3-209-583-11(1)
DVD Home
Theatre System
Operating Instructions
HTP-78DW
©2007 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Manual
• The instructions in this manual are for model
HTP-78DW. Check your receiver’s model number
by looking at the lower right corner of the front
panel.
• The instructions in this manual describe the
controls on the supplied remote. You can also use
the controls on the receiver if they have the same
or similar names as those on the remote. For
details on the use of your DVD player, refer to the
operating instructions supplied with the DVD
player.
The HTP-78DW consists of:
• Receiver
STR-K785
• DVD player
DVP-NS78H
• Speaker system
– Front speakers
– Center speaker
– Surround speakers
– Sub woofer
SS-MSP680
SS-CNP680
SS-SRP680
SA-WP780
This receiver incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
*
Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol
are trademarks of Dolby Laboratories.
** “DTS” and “DTS Digital Surround” are
registered trademarks of DTS, Inc.
3GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
6: Calibrating the appropriate settings
Enjoying Dolby Digital and DTS Surround
Using only the front speakers and sub
Resetting sound fields to the initial
(AUTO CALIBRATION).......................25
7: Adjusting the speaker levels and
Switching between digital and analog
Settings for the surround sound
Calibrating the appropriate settings
4GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Description and location of parts
Receiver
Front panel
1
2 3
4
5
6
2CH
A.F.D.
MOVIE
MUSIC
DISPLAY
DIMMER
?/1
AMP MENU
ENTER
MASTER
VOLUME
AUTO CAL MIC
MEMORY
FM MODE
PRESET TUNING
TUNING
+
+
VIDEO
1
VIDEO
2
DVD
SA-CD/CD
FM
AM
INPUT MODE
PHONES
qkqj qh qg
qf
qd
qs
qa
q; 98
7
Name
Function
Name
Function
A ?/1
Press to turn the receiver
45).
G
MASTER
VOLUME
Turn to adjust the volume
level of all speakers at the
(on/standby)
B
DISPLAY
DIMMER
Press to select information
displayed on the display
H
I
ENTER
Press to enter a selection
C
D
E
Press to adjust the
brightness of the display.
INPUT MODE
Press to select the input
mode when the same
components are connected
to both digital and analog
Remote sensor Receives signals from
remote commander.
Display
The current status of the
selected component or a
list of selectable items
J I/i/U/u
After pressing AMP
MENU (K), press I/i/
U/u to select the settings.
K
AMP MENU
Press to display the menu
of the receiver.
F
2CH
Press to select a sound field
A.F.D.
MOVIE
MUSIC
continued
5GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Function
L
Input buttons
Press one of the buttons to
select the component you
want to use.
M
PRESET
TUNING +/–
Press to select a preset
station.
N
O
P
TUNING +/–
MEMORY
FM MODE
Press to scan a station.
Press to store a station.
Press to select FM
monaural or stereo
reception.
Q
R
PHONES jack
Connects to headphones
AUTO CAL MIC Connects to the supplied
jack
optimizer microphone for
the Auto Calibration
function (page 26).
6GB
Download from Www.Somanuals.com. All Manuals Search And Download.
About the indicators on the display
1
2
3
4
5
6
7
SP
;
DIGITAL
;
PRO LOGIC II DTS
RDS
STEREO MONO
LFE
MEMORY
SW
SLEEP OPT COAX
D.RANGE
L
C
R
SL
S
SR
qd qs qa
q;
9
qf
8
Name
Function
Name
Function
A SW
Lights up when audio signal is
output from the SUB WOOFER
jack.
F DTS
Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
“ANALOG” (page 51).
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
G MEMORY
Lights up when a memory
function, such as Name Input,
is activated.
C SP
Lights up when the receiver is
turned on. This indicator does
not light up if a headphone is
connected to the PHONES jack.
H Preset
station
Lights up when using the
receiver to tune in preset radio
stations. For details on
presetting radio stations, see
D ;DIGITAL Lights up when the receiver is
decoding Dolby Digital signals.
Note
indicators
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to “ANALOG” (page 51).
I Tuner
Lights up when using the
receiver to tune in radio stations
(page 46), etc.
indicators
J D.RANGE
Lights up when dynamic range
compression is activated (page
34).
E ; PRO
“; PRO LOGIC” lights up
when the receiver applies Pro
Logic processing to 2 channel
signals in order to output the
center and surround channel
signals. “; PRO LOGIC II”
lights up when the Pro Logic II
Movie/Music decoder is
activated.
LOGIC (II)
K COAX
Lights up when INPUT MODE
is set to “AUTO IN” and the
source signal is a digital signal
being input through the
COAXIAL jack, or when
INPUT MODE is set to “COAX
Note
Dolby Pro Logic and Dolby Pro
Logic II decoding do not
function for DTS format
signals.
L OPT
Lights up when INPUT MODE
is set to “AUTO IN” and the
source signal is a digital signal
being input through the
OPTICAL jack, or when
INPUT MODE is set to “OPT
continued
7GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Function
M SLEEP
Lights up when the Sleep Timer
function is activated (page 53).
N Playback
channel
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound.
indicators
L
R
Front Left
Front Right
C
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
SL
SR
S
Recording format (Front/
Surround): Dolby Digital 3/2.1
Sound Field: A.F.D. AUTO
SW
LFE
L
C
R
SL
SR
8GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
1
2
3
4
DIGITAL
OPTICAL
ANTENNA
Y
VIDEO
IN
1
P
B/CB
R/CR
MONITOR
AM
VIDEO
IN
2
P
VIDEO IN
VIDEO IN
VIDEO IN
VIDEO OUT
DVD
IN
VIDEO
IN
2
MONITOR
OUT
COMPONENT VIDEO
DVD IN
R
R
L
L
R
R
L
L
COAXIAL
+
+
+
+
L
L
L
AUDIO
OUT
R
R
R
AUDIO IN
AUDIO IN
AUDIO IN
AUDIO IN
VIDEO
SUB
SURROUND
CENTER
FRONT
SA-CD/CD DVD VIDEO
2
1
WOOFER
SPEAKERS
6
5
A DIGITAL INPUT section
D COMPONENT VIDEO INPUT/
OUTPUT section
OPTICAL
IN jacks
Connects to a DVD
player, etc. The
COAXIAL jack
provides a better
quality of loud
21).
COMPONENT Connects to a
VIDEO IN/
OUT jacks*
Green
(Y)
DVD player, TV,
or a satellite tuner.
You can enjoy
high quality image
COAXIAL IN
jack
Blue
(PB/CB)
Red
(PR/CR)
B ANTENNA section
E SPEAKERS section
FM
ANTENNA
jack
Connects to theFM
wire antenna
supplied with this
Connects to
speakers (page
AM
Connects to the
ANTENNA
terminals
AM loop antenna
supplied with this
Connects to sub
F AUDIO INPUT section
C VIDEO/AUDIO INPUT and VIDEO
AUDIO IN
jacks
Connects to a CD
player, etc. (page
16).
OUTPUT section
White (L)
Red (R)
AUDIO IN
jacks
Connects to a
VCR, DVD player,
White (L)
Red (R)
* You can watch the selected input image when you
connect the MONITOR OUT jack to a TV (page
VIDEO IN/
OUT jacks*
Yellow
9GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Function
Remote commander
A AV ?/1
Press to turn on or off the
You can use the supplied remote to operate the
receiver and to control the Sony audio/video
components that the remote is assigned to
operate (page 53).
(on/standby) Sonyaudio/videocomponents
that the remote is assigned to
operate (page 53).
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other
components (SYSTEM
STANDBY).
RM-AAU006
Note
1
TV ?/1
?/1
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (C).
TV/VIDEO AUTO
SLEEP CAL
AV
?/1
2
3
wg
wf
SYSTEM STANDBY
DVD SA-CD/CD
VIDEO 1 VIDEO 2
B TV ?/1
Press TV ?/1 and TV (P) at
(on/standby) the same time to turn the TV
on or off.
TUNER AMP MENU
wd
ws
4
5
2CH
A.F.D.
MOVIE
MUSIC
DUAL MONO
FM MODE
?/1
(on/standby) off.
To turn off all components,
Press to turn the receiver on or
1
4
7
2
5
3
6
9
6
7
8
wa
w;
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
D.TUNING
D.SKIP
8
MEMORY DVD MENU
ENTER
>10/
-
9
q;
qa
qs
0/10
CLEAR
C Input buttons Press one of the buttons to
select the component you
MUTING
TV VOL
DISPLAY
TOOLS
ql
qk
qj
want to use. When you press
any of the input buttons, the
receiver turns on. The buttons
are factory assigned to control
Sony components as follows.
You can change the button
assignments following the
F
f
MASTER VOL
G
g
qd
qf
RETURN/EXIT
TV CH –
MENU
TV CH +
PRESET – REPLAY ADVANCE PRESET +
.
<
<
>
steps in “Changing button
TUNING –
TUNING +
m
H
X
M
qg
TV
Button
Assigned Sony
component
x
qh
VIDEO 1 VCR (VTR mode 3)
VIDEO 2 VCR (VTR mode 2)
DVD
DVD player
SA-CD/CD Super Audio CD/CD
player
TUNER
Built-in tuner
D AMP MENU
Press to display the menu of
the receiver. Then, use V/v/
B/b and
(R) to perform
menu operations.
E MOVIE,
Press to select sound field for
movie or music.
MUSIC
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Function
Name
Function
F DUAL MONO Press to select the language
you want during digital
O ./>
Press to skips a track of the
CD player, DVD player, or
tape deck.
broadcast.
<
G FM MODE
H D.TUNING
D.SKIP
Press to select FM monaural
or stereo reception.
REPLAY
/
Press to replay the previous
<
ADVANCE
scene or fast forward the
current scene of the VCR or
DVD player.
Press to enter direct tuning
mode.
m/M
Press to
Press to skip a disc of the CD
player or DVD player (multi-
disc changer only).
– search tracks in the forward/
backward direction of the
DVD player.
– fast forward/rewind of the
VCR, CD player, or tape
deck.
I ENTER
Press to enter the value after
selecting a channel, disc or
track using the numeric
buttons.
H*
Press to start playback of the
VCR, CD player, DVD
player, or tape deck.
MEMORY
Press to store a station.
J DVD MENU
Press to display the menu of
the DVD player on the TV
screen. Then, use V/v/B/b
X
Press to pause playback or
recording of the VCR, CD
player, DVD player, or tape
deck. (Also starts recording
with components in recording
standby.)
and
(R) to perform menu
operations.
K TOOLS
Press to display options
applicable to the entire disc
(e.g. disc protection), recorder
(e.g. audio settings during
recording), or multiple items
on a list menu (e.g. erasing
multiple titles).
x
Press to stop playback of the
VCR, CD player, DVD
player, or tape deck.
TV CH +/–
Press TV CH +/– and TV (P)
at the same time to select
preset TV channels.
L MUTING
Press to mute the sound.
PRESET +/– Press to select
M TV VOL
Press TV VOL +/– and TV
(P) at the same time to adjust
the TV volume level.
– preset stations.
– preset channels of the VCR
or satellite tuner.
+*/–
MASTER VOL Press to adjust the volume
+*/–
TUNING +/–
P TV
Press to scan a station.
level of all speakers at the
same time.
To activate the buttons with
orange printing, press TV and
the button with orange
N MENU
Press to display the menus of
the VCR, DVD player, or
satellite tuner on the TV
screen. Then, use V/v/B/b
printing simultaneously.
Q RETURN/
Press to
and
(R) to perform menu
EXIT O
– return to the previous menu.
– exit the menu while the
menu or on-screen guide of
the VCR, DVD player, or
satellite tuner is displayed
on the TV screen.
operations.
continued
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Function
Name
Function
R
After pressing AMP MENU
(D), DVD MENU (J), or
MENU (N), press V, v, B or
b to select the settings. Then,
press
for DVD MENU or MENU.
Press also to enter the
selection of the receiver,
VCR, satellite tuner, CD
player, or DVD player.
Y TV/VIDEO
Press TV/VIDEO and TV
(P) at the same time to select
the input signal (TV input or
video input).
,
V/v/B/b
to enter the selection
SLEEP
Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
* The number 5, MASTER VOL +, TV VOL +, and
H buttons have tactile dots. Use the tactile dots
as references when operating the receiver.
S DISPLAY
Press to select the information
displayed on the TV screen of
the VCR, satellite tuner, CD
player or DVD player.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
T -/--
Press -/-- and TV (P) at the
same time to select the
channel entry mode, either
one or two digits of the TV.
x
>10/
Press to select
– track numbers over 10 of the
VCR, satellite tuner or CD
player.
– channel numbers of the
Digital CATV terminal.
CLEAR
Press to
– clear a mistake when you
press the incorrect numeric
buttons.
– return to continuous
playback, etc. of the satellite
tuner or DVD player.
U Numeric
buttons
Press to
– preset/tune to preset
stations.
(number 5*)
– select track numbers of the
CD player or DVD player.
Press 0/10 to select track
number 10.
– select channel numbers of
the VCR or satellite tuner.
Press the numeric buttons and
TV (P) at the same time to
select the TV channels.
V 2CH
Press to select 2CH STEREO
mode.
W A.F.D.
Press to select A.F.D. mode.
X AUTO CAL
Press to activate the Auto
Calibration function.
12GB
Download from Www.Somanuals.com. All Manuals Search And Download.
1: Installing speakers
The receiver allows you to use a 5.1 channel
system (5 speakers and one sub woofer).
To fully enjoy theater-like multi channel
surround sound requires five speakers
(two front speakers, a center speaker, and two
surround speakers) and a sub woofer
(5.1 channel).
Installing the speakers on a flat
surface
Before you install the speakers and sub
woofer, be sure to attach the supplied foot pads
to prevent vibration or movement as shown in
the illustration below.
Installing the speakers on the
speaker stand
For greater flexibility in positioning the
speakers, use the optional WS-FV11 or
WS-FV10D speaker stand (available only in
certain countries). Be sure to detach the screw
from the speaker and use it when you install
the speaker to the speaker stand. For details,
refer to the operating instructions supplied
with the speaker stand.
AFront speaker (Left)
BFront speaker (Right)
CCenter speaker
DSurround speaker (Left)
ESurround speaker (Right)
FSub woofer
Tip
Since the sub woofer does not emit highly
directional signals, you can place it wherever
you want.
13GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Hang the speakers on the
Installing the speakers on the
wall
screws.
Hook on the back of the speaker
You can install your front and surround
speakers on the wall.
4.6 mm
16 mm
1 Prepare screws (not supplied)
that are suitable for the hook on
the back of each speaker as
shown in the illustrations
below.
more than 4 mm
more than 25 mm
Notes
4.6 mm
16 mm
• Use screws that are suitable for the wall material
and strength. As a plaster board wall is especially
fragile, attach the screws securely to a beam and
fasten them to the wall. Install the speakers on a
vertical and flat wall where reinforcement is
applied.
Hook on the back of the speaker
• Contact a screw shop or installer regarding the wall
material or screws to be used.
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
2 Fasten the screws to the wall.
The screws should protrude 5
to 7 mm.
5 to 7 mm
14GB
Download from Www.Somanuals.com. All Manuals Search And Download.
2: Connecting speakers
F
C
C
A
Y
P
B/CB
R/CR
MONITOR
P
VIDEO IN
VIDEOUT
DVD
IN
VIDEO
IN
2
MONITOR
OUT
COMPONENT VIDEO
R
R
L
L
R
R
L
L
+
+
+
+
L
AUDIO
OUT
R
AUDIO IN
SUB
SURROUND
CENTER
FRONT
VIDEO 1 WOOFER
SPEAKERS
B
B
A
A
E
D
B
A
ASpeaker cord (short) (supplied)
BSpeaker cord (long) (supplied)
CMonaural audio cord (supplied)
AFront speaker (Left)
BFront speaker (Right)
CCenter speaker
DSurround speaker (Left)
ESurround speaker (Right)
FSub woofer
To connect the speakers
correctly
Check the speaker type by referring to the
speaker label* on the speakers.
Character on Speaker type Location of
speaker label
speaker label
L
Front left
Bottom
Tip
R
Front right
Surround left
Bottom
Use the supplied speakers to optimize the system’s
performance.
SL
SR
Bottom
Surround right Bottom
* The center speaker and sub woofer do not have the
character on the speaker label. For details on the
15GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3a: Connecting the audio components
Connecting a Super Audio CD/
CD player
The following illustration shows how to
connect a Super Audio CD player or CD
player.
After connecting your audio component,
proceed to “3b: Connecting the video
Super Audio
CD player/
CD player
A
DIGITAL
OPTICAL
ANTENNA
Y
VIDEO
IN
1
P
B/CB
R/CR
MONITOR
AM
VIDEO
IN
2
P
VIDEO IN
VIDEO IN
VIDEO IN
VIDEO OUT
DVD
IN
VIDEO
IN
2
MONITOR
OUT
COMPONENT VIDEO
DVD IN
R
R
L
L
COAXIAL
+
+
+
L
L
L
AUDIO
OUT
R
R
R
AUDIO IN
AUDIO IN
AUDIO IN
AUDIO IN
SUB
SURROUND
CENTER
SA-CD/CD DVD VIDEO 2
VIDEO 1 WOOFER
SPEAKERS
AAudio cord (not supplied)
16GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3b: Connecting the video components
How to connect your
components
Video input/output jack to be
connected
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
This section describes how to connect your
video components to this receiver. Before you
below for the pages which describe how to
connect each component.
After connecting all your components,
proceed to “4: Connecting the antennas” (page
23).
TV, etc. INPUT jack
COMPONENT
VIDEO
VIDEO
Component to be connected
Receiver
MONITOR OUT
jack
Component
Page
COMPONENT
VIDEO
VIDEO
TV
DVD player/DVD recorder
Satellite tuner/Set-top box
VCR
COMPONENT
VIDEO
VIDEO
VIDEO
Receiver INPUT
jack
Video component
OUTPUT jack
COMPONENT
VIDEO
High quality image
Notes
• Connect image display components such as a TV
or a projector to the MONITOR OUT jack on the
receiver.
• Be sure to turn on the receiver when the video and
audio of a playback component are being output to
a TV via the receiver. If the power supply of the
receiver is not turned on, neither video nor audio is
transmitted.
17GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a TV
The image from a visual component connected
to this receiver can be displayed on a TV
screen.
It is not necessary to connect all the cords.
Connect video cords according to the jacks of
your components.
TV
A
B
DIGITAL
OPTICAL
ANTENNA
Y
VIDEO
IN
1
P
B/CB
R/CR
MONITOR
AM
VIDEO
IN
2
P
VIDEO IN
VIDEO IN
VIDEO IN
VIDEO OUT
DVD
IN
VIDEO
IN
2
MONITOR
OUT
COMPONENT VIDEO
DVD IN
R
R
L
L
COAXIAL
+
+
+
L
L
L
AUDIO
OUT
R
R
R
AUDIO IN
AUDIO IN
AUDIO IN
AUDIO IN
SUB
SURROUND
CENTER
SA-CD/CD DVD VIDEO 2
VIDEO 1 WOOFER
SPEAKERS
AVideo cord (not supplied)
BComponent video cord (not supplied)
• To fully enjoy surround sound while watching TV
programmes, connect the audio output of your
TV’s jacks to the VIDEO 2 AUDIO IN jacks of the
receiver and select VIDEO 2 as an input. Then,
turn down or mute the TV’s volume. For details on
selecting the surround sound, see “Enjoying
Notes
• You can watch the selected input image when you
connect image display components such as a TV or
a projector to the MONITOR OUT jack on the
receiver.
• Be sure to turn on the receiver when the video and
audio of a playback component are being output to
a TV via the receiver. If the power supply of the
receiver is not turned on, neither video nor audio is
transmitted.
18GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Connecting a DVD player/DVD
recorder
To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
The following illustration shows how to
connect a DVD player or DVD recorder.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
DVD player/DVD recorder
Audio signals
Video signals
A
B
D
C
DIGITAL
OPTICAL
ATENNA
Y
VIDEO
IN
1
P
B/CB
R/CR
MONITOR
AM
VIDEO
IN
2
P
VIDEO IN
VIDEO IN
VIDEO IN
VIDEO OUT
DVD
IN
VIDEO
IN
2
MONITOR
OUT
COMPONENT VIDEO
DVD IN
R
R
L
L
COAXIAL
+
+
+
L
L
L
AUDIO
OUT
R
R
R
AUDIO IN
AUDIO IN
AUDIO IN
AUDIO IN
SUB
SURROUND
CENTER
SA-CD/CD DVD VIDEO 2
VIDEO 1 WOOFER
SPEAKERS
ACoaxial digital cord (supplied)
BAudio cord (not supplied)
CComponent video cord (not supplied)
DVideo cord (not supplied)
continued
19GB
Download from Www.Somanuals.com. All Manuals Search And Download.
If you connect a DVD recorder
• Be sure to change the factory setting of the
DVD input button on the remote so that you
can use the button to control your DVD
recorder. For details, see “Changing button
• You can also rename the DVD input so that
it can be displayed on the receiver’s display.
• You cannot do recording on the DVD
recorder via this receiver. For details, refer to
the operating instructions supplied with the
DVD recorder.
20GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Connecting a satellite tuner/
set-top box
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
The following illustration shows how to
connect a satellite tuner or set-top box.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
Satellite tuner/Set-top box
Audio signals
Video signals
B
C
D
A
DIGITAL
OPTICAL
ANTENNA
Y
VIDEO
IN
1
P
B/CB
R/CR
MONITOR
AM
VIDEO
IN
2
P
VIDEO IN
VIDEO IN
VIDEO IN
VIDEO OUT
DVD
IN
VIDEO
IN
2
MONITOR
OUT
COMPONENT VIDEO
DVD IN
R
R
L
L
COAXIAL
+
+
+
L
L
L
AUDIO
OUT
R
R
R
AUDIO IN
AUDIO IN
AUDIO IN
AUDIO IN
SUB
SURROUND
CENTER
SA-CD/CD DVD VIDEO 2
VIDEO 1 WOOFER
SPEAKERS
AAudio cord (not supplied)
BOptical digital cord (not supplied)
CVideo cord (not supplied)
DComponent video cord (not supplied)
21GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a VCR
The following illustration shows how to
connect a VCR.
VCR
A
DIGITAL
OPTICAL
ANTENNA
Y
VIDEO
IN
1
P
B/CB
R/CR
MONITOR
AM
VIDEO
IN
2
P
VIDEO IN
VIDEO IN
VIDEO IN
VIDEO OUT
DVD
IN
VIDEO
IN
2
MONITOR
OUT
COMPONENT VIDEO
DVD IN
R
R
L
L
COAXIAL
+
+
+
L
L
L
AUDIO
OUT
R
R
R
AUDIO IN
AUDIO IN
AUDIO IN
AUDIO IN
SUB
SURROUND
CENTER
SA-CD/CD DVD VIDEO 2
VIDEO 1 WOOFER
SPEAKERS
AAudio/video cord (not supplied)
Note
You cannot do recording on the VCR via this
receiver. For details, refer to the operating
instructions supplied with the VCR.
22GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4: Connecting the antennas
Connect the supplied AM loop antenna and
FM wire antenna.
FM wire antenna (supplied)
AM loop antenna (supplied)
DIGITAL
OPTICAL
ANTENNA
Y
VIDEO
IN
1
P
B/CB
R/CR
MONITOR
AM
VIDEO
IN
2
P
VIDEO IN
VIDEO IN
VIDEO IN
VIDEO OUT
DVD
IN
VIDEO
IN
2
MONITOR
OUT
COMPONENT VIDEO
DVD IN
R
R
L
L
COAXIAL
+
+
+
L
L
L
AUDIO
OUT
R
R
R
AUDIO IN
AUDIO IN
AUDIO IN
AUDIO IN
SUB
SURROUND
CENTER
SA-CD/CD DVD VIDEO 2
VIDEO 1 WOOFER
SPEAKERS
Notes
• To prevent noise pickup, keep the AM loop
antenna away from the receiver and other
components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as
horizontal as possible.
23GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing initial setup
operations
5: Preparing the receiver
and the remote
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
Be sure to use the buttons on the receiver for
this operation.
AC power cord
1,2
2CH
A.F.D.
MOVIE
MUSIC
DISPLAY
DIMMER
?/1
AMP MENU
ENTER
MASTER
VOLUME
AUTO CAL MIC
MEMORY
FM MODE
PRESET TUNING
TUNING
+
+
VIDEO
1
VIDEO
2
DVD
SA-CD/CD
FM
AM
INPUT MODE
PHONES
R
R
L
L
+
3
1 Press ?/1 to turn off the
FRONT
receiver.
2 Hold down ?/1 for 5 seconds.
“PUSH” and “ENTER” appears on the
display alternately.
To the wall outlet
3 Press ENTER.
After “CLEARING” appears on the
display for a while, “CLEARED”
appears.
The following items are reset to their
factory settings.
• All settings in the LEVEL, TONE,
SUR, TUNER, AUDIO and SYSTEM
menus.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• All index names for inputs and preset
stations.
• MASTER VOLUME is set to “VOL
MIN”.
• Input is set to “DVD”.
24GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting batteries into the
remote
6: Calibrating the
appropriate settings
automatically
Insert two R6 (size-AA) batteries in the
RM-AAU006 remote commander.
Observe the correct polarity when installing
batteries.
(AUTO CALIBRATION)
This receiver is equipped with DCAC (Digital
Cinema Auto Calibration) Technology which
allows you to perform automatic calibration as
follows:
• Check the connection between each speaker
and the receiver.
• Adjust the speaker level.
• Measure the distance of each speaker to your
listening position.
You can also adjust the speaker levels and
balance manually. For details, see
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with old ones.
• Do not mix alkaline batteries and other kinds of
batteries.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
Before you perform Auto
Calibration
• If you do not intend to use the remote for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
Before you perform Auto Calibration, install
• The AUTO CAL MIC jack is used for the
supplied optimizer microphone only. Do not
connect other microphones to this jack.
Doing so may damage the receiver and the
microphone.
• During calibration, the sound that comes out
of the speakers is very loud. Pay attention to
the presence of children or to the effect on
your neighborhood.
Tip
Under normal conditions, the batteries should last
for about 3 months. When the remote no longer
operates the receiver, replace all the batteries with
new ones.
• Perform Auto Calibration in a quiet
environment to avoid the effect of noise and
to get a more accurate measurement.
• If there are any obstacles in the path between
the optimizer microphone and the speakers,
the calibration cannot be performed
correctly. Remove any obstacles from the
measurement area to avoid measurement
error.
continued
25GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Performing Auto Calibration
The Auto Calibration function does not work when
headphones are connected.
TV ?/1
?/1
TV/VIDEO AUTO
SLEEP CAL
AV
?/1
2CH
A.F.D.
MOVIE
MUSIC
DISPLA
Y
DIMMER
?/1
AUTO
CAL
Optimizer microphone
AMP MENU
ENTER
MASTER
VOLUME
?/1 switch
AUTO CAL MIC
MEMORY
FM MODE
PRESET TUNING
TUNING
+
+
VIDEO
1
VIDEO
2
DVD
SA-CD/CD
FM
AM
PHONES
INPUT MODE
SYSTEM STANDBY
DVD SA-CD/CD
VIDEO 1 VIDEO 2
Input
buttons
TUNER AMP MENU
AMP
MENU
2CH
A.F.D.
MOVIE
MUSIC
DUAL MONO
FM MODE
1
4
7
2
5
3
6
9
D.TUNING
D.SKIP
8
MEMORY DVD MENU
ENTER
>10/
-
0/10
CLEAR
MUTING
TV VOL
DISPLAY
TOOLS
MUTING
F
f
MASTER VOL
G
g
MASTER
VOL +/–
RETURN/EXIT
MENU
Press AMP MENU, then press
AUTO CAL.
Measurement starts in 5 seconds and the
display changes as follows:
A.CAL [5] t A.CAL [4] t A.CAL [3] t
A.CAL [2] t A.CAL [1]
1 Connect the supplied optimizer
microphone to the AUTO CAL
MIC jack.
While the time is counting down, stand away
from the measurement area to avoid
measurement error.
The table below shows the display when
measurement starts.
2 Set up the optimizer
microphone.
Place the optimizer microphone at your
listening position.You can also use a stool
or tripod so that the optimizer
microphone remains at the same height as
your ears.
Measurement for
Display
Environment noise level NOISE.CHK
Speaker connection
MEASURE and SP
DET. appears
alternately*
Speaker level
MEASURE and GAIN
appears alternately*
Speaker distance
MEASURE and
DISTANCE appears
alternately*
* The corresponding speaker indicator lights up in
the display during measurement.
26GB
Download from Www.Somanuals.com. All Manuals Search And Download.
The measurement process will take a few
minutes to complete.
When measurement ends, “COMPLETE”
appears on the display and the settings are
registered.
Error codes and remedies
Error
code
Explanation
Remedies
ERROR 10 The environment Make sure the
is too noisy.
environment is
quiet during Auto
Calibration.
After you have finished
Disconnect the optimizer microphone from the
receiver.
ERROR 11 The speakers are Placeyourspeakers
placed too near further away from
the optimizer
microphone.
the optimizer
microphone.
Note
Auto Calibration cannot detect the sub woofer.
Therefore, the sub woofer settings will be
maintained.
ERROR 20 The front
Check the front
speakers are not speakers
detected or only connection.
one front speaker
Tip
is detected.
The Auto Calibration function will be canceled
when you do the following during the measurement
process:
– Press ?/1, input buttons or MUTING.
– Change the volume level.
– Press AUTO CAL again.
ERROR 21 Only one
Check the surround
surround speaker speakers
is detected.
connection.
Warning codes
During Auto Calibration, the warning code
provides information on the measurement
result. The warning code will appear on the
display cyclically as follows:
Error and warning codes
Error codes
Warning code t blank display t (warning
code t blank display) t PUSH t blank
display t ENTER
b)
When an error is detected during Auto
Calibration, an error code will appear on the
display cyclically after each measurement
process as follows:
b)
Appears when there are more than one warning
code.
Error code tblank display t(error code t
a)
blank display) t PUSH t blank display
You can choose to ignore the warning code as
the Auto Calibration function will
automatically adjust the settings. You can also
change the settings manually.
t ENTER
a)
Appears when there are more than one error code.
To rectify the error
To change the settings
manually
1 Record down the error code.
2 Press
.
1 Record down the warning code.
You can also use ENTER on the receiver.
3 Press ?/1 to turn off the receiver.
4 Rectify the error.
2 Press
.
You can also use ENTER on the receiver.
3 Press ?/1 to turn off the receiver.
4 Follow the solution provided in the
5 Turn on the receiver and perform Auto
For details, see “Error codes and remedies”
below.
5 Turn on the receiver and perform Auto
Calibration again (page 26).
continued
27GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning codes and solutions
7: Adjusting the speaker
levels and balance
(TEST TONE)
Warning Explanation
code
Solution
WARN. 40 The environment Make sure the
is noisy.
environment is
quiet during Auto
Calibration.
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
WARN. 50 The center speaker Be sure to connect
is not connected. the center speaker.
WARN. 51 The surround
Be sure to connect
speakers.
speakers are not the surround
connected.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
WARN. 60 The front speakers Reposition your
c)
balance are out of front speakers.
range.
TV ?/1
?/1
TV/VIDEO AUTO
SLEEP CAL
AV
?/1
WARN. 62 The center speaker Reposition your
d)
level is out of
range.
center speaker.
SYSTEM STANDBY
DVD SA-CD/CD
VIDEO 1 VIDEO 2
Input
buttons
TUNER AMP MENU
WARN. 63 The surround left Reposition your
1
speakerlevelisout surround left
e)
2CH
A.F.D.
MOVIE
MUSIC
DUAL MONO
FM MODE
of range.
speaker.
WARN. 64 The surround right Reposition your
1
4
7
2
5
3
6
9
speakerlevelisout surround right
f)
of range.
speaker.
WARN. 70 The front speakers Reposition your
D.TUNING
D.SKIP
c)
8
distance are out of front speakers.
MEMORY DVD MENU
ENTER
range.
>10/
-
0/10
CLEAR
WARN. 72 The center speaker Reposition your
d)
MUTING
TV VOL
DISPLAY
TOOLS
distance is out of center speaker.
range.
F
f
MASTER VOL
WARN. 73 The surround left Reposition your
G
g
2-5
speaker distance is surround left
out of range.
MASTER
VOL +/–
e)
speaker.
RETURN/EXIT
MENU
WARN. 74 The surround right Reposition your
speaker distance is surround right
f)
out of range.
speaker.
1 Press AMP MENU.
c)
d)
e)
f)
“1-LEVEL” appears on the display.
For details, refer “Front speakers distance”
For details, refer “Center speaker distance”
For details, refer “Surround left speaker distance”
For details, refer “Surround right speaker
2 Press
or b to enter the
menu.
You can also use ENTER or i on the
receiver.
3 Press V/v repeatedly to select
“T. TONE”.
You can also use U or u on the receiver.
28GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press
or b to enter the
parameter.
You can also use ENTER or i on the
receiver.
5 Press V/v repeatedly to select
“T. TONE Y”.
You can also use U or u on the receiver.
The test tone is output from each speaker
in sequence as follows:
Front left t Center t Front right t
Surround right t Surround left t Sub
woofer
6 Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
For details, see “Adjusting the level
Tips
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
• The adjusted value are shown on the display
during adjustment.
To turn off the test tone
N”.
You can also press any input buttons.
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely.
• The speaker cords may have the short-circuit
problem.
29GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press MASTER VOL +/– to
Playback
adjust the volume.
You can also use MASTER VOLUME on
the receiver.
Selecting a component
SYSTEM STANDBY
VIDEO 1 VIDEO 2
DVD
SA-CD/CD
To mute the sound
Press MUTING.
1
TUNER AMP MENU
The muting function will be canceled when
you do the following.
• Press MUTING again.
• Increase the volume.
2CH
A.F.D.
MOVIE
MUSIC
DUAL MONO
FM MODE
1
4
7
2
5
3
6
9
• Turn off the receiver.
D.TUNING
D.SKIP
8
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
MEMORY DVD MENU
ENTER
>10/
-
0/10
CLEAR
MUTING
TV VOL
DISPLAY
TOOLS
MUTING
F
f
MASTER VOL
G
g
To listen to the sub woofer
Be sure to use the buttons on the sub woofer
for this operation.
3
RETURN/EXIT
TV CH –
MENU
TV CH +
PRESET – REPLAY ADVANCE PRESET +
1 Press POWER.
.
<
<
>
The POWER indicator lights up.
2 Turn LEVEL to adjust the volume.
Set the volume level to suit your preference
according to the selected input as slight
adjustments may enhance the sound.
1 Press one of the input buttons
to select the component you
want.
The selected input appears on the display.
Note
Do not set the volume of the sub woofer to
maximum as extraneous noise may be heard.
Selected input Components that can
[Display]
be played back
VIDEO 1 or
VIDEO 2
VCR, etc., connected to the
VIDEO 1 or VIDEO 2 jack
[VIDEO 1 or
VIDEO 2]
DVD
DVD player, etc.,
[DVD]
connected to DVD jack
SA-CD/CD
[SA-CD/CD]
Super Audio CD/CD
player, etc., connected to
the SA-CD/CD jack
TUNER
Built-in radio tuner
[FM or AM band]
2 Turn on the component and
start playback.
30GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening/Watching a component
Listening to a Super Audio CD/CD
TV ?/1
?/1
TV/VIDEO AUTO
AV
?/1
SLEEP
CAL
2
3
SYSTEM STANDBY
DVD SA-CD/CD
VIDEO
1
VIDEO
2
TUNER AMP MENU
2CH
A.F.D.
MOVIE
MUSIC
DUAL MONO
FM MODE
2CH
A.F.D.
MOVIE
MUSIC
DISPLAY
DIMMER
?/1
1
4
7
2
5
3
6
9
D.TUNING
D.SKIP
8
>10/
-
MEMORY DVD MENU
ENTER
AMP MENU
ENTER
MASTER
VOLUME
0/10
CLEAR
DISPLAY
TOOLS MUTING
AUTO CAL MIC
MEMORY
FM MODE
PRESET TUNING
TUNING
+
+
F
f
VIDEO
1
VIDEO
2
DVD
SA-CD/CD
FM
AM
TV VOL
MASTER VOL
G
g
5
3
INPUT MODE
PHONES
5
RETURN/EXIT
MENU
TV CH
–
TV CH
+
+
PRESET
.
–
REPLAY ADVANCE PRESET
<
<
>
TUNING
–
TUNING
+
m
H
X
M
TV
x
Notes
1 Turn on the Super Audio CD player or CD
• The operation is described for a
Sony Super Audio CD player.
• Refer to the operating
instructions supplied with the
Super Audio CD player or CD
player.
player, then place the disc on the tray.
2 Turn on the receiver.
3 Press SA-CD/CD.
4 Play back the disc.
5 Adjust to a suitable volume.
Tips
• You can select the sound field to
suit the music. Refer to page 43
for details.
6 After you have finished listening to the
Super Audio CD/CD, eject the disc and turn
off the receiver and Super Audio CD player/
CD player.
Recommended sound fields:
Classical: HALL
Jazz: JAZZ
Live concert: CONCERT
• You can listen to the sound that
was recorded in the 2 channel
format from all speakers (multi
details.
31GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching a DVD
TV ?/1
?/1
TV/VIDEO AUTO
AV
?/1
SLEEP
CAL
SYSTEM STANDBY
DVD SA-CD/CD
2
3
VIDEO
1
VIDEO
2
TUNER AMP MENU
2CH
A.F.D.
2
MOVIE
MUSIC
DUAL MONO
FM MODE
2CH
A.F.D.
MOVIE
MUSIC
DISPLAY
DIMMER
?/1
1
4
7
3
6
9
5
8
D.TUNING
D.SKIP
>10/
-
MEMORY DVD MENU
ENTER
AMP MENU
ENTER
MASTER
VOLUME
0/10
CLEAR
DISPLAY
TOOLS MUTING
AUTO CAL MIC
MEMORY
FM MODE
PRESET TUNING
TUNING
+
+
F
f
VIDEO
1
VIDEO
2
DVD
SA-CD/CD
FM
AM
TV VOL
MASTER VOL
7
3
G
g
7
INPUT MODE
PHONES
RETURN/EXIT
MENU
TV CH
–
TV CH
+
+
PRESET
–
REPLAY ADVANCE PRESET
.
<
<
>
TUNING
–
TUNING
+
m
H
X
M
TV
x
Notes
1 Turn on the TV and DVD player.
2 Turn on the receiver.
3 Press DVD.
• Refer to the operating
instructions supplied with the
TV and DVD player.
• Check the following if you
cannot listen to multi channel
sound.
– Be sure the sound source
corresponds to the multi
channel format.
– Be sure this receiver is
connected to the DVD player
via a digital connection.
– Be sure the digital audio
output of the DVD player is
set up properly.
4 Switch the input of the TV so that an image
of the DVD is displayed.
5 Set up the DVD player.
Refer to “Quick Setup Guide” supplied with the receiver.
6 Play back the disc.
7 Adjust to a suitable volume.
8 After you have finished watching the DVD,
eject the disc and turn off the receiver, TV
and DVD player.
Tips
• Select the audio format of the
disc to be played, if necessary.
• You can select the sound field to
suit the movie/music. Refer to
Recommended sound fields:
Movie: C.ST.EX
Music: CONCERT
32GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press V/v repeatedly to select
the parameter you want to
adjust.
Amplifier Operations
You can also use U or u on the receiver.
Navigating through
menus
By using the amplifier menus, you can make
various adjustments to customize the receiver.
5 Press
or b to enter the
parameter.
You can also use ENTER or i on the
receiver.
VIDEO 1 VIDEO 2
DVD
SA-CD/CD
6 Press V/v repeatedly to select
TUNER AMP MENU
the setting you want.
1
You can also use U or u on the receiver.
The setting is entered automatically.
2CH
A.F.D.
MOVIE
MUSIC
DUAL MONO
FM MODE
1
4
7
2
5
3
6
9
To return to the previous
display
Press B.
D.TUNING
D.SKIP
8
MEMORY DVD MENU
ENTER
>10/
-
You can also use I on the receiver.
0/10
CLEAR
MUTING
TV VOL
DISPLAY
TOOLS
To exit the menu
F
f
MASTER VOL
Press AMP MENU.
G
g
2-6
Note
Some parameters and settings may appear dimmed
on the display. This means that they are either
unavailable or fixed and unchangeable.
RETURN/EXIT
TV CH –
MENU
TV CH +
PRESET – REPLAY ADVANCE PRESET +
.
<
<
>
1 Press AMP MENU.
“1-LEVEL” appears on the display.
2 Press V/v repeatedly to select
the menu you want.
You can also use U or u on the receiver.
3 Press
or b to enter the
menu.
You can also use ENTER or i on the
receiver.
33GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the menus
The following options are available in each
menu. For details on navigating through
Menu
[Display]
Parameters
[Display]
Settings
Initial setting
a)
LEVEL
Test tone
T. TONE Y, T. TONE N
T. TONE N
[1-LEVEL]
[T. TONE]
a)
Front speaker balance
[FRT BAL]
BAL. L +1 to BAL. L +8, BALANCE, BALANCE
BAL. R +1 to BAL. R +8
Center speaker level
[CNT LVL]
CNT –10 dB to CNT +10 dB
(1 dB step)
CNT 0 dB
SUR L 0 dB
SUR R 0 dB
SW 0 dB
Surround left speaker level
[SL LVL]
SUR L –10 dB to SUR L +10 dB
(1 dB step)
Surround right speaker level
[SR LVL]
SUR R –10 dB to SUR R +10 dB
(1 dB step)
Sub woofer level
[SW LVL]
SW –10 dB to SW +10 dB
(1 dB step)
a)
Dynamic range compressor
[D. RANGE]
COMP. OFF, COMP. STD,
COMP. MAX
COMP. OFF
BASS 0 dB
TRE 0 dB
TONE
[2-TONE]
Front speaker bass level
[BASS LVL]
BASS –6 dB to BASS +6 dB
(1 dB step)
Front speaker treble level
[TRE LVL]
TRE –6 dB to TRE +6 dB
(1 dB step)
a)
SUR
[3-SUR]
Sound field selection
[S.F. SELCT]
2CH ST., A.F.D. AUTO, DOLBY PL, A.F.D. AUTO
PLII MV, PLII MS, MULTI ST.,
C.ST.EX A, C.ST.EX B, C.ST.EX C,
HALL, JAZZ, CONCERT
a)
Effect level
[EFFECT]
EFCT. MIN, EFCT. STD,
EFCT. MAX
EFCT. STD
FM AUTO
a)
TUNER
FM station receiving mode
[FM MODE]
FM AUTO, FM MONO
[4-TUNER]
a)
Naming preset stations
[NAME IN]
34GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
[Display]
Parameters
[Display]
Settings
Initial setting
AUDIO
[5-AUDIO]
Digital audio input decoding
priority
[DEC. PRI.]
DEC. AUTO, DEC. PCM
DEC. AUTO
for:
VIDEO 1,
VIDEO 2;
DEC. PCM for:
DVD
a)
Digital broadcast language
selection
DUAL M/S, DUAL M,
DUAL S, DUAL M+S
DUAL M
a)
[DUAL]
Synchronizes audio with video A.V.SYNC. Y, A.V.SYNC. N
output
A.V.SYNC. N
a)
[A.V. SYNC.]
a)
Naming inputs
[NAME IN]
a)
SYSTEM
[6-SYSTEM]
Front speakers distance
[FRT DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
DIST. 3.0 m
a)
Center speaker distance
[CNT DIST.]
DIST. xx m
between front speaker distance
and 1.5 m (0.1 m step)
a)
Surround left speaker distance DIST. xx m
[SL DIST.] between front speaker distance
and 4.5 m (0.1 m step)
DIST. 3.0 m
DIST. 3.0 m
a)
Surround right speaker distance DIST. xx m
[SR DIST.]
between front speaker distance
and 4.5 m (0.1 m step)
a)
Surround speaker position
[SUR POS.]
SIDE/LO, SIDE/HI, BEHD/LO,
BEHD/HI
SIDE/LO
0% dim
a)
Brightness of the display
[DIMMER]
0% dim, 40% dim, 70% dim
a)
A. CAL
Auto calibration
A.CAL YES, A.CAL NO
A.CAL NO
[7-A. CAL]
[AUTO CAL.]
a)
For details, refer to the page in the parentheses.
35GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x D. RANGE (Dynamic range
compressor)
Adjusting the level
Lets you compress the dynamic range of the
sound track. This may be useful when you
want to watch movies at low volumes late at
night. Dynamic range compression is possible
with Dolby Digital sources only.
• COMP. OFF
(LEVEL menu)
You can use the LEVEL menu to adjust the
balance and level of each speaker. These
settings are applied to all sound fields.
Select “1-LEVEL” in the amplifier menus. For
details on adjusting the parameters, see
The dynamic range is not compressed.
• COMP. STD
The dynamic range is compressed as
intended by the recording engineer.
• COMP. MAX
The dynamic range is compressed
dramatically.
LEVEL menu parameters
x T. TONE (Test tone)
Tip
Lets you adjust the speaker levels and balance
while listening to the test tone from your
listening position. For details, see “7:
Dynamic range compressor lets you compress the
dynamic range of the soundtrack based on the
dynamic range information included in the Dolby
Digital signal.
“COMP. STD” is the standard setting, but it only
enacts light compression. Therefore, we recommend
using the “COMP. MAX” setting. This greatly
compresses the dynamic range and lets you view
movies late at night at low volumes. Unlike analog
limiters, the levels are predetermined and provide a
very natural compression.
x FRT BAL (Front speaker
balance)
Lets you adjust the balance between front left
and right speakers.
x CNT LVL (Center speaker level)
x SL LVL (Surround left speaker
level)
x SR LVL (Surround right speaker
level)
x SW LVL (Sub woofer level)
36GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the tone
Settings for the surround
sound
(TONE menu)
(SUR menu)
You can use the TONE menu to adjust the
tonal quality (bass/treble level) of the front
speakers.
Select “2-TONE” in the amplifier menus. For
details on adjusting the parameters, see
You can use the SUR menu to select the sound
field you want for your listening pleasure.
Select “3-SUR” in the amplifier menus. For
details on adjusting the parameters, see
TONE menu parameters
SUR menu parameters
x BASS LVL (Front speaker bass
x S.F. SELCT (Sound field
selection)
level)
Lets you select the sound field you want. For
details, see “Enjoying Surround Sound” (page
42).
x TRE LVL (Front speaker treble
level)
Note
The receiver lets you apply the last selected sound
field to an input whenever it is selected (Sound Field
Link). For example, if you select “HALL” for the
SA-CD/CD input, then change to a different input
and then return to SA-CD/CD, “HALL” will
automatically be applied again.
x EFFECT (Effect level)
Lets you adjust the “presence” of the surround
effect for sound fields selected with the
MOVIE or MUSIC button and for “HP
THEA” sound field.
• EFCT. MIN
The surround effect is minimum.
• EFCT. STD
The surround effect is standard.
• EFCT. MAX
The surround effect is maximum.
37GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings for the tuner
(TUNER menu)
Settings for the audio
(AUDIO menu)
You can use the TUNER menu to set the FM
station receiving mode and to name preset
stations.
Select “4-TUNER” in the amplifier menus.
For details on adjusting the parameters, see
You can use the AUDIO menu to make
settings for the audio to suit your preference.
Select “5-AUDIO” in the amplifier menus. For
details on adjusting the parameters, see
AUDIO menu parameters
TUNER menu parameters
x DEC. PRI. (Digital audio input
decoding priority)
Lets you specify the input mode for the digital
signal input to the DIGITAL IN jacks.
• DEC. AUTO
Automatically switches the input mode
between DTS, Dolby Digital or PCM.
• DEC. PCM
x FM MODE (FM station receiving
mode)
• FM AUTO
This receiver will decode the signal as stereo
signal when the radio station is broadcast in
stereo.
• FM MONO
This receiver will decode the signal as mono
signal regardless of the broadcast signal.
PCM signals are given priority (to prevent
interruption when playback starts).
However, when other signals are input, there
may be no sound depending on the format.
In this case, set to “DEC. AUTO”.
x NAME IN (Naming preset
stations)
Lets you set the name of preset stations. For
details, see “Naming preset stations” (page
49).
Note
When set to “DEC. AUTO” and the sound from the
digital audio jacks (for a CD, etc.) is interrupted
when playback starts, set to “DEC. PCM”.
38GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x DUAL (Digital broadcast
language selection)
Lets you select the language you want to listen
to during digital broadcast. This feature only
functions for Dolby Digital sources.
• DUAL M/S (Main/Sub)
Sound of the main language will be output
through the front left speaker and sound of
the sub language will be output through the
front right speaker simultaneously.
• DUAL M (Main)
Settings for the system
(SYSTEM menu)
You can use the SYSTEM menu to set the
distance of the speakers connected to this
receiver.
Select “6-SYSTEM” in the amplifier menus.
For details on adjusting the parameters, see
Sound of the main language will be output.
• DUAL S (Sub)
Sound of the sub language will be output.
• DUAL M+S (Main + Sub)
SYSTEM menu parameters
Mixed sound of both the main and sub
languages will be output.
x FRT DIST. (Front speakers
distance)
Lets you set the distance from your listening
position to the front speakers (A).
If both front speakers are not placed an equal
distance from your listening position, set the
distance as the average distance between the
front speakers.
x A.V. SYNC. (Synchronizes audio
with video output)
• A.V.SYNC. Y (Yes) (Delay time: 68 ms)
The audio output is delayed so that the time
gap between the audio output and visual
display is minimized.
• A.V.SYNC. N (No) (Delay time: 0 ms)
The audio output is not delayed.
B
A
A
Notes
30˚ 30˚
• This parameter is useful when you use a large LCD
100˚-120˚
100˚-120˚
or plasma monitor or a projector.
• This parameter is valid only when you use a sound
field selected with the 2CH or A.F.D. buttons.
• This parameter is not valid when PCM 96 kHz or
DTS 2048 signals are input.
C
D
x NAME IN (Naming inputs)
Lets you set the name of inputs. For details,
x CNT DIST. (Center speaker
distance)
Lets you set the distance from your listening
position to the center speaker. Center speaker
distance should be set from a distance equal to
the front speaker distance (A) to a distance
1.5 meters closer to your listening position
(B).
continued
39GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x SL DIST. (Surround left speaker
distance)
x SUR POS. (Surround speaker
position)
Lets you specify the location of your surround
speakers for proper implementation of the
surround effects in the CINEMA STUDIO EX
Lets you set the distance from your listening
position to the surround left speaker. Surround
left speaker distance should be set from a
distance equal to the front speaker distance
x SR DIST. (Surround right
speaker distance)
Lets you set the distance from your listening
position to the surround right speaker.
Surround right speaker distance should be set
from a distance equal to the front speaker
page 39).
Tip
The receiver lets you to input the speaker position in
terms of distance. However, it is not possible to set
the center speaker further than the front speakers.
Also, the center speaker cannot be set more than
1.5 meters closer from the front speakers.
Likewise, the surround speakers can not be set
further away from the listening position than the
front speakers. And they can be no more than
4.5 meters closer. This is because incorrect speaker
placement is not conducive to the enjoyment of
surround sound.
Please note that, setting the speaker distance closer
than the actual location of the speakers will cause a
delay in the output of the sound from that speaker. In
other words, the speaker will sound like it is further
away.
For example, setting the center speaker distance
1–2 meters closer than the actual speaker position
will create a fairly realistic sensation of being
“inside” the screen. If you cannot obtain a
satisfactory surround effect because the surround
speakers are too close, setting the surround speaker
distance closer (shorter) than the actual distance will
create a larger sound stage.
• SIDE/LO
Select if the location of your surround
speakers corresponds to sections A and C.
• SIDE/HI
Select if the location of your surround
speakers corresponds to sections A and D.
• BEHD/LO
Select if the location of your surround
speakers corresponds to sections B and C.
• BEHD/HI
Select if the location of your surround
speakers corresponds to sections B and D.
Adjusting these parameter while listening to the
sound often results in much better surround sound.
Give it a try!
40GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
Surround speaker position is designed specifically
for implementation of the CINEMA STUDIO EX
modes. For other sound fields, speaker position is
not so critical.
Those sound fields were designed under the premise
that the surround speakers would be located behind
the listening position, but presentation remains
fairly consistent even with the surround speakers
positioned at a rather wide angle. However, if the
speakers are pointing toward the listener from the
immediate left and right of the listening position, the
surround effects become unclear unless set to
“SIDE/LO” or “SIDE/HI”.
Calibrating the
appropriate settings
automatically
(A. CAL menu)
For details, see “6: Calibrating the appropriate
Nevertheless, each listening environment has many
variables, such as wall reflections, and you may
obtain better results using “BEHD/HI” if your
speakers are located high above the listening
position, even if they are located to the immediate
left and right.
Therefore, although it may result in a setting
contrary to the above explanation, we recommend
that you playback multi channel surround encoded
software and select the setting that provides a good
sense of spaciousness and that best succeeds in
forming a cohesive space between the surround
sound from the surround speakers and the sound of
the front speakers. If you are not sure which sounds
best, select “BEHD/LO” or “BEHD/HI” and then
use the speaker distance parameter and speaker level
adjustments to obtain proper balance.
x DIMMER (Brightness of the
display)
Lets you adjust the brightness in 3 steps.
You can also use DIMMER on the receiver.
41GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying Surround Sound
Enjoying Dolby Digital
and DTS Surround sound
(AUTO FORMAT DIRECT)
The Auto Format Direct (A.F.D.) mode allows
you to listen to higher fidelity sound and select
the decoding mode for listening to a 2 channel
stereo sound as multi channel sound.
2CH
A.F.D.
MOVIE
MUSIC
A.F.D.
DUAL MONO
1
2
3
Press A.F.D. repeatedly to select
the sound field you want.
For details, see “Types of A.F.D. mode” (page
42).
Types of A.F.D. mode
Decoding
mode
A.F.D. mode
[Display]
Multi channel
audio after
decoding
Effect
(Detecting
automatically) [A.F.D. AUTO]
A.F.D. AUTO
(Detecting
automatically)
Performs the sound as it was recorded/
encoded without adding any surround
effects. However, this receiver will
generate a low frequency signal for output
to the sub woofer when there is no LFE
signals.
Dolby Pro Logic PRO LOGIC
[DOLBY PL]
4 channel
Performs Dolby Pro Logic decoding. The
source recorded in 2 channel format is
decoded into 4.1 channels.
Dolby Pro Logic PRO LOGIC II MOVIE 5 channel
Performs Dolby Pro Logic II Movie mode
decoding. This setting is ideal for movies
encoded in Dolby Surround. In addition,
this mode can reproduce sound in 5.1
channel for watching videos of overdubbed
or old movies.
II
[PLII MV]
PRO LOGIC II MUSIC 5 channel
[PLII MS]
Performs Dolby Pro Logic II Music mode
decoding. This setting is ideal for normal
stereo sources such as CDs.
(Multi Stereo) MULTI STEREO
[MULTI ST.]
(Multi Stereo)
Outputs 2 channel left/right signals from
all speakers.
Note
Dolby Pro Logic and Dolby Pro Logic II decoding do not function for DTS format signals.
42GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a pre-
programmed sound field
You can take advantage of surround sound
simply by selecting one of the receiver’s pre-
programmed sound fields. They bring the
exciting and powerful sound of movie theaters
and concert halls into your home.
2CH
A.F.D.
MOVIE
MUSIC
2CH
MUSIC
MOVIE
DUAL MONO
1
2
3
A.F.D.
Press MOVIE repeatedly to select a
sound field for movies or press
MUSIC repeatedly to select a
sound field for music.
For details, see “Types of sound field
Types of sound field available
Sound field Sound field
Effect
for
[Display]
Movie
CINEMA STUDIO EX A Reproduces the sound characteristics of the Sony Pictures
DCS [C.ST.EX A]
Entertainment “Cary Grant Theater” cinema production studio.
This is a standard mode, great for watching almost any type of
movie.
CINEMA STUDIO EX B
DCS [C.ST.EX B]
Reproduces the sound characteristics of the Sony Pictures
Entertainment “Kim Novak Theater” cinema production studio.
This mode is ideal for watching science-fiction or action movies
with lots of sound effects.
CINEMA STUDIO EX C
DCS [C.ST.EX C]
Reproduces the sound characteristics of the Sony Pictures
Entertainment scoring stage. This mode is ideal for watching
musicals or films where orchestra music is featured in the
soundtrack.
Music
HALL [HALL]
Reproduces the acoustics of a classical concert hall.
Reproduces the acoustics of a jazz club.
JAZZ CLUB [JAZZ]
LIVE CONCERT
[CONCERT]
Reproduces the acoustics of a 300-seat live house.
Headphone
HEADPHONE 2CH
[HP 2CH]
This mode is selected automatically if you use headphones when
selected. Standard 2 channel stereo sources completely bypass
the sound field processing and multi channel surround formats
are downmixed to 2 channels.
HEADPHONE THEATER This mode is selected automatically if you use headphones when
DCS [HP THEA]
sound field for movie/music is selected. It allows you to
experience a theater-like environment while listening through a
pair of headphones.
continued
43GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
About DCS (Digital Cinema
Sound)
You can identify the encoding format of DVD
software, etc., by looking at the logo on the package.
Sound fields with DCS mark use DCS
technology. DCS is a unique sound
reproduction technology for home theater
developed by Sony, in cooperation with Sony
Pictures Entertainment, for enjoying the
exciting and powerful sound of movie theaters
at home. With this “Digital Cinema Sound”
developed by integrating a DSP (Digital signal
processor) and measured data, the ideal sound
field intended by filmmakers can be
experienced at home.
•
•
: Dolby Digital discs
: Dolby Surround
encoded programs
: DTS Digital Surround encoded
programs
•
To turn off the surround effect
for movie/music
Press 2CH to select “2CH ST.” or press A.F.D.
repeatedly to select “A.F.D. AUTO”.
About CINEMA STUDIO EX
modes
CINEMA STUDIO EX modes are suitable for
watching motion picture DVDs (etc.), with
multi channel surround effects. You can
reproduce the sound characteristics of Sony
Pictures Entertainment’s dubbing studio in
your home.
The CINEMA STUDIO EX modes consist of
the following three elements.
• Virtual Multi Dimension
Creates 5 sets of virtual speakers from a
single pair of actual surround speakers.
• Screen Depth Matching
Creates the sensation that the sound is
coming from inside the screen like in
theaters.
• Cinema Studio Reverberation
Reproduces the type of reverberation found
in theaters.
The CINEMA STUDIO EX modes integrate
these three elements simultaneously.
Notes
• The effects provided by the virtual speakers may
cause increased noise in the playback signal.
• When listening with sound fields that employ the
virtual speakers, you will not be able to hear any
sound coming directly from the surround speakers.
• This function does not work for signals with a
sampling frequency of more than 48 kHz.
44GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using only the front
Resetting sound fields to
speakers and sub woofer the initial settings
(2CH STEREO)
Be sure to use the buttons on the receiver for
this operation.
In this mode, the receiver outputs the sound
from the front left/right speakers and sub
woofer.
When multi channel surround formats are
input, the signals are downmixed to 2 channel
with bass frequencies being output from the
sub woofer.
1,2
2
2CH
A.F.D.
MOVIE
MUSIC
DISPLAY
DIMMER
?/
AMP MENU
ENTER
MASTER
VOLUME
AUTO CAL MIC
MEMORY
FM MODE
PRESET TUNING
TUNING
+
+
VIDEO
1
VIDEO
2
DVD
SA-CD/CD
FM
AM
INPUT MODE
PHONES
When standard 2 channel stereo sources are
input, the receiver’s bass redirection circuitry
will be activated. The front channel bass
frequencies will be output from the sub
woofer.
1 Press ?/1 to turn off the
receiver.
TUNER AMP MENU
2 While holding down 2CH, press
2CH
A.F.D.
MOVIE
MUSIC
?/1.
2CH
DUAL MONO
“S.F. CLR.” appears on the display and all
sound fields are reset to their initial
setting.
1
2
3
Press 2CH.
45GB
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Press TUNING + or TUNING –.
Tuner Operations
Press TUNING + to scan from low to
high; press TUNING – to scan from high
to low.
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas to the receiver (page 23).
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
If the FM stereo reception is poor and
“STEREO” flashes on the display, select
monaural audio so that the sound will be less
distorted.
Tip
The tuning scale is:
FM : 50 kHz
AM: 9 kHz
• To select monaural audio, you can
– press FM MODE repeatedly until the
“MONO” indicator lights up on the
display.
Automatic tuning
S
S
S
– set “FM MODE” in TUNER menu to “FM
VIDEO 1 VIDEO 2
DVD
SA-CD/CD
TUNER AMP MENU
• To return to stereo mode, you can
– press FM MODE repeatedly until the
“MONO” indicator on the display do not
light up.
– set “FM MODE” in TUNER menu to “FM
AUTO” (page 34).
2CH
A.F.D.
MOVIE
MUSIC
DUAL MONO
FM MODE
1
1
4
7
2
5
3
6
9
FM MODE
D.TUNING
D.SKIP
8
MEMORY DVD MENU
ENTER
>10/
-
0/10
CLEAR
MUTING
TV VOL
DISPLAY
TOOLS
F
f
MASTER VOL
G
g
RETURN/EXIT
TV CH –
MENU
TV CH +
PRESET – REPLAY ADVANCE PRESET +
.
<
<
>
TUNING –
TUNING +
m
H
M
2
1 Press TUNER repeatedly to
select the FM or AM band.
You can also use FM or AM on the
receiver.
46GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct tuning
Presetting radio stations
You can preset up to 30 FM stations and 30
AM stations. Then you can easily tune in the
stations you often listen to.
You can enter the frequency of a station
directly by using the numeric buttons.
VIDEO 1 VIDEO 2
DVD
SA-CD/CD
TUNER AMP MENU
Presetting radio stations
1
2CH
A.F.D.
MOVIE
MUSIC
DUAL MONO
FM MODE
S
S
S
1
4
7
2
5
3
6
9
VIDEO 1 VIDEO 2
DVD
SA-CD/CD
TUNER AMP MENU
3
D.TUNING
D.SKIP
8
2
4
2CH
A.F.D.
MOVIE
MUSIC
DUAL MONO
FM MODE
1
MEMORY DVD MENU
ENTER
>10/
-
0/10
CLEAR
1
4
7
2
5
3
6
9
4
1 Press TUNER repeatedly to
D.TUNING
D.SKIP
8
select the FM or AM band.
MEMORY DVD MENU
ENTER
>10/
-
0/10
You can also use FM or AM on the
receiver.
CLEAR
3,5
MUTING
TV VOL
DISPLAY
TOOLS
F
f
2 Press D.TUNING.
MASTER VOL
G
g
3 Press the numeric buttons to
enter the frequency.
RETURN/EXIT
TV CH –
MENU
TV CH +
Example 1: FM 102.50 MHz
Press 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Press 1 b 3 b 5 b 0
PRESET – REPLAY ADVANCE PRESET +
PRESET
+/–
.
<
<
>
TUNING –
TUNING +
m
H
M
4 Press ENTER.
1 Press TUNER repeatedly to
select the FM or AM band.
Tip
If you have tuned in an AM station, adjust the
direction of the AM loop antenna for optimum
reception.
You can also use FM or AM on the
receiver.
2 Tune in the station that you
want to preset using Automatic
If you cannot tune in a station
Make sure you have entered the right
still cannot tune in a station, the frequency is
not used in your area.
Switch the FM reception mode, if
continued
47GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press MEMORY.
Tuning to preset stations
“MEMORY” lights up for a few seconds.
“MEMORY” goes out.
S
S
S
VIDEO 1 VIDEO 2
DVD
SA-CD/CD
TUNER AMP MENU
4 Press the numeric buttons to
1
2CH
A.F.D.
MOVIE
MUSIC
DUAL MONO
FM MODE
select a preset number.
You can also press PRESET + or
PRESET – repeatedly to select a preset
number.
If “MEMORY” goes out before you
select the preset number, start again from
1
4
7
2
5
3
6
9
Numeric
buttons
D.TUNING
D.SKIP
8
MEMORY DVD MENU
ENTER
>10/
-
0/10
CLEAR
ENTER
MUTING
TV VOL
DISPLAY
TOOLS
5 Press ENTER.
F
f
The station is stored as the selected preset
number.
MASTER VOL
G
g
If “MEMORY” goes out before you press
ENTER, start again from step 3.
RETURN/EXIT
TV CH –
MENU
TV CH +
PRESET – REPLAY ADVANCE PRESET +
.
<
<
>
2
another station.
1 Press TUNER repeatedly to
select the FM or AM band.
You can also use FM or AM on the
receiver.
2 Press PRESET + or PRESET –
repeatedly to select the preset
station you want.
You can also use PRESET TUNING + or
PRESET TUNING – on the receiver.
Each time you press the button, you can
select a preset station as follows:
01
02
03
30
04
29
05
28
...
27
You can also press the numeric buttons to
select the preset station you want. Then,
press ENTER to enter the selection.
48GB
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Press
or b to enter the
Naming preset stations
parameter.
You can also use ENTER or i on the
receiver.
S
DVD
S
S
VIDEO 1 VIDEO 2
SA-CD/CD
The cursor flashes and you can select a
character. Follow the procedure given in
TUNER AMP MENU
3
1
2CH
A.F.D.
MOVIE
MUSIC
DUAL MONO
FM MODE
1
4
7
2
5
3
6
9
To create an index name
1 Use V/v/B/b to create an index name.
You can also use U/u/I/i on the receiver.
Press V/v to select a character, then press
B/b to move the cursor to the next position.
D.TUNING
D.SKIP
8
MEMORY DVD MENU
ENTER
>10/
-
0/10
CLEAR
MUTING
TV VOL
DISPLAY
TOOLS
If you made a mistake
F
f
MASTER VOL
Press B/b until the character you want to
change flashes, then press V/v to select the
correct character.
G
g
4-7
RETURN/EXIT
MENU
Tips
• You can select the character type as follows by
pressing V/v.
Alphabet (upper case) t Numbers t
Symbols
1 Press TUNER repeatedly to
select the FM or AM band.
You can also use FM or AM on the
receiver.
• To enter a blank space, you can
– press V/v repeatedly until a blank space
appears in the display.
– press b without input a character.
2 Tune in the preset station you
want to create an index name
2 Press
to enter the name.
You can also use ENTER on the receiver.
The entered name is registered.
3 Press AMP MENU.
“1-LEVEL” appears on the display.
Note
When you name an RDS station and tune in that
station, the Program Service name appears instead
of the name you entered. (You cannot change the
Program Service name. The name you entered will
be overwritten by the Program Service name.)
4 Press V/v repeatedly to select
“4-TUNER”.
You can also use U or u on the receiver.
5 Press
or b to enter the
menu.
You can also use ENTER or i on the
receiver.
6 Press V/v repeatedly to select
“NAME IN”.
You can also use U or u on the receiver.
49GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying RDS information
Using the Radio Data
System (RDS)
This receiver also allows you to use RDS
(Radio Data System), which enables radio
stations to send additional information along
with the regular program signal. You can
display RDS information.
While receiving an RDS station,
press DISPLAY repeatedly on the
receiver.
Each time you press the button, RDS
information on the display changes cyclically
as follows:
Program Service name t Frequency t
a)
Program Type indication t Radio Text
b)
Notes
indication t Current Time indication (in
• RDS is operable only for FM stations.
• Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are
not familiar with the RDS services in your area,
check with your local radio stations for details.
24-hour system mode) t Sound field
currently applied
a)
Type of program being broadcast.
Text messages sent by the RDS station.
b)
Notes
• If there is an emergency announcement by
government authorities, “ALARM” flashes in the
display.
• When the message consists of 9 characters or more,
the message scrolls across the display.
• If a station does not provide a particular RDS
service, “NO XXXX” (such as “NO TEXT”)
appears on the display.
Receiving RDS broadcasts
Simply select a station on the FM
Automatic Tuning (page 46), or
When you tune in a station that provides RDS
services, “RDS” lights up and the program
service name appears on the display.
Description of program types
Note
Program type Description
indication
RDS may not work properly if the station you tuned
to is not transmitting the RDS signal properly or if
the signal strength is weak.
NEWS
News programs
AFFAIRS
Topical programs that expand on
current news
INFO
Programs offering information on
a wide spectrum of subjects,
including consumer affairs and
medical advice
SPORT
Sports programs
EDUCATE
Educational programs, such as
“how-to” and advice programs
DRAMA
Radio plays and serials
CULTURE
Programs about national or
regional culture, such as language
and social concerns
SCIENCE
Programs about the natural
sciences and technology
50GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Program type Description
indication
Other Operations
VARIED
Other types of programs such as
celebrity interviews, panel
games, and comedy
Switching between
digital and analog audio
(INPUT MODE)
POP M
Popular music programs
Rock music programs
Easy Listening
ROCK M
EASY M
LIGHT M
Instrumental, vocal, and choral
music
You can select the audio input mode setting
when you connect components to both digital
and analog audio input jacks on the receiver.
CLASSICS
OTHER M
Performances of major
orchestras, chamber music,
opera, etc.
1 Press input buttons to select
the input.
Music that does not fit into any
categories above, such as Rhythm
& Blues and Reggae
2 Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
WEATHER
FINANCE
Weather information
Stock market reports and trading,
etc.
The selected audio input mode appears on
the display.
CHILDREN
SOCIAL
Programs for children
Programs about people and the
things that affect them
Audio input modes
RELIGION
PHONE IN
Programs of religious content
x AUTO IN
Programs where members of the
public express their views by
phone or in a public forum
Gives priority to digital audio signals when
there are both digital and analog connections.
If there are no digital audio signals, analog
audio signals are selected.
TRAVEL
LEISURE
Programs about travel. Not for
announcements that are located
by TP/TA.
x COAX IN
Specifies the digital audio signals input to the
DIGITAL COAXIAL jack.
Programs on recreational
activities such as gardening,
fishing, cooking, etc.
JAZZ
Jazz programs
x OPT IN
Specifies the digital audio signals input to the
DIGITAL OPTICAL jack.
COUNTRY
NATION M
Country music programs
Programs featuring the popular
music of the country or region
x ANALOG
OLDIES
FOLK M
Programs featuring oldies music
Folk music programs
Specifies the analog audio signals input to the
AUDIO IN (L/R) jacks.
DOCUMENT Investigative features
NONE Any programs not defined above
Note
Some audio input modes may not be set up
depending on the input.
51GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Naming inputs
Changing the display
You can enter a name of up to 8 characters for
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with
the names of the connected components.
You can check the sound field, etc., by
changing the information on the display.
Be sure to use the button on the receiver for
this operation.
1 Press the input button to select
the input you want to create an
index name for.
Press DISPLAY repeatedly.
Each time you press the button, the display
changes cyclically as follows:
2 Press AMP MENU.
All inputs except the FM and AM
band
“1-LEVEL” appears on the display.
a)
Index name of the input t Selected input
3 Press V/v repeatedly to select
“5-AUDIO”.
t Sound field currently applied
You can also use U or u on the receiver.
FM and AM band
b)
4 Press
or b to enter the
Program Service name or preset station
a)
name t Frequency t Program Type
menu.
b)
b)
indication t Radio Text indication t
You can also use ENTER or i on the
receiver.
Current Time indication (in 24-hour system
b)
mode) t Sound field currently applied
5 Press V/v to select “NAME IN”.
a)
Index name appears only when you have assigned
You can also use U or u on the receiver.
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
6 Press
or b to enter the
parameter.
b)
You can also use ENTER or i on the
receiver.
The cursor flashes and you can select a
character. Follow the procedure given in
Note
Character or marks may not be displayed for some
languages.
52GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Sleep Timer
Using the Remote
You can set the receiver to turn off
automatically at a specified time.
Changing button
assignments
You can change the factory settings of the
input buttons to suit the components in your
system. For example, if you connect a DVD
recorder to the DVD jacks on the receiver, you
can set the DVD button on this remote to
control the DVD recorder.
Press SLEEP repeatedly while the
power is on.
Each time you press the button, the display
changes cyclically as follows:
2-00-00 t 1-30-00 t 1-00-00 t 0-30-00
t OFF
When sleep timer is being used, “SLEEP”
lights up on the display.
1 Hold down the input button of
which you want to change the
assignment.
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.
Example: Hold down DVD.
2 Referring to the table below,
press the corresponding
button for the category you
want.
Example: Press 4.
Now you can use the DVD button to
control the DVD recorder.
continued
53GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Categories and the
corresponding buttons
Additional Information
Categories
Press
a)
Glossary
VCR (command mode VTR 3)
1
2
3
a)
VCR (command mode VTR 2)
x Component video
DVD player/DVD recorder
A format for transmitting video signal
information consisting of three separate
signals: luminance Y, chrominance Pb, and
chrominance Pr. High quality pictures, such as
DVD video or HDTV pictures, are transmitted
more faithfully. The three jacks are color -
coded green, blue and red.
b)
(command mode DVD1)
DVD recorder
(command mode DVD3)
4
b)
CD player
5
6
7
8
9
MD deck
Tape deck B
x Composite video
Tuner (this receiver)
DVR (Digital CATV terminal)
A standard format for transmitting video
signal information. The luminance signal Y
and chrominance signal C are combined and
transmitted together.
DSS (Digital Satellite Receiver) 0/10
a)
Sony VCRs are operated with a VTR 2 or VTR 3
setting which correspond to 8 mm and VHS
respectively.
Sony DVD recorders are operated with a DVD1 or
DVD3 setting. For details, refer to the operating
instructions supplied with the DVD recorders.
x Dolby Digital
Digital audio encoding/decoding technology
developed by Dolby Laboratories, Inc. It
consists of front (left/right), center, surround
(left/right) and sub woofer channels. It is a
designated audio standard for DVD video and
also known as 5.1 channel surround. Since
surround information is recorded and
reproduced in stereo, more realistic sound with
fuller presence is delivered than with Dolby
surround.
b)
To clear all remote button
assignments
Press ?/1, AUTO CAL and MASTER VOL –
at the same time.
The remote is reset to its factory settings.
x Dolby Pro Logic II
This technology converts 2 channel stereo
recorded audio into 5.1 channel for playback.
There is a MOVIE mode for movies and
MUSIC mode for stereo sources such as
music. Old movies encoded in the traditional
stereo format can be enhanced with 5.1
channel surround sound.
54GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x Dolby Surround (Dolby Pro
Logic)
Precautions
Audio processing technology developed by
Dolby Laboratories, Inc. Center and mono
surround information is matrixed into two
stereo channels. When reproduced, audio is
decoded and output in 4 channel surround
sound. This is the most common audio
processing method for DVD video.
On safety
Should any solid object or liquid fall into the
cabinet, unplug the receiver and have it
checked by qualified personnel before
operating it any further.
x DTS Digital Surround
Digital audio encoding/decoding technology
for theaters developed by DTS, Inc. It
compresses audio less than Dolby Digital,
delivering a higher quality sound
reproduction.
On power sources
• Before operating the receiver, check that the
operating voltage is identical with your local
power supply.
The operating voltage is indicated on the
nameplate on the back of the receiver.
• The unit is not disconnected from the AC
power source (mains) as long as it is
connected to the wall outlet, even if the unit
itself has been turned off.
• If you are not going to use the receiver for a
long time, be sure to disconnect the receiver
from the wall outlet. To disconnect the AC
power cord, grasp the plug itself; never pull
the cord.
x Sampling frequency
To convert analog audio to digital, analog data
should be quantified. This process is called
sampling, and the number of times per second
the analog data is quantified is called the
sampling frequency. A standard music CD
stores data quantified at 44,100 times per
second, which is expressed as a sampling
frequency of 44.1 kHz. Generally speaking, a
higher sampling frequency means better sound
quality.
• The AC power cord must be changed only at
a qualified service shop.
On heat buildup
Although the receiver heats up during
operation, this is not a malfunction. If you
continuously use this receiver at a large
volume, the cabinet temperature of the top,
side and bottom rises considerably. To avoid
burning yourself, do not touch the cabinet.
continued
55GB
Download from Www.Somanuals.com. All Manuals Search And Download.
On placement
If color irregularity is observed
again...
• Place the receiver in a location with
adequate ventilation to prevent heat buildup
and prolong the life of the receiver.
• Do not place the receiver near heat sources,
or in a place subject to direct sunlight,
excessive dust, or mechanical shock.
• Do not place anything on top of the cabinet
that might block the ventilation holes and
cause malfunctions.
Place the speaker further away from the TV
set.
If howling occurs
Reposition the speakers or turn down the
volume on the receiver.
On cleaning
• Do not place the receiver near equipment
such as a TV, VCR, or tape deck. (If the
receiver is being used in combination with a
TV, VCR, or tape deck, and is placed too
close to that equipment, noise may result,
and picture quality may suffer. This is
especially likely when using an indoor
antenna. Therefore, we recommend using an
outdoor antenna.)
• Use caution when placing the receiver or
speakers on surfaces that have been
specially treated (with wax, oil, polish, etc.)
as staining or discoloration of the surface
may result.
Clean the cabinet, panel, and controls with a
soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder, or solvent,
such as alcohol or benzine.
If you have any questions or problems
concerning your receiver, please consult your
nearest Sony dealer.
On operation
Before connecting other components, be sure
to turn off and unplug the receiver.
If you encounter color
irregularity on a nearby TV
screen
The front speakers, center speaker and the sub
woofer are magnetically shielded to allow
them to be installed near a TV set. However,
color irregularities may still be observed on
certain types of TV sets.
As the surround speakers are not magnetically
shielded, we recommend that you place the
surround speakers slightly further away from
the TV set (page 13).
If color irregularity is
observed...
Turn off the TV set, then turn it on again after
15 to 30 minutes.
56GB
Download from Www.Somanuals.com. All Manuals Search And Download.
There is no sound from one of the front
speakers.
Troubleshooting
If you experience any of the following
difficulties while using the receiver, use this
troubleshooting guide to help you remedy the
problem.
• Connect a pair of headphones to the
PHONES jack to verify that sound is
output from the headphones. If only one
channel is output from the headphones, the
component may not be connected to the
receiver correctly. Check that all the cords
are fully inserted into the jacks on both the
receiver and the component. If both
channels are output from the headphones,
the front speaker may not be connected to
the receiver correctly. Check the
Audio
There is no sound, no matter which
component is selected, or only a very
low-level sound is heard.
connection of the front speaker which is
not outputting any sound.
• Make sure you have connected to both the
L and R jacks of an analog component, and
not only to either the L or R jack. Use an
audio cord (not supplied).
• Check that the speakers and components
are connected correctly and securely.
• Check that both the receiver and all
components are turned on.
• Check that MASTER VOLUME is not set
to “VOL MIN”.
• Check that headphones are not connected.
• Press MUTING to cancel the muting
function.
• Check that you have selected the correct
component with the input buttons.
• The protective device on the receiver has
been activated. Turn off the receiver,
eliminate the short-circuit problem, and
turn on the power again.
There is no sound from analog 2
channel sources.
• Check that the INPUT MODE is not set to
“COAX IN” or “OPT IN” for the selected
input (page 51).
There is no sound from digital sources
(from COAXIAL or OPTICAL input
jack).
• Check that the INPUT MODE is not set to
“ANALOG” (page 51).
There is no sound from a specific
component.
• Check that the component is connected
correctly to the audio input jacks for that
component.
• Check that the cord(s) used for the
connection is (are) fully inserted into the
jacks on both the receiver and the
component.
The left and right sounds are
unbalanced or reversed.
• Check that the speakers and components
are connected correctly and securely.
• Adjust the balance parameters using the
LEVEL menu.
• Check that you have selected the correct
component on the receiver.
continued
57GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Video
There is severe hum or noise.
• Check that the speakers and components
are connected securely.
• Check that the connecting cords are away
from a transformer or motor, and at least
3 m away from a TV set or fluorescent
light.
• Move your audio components away from
the TV.
• The plugs and jacks are dirty. Wipe them
with a cloth slightly moistened with
alcohol.
There is no picture or an unclear
picture appears on the TV screen or
monitor.
• Select the appropriate input using the input
buttons.
• Set your TV to the appropriate input mode.
• Move your audio components away from
the TV.
Tuner
There is no sound, or only a very low-
level sound is heard from the center/
surround speakers.
The FM reception is poor.
• Use a 75-ohm coaxial cable (not supplied)
to connect the receiver to an outdoor FM
antenna as shown below. If you connect
the receiver to an outdoor antenna, ground
it against lightning. To prevent a gas
explosion, do not connect the ground wire
to a gas pipe.
• Select a CINEMA STUDIO EX mode
There is no sound from the sub woofer.
• Check that the sub woofer is connected
correctly and securely.
• Make sure you have turned on your sub
woofer.
Outdoor FM antenna
Receiver
ANTENNA
The surround effect cannot be
obtained.
• Make sure the sound field function is on
(press MOVIE or MUSIC).
• Sound fields do not function for signals
with a sampling frequency of more than
48 kHz.
AM
Ground wire
(not supplied)
To ground
Dolby Digital or DTS multi channel
sound is not reproduced.
• Check that the DVD, etc. you are playing
is recorded in Dolby Digital or DTS
format.
• When connecting the DVD player, etc. to
the digital input jacks of this receiver,
check the audio setting (settings for the
audio output) of the connected component.
58GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Error messages
Radio stations cannot be tuned in.
• Check that the antennas are connected
securely. Adjust the antennas and connect
an external antenna, if necessary.
• The signal strength of the stations is too
weak (when tuning in with automatic
tuning). Use direct tuning.
• Make sure you set the tuning interval
correctly (when tuning in AM stations
with direct tuning).
• No stations have been preset or the preset
stations have been cleared (when tuning
by scanning preset stations). Preset the
stations (page 47).
• Press DISPLAY repeatedly on the
receiver so that the frequency appears on
the display.
If there is a malfunction, the display shows a
message. You can check the condition of the
system by the message. Refer to the following
table to solve the problem. If any problem
persists, consult your nearest Sony dealer. If
an error message appears while you perform
Auto Calibration, see “Error and warning
codes” (page 27) to solve the problem.
DEC. EROR
Appears when a signal the receiver cannot
decode (ex. DTS-CD) is input and “DEC.
PRI.” on the AUDIO menu is set to “DEC.
PROTECT
Irregular current is output from the
speakers. The receiver will automatically
turn off after a few seconds. Check the
speaker connection and turn on the power
again.
RDS does not work.
• Make sure that you are tuned to an FM
RDS station.
• Select a stronger FM station.
The RDS information that you want
does not appear.
• Contact the radio station and find out
whether they actually provide the service
in question. If so, the service may be
temporarily out of order.
If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver’s memory may remedy
memorized settings will be reset to their
factory settings and you will have to readjust
all settings on the receiver.
Remote commander
The remote does not function.
• Point the remote at the remote sensor on
the receiver.
• Remove any obstacles in the path between
the remote and the receiver.
If the problem persist
Consult your nearest Sony dealer. Note that if
service personnel changes some parts during
repair, these parts may be retained.
• Replace all the batteries in the remote with
new ones, if they are weak.
• Make sure you select the correct input on
the remote.
Reference sections for clearing
the receiver’s memory
To clear
See
All memorized settings
Customized sound fields
59GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Video section
Inputs/Outputs
Video:
Specifications
1 Vp-p, 75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
Amplifier section
1)
Power Output
P
P
B/CB: 0.7 Vp-p, 75 ohms
R/CR: 0.7 Vp-p, 75 ohms
Stereo mode (rated) (6 ohms, 1 kHz, THD 1%)
85 W + 85 W
80 MHz HD Pass Through
2)
Surround mode (reference) (6 ohms, 1 kHz,
THD 10%)
General
RMS output
Power requirements 230 V AC, 50/60 Hz
Power consumption 190 W
Power consumption (during standby mode)
0.3 W
FRONT:122 W
per channel
CENTER:122 W
SURROUND:122 W
per channel
Dimensions (width/height/depth) (Approx.)
430 × 145 × 300 mm
including projecting parts
and controls
1)
Measured under the following conditions:
230 V AC, 50 Hz
Reference power output for front, center and
2)
Mass (Approx.)
7.5 kg
surround speakers. Depending on the sound field
settings and the source, there may be no sound
output.
Speaker section
• Front speakers (SS-MSP680)
• Center speaker (SS-CNP680)
• Surround speakers (SS-SRP680)
Front/center speakers
Inputs
Analog
Sensitivity: 800 mV/
50 kohms
Full range, magnetically
shielded
Digital (Coaxial) Impedance: 75 ohms
Outputs (Analog)
Surround speakers Full range
Speaker units
70 mm cone type
Closed type
6 ohms
SUB WOOFER Voltage: 2 V/1 kohm
Tone
Enclosure type
Rated Impedance
Gain levels
Reproduction frequency range:
28 – 20,000 Hz
6 dB, 1 dB step
Dimensions (width/height/depth) (Approx.)
Front/surround speakers
91 × 96 × 102 mm
Center speaker
Mass (Approx.)
Front speaker
155 × 96 × 101 mm
FM tuner section
Tuning range
87.5 – 108.0 MHz
FM wire antenna
0.6 kg
0.7 kg
Antenna
Center speaker
Antenna terminals 75 ohms, unbalanced
Surround speaker 0.5 kg
Intermediate Frequency
10.7 MHz
AM tuner section
Tuning range
With 9-kHz tuning scale:
531 – 1,602 kHz
Antenna
Intermediate Frequency
450 kHz
Loop antenna
60GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• Sub woofer (SA-WP780)
Speaker system
Active subwoofer,
magnetically shielded
200 mm cone type
Acoustically loaded bass
reflex
Speaker unit
Enclosure type
RMS output
Input
190 W
LINE IN (input pin jack)
Power requirements 230 V AC, 50/60 Hz
Power consumption 80 W
Dimensions (width/height/depth) (Approx.)
270 × 331 × 380mm
including front panel
Mass (Approx.)
8.3 kg
Supplied speakers
Front speakers (2)
Center speaker (1)
Surround speakers (2)
Sub woofer (1)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Speaker cords, long (2)
Speaker cords, short (3)
Coaxial digital cord (1)
Monaural audio cord (1)
Foot pads (speakers) (20)
Foot pads (sub woofer) (4)
Remote commander RM-AAU006 (1)
R6 (size-AA) batteries (2)
Optimizer microphone (ECM-AC2 or
ECM-AC2a) (1)
Design and specifications are subject to
change without notice.
61GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
(1)
Sony Corporation Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|