and playback time will be shorter
when you use your camcorder in low
temperatures.
• The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.
Playing time
Approximate time (min.) available when
you use a fully charged battery pack.
HDV format pictures
LCD panel
opened*
LCD panel
Battery pack
closed
Using an outside power source
NP-F570
200
210
(supplied)
You can use the AC Adaptor to obtain AC.
While you are using the AC Adaptor, the
battery pack will not lose its charge even
when it is attached to your camcorder.
NP-F770
NP-F970
415
630
435
660
DV format pictures
Connect your camcorder as shown
in Step3:Charging the battery pack
LCD panel
opened*
LCD panel
closed
Battery pack
NP-F570
220
230
(supplied)
NP-F770
NP-F970
445
675
470
705
On the AC Adaptor
• Use the nearby wall outlet (wall socket) when
using the AC Adaptor. Disconnect the AC
Adaptor from the wall outlet (wall socket)
immediately if any malfunction occurs while
using your camcorder.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
• Do not short-circuit the DC plug of the AC
Adaptor or battery terminal with any metallic
objects. This may cause a malfunction.
* When the LCD backlight turns on.
On the battery pack
• Before changing the battery pack, set the
POWER switch to OFF (CHG).
• The CHG lamp flashes during charging, or
displayed under the following conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
• Even if your camcorder is turned off, AC power
(mains) is still supplied to it while connected to
the wall outlet (wall socket) via the AC Adaptor.
– The battery pack is worn-out (For Battery
Info only).
– The battery pack is too cold.
Replace the battery pack, or remove it and put
it in a warm place.
– The battery pack is too hot.
Replace the battery pack, or remove it and put
it in a cool place.
• The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder, even when the
power cord (mains lead) is disconnected from
the wall outlet (wall socket).
On the charging/recording/playback time
• Times measured with the camcorder at 25 °C
(77 °F). 10 °C to 30 °C (50 °F to 86 °F) is
recommended.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Turning the power on and holding your
camcorder properly
To record or play back, set the POWER
switch to the respective direction.
When you use your camcorder for the first
time, the [CLOCK SET] screen appears
2
Hold the camcorder properly.
POWER switch
3
Ensure a good grip, then fasten
the grip belt.
1
While pressing the green button,
slide the POWER switch.
Press and hold the
green button when
you slide the
POWER switch
from OFF (CHG).
CAMERA: To record pictures.
VCR: To play or edit pictures.
b Notes
• The current date and time appear on the LCD
screen for a few seconds when you turn on your
camcorder once you set the date and time
To turn off the power
Slide the POWER switch to OFF (CHG).
b Notes
• If warning messages appear on the screen,
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Adjusting the LCD panel and viewfinder
The LCD panel
The viewfinder
Open the LCD panel 180 degrees (1), then
rotate it to the best angle to record or play
back (2).
You can view pictures using the viewfinder
to save the battery, or when the picture on
the LCD screen is not clear.
Viewfinder lens
adjustment lever
Move it until the picture
becomes clear.
1Open 180 degrees.
290 degrees
(max.)
2180 degrees
(max.)
b Notes
• You may see primary colors shimmering in the
viewfinder when you move your eye line. This
is not a malfunction. The shimmering colors
will not be recorded on the recording media.
DISPLAY/BATT INFO button
z Tips
• You can see your mirror image on the LCD
screen by setting the LCD panel facing you. The
image will be recorded in a normal image.
z Tips
• You can adjust the brightness of the viewfinder
• To display images both on the LCD display and
in the viewfinder, set [VF POWERMODE] to
To turn off the LCD backlight to make
the battery last longer
Press and hold the DISPLAY/BATT INFO
button for a few seconds until
appears.
This setting is practical when you use your
camcorder in bright conditions or when you
want to save battery power. The recorded
picture will not be affected by the setting.
To turn on the LCD backlight, press the
DISPLAY/BATT INFO button.
disappears.
z Tips
• You can adjust the brightness of the LCD screen
Continued ,
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Adjusting the LCD panel and viewfinder (Continued)
When the picture in the viewfinder is
hard to see
If you cannot see the picture in the
viewfinder clearly under bright
circumstances, use the supplied large
eyecup. To attach the large eyecup, stretch
it slightly and align it with the eyecup
groove in the viewfinder. You can attach
the large eyecup facing either the right or
left side.
b Notes
• Do not remove the pre-attached eyecup.
Large eyecup (supplied)
Attach with the
protruding part
at the top.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6: Setting the date and time
Set the date and time when using this
camcorder for the first time. If you do not
2
3
4
Select
(OTHERS) by turning
set the date and time, [CLOCK SET] screen
appears every time you turn on your
camcorder or change the POWER switch
positions.
the SEL/PUSH EXEC dial, then
press the dial.
OTHERS
RETURN
CAMERA PROF.
ASSIGN BTN
z Tips
PHOTO/EXP.FOCUS --:--:--
• If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the rechargeable battery and then set the
CLOCK SET
WORLD TIME
LANGUAGE
QUICK REC
[
]
MENU :END
Select [CLOCK SET] by turning
the SEL/PUSH EXEC dial, then
press the dial.
-:--:--
CLOCK SET
Y
M
D
2008
-
1
-
1
0 : 00
[
]
MENU :CANCEL
Set [Y] (year) by turning the SEL/
PUSH EXEC dial, then press the
dial.
SEL/PUSH EXEC dial MENU button
You can set any year up to the year
2079.
Skip to step 4 when you set the clock for
the first time.
-:--:--
CLOCK SET
Y
M
D
1
Press the MENU button.
1
1
0 : 00
2008
-
-
[
]
MENU :CANCEL
PROG. SCAN
IRIS/EXPOSURE
GAIN SETUP
AGC LIMIT
MINUS AGC
WB PRESET
AWB SENS
5
Set [M] (month), [D] (day), hour
and minute, then press the dial.
The clock starts.
Continued ,
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6: Setting the date and time (Continued)
z Tips
• The date and time are automatically recorded on
the tape, and can be displayed during playback
Changing the language setting
You can change the on-screen displays to
show messages in a specified language.
Press the MENU button to select the
(OTHERS) with the SEL/PUSH EXEC
dial.
Select the screen language in
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 7: Inserting a tape or a “Memory Stick Duo”
The cassette compartment automatically
slides back in.
Cassette tape
You can use mini DV
cassettes only
b Notes
• Do not push the portion marked
while the cassette
{DO NOT PUSH}
compartment is sliding in. Doing so may
cause a malfunction.
1
Slide and hold the
EJECT lever in the direction of the
arrow and open the lid.
OPEN/
3
Close the lid.
OPEN/EJECT
lever
z Tips
• The recordable time varies depending on [DV
To eject the cassette
Open the lid following the same procedure
as described in step 1 and remove the
cassette.
“Memory Stick Duo”
Lid
You can use only a “Memory Stick Duo”
marked with
,
The cassette compartment automatically
comes out.
or
2
Insert a cassette with its window
facing outwards, then press
.
1
Open the “Memory Stick Duo”
slot cover in the direction of the
arrow.
Push the center of
the back of the
cassette lightly.
Window
“Memory Stick Duo” slot cover
Cassette compartment
Continued ,
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 7: Inserting a tape or a “Memory Stick Duo” (Continued)
2
Insert the “Memory Stick Duo”
into the “Memory Stick Duo” slot
in the right direction until it clicks.
Access lamp
b Notes
• If you insert the “Memory Stick Duo” into
the slot in the wrong direction, the “Memory
Stick Duo,” the “Memory Stick Duo” slot,
or image data may be damaged.
To eject a “Memory Stick Duo”
Lightly push the “Memory Stick Duo”
once.
b Notes
• When the access lamp is lit or flashing, your
camcorder is reading/writing data. Do not shake
or knock your camcorder, turn the power off,
eject the “Memory Stick Duo,” or remove the
battery pack. Otherwise, image data may be
damaged.
• When inserting or ejecting the “Memory Stick
Duo,” be careful with the “Memory Stick Duo”
from popping out and dropping.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording/Playback
Recording
Recording lamp
REC START/STOP button B
PHOTO/EXPANDED
FOCUS button
Lens hood with lens cover
Recording lamp
POWER switch
REC START/STOP
button A
Your camcorder records movies on tape and still images on “Memory Stick Duo.” Do the
following steps to record movies.
z Tips
• This camcorder can record movies in HDV or DV format. The factory setting is HDV format ([REC
1
2
Open the shutter of the lens hood.
Slide the POWER switch to CAMERA while pressing the green button.
Slide the POWER
switch while pressing
the green button.
Continued ,
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording (Continued)
3
Press the REC START/STOP button A(or B).
60min
REC
60min
[STBY] t [REC]
The recording lamp lights up during recording.
To stop the movie recording, press the REC START/STOP button again.
z Tips
• When recording in HDV format, the aspect ratio is fixed to 16:9. When recording in DV format, you
• You cannot record movies on a “Memory Stick Duo.”
• For low angle recording, the REC START/STOP button on the handle is convenient. Release the
HOLD lever to enable the REC START/STOP button. It might be helpful if you set the LCD panel
face up or close it after turning it face down, or lift the viewfinder up during the low angle recording.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
To capture still images
Press the PHOTO/EXPANDED FOCUS
button or the PHOTO button on the Remote
Commander.
A still image will be recorded on the
“Memory Stick Duo.”
the recording is completed.
You can capture still images during movie
recording.
Capacity of the “Memory Stick Duo”
(MB) and the number of recordable
pictures
1.2M
1440
810
0.9M
1080 × 640 ×
810 480
VGA
0.2M
640 ×
360
×
disappears when
1.2M
512MB
1GB
770
1000
2100
2900
6000
3650
7500
1550
3150
6300
b Notes
2GB
4300 12000 15000
8500 23500 29500
• Specifications are for Sony “Memory Stick
Duo.” The actual number of recordable pictures
can vary depending on the recording
environment and the type of “Memory Stick
Duo.”
4GB
8GB
12500 17000 48000 60000
25500 34500 97500 122000
16GB
• You cannot store a still image under the
following conditions:
– When the shutter speed is slower than 1/50
– While using the fader
– While using smooth slow rec
– While using shot transition
To store still images captured from
movies on a tape on “Memory Stick
Duo”
You can capture an image in a movie and
record it on a “Memory Stick Duo” as a still
image. Be sure to insert a recorded tape and
a “Memory Stick Duo” in your camcorder.
z Tips
• When you take a still image while not recording
a movie, you will hear the shutter click.
1Set the POWER switch to VCR.
• Image sizes of still images are as follows:
– Recording in HDV format/DV format (16:9):
1.2 M
– Recording in DV format (4:3): 0.9 M
– Playing back in HDV format: 1.2 M
– Playing back in DV format (16:9): 0.2 M
– Playing back in DV format (4:3): VGA
2Press the N(play) button to search for
the scene you want to save as a still
image. Press the PHOTO/EXPANDED
FOCUS button or the PHOTO button on
your Remote Commander at the scene.
b Notes
• The recorded date and time on the tape and the
stored date and time on the “Memory Stick
Duo” are both saved on the “Memory Stick
Duo.” When you view the still images, only the
recorded date and time on the tape will be
• Indicators displayed on the screen during
• You can set the PHOTO/EXPANDED FOCUS
button to start the expanded focus function as
you press the button ([PHOTO/EXP.FOCUS]
p. 79).
• Camera data stored on the tape will not be
copied to the “Memory Stick Duo.”
• You cannot store a still image during using your
• The unique pixel array of Sony's ClearVid
CMOS sensor and image processing system
(Enhanced Imaging Processor) allows for still
image resolution equivalent to the sizes
described.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the settings of your camcorder
recordings
Using the handle zoom
Adjusting the zoom
1Set the handle zoom switch Bto VAR
A
B
or FIX.
C
D
z Tips
• When you set the handle zoom switch Bto
VAR, you can zoom in or out at variable
speed.
• When you set the handle zoom switch Bto
FIX, you can zoom in or out at fixed speed
2Press the handle zoom lever Ato zoom
in or out.
b Notes
• You cannot use the handle zoom lever Awhen
the handle zoom switch Bis set to OFF.
• You cannot change the zoom speed of the zoom
lever Cwith the handle zoom switch B.
Move the power zoom lever Cslightly for
a slower zoom. Move it further for a faster
zoom.
Wide view: (Wide angle)
Using the zoom ring
You can zoom at the desired speed by
turning the zoom ring D. Fine adjustment
is also possible.
b Notes
• Turn the zoom ring Dat a moderate speed. If
you turn it too fast, the zoom speed may lag
behind the zoom ring rotation speed, or the
operation sound of the zoom may also be
recorded.
Close view: (Telephoto)
z Tips
• The minimum distance required between your
camcorder and the subject for focus is about 1
cm (about 13/32 in.) for wide angle and about
80 cm (about 2 5/8 feet) for telephoto.
• The focus may not be adjusted at certain zoom
positions if the subject is within 80 cm (about 2
5/8 feet) from your camcorder.
• Be sure to keep your finger on the power zoom
lever C. If you move your finger off the power
zoom lever C, the operation sound of the
power zoom lever Cmay also be recorded.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the focus manually
2
Rotate the focus ring Aand
adjust the focus.
9 changes to
cannot be adjusted any farther. 9
changes to when the focus cannot be
adjusted any closer.
when the focus
z Tips
For focusing manually
• It is easier to focus on the subject when you use
the zoom function. Move the power zoom lever
towards T (telephoto) to adjust the focus, and
then, towards W (wide angle) to adjust the zoom
for recording.
• When you want to record a close-up image of a
subject, move the power zoom lever towards W
(wide angle) to fully magnify the image, then
adjust the focus.
You can adjust the focus manually for
different recording conditions.
Use this function in the following cases.
– To record a subject behind a window covered
with raindrops.
– To record horizontal stripes.
To restore automatic adjustment
Set the FOCUS switch Bto AUTO.
9 disappears and the automatic focus
adjustment is restored.
– To record a subject with little contrast between
the subject and its background.
– When you want to focus on a subject in the
background.
Using automatic focus temporarily
(Push auto focus)
Record the subject while pressing and
holding the PUSH AUTO button C.
If you release the button, the setting returns
to manual focusing.
Use this function to shift the focus on one
subject to another. The scenes will shift
smoothly.
– To record a stationary subject using a tripod.
z Tips
• The focal distance information (for when it is
dark and hard to adjust the focus) appears for
about 3 seconds in the following cases. (It will
not be displayed correctly if you are using a
conversion lens (optional)).
1
During recording or standby, set
the FOCUS switch Bto MAN.
9 appears.
– When you set the FOCUS switch to MAN
and 9 appears on the screen
– When you rotate the focus ring while 9 is
displayed on the screen.
Continued ,
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the expanded focus
(Expanded focus)
Adjusting the image brightness
Assign [EXP.FOCUS] to the PHOTO/
EXPANDED FOCUS button D
beforehand ([PHOTO/EXP.FOCUS],
p. 79).
During standby, press the PHOTO/
EXPANDED FOCUS button D.
[EXPANDED FOCUS] appears and the
center of the screen is magnified by about
2.0 times. It will be easier to confirm the
focus setting during manual focusing. The
screen returns to the original size when you
push the button again.
b Notes
• The image returns to the original size when you
press the REC START/STOP button or the
PHOTO/EXPANDED FOCUS button D.
You can adjust the image brightness by
adjusting the iris, the gain or the shutter
speed or by reducing the light volume with
the ND filter B. Also, when
[EXPOSURE] is assigned to the iris ring,
you can adjust the iris, gain and shutter
speed with the iris ring A. You can assign
[IRIS] or [EXPOSURE] to the iris ring A
from [IRIS/EXPOSURE] of the
z Tips
• You can select a type of an expanded image
displayed during the expanded focus
• You can assign [EXP.FOCUS] to any one of the
The default setting is [IRIS] .
Focusing on a distant subject
(Focus infinity)
b Notes
Slide the focus switch to INFINITY and
hold it there.
• You cannot use the back light function and the
spotlight function if at least two of iris, gain and
shutter speed are adjusted manually.
• [AE SHIFT] is not effective while you adjust
the iris, gain and shutter speed all manually.
appears.
To return to manual focus mode, release the
FOCUS switch.
Use this function to record a distant subject
when the focus is automatically set on a
close subject.
Adjusting the iris
You can manually adjust the iris to control
the volume of the light entering the lens. By
adjusting the iris, you can change or close
the aperture of the lens, which is expressed
as an F value between F1.6 and F11. The
volume of the light increases the more that
you open the aperture (decreasing F value).
The volume of the light decreases the more
that you close the aperture (increasing F
b Notes
• This function is only available during the
manual focus.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
value). The current F value appears on the
screen.
also manually preset one or two of these
parameters and adjust the remaining
parameter(s) with the iris ring.
1Select [IRIS] from
(CAMERA
SET) menu t [IRIS/EXPOSURE] t 1Select [EXPOSURE] from
(CAMERA SET) menu t [IRIS/
EXPOSURE] t [RING ASSIGN]
2During recording or standby, set the
AUTO/MANUAL switch Fto
MANUAL.
2During recording or standby, set the
AUTO/MANUAL switch Fto
MANUAL.
3When the iris is automatically adjusted,
press the IRIS/EXPOSURE button H.
next to the iris value disappears
screen.
3When [EXPOSURE] is automatically
adjusted, press the IRIS/EXPOSURE
button H.
appears on the screen next to the
automatically adjusted items (iris, gain
and shutter speed), indicating that you
can adjust them with the iris ring A.
Manually adjusted items do not change
even when you turn the iris ring.
4Adjust the iris by turning the iris ring
A.
z Tips
• The F value becomes close to F3.4 as the zoom
position changes from W to T even when you
open the aperture by setting the F value lower
than F3.4, such as F1.6.
When
is not displayed, do the
appears next to
following operation.
• The range of focus, an important effect of the
aperture, is called the depth of field. The depth
of field gets shallower as the aperture is opened,
and deeper as the aperture is closed. Use the
aperture creatively to obtain the desired effect in
your photography.
the items, indicating that you can adjust
them with the iris ring A.
– Gain
Press the GAIN button C.
– Shutter speed
Press the SHUTTER SPEED button D
twice. When the shutter speed is not locked,
press the button once.
• This is handy for making the background
blurred or sharp on the screen.
4Adjust the image brightness by turning
To restore automatic adjustment
Press the IRIS/EXPOSURE button H, or
set the AUTO/MANUAL switch Fto
AUTO.
The iris value disappears, or appears
next to the iris value.
the iris ring A.
To restore automatic adjustment
Press the IRIS/EXPOSURE button H, or
set the AUTO/MANUAL switch Fto
AUTO.
The values next to which
is displayed
b Notes
disappear, or appears next to those
values.
• When you set the AUTO/MANUAL switch F
to AUTO, other manually adjusted items (gain,
shutter speed, white balance) also become
automatic.
b Notes
• When you set the AUTO/MANUAL switch F
to AUTO, all manually adjusted items (iris,
gain, shutter speed and white balance) also
become automatic.
Adjusting the exposure
When [IRIS/EXPOSURE] is set to
[EXPOSURE], you can adjust the image
brightness by adjusting the iris, gain and
shutter speed with the iris ring. You can
Continued ,
31
Download from Www.Somanuals.com. All Manuals Search And Download.
z Tips
b Notes
• When you press the GAIN button Cwhile
is displayed on the screen next to the gain value,
disappears and you can adjust the gain
• When you set the AUTO/MANUAL switch F
to AUTO, other manually adjusted items (iris,
shutter speed, white balance) also become
automatic.
manually. When you press the GAIN button C
again,
appears and you can adjust the gain
with the iris ring. See step 3in “Adjusting the
gain.
Adjusting the shutter speed
You can manually adjust and fix the shutter
speed. You can make a moving subject look
still or emphasize the movement of a
moving subject by adjusting the shutter
speed.
• When you press the SHUTTER SPEED button
Dwhile
the shutter speed value,
is displayed on the screen next to
disappears and you
can adjust the shutter speed manually. When
you press the SHUTTER SPEED button D
1During recording or standby, set the
AUTO/MANUAL switch Fto
MANUAL.
again,
appears and you can adjust the shutter
speed with the iris ring. See steps 3to 4in
details on how to adjust the shutter speed.
2Press the SHUTTER SPEED button D
until the shutter speed value is
highlighted.
Adjusting the gain
You can adjust the gain manually when you
do not want to use the AGC (automatic gain
control).
3Change the shutter speed displayed on
the screen by turning the SEL/PUSH
EXEC dial E.
1Set the AUTO/MANUAL switch Fto
You can set a shutter speed between 1/3
second and 1/10000 second.
MANUAL during recording or standby.
2When the gain is automatically
adjusted, press the GAIN button C.
The gain value appear on the screen, or
next to the gain value disappears.
The selected shutter speed appears on
the screen. For example, if you select
1/100 second, [100] appears. The larger
the number that appears on the screen,
the faster the shutter speed.
3Set the gain switch Gto H, M or L.
The gain value set for the selected gain
switch position appears on the screen.
You can set the gain value for each gain
switch position from [GAIN SETUP] of
4Press the SEL/PUSH EXEC dial Eto
lock the shutter speed.
To readjust the shutter speed, do steps
2to 4.
the
(CAMERA SET) menu
z Tips
• It is difficult to focus automatically at a lower
shutter speed. Manual focusing with your
z Tips
camcorder attached to a tripod is recommended.
• When you record a movie with the gain set to
[-6dB] and play it back with the data code, the
gain value is displayed as [---].
• The picture may flicker or change colors under
fluorescent lamps, sodium lamps, or mercury
lamps.
To adjust the gain automatically
Press the GAIN button C, or set the
AUTO/MANUAL switch Fto AUTO.
The gain value disappears, or appears
next to the gain value.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
To adjust the shutter speed
automatically
Press the SHUTTER SPEED button D
twice, or set the AUTO/MANUAL switch
Fto AUTO.
Adjusting to Natural Color
(White balance)
The shutter speed value disappears, or
appears next to the shutter speed value.
b Notes
• When you set the AUTO/MANUAL switch F
to AUTO, other manually adjusted items (iris,
gain, white balance) also become automatic.
Adjusting the volume of light
(ND filter)
You can record the subject clearly by using
the ND filter Bwhen the recording
environment is too bright.
There are 3 levels of ND filter setting. ND
filter 1 reduces the volume of light to about
1/4, ND filter 2 to about 1/16 and ND filter
3 to about 1/64.
You can adjust and fix the white balance
according to the lighting conditions of
recording environment. You can store white
balance values in memory A (
A) and
If
flashes during the iris automatic
memory B ( B), respectively. Unless a
adjustment, set the ND filter to 1. If
flashes during the iris automatic
adjustment, set the ND filter to 2. If
flashes during the iris automatic
adjustment, set the ND filter to 3.
The ND filter indicator will stop flashing
and remain on the screen.
white balance is readjusted, values will
remain even after the power has been
turned off.
When you select PRESET, either
[OUTDOOR] or [INDOOR] is selected,
according to which one you previously set
with [WB PRESET] in the
If
flashes, set the ND filter to OFF.
will disappear from the screen.
(CAMERA SET) menu.
b Notes
• If you move the ND filters Bduring recording,
the picture and sound may be distorted.
• When adjusting the iris manually, the ND filter
indicator does not flash even if the light volume
should be adjusted with the ND filter.
1
During recording or standby, set
the AUTO/MANUAL switch Dto
MANUAL.
z Tips
2
3
Press the WHT BAL button A.
• While recording a bright subject, diffraction
may occur if you close the aperture further
down, resulting in a fuzzy focus (this is a
common phenomenon with video cameras). The
ND filter Bsuppresses this phenomenon and
gives better recording results.
Set the white balance memory
switch Bto any one of
PRESET/A/B.
Continued ,
33
Download from Www.Somanuals.com. All Manuals Search And Download.
To adjust the white balance
automatically
Press the WHT BAL button Aor set the
AUTO/MANUAL switch Dto AUTO.
Indicator
Shooting conditions
• White balance values
adjusted for light
sources can be stored
in memory A and
memory B. Follow the
steps in “To save the
adjusted white balance
A
(Memory A)
B
(Memory B)
b Notes
• When you set the AUTO/MANUAL switch D
to AUTO, other manual adjustments (iris, gain,
shutter speed) also become automatic.
• Recording neon signs
or fireworks
• Recording sunset/
sunrise, just after
sunset or just before
sunrise
Customizing the picture quality
(Picture profile)
Outdoor
([OUTDOOR])
• Under daylight color
fluorescent lamps
• Under the lighting
conditions that change
in many ways, such as
a party hall
n
Indoor
([INDOOR])
• Under strong light
such as in a
photography studio
• Under sodium lamps
or mercury lamps
To save the adjusted white balance
value in memory A or B
1Set the white balance memory switch to
You can customize the picture quality by
adjusting picture profile items such as
[COLOR LEVEL] and [SHARPNESS].
Connect your camcorder to a TV or
monitor, and adjust the picture quality
while observing the picture on the TV or
monitor screen.
Picture quality settings for different
recording conditions are stored in [PP1]
through [PP6] as default settings.
A (
A) or B (
B) in step 3 of
“Adjusting to natural color (White
balance).”
2Capture a white subject, such as white
paper, full-screen in the same lighting
condition as the one in which the subject
is.
3Press
A or
(one push) button C.
B starts flashing rapidly. It
b Notes
will stay on when the white balance
adjustment is completed and the
• When you set [x.v.Color] of the
(CAMERA SET) menu to [ON], the
picture profile will be disabled.
adjusted value is stored in
B.
A or
34
Download from Www.Somanuals.com. All Manuals Search And Download.
1Press the PICTURE PROFILE button
Picture profile
number (setting
name)
B.
Recording condition
2Select the PICTURE PROFILE number
with the SEL/PUSH EXEC dial A.
PP1
:USER
You can assign your own
setting
3Select [SETTING] with the SEL/PUSH
EXEC dial A.
PP2
:USER
You can assign your own
setting.
4Select an item to be adjusted with the
SEL/PUSH EXEC dial A.
PP3
:PORTRAIT
Appropriate setting to
record people
5Adjust the picture quality with the SEL/
PUSH EXEC dial A.
PP4
:CINEMA
Appropriate setting to
record film-like pictures
6Repeat steps 4and 5to adjust other
items.
PP5
:SUNSET
Appropriate setting to
record sunset
7Select [
RETURN] with the SEL/
PUSH EXEC dial A.
PP6
Appropriate setting to
8Select [OK] with the SEL/PUSH EXEC
dial A.
:MONOTONE record monotone pictures
A picture profile indicator appears.
1
During standby, press the
PICTURE PROFILE button B.
2
Select a picture profile number
with the SEL/PUSH EXEC dial A.
You can select the items from [PP1] to
[PP6].
You can record with the settings of the
selected picture profile.
3
Select [OK] with the SEL/PUSH
EXEC dial A.
To cancel the picture profile recording
Select [OFF] in step 2 with the SEL/PUSH
EXEC dial A.
To change the picture profile
You can change the settings stored in [PP1]
through [PP6].
Continued ,
35
Download from Www.Somanuals.com. All Manuals Search And Download.
GAMMA
To select a gamma curve.
Item
Description and settings
[STANDARD]
[CINEMATONE1]
[CINEMATONE2]
Standard gamma curve
Gamma curve 1 for producing tone of film camera images
Gamma curve 2 for producing tone of film camera images
BLK COMPNSTN
To select a gamma curve characteristic for dark areas.
Item
Description and settings
[OFF]
Normal setting
[STRETCH]
Improves gamma curve characteristics and enhances gradation in dark
areas.
[COMPRESS]
Controls gamma curve characteristics to produce solid black.
KNEE POINT
To set the point at which video signal compression starts in order to prevent over-highlighting,
by limiting signals in high contrast areas of the subject to the dynamic range of your
camcorder.
Item
Description and settings
Automatically sets the knee point.
Knee point: 100%
[AUTO]
[HIGH]
[MIDDLE]
[LOW]
Knee point: 95%
Knee point: 80%
COLOR MODE
To set type of colors.
Item
Description and settings
[STANDARD]
[CINEMATONE1]
Standard colors
Film camera image-like colors good with [GAMMA] set to
[CINEMATONE1]
[CINEMATONE2]
Film camera image-like colors good with [GAMMA] set to
[CINEMATONE2]
COLOR LEVEL
To set the color level.
Item
Description and settings
-7 (light) to +7 (dark), -8: black and white
36
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR PHASE
To set the color phase.
Item
Description and settings
-7 (greenish) to +7 (reddish)
COLOR DEPTH
To set the color depth.
This function is more effective for chromatic colors and less effective for achromatic colors.
The color looks deeper as you increase the setting value to more positive side, and lighter as
you decrease the value to more negative side. This function is effective even if you set
[COLOR LEVEL] to [-8] (monotone).
Item
Description and settings
-7 (shallow) to +7 (deep)
WB SHIFT
To set items for the white balance shift.
Item
Description and settings
-9 (bluish) to +9 (reddish)
SHARPNESS
To adjust the definition of a subject.
Item Description and settings
-7 (soft) to +7 (clear)
Continued ,
37
Download from Www.Somanuals.com. All Manuals Search And Download.
SKINTONE DTL
To adjust the detail of skintone areas to reduce wrinkles.
Item
Description and settings
[ON/OFF]
Suppresses details in skin-tone areas to reduce wrinkles. Select [ON]
when you want to use this function. You can also select other areas.
[LEVEL]
Sets the adjustment level.
1 (less adjust the detail) to 8 (more adjust the detail)
[COLOR SEL]
Sets color items for the detail adjustment.
[RANGE]
: Sets the color range.
0 (selects no color), 1 (narrow: selects a single
color) to 31 (wide: selects multiple colors in
similar color phases and saturation)
The detail will not be adjusted when you set
[RANGE] to 0.
[ONE PUSH SET]: Automatically selects target colors for a subject at
the center or the marker. [RANGE] will not be
changed.
PROFILE NAME
COPY
To copy the settings of the picture profile to another picture profile number.
RESET
To reset the picture profile to the default setting.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
4Select the number of the picture profile
that you want to copy to with the SEL/
PUSH EXEC dial A.
To name the picture profile settings
You can name picture profile1 through 6.
1Press the PICTURE PROFILE button
5Select [YES] with the SEL/PUSH
B.
EXEC dial A.
2Select the picture profile that you want
to name with the SEL/PUSH EXEC dial
A.
6Select [
RETURN] t [OK] with the
SEL/PUSH EXEC dial A.
3Select [SETTING] t [PROFILE
NAME] with the SEL/PUSH EXEC dial
A.
To reset the picture profile settings
You can reset the picture profile settings by
each picture profile number. You cannot
reset all picture profile settings at once.
4Select a letter with the SEL/PUSH
EXEC dial A. Repeat this operation
until a complete name is entered.
1Press the PICTURE PROFILE button
B.
PICT. PROFILE
2Select the number of the picture profile
that you want to reset with the SEL/
PUSH EXEC dial A.
3Select [SETTING] t [RESET] t
CANCEL
OK
[YES] t [
RETURN] t [OK]
P I CTURE PROF I LE END
with the SEL/PUSH EXEC dial A.
z Tips
Adjusting the volume
• Each name can be up to 12 characters long.
Characters that can be used in profile
names:
• A to Z
• 0 to 9
You can adjust the volume of the stereo
internal microphone or an external
microphone connected to the MIC jack.
• - _ / #
& : .
@
5Select [OK] with the SEL/PUSH EXEC
dial A.
The profile name is changed.
6Select [
RETURN] t [OK] with
the SEL/PUSH EXEC dial A.
To copy the picture profile setting to
other picture profiles
1Press the PICTURE PROFILE button
B.
2Select the picture profile that you want
to copy from with the SEL/PUSH
EXEC dial A.
A B C
3Select [SETTING] t [COPY] with
SEL/PUSH EXEC dial A.
Continued ,
39
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Set the AUDIO LEVEL switch A
of the channel to be adjusted to
MAN.
appears on the screen.
Turn the AUDIO LEVEL dial Bto
adjust the volume during
recording or standby.
To restore automatic adjustment
Set the AUDIO LEVEL switch Ato
AUTO.
z Tips
• To check other audio settings, press the
STATUS CHECK button C. You can also
check microphone audio levels.
• For other settings, see the
(AUDIO SET)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning the functions to the ASSIGN buttons
Some functions need to be assigned to the
ASSIGN 4-6 buttons
ASSIGN buttons for use. You can assign a
single function to any one of the ASSIGN 1
to 6 buttons.
Functions you can assign to the
ASSIGN buttons
The buttons in parentheses indicate that the
functions are assigned to the buttons by
default.
• EXP.FOCUS (p. 79)
• D.EXTENDER (p. 66)
• RING ROTATE (p. 63)
• INDEX MARK (p. 42)
• STEADYSHOT (p. 65)
• BACK LIGHT (p. 65)
• SPOTLIGHT (p. 65)
• FADER (p. 66)
ASSIGN 1-3
buttons
• SMTH SLW REC (p. 66)
• COLOR BAR (p. 69)
• END SEARCH (p. 42)
• MARKER (p. 72)
• PEAKING (p. 71)
1
2
Press the MENU button B.
Select the
(OTHERS) t
[ASSIGN BTN] with the SEL/PUSH
EXEC dial A.
• Picture profile (p. 34)
• SHOT TRANSITION (p. 43)
3
Select the ASSIGN button to
which you want to assign a
function from [ASSIGN1] to
[ASSIGN6] with the SEL/PUSH
EXEC dial A.
• [------] appears if no function is assigned to
the ASSIGN button.
• Select [YES] when you select [SHOT
TRANSITION], then do step 6.
4
Select the function that you want
to assign with the SEL/PUSH
EXEC dial A.
Continued ,
41
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel the operation
Press the ASSIGN button to which [INDEX
MARK] is assigned again before you start
recording.
5
6
Select [OK] with the SEL/PUSH
EXEC dial A.
b Notes
Press the MENU button Bto hide
the menu screen.
• You cannot record an index signal on a recorded
tape afterward.
Reviewing the most recently
recorded scenes (Rec review)
z Tips
• Shot transition is assigned to the ASSIGN 4, 5
assignment to return to the pre-setting
assignment.
• To cancel the shot transition, select [SHOT
TRANSITION] t [YES] in step 3.
You can view about 2 seconds of the scene
recorded just before you stopped the tape.
This is convenient during playback of the
latest scene check.
Recording an index signal
1
2
Assign [REC REVIEW] to one of
If you record a scene with an index signal,
you can easily find that scene during play
The index function will make it easier to
check the transition of recording or edit
your pictures using index signals.
Press the ASSIGN button to
which [REC REVIEW] is assigned
during standby.
The last 2 seconds (approx.) of the most
recently recorded scene will be played
back, then your camcorder returns to
standby.
1
2
Assign [INDEX MARK] to one of
Searching for the last scene of
the most recent recording
(End search)
Press the ASSIGN button to
which [INDEX MARK] is assigned.
During recording
appears for about 7 seconds and an
index signal is recorded.
1
Assign [END SEARCH] to one of
During standby
flashes.
After you press the REC START/STOP
button to start recording,
appears
for about 7 seconds and an index signal
is recorded.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Shot transition
2
Press the ASSIGN button to
which [END SEARCH] is
assigned.
You can store settings of focus, zoom, iris,
gain, shutter speed and white balance, and
smoothly shift from the current settings to
the stored settings (shot transition).
For example, you can shift the focus from
closer objects to farther objects, or change
the depth of field by adjusting the iris. You
can also develop scenes under different
conditions smoothly. If you store manually
adjusted settings of white balance, you can
smoothly shift from one scene to another
under different conditions, such as from
indoor to outdoor.
The last scene of the most recent
recording will be played back for about
5 seconds, and the camcorder goes the
standby at the point where the last
recording has finished.
b Notes
• End search will not work once you eject the
tape.
• End search will not work correctly if a blank
section exists between recorded sections on the
tape.
Sony recommends that you use a tripod to
avoid image blurring.
SHOT-A
SHOT-B
You can set the transition curve and
duration using [SHOT TRANSITION]
ASSIGN 4-6 buttons
1
Assign [SHOT TRANSITION] to
z Tips
• Shot transition is assigned to ASSIGN 4, 5
and 6 buttons.
Continued ,
43
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Store the settings (shot)
4
Record using the shot transition
function
1Press the ASSIGN 4 button repeatedly
to bring up the SHOT TRANSITION
STORE screen.
1Press the ASSIGN 4 button repeatedly
to bring up the SHOT TRANSITION
EXEC screen.
60min
SHOT TRANSITION
STBY
0:00:05
STORE
SHOT-A
SHOT-B
STORE
60min
SHOT TRANSITION
STBY
0:00:05
EXEC
SHOT-A
SHOT-B
EXEC
S
E
2Adjust the desired items manually.
adjustment.
Transition bar
S: start
E: end
3Press the ASSIGN 5 button for storing
the setting in SHOT-A, or the
ASSIGN 6 button for storing the setting
in SHOT-B.
2Press the REC START/STOP button.
3Press the ASSIGN 5 button for
recording with SHOT-A, or the
ASSIGN 6 button for recording with
SHOT-B.
The settings shift from the current ones
to the stored ones.
b Notes
• The setting values assigned to SHOT-A and
SHOT-B are deleted when the POWER
switch is turned to OFF (CHG).
z Tips
3
Check the stored settings
• Press the ASSIGN 4 button repeatedly to
cancel the SHOT TRANSITION.
1Press the ASSIGN 4 button repeatedly
to bring up the SHOT TRANSITION
CHECK screen.
b Notes
60min
SHOT TRANSITION
STBY
0:00:05
CHECK
SHOT-A
SHOT-B
CHECK
• You cannot zoom, focus, or adjust manually
while checking or activating the Shot transition.
• When you change [SHOT TRANSITION]
(p. 68), press the ASSIGN 4 button repeatedly
to exit the shot transition screen.
2Press the ASSIGN 5 button to check
the SHOT-A. Press the ASSIGN 6
button to check the SHOT-B.
• You cannot return from the stored SHOT-A or
SHOT-B settings to previous settings after you
execute the shot transition during recording.
• If you press the following buttons during the
shot transition operation, the operation will be
canceled:
– PICTURE PROFILE button
– MENU button
– The PHOTO/EXPANDED FOCUS button or
ASSIGN button to which [EXP.FOCUS] is
assigned.
The selected setting will take effect on
the picture on the screen. The focus,
zoom, and so on, are automatically
adjusted as stored in the setting.
b Notes
• On the shot transition check screen, the
settings do not shift to the stored settings of
the transition time and curve set in [TRANS
– STATUS CHECK button
44
Download from Www.Somanuals.com. All Manuals Search And Download.
– The ASSIGN button to which [SMTH SLW
REC] is assigned.
z Tips
• You can also make a transition from the SHOT-
A to saved SHOT-B or from the SHOT-B to the
SHOT-A. For example, to make a transition
from the SHOT-A to the SHOT-B, display the
shot transition check screen, press the ASSIGN
5 button to bring up the SHOT-A and press the
REC START/STOP button. Then, display the
shot transition execution screen and press the
ASSIGN 6 button.
• You can rehearse the shot transition by pressing
the ASSIGN button (5 or 6), to which your
customized setting are assigned, before pressing
the REC START/STOP button in step 4.
To cancel the operation
Press the ASSIGN 4 button repeatedly to
exit the shot transition screen.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
VOLUME/
MEMORY button
PLAY button
POWER
switch
MEMORY/PLAY button
MEMORY/INDEX button
MEMORY/DELETE button
SEL/PUSH EXEC dial
You can play back movies as follows.
1
Slide the POWER switch to VCR while pressing the
green button.
2
Start playing back.
Press m (rewind) to go to the point you want to view, then press N (play) to start
playback.
• x : STOP
• X : PAUSE (Press N or X again to restart the playback)
• m : REW
(Rewind, review)
• M : FF (Cue, fast forward)
• y : SLOW
b Notes
• Your camcorder automatically goes into a stopped state when it is in pause for more than 3 minutes.
• The screen may temporarily go blank losing images and sound when signals switch between HDV
and DV during playback of a tape in which HDV format and DV format are mixed.
• You cannot play back movies recorded in HDV format on DV format video cameras or mini DV players.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
z Tips
• To play back the tape recorded using a monaural microphone connected, see
• To reset the tape counter, press the ZERO SET MEM button. You can also use the ZERO SET
To search for a scene while viewing a movie
Press and hold m/M during playback (Picture Search). To view during fast forward, press
and hold M. To view during rewind, press and hold m (Skip Scan).
To adjust the volume
Adjust the volume with the VOLUME/MEMORY button.
To view still images
1Set the POWER switch to VCR.
2Press the MEMORY/PLAY button.
3Select still image that you want to view using the VOLUME/MEMORY button.
To stop viewing still images, press the MEMORY/PLAY button again.
To display the list of still images (index screen)
1Set the POWER switch to VCR.
2Press the MEMORY/INDEX button.
101–0050
101
1/19
3Select a still image using the VOLUME/MEMORY button.
To display a single image, move B to that image and press the MEMORY/PLAY button.
To stop displaying the list of still images, press the MEMORY/INDEX button again.
To delete still images from the “Memory Stick Duo”
1Do the steps of “To view still images” to display still images that you want to delete.
2Press the MEMORY/DELETE button.
3Select [YES] with the SEL/PUSH EXEC dial.
The still image will be deleted.
Continued ,
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback (Continued)
b Notes
• Still images cannot be restored once you delete them.
• You cannot delete still images when the “Memory Stick Duo” is write-protected (p. 106) or the still image
z Tips
• To delete a still image in the index, move B to the still image using the VOLUME/MEMORY button,
then do steps 2and 3.
• To delete all still images, do [
ALL ERASE] of the
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing/checking the settings in your
camcorder
Displaying recording data (Data
code)
You can display information, including
date, time and camera data, automatically
stored during recording on the screen
during playback.
1
2
Set the POWER switch Bto VCR.
Press the DATA CODE button A
during playback or pause.
The screen changes (date and time
display t camera data display t no
display) as you press the button.
Changing the screen
You can turn on and off the display of the
time code, tape counter, and other
information on the screen.
A SteadyShot off
Press the DISPLAY/BATT INFO
button E.
B Exposure
appears during playback of the
The screen indicators turn on (displayed)
and off (undisplayed) as you press the
button.
movie recorded with the iris, gain and
shutter speed automatically adjusted.
appears during playback of the
movie recorded with the iris, gain and
shutter speed manually adjusted.
z Tips
• You can display the screen indicators during
playback on a TV. Select [V-OUT/PANEL] or
C Iris
appears in the iris value display
area during playback of the movie
recorded with the iris manually adjusted
to its maximum value.
D Gain
Continued ,
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing/checking the settings in your camcorder (Continued)
E Shutter speed
AUDIO t OUTPUT t ASSIGN t
CAMERA
F White balance
When the POWER switch Bis set to
VCR, the display changes in the
following sequence:
appears during playback of the
movie recorded with the shot transition.
AUDIO t OUTPUT t ASSIGN
b Notes
• The exposure correction value (0EV), shutter
speed and iris will be displayed during viewing
of still images on “Memory Stick Duo.”
• Date and time will be displayed in the same area
when you select the date and time display. If
you record without setting date and time,
[-- -- ----] and [--:--:--] will be displayed.
• An accurate shutter speed may not be displayed
when you play back a tape recorded with your
camcorder on another device. Check the data
code that is displayed on the screen when you
play back the tape on your camcorder for the
accurate shutter speed.
• When you record a movie with the gain set to
[-6dB] and play it back with the data code, the
gain value is displayed as [---].
To hide the display
• Press the STATUS CHECK button C.
Checking the remaining battery
(Battery Info)
Set the POWER switch to OFF (CHG), then
press the DISPLAY/BATT INFO button
E. The approximate recordable time in the
selected format and battery information
appear for about 7 seconds. You can view
the battery information for up to 20 seconds
by pressing the button again while the
information is displayed.
Displaying the settings in your
camcorder (Status check)
Remaining battery (approx.)
You can check the settings of the following
items.
•
Audio setup such as [WIND] (p. 70)
60
65
• Output signal setup ([VCR HDV/DV], etc.)
• Functions assigned to the ASSIGN buttons
Recording capacity (approx.)
• Camera setup. (p. 63)
1
2
Press the STATUS CHECK button
C.
Turn the SEL/PUSH EXEC dial D
until a desired display shows up
on the screen.
When the POWER switch Bis set to
CAMERA, the display changes in the
following sequence:
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating a scene on a tape
Commander at the scene where
you want to create a cue point.
The tape counter is reset to “0:00:00”
and
appears on the screen.
60min
0:00:00
A
B
C
E
F
If the tape counter is not displayed,
press the DISPLAY button G.
D
G
2
3
Press the STOP button Fwhen
you want to stop playback.
H
Press the mREW button C.
The tape stops automatically when the
tape counter reaches “0:00:00.”
The tape counter returns to the time
code display, and
disappears.
4
Press the PLAY button E.
Playback starts from the point
designated “0:00:00” on the tape
counter.
b Notes
Remote Commander.
To cancel the operation
Press the ZERO SET MEM button Hor
the ZERO SET MEMORY button Dagain
before rewinding.
Searching quickly for a desired
scene (Zero set memory)
b Notes
• There may be a discrepancy of several seconds
between the time code and the tape counter.
• Zero set memory will not function correctly if
there is a blank section between recorded
sections on the tape.
1
During playback, press the ZERO
SET MEM button on your
camcorder or the ZERO SET
MEMORY button on the Remote
H
D
Continued ,
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating a scene on a tape (Continued)
Searching for a scene by date of
recording (Date search)
Searching for a recording start
point (Index search)
You can search scenes by recording dates.
You can search scenes by indexes recorded
1
2
Set the POWER switch to VCR.
1
2
Set the POWER switch to VCR.
Press the SEARCH M. button A
on the Remote Commander
repeatedly to select [DATE
SEARCH].
Press the SEARCH M. button A
on the Remote Commander
repeatedly to select [INDEX
SEARCH].
3
Press the . (previous)/>
(next) button Bon the Remote
Commander to select a recording
date.
3
Press the . (previous)/>
(next) button Bon the Remote
Commander to select an index
point.
You can select a date previous or next to
the date of the current tape position.
You can select an index previous or next
to the index of the current tape position.
Playback automatically starts from the
scene recorded on the selected date.
Playback automatically starts from the
scene marked by the index.
To cancel the operation
Press the STOP button Fon the Remote
Commander.
To cancel the operation
Press the STOP button Fon the Remote
Commander.
b Notes
• Each day of recording must be longer than 2
minutes. Your camcorder may not detect the
date if the recording of that date is short.
• The date search may not work properly if a
blank section exists on the tape.
b Notes
• Recording between indexes must be longer than
2 minutes. Your camcorder may not detect the
date if the recording between the indexes is
short.
• The index search may not work properly if a
blank section exists on the tape.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the picture on a TV
Connection methods and image quality differ depending on what type of TV is connected and
connectors used.
Refer also to the instruction manuals supplied with the device to be connected.
Jacks on your camcorder
Open the jack cover and connect the cable.
1
2
3
b Notes
• Make all menu settings on your camcorder before connecting. The TV may not recognize the video signal
properly when changing [VCR HDV/DV] and [i.LINK CONV] settings after connecting with an i.LINK
cable.
Continued ,
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the picture on a TV (Continued)
Connecting to a high definition TV
A movie recorded in HD quality is played back in HD quality.
A movie recorded in SD quality is played back in SD quality.
i.LINK
(for HDV1080i)
COMPONENT IN
AUDIO
HDMI
HDI
A
B
C
: Signal flow
Type Camcorder
Cable
TV
Menu Setting
(IN/OUT REC)
menu t
A
Component A/V cable
(supplied)
[VCR HDV/DV] t
[AUTO] (p. 74)
[COMPONENT] t
2
(Green) Y
(Blue) PB/CB
(Red) PR/CR
(White)
(Red)
b Notes
• If you connect only component video plugs, audio signals are not output. Connect the white and red plugs
to output audio signals.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
: Signal flow
Menu Setting
Type Camcorder
Cable
TV
(IN/OUT REC)
HDMI
HDMI
B
menu t
3
IN
HDMI cable (optional)
[VCR HDV/DV] t
[AUTO] (p. 74)
b Notes
• Use an HDMI cable with the HDMI logo.
• Pictures in the DV format are not output from the HDMI OUT jack, if copyright protection signals are
recorded in the pictures.
• Your TVs may not function correctly (for example, no sound or image). Do not connect the HDMI OUT
jack of your camcorder and HDMI OUT jack of the external device with the HDMI cable. This may cause
a malfunction.
z Tips
• HDMI (High-Definition Multimedia Interface) is an interface to send both video and audio signals.
Connecting HDMI OUT jack to an external device supplies high quality images and digital audio to you.
(IN/OUT REC)
C
menu t
i.LINK cable (optional)
[VCR HDV/DV] t
1
[AUTO] (p. 74)
[i.LINK CONV] t
[OFF] (p. 76)
b Notes
• Your TV needs to have an i.LINK jack compatible with HDV1080i. For details, confirm the
specifications of your TV.
• If your TV is not compatible with HDV1080i, connect your camcorder and TV with the supplied
component A/V cable as illustrated in
.
• The TV needs to be set so that it recognizes that the camcorder is connected. Refer to the instruction
manuals supplied with your TV.
• This camcorder has a 4-pin i.LINK terminal. Select a cable that fits the terminal on the TV to be attached.
Continued ,
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the picture on a TV (Continued)
Connecting to a 16:9 (wide) or 4:3 TV
A movie recorded in HD quality is converted and played
back in SD quality. A movie recorded in SD quality is played
back in SD quality.
COMPONENT IN
AUDIO
i.LINK
i.LINK
S VIDEO
VIDEO/AUDIO
VIDEO/AUDIO
D
E
F
G
To set the aspect ratio according to the connected TV (16:9/4:3)
b Notes
• When you play back a tape recorded in the DV format on a 4:3 TV not compatible with the 16:9 signal, set
z Tips
• When your TV is monaural (When your TV has only one audio input jack), connect the yellow plug of the
A/V connecting cable to the video input jack and connect the white (left channel) or the red (right
channel) plug to the audio input jack of your TV or VCR. When you want to play the sound in monaural
mode, use a connecting cable for that purpose.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
: Signal flow
Menu Setting
Type Camcorder
Cable
TV
(IN/OUT REC)
menu t
D
Component A/V cable
(supplied)
[VCR HDV/DV] t
[AUTO] (p. 74)
[COMPONENT] t
[576i] (p. 76)
[TV TYPE] t
2
(Green) Y
(Blue) PB/CB
(Red) PR/CR
(White)
(Red)
b Notes
• If you connect only component video plugs, audio signals are not outputted. Connect the white and red
plugs to output audio signals.
(IN/OUT REC)
E
menu t
[VCR HDV/DV] t
[AUTO] (p. 74)
i.LINK cable (optional)
1
[i.LINK CONV] t
[ON] (p. 76)
b Notes
• The TV needs to be set so that it recognizes that the camcorder is connected. Refer to the instruction
manuals supplied with your TV.
• This camcorder has a 4-pin i.LINK terminal. Select a cable that fits the terminal on the TV to be attached.
* Change the settings according to the TV connected.
Continued ,
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the picture on a TV (Continued)
: Signal flow
Menu Setting
Type Camcorder
Cable
TV
A/V connecting cable with
S VIDEO (optional)
(IN/OUT REC)
menu t
[VCR HDV/DV] t
[AUTO] (p. 74)
[TV TYPE] t
2
(White)
(Red)
(Yellow)
z Tips
• When connecting only an S VIDEO plug (S VIDEO channel), audio signals are not output. To output
audio signals, connect the white and red plugs of the A/V connecting cable with S VIDEO to the audio
input jack of your TV.
• This connection produces higher resolution pictures compared with the A/V connecting cable (Type
).
A/V connecting cable
(supplied)
(IN/OUT REC)
[VCR HDV/DV] t
[AUTO] (p. 74)
[TV TYPE] t
2
(Yellow)
(White)
(Red)
* Change the settings according to the TV connected.
b Notes
• If you connect your camcorder to the TV using more than one type of cable to output images, the order of
priority of the TV input jacks is as follows:
HDMI t component video t S VIDEO t video.
When connecting to your TV via a VCR
your camcorder to the LINE IN input on the VCR using the A/V connecting cable. Set the
input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.).
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menu
Using the menu items
You can change various settings or make
detailed adjustments using the menu items
displayed on the screen.
CAMERA SET (p. 63)
AUDIO SET (p. 70)
DISPLAY SET (p. 71)
IN/OUT REC (p. 74)
MEMORY SET (p. 77)
OTHERS (p. 78)
STBY
OTHERS
RETURN
CAMERA PROF.
ASSIGN BTN
PHOTO/EXP.FOCUS
CLOCK SET
WORLD TIME
LANGUAGE
QUICK REC
POWER switch
MENU
[
]
MENU :END
button
SEL/PUSH
EXEC dial
4
Turn the SEL/PUSH EXEC dial
until the desired menu item is
highlighted, then press the dial to
select the item.
1
2
While pressing the green button,
set the POWER switch.
STBY
OTHERS
PHOTO/EXP.FOCUS
CLOCK SET
WORLD TIME
LANGUAGE
Press and hold the
green button when
you slide the
POWER switch from
OFF (CHG).
QUICK REC
BEEP
REC LAMP
REMOTE CTRL ON
[
]
MENU :END
The available menu items vary
depending on the position of the power
switch of your camcorder. Unavailable
items will be grayed out.
Press the MENU button.
The menu index screen appears.
5
Turn the SEL/PUSH EXEC dial
until the desired setting is
highlighted or to bring up the
desired setting, then press the
dial to confirm the setting.
STBY
CAMERA SET
PROG. SCAN
IRIS/EXPOSURE
GAIN SETUP
AGC LIMIT
MINUS AGC
WB PRESET
AWB SENS
[
]
MENU :END
60min
STBY
0:00:00
3
Turn the SEL/PUSH EXEC dial
until the icon of the desired menu
is highlighted, then press the dial
to select the menu.
REMOTE CTRL
ON
OFF
[
]
MENU :END
Continued ,
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menu items (Continued)
6
Press the MENU button to hide
the menu screen.
To return to the previous screen, select
[
RETURN].
60
Download from Www.Somanuals.com. All Manuals Search And Download.
.
Available menu items (z) vary depending on the POWER switch
position.
Menu items
Position of POWER switch:
CAMERA
VCR
(CAMERA SET) menu (p. 63)
PROG.SCAN
IRIS/EXPOSURE
GAIN SETUP
AGC LIMIT
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
MINUS AGC
WB PRESET
AWB SENS
AE SHIFT
AE RESPONSE
AT IRIS LMT
FLCKR REDUCE
CNTRST ENHCR
BACK LIGHT
SPOTLIGHT
STEADYSHOT
AF ASSIST
HANDLE ZOOM
D.EXTENDER
FADER
SMTH SLW REC
INTERVAL REC
DV FRAME REC
SHOT TRANSITION
x.v.Color
COLOR BAR
(AUDIO SET) menu (p. 70)
DV AU.MODE
AUDIO LIMIT
z
z
z
–
–
–
WIND
MULTI-SOUND
DV AUDIO MIX
–
z
z
–
(DISPLAY SET) menu (p. 71)
ZEBRA
HISTOGRAM
z
z
z
z
z
z
z
z
–
–
–
PEAKING
MARKER
–
–
EXP.FOCUS TYPE
CAM DATA DSP
AU.LVL DISP
–
–
LCD BRIGHT
z
Continued ,
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu items (Continued)
Position of POWER switch:
CAMERA
VCR
z
LCD COLOR
LCD BL LEVEL
VF B.LIGHT
VF POWERMODE
LETTER SIZE
REMAINING
z
z
z
z
z
z
z
z
z
z
z
z
DISP OUTPUT
z
(IN/OUT REC) menu (p. 74)
REC FORMAT
VCR HDV/DV
DV REC MODE
DV WIDE REC
COMPONENT
z
–
–
z
z
–
z
z
z
z
z
z
z
z
i.LINK CONV
TV TYPE
(MEMORY SET) menu (p. 77)
ALL ERASE
–
z
z
z
z
z
z
FORMAT
FILE NO.
z
z
z
z
–
NEW FOLDER
REC FOLDER
PB FOLDER
(OTHERS) (p. 78)
CAMERA PROF.
ASSIGN BTN
PHOTO/EXP.FOCUS
CLOCK SET
WORLD TIME
LANGUAGE
PB ZOOM
z
z
z
z
z
z
–
z
z
z
z
z
z
z
–
QUICK REC
BEEP
z
z
z
z
z
–
REC LAMP
REMOTE CTRL
z
62
Download from Www.Somanuals.com. All Manuals Search And Download.
(CAMERA SET)
menu
Settings to adjust your camcorder to the
recording conditions (GAIN SETUP/BACK
LIGHT/STEADYSHOT, etc.)
z Tips
• The iris, gain and shutter speed values are
adjusted as follows when you change the [RING
ASSIGN] setting with the AUTO/MANUAL
switch set to MANUAL.
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
menu items.
– When you change [RING ASSIGN] from
[IRIS] to [EXPOSURE]
The adjustment remains in the same mode
that it was in prior to changing [RING
ASSIGN]. If it is in automatic adjustment, it
remains in automatic adjustment after
changing [IRIS] to [EXPOSURE]. If it is in
manual adjustment, it remains in manual
adjustment after changing [IRIS] to
[EXPOSURE].
Press the MENU button t select the
(CAMERA SET) with the SEL/PUSH
EXEC dial.
You can adjust the iris, gain and shutter speed
with the iris ring when is displayed next to
the values on the screen.
Adjustment for the gain and shutter speed can
be switched between [EXPOSURE] and
manual.
PROG.SCAN
You can capture progressive scan images
with a vertical resolution of 1,080 lines.
BOFF
– When you change [RING ASSIGN] from
[EXPOSURE] to [IRIS]
25 (
)
The adjustment remains in the same mode
that it was in prior to changing [RING
ASSIGN]. If it is in automatic adjustment, it
remains in automatic adjustment after
changing [EXPOSURE] to [IRIS]. If it is in
manual adjustment, it remains in manual
adjustment after changing [EXPOSURE] to
[IRIS].
Captures 25 frames per second.
b Note
• The captured images are converted to 50i format
and recorded on tape.
IRIS/EXPOSURE
Adjustments for the gain and shutter speed
can be switched between automatic and
manual.
x RING ASSIGN
You can select either [IRIS] (default
setting) or [EXPOSURE] as the function
• You can assign [RING ROTATE] to one of the
x RING ROTATE
You can select the rotation direction of the
iris ring.
GAIN SETUP
You can set gain values for H, M and L
positions of the gain switch. The default
settings of [H], [M] and [L] are 18dB, 9dB
and 0dB, respectively.
BNORMAL
Makes images dark with clockwise
rotation of the iris ring.
1Select [H], [M] or [L] with the SEL/
OPPOSITE
Makes images dark with counter-
clockwise rotation of the iris ring.
PUSH EXEC dial.
2Set the gain value with the SEL/PUSH
EXEC dial, and press the dial.
You can select the value between -6dB
and 21dB by 3dB. The larger the value,
the higher the gain.
b Notes
• When the AUTO/MANUAL switch is set to
AUTO, the IRIS/EXPOSURE button is not
available.
Continued ,
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select the
(CAMERA SET) with the SEL/PUSH EXEC dial.
3Select [OK] with the SEL/PUSH EXEC
AWB SENS
dial.
You can set the auto white balance
operation under a reddish light source such
as an incandescent lamp or candle, or under
a blueish light source such as in outdoor
shade.
4Press the MENU button to hide the
menu screen.
AGC LIMIT
You can select the upper limit for the Auto
Gain Control (AGC) from [OFF] (21dB, the
default setting), [18dB], [15dB], [12dB],
[9dB], [6dB], [3dB] and [0dB].
BINTELLIGENT
Automatically adjusts the white balance so
that scenes look natural for the light
source.
b Notes
HIGH
• If you adjust the gain manually, you cannot
obtain the effect of [AGC LIMIT].
Automatically adjusts the white balance
while reducing redness or blueness.
MIDDLE
LOW
MINUS AGC
When you set this function to [ON], the
automatic gain control range can be
Automatically adjusts the white balance
while increasing redness or blueness.
expanded to the negative range. Especially
in a bright environment, minus gain control
allows more suitable gain setting and
enables low noise recording. The dynamic
range of your camcorder is not reduced
when you set [MINUS AGC] to [ON].
b Notes
• This is only effective when white balance is
adjusted automatically.
• [AWB SENS] is not effective under a clear sky
or the sun.
BON
AE SHIFT
Enables minus gain control during
automatic gain control, as required.
You can set an offset value to adjust the
automatic exposure adjustment value
between [-7] (dark) and [+7] (bright) with
the SEL/PUSH EXEC dial. The default
OFF
Disables minus gain control during
automatic gain control.
setting is [0] .
and selected value
appears on the screen when you change the
value from the default setting.
WB PRESET
You can use the preset white balance. For
b Notes
• This function is not effective while you adjust
the iris, shutter speed and gain all manually.
• [AE SHIFT] is canceled when [EXPOSURE] is
manually adjusted.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
AE RESPONSE
BACK LIGHT
You can select the speed at which the
automatic exposure adjustment function
follows changes in the brightness of the
subject. You can select the speed from
[FAST], [MIDDLE] and [SLOW]. The
default setting is [FAST].
When you set this function to [ON] (.),
you can correct backlighting. The default
setting is [OFF].
b Notes
• [BACK LIGHT] is set to [OFF] when you set
[SPOTLIGHT] to [ON].
• [BACK LIGHT] is set to [OFF] when
[EXPOSURE] is manually adjusted.
AT IRIS LMT
• [BACK LIGHT] is set to [OFF] if at least two of
iris, gain, and shutter speed are adjusted
manually.
You can select the highest iris value for the
automatic adjustment from [F11], [F9.6],
[F8], [F6.8], [F5.6], [F4.8] and [F4]. The
default setting is [F11].
SPOTLIGHT
b Notes
When you set this function to [ON] ( ),
you can prevent overexposure of light
during recording of a subject under strong
light, such as a stage. For example, you can
prevent people's faces from over-
* This function is not effective during the manual
iris adjustment.
FLCKR REDUCE
highlighting. The default setting is [OFF].
BON
Reduces flickering. Flickering of the
screen under a light source such as
fluorescent lamps will be reduced.
b Notes
• [SPOTLIGHT] is set to [OFF] when you set
[BACK LIGHT] to [ON].
• [SPOTLIGHT] is set to [OFF] when
[EXPOSURE] is manually adjusted.
OFF
Not reduce flickering.
• [SPOTLIGHT] is set to [OFF] if at least two of
iris, gain, and shutter speed are adjusted
manually.
b Notes
• Flickering may not be reduced for certain light
sources.
STEADYSHOT
.
CNTRST ENHCR
x ON/OFF
When you select [ON], you can reduce
camera shakes. Select [OFF] ( ) when
you use a tripod (optional) to make images
look natural. The default setting is [ON].
When you set this function to [ON], your
camcorder detects high contrast images,
such as backlit scenes, and automatically
improves the unexposed images. The
default setting is [ON].
x TYPE
You can select a type of camera-shake
reduction for different recording situations.
b Notes
• When you set [BACK LIGHT] to [ON],
[CNTRST ENHCR] is temporarily disabled.
HARD
Reduces camera shakes at a high level.
This setting is not suitable for panorama
tilt recordings.
Continued ,
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select the
(CAMERA SET) with the SEL/PUSH EXEC dial.
selected effect or recording to fade out with
the selected effect.
BSTANDARD
Reduces camera shakes at a standard level.
2Press the REC START/STOP button.
The fader indicator stops flashing and
disappears when the fading is complete.
SOFT
Reduces camera shakes at a low level.
Slight unsteadiness remains in movies,
which make the movies look as they are.
To cancel before starting the operation,
select [OFF] in step 1.
The setting will be cleared every time you
press the REC START/STOP button.
WIDE CONV.
This is for use with wide conversion lenses
(optional). It is the optimum setting for use
with a Sony VCL-HG0872A wide
conversion lens.
STBY
REC
Fading out
Fading in
WHITE FADER
AF ASSIST
When you set this function to [ON], you
can temporarily focus manually using the
focus ring during the auto focus adjustment.
The default setting is [OFF].
BLACK FADER
HANDLE ZOOM
b Notes
• This function is automatically set to [OFF]
when you turn the power off and back on.
You can select the zoom speed for the FIX
position of the handle zoom switch from [1]
(slow) through [8] (fast). The default setting
is [3].
SMTH SLW REC (Smooth slow
recording)
D.EXTENDER
Fast moving subjects and actions, which
cannot be captured under the general
shooting conditions, can be shot in smooth
moving slow-motion.
This is useful to shoot fast actions such as a
golf or tennis swing.
When you set this function to [ON] (
the displayed image becomes 1.5 times
),
larger. The image quality decreases because
the image is digitally processed. This
function helps you to focus on far-away
subjects such as a wild bird away at a
distance. The default setting is [OFF].
Select [EXECUTE], and press the REC
START/STOP button on the [SMTH SLW
REC] screen.
An approximately 6-second recording is
stretched to about 24-seconds and recorded
as a slow-motion movie.
b Notes
• This function is automatically set to [OFF]
when you turn the power off and back on.
FADER
When [Recording...] disappears, recording
is finished.
You can add visual effects to transition
between scenes.
To cancel [SMTH SLW REC], press the
MENU button.
1Select [WHITE FADER] or [BLACK
FADER] during standby to fade in with the
66
Download from Www.Somanuals.com. All Manuals Search And Download.
z Tips
• When [
After executing [SMTH SLW REC] with
an ASSIGN button, you can also cancel
[SMTH SLW REC] by pressing the
details on how to use the ASSIGN buttons.
TRIG] is set to [ON], you can also
start recording by pressing the REC START/
STOP button.
• When you manually set the microphone volume
to a low level, [
properly. We recommend that you set [
TRIG LEVEL] to [MIDDLE] or [LOW].
TRIG] may not work
You can select the [SMTH SLW REC]
settings suitable for your recording.
x TIMING
INTERVAL REC
You can use this to select when recording
starts in relation to when the REC START/
STOP button is pressed.
You can record a series of movies on a tape
at regular intervals. This function is useful
to observe things like cloud movements or
daylight changes. The scenes run smoothly
into each other when you play back the
tape. Use the AC Adapter/Charger to obtain
AC power for long recording.
[6sec AFTER]*
[6sec CENTER]
Recording
Recording
Recording
interval
interval
1Select [ON/OFF] t [ON] with the SEL/
PUSH EXEC dial.
2Perform the following step if you are
changing the recording time from the
default setting of [0.5sec]. If you are
keeping the default recording time, go
straight to step 3.
[6sec BEFORE]
* The default setting is [6sec AFTER].
Select [REC TIME] t [0.5sec], [1sec],
[1.5sec] or [2sec] with the SEL/PUSH
EXEC dial.
x
TRIG
When you set this function to [ON],
recording automatically starts in response
to a preset sound level instead of the REC
START/STOP button being pressed.
3Perform the following step if you are
changing the interval time from the default
setting of [30sec]. If you are keeping the
default interval time, go straight to step 4.
Select [INTERVAL] t [30sec], [1min],
[5min] or [10min].
4Select [OK] with the SEL/PUSH EXEC
dial.
The [
TRIG] setting is canceled when
you turn the power off and back on.
x
TRIG LEVEL
You can select the sound level at which
recording is triggered from [HIGH],
[MIDDLE] and [LOW] in [
5Press the MENU button to hide the menu
screen.
6Press the REC START/STOP button.
TRIG
LEVEL]. The default setting is [HIGH].
b Notes
The [INTERVAL REC] recording starts.
• Sounds cannot be recorded.
• The recording time may be shorter than the set
time, depending on recording conditions.
To cancel [INTERVAL REC], press the
REC START/STOP button.
• The image quality is lower than with the regular
recording.
Continued ,
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select the
(CAMERA SET) with the SEL/PUSH EXEC dial.
4Move the subject and repeat step 3.
The operation of your camcorder differs
depending on when you press the REC
START/STOP button.
b Notes
• When you use frame recording continuously,
the remaining tape time will not be indicated
correctly.
• The last scene will be longer than other scenes.
• You cannot record index signals during frame
recording.
If you press the button during [INTERVAL
REC] recording, the recording temporarily
stops. If you press it again, the
[INTERVAL REC] recording restarts,
If you press the button during [INTERVAL
REC] interval, the [INTERVAL REC]
recording stops and regular recording starts.
If you press it again, regular recording
stops. If you press the button once again,
the [INTERVAL REC] recording restarts.
To cancel the [INTERVAL REC]
• This function is automatically set to [OFF]
when you turn the power off and back on.
SHOT TRANSITION
You can set [TRANS TIME] and [TRANS
the shot transition function.
recording, select [ON/OFF] t [OFF] with
the SEL/PUSH EXEC dial.
b Notes
x TRANS TIME
• The recording time and interval time may differ
slightly from the settings.
• If you focus manually, you can get sharp images
even if the lighting changes.
You can set the transition time between [3.5
sec] and [90.0 sec]. The default setting is
[4.0 sec].
• You can disable the beep during recording by
setting [BEEP] to [OFF].
x TRANS CURVE
You can select the transition curve.
The characteristics of the transition curves
are illustrated in the following graphs.
*1: parameter level
DV FRAME REC
You can record stop motion (or frame-by-
frame) animation movies. That type of
animation uses a technique of changing the
subject, such as a doll or a toy's positions
and recording it at each different position
while your camcorder sits still. Use the
Remote Commander to reduce camera
shakes.
*2: time
LINEAR
Make the transition linearly.
*1
*2
BOFF
Not use this function.
BSOFT STOP
Make the transition slowly at the end.
ON (
)
Records a movie by stop motion (or frame-
by-frame) technique.
*1
1Select [ON] with the SEL/PUSH
EXEC dial.
2Press the MENU button to hide the
menu screen.
*2
3Press the REC START/STOP button.
Your camcorder records a movie for
about 6 frames and returns to standby.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
SOFT TRANS
Make the transition slowly at the
beginning and end, and linearly in
between.
• This function is automatically set to [OFF]
when you turn the power off and back on.
x TYPE
• Selects a type of the color bars.
*1
*2
b Notes
• You cannot change [TRANS TIME] and
[TRANS CURVE] settings during store, check,
or execution of [SHOT TRANSITION]. Cancel
[SHOT TRANSITION] setting by pressing the
ASSIGN 4 button several times before changing
[TRANS TIME] or [TRANS CURVE] setting.
TYPE1
TYPE2
x.v.Color
When you set this function to [ON], you
can record with the wider color range. Your
camcorder can reproduce brilliant and vivid
colors for flowers and the beautiful blue-
green of tropical oceans that cannot be
matched by conventional technologies.
b Notes
TYPE3
• The colors may not be well reproduced when
you play back a movie recorded with this
function set to [ON] on a TV that does not
support x.v.Color.
• You cannot set [x.v.Color] in the following
cases:
– When recording in SD (standard) format
– When recording movies
• When you set [x.v.Color] to [ON], the picture
profile will be disabled.
TYPE4
(75% brightness of TYPE3)
COLOR BAR
x ON/OFF
When you select [ON], you can display
color bars on the screen or record them on a
tape. This function helps you to adjust
colors when you view movies recorded
with your camcorder on a TV or a monitor.
The default setting is [OFF].
69
Download from Www.Somanuals.com. All Manuals Search And Download.
(AUDIO SET) menu
Settings for the audio recording (DV
AU.MODE/DV AUDIO MIX, etc.)
MULTI-SOUND
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
You can select whether to play back audio
recorded using other devices with dual
sound or stereo sound.
menu items.
BSTEREO
Plays back with main and sub sound (or
stereo sound).
Press the MENU button t select the
(AUDIO SET) with the SEL/PUSH
EXEC dial.
1
Plays back with main sound (or the left
channel sound).
DV AU.MODE
(DV Audio mode)
2
12BIT(
)
Plays back with sub sound (or the right
channel sound).
Records in the 12-bit mode (2 stereo
sounds).
b Notes
• You can play back, but cannot record a dual
sound track cassette on your camcorder.
B16BIT (
)
Records in the 16-bit mode (1 stereo sound
with high quality).
DV AUDIO MIX
b Notes
• When recording in the HDV format, sound is
automatically recorded in [16BIT] mode.
You can monitor the sound dubbed from
another device or recorded through 4-
channel microphone during playback. You
can set how to output the sound.
AUDIO LIMIT
You can set the clipping-noise reduction
function.
BST1
Outputs the originally recorded sound
only.
BOFF
MIX
Disables the function.
Outputs the originally recorded sound
mixed with the dubbed sound.
ON
Enables the function.
ST2
b Notes
Outputs the dubbed sound only.
• This function is available only when you set the
AUDIO LEVEL switch to MAN.
b Notes
• This function is not effective, when you play
back a tape recorded with [DV AU.MODE] set
to [16BIT]
WIND
BON
Enables wind noise reduction.
OFF
Disables wind noise reduction.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
(DISPLAY SET)
menu
Display settings of the display and the
viewfinder (MARKER/VF B.LIGHT/DISP
OUTPUT, etc.)
BOFF
Does not display a histogram.
NORMAL
Displays a histogram.
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
menu items.
ADVANCE
Displays a histogram, and a bar that
indicates an average of the brightness
levels around the center of an image
(within the marker) on the histogram.
Press the MENU button t select the
(DISPLAY SET) with the SEL/PUSH
EXEC dial.
Average
ZEBRA
You can display a zebra pattern as a guide
for adjusting brightness.
Darker
Brightness
Brighter
x ON/OFF
When you select [ON],
and the
brightness level appear on the screen. The
zebra pattern will not be recorded on a tape
or a “Memory Stick Duo.”
z Tips
• The left area on the graph shows the darker
areas of the image while the right area shows the
brighter areas.
• A vertical line that indicates the brightness level
of [ZEBRA] will be displayed on the histogram
when you set [ZEBRA] to [ON].
x LEVEL
You can select the brightness level
between 70 and 100 or 100+.
z Tips
PEAKING
• The zebra pattern is a strip pattern displayed
over a part of an image on the screen when the
part is higher than a preset brightness level.
x ON/OFF
When you select [ON], you can display an
image on the screen with its details
enhanced. This function helps you to adjust
the focus. The default setting is [OFF].
HISTOGRAM
You can adjust the iris while referring to a
histogram. A histogram is a graph that
shows the distribution of the image
brightness. You can use the histogram as a
guide for adjusting the iris. The histogram
will not be recorded on a tape or a
“Memory Stick Duo.”
x COLOR
You can select the peaking color from
[WHITE], [RED] and [YELLOW]. The
default setting is [WHITE].
x LEVEL
You can select a peaking sensitivity from
[HIGH], [MIDDLE] and [LOW]. The
default setting is [MIDDLE].
Continued ,
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select the
(DISPLAY SET) with the SEL/PUSH EXEC dial.
b Notes
• You cannot record an image with enhanced
details on a tape or a “Memory Stick Duo.”
EXP.FOCUS TYPE
You can set a type of the expanded focus
display.
z Tips
BTYPE1
Simply enlarges images.
• You can focus more easily using this function in
combination with the expanded focus function
TYPE2
Enlarges and shows images in white and
black.
MARKER
x ON/OFF
When you select [ON], you can display
markers. The default setting is [OFF].
Markers will not be recorded on a tape or
“Memory Stick Duo.”
CAM DATA DSP (Camera data
display)
When you set this function to [ON], you
can constantly display the iris, shutter speed
and gain settings on the screen. The default
setting is [OFF].
x CENTER
When you select [ON], you can display a
marker at the center of the screen. The
default setting is [ON].
60min
0:00:00
x GUIDEFRAME
When you select [ON], you can display
frame markers that help you to check
horizontal and vertical positions of a
subject. The default setting is [OFF].
Iris value
Shutter speed value
Gain value
z Tips
• The settings appear on the screen during the
manual adjustment regardless of the settings of
this function.
b Notes
• You cannot output display information, such as
the time code, to an external device when
[MARKER] is set to [ON].
•
indicates that the settings are automatically
adjusted values.
• The displayed settings are different from the
settings that will be displayed when you press
z Tips
• You can display the center marker and the
guideframe marker at the same time.
• You can obtain a balanced composition by
positioning the subject at the cross points of the
guideframe marker.
• You can display markers only on the LCD panel
and viewfinder. You cannot display them on an
external device.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
AU.LVL DISP (Audio level display)
VF B.LIGHT
When you set this function to [ON], you
can display the audio level meter on the
screen. The default setting is [ON].
You can adjust the brightness of the
viewfinder.
BNORMAL
Standard brightness.
BRIGHT
Brightens the viewfinder screen.
b Notes
• When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
Audio level meter
• When you select [BRIGHT], the recordable
time with the battery is slightly reduced.
LCD BRIGHT
You can adjust the brightness of the LCD
screen with the SEL/PUSH EXEC dial.
Changes in the LCD brightness will not
affect the brightness of recording images.
VF POWERMODE
BAUTO
Turns on the viewfinder while you close
the LCD panel or record in mirror mode.
z Tips
ON
Always turns on the viewfinder.
LCD COLOR
LETTER SIZE
You can adjust the LCD color intensity
using the SEL/PUSH EXEC dial. Changes
in the LCD color level will not affect the
color level of recording images.
BNORMAL
Displays the menu in regular letter size.
2x
Displays the selected menu items in letter
size, the height of which is doubled.
LCD BL LEVEL
You can adjust the brightness of the LCD
screen’s backlight.
REMAINING
BAUTO
BNORMAL
Displays the remaining time of a tape for
about 8 seconds in the following situation:
• When you set the POWER switch to VCR
or CAMERA with a cassette inserted.
Standard brightness.
BRIGHT
Brightens the LCD screen.
• When you press N (Play) or the
DISPLAY/BATT INFO button.
b Notes
• When you connect your camcorder to outside
power sources, [LCD BL LEVEL] is
automatically set to [BRIGHT].
• When you select [BRIGHT], the recordable
time with the battery is slightly reduced.
ON
Always displays the remaining time of a
tape. The remaining time is not displayed
when you insert a new tape or a tape that is
Continued ,
73
Download from Www.Somanuals.com. All Manuals Search And Download.
(IN/OUT REC)
Press the MENU button t select the
(DISPLAY SET) with the SEL/PUSH
EXEC dial.
menu
Recording settings, input and output
settings (VCR HDV/DV/DV REC MODE/ DV
WIDE REC/ TV TYPE, etc.)
rewound to the beginning. It is displayed
when you start playback or recording.
DISP OUTPUT
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
You can select outputs to which display
information, such as time code, is
outputted.
menu items.
BLCD PANEL
Press the MENU button t select the
(IN/OUT REC) with the SEL/PUSH
EXEC dial.
Outputs the information to the LCD screen
and viewfinder.
V-OUT/PANEL
Outputs the information to the LCD
screen, viewfinder and composite output.
REC FORMAT
ALL OUTPUT
You can select a recording format.
Outputs the information to the LCD
screen, viewfinder, HDMI output,
component output and composite output.
BHDV1080i (
)
Records in the HDV1080i format.
DV (
)
b Notes
Records in the DV format.
Set also [DV REC MODE] when you
record in this format.
• You can output display information only to the
viewfinder and the LCD screen when
[MARKER] is set to [ON].
b Notes
• Set also [i.LINK CONV] as necessary when you
output a movie to an external device through an
VCR HDV/DV
You can select a type of output signal to an
external device for playing back a movie on
the device. Select [AUTO] in most cases.
When you connect your camcorder to an
external device with an i.LINK cable, select
a type of input and output signals to and
from the external device via the HDV/DV
jack. You can record or play back a movie
reproduced by the selected type of signals.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
BAUTO
Automatically switches between HDV
signals and DV signals during playback.
DV REC MODE (DV Recording
mode)
During the i.LINK connection, recognizes
HDV signals and DV signals, and
automatically inputs or outputs the signals
to or from the external device via the
HDV/DV (i.LINK) jack for recording or
playback.
This function is available only when you
set [REC FORMAT] to [DV].
BSP (SP)
Records in the SP (Standard Play) mode on
a cassette.
HDV (
)
LP (LP)
Plays back only HDV format sections of a
tape.
Increases the recording time to 1.5 times
the SP mode (Long Play).
During the i.LINK connection, inputs or
outputs only HDV signals to or from an
external device via the HDV/DV
(i.LINK) jack for recording or playback.
Select this setting when you connect your
camcorder to your computer.
b Notes
• If you record in the LP mode, a mosaic-like
noise may appear or sound may be interrupted
when you play back the tape on other
camcorders or VCRs.
• When you mix recordings in the SP mode and in
the LP mode on one tape, the playback picture
may be distorted or the time code may not be
written properly between the scenes.
DV (
)
Plays back only DV format sections of a
tape.
• You cannot choose the LP mode for the HDV
format recording.
During the i.LINK connection, inputs or
outputs only DV signals to or from an
external device via the HDV/DV
(i.LINK) jack for recording or playback.
Select this setting when you connect your
camcorder to your computer.
DV WIDE REC
You can record a movie in an aspect ratio
that matches that of a TV that you want to
connect. Refer also to the instruction
manuals that come with the TV.
b Notes
• Make sure to disconnect the i.LINK cable prior
to changing the setting. Otherwise, a video
device may not recognize video signals.
BON
Records a movie in an aspect ratio that
matches the full screen of a 16:9 (wide)
TV.
• When you select [AUTO], images and sounds
may be cut off on switching between HDV
signals and DV signals.
• When you set [i.LINK CONV] to [ON], the
following signals will be outputted:
– [AUTO]: HDV signals are converted to DV
signals and outputted.
OFF (
)
Records a movie in an aspect ratio that
matches the full screen of a 4:3 TV.
DV signals are outputted without any
conversion.
– [HDV]: HDV signals are converted to DV
signals and outputted. DV signals will not be
outputted.
– [DV]: DV signals are outputted without any
conversion. HDV signals will not be
outputted.
b Notes
• Set [TV TYPE] correctly to suite a TV that you
• The aspect ratio will be fixed to 16:9 and you
cannot set it to 4:3 when you record in HDV
format.
Continued ,
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select the
(IN/OUT REC) with the SEL/PUSH EXEC dial.
B16:9
COMPONENT
Select to view your pictures on a 16:9
(wide) TV.
You can select [576i] or [1080i/576i]
depending on your TV when you connect
your camcorder to a TV via a component
A/V cable.
HDV/DV (16:9)
format pictures
DV (4:3) format
pictures
576i
Supports connection between your
camcorder and a TV with a component
input jack that supports the 576i format.
4:3
B1080i/576i
Select to view your pictures on a 4:3
standard TV.
Supports connection between your
camcorder and a TV with a component
input jack that supports the 1080i format.
HDV/DV (16:9)
format pictures
DV (4:3) format
pictures
i.LINK CONV
You can convert signals in HDV format to
DV format, and output pictures in DV
format from the HDV/DV interface
(i.LINK).
b Notes
• This is not effective for the i.LINK output.
BOFF
Outputs the pictures from the HDV/DV
interface (i.LINK) in accordance with the
settings in [REC FORMAT] and [VCR
HDV/DV].
ON
Pictures in HDV format are converted to
DV format, and pictures in DV format are
output in DV format.
b Notes
• For input signal via an i.LINK connection, see
• Disconnect the i.LINK cable before setting
[i.LINK CONV]. Otherwise, the connected
video device may not be able to recognize the
video signal from your camcorder.
TV TYPE
You need to convert the signal depending
on a type of your TV when playing back the
picture. The recorded pictures are played
back as following illustrations.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
(MEMORY SET)
menu
Settings for the “Memory Stick Duo” (ALL
ERASE/FORMAT, etc.)
FORMAT
You do not need to format the “Memory
Stick Duo” since it is already formatted at
the factory. If you want to format the
“Memory Stick Duo,” select
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
[YES]t[YES].
menu items.
b Notes
• Do not do any of the following while
Press the MENU button t select the
(MEMORY SET) with the SEL/PUSH
EXEC dial.
[
Formatting...] is displayed:
– Operate the POWER switch/buttons.
– Eject the “Memory Stick Duo.”
• Formatting erases everything on the “Memory
Stick Duo” including protected image data and
newly created folders.
ALL ERASE
You can delete all the still images without
image protection on a “Memory Stick Duo”
or in the selected folder.
FILE NO.
1Select [ALL FILES] or [CURRENT
FLDR].
BSERIES
Assigns file numbers in sequence even if
the “Memory Stick Duo” is replaced with
another one. The file number is reset when
a new folder is created or the recording
folder is replaced with another.
[ALL FILES]: Deletes all the images on
the “Memory Stick Duo.”
[CURRENT FLDR]: Deletes all the
images in the currently selected folder.
2Select [YES] t [YES] with the SEL/
PUSH EXEC dial.
RESET
Resets the file number to 0001 each time
the “Memory Stick Duo” is changed.
[
Erasing all data...] appears.
[Completed.] appears when all unprotected
images are deleted.
NEW FOLDER
b Notes
• Release the write protect tab on the “Memory
Stick Duo” beforehand for the “Memory Stick
• The folder will not be deleted even when you
delete all the images in the folder.
When you select [YES], you can create a
new folder (102MSDCF to 999MSDCF) on
a “Memory Stick Duo.” When a folder is
full (a maximum of 9,999 images are
stored), a new folder is automatically
created.
• Do not do any of the following while
[
Erasing all data...] is displayed:
– Operate the POWER switch/buttons.
– Eject the “Memory Stick Duo.”
b Notes
• You cannot delete the new folder once you have
created it on your camcorder. Format the
computer.
• The number of recordable pictures on a
“Memory Stick Duo” may decrease as the
number of folders increases.
Continued ,
77
Download from Www.Somanuals.com. All Manuals Search And Download.
(OTHERS) menu
Press the MENU button t select the
(MEMORY SET) with the SEL/PUSH
EXEC dial.
Settings while recording on a tape or other
basic settings (QUICK REC/BEEP, etc.)
REC FOLDER (Recording folder)
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
menu items.
You can select a folder in which you want
to store still images.
Select the folder with the SEL/PUSH
EXEC dial.
Press the MENU button t select the
(OTHERS) with the SEL/PUSH EXEC
dial.
z Tips
• The still images will be stored in the
101MSDCF folder by default.
• Once you store the still images in the current
folder, the folder is selected as a playback
folder.
CAMERA PROF. (Camera profile)
You can save up to two camera setting
profiles in your camcorder. Using these
saved profiles let you quickly obtain
suitable camera settings later.
PB FOLDER (Playback folder)
You can select a folder in which still
images you want to view are stored.
Select the folder with the SEL/PUSH
EXEC dial.
z Tips
• You can save menu settings, picture profiles and
button settings as a camera profile.
x To load a camera profile
You can load a camera profile and use it on
your camcorder.
1Select [LOAD] with the SEL/PUSH
EXEC dial.
2Select the camera profile that you want
to load with the SEL/PUSH EXEC dial.
3Select [YES] in the check screen.
Your camcorder is restarted and the
selected camera profile becomes
effective.
x To save camera profile settings
1Select [SAVE] by the SEL/PUSH
EXEC dial.
2Select [NEW FILE] or an existing
profile name by turning the SEL/PUSH
EXEC dial.
3Select [YES] in the check screen by
turning the SEL/PUSH EXEC dial.
The camera profile settings are saved.
z Tips
• If you select [NEW FILE], profile name is set to
[CAM1] or [CAM2].
• If you select an existing camera profile as a
destination, the camera profile is overwritten.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
x To change the camera profile name
You can change the camera profile name.
WORLD TIME
1Select [PROFILE NAME] with the
SEL/PUSH EXEC dial.
2Select the camera profile of which you
want to change the name with the SEL/
PUSH EXEC dial.
[PROFILE NAME] screen appears.
3Change the profile name with the SEL/
When you use your camcorder abroad, you
can adjust the clock to the local time by
setting the time difference with the SEL/
PUSH EXEC dial.
When you set the time difference to 0, the
clock returns to the original setting.
PUSH EXEC dial.
LANGUAGE
z Tips
You can select the language to be used on
the LCD screen.
•You can enter the name in the same way
4Select [OK] with the SEL/PUSH
EXEC dial.
Profile name is changed.
z Tips
• Your camcorder offers [ENG[SIMP]]
(simplified English) in case that you cannot find
your native tongue among the options.
x To delete camera profile settings
1Select [DELETE] with the SEL/PUSH
EXEC dial.
2Select the camera profile you want to
PB ZOOM (Playback zoom)
When you set this function to [ON], you
can enlarge movie images about 1.1 to 5
times (still images about 1.5 to 5 times)
with the handle zoom lever. The default
setting is [OFF]. To end the zoom, press
and hold the W side of the handle zoom
lever until it stops.
delete with the SEL/PUSH EXEC dial.
3Select [YES] on the check screen.
ASSIGN BTN
z Tips
PHOTO/EXP.FOCUS
• To move the zoom horizontally, press the SEL/
PUSH EXEC dial, then turn the dial. To move
the zoom vertically, press the SEL/PUSH EXEC
dial one more time, then turn the dial.
You can select a function to assign to the
PHOTO/EXPANDED FOCUS button.
BPHOTO
QUICK REC
EXP.FOCUS
You can slightly reduce the recording start
point time when resuming recording by
changing the POWER switch from OFF
(CHG) to CAMERA.
Functions as the EXPANDED FOCUS
b Notes
• If [EXP.FOCUS] is selected, you cannot record
still images with the main unit button. Please
use the PHOTO button on the Remote
Commander.
BOFF
It takes some time to restart recording from
the state that the drum has stopped
rotating, but the transition from the last
recorded scene is smooth.
CLOCK SET
Continued ,
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select the
(OTHERS) with the SEL/PUSH EXEC dial.
ON (
)
The time shortens slightly until recording
restarts from the state that the drum has
stopped rotating, but the transition from
the last recorded scene may not be smooth.
Select this when you do not want to miss a
recording chance.
z Tips
• When this function is set to [ON], the interval
between scenes freezes for a moment (editing on
your computer is recommended).
• When the camcorder is left in standby for more
than about 3 minutes, your camcorder exits from
standby (the drum stops rotating) to prevent tape
wear and battery loss. Since the power does not
turn off, you can restart recording by pressing
the REC START/STOP button again.
BEEP
BON
Activates a melody when you start/stop
recording.
OFF
Cancels the melody.
REC LAMP (Recording lamp)
When you set this function to [OFF], you
can turn off the camera recording lamps
during recording. The default setting is
[ON].
REMOTE CTRL (Remote control)
When you set this function to [ON], you
can use the supplied Remote Commander
(p. 122). The default setting is [ON].
z Tips
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Editing
Dubbing to VCR, DVD/HDD device, etc.
Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for
connected.
Connecting to external devices
The connection method and the image quality will differ depending on the VCR, DVD/HDD
device and the connectors used.
Jacks on your camcorder
Open the jack cover and connect the cable.
1
2
Continued ,
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing to VCR, DVD/HDD device, etc. (Continued)
: Signal flow
External device
Camcorder
Cable
HDV1080i compatible
device
t HD quality*
i.LINK cable (optional)
1
• i.LINK jack which is compatible with HDV1080i specification is required on the external device.
AV device with i.LINK jack
i.LINK cable (optional)
t SD quality*
1
AV device with S VIDEO jack
t SD quality*
A/V connecting cable with
S VIDEO (optional)
2
(White)
(Red)
(Yellow)
AV device with audio/video
jacks**
t SD quality*
A/V connecting cable
(supplied)
2
(Yellow)
(White)
(Red)
* Pictures recorded in the DV format are dubbed in the SD (standard definition) quality, regardless of the
connection.
**When connecting your camcorder to a monaural device, connect the yellow plug of the A/V connecting
cable to the video jack on the device, and connect the white (left channel) or red (right channel) plug to
the audio jack on the device.
b Notes
• You cannot dub pictures using the HDMI cable.
Using an i.LINK cable (optional)
The dubbed format (HDV/DV) differs depending on the recording format or the format
supported by the VCR/DVD device. See the table below for selecting the appropriate settings,
and perform necessary menu setting.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
• Disconnect the i.LINK cable before changing these menu settings, otherwise the VCR/DVD device may
not correctly identify the video signal.
z Tips
• This camcorder has a 4-pin i.LINK terminal. Select a cable that fits the terminal on the device to be
connected.
Format supported by the
Menu setting
Camcorder
recording
format
VCR/DVD device
Copy format
HDV
[VCR HDV/DV] [i.LINK CONV]
DV format
1
format*
Copy HDV recording as
HDV
3
HDV
HDV
–*
[OFF]
Convert HDV recording to
DV
[AUTO]
HDV
DV
DV
DV
DV
DV
[ON]
Copy DV recording as DV
[OFF]
When tape is recorded in both HDV and DV format
Convert both HDV and DV
HDV/DV
DV
DV
[AUTO]
[HDV]
[ON]
format to DV
3
Copy only portions
HDV
DV
HDV
–*
[OFF]
recorded in HDV format
2
3
–*
–*
2
2
Copy only portions
recorded in DV format
HDV
DV
–*
–*
[DV]
[OFF]
DV
DV
*1 Recording device compliant with the HDV1080i specification.
*2 The tape advances, but no video or sound is recorded (blank).
*3 Picture is not recognized (no recording is made).
b Notes
• When [VCR HDV/DV] is set to [AUTO], and the signal switches between HDV and DV formats, the
picture and sound are interrupted temporarily.
• When the player and the recorder are both HDV1080i compatible devices such as HDR-FX1000E and
connected with the i.LINK cable, after pausing or stopping and then resuming the recording, the images
will be a bit choppy or rough at that point.
• Set [DISP OUTPUT] to [LCD PANEL] (the default setting) when connecting with an A/V connecting
When connecting with the A/V connecting cable with S VIDEO (optional)
Connect with S VIDEO jack instead of the video plug (yellow). This connection produces
pictures more faithfully. This connection produces higher quality DV format pictures. The
audio will not be output when you connect with the S VIDEO cable alone.
Continued ,
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing to VCR, DVD/HDD device, etc. (Continued)
b Notes
Dubbing to another device
• The following cannot be output via the HDV/
DV interface (i.LINK):
– Indicators
– Titles that are recorded on other camcorder
• Pictures recorded in the HDV format are not
output from the HDV/DV interface (i.LINK)
jack during playback pause or in any playback
mode other than normal playback.
1
Prepare your camcorder for
playback.
Insert the recorded cassette.
Slide the POWER switch to VCR.
• Note the following when connecting with an
i.LINK cable:
– The recorded picture becomes rough when a
picture is paused on your camcorder while
recording to a VCR/DVD device.
– Data codes (date/time/camera settings data)
may not be displayed or recorded depending
on the device or application.
– You cannot record the picture and sound
separately.
• When dubbing to a DVD recorder from your
camcorder through an i.LINK cable, you may
not operate your camcorder on your DVD
recorder even if its instruction manual says you
can. If you can set the input mode to HDV or
DV on your DVD recorder and can input/output
pictures, follow the steps in “Using an i.LINK
Set [TV TYPE] according to the
2
Prepare your VCR/DVD device for
recording.
When dubbing to the VCR, insert a
cassette for recording.
When dubbing to the DVD recorder,
insert a DVD for recording.
If your recording device has an input
selector, set it to the appropriate input
(such as video input1 and video input2).
3
4
Connect your VCR/DVD device to
your camcorder as a recording
device.
z Tips
• To record the date/time and camera settings data
when connected by the A/V connecting cable,
display them on the screen.
• When you use an i.LINK cable, the video and
sound signals are transmitted digitally,
producing high quality pictures.
Start playback on the camcorder,
and recording on the VCR/DVD
device.
• When an i.LINK cable is connected, the format
of the output signal (
) will be indicated on the LCD screen of
your camcorder.
or
Refer to the operating instructions
supplied with your recording device for
details.
5
When dubbing is complete, stop
your camcorder and the VCR/DVD
device.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording pictures from a VCR
You can record pictures from a VCR on a
tape. You can record a scene as a still image
HDV1080i
compatible device
AVdevicewith
i.LINK jack
on a “Memory Stick Duo.” You can record
pictures in the HDV format by connecting
an HDV1080i specification compatible
device. Be sure to insert a cassette or a
“Memory Stick Duo” for recording in your
camcorder beforehand.
t HD quality
t SD quality
You can connect your camcorder to a VCR
device using an i.LINK cable.
To i.LINK connector
Connect your camcorder to the wall outlet
(wall socket) using the supplied AC
also to the instruction manuals supplied
with the devices to be connected.
b Notes
: Signal
flow
• You need an i.LINK cable for this operation.
i.LINK cable
(optional)
• You cannot perform this operation with the A/V
connecting cable.
• Your camcorder has a 4-pin i.LINK terminal.
Select a cable that fits the terminal on the device
to be attached.
To HDV/DV
interface (i.LINK)
* An i.LINK jack which is compatible with
HDV1080i specification is required.
Continued ,
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording pictures from a VCR (Continued)
Recording movies
1
2
Set the POWER switch to VCR.
Set the input signal of your
camcorder.
Set [VCR HDV/DV] to [AUTO] when
recording from an HDV format
compatible device.
Set [VCR HDV/DV] to [DV] or
[AUTO] when recording from a DV
6
Start playing the cassette on your
VCR.
The picture played on the VCR appears
on the LCD screen of your camcorder.
3
Connect your VCR as a player to
your camcorder.
7
8
Press X (PAUSE) again at the
point you want to start recording.
When an i.LINK cable is connected, the
format of the input signal (
or
) will be
indicated on the LCD screen of your
camcorder (This indicator may appear
on the screen of the playback device but
it will not be recorded).
Press x (STOP) to stop
recording.
b Notes
• You cannot record TV programs from the
HDV/DV interface (i.LINK).
• You can record pictures from DV devices only
in the DV format.
• Note the following when connecting with an
i.LINK cable:
4
5
Insert a cassette into the VCR.
Set your camcorder to recording
pause.
While pressing X (PAUSE), press both
z REC (record) buttons
simultaneously.
– The recorded picture becomes rough when a
picture is paused on your camcorder while
recording to a VCR.
– You cannot record the picture and sound
separately.
– If you pause or stop the recording and restart
it, the picture may not be recorded smoothly.
z Tips
• When a 4:3 video signal is input, it appears with
black bands on the right and left sides on the
screen of your camcorder.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording still images
Be sure to insert a “Memory Stick Duo” for
recording in your camcorder beforehand,
and set [PHOTO/EXP.FOCUS] to
1
2
Perform steps 1 to 4 in
“Recording movies.”
Start playing the cassette.
The pictures on the VCR appear on the
screen of your camcorder.
3
Press the PHOTO/EXPANDED
FOCUS button on your camcorder
or the PHOTO button on the
Remote Commander at the scene
you want to record.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a Computer
Copying movies on a tape to a computer
Connect your camcorder to the computer
with an i.LINK cable.
Format for
Recorded
format
copying to
Menu setting*
The computer needs to have an i.LINK
connector and be installed with editing
software that can copy video signals. The
software required depends on the format of
the recorded pictures and the format for
copying to the computer (HDV or DV) as
shown in the table below.
the computer
[VCR HDV/DV]
t [HDV]
[i.LINK CONV]
t [OFF]
HDV
HDV
DV
HDV
DV
[VCR HDV/DV]
t [HDV]
[i.LINK CONV]
t [ON]
Format for
Recorded
copying to
Required software
format
the computer
[VCR HDV/DV]
t [DV]
[i.LINK CONV]
t [OFF]
Editing software
capable of
copying HDV
signal
DV
HDV
HDV
DV
Editing software
capable of
copying DV
signal
HDV
z Tips
• To copy HDV format images as they are
without changing their format, an HDV
compatible environment is required.
For details, refer to your software instruction
manual or contact the software manufacturer.
• To play movies by a regular DVD player, you
need to create DVD video in the SD format. the
DVD video is not in the HDV format.
Editing software
capable of
copying DV
signal
DV
DV
b Notes
• The HDV/DV jack of your camcorder does
not have a power-supply function.
Step:1 Connect an i.LINK cable
• When you connect your camcorder to a
computer via an i.LINK cable, make sure that
the terminals of the i.LINK cable are placed the
right way. Squeezing the terminals into jacks
may damage the terminals and jacks, or result in
a malfunction of your camcorder.
• You cannot copy image data stored on a
“Memory Stick Duo” onto your computer via an
i.LINK cable.
• Refer to the operating instructions of the
software for the details on image copying.
HDV/DV interface
(i.LINK)
• Refer to the operating instructions of the editing
software for the recommended connection.
i.LINK cable (optional)
• Some editing software on the computer may not
work correctly.
• You cannot change format DV to HDV.
The required menu settings vary depending
on the recorded images and the format
(HDV or DV) to be copied to the computer.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
z Tips
Notes on connecting to the computer
• Check the specs, features and latest information
of your software on the software manufacturer's
website.
• When images recorded in HDV format are
copied to a computer, the file size is about 2GB
(almost the same as a DV file) for a 10-minute
movie if the video compression format is
MPEG2.
• Connect the i.LINK cable to the computer first,
then to your camcorder. Connecting in the
opposite order may cause static electricity to
build up, resulting in a malfunction of your
camcorder.
• The computer may freeze or may not recognize
the signal from your camcorder in the following
situations.
– Connecting your camcorder to a computer
that does not support the video signal formats
appearing on the LCD screen of your
camcorder display (HDV or DV).
connected with an i.LINK cable.
When copying the movie in the HDV
format from the computer to your
camcorder
Set [VCR HDV/DV] to [HDV] and [i.LINK
– Changing [REC FORMAT] setting while
connected with an i.LINK cable with the
– Changing the POWER switch position while
connected with an i.LINK cable.
• The format (HDV or DV) of input/output signal
appears on the LCD screen of your camcorder
while connected with an i.LINK cable.
b Notes
• To copy an HDV format movie edited on a
computer back onto a tape in HDV format is
possible so long as your editing software
supports copying HDV movies onto tape. For
details, contact the software manufacturer.
When copying the movie in the DV
format from the computer to your
camcorder
Step:2 Copying the movies
Use the supplied AC Adaptor to obtain AC
1Prepare editing software (not provided).
2Turn on your computer.
3Insert a tape into your camcorder and set
the POWER switch to VCR.
4Set the menu of your camcorder.
The menu settings vary depending on
the copying image.
5Copy images to the computer with your
software.
b Notes
• If images are copied in HDV format but are not
recognized, your editing software may not
support HDV format. Convert the images to DV
format according to step 4and copy again.
• A tape recorded in DV format cannot be copied
to a computer in HDV format.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying still images to a computer
B Folder containing image files recorded
System requirements
by your camcorder when no new folders
have been created, only [101MSDCF] is
displayed.
• For details on precautions and compatible
application software, refer also to the operating
instructions of the device to be connected.
• Required hardware: “Memory Stick Duo” slot,
“Memory Stick” Reader/Writer compatible with
“Memory Stick Duo.”
C Folder containing movie data recorded
by other camcorders without the folder
creation function (for playback only)
Folder
101MSDCF (up DSC0ss Still image
to 999MSDCF) ss.JPG file
File
Meaning
Copying the pictures
For Windows users
You can copy still images stored on a
“Memory Stick Duo” to your computer via
the “Memory Stick Duo” slot of your
computer.
ssss are numbers between 0001 and
9999.
For Macintosh users
Double-click the drive icon, then drag and
drop the desired picture file onto the hard
disk of your computer.
1Turn on your computer.
2Insert the “Memory Stick Duo” into the
“Memory Stick Duo” slot of your
computer.
3Double-click the [Removable Disk]
icon displayed in [My Computer]. Then,
drag and drop a still image from the
folder onto the hard disk drive of your
computer.
1
2
3
A Folder containing image files recorded
by other camcorders without the folder
creation function (for playback only).
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Troubleshooting
If you run into any problems using your camcorder, use the following table to troubleshoot the
problem. If the problem persists, disconnect the power source and contact your Sony dealer.
• Power sources/LCD screen/Remote Commander···p. 91
• Cassette tapes/“Memory Stick Duo”···p. 92
• Recording···p. 93
• Playback···p. 96
• Connecting to TV···p. 97
• Dubbing/Editing/Connecting to other devices···p. 98
• Connecting to a computer···p. 100
Power sources/LCD screen/Remote Commander
The power does not turn on or abruptly turns off.
The camcorder does not operate even when the power is set to on.
• Disconnect the AC Adaptor from the wall outlet (wall socket) or remove the battery pack,
then reconnect it after about 1 minute.
The camcorder gets warm.
• The camcorder may get warmer while you use it. This is not a malfunction.
The CHG lamp does not light while the battery pack is being charged.
• Connect the power cord (mains lead) to the wall outlet (wall socket) properly.
The CHG lamp flashes while the battery pack is being charged.
the AC Adaptor from the wall outlet (wall socket) and contact your Sony dealer. The battery
pack may be damaged.
• When the battery pack is too hot or cold, the CHG lamp may flash slowly, indicating that the
battery pack cannot be charged.
The remaining battery time indicator does not indicate the correct time.
• Ambient temperature is too high or too low, or the battery pack has not been charged enough.
This is not a malfunction.
• Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace
Continued ,
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
• The indicated time may not be correct in certain circumstances. For example, when you open
or close the LCD panel, it takes about 1 minute to display the correct remaining battery time.
The battery pack discharges too quickly.
• Ambient temperature is too high or low, or the battery pack has not been charged enough.
This is not a malfunction.
• Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace
The picture remains on the LCD screen.
• This occurs if you disconnect the DC plug or remove the battery pack without turning off the
power first. This is not a malfunction.
The picture in the viewfinder is not clear.
The picture in the viewfinder has disappeared.
• If you change [VF POWERMODE] to [AUTO], the finder light remains off while the LCD
The supplied Remote Commander does not function.
• Remove any obstructions between the Remote Commander and the remote sensor.
• Keep strong light sources, such as sunlight or overhead lighting, away from the remote
sensor, otherwise the Remote Commander may not function properly.
• Insert a fresh battery in the compartment with its +/– terminals matching those of the
Another VCR malfunctions when you use the supplied Remote Commander.
• Select a commander mode other than VTR 2 for your VCR.
• Cover the sensor of your VCR with black paper.
Cassette tapes/“Memory Stick Duo”
The cassette cannot be ejected from the compartment.
The Cassette Memory indicator or title display does not appear while using a
cassette with the Cassette Memory function.
• This camcorder does not support the Cassette Memory function, so the indicator does not
appear.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
The remaining tape indicator is not displayed.
• Set [
The cassette is noisier during rewinding or fast-forwarding.
• When using the AC Adaptor, rewind/fast forward speed increases (compared with battery
operation) and therefore increases noise. This is not a malfunction.
You cannot delete pictures of the “Memory Stick Duo.”
• The pictures are protected. Release the protect function on your computer, etc.
Recording
If you are playing back pictures stored on a “Memory Stick Duo,” see also the Cassette tapes/
The recording does not start when you press the REC START/STOP button.
• The tape has reached the end. Rewind it, or insert a new cassette.
• The tape is stuck to the drum due to moisture condensation. Remove the cassette and leave
The handle zoom does not work.
You cannot record on the “Memory Stick Duo.”
• The “Memory Stick Duo” is full. Delete unnecessary pictures recorded on the “Memory Stick
• Format the “Memory Stick Duo” on your camcorder or insert another “Memory Stick Duo”
• You cannot record still images on the “Memory Stick Duo” in the following cases.
– While executing [FADER]
– While executing [SMTH SLW REC]
– When the shutter speed is slower than 1/50
– While using shot transition
You cannot record a smooth transition on a tape from the last recorded scene
to the next.
• Do not remove the cassette (the picture will be recorded continuously without a break even
when you turn the power off).
• Do not record pictures in the HDV and DV formats on the same tape.
Continued ,
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
• Do not record pictures in SP mode and LP mode on the same tape.
• Avoid stopping then recording a movie in the LP mode.
The shutter sound is not heard when you record a still image.
• There is no shutter sound while during movie shooting.
End search does not work.
• There is nothing recorded on the cassette.
• There is a blank section between recorded sections of the tape. This is not a malfunction.
Automatic focus does not function.
Menu items are grayed out or does not work.
• You cannot select gray out display items in the current recording/playback situation.
• There are some functions you cannot activate simultaneously. The following list shows
examples of unworkable combinations of functions and menu items.
Cannot use
Situation
[PROG.SCAN]
[CNTRST ENHCR]
[BACK LIGHT]
[INTERVAL REC] is set to [ON].
[BACK LIGHT] is set to [ON].
Two or more of the iris, gain and shutter speed are set
manually.
[EXPOSURE] is manually adjusted.
[SPOTLIGHT] is set to [ON].
[SPOTLIGHT]
[FADER]
Two or more of the iris, gain and shutter speed are set
manually.
[EXPOSURE] is manually adjusted.
[BACK LIGHT] is set to [ON].
No tape is inserted.
Moisture condensation has occurred inside the camcorder.
The write-protect tab on the cassette is set to SAVE.
[INTERVAL REC] is set to [ON].
[ZEBRA], [PEAKING],
[CAM DATA DSP],
[HISTOGRAM]
[COLOR BAR] is set to [ON].
[SMTH SLW REC]
[PROG.SCAN] is set to [25].
[COLOR BAR] is set to [ON].
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Cannot use
Situation
[LCD BL LEVEL],
[VF B.LIGHT]
AC power source is being used.
[WORLD TIME]
[x.v.Color]
Date and time are not set.
[REC FORMAT] is set to [DV].
[PROG.SCAN] is set to [25].
[REC FORMAT] is set to [HDV1080i].
[INTERVAL REC]
[DV FRAME REC]
Shutter speed, gain, white balance or iris cannot be adjusted manually.
• Set the AUTO/MANUAL switch to MANUAL.
Tiny spots in white, red, blue, or green appear on the screen.
The subjects passing by the frame very fast appear crooked.
• This is called the focal plane phenomenon. This is not a malfunction. Because of the way that
the image device (CMOS sensor) reads out image signals, the subjects passing by the frame
rapidly might appear crooked depending on the recording conditions.
The screen picture is bright, and the subject does not appear on the screen.
• Set [BACK LIGHT] to [OFF].
The screen picture is dark, and the subject does not appear on the screen.
Horizontal stripes appear on the image.
• This occurs when recording pictures under a fluorescent lamp, sodium lamp, or mercury
Black bands appear when you record a TV screen or computer screen.
Fine patterns flicker, diagonal lines look jagged.
Continued ,
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
Playback
If you are playing back pictures stored on a “Memory Stick Duo,” see also the Cassette tapes/
You cannot play back tape.
• Slide the POWER switch to VCR.
Image data stored on a “Memory Stick Duo” cannot be played back correctly.
• Image data cannot be played back if you have modified file names or folders, or have edited
• Pictures recorded on other devices may not be played back correctly. This is not a
malfunction.
The data file name is displayed incorrectly, or flashing.
• The file is damaged.
• Only the file name is displayed if the folder structure does not meet the universal standard.
Horizontal lines appear on the picture. The displayed pictures are not clear or
do not appear.
You cannot hear the sound recorded with 4CH microphone recording on
another camcorder.
• You cannot reproduce the sound recorded in CH3 and CH4 on your camcorder for the HDV
format 4-ch recording.
No sound or only a low sound is heard.
• Pictures recorded using [SMTH SLW REC] do not have sounds.
The picture or sound breaks off.
• The tape was recorded in both of the HDV and DV formats. This is not a malfunction.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
The movies freeze for a while, or the sound breaks off.
• Use the Sony mini DV cassette tape.
“---” is displayed on the screen.
• The tape you are playing back was recorded without setting the date and time.
• A blank section on the tape is being played back.
• The data code on a tape with a scratch or noise cannot be read.
• The tape you are playing was recorded with the gain set to -6dB.
Noises appear and
or
is displayed on the screen.
• The tape was recorded in a TV color system other than that of your camcorder (PAL). This is
not a malfunction.
Date Search does not work correctly.
• Be sure to record more than 2 minutes after the date changed. If one day’s recording is too
short, your camcorder may not accurately find the point where the recording date changes.
• There is a blank section between recorded sections of the tape. This is not a malfunction.
No picture appears during End search or Rec review.
• The tape was recorded in both HDV and DV formats. This is not a malfunction.
New sound added to a recorded tape on another camcorder is not heard.
• Change the [DV AUDIO MIX] setting from [ST1] (original sound) to [MIX] or [ST2].
,
,
or
appears on the LCD screen.
•
•
appears when you play back a tape recorded on another device using a 4ch
microphone (4CH MIC REC). This camcorder does not comply with the 4ch microphone
recording standard.
,
or
may appears when you play back a tape recorded on another device in
progressive recording mode. Your camcorder does not have progressive recording capability.
Connecting to TV
You cannot view the picture on the TV connected with the i.LINK cable.
• You cannot view the picture in the HD (high definition) quality on the TV if an i.LINK jack
manuals supplied with your TV.
• Down convert the pictures recorded in HDV format and play back in DV format (SD image
Continued ,
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
You cannot hear the sound on the TV connected with the S VIDEO plug
(S VIDEO channel) or component video plugs.
• If you are using an S VIDEO plug or component video plugs, make sure the red and white
You cannot view the picture or hear the sound on the TV connected with the
component A/V cable.
• When you are using the component A/V cable, make sure the red and white plugs of the
You cannot view the picture or hear the sound on the TV connected with the
HDMI cable.
• Pictures in the HDV format are not output from the HDMI OUT jack, if copyright protection
signals are recorded in the pictures.
• This occurs if you record on a tape in both HDV and DV formats. Disconnect and connect the
HDMI cable, or slide the POWER switch to turn on your camcorder again.
The picture appears distorted on the 4:3 TV.
• This happens when viewing a picture recorded in the 16:9 (wide) mode on a 4:3 TV. Set [TV
Black zone appears at top and bottom of a 4:3 TV screen.
• This happens when viewing a picture recorded in the 16:9 (wide) mode on a 4:3 TV. This is
not a malfunction.
Dubbing/Editing/Connecting to other devices
Pictures from connected devices cannot be zoomed.
Time code and other information appear on the display of the connected
device.
• Set [DISP OUTPUT] to [LCD PANEL] while connected with an A/V connecting cable
You cannot dub correctly using the A/V connecting cable.
• The A/V connecting cable is not connected properly.
Make sure that the A/V connecting cable is connected to the input jack of the other device for
dubbing a picture from your camcorder.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
When connected using an i.LINK cable, no picture appears on the monitor
screen during dubbing.
You cannot add sound to the recorded tape.
• You cannot add sound to the recorded tape on this unit.
You cannot dub correctly using the HDMI cable.
• You cannot dub pictures using the HDMI cable.
Still pictures cannot be dubbed from a tape to a “Memory Stick Duo.”
• You cannot capture pictures at all or good-quality pictures from the tape that has been used
repeatedly for recording.
When you copy a movie shot in wide (16:9) format using an i.LINK cable, the
screen stretches vertically.
• You cannot output the aspect ratio setting using an i.LINK cable. Set the aspect ratio of the
TV instead.
• Connect using an A/V connecting cable instead.
Continued ,
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
Connecting to a computer
The computer does not recognize your camcorder.
• Disconnect the cable from the computer and camcorder, then connect it again securely.
• Disconnect the cable from the computer, restart the computer, then connect the computer to
your camcorder correctly.
You cannot view or copy a movie recorded on a tape to a computer.
• Disconnect the cable from the computer, then connect it again.
• You need the editing software (optional) to copy a movie recorded on a tape to your computer
Your computer freezes.
• Disconnect the cable from your computer and camcorder. Reboot your computer, and
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning indicators and messages
E:61:ss / E:62:ss
Self-diagnosis display/Warning
indicators
• Contact your Sony dealer or local
authorized Sony service facility. Inform
them of the 5-digit code, which starts
from “E.”
When an error occurs, a warning indicator
appears on the LCD screen or in the
viewfinder.
Some symptoms you can fix by yourself. If
the problem persists even after you have
tried a couple of times, contact your Sony
dealer or local authorized Sony service
facility.
101-1001(Warning indicator
pertaining to files)
• The file is damaged.
E (Battery level warning)
C: (or E:) ss:ss (Self-diagnosis
display)
• The battery pack is nearly used up.
• Depending on the operating,
environment, or battery conditions, E
may flash, even if there are
approximately 5 to 10 minutes
remaining.
C:04:ss
• The battery pack is not an
“InfoLITHIUM” battery pack. Use an
• Connect the DC plug of the AC
Adaptor to the DC IN jack of your
% (Moisture condensation warning)
• Eject the cassette, remove the power
source, and then leave it for about 1
C:06:ss
• The battery pack is too hot. Replace the
battery pack, or remove it and put it in a
cool place.
(Warning indicator pertaining to
“Memory Stick Duo”)
C:21:ss
• Moisture condensation has occurred.
Remove the cassette and leave your
camcorder for at least 1 hour, then re-
• A “Memory Stick Duo” is not inserted
(Warning indicators pertaining to
“Memory Stick Duo” formatting)
C:22:ss
• Clean the head using a cleaning
• The “Memory Stick Duo” is damaged.
• The “Memory Stick Duo” is not
C:31:ss / C:32:ss
• Symptoms that are not described above
have occurred. Remove and insert the
cassette, then operate your camcorder
again. Do not perform this procedure if
moisture condensation has occurred
(Warning indicators pertaining to
unsupported “Memory Stick Duo”)
• A “Memory Stick Duo” that cannot be
used in your camcorder is inserted
• Remove the power source. Reconnect it
and operate your camcorder again.
• Change the cassette. Press the RESET
camcorder again.
Continued ,
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning indicators and messages (Continued)
Description of warning messages
(Warning indicator
pertaining to battery pack
temperature)
If messages appear on the screen, follow the
instructions.
• The battery pack is too hot. Replace the
battery pack, or remove it and put it in a
cool place.
x Battery/Power
Cannot use this battery in the
(Warning indicator pertaining to
battery pack temperature)
x Moisture condensation
• The battery pack is too cold. Replace
the battery pack, or remove it and put it
in a warm place.
%Z Moisture condensation. Eject
Q (Warning indicators pertaining to
the tape)
% Moisture condensation. Turn off
Slow flashing:
• There is less than 5 minutes remaining
on the tape.
x Cassette/Tape
• No cassette is inserted.
• The write-protect tab on the cassette is
• Check if the cassette is damaged.
Fast flashing:
• The tape has run out.
QZ The tape is locked - check the
Z (Eject cassette warning)
x “Memory Stick Duo”
Slow flashing:
• The write-protect tab on the cassette is
Reinsert the Memory Stick.
Fast flashing:
• Moisture condensation has occurred
• The self-diagnosis display code is
• Reinsert the “Memory Stick Duo” a
few times. If even then the indicator
flashes, the “Memory Stick Duo” might
be damaged. Try with another
“Memory Stick Duo.”
- (Warning indicator pertaining
to the write-protect of the “Memory
Stick Duo”)
This Memory Stick is not
formatted correctly.
• Check the format, then format the
“Memory Stick Duo” as necessary
• The write-protect tab on the “Memory
z Tips
• You will hear a beep when certain messages
appear on the screen.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory Stick folders are full.
• You cannot create folders exceeding
999MSDCF. You cannot delete created
folders using your camcorder.
• You will have to format the “Memory
your computer.
Cannot record still images on
Memory Stick.
• You cannot record still images in the
following cases:
– When the shutter speed is slower than
1/50
– While using [FADER]
– While using [SMTH SLW REC]
– While checking or executing shot
transition
x Others
No output image in “VCR HDV/DV.”
Change format.
• Stop playback or signal input, or
change [VCR HDV/DV] setting
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Using your camcorder abroad
Power supply
Viewing HDV format pictures recorded
in HDV format
You need an HDV1080i compatible TV (or
monitor) with a component jack and
AUDIO/VIDEO input jack. You also need
a component A/V cable (supplied) or an
HDMI cable (optional).
You can use your camcorder in any
country/region using the AC Adaptor
supplied with your camcorder within the
AC 100 V to 240 V, 50/60 Hz range.
On TV color systems
Your camcorder is PAL system, so its
picture can only be viewed on a PAL
system TV with an AUDIO/VIDEO input
jack.
Viewing DV format pictures recorded
in DV format
You need a TV with the AUDIO/VIDEO
input jack. A connecting cable is also
needed.
System
Used in
PAL
Australia, Austria, Belgium,
China, Czech Republic,
Simple setting of the clock by time
difference
When you are abroad, you can easily adjust
the clock to the local time by setting the
time difference. Select [WORLD TIME],
Denmark, Finland, Germany,
Holland, Hong Kong, Hungary,
Italy, Kuwait, Malaysia,
New Zealand, Norway, Poland,
Portugal, Singapore,
Slovak Republic, Spain,
Sweden, Switzerland, Thailand,
United Kingdom, etc.
PAL - M Brazil
PAL - N Argentina, Paraguay, Uruguay.
SECAM Bulgaria, France, Guiana, Iran,
Iraq, Monaco, Russia, Ukraine,
etc.
NTSC
Bahama Islands, Bolivia,
Canada, Central America, Chile,
Colombia, Ecuador, Guyana,
Jamaica, Japan, Korea, Mexico,
Peru, Surinam, Taiwan,
the Philippines, the U.S.A.,
Venezuela, etc.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and precautions
Copyright signal
HDV format and recording/
playback
x When you play back
If the cassette you play back on your
camcorder contains copyright signals, you
cannot copy it to a tape in another video
camera connected to your camcorder.
Your camcorder is capable of recording in
both HDV and DV formats.
You can use mini DV format cassettes only.
Use a cassette with the
Your camcorder is not compatible with the
Cassette Memory function.
mark.
x When you record
You cannot record software on your
camcorder that contains copyright control
signals for copyright protection of software.
[Cannot record due to copyright
What is the HDV format?
The HDV format is a video format
developed to record and play back digital
high definition (HD) video signals on a DV
cassette.
Your camcorder adopts the Interlace mode
with 1,080 effective scan lines of screen
ruling (1080i, number of pixels 1,440 ×
1,080 dots).
protection.] appears on the LCD screen, or
on the viewfinder if you try to record such
software. Your camcorder does not record
copyright control signals on the tape when
it records.
Notes on use
The video bit rate for recording is about 25
Mbps.
i.LINK is adopted for the digital interface,
enabling a digital connection with an HDV
compatible TV or computer.
• HDV signals are compressed in MPEG2 format,
which is adopted in BS (broadcast satellite)
digital, terrestrial digital HDTV broadcastings,
in Blu-ray Disc recorders, etc.
x When not using your camcorder for a
long time
Remove the cassette and store it.
x To prevent accidental erasure
Slide the write-protect tab on the cassette to
set it to SAVE.
Playback
Your camcorder can play back pictures in
both the DV format and HDV1080i
specification.
Your camcorder can play back pictures
recorded in the HDV 720/30p format, but
cannot output it from the HDV/DV
interface (i.LINK).
REC: The cassette can be
recorded.
SAVE: The cassette cannot be
recorded (write-protected).
REC
SAVE
To prevent a blank section from being
created on the tape
Go to the end of the recorded section using
the next recording when you have played
back the tape.
Continued ,
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and precautions (Continued)
x When labeling the cassette
Recording
/Playback
Types of “Memory Stick”
Be sure to place the label only on the
locations shown in the following
illustration so as not to cause a malfunction
of your camcorder.
Memory Stick Duo
(with MagicGate)
a
Memory Stick PRO Duo
a
a
Do not put a label
along this border.
Memory Stick PRO-HG Duo
• This product does not support high speed data
transfer via a parallel interface.
• This product cannot record or play data that uses
“MagicGate” technology. “MagicGate” is a
copyright protection technology that records and
transfers the contents in an encrypted format.
Labeling position
• This product is compatible with “Memory Stick
Micro” (“M2”). “M2” is the abbreviation for the
“Memory Stick Micro.”
• Still image format: Your camcorder compresses
and records image data in the JPEG (Joint
Photographic Experts Group) format. The file
extension is “.JPG.”
• A “Memory Stick Duo” formatted by a
computer (Windows OS/Mac OS) does not have
guaranteed compatibility with your camcorder.
• Data read/write speed may vary depending on
the combination of the “Memory Stick Duo”
and “Memory Stick Duo” compliant product
you use.
• You can prevent accidental erasure of images
when you slide the write-protect tab on the
“Memory Stick Duo” with a small tapered
object, to the write-protect position.
x After using the cassette
Rewind the tape to the beginning to avoid
distortion of the picture or the sound. The
cassette should then be put in its case, and
stored in an upright position.
x When cleaning the gold-plated
connector
Generally, clean the gold-plated connector
on a cassette with a cotton-wool swab after
every 10 times it has been ejected.
If the gold-plated connector on the cassette
is dirty or dusty, the remaining tape
indicator may not show correctly.
• Damaged or lost image data will not be
compensated for, and may occur in the
following cases:
Gold-plated connector
– If you eject the “Memory Stick Duo,” turn the
power off on your camcorder, or remove the
battery pack for replacement while your
camcorder is reading or writing image files on
the “Memory Stick Duo” (while the access
lamp is lit or flashing).
About the “Memory Stick”
A “Memory Stick” is a compact, portable
IC recording medium with a large data
capacity.
– If you use the “Memory Stick Duo” near
magnets or magnetic fields.
You can use the following types of
“Memory Stick” listed below on the
camcorder. However, we do not guarantee
the operation of all types of “Memory
Stick” on your camcorder. (See the list
below for more details.)
• It is recommended to make a back-up of
important data on the hard disk of a computer.
• Be careful not to apply excessive force when
writing on a memo area on a “Memory Stick
Duo.”
• Do not attach a label or the like on a “Memory
Stick Duo” or a “Memory Stick Duo” adaptor.
• When you carry or store a “Memory Stick Duo,”
put it in its case.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not touch, or allow metallic objects to come
into contact with the terminals.
might not be able to remove it from the
camcorder.
• Do not bend, drop or apply strong force to the
“Memory Stick Duo.”
• Do not disassemble or modify the “Memory
Stick Duo.”
• Do not leave the “Memory Stick Micro” within
the reach of small children. They might
accidentally swallow it.
On image data compatibility
• Do not let the “Memory Stick Duo” get wet.
• Be careful to keep “Memory Stick Duo” media
out of the reach of small children. There is
danger that a child might swallow it.
• Do not insert anything other than a “Memory
Stick Duo” into the “Memory Stick Duo” slot.
Doing so may cause a malfunction.
• Image data files recorded on a “Memory Stick
Duo” by your camcorder conform to the
“Design rule for Camera File system” universal
standard established by the JEITA (Japan
Electronics and Information Technology
Industries Association).
• On your camcorder, you cannot play back still
images recorded on other devices (DCR-
TRV900E or DSC-D700/D770) that do not
conform to the universal standard. (These
models are not sold in some regions.)
• Do not use or keep the “Memory Stick Duo” in
the following locations:
– Places subject to extremely high temperature,
such as a car parked outside in the summer.
– Places under direct sunlight.
• If you cannot use a “Memory Stick Duo” that
has been used with another device, format it
formatting erases all information on the
“Memory Stick Duo.”
• You may not be able to play back images with
your camcorder:
– When playing back image data modified on
your computer.
– Places with extremely high humidity or
subject to corrosive gases.
x On the “Memory Stick Duo” adaptor
• When using a “Memory Stick Duo” with a
“Memory Stick” compliant device, make sure to
insert the “Memory Stick Duo” into a “Memory
Stick Duo” adaptor.
• When inserting a “Memory Stick Duo” into a
“Memory Stick Duo” adaptor, make sure the
“Memory Stick Duo” is inserted facing in the
correct direction, then insert it all the way in.
Note that improper use may cause a
malfunction. Also, if you force the “Memory
Stick Duo” into the “Memory Stick Duo”
adaptor in the wrong direction, it may be
damaged.
– When playing back image data recorded with
other devices.
About the “InfoLITHIUM” battery
pack
This unit is compatible with an
“InfoLITHIUM” battery pack (L series).
Your camcorder operates only with an
“InfoLITHIUM” battery pack.
• Do not insert a “Memory Stick Duo” adaptor
without a “Memory Stick Duo” attached. Doing
so may result in malfunctions of the unit.
“InfoLITHIUM” L series battery packs
x On a “Memory Stick PRO Duo”
• The maximum memory capacity of a “Memory
Stick PRO Duo” that can be used on your
camcorder is 16 GB.
have the
mark.
What is an “InfoLITHIUM” battery
pack?
An “InfoLITHIUM” battery pack is a
lithium-ion battery pack that has functions
for communicating information related to
operating conditions between your
camcorder and an AC Adaptor/ Charger.
The “InfoLITHIUM” battery pack
Notes on using “Memory Stick Micro”
• To use a “Memory Stick Micro” with the
camcorder, you need a Duo-sized M2 Adaptor.
Insert the “Memory Stick Micro” into the Duo-
sized M2 Adaptor, then insert the adaptor into
the “Memory Stick Duo” slot. If you insert a
“Memory Stick Micro” into the camcorder
without using a Duo-sized M2 Adaptor, you
calculates the power consumption
Continued ,
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and precautions (Continued)
according to the operating conditions of
your camcorder, and displays the remaining
battery time in minutes.
About the remaining battery time
indicator
• When the power goes off even though the
remaining battery time indicator indicates that
the battery pack has enough power to operate,
charge the battery pack fully again. Remaining
battery time will be indicated correctly. Note,
however, that the battery indication will not be
restored if it is used in high temperatures for a
long time, or if left in a fully charged state, or
when the battery pack is frequently used. Use
the remaining battery time indication as a rough
guide only.
With an AC Adaptor/Charger, the
remaining battery time and charging time
appear.
To charge the battery pack
• Be sure to charge the battery pack before you
start using your camcorder.
• We recommend charging the battery pack in an
ambient temperature of between 10 °C to 30 °C
(50 °F to 86 °F) until the CHG lamp turns off. If
you charge the battery pack outside of this
temperature range, you may not be able to
charge it efficiently.
• After charging is complete, disconnect the cable
from the DC IN jack on your camcorder or
remove the battery pack.
• The E mark that indicates low battery flashes
even if there are still 5 to 10 minutes of battery
time remaining, depending on the operating
conditions or ambient temperature.
About storage of the battery pack
• If the battery pack is not used for a long time,
fully charge the battery pack and use it up on
your camcorder once a year to maintain proper
function. To store the battery pack, remove it
from your camcorder and put it in a dry, cool
place.
• To discharge the battery pack on your
camcorder completely, leave your camcorder in
tape recording standby until the power goes off
To use the battery pack effectively
• Battery pack performance decreases when the
surrounding temperature is 10 °C (50 °F) or
below, and the length of time you can use the
battery pack becomes shorter. In that case, do
one of the following to use the battery pack for a
longer time.
– Put the battery pack in a pocket to warm it up,
and insert it in your camcorder right before
you start taking shots.
– Use a large capacity battery pack: NP-F770/
F970 (optional).
• Frequent use of the LCD screen or a frequent
playback, fast forward or rewind operation
wears out the battery pack faster.
About battery life
• Battery capacity decreases over time and
through repeated use. If decreased usage time
between charges becomes significant, it is
probably time to replace it with a new one.
• Each battery’s life is governed by storage,
operating and environmental conditions.
We recommend using a large capacity battery
pack: NP-F770/F970.
• Be sure to set the POWER switch to OFF
(CHG) when not recording or playing back on
your camcorder. The battery pack is also
consumed when your camcorder is in recording
standby or playback pause.
• Have spare battery packs ready for two or three
times the expected recording time, and make
trial recordings before making the actual
recording.
About i.LINK
The HDV/DV (i.LINK) jack on your
camcorder is an i.LINK-compliant 4-pin
jack. This section describes the i.LINK
standard and its features.
What is i.LINK?
i.LINK is a digital serial interface for
transferring digital video, digital audio, and
other data to other i.LINK-compatible
• Do not expose the battery pack to water. The
battery pack is not water resistant.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
devices. You can also control other devices
using the i.LINK.
received in one second. For example, a
baud rate of 100 Mbps means that 100
megabits of data can be sent in one second.
i.LINK-compatible devices can be
connected using an i.LINK cable. Possible
applications are operations and data
transactions with various digital AV
devices.
When two or more i.LINK-compatible
devices are daisy-chained with the unit,
operation becomes possible from any
device in the chain. Note that operation
method may vary, or data transactions may
not be possible, depending on specifications
and characteristics of the connected
devices.
To use i.LINK functions on this unit
For details on how to dub when this unit is
connected to other video devices having an
This unit can also be connected to other
i.LINK-compatible devices made by Sony
(for example, a VAIO series personal
computer) as well as to video devices.
Some i.LINK compatible video devices,
such as Digital Televisions, DVD,
MICROMV or HDV recorders/players are
not compatible with this unit. Before
connecting to other devices, be sure to
confirm whether the device is compatible
with an HDV/DV device or not. For details
on precautions and compatible application
software, refer also to the operating
b Notes
• Normally, only one device can be connected to
this unit with an i.LINK cable. When
connecting this unit to an HDV/DV compatible
device having two or more HDV/DV
interfaces, refer to the operating instructions of
the device to be connected.
instructions for the device to be connected.
• i.LINK is a more familiar term for the IEEE
1394 data transport bus proposed by Sony, and
is a trademark approved by many corporations.
• IEEE 1394 is an international standard
standardized by the Institute of Electrical and
Electronics Engineers.
b Notes
• When connecting a device with an i.LINK
terminal to your camcorder via an i.LINK cable,
switch off the device and unplug it from the
power socket before plugging in or unplugging
the i.LINK cable.
About the i.LINK Baud rate
i.LINK’s maximum baud rate varies
according to the device. There are 3 types.
About the required i.LINK cable
• Use the Sony i.LINK 4-pin-to-4-pin cable
(during HDV/DV dubbing).
S100 (approx. 100Mbps*)
S200 (approx. 200Mbps)
S400 (approx. 400Mbps)
About x.v.Color
• x.v.Color is a more familiar term for the
xvYCC standard proposed by Sony, and is
a trademark of Sony.
• xvYCC is an international standard for
color space in video. This standard can
express a wider color range than the
currently used broadcast standard.
The baud rate is listed under
“Specifications” in the operating
instructions of each piece of equipment. It
is also indicated near the i.LINK interface
on some devices.
The baud rate may differ from the indicated
value when the unit is connected to a device
with a different maximum baud rate.
* What is Mbps?
Mbps stands for “megabits per second,” or
the amount of data that can be sent or
Continued ,
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and precautions (Continued)
• Do not damage the power cord (mains lead)
such as by placing anything heavy on it.
• Keep metal contacts clean.
• Keep the Remote Commander and button-type
battery out of children’s reach. If the battery is
accidentally swallowed, consult a doctor
immediately.
About handling of your
camcorder
On use and care
• Do not use or store the camcorder and
accessories in the following locations.
• If the battery electrolytic liquid has leaked,
– Anywhere extremely hot or cold. Never leave
them exposed to temperatures above 60 °C
(140 °F), such as under direct sunlight, near
heaters or in a car parked in the sun. They
may malfunction or become deformed.
– consult your local authorized Sony service
facility.
– wash off any liquid that may have contacted
your skin.
– if any liquid gets in your eyes, wash with
plenty of water and consult a doctor.
– Near strong magnetic fields or mechanical
vibration. The camcorder may malfunction.
– Near strong radio waves or radiation. The
camcorder may not be able to record properly.
– Near AM receivers and video equipment.
Noise may occur.
x When not using your camcorder for a
long time
• Periodically turn on the camcorder and play a
cassette for about 3 minutes.
– On a sandy beach or anywhere dusty. If sand
or dust gets in your camcorder, it may
malfunction. Sometimes this malfunction
cannot be repaired.
– Near windows or outdoors, where the LCD
screen, the viewfinder, or the lens may be
exposed to direct sunlight. This damages the
inside of the viewfinder or the LCD screen.
– Anywhere very humid.
• Operate your camcorder on DC 7.2 V (battery
pack) or DC 8.4 V (AC Adaptor).
• For DC or AC operation, use the accessories
recommended in these operating instructions.
• Do not let your camcorder get wet, for example,
from rain or sea water. If your camcorder gets
wet, it may malfunction. Sometimes this
malfunction cannot be repaired.
• If any solid object or liquid gets inside the
casing, unplug your camcorder and have it
checked by a Sony dealer before operating it
any further.
• Avoid rough handling, disassembling,
modifying, physical shock, or impact such as
hammering, dropping or stepping on the
product. Be particularly careful of the lens.
• Use up the battery pack completely before
storing it.
Moisture condensation
If your camcorder is brought directly from a
cold place to a warm place, moisture may
condense inside your camcorder, on the
surface of the tape, or on the lens. In this
state, the tape may stick to the head drum
and be damaged or your camcorder may not
operate correctly. If there is moisture inside
your camcorder, [Moisture condensation.
Eject the cassette] or [Moisture
condensation. Turn off for 1H.] appears.
The indicator will not appear when the
moisture condenses on the lens.
x If moisture condensation has occurred
None of the functions except cassette
ejection will work. Eject the cassette, turn
off your camcorder, and leave it for about
one hour with the cassette lid open. Your
camcorder can be used again when both of
the following conditions are met:
• Do not use a deformed or damaged battery pack.
• Keep the POWER switch setting to OFF (CHG)
when you are not using your camcorder.
• The warning message does not appear when the
power is turned on.
• Neither % nor Z flashes when a cassette is
inserted and the video operation buttons are
pressed.
If moisture starts to condense, your
camcorder sometimes cannot detect
• Do not wrap your camcorder with a towel, for
example, and operate it. Doing so might cause
heat to build up inside.
• When disconnecting the power cord (mains
lead), pull it by the plug and not the cord.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
• If the following problem occurs, clean the video
heads for 10 seconds with the Sony cleaning
cassette (optional).
– Playback pictures do not move.
– Playback pictures do not appear.
– The sound breaks off.
condensation. If this happens, the cassette is
sometimes not ejected for 10 seconds after
the cassette lid is opened. This is not a
malfunction. Do not close the cassette lid
until the cassette is ejected.
x Note on moisture condensation
Moisture may condense when you bring
your camcorder from a cold place into a
warm place (or vice versa) or when you use
your camcorder in a humid place as shown
below.
– [x
Dirty video head. Use a cleaning
cassette.] appears on the screen during
recording.
– The following phenomenon occurs in HDV
format.
• When you bring your camcorder from a ski
slope into a place warmed up by a heating
device.
• When you bring your camcorder from an air
conditioned car or room into a hot place outside.
• When you use your camcorder after a squall or a
shower.
• When you use your camcorder in a hot and
humid place.
The playback The playback screen
screen pauses. goes blank.
(Solid blue screen)
– The following phenomenon occurs in DV
format.
x How to avoid moisture condensation
When you bring your camcorder from a
cold place into a warm place, put your
camcorder in a plastic bag and seal it
tightly. Remove the bag when the air
temperature inside the plastic bag has
reached the surrounding temperature (after
about one hour).
Block-noise
appears.
The playback screen goes blank.
(Solid blue screen)
Video head
If you play back a tape recorded in HDV
format, the image and sound may freeze for
a while (about 0.5 seconds).
This occurs if the HDV signals cannot be
recorded or played back correctly because
of dirt on the tape or video head. Depending
on the cassette, this fairly infrequently
occurs even if the cassette is brand new or
is not used a lot.
If this freezing point is created while
playing back, you can solve this problem
and see the pictures by rewinding after
slightly forwarding. Such a freezing point
cannot be recovered if it was created while
recording.
• The video heads will be worn after long use. If
you cannot obtain a clear image even after using
a cleaning cassette (optional), the video heads
may be worn out. Please contact your Sony
dealer or local authorized Sony service facility
to have the video heads replaced.
LCD screen
• Do not exert excessive pressure on the LCD
screen, as it may cause damage.
• If your camcorder is used in a cold place, a
residual image may appear on the LCD screen.
This is not a malfunction.
• While using your camcorder, the back of the
LCD screen may heat up. This is not a
malfunction.
To prevent such a problem, use the Sony
mini DV cassette.
Continued ,
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and precautions (Continued)
x To clean the LCD screen
fully discharged in about 3 months if you
If fingerprints or dust make the LCD screen
dirty, it is recommended you use a soft
cloth to clean it. When you use the LCD
Cleaning Kit (optional), do not apply the
cleaning liquid directly to the LCD screen.
Use cleaning paper moistened with the
liquid.
do not use your camcorder at all without the
AC Adaptor connected or the battery pack
attached. Use your camcorder after
charging the pre-installed rechargeable
battery.
However, even if the pre-installed
rechargeable battery is not charged, the
camcorder operation will not be affected as
long as you are not recording the date.
On handling the casing
• If the casing is soiled, clean the camcorder body
with a soft cloth lightly moistened with water,
and then wipe the casing with a dry soft cloth.
• Avoid the following to avoid damage to the
finish.
– Using chemicals such as thinner, benzine,
alcohol, chemical cloths, repellent, insecticide
and sunscreen.
x Procedures
Connect your camcorder to a wall outlet
(wall socket) using the supplied AC
Adaptor, and leave it with the POWER
switch set to OFF (CHG) for more than 24
hours.
– Handling with above substances on your
hands.
– Leaving the casing in contact with rubber or
vinyl objects for a long period of time.
About care and storage of the lens
• Wipe the surface of the lens clean with a soft
cloth in the following instances:
– When there are fingerprints on the lens
surface.
– In hot or humid locations
– When the lens is exposed to salty air such as
at the seaside.
• Store in a well-ventilated location subject to
little dirt or dust.
• To prevent mold, periodically clean the lens as
described above. It is recommended that you
operate your camcorder about once a month to
keep it in optimum state for a long time.
On charging the pre-installed
rechargeable battery
Your camcorder has a pre-installed
rechargeable battery to retain the date, time,
and other settings even when the POWER
switch is set to OFF (CHG). The pre-
installed rechargeable battery is always
charged while your camcorder is connected
to the wall outlet (wall socket) via the AC
Adaptor or while the battery pack is
inserted. The rechargeable battery will be
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing dust from inside the
viewfinder
1
Remove the eye piece of the
viewfinder.
Slide down the viewfinder release lever
and hold it at the position (1), then lift
the eye piece of the viewfinder as
indicated with the arrow in the
illustration (2).
2
1
2
3
Remove dust inside the eye piece
and viewfinder with a blower.
Attach the viewfinder following
the reverse procedure of step 1.
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Recording Pixels (HDV/DV16:9 still
recording):
System
Video recording system (HDV)
2 rotary heads, Helical scanning system
Video recording system (DV)
2 rotary heads, Helical scanning system
Still image recording system
Exif Ver. 2.2*
Audio recording system (HDV)
Rotary heads, MPEG-1 Audio Layer -2,
Quantization: 16 bits
Fs48kHz (stereo)
transfer rate: 384 kbps
Audio recording system (DV)
Rotary heads, PCM system
Quantization: 12 bits
Max. 1.20 Mega (1 440 × 810) pixels**
Gross: Approx. 1 120 000 pixels
Effective (movie, 16:9):
Approx. 1 037 000 pixels
Effective (movie, 4:3):
Approx. 778 000 pixels
Effective (still, 16:9):
Approx. 1 037 000 pixels
Effective (still, 4:3):
Approx. 778 000 pixels
Lens
G Lens
20 × (Optical), Approx. 30 × (Digital,
when [D.EXTENDER] is set to [ON])
Fs32kHz (stereo1, stereo2)
Quantization: 16 bits
Fs48kHz (stereo)
Focal length
f= 4.1 - 82.0 mm (3/16 - 3 1/4 in.)
When converted to a 35 mm still
camera
29.5 - 590 mm (1 3/16 - 23 1/4 in.)
(16:9),
Video signal
PAL color, CCIR standards
1080/50i specification
Usable cassette
Mini DV cassette with the
printed
Tape speed (HDV)
36.1 - 722 mm (1 7/16 - 28 1/2 in.) (4:3)
F1.6 - 3.4
mark
Filter diameter: 72 mm (2 7/8 in.)
Color temperature
Approx. 18.831 mm/s
Tape speed (DV)
Automatically
(one push) A/B
[INDOOR] (3 200 K)
SP: Approx. 18.831 mm/s
LP: Approx. 12.568 mm/s
Recording/playback time (HDV)
60 min (using a DVM60 cassette)
Recording/playback time (DV)
SP: 60 min (using a DVM60 cassette)
LP: 90 min (using a DVM60 cassette)
Fast forward/rewind time
[OUTDOOR] (5 800 K)
Minimum illumination
1.5 lx (lux) (Fixed Shutter Speed 1/25,
auto gain, auto iris) (F 1.6)
* “Exif” is a file format for still images,
established by the JEITA (Japan
Electronicsand InformationTechnology
Industries Association). Files in this
format can have additional information
such as your camcorder’s setting
Approx. 2 min 40 s (using a DVM60
cassette and rechargeable battery pack)
Approx. 1 min 45 s (using a DVM60
cassette and AC Adaptor)
information at the time of recording.
Viewfinder
Electric viewfinder (color)
Image device
6.0 mm (1/3 type) 3CMOS sensor
114
Download from Www.Somanuals.com. All Manuals Search And Download.
**The unique pixel array of Sony’s
ClearVid CMOS sensor and image
processing system (Enhanced Imaging
Processor) allows for still image
resolution equivalent to the sizes
described.
General
Power requirements
DC 7.2 V (battery pack)
DC 8.4 V (AC Adaptor)
Average power consumption
During camera recording using the
viewfinder with normal brightness:
HDV recording 6.2 W
Output connectors
A/V Remote Connector
10-pin connector
DV recording 6.0 W
During camera recording using the
LCD with normal brightness:
HDV recording 6.4 W
When A/V connecting cable is
connected
Video signal: 1 Vp-p, 75 Ω(ohms)
Luminance signal: 1 Vp-p, 75 Ω(ohms)
Chrominance signal: 0.3 Vp-p (burst
signal), 75 Ω(ohms)
DV recording 6.2 W
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
When component A/V cable is
connected
Y: 1 Vp-p, 75Ω(ohms), PB/PR, CB/CR:
+/- 350 mV, 75 Ω(ohms)
Audio signal: 327 mV (at load
impedance 47 kΩ(kilohms)), Output
impedance with less than 2.2 kΩ
(kilohms)
169 × 178 × 349 mm
(6 3/4 × 7 × 13 7/8 in.) (w/h/d)
including the projecting parts except for
the grip belt
169 × 178 × 349 mm
(6 3/4 × 7 × 13 7/8 in.) (w/h/d)
including the projecting parts with the
battery pack (NP-F570)
HDMI OUT jack
TypeA (19-pin)
i (headphones) jack
Mass (approx.)
Stereo-minijack (Ø 3.5 mm)
2.1 kg (4 lb 9 oz) including the lens
hood with lens cover
2.3 kg (4 lb 15 oz) including the lens
hood with lens cover, battery pack (NP-
F570), cassette (DVM60) and large
eyecup
Input/Output connectors
LANC
jack
Stereo mini-minijack (Ø 2.5 mm)
HDV/DV jack
i.LINK interface (IEEE 1394, 4-pin
connector S100)
MIC jack
Stereo-minijack (Ø 3.5 mm)
LCD screen
Picture
8.0 cm (3.2 type, aspect ratio 16:9)
Total dot number
921 600 (1 920 × 480)
Continued ,
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (Continued)
AC Adaptor AC-L100
CAUTION
Power requirements
AC 100 V - 240 V, 50 Hz/60 Hz
Current consumption
0.35 A - 0.18 A
Power consumption
18 W
If the battery pack is mishandled, the
battery pack can burst, cause a fire or even
chemical burns. Observe the following
cautions.
• Do not disassemble.
• Do not crush and do not expose the
battery pack to any shock or force such as
hammering, dropping or stepping on it.
• Do not short circuit and do not allow
metal objects to come into contact with
the battery terminals.
• Do not expose to high temperature above
60 °C (140 °F) such as in direct sunlight
or in a car parked in the sun.
• Do not incinerate or dispose of in fire.
• Do not handle damaged or leaking lithium
ion batteries.
• Be sure to charge the battery pack using a
genuine Sony battery charger or a device
that can charge the battery pack.
Output voltage
DC 8.4 V*
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Dimensions (approx.)
48 × 29 × 81 mm
(1 15/16 × 1 3/16 × 3 1/4 in.) (w/h/d)
excluding the projecting parts
Mass (approx.)
170 g (6.0 oz) excluding the power cord
(mains lead)
* See the label on the AC Adaptor for other
specifications.
• Keep the battery pack out of the reach of
small children.
• Keep the battery pack dry.
• Replace only with the same or equivalent
type recommended by Sony.
• Dispose of used battery packs promptly as
described in the instructions.
Rechargeable battery pack NP-F570
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
Specifications
15.8 Wh (2 200 mAh)
Dimensions (approx.)
38.4 × 20.6 × 70.8 mm
(1 9/16 × 13/16 × 2 7/8 in.) (w/h/d)
Mass (approx.)
Maximum charge voltage: DC 8.4 V
/Maximum charge current: 3.0 A
100 g (3.5 oz)
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Type
Lithium ion
Design and specifications are subject to change
without notice.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
On trademarks
Notes on the License
• “Handycam” and
are
registered trademarks of Sony Corporation.
• “Memory Stick,” “
Duo,” “
PRO Duo,” “
“Memory Stick PRO-HG Duo,”
“
Micro,” “MagicGate,” “
ANY USE OF THIS PRODUCT OTHER THAN
CONSUMER PERSONAL USE IN ANY
MANNER THAT COMPLIES WITH THE
MPEG-2 STANDARD FOR ENCODING
VIDEO INFORMATION FOR PACKAGED
MEDIA IS EXPRESSLY PROHIBITED
WITHOUT A LICENSE UNDER APPLICABLE
PATENTS IN THE MPEG-2 PATENT
PORTFOLIO, WHICH LICENSE IS
,” “Memory Stick
,” “Memory Stick
,”
,” “Memory Stick
,”
AVAILABLE FROM MPEG LA, L.L.C., 250
STEELE STREET, SUITE 300, DENVER,
COLORADO 80206.
“MagicGate Memory Stick” and “MagicGate
Memory Stick Duo” are trademarks of Sony
Corporation.
• “InfoLITHIUM” is a trademark of Sony
Corporation.
•
is a trademark of Sony Corporation.
• “x.v.Colour” is a trademark of Sony
Corporation.
• i.LINK and are trademarks of Sony
Corporation.
•
is a trademark.
• Microsoft, Windows, Windows Vista, and
Windows Media are trademarks or registered
trademarks of U.S. Microsoft Corporation in the
U.S. and other countries.
• Macintosh and Mac OS are registered
trademarks of Apple Inc. in the U.S. and other
countries.
• HDV and the HDV logo are trademarks of Sony
Corporation and Victor Company of Japan, Ltd.
• HDMI, HDMI logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
• Pentium is a trademark or registered trademark
of Intel Corporation.
• Adobe, and Adobe Reader. are trademarks of
Adobe Systems Incorporated.
All other product names mentioned herein may be
the trademarks or registered trademarks of their
respective companies. Furthermore, ™ and “®”
are not mentioned in each case in this manual.
117
Download from Www.Somanuals.com. All Manuals Search And Download.
QIduicek Rnetfeirefnyceing parts and controls
The numbers in ( ) are reference pages.
678 9 q;
1
2
3
4
5
qj qhqgqfqdqsqa
A
N Tripod receptacle
Make sure that the length of the tripod
screw is less than 5.5 mm (7/32 inch).
Otherwise, you cannot attach the tripod
securely, and it may damage your
camcorder.
D i (headphones) jack
When you use headphones, the speaker
on your camcorder is silent.
P BATT RELEASE (battery release)
* ASSIGN 5 button has a raised tactile dot for
your convenience in locating the button.
The recording lamp flashes if the
remaining tape or battery is low.
L LANC
The LANC
jack
control jack is used for
controlling the tape transport of video
device and peripherals connected to it.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
1 2
qs3
qd
4
qf
qa 0987
w; qlqkqjqhqg
* Each of the PLAY button, VOLUME/
MEMORY button and MEMORY/INDEX
button has a raised tactile dot. (The VOLUME/
MEMORY button has it on the + side.) Use it to
identify the location of the buttons.
E Video control buttons (STOP/REW/
K RESET button
If you press the RESET button, all
settings including the clock setting
(except the Picture profile and Camera
profile settings) return to the default.
O
Continued ,
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying parts and controls (Continued)
9
q;
qa
qs
1
2
3
4
5
6
qd
qf
qg
7
8
To attach the shoulder strap
Attach the shoulder strap (optional) to the
hooks for the shoulder strap.
C PHOTO/EXPANDED FOCUS button
I MIC jack
When a microphone is connected, it is
dominantly used for sound recording
over the internal microphone.
J Accessory shoe
The recording lamp flashes if the
remaining tape or battery is low.
M Lens
120
Download from Www.Somanuals.com. All Manuals Search And Download.
5678
9
0
1
2
3
4
qd qs qa
qkqj qhqgqf
* ASSIGN 2 button/AE SHIFT button, WHT
BAL button, IRIS/EXPOSURE button have
raised tactile dots for your convenience in
locating the buttons.
E Handle zoom switch (FIX/VAR/OFF)
G ASSIGN 2 button*/AE SHIFT button
H ASSIGN 3 button/REC REVIEW
O
Continued ,
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying parts and controls (Continued)
b Notes
• Aim the Remote Commander towards the
remote sensor to operate your camcorder.
• Point the remote sensor away from strong light
sources such as direct sunlight or overhead
lighting. Otherwise, the Remote Commander
may not function properly.
Remote Commander
Remove the insulation sheet before using
the Remote Commander.
Insulation sheet
• When you are operating with the Remote
Commander supplied with your camcorder,
your VCR may also operate. In that case, select
a commander mode other than VTR 2 for your
VCR, or cover the sensor of your VCR with
black paper.
7
To change the battery of the Remote
Commander
1While pressing on the tab, inset your
fingernail into the slit to pull out the battery
case.
8
9
1
2
3
4
2Place a new battery with the + side facing
up.
5
6
3Insert the battery case back into the Remote
Commander until it clicks.
0
Tab
The on-screen image when you press this
button will be recorded onto the “Memory
Stick Duo” as a still image.
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in
fire.
B Memory control buttons (Index, –/+,
• When the lithium battery becomes weak, the
operating distance of the Remote Commander
may shorten, or the Remote Commander may
not function properly. In this case, replace the
battery with a Sony CR2025 lithium battery.
Use of another battery may present a risk of fire
or explosion.
D . >
E Video control buttons (Rewind,
Playback, Fast-forward, Pause, Stop,
G Transmitter
122
Download from Www.Somanuals.com. All Manuals Search And Download.
Indicators for the LCD screen and viewfinder
The numbers in ( ) are reference pages.
The indicators will not be recorded on the tape during recording.
Recording movies
Recording still images
1 2 3
4 5
2
8
60min
HDV1080i
0:08:13
12
REC
60min
101
1.2M
9
min
7
6
A Recording format (
or
)
Recording mode (SP or LP) is also displayed
in the DV format.
B Remaining battery (approx.)
Data code during recording
C Recording status ([STBY] (standby) or
[REC] (recording))
The date/time during recording and the
camera setting data will be recorded
automatically. They do not appear on the
screen during recording, but you can check
them on the screen by pressing the DATA
D During recording:
Tape counter (hour: minute: second)
During playback:
Time code (hour: minute: second:
frame)
E Recording capacity of the tape (approx.)
Continued ,
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Indicators for the LCD screen and viewfinder (Continued)
Viewing movies
Viewing still images
1 2
0
4 5
2 8
qsqd
60min
HDV1080i
60min
101-0011
101
9/9
MEMORY PLAY
0:08:12:17
12
1.2M
min
qa
qf
J Tape transport indicator
K Data file name
Recording mode (SP or LP) appears when a
tape recorded in the DV format is played
back.
L Picture number/Total number of
recorded pictures in the current
playback folder
N Previous/Next folder icon
The
,
,
appear when the first or
last picture of the current folder is displayed
and when there are multiple folders on the
same “Memory Stick Duo.” You can move to
Previous/Next folder with the VOLUME/
MEMORY button.
124
Download from Www.Somanuals.com. All Manuals Search And Download.
Bottom
Indicators when you made
changes
Indicator
Meaning
Upper left
Upper right
DV AU.MODE
60min
Manual volume
+
2
9
~
Center
Bottom
Upper left
Indicator
.
Meaning
SP LP
EXPOSURE control
Automatic control
n
A
B
Upper right
Indicator
Meaning
* The settings can be made only for the pictures
in the DV format.
HDV input/
** The setting can be made only for the pictures in
the HDV format.
HDV output/
z Tips
•
Indicators may look different or appear at
different positions.
i.LINK connection
Center
Indicator
Meaning
Z
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
BATT RELEASE (battery
Numeric
Deleting camera profile settings
Battery
3-ClearVid CMOS sensor
Button-type lithium battery
C
A
DV AU. MODE
CAMERA PROF.
Cassette
DV REC MODE
Connect
E
F
AU.LVL DISP
Folder
A/V connecting cable with
D
B
126
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
REC FOLDER (Recording
G
MEMORY SET menu
L
H
N
M
“Memory Stick Duo”
O
I
P
Number of recordable
“InfoLITHIUM” battery pack
PB FOLDER
MEMORY/DELETE button
Continued ,
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Index (Continued)
S
PHOTO/EXPANDED FOCUS
U
PICTURE PROFILE button
Using your camcorder abroad
V
SKINTONE DTL (Skintone
Pre-installed rechargeable
Viewfinder lens adjustment
PUSH (lens hood release)
Q
VOLUME/MEMORY button
R
REC FOLDER (Recording
W
T
REC START/STOP button
REMOTE CTRL (Remote
X
128
Download from Www.Somanuals.com. All Manuals Search And Download.
Z
ZERO SET MEMORY
129
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|