Sony DVD VCR Combo SLV D360P User Manual

2-584-679-12 (1) US  
DVD Player/  
Video Cassette  
Recorder  
Operating Instructions  
For customers in the USA  
If you have any questions about your Sony DVD-VCR, you may call Sony Customer  
Information Services Company at 1-800-VHS-SONY (847-7669).  
For all other Sony product questions, please call Sony Customer Information Services  
Company at 1-800-222-SONY (7669).  
Or write to: Sony Customer Information Services Company 12451 Gateway  
Boulevard Ft. Myers, FL 33913  
For Customers in Canada  
If this product is not working properly, please call 1-877-602-2008 for Peace of Mind  
Warranty Replacement service.  
For other product related questions please contact our Customer Information Service  
Center at 1-877-899-7669 or write to us at: Customer Information Service 115 Gordon  
Baker Road, Toronto, Ontario, M2H 3R6  
SLV-D560P  
SLV-D360P  
© 2005 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety  
Instructions  
DVD Precautions  
On safety  
1
2
3
4
5
6
7
Read these instructions.  
Caution – The use of optical instruments with  
this product will increase eye hazard.  
To prevent fire or shock hazard, do not place  
objects filled with liquids, such as vases, on the  
apparatus.  
Should any solid object or liquid fall into the  
cabinet, unplug the player and have it checked  
by qualified personnel before operating it any  
further.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with dry cloth.  
Do not block any ventilation openings. Install  
in accordance with the manufacturer’s  
instructions.  
8
9
Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade or  
the third prong are provided for your safety. If  
the provided plug does not fit into your outlet,  
consult an electrician for replacement of the  
obsolete outlet.  
On operation  
If the player is brought directly from a cold to a  
warm location, or is placed in a very damp  
room, moisture may condense on the lenses  
inside the player. Should this occur, the player  
may not operate properly. In this case, remove  
the disc and leave the player turned on for about  
half an hour until the moisture evaporates.  
When you move the player, take out any discs.  
If you don’t, the disc may be damaged.  
On adjusting volume when playing  
DVD  
Do not turn up the volume while listening to a  
section with very low level inputs or no audio  
signals. If you do, the speakers may be damaged  
when a peak level section is played.  
10 Protect the power cord from being walked on or  
pinched particularly at plugs, convenience  
receptacles, and the point where they exit from  
the apparatus.  
11 Only use attachments/accessories specified by  
the manufacturer.  
12 Use only with the cart, stand, tripod, bracket, or  
table specified by the manufacturer, or sold with  
the apparatus. When a cart is used, use caution  
when moving the cart/apparatus combination to  
avoid injury from tip-over.  
On cleaning discs  
Do not use a commercially available cleaning disc.  
It may cause a malfunction.  
13 Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
14 Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way, such  
as power-supply cord or plug is damaged, liquid  
has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or  
has been dropped.  
IMPORTANT NOTICE  
Caution: This player is capable of holding a  
still video image or on-screen display image  
on your television screen indefinitely. If you  
leave the still video image or on-screen display  
image displayed on your TV for an extended  
period of time you risk permanent damage to  
your television screen. Projection televisions  
are especially susceptible to this.  
Important Safety Instructions 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Table of contents  
8
WARNING  
Welcome!  
General Precautions  
Important Safety Instructions  
DVD Precautions  
About this manual  
This player can play the following discs  
Notes about discs  
9 Step 1 : Unpacking  
10 Step 2 : Setting up the remote commander  
13 Step 3 : Basic hookups  
20 Step 4 : Selecting a language  
22 Step 5 : Setting the clock  
26 Step 6 : Presetting channels  
30 Step 7 : Setting up the VCR Plus+® system (SLV-D560P only)  
33 Playing discs  
62 A/V Receiver hookup  
38 Guide to the on-screen display  
41 Locking the disc tray (Child Lock)  
42 Playing a tape  
45 Recording TV programs  
48 Recording TV programs using the  
64 S-Video/Component Video hookup  
DVD Settings and  
66 Audio Setup  
68 Screen Setup  
72 Setting the display or sound track  
timer  
51 Recording TV programs using the  
Dial Timer (SLV-D560P only)  
language  
56 Recording TV programs using the  
VCR Plus+® system (SLV-D560P  
only)  
74 Parental Control (limiting playback  
by children)  
59 Checking/changing/canceling timer  
settings  
61 Locking the DVD-VCR (Child Lock)  
4
Table of contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caution  
77 Using the DVD’s menu  
79 Zooming into a scene  
80 Changing the angles  
81 Displaying the subtitle  
82 Various play mode functions  
(Program play, Shuffle play, Repeat  
play)  
For use of the VCR  
Television programs, films, video tapes and  
other materials may be copyrighted.  
Unauthorized recording of such material may  
be contrary to the provisions of the copyright  
laws. Also, use of this recorder with cable  
television transmission may require  
authorization from the cable television  
transmission and/or program owner.  
87 Changing the sound  
For use of the DVD player  
88 Virtual surround setting  
90 Playing an MP3 audio track  
95 Playing JPEG image files  
This product incorporates copyright  
protection technology that is protected by  
U.S. patents and other intellectual property  
rights. Use of this copyright protection  
technology must be authorized by  
Macrovision, and is intended for home and  
other limited viewing uses only unless  
otherwise authorized by Macrovision.  
Reverse engineering or disassembly is  
prohibited.  
99 Playing VIDEO CDs with “PBC ON/  
OFF” Functions  
101 Quick Timer Recording  
102 Recording stereo and bilingual  
programs  
103 Searching using various functions  
105 Adjusting the picture (tracking)  
106 Changing menu options  
108 Editing with another VCR  
110 General setup information  
113 Troubleshooting  
118 Glossary  
120 Specifications  
121 Index to parts and controls  
126 DVD Audio/Subtitle Language  
127 Index  
* VCR Plus+ and PlusCode are registered  
trademarks of Gemstar Development  
Corporation.  
The VCR Plus+ system is manufactured under  
license from Gemstar Development Corporation.  
Table of contents 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About this manual  
This player can play the  
following discs  
Check your model name  
The instructions in this manual are for the 2  
models: SLV-D560P and SLV-D360P. Check  
your model name by looking at the rear  
panel of your DVD-VCR.  
Format of discs  
DVD VIDEO  
SLV-D560P is the model used for illustration  
purposes. Any difference in operation is  
clearly indicated in the text, for example,  
SLV-D560P only”.  
DVD-RW/-R  
DVD+RW/+R  
This manual mainly explains operations  
using the remote, but the same operations can  
also be performed using the buttons on the  
DVD-VCR having the same or similar  
names.  
“DVD” may be used as a general term for DVD  
VIDEOs, DVD-RWs/DVD-Rs, and DVD+RWs/  
DVD+Rs.  
The meaning of the icons used in this manual is  
described below:  
VIDEO CD/  
Music CD  
Icon  
Meaning  
Functions available for DVD  
VIDEOs and DVD-RWs/DVD-  
Rs in video mode or DVD+RWs/  
DVD+Rs  
CD-RW/-R  
Functions available for DVD-  
RWs in VR (Video Recording)  
mode  
“DVD+RW,” “DVD-RW,” “DVD+R,” “DVD+R  
DL,” “DVD-R,” “DVD VIDEO,” and “CD” logos  
are trademarks.  
Functions available for VIDEO  
CDs, Super VCDs or CD-Rs/CD-  
RWs in video CD format or Super  
VCD format  
Note about CDs/DVDs  
The player can play CD-ROMs/CD-Rs/CD-RWs  
recorded in the following formats:  
– music CD format  
Functions available for music  
CDs or CD-Rs/CD-RWs in music  
CD format  
– video CD format  
Functions available for DATA  
CDs (CD-ROMs/CD-Rs/CD-  
RWs containing MP3* audio  
tracks or JPEG files)  
– MP3 audio tracks and JPEG image files of  
format conforming to ISO 9660* Level 1/  
Level 2, or its extended format, Joliet  
– KODAK Picture CD format  
Functions available for DATA  
DVDs (DVD-ROMs/DVD+RWs/  
DVD+Rs/DVD-RWs/DVD-Rs  
containing MP3* audio tracks or  
JPEG files)  
* A logical format of files and folders on CD-ROMs,  
defined by ISO (International Organization for  
Standardization).  
The player can play DVD-ROMs/DVD+RWs/  
DVD+Rs/DVD-RWs/DVD-Rs recorded in the  
following formats:  
Functions available for VHS  
VIDEOs  
– MP3 audio tracks and JPEG image files of  
format conforming to UDF (Universal Disk  
Format).  
* MP3 (MPEG 1 Audio Layer 3) is a standard format  
defined by ISO/MPEG which compresses audio  
data.  
6
About this manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
Region code  
Example of discs that the player  
cannot play  
The player cannot play the following discs:  
• CD-ROMs/CD-Rs/CD-RWs other than those  
recorded in the formats listed on the previous  
page.  
• CD-ROMs recorded in PHOTO CD format.  
• Data part of CD-Extras  
• DVD Audios  
Your player has a region code printed on the back  
of the unit and only will play DVD VIDEO discs  
(playback only) labeled with identical region codes.  
This system is used to protect copyrights.  
ALL  
DVDs labeled  
will also play on this player.  
If you try to play any other DVD VIDEO, the  
message “Playback prohibited by area limitations.”  
will appear on the TV screen. Depending on the  
DVD VIDEO, no region code indication may be  
labeled even though playing the DVD VIDEO is  
prohibited by area restrictions.  
• HD layer on Super Audio CDs  
Also, the player cannot play the following discs:  
• A DVD VIDEO with a different region code.  
• A disc recorded in a color system other than  
NTSC, such as PAL or SECAM (this player  
conforms to the NTSC color system).  
• A disc that has a non-standard shape (e.g.,  
card, heart).  
• A disc with paper or stickers on it.  
• A disc that has the adhesive of cellophane tape  
or a sticker still left on it.  
SLV-DXXXX  
NO.  
X
Region code  
Notes about DVD+RWs/DVD+Rs,  
DVD-RWs/DVD-Rs or CD-Rs/CD-  
RWs  
Some DVD+RWs/DVD+Rs, DVD-RWs/DVD-  
Rs or CD-Rs/CD-RWs cannot be played on this  
player due to the recording quality or physical  
condition of the disc, or the characteristics of the  
recording device and authoring software.  
The disc will not play if it has not been correctly  
finalized. For more information, refer to the  
operating instructions for the recording device.  
Note that some playback functions may not  
work with some DVD+RWs/DVD+Rs, even if  
they have been correctly finalized. In this case,  
view the disc by normal playback. Also some  
DATA CDs/DATA DVDs created in Packet  
Write format cannot be played.  
continued  
This player can play the following discs 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Note on playback operations of  
DVDs and VIDEO CDs  
Notes about discs  
Some playback operations of DVDs and VIDEO  
CDs may be intentionally set by software  
producers. Since this player plays DVDs and  
VIDEO CDs according to the disc contents the  
software producers designed, some playback  
features may not be available. Also, refer to the  
instructions supplied with the DVDs or VIDEO  
CDs.  
• To keep the disc clean, handle the disc by its  
edge. Do not touch the surface.  
• Do not expose the disc to direct sunlight or  
heat sources such as hot air ducts, or leave it in  
a car parked in direct sunlight as the  
temperature may rise considerably inside the  
car.  
• After playing, store the disc in its case.  
• Clean the disc with a cleaning cloth.  
Wipe the disc from the center out.  
Music discs encoded with  
copyright protection technologies  
This product is designed to playback discs that  
conform to the Compact Disc (CD) standard.  
Recently, various music discs encoded with  
copyright protection technologies are marketed  
by some record companies. Please be aware that  
among those discs, there are some that do not  
conform to the CD standard and may not be  
playable by this product.  
Note on DualDiscs  
Do not use solvents such as benzine, thinner,  
commercially available cleaners, or anti-static  
spray intended for vinyl LPs.  
This product is designed to playback discs that  
conform to the Compact Disc (CD) standard. A  
DualDisc is a two sided disc product which  
mates DVD recorded material on one side with  
digital audio material on the other side. Please  
be aware that the audio side of a DualDisc may  
not play on this product because these discs do  
not conform to the CD standard.  
“DualDisc” is a trademark of the Recording  
Industry Association of America (RIAA).  
8
Notes about discs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Step 1 : Unpacking  
Check that you have received the following items with the DVD-VCR:  
• Remote commander  
• 75-ohm coaxial cable with F-type  
connectors  
• Size AA (R6) batteries  
Note  
The supplied remote commander is for the exclusive use of this DVD-VCR.  
Unpacking 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Step 2 : Setting up the remote commander  
Inserting the batteries  
Insert two size AA (R6) batteries by  
matching the + and – on the batteries  
to the diagram inside the battery  
compartment.  
Insert the negative (–) end first, then  
push in and down until the positive  
(+) end clicks into position.  
Remote sensor  
Using the remote  
commander  
You can use this remote commander  
to operate this DVD-VCR and a Sony  
TV. Buttons on the remote  
commander marked with an orange  
dot (•) can be used to operate your  
Sony TV.  
TV /  
DVD·VIDEO  
If the TV does not have the  
symbol near the remote sensor, this  
remote commander will not operate  
the TV.  
SELECT  
VIDEO  
SELECT  
DVD  
To operate  
Set TV / DVD·VIDEO to  
the DVD player DVD·VIDEO, then press SELECT DVD and point at the remote sensor at  
the DVD-VCR  
the VCR  
your TV  
Notes  
DVD·VIDEO, then press SELECT VIDEO and point at the remote sensor  
at the DVD-VCR  
TV and point at the remote sensor at your TV  
With normal use, the batteries should last about three to six months.  
If you do not use the remote commander for an extended period of time, remove the batteries  
to avoid possible damage from battery leakage.  
Do not use a new battery with an old one.  
Do not use different types of batteries.  
Do not leave the remote commander in an extremely hot or humid place.  
Do not drop any foreign object into the remote casing, particularly when replacing the batteries.  
Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so  
may cause a malfunction.  
10 Setting up the remote commander  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Controlling other TVs with the remote commander  
The remote commander is preprogrammed to control non-Sony TVs. If your TV is  
listed in the following table, set the appropriate manufacturer’s code number.  
Set TV / DVD·VIDEO at the top of the remote commander to TV.  
1
Hold down ?/1, and enter your TV’s code number using the number buttons.  
2 Then release ?/1.  
Now you can use the ?/1, VOL +/–, CH +/–, MUTING*, TV/VIDEO and ENTER*  
buttons to control your TV. You can also use the buttons marked with a dot (•) to  
control a Sony TV. To control the DVD-VCR, reset TV / DVD·VIDEO to  
DVD·VIDEO.  
* for Sony TV only  
Code numbers of controllable TVs  
If more than one code number is listed, try entering them one at a time until you find  
the one that works with your TV.  
TV brand  
Sony  
Code number  
TV brand  
Panasonic  
Philco  
Code number  
06, 19  
03, 04  
08  
01  
Akai  
04  
AOC  
04  
Philips  
Pioneer  
Portland  
Quasar  
Radio Shack  
RCA  
Centurion  
Coronado  
Curtis-Mathes  
Daewoo  
12  
16  
03  
03  
12  
06, 18  
05, 14  
04, 10  
12  
22  
Daytron  
12  
Emerson  
Fisher  
03, 04, 14  
11  
Sampo  
Sanyo  
11  
General Electric  
LG/Gold Star  
Hitachi  
06, 10  
03, 04, 17  
02, 03  
04, 12  
09  
Scott  
12  
Sears  
07, 10, 11  
03, 05, 18  
08, 12  
03, 08, 14  
07  
Sharp  
J.C.Penney  
JVC  
Sylvania  
Teknika  
Toshiba  
Wards  
KMC  
03  
Magnavox  
Marantz  
MGA/Mitsubishi  
NEC  
03, 08, 12  
04, 13  
04, 12, 13, 17  
04, 12  
03, 04, 12  
12  
Yorx  
Zenith  
15  
continued  
Setting up the remote commander 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Notes  
If you enter a new code number, the code number previously entered will be erased.  
If the TV uses a different remote control system from the one programmed to work with the  
DVD-VCR, you cannot control your TV with the remote commander.  
When you replace the batteries of the remote commander, the code number may change. Set  
the appropriate code number every time you replace the batteries.  
12 Setting up the remote commander  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 3 : Basic hookups  
Before you get started  
• Be sure to disconnect the AC power cord of each component before connecting.  
• Turn off the power to all equipment.  
• Do not connect the AC power cords until all of the connections are completed. If  
you connect the AC power cord before the connections are completed, you may not  
be able to use the Plug and Play function.  
• Be sure you make connections firmly. Loose connections may cause picture  
distortion.  
• If your TV does not match any of the examples provided, see your nearest Sony  
dealer or qualified technician.  
Selecting the best hookup option  
There are many ways in which your DVD-VCR can be hooked up. To hook up your  
DVD-VCR so that it works best for you, first scan through the table below. Then use  
the accompanying diagrams and procedures on the following pages to set up your  
DVD-VCR.  
If your TV has audio/video inputs, refer to page 14 for audio/video (A/V) hookup.  
Then follow one of the hookups below. If your TV does not have A/V inputs, go  
directly to one of the hookups below.  
If you have  
Use  
Refer to  
Antenna only, no cable TV  
Hookup 1  
(Plug and Play)  
No cable box or cable box with only a  
few scrambled channels  
Hookup 2  
(Plug and Play)  
Page 19  
Cable box with many scrambled  
channels  
Hookup 3  
After you have completed the connections, follow the instructions for setup.  
After you have completed the setup, you are ready to use your DVD-VCR.  
Procedures differ depending on the hookup you used.  
Caution  
Connections between the DVD-VCR’s VHF/UHF connector and the antenna terminals of the  
TV receiver should be made only as shown in the following instructions. Failure to do so may  
result in operation that violates the regulations of the Federal Communications Commission  
regarding the use and operation of RF devices. Never connect the output of the DVD-VCR to an  
antenna or make simultaneous (parallel) antenna and DVD-VCR connections at the antenna  
terminals of your receiver.  
Note to CATV system installer (in USA)  
This reminder is provided to call the CATV system installer’s attention to Article 820- 40 of the  
NEC that provides guidelines for proper grounding and, in particular, specifies that the cable  
ground shall be connected to the grounding system of the building, as close to the point of cable  
entry as practical.  
continued  
Basic hookups 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Audio/video (A/V) hookup  
If your TV has audio/video (A/V) input jacks, you will get better picture and sound if  
you hook up your DVD-VCR using these connections. If your TV does not have A/V  
inputs, see the following pages for antenna or cable hookups. Note that “Advanced  
Hookups” (page 62) explains additional hookup methods that will optimize the  
picture and sound for a true “hometheater” experience.  
If you are not planning to use your DVD-VCR to record programs, you only need to  
make the connections shown on this page. If you want to record regular or cable TV  
programs, complete these connections first, and then go to the following pages for  
antenna or cable hookups.  
A Use this hookup if your TV has stereo jacks  
DVD-VCR  
Stereo receiver  
TV  
Audio/video cord  
(not supplied)  
Audio cord (not supplied)  
B Use this hookup if your TV does not have stereo jacks  
DVD-VCR  
Stereo receiver  
TV  
Video cord  
(not supplied)  
Audio cord (not supplied)  
Notes  
To play a tape/disc in stereo, you must use the A/V connection.  
If you do not have a stereo receiver, connect the white LINE OUT/AUDIO L jack to the  
AUDIO IN jack on your TV.  
14 Basic hookups  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Hookup 1 (Plug and Play)  
Antenna hookup  
Make the following connections if you are using an antenna (if you do not have cable  
TV).  
A Use this hookup if you are using:  
• VHF/UHF antenna (you get channels 2–13 and channels 14 and higher)  
• UHF-only antenna (you get channels 14 and higher)  
• Separate VHF and UHF antennas  
Rear of TV  
VHF/UHF  
Match the type of  
connector on your  
TV: A, B, or C.  
A
or  
or  
VHF  
DVD-VCR  
B
UHF  
VHF  
C
UHF  
B Use this hookup if you are using a VHF-only antenna (you get  
channels 2–13 only)  
Rear of TV  
VHF/UHF  
A
Match the type of  
connector on your  
TV: A, B, or C.  
or  
or  
DVD-VCR  
VHF  
For connector  
types B and C, no  
UHF connection is  
required.  
B
UHF  
VHF  
C
UHF  
If you cannot connect your antenna cable to the DVD-VCR directly  
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external  
antenna connector (not supplied) so you can connect the cable to the IN connector. If  
you have separate cables for VHF and UHF antennas, you should use a U/V band  
mixer (not supplied) (page 112).  
continued  
Basic hookups 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Hookup 1 : DVD-VCR setup  
Plug the DVD-VCR into an AC outlet.  
The DVD-VCR automatically presets the DVD-VCR’s clock and TV channels  
when the DVD-VCR is plugged into the AC outlet.  
to AC outlet  
AC power cord  
The DVD-VCR starts presetting the  
clock and channels.  
When Auto preset is completed, the  
current time appears in the display  
window.  
You have now completed DVD-VCR setup.  
To change the on-screen display language to French or Spanish, see  
The clock is set using a time signal provided by some TV channels. If the clock  
is incorrect, or “–:–” appears in the display window, see “Using Manual Clock  
To add or disable channels manually, see “Presetting/disabling channels  
Notes  
If you connect the AC power cord before the antenna connections are completed, the channels  
may be incorrectly set. If this happens, see “Step 6 : Presetting channels” on page 26.  
Do not press any buttons on the DVD-VCR or remote commander during Auto preset.  
Auto preset starts automatically only when you plug in the AC power cord for the first time  
after you purchase the DVD-VCR.  
Auto preset can be performed by pressing x on the unit continuously for 5 seconds or more  
with the DVD-VCR power turned off.  
16 Basic hookups  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Hookup 2 (Plug and Play)  
You have no cable box, or a cable box with only a few  
scrambled channels  
Recommended use  
Use this hookup if you do not have a cable box. Also use this hookup if your cable  
system scrambles only a few channels.  
What you can do with this hookup  
• Record any unscrambled channel by selecting the channel on the VCR  
What you cannot do  
• Record scrambled channels that require a cable box  
DVD-VCR  
Rear of TV  
Wall  
VHF/UHF  
A
Match the type  
of connector  
on your TV: A,  
B, or C.  
or  
or  
VHF  
B
For connector  
types B and C,  
no UHF  
connection is  
required.  
UHF  
VHF  
Connect this cable  
directly to your TV if  
you do not have a  
cable box.  
Cable box  
C
UHF  
continued  
Basic hookups 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Hookup 2 : DVD-VCR setup  
Plug the DVD-VCR into an AC outlet.  
The DVD-VCR automatically presets the DVD-VCR’s clock and TV channels  
when the DVD-VCR is plugged into the AC outlet.  
to AC outlet  
AC power cord  
The DVD-VCR starts presetting the  
clock and channels.  
When Auto preset is completed, the  
current time appears in the display  
window.  
You have now completed DVD-VCR setup.  
To change the on-screen display language to French or Spanish, see  
The clock is set using a time signal provided by some TV channels. If the clock  
is incorrect, or “–:–” appears in the display window, see “Using Manual Clock  
To add or disable channels manually, see “Presetting/disabling channels  
Notes  
If you connect the AC power cord before the antenna connections are completed, the channels  
may be incorrectly set. If this happens, see “Step 6 : Presetting channels” on page 26.  
Do not press any buttons on the DVD-VCR or remote commander during Auto preset.  
Auto preset starts automatically only when you plug in the AC power cord for the first time  
after you purchase the DVD-VCR.  
Auto preset can be performed by pressing x on the unit continuously for 5 seconds or more  
with the DVD-VCR power turned off.  
18 Basic hookups  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Hookup 3  
Connecting a cable box with many scrambled channels  
Recommended use  
Use this hookup if your cable system scrambles all or most channels.  
What you can do with this hookup  
• Record any channel by selecting the channel on the cable box  
What you cannot do  
• Record with the cable box turned off  
• Record one channel while watching another channel  
Cable box  
Rear of TV  
VHF/UHF  
Wall  
A
Match the type of  
connector on your  
TV: A, B, or C.  
or  
or  
VHF  
B
For connector  
types B and C, no  
UHF connection  
is required.  
UHF  
VHF  
C
DVD-VCR  
UHF  
After you have completed hookup…  
After you have completed hookup, plug the DVD-VCR into an AC outlet and see  
to AC outlet  
AC power cord  
Basic hookups 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Step 4 : Selecting a language  
You can change the on-screen display  
language.  
SET UP  
Before you start…  
• Turn on the DVD-VCR and your TV.  
• To control the DVD-VCR, set TV /  
DVD·VIDEO to DVD·VIDEO on the  
remote (page 10).  
• Set the “RF Output Channel” to “3CH” or  
“4CH” in “OPTION SETUP” menu  
(page 110). If your TV is connected to the  
DVD-VCR using A/V connections, set the  
TV to video input.  
V/v  
ENTER  
• If the DVD player is in play mode, you  
cannot display the setup menu. Stop the  
DVD playback.  
Press SET UP, then press V/v to select  
(OPTION) and press ENTER.  
OPTION SETUP  
:English  
1
Language  
Clock Set/Adjust  
Channel Setup  
Auto Power Off  
[ Off ]  
RF Output Channel [3CH]  
V v  
ENTER RETURN SET UP  
Press V/v to select “Language”, then press  
LANGUAGE/IDIOMA/LANGUE  
2
ENTER.  
B
English  
Español  
Français  
The “LANGUAGE/IDIOMA/LANGUE”  
menu appears.  
V v  
ENTER RETURN SET UP  
Press V/v to select the desired language, English, Spanish or French, then  
press ENTER.  
3
20 Selecting a language  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Press SET UP to exit the menu.  
4
Selecting a language 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 5 : Setting the clock  
Using the Auto Clock Set  
feature  
SET UP  
Some TV and cable channels transmit time  
signals with their broadcasts. Your DVD-  
VCR can pick up this time signal to  
automatically set the clock.  
The Auto Clock Set feature works only if a  
channel in your area is broadcasting a time  
signal. If broadcasters in your area are not  
yet sending time signals, set the time  
manually (page 24).  
V/v/B/b  
ENTER  
Before you start…  
O RETURN  
• Turn on the DVD-VCR and your TV.  
When using a cable box, turn it on.  
• To control the DVD-VCR, set TV /  
DVD·VIDEO to DVD·VIDEO on the  
remote (page 10).  
• Set the “RF Output Channel” to “3CH” or  
“4CH” in “OPTION SETUP” menu  
(page 110). If your TV is connected to the  
DVD-VCR using A/V connections, set the  
TV to video input.  
• If the DVD player is in play mode, you  
cannot display the setup menu. Stop the  
DVD playback.  
Press SET UP, then press V/v to select  
(OPTION) and press ENTER.  
OPTION SETUP  
1
:English  
Language  
Clock Set/Adjust  
Channel Setup  
Auto Power Off  
[ Off ]  
RF Output Channel [3CH]  
V v  
ENTER RETURN SET UP  
Press V/v to select “Clock Set/Adjust”, then  
CLOCK SET/ADJUST  
2
press ENTER.  
Auto  
Manual  
The “CLOCK SET/ADJUST” menu appears.  
V v  
ENTER RETURN SET UP  
22 Setting the clock  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Press V/v to select “Auto”, then press  
CLOCK SET/ADJUST  
3
4
ENTER.  
Clock data CH  
[ Auto ]  
[ Auto ]  
[ Auto ]  
Time zone  
Daylight saving  
V v B b  
RETURN SET UP  
Press V/v to select the item you want, then press B/b to make the setting.  
• For “Clock data CH”  
Leave the setting to “Auto” to have the  
CLOCK SET/ADJUST  
Clock data CH  
Time zone  
Daylight saving  
[ 123 ]  
[ Auto ]  
[ Auto ]  
DVD-VCR automatically search for a  
channel that carries a time signal. Press B/b  
to select a channel that carries a time signal.  
Use this option if you know of a channel that  
carries a time signal. Most PBS member  
stations broadcast a time signal. For the  
fastest response, select your local PBS  
station.  
V v B b  
RETURN SET UP  
• For “Time zone”  
CLOCK SET/ADJUST  
Select the time zone of your area, or select  
“Auto” to have the DVD-VCR automatically  
set your time zone.  
Clock data CH  
[ Auto ]  
[ Pac. ]  
[ Auto ]  
Time zone  
Daylight saving  
The options are:  
Auto y Atl. (Atlantic) y East (Eastern)  
y Cen. (Central) y Mtn. (Mountain) y  
Pac. (Pacific) y Alas (Alaska) y  
Haw. (Hawaii) y Auto  
V v B b  
RETURN SET UP  
• For “Daylight saving”  
CLOCK SET/ADJUST  
Select “Yes” or “No” (standard time), or  
“Auto” to have the DVD-VCR automatically  
set the daylight saving time.  
Clock data CH  
Time zone  
Daylight saving  
[ Auto ]  
[ Auto ]  
[ No ]  
V v B b  
RETURN SET UP  
Press O RETURN, then press SET UP to exit the menu.  
5
6
To activate the Auto Clock Set function, turn off the DVD-VCR.  
continued  
Setting the clock 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Notes  
The clock cannot be set automatically if you do not receive a channel that carries a time  
signal in your area. If so, set the clock manually (page 24).  
If there are only a few channels in your area that carry time signals, setting the clock  
automatically may take up to about 20 minutes. If nothing happens even after you wait about  
20 minutes, set the clock manually (page 24).  
If you made Hookup 3, make sure you leave the cable box on.  
To record TV programs using the timer, you must set the clock accurately.  
The clock display appears when VIDEO mode is selected with no tape inserted or when the  
DVD-VCR is turned off.  
Using Manual Clock Set  
Before you start…  
SET UP  
• Turn on the DVD-VCR and your TV.  
• To control the DVD-VCR, set TV /  
DVD·VIDEO to DVD·VIDEO on the  
remote (page 10).  
• Set the “RF Output Channel” to “3CH” or  
“4CH” in “OPTION SETUP” menu  
(page 110). If your TV is connected to the  
DVD-VCR using A/V connections, set the  
TV to video input.  
V/v/B/b  
ENTER  
• If the DVD player is in play mode, you  
cannot display the setup menu. Stop the  
DVD playback.  
Press SET UP, then press V/v to select  
(OPTION) and press ENTER.  
OPTION SETUP  
1
:English  
Language  
Clock Set/Adjust  
Channel Setup  
Auto Power Off  
[ Off ]  
RF Output Channel [3CH]  
V v  
ENTER RETURN SET UP  
Press V/v to select “Clock Set/Adjust”, then  
CLOCK SET/ADJUST  
2
press ENTER.  
Auto  
Manual  
The “CLOCK SET/ADJUST” menu appears.  
V v  
ENTER RETURN SET UP  
24 Setting the clock  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Press V/v to select Manual, then press  
CLOCK SET/ADJUST  
Date Year  
3
4
5
6
ENTER.  
Time  
A
12:00  
1/01 2005 Sat  
M
V v B b  
ENTER RETURN SET UP  
CLOCK SET/ADJUST  
Press V/v to set the hour.  
Time  
12:00  
Date Year  
1/01 2005 Sat  
A
M
V v B b  
ENTER RETURN SET UP  
CLOCK SET/ADJUST  
Press b to select the minutes and set the  
minutes by pressing V/v.  
Time  
12:00  
Date Year  
1/01 2005 Sat  
A
M
V v B b  
ENTER RETURN SET UP  
CLOCK SET/ADJUST  
Set the month, day, and year in sequence by  
pressing b to select the item to be set, and  
press V/v to select the digits, then press b.  
Time  
12:00  
Date Year  
10/06 2005 Thu  
A
M
The day of the week is set automatically.  
V v B b  
ENTER RETURN SET UP  
Press ENTER to confirm the setting.  
7
8
Press SET UP to exit the menu.  
Tip  
To change the digits while setting, press B to return to the item to be changed, and select the  
digits by pressing V/v.  
Notes  
To record TV programs using the timer, you must set the clock accurately.  
The clock display appears when VIDEO mode is selected with no tape inserted or when the  
DVD-VCR is turned off.  
Setting the clock 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 6 : Presetting channels  
This DVD-VCR is capable of receiving VHF  
channels 2 to 13, UHF channels 14 to 69 and  
unscrambled CATV channels 1 to 125. First,  
we recommend that you preset the receivable  
channels in your area using automatic  
SET UP  
presetting methods. Then, if there are any  
unwanted channels, disable them manually.  
If you have already decided which channels  
you wish to preset, set them directly using  
manual presetting methods (page 28).  
V/v/B/b  
ENTER  
Presetting all receivable  
channels automatically  
Before you start…  
• Turn on the DVD-VCR and your TV.  
When using a cable box, turn it on.  
• To control the DVD-VCR, set TV /  
DVD·VIDEO to DVD·VIDEO on the  
remote (page 10).  
• Set the “RF Output Channel” to “3CH” or  
“4CH” in “OPTION SETUP” menu  
(page 110). If your TV is connected to the  
DVD-VCR using A/V connections, set the  
TV to video input.  
• If the DVD player is in play mode, you  
cannot display the setup menu. Stop the  
DVD playback.  
Press SET UP, then press V/v to select  
(OPTION) and press ENTER.  
OPTION SETUP  
1
:English  
Language  
Clock Set/Adjust  
Channel Setup  
Auto Power Off  
[ Off ]  
RF Output Channel [3CH]  
V v  
ENTER RETURN SET UP  
26 Presetting channels  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Press V/v to select “Channel Setup”, then  
CHANNEL SETUP  
[ Cable TV ]  
Auto Channel Memory  
Channel Add/Delete  
Guide Channel Setup  
2
press ENTER.  
Ant/Cable  
The “CHANNEL SETUP” menu appears.  
V v B b  
RETURN SET UP  
Press V/v to select “Ant/Cable.”  
3
4
• To preset cable TV channels:  
Press B/b to select “Cable TV.”  
CHANNEL SETUP  
[ Cable TV ]  
Ant/Cable  
Auto Channel Memory  
Channel Add/Delete  
Guide Channel Setup  
V v B b  
RETURN SET UP  
To preset VHF and UHF channels:  
Press B/b to select “Antenna.”  
CHANNEL SETUP  
[ Antenna ]  
Auto Channel Memory  
Channel Add/Delete  
Guide Channel Setup  
Ant/Cable  
V v B b  
RETURN SET UP  
Press V/v to select “Auto Channel Memory,”  
then press ENTER.  
AUTO CH MEMORY  
5
Memorizing  
All receivable channels are preset in numerical  
sequence. When no more receivable channels  
can be found, presetting stops and the picture  
from the lowest numbered channel is displayed  
on the TV screen.  
Please Wait  
RETURN SET UP  
continued  
Presetting channels 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Presetting/disabling channels manually  
Before you start…  
• Turn on the DVD-VCR and your TV.  
When using a cable box, turn it on.  
• To control the DVD-VCR, set TV /  
DVD·VIDEO to DVD·VIDEO on the  
remote (page 10).  
CH +/–  
• Set the “RF Output Channel” to “3CH” or  
“4CH” in “OPTION SETUP” menu  
(page 110). If your TV is connected to the  
DVD-VCR using A/V connections, set the  
TV to video input.  
Number  
buttons  
• If the DVD player is in play mode, you  
cannot display the setup menu. Stop the  
DVD playback.  
SET UP  
V/v/B/b  
ENTER  
O RETURN  
Press SET UP, then press V/v to select  
(OPTION) and press ENTER.  
OPTION SETUP  
1
:English  
Language  
Clock Set/Adjust  
Channel Setup  
Auto Power Off  
[ Off ]  
RF Output Channel [3CH]  
V v  
ENTER RETURN SET UP  
Press V/v to select “Channel Setup”, then  
CHANNEL SETUP  
2
press ENTER.  
Ant/Cable  
[ Cable TV ]  
Auto Channel Memory  
Channel Add/Delete  
Guide Channel Setup  
The “CHANNEL SETUP” menu appears.  
V v B b  
RETURN SET UP  
Press V/v to select “Channel Add/Delete,” then press ENTER.  
3
28 Presetting channels  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
To preset/disable a channel:  
4
Channel to be preset  
1 Press CH +/– or number buttons to enter  
the channel number.  
2 Press B/b to select “ADD” (in memory)  
or “DELETE” (deleted).  
CHANNEL ADD/DELETE  
Select channel:  
(in memory)  
3 Press ENTER.  
and press  
press  
to ADD  
to DELETE  
Channel to be disabled  
CHANNEL ADD/DELETE  
Select channel:  
(deleted)  
and press  
press  
to ADD  
to DELETE  
Press O RETURN to confirm the setting.  
5
6
Press SET UP to exit the menu.  
Note  
If you have not preset channels automatically, you cannot preset/disable channels manually.  
Presetting channels 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Step 7 : Setting up the VCR Plus+® system  
(SLV-D560P only)  
How the VCR Plus+ system works  
Example of “PlusCode”  
Whenever you want to record a TV program,  
all you need to do is look up the “PlusCode”  
PlusCode  
number, a number assigned to each program  
published in the TV section of most  
14  
2
5:30  
6:30  
MOVIE Musical (2hrs.) 33044  
SPORT Golf (1hr. 25min.) 42060  
newspapers, cable TV listings, and even TV  
GUIDE magazine. Then, just enter the  
PlusCode number of the program you want  
and the VCR is automatically programmed to  
record that show. It’s that simple.  
CNN  
WS 9974  
DRAMA Comedy (2hrs.) 17390  
2
5
3
4
SCIENCE AND TECHNOLOGY  
(1hr. 15min.) 73457  
How to set up your VCR  
Example of “Channel Line-up Chart”  
Setting up your VCR involves coordinating  
the TV channel number (the number you turn  
to on your TV or VCR to watch a program)  
with the guide channel (the number that is  
assigned to that channel in your program  
guide).  
CABLE  
CH  
VCR Plus+  
CABLE TV  
GUIDE CH  
16  
17  
20  
21  
22  
25  
34  
35  
5
AMC American Movie Classics  
BRV Bravo (program grid only)  
CNN Cable News Network  
CSP C-SPAN  
35  
54  
42  
28  
53  
37  
34  
47  
33  
46  
45  
48  
38  
59  
70  
41  
43  
58  
49  
52  
44  
To find the guide channel numbers, look at  
the “Channel Line-up Chart” in the program  
guide for your area that features VCR  
PlusCode numbers. It usually looks like the  
example to the right.  
DIS The Disney Channel  
DSC The Discovery Channel  
ESN ESPN  
FAM The Family Channel  
HBO Home Box Office  
LIF Lifetime  
27  
29  
30  
31  
38  
39  
45  
17  
44  
49  
50  
51  
To set the guide channels, use the Channel  
Line-up Chart to check that the guide channel  
numbers match the TV channel your VCR  
receives. For example, if HBO is listed in the  
Channel Line-up Chart as channel 33, and  
your VCR receives HBO on channel 5, you  
need to coordinate these numbers using the  
following procedure. If the guide and TV  
channel numbers are the same, you can skip  
this procedure.  
MAX Cinemax  
MTV Music Television  
NIK Nickelodeon  
SC Sports Channel  
SCA Sports Channel America  
SHO Showtime  
TBS TBS SuperStation  
TMC The Movie Channel  
TNN The Nashville Network  
TNT Turner Network Television  
USA USA Network  
Setting up the VCR Plus+® system (SLV-D560P only)  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
SET UP  
V/v/B/b  
ENTER  
O RETURN  
Press SET UP, then press V/v to select  
(OPTION) and press ENTER.  
OPTION SETUP  
1
:English  
Language  
Clock Set/Adjust  
Channel Setup  
Auto Power Off  
[ Off ]  
RF Output Channel [3CH]  
V v  
ENTER RETURN SET UP  
Press V/v to select “Channel Setup”, then  
CHANNEL SETUP  
2
3
press ENTER.  
Ant/Cable  
[ Cable TV ]  
Auto Channel Memory  
Channel Add/Delete  
Guide Channel Setup  
The “CHANNEL SETUP” menu appears.  
V v B b  
RETURN SET UP  
Press V/v to select “Guide Channel Setup,”  
then press ENTER.  
GUIDE CHANNEL SETUP  
[GUIDE CH]  
[TV CH]  
Enter actual  
receiving channel  
V v B b  
RETURN SET UP  
continued  
Setting up the VCR Plus+® system (SLV-D560P only)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
The upper row shows VCR Plus+ guide channels and the lower row shows  
TV channels or cable box out put channels. Press B/b to select the channel  
number that does not match the guide channel.  
4
5
• If you made Hookup 1 (page 15) or 2 (page 17): Enter the actual number  
on your TV (and VCR), then press V/v.  
• If you made Hookup 3 (page 19): Enter the cable box output channel  
(usually 2, 3, or 4), then press V/v.  
Repeat steps 4 and 5 for each channel number that does not match.  
6
7
Press O RETURN to confirm the setting.  
Press SET UP to exit the menu.  
8
Setting up the VCR Plus+® system (SLV-D560P only)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
Basic Operations  
Playing discs  
Depending on the disc, some operations may  
be different or restricted. Refer to the  
operating instructions supplied with your  
disc.  
?/1  
Z
Before you start ...  
• Turn on the DVD-VCR and your TV.  
• Switch the input selector on your TV so  
that the signal from the player appears on  
the TV screen.  
• Set TV / DVD·VIDEO to DVD·VIDEO,  
then press SELECT DVD to control the  
DVD player (page 10).  
/
m/M y  
./ >  
X PAUSE  
x STOP  
H PLAY  
Press Z to open the disc tray and  
place a disc on the disc tray.  
1
with the playback  
side facing down  
continued  
Playing discs 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Press H PLAY.  
2
The disc tray closes and the  
DVD player starts playback.  
The display window shows the  
playback time*.  
Hour Minute Second  
Depending on the disc, a menu  
may appear on the TV screen.  
For DVDs, see page 77. For VIDEO CDs, see page 99.  
* “– – – – –” appears when no disc is loaded.  
Tip  
To make a video timer reservation during DVD playback, we recommend performing the  
Notes  
You can change the screen type using the “SCREEN SETUP” menu (see “Screen Setup” on  
Stop VIDEO playback while playing back a disc.  
If you play a DVD or VIDEO CD that has scratches, the player may stop playback at the  
point of the scratch.  
Playback of play lists longer than 10 hours recorded in VR mode is not guaranteed.  
Additional tasks  
To  
Press  
Stop play  
x STOP  
X PAUSE  
H PLAY  
SKIP  
Pause play*1  
Resume play after pause  
Go to the next frame in pause  
mode  
Go to the previous frame in  
pause mode  
REPLAY  
> NEXT on the remote or M on the unit  
Go to the next chapter, track, or  
scene in continuous play mode  
Go back to the previous chapter, . PREV on the remote or m on the unit  
track, or scene in continuous  
play mode  
34 Playing discs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
To  
Press  
Locate a point quickly  
m or M on the remote (or hold down m or M  
on the unit)  
The playback speed changes as follows each time you  
press the button on the remote (or depending on how long  
you press the button on the unit):  
DVD  
fast forward: PLAY t ×1.4 ••N*2 t 1M t  
2M t 3M t 4M t 5M t 6M  
fast reverse: PLAY t 1m t 2m t 3m t  
4m t 5m t 6m  
CD, MP3 and VIDEO CD  
fast forward: PLAY t 1M t 2M t 3M  
fast reverse: PLAY t 1m t 2m t 3m  
When you find the point you want, press H PLAY.  
X PAUSE during playback, then press or y  
Watch slow motion in  
continuous play mode  
(DVD and VIDEO CD only)  
The playback speed changes as follows each time you  
press  
or y:  
DVD  
forward slow motion: ×0.6••N*2 t 2 y t 3 y  
reverse slow motion (except for DVD-RW in VR  
mode): 1  
t 2  
t 3  
VIDEO CD  
forward slow motion only: 1 y t 2 y t 3 y  
To resume normal playback, press H PLAY.  
Replay the previous scene for 10  
seconds in continuous play  
mode*3 (Instant Replay)  
REPLAY  
Briefly fast forward the current  
scene for 30 seconds in  
continuous play mode*3*4  
(Instant Advance)  
SKIP  
Stop play and remove the disc  
Z
*1 If you pause the DVD player for more than 5 minutes, the DVD player will automatically stop.  
*2 Playback quickly or slowly with sound (See “To playback quickly or slowly with sound (DVD  
*3 For DVD VIDEOs and DVD-RWs/DVD-Rs or DVD+RWs/DVD+Rs only  
*4 You can press  
SKIP up to 4 times. This allows you to fast foward up to 2 minutes in total.  
Tips  
The Instant Replay function is useful when you want to review a scene or dialog that you  
missed.  
The Instant Advance function is useful when you want to pass over a scene that you do not  
want to watch.  
continued  
Playing discs 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Notes  
No sound is output except for:  
– during normal play  
– during playback quickly or slowly with sound  
You cannot perform playback quickly or slowly with sound when a virtual surround effect is  
set.  
The fast reverse operation may not be possible for CD, MP3 and VIDEO CD depending on  
the recording method.  
You may not be able to use the Instant Replay or Instant Advance function with some scenes.  
Switching between original (ORG) and play list (PL) within a disc recorded in VR mode is  
possible only while the disc is stopped. Press TOP MENU to switch between ORG and PL.  
To playback quickly or slowly with sound (DVD only)  
You can listen to dialog or sound while playing the current scene quickly or slowly.  
To playback quickly, press M during playback.  
To playback slowly, press X PAUSE, then press y during playback.  
Press H PLAY to return to normal playback.  
Notes  
You cannot set virtual surround effects while performing playback quickly or slowly with  
sound. In addition, you cannot perform playback quickly or slowly with sound when a  
virtual surround effect is set.  
You cannot perform DTS audio output during playback quickly or slowly with sound.  
To Resume playback for the current disc (Resume Play)  
The DVD player remembers the point where you stopped the disc even if the DVD  
player enters standby mode by pressing ?/1.  
While playing a disc, press x STOP to stop playback.  
1
2
Press H PLAY.  
The DVD player starts playback from the point where you stopped the disc in  
Step 1.  
Tip  
To begin playback from the top of the disc, press x STOP twice then press H PLAY.  
36 Playing discs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Notes on playing DTS* sound tracks on a CD  
When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks.  
To avoid possible damage to the audio system, the consumer should take proper precautions  
when the analog stereo jacks of the DVD player are connected to an amplification system. To  
enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be  
connected to the digital jack of the DVD player.  
Set the sound to “Stereo” using the AUDIO button when you play DTS sound tracks on a CD  
Do not play DTS sound tracks without first connecting the DVD player to an audio  
component having a built-in DTS decoder. The DVD player outputs the DTS signal via the  
DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack even if “DTS” is set to “Off” in  
“AUDIO SETUP” menu (page 66), and may affect your ears or cause your speakers to be  
damaged.  
Notes on playing DVDs with a DTS sound track  
DTS audio signals are output only through the DIGITAL AUDIO OUT (COAXIAL or  
OPTICAL) jack.  
When you play a DVD with DTS sound tracks, set “DTS” to “On” in “AUDIO SETUP”  
If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to  
“On” in “AUDIO SETUP” menu (page 66). A loud noise may come out from the speakers,  
affecting your ears or causing the speakers to be damaged.  
* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.  
Playing discs 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Guide to the on-screen display  
You can check disc information during  
playback.  
Number buttons  
The displayed contents differ according to  
the type of disc being played.  
V/v/B/b  
ENTER  
O RETURN  
DISPLAY  
Press DISPLAY during playback. The following information appears; type of disc,  
current title/track, chapter, counter position, voice language, subtitle language and  
Custom AV Mode setting. Refer to “DVD Audio/Subtitle Language” on page 126 for  
the abbreviation of the language.  
Type of disc  
Current title/track number  
1/3  
Current chapter number  
1/36  
Counter position  
T 0:01:09  
Voice language  
Subtitle language  
Custom AV Mode  
ENG 5.1CH  
ENG (3/5)  
Standard  
V
v
B
b
0
~
9
ENTER  
Note  
You cannot select disc information items when the disc is stopped.  
38 Guide to the on-screen display  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To playback the desired title/track or chapter  
You can playback the desired title/track or chapter using  
this menu.  
Press V/v during playback to select the desired item.  
1
1/3  
1/36  
Press B/b to change the item.  
T 0:01:09  
ENG 5.1CH  
ENG (3/5)  
Standard  
2
Press ENTER to start playback.  
3
V
v
B
b
0
~
9
ENTER  
Press DISPLAY or O RETURN to turn off the  
4 menu.  
The title/track or chapter icon will appear on the DVD playback screen followed by  
the current title/track or chapter number and the counter position.  
To playback from the desired title/track counter position  
You can playback from the desired title/track counter  
position using this menu.  
Press V/v during playback to select the counter  
1 position icon.  
1/3  
1/36  
Enter the desired elapsed playing time of the current  
T 0:01:09  
2 title/track using the number buttons.  
ENG 5.1CH  
ENG (3/5)  
Press ENTER to start playback.  
Standard  
3
V
v
B
b
0
~
9
ENTER  
Press DISPLAY or O RETURN to turn off the  
4 menu.  
Tip  
You can change the counter position information (playing time or remaining time) using  
B/b (DVD and CD only).  
DVD  
Indication  
Counter information  
T
: ∗∗ : ∗∗  
Elapsed playing time of the current title  
Remaining time of the current title  
Elapsed playing time of the current chapter  
Remaining time of the current chapter  
T– : ∗∗ : ∗∗  
C
: ∗∗ : ∗∗  
C– : ∗∗ : ∗∗  
CD  
Indication  
Counter information  
T
: ∗∗ : ∗∗  
T– : ∗∗ : ∗∗  
: ∗∗ : ∗∗  
D– : ∗∗ : ∗∗  
Elapsed playing time of the current track  
Remaining time of the current track  
Elapsed playing time of the disc  
Remaining time of the disc  
D
continued  
Guide to the on-screen display 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Notes  
The display may not change as operated depending on the disc.  
The display window continue indicating the playing time even when the counter position  
information on the on-screen display is being changed.  
To adjust the playback picture (Custom AV Mode)  
You can adjust the video signal of the DVD or VIDEO CD (with PBC function off)  
from the player to obtain the picture quality you want. Choose the setting that best  
suits the program you are watching.  
Press V/v during playback to select the Custom AV  
1 Mode icon.  
1/3  
1/36  
T 0:01:09  
ENG 5.1CH  
ENG (3/5)  
Standard  
V
v
B
b
Press B/b to change the setting.  
2
Setting  
Video Setting  
Audio Setting  
Dynamic 1  
Produces a bold dynamic picture Full (modulated) sound with  
by increasing the picture contrast clear treble and bass.  
and the color intensity.  
Dynamic 2  
Produces a more dynamic  
picture than Dynamic 1 by  
further increasing the picture  
contrast and the color intensity.  
Full (modulated) sound with  
even clearer treble and bass than  
Dynamic 1.  
Standard  
Cinema 2  
Cinema 1  
Off (Default setting)  
Displays a standard picture.  
Standard sound.  
Enhances details in dark areas by Powerful sound with even  
increasing the black level.  
stronger bass than Cinema 1.  
White colors become brighter  
and black colors become richer,  
and the color contrast is  
increased.  
Powerful sound with strong bass.  
Tip  
When you watch a movie, “Cinema 1” or “Cinema 2” is recommended.  
40 Guide to the on-screen display  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Locking the disc tray (Child Lock)  
You can lock the disc tray so that the disc tray  
is not opened by mistake.  
SELECT DVD  
X x  
To lock the disc tray  
When the DVD-VCR is turned on, press x, X and SELECT DVD on the unit at the  
same time. “LOCK” appears in the display window. The disc tray is locked.  
To unlock the disc tray  
Press x, X and SELECT DVD on the unit at the same time. The disc tray is  
unlocked.  
Notes  
If you lock the disc tray while open, the disc tray will be locked after closing.  
You cannot lock the disc tray when the DVD-VCR is turned off. If the DVD-VCR is turned  
on, you can lock the disc tray either in play mode or stop mode.  
Locking the disc tray (Child Lock) 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Playing a tape  
Before you start ...  
• Turn on the DVD-VCR and your TV.  
?/1  
• Switch the input selector on your TV so  
that the signal from the player appears on  
the TV screen.  
Z
TRACKING +/–  
• Set TV / DVD·VIDEO to DVD·VIDEO,  
then press SELECT VIDEO to control the  
CLEAR  
/
m/M y  
./>  
X PAUSE  
x STOP  
H PLAY  
DISPLAY  
Insert a tape.  
1
The VCR starts playing automatically if  
you insert a tape with its safety tab  
removed.  
Press H PLAY.  
2
The display window shows the  
playback time.  
When the tape reaches the end,  
it will rewind automatically.  
Hour Minute Second  
42 Playing a tape  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Additional tasks  
To  
Press  
Stop play  
x STOP  
Pause play*  
X PAUSE  
Resume play after pause  
Fast-forward the tape  
Rewind the tape  
Eject the tape  
X PAUSE or H PLAY  
M during stop  
m during stop  
Z
* If you pause the VCR for more than 5 minutes, the VCR will automatically resume play.  
To turn off the power while rewinding (Rewind Shut Off)  
Press ?/1 while the tape is rewinding. The power will turn off but the tape will keep  
rewinding until it reaches the end.  
To play/search at various speeds  
Playback options  
Operation  
View the picture during fast-  
forward or rewind  
During fast-forward, hold down M. During rewind, hold  
down m.  
Play at high speed  
During playback, briefly press M or m. The tape  
continues to play at 5 times normal speed.  
During playback, hold down M or m. The tape  
continues to play at 5 times normal speed. When you  
release the button, normal playback resumes.  
During pause, press y.  
During pause, press  
Play in slow motion  
Play frame by frame  
SKIP.  
REPLAY.  
Replay the previous scene in  
continuous play mode*1  
(Instant Replay)  
During playback, press  
Fast forward the current scene  
for 30 seconds in continuous  
play mode*2 (Instant Skip)  
During playback, press  
SKIP.  
Play at various speeds  
(Shuttle play)  
During playback, press .or >. You can change the  
playback speed as follows.  
× 7 y × 5 y × 3 y STILL y SLOW y PLAY  
y × 2 y × 3 y × 5 y × 7  
*1 For 10 seconds in SP or LP mode/for 15 seconds in EP mode  
*2 You can press  
SKIP up to 4 times. This allows you to fast forward up to 2 minutes in total.  
continued  
Playing a tape 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                         
To resume normal playback  
Press H PLAY.  
To use the time counter  
Press CLEAR at the point on the tape that you want to find later. The counter in the  
display window resets to “0:00:00.” To search for the counter 0:00:00 point  
To display the counter on the TV screen, press DISPLAY during normal playback.  
Tip  
Adjust the picture using the TRACKING +/– buttons if:  
– Streaks appear while playing in slow motion.  
– Bands appear at the top or bottom while pausing.  
– The picture shakes during pause.  
Notes  
Tapes recorded in LP mode on other VCRs can be played back on this VCR but the picture  
quality cannot be guaranteed.  
The counter resets to “0:00:00” whenever a tape is reinserted.  
The counter stops counting when it comes to a portion with no recording.  
When 10 hours have passed, the counter in the display window returns to “0:00:00” and the  
count starts over again.  
No sound is output during playback at various speeds.  
The picture may show noise when playing at high speed in reverse.  
While playing a tape, you can display the setup menu, but the remote commander’s function  
switches to DVD automatically. Press O RETURN repeatedly to exit the menu.  
When playback does not start even if you insert a tape with its safety tab removed, set “Auto  
Play” to “On” in the “VIDEO FUNCTION SETUP” menu (page 106).  
Stop disc playback while playing back a video.  
The VCR can also play S-VHS tapes recorded by S-VHS mode. The VCR will automatically  
identify the type of tape inserted in the VCR (either VHS or S-VHS). When S-VHS tapes are  
played in the VCR, the enhanced resolution will not be visible on screen; there may also be  
picture distortion while playing the S-VHS tape in slow motion or while utilizing other  
special playback modes. The VCR will not record in S-VHS mode on an S-VHS tape.  
The playback of S-VHS tapes recorded in EP/LP mode cannot be guaranteed.  
44 Playing a tape  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Recording TV programs  
Before you start ...  
• Turn on the DVD-VCR and your TV.  
?/1  
• Switch the input selector on your TV so  
that the signal from the player appears on  
the TV screen.  
Z
CH +/–  
• Set TV / DVD·VIDEO to DVD·VIDEO,  
then press SELECT VIDEO to control the  
Number buttons  
• To record from a cable box, turn it on.  
• Make sure the tape is longer than the total  
recording time.  
TV/VIDEO  
INPUT  
SELECT  
z REC  
SP/EP  
x STOP  
H PLAY  
ENTER  
DISPLAY  
Insert a tape with its safety tab in place.  
1
Press CH +/– to select the channel or line input video source you want to  
record.  
2
continued  
Recording TV programs 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Press SP/EP to select the tape speed, SP or EP.  
3
4
EP (Extended Play) provides recording time three times as long as SP  
(Standard Play). However, SP produces better picture and audio quality.  
Press z REC to start recording.  
RECappears in the display window.  
To stop recording  
Press x STOP.  
To check the remaining tape length  
Press DISPLAY to display the time counter. With the display on, press DISPLAY  
again to check the remaining time. The white bar indicates the current location in  
relation to the entire tape length. The remaining time also appears. Press DISPLAY  
to turn off the indicators.  
Time counter  
Remaining tape length  
To check the remaining tape length of a tape, set Tape Lengthin the VIDEO  
FUNCTION SETUPmenu correctly (page 106).  
Maximum Recording Time  
Tape Length  
T-120  
SP  
2 hrs  
EP  
6 hrs  
8 hrs  
9 hrs  
T-160  
2 hrs 40 mins  
3 hrs  
T-180  
46 Recording TV programs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
To watch another TV program while recording  
Press TV/VIDEO to display “TV” in the display window.  
1
If your TV is connected to the VCR using A/V connections, set the TV to the  
2 TV’s antenna input; if not, skip this step.  
Select another channel on the TV.  
3
To watch a DVD while recording  
Press SELECT DVD to control the DVD player.  
1
2
3
Press Z and place the disc on the disc tray.  
Press H PLAY.  
The disc tray closes and the DVD player starts playback. The TV screen will  
automatically change to the DVD playback screen.  
To save a recording  
To prevent accidental erasure, break  
off the safety tab as illustrated. To  
record on the tape again, cover the tab  
hole with adhesive tape.  
Safety tab  
Tips  
To select a channel, you can use the number buttons on the remote commander. Enter the  
channel number, then press ENTER.  
You can select a video source from the LINE IN 1 or LINE-2 IN jacks using the INPUT  
SELECT button.  
The display appears on the TV screen indicating information about the tape, but the  
information will not be recorded on the tape.  
If you do not want to watch TV while recording, you can turn off the TV. When using a cable  
box, make sure to leave it on.  
Notes  
The remaining tape length may not be indicated accurately for short tapes such as T-20 or  
T-30, or tapes recorded in LP mode.  
It may take up to one minute for the VCR to calculate and display the remaining tape length  
after you press DISPLAY.  
You cannot record a DVD to a VCR tape.  
To watch a TV program during video recording, stop disc playback.  
Recording TV programs 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Recording TV programs using the timer  
You can preset up to eight programs at a  
time.  
Before you start…  
Z
• Check that the DVD-VCR clock is set to  
the correct time.  
• Turn on the DVD-VCR and your TV.  
• Switch the input selector on your TV so  
that the signal from the player appears on  
the TV screen.  
• Set TV / DVD·VIDEO to DVD·VIDEO,  
then press SELECT VIDEO to control the  
• When using a cable box, turn it on.  
CLEAR  
SET UP  
TV/VIDEO  
TIMER  
INPUT  
SELECT  
• Insert a tape with its safety tab in place.  
Make sure the tape is longer than the total  
recording time.  
• If the DVD player is in play mode, you  
cannot display the setup menu. Stop the  
DVD playback.  
x STOP  
H PLAY  
V/v/B/b  
ENTER  
O RETURN  
Press SET UP, then press V/v to select  
CH START  
END  
DATE SPEED  
1
(PROGRAM) and press ENTER. You can also  
display the timer programming menu by  
pressing TIMER.  
The timer programming menu appears.  
V v B b  
RETURN  
48 Recording TV programs using the timer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Set the channel number, start and stop times,  
date, and tape speed:  
CH START  
35  
END  
DATE SPEED  
2
3
1 Press b to select each item in turn.  
2 Press V/v to set each item.  
To correct a setting, press B to return to that  
setting and reset.  
V v B b  
RETURN CLEAR  
• To record from a source connected to the  
LINE IN 1 or LINE-2 IN jacks, press INPUT SELECT or V/v to display  
“L1 ” or “L2” in the “CH” position.  
To record the same program every day or the same day every week, press  
v while the date is flashing. For details, see “Daily/weekly recording” on  
To use the Auto Tape Speed function, press v to display “Auto” in the  
“SPEED” position. For details, see “To use the Auto Tape Speed  
Press b to confirm the setting.  
To enter another setting, press V/v to select the next row and repeat step 2.  
Press CLEAR to cancel the setting.  
Press O RETURN to exit the menu.  
4
5
The  
indicator appears in the display window and the VCR stands by for  
recording. Timer recording will operate properly regardless if the DVD-  
VCR power is on or off.  
To record from a decoder or other source, leave the connected equipment  
switched on.  
To stop recording  
To stop the DVD-VCR while recording, press SELECT VIDEO and then press  
x STOP.  
Daily/weekly recording  
In step 2 above, press v to select the recording pattern. Each time you press v, the  
indication changes as shown below. Press V to change the indication in reverse order.  
the current date t Daily t Mo~Sa t Mo~Fr tSun’s t Mon’s t ..... t Sat’s  
t 1 month later t (dates count down) t the current date  
continued  
Recording TV programs using the timer 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
To use the Auto Tape Speed function  
When you are recording a program in the Auto mode and the remaining tape becomes  
shorter than the recording time, the tape speed is automatically changed to EP mode.  
Note that some noise will appear on the picture when the tape speed is changed. If  
you want to keep the tape speed, select SP. To operate this function, set “Tape  
Length” in “VIDEO FUNCTION SETUP” menu correctly (page 106).  
To watch another TV program after setting the timer  
Press TV/VIDEO to display “TV” in the display window.  
1
If your TV is connected to the VCR using A/V connections, set the TV to the  
2 TV’s antenna input; if not, skip this step.  
Select another channel on the TV.  
3
To watch a DVD after setting the timer  
Press SELECT DVD to control the DVD player.  
1
2
3
Press Z and place the disc on the disc tray.  
Press H PLAY.  
The disc tray closes and the DVD player starts playback. The TV screen will  
automatically change to the DVD playback screen.  
Tips  
If the indicator appears, the timer settings overlap. To check, change or cancel the timer  
If the  
indicator appears, this means that the VCR is currently recording this program.  
You can also do the following tasks while the VCR is recording:  
– Reset the counter (page 44).  
– Display tape information on the TV screen (page 46).  
Note  
The  
tape inserted.  
indicator flashes in the display window when you complete the timer setting with no  
50 Recording TV programs using the timer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Recording TV programs using the Dial  
Timer (SLV-D560P only)  
The Dial Timer function allows you to make  
?/1 POWER CHANNEL +/–  
timer recordings of programs without turning  
on your TV. Set the recording timer to record  
up to eight programs that will be broadcast  
within a month using the DIAL TIMER. The  
recording start time and recording stop time  
can be set at one minute intervals.  
DIAL TIMER X  
Before you start…  
• Turn on the DVD-VCR.  
• When using a cable box, turn it on.  
• Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording  
time.  
Press DIAL TIMER.  
1
DATE indicator appears and the current date flashes in the display window.  
If the date and time are not set, MONTH indicator will appear.  
To set the date and time, see “To set the clock” on page 54.  
Turn DIAL TIMER to set the recording date.  
2
continued  
Recording TV programs using the Dial Timer (SLV-D560P only) 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Press DIAL TIMER to set the start time.  
3
“START” and the next quarter hour increment appear alternately in the  
display window.  
Turn DIAL TIMER to set the recording start time.  
4
5
You can set the recording start time in 15 minute intervals or adjust the time  
in one minute intervals by pressing the CHANNEL +/– buttons on the unit.  
Press DIAL TIMER to set the stop time.  
“STOP” and the next quarter hour increment appear alternately in the  
display window.  
52 Recording TV programs using the Dial Timer (SLV-D560P only)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turn DIAL TIMER to set the recording stop time.  
6
You can set the recording stop time in 15 minute intervals or adjust the time  
in one minute intervals by pressing the CHANNEL +/– buttons on the unit.  
Press DIAL TIMER.  
7
8
Current channel flashes in the display window.  
Turn DIAL TIMER to set the channel number.  
To record from a source connected to the LINE IN 1 or LINE-2 IN jacks,  
turn DIAL TIMER or press INPUT SELECT to display “L1” or “L2.”  
Press DIAL TIMER.  
9
Current tape speed flashes in the display window.  
Turn DIAL TIMER to set the tape speed.  
10  
11  
Press DIAL TIMER to complete the setting.  
“OK” appears in the display window for about five seconds.  
The timer indicator appears in the display window and the VCR stands by  
for recording. When using a cable box, leave it on.  
continued  
Recording TV programs using the Dial Timer (SLV-D560P only) 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To return to the previous step  
To return to the previous step, press the CHANNEL + and – buttons on the unit at the  
same time during any of the Dial Timer settings.  
To set the clock  
Hold down DIAL TIMER so that MONTH indicator appears in the display  
1 window. However, if the clock has already been set, the current setting appears.  
Turn DIAL TIMER to set the month.  
2
Press DIAL TIMER.  
3 DAY indicator appears in the display window.  
Turn and press DIAL TIMER to set the day and then the year.  
4 After you set the year, “AM” and “12:– –” appear alternately in the display  
window.  
Turn and press DIAL TIMER to set the hour and minute.  
5
6
When you have finished setting the time, press DIAL TIMER to start the clock.  
Tips  
To cancel a Dial Timer setting, press any button other than DIAL TIMER or CHANNEL +/–  
on the unit or any button on the remote while you are making the setting.  
To check, change, or cancel the program setting, see “Checking/changing/canceling timer  
Notes  
If eight programs have already been set using the VCR Plus+ system, DIAL TIMER or the  
manual timer setting, “FULL” appears in the display window for about five seconds in step 1.  
If you set the clock using the Auto Clock Set feature, the clock will adjust itself to the  
incoming time signal regardless of adjustments made with the Dial Timer. Be sure you have  
set Auto Clock Set correctly.  
If you are setting the clock for the first time or “0:– –” appears in the display window, you  
cannot set the clock to February 29th using the Dial Timer. Please use the Auto Clock Set  
feature to set the VCR to this day.  
The  
inserted.  
indicator flashes in the display window when you complete the setting with no tape  
When the setting time is incorrect, “Error” appears in the display window when you complete  
the timer setting. Set the timer again from step 1.  
54 Recording TV programs using the Dial Timer (SLV-D560P only)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
About the Demonstration Mode  
The Dial Timer function has a Demonstration Mode that allows the user, such as a  
salesperson, to enter more than eight examples of timer settings when demonstrating  
the use of the Dial Timer. It cancels the FULL notice which appears if eight  
programs have already been set. Do not use the Demonstration Mode for making  
timer recordings. Doing so may cause the settings to be inaccurate.  
To activate the Demonstration Mode  
Press X on the unit while turning the DIAL TIMER. “DEMO” appears in the display  
window for a few seconds.  
To cancel the Demonstration Mode  
Turn the power off and unplug the AC power cord. Although the Demonstration  
Mode is canceled, the timer settings entered while using the Demonstration Mode  
will remain. Be sure to manually cancel the timer settings before you use the Dial  
Timer or any other timer method after reconnecting the AC power cord (page 59).  
Recording TV programs using the Dial Timer (SLV-D560P only) 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Recording TV programs using the VCR  
Plus+® system (SLV-D560P only)  
Just enter the PlusCode number listed in the  
TV program guide. The date, time and  
channel number of that program are set  
automatically. You can preset up to eight  
programs together with the DIAL TIMER  
and manual timer settings at one time.  
VCR Plus+  
Before you start…  
Number  
buttons  
• Check that the DVD-VCR clock is set to  
the correct time.  
• Turn on the DVD-VCR and your TV.  
• Switch the input selector on your TV so  
that the signal from the player appears on  
the TV screen.  
• Set TV / DVD·VIDEO to DVD·VIDEO,  
then press SELECT VIDEO to control the  
• When using a cable box, turn it on.  
• Insert a tape with its safety tab in place.  
Make sure the tape is longer than the total  
recording time.  
V/v/B/b  
ENTER  
• If the DVD player is in play mode, you  
cannot display the setup menu. Stop the  
DVD playback.  
O RETURN  
Press VCR Plus+.  
VCR PLUS+  
1
B
Enter code  
with [0~9]  
Mode  
[ - - - - - - - - - ]  
V
[Once]  
[Auto]  
Speed  
V v  
ENTER RETURN SET UP  
Press V/v to select “Enter code.”  
2
Recording TV programs using the VCR Plus+® system (SLV-D560P only)  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Press the number buttons to enter the PlusCode  
number.  
VCR PLUS+  
3
B
Enter code  
with [0~9]  
Mode  
[012345678]  
V
[Once]  
[Auto]  
To correct a setting, press B to return to that  
setting and reset.  
Speed  
V v B  
ENTER RETURN SET UP  
~
Press V/v to select “Mode.”  
4
5
Press B/b to select the recording pattern:  
VCR PLUS+  
Enter code  
with [0~9]  
Mode  
[012345678]  
To record  
Select  
B
[Once]  
[Auto]  
Speed  
Only once  
Once  
Everyday Monday to Friday Mo~Fr  
V v B b  
ENTER RETURN SET UP  
Every Monday to Saturday  
Everyday  
Mo~Sa  
Daily  
Once a week  
Weekly  
Press V/v to select “Speed.”  
VCR PLUS+  
6
7
Enter code  
with [0~9]  
Mode  
[012345678]  
[Once]  
[Auto]  
B
Speed  
V v B b  
ENTER RETURN SET UP  
Press B/b to select the tape speed, Auto, SP, or  
EP, then press ENTER.  
CH START  
END  
10P 40P  
07  
DATE SPEED  
12/05 Auto  
02 07  
M
M
V v B b  
RETURN CLEAR  
To enter another setting, repeat steps 1 to 7.  
8
9
Press O RETURN to exit the menu.  
The timer indicator appears in the display window and the VCR stands by  
for recording. When using a cable box, leave it on.  
continued  
Recording TV programs using the VCR Plus+® system (SLV-D560P only)  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To stop recording  
To stop the VCR while recording, press x STOP.  
To use the DVD-VCR after setting the timer  
To use the DVD-VCR before a timer recording begins, just press ?/1. The timer  
indicator disappears from the display window and the DVD-VCR switches on.  
Remember to press ?/1 to reset the VCR to the timer recording standby mode after  
using the VCR.  
You can also do the following tasks while the VCR is recording:  
• Reset the counter (page 44).  
• Display tape information on the TV screen (page 46).  
• Check the timer settings (page 59).  
• Watch another TV program (page 47).  
Tip  
To check, change or cancel the program setting, see “Checking/changing/canceling timer  
Notes  
If the VCR does not accept the PlusCode number, this means that:  
– The PlusCode number is incorrect.  
– “Once,” “Daily,” “Mo~Sa,” “Mo~Fr” or “Weekly” was selected incorrectly. You cannot  
select “Daily,” “Mo~Sa,” “Mo~Fr” or “Weekly” for a program that airs more than seven  
days ahead.  
Correctly set the PlusCode number again from step 2.  
When the PlusCode number is incorrect, “Invalid code” will appear in the display.  
Recording TV programs using the VCR Plus+® system (SLV-D560P only)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58  
Checking/changing/canceling timer  
settings  
Before you start…  
CLEAR  
• Check that the DVD-VCR clock is set to  
the correct time.  
• Turn on the DVD-VCR and your TV.  
• Switch the input selector on your TV so  
that the signal from the player appears on  
the TV screen.  
SET UP  
TIMER  
• Set TV / DVD·VIDEO to DVD·VIDEO,  
then press SELECT VIDEO to control the  
• When using a decoder, turn it on.  
V/v/B/b  
ENTER  
• Insert a tape with its safety tab in place.  
Make sure the tape is longer than the total  
recording time.  
O RETURN  
• If the DVD player is in play mode, you  
cannot display the setup menu. Stop the  
DVD playback.  
Press SET UP, then press V/v to select  
CH START  
END  
DATE SPEED  
07 31P 1/20 SP  
1
2
01 05 31P  
M
M
03 01 31A  
03 32AMM 1/21 Auto  
(PROGRAM) and press ENTER. You can also  
display the timer programming menu by  
pressing TIMER.  
06 06 32P 08 32P  
1/21 EP  
M
M
The timer programming menu appears.  
V v B b  
RETURN  
Press V/v to select setting you want to change  
or cancel.  
CH START  
END  
DATE SPEED  
01 05 31P  
M
M
07 31P 1/20 SP  
03 01 31A  
03 32AMM 1/21 Auto  
06 06 32P 08 32P  
1/21 EP  
M
M
To change the setting, press B/b to select  
the item you want to change, and press V/v  
to change it.  
V v B b  
RETURN CLEAR  
To cancel the setting, press CLEAR.  
continued  
Checking/changing/canceling timer settings 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Press O RETURN to confirm the setting.  
3
Press O RETURN again to exit the menu.  
When the timer settings overlap  
The program that starts first has priority and the second program starts recording only  
after the first program has finished. If the programs start at the same time, the  
program listed first in the menu has priority.  
Program 1  
Program 2  
about 20 seconds  
will be cut off  
Program 1  
Program 2  
about 20 seconds will be cut off  
Tip  
If the indicator appears, the timer settings overlap.  
60 Checking/changing/canceling timer settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locking the DVD-VCR (Child Lock)  
After you have set the timer, you can lock all  
of the buttons on the DVD-VCR so that the  
settings are not canceled by mistake.  
?/1 POWER  
To lock the DVD-VCR  
When the DVD-VCR is turned on, hold down ?/1 POWER on the unit until “LOCK”  
appears in the display window. The DVD-VCR turns off and the indicator  
remains lit if there is a timer setting. The DVD-VCR will not work except for timer  
recordings.  
To unlock the DVD-VCR  
Hold down ?/1 POWER on the unit until “LOCK” disappears from the display  
window. The DVD-VCR is unlocked and turns on.  
To stop timer recording while the DVD-VCR is locked, press x. The recording stops  
and the DVD-VCR is unlocked.  
Note  
The DVD-VCR will be unlocked when:  
You stop timer recording by pressing x.  
You insert a tape.  
– The AC power cord is disconnected or power supply stops.  
Locking the DVD-VCR (Child Lock) 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced Hookups  
A/V Receiver hookup  
A Use this hookup if your A/V receiver has a Dolby* Surround (Pro  
Logic) decoder and 3 to 6 speakers  
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio  
or multi-channel audio (Dolby Digital) discs.  
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the  
double-D symbol are trademarks of Dolby Laboratories.  
DVD-VCR  
(red)  
Stereo audio cord  
(not supplied)  
(white)  
(white)  
to LINE OUT L/R (AUDIO)  
(red)  
l : Signal flow  
to audio input  
[Speakers]  
Rear (R)  
[Speakers]  
Front (L)  
Amplifier (receiver) with Dolby  
Surround decoder  
Rear (L)  
Front (R)  
Rear (mono)  
Subwoofer  
Center  
Note  
When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear  
speakers and a subwoofer.  
62 A/V Receiver hookup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
B Use this hookup if your A/V receiver has a Dolby Digital or DTS*  
decoder, a digital input jack and 6 speakers  
This connection will allow you to use the Dolby Digital or DTS decoder function of  
your AV amplifier (receiver). You are not able to enjoy the surround sound effects of  
B-1  
B-2  
this player. You must make connections using  
and  
.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.  
DVD-VCR  
1
Coaxial digital  
cord (not supplied)  
Stereo audio  
cord (not  
(red)  
supplied)  
and  
or  
to DIGITAL AUDIO OUT  
(COAXIAL or OPTICAL)  
(white)  
Optical digital cord  
(not supplied)  
to LINE OUT L/R (AUDIO)  
Remove jack cap  
before connecting  
(red)  
(white)  
l : Signal flow  
to coaxial or optical  
digital input  
to audio input  
[Speakers]  
[Speakers]  
AV amplifier (receiver) having  
a decoder  
Rear (L)  
Subwoofer  
Front (L)  
Center  
Rear (R)  
Front (R)  
Note  
After you have completed the connection, be sure to set “Dolby Digital” to “Dolby Digital”  
and “DTS” to “On” in “AUDIO SETUP” menu (page 66). Otherwise, no sound or a loud  
noise will come from the speakers.  
A/V Receiver hookup 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
S-Video/Component Video hookup  
Make audio connections using the LINE OUT AUDIO L/R jacks or DIGITAL AUDIO OUT  
(OPTICAL or COAXIAL) jacks on the right side of the DVD-VCR when you use S-VIDEO/  
Component Video hookup.  
A Use this hookup if your TV has an S-VIDEO input jack  
Connect an S-VIDEO cord (not supplied). You will enjoy high quality images.  
DVD-VCR  
TV  
l : Signal flow  
(DVD only)  
or  
or  
Audio cord  
(not supplied)  
Coaxial  
digital cord  
(not supplied)  
Optical digital  
cord (not  
supplied)  
S-VIDEO cord  
(not supplied)  
Remove jack  
cap before  
connecting  
to audio  
input  
to coaxial or optical  
digital input  
TV or AV amplifier  
Notes  
The connection using S-VIDEO OUT jack is only for the DVD player.  
If you set “Progressive” to “On” in the “SCREEN SETUP” menu, S-Video playback may be  
distorted.  
64 S-Video/Component Video hookup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
B Use this hookup if your TV has component video input jacks  
Connect your TV via the COMPONENT VIDEO OUT jacks using a component  
video cord (not supplied) or three video cords (not supplied) of the same kind and  
length. You will enjoy accurate color reproduction and high quality images.  
See page 62 for audio connections.  
DVD-VCR  
(blue) (red)  
(green)  
TV  
Component video cord  
(green)  
(not supplied)  
(blue)  
(red)  
l : Signal flow  
(DVD only)  
If your TV accepts progressive (480p) format signals, you must use this connection  
and then set “Progressive” to “On” in the “SCREEN SETUP” menu (page 70). The  
PROGRESSIVE indicator lights up in orange when the DVD player outputs  
progressive signals.  
PROGRESSIVE indicator  
Notes  
The connection using COMPONENT VIDEO OUT jack is only for the DVD player.  
Consumers should note that not all high definition television sets are fully compatible with  
this product and may cause artifacts to be displayed in the picture. In case of 480 progressive  
scan picture problems, it is recommended that the user switch the connection to the  
standard definitionoutput. If there are questions regarding our TV set compatibility with  
this model 480p DVD player, please contact our customer service center.  
S-Video/Component Video hookup 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
DVD Settings and Adjustments  
Audio Setup  
“Audio Setup” allows you to set the sound  
according to the playback and connection  
conditions.  
SET UP  
V/v/B/b  
ENTER  
Press SET UP when the DVD player is in stop  
DVD SETUP  
1
mode, then press V/v to select  
(DVD),  
Language Setup  
Audio Setup  
Screen Setup  
Parental Setup:  
then press ENTER.  
V v  
ENTER RETURN SET UP  
Press V/v to select “Audio Setup,” then press  
AUDIO SETUP  
2
3
ENTER.  
Dolby Digital  
DTS  
[ D-PCM ]  
[ Off ]  
[ Standard ]  
Audio DRC  
V v B b  
RETURN SET UP  
Press V/v to select the setup item from the displayed list:  
“Dolby Digital,” “DTS” or “Audio DRC.”  
66 Audio Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Press B/b to select an item.  
4
5
Press SET UP to exit the menu.  
Menu choices  
• Dolby Digital  
Selects the type of Dolby Digital signal.  
The default setting is indicated in bold print.  
D-PCM  
Select this when the player is connected to an audio component  
lacking a built-in Dolby Digital decoder.  
Dolby Digital  
Select this when the player is connected to an audio component  
with a built-in Dolby Digital decoder.  
• DTS  
Selects whether or not to output DTS signals.  
The default setting is indicated in bold print.  
Off  
Select this when the player is connected to an audio component  
lacking a built-in DTS decoder.  
On  
Select this when the player is connected to an audio component  
with a built-in DTS decoder.  
• Audio DRC (Dynamic Range Control)  
Makes the sound clear when the volume is turned down when playing a DVD that  
conforms to “Audio DRC.” This affects the output from the following jacks:  
– LINE OUT AUDIO L/R jacks  
– DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when “Dolby  
Digital” is set to “D-PCM”.  
The default setting is indicated in bold print.  
Standard  
Normally select this positon.  
Wide Range  
Gives you the feeling of being at alive performance.  
Notes  
If you select the surround setting while playing a DVD, the player does not output Dolby  
Digital signals from the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack (when you  
set “Dolby Digital” to “D-PCM” in “AUDIO SETUP” menu).  
If you connect a component that does not conform to the selected audio signal, a loud noise  
(or no sound) will come out from the speakers, affecting your ears or causing the speakers to  
be damaged.  
Noise may occur in the LinearPCM double-speed audio. This is not a malfunction.  
If you set “DTS” to “On,” you cannot select surround setting (page 88).  
You cannot perform DTS audio output during playback quickly or slowly with sound (page 36).  
Audio Setup 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Screen Setup  
“Screen Setup” allows you to set the screen  
according to the playback and connection  
conditions.  
SET UP  
V/v/B/b  
ENTER  
O RETURN  
Press SET UP when the DVD player is in stop  
DVD SETUP  
1
mode, then press V/v to select  
(DVD),  
Language Setup  
Audio Setup  
Screen Setup  
Parental Setup:  
then press ENTER.  
V v  
ENTER RETURN SET UP  
Press V/v to select “Screen Setup,” then press  
SCREEN SETUP  
2
3
ENTER.  
[
]
TV Type  
Black Level  
Progressive  
4:3 Letter Box  
[
[
]
]
Off  
Off  
V v B b  
RETURN SET UP  
Press V/v to select the setup item from the displayed list:  
“TV Type,” or “Black Level.”  
To set the “Progressive” setting, see page 70.  
68 Screen Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Press B/b to select an item.  
4
5
Press SET UP to exit the menu.  
Menu choices  
• TV Type  
Selects the aspect ratio of the connected TV (4:3 standard or wide).  
The default setting is indicated in bold print.  
4:3 Letter Box  
Select this when you connect a 4:3 screen TV. Displays a wide  
picture with bands on the upper and lower portions of the screen.  
4:3 Pan Scan  
Select this when you connect a 4:3 screen TV. Automatically  
displays the wide picture on the entire screen and cuts off the  
portions that do not fit.  
16:9  
Select this when you connect a wide-screen TV or a TV with a wide  
mode function.  
4:3 Letter Box  
4:3 Pan Scan  
16:9  
• Black Level  
You can enhance the black level by increasing the brightness and contrast when  
viewing DVD VIDEOs with the PROGRESSIVE indicator turned off.  
The default setting is indicated in bold print.  
Off  
Stops the increase of the contrast.  
Increases the contrast.  
On  
Notes  
Playback settings stored in the disc take priority over the “DVD SETUP” menu settings and  
not all the functions described may work.  
Depending on the DVD VIDEO, “4:3 Letter Box” may be selected automatically instead of  
“4:3 Pan Scan” or vice versa.  
continued  
Screen Setup 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
To set the “Progressive” setting  
If your TV accepts progressive (480p) format signals, you will enjoy accurate color  
reproduction and high quality image.  
Follow step 1 and 2 on page 68, then press V/v to  
SCREEN SETUP  
1 select “Progressive.”  
[
]
TV Type  
Black Level  
Progressive  
4:3 Letter Box  
[
[
]
]
Off  
Off  
V v B b  
RETURN SET UP  
SCREEN SETUP  
Press B/b to select “On,” then press ENTER.  
2
3
[
]
TV Type  
Black Level  
Progressive  
4:3 Letter Box  
[
[
]
]
Off  
On  
V v B b  
ENTER RETURN SET UP  
SCREEN SETUP  
Follow the instructions appearing on the screen.  
Progressive Scan Output  
1) Ensure your TV is (480P) Progressive  
Scan capable.  
2) Connect with Component Video Output  
jacks. (red/green/blue connections)  
3) Select [OK] to test your video signal.  
4) If video signal appears OK,  
video connection is complete.  
1 Ensure your TV is (480p) Progressive Scan  
capable.  
OK  
CANCEL  
2 Connect with Component Video Output jacks  
(red/green/blue connections).  
B b  
ENTER RETURN SET UP  
SCREEN SETUP  
3 Press B/b to select [OK] to test your video  
TEST SCREEN  
signal.  
If video signal appears OK, video connection is  
SCREEN SETUP  
4 complete. Press ENTER.  
If picture is OK, press [ENTER] key.  
If picture is distorted, press [RETURN] key.  
To Deactivate  
The PROGRESSIVE indicator on the unit lights up  
in orange.  
Press [PAUSE] on the unit for 5 seconds.  
If picture is distorted, press O RETURN.  
ENTER  
RETURN  
Check the connection (page 65).  
Press SET UP to exit the menu.  
SCREEN SETUP  
5
[
]
TV Type  
Black Level  
Progressive  
4:3 Letter Box  
[
[
]
]
Off  
On  
V v B b  
RETURN SET UP  
70 Screen Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Tip  
The “Progressive” setting can be canceled by pressing X on the unit continuously for 5  
seconds or more, or selecting “Off” in step 2.  
Note  
If you select progressive signal when you connect the DVD player to a TV that cannot accept  
the signal in progressive format, the image quality will deteriorate. In this case, set  
“Progressive” to “Off”.  
Screen Setup 71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the display or sound track  
language  
You can set various languages for the disc’s  
menu, sound track or subtitle.  
SET UP  
V/v/B/b  
ENTER  
Press SET UP when the DVD player is in stop  
DVD SETUP  
1
mode, then press V/v to select  
(DVD) and  
Language Setup  
Audio Setup  
Screen Setup  
Parental Setup:  
press ENTER.  
V v  
ENTER RETURN SET UP  
Press V/v to select “Language Setup,” then  
LANGUAGE SETUP  
2
press ENTER.  
DVD Menu  
Audio  
Subtitle  
: English  
: Original  
: Audio Follow  
The “LANGUAGE SET UP” menu appears.  
V v  
ENTER RETURN SET UP  
72 Setting the display or sound track language  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Press V/v to select the language setup item from the displayed list:  
“DVD Menu,” “Audio,” or “Subtitle.”  
Then press ENTER.  
3
4
Press V/v to select the desired language, then press ENTER.  
• DVD MENU LANGUAGE  
DVD MENU LANGUAGE  
You can select the desired language for the  
disc’s menu.  
B
English  
Français  
Deutsch  
Español  
Italiano  
DVD Menu  
Nederlands  
Others  
V v  
ENTER RETURN SET UP  
• AUDIO LANGUAGE  
AUDIO LANGUAGE  
English  
Switches the language of the sound track.  
When you select “Original,” the language  
given priority in the disc is selected.  
Français  
Deutsch  
Español  
Italiano  
Audio  
Nederlands  
B
Original  
Others  
V v  
ENTER RETURN SET UP  
• SUBTITLE LANGUAGE  
SUBTITLE LANGUAGE  
B
Audio Follow  
English  
Switches the language of the subtitle  
recorded on the DVD VIDEO.  
When you select “Audio Follow,” the  
language for the subtitle changes according  
to the language you selected for the sound  
track.  
Français  
Deutsch  
Español  
Italiano  
Nederlands  
Others  
Subtitle  
V v  
ENTER RETURN SET UP  
Press SET UP to exit the menu.  
5
Tip  
If you select “Others” in step 4, an additional language menu  
appears. Press V/v/B/b to select the desired language,  
then press ENTER.  
DVD MENU LANGUAGE  
Cesky  
Dansk  
Magyar  
Svenska  
Norsk  
Português  
Suomi  
Hindi  
Japanese  
Russian  
Turkish  
Thai  
Afrikaans  
Arabic  
Chinese  
Greek  
Polski  
Korean  
V v B b  
ENTER RETURN SET UP  
Notes  
When you select a language that is not recorded on the DVD  
VIDEO in step 4, one of the recorded languages will be automatically selected.  
Playback settings stored in the disc take priority over the DVD SETUP settings and not all the  
functions described may work.  
Setting the display or sound track language 73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental Control (limiting playback by children)  
Playback of some DVD VIDEOs can be  
limited according to a predetermined level  
such as the age of the users. The “Parental  
Control” function allows you to set a  
playback limitation level.  
Number  
buttons  
SET UP  
H PLAY  
V/v/B/b  
ENTER  
Press SET UP when the DVD player is in stop  
DVD SETUP  
1
mode, then press V/v to select  
(DVD) and  
Language Setup  
Audio Setup  
Screen Setup  
Parental Setup:  
press ENTER.  
V v  
ENTER RETURN SET UP  
Press V/v to select “Parental Setup,” then  
press ENTER.  
PARENTAL SETUP  
2
Use Password  
[ No ]  
B b  
RETURN SET UP  
74 Parental Control (limiting playback by children)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Press b to set the parental control.  
3
• If you have not entered a password  
The display for registering a new password  
CREATE PASSWORD  
Enter Password  
appears.  
Enter a 4-digit password using the number  
buttons.  
-~  
9
RETURN  
The display for confirming the password  
appears.  
Re-enter the password.  
CREATE PASSWORD  
Re-enter Password  
-~  
9
RETURN  
• When you have already registered a  
password  
PASSWORD CHECK  
Enter Password  
The display for entering the password appears.  
Enter a 4-digit password using the number  
buttons.  
After registering a password, if you set Use  
Password” to “No,” “PASSWORD CHECK”  
screen will not appear.  
-~9  
RETURN  
PARENTAL SETUP  
[ Yes ]  
:1  
Use Password  
Rating Level  
Change Password  
V v B b  
RETURN SET UP  
RATING LEVEL  
Press V/v to select “Rating Level,” then press  
4
5
ENTER.  
Level 8 Adult  
Level 7  
Level 6  
Level 5  
Level 4  
Level 3  
Level 2  
Level 1 Kids Safe  
V v  
ENTER RETURN SET UP  
Press V/v to select the level you want, then  
press ENTER.  
RATING LEVEL  
Level 8 Adult  
Level 7  
Level 6  
The options are as follows.  
Level 5  
Level 4  
Level 3  
Level 2  
Level 8 (Adult) y Level 7 y Level 6 y  
Level 5 y Level 4 y Level 3 y Level 2  
y Level 1 (Kids Safe)  
Level 1 Kids Safe  
V v  
ENTER RETURN SET UP  
The lower the value, the stricter the limitation.  
continued  
Parental Control (limiting playback by children) 75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Press SET UP to exit the menu.  
6
To change the password  
Select “Change Password” in step 4 on page 75.  
1 The display for entering a new password appears.  
Enter a new 4-digit password using the number buttons.  
2 The display for confirming the password appears.  
Re-enter the new password.  
3
To turn off the Parental Control function  
Set “Use Password” to “No” in step 3 on page 75.  
To play a disc for which Parental Control is set  
Insert the disc, then press H PLAY.  
1 The display for entering your password appears.  
Enter your 4-digit password using the number buttons.  
2 The player starts playback.  
If you forget your password  
Turn on the DVD-VCR.  
1
2
Remove the disc and close the disc tray.  
Hold down m and M on the front panel simultaneously for 5 seconds.  
3 “Reset OK” appears on the screen.  
Turn off the DVD-VCR.  
4 The password is cleared.  
To create a new password, follow step 3 on page 75.  
5
Notes  
When you play DVD VIDEOs which do not have the Parental Control function, playback  
cannot be limited on this player.  
All the ratings higher than the level you select will be blocked.  
Write your password down and keep it in a safe place in case you forget it.  
76 Parental Control (limiting playback by children)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Additional Operations  
Using the DVD’s menu  
A DVD is divided into long sections of a  
picture or a music feature called “titles.”  
When you play a DVD VIDEO which  
contains several titles, you can select the title  
you want using the TOP MENU button.  
When you play DVD VIDEOs that allow you  
to select items such as the language for the  
subtitles and the language for the sound,  
select these items using the MENU button.  
Number  
buttons  
x STOP  
V/v/B/b  
ENTER  
MENU  
TOP  
MENU  
Press TOP MENU or MENU.  
1
The disc’s menu appears on the TV screen.  
The contents of the menu vary from disc to disc.  
continued  
Using the DVD’s menu 77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Press V/v/B/b to select the item you want to play or change, then press  
2
ENTER.  
You can also use the number buttons to select the item.  
Note  
Depending on the DVD VIDEO, you may not be able to use the TOP MENU button or search  
a point by setting the time.  
78 Using the DVD’s menu  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Zooming into a scene  
You can zoom into a scene during playback  
or still mode. To zoom into a JPEG image,  
ZOOM  
V/v/B/b  
ENTER  
Press ZOOM.  
1
” appears.  
Press V/v/B/b to move “ ” to the position where you want to zoom in.  
2
3
Press ENTER repeatedly to change the magnification.  
Each time you press the button, the magnification changes as shown below.  
2× t 4× t 2× t normal magnification  
Notes  
You cannot use 4× magnification when you play VIDEO CDs.  
The zoom function may not work depending on the DVD.  
Zooming into a scene 79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Changing the angles  
If various angles (multi-angles) for a scene  
are recorded on the DVD VIDEO, “  
appears in the display window. This means  
that you can change the viewing angle.  
ANGLE  
B/b  
Press ANGLE during playback.  
B
b
1
2
The angle number appears on the display.  
The number after the slash indicates the total  
number of angles.  
Press B/b repeatedly to select the angle number.  
The scene changes to the selected angle.  
Note  
Depending on the DVD VIDEO, you may not be able to change the angles even if multi-  
angles are recorded on the DVD VIDEO.  
80 Changing the angles  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Displaying the subtitle  
If subtitles are recorded on the disc, you can  
change the subtitles or turn them on and off  
whenever you want while playing a DVD.  
SUBTITLE  
V/v/B/b  
Press SUBTITLE during playback.  
B
b
V
v
1
Press B/b repeatedly to select the language.  
2
Depending on the DVD, the choice of language varies.  
of the language.  
Press V/v repeatedly to select “On.”  
3
To turn off the subtitles  
Select “Off” in step 3.  
Note  
Depending on the DVD, you may not be able to change the subtitles even if multilingual  
subtitles are recorded on it. You also may not be able to turn them off.  
Displaying the subtitle 81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Various play mode functions (Program play,  
Shuffle play, Repeat play)  
You can set the following play modes:  
• Program play (page 82), Program play MP3 audio tracks (page 92)  
• Shuffle play (page 84), Shuffle play MP3 audio tracks (page 93)  
• Repeat play (page 85)  
Note  
The play mode is canceled when:  
– you open the disc tray  
– the player enters standby mode by pressing [/1.  
Creating your own program (Program play)  
You can play the contents of a disc in the  
order you want by arranging the order of the  
tracks on the disc to create your own  
CLEAR  
REPEAT  
program. You can program up to 20 tracks.  
To program MP3 audio tracks, see page 92.  
H PLAY  
V/v/B/b  
ENTER  
Press REPEAT when the DVD player is in stop  
mode.  
1
PROGRAM SHUFFLE  
82 Various play mode functions (Program play, Shuffle play, Repeat play)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Press B/b to select “PROGRAM”, then press  
PROGRAM  
Track  
01 02 03 04  
05 06 07 08  
09 10 11 12  
13 14 15 16  
17 18 19 20B  
Clear last track  
2
3
ENTER.  
Program Order  
–– –– –– ––  
–– –– –– ––  
–– –– –– ––  
–– –– –– ––  
–– –– –– ––  
Clear all tracks  
V
v
B
b
ENTER RETURN CLEAR  
Press V/v/B/b to select the track number you  
want to program, then press ENTER.  
PROGRAM  
Track  
01 02 03 04  
05 06 07 08  
09 10 11 12  
13 14 15 16  
17 18 19 20B  
Clear last track  
Program Order  
01 –– –– ––  
–– –– –– ––  
–– –– –– ––  
–– –– –– ––  
–– –– –– ––  
Clear all tracks  
V
v
B
b
ENTER RETURN CLEAR  
To program other tracks, repeat step 3.  
4
5
The programmed track numbers are displayed in the selected order.  
Press H PLAY to start program play.  
Program play starts.  
When the program ends, you can restart the same program again by  
pressing H PLAY.  
To stop program play  
Press CLEAR until “Off” appears at the upper left top of the TV screen during  
programme play.  
To change or cancel a program  
Follow steps 1 and 2 of “Creating your own program (Program play).”  
1
Press v repeatedly to select “Clear last track,” then press ENTER. Each time you  
2 press the button, the last programmed number is canceled. You can also cancel  
the last programmed number by pressing CLEAR.  
Follow step 3 for new programming.  
3
To cancel all the programmed numbers  
Follow steps 1 and 2 of “Creating your own program (Program play).”  
1
Press v repeatedly to select “Clear last track,” then press b to select “Clear all  
2 tracks” and press ENTER.  
All the programmed numbers are canceled.  
Notes  
Up to 99 tracks can be displayed.  
Up to 20 tracks can be programmed at one time.  
continued  
Various play mode functions (Program play, Shuffle play, Repeat play) 83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Playing in random order (Shuffle play)  
You can shuffle the playback order of tracks.  
Subsequent “shuffling” may produce a  
different playing order.  
CLEAR  
REPEAT  
To shuffle MP3 audio tracks, see page 93.  
B/b  
ENTER  
Press REPEAT when the DVD player is in stop  
mode.  
1
PROGRAM SHUFFLE  
Press B/b to select “SHUFFLE”, then press  
ENTER.  
2
PROGRAM SHUFFLE  
To return to normal play  
Press CLEAR until “Off” appears at the upper left top of the TV screen during shuffle  
play.  
Tips  
Shuffle play will stop when all the tracks are played back.  
You cannot repeat play while in shuffle play.  
84 Various play mode functions (Program play, Shuffle play, Repeat play)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Playing repeatedly (Repeat play)  
You can play all of the titles or tracks on a  
disc or a single title, chapter, or track  
repeatedly.  
CLEAR  
REPEAT  
B/b  
Press REPEAT during playback.  
Off  
1
Press REPEAT or B/b repeatedly to select the item to be repeated.  
2
When playing a DVD  
• Chapter: repeats the current chapter.  
• Title: repeats the current title on a disc.  
When playing a VIDEO CD (with PBC function off) or CD  
• Track: repeats the current track.  
• Disc: repeats all of the tracks.  
When playing a DATA CD/DATA DVD (MP3 audio)  
• FILE: repeats the current track (file).  
• DIR: repeats the current album (directory).  
• DISC: repeats the current disc.  
continued  
Various play mode functions (Program play, Shuffle play, Repeat play) 85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
To return to normal play  
Select “Off” in step 2 or press CLEAR during repeat play.  
Tip  
When you press x STOP during repeat play, repeat play is canceled.  
Notes  
You cannot repeat play with DVD-RW in VR mode.  
You cannot repeat play VIDEO CDs with PBC function on. See “Playing VIDEO CDs with  
You cannot repeat play while in program play.  
86 Various play mode functions (Program play, Shuffle play, Repeat play)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the sound  
When playing a DVD recorded in multiple  
audio formats (PCM, Dolby Digital, or  
DTS), you can change the audio format. If  
the DVD is recorded with multilingual  
tracks, you can also select the language.  
AUDIO  
With CDs or VIDEO CDs, you can select the  
sound from the right or left channel and listen  
to the sound of the selected channel through  
both the right and left speakers. For  
example, when playing a Karaoke VIDEO  
CD containing a song with the vocals on the  
right channel and the instruments on the left  
channel, you can hear the instruments from  
both speakers by selecting the left channel.  
B/b  
Playback  
Disc type  
instruments only  
Karaoke VIDEO CD Yes  
Karaoke DVD  
No  
To enjoy Dolby Digital or DTS effect from a  
LinearPCM format disc, you have to make  
B-2  
the  
connection as shown on page 63.  
Press AUDIO during playback.  
B
b
ENG DOLBY DIGITAL 3/2.1CH 1/2  
1
Press B/b repeatedly to select the desired language/audio setting.  
2
• When playing a DVD  
Depending on the DVD, the choice of language varies.  
abbreviation of the language.  
• When playing a VIDEO CD or CD  
The default setting is indicated in bold print.  
Stereo  
Left  
The standard stereo sound  
The sound of the left channel (monaural)  
The sound of the right channel (monaural)  
Right  
Changing the sound 87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Virtual surround setting  
When you connect a stereo TV or 2 front  
speakers, SURROUND lets you enjoy surround  
sound effects by using sound imaging to create  
virtual rear speakers from the sound of the front  
speakers without using actual rear speakers.  
SURROUND  
B/b  
Press SURROUND during playback.  
Off  
1
Press B/b repeatedly to select “Surround1,” “Surround2,” “Surround3.”  
2
Surround effect increases as shown below.  
Surround1  
Surround2  
Surround3  
TV  
TV  
TV  
: Virtual speaker  
88 Virtual surround setting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
To cancel the setting  
Select “Off” in step 2.  
Notes  
When the playing signal does not contain a signal for the rear speakers, the surround effects  
will be difficult to hear.  
When you activate the surround effect, turn off the surround setting of the connected TV or  
amplifier (receiver).  
Make sure that your listening position is between and at an equal distance from your  
speakers, and that the speakers are located in similar surroundings.  
If you use the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack and set “Dolby  
Digital” to “Dolby Digital” or “DTS” to “On” in “AUDIO SETUP” menu (page 66), sound  
will come from your speakers but it will not have the surround effect.  
You cannot perform playback quickly or slowly with sound when a virtual surround effect is  
Virtual surround setting 89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing an MP3 audio track  
You can play back DATA CDs (CD-ROMs/  
CD-Rs/CD-RWs) or DATA DVDs (DVD-  
ROMs/DVD+RWs/DVD+Rs/DVD-RWs/  
DVD-Rs) recorded in MP3 (MPEG1 Audio  
Layer 3) format.  
Z
REPEAT  
H PLAY  
x STOP  
V/v/B/b  
ENTER  
O RETURN  
TOP MENU  
Press Z and place a DATA CD or DATA DVD  
on the disc tray, then press Z to close the tray.  
1
Select a Media Type  
1
2
MP3  
JPEG  
When you load a DATA CD or DATA DVD  
which contains MP3 audio tracks and JPEG  
image files, “Select a Media Type” menu  
appears.  
V v  
ENTER  
If you load a DATA CD or DATA DVD which  
contains only MP3 audio files, the MP3 display appears. Then you can skip  
step 2.  
90 Playing an MP3 audio track  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Press V/v to select “MP3”, then press  
Repeat mode  
Elapsed playing time  
2
ENTER.  
The first track starts playing. Press x STOP if  
necessary.  
MP3  
track 1  
STOP  
OFF  
00:00  
FILES:014  
DIRECTORY:007  
album 1  
mp3  
mp3  
mp3  
mp3  
mp3  
mp3  
mp3  
mp3  
mp3  
mp3  
track 1  
track 2  
track 3  
track 4  
track 5  
track 6  
track 7  
track 8  
track 9  
track 10  
album 2  
album 3  
album 4  
album 5  
album 6  
album 7  
V v B b  
SET UP  
ENTER RETURN  
Press O RETURN, then press V/v to select  
the desired directory in the left column, then  
press ENTER.  
MP3  
track 1  
STOP  
OFF  
3
4
00:00  
FILES:014  
DIRECTORY:007  
album 1  
mp3  
mp3  
mp3  
mp3  
mp3  
mp3  
mp3  
mp3  
mp3  
mp3  
track 1  
track 2  
track 3  
track 4  
track 5  
track 6  
track 7  
track 8  
track 9  
track 10  
album 2  
album 3  
album 4  
album 5  
album 6  
album 7  
V v B b  
SET UP  
ENTER RETURN  
Press V/v to select the desired track in the  
right column, then press ENTER.  
MP3  
track 5  
PLAY  
OFF  
00:01  
FILES:014  
DIRECTORY:007  
album 1  
mp3  
mp3  
mp3  
mp3  
mp3  
mp3  
mp3  
mp3  
mp3  
mp3  
track 1  
track 2  
track 3  
track 4  
track 5  
track 6  
track 7  
track 8  
track 9  
track 10  
album 2  
album 3  
The selected track starts playing.  
album 4  
album 5  
album 6  
album 7  
When a track or album is being played, the title  
is shown in a box. The playing track number  
appears on the display window.  
V v B b  
ENTER RETURN  
To stop play  
Press x STOP.  
To repeat play  
Press REPEAT repeatedly during playback to change the repeat mode.  
• FILE: repeats the current track (file).  
• DIR: repeats the current album (directory).  
• DISC: repeats the current disc.  
To go to the next or previous page  
Press b or B.  
To return to the previous display  
Press O RETURN.  
To return to the “Select a Media Type” menu  
Press x STOP twice, then press TOP MENU.  
To turn off the display  
Press x STOP twice, then press O RETURN repeatedly.  
continued  
Playing an MP3 audio track 91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Notes  
Only the letters in the alphabet and numbers can be used for album or track names. Anything  
else is displayed as an asterisk.  
Up to 12 alphanumeric characters can be displayed for album or track names.  
ID3 tags cannot be displayed.  
To program MP3 audio tracks  
Press x STOP twice, then press REPEAT.  
1
PROGRAM SHUFFLE  
Press B/b to select “PROGRAM,” then press  
PROGRAM  
2 ENTER.  
00:00  
ORDER:000  
OFF  
DIRECTORY:007  
album 1  
album 2  
album 3  
album 4  
album 5  
album 6  
album 7  
V v  
CLEAR  
OFF  
ENTER RETURN  
PROGRAM  
Press V/v to select the desired directory in the left  
00:00  
3 column, then press ENTER.  
DIRECTORY:003  
ORDER:000  
mp3  
mp3  
mp3  
mp3  
mp3  
track 1  
track 2  
track 3  
track 4  
track 5  
V v  
CLEAR  
OFF  
ENTER RETURN  
Press V/v to select the track you want to program,  
PROGRAM  
4 then press ENTER.  
00:00  
DIRECTORY:003  
ORDER:001  
mp3  
mp3  
mp3  
mp3  
mp3  
track 1  
track 2  
track 3  
track 4  
track 5  
mp track 3  
3
V v  
CLEAR  
ENTER RETURN  
To program other tracks, repeat step 4.  
5
The programmed tracks are displayed in the selected  
order. Press CLEAR to cancel the last programmed  
track.  
Press H PLAY to start program play.  
6
Program play starts. When the program ends, you  
can restart the same program again by pressing  
H PLAY.  
To stop program play  
Press x STOP during program play.  
Note  
Up to 20 tracks can be programmed at one time.  
92 Playing an MP3 audio track  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To return to normal play  
Press CLEAR during program play.  
Tip  
You cannot repeat play while in program play.  
To shuffle MP3 audio tracks  
Press REPEAT when the MP3 is in stop mode.  
1
2
PROGRAM SHUFFLE  
Press B/b to select “SHUFFLE,” then press ENTER.  
To return to normal play  
Press CLEAR during shuffle play.  
Tips  
Shuffle play will stop when all the tracks are played back.  
You cannot repeat play while in shuffle play.  
About MP3 audio tracks  
You can play back DATA CDs (CD-ROMs/CD-Rs/CD-RWs) or DATA DVDs  
(DVD-ROMs/DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs) recorded in MP3 (MPEG-  
1 Audio Layer III) format. However, the discs must be recorded according to  
ISO9660 Level 1/Level 2 or Joliet format and DATA DVDs of Universal Disk Format  
(UDF) for the player to recognize the tracks (or files). You can also play DATA CDs  
or DATA DVDs recorded in Multi Session or Multi Border (see “Note on Multi  
Refer to the instructions supplied with the CD-R/CD-RW/DVD-R/DVD-RW drives  
and the recording software (not supplied) for details on the recording format.  
Note on Multi Session/Border discs  
If MP3 audio tracks are recorded in the first session/border, the player will also play  
MP3 audio tracks in other session/border. If audio tracks and images in Music CD  
format or Video CD format are recorded in the first session/border, only the first  
session/border will be played back.  
Notes  
If you put the extension “.MP3” to data not in MP3 format, the player cannot recognize the  
data properly and will generate a loud noise which could damage your speaker system.  
The player cannot play audio tracks in MP3PRO format.  
The player may not be able to play some DATA CDs/DATA DVDs created in the Packet  
Write format.  
If both video data and MP3 audio tracks exist on a DATA DVD, the player recognizes only  
the video data.  
This player supports MP3 audio tracks recorded with a bit rate of 128 kbps and a sampling  
frequency of 44.1 kHz. Attempting to play MP3 audio tracks recorded with different  
specifications may result in loud noise, sound skipping or speaker damage.  
Depending on the disc contents, playback may take some time to start.  
continued  
Playing an MP3 audio track 93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
The Playback order of MP3 audio tracks  
The playback order of albums and tracks recorded on a DATA CD or DATA DVD is  
as follows.  
• Structure of disc contents  
Tree 1 Tree 2 Tree 3 Tree 4 Tree 5  
album  
track  
When you insert a DATA CD or DATA DVD and press H PLAY, the numbered  
tracks are played sequentially, from 1 through 7. Any sub-albums/tracks contained  
within a currently selected album does not take priority over the next album in the  
same tree. (Example: E contains G but 6 is played before 7.)  
When you press O RETURN and the list of MP3 albums appears (page 91), the  
albums are arranged in the following order: A t B t D t E t F t G.  
Albums that do not contain tracks (such as album C) do not appear in the list.  
Tips  
If you add numbers (01, 02, 03, etc.) to the front of the track file names, the tracks will be  
played in that order.  
A disc with many trees takes longer to start playback. Some discs with many trees cannot be  
played back.  
Notes  
Depending on the software you use to create the DATA CD or DATA DVD, the playback  
order may differ from the illustration above.  
The playback order above may not be applicable if there are more than a total of 1000 albums  
and tracks in the DATA CD or DATA DVD.  
A total of up to 999 files can be recognized for discs that contain both MP3 and JPEG files.  
Files are recognized in the order that they were recorded. For example, if 990 JPEG files are  
recorded then 100 MP3 files are recorded, the 990 JPEG files recorded first and only the first  
9 MP3 files can be recognized.  
Depending on the disc contents, playback may take some time to start.  
94 Playing an MP3 audio track  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing JPEG image files  
You can play JPEG image files on DATA CDs  
(CD-ROMs/CD-Rs/CD-RWs) or DATA DVDs  
(DVD-ROMs/DVD+RWs/DVD+Rs/DVD-  
RWs/DVD-Rs).  
Z
./ >  
H PLAY  
x STOP  
V/v/B/b  
ENTER  
MENU  
TOP MENU  
DISPLAY  
Press Z and place a DATA CD or DATA DVD  
on the disc tray, then press Z to close the tray.  
1
Select a Media Type  
1
2
MP3  
JPEG  
When you load a DATA CD or DATA DVD  
which contains MP3 audio tracks and JPEG  
image files, “Select a Media Type” menu  
appears.  
V v  
ENTER  
If you load a DATA CD or DATA DVD which  
contains only JPEG image files, the “Album” display appears. Then you  
can skip step 2.  
continued  
Playing JPEG image files 95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Press V/v to select “JPEG”, then press  
Album  
Photo:  
2
3
ENTER.  
The “Album” display will appears.  
If you do not press ENTER after selecting a  
media type, the selected media will be  
automatically played.  
SLIDE SHOW  
Press ./> to select the next/previous album page, then press V/v/  
B/b to select an image in the “Album” display.  
To display the selected image  
1
Press ENTER.  
The selected image number appears in the  
IMAGE  
display window.  
2
To display the next/previous image, press  
./>.  
To play the Slide show  
: Fast  
: Normal  
: Slow  
1
Press H PLAY.  
You can also play the Slide show using the  
menu on the selected image.  
Interval  
2
Press B/b to select the desired playing  
speed on the “Interval” menu, then press  
ENTER.  
IMAGE  
Slide show starts from the selected image.  
To rotate the selected image  
Press V/v/B/b to select an image in the “Album”  
1 display, then press ENTER.  
Press B/b to select “  
”, then press ENTER.  
IMAGE  
2
Each time you press ENTER, the image turns  
clockwise by 90°.  
96 Playing JPEG image files  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To zoom in an image  
Press V/v/B/b to select an image in the “Album”  
1 display, then press ENTER.  
IMAGE  
Press B/b to select “  
”, then press ENTER.  
2
” appears.  
Press V/v/B/b to move “  
” to the position  
3
where you want to zoom in.  
Press ENTER repeatedly to change the  
4 magnification. Each time you press ENTER, the  
magnification changes as shown below.  
2× t normal magnification  
Note  
You cannot use ZOOM on the remote in JPEG image files on DATA CD/DATA DVD.  
To enjoy the Slide show  
Press V/v/B/b to select an image in the “Album”  
Interval  
1 display, then press ENTER.  
2
Press B/b to select “  
”, then press ENTER.  
IMAGE  
The “Interval” menu appears.  
Press B/b to select the desired play speed, then press  
3 ENTER.  
Slide show starts.  
To turn on/off the menu in the single image display  
Press CLEAR to turn off the menu. Press B or b to turn on the menu.  
To return to the “Album” display  
Press MENU to return to the “Album” display. Press . repeatedly to return to the  
first “Album” page.  
To return to the “Select a Media Type” menu  
Press x STOP twice, then press TOP MENU.  
Notes  
Slide show can play in only one direction.  
You cannot rotate or zoom in the image during Slide show.  
If you select “  
in the rotated image display, the images in the “Album” display will not  
be rotated. But if you start the slide show, the images will be rotated. Correct the rotation in  
the “  
menu.  
continued  
Playing JPEG image files 97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
About JPEG image files  
You can play back DATA CDs (CD-ROMs/CD-Rs/CD-RWs) or DATA DVDs (DVD-  
ROMs/DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs) recorded in JPEG format.  
However, the discs must be recorded according to ISO9660 Level 1/Level 2 or Joliet  
format and DATA DVDs of Universal Disk Format (UDF) for the player to recognize  
the tracks (or files). You can also play DATA CDs or DATA DVDs recorded in Multi  
Refer to the instructions supplied with the CD-R/CD-RW/DVD-R/DVD-RW drives  
and the recording software (not supplied) for details on the recording format.  
Notes  
If both video data and JPEG image files exist on a DATA DVD, the player recognizes only  
the video data.  
A total of up to 999 files can be recognized for discs that contain both MP3 and JPEG files.  
Files are recognized in the order that they were recorded. For example, if 990 JPEG files are  
recorded then 100 MP3 files are recorded, the 990 JPEG files recorded first and only the first  
9 MP3 files can be recognized.  
Note on Multi Session/Border discs  
If JPEG image files are recorded in the first session/border, the player will also play  
JPEG image files in other session/border. If audio tracks and images in Music CD  
format or Video CD format are recorded in the first session/border, only the first  
session/border will be played back.  
Tip  
If you add numbers (01, 02, 03, etc.) to the front of the file names, the files will be played in  
that order.  
Notes  
This player can play JPEG image files with the extension “.JPEG” or “.JPG.”  
Some DATA CDs or DATA DVDs cannot be played on this system depending on file format.  
The player may not be able to play some DATA CDs/DATA DVDs created in the Packet  
Write format.  
If you add the extension “.JPG” or “.JPEG” to data not in JPEG format, “Can not Display”  
will appear.  
Depending on the disc or the size of image files, playback may take some time to start.  
Progressive and lossless compression JPEG image files are not supported.  
The image size that can be displayed is limited. You can display the following images;  
width 32 - 7680 pixels by height 32 - 8192 pixels.  
98 Playing JPEG image files  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Playing VIDEO CDs with “PBC ON/OFF”  
Functions  
The PBC (Playback control) function allows  
you to search and perform other operations  
interactively. PBC playback follows a selection  
menu displayed on your TV screen.  
Number  
buttons  
V/v  
ENTER  
O RETURN  
MENU  
Press MENU to select “PBC ON.”  
1
The menu for your selection appears.  
Press V/v to select the item number you want.  
You can also use the number buttons to select the item number and track.  
2
continued  
Playing VIDEO CDs with “PBC ON/OFF” Functions 99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Press ENTER.  
3
4
Follow the instructions in the menu for interactive operations.  
Refer to the instructions supplied with the disc, as the operating procedure  
may differ depending on the VIDEO CD.  
To return to the menu  
Press O RETURN.  
To play using “PBC OFF”  
Press MENU to select “PBC OFF.”  
When “PBC OFF” is selected, the DVD player starts continuous play. You cannot play still  
pictures such as a menu.  
To return to “PBC ON,” press MENU to select “PBC ON.”  
Note  
Depending on the VIDEO CD, “Press ENTER” in step 3 may appear as “Press SELECT” in  
the instructions supplied with the disc. In this case, press H PLAY.  
100 Playing VIDEO CDs with “PBC ON/OFF” Functions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR Additional Operations  
Quick Timer Recording  
After you have started recording, you can  
have the VCR stop recording automatically  
after a specified duration.  
z REC  
x STOP  
While recording, press z REC.  
1
Press z REC repeatedly to set the duration time.  
2
Each press advances the time as follows.  
Normal recording  
0:30  
1:00  
1:30  
4:00  
The tape counter decreases minute by minute to 0:00, then the VCR stops  
recording.  
To extend the duration  
Press z REC repeatedly to set a new duration time.  
To cancel the duration  
Press z REC repeatedly until the indicator disappears and the VCR returns to  
normal recording mode.  
To stop while recording  
Press x STOP.  
Note  
You cannot display the current tape time in the display window when setting the recording  
duration time.  
Quick Timer Recording 101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Recording stereo and bilingual programs  
Recording stereo programs  
When you receive a program broadcast in stereo, press AUDIO to display “Hi-Fi” on  
the TV screen. You can also select “Left,” “Right,” or “Mono.” If there is noise in the  
stereo program, select “Mono.” The sound will be recorded in monaural (on both hi-  
fi and normal audio tracks) but with less noise.  
Recording bilingual programs  
Press AUDIO to display “SAP” on the TV screen. When a SAP (Second Audio  
Program) is received, “SAP” appears on the TV screen. When “MAIN” is selected,  
the VCR records only the main sound.  
Selecting the sound during playback  
During playback, press AUDIO to select the sound you want.  
To listen to  
Stereo  
On-screen display  
Display window  
STEREO indicator  
STEREO indicator  
STEREO indicator  
No indicator  
Hi-Fi  
Left  
Left channel  
Right channel  
Right  
Mono  
Monaural sound on the  
normal audio track  
How sound is recorded on a video tape  
The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the  
main track along with the picture. Monaural sound is recorded onto the normal audio  
track along the edge of the tape.  
Monaural sound  
Normal audio track  
Hi-fi audio track  
(main track)  
Stereo sound  
(left/right channels)  
Notes  
To play a tape in stereo, you must use the A/V connections.  
When you play a tape recorded in monaural, the sound is heard in monaural regardless of the  
AUDIO setting.  
102 Recording stereo and bilingual programs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
Searching using various functions  
The VCR automatically marks the tape with  
an index signal at the point where each  
recording begins.  
SEARCH  
You can easily find a specific point using  
various search functions.  
H PLAY  
V/v/B/b  
To search using the index function (Scan and Play)  
The VCR automatically marks the tape with an index signal at the point where each  
recording begins. Use these signals as references to find a specific recording.  
Insert an indexed tape into the VCR.  
1
2
Press SEARCH.  
Scan and play:  
Press  
Press  
Press  
or  
Go to  
End search:  
Press b to scan ahead, or B to scan backwards.  
3
4
The VCR searches and then plays back for about five  
seconds.  
Scan and play  
Press H PLAY to view that program.  
If you do not press H PLAY, the VCR automatically searches for the next index  
mark, or until it reaches the end of the tape.  
continued  
Searching using various functions 103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
To search for the counter 0:00:00 point  
To mark a point on the tape that you want to find later, reset the tape counter to  
“0:00:00.”  
The VCR automatically fast-forwards or rewinds to the 0:00:00 point on the tape  
counter.  
Press SEARCH.  
1
2
Press V.  
The VCR starts searching and automatically stops at  
the 0:00:00 point.  
Go to  
To search for a blank portion of the tape  
The VCR automatically searches for the beginning of a blank portion. You can easily  
find a point you can start recording from.  
Press SEARCH.  
1
2
Press v.  
The VCR starts searching and automatically stops at  
the beginning of a blank space. If no blank space is  
End search  
found, the VCR reaches the end.  
Note  
Once in recording mode, if the VCR is put in pause and then released to start the recording,  
no index mark will be inserted. An index mark will be inserted if the channel is changed  
while VCR is put in pause.  
104 Searching using various functions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Adjusting the picture (tracking)  
Although the VCR automatically adjusts the tracking  
when playing a tape, distortion may occur if the  
recording is in poor condition. In this case, manually  
adjust the tracking.  
Press TRACKING +/– to display the tracking meter.  
The distortion should disappear as you press one of  
the two tracking buttons.  
To resume automatic tracking adjustment, eject the  
tape and reinsert it.  
Tracking  
Tracking meter  
Note  
The auto tracking adjustment cannot be guaranteed to work with tapes recorded in the LP  
mode on other VCRs.  
Adjusting the picture (tracking) 105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Changing menu options  
You can change the tape length, auto play  
and auto repeat settings. Normally the  
default settings are used. Change these  
settings if necessary.  
SET UP  
H PLAY  
V/v/B/b  
ENTER  
Press SET UP when the DVD player is in stop  
mode.  
OPTION SETUP  
1
2
3
:English  
Language  
Clock Set/Adjust  
Channel Setup  
Auto Power Off  
[ Off ]  
RF Output Channel [3CH]  
V v  
ENTER RETURN SET UP  
Press V/v to select  
ENTER.  
(VIDEO) and press  
VIDEO FUNCTION SETUP  
Tape Length  
Auto Play  
Auto Repeat  
[ T120 ]  
[ On ]  
[ Off ]  
V v B b  
RETURN SET UP  
Press V/v to select the option to change.  
VIDEO FUNCTION SETUP  
Tape Length  
Auto Play  
Auto Repeat  
[ T120 ]  
[ On ]  
[ Off ]  
V v B b  
RETURN SET UP  
106 Changing menu options  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Press B/b to change the setting.  
4
5
Press SET UP to exit the menu.  
Menu choices  
The default settings are indicated in bold print.  
Menu option  
Set this option to  
Tape Length  
T-120 when using a T-120 or shorter length tape.  
T-160 when using a T-160 length tape.  
T-180 when using a T-180 or longer length tape.  
Auto Play  
On to start playback automatically, when you insert a tape with  
its safety tab removed.  
Off to turn off Auto play. You need to press H PLAY to start  
playback, even if you insert a tape with its safety tab removed.  
Auto Repeat  
On to play back a tape repeatedly. The VCR rewinds a tape to  
the beginning and restarts playback automatically.  
Off to turn off Auto repeat.  
Changing menu options 107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing with another VCR  
How to connect to record on this VCR  
TV  
This VCR (Recorder)  
LINE-2 IN  
Other VCR (Player)  
LINE OUT  
Audio/video cord  
(not supplied)  
: Signal flow  
Notes  
Make sure you connect the plugs to jacks of the same color.  
If the other VCR is a monaural type and connected to this VCR’s LINE-2 IN jacks, connect  
the audio plug to the AUDIO L (white) jack. The sound is recorded on both right and left  
channels. If you connect to the AUDIO R (red) jack, the sound is recorded only on the right  
channel.  
If you connected this VCR to both the LINE IN and LINE OUT jacks of the other VCR,  
select the input correctly to prevent a humming noise.  
You can use the LINE IN 1 jacks for editing. If the other VCR is a monaural type the sound  
is recorded only on the channel whose jack is connected to the audio plug. To record on both  
right and left channels, connect the audio plugs to the AUDIO L/R jacks using an audio/video  
cord (not supplied).  
108 Editing with another VCR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Operation (when recording on this VCR)  
Before you start editing  
x
• Turn on the VCR and the TV and set  
it to the video channel.  
• Press INPUT SELECT to display  
“L1” or “L2” in the display window.  
• Press SP/EP to select the tape speed,  
SP or EP.  
z REC  
X
Insert a source tape with its safety tab removed into the other (playback) VCR.  
1 Search for the point to start playback and set it to playback pause.  
Insert a tape into this (recording) VCR. Search for the point to start recording  
2 and press X.  
Press z REC on this VCR to set it to recording pause.  
3
4
To start editing, press the X (pause) buttons on both VCRs at the same time.  
To stop editing  
Press the x (stop) buttons on both VCRs.  
Tip  
To cut out unwanted scenes while editing, press X on this VCR when an unwanted scene  
begins. When it ends, press X again to resume recording.  
Editing with another VCR 109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
General setup information  
SET UP  
V/v/B/b  
ENTER  
Press SET UP when the DVD player is in stop  
mode, then press V/v to select  
(OPTION), then press ENTER.  
OPTION SETUP  
1
:English  
Language  
Clock Set/Adjust  
Channel Setup  
Auto Power Off  
[ Off ]  
RF Output Channel [3CH]  
V v  
ENTER RETURN SET UP  
Press V/v to select the option to change.  
OPTION SETUP  
2
:English  
Language  
Clock Set/Adjust  
Channel Setup  
Auto Power Off  
[ Off ]  
RF Output Channel [3CH]  
V v B b  
RETURN SET UP  
Press B/b to change the setting.  
3
When changing the “RF Output Channel,” confirmation messages will  
appear. Press ENTER to confirm the messages.  
110 General setup information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Press SET UP to exit the menu.  
4
Menu choices  
The default settings are indicated in bold print.  
Menu option  
Set this option to  
Auto Power Off  
Off” to deactivate the Auto Power Off function.  
“1Hr”/“2Hr” to turn the DVD-VCR off automatically if no  
signal is received and you do not press any of the buttons  
during this time.  
RF Output Channel  
3CH” when using channel 3 to receive the VCR signal.  
“4CH” when using channel 4 to receive the VCR signal.  
For details, see page 111.  
Setting the RF Output channel  
When connecting the DVD-VCR to the TV  
using only the antenna cable, you must set  
the RF Output channel in the “OPTION  
SETUP” menu so that the TV can receive the  
correct signal from the DVD-VCR.  
?/1  
CH +/–  
TV  
TV/VIDEO  
?/1  
CHANNEL +/–  
Set the RF Output channel to “3CH” or “4CH” (see page 110 to set the channel),  
1 whichever channel is not used in your area. If both are used, set the switch to  
either channel.  
Press ?/1 to turn on the DVD-VCR.  
2
3
4
Press TV/VIDEO to turn on “VIDEO” in the DVD-VCR’s display window.  
Press CH +/– to display a channel number in the display window.  
Select an active channel number in your area.  
continued  
General setup information 111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Turn on your TV and set it to the channel you selected in step 1 (3CH or 4CH).  
5
The channel you selected in step 4 appears on the TV screen. If the channels  
change when you press CH +/–, you have made the correct setting.  
Whenever you use the DVD-VCR, set the TV to the channel selected in step 1.  
Attaching the external antenna connector  
When using a 300-ohm twin lead cable for a  
VHF/UHF antenna, use an antenna connector  
(not supplied) to connect the antenna to the  
DVD-VCR.  
300-ohm twin  
lead cable  
Antenna  
connector  
(not supplied)  
Loosen the screws on the antenna connector.  
1
2
3
Wind the twin leads around the screws on the antenna connector.  
Retighten the screws.  
Attaching a VHF/UHF band mixer  
When using both a 75-ohm coaxial cable and  
a 300-ohm twin lead cable for a VHF/UHF  
antenna, use a VHF/UHF band separator/  
mixer (not supplied) to connect the antenna  
to the DVD-VCR.  
300-ohm twin  
lead cable  
VHF/UHF  
band  
separator/  
mixer (not  
supplied)  
75-ohm coaxial  
cable  
Loosen the screws on the mixer.  
1
Wind the twin leads around the screws on the mixer.  
2
3
4
Retighten the screws.  
Connect the 75-ohm coaxial cable to the mixer.  
112 General setup information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Troubleshooting  
If you have any questions or problems not covered below, please consult your nearest Sony  
dealer. (For customers in USA)  
General Troubleshooting  
Symptom  
Remedy  
The ?/1 switch does not function.  
Connect the AC power cord securely.  
The power is turned on but the DVD-  
VCR does not operate.  
Moisture condensation has occurred. Turn the power off,  
unplug the AC power cord and leave the DVD-VCR to  
dry for over three hours.  
The clock has stopped and “–:–”  
appears in the display window.  
The clock stops if the DVD-VCR is disconnected from  
the wall outlet. Reset the clock (and timer).  
The remote commander does not  
function.  
Make sure you are pointing the remote commander at the  
remote sensor on the DVD-VCR.  
Replace all the batteries in the remote commander with  
new ones if they are weak.  
Make sure the TV / DVD·VIDEO switch is set correctly.  
Select correctly VIDEO or DVD with the SELECT DVD/  
VIDEO button.  
The tracking meter does not appear  
on the screen.  
The recording condition of the tape is very poor and  
tracking cannot be adjusted.  
You cannot control other TVs.  
Set your TV’s code number. The code number may  
change when you replace the batteries of the remote  
commander.  
continued  
Troubleshooting 113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DVD Troubleshooting  
Symptom  
Remedy  
There is no picture/picture noise  
appears.  
Re-connect the connecting cord securely.  
The connecting cords are damaged.  
Check the connection to your TV (page 13) and switch  
the input selector on your TV so that the signal from the  
player appears on the TV screen.  
The disc is dirty or flawed.  
If the picture output from your player goes through your  
VCR to get to your TV or if you are connected to a  
combination TV/VIDEO player, the copy-protection  
signal applied to some DVD programs could affect  
picture quality. If you still experience problems even  
when you connect your player directly to your TV, please  
try connecting your player to your TV’s S-VIDEO input  
You have set the player to progressive format (the  
PROGRESSIVE indicator lights up in orange) even  
though your TV cannot accept the progressive signal. In  
this case, set “Progressive” to “Off” (page 70).  
Even if your TV is compatible with progressive format  
(480p) signals, the image may be affected when you set  
the player to progressive format. In this case, set  
“Progressive” to “Off” and the player is set to normal  
(interlace) format (page 70).  
COMPONENT VIDEO OUT jack is not used or  
“Progressive” of the “SCREEN SETUP” menu is not set  
correctly while the PROGRESSIVE indicator lights up in  
orange. Check the setting (page 68) and connection  
Even though you set the aspect ratio  
in “TV Type” of the “SCREEN  
SETUP” menu the picture does not  
fill the screen.  
The aspect ratio of the disc is fixed on your DVD.  
There is no picture from your VCR  
connected to the LINE IN jacks.  
The DVD player must be in standby mode to view  
pictures from your VCR.  
There is no sound.  
Re-connect the connecting cord securely.  
The connecting cord is damaged.  
The player is connected to the wrong input jack on the  
amplifier (receiver) (page 14).  
The amplifier (receiver) input is not correctly set.  
The player is in pause mode or in Slow-motion Play mode.  
The player is in fast forward or fast reverse mode.  
If the audio signal does not come through the DIGITAL  
AUDIO OUT (OPTICAL or COAXIAL) jack, check the  
audio settings (page 66).  
Sound is noisy.  
When playing a CD with DTS sound tracks, noise will  
come from the LINE OUT L/R (AUDIO) jacks (page 37)  
or DIGITAL AUDIO OUT (OPTICAL or COAXIAL)  
jack.  
The sound volume is low.  
The sound volume is low on some DVDs. The sound  
volume may improve if you set “Audio DRC” to “Wide  
Range” (page 67).  
114 Troubleshooting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Remedy  
The disc does not play.  
The disc is turned over.  
Insert the disc with the playback side facing down on the  
disc tray.  
The disc is skewed.  
The player cannot play certain discs (page 6).  
The region code on the DVD does not match the player.  
Moisture has condensed inside the player (page 3).  
The player cannot play a recorded disc that is not  
correctly finalized (page 7).  
Make sure the TV / DVD·VIDEO switch is set correctly.  
Select correctly VIDEO or DVD with SELECT DVD/  
VIDEO button.  
The MP3 audio track cannot be  
The DATA CD or DATA DVD is not recorded in the MP3  
format that conforms to ISO9660 Level 1/Level 2 or  
UDF.  
The MP3 audio track does not have the extension “.MP3.”  
The data is not formatted in MP3 even though it has the  
extension “.MP3.”  
The data is not MPEG1 Audio Layer 3 data.  
The player cannot play audio tracks in MP3PRO format.  
The JPEG image file cannot be  
played.  
The DATA CD or DATA DVD is not recorded in JPEG  
format that conforms to ISO9660 Level 1/Level 2 or  
UDF.  
The JPEG image file does not have the extension “.JPG”  
or “.JPEG.”  
The data is not formatted in JPEG even though it has the  
extension “.JPG” or “JPEG.”  
Length or width of the image is more than 4720 dots.  
The title of the MP3 audio album/  
track or JPEG image album/file is not  
correctly displayed.  
The player can only display numbers and alphabet. Other  
characters are displayed as asterisks.  
The disc does not start playing from  
the beginning.  
Program play, shuffle play, or repeat play, has been  
selected (pages 82, 84, 85).  
Resume play has taken effect (page 36).  
The player starts playing the disc  
automatically.  
The disc features an auto playback function.  
Playback stops automatically.  
While playing discs with an auto pause signal, the player  
stops playback at the auto pause signal.  
You cannot perform some functions  
such as stop, search, slow-motion  
play, repeat play, shuffle play, or  
program play.  
Depending on the disc, you may not be able to do some  
operations. See the operating manual that comes with the  
disc.  
The language for the sound track  
cannot be changed.  
Try using the DVD’s menu instead of the direct selection  
button on the remote (page 77).  
Multilingual tracks are not recorded on the DVD being  
played.  
The DVD prohibits the changing of the language for the  
sound track.  
continued  
Troubleshooting 115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Remedy  
The subtitle language cannot be  
changed or turned off.  
Try using the DVD’s menu instead of the direct selection  
button on the remote (page 77).  
Multilingual subtitles are not recorded on the DVD being  
played.  
The DVD prohibits the changing of the subtitles.  
The angles cannot be changed.  
Try using the DVD’s menu instead of the direct selection  
button on the remote (page 77).  
Multi-angles are not recorded on the DVD being played.  
The DVD prohibits changing of the angles.  
The player does not operate properly.  
When static electricity, etc., causes the player to operate  
abnormally, unplug the player.  
VCR Troubleshooting  
Symptom  
Remedy  
The playback picture does not appear  
on the TV screen.  
Make sure the TV is set to the channel for the VCR. If  
you are using a monitor, set it to video input.  
The picture is not clear.  
Adjust the tracking with the TRACKING +/– buttons.  
The video heads are dirty (see the last page of  
“Troubleshooting”). Clean the video heads using a Sony  
video head cleaning cassette. If a Sony cleaning cassette  
is not available in your area, have the heads cleaned at  
your nearest Sony dealer (a standard service fee will be  
charged). Do not use a commercially available liquid  
type cleaning cassette, as it may damage the video heads.  
The video heads may have to be replaced. Consult your  
local Sony dealer for more information.  
The picture rolls vertically during  
picture search.  
Adjust the vertical hold control on the TV or monitor.  
The picture has no sound.  
The tape is defective.  
If you made A/V connections, check the audio cord  
connection.  
A TV program does not appear on  
the TV screen.  
Make sure the TV is set to the channel for the VCR. If  
you are using a monitor, set it to video input.  
Select the correct source with the INPUT SELECT or  
CH +/– buttons. Select a channel number when recording  
TV programs; select “L1” or “L2” when recording from  
other equipment.  
TV reception is poor.  
Adjust the TV antenna.  
The tape starts playing as soon as it is  
inserted.  
The safety tab has been removed. To record on this tape,  
cover the tab hole.  
The tape is ejected when you press  
z REC.  
Check that the safety tab has not been removed.  
Nothing happens when you press  
Make sure the tape is not at its end.  
z REC.  
116 Troubleshooting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Symptom  
Remedy  
The timer does not operate.  
Check that the clock is set.  
Make sure a tape has been inserted.  
Check that the safety tab has not been removed.  
Make sure the tape is not at its end.  
Make sure a program has been set for timer recording.  
Make sure your timer settings are past the current time.  
Check that the cable box is turned on.  
The clock stops if the DVD-VCR is disconnected from  
the wall outlet for more than one minute. Reset the clock  
and timer.  
Turn the power off and unplug the AC power cord.  
A tape cannot be inserted.  
Check that a tape is not already in the tape compartment.  
The VCR mechanism needs to be  
cleaned.  
Clean the cabinet, panel and controls with a dry, soft  
cloth, or a soft cloth slightly moistened with a mild  
detergent solution. Do not use any type of solvent, such  
as alcohol or benzine.  
Control by AV mouse is not possible.  
The unit is not compatible with satellite TV receiver AV  
mouse, etc.  
Symptoms caused by contaminated video heads  
• Normal picture  
• Rough picture  
• Unclear picture  
• No picture (or  
black & white  
screen appears)  
initial  
terminal  
contamination  
Troubleshooting 117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Chapter (page 38)  
Sections of a picture or a music feature that  
are smaller than titles. A title is composed of  
several chapters. Depending on the disc, no  
chapters may be recorded.  
A disc that contains up to 8 hours of moving  
pictures even though its diameter is the same  
as a CD.  
The data capacity of a single-layer and  
single-sided DVD is 4.7 GB (Giga Byte),  
which is 7 times that of a CD. The data  
capacity of a double-layer and single-sided  
DVD is 8.5 GB, a single-layer and double-  
sided DVD is 9.4 GB, and double-layer and  
double-sided DVD is 17GB.  
The picture data uses the MPEG 2 format,  
one of the worldwide standards of digital  
compression technology. The picture data is  
compressed to about 1/40 (average) of its  
original size. The DVD also uses a variable  
rate coding technology that changes the data  
to be allocated according to the status of the  
picture. Audio information is recorded in a  
multi-channel format, such as Dolby Digital,  
allowing you to enjoy a more real audio  
presence.  
Dolby Digital (pages 62 and 67)  
Digital audio compression technology  
developed by Dolby Laboratories. This  
technology conforms to 5.1-channel  
surround sound. The rear channel is stereo  
and there is a discrete subwoofer channel in  
this format. Dolby Digital provides the same  
5.1 discrete channels of high quality digital  
audio found in Dolby Digital cinema audio  
systems. Good channel separation is realized  
because all of the channel data are recorded  
discretely and little deterioration is realized  
because all channel data processing is digital.  
Dolby Surround (Pro Logic) (page 62)  
Audio signal processing technology that  
Dolby Laboratories developed for surround  
sound. When the input signal contains a  
surround component, the Pro Logic process  
outputs the front, center and rear signals.  
The rear channel is monaural.  
Furthermore, various advanced functions  
such as the multi-angle, multilingual, and  
Parental Control functions are provided with  
the DVD.  
A DVD-RW is a recordable and rewritable  
disc that is the same size as a DVD VIDEO.  
The DVD-RW has two different modes: VR  
mode and Video mode. DVD-RWs created  
in Video mode have the same format as a  
DVD VIDEO, while discs created in VR  
(Video Recording) mode allow the contents  
to be programmed or edited.  
Digital audio compression technology that  
Digital Theater Systems, Inc. developed.  
This technology conforms to 5.1-channel  
surround sound. The rear channel is stereo  
and there is a discrete subwoofer channel in  
this format. DTS provides the same 5.1  
discrete channels of high quality digital  
audio.  
Good channel separation is realized because  
all of the channel data is recorded discretely  
and little deterioration is realized because all  
channel data processing is digital.  
A DVD+RW (plus RW) is a recordable and  
rewritable disc. DVD+RWs use a recording  
format that is comparable to the DVD  
VIDEO format.  
118 Glossary  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Interlace format  
Interlace format shows every other line of an  
image as a single “field” and is the standard  
method for displaying images on television.  
The even number field shows the even  
numbered lines of an image, and the odd  
numbered field shows the odd numbered  
lines of an image.  
Progressive format (pages 65 and 70)  
Compared to the Interlace format that  
alternately shows every other line of an  
image (field) to create one frame, the  
Progressive format shows the entire image at  
once as a single frame. This means that  
while the Interlace format can show 30  
frames/60 fields in one second, the  
Progressive format can show 60 frames in  
one second. The overall picture quality  
increases and still images, text, and  
horizontal lines appear sharper. This player  
is compatible with the 480 progressive  
format.  
The longest section of a picture or music  
feature on a DVD, movie, etc., in video  
software, or the entire album in audio  
software.  
Sections of a picture or a music feature on a  
CD or VIDEO CD (the length of a song).  
Glossary 119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Specifications  
COMPONENT VIDEO OUT (Y, Pb, Pr)  
Phono jack  
Y: 1.0 Vp-p/Pb, Pr: 0.7 Vp-p, 75 ohms  
S-VIDEO OUT  
System  
Laser  
Semiconductor laser  
Format  
VHS NTSC standard  
Video recording system  
Rotary head helical scanning FM system  
Video heads  
4-pin, mini-DIN jack  
Y: 1.0 Vp-p, unbalanced, sync negative  
C: 0.286 Vp-p, load impedance 75 ohms  
Timer section  
Clock  
Double azimuth four heads  
Video signal  
Quartz locked  
Timer indication  
12-hour cycle  
Timer setting  
8 programs (max.)  
NTSC color, EIA standards  
Tape speed  
3
SP: 33.35 mm/s (1  
inches/s)  
8
EP: 11.12 mm/s ( 7 inches/s)  
16  
LP: 16.67 mm/s ( 11 inches/s),  
16  
playback only  
General  
Power requirements  
120 V AC, 60 Hz  
Power consumption  
25 W  
Maximum recording/playback time  
8 hrs. in EP mode (with T-160 tape)  
Rewind time  
Approx. 1 min (with T-120 tape)  
Power back-up  
Tuner section  
Back-up duration: 0 min  
Operating temperature  
0°C to 45°C (32°F to 113°F)  
Storage temperature  
–20°C to 60°C (–4°F to 140°F)  
Operating humidity  
25% to 80%  
Channel coverage  
VHF 2 to 13  
UHF 14 to 69  
CATV A-8 to A-1, A to W, W+1 to W+84  
Antenna  
75-ohm antenna terminal for VHF/UHF  
Dimensions including projecting parts and controls  
(w/h/d)  
Inputs and outputs  
LINE IN 1 and LINE-2 IN  
D560P: Approx. 430 × 85 × 294 mm  
3
5
(Approx. 17 × 3  
× 11  
inches)  
VIDEO IN, phono jack (1 each)  
8
8
D360P: Approx. 430 × 85 × 287 mm  
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync  
negative  
AUDIO IN, phono jacks (2 each)  
Input level: 327 mVrms  
3
3
(Approx. 17 × 3  
Mass  
Approx. 3.6 kg (Approx. 7.9 lbs)  
× 11  
inches)  
8
8
Input impedance: more than 47 kilohms  
LINE OUT  
Supplied accessories  
Remote commander (1)  
Size AA (R6) batteries (2)  
75-ohm coaxial cable with F-type connectors (1)  
VIDEO OUT, phono jack (1)  
Output signal: 1 Vp-p, 75 ohms, unbalanced, sync  
negative  
AUDIO OUT, phono jacks (2)  
Standard output: 327 mVrms  
Load impedance: 47 kilohms  
Output impedance: less than 10 kilohms  
DIGITAL OUT  
Design and specifications are subject to change without  
notice.  
OPTICAL, Optical output jack  
–18 dBm (wave length: 660 nm)  
COAXIAL, phono jack  
Output signal: 0.5 Vp-p, 75 ohms  
120 Specifications  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index to parts and controls  
Refer to the pages indicated in parentheses ( ) for details.  
Front panel  
SLV-D560P  
SLV-D360P  
A ?/1 POWER (on/standby) switch (11)  
J X (pause) button (34) (43)  
K H (play) button*1 (34) (42)  
B PROGRESSIVE indicator (65) (70)  
C Disc tray (33)  
L DIAL TIMER*2 (51)  
M
Remote sensor (10)  
D A (open/close) button (33) (35)  
E Tape compartment (45)  
F A (eject) button (43)  
N CHANNEL/TRACKING +/– buttons*1  
O SELECT DVD/VIDEO buttons (10)  
P LINE-2 IN VIDEO/AUDIO L/R jacks*3  
G z REC (record) button (46)  
H m (rewind)/M (fast-forward) button  
1
*
H and CHANNEL/TRACKING + buttons  
have a tactile dot. Use the tactile dot as a  
reference.  
I x (stop) button (34) (43)  
2
3
*
*
SLV-D560P only  
Covered  
continued  
Index to parts and controls 121  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Display window  
A DVD indicator (34)  
B Angle indicator (80)  
C MONTH indicator* (51)  
D DAY indicator* (54)  
E YEAR indicator* (54)  
F DATE indicator* (51)  
G Record indicator (46)  
H VIDEO indicator (42)  
I Tape indicator (42)  
J Timer indicator (49)  
K STEREO indicator (102)  
L Playing time/clock/current status  
indicator (34) (42)  
M SURR (surround) indicator (88)  
N DTS indicator (67)  
O Disc indicator (34)  
SLV-D560P only  
122 Index to parts and controls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear panel  
DVD player and VCR  
DVD player only  
A AC power cord (13) (16)  
F LINE OUT AUDIO L/R jacks (64)  
B LINE IN 1 VIDEO/AUDIO L/R jacks  
G COMPONENT VIDEO OUT Pr/Pb/Y  
C LINE OUT VIDEO/AUDIO L/R jacks  
H S-VIDEO OUT jack (64)  
I DIGITAL AUDIO OUT/OPTICAL jack  
D IN (FROM ANT.) connector (15)  
E OUT (TO TV) connector (15)  
J DIGITAL AUDIO OUT/COAXIAL jack  
continued  
Index to parts and controls 123  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E CLEAR button (83)  
F ANGLE button (80)  
G SET UP button (20)  
H SUBTITLE button (81)  
I AUDIO button*1 (87)  
Remote commander for DVD  
J
K
SKIP button (34)  
REPLAY button (34)  
L X PAUSE button (34)  
M H PLAY button*1 (34)  
N V/v/B/b buttons (20)  
ENTER button*2 (20)  
O DISPLAY button (39)  
P TOP MENU button (77)  
Q ?/1 (on/standby) switch (11) (36)  
R VOL (volume) +/– buttons (11)  
S ZOOM button (79)  
T ENTER button*2 (20)  
U REPEAT button (82)  
V SURROUND button (88)  
W
m/M y buttons (34)  
X .PREV (previous)/> NEXT  
button (34)  
Y x STOP button (34)  
Z O RETURN button (23)  
A Z (open/close) button (33) (35)  
B TV / DVD·VIDEO switch (10)  
C SELECT DVD button (10)  
D Number buttons*1 (29)  
wj MENU button (77)  
1
*
Number 5, AUDIO and H PLAY buttons  
have a tactile dot. Use the tactile dot as a  
reference.  
The ENTER buttons 14 and 20 can be used  
interchangeably.  
2
*
124 Index to parts and controls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
G TIMER button (48)  
Remote commander for VIDEO  
H AUDIO button*1 (102)  
I
J
SKIP button (43)  
REPLAY button (43)  
K SP (Standard Play)/EP (Extended Play)  
button (46)  
L z REC (record) button (46)  
M X PAUSE button (43)  
N H PLAY button*1 (42)  
O V/v/B/b buttons (20)  
ENTER button*2 (20)  
P DISPLAY button (44)  
Q ?/1 (on/standby) switch (11) (43)  
R VCR Plus+ button*3 (56)  
S CH (channel)/TRACKING +/– buttons*1  
T VOL (volume) +/– buttons (11)  
U ENTER button*2 (20)  
V MUTING button (11)  
W SEARCH button (103)  
X TV/VIDEO button (47)  
Y INPUT SELECT button (47)  
Z m (rewind)/M (fast-forward)/y (slow)  
buttons (43)  
A Z (eject) button (43)  
wj ./> SHUTTLE button (43)  
B TV / DVD·VIDEO switch (10)  
C SELECT VIDEO button (10)  
D Number buttons*1 (29)  
E CLEAR button (44) (49)  
F SET UP button (20)  
wk x STOP button (43)  
wl O RETURN button (57)  
1
*
Number 5, AUDIO, H PLAY and  
CH/TRACKING + buttons have a tactile dot.  
Use the tactile dot as a reference.  
2
3
*
*
The ENTER buttons 15 and 21 can be used  
interchangeably.  
SLV-D560P only  
Index to parts and controls 125  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Audio/Subtitle Language  
Abbreviation  
ARA  
BUL  
CHI  
Language  
Arabic  
Bulgarian  
Chinese  
Croatian  
Czech  
CRO  
CZE  
DAN  
DEU  
ENG  
ESP  
Danish  
German  
English  
Spanish  
Finish  
FIN  
FRA  
GRE  
HUN  
IDN  
French  
Greek  
Hungarian  
Indonesian  
Hindi  
IND  
ISL  
Icelandic  
Italian  
ITA  
IWR  
JPN  
Hebrew  
Japanese  
Korean  
KOR  
MAL  
NLD  
NOR  
POL  
POR  
RUS  
SVE  
THA  
TUR  
VIE  
Malay  
Dutch  
Norwegian  
Polish  
Portuguese  
Russian  
Swedish  
Thai  
Turkish  
Vietnamese  
Afrikaans  
ZAF  
126 DVD Audio/Subtitle Language  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Index  
Numerics  
16:9 69  
4:3 Letter Box 69  
4:3 Pan Scan 69  
using the VCR Plus+  
system 56  
while watching another  
program 47, 50  
I
Instant Advance 35  
Instant Replay 35, 43  
Instant Skip 43  
Repeat play 85  
Resume Play 36  
RF channel 111  
A
J
Adjusting  
JPEG 6, 95  
picture 105  
tracking 105  
Angle 80  
Antenna hookup 15  
Audio track 102  
Audio/video (A/V) hookup 14  
Auto Clock Set 22  
S
L
Safety tab 47  
SAP (Second Audio Program)  
Language selecting 20  
LP mode 47  
Searching  
M
at various speeds 35, 43  
for a blank portion 104  
for the counter 0 point 104  
Scan and Play 103  
Shuffle play 84  
Shuttle play 43  
SP mode 46  
STEREO 87  
Stereo 102  
Subtitle 81  
Monaural 102  
Monitoring audio during  
playback 102  
C
MP3 6, 90  
Cable hookup 13  
Channel line-up chart 30  
Cleaning the video heads 116  
Clock setting 22  
N
Normal audio track 102  
Connecting  
P
Cable TV 19  
external antenna connector  
Parental Control 74  
PBC (Playback control) 99  
Picture adjustment 105  
Playback  
T
VHF/UHF band mixer 112  
Counter 44  
Custom AV Mode 40  
Timer setting  
daily/weekly recording 49  
using the Dial Timer 51  
using the VCR Plus+  
system 56  
at various speeds 35, 43  
frame by frame 43  
MP3 audio track 90  
program play 82  
repeat play 85  
selecting the sound 102  
shuffle play 84  
shuttle play 43  
slow motion 35, 43  
VIDEO CDs 99  
D
DATA CD 6, 90, 95  
DATA DVD 6, 90, 95  
Demonstration Mode 55  
Dial Timer 51  
Disabling channels 28  
DOLBY DIGITAL 62, 87  
DTS 63, 87  
Adjusting  
U
Usable discs 6  
V
Playback quickly or slowly with  
sound 36  
Presetting channels 26  
Program play 82  
Dubbing. see Editing  
DVD 6  
VCR Plus+ system  
channel set up 30  
recording 56  
E
VIDEO CD 6, 99  
Progressive 65, 119  
Editing 108  
Z
EP mode 46  
R
Zoom 79  
H
Recording  
bilingual programs 102  
SAP broadcasts 102  
saving 47  
Handling discs 8  
Hi-fi audio track 102  
stereo broadcasts 102  
using the Dial Timer 51  
Index 127  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sony Corporation Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AK68-00580B  

Sennheiser SONAR RS 110 User Manual
Sharp All in One Printer CPD 3830 User Manual
Sony CD Player CDX 4180RV User Manual
Sony Speaker SS S3 User Manual
SOYO Computer Hardware SY K7VEMPRO User Manual
Sportline Fitness Electronics 4409 User Manual
Sterling Marine Safety Devices SFC K 40 User Manual
Sun Microsystems Server V880 User Manual
Tally Genicom Printer MIP3F User Manual
Tanita Scale BF 574 User Manual