Sony DVD VCR Combo SLV D271PDVD User Manual

2-671-545-11 (1) US/ES  
DVD Player/  
Video Cassette  
Recorder  
Operating Instructions  
US  
ES  
Manual de instrucciones  
For customers in the USA  
If you have any questions about your Sony DVD-VCR, you may call Sony Customer  
Information Center at 1-800-VHS-SONY (847-7669).  
For all other Sony product questions, please call Sony Customer Information Center at  
1-800-222-SONY (7669).  
Or write to: Sony Customer Information Center 12451 Gateway Boulevard Ft. Myers,  
FL 33913  
For Customers in Canada  
If this product is not working properly, please call 1-877-602-2008 for Peace of Mind  
Warranty Replacement service.  
For other product related questions please contact our Customer Information Service  
Center at 1-877-899-7669 or write to us at: Customer Information Service 115 Gordon  
Baker Road, Toronto, Ontario, M2H 3R6  
SLV-D271P  
© 2006 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On adjusting volume  
Do not turn up the volume while listening to a  
section with very low level inputs or no audio  
signals. If you do, the speakers may be damaged  
when a peak level section is played.  
Precautions  
On safety  
To prevent fire or shock hazard, do not place  
objects filled with liquids, such as vases, on the  
apparatus.  
Should any solid object or liquid fall into the  
cabinet, unplug the player and have it checked  
by qualified personnel before operating it any  
further.  
On cleaning  
Clean the cabinet, panel and controls with a soft  
cloth slightly moistened with a mild detergent  
solution. Do not use any type of abrasive pad,  
scouring powder or solvent, such as alcohol or  
benzine.  
On cleaning discs, disc/lens cleaners  
On power sources  
Do not use a commercially available cleaning  
disc or disc/lens cleaner (wet or spray type).  
These may cause the apparatus to malfunction.  
Operate the unit only on 120 V AC, 60 Hz.  
This unit is not disconnected from the AC power  
source (mains) as long as it is connected to the  
wall outlet, even if the unit itself has been turned  
off.  
On cleaning the video heads  
Unplug the unit from the wall outlet if you do  
not intend to use it for an extended period of  
time. To disconnect the cord, pull it out by the  
plug, never by the cord.  
• Rough  
picture  
• Unclear  
picture  
• No picture  
(or black &  
whitescreen  
appears)  
US  
On placement  
Do not install the unit in a confined space such  
as a bookshelf or similar unit.  
Do not install the unit in an inclined position. It  
is designed to be operated in a horizontal  
position only.  
initial  
contamination  
terminal  
Keep the unit, discs and cassettes away from  
equipment with strong magnets, such as  
microwave ovens or large loudspeakers.  
Do not place heavy objects on the unit.  
When the video heads are dirty, clean the video  
heads using a Sony video head cleaning cassette. If  
a Sony cleaning cassette is not available in your  
area, have the heads cleaned at your nearest Sony  
dealer (a standard service fee will be charged). Do  
not use a commercially available liquid type  
cleaning cassette, as it may damage the video  
heads.  
On operation  
When you move the player, take out any discs. If  
you don’t, the disc may be damaged.  
If the unit is brought directly from a cold to a  
warm location, or is placed in a very damp  
room, moisture may condense on the lenses  
inside the player and cause damage to the video  
head, tape, and the optical block. Should this  
occur, the player may not operate properly.  
When you first install the player, or when you  
move it from a cold to a warm location, remove  
the disc and tape and leave the player turned on  
for about three hours before operating the  
player.  
continued  
3US  
Precautions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Copyright  
Important Safety Instructions  
Television programs, films, video tapes and  
other materials may be copyrighted.  
1
2
3
4
5
6
7
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with dry cloth.  
Do not block any ventilation openings. Install in  
accordance with the manufacturer’s  
instructions.  
Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade or  
the third prong are provided for your safety. If  
the provided plug does not fit into your outlet,  
consult an electrician for replacement of the  
obsolete outlet.  
Unauthorized recording of such material may be  
contrary to the provisions of the copyright laws.  
Also, use of this recorder with cable television  
transmission may require authorization from the  
cable television transmission and/or program  
owner.  
This product incorporates copyright protection  
technology that is protected by U.S. patents and  
other intellectual property rights. Use of this  
copyright protection technology must be  
authorized by Macrovision, and is intended for  
home and other limited viewing uses only  
unless otherwise authorized by Macrovision.  
Reverse engineering or disassembly is  
prohibited.  
8
9
IMPORTANT NOTICE  
Caution: This player is capable of holding a still  
video image or on-screen display image on your  
television screen indefinitely. If you leave the still  
video image or on-screen display image  
displayed on your TV for an extended period of  
time you risk permanent damage to your  
television screen. Projection televisions are  
especially susceptible to this.  
10 Protect the power cord from being walked on or  
pinched particularly at plugs, convenience  
receptacles, and the point where they exit from  
the apparatus.  
11 Only use attachments/accessories specified by  
the manufacturer.  
12 Use only with the cart, stand,  
tripod, bracket, or table  
specified by the manufacturer,  
or sold with the apparatus.  
When a cart is used, use caution  
when moving the cart/apparatus  
combination to avoid injury  
from tip-over.  
13 Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
14 Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way, such  
as power-supply cord or plug is damaged, liquid  
has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or  
has been dropped.  
4US  
Precautions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
WARNING  
Notes about discs  
Precautions  
About this manual  
This player can play the following discs  
10 Step 1 : Unpacking  
11 Step 2 : Setting up the remote commander  
14 Step 3 : Basic hookups  
20 Step 4 : Selecting a language  
22 Step 5 : Setting the clock  
26 Step 6 : Presetting channels  
30 S-Video/Component Video hookup  
32 A/V Receiver hookup  
34 Playing discs  
38 Guide to the on-screen display  
41 Playing a tape  
45 Recording TV programs  
48 Recording TV programs using the timer  
51 Checking/changing/canceling timer settings  
53 Locking the DVD-VCR (Child Lock)  
continued  
5US  
Table of contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54 Audio Setup  
56 Screen Setup  
60 Setting the display or sound track language  
62 Parental Control (limiting playback by children)  
65 Using the DVD’s menu  
66 Zooming into a scene  
67 Changing the angles  
68 Displaying the subtitle  
70 Various play mode functions (Program play, Shuffle play, Repeat play)  
74 Changing the sound  
76 Virtual surround setting  
78 Playing an MP3 audio track  
84 Playing JPEG image files  
88 Playing VIDEO CDs with “PBC ON/OFF” Functions  
90 Quick Timer Recording  
91 Recording stereo and bilingual programs  
92 Searching using various functions  
94 Changing menu options  
96 Editing with another VCR  
98 General setup information  
101 Troubleshooting  
106 Glossary  
108 Specifications  
109 Index to parts and controls  
113 DVD Audio/Subtitle Language  
114 Index  
6US  
Table of contents  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About this manual  
This player can play the  
following discs  
• This manual mainly explains operations  
using the remote, but the same operations can  
also be performed using the buttons on the  
DVD-VCR having the same or similar  
names.  
Format of discs  
DVD VIDEO  
“DVD” may be used as a general term for DVD  
VIDEOs, DVD-RWs/DVD-Rs, and DVD+RWs/  
DVD+Rs.  
The meaning of the icons used in this manual is  
described below:  
DVD-RW/-R  
DVD+RW/+R  
Icon  
Meaning  
Functions available for DVD  
VIDEOs and DVD-RWs/DVD-  
Rs in video mode or DVD+RWs/  
DVD+Rs  
Functions available for DVD-  
RWs/DVD-Rs in VR (Video  
Recording) mode  
VIDEO CD/  
Music CD  
Functions available for VIDEO  
CDs, Super VCDs or CD-Rs/CD-  
RWs in video CD format or Super  
VCD format  
CD-RW/-R  
Functions available for music  
CDs or CD-Rs/CD-RWs in music  
CD format  
“DVD+RW,” “DVD-RW,” “DVD+R,” “DVD+R  
DL,” “DVD-R,” “DVD VIDEO,” and “CD” logos  
are trademarks.  
Functions available for DATA  
CDs (CD-ROMs/CD-Rs/CD-  
RWs containing MP3* audio  
tracks or JPEG files)  
Note about CDs/DVDs  
Functions available for DATA  
DVDs (DVD-ROMs/DVD+RWs/  
DVD+Rs/DVD-RWs/DVD-Rs  
containing MP3* audio tracks or  
JPEG files)  
The player can play CD-ROMs/CD-Rs/CD-RWs  
recorded in the following formats:  
– music CD format  
– video CD format  
Functions available for VHS  
VIDEOs  
– MP3 audio tracks and JPEG image files of  
format conforming to ISO 9660* Level 1/  
Level 2, or its extended format, Joliet  
– KODAK Picture CD format  
* A logical format of files and folders on CD-ROMs,  
defined by ISO (International Organization for  
Standardization).  
* MP3 (MPEG 1 Audio Layer 3) is a standard format  
defined by ISO/MPEG which compresses audio  
data.  
The player can play DVD-ROMs/DVD+RWs/  
DVD+Rs/DVD-RWs/DVD-Rs recorded in the  
following formats:  
– MP3 audio tracks and JPEG image files of  
format conforming to UDF (Universal Disk  
Format)  
– 8 cm DVD+RW, DVD-RW, and DVD-R  
recorded with a DVD Video camera  
continued  
7US  
About this manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
Region code  
Notes about DVD+RWs/  
DVD+Rs, DVD-RWs/DVD-Rs or  
CD-Rs/CD-RWs  
Your player has a region code printed on the back  
of the unit and only will play DVD VIDEO discs  
(playback only) labeled with identical region codes.  
This system is used to protect copyrights.  
Some DVD+RWs/DVD+Rs, DVD-RWs/DVD-  
Rs or CD-Rs/CD-RWs cannot be played on this  
player due to the recording quality or physical  
condition of the disc, or the characteristics of the  
recording device and authoring software.  
The disc will not play if it has not been correctly  
finalized. For more information, refer to the  
operating instructions for the recording device.  
Note that some playback functions may not  
work with some DVD+RWs/DVD+Rs, even if  
they have been correctly finalized. In this case,  
view the disc by normal playback. Also some  
DATA CDs/DATA DVDs created in Packet  
Write format cannot be played.  
ALL  
DVDs labeled  
will also play on this player.  
If you try to play any other DVD VIDEO, a  
message will appear on the TV screen to indicate  
that the disc is not playable. Depending on the DVD  
VIDEO, no region code indication may be labeled  
even though playing the DVD VIDEO is prohibited  
by area restrictions.  
SLV-DXXXX  
NO.  
X
Region code  
Note on playback operations  
of DVDs and VIDEO CDs  
Example of discs that the  
player cannot play  
Some playback operations of DVDs and VIDEO  
CDs may be intentionally set by software  
producers. Since this player plays DVDs and  
VIDEO CDs according to the disc contents the  
software producers designed, some playback  
features may not be available. Also, refer to the  
instructions supplied with the DVDs or VIDEO  
CDs.  
The player cannot play the following discs:  
• CD-ROMs/CD-Rs/CD-RWs other than those  
recorded in the formats listed on the previous  
page.  
• CD-ROMs recorded in PHOTO CD format.  
• Data part of CD-Extras  
• DVD Audios  
• HD layer on Super Audio CDs  
Music discs encoded with  
copyright protection  
technologies  
Also, the player cannot play the following discs:  
• A DVD VIDEO with a different region code.  
• A disc recorded in a color system other than  
NTSC, such as PAL or SECAM (this player  
conforms to the NTSC color system).  
• A disc that has a non-standard shape (e.g.,  
card, heart).  
• A disc with paper or stickers on it.  
• A disc that has the adhesive of cellophane tape  
or a sticker still left on it.  
This product is designed to playback discs that  
conform to the Compact Disc (CD) standard.  
Recently, various music discs encoded with  
copyright protection technologies are marketed  
by some record companies. Please be aware that  
among those discs, there are some that do not  
conform to the CD standard and may not be  
playable by this product.  
8US  
This player can play the following discs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Note on DualDiscs  
This product is designed to playback discs that  
conform to the Compact Disc (CD) standard. A  
DualDisc is a two sided disc product which  
mates DVD recorded material on one side with  
digital audio material on the other side. Please  
be aware that the audio side of a DualDisc may  
not play on this product because these discs do  
not conform to the CD standard.  
“DualDisc” is a trademark of the Recording  
Industry Association of America (RIAA).  
9US  
This player can play the following discs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Step 1 : Unpacking  
Check that you have received the following items with the DVD-VCR:  
• Remote commander  
• 75-ohm coaxial cable with F-type  
connectors  
• Size AA (R6) batteries  
Note  
The supplied remote commander is for the exclusive use of this DVD-VCR.  
10US  
Unpacking  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Step 2 : Setting up the remote commander  
Inserting the batteries  
Insert two size AA (R6) batteries by matching  
the + and – on the batteries to the diagram  
inside the battery compartment.  
Insert the negative (–) end first, then push in  
and down until the positive (+) end clicks into  
position.  
Reattach the cover after inserting the battery.  
continued  
11US  
Setting up the remote commander  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the remote commander  
You can use this remote commander to operate  
this DVD-VCR and a Sony TV. Buttons on the  
remote commander marked with an orange dot  
(•) can be used to operate your Sony TV.  
Remote sensor  
If the TV does not have the  
symbol near the  
remote sensor, this remote commander will not  
operate the TV.  
TV / DVD·VIDEO  
switch  
SELECT VIDEO  
SELECT DVD  
To operate  
Set TV / DVD·VIDEO switch to  
the DVD player  
DVD·VIDEO, then press SELECT DVD and point at the remote sensor at the  
DVD-VCR  
the VCR  
DVD·VIDEO, then press SELECT VIDEO and point at the remote sensor at the  
DVD-VCR  
a Sony TV  
TV and point at the remote sensor at a Sony TV  
Notes  
With normal use, the batteries should last about three to six months.  
If you do not use the remote commander for an extended period of time, remove the batteries  
to avoid possible damage from battery leakage.  
Do not use a new battery with an old one.  
Do not use different types of batteries.  
Do not leave the remote commander in an extremely hot or humid place.  
Do not drop any foreign object into the remote casing, particularly when replacing the batteries.  
Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so  
may cause a malfunction.  
12US  
Setting up the remote commander  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Controlling a Sony TV with the remote commander  
You can use this remote to operate your Sony TV. Use the buttons marked with an  
orange dot (•).  
When the TV / DVD·VIDEO switch is set to TV, the remote performs the following:  
Buttons  
Operations  
?/1  
Turns a Sony TV on or off  
VOL +/–  
Adjusts the volume of a Sony TV  
Selects the channel on a Sony TV  
Selects the channel on a Sony TV  
Mutes a Sony TV equipped with the muting function  
Switches a Sony TV’s input source  
CH +/–  
Number buttons and ENTER  
MUTING  
TV/VIDEO  
To control the DVD-VCR, reset TV / DVD·VIDEO switch to DVD·VIDEO.  
13US  
Setting up the remote commander  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Step 3 : Basic hookups  
Before you get started  
• Be sure to disconnect the AC power cord of each component before connecting.  
• Turn off the power to all equipment.  
• Do not connect the AC power cords until all of the connections are completed. If  
you connect the AC power cord before the connections are completed, you may not  
be able to use the Plug and Play function.  
• Be sure you make connections firmly. Loose connections may cause picture  
distortion.  
• If your TV does not match any of the examples provided, see your nearest Sony  
dealer or qualified technician.  
Selecting the best hookup option  
There are many ways in which your DVD-VCR can be hooked up. To hook up your DVD-VCR  
so that it works best for you, first scan through the table below. Then use the accompanying  
diagrams and procedures on the following pages to set up your DVD-VCR.  
If your TV has audio/video inputs, refer to page 15 for audio/video (A/V) hookup. Then follow  
one of the hookups below. If your TV does not have A/V inputs, go directly to one of the  
hookups below.  
If you have  
Use  
Refer to  
Antenna only, no cable TV  
Hookup 1 A or B  
Page 16 and 18  
(Plug and Play)  
No cable box or cable box with only a few  
scrambled channels  
Hookup 1 C  
(Plug and Play)  
Page 17 and 18  
Page 19  
Cable box with many scrambled channels  
Hookup 2  
After you have completed the connections, follow the instructions for setup.  
After you have completed the setup, you are ready to use your DVD-VCR. Procedures differ  
depending on the hookup you used.  
Caution  
Connections between the DVD-VCR’s VHF/UHF connector and the antenna terminals of the  
TV receiver should be made only as shown in the following instructions. Failure to do so may  
result in operation that violates the regulations of the Federal Communications Commission  
regarding the use and operation of RF devices. Never connect the output of the DVD-VCR to an  
antenna or make simultaneous (parallel) antenna and DVD-VCR connections at the antenna  
terminals of your receiver.  
Note to CATV system installer (in USA)  
This reminder is provided to call the CATV system installer’s attention to Article 820- 40 of the  
NEC that provides guidelines for proper grounding and, in particular, specifies that the cable  
ground shall be connected to the grounding system of the building, as close to the point of cable  
entry as practical.  
14US  
Basic hookups  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Audio/video (A/V) hookup  
If your TV has audio/video (A/V) input jacks, you will get better picture and sound if you hook  
up your DVD-VCR using these connections. If your TV does not have A/V inputs, see the  
following pages for antenna or cable hookups. Note that “Advanced Hookups” (page 30)  
explains additional hookup methods that will optimize the picture and sound for a true  
“hometheater” experience.  
If you are not planning to use your DVD-VCR to record programs, you only need to make the  
connections shown on this page. If you want to record regular or cable TV programs, complete  
these connections first, and then go to the following pages for antenna or cable hookups.  
A Use this hookup if your TV has stereo jacks  
DVD-VCR  
Stereo receiver  
TV  
Audio/video cord  
(not supplied)  
Audio cord (not supplied)  
B Use this hookup if your TV does not have stereo jacks  
DVD-VCR  
Stereo receiver  
TV  
Video cord  
(not supplied)  
Audio cord (not supplied)  
Notes  
To play a tape/disc in stereo, you must use the A/V connection.  
If you do not have a stereo receiver, connect the white LINE OUT/AUDIO L jack to the  
AUDIO IN jack on your TV.  
continued  
Basic hookups  
15US  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Hookup 1 (Plug and Play)  
A Use this hookup if you are using:  
• VHF/UHF antenna (you get channels 2–13 and channels 14 and higher)  
• UHF-only antenna (you get channels 14 and higher)  
• Separate VHF and UHF antennas  
Rear of TV  
VHF/UHF  
Match the type of  
connector on your  
TV: A, B, or C.  
A
or  
or  
VHF  
DVD-VCR  
B
UHF  
VHF  
C
UHF  
B Use this hookup if you are using a VHF-only antenna (you get  
channels 2–13 only)  
Rear of TV  
VHF/UHF  
A
Match the type of  
connector on your  
TV: A, B, or C.  
or  
or  
DVD-VCR  
VHF  
For connector  
types B and C, no  
UHF connection is  
required.  
B
UHF  
VHF  
C
UHF  
If you cannot connect your antenna cable to the DVD-VCR directly  
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external  
antenna connector (not supplied) so you can connect the cable to the IN connector. If  
you have separate cables for VHF and UHF antennas, you should use a U/V band  
mixer (not supplied) (page 100).  
16US  
Basic hookups  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
C Use this hookup if you have no cable box, or a cable box with only a  
few scrambled channels  
What you can do with this hookup  
• Record any unscrambled channel by selecting the channel on the VCR  
What you cannot do  
• Record scrambled channels that require a cable box  
DVD-VCR  
Rear of TV  
Wall  
VHF/UHF  
A
Match the type  
of connector  
on your TV: A,  
B, or C.  
or  
or  
VHF  
B
For connector  
types B and C,  
no UHF  
connection is  
required.  
UHF  
VHF  
Connect this cable  
directly to your TV if  
you do not have a  
cable box.  
Cable box  
C
UHF  
continued  
17US  
Basic hookups  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DVD-VCR setup (Hookup 1 continued)  
Plug the DVD-VCR into an AC outlet.  
The DVD-VCR automatically presets the DVD-VCR’s clock and TV channels when  
the DVD-VCR is plugged into the AC outlet.  
to AC outlet  
AC power cord  
The DVD-VCR starts presetting the  
clock and channels.  
When Auto preset is completed, the  
current time appears in the display  
window.  
You have now completed DVD-VCR setup.  
To begin using your DVD-VCR, go to “Basic Operations” on page 34.  
To change the on-screen display language to French or Spanish, see  
The clock is set using a time signal provided by some TV channels. If the clock is  
incorrect, or “–:–” appears in the display window, see “Using Manual Clock Set” on  
To add or disable channels manually, see “Presetting/disabling channels manually”  
Notes  
If you connect the AC power cord before the antenna connections are completed, the channels  
may be incorrectly set. If this happens, see “Step 6 : Presetting channels” on page 26.  
Do not press any buttons on the DVD-VCR or remote commander during Auto preset.  
Auto preset starts automatically only when you plug in the AC power cord for the first time  
after you purchase the DVD-VCR.  
Auto preset can be performed by pressing x on the unit continuously for 5 seconds or more  
with the DVD-VCR power turned off.  
18US  
Basic hookups  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Hookup 2  
Use this hookup if you are connecting a cable box with many scrambled  
channels  
What you can do with this hookup  
• Record any channel by selecting the channel on the cable box  
What you cannot do  
• Record with the cable box turned off  
• Record one channel while watching another channel  
Cable box  
Rear of TV  
VHF/UHF  
Wall  
A
Match the type of  
connector on your  
TV: A, B, or C.  
or  
or  
VHF  
B
For connector  
types B and C, no  
UHF connection  
is required.  
UHF  
VHF  
C
DVD-VCR  
UHF  
After you have completed hookup…  
After you have completed hookup, plug the DVD-VCR into an AC outlet and see  
to AC outlet  
AC power cord  
19US  
Basic hookups  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Step 4 : Selecting a language  
You can change the on-screen display  
language.  
SET UP  
Before you start…  
• Turn on the DVD-VCR and your TV.  
• Set the TV to video input so that the signal  
from the player appears on the TV screen.  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
• If the DVD player is in play mode, you  
cannot display the setup menu. Stop the  
DVD playback.  
V/v  
ENTER  
Press SET UP, then press V/v to select  
(OPTION) and press ENTER.  
1
Press V/v to select “Language”, then press  
2
ENTER.  
The “LANGUAGE/IDIOMA/LANGUE”  
menu appears.  
Press V/v to select the desired language, English, Spanish or French, then  
press ENTER.  
3
20US  
Selecting a language  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Press SET UP to exit the menu.  
4
21US  
Selecting a language  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 5 : Setting the clock  
You must set the clock on the DVD-VCR to use the timer features properly.  
Using the Auto Clock Set feature  
Some TV and cable channels transmit time  
signals with their broadcasts. Your DVD-  
VCR can pick up this time signal to  
automatically set the clock.  
SET UP  
The Auto Clock Set feature works only if a  
channel in your area is broadcasting a time  
signal. If broadcasters in your area are not  
sending time signals, set the time manually  
Before you start…  
V/v/B/b  
ENTER  
• Turn on the DVD-VCR and your TV.  
When using a cable box, turn it on.  
• Set the TV to video input so that the signal  
from the player appears on the TV screen.  
O RETURN  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
• If the DVD player is in play mode, you  
cannot display the setup menu. Stop the  
DVD playback.  
Press SET UP, then press V/v to select  
(OPTION) and press ENTER.  
1
Press V/v to select “Clock Set/Adjust”, then  
2
press ENTER.  
The “CLOCK SET/ADJUST” menu appears.  
22US  
Setting the clock  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Press V/v to select “Auto”, then press  
3
4
ENTER.  
Press V/v to select the item you want, then press B/b to make the setting.  
• For “Clock data CH”  
Leave the setting to “Auto” to have the  
DVD-VCR automatically search for a  
channel that carries a time signal. Press B/b  
to select a channel that carries a time signal.  
Use this option if you know of a channel that  
carries a time signal. Most PBS member  
stations broadcast a time signal. For the  
fastest response, select your local PBS  
station.  
• For “Time zone”  
Select the time zone of your area, or select  
“Auto” to have the DVD-VCR automatically  
set your time zone.  
The options are:  
Auto y Atl. (Atlantic) y East (Eastern)  
y Cen. (Central) y Mtn. (Mountain) y  
Pac. (Pacific) y Alas (Alaska) y  
Haw. (Hawaii) y Auto  
• For “Daylight saving”  
Select “Yes” or “No” (standard time), or  
“Auto” to have the DVD-VCR automatically  
set the daylight saving time.  
Press O RETURN, then press SET UP to exit the menu.  
5
6
To activate the Auto Clock Set function, turn off the DVD-VCR.  
continued  
23US  
Setting the clock  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Notes  
The clock cannot be set automatically if you do not receive a channel that carries a time  
signal in your area. If so, set the clock manually (page 24).  
If there are only a few channels in your area that carry time signals, setting the clock  
automatically may take up to about 20 minutes. If nothing happens even after you wait about  
20 minutes, set the clock manually (page 24).  
If you made Hookup 2, make sure you leave the cable box on.  
The clock display appears when VIDEO mode is selected with no tape inserted or when the  
DVD-VCR is turned off.  
Using Manual Clock Set  
Before you start…  
SET UP  
• Turn on the DVD-VCR and your TV.  
• Set the TV to video input so that the signal  
from the player appears on the TV screen.  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
• If the DVD player is in play mode, you  
cannot display the setup menu. Stop the  
DVD playback.  
V/v/B/b  
ENTER  
Press SET UP, then press V/v to select  
1
2
(OPTION) and press ENTER.  
Press V/v to select “Clock Set/Adjust”, then  
press ENTER.  
The “CLOCK SET/ADJUST” menu appears.  
24US  
Setting the clock  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Press V/v to select Manual, then press  
3
4
ENTER.  
Set the hour, minutes, month, day and year in  
sequence by pressing B/b to select the item to  
be set, and press V/v to select the digits.  
The day of the week is set automatically.  
Press ENTER to confirm the setting.  
Press SET UP to exit the menu.  
5
6
Note  
The clock display appears when VIDEO mode is selected with no tape inserted or when the  
DVD-VCR is turned off.  
25US  
Setting the clock  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 6 : Presetting channels  
This DVD-VCR is capable of receiving VHF channels 2 to 13, UHF channels 14 to 69 and  
unscrambled CATV channels 1 to 125. First, we recommend that you preset the receivable  
channels in your area using automatic presetting methods. Then, if there are any unwanted  
channels, disable them manually. If you have already decided which channels you wish to  
preset, set them directly using manual presetting methods (page 28).  
Presetting all receivable channels automatically  
Before you start…  
SET UP  
• Turn on the DVD-VCR and your TV.  
When using a cable box, turn it on.  
• Set the TV to video input so that the signal  
from the player appears on the TV screen.  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
• If the DVD player is in play mode, you  
cannot display the setup menu. Stop the  
DVD playback.  
V/v/B/b  
ENTER  
Press SET UP, then press V/v to select  
(OPTION) and press ENTER.  
1
26US  
Presetting channels  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Press V/v to select “Channel Setup”, then  
2
press ENTER.  
The “CHANNEL SETUP” menu appears.  
Press V/v to select “Ant/Cable.”  
3
4
• To preset cable TV channels:  
Press B/b to select “Cable TV.”  
To preset VHF and UHF channels:  
Press B/b to select “Antenna.”  
Press V/v to select “Auto Channel Memory,”  
then press ENTER.  
5
All receivable channels are preset in numerical  
sequence. When no more receivable channels  
can be found, presetting stops and the picture  
from the lowest numbered channel is displayed  
on the TV screen.  
continued  
27US  
Presetting channels  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Presetting/disabling channels manually  
Before you start…  
• Turn on the DVD-VCR and your TV.  
When using a cable box, turn it on.  
• Set the TV to video input so that the signal  
from the player appears on the TV screen.  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
CH +/–  
Number  
buttons  
• If the DVD player is in play mode, you  
cannot display the setup menu. Stop the  
DVD playback.  
SET UP  
V/v/B/b  
ENTER  
O RETURN  
Press SET UP, then press V/v to select  
(OPTION) and press ENTER.  
1
Press V/v to select “Channel Setup”, then  
2
press ENTER.  
The “CHANNEL SETUP” menu appears.  
28US  
Presetting channels  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Press V/v to select “Channel Add/Delete,” then press ENTER.  
3
4
To preset/disable a channel:  
Channel to be preset  
1 Press CH +/– or number buttons to enter  
the channel number.  
2 Press B/b to select “ADD” (in memory)  
or “DELETE” (deleted).  
3 Press ENTER.  
Channel to be disabled  
Press O RETURN to confirm the setting.  
5
6
Press SET UP to exit the menu.  
Note  
If you have not preset channels automatically, you cannot preset/disable channels manually.  
29US  
Presetting channels  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advanced Hookups  
S-Video/Component Video hookup  
Select one of the following patterns A or B, according to the input jack on your TV monitor,  
projector, or AV amplifier (receiver). You can enjoy higher quality images when playing DVDs.  
Make audio connections using the LINE OUT AUDIO L/R jacks or DIGITAL AUDIO OUT  
(COAXIAL) jacks on the right side of the DVD-VCR when you use S-VIDEO/Component  
Video hookup. See page 32 for audio connections.  
If your TV accepts progressive (480p) format signals, you must use the connection B.  
DVD-VCR  
to S-VIDEO OUT  
to COMPONENT  
VIDEO OUT  
(red)  
(green)  
(blue)  
S-VIDEO cord  
(not supplied)  
TV  
TV  
Component video cord  
(not supplied)  
(green)  
(red)  
(blue)  
l : Signal flow  
(DVD only)  
30US  
S-Video/Component Video hookup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
AUse this hookup if your TV has an S-VIDEO input jack  
Connect an S-VIDEO cord (not supplied). You will enjoy high quality images.  
BUse this hookup if your TV has component video input jacks  
Connect a component video cord (not supplied) or three video cords (not supplied) of  
the same kind and length. You will enjoy accurate color reproduction and high quality  
images.  
If your TV accepts progressive (480p) format signals, you must use this connection  
and then set “Progressive” to “On” in the “SCREEN SETUP” menu. For details, see  
Notes  
The connection using S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only for  
the DVD player. The signal from the VCR will not be output.  
In the connection using S-VIDEO OUT jack, if you set “Progressive” to “On” in the  
“SCREEN SETUP” menu, S-Video playback may be distorted.  
31US  
S-Video/Component Video hookup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
A/V Receiver hookup  
Select one of the following patterns A or B, accordiing to the input jack on your AV amplifier  
(receiver). This will enable you to listen to DVD audio tracks through your AV amplifier  
(receiver).  
For correct speaker location, see the operating instructions supplied with the connected  
components.  
DVD-VCR  
Stereo audio cord  
(not supplied)  
(white)  
(red)  
to DIGITAL AUDIO  
OUT (COAXIAL)  
or  
Coaxial digital cord  
(not supplied)  
to LINE OUT L/R (AUDIO)  
l : Signal flow  
(white)  
(red)  
to audio input  
to coaxial digital input  
[Speakers]  
Rear (L)  
[Speakers]  
Rear (R)  
Front (L)  
Center  
Front (R)  
AV amplifier (receiver)  
with a decoder  
Subwoofer  
32US  
A/V Receiver hookup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
A Connecting to audio L/R jacks  
This connection uses a stereo amplifier’s (receiver’s) two front speakers for sound.  
You can enjoy the surround function that creates virtual speakers from two stereo  
speakers. Select from “Surround1”, “Surround2” or “Surround3” of the surround  
effects (page 76).  
B Connecting to a digital audio (COAXIAL) input jack  
Use this connection if your AV amplifier (receiver) has a Dolby*1 Digital or DTS*2  
decoder and a digital input jack. You can enjoy the surround effect of Dolby Digital  
(5.1ch) or DTS (5.1ch).  
*1 Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.  
*2 “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.  
Notes  
After you have completed the connection using DIGITAL AUDIO OUT (COAXIAL), be  
sure to set “Dolby Digital” to “Dolby Digital” and “DTS” to “On” in “AUDIO SETUP”  
menu (page 54). Otherwise, no sound or a loud noise will come from the speakers.  
With a coaxial digital connection, you cannot use the virtual surround effects of this recorder.  
33US  
A/V Receiver hookup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic Operations  
Playing discs  
Depending on the disc, some operations may  
be different or restricted. Refer to the  
operating instructions supplied with your  
disc.  
Z
SELECT DVD  
Before you start ...  
• Turn on the DVD-VCR and your TV.  
• Set the TV to video input so that the signal  
from the player appears on the TV screen.  
/
m/M y  
./ >  
X PAUSE  
x STOP  
H PLAY  
Press SELECT DVD to control the DVD player.  
1
2
Press Z to open the disc tray and  
place a disc on the disc tray.  
with the playback  
side facing down  
34US  
Playing discs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Press H PLAY.  
3
The disc tray closes and the  
DVD player starts playback.  
The display window shows the  
playback time*.  
Hour Minute Second  
Depending on the disc, a menu  
may appear on the TV screen.  
For DVDs, see page 65. For VIDEO CDs, see page 88.  
* “– – – – –” appears when no disc is loaded.  
Tip  
To make a video timer reservation during DVD playback, we recommend performing the  
Notes  
You can change the screen type using the “SCREEN SETUP” menu (see “Screen Setup” on  
Stop VIDEO playback while playing back a disc.  
If you play a DVD or VIDEO CD that has scratches, the player may stop playback at the  
point of the scratch.  
Playback of play lists longer than 10 hours recorded in VR mode is not guaranteed.  
Additional operations  
To  
Press  
Stop play  
Pause play  
x STOP  
X PAUSE  
If you pause the DVD player for more than 5 minutes, the  
DVD player will automatically stop.  
Resume play after pause  
H PLAY  
SKIP  
Go to the next frame in pause mode  
Go to the previous frame in pause mode  
REPLAY  
Go to the next chapter, track, or scene in > NEXT on the remote or M on the unit  
continuous play mode  
Go back to the previous chapter, track,  
or scene in continuous play mode  
. PREV on the remote or m on the unit  
continued  
35US  
Playing discs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
To  
Press  
Locate a point quickly  
m or M on the remote (or hold down m or M on the  
unit)  
The playback speed changes as follows each time you press  
the button on the remote (or depending on how long you press  
the button on the unit):  
DVD  
fast forward: PLAY t ×1.4 ••N*1 t 1M t 2M  
t 3M t 4M t 5M t 6M  
fast reverse: PLAY t 1m t 2m t 3m t 4m  
t 5m t 6m  
CD, MP3 and VIDEO CD  
fast forward: PLAY t 1M t 2M t 3M  
fast reverse: PLAY t 1m t 2m t 3m  
When you find the point you want, press H PLAY.  
X PAUSE during playback, then press or y  
Watch slow motion in continuous play  
mode (DVD and VIDEO CD only)  
The playback speed changes as follows each time you press  
or y:  
DVD  
forward slow motion: ×0.6••N*1 t 2 y t 3 y  
reverse slow motion (except for DVD-RW in VR mode): 1  
t 2  
t 3  
VIDEO CD  
forward slow motion only: 1 y t 2 y t 3 y  
To resume normal playback, press H PLAY.  
Replay the previous scene for 10  
seconds in continuous play mode*2  
(Instant Replay)  
REPLAY  
Briefly fast forward the current scene  
for 30 seconds in continuous play  
mode*2 (Instant Advance)  
SKIP  
You can press  
forward up to 2 minutes in total.  
SKIP up to 4 times. This allows you to fast  
Stop play and remove the disc  
Z
*2 For DVD VIDEOs and DVD-RWs/DVD-Rs or DVD+RWs/DVD+Rs only  
Notes  
No sound is output except for:  
– during normal play  
– during playback quickly or slowly with sound  
You cannot perform playback quickly or slowly with sound when a virtual surround effect is  
set.  
The fast reverse operation may not be possible for CD, MP3 and VIDEO CD depending on  
the recording method.  
You may not be able to use the Instant Replay or Instant Advance function with some scenes.  
Switching between original (ORG) and play list (PL) within a disc recorded in VR mode is  
possible only while the disc is stopped. Press TOP MENU to switch between ORG and PL.  
36US  
Playing discs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
To playback quickly or slowly with sound (DVD only)  
You can listen to dialog or sound while playing the current scene quickly or slowly.  
To playback quickly, press M during playback.  
To playback slowly, press X PAUSE, then press y during playback.  
Press H PLAY to return to normal playback.  
Notes  
You cannot set virtual surround effects while performing playback quickly or slowly with  
sound. In addition, you cannot perform playback quickly or slowly with sound when a virtual  
surround effect is set.  
You cannot perform DTS audio output during playback quickly or slowly with sound.  
In addition, you cannot perform playback quickly or slowly with sound when DTS audio  
output is set.  
To Resume playback for the current disc (Resume Play)  
The DVD player remembers the point where you stopped the disc even if the DVD  
player enters standby mode by pressing ?/1.  
While playing a disc, press x STOP to stop playback.  
1
2
Press H PLAY.  
The DVD player starts playback from the point where you stopped the disc in  
Step 1.  
Tip  
To begin playback from the top of the disc, press x STOP twice then press H PLAY.  
Notes on playing DTS* sound tracks on a CD  
When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks.  
To avoid possible damage to the audio system, the consumer should take proper precautions  
when the analog stereo jacks of the DVD player are connected to an amplification system. To  
enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be  
connected to the digital jack of the DVD player.  
Set the sound to “Stereo” using the AUDIO button when you play DTS sound tracks on a CD  
Do not play DTS sound tracks without first connecting the DVD player to an audio  
component having a built-in DTS decoder. The DVD player outputs the DTS signal via the  
DIGITAL AUDIO OUT (COAXIAL) jack even if “DTS” is set to “Off” in “AUDIO SETUP”  
menu (page 54), and may affect your ears or cause your speakers to be damaged.  
Notes on playing DVDs with a DTS sound track  
DTS audio signals are output only through the DIGITAL AUDIO OUT (COAXIAL) jack.  
When you play a DVD with DTS sound tracks, set “DTS” to “On” in “AUDIO SETUP”  
If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to  
“On” in “AUDIO SETUP” menu (page 54). A loud noise may come out from the speakers,  
affecting your ears or causing the speakers to be damaged.  
* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.  
37US  
Playing discs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Guide to the on-screen display  
You can check disc information during  
playback.  
The displayed contents differ according to  
the type of disc being played.  
Before you start…  
Number buttons  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
V/v/B/b  
ENTER  
O RETURN  
DISPLAY  
Press DISPLAY during playback. The following information appears; type of disc, current title/  
track, chapter, counter position, voice language, subtitle language and Custom AV Mode  
setting. Refer to “DVD Audio/Subtitle Language” on page 113 for the abbreviation of the  
language.  
Type of disc  
Current title/track number  
Current chapter number  
Counter position  
Voice language  
Subtitle language  
Custom AV Mode  
Note  
You cannot select disc information items when the disc is stopped.  
38US  
Guide to the on-screen display  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
To playback the desired title/track or chapter  
You can playback the desired title/track or chapter using  
this menu.  
Press V/v during playback to select the desired item.  
1
Press B/b to change the item.  
2
Press ENTER to start playback.  
3
Press DISPLAY or O RETURN to turn off the  
4 menu.  
The title/track or chapter icon will appear on the DVD playback screen followed by  
the current title/track or chapter number and the counter position.  
To playback from the desired title/track counter position  
You can playback from the desired title/track counter  
position using this menu.  
Press V/v during playback to select the counter  
1 position icon.  
Enter the desired elapsed playing time of the current  
2 title/track using the number buttons.  
Press ENTER to start playback.  
3
Press DISPLAY or O RETURN to turn off the  
4 menu.  
Tip  
You can change the counter position information (playing time or remaining time) using  
B/b (DVD and CD only).  
DVD  
Indication  
: ∗∗ : ∗∗  
T– : ∗∗ : ∗∗  
: ∗∗ : ∗∗  
Counter information  
T
Elapsed playing time of the current title  
Remaining time of the current title  
Elapsed playing time of the current chapter  
Remaining time of the current chapter  
C
C– : ∗∗ : ∗∗  
CD  
Indication  
Counter information  
T
: ∗∗ : ∗∗  
T– : ∗∗ : ∗∗  
: ∗∗ : ∗∗  
D– : ∗∗ : ∗∗  
Elapsed playing time of the current track  
Remaining time of the current track  
Elapsed playing time of the disc  
Remaining time of the disc  
D
continued  
Guide to the on-screen display  
39US  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Notes  
The display may not change as operated depending on the disc.  
The display window continue indicating the playing time even when the counter position  
information on the on-screen display is being changed.  
To adjust the playback picture (Custom AV Mode)  
You can adjust the video signal of the DVD or VIDEO CD (with PBC function off)  
from the player to obtain the picture quality you want. Choose the setting that best  
suits the program you are watching.  
Press V/v during playback to select the Custom AV  
1 Mode icon.  
Press B/b to change the setting.  
2
Setting  
Video Setting  
Audio Setting  
Dynamic 1  
Produces a bold dynamic picture Full (modulated) sound with  
by increasing the picture contrast clear treble and bass.  
and the color intensity.  
Dynamic 2  
Produces a more dynamic  
picture than Dynamic 1 by  
further increasing the picture  
contrast and the color intensity.  
Full (modulated) sound with  
even clearer treble and bass than  
Dynamic 1.  
Standard  
Cinema 2  
Cinema 1  
Off (Default setting)  
Displays a standard picture.  
Standard sound.  
Enhances details in dark areas by Powerful sound with even  
increasing the black level.  
stronger bass than Cinema 1.  
White colors become brighter  
and black colors become richer,  
and the color contrast is  
increased.  
Powerful sound with strong bass.  
Tip  
When you watch a movie, “Cinema 1” or “Cinema 2” is recommended.  
40US  
Guide to the on-screen display  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Playing a tape  
Before you start ...  
Z
• Turn on the DVD-VCR and your TV.  
• Set the TV to video input so that the signal  
from the player appears on the TV screen.  
?/1  
SELECT VIDEO  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
TRACKING +/–  
CLEAR  
/
m/M y  
./>  
X PAUSE  
x STOP  
H PLAY  
DISPLAY  
Press SELECT VIDEO to control the VCR player.  
1
2
3
Insert a tape.  
The VCR starts playing automatically if  
you insert a tape with its safety tab  
removed.  
Press H PLAY.  
The display window shows the  
playback time.  
When the tape reaches the end,  
it will rewind automatically.  
Hour Minute Second  
continued  
41US  
Playing a tape  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Additional operations  
To  
Press  
Stop play  
Pause play  
x STOP  
X PAUSE  
If you pause the VCR for more than 5 minutes, the VCR will  
automatically resume play.  
Resume play after pause  
Fast-forward the tape  
Rewind the tape  
X PAUSE or H PLAY  
M during stop  
m during stop  
Z
Eject the tape  
View the picture during fast-forward During fast-forward, hold down M. During rewind, hold down  
or rewind  
m.  
Play at high speed  
During playback, briefly press M or m. The tape  
continues to play at 5 times normal speed.  
During playback, hold down M or m. The tape continues  
to play at 5 times normal speed. When you release the button,  
normal playback resumes.  
Play in slow motion  
Play frame by frame  
During pause, press y.  
During pause, press  
SKIP.  
REPLAY.  
Replay the previous scene in  
continuous play mode* (Instant  
Replay)  
During playback, press  
Fast forward the current scene for 30  
seconds in continuous play mode  
(Instant Skip)  
During playback, press  
SKIP.  
You can press  
SKIP up to 4 times. This allows you to fast  
forward up to 2 minutes in total.  
Play at various speeds  
(Shuttle play)  
During playback, press .or >. You can change the  
playback speed as follows.  
×7 y ×5 y ×3 y STILL y SLOW y PLAY y ×2  
y ×3 y ×5 y ×7  
* For 10 seconds in SP or LP mode/for 15 seconds in EP mode  
To resume normal playback  
Press H PLAY.  
To turn off the power while rewinding (Rewind Shut Off)  
Press ?/1 while the tape is rewinding. The power will turn off but the tape will keep  
rewinding until it reaches the end.  
42US  
Playing a tape  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                         
To use the time counter  
Press CLEAR at the point on the tape that you want to find later. The counter in the  
display window resets to “0:00:00.” To search for the counter 0:00:00 point  
To display the counter on the TV screen, press DISPLAY during normal playback.  
Tip  
Adjust the picture using the TRACKING +/– buttons if:  
– Streaks appear while playing in slow motion.  
– Bands appear at the top or bottom while pausing.  
– The picture shakes during pause.  
Notes  
Tapes recorded in LP mode on other VCRs can be played back on this VCR but the picture  
quality cannot be guaranteed.  
The counter resets to “0:00:00” whenever a tape is reinserted.  
The counter stops counting when it comes to a portion with no recording.  
When 10 hours have passed, the counter in the display window returns to “0:00:00” and the  
count starts over again.  
No sound is output during playback at various speeds.  
The picture may show noise when playing at high speed in reverse.  
While playing a tape, you can display the setup menu, but the remote commander’s function  
switches to DVD automatically. Press O RETURN repeatedly to exit the menu.  
When playback does not start even if you insert a tape with its safety tab removed, set “Auto  
Play” to “On” in the “VIDEO FUNCTION SETUP” menu (page 94).  
Stop disc playback while playing back a video.  
The VCR can also play S-VHS tapes recorded by S-VHS mode. The VCR will automatically  
identify the type of tape inserted in the VCR (either VHS or S-VHS). When S-VHS tapes are  
played in the VCR, the enhanced resolution will not be visible on screen; there may also be  
picture distortion while playing the S-VHS tape in slow motion or while utilizing other  
special playback modes. The VCR will not record in S-VHS mode on an S-VHS tape.  
The playback of S-VHS tapes recorded in EP/LP mode cannot be guaranteed.  
continued  
43US  
Playing a tape  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Adjusting the picture (tracking)  
Although the VCR automatically adjusts the tracking when  
playing a tape, distortion may occur if the recording is in poor  
condition. In this case, manually adjust the tracking.  
Press TRACKING +/– to display the tracking meter. The  
distortion should disappear as you press one of the two tracking  
buttons.  
To resume automatic tracking adjustment, eject the tape and  
reinsert it.  
Tracking meter  
Note  
The auto tracking adjustment cannot be guaranteed to work with tapes recorded in the LP  
mode on other VCRs.  
44US  
Playing a tape  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Recording TV programs  
Before you start ...  
Z
• Turn on the DVD-VCR and your TV.  
When using a cable box, turn it on.  
• Set the TV to video input so that the signal  
from the player appears on the TV screen.  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
TV / DVD·VIDEO  
switch  
SELECT VIDEO  
CH +/–  
• Make sure the tape is longer than the total  
recording time.  
TV/VIDEO  
INPUT SELECT  
z REC  
SP/EP  
x STOP  
H PLAY  
DISPLAY  
Press SELECT VIDEO to control the VCR.  
1
Insert a tape with its safety tab in place.  
2
Press CH +/– to select the channel or line input video source you want to  
record.  
3
You can select a video source from the LINE IN 1 or LINE-2 IN jacks using  
the INPUT SELECT button. “L1” or “L2” appears in the display window.  
continued  
45US  
Recording TV programs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Press SP/EP to select the tape speed, SP or EP.  
4
5
EP (Extended Play) provides recording time three times as long as SP  
(Standard Play). However, SP produces better picture and audio quality.  
Press z REC to start recording.  
RECappears in the display  
window.  
To stop recording  
Press x STOP.  
To check the remaining tape length  
Press DISPLAY to display the time counter. With the display on, press DISPLAY  
again to check the remaining time. The white bar indicates the current location in  
relation to the entire tape length. The remaining time also appears. Press DISPLAY to  
turn off the indicators.  
Time counter  
Remaining tape length  
To check the remaining tape length of a tape, set Tape Lengthin the VIDEO  
FUNCTION SETUPmenu correctly (page 94).  
Maximum Recording Time  
Tape Length  
T-120  
SP  
2 hrs  
EP  
6 hrs  
8 hrs  
9 hrs  
T-160  
2 hrs 40 mins  
3 hrs  
T-180  
46US  
Recording TV programs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
To watch another TV program while recording  
Set TV / DVD·VIDEO switch to DVD·VIDEO on the remote.  
1
2
Press TV/VIDEO to display “TV” in the display window.  
If your TV is connected to the VCR using A/V connections, set the TV to the  
3 TV’s antenna input; if not, skip this step.  
Select another channel on the TV.  
4
To watch a DVD while recording  
Press SELECT DVD to control the DVD player.  
1
2
3
Press Z and place the disc on the disc tray.  
Press H PLAY.  
The disc tray closes and the DVD player starts playback. The TV screen will  
automatically change to the DVD playback screen.  
To save a recording  
To prevent accidental erasure, break  
off the safety tab as illustrated. To  
record on the tape again, cover the tab  
hole with adhesive tape.  
Safety tab  
Tips  
To select a channel, you can use the number buttons on the remote commander. Enter the  
channel number, then press ENTER.  
The display appears on the TV screen indicating information about the tape, but the  
information will not be recorded on the tape.  
If you do not want to watch TV while recording, you can turn off the TV. When using a cable  
box, make sure to leave it on.  
Notes  
The remaining tape length may not be indicated accurately for short tapes such as T-20 or  
T-30, or tapes recorded in LP mode.  
It may take up to one minute for the VCR to calculate and display the remaining tape length  
after you press DISPLAY.  
You cannot record a DVD directly to a VCR tape using your DVD-VCR.  
To watch a TV program during video recording, stop disc playback.  
47US  
Recording TV programs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Recording TV programs using the timer  
You can preset up to eight programs at a  
time.  
Z
TV / DVD·VIDEO  
switch  
SELECT VIDEO  
Before you start…  
• Check that the DVD-VCR clock is set to  
the correct time.  
• Turn on the DVD-VCR and your TV.  
When using a cable box, turn it on.  
• Set the TV to video input so that the signal  
from the player appears on the TV screen.  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
CLEAR  
TV/VIDEO  
TIMER  
INPUT SELECT  
• Insert a tape with its safety tab in place.  
Make sure the tape is longer than the total  
recording time.  
• If the DVD player is in play mode, you  
cannot display the setup menu. Stop the  
DVD playback.  
x STOP  
H PLAY  
V/v/B/b  
ENTER  
O RETURN  
Press SELECT VIDEO to control the VCR.  
1
2
Press TIMER.  
The timer programming menu appears.  
48US  
Recording TV programs using the timer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Set the channel number, start and stop times,  
date, and tape speed:  
3
4
1 Press b to select each item in turn.  
2 Press V/v to set each item.  
To correct a setting, press B to return to that  
setting and reset.  
• To record from a source connected to the  
LINE IN 1 or LINE-2 IN jacks, press INPUT SELECT or V/v to display  
“L1” or “L2” in the “CH” position.  
To record the same program every day or the same day every week, press  
v while the date is flashing. For details, see “Daily/weekly recording” on  
To use the Auto Tape Speed function, press v to display “Auto” in the  
“SPEED” position. For details, see “To use the Auto Tape Speed  
Press b to confirm the setting.  
To enter another setting, press V/v to select the next row and repeat step 3.  
Press CLEAR to cancel the setting.  
Press O RETURN to exit the menu.  
5
6
The  
indicator appears in the display window and the VCR stands by for  
recording. Timer recording will operate properly regardless if the DVD-  
VCR power is on or off.  
To record from a decoder or other source, leave the connected equipment  
switched on.  
To stop recording  
To stop the DVD-VCR while recording, press SELECT VIDEO and then press  
x STOP.  
Daily/weekly recording  
In step 3, press v to select the recording pattern. Each time you press v, the  
indication changes as shown below. Press V to change the indication in reverse order.  
the current date t Daily t Mo~Sa t Mo~Fr tSun’s t Mon’s t ..... t Sat’s  
t 1 month later t (dates count down) t the current date  
continued  
49US  
Recording TV programs using the timer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
To use the Auto Tape Speed function  
When you are recording a program in the Auto mode and the remaining tape becomes  
shorter than the recording time, the tape speed is automatically changed to EP mode.  
Note that some noise will appear on the picture when the tape speed is changed. If  
you want to keep the tape speed, select SP. To operate this function, set “Tape  
Length” in “VIDEO FUNCTION SETUP” menu correctly (page 94).  
To watch another TV program after setting the timer  
Set TV / DVD·VIDEO switch to DVD·VIDEO on the remote.  
1
2
Press TV/VIDEO to display “TV” in the display window.  
If your TV is connected to the VCR using A/V connections, set the TV to the  
3 TV’s antenna input; if not, skip this step.  
Select another channel on the TV.  
4
To watch a DVD after setting the timer  
Press SELECT DVD to control the DVD player.  
1
2
3
Press Z and place the disc on the disc tray.  
Press H PLAY.  
The disc tray closes and the DVD player starts playback. The TV screen will  
automatically change to the DVD playback screen.  
Tips  
If the indicator appears, the timer settings overlap. To check, change or cancel the timer  
If the  
indicator appears, this means that the VCR is currently recording this program.  
You can also do the following tasks while the VCR is recording:  
– Reset the counter (page 43).  
– Display tape information on the TV screen (page 46).  
You can also display the timer programming menu by first pressing SET UP, then V/v to  
select  
(PROGRAM) and pressing ENTER in step 2.  
Note  
The  
indicator flashes in the display window when you complete the timer setting with no  
tape inserted.  
50US  
Recording TV programs using the timer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Checking/changing/canceling timer  
settings  
Before you start…  
• Check that the DVD-VCR clock is set to  
the correct time.  
• Turn on the DVD-VCR and your TV.  
When using a cable box or a decoder, turn  
it on.  
SELECT VIDEO  
• Set the TV to video input so that the signal  
from the player appears on the TV screen.  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
• Insert a tape with its safety tab in place.  
Make sure the tape is longer than the total  
recording time.  
CLEAR  
TIMER  
• If the DVD player is in play mode, you  
cannot display the setup menu. Stop the  
DVD playback.  
V/v/B/b  
ENTER  
O RETURN  
Press SELECT VIDEO to control the VCR.  
1
2
Press TIMER.  
The timer programming menu appears.  
continued  
Checking/changing/canceling timer settings  
51US  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Press V/v to select setting you want to change  
3
4
or cancel.  
• To change the setting, press B/b to select  
the item you want to change, and press V/v  
to change it.  
To cancel the setting, press CLEAR.  
Press O RETURN to confirm the setting.  
Press O RETURN again to exit the menu.  
When the timer settings overlap  
The program that starts first has priority and the second program starts recording only  
after the first program has finished. If the programs start at the same time, the  
program listed first in the menu has priority.  
Program 1  
Program 2  
about 20 seconds  
will be cut off  
Program 1  
Program 2  
about 20 seconds will be cut off  
Tips  
If the indicator appears, the timer settings overlap.  
You can also display the timer programming menu by first pressing SET UP, then V/v to  
select  
(PROGRAM) and pressing ENTER in step 2.  
52US  
Checking/changing/canceling timer settings  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locking the DVD-VCR (Child Lock)  
After you have set the timer, you can lock all  
of the buttons on the DVD-VCR so that the  
settings are not canceled by mistake.  
?/1 POWER  
To lock the DVD-VCR  
When the DVD-VCR is turned on, hold down ?/1 POWER on the unit until “LOCK”  
appears in the display window. The DVD-VCR turns off and the indicator remains  
lit if there is a timer setting. The DVD-VCR will not work except for timer  
recordings.  
To unlock the DVD-VCR  
Hold down ?/1 POWER on the unit until “LOCK” disappears from the display  
window. The DVD-VCR is unlocked and turns on.  
To stop timer recording while the DVD-VCR is locked, press x. The recording stops  
and the DVD-VCR is unlocked.  
Note  
The DVD-VCR will be unlocked when:  
You stop timer recording by pressing x.  
You insert a tape.  
– The AC power cord is disconnected or power supply stops.  
53US  
Locking the DVD-VCR (Child Lock)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DVD Settings and Adjustments  
Audio Setup  
“Audio Setup” allows you to set the sound  
according to the playback and connection  
conditions.  
SET UP  
Before you start…  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
V/v/B/b  
ENTER  
Press SET UP when the DVD player is in stop  
1
mode, then press V/v to select  
(DVD),  
then press ENTER.  
Press V/v to select “Audio Setup,” then press  
2
3
ENTER.  
Press V/v to select the setup item from the displayed list:  
“Dolby Digital,” “DTS” or “Audio DRC.”  
54US  
Audio Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Press B/b to select an item.  
4
5
Press SET UP to exit the menu.  
Menu choices  
• Dolby Digital  
Selects the type of Dolby Digital signal.  
The default setting is indicated in bold print.  
D-PCM  
Select this when the player is connected to an audio component  
lacking a built-in Dolby Digital decoder.  
Dolby Digital  
Select this when the player is connected to an audio component  
with a built-in Dolby Digital decoder.  
• DTS  
Selects whether or not to output DTS signals.  
The default setting is indicated in bold print.  
Off  
Select this when the player is connected to an audio component  
lacking a built-in DTS decoder.  
On  
Select this when the player is connected to an audio component  
with a built-in DTS decoder.  
• Audio DRC (Dynamic Range Control)  
Makes the sound clear when the volume is turned down when playing a DVD that  
conforms to “Audio DRC.” This affects the output from the following jacks:  
– LINE OUT AUDIO L/R jacks  
– DIGITAL AUDIO OUT (COAXIAL) jack only when “Dolby Digital” is set to  
“D-PCM”.  
The default setting is indicated in bold print.  
Standard  
Normally select this positon.  
Wide Range  
Gives you the feeling of being at alive performance.  
Notes  
If you connect a component that does not conform to the selected audio signal, a loud noise  
(or no sound) will come out from the speakers, affecting your ears or causing the speakers to  
be damaged.  
Noise may occur in the LinearPCM double-speed audio. This is not a malfunction.  
55US  
Audio Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Screen Setup  
“Screen Setup” allows you to set the screen  
according to the playback and connection  
conditions.  
SET UP  
Before you start…  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
V/v/B/b  
ENTER  
O RETURN  
Press SET UP when the DVD player is in stop  
1
mode, then press V/v to select  
(DVD),  
then press ENTER.  
Press V/v to select “Screen Setup,” then press  
2
3
ENTER.  
Press V/v to select the setup item from the displayed list:  
“TV Type,” or “Black Level.”  
To set the “Progressive” setting, see page 58.  
56US  
Screen Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Press B/b to select an item.  
4
5
Press SET UP to exit the menu.  
Menu choices  
• TV Type  
Selects the aspect ratio of the connected TV (4:3 standard or wide).  
The default setting is indicated in bold print.  
4:3 Letter Box  
Select this when you connect a 4:3 screen TV. Displays a wide  
picture with bands on the upper and lower portions of the screen.  
4:3 Pan Scan  
Select this when you connect a 4:3 screen TV. Automatically  
displays the wide picture on the entire screen and cuts off the  
portions that do not fit.  
16:9  
Select this when you connect a wide-screen TV or a TV with a wide  
mode function.  
4:3 Letter Box  
4:3 Pan Scan  
16:9  
• Black Level  
You can enhance the black level by increasing the brightness and contrast when  
viewing DVD VIDEOs with the PROGRESSIVE indicator turned off.  
The default setting is indicated in bold print.  
Off  
Stops the increase of the contrast.  
Increases the contrast.  
On  
Notes  
Playback settings stored in the disc take priority over the “DVD SETUP” menu settings and  
not all the functions described may work.  
Depending on the DVD VIDEO, “4:3 Letter Box” may be selected automatically instead of  
“4:3 Pan Scan” or vice versa.  
continued  
57US  
Screen Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
To set the “Progressive” setting  
If your TV accepts progressive (480p) format signals, you will enjoy accurate color  
reproduction and high quality image.  
Follow step 1 and 2 on page 56, then press V/v to select  
1 “Progressive.”  
Press B/b to select “On,” then press ENTER.  
2
Follow the instructions appearing on the screen.  
3
1 Ensure your TV is (480p) Progressive Scan capable.  
2 Connect with Component Video Output jacks (red/green/  
blue connections).  
For details, see the connection B on page 30.  
3 Press B/b to select [OK] to test your video signal.  
If video signal appears OK, video connection is complete.  
4 Press ENTER.  
The PROGRESSIVE indicator on the unit lights up in orange.  
PROGRESSIVE indicator  
If picture is distorted, press O RETURN. Check the connection (page 30).  
58US  
Screen Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Press SET UP to exit the menu.  
5
To cancel the “Progressive” setting  
Select Off” in step 2.  
You can also cancel by pressing SELECT DVD and then press X on the unit  
continuously for 5 seconds or more.  
Note  
If you select progressive signal when you connect the DVD player to a TV that cannot accept  
the signal in progressive format, the image quality will deteriorate. In this case, set  
“Progressive” to “Off”.  
59US  
Screen Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the display or sound track  
language  
You can set various languages for the disc’s  
menu, sound track or subtitle.  
SET UP  
Before you start…  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
V/v/B/b  
ENTER  
Press SET UP when the DVD player is in stop  
1
mode, then press V/v to select  
(DVD) and  
press ENTER.  
Press V/v to select “Language Setup,” then  
2
3
press ENTER.  
The “LANGUAGE SET UP” menu appears.  
Press V/v to select the language setup item from the displayed list:  
“DVD Menu,” “Audio,” or “Subtitle.”  
Then press ENTER.  
60US  
Setting the display or sound track language  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Press V/v to select the desired language, then press ENTER.  
4
• DVD MENU LANGUAGE  
You can select the desired language for the  
disc’s menu.  
• AUDIO LANGUAGE  
Switches the language of the sound track.  
When you select “Original,” the language  
given priority in the disc is selected.  
• SUBTITLE LANGUAGE  
Switches the language of the subtitle  
recorded on the DVD VIDEO.  
When you select “Audio Follow,” the  
language for the subtitle changes according  
to the language you selected for the sound  
track.  
Press SET UP to exit the menu.  
5
Tip  
If you select “Others” in step 4, an additional language menu  
appears. Press V/v/B/b to select the desired language, then  
press ENTER.  
Notes  
When you select a language that is not recorded on the DVD VIDEO in step 4, one of the  
recorded languages will be automatically selected.  
Playback settings stored in the disc take priority over the DVD SETUP settings and not all the  
functions described may work.  
61US  
Setting the display or sound track language  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental Control (limiting playback by children)  
Playback of some DVD VIDEOs can be  
limited according to a predetermined level  
such as the age of the users. The “Parental  
Control” function allows you to set a  
playback limitation level.  
Number buttons  
Before you start…  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
SET UP  
H PLAY  
V/v/B/b  
ENTER  
Press SET UP when the DVD player is in stop  
1
mode, then press V/v to select  
(DVD) and  
press ENTER.  
Press V/v to select “Parental Setup,” then  
press ENTER.  
2
62US  
Parental Control (limiting playback by children)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Press b to set the parental control.  
3
• If you have not entered a password  
The display for registering a new password  
appears.  
Enter a 4-digit password using the number  
buttons.  
The display for confirming the password  
appears.  
Re-enter the password.  
• When you have already registered a  
password  
The display for entering the password appears.  
Enter a 4-digit password using the number  
buttons.  
After registering a password, if you set Use  
Password” to “No,” “PASSWORD CHECK”  
screen will not appear.  
Press V/v to select “Rating Level,” then press  
4
5
ENTER.  
Press V/v to select the level you want, then  
press ENTER.  
The options are as follows.  
Level 8 Adult y Level 7 y Level 6 y  
Level 5 y Level 4 y Level 3 y Level 2  
y Level 1 Kids Safe  
The lower the value, the stricter the limitation.  
Press SET UP to exit the menu.  
6
continued  
Parental Control (limiting playback by children)  
63US  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
To change the password  
Select “Change Password” in step 4 on page 63.  
1 The display for entering a new password appears.  
Enter a new 4-digit password using the number buttons.  
2 The display for confirming the password appears.  
Re-enter the new password.  
3
To turn off the Parental Control function  
Set “Use Password” to “No” in step 3 on page 63.  
To play a disc for which Parental Control is set  
Insert the disc, then press H PLAY.  
1 The display for entering your password appears.  
Enter your 4-digit password using the number buttons.  
2 The player starts playback.  
If you forget your password  
Turn on the DVD-VCR.  
1
2
Remove the disc and close the disc tray.  
Hold down m and M on the front panel simultaneously for 5 seconds.  
3 “Reset OK” appears on the screen.  
Turn off the DVD-VCR.  
4 The password is cleared.  
To create a new password, follow step 3 on page 63.  
5
Notes  
When you play DVD VIDEOs which do not have the Parental Control function, playback  
cannot be limited on this player.  
All the ratings higher than the level you select will be blocked.  
Write your password down and keep it in a safe place in case you forget it.  
When you clear the password, “Language” in the “OPTION SETUP” menu and all items in  
the “DVD SETUP” menu are returned to the default setting.  
64US  
Parental Control (limiting playback by children)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Additional Operations  
Using the DVD’s menu  
A DVD is divided into long sections of a  
picture or a music feature called “titles.”  
When you play a DVD VIDEO which  
contains several titles, you can select the title  
you want using the TOP MENU button.  
When you play DVD VIDEOs that allow you  
to select items such as the language for the  
subtitles and the language for the sound,  
select these items using the MENU button.  
Number buttons  
Before you start…  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
V/v/B/b  
ENTER  
MENU  
TOP MENU  
Press TOP MENU or MENU.  
1
The disc’s menu appears on the TV screen.  
The contents of the menu vary from disc to disc.  
Press V/v/B/b to select the item you want to play or change, then press  
2
ENTER.  
You can also use the number buttons to select the item.  
Note  
Depending on the DVD VIDEO, you may not be able to use the TOP MENU button or search  
a point by setting the time.  
65US  
Using the DVD’s menu  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Zooming into a scene  
You can zoom into a scene during playback  
or still mode.  
ZOOM  
To zoom into a JPEG image, see “Playing  
Before you start…  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
V/v/B/b  
ENTER  
Press ZOOM.  
1
” appears.  
Press V/v/B/b to move “ ” to the position where you want to zoom in.  
2
3
Press ENTER repeatedly to change the magnification.  
Each time you press the button, the magnification changes as shown below.  
2× t 4× t 2× t normal magnification  
Notes  
You cannot use 4× magnification when you play VIDEO CDs.  
The zoom function may not work depending on the DVD.  
66US  
Zooming into a scene  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Changing the angles  
If various angles (multi-angles) for a scene  
are recorded on the DVD VIDEO, “  
appears in the display window. This means  
that you can change the viewing angle.  
ANGLE  
B/b  
Press ANGLE during playback.  
1
2
The angle number appears on the display.  
The number after the slash indicates the total  
number of angles.  
Press B/b repeatedly to select the angle number.  
The scene changes to the selected angle.  
Note  
Depending on the DVD VIDEO, you may not be able to change the angles even if multi-  
angles are recorded on the DVD VIDEO.  
67US  
Changing the angles  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Displaying the subtitle  
If subtitles are recorded on the disc, you can  
change the subtitles or turn them on and off  
whenever you want while playing a DVD.  
SELECT DVD  
SUBTITLE  
V/v/B/b  
Press SELECT DVD to control the DVD player.  
1
2
Press SUBTITLE during playback.  
Press B/b repeatedly to select the language.  
3
Depending on the DVD, the choice of language varies.  
of the language.  
68US  
Displaying the subtitle  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Press V/v repeatedly to select “On.”  
4
To turn off the subtitles  
Select “Off” in step 4.  
Note  
Depending on the DVD, you may not be able to change the subtitles even if multilingual  
subtitles are recorded on it. You also may not be able to turn them off.  
69US  
Displaying the subtitle  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Various play mode functions (Program play,  
Shuffle play, Repeat play)  
Before you start…  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
SELECT DVD  
Notes  
The play mode is canceled when:  
– you open the disc tray  
– the player enters standby mode by pressing  
[/1.  
CLEAR  
REPEAT  
H PLAY  
V/v/B/b  
ENTER  
Creating your own program (Program play)  
You can play the contents of a disc in the order you want by arranging the order of the tracks on  
the disc to create your own program. You can program up to 20 tracks.  
To program MP3 audio tracks, see page 80.  
Press SELECT DVD to control the DVD player.  
1
2
Press REPEAT when the DVD player is in stop mode.  
70US  
Various play mode functions (Program play, Shuffle play, Repeat play)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Press B/b to select “PROGRAM”, then press ENTER.  
3
Press V/v/B/b to select the track number you want to  
4 program, then press ENTER.  
To program other tracks, repeat step 4.  
5
The programmed track numbers are displayed in the selected order.  
Press H PLAY to start program play.  
6
Program play starts.  
When the program ends, you can restart the same program again by pressing H PLAY.  
To stop program play  
Press CLEAR until “Off” appears at the upper left top of the TV screen during  
programme play.  
To change or cancel a program  
Follow steps 1 to 3 of “Creating your own program (Program play).”  
1
Press v repeatedly to select “Clear last track,” then press ENTER. Each time you  
2 press the button, the last programmed number is canceled. You can also cancel  
the last programmed number by pressing CLEAR.  
Follow step 4 for new programming.  
3
To cancel all the programmed numbers  
Follow steps 1 to 3 of “Creating your own program (Program play).”  
1
Press v repeatedly to select “Clear last track,” then press b to select “Clear all  
2 tracks” and press ENTER.  
All the programmed numbers are canceled.  
Notes  
Up to 99 tracks can be displayed.  
You cannot repeat play while in program play.  
continued  
Various play mode functions (Program play, Shuffle play, Repeat play)  
71US  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Playing in random order (Shuffle play)  
You can shuffle the playback order of tracks. Subsequent “shuffling” may produce a different  
playing order.  
To shuffle MP3 audio tracks, see page 81.  
Press SELECT DVD to control the DVD player.  
1
2
Press REPEAT when the DVD player is in stop mode.  
Press B/b to select “SHUFFLE”, then press ENTER.  
3
To return to normal play  
Press CLEAR until “Off” appears at the upper left top of the TV screen during shuffle  
play.  
Tip  
Shuffle play will stop when all the tracks are played back.  
Note  
You cannot repeat play while in shuffle play.  
72US  
Various play mode functions (Program play, Shuffle play, Repeat play)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Playing repeatedly (Repeat play)  
You can play all of the titles or tracks on a disc or a single title, chapter, or track repeatedly.  
Press SELECT DVD to control the DVD player.  
1
2
Press REPEAT during playback.  
Press REPEAT or B/b repeatedly to select the item to be repeated.  
3
When playing a DVD  
• Chapter: repeats the current chapter.  
• Title: repeats the current title on a disc.  
When playing a VIDEO CD (with PBC function off) or CD  
• Track: repeats the current track.  
• Disc: repeats all of the tracks.  
When playing a DATA CD/DATA DVD (MP3 audio)  
• FILE: repeats the current track (file).  
• DIR: repeats the current album (directory).  
• DISC: repeats the current disc.  
To return to normal play  
Select “Off” in step 3 or press CLEAR during repeat play.  
Tip  
When you press x STOP during repeat play, repeat play is canceled.  
Notes  
You cannot repeat play with DVD-RW in VR mode.  
You cannot repeat play VIDEO CDs with PBC function on. See “Playing VIDEO CDs with  
You cannot repeat play while in program play or shuffle play.  
73US  
Various play mode functions (Program play, Shuffle play, Repeat play)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Changing the sound  
When playing a DVD recorded in multiple  
audio formats (PCM, Dolby Digital, or  
DTS), you can change the audio format. If  
the DVD is recorded with multilingual  
tracks, you can also select the language.  
AUDIO  
With CDs or VIDEO CDs, you can select the  
sound from the right or left channel and listen  
to the sound of the selected channel through  
both the right and left speakers. For example,  
when playing a Karaoke VIDEO CD  
containing a song with the vocals on the right  
channel and the instruments on the left  
B/b  
channel, you can hear the instruments from  
both speakers by selecting the left channel.  
Playback  
Disc type  
instruments only  
Karaoke VIDEO CD Yes  
Karaoke DVD  
No  
Press AUDIO during playback.  
1
Press B/b repeatedly to select the desired language/audio setting.  
2
• When playing a DVD  
Depending on the DVD, the choice of language varies.  
abbreviation of the language.  
• When playing a VIDEO CD or CD  
The default setting is indicated in bold print.  
Stereo  
Left  
The standard stereo sound  
The sound of the left channel (monaural)  
The sound of the right channel (monaural)  
Right  
74US  
Changing the sound  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Notes  
To enjoy Dolby Digital or DTS effect from a LinearPCM format disc, you have to make the  
connection using DIGITAL AUDIO OUT (COAXIAL) (page 32).  
When you play a DVD with DTS sound tracks, set “DTS” to “On” in “AUDIO SETUP”  
If you set DTS audio output, you cannot select surround setting (page 76).  
You cannot perform playback quickly or slowly with sound when DTS audio output is set  
75US  
Changing the sound  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Virtual surround setting  
When you connect a stereo TV or 2 front  
speakers, SURROUND lets you enjoy surround  
sound effects by using sound imaging to create  
virtual rear speakers from the sound of the front  
speakers without using actual rear speakers.  
SURROUND  
B/b  
Press SURROUND during playback.  
1
Press B/b repeatedly to select “Surround1,” “Surround2,” “Surround3.”  
2
Surround effect increases as shown below.  
Surround1  
Surround2  
Surround3  
TV  
TV  
TV  
: Virtual speaker  
76US  
Virtual surround setting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
To cancel the setting  
Select “Off” in step 2.  
Notes  
When the playing signal does not contain a signal for the rear speakers, the surround effects  
will be difficult to hear.  
When you activate the surround effect, turn off the surround setting of the connected TV or  
amplifier (receiver).  
Make sure that your listening position is between and at an equal distance from your  
speakers, and that the speakers are located in similar surroundings.  
If you use the DIGITAL AUDIO OUT (COAXIAL) jack and set “Dolby Digital” to “Dolby  
Digital” or “DTS” to “On” in “AUDIO SETUP” menu (page 54), sound will come from your  
speakers but it will not have the surround effect.  
You cannot perform playback quickly or slowly with sound when a virtual surround effect is  
77US  
Virtual surround setting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing an MP3 audio track  
You can play back DATA CDs (CD-ROMs/  
CD-Rs/CD-RWs) or DATA DVDs (DVD-  
ROMs/DVD+RWs/DVD+Rs/DVD-RWs/  
DVD-Rs) recorded in MP3 (MPEG1 Audio  
Layer 3) format.  
Z
SELECT DVD  
Before you start…  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
REPEAT  
H PLAY  
x STOP  
V/v/B/b  
ENTER  
O RETURN  
TOP MENU  
Press SELECT DVD to control the DVD player.  
1
Press Z and place a DATA CD or DATA DVD  
on the disc tray, then press Z to close the tray.  
2
When you load a DATA CD or DATA DVD  
which contains MP3 audio tracks and JPEG  
image files, “Select a Media Type” menu  
appears.  
If you load a DATA CD or DATA DVD which  
contains only MP3 audio files, the MP3 display appears. Then you can skip  
step 3.  
78US  
Playing an MP3 audio track  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Press V/v to select “MP3”, then press  
Repeat mode  
Elapsed playing time  
3
ENTER.  
The first track starts playing. Press x STOP if  
necessary.  
Press O RETURN, then press V/v to select  
the desired directory in the left column, then  
press ENTER.  
4
5
Press V/v to select the desired track in the  
right column, then press ENTER.  
The selected track starts playing.  
When a track or album is being played, the title  
is shown in a box. The playing track number  
appears on the display window.  
To stop play  
Press x STOP.  
To repeat play  
Press REPEAT repeatedly during playback to change the repeat mode.  
• FILE: repeats the current track (file).  
• DIR: repeats the current album (directory).  
• DISC: repeats the current disc.  
To go to the next or previous page  
Press b or B.  
To return to the previous display  
Press O RETURN.  
To return to the “Select a Media Type” menu  
Press x STOP twice, then press TOP MENU.  
continued  
Playing an MP3 audio track  
79US  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To turn off the display  
Press x STOP twice, then press O RETURN repeatedly.  
Notes  
Only the letters in the alphabet and numbers can be used for album or track names. Anything  
else is displayed as an asterisk.  
Up to 12 alphanumeric characters can be displayed for album or track names.  
ID3 tags cannot be displayed.  
You cannot repeat play while in program play or shuffle play.  
To program MP3 audio tracks  
Press x STOP twice, then press REPEAT.  
1
Press B/b to select “PROGRAM,” then press ENTER.  
2
Press V/v to select the desired directory in the left column,  
3 then press ENTER.  
Press V/v to select the track you want to program, then press  
4 ENTER.  
To program other tracks, repeat step 4.  
5
The programmed tracks are displayed in the selected order. Press CLEAR to cancel the last  
programmed track.  
Press H PLAY to start program play.  
6
Program play starts. When the program ends, you can restart the same program again by  
pressing H PLAY.  
80US  
Playing an MP3 audio track  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
To stop program play  
Press x STOP during program play.  
To return to normal play  
Press CLEAR during program play.  
Notes  
Up to 20 tracks can be programmed at one time.  
You cannot repeat play while in program play.  
To shuffle MP3 audio tracks  
Press REPEAT when the MP3 is in stop mode.  
1
2
Press B/b to select “SHUFFLE,” then press ENTER.  
To return to normal play  
Press CLEAR during shuffle play.  
Tip  
Shuffle play will stop when all the tracks are played back.  
Note  
You cannot repeat play while in shuffle play.  
About MP3 audio tracks  
You can play back DATA CDs (CD-ROMs/CD-Rs/CD-RWs) or DATA DVDs  
(DVD-ROMs/DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs) recorded in MP3 (MPEG-1 Audio  
Layer III) format. However, the discs must be recorded according to ISO9660 Level 1/Level 2  
or Joliet format and DATA DVDs of Universal Disk Format (UDF) for the player to recognize  
the tracks (or files). You can also play DATA CDs or DATA DVDs recorded in Multi Session or  
Refer to the instructions supplied with the CD-R/CD-RW/DVD-R/DVD-RW drives and the  
recording software (not supplied) for details on the recording format.  
Note on Multi Session/Border discs  
If MP3 audio tracks are recorded in the first session/border, the player will also play  
MP3 audio tracks in other session/border. If audio tracks and images in Music CD  
format or Video CD format are recorded in the first session/border, only the first  
session/border will be played back.  
continued  
81US  
Playing an MP3 audio track  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Notes  
If you put the extension “.MP3” to data not in MP3 format, the player cannot recognize the  
data properly and will generate a loud noise which could damage your speaker system.  
The player cannot play audio tracks in MP3PRO format.  
The player may not be able to play some DATA CDs/DATA DVDs created in the Packet  
Write format.  
If both video data and MP3 audio tracks exist on a DATA DVD, the player recognizes only  
the video data.  
This player supports MP3 audio tracks recorded with a bit rate of 128 kbps and a sampling  
frequency of 44.1 kHz. Attempting to play MP3 audio tracks recorded with different  
specifications may result in loud noise, sound skipping or speaker damage.  
Depending on the disc contents, playback may take some time to start.  
The Playback order of MP3 audio tracks  
The playback order of albums and tracks recorded on a DATA CD or DATA DVD is  
as follows.  
• Structure of disc contents  
Tree 1 Tree 2 Tree 3 Tree 4 Tree 5  
album  
track  
When you insert a DATA CD or DATA DVD and press H PLAY, the numbered  
tracks are played sequentially, from 1 through 7. Any sub-albums/tracks contained  
within a currently selected album does not take priority over the next album in the  
same tree. (Example: E contains G but 6 is played before 7.)  
When you press O RETURN and the list of MP3 albums appears (page 79), the  
albums are arranged in the following order: A t B t D t E t F t G.  
Albums that do not contain tracks (such as album C) do not appear in the list.  
82US  
Playing an MP3 audio track  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tips  
If you add numbers (01, 02, 03, etc.) to the front of the track file names, the tracks will be  
played in that order.  
A disc with many trees takes longer to start playback. Some discs with many trees cannot be  
played back.  
Notes  
Depending on the software you use to create the DATA CD or DATA DVD, the playback  
order may differ from the illustration above.  
The playback order above may not be applicable if there are more than a total of 1000 albums  
and tracks in the DATA CD or DATA DVD.  
A total of up to 999 files can be recognized for discs that contain both MP3 and JPEG files.  
Files are recognized in the order that they were recorded. For example, if 990 JPEG files are  
recorded then 100 MP3 files are recorded, the 990 JPEG files recorded first and only the first  
9 MP3 files can be recognized.  
Depending on the disc contents, playback may take some time to start.  
83US  
Playing an MP3 audio track  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing JPEG image files  
You can play JPEG image files on DATA CDs  
(CD-ROMs/CD-Rs/CD-RWs) or DATA DVDs  
(DVD-ROMs/DVD+RWs/DVD+Rs/DVD-  
RWs/DVD-Rs).  
Z
SELECT DVD  
Before you start…  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
./ >  
H PLAY  
x STOP  
V/v/B/b  
ENTER  
MENU  
TOP MENU  
DISPLAY  
Press SELECT DVD to control the DVD player.  
1
Press Z and place a DATA CD or DATA DVD  
on the disc tray, then press Z to close the tray.  
2
When you load a DATA CD or DATA DVD  
which contains MP3 audio tracks and JPEG  
image files, “Select a Media Type” menu  
appears.  
If you load a DATA CD or DATA DVD which  
contains only JPEG image files, the “Album” display appears. Then you can  
skip step 3.  
84US  
Playing JPEG image files  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Press V/v to select “JPEG”, then press  
3
4
ENTER.  
The “Album” display will appears.  
If you do not press ENTER after selecting a  
media type, the selected media will be  
automatically played.  
Press ./> to select the next/previous album page, then press V/v/  
B/b to select an image in the “Album” display.  
To display the selected image  
1
Press ENTER.  
The selected image number appears in the  
display window.  
2
To display the next/previous image, press  
./>.  
To play the Slide show  
: Fast  
: Normal  
1
Press H PLAY.  
: Slow  
You can also play the Slide show using the  
menu on the selected image.  
2
Press B/b to select the desired playing  
speed on the “Interval” menu, then press  
ENTER.  
Slide show starts from the selected image.  
To rotate the selected image  
Press V/v/B/b to select an image in the “Album”  
1 display, then press ENTER.  
Press B/b to select “  
”, then press ENTER.  
2
Each time you press ENTER, the image turns  
clockwise by 90°.  
continued  
85US  
Playing JPEG image files  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To zoom in an image  
Press V/v/B/b to select an image in the “Album”  
1 display, then press ENTER.  
Press B/b to select “  
”, then press ENTER.  
2
” appears.  
Press V/v/B/b to move “  
” to the position  
3
where you want to zoom in.  
Press ENTER repeatedly to change the  
4 magnification. Each time you press ENTER, the  
magnification changes as shown below.  
2× t normal magnification  
Note  
You cannot use ZOOM on the remote in JPEG image files on DATA CD/DATA DVD.  
To enjoy the Slide show  
Press V/v/B/b to select an image in the “Album”  
1 display, then press ENTER.  
Press B/b to select “  
”, then press ENTER.  
2
The “Interval” menu appears.  
Press B/b to select the desired play speed, then press  
3 ENTER.  
Slide show starts.  
To turn on/off the menu in the single image display  
Press CLEAR to turn off the menu. Press B or b to turn on the menu.  
To return to the “Album” display  
Press MENU to return to the “Album” display. Press . repeatedly to return to the  
first “Album” page.  
To return to the “Select a Media Type” menu  
Press x STOP twice, then press TOP MENU.  
Notes  
Slide show can play in only one direction.  
You cannot rotate or zoom in the image during Slide show.  
If you select “  
in the rotated image display, the images in the “Album” display will not  
be rotated. But if you start the slide show, the images will be rotated. Correct the rotation in  
the “  
menu.  
86US  
Playing JPEG image files  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
About JPEG image files  
You can play back DATA CDs (CD-ROMs/CD-Rs/CD-RWs) or DATA DVDs (DVD-ROMs/  
DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs) recorded in JPEG format. However, the discs must  
be recorded according to ISO9660 Level 1/Level 2 or Joliet format and DATA DVDs of  
Universal Disk Format (UDF) for the player to recognize the tracks (or files). You can also play  
DATA CDs or DATA DVDs recorded in Multi Session or Multi Border (see “Note on Multi  
Refer to the instructions supplied with the CD-R/CD-RW/DVD-R/DVD-RW drives and the  
recording software (not supplied) for details on the recording format.  
Notes  
If both video data and JPEG image files exist on a DATA DVD, the player recognizes only  
the video data.  
A total of up to 999 files can be recognized for discs that contain both MP3 and JPEG files.  
Files are recognized in the order that they were recorded. For example, if 990 JPEG files are  
recorded then 100 MP3 files are recorded, the 990 JPEG files recorded first and only the first  
9 MP3 files can be recognized.  
Note on Multi Session/Border discs  
If JPEG image files are recorded in the first session/border, the player will also play  
JPEG image files in other session/border. If audio tracks and images in Music CD  
format or Video CD format are recorded in the first session/border, only the first  
session/border will be played back.  
Tip  
If you add numbers (01, 02, 03, etc.) to the front of the file names, the files will be played in  
that order.  
Notes  
This player can play JPEG image files with the extension “.JPEG” or “.JPG.”  
Some DATA CDs or DATA DVDs cannot be played on this system depending on file format.  
The player may not be able to play some DATA CDs/DATA DVDs created in the Packet  
Write format.  
If you add the extension “.JPG” or “.JPEG” to data not in JPEG format, “Can not Display”  
will appear.  
Depending on the disc or the size of image files, playback may take some time to start.  
Progressive and lossless compression JPEG image files are not supported.  
The image size that can be displayed is limited. You can display the following images;  
width 32 - 7680 pixels by height 32 - 8192 pixels.  
87US  
Playing JPEG image files  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Playing VIDEO CDs with “PBC ON/OFF”  
Functions  
The PBC (Playback control) function allows  
you to search and perform other operations  
interactively. PBC playback follows a selection  
menu displayed on your TV screen.  
Before you start…  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
Number buttons  
V/v  
ENTER  
O RETURN  
MENU  
Press MENU to select “PBC ON.”  
1
2
The menu for your selection appears.  
Press V/v to select the item number you want.  
You can also use the number buttons to select the item number and track.  
88US  
Playing VIDEO CDs with “PBC ON/OFF” Functions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Press ENTER.  
3
4
Follow the instructions in the menu for interactive operations.  
Refer to the instructions supplied with the disc, as the operating procedure  
may differ depending on the VIDEO CD.  
To return to the menu  
Press O RETURN.  
To play using “PBC OFF”  
Press MENU to select “PBC OFF.”  
When “PBC OFF” is selected, the DVD player starts continuous play. You cannot play still  
pictures such as a menu.  
To return to “PBC ON,” press MENU to select “PBC ON.”  
Note  
Depending on the VIDEO CD, “Press ENTER” in step 3 may appear as “Press SELECT” in  
the instructions supplied with the disc. In this case, press H PLAY.  
89US  
Playing VIDEO CDs with “PBC ON/OFF” Functions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR Additional Operations  
Quick Timer Recording  
After you have started recording, you can  
have the VCR stop recording automatically  
after a specified duration.  
z REC  
x STOP  
While recording, press z REC.  
1
Press z REC repeatedly to set the duration time.  
2
Each press advances the time as follows.  
Normal recording  
0:30  
1:00  
1:30  
4:00  
The tape counter decreases minute by minute to 0:00, then the VCR stops recording.  
To extend the duration  
Press z REC repeatedly to set a new duration time.  
To cancel the duration  
Press z REC repeatedly until the indicator disappears and the VCR returns to  
normal recording mode.  
To stop while recording  
Press x STOP.  
Note  
You cannot display the current tape time in the display window when setting the recording  
duration time.  
90US  
Quick Timer Recording  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Recording stereo and bilingual programs  
Recording stereo programs  
When you receive a program broadcast in stereo, press AUDIO to display “Hi-Fi” on the TV  
screen. You can also select “Left,” “Right,” or “Mono.” If there is noise in the stereo program,  
select “Mono.” The sound will be recorded in monaural (on both hi-fi and normal audio tracks)  
but with less noise.  
Recording bilingual programs  
Press AUDIO to display “SAP” on the TV screen. When a SAP (Second Audio Program) is  
received, “SAP” appears on the TV screen. When “MAIN” is selected, the VCR records only  
the main sound.  
Selecting the sound during playback  
During playback, press AUDIO to select the sound you want.  
To listen to  
Stereo  
On-screen display  
Display window  
STEREO indicator  
STEREO indicator  
STEREO indicator  
No indicator  
Hi-Fi  
Left  
Left channel  
Right channel  
Right  
Monaural sound on the normal audio track Mono  
How sound is recorded on a video tape  
The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the main track  
along with the picture. Monaural sound is recorded onto the normal audio track along the edge  
of the tape.  
Monaural sound  
Normal audio track  
Hi-fi audio track  
(main track)  
Stereo sound  
(left/right channels)  
Notes  
To play a tape in stereo, you must use the A/V connections.  
When you play a tape recorded in monaural, the sound is heard in monaural regardless of the  
AUDIO setting.  
91US  
Recording stereo and bilingual programs  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
Searching using various functions  
The VCR automatically marks the tape with  
an index signal at the point where each  
recording begins.  
You can easily find a specific point using  
various search functions.  
SELECT VIDEO  
SEARCH  
H PLAY  
V/v/B/b  
Press SELECT VIDEO to control the VCR.  
1
Insert an indexed tape into the VCR.  
Press SEARCH.  
2
3
92US  
Searching using various functions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
• Scan and Play (To search using the index  
function):  
4
1 Press b to scan ahead, or B to scan  
backwards.  
The VCR searches and then plays back for  
about five seconds.  
2 Press H PLAY to view the program.  
If you do not press H PLAY, the VCR  
automatically searches for the next index  
mark, or until it reaches the end of the tape.  
• Go to [0:00:00] (To search for the counter  
0:00:00 point):  
Press V.  
The VCR starts searching and automatically  
stops at the 0:00:00 point.  
To mark a point on the tape that you want to  
find later, press CLEAR to reset the tape  
counter to “0:00:00.”  
• End search (To search for a blank portion of  
the tape)  
Press v.  
The VCR starts searching and automatically  
stops at the beginning of a blank space. If no  
blank space is found, the VCR reaches the end.  
Note  
Once in recording mode, if the VCR is put in pause and then released to start the recording,  
no index mark will be inserted. An index mark will be inserted if the channel is changed  
while VCR is put in pause.  
93US  
Searching using various functions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Changing menu options  
You can change the tape length, auto play  
and auto repeat settings. Normally the default  
settings are used. Change these settings if  
necessary.  
SET UP  
Before you start…  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
V/v/B/b  
ENTER  
Press SET UP when the DVD player is in stop  
mode.  
1
2
3
Press V/v to select  
ENTER.  
(VIDEO) and press  
Press V/v to select the option to change.  
94US  
Changing menu options  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Press B/b to change the setting.  
4
5
Press SET UP to exit the menu.  
Menu choices  
The default settings are indicated in bold print.  
Menu option  
Set this option to  
Tape Length  
T-120 when using a T-120 or shorter length tape.  
T-160 when using a T-160 length tape.  
T-180 when using a T-180 or longer length tape.  
Auto Play  
On to start playback automatically, when you insert a tape with  
its safety tab removed.  
Off to turn off Auto play. You need to press H PLAY to start  
playback, even if you insert a tape with its safety tab removed.  
Auto Repeat  
On to play back a tape repeatedly. The VCR rewinds a tape to  
the beginning and restarts playback automatically.  
Off to turn off Auto repeat.  
95US  
Changing menu options  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Editing with another VCR  
How to connect to record on this VCR  
This VCR (Recorder)  
TV  
LINE-2 IN  
Other VCR (Player)  
LINE OUT  
Audio/video cord  
(not supplied)  
: Signal flow  
Notes  
Make sure you connect the plugs to jacks of the same color.  
If the other VCR is a monaural type and connected to this VCR’s LINE-2 IN jacks, connect  
the audio plug to the AUDIO L (white) jack. The sound is recorded on both right and left  
channels. If you connect to the AUDIO R (red) jack, the sound is recorded only on the right  
channel.  
If you connected this VCR to both the LINE IN and LINE OUT jacks of the other VCR,  
select the input correctly to prevent a humming noise.  
You can use the LINE IN 1 jacks for editing. If the other VCR is a monaural type the sound is  
recorded only on the channel whose jack is connected to the audio plug. To record on both  
right and left channels, connect the audio plugs to the AUDIO L/R jacks using an audio/video  
cord (not supplied).  
96US  
Editing with another VCR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Operation (when recording on this VCR)  
Before you start editing  
x
• Turn on the VCR and the TV and set it to  
the video channel.  
• Press INPUT SELECT to display “L1” or  
“L2” in the display window.  
• Press SP/EP to select the tape speed, SP or  
EP.  
X z REC  
Insert a source tape with its safety tab removed into the other (playback) VCR. Search for  
1 the point to start playback and set it to playback pause.  
Insert a tape into this (recording) VCR. Search for the point to start recording and press X.  
2
3
4
Press z REC on this VCR to set it to recording pause.  
To start editing, press the X (pause) buttons on both VCRs at the same time.  
To stop editing  
Press the x (stop) buttons on both VCRs.  
Tip  
To cut out unwanted scenes while editing, press X on this VCR when an unwanted scene  
begins. When it ends, press X again to resume recording.  
97US  
Editing with another VCR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
General setup information  
Before you start…  
SET UP  
• Set TV / DVD·VIDEO switch to  
DVD·VIDEO on the remote.  
V/v/B/b  
ENTER  
Press SET UP when the DVD player is in stop  
mode, then press V/v to select  
(OPTION), then press ENTER.  
1
Press V/v to select the option to change.  
2
Press B/b to change the setting.  
3
When changing the “RF Output Channel,” confirmation messages will  
appear. Press ENTER to confirm the messages.  
98US  
General setup information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Press SET UP to exit the menu.  
4
Menu choices  
The default settings are indicated in bold print.  
Menu option  
Set this option to  
Auto Power Off  
Off” to deactivate the Auto Power Off function.  
“1Hr”/“2Hr” to turn the DVD-VCR off automatically if no  
signal is received and you do not press any of the buttons  
during this time.  
RF Output Channel  
3CH” when using channel 3 to receive the VCR signal.  
“4CH” when using channel 4 to receive the VCR signal.  
For details, see page 99.  
Setting the RF Output channel  
When connecting the DVD-VCR to the TV  
using only the antenna cable, you must set  
the RF Output channel in the “OPTION  
SETUP” menu so that the TV can receive the  
correct signal from the DVD-VCR.  
?/1  
CH +/–  
TV/VIDEO  
Set the RF Output channel to “3CH” or “4CH” (see page 98 to set the channel), whichever  
1 channel is not used in your area. If both are used, set the switch to either channel.  
Press ?/1 to turn on the DVD-VCR.  
2
Press TV/VIDEO to turn on “VIDEO” in the  
3 DVD-VCR’s display window.  
Press CH +/– to display a channel number in the display window.  
4
Select an active channel number in your area.  
continued  
99US  
General setup information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Turn on your TV and set it to the channel you selected in step 1 (3CH or 4CH).  
5
The channel you selected in step 4 appears on the TV screen. If the channels change when  
you press CH +/–, you have made the correct setting.  
Whenever you use the DVD-VCR, set the TV to the channel selected in step 1.  
Attaching the external antenna connector  
When using a 300-ohm twin lead cable for a  
VHF/UHF antenna, use an antenna connector  
(not supplied) to connect the antenna to the  
DVD-VCR.  
300-ohm twin  
lead cable  
Antenna  
connector  
(not supplied)  
Loosen the screws on the antenna connector.  
1
2
3
Wind the twin leads around the screws on the antenna connector.  
Retighten the screws.  
Attaching a VHF/UHF band mixer  
When using both a 75-ohm coaxial cable and a  
300-ohm twin lead cable for a VHF/UHF  
antenna, use a VHF/UHF band separator/mixer  
(not supplied) to connect the antenna to the  
DVD-VCR.  
300-ohm twin  
lead cable  
VHF/UHF  
band  
separator/  
mixer (not  
supplied)  
75-ohm coaxial cable  
Loosen the screws on the mixer.  
1
Wind the twin leads around the screws on the mixer.  
Retighten the screws.  
2
3
4
Connect the 75-ohm coaxial cable to the mixer.  
100US  
General setup information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Troubleshooting  
If you have any questions or problems not covered below, please consult your nearest Sony  
dealer. (For customers in USA)  
General Troubleshooting  
Symptom  
Remedy  
The ?/1 switch does not function.  
Connect the AC power cord securely.  
The power is turned on but the DVD-  
VCR does not operate.  
Moisture condensation has occurred. Turn the power off,  
unplug the AC power cord and leave the DVD-VCR to  
dry for over three hours.  
The clock has stopped and “–:–”  
appears in the display window.  
The clock stops if the DVD-VCR is disconnected from  
the wall outlet. Reset the clock (and timer).  
The remote commander does not  
function.  
Make sure you are pointing the remote commander at the  
remote sensor on the DVD-VCR.  
Replace all the batteries in the remote commander with  
new ones if they are weak.  
Make sure the TV / DVD·VIDEO switch is set correctly.  
Select correctly VIDEO or DVD with the SELECT DVD/  
VIDEO button.  
The tracking meter does not appear  
on the screen.  
The recording condition of the tape is very poor and  
tracking cannot be adjusted.  
continued  
101US  
Troubleshooting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
DVD Troubleshooting  
Symptom  
Remedy  
There is no picture/picture noise  
appears.  
Re-connect the connecting cord securely.  
The connecting cords are damaged.  
Check the connection to your TV (page 14) and switch  
the input selector on your TV so that the signal from the  
player appears on the TV screen.  
The disc is dirty or flawed.  
If the picture output from your player goes through your  
VCR to get to your TV or if you are connected to a  
combination TV/VIDEO player, the copy-protection  
signal applied to some DVD programs could affect  
picture quality. If you still experience problems even  
when you connect your player directly to your TV, please  
try connecting your player to your TV’s S-VIDEO input  
You have set the player to progressive format (the  
PROGRESSIVE indicator lights up in orange) even  
though your TV cannot accept the progressive signal. In  
this case, set “Progressive” to “Off” (page 58).  
Even if your TV is compatible with progressive format  
(480p) signals, the image may be affected when you set  
the player to progressive format. In this case, set  
“Progressive” to “Off” and the player is set to normal  
(interlace) format (page 58).  
COMPONENT VIDEO OUT jack is not used or  
“Progressive” of the “SCREEN SETUP” menu is not set  
correctly while the PROGRESSIVE indicator lights up in  
orange. Check the setting (page 56) and connection  
Even though you set the aspect ratio  
in “TV Type” of the “SCREEN  
SETUP” menu the picture does not  
fill the screen.  
The aspect ratio of the disc is fixed on your DVD.  
There is no picture from your VCR  
connected to the LINE IN jacks.  
The DVD player must be in standby mode to view  
pictures from your VCR.  
There is no sound.  
Re-connect the connecting cord securely.  
The connecting cord is damaged.  
The player is connected to the wrong input jack on the  
amplifier (receiver) (page 15).  
The amplifier (receiver) input is not correctly set.  
The player is in pause mode or in Slow-motion Play mode.  
The player is in fast forward or fast reverse mode.  
If the audio signal does not come through the DIGITAL  
AUDIO OUT (COAXIAL) jack, check the audio settings  
Sound is noisy.  
When playing a CD with DTS sound tracks, noise will  
come from the LINE OUT L/R (AUDIO) jacks (page 37)  
or DIGITAL AUDIO OUT (COAXIAL) jack.  
The sound volume is low.  
The sound volume is low on some DVDs. The sound  
volume may improve if you set “Audio DRC” to “Wide  
Range” (page 55).  
102US  
Troubleshooting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Remedy  
The disc does not play.  
The disc is turned over.  
Insert the disc with the playback side facing down on the  
disc tray.  
The disc is skewed.  
The player cannot play certain discs (page 7).  
The region code on the DVD does not match the player.  
Moisture has condensed inside the player (page 3).  
The player cannot play a recorded disc that is not  
correctly finalized (page 8).  
Make sure the TV / DVD·VIDEO switch is set correctly.  
Select correctly VIDEO or DVD with SELECT DVD/  
VIDEO button.  
The MP3 audio track cannot be  
The DATA CD or DATA DVD is not recorded in the MP3  
format that conforms to ISO9660 Level 1/Level 2 or UDF.  
The MP3 audio track does not have the extension “.MP3.”  
The data is not formatted in MP3 even though it has the  
extension “.MP3.”  
The data is not MPEG1 Audio Layer 3 data.  
The player cannot play audio tracks in MP3PRO format.  
The JPEG image file cannot be  
played.  
The DATA CD or DATA DVD is not recorded in JPEG  
format that conforms to ISO9660 Level 1/Level 2 or UDF.  
The JPEG image file does not have the extension “.JPG”  
or “.JPEG.”  
The data is not formatted in JPEG even though it has the  
extension “.JPG” or “JPEG.”  
Length or width of the image is more than 4720 dots.  
The title of the MP3 audio album/  
track or JPEG image album/file is not  
correctly displayed.  
The player can only display numbers and alphabet. Other  
characters are displayed as asterisks.  
The disc does not start playing from  
the beginning.  
Program play, shuffle play, or repeat play, has been  
selected (pages 70, 72, 73).  
Resume play has taken effect (page 37).  
The player starts playing the disc  
automatically.  
The disc features an auto playback function.  
Playback stops automatically.  
While playing discs with an auto pause signal, the player  
stops playback at the auto pause signal.  
You cannot perform some functions  
such as stop, search, slow-motion  
play, repeat play, shuffle play, or  
program play.  
Depending on the disc, you may not be able to do some  
operations. See the operating manual that comes with the  
disc.  
The language for the sound track  
cannot be changed.  
Try using the DVD’s menu instead of the direct selection  
button on the remote (page 65).  
Multilingual tracks are not recorded on the DVD being  
played.  
The DVD prohibits the changing of the language for the  
sound track.  
continued  
103US  
Troubleshooting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Remedy  
The subtitle language cannot be  
changed or turned off.  
Try using the DVD’s menu instead of the direct selection  
button on the remote (page 65).  
Multilingual subtitles are not recorded on the DVD being  
played.  
The DVD prohibits the changing of the subtitles.  
The angles cannot be changed.  
Try using the DVD’s menu instead of the direct selection  
button on the remote (page 65).  
Multi-angles are not recorded on the DVD being played.  
The DVD prohibits changing of the angles.  
The player does not operate properly.  
When static electricity, etc., causes the player to operate  
abnormally, unplug the player.  
VCR Troubleshooting  
Symptom  
Remedy  
The playback picture does not appear  
on the TV screen.  
Make sure the TV is set to the channel for the VCR. If  
you are using a monitor, set it to video input.  
The picture is not clear.  
Adjust the tracking with the TRACKING +/– buttons.  
The video heads are dirty (see “On cleaning the video  
heads” (page 3)). Clean the video heads using a Sony  
video head cleaning cassette. If a Sony cleaning cassette  
is not available in your area, have the heads cleaned at  
your nearest Sony dealer (a standard service fee will be  
charged). Do not use a commercially available liquid type  
cleaning cassette, as it may damage the video heads.  
The video heads may have to be replaced. Consult your  
local Sony dealer for more information.  
The picture rolls vertically during  
picture search.  
Adjust the vertical hold control on the TV or monitor.  
The picture has no sound.  
The tape is defective.  
If you made A/V connections, check the audio cord  
connection.  
A TV program does not appear on  
the TV screen.  
Make sure the TV is set to the channel for the VCR. If  
you are using a monitor, set it to video input.  
Select the correct source with the INPUT SELECT or  
CH +/– buttons. Select a channel number when recording  
TV programs; select “L1” or “L2” when recording from  
other equipment.  
TV reception is poor.  
Adjust the TV antenna.  
The tape starts playing as soon as it is  
inserted.  
The safety tab has been removed. To record on this tape,  
cover the tab hole.  
The tape is ejected when you press  
z REC.  
Check that the safety tab has not been removed.  
Nothing happens when you press  
Make sure the tape is not at its end.  
z REC.  
104US  
Troubleshooting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Remedy  
The timer does not operate.  
Check that the clock is set.  
Make sure a tape has been inserted.  
Check that the safety tab has not been removed.  
Make sure the tape is not at its end.  
Make sure a program has been set for timer recording.  
Make sure your timer settings are past the current time.  
Check that the cable box is turned on.  
The clock stops if the DVD-VCR is disconnected from  
the wall outlet for more than one minute. Reset the clock  
and timer.  
Turn the power off and unplug the AC power cord.  
A tape cannot be inserted.  
Check that a tape is not already in the tape compartment.  
Control by AV mouse is not possible.  
The unit is not compatible with satellite TV receiver AV  
mouse, etc.  
105US  
Troubleshooting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Glossary  
Chapter (page 38)  
Sections of a picture or a music feature that  
are smaller than titles. A title is composed of  
several chapters. Depending on the disc, no  
chapters may be recorded.  
A disc that contains up to 8 hours of moving  
pictures even though its diameter is the same  
as a CD.  
The data capacity of a single-layer and  
single-sided DVD is 4.7 GB (Giga Byte),  
which is 7 times that of a CD. The data  
capacity of a double-layer and single-sided  
DVD is 8.5 GB, a single-layer and double-  
sided DVD is 9.4 GB, and double-layer and  
double-sided DVD is 17GB.  
The picture data uses the MPEG 2 format,  
one of the worldwide standards of digital  
compression technology. The picture data is  
compressed to about 1/40 (average) of its  
original size. The DVD also uses a variable  
rate coding technology that changes the data  
to be allocated according to the status of the  
picture. Audio information is recorded in a  
multi-channel format, such as Dolby Digital,  
allowing you to enjoy a more real audio  
presence.  
Dolby Digital (pages 32 and 55)  
Digital audio compression technology  
developed by Dolby Laboratories. This  
technology conforms to 5.1-channel  
surround sound. The rear channel is stereo  
and there is a discrete subwoofer channel in  
this format. Dolby Digital provides the same  
5.1 discrete channels of high quality digital  
audio found in Dolby Digital cinema audio  
systems. Good channel separation is realized  
because all of the channel data are recorded  
discretely and little deterioration is realized  
because all channel data processing is digital.  
Dolby Surround (page 33)  
Audio signal processing technology that  
Dolby Laboratories developed for surround  
sound. When the input signal contains a  
surround component, the process outputs the  
front, center and rear signals. The rear  
channel is monaural.  
Furthermore, various advanced functions  
such as the multi-angle, multilingual, and  
Parental Control functions are provided with  
the DVD.  
A DVD+R (read “plus R”) is a recordable  
disc that is the same size as a DVD VIDEO.  
Contents can be recorded only once to a  
DVD+R, and will have the same format as a  
DVD VIDEO.  
Digital audio compression technology that  
Digital Theater Systems, Inc. developed.  
This technology conforms to 5.1-channel  
surround sound. The rear channel is stereo  
and there is a discrete subwoofer channel in  
this format. DTS provides the same 5.1  
discrete channels of high quality digital  
audio.  
Good channel separation is realized because  
all of the channel data is recorded discretely  
and little deterioration is realized because all  
channel data processing is digital.  
A DVD-R is a recordable disc that is the  
same size as a DVD VIDEO. Contents can be  
recorded only once to a DVD-R, and will  
have the same format as a DVD VIDEO.  
The DVD-R has two different modes:  
VR mode and Video mode. DVDs created in  
Video mode have the same format as a DVD  
VIDEO, while discs created in VR (Video  
Recording) mode allow the contents to be  
programmed or edited.  
106US  
Glossary  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
A DVD-RW is a recordable and rewritable  
disc that is the same size as a DVD VIDEO.  
The DVD-RW has two different modes:  
VR mode and Video mode. DVD-RWs  
created in Video mode have the same format  
as a DVD VIDEO, while discs created in VR  
(Video Recording) mode allow the contents  
to be programmed or edited.  
A DVD+RW (plus RW) is a recordable and  
rewritable disc. DVD+RWs use a recording  
format that is comparable to the DVD  
VIDEO format.  
Interlace format  
Interlace format shows every other line of an  
image as a single “field” and is the standard  
method for displaying images on television.  
The even number field shows the even  
numbered lines of an image, and the odd  
numbered field shows the odd numbered  
lines of an image.  
Progressive format (pages 31 and 58)  
Compared to the Interlace format that  
alternately shows every other line of an  
image (field) to create one frame, the  
Progressive format shows the entire image at  
once as a single frame. This means that while  
the Interlace format can show 30 frames/60  
fields in one second, the Progressive format  
can show 60 frames in one second. The  
overall picture quality increases and still  
images, text, and horizontal lines appear  
sharper. This player is compatible with the  
480 progressive format.  
The longest section of a picture or music  
feature on a DVD, movie, etc., in video  
software, or the entire album in audio  
software.  
Sections of a picture or a music feature on a  
CD or VIDEO CD (the length of a song).  
107US  
Glossary  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Specifications  
COMPONENT VIDEO OUT (Y, Pb, Pr)  
Phono jack  
Y: 1.0 Vp-p/Pb, Pr: 0.7 Vp-p, 75 ohms  
S-VIDEO OUT  
System  
Laser  
Semiconductor laser  
Format  
VHS NTSC standard  
Video recording system  
Rotary head helical scanning FM system  
Video heads  
4-pin, mini-DIN jack  
Y: 1.0 Vp-p, unbalanced, sync negative  
C: 0.286 Vp-p, load impedance 75 ohms  
Timer section  
Clock  
Double azimuth four heads  
Video signal  
Quartz locked  
Timer indication  
12-hour cycle  
Timer setting  
8 programs (max.)  
NTSC color, EIA standards  
Tape speed  
3
SP: 33.35 mm/s (1  
inches/s)  
8
EP: 11.12 mm/s ( 7 inches/s)  
16  
LP: 16.67 mm/s ( 11 inches/s),  
16  
playback only  
General  
Power requirements  
120 V AC, 60 Hz  
Power consumption  
25 W  
Maximum recording/playback time  
8 hrs. in EP mode (with T-160 tape)  
Rewind time  
Approx. 1 min (with T-120 tape)  
Power back-up  
Tuner section  
Back-up duration: 0 min  
Operating temperature  
0°C to 45°C (32°F to 113°F)  
Storage temperature  
–20°C to 60°C (–4°F to 140°F)  
Operating humidity  
25% to 80%  
Channel coverage  
VHF 2 to 13  
UHF 14 to 69  
CATV A-8 to A-1, A to W, W+1 to W+84  
Antenna  
75-ohm antenna terminal for VHF/UHF  
Dimensions including projecting parts and controls  
(w/h/d)  
Inputs and outputs  
LINE IN 1 and LINE-2 IN  
Approx. 430 × 85 × 287 mm  
3
3
(Approx. 17 × 3  
Mass  
Approx. 3.6 kg (Approx. 7.9 lbs)  
× 11  
inches)  
VIDEO IN, phono jack (1 each)  
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync  
negative  
8
8
AUDIO IN, phono jacks (2 each)  
Input level: 327 mVrms  
Input impedance: more than 47 kilohms  
LINE OUT  
Supplied accessories  
Remote commander (1)  
Size AA (R6) batteries (2)  
75-ohm coaxial cable with F-type connectors (1)  
VIDEO OUT, phono jack (1)  
Output signal: 1 Vp-p, 75 ohms, unbalanced, sync  
negative  
Design and specifications are subject to change without  
notice.  
AUDIO OUT, phono jacks (2)  
Standard output: 327 mVrms  
Load impedance: 47 kilohms  
Output impedance: less than 10 kilohms  
DIGITAL OUT  
COAXIAL, phono jack  
Output signal: 0.5 Vp-p, 75 ohms  
108US  
Specifications  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index to parts and controls  
Refer to the pages indicated in parentheses ( ) for details.  
Front panel  
A ?/1 POWER (on/standby) switch (37)  
I X (pause) button (35) (42)  
J H (play) button (35) (41)  
B Disc tray (34)  
K SELECT DVD/VIDEO buttons (12)  
C A (open/close) button (34) (36)  
D Tape compartment (41)  
E A (eject) button (42)  
L
Remote sensor (12)  
M PROGRESSIVE indicator (58)  
N CHANNEL/TRACKING +/– buttons*  
F z REC (record) button (46)  
G m (rewind)/M (fast-forward) button  
O LINE-2 IN VIDEO/AUDIO L (MONO)/  
R jacks (96)  
CHANNEL/TRACKING + buttons have a  
tactile dot. Use the tactile dot as a reference.  
H x (stop) button (35) (42)  
continued  
109US  
Index to parts and controls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Display window  
A DVD indicator (35)  
B Angle indicator (67)  
C Record indicator (46)  
D VIDEO indicator (41)  
E Tape indicator (41)  
F Timer indicator (49)  
G STEREO indicator (91)  
H Playing time/clock/current status  
indicator (35) (41)  
I SURR (surround) indicator (76)  
J DTS indicator (55)  
K Disc indicator (35)  
Rear panel  
DVD player and VCR  
DVD player only  
A AC power cord (14) (18)  
F LINE OUT AUDIO L/R jacks (30)  
B LINE IN 1 VIDEO/AUDIO L/R jacks  
G COMPONENT VIDEO OUT Pr/Pb/Y  
C LINE OUT VIDEO/AUDIO L/R jacks  
H S-VIDEO OUT jack (31)  
I DIGITAL AUDIO OUT/COAXIAL jack  
D IN (FROM ANT.) connector (16)  
E OUT (TO TV) connector (16)  
110US  
Index to parts and controls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
G SET UP button (20)  
H SUBTITLE button (68)  
I AUDIO button* (74)  
Remote commander for DVD  
J
K
SKIP button (35)  
REPLAY button (35)  
L X PAUSE button (35)  
M H PLAY button* (35)  
N V/v/B/b buttons (20)  
ENTER button (20)  
O DISPLAY button (39)  
P TOP MENU button (65)  
Q ?/1 (on/standby) switch (13) (37)  
R VOL (volume) +/– buttons (13)  
S ZOOM button (66)  
T ENTER button (20)  
U REPEAT button (70)  
V SURROUND button (76)  
W
m/M y buttons (35)  
X .PREV (previous)/> NEXT  
button (35)  
Y x STOP button (35)  
Z O RETURN button (23)  
wj MENU button (65)  
Number 5, AUDIO and H PLAY buttons have  
a tactile dot. Use the tactile dot as a reference.  
A Z (open/close) button (34) (36)  
B TV / DVD·VIDEO switch (12)  
C SELECT DVD button (12)  
D Number buttons* (29)  
E CLEAR button (71)  
F ANGLE button (67)  
continued  
111US  
Index to parts and controls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F SET UP button (20)  
G TIMER button (48)  
H AUDIO button* (91)  
*Remote commander for VIDEO  
I
J
SKIP button (42)  
REPLAY button (42)  
K SP (Standard Play)/EP (Extended Play)  
button (46)  
L z REC (record) button (46)  
M X PAUSE button (42)  
N H PLAY button* (41)  
O V/v/B/b buttons (20)  
ENTER button (20)  
P DISPLAY button (43)  
Q ?/1 (on/standby) switch (13) (42)  
R CH (channel)/TRACKING +/– buttons*  
S VOL (volume) +/– buttons (13)  
T ENTER button (20)  
U MUTING button (13)  
V SEARCH button (92)  
W TV/VIDEO button (47)  
X INPUT SELECT button (45)  
Y m(rewind)/M (fast-forward)/y (slow)  
buttons (42)  
Z ./> SHUTTLE button (42)  
wj x STOP button (42)  
A Z (eject) button (42)  
B TV / DVD·VIDEO switch (12)  
C SELECT VIDEO button (12)  
D Number buttons* (29)  
wk O RETURN button (23)  
Number 5, AUDIO, H PLAY and  
CH/TRACKING + buttons have a tactile dot.  
Use the tactile dot as a reference.  
E CLEAR button (43) (49)  
112US  
Index to parts and controls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Audio/Subtitle Language  
Abbreviation  
ARA  
BUL  
CHI  
Language  
Arabic  
Bulgarian  
Chinese  
Croatian  
Czech  
CRO  
CZE  
DAN  
DEU  
ENG  
ESP  
Danish  
German  
English  
Spanish  
Finish  
FIN  
FRA  
GRE  
HUN  
IDN  
French  
Greek  
Hungarian  
Indonesian  
Hindi  
IND  
ISL  
Icelandic  
Italian  
ITA  
IWR  
JPN  
Hebrew  
Japanese  
Korean  
KOR  
MAL  
NLD  
NOR  
POL  
POR  
RUS  
SVE  
THA  
TUR  
VIE  
Malay  
Dutch  
Norwegian  
Polish  
Portuguese  
Russian  
Swedish  
Thai  
Turkish  
Vietnamese  
Afrikaans  
ZAF  
113US  
DVD Audio/Subtitle Language  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Index  
Numerics  
16:9 57  
L
S
Language selecting 20  
Safety tab 47  
4:3 Letter Box 57  
4:3 Pan Scan 57  
LP mode 47  
SAP (Second Audio Program)  
Searching  
at various speeds 36, 42  
for a blank portion 93  
for the counter 0 point 93  
Scan and Play 93  
Shuffle play 72  
Shuttle play 42  
SP mode 46  
M
A
Monaural 91  
Monitoring audio during  
playback 91  
Adjusting  
picture 44  
tracking 44  
Angle 67  
Audio track 91  
Audio/video (A/V) hookup 15  
Auto Clock Set 22  
MP3 7, 78  
N
Normal audio track 91  
STEREO 74  
Stereo 91  
Subtitle 68  
Surround 76  
P
C
Parental Control 62  
PBC (Playback control) 88  
Picture adjustment 44  
Playback  
Cable hookup 14  
Cleaning the video heads 3  
Clock setting 22  
Connecting  
T
at various speeds 36, 42  
frame by frame 42  
MP3 audio track 78  
program play 70  
Timer setting  
Cable TV 19  
external antenna connector  
daily/weekly recording 49  
Adjusting  
repeat play 73  
selecting the sound 91  
shuffle play 72  
VHF/UHF band mixer 100  
Counter 43  
Custom AV Mode 40  
U
Usable discs 7  
shuttle play 42  
slow motion 36, 42  
VIDEO CDs 88  
V
D
VIDEO CD 7, 88  
DATA CD 7, 78, 84  
DATA DVD 7, 78, 84  
Disabling channels 28  
DOLBY DIGITAL 74  
DTS 74  
Playback quickly or slowly with  
sound 37  
Presetting channels 26  
Program play 70  
Z
Zoom 66  
Dubbing. see Editing  
DVD 7  
Progressive 107  
R
E
Recording  
Editing 96  
EP mode 46  
bilingual programs 91  
SAP broadcasts 91  
saving 47  
H
stereo broadcasts 91  
while watching another  
program 47, 50  
Repeat play 73  
Resume Play 37  
RF channel 99  
Handling discs 2  
Hi-fi audio track 91  
I
Instant Advance 36  
Instant Replay 36, 42  
Instant Skip 42  
J
JPEG 7, 84  
114US  
Index  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Download from Www.Somanuals.com. All Manuals Search And Download.  
Índice  
Este manual muestra la configuración básica para utilizar la Videograbadora-DVD.  
Para ver detalles, consulte el manual de instrucciones en inglés.  
3 Conexiones básicas  
9 Selección del idioma  
10 Ajuste del reloj  
11 Memorización de canales  
12 Reproducción de discos  
14 Reproducción de cintas  
16 Grabación de programas de TV  
2ES  
Índice  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Procedimientos iniciales  
Conexiones básicas  
Antes de comenzar  
• Asegúrese de desconectar el cable de alimentación de CA de cada componente  
antes de conectarlo.  
• Desactive la alimentación de todo el equipo.  
• No conecte los cables de alimentación de CA hasta no realizar todas las  
conexiones. Si conecta el cable de alimentación de CA antes de haber completado  
las conexiones, es posible que no pueda utilizar la función Plug and Play.  
• Asegúrese de hacer las conexiones firmemente. Las conexiones flojas pueden  
provocar distorsiones en la imagen.  
• Si su televisor no coincide con ninguno de los ejemplos suministrados, consulte  
con el proveedor Sony o técnico calificado más cercano.  
Selección de la mejor opción de conexión  
Si su televisor tiene entradas de audio/video, consulte la página 4 para la conexión de audio/  
video (A/V). Siga después uno de los siguientes procedimientos de conexión. Si su televisor no  
tiene entradas de A/V, vaya directamente a una de las siguientes conexiones.  
Si tiene  
Utilice  
Consulte  
ES  
Antena sólo, sin TV por cable  
Conexión 1 A o B  
Página 5 e 7  
(Plug and Play)  
Decodificador con muy pocos canales  
codificados o sin decodificador  
Conexión 1 C  
(Plug and Play)  
Página 6 e 7  
Página 8  
Decodificador con muchos canales codificados  
Conexión 2  
Después de realizar las conexiones, siga las instrucciones para el ajuste.  
Después de realizar el ajuste podrá utilizar la Videograbadora-DVD. Los procedimientos varían  
en función de la conexión utilizada.  
Precaución  
Las conexiones entre el conector VHF/UHF del Videograbadora-DVD y los terminales de  
antena del receptor de TV deberán ser hechas solamente como se muestra en las siguientes  
instrucciones. Si no lo hace así podrá resultar en una operación que violará los reglamentos de la  
Comisión de Comunicaciones Federal (FCC) relacionada con el uso y la operación de  
dispositivos de radiofrecuencia. No conecte nunca la salida de la Videograbadora-DVD a una  
antena ni haga conexiones simultáneas (en paralelo) de antena y Videograbadora-DVD en los  
terminales de antena de su receptor.  
Nota para el instalador del sistema CATV (en EE.UU.)  
Este recordatorio está provisto para llamar la atención del instalador del sistema CATV sobre el  
artículo 820-40 del NEC que ofrece directrices para la apropiada puesta a tierra y, en particular,  
especifica que el cable de tierra deberá ser conectado al sistema de puesta a tierra del edificio, lo  
más cerca posible del punto de entrada del cable como sea práctico.  
continúa  
3ES  
Conexiones básicas  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Conexión de audio/video (A/V)  
Si su televisor tiene tomas de entrada de audio/vídeo (A/V), obtendrá mejor imagen y sonido si  
conecta su Videograbadora-DVD utilizando estas conexiones. Si su televisor no tiene entrada  
A/V, consulte las páginas siguientes para la conexión de antena o cable.  
Si no piensa utilizar su Videograbadora-DVD para grabar programas, solamente necesitará  
hacer las conexiones mostradas en esta página. Si desea grabar programas normales o de TV  
por cable, realice primero estas conexiones y, después, siga con las páginas siguientes para  
realizar las conexiones de antena o cable.  
A Utilice esta conexión si su televisor tiene tomas estéreo  
Videograbadora-DVD  
Receptor estéreo  
Televisor  
Cable de  
audio/video  
(no suministrado)  
Cable de audio  
(no suministrado)  
B Utilice esta conexión si su televisor no tiene tomas estéreo  
Videograbadora-DVD  
Receptor estéreo  
Televisor  
Cable de video  
(no suministrado)  
Cable de audio  
(no suministrado)  
Notas  
Para reproducir una cinta/disco en estéreo, debe utilizar la conexión de A/V.  
Si no dispone de receptor estéreo, conecte la toma LINE OUT/AUDIO L blanca a la toma  
AUDIO IN del televisor.  
4ES  
Conexiones básicas  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Conexión 1 (Plug and Play)  
A Utilice esta conexión si está utilizando:  
• Antena VHF/UHF (obtendrá los canales 2–13 y canales 14 y superior)  
• Antena UHF sólo (obtendrá los canales 14 y superiores)  
• Antenas VHF y UHF independientes  
Parte posterior del  
televisor VHF/UHF  
Case con el tipo de  
conector de su  
A
o
o
televisor: A, B, o C.  
VHF  
Videograbadora-DVD  
B
UHF  
VHF  
C
UHF  
B Utilice esta conexión si emplea una antena sólo para VHF (obtendrá  
sólo los canales 2–13)  
Parte posterior  
del TV VHF/UHF  
A
Case con el tipo de  
conector de su  
o
o
televisor: A, B, o C.  
Videograbadora-DVD  
VHF  
Para los  
B
conectores tipo B  
y C, no se requiere  
conexión UHF.  
UHF  
VHF  
C
UHF  
Si no puede conectar directamente el cable de la antena a la  
Videograbadora-DVD  
Si su cable de antena es un cable plano (cable bifilar de 300 ohm), enchufe un  
conector de antena externa (no suministrado) para poder conectar el cable al conector  
IN. Si tiene cables independientes para antenas VHF y UHF, debe utilizar un  
mezclador de bandas de U/V (no suministrado).  
continúa  
5ES  
Conexiones básicas  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
C Utilice esta conexión si no tiene decodificador de cable, o si tiene un  
decodificador de cable con sólo unos pocos canales codificados  
Uso recomendado  
Utilice esta conexión si no tiene un decodificador. Utilice también esta conexión si su  
sistema de cable sólo codifica algunos canales.  
Con esta conexión podrá  
• Grabar cualquier canal no codificado seleccionando el canal en la Videogradadora  
Con esta conexión no podrá  
• Grabar canales codificados que requieran un decodificador  
Videograbadora-DVD  
Parte posterior  
Pared  
del TV VHF/UHF  
A
Case con el  
tipo de  
conector de su  
televisor:A, B,  
o C.  
o
o
VHF  
B
Para los  
conectores  
tipo B y C, no  
se requiere  
conexión UHF.  
UHF  
VHF  
Conecte este cable  
directamente a su  
televisor si no tiene  
decodificador.  
Decodificador  
C
UHF  
6ES  
Conexiones básicas  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Videograbadora-DVD configuración (Conexión 1 continuación)  
Enchufe la Videograbadora-DVD en la toma de CA.  
Cuando enchufe la Videograbadora-DVD en la toma de CA, la Videograbadora-DVD  
preajustará automáticamente el reloj y memorizará los canales de TV de la  
Videograbadora-DVD.  
a la toma de CA  
Cable de alimentación de CA  
La Videograbadora-DVD empezará a  
preajustar el reloj y memorizar los  
canales.  
Cuando el preajuste automático esté  
completo, aparecerá la hora actual en el  
visualizador.  
Ha finalizado el ajuste de la Videograbadora-DVD.  
Para empezar a utilizar su Videograbadora-DVD, vaya a “Operaciones  
Para cambiar el idioma de las indicaciones en pantalla a español, consulte “Selección  
El reloj se ajusta utilizando una señal horaria ofrecida por algunos canales de TV. Si  
el reloj es incorrecto, o si aparece “--:--” en el visualizador, consulte “Ajuste del  
Notas  
Si conecta el cable de alimentación de CA antes de haber completado las conexiones de la  
antena, los canales podrán ajustarse incorrectamente. Si se diera el caso, consulte  
No presione ningún botón en la videograbadora-DVD ni en el mando a distancia durante el  
preajuste automático.  
El preajuste automático sólo comienza automáticamente cuando usted enchufa el cable de  
alimentación de CA por primera vez después de comprar la Videograbadora-DVD.  
El preajuste automático puede realizarse presionando x en la unidad continuamente durante  
5 segundos o más con la alimentación del Videograbadora-DVD desconectada.  
continúa  
7ES  
Conexiones básicas  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Conexión 2  
Utilice esta conexión si va a conectar un decodificador de cable con  
muchos canales codificados  
Con esta conexión podrá  
• Grabar cualquier canal seleccionando el canal en el decodificador  
Con esta conexión no podrá  
• Grabar con el decodificador apagado  
• Grabar un canal mientras ve otro canal  
Decodificador  
Parte posterior del  
televisor VHF/UHF  
Pared  
A
Case con el tipo de  
conector de su  
televisor: A, B, o C.  
o
o
VHF  
B
Para los  
conectores tipo B  
y C, no se  
requiereconexión  
UHF.  
UHF  
VHF  
Videograbadora-DVD  
C
UHF  
Después de haber completado la conexión…  
Después de haber completado la conexión, enchufe la videograbadora-DVD en la  
a la toma de CA  
Cable de alimentación de CA  
8ES  
Conexiones básicas  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Selección del idioma  
Es posible cambiar el idioma de las indicaciones en pantalla.  
Antes de comenzar…  
• Encienda la Videograbadora-DVD y su televisor.  
• Ajuste el televisor a entrada de vídeo para que aparezca en la pantalla de televisor  
la señal procedente del reproductor.  
• Si el reproductor de DVD está en el modo de reproducción, no podrá visualizar el  
menú de ajustes. Pare la reproducción de DVD.  
• Utilice el mando a distancia para realizar las siguientes funciones.  
Pulse SET UP, después pulse V/v para seleccionar  
(OPTION) y pulse ENTER.  
1
Pulse V/v para seleccionar “Language”, después pulse  
2
ENTER.  
B
Aparecerá el menú “LANGUAGE/IDIOMA/LANGUE”.  
Pulse V/v para seleccionar el idioma deseado, inglés, español o francés, después pulse  
ENTER.  
3
Pulse SET UP para salir del menú.  
4
9ES  
Selección del idioma  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Ajuste del reloj  
Antes de comenzar…  
• Encienda la Videograbadora-DVD y su televisor.  
• Ajuste el televisor a entrada de vídeo para que aparezca en la pantalla de televisor  
la señal procedente del reproductor.  
• Si el reproductor de DVD está en el modo de reproducción, no podrá visualizar el  
menú de ajustes. Pare la reproducción de DVD.  
• Utilice el mando a distancia para realizar las siguientes funciones.  
Pulse SET UP, después pulse V/v para seleccionar  
1
2
3
4
(OPTION) y pulse ENTER.  
Pulse V/v para seleccionar “Ajuste de la hora”, después pulse  
ENTER.  
Aparecerá el menú “AJUSTE DE LA HORA”.  
Pulse V/v para seleccionar “Manual”, y pulse ENTER.  
Ajuste la hora, los minutos, el mes, el día y el año consecutivamente pulsando B/b para  
seleccionar el elemento a ajustar, y pulse V/v para seleccionar los dígitos.  
El día de la semana se ajusta automáticamente.  
Pulse ENTER para confirmar el ajuste.  
5
6
Pulse SET UP para salir del menú.  
Notas  
Para grabar programas de TV utilizando el temporizador, deberá ajustar el reloj con  
exactitud.  
La visualización del reloj aparecerá cuando se seleccione el modo VIDEO sin cinta insertada  
o cuando sea apagada la Videograbadora-DVD.  
10ES  
Ajuste del reloj  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Memorización de canales  
Esta Videograbadora-DVD puede recibir los canales VHF 2 al 13, los canales UHF 14 al 69 y  
los canales CATV no codificados 1 al 125. Se recomienda que primero memorice los canales  
sintonizables en su área utilizando los métodos de memorización automática.  
Antes de comenzar…  
• Encienda la Videograbadora-DVD y su televisor. Si utiliza un decodificador,  
enciéndalo.  
• Ajuste el televisor a entrada de vídeo para que aparezca en la pantalla de televisor  
la señal procedente del reproductor.  
• Si el reproductor de DVD está en el modo de reproducción, no podrá visualizar el  
menú de ajustes. Pare la reproducción de DVD.  
• Utilice el mando a distancia para realizar las siguientes funciones.  
Pulse SET UP, después pulse V/v para seleccionar  
(OPTION) y pulse ENTER.  
1
Pulse V/v para seleccionar “Ajuste de canales”, después  
2
pulse ENTER.  
Aparecerá el menú “AJUSTE DE CANALES”.  
Pulse V/v para seleccionar “Antena/Cable”.  
3
4
• Para memorizar los canales de TV por cable:  
Pulse B/b para seleccionar “Cable”.  
• Para memorizar los canales VHF y UHF:  
Pulse B/b para seleccionar “Antena”.  
Pulse V/v para seleccionar “Auto-programación”, después  
5
pulse ENTER.  
Se memorizarán todos los canales sintonizables en secuencia  
numérica. Cuando ya no puedan encontrarse más canales, la  
memorización se detendrá y aparecerá la imagen del canal de  
número más bajo en la pantalla del televisor.  
11ES  
Memorización de canales  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operaciones básicas  
Reproducción de discos  
Dependiendo del disco, algunas operaciones podrán variar o estar restringidas. Consulte el  
manual de instrucciones suministrado con su disco.  
Antes de comenzar...  
• Encienda la Videograbadora-DVD y su televisor.  
• Ajuste el televisor a entrada de vídeo para que aparezca en la pantalla de televisor  
la señal procedente del reproductor.  
• Utilice el mando a distancia para realizar las siguientes funciones.  
Pulse SELECT DVD para controlar el reproductor de DVD.  
1
Pulse Z para abrir la bandeja de discos y poner un  
disco en ella.  
2
con la cara de  
reproducción hacia abajo  
Pulse H PLAY.  
3
La bandeja de discos se cerrará y el  
reproductor de DVD comenzará a reproducir.  
El visualizador mostrará el tiempo de  
reproducción*.  
Hora Minuto Segundo  
* Cuando no haya disco cargado aparecerá “– – – ––”.  
Notas  
Detenga la reproducción VIDEO mientras reproduzca un disco.  
Si reproduce un DVD o VIDEO CD que esté rayado, el reproductor podrá parar la  
reproducción en el punto donde esté rayado.  
La reproducción de listas de reproducción de duración superior a 10 horas grabadas en el  
modo VR no está garantizada.  
Operaciones adicionales  
Para  
Pulse  
Detener la reproducción  
x STOP  
12ES  
Reproducción de discos  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Para  
Pulse  
Hacer pausas durante la reproducción  
X PAUSE  
Si hace una pausa en el reproductor de DVD de más de 5  
min (minuto), el reproductor de DVD se parará  
automáticamente.  
Reanudar la reproducción después de la  
pausa  
H PLAY  
Avanzar al siguiente fotograma en el modo  
de pausa  
SKIP  
Volver al fotograma anterior en el modo de  
pausa  
REPLAY  
Ir al siguiente capítulo, tema, o escena en el > NEXT en el mando a distancia o M en la unidad  
modo de reproducción continua  
Volver al capítulo, tema o escena anterior en . PREV en el mando a distancia o m en la unidad  
el modo de reproducción continua  
Localizar un punto rápidamente  
m o M en el mando a distancia (o mantenga pulsado  
m o M en la unidad)  
La velocidad de reproducción cambia de la forma  
siguiente cada vez que se pulsa el botón en el mando a  
distancia (o dependiendo del tiempo que mantenga  
pulsado el botón en la unidad):  
Cuando encuentre el punto que quiera, pulse H PLAY.  
Ver a cámara lenta en el modo de  
reproducción continua  
(DVD y VIDEO CD solamente)  
X PAUSE durante la reproducción, y pulse  
La velocidad de reproducción cambia de la forma  
siguiente cada vez que se pulsa o y:  
o y  
Para reanudar la reproducción normal, pulse H PLAY.  
Reproducción de la escena anterior en 10 s  
(segundo) el modo de reproducción  
REPLAY  
continua*1 (Reproducción instantánea)  
Avanzar ligeramente la escena actual 30 s  
(segundo) en el modo de reproducción  
continua*1 (Avance instantáneo)  
SKIP  
Puede pulsar  
avanzar rápidamente hasta 2 minutos en total.  
SKIP hasta 4 veces. Esto le permitirá  
Parar la reproducción y extraer el disco  
Z
*1 Para DVD VIDEO y DVD-RW/DVD-R o DVD+RW/DVD+R solamente  
Notas  
No saldrá sonido excepto:  
– durante la reproducción normal  
– durante la reproducción rápida o lenta con sonido  
Dependiendo del método empleado para la grabación es posible que no pueda realizarse la  
operación de retroceso rápido para CD, MP3 y VIDEO CD.  
Tal vez no pueda utilizar la función de reproducción instantánea o avance instantáneo con  
algunas escenas.  
13ES  
Reproducción de discos  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reproducción de cintas  
Antes de comenzar...  
• Encienda la Videograbadora-DVD y su televisor.  
• Ajuste el televisor a entrada de vídeo para que aparezca en la pantalla de televisor  
la señal procedente del reproductor.  
• Utilice el mando a distancia para realizar las siguientes funciones.  
Pulse SELECT VIDEO para controlar el reproductor de Videograbadora.  
1
Inserte una cinta.  
2
La videograbadora comenzará a reproducir  
automáticamente si inserta una cinta con su lengüeta de  
seguridad quitada.  
Pulse H PLAY.  
3
El visualizador mostrará el tiempo de  
reproducción.  
Cuando la cinta llegue al final, se rebobinará  
automáticamente.  
Hora Minuto Segundo  
Operaciones adicionales  
Para  
Pulse  
Detener la reproducción  
Hacer pausas durante la reproducción  
x STOP  
X PAUSE  
Si hace una pausa en la videograbadora de más de 5 min  
(minuto), la videograbadora reanudará automáticamente  
la reproducción.  
Reanudar la reproducción después de la  
pausa  
X PAUSE o bien H PLAY  
Avanzar la cinta rápidamente  
Rebobinar la cinta  
M durante la parada  
m durante la parada  
Z
Expulsar la cinta  
Visualización de la imagen durante el  
avance rápido o el rebobinado  
Durante el avance rápido, mantenga pulsado M.  
Durante el rebobinado, mantenga pulsado m.  
14ES  
Reproducción de cintas  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Para  
Pulse  
Reproducción a alta velocidad  
Durante la reproducción, pulse brevemente M o m.  
La cinta continuará reproduciéndose a una velocidad 5  
veces mayor que la reproducción normal.  
Durante la reproducción, mantenga pulsado  
M o m. La cinta continuará reproduciéndose a una  
velocidad 5 veces mayor que la reproducción normal.  
Al dejar de pulsar el botón, se reanuda la reproducción  
normal.  
Reproducción a cámara lenta  
Durante la pausa, pulse y.  
Reproducción fotograma a fotograma  
Durante la pausa, pulse  
SKIP.  
Reproducción de la escena anterior en el  
modo de reproducción continua*  
(Reproducción instantánea)  
Durante la reproducción, pulse  
REPLAY.  
SKIP.  
Salto de la escena actual 30 s (segundo) en  
el modo de reproducción continua*(Salto  
instantáneo)  
Durante la reproducción, pulse  
Puede pulsar  
SKIP hasta 4 veces. Esto le permitirá  
avanzar rápidamente hasta 2 minutos en total.  
Reproducción a varias velocidades  
(Reproducción Shuttle)  
Durante la reproducción, pulse .o >. Podrá  
cambiar la velocidad de reproducción de la siguiente  
forma.  
×7 y ×5 y ×3 y Reproducción de la imagen fija  
y Reproducción a cámara lenta y Reproducción  
normaly ×2 y ×3 y ×5 y ×7  
* 10 s (segundo) en el modo SP o en el modo LP/15 s (segundo) en el modo EP  
Para reanudar la reproducción normal  
Pulse H PLAY.  
Para desconectar la alimentación durante el rebobinado (Parada del  
rebobinado)  
Pulse ?/1 mientras la cinta se está rebobinando. La alimentación se desactivará pero  
la cinta seguirá rebobinándose hasta que llegue al final.  
Notas  
A varias velocidades de reproducción no sale sonido.  
La imagen puede aparecer con ruido al reproducirse a alta velocidad en sentido inverso.  
Pare la reproducción de disco mientras esté reproduciendo un vídeo.  
15ES  
Reproducción de cintas  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Grabación de programas de TV  
Antes de comenzar...  
• Encienda la Videograbadora-DVD y su televisor.  
• Cambie el selector de entrada de su televisor de forma que aparezca la señal  
procedente del reproductor en la pantalla del televisor.  
• Para grabar desde un decodificador, enciéndalo.  
• Compruebe que la longitud de la cinta sea superior al tiempo total de grabación.  
• Utilice el mando a distancia para realizar las siguientes funciones.  
Pulse SELECT VIDEO para controlar la videograbadora.  
1
2
3
Inserte una cinta provista de lengüeta de seguridad.  
Presione CH +/– para seleccionar el canal o la fuente de video de entrada de línea que  
desee grabar.  
Pulse SP/EP para seleccionar la velocidad de cinta, SP (reproducción estándar) o EP  
(reproducción extendida).  
4
El modo EP proporciona un tiempo de  
grabación tres veces superior al modo SP. No  
obstante, se obtiene una mejor calidad de  
imagen y sonido con el modo SP.  
Pulse z REC para iniciar la grabación.  
5
Aparecerá “RECen el visualizador.  
Para detener la grabación  
Pulse x STOP.  
Notas  
No es posible grabar un DVD directamente a una cinta Videograbadora utilizando su  
Videograbadora-DVD.  
16ES  
Grabación de programas de TV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sony Corporation Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AK68-00923A  

Sherwood Stereo Receiver RX 773 User Manual
SMSC Network Card USB2601 User Manual
Solo USA Radar Detector R D 5 1 1 0 User Manual
Sony Digital Camera DKC FP3 User Manual
Sony Flat Panel Television 4 174 990 131 User Manual
Sony Microphone ECM DS70P User Manual
Sony Portable Radio XDR S50 User Manual
Stanton Turntable DJ For Life User Manual
Superior Cell Phone W200 User Manual
Swisher Log Splitter LS67528S User Manual