Sony Camcorder 4 170 893 121 User Manual

4-170-893-12(1)  
Table of contents  
Getting started  
Recording/Playback  
Making good use of your 40  
camcorder  
Saving images with an  
external device  
HDR-CX110E/CX115E/CX116E/  
CX150E/CX155E/XR150E/XR155E  
Customizing your  
camcorder  
Additional information  
Quick reference  
Digital HD Video Camera Recorder  
“HandycamHandbook  
2010 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
recorded without any problems.  
Save all your recorded image data  
Compensation for the contents of recordings  
cannot be provided, even if recording or  
playback is not possible due to a malfunction of  
the camcorder, recording media, etc.  
TV color systems differ depending on the  
country/region. To view your recordings on a  
TV, you need a PAL system-based TV.  
Television programs, films, video tapes,  
and other materials may be copyrighted.  
Unauthorized recording of such materials may  
be contrary to the copyright laws.  
To prevent your image data from being lost,  
save all your recorded images on external media  
periodically. It is recommended that you save  
the image data on a disc such as DVD-R, etc.  
using your computer. Also, you can save your  
image data using a VCR, or a DVD/HDD  
recorder (p. 51).  
You cannot make a AVCHD disc from the  
image data recorded with  
(MENU)   
[Show others] [ REC MODE] (under  
[SHOOTING SET] category) set to [HD  
FX]. Save them on a Blu-ray Disc or using an  
external media (p. 49).  
Notes on playing back  
The camcorder is compatible with MPEG-4  
AVC/H.264 High Profile for high definition  
image quality (HD) recording. Therefore, you  
cannot play back images recorded with high  
definition image quality (HD) on the camcorder  
with the following devices;  
Other AVCHD format compatible devices  
which are not compatible with High Profile  
Devices which are not compatible with the  
AVCHD format  
You may not be able to play back normally  
images recorded on your camcorder with other  
devices. Also, you may not be able to play back  
images recorded on other devices with your  
camcorder.  
Notes on battery pack/AC Adaptor  
Be sure to remove the battery pack or the AC  
Adaptor after turning off the camcorder.  
Disconnect the AC Adaptor from the  
camcorder, holding both the camcorder and the  
DC plug.  
Note on the camcorder/battery pack  
temperature  
When the temperature of the camcorder  
or battery pack becomes extremely high or  
extremely low, you may not be able to record  
or play back on the camcorder, due to the  
protection features of the camcorder being  
activated in such situations. In this case, an  
indicator appears on the LCD screen (p. 86).  
Discs recorded with HD image quality  
(high definition)  
This camcorder captures high definition footage  
in the AVCHD format. DVD media containing  
AVCHD footage should not be used with DVD  
based players or recorders, as the DVD player/  
recorder may fail to eject the media and may  
erase its contents without warning. DVD media  
containing AVCHD footage may be played on  
a compatible Blu-ray Discplayer/recorder or  
other compatible device.  
When the camcoder is connected to a  
computer or accessories  
Do not try to format the recording media of the  
camcorder using a computer. If you do so, your  
camcorder may not operate correctly.  
When connecting the camcorder to another  
device with communication cables, be sure to  
insert the connector plug in the correct way.  
Pushing the plug forcibly into the terminal  
will damage the terminal and may result in a  
malfunction of the camcorder.  
GB  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
AVCHD disc.  
If you cannot record/play back images,  
perform [MEDIA FORMAT]  
Design and specifications of your camcorder  
and accessories are subject to change without  
notice.  
If you repeat recording/deleting images for  
a long time, fragmentation of data occurs on  
the recording media. Images cannot be saved  
or recorded. In such a case, save your images  
on some type of external media first, and then  
perform [MEDIA FORMAT] by touching  
(MENU) [Show others]   
[MEDIA FORMAT] (under [MANAGE  
MEDIA] category) the desired medium  
(HDR-CX116E/CX150E/CX155E/XR150E/  
Confirm the model name of your  
camcorder  
The model name is shown in this manual when  
there is a difference in specification between  
models. Confirm the model name on the  
bottom of your camcorder.  
The main differences in specification of this  
series are as follows.  
XR155E) [YES] [YES]   
.
Recording  
media  
Capacity  
of internal  
recording  
media  
USB  
jack  
Carl Zeiss lens  
Your camcorder is equipped with a Carl Zeiss  
lens, which was developed jointly by Carl  
Zeiss, in Germany, and Sony Corporation, and  
produces superior images. It adopts the MTF  
measurement system for video cameras and  
offers a quality typical of a Carl Zeiss lens.  
MTF= Modulation Transfer Function. The  
number value indicates the amount of light  
from a subject coming into the lens.  
HDR-  
Memory  
card  
Input/  
output  
CX110E  
HDR-  
Output  
only  
CX115E  
HDR-  
Internal  
memory +  
memory  
card  
8GB  
Output  
only  
CX116E  
HDR-  
16GB  
Input/  
output  
CX150E  
Notes on optional accessories  
HDR-  
Output  
only  
CX155E  
We recommend using genuine Sony accessories.  
Genuine Sony accessories may not be available  
in some countries/regions.  
HDR-  
Internal  
hard disk  
+ memory  
card  
120GB  
Input/  
output  
XR150E  
HDR-  
Output  
only  
About this manual, illustrations and  
on-screen displays  
XR155E  
The example images used in this manual for  
illustration purposes are captured using a  
digital still camera, and therefore may appear  
different from images and screen indicators that  
actually appear on your camcorder. And, the  
illustrations of your camcorder and its screen  
indication are exaggerated or simplified for  
understandability.  
In this manual, the internal memory (HDR-  
CX116E/CX150E/CX155E) and the hard disk  
(HDR-XR150E/XR155E) of the camcorder and  
the memory card are called “recording media.”  
In this manual, the DVD disc recorded with  
high definition image quality (HD) is called  
Notes on use  
Do not do any of the following. Otherwise, the  
recording media may be damaged, recorded  
images may be impossible to play back or may  
be lost, or other malfunctions could occur.  
ejecting the memory card when the access  
lamp (p. 19) is lit or flashing  
removing the battery pack or AC Adaptor  
from the camcorder, or applying mechanical  
shock or vibration to the camcorder when the  
(Movie)/ (Photo) lamps (p. 21) or the  
access lamp (p. 19) are lit or flashing  
When using a shoulder belt (sold separately), do  
GB  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
not crash the camcorder against an object.  
Do not use your camcorder in very loud areas.  
On the drop sensor (HDR-XR150E/  
XR155E)  
To protect the internal hard disk from shock  
by dropping, the camcorder has a drop sensor  
function (p. 79). When a drop occurs, or  
under a non-gravity condition, the block noise  
made when this function is activated by the  
camcorder may also be recorded. If the drop  
sensor catches a drop repeatedly, recording/  
playback may be stopped.  
Note on using the camcorder at high  
altitudes (HDR-XR150E/XR155E)  
Do not turn on the camcorder in a low-pressure  
area, where the altitude is more than 5,000  
meters (16,000 feet). Doing so may damage the  
internal hard disk drive of your camcorder.  
GB  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation flow  
Getting started (p. 12)  
Prepare the power source and memory card.  
Recording movies and photos (p. 20)  
Recording movies p. 22  
Changing the recording mode (p. 26)  
Expected recording time (MEDIA INFO, p. 74)  
Shooting photos p. 24  
Playing movies and photos  
Playback on the camcorder p. 29  
Playing images on a TV p. 37  
Saving images  
Saving movies and photos with a computer  
Saving movies and photos in external media p. 49  
Saving images with a DVD writer/recorder p. 51  
Deleting movies and photos (p. 40)  
If you delete the image data that has been saved on your  
computer or a disc, you can record new images on the free  
media space again.  
GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Advice for successful recording  
To get good results in recording  
Stabilizing your camcorder  
When you hold the camcorder, keep your upper body upright,  
and hold your arms close to your body.  
The SteadyShot function is effective against camera-shake,  
however, it is essential that you not move the camcorder.  
Zooming smoothly  
Zoom in and out slowly and smoothly. And, use zooming  
sparingly. Excessive zooming will make movies that may make  
the viewer feel tired when viewing them.  
Evoking a feeling of spaciousness  
Use the panning technique. Stabilize yourself, move your  
camcorder horizontally as you turn your upper body slowly. Stay  
still at the end of panning for a while to make the scene look  
stable.  
Accentuating movies with narration  
Consider the sound to be recorded with your movies. Narrate  
the subject, or talk to the subject during shooting.  
Aim for a balanced volume of voices, since the recording person  
is closer to the microphone than the recorded person.  
Using accessories  
Make good use of camcorder accessories.  
For example, using a tripod, you can make a time-lapse  
recording or record subjects in dim light, such as scenes of  
fireworks, or night views. By always carrying spare batteries, you  
can continue recording without worrying about battery power  
shortages.  
GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Useful recording techniques  
Capturing images beautifully without  
troublesome setting  
Focusing on the child on the left side of  
the screen  
Prioritizing the subject(27)  
SPOT FOCUS(65)  
INTELLIGENT AUTO(25)  
Capturing photos during movie  
recording  
Recording in a dimly-lit room  
Dual Rec(28)  
Smile Shutter (28)  
Capturing fireworks, or a sunset in all  
its splendor  
Checking your golf swing  
SUNRISE&SUNSET(63)  
GB  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
GB  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
1G0B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Step 1: Charging the battery pack  
HDR-CX110E/CX115E/CX116E/CX150E/CX155E  
DC IN jack  
DC plug  
Battery pack  
AC Adaptor  
Power cord (Mains lead)  
CHG (charge) lamp  
To the wall outlet (wall  
socket)  
HDR-XR150E/XR155E  
DC IN jack  
DC plug  
Battery pack  
Power cord (Mains lead)  
AC Adaptor  
CHG (charge) lamp  
To the wall outlet (wall  
socket)  
1G2B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
You can charge the “InfoLITHIUM” battery pack (V series) after attaching it to your  
camcorder.  
Notes  
You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder.  
Turn off your camcorder by closing the LCD screen.  
1
Attach the battery pack by sliding it in the direction of the arrow until it  
clicks.  
2
Connect the AC Adaptor and the power cord (mains lead) to your  
camcorder and the wall outlet (wall socket).  
Align the mark on the DC plug with that on the DC IN jack.  
3
The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off  
when the battery pack is fully charged.  
When the battery is charged, disconnect the AC Adaptor from the DC IN  
jack of your camcorder.  
4
Tips  
See page 90 on recording and playing time.  
When your camcorder is on, you can check the approximate amount of remaining battery power with the  
remaining battery indicator at the upper left on the LCD screen.  
Charging time  
Approximate time (min.) required when you fully charge a fully discharged battery pack.  
Battery pack  
NP-FV50(supplied)  
NP-FV70  
Charging time  
155  
195  
390  
NP-FV100  
Times measured with the camcorder at 25 C (77 °F).  
10 C to 30 C (50 °F to 86 °F) is recommended.  
GB  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To remove the battery pack  
Close the LCD screen. Slide the BATT (battery) release lever () and remove the battery  
pack ().  
To use a wall outlet (wall socket) as a power source  
Make the same connections as “Step 1: Charging the battery pack.” Even if the battery pack is  
attached, the battery pack is not discharged.  
Charging the battery pack abroad  
You can charge the battery pack in any countries/regions using the AC Adaptor supplied with  
your camcorder within the AC 100 V - 240 V, 50 Hz/60 Hz range.  
Notes  
Do not use an electronic voltage transformer.  
Notes on the battery pack  
When you remove the battery pack or disconnect the AC Adaptor, close the LCD screen and make sure  
that the  
(Movie)/ (Photo) lamps (p. 21), the access lamp (p. 19) are turned off.  
The CHG (charge) lamp flashes during charging under the following conditions:  
The battery pack is not attached correctly.  
The battery pack is damaged.  
The temperature of the battery pack is low.  
Remove the battery pack from your camcorder and put it in a warm place.  
The temperature of the battery pack is high.  
Remove the battery pack from your camcorder and put it in a cool place.  
We do not recommend using an NP-FV30, which only allows short recording and playback times, with  
your camcorder.  
In the default setting, the power turns off automatically if you leave your camcorder without any  
operation for about 5 minutes, to save battery power ([A.SHUT OFF], p. 78).  
Notes on the AC Adaptor  
Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from  
the wall outlet (wall socket) immediately if any malfunction occurs while using your camcorder.  
Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.  
Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This  
may cause a malfunction.  
1G4B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Step 2: Turning the power on, and setting the  
date and time  
Open the LCD screen of your camcorder.  
1
Your camcorder is turned on.  
To turn on your camcorder when the LCD screen is open, press POWER.  
MODE lamp  
POWER button  
Select the desired geographical area with  
/
, then touch [NEXT].  
2
Touch the button on the  
LCD screen  
To set the date and time again, touch  
(MENU) [Show others] [CLOCK/ LANG]  
(under  
/
[GENERAL SET] category) [CLOCK SET]. When an item is not on the screen, touch  
until the item appears.  
Set [SUMMERTIME], date and time, then touch  
.
3
The clock starts.  
If you set [SUMMERTIME] to [ON], the clock advances 1 hour.  
GB  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Notes  
The date and time does not appear during recording, but they are automatically recorded on the  
recording media, and can be displayed during playback. To display the date and time, touch  
(MENU) [Show others] [PLAYBACK SET] (under  
CODE] [DATE/TIME]   
You can turn off the operation beeps by touching  
SET] (under [GENERAL SET] category) [BEEP] [OFF]   
[PLAYBACK] category) [DATA  
.
(MENU) [Show others] [SOUND/DISP  
.
If the button you touch does not react correctly, calibrate the touch panel (p. 99).  
To turn off the power  
Close the LCD screen. The (Movie) lamp flashes for a few seconds and the power is turned  
off.  
Tips  
You can turn off your camcorder also by pressing POWER.  
When [POWER ON BY LCD] (p. 78) is set to [OFF], turn off your camcorder by pressing POWER.  
Changing the language setting  
You can change the on-screen displays to show messages in a specified language.  
Touch  
(MENU) [Show others] [CLOCK/ LANG] (under [GENERAL SET]  
category) [ LANGUAGE SET] a desired language   
.
1GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Step 3: Preparing the recording media  
The recording media that can be used differs depending on your camcorder. The following  
icons are displayed on the screen of your camcorder.  
HDR-CX110E/CX115E  
Memory  
card  
HDR-CX116E/CX150E/CX155E  
*
Internal  
Memory  
card  
memory  
HDR-XR150E/XR155E  
*
Internal hard  
disk  
Memory  
card  
* In the default setting, both movies and photos are recorded on this recording media. You can perform  
recording, playback and editing operations on the selected medium.  
Tips  
See page 90 for the recordable time of movies.  
See page 92 for the number of recordable photos.  
Selecting the recording media for movies (HDR-CX116E/CX150E/CX155E/  
XR150E/XR155E)  
Touch  
(MENU) [Show others] [MEDIA SETTINGS] (under  
[MANAGE MEDIA] category) [MOVIE MEDIA SET].  
The [MOVIE MEDIA SET] screen appears.  
Touch the desired recording media.  
Touch [YES]   
.
The recording medium is changed.  
GB  
1ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Selecting the recording media for photos (HDR-CX116E/CX150E/CX155E/  
XR150E/XR155E)  
Touch  
(MENU) [Show others] [MEDIA SETTINGS] (under  
[MANAGE MEDIA] category) [PHOTO MEDIA SET].  
The [PHOTO MEDIA SET] screen appears.  
Touch the desired recording media.  
Touch [YES]   
.
The recording medium is changed.  
To check the recording media settings  
In either movie recording mode or photo recording mode, the media icon of the selected  
recording media is displayed at the top right corner of the screen.  
Recording media icon  
The icon displayed may vary depending on your model.  
Inserting a memory card  
Notes  
Set the recording medium to [MEMORY CARD] to record movies and/or photos on a memory card  
(HDR-CX116E/CX150E/CX155E/XR150E/XR155E).  
Types of memory card you can use with your camcorder  
Only “Memory Stick PRO Duo” (Mark2) media, “Memory Stick PRO-HG Duo” media, SD memory  
cards (Class 4 or faster) and SDHC memory cards (Class 4 or faster) can be used with this camcorder. A  
MultiMediaCard cannot be used with this camcorder.  
In this manual, “Memory Stick PRO Duo” (Mark2) media and “Memory Stick PRO-HG Duo” media are  
called “Memory Stick PRO Duo” media.  
Memory cards of up to 32 GB have been verified to operate with your camcorder.  
1G8B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
“Memory Stick PRO Duo”media/“Memory Stick PRO-HG Duo”media  
(This size can be used with your camcorder.)  
“Memory Stick PRO Duo” media can be used only with “Memory Stick PRO” media compatible  
equipment.  
Do not attach a label or the like on “Memory Stick PRO Duo” media or “Memory Stick Duo” media  
adaptor.  
Open the cover, and insert the memory card with the nothched edge in the  
direction as illustrated until it clicks.  
Close the cover after inserting the memory card.  
Note direction of notched corner.  
Access lamp  
The [Create a new Image Database File.] screen may appear if you insert a new memory  
card. In that case, touch [YES]. If you record only photos on the memory card, touch  
[NO].  
Confirm the direction of the memory card. If you forcibly insert the memory card in the wrong  
direction, the memory card, memory card slot, or image data may be damaged.  
Notes  
If [Failed to create a new Image Database File. It may be possible that there is not enough free space.]  
is displayed, format the memory card by touching  
(MENU) [Show others] [MEDIA  
FORMAT] (under [MANAGE MEDIA] category) [MEMORY CARD] (HDR-CX116E/CX150E/  
CX155E/XR150E/XR155E) [YES] [YES]   
.
To eject the memory card  
Open the cover and lightly push the memory card in once.  
Do not open the cover during recording.  
When inserting or ejecting the memory card, be careful so that the memory card does not pop out and  
drop.  
GB  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Recording/Playback  
Recording  
In the default setting, movies are recorded with high definition image quality (HD) on the  
following media.  
HDR-CX110E/CX115E: Memory card  
HDR-CX116E/CX150E/CX155E: Internal memory  
HDR-XR150E/XR155E: Internal hard disk  
Tips  
To change the recording media, see page 17 (HDR-CX116E/CX150E/CX155E/XR150E/XR155E).  
To open the lens cover  
Slide the LENS COVER switch to open.  
Tips  
When you finish recording or when you play back images, close the lens cover.  
Fasten the grip belt.  
1
HDR-CX110E/CX115E/CX116E/CX150E/CX155E  
2G0B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
HDR-XR150E/XR155E  
Open the LCD screen of your camcorder.  
2
Your camcorder is turned on.  
To turn on your camcorder when the LCD screen is already open, press POWER (p. 15).  
You can switch recording modes by pressing MODE. Press MODE to light up the desired recording  
mode lamp.  
HDR-CX110E/CX115E/CX116E/CX150E/CX155E  
MODE button  
(Movie): When recording a movie  
(Photo): When recording a photo  
HDR-XR150E/XR155E  
MODE button  
(Movie): When recording a movie  
(Photo): When recording a photo  
GB  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Recording movies  
Press START/STOP to start recording.  
You can start recording also by touching in the bottom left of LCD screen.  
START/STOP button  
[STBY] [REC]  
To stop recording, press START/STOP again.  
You can stop recording also by touching in the bottom left of LCD screen.  
The icons and indicators on the LCD panel will be displayed for about 3 seconds, then disappear after  
turning on your camcorder or switching the recording (movie/photo)/playback modes. To display the  
icons and indicators again, touch anywhere on the screen except the rec & zoom buttons on the LCD.  
Rec & zoom buttons on LCD  
about 3sec  
after  
Notes  
If you close the LCD screen while recording movies, the camcorder stops recording.  
The maximum continuous recordable time of movies is about 13 hours.  
When a movie file exceeds 2 GB, the next movie file is created automatically.  
It will take several seconds until you can start recording after you turn on the camcorder. You cannot  
operate your camcorder during this time.  
2G2B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
The following states will be indicated if data is still being written onto the recording media after recording  
has finished. During this time, do not apply shock or vibration to the camcorder, or remove the battery or  
AC Adaptor.  
Access lamp (p. 19) is lit or flashing  
The media icon in the upper right of the LCD screen is flashing  
Tips  
See page 90 on the recordable time of movies.  
You can record photos during movie recording by pressing PHOTO fully (Dual Rec, p. 28).  
When a face is detected, a white frame appears and the image quality around the face is optimized  
automatically ([FACE DETECTION], p. 68).  
You can specify the priority face by touching it (p. 27).  
In the default setting, a photo is recorded automatically when the camcorder detects the smile of a person  
during movie recording (Smile Shutter, p. 28).  
You can capture photos from recorded movies (HDR-CX110E/CX116E/CX150E/CX155E/XR150E  
/XR155E)(p. 43).  
You can check the recordable time, estimated remaining capacity, etc., by touching  
[Show others] [MEDIA INFO] (under [MANAGE MEDIA] category).  
(MENU)   
The LCD screen of your camcorder can display recording images across the entire screen (full pixel  
display). However, this may cause slight trimming of the top, bottom, right and left edges of images when  
played back on a TV which is not compatible with full pixel display. In this case, set [GUIDEFRAME] to  
[ON] (p. 67), and record images using the outer frame displayed on the screen as a guide.  
To adjust the angle of the LCD panel, first open the LCD panel 90 degrees to the camcorder (), and  
then adjust the angle ().  
90 degrees (max.)  
90 degrees to the  
180 degrees (max.)  
camcorder  
[ STEADYSHOT] is set to [ACTIVE] in the default setting.  
Data code during recording  
The recording date, time and condition are recorded automatically on the recording media.  
They are not displayed during recording. However, you can check them as [DATA CODE]  
during playback. To display them, touch  
(MENU) [Show others] [PLAYBACK  
SET] (under  
[PLAYBACK] category) [DATA CODE] a desired setting   
.
GB  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting photos  
In the default setting, photos are recorded on the following recording media.  
HDR-CX110E/CX115E: Memory card  
HDR-CX116E/CX150E/CX155E: Internal memory  
HDR-XR150E/XR155E: Internal hard disk  
Tips  
To change the recording media, see page 17 (HDR-CX116E/CX150E/CX155E/XR150E/XR155E).  
Press MODE to turn on the (Photo) lamp.  
The LCD screen display switches for photo recording mode, and the screen aspect ratio  
becomes 4:3.  
Press PHOTO lightly to adjust the focus, then press it fully.  
You can record photos also by touching  
on the LCD screen.  
Flashes Lights up  
When  
disappears, the photo is recorded.  
Tips  
See page 92 on the recordable number of photos.  
To change the image size, touch (MENU) [Show others] [ IMAGE SIZE] (under  
[PHOTO SETTINGS] category) a desired setting   
You cannot record photos while is displayed.  
.
2G4B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Useful functions for  
recording movies and  
photos  
Tips  
You can set [ DIGITAL ZOOM] (p. 70) if you  
want to zoom to a greater level.  
Zooming  
Recording better images  
automatically (INTELLIGENT AUTO)  
You can magnify images up to 25 times the  
original size with the power zoom lever.  
You can magnify images also with the  
on the LCD screen.  
/
By pressing  
, you can record images  
using the INTELLIGENT AUTO function.  
When you turn the camcorder toward  
the subject, the camcorder records using  
the optimum combination of the three  
detection modes: Face detection, Scene  
detection and Camera-shake detection.  
When the camcorder detects the subject,  
the icons that correspond to the detected  
condition are displayed.  
Tips  
In the default setting, INTELLIGENT AUTO  
is set to ON.  
Wider range of view  
(Wide angle)  
Close view  
(Telephoto)  
Move the power zoom lever slightly for a  
slower zoom. Move it further for a faster  
zoom.  
Face detection  
(Portrait), (Baby)  
The camcorder detects faces, and adjusts  
the focus, color, and exposure.  
Notes  
SteadyShot may not reduce image blurring as  
desired when the power zoom lever is set to the  
T (Telephoto) side.  
Scene detection  
Be sure to keep your finger on the power zoom  
lever. If you move your finger off the power  
zoom lever, the operation sound of the power  
zoom lever may also be recorded.  
(Backlight),  
(Twilight), (Spotlight), (Low light),  
(Macro)  
The camcorder selects the most effective  
setting automatically, depending on the  
scene.  
(Landscape),  
You cannot change the zoom speed with the  
/
on the LCD screen.  
The minimum possible distance between  
camcorder and subject while maintaining sharp  
focus is about 1 cm (about 13/32 in.) for wide  
angle and about 80 cm (about 31 1/2 in.) for  
telephoto.  
Camera-shake detection  
(Tripod)  
The camcorder detects that camera-shake  
GB  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
does not occur, and makes the optimum  
setting for tripod.  
quality (STD) that has more compatibility  
with various playback devices. Change the  
image quality according to the recording  
situation or the playback device.  
Notes  
The camcorder may not detect the expected  
scene or subject, depending on the recording  
conditions.  
Touch  
others] [  
(MENU) [Show  
SET] (under  
/
To cancel INTELLIGENT AUTO  
[SHOOTING SET] category).  
Press  
.
or the detection mode icons disappear,  
and you can record with the preferred  
settings.  
Also, the INTELLIGENT AUTO setting  
is canceled if you change the following  
settings:  
[SMTH SLW REC]  
[SCENE SELECTION]  
[WHITE BAL.]  
Touch [  
HD QUALITY] to  
record high definition image  
quality (HD) images, or touch  
[
STD QUALITY] to record  
standard definition image quality  
(STD) images.  
[SPOT MTR/FCS]  
[SPOT METER]  
[SPOT FOCUS]  
Touch [YES]   
.
Recording image quality is changed.  
[EXPOSURE]  
[FOCUS]  
[TELE MACRO]  
Tips  
You can record, play, or edit movies in the  
selected image quality only. To record, play, or  
edit movies in another image quality, change  
this setting.  
[ STEADYSHOT]  
[AUTO BACK LIGHT]  
[LOW LUX]  
[FACE DETECTION]  
[SMILE PRIORITY]  
Selecting the recording mode  
Notes  
You can select a recording mode to record  
the high definition image quality (HD)  
movies from 4 levels. The recording time  
of the media is changed depending on  
recording mode.  
Above settings are reset to the default settings  
when INTELLIGENT AUTO is set to ON.  
Selecting high definition image  
quality (HD) or standard image  
quality (STD)  
You can select the desired image quality  
from the high definition image quality  
(HD) that enables you to record fine  
images, or the standard definition image  
Long time  
recording  
High quality  
recording  
2GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
[HD LP] (AVC HD 5M (LP))  
The recording mode of the standard image  
quality (STD) is limited to the following value.  
“9M” is an average bit-rate.  
[STD HQ] (STD 9M (HQ))  
“M,” such as in “24M,” means “Mbps.”  
Touch  
(MENU) [Show  
others] [ REC MODE] (under  
[SHOOTING SET] category).  
Touch a desired setting.  
Prioritizing the subject  
If you want to record high quality  
images with the high definition image  
quality (HD), select the FX or FH  
mode. If you want to record longer  
movies, select the LP mode.  
When [FACE DETECTION] (p. 68) is set  
to [ON] (the default setting), and several  
faces are detected, touch the face you want  
to record as priority. Focus/color/exposure  
are adjusted automatically for the selected  
face. Since the face you touched has priority  
also with the Smile Shutter function, your  
camcorder records a photo automatically  
when it detects the smiling face.  
Touch  
.
Notes  
You cannot create an AVCHD disc from a  
movie recorded with [HD FX] mode of  
[
REC MODE]. Save a movie recorded with  
[HD FX] mode onto Blu-ray discs or external  
storage devices (p. 49).  
Touch the face you want to record as  
priority.  
Tips  
Movies are recorded with AVCHD 1920   
1080/50i format when the FX or FH mode  
of the high definition image quality (HD) is  
selected. And when the HQ or LP mode of the  
high definition image quality (HD) is selected,  
movies are recorded with AVCHD 1440   
1080/50i format. Movies are recorded with  
MPEG-2 format when the standard image  
quality (STD) is selected.  
You can select the following high definition  
image quality (HD) recording mode. “24M”  
of [HD FX] is the maximum bit-rate, and the  
value other than of [HD FX], such as “17M,” is  
an average bit-rate.  
The double-lined frame is displayed.  
Touch the face with the double-lined frame  
again to cancel.  
Notes  
[HD FX] (AVC HD 24M (FX))  
[HD FH] (AVC HD 17M (FH))  
[HD HQ] (AVC HD 9M (HQ)) (the default  
setting)  
The face you touched may not be detected,  
depending on the surrounding brightness or  
hairstyle of the subject. In this case, touch the  
face again when you record.  
GB  
2ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Tips  
Recording high quality photos  
during movie recording (Dual Rec)  
The double-lined frame around a face targeted  
for possible smile detection shot turns orange.  
If the face you touched disappears from the  
LCD screen, the subject selected in [PRIORITY  
SETTING] (p. 69) has priority. If the face you  
touched returns to the screen, the face has  
priority.  
You can record photos during movie  
recording by pressing PHOTO.  
Notes  
may appear when the capacity of the  
recording media is not enough or when you  
record photos continuously. You cannot record  
Capturing smiles automatically  
(Smile Shutter)  
photos while  
is displayed.  
When [ REC MODE] is set to [HD FX], you  
cannot use Dual Rec.  
In the default setting, a photo is recorded  
automatically when the camcorder detects  
the smile of a person during movie  
recording. An orange frame appears around  
a face targeted for possible smile detection  
shot.  
Tips  
When the MODE lamp is set to  
(Movie), the  
size of photos becomes [  
or [2.1M] (4:3).  
2.7M] (16:9 wide)  
You can record photos during recording  
standby in the same way as when the (Photo)  
lamp is turned on.  
Recording in mirror mode  
Notes  
Smiles may not be detected depending on  
recording conditions, subject conditions, and  
the setting of your camcorder.  
When [ REC MODE] is set to [HD FX], you  
cannot use the Smile Shutter function.  
Open the LCD panel 90 degrees to the  
camcorder (), then rotate it 180 degrees  
to the lens side ().  
Tips  
You can select the subject that has priority  
for face detection and smile detection with  
[PRIORITY SETTING] (p. 69). When you  
specify the priority subject by touching the  
detection frame on the LCD screen, the face  
with a double-lined frame has priority.  
If a smile is not detected, set the [SMILE  
SENSITIVITY] (p. 69).  
Tips  
A mirror-image of the subject appears on the  
LCD screen, but the image will be normal when  
recorded.  
2G8B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Playback  
on the camcorder  
In the default setting, movies and photos that are recorded on the following recording media  
are played.  
HDR-CX110E/CX115E: Memory card  
HDR-CX116E/CX150E/CX155E: Internal memory  
HDR-XR150E/XR155E: Internal hard disk  
Tips  
To change the recording media, see page 17 (HDR-CX116E/CX150E/CX155E/XR150E/XR155E).  
Open the LCD screen of your camcorder.  
1
Your camcorder is turned on.  
To turn on your camcorder when the LCD screen is already open, press POWER (p.15).  
Press  
(VIEW IMAGES).  
2
The VISUAL INDEX screen appears after some seconds.  
You can display the VISUAL INDEX screen also by touching  
screen.  
(VIEW IMAGES) on the LCD  
Touch  
or  
() a desired movie () to playback a movie.  
3
Touch the (Photo) () a desired photo () to view a photo.  
Movies are displayed and sorted by recording date.  
Switches operating button display.  
To MENU screen  
GB  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Displays the screen to select the index type ([DATE INDEX]/[ FILM ROLL]/  
FACE]) (p. 32, 32, 33).  
[
/
/
: Displays movies recorded on the previous/next date.*  
: Displays the previous/next movie.  
Returns to the recording screen.  
* is displayed when is touched.  
appears when the standard definition image quality (STD) movie is selected with [  
SET] (p. 26).  
/
You can scroll the display by touching and dragging or .  
appears with the movie or photo that was most recently played or recorded. If you touch the  
movie or photo with , you can continue playback from the previous time. (appears on the  
photo recorded on the memory card.)  
Playing movies  
Your camcorder starts playing the selected movie.  
Volume adjustment  
Previous  
Next  
OPTION  
To stop  
To fast-forward  
To pause/play  
To fast-reverse  
Notes  
You may not be able to play back the images with other devices than camcorder.  
Tips  
When playback from the selected movie reaches the last movie, the screen returns to the INDEX screen.  
Touch during pause to play back movies slowly.  
As you repeat touching during playback, movies are played as fast as about 5 times   
/
/
about 10 times about 30 times about 60 times.  
You can also display the VISUAL INDEX by touching  
(MENU) [Show others] [VISUAL  
INDEX] (under  
[PLAYBACK] category).  
The recording date, time, and shooting conditions are recorded automatically during recording. This  
information is not displayed during recording, but you can display it during playback by touching  
(MENU) [Show others] [PLAYBACK SET] (under  
CODE] a desired setting   
[PLAYBACK] category) [DATA  
.
3G0B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
To adjust the sound volume of movies  
While playing back movies, touch  
adjust with  
/
.
You can also adjust the sound volume by using  
/
in the OPTION MENU.  
Viewing photos  
Your camcorder displays the selected photo.  
To start/stop slide  
show  
Previous  
Next  
OPTION MENU  
To the VISUAL INDEX  
screen  
Tips  
When viewing photos recorded on the memory card,  
(playback folder) appears on the screen.  
GB  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Useful functions for  
playing movies and  
photos  
Tips  
You can also display Date Index by touching  
(MENU) [Show others] [VIEW  
IMAGES] (under  
[DATE INDEX].  
On the Film Roll Index/Face Index screen, you  
can display the Date Index by touching the date  
in the upper right corner of the screen.  
[PLAYBACK] category)  
Searching for desired images by  
date (Date Index)  
You can search for desired images by date  
efficiently.  
Notes  
Searching for desired scene by  
pinpoint (Film Roll Index)  
You cannot use the Date Index function for  
photos on the memory card.  
Movies can be divided by a set time and the  
first scene of each division is displayed on  
the INDEX screen. You can start playing  
back a movie from the selected thumbnail.  
Press  
(VIEW IMAGES).  
The VISUAL INDEX screen appears.  
Touch  
[DATE INDEX].  
Press  
(VIEW IMAGES).  
Returns to the VISUAL INDEX screen  
The VISUAL INDEX screen appears.  
Touch  
[ FILM ROLL].  
Returns to the VISUAL INDEX screen  
Touch  
/
to select the date  
of the desired image, then touch  
.
Sets the interval at which to create  
thumbnails of scenes in a movie.  
Touch  
desired movie.  
/
to select the  
The images of the selected date are  
displayed on the VISUAL INDEX  
screen.  
Touch  
/
to search for the  
desired scene, then touch the  
scene you want to play back.  
Playback starts from the selected  
scene.  
3G2B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Tips  
Notes  
You can also display the Film Roll Index by  
Faces may not be detected depending on  
recording conditions.  
Example: People wearing glasses or hats, or who  
do not face towards the camera.  
touching  
[VIEW IMAGES] (under  
(MENU) [Show others]   
[PLAYBACK]  
category) [ FILM ROLL].  
Make sure that you set [FACE DETECTION]  
to [ON] (p. 68) (the default setting) prior to  
recording, to search movies on the Face Index.  
Searching for desired scene by face  
(Face Index)  
Tips  
The face images detected or touched during  
movie recording are displayed on the  
INDEX screen.  
You can play back the movie from the  
selected face image.  
You can also display the Face Index by touching  
(MENU) [Show others] [VIEW  
IMAGES] (under  
[PLAYBACK] category)  
[ FACE].  
Playing back a digest of your  
movies (Highlight Playback)  
Press  
(VIEW IMAGES).  
Your camcorder selects Highlight Playback  
scenes at random, puts them together, and  
plays them back as a digest of your high  
definition image quality (HD) movies  
with music and visual effects. Scenes  
The VISUAL INDEX screen appears.  
Touch  
[ FACE].  
Returns to the VISUAL INDEX screen  
for Highlight Playback differ each time  
Highlight Playback is selected. You can save  
the desired Highlight Playback scenario.  
Touch  
(MENU) [Show  
others] [ HIGHLIGHT] (under  
[PLAYBACK] category).  
Touch  
desired movie.  
/
to select the  
The settings for Highlight Playback appear.  
The Highlight Playback starts after several  
seconds.  
Touch  
/
to search for the  
Returns to the VISUAL INDEX screen  
desired face image, then touch  
the desired face image to view  
the scene.  
Playback starts from the beginning of  
the scene with the selected face image.  
GB  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Tips  
To stop Highlight Playback  
You can change the settings for Highlight  
Playback during Highlight Playback by  
To pause, touch  
To stop, touch  
.
or  
.
touching  
(OPTION).  
If you change the settings for Highlight  
Playback, Highlight Playback scenes are  
re-selected.  
If you change [MUSIC] after you select  
[THEME], the music will be selected  
automatically for the theme from next time.  
To change the settings for Highlight  
Playback  
After touching [ HIGHLIGHT], touch  
[HIGHLIGHT SET] before the Highlight  
Playback starts. You can set following items.  
[PLAYBACK RANGE]  
To save a scenario for Highlight  
Playback  
Set the range of movies to be played by selecting  
the from and to date, then touch  
.
If no range is set, your camcorder plays the  
movies starting from those of the date displayed  
on the VISUAL INDEX screen until the most  
recently recorded movie.  
Touch  
(OPTION) [ SCENARIO  
SAVE] [YES] during Highlight  
Playback.  
[THEME]  
Select one of the following: [SIMPLE],  
[NOSTALGIC], [STYLISH], [ACTIVE] (the  
default setting)  
The music category is selected automatically  
according to the theme.  
[MUSIC]  
You can save a maximum of 8 scenarios.  
If 8 scenarios have already been saved,  
[HIGHLIGHT SCENARIO full. HIGHLIGHT  
SCENARIOS may be erased when the  
SCENARIO ERASE button is pressed.]  
appears on the LCD screen. Touch  
From the music category, you can add one or  
more of the following: [MUSIC1] - [MUSIC4]  
(the default setting), [MUSIC5] - [MUSIC8]  
(the desired music* for HDR-CX110E/CX150E/  
XR150E).  
* To change music files, for details, see page 35.  
[AUDIO MIX]  
The original sound is played back with the  
music.  
Touch  
the original sound and the music.  
[SHUFFLE]  
To play back movies in random order, select  
[ON].  
[
SCENARIO ERASE] to delete unwanted  
scenarios.  
To play back a saved Highlight Playback  
scenario  
/
to adjust the balance between  
Touch  
(MENU) [Show others]   
[
SCENARIO] (under  
[PLAYBACK]  
category) and select a scenario you want to  
play back with  
/
and touch  
.
Notes  
Notes  
The [PLAYBACK RANGE] setting is cleared  
when the Highlight Playback stops.  
If movies included in the Highlight Playback  
scenario you are going to play are deleted or  
divided, the scenario is played back with those  
movies skipped.  
3G4B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
To erase the saved Highlight Playback  
scenario  
Using PB zoom with photos  
You can magnify photos from about 1.1 to 5  
times the original size.  
Magnification can be adjusted with the  
power zoom lever.  
Touch  
(MENU) [Show others]   
[
SCENARIO ERASE] (under  
[EDIT]  
category) [ERASE] and select a scenario  
you want to erase with  
/
, then touch  
[YES]   
.
To erase all scenarios, touch  
(MENU)  
[Show others] [ SCENARIO ERASE]  
(under [EDIT] category) [ERASE ALL]  
[YES] [YES]   
.
You can erase also by touching  
(OPTION) during Highlight Scenario Playback  
or on the scenario selection screen.  
Play back the photo you want to  
magnify.  
To change music files (HDR-CX110E/  
CX150E/XR150E)  
You can transfer music files from audio CDs  
or MP3 files to your camcorder, and play them  
with Highlight Playback. To transfer music files,  
you need to install the supplied software “PMB”  
on your computer. Turn on your camcorder and  
computer, connect them with the supplied USB  
cable, then touch [DOWNLOAD MUSIC] on  
the camcorder screen. (If the [USB SELECT]  
Magnify the photo with T  
(Telephoto).  
The screen is framed.  
Touch the screen at the point you  
want to display in the center of  
the displayed frame.  
screen does not appear, touch  
(MENU)  
[Show others] [MUSIC TOOL] (under  
[OTHERS] category) [DOWNLOAD  
MUSIC]).  
After the music file is transferred to the  
camcorder, if you cannot play the music,  
the music file may be damaged. Delete the  
The point where you touched on the  
screen is moved to the center of the  
display frame.  
music file by touching  
(MENU)   
[Show others] [MUSIC TOOL] (under  
[OTHERS] category) [EMPTY MUSIC],  
then transfer the music file again. If you delete  
music files using [EMPTY MUSIC], the music  
data recorded on your camcorder at the factory  
will be deleted too. In this case, you can restore  
them using Music Transfer, a software installed  
together with “PMB.To start Music Transfer,  
click [Start] [All Programs] [PMB]  
[PMB Launcher] [Export] [Music  
Transfer]. For operating instructions, see  
[Music Transfer] help.  
Adjust the magnification with W  
(Wide angle)/T (Telephoto).  
To cancel, touch  
.
GB  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Playing back a series of photos  
(Slide show)  
Touch  
on the photo playback  
screen.  
The slide show begins from the selected  
photo.  
To stop the slide show  
Touch  
.
To restart the slide show  
Touch  
again.  
Notes  
You cannot operate playback zoom during slide  
show.  
Tips  
You can set continuous slide show playback  
by selecting  
(OPTION)   
tab   
[SLIDE SHOW SET] while playing photos. The  
default setting is [ON] (continuous playback).  
3GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Playing images on a TV  
Connection methods and the image  
quality (high definition (HD) or standard  
definition (STD)) viewed on the TV screen  
differ depending on what type of TV is  
connected, and the connectors used.  
Touch  
/
to select the input  
jack of your TV, then touch  
.
The connection medhod is displayed.  
If you touch [HINT], you can see tips for  
the connection or change the settings of  
your camcorder.  
Connecting a TV using [TV  
CONNECT Guide]  
You can connect your camcorder to the TV  
easily following the instructions displayed  
on the LCD screen, [TV CONNECT  
Guide].  
Input connectors  
on the TV  
Connectors on your  
camcorder  
Switch the input on the TV to the  
connected jack.  
Refer to the instruction manuals of the TV.  
Connect your camcorder to the  
TV.  
HDMI OUT jack  
Turn on your camcorder, and  
touch  
(MENU) [Show  
others] [TV CONNECT Guide]  
(under [OTHERS] category) on  
the LCD screen.  
Use the supplied AC Adaptor as the power  
source (p. 14).  
*
Touch [High Definition TV].  
**  
A/V Remote  
Connector  
*
HDR-CX110E/CX115E/CX116E/CX150E/  
CX155E  
** HDR-XR150E/XR155E  
GB  
3ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
A/V connecting cable with S VIDEO (sold  
separately)  
Touch  
[YES].  
When the A/V connecting cable is used  
to output movies, movies are output with  
standard definition image quality (STD).  
(White)  
(Red)  
Play back movies and photos on  
your camcorder (p. 29).  
(Yellow)  
A/V connecting cable (supplied)  
(Yellow)  
(White)  
(Red)  
Types of connection cables between  
your camcorder and TV  
Connecting to a high definition TV  
Component A/V Cable (supplied)  
When connecting to your TV via a VCR  
Connect your camcorder to the LINE IN input  
on the VCR using the A/V connecting cable. Set  
the input selector on the VCR to LINE (VIDEO  
1, VIDEO 2, etc.).  
(Green) Y  
(Blue)PB/CB  
(Red)PR/CR  
(White)  
(Red)  
To set the aspect ratio according to the  
connected TV (16:9/4:3)  
HDMI Cable (sold separately)  
Set [TV TYPE] to [16:9] or [4:3] according to  
your TV (p. 77).  
When your TV is monaural (When your  
TV has only one audio input jack)  
Connect the yellow plug of the A/V connecting  
cable to the video input jack and connect the  
white (left channel) or red (right channel) plug  
to the audio input jack of your TV or VCR.  
Connecting to a non-high-definition 1ꢀ:9 (wide) or 4:3  
TV  
Component A/V Cable (supplied)  
When you connect with component  
A/V cable  
(Green) Y  
(Blue)PB/CB  
(Red)PR/CR  
If you connect only component video plugs,  
audio signals are not output. Connect the white  
and red plugs to output audio signals.  
(White)  
(Red)  
3G8B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
HDMI (High Definition Multimedia Interface)  
is an interface to send both video/audio signals.  
The HDMI OUT jack outputs high quality  
images and digital audio.  
When you connect with HDMI cable  
Use an HDMI cable with the HDMI logo.  
Use an HDMI mini connector on one end  
(for the camcorder), and a plug suitable for  
connecting your TV on the other end.  
Copyright-protected images are not output  
from the HDMI OUT jack of your camcorder.  
Some TVs may not function correctly (e.g., no  
sound or image) with this connection.  
Do not connect the camcorder HDMI OUT  
jack to an external device HDMI OUT jack, as  
malfunction may result.  
Using “BRAVIASync  
You can operate your camcorder with  
the remote commander of your TV by  
connecting your camcorder to a “BRAVIA”  
Sync compatible TV launched in 2008 or  
later with the HDMI cable.  
You can operate the menu of your  
When you connect with A/V  
connecting cable with S VIDEO  
camcorder by pressing the SYNC MENU  
button of the remote commander of your  
TV. You can display index screens such  
as VISUAL INDEX, play selected movies  
or display selected photos by pressing up/  
down/left/right/enter buttons of the remote  
commander of your TV.  
When the S VIDEO plug (S VIDEO channel)  
is connected, audio signals are not output. To  
output audio signals, connect the white and red  
plugs to the audio input jack of your TV.  
This connection produces higher resolution  
images compared with the A/V connecting  
cable.  
Notes  
Notes  
There may be some operations you cannot do  
with the remote commander.  
When you play back standard definition image  
quality (STD) movies on a 4:3 TV that is not  
compatible with the 16:9 signal, record movies  
To set your camcorder, touch  
[Show others] [OTHER SETTINGS]  
(under [GENERAL SET] category)   
[CTRL FOR HDMI] [ON] (the default  
setting)   
(MENU)  
with 4:3 aspect ratio. Touch  
[Show others] [OTHER REC SET]  
(MENU)  
(under  
[SHOOTING SET] category)   
.
[
WIDE SELECT] [4:3]   
Also set your TV. Refer to the instruction  
manual of the TV for details.  
The operation of “BRAVIASync differs  
according to each model of BRAVIA. Refer to  
the instruction manual of your TV for details.  
If your TV/VCR has a 21-pin adaptor  
(EUROCONNECTOR)  
Use a 21-pin adaptor (sold separately) to  
view playback pictures.  
Tips  
If you turn off the TV, your camcorder is turned  
off simultaneously.  
TV/VCR  
Tips  
If you connect your camcorder to the TV using  
more than one type of cable to output images,  
the order of priority of the TV input jacks is as  
follows:  
HDMI component S VIDEO video  
GB  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Making good use of your camcorder  
Deleting movies and  
photos  
You can free media space by deleting  
3
4
Touch and display the mark  
on the movies or photos to be  
deleted.  
movies and photos from recording media.  
Notes  
You cannot restore images once they are  
deleted. Save important movies and photos in  
advance.  
Do not remove the battery pack or the AC  
Adaptor from your camcorder while deleting  
the images. It may damage the recording media.  
Do not eject memory card while deleting  
images from the memory card.  
You cannot delete protected movies and photos.  
Undo the protection of the movies and photos  
to delete them, before you try to delete them  
If the deleted movie is included in the Playlist  
(p. 46), the movie added to the Playlist is  
deleted also from the Playlist.  
Press and hold the image down on the  
LCD screen to confirm the image. Touch  
to return to the previous screen.  
Touch  
[YES]   
.
If the deleted movie is included in the saved  
Highlight Playback scenario (p. 35), the movie  
is also deleted from the scenario.  
To delete all movies/photos at one time  
In step 2, touch [ DELETE]   
[
DELETE ALL]/[  
DELETE ALL]  
Tips  
[YES] [YES]   
.
You can delete an image on the playback screen  
To delete all photos at one time, touch  
DELETE] [ DELETE ALL] [YES]  
[YES]   
from  
OPTION MENU.  
[
To delete all images recorded in the recording  
media, and recover all the recordable space of  
the media, format the media (p. 74).  
.
To delete all the movies/photos  
Reduced-size images which enable you to view  
many images at the same time on an index  
screen are called “thumbnails.”  
recorded on the same day at one time  
Notes  
You cannot delete photos on memory card by  
recording date.  
In step 2, touch [ DELETE]   
1
2
Touch  
(MENU) [Show  
others] [DELETE] (under  
[EDIT] category).  
[
DELETE by date]/[  
DELETE  
by date].  
To delete all photos on the same day at one  
time, touch [ DELETE] [ DELETE  
by date].  
To delete movies, touch  
[
[
DELETE] [  
DELETE].  
DELETE] or  
To delete photos, touch [ DELETE]   
DELETE].  
[
4G0B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Protecting recorded  
movies and photos  
(Protect)  
Touch  
date of the desired movies/photos, then  
touch  
/
to select the recording  
Protect movies and photos to avoid deleting  
them by mistake.  
.
Touch the image on the LCD screen to  
Tips  
confirm the image. Touch  
to the previous screen.  
to return  
You can protect movies and photos on the  
playback screen from  
OPTION MENU.  
Touch [YES]   
.
1
Touch  
(MENU) [Show  
others] [PROTECT] (under  
[EDIT] category).  
2
3
To protect movies, touch  
[
[
PROTECT]   
PROTECT]/[  
PROTECT].  
To protect photos, touch [ PROTECT]  
[ PROTECT].  
Touch the movies and photos to  
be protected.  
is displayed on the selected images.  
Press and hold the image down on the  
LCD screen to confirm the image. Touch  
to return to the previous screen.  
4
Touch  
[YES]   
.
GB  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Dividing a movie  
To undo the protection of movies and  
photos  
Touch the movie or photo marked with   
in step 3.  
disappears.  
1
Touch  
(MENU) [Show  
others] [ DIVIDE] (under  
[EDIT] category).  
To protect all the movies and photos  
recorded on the same day at one time  
2
3
Touch the movie to be divided.  
The selected movie starts playback.  
Notes  
You cannot select [ PRT. by date] for still  
images recorded on the memory card.  
Touch  
at the point where  
you want to divide the movie into  
scenes.  
In step 2, touch [ PROTECT]   
[
PRT. by date]/[  
PRT. by date].  
The movie pauses. Play and pause  
To protect all photos on the same day at  
one time, touch [ PROTECT]   
toggles as you press  
.
[
PRT. by date].  
Adjusts the dividing point with more  
precision after you selected the dividing  
point with  
.
Touch  
date of the desired movies/photos, then  
touch  
/
to select the recording  
.
Touch the image on the LCD screen to  
Returns to the beginning of the selected  
movie  
confirm the image. Touch  
to the previous screen.  
to return  
Touch [PROTECT]   
.
4
Touch  
[YES]   
.
To undo the protection of movies and  
photos recorded on the same day at  
one time  
In step above, select the recording date  
Notes  
You cannot restore movies once they are  
divided.  
You cannot divide protected movie. Undo the  
protection of the movie to divide it, before you  
try to divide it (p. 41).  
of the desired movies/photos, then touch  
[UNPROTECT]   
.
Do not remove the battery pack or the AC  
Adaptor from your camcorder while dividing  
the movie. It may damage the recording media.  
Also, do not eject the memory card while  
4G2B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Capturing a photo  
from a movie (HDR-  
CX110E/CX116E/  
CX150E/CX155E/  
XR150E/XR155E)  
dividing movies on the memory card.  
A slight difference may occur from the point  
where you touch  
and the actual dividing  
point, as your camcorder selects the dividing  
point based on about half-second increments.  
If you divide the original movie, the movie  
added to the Playlist will also be divided.  
If the divided movie is included in the saved  
Highlight Playback scenario (p. 34), the movie  
is deleted from the scenario.  
Only simple editing is available on the  
camcorder. Use the supplied software “PMB”  
for more advanced editing.  
1
Touch  
others] [PHOTO CAPTURE]  
(under [EDIT] category).  
(MENU) [Show  
The [PHOTO CAPTURE] screen  
appears.  
Tips  
2
3
Touch the movie to be captured.  
You can divide a movie on the playback screen  
from  
OPTION MENU.  
The selected movie starts playback.  
Touch  
at the point where  
you want to capture.  
The movie pauses. Play and pause  
toggles as you press  
.
Adjust the capturing point with more  
precision after you selected the point with  
.
Returns to the beginning of the selected  
movie  
4
Touch  
.
When capturing is finished, the screen  
returns to pause.  
The captured photo is saved on the  
recording media selected in [PHOTO  
MEDIA SET] (HDR-CX116E/CX150E/  
CX155E/XR150E/XR155E) (p. 18).  
GB  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Dubbing/copying  
movies and photos  
from the internal  
recording media to  
memory card (HDR-  
CX116E/CX150E/  
CX155E/XR150E/  
XR155E)  
To continue capturing, touch  
repeat steps from step 3.  
To capture a photo from another movie,  
, then  
touch  
, then repeat steps from step 2.  
5
Touch  
.
Notes  
The image size is fixed depending on the image  
quality of the movie:  
Dubbing movies  
[  
(HD)  
[  
2.1M] with high definition image quality  
You can dub movies recorded on the  
internal recording media of your camcorder  
to memory card.  
Insert memory card into your camcorder  
before the operation.  
0.2M] in 16:9 (wide) with standard  
definition image quality (STD)  
[VGA(0.3M)] in 4:3 with standard definition  
image quality (STD)  
The recording medium where you want to save  
photos should have enough free space.  
The recording date and time of captured photos  
is the same as the recording date and time of  
the movies.  
If the movie you are capturing from has no data  
code, the recording date and time of the photo  
will be the date and time you captured from  
the movie.  
Notes  
When you record a movie on the memory card  
for the first time, create the image database file  
by touching  
(MENU) [Show others]  
[MANAGE  
[REPAIR IMG.DB F.] (under  
MEDIA] category) [MEMORY CARD].  
Connect your camcorder to the wall outlet  
(wall socket) using the supplied AC Adaptor to  
prevent your camcorder from running out of  
power during dubbing.  
You cannot capture a photo from a movie  
recorded on memory card (HDR-CX116E/  
CX155E/XR155E).  
Tips  
The original movie will not be deleted after  
dubbing.  
All included images in a Playlist will be dubbed.  
The images recorded by this camcorder and  
stored onto the recording media are called  
“original.”  
Touch  
(MENU) [Show  
others] [MOVIE DUB] (under  
[EDIT] category).  
The [MOVIE DUB] screen appears.  
4G4B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Touch  
[YES]   
Touch the type of dubbing.  
.
[DUB by select]: To select movies and  
dub  
[DUB by date]: To dub all movies of a  
specified date  
Tips  
To check the dubbed movies after dubbing is  
finished, select [MEMORY CARD] on [MOVIE  
MEDIA SET] and play them back (p. 17).  
[
DUB ALL]: To dub the high  
definition image quality (HD) Playlist  
DUB ALL]: To dub the standard  
[
definition image quality (STD) Playlist  
When you select the Playlist as the  
source of dubbing, follow the on-screen  
instructions to dub the Playlist.  
Copying photos  
You can copy photos from the internal  
recording media of the camcorder to  
memory card.  
Insert a memory card into your camcorder  
before the operation.  
Select the movie to be dubbed.  
[DUB by select]: Touch the movie to be  
dubbed, and mark it with . You can  
select multiple movies.  
Notes  
Connect your camcorder to the wall outlet  
(wall socket) using the supplied AC Adaptor to  
prevent your camcorder from running out of  
power during copying.  
Touch  
(MENU) [Show  
others] [PHOTO COPY] (under  
Remaining capacity of the  
memory card  
[EDIT] category).  
The [PHOTO COPY] screen appears.  
Press and hold the image down on the  
LCD screen to confirm the image. Touch  
to return to the previous screen.  
[DUB by date]: Select the recording  
date of the movie to be dubbed, then  
touch  
dates.  
. You cannot select multiple  
GB  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Using the Playlist of  
movies  
The Playlist is a list showing thumbnails of  
the movies that you have selected.  
The original movies are not changed even  
if you edit or erase the movies added to the  
Playlist.  
Touch the type of copying.  
[COPY by select]: To copy selected  
photos  
[COPY by date]: To copy all photos of  
a specified date  
Creating the Playlist  
Select the photo to be copied.  
Notes  
[COPY by select]: Touch the photo to  
be copied, and mark with . You can  
select multiple photos.  
High definition image quality (HD) movies and  
standard definition image quality (STD) movies  
are added to an individual Playlist.  
Touch  
(MENU) [Show  
others] [PLAYLIST EDIT]  
(under  
Touch [  
[EDIT] category).  
ADD] or [ ADD].  
Press and hold the image down on the  
screen to confirm the image. Touch  
to return to the previous screen.  
[COPY by date]: Select the recording  
date of the photo to be copied, then  
Touch the movie to be added to  
the Playlist.  
touch  
dates.  
. You cannot select multiple  
The selected movie is marked with  
Press and hold the image down on the  
LCD screen to confirm the image. Touch  
to return to the previous screen.  
.
Touch  
[YES]   
.
Touch  
[YES]   
.
Tips  
To check the copied photos after copying  
is finished, select [MEMORY CARD] on  
[PHOTO MEDIA SET] and play them back  
4GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
To add all the movies recorded on the  
same day at one time  
Playing the Playlist  
Touch (MENU) [Show  
In step 2, touch [  
ADD by date].  
ADD by date]/  
[
others] [PLAYLIST] (under  
[PLAYBACK] category).  
The recording dates of movies are  
displayed on the screen.  
Movies added to the Playlist appear.  
Touch  
/
to select the recording  
date of the desired movie, then touch  
.
Touch the movie you want to  
play back.  
Touch the image on the LCD screen to  
confirm the image. Touch  
to the previous screen.  
Touch [YES]   
to return  
The Playlist is played back from the  
selected movie to the end, then the  
screen returns to the Playlist screen.  
.
Notes  
Do not remove the battery pack or the AC  
Adaptor from your camcorder while adding  
movies to the Playlist. It may damage the  
recording media. Also, do not eject the memory  
card while editing movies on the memory card.  
You cannot add photos to the Playlist.  
You cannot create a Playlist which contains  
both high definition image quality (HD) movies  
and standard definition image quality (STD)  
movies.  
To erase unnecessary movies from the  
Playlist  
Touch  
[PLAYLIST EDIT] (under  
[EDIT] category).  
Touch [ ERASE]/[  
To erase all the movies from the Playlist,  
touch [ ERASE ALL]/[ ERASE  
(MENU) [Show others]  
ERASE].  
ALL] [YES] [YES]   
Tips  
.
You can add a maximum of 999 high definition  
image quality (HD) movies, or 99 standard  
definition image quality (STD) movies to the  
Playlist.  
Select the movie to be erased from the  
list.  
You can add a movie on the playback screen  
or the Playlist screen by touching  
(OPTION).  
The selected movie is marked with  
Press and hold the image down on the  
.
LCD screen to confirm the image. Touch  
to return to the previous screen.  
GB  
4ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Touch  
[YES]   
.
Tips  
Even if you erase a movie from a Playlist, the  
original movie is not deleted.  
To change the order within the Playlist  
Touch  
[PLAYLIST EDIT] (under  
[EDIT] category).  
Touch [ MOVE]/[  
(MENU) [Show others]  
MOVE].  
Select the movie to be moved.  
The selected movie is marked with  
Touch the image on the LCD screen to  
.
confirm the image. Touch  
to the previous screen.  
to return  
Touch  
Select the destination with  
.
/
.
Destination bar  
Touch  
[YES]   
.
Tips  
When you select multiple movies, the movies  
are moved following the order appearing in the  
Playlist.  
4G8B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Saving images with an external device  
Saving images in  
external media  
(DIRECT COPY)  
2
If the external media has the AC  
power cable, connect it to the  
wall outlet (wall socket).  
You can save movies and photos on external  
media (USB storage device), such as an  
external hard disk drive. You can also play  
back images on the camcorder or another  
playback device.  
3
4
Connect the USB Adaptor Cable  
to the external media.  
Notes  
For this operation, you need the USB Adaptor  
Cable VMC-UAM1 (sold separately).  
The USB Adaptor Cable VMC-UAM1 may not  
be available in some countries/regions.  
You cannot use the following devices as an  
external media.  
media with a capacity exceeding 2 TB  
ordinary disc drive such as CD or DVD drive  
media connected via USB hub  
Connect the USB Adaptor Cable  
to the (USB) jack of your  
camcorder.  
When the [Create a new Image  
Database File.] screen appears, touch  
[YES].  
media with built-in USB hub  
card reader  
You may not be able to use external media with  
a code function.  
FAT file system is available for your camcorder.  
If the external media was formatted to NTFS  
file system, etc., format the external media on  
your camcorder before use. The format screen  
appears when the external media is connected  
to your camcorder.  
USB Adaptor  
Cable (sold  
separately)  
Operation is not assured with every device  
satisfying requirements for operating.  
Connect your camcorder to the wall outlet (wall  
socket) using the supplied AC adaptor (p. 14).  
Refer to the instruction manual supplied with  
the external media.  
5
Touch [Copy.] on the camcorder  
screen.  
For details on available external media, go to the  
Sony support website in your country/region.  
HDR-CX110E/CX115E:  
Movies and photos that have not yet  
been saved on to external media can  
be saved.  
HDR-CX116E/CX150E/CX155E/  
XR150E/XR155E:  
Movies and photos in the internal  
recording media of the camcorder that  
have not yet been saved on to external  
media can be saved.  
1
Connect the AC Adaptor and the  
power cord (mains lead) to the  
DC IN jack of your camcorder and  
the wall outlet (wall socket).  
GB  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
This screen will appear only when there  
are newly recorded images.  
To save desired movies and photos  
Notes  
You cannot copy or search photos by date which  
are recorded on the memory card.  
Touch [Play without copying.] in step 5  
above.  
6
After the operation is completed,  
touch  
on the camcorder  
screen.  
The VISUAL INDEX screen of the  
external media is displayed.  
Touch  
(MENU) [Show others]  
Notes  
[MOVIE DUB] (when selecting  
movies)/[PHOTO COPY] (when  
selecting photos).  
Follow the on-screen instructions to  
select the recording media (HDR-  
CX116E/CX150E/CX155E/XR150E/  
XR155E) and image selection methods.  
When you selected [DUB by select],  
touch the image to be saved.  
The number of scenes you can save on the  
external media are as follows. However, even if  
the external media has free space, you cannot  
save scenes exceeding the following number.  
High definition image quality (HD) movies:  
Max. 3,999  
Standard definition image quality (STD)  
movies: 9,999  
Photos: 9,999 frames × 899 folders  
The number of scenes may be smaller  
depending on the type of images recorded.  
appears.  
When you selected [DUB by date], select  
the date of the images to be dubbed with  
When connecting an external media  
The images saved in the external media  
are displayed on the LCD screen. The  
movie display and photo display buttons  
on the VISUAL INDEX screen change as  
illustrated below.  
/
, then touch  
and go  
to step .  
Remaining external media capacity  
Press and hold the image down on the  
LCD screen to confirm the image. Touch  
to return to the previous screen.  
By touching date, you can search for  
images by date.  
You can make menu settings of the external  
media such as deleting images. Touch  
(MENU) [Show others] on the VISUAL  
INDEX screen.  
Touch  
[YES]   
on the  
camcorder screen.  
5G0B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Creating a disc with a  
DVD writer, recorder  
To play back images in the external  
media on the camcorder  
Touch [Play without copying.] in step 5  
above.  
Selecting the method for creating  
a disc  
Several methods for creating an AVCHD  
disc or a standard definition image quality  
(STD) disc from high definition image  
quality (HD) movies or photos recorded on  
your camcorder are described here. Select  
the method that suits your disc player.  
The VISUAL INDEX screen of the  
external media is displayed.  
Play back the image (p. 29).  
You can also view images on a TV  
connected to your camcorder (p. 37).  
You can play back the high definition  
image quality (HD) movies on your  
computer using [Player for AVCHD]. Start  
[Player for AVCHD], and select the drive  
where the external media is connected  
with [Settings].  
Notes  
Prepare a DVD disc such as a DVD-R, for  
creating a disc.  
See page 49 to save images in the external  
media.  
AVCHD format compatible device  
Notes  
The Date Index of photos cannot be displayed.  
If your camcorder does not recognize the  
external media, try the following operations.  
Reconnect the USB Adaptor Cable to your  
camcorder  
Player  
Sony Blu-ray disc player  
PlayStation3, etc.  
If the external media has the AC power cable,  
connect it to the wall outlet (wall socket)  
To finish the external media connection  
Touch  
screen of the external media.  
Disconnect the USB Adaptor Cable.  
on the VISUAL INDEX  
Creating device  
DVD writer, DVDirect Express (p. 52)  
DVD writer, etc., other than DVDirect  
Express (p. 55)  
Disc type  
AVCHD disc (high definition image quality  
(HD))  
GB  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Ordinary DVD device  
Creating a disc with the dedicated  
DVD writer, DVDirect Express  
Player  
DVD player  
Computer that can play DVDs, etc.  
You can create a disc or play back the  
images on a created disc by using the  
dedicated DVD writer, DVDirect Express  
(sold separately).  
Refer also to the instruction manual  
supplied with the DVD writer.  
Notes  
Creating device  
Connect your camcorder to the wall outlet (wall  
socket) using the supplied AC Adaptor for this  
operation (p. 14).  
Only unused discs of the following types can  
be used:  
12cm DVD-R  
12cm DVD+R  
DVD writer, DVDirect Express (p. 52)  
DVD writer, other than DVDirect Express  
(p. 55)  
Disc recorder, etc. (p. 56)  
Disc type  
Standard definition image quality (STD) disc  
The device does not support two-layered discs.  
DVDirect Express is referred to as “DVD  
writer” in this section.  
Notes  
Connect the AC Adaptor and the  
power cord (mains lead) to the  
DC IN jack of your camcorder  
and the wall outlet (wall socket)  
Always maintain your PlayStation3 to use  
the latest version of the PlayStation3 system  
software.  
The PlayStation3 may not be available in some  
countries/regions.  
The AVCHD disc can be played back only on  
AVCHD format compatible devices.  
The AVCHD disc should not be used in DVD  
players/recorders. Because DVD players/  
recorders are not compatible with the AVCHD  
format, DVD players/recorders may fail to eject  
the disc.  
Turn on your camcorder, and  
connect the DVD writer to the   
(USB) jack of your camcorder with  
the USB cable of the DVD writer.  
You cannot create an AVCHD disc from a  
movie recorded with [HD FX] mode of  
[
REC MODE]. Save a movie recorded with  
[HD FX] mode onto Blu-ray discs or external  
storage devices (p. 49).  
5G2B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
To customize a disc with DISC BURN  
OPTION  
Perform this operation in the following  
Insert an unused disc into the  
DVD writer, and close the disc  
tray.  
cases:  
When dubbing a desired image  
When creating multiple copies of the same  
disc  
The [DISC BURN] screen appears on  
the camcorder screen.  
When converting high definition (HD)  
movies to standard definition (STD) movies,  
and creating a disc  
When dubbing images in the memory card  
(HDR-CX116E/CX150E/CX155E/XR150E/  
XR155E)  
Touch [DISC BURN OPTION] in step 4.  
Select the recording media containing  
the movie(s) you want to save (HDR-  
CX116E/CX150E/CX155E/XR150E/XR155E).  
When you select movies with high  
Press  
(DISC BURN) on the DVD  
writer.  
Movies that have not been saved on  
any discs will be recorded onto the disc  
(HDR-CX110E/CX115E).  
Movies recorded on the internal  
recording media that have not been  
saved on any discs will be recorded  
onto the disc (HDR-CX116E/CX150E/  
CX155E/XR150E/XR155E).  
When there are unsaved high definition  
(HD) and standard definition (STD)  
image quality movies, they will be saved  
on individual discs according to the image  
quality.  
definition image quality (HD), the  
screen to select the image quality of the  
disc to be created appears on the LCD  
screen. Select the desired image quality,  
and touch  
.
The image quality of the disc depends on  
the recording time of the selected movies  
when you create a disc converting them  
from high definition image quality (HD)  
to standard definition image quality  
(STD).  
Repeat steps 3 and 4 when the  
total memory size of movies to  
be burnt exceeds that of the disc.  
Touch the movie you want to burn on  
the disc.  
appears.  
Touch  
[END] [EJECT  
DISC] on the camcorder screen.  
Remove the disc after the operation is  
completed.  
Touch  
USB cable.  
, then disconnect the  
Remaining Disc capacity  
Press and hold the image down on the  
LCD screen to confirm the image. Touch  
to return to the previous screen.  
GB  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
By touching date, you can search for  
images by date.  
To play back a disc on the DVD writer  
Touch  
screen.  
[YES] on the camcorder  
To create another disc of the same  
contents, insert a new disc and touch  
[CREATE SAME DISC].  
After the operation is completed, touch  
[EXIT] [END] on the camcorder  
screen.  
Disconnect the USB cable from your  
camcorder.  
Connect the AC Adaptor and the power  
cord (mains lead) to the DC IN jack of  
your camcorder and the wall outlet (wall  
socket) (p. 14).  
Turn on your camcorder, and connect  
the DVD writer to the (USB) jack of  
your camcorder with the USB cable of  
Notes  
Do not do any of the following when creating  
a disc.  
Turn off the camcorder  
the DVD writer.  
Disconnect the USB cable or the AC adaptor  
Subject the camcorder to mechanical shock  
or vibration  
Eject the memory card from the camcorder  
Play the created disc to make sure dubbing was  
performed correctly before deleting the movies  
on your camcorder.  
If [Failed.] or [DISC BURN failed.] appears on  
the screen, insert another disc into the DVD  
writer and perform the DISC BURN operation  
again.  
You can play back movies on the TV  
screen by connecting the camcorder to a  
TV (p. 37).  
Insert a created disc into the DVD  
writer.  
The movies on the disc appear as  
VISUAL INDEX on the camcorder  
screen.  
Press the play button on the DVD writer.  
You can also operate by the camcorder  
screen.  
Tips  
If the total memory size of movies to be burnt  
by the DISC BURN operation exceeds that of  
the disc, disc creation stops when the limit is  
reached. The last movie on the disc may be  
cut off.  
Disc creation time to dub movies to the limit  
of the disc is about 20 to 60 minutes. It may  
take more time depending on the recording  
mode or the number of scenes. Also, if high  
definition image quality (HD) is converted to  
standard definition image quality (STD), image  
quality conversion takes longer than the actual  
recording.  
Touch [END] [EJECT DISC] on the  
camcorder screen and remove the disc  
after the operation is completed.  
Touch  
and disconnect the USB  
cable.  
To play back a disc on the ordinary DVD  
player  
Select the standard image quality (STD)  
on the screen to select the image quality  
of the disc to be created in step of  
To customize a disc with DISC BURN  
OPTION.”  
5G4B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tips  
If you cannot play back created standard  
definition (STD) image quality discs on any  
DVD player, connect the camcorder to the  
DVD writer, and then play back.  
Creating a high definition image  
quality (HD) disc with a DVD writer,  
etc., other than DVDirect Express  
Use USB cable to connect your camcorder  
to a disc creation device, which is  
compatible with high definition image  
quality (HD) movies, such as a Sony DVD  
writer. Refer also to the instruction manuals  
supplied with the device to be connected.  
The [USB SELECT] screen appears on  
the camcorder screen.  
If the [USB SELECT] screen does not  
appear, touch  
(MENU) [Show  
others] [USB CONNECT] (under  
[OTHERS] category).  
Notes  
Connect your camcorder to the wall outlet (wall  
socket) using the supplied AC Adaptor for this  
operation (p. 14).  
Sony DVD writer may not be available in some  
countries/regions.  
Touch the recording media that  
contains the images on the  
camcorder screen.  
[
USB CONNECT]: Internal  
Connect the AC Adaptor and the  
power cord (mains lead) to the  
DC IN jack of your camcorder  
and the wall outlet (wall socket)  
memory  
[
disk  
[
The displayed recording media differ  
depending on the model.  
USB CONNECT]: Internal hard  
USB CONNECT]: Memory card  
Turn on your camcorder, and  
connect a DVD writer, etc. to the  
(USB) jack of your camcorder  
with the USB cable (supplied).  
Record movies on the connected  
device.  
For details, refer to the instruction  
manuals supplied with the device to be  
connected.  
After the operation is completed,  
touch [END] [YES] on the  
camcorder screen.  
GB  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Disconnect the USB cable.  
A/V Remote Connector  
*
Creating a standard definition  
image quality (STD) disc with a  
recorder, etc.  
**  
You can dub images played back on your  
camcorder on a disc or video cassette,  
by connecting your camcorder to a disc  
recorder, a Sony DVD writer, etc., other  
than DVDirect Express, with the A/V  
connecting cable. Connect the device in  
either way of or . Refer also to the  
instruction manuals supplied with the  
devices to be connected.  
Input  
S VIDEO  
VIDEO  
(Yellow)  
(White)  
Notes  
Connect your camcorder to the wall outlet (wall  
socket) using the supplied AC Adaptor for this  
operation (p. 14).  
AUDIO  
Sony DVD writer may not be available in some  
countries/regions.  
(Red)  
(Yellow)  
High definition image quality (HD) movies  
will be dubbed with standard definition image  
quality (STD).  
Signal flow  
A/V connecting cable (supplied)  
Connect the A/V connecting cable to the  
input jack of another device.  
*
HDR-CX110E/CX115E/CX116E/CX150E/  
CX155E  
A/V connecting cable with S VIDEO  
** HDR-XR150E/XR155E  
(sold separately)  
When connecting to another device  
via the S VIDEO jack, by using an A/V  
connecting cable with an S VIDEO cable  
(sold separately), higher quality images can  
be produced than with an A/V connecting  
cable. Connect the white and red plug  
(left/right audio) and the S VIDEO plug  
(S VIDEO channel) of the A/V connecting  
cable with an S VIDEO cable. If you  
connect the S VIDEO plug only, you will  
hear no sound. The yellow plug (video)  
connection is not necessary.  
Insert the recording media in the  
recording device.  
If your recording device has an input  
selector, set it to the input mode.  
Connect your camcorder to the  
recording device (a disc recorder,  
5GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
etc.) with the A/V connecting  
cable (supplied) or an A/V  
connecting cable with S VIDEO  
(sold separately).  
Connect your camcorder to the input jacks  
of the recording device.  
[GENERAL SET] category) [TV TYPE]   
[4:3]   
When you connect a monaural device, connect  
the yellow plug of the A/V connecting cable  
to the video input jack, and the white (left  
channel) or the red (right channel) plug to the  
audio input jack on the device.  
.
Start playback on your  
camcorder, and record it on the  
recording device.  
Refer to the instruction manuals supplied  
with your recording device for details.  
When dubbing is finished, stop  
the recording device, and then  
your camcorder.  
Notes  
Since dubbing is performed via analog data  
transfer, the image quality may deteriorate.  
You cannot dub images to recorders connected  
with an HDMI cable.  
To hide the screen indicators (such as a counter,  
etc.) on the screen of the monitor device  
connected, touch  
(MENU) [Show  
others] [OUTPUT SETTINGS] (under  
[GENERAL SET] category) [DISP  
OUTPUT] [LCD PANEL] (the default  
setting)   
To record the date/time or camera settings data,  
touch (MENU) [Show others]   
[PLAYBACK SET] (under [PLAYBACK]  
category) [DATA CODE] a desired  
.
setting   
addition, touch  
. In  
(MENU) [Show  
others] [OUTPUT SETTINGS] (under  
[GENERAL SET] category) [DISP  
OUTPUT] [V-OUT/PANEL]   
.
When the screen size of display devices (TV,  
etc.) is 4:3, touch (MENU) [Show  
others] [OUTPUT SETTINGS] (under  
GB  
5ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing your camcorder  
Using menus  
Using the menus, you can perform useful functions and change various settings. If you make  
good use of menu operations, you can enjoy using your camcorder.  
The camcorder has various menu items under each of eight menu categories.  
MANUAL SETTINGS (Items to adjust for scene condition) p. 63  
SHOOTING SET (Items for customized shooting) p. 67  
PHOTO SETTINGS (Items for recording photos) p. 71  
PLAYBACK (Items for playback) p. 72  
EDIT (Items for editing) p. 73  
OTHERS (Items for other settings) p. 74  
MANAGE MEDIA (Items for recording media) p. 74  
GENERAL SET (Other setup items) p. 76  
Operating menus  
/
/
: The menu list moves from category to category.  
: The menu list moves through 4 items at once.  
You can touch buttons and drag the screen to scroll the list of the menu.  
The selected category icon is displayed in orange.  
When you touch  
, the screen returns to the MY MENU screen.  
Touch  
(MENU).  
Touch [Show others] on the MY MENU screen.  
See the next page for details on MY MENU.  
Touch the central part of the left side of screen to change the display.  
Touch the menu item to be changed.  
After changing the setting, touch  
.
To finish setting the menu, touch  
.
To return to the previous menu screen, touch  
.
may not be displayed depending on the menu item.  
5G8B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Notes  
You may not be able to set some menu items, depending on the recording or playback conditions.  
Grayed out menu items or settings are not available.  
Tips  
Depending on the menu items being changed, your camcorder switches between playback mode and  
recording mode (movie/photo).  
Using MY MENU  
You can use the menu items more easily by registering the menu items you use most often on  
MY MENU. You can register 6 menu items on each MY MENU of the MOVIE, PHOTO, and  
PLAYBACK.  
Example: deleting [SPOT MTR/FCS] and registering [ FADER]  
Touch  
(MENU).  
Touch [MY MENU SETTING].  
Touch [MOVIE].  
Touch [SPOT MTR/FCS].  
Touch  
Touch [ FADER] (under  
When MY MENU is displayed, touch  
.
[MANUAL SETTINGS] category).  
.
Repeat the same steps above to register menu items on MY MENU, and enjoy using your  
“Handycam.”  
Tips  
When an external storage device is connected, the exclusive MY MENU appears.  
GB  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the OPTION MENU  
The OPTION MENU appears just like the pop-up window that appears when you right-click  
the mouse on a computer. When  
the OPTION MENU. You touch  
appear.  
is displayed at bottom-right of the screen, you can use  
, and the menu items you can change in the context  
Menu item  
Tab  
Touch  
(OPTION).  
Touch the desired tab the item to change the setting.  
After completing the setting, touch  
.
Notes  
Grayed out menu items or settings are not available.  
When the item you want is not on the screen, touch another tab. (There may be no tab.)  
The tabs and items that appear on the screen depend on the recording/playback status of your camcorder  
at the time.  
G0B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Menu lists  
(PLAYBACK) category  
VISUAL INDEX  
VIEW IMAGES  
DATE INDEX  
FILM ROLL  
(MANUAL SETTINGS) category  
SCENE SELECTION  
FADER  
WHITE BAL.  
SPOT MTR/FCS  
SPOT METER  
SPOT FOCUS  
EXPOSURE  
FOCUS  
TELE MACRO  
SMTH SLW REC  
FACE  
PLAYLIST  
HIGHLIGHT  
SCENARIO  
PLAYBACK SET  
/
SET  
DATA CODE  
(SHOOTING SET) category  
/
SET  
(EDIT) category  
DELETE  
REC MODE  
GUIDEFRAME  
STEADYSHOT  
CONVERSION LENS  
LOW LUX  
FACE DETECTION  
PRIORITY SETTING  
SMILE DETECTION  
SMILE SENSITIVITY  
AUDIO REC SET  
BLT-IN ZOOM MIC  
MICREF LEVEL  
OTHER REC SET  
DIGITAL ZOOM  
AUTO BACK LIGHT  
X.V.COLOR  
DELETE  
DELETE  
SCENARIO ERASE  
ERASE  
ERASE ALL  
PROTECT  
PROTECT  
PROTECT  
DIVIDE  
PHOTO CAPTURE*1*2*4  
MOVIE DUB*1*2  
DUB by select  
DUB by date  
DUB ALL/  
DUB ALL  
PHOTO COPY*1*2  
COPY by select  
COPY by date  
PLAYLIST EDIT  
WIDE SELECT  
(PHOTO SETTINGS) category  
SELF-TIMER  
IMAGE SIZE  
ADD/  
ADD  
FILE NO.  
ADD by date/  
ADD by date 47  
ERASE 47  
ERASE/  
ERASE ALL/  
ERASE ALL  
MOVE/  
MOVE  
GB  
ꢀ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CLOCK/ LANG  
CLOCK SET  
(OTHERS) category  
USB CONNECT  
USB CONNECT*1  
USB CONNECT*2  
USB CONNECT  
AREA SET  
SUMMERTIME  
LANGUAGE SET  
Operating Guide  
POWER SETTINGS  
A.SHUT OFF  
DISC BURN  
TV CONNECT Guide  
MUSIC TOOL*3  
POWER ON BY LCD  
EMPTY MUSIC  
OTHER SETTINGS  
DEMO MODE  
DOWNLOAD MUSIC  
BATTERY INFO  
CALIBRATION  
CTRL FOR HDMI  
DROP SENSOR*2  
(MANAGE MEDIA) category  
MEDIA SETTINGS  
MOVIE MEDIA SET*1*2  
PHOTO MEDIA SET*1*2  
MEDIA INFO  
*1 HDR-CX116E/CX150E/CX155E  
*2 HDR-XR150E/XR155E  
*3 HDR-CX110E/CX150E/XR150E  
*4 HDR-CX110E  
MEDIA FORMAT  
INT. MEMORY*1  
HDD*2  
MEMORY CARD*1*2  
REPAIR IMG.DB F.  
INT. MEMORY*1  
HDD*2  
MEMORY CARD*1*2  
(GENERAL SET) category  
SOUND/DISP SET  
VOLUME  
BEEP  
LCD BRIGHT  
LCD BL LEVEL  
LCD COLOR  
DISPLAY SET  
OUTPUT SETTINGS  
TV TYPE  
COMPONENT  
HDMI RESOLUTION  
DISP OUTPUT  
G2B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUAL  
SETTINGS  
(Items to adjust for scene  
condition)  
SPOTLIGHT** (  
)
Prevents people’s faces from  
appearing excessively white  
when subjects are lit by  
strong light.  
See “Using menus” (p. 58) on the operation.  
The default settings are marked with .  
BEACH** (  
)
Takes the vivid blue of the  
ocean or a lake.  
SCENE SELECTION  
You can record images effectively in various  
situations.  
SNOW** (  
Takes bright pictures of a  
white landscape.  
)
AUTO  
Records images in average image quality  
*
Adjusted to focus on subjects farther away  
only.  
** Adjusted not to focus on subjects a short  
without the [SCENE SELECTION] function.  
TWILIGHT* (  
)
Maintains the darkening  
atmosphere of the distant  
surroundings in twilight  
scenes.  
distance away.  
Notes  
If you set [SCENE SELECTION], [WHITE  
BAL.] setting is canceled.  
SUNRISE&SUNSET* (  
Reproduces the atmosphere  
of scenes such as sunsets or  
sunrises.  
)
FADER  
You can record a transition with the  
following effects adding to the interval  
between scenes.  
Select the desired effect in [STBY] (to  
fading in) or [REC] (to fading out) mode.  
FIREWORKS* (  
)
Takes spectacular shots of  
fireworks.  
LANDSCAPE* (  
)
Shoots distant subjects  
clearly. This setting also  
prevents your camcorder  
from focusing on glass or  
metal mesh in windows  
between the camcorder and  
the subject.  
OFF  
Does not use an effect.  
WHITE FADER  
Fades in/out with the white effect.  
Out  
In  
PORTRAIT (Soft portrait)  
(
)
Brings out the subject such  
as people or flowers while  
creating a soft background.  
GB  
ꢀ3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
BLACK FADER  
Fades in/out with the black effect.  
Out  
INDOOR ()  
The white balance is appropriately adjusted  
for the following recording conditions:  
In  
Indoors  
At party scenes or studios where the  
lighting conditions change quickly  
Under video lamps in a studio, or under  
sodium lamps or incandescent-like color  
lamps  
To cancel the fader before starting the  
operation, touch [OFF].  
ONE PUSH (  
The white balance will be adjusted  
according to the ambient light.  
)
Tips  
When you press START/STOP, the setting is  
cleared.  
A movie recorded using [BLACK FADER] may  
be difficult to see in the VISUAL INDEX screen.  
Touch [ONE PUSH].  
Frame a white object such as a piece of  
paper, to fill the screen under the same  
lighting conditions as you will shoot the  
subject.  
WHITE BAL. (White balance)  
Touch [  
].  
You can adjust the color balance to the  
brightness of the recording environment.  
flashes quickly. When the white  
balance has been adjusted and stored in the  
memory, the indicator stops flashing.  
Notes  
Set [WHITE BAL.] to [AUTO] or adjust the  
color in [ONE PUSH] under white or cool  
white fluorescent lamps.  
When you select [ONE PUSH], keep framing  
AUTO  
white objects while  
flashes slowly if [ONE PUSH] could not  
be set.  
When [ONE PUSH] was selected, if  
is flashing quickly.  
The white balance is adjusted automatically.  
OUTDOOR (  
The white balance is appropriately adjusted  
for the following recording conditions:  
)
keeps  
, set [WHITE  
flashing after touching  
Outdoors  
Night views, neon signs and fireworks  
Sunrise or sunset  
BAL.] to [AUTO].  
If you set [WHITE BAL.], [SCENE  
SELECTION] is set to [AUTO].  
Under daylight fluorescent lamps  
Tips  
If you have changed the battery pack while  
[AUTO] was selected, or taken your camcorder  
outdoors after inside use (or vice versa), aim  
your camcorder at a nearby white object for  
about 10 seconds for better color balance  
adjustment.  
When the white balance has been set with  
[ONE PUSH], if the lighting conditions  
changed by bringing your camcorder outdoors  
G4B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
from inside the house, or vice versa, you need  
to redo the [ONE PUSH] procedure to readjust  
the white balance.  
To return the setting to automatic exposure,  
touch [AUTO].  
Notes  
[EXPOSURE] is automatically set to  
[MANUAL].  
SPOT MTR/FCS (Spot meter/  
focus)  
SPOT FOCUS  
You can adjust the brightness and focus  
for the selected subject simultaneously.  
This function enables you to use [SPOT  
METER] (p. 65) and [SPOT FOCUS]  
(p. 65) at the same time.  
You can select and adjust the focal point to  
aim it at a subject not located at the center  
of the screen.  
Touch the subject in the frame of which you  
want to adjust the focus.  
To adjust the focus automatically, touch  
[AUTO].  
Touch the subject in the frame of which you  
want to adjust the brightness and focus.  
To adjust the brightness and focus  
automatically, touch [AUTO].  
Notes  
Notes  
[FOCUS] is automatically set to [MANUAL].  
[EXPOSURE] and [FOCUS] are automatically  
set to [MANUAL].  
EXPOSURE  
SPOT METER (Flexible spot  
meter)  
You can fix the brightness of a picture  
manually. Adjust the brightness when the  
subject is too bright or too dark.  
You can adjust and fix the exposure  
to the subject, so that it is recorded in  
suitable brightness even when there is  
strong contrast between the subject and  
the background, such as subjects in the  
spotlight on stage.  
Touch  
/
to adjust the brightness.  
To adjust the exposure automatically, touch  
[AUTO].  
Touch the subject in the frame of which you  
want to adjust the exposure.  
GB  
ꢀ5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
FOCUS  
TELE MACRO  
You can adjust the focus manually. You can  
select this function also when you want to  
focus on a certain subject intentionally.  
This is useful to shoot small subjects, such  
as flowers or insects. You can blur out  
backgrounds and the subject stands out  
clearer.  
OFF  
Cancels TELE MACRO. (TELE MACRO is  
also canceled when you move the zoom lever  
to the W side.)  
Touch  
(nearby subject)/  
(distant  
ON (  
)
subject) to adjust the focus.  
The zoom (p. 25) moves to the top of the T  
(telephoto) side automatically and allows  
recording subjects at a close distance down to  
about 38 cm (15 in.).  
To adjust the focus automatically, touch  
[AUTO].  
Notes  
When you set [FOCUS] to [MANUAL],   
appears.  
The minimum possible distance between  
camcorder and subject while maintaining sharp  
focus is about 1 cm (about 13/32 in.) for wide  
angle and about 80 cm (about 31 1/2 in.) for  
telephoto.  
Notes  
Tips  
When recording a distant subject, focusing may  
be difficult and can take some time.  
Adjust the focus manually ([FOCUS], p. 66)  
when it is hard to focus automatically.  
appears when the focus cannot be adjusted  
any closer, and appears when the focus  
cannot be adjusted farther away.  
It is easier to focus on the subject by moving  
the power zoom lever towards T (telephoto) to  
adjust the focus, then towards W (wide angle)  
to adjust the zoom for recording. When you  
want to record a subject at close range, move  
the power zoom lever to W (wide angle), then  
adjust the focus.  
The focal distance information (distance at  
which the subject is focused on; used as a guide  
if it is dark and focus adjustment is difficult)  
appears for a few seconds in the following cases.  
(This information will not display correctly if a  
conversion lens (sold separately) is being used.)  
When the focus mode is switched from  
automatic to manual  
SMTH SLW REC (Smooth slow  
rec)  
Fast moving subjects and actions, which  
cannot be captured under the ordinary  
shooting conditions, can be shot in smooth  
moving slow-motion for about 3 seconds.  
Press START/STOP on the [SMTH SLW  
REC] screen.  
An about-3-second movie is recorded  
as a 12-second-slow-motion movie.  
[Recording…] disappears, when recording  
is finished.  
When you set focus manually  
GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
SHOOTING SET  
(Items for customized  
Touch  
recording.  
to cancel the smooth slow  
shooting)  
See “Using menus” (p. 58) on the operation.  
The default settings are marked with .  
To change the setting  
Touch  
(OPTION), then select the  
setting you want to change.  
/
SET  
[TIMING]  
See page 26.  
Select the recording start point after  
START/STOP is pressed. The default  
setting is [3sec AFTER].  
REC MODE (Recording  
mode)  
The point when START/STOP is pressed.  
See page 26.  
GUIDEFRAME  
[3sec AFTER]  
You can display the frame and check that  
the subject is horizontal or vertical.  
The frame is not recorded.  
[3sec BEFORE]  
OFF  
Does not display the guide frame.  
Notes  
ON  
You cannot record sound.  
Image quality is not as good as that of normal  
recording.  
Displays the guide frame.  
Tips  
Positioning the subject at the cross point of the  
guide frame makes a balanced composition.  
The outer frame of [GUIDEFRAME] shows the  
display area of a TV which is not compatible  
with full pixel display.  
GB  
ꢀꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
LOW LUX  
STEADYSHOT  
You can record bright color images, even in  
dim light.  
You can compensate for camera shake.  
Set [ STEADYSHOT] to [OFF] (  
)
when using a tripod (sold separately), then  
the image becomes natural.  
OFF  
The LOW LUX function is not used.  
ACTIVE  
ON ( )  
Provides a more powerful SteadyShot effect.  
The LOW LUX function is used.  
STANDARD  
Provides the SteadyShot effect under relatively  
stable recording conditions.  
FACE DETECTION  
Detects the faces of your subjects  
and adjusts the focus/color/exposure  
automatically. Also, it adjusts the image  
quality of face parts more finely, in the case  
of the high definition image quality (HD)  
movies.  
OFF (  
)
The SteadyShot function is not used.  
Notes  
If you change the setting of  
STEADYSHOT], the imaging field will also  
change accordingly.  
[
ON  
Detects faces.  
CONVERSION LENS  
OFF (  
)
When using a conversion lens (sold  
separately), use this function to record  
using the optimum compensation for  
camera shake and focus for the lens.  
Does not detect faces.  
Notes  
Faces may not be detected depending on  
recording conditions, subject conditions, and  
the setting of your camcorder.  
[FACE DETECTION] may not function  
properly depending on recording conditions.  
Set [FACE DETECTION] to [OFF] in this case.  
OFF  
Select this when you do not use a conversion  
lens.  
WIDE CONVERSION (  
)
Select this when you use a wide-conversion  
lens.  
Tips  
For better face detection performance, shoot the  
subject(s) under the following conditions:  
Shoot in a sufficiently bright place  
The subject(s) does not wear glasses, a hat  
or mask  
TELE CONVERSION (  
)
Select this when you use a tele-conversion  
lens.  
The subject(s) faces directly towards the  
camera  
The detected faces are recorded in Face Index,  
however, some faces may not be. Also, there  
is a limit to the number of faces that can be  
recorded in Face Index. To play back from the  
Face Index, see page 33.  
G8B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
When [DUAL CAPTURE] is selected,  
appears on the screen in movie recording  
PRIORITY SETTING  
standby, and changes into  
recording starts.  
when movie  
Selects the priority subject for the face  
detection or the smile shutter.  
Adjusts focus/color/exposure automatically  
for the selected faces.  
SMILE SENSITIVITY  
Sets the smile detection sensitivity using the  
Smile Shutter function.  
AUTO  
Detects faces automatically.  
CHILD PRIORITY  
Detects with priority on a childs face.  
HIGH  
Detects even a slight smile.  
ADULT PRIORITY  
Detects with priority on an adults face.  
MEDIUM  
Detects a normal smile.  
LOW  
Detects a big smile.  
Tips  
When you specify the priority subject by  
touching the detection frame on the LCD  
screen, the face with a double-lined frame has  
priority (p. 27).  
AUDIO REC SET  
BLT-IN ZOOM MIC (Built-in zoom  
microphone)  
SMILE DETECTION  
The shutter is released when the camcorder  
detects a smile (Smile Shutter).  
You can record a movie with vivid sound  
appropriate to the zoom position.  
DUAL CAPTURE (  
)
OFF  
Only during movie recording, the shutter is  
released automatically, when the camcorder  
detects a smile.  
The microphone does not record sound  
following zooming in or out.  
ON (  
)
The microphone records sound following  
zooming in or out.  
ALWAYS ON (  
)
The shutter is released when the camcorder  
detects a smile whenever the camcorder is in  
recording mode.  
MICREF LEVEL (Microphone  
reference level)  
OFF  
Smiles are not detected, so photos are not  
recorded automatically.  
You can select the microphone level for  
recording sound.  
NORMAL  
Notes  
Records various ambient sounds, converting  
them into the appropriate level.  
Smiles may not be detected depending on  
recording conditions, subject conditions, and  
the setting of your camcorder.  
GB  
ꢀ9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
X.V.COLOR  
LOW (  
)
Records ambient sound faithfully. Select  
[LOW] when you want to record an exciting  
and powerful sound in a concert hall, etc.  
(This setting is not suitable for recording  
conversations.)  
You can capture wider range of colors.  
Various colors such as the brilliant color of  
flowers and turquoise blue of the sea can  
be more faithfully reproduced. Refer to the  
instruction manuals of the TV.  
OFF  
OTHER REC SET  
Records in ordinary color range.  
ON (  
Records in x.v.Color.  
)
DIGITAL ZOOM  
You can select the maximum zoom level up  
to 25× in case you want to zoom to a level  
greater than following optical zoom during  
recording. Note that the image quality  
decreases when you use the digital zoom.  
Notes  
Set [ X.V.COLOR] to [ON] when the  
recorded movie will be played back on an  
x.v.Color-compliant TV.  
If the movie recorded with this function [ON] is  
played back on a non-x.v.Color-compliant TV,  
the color may not be reproduced correctly.  
[ X.V.COLOR] cannot be set to [ON]:  
When recording standard definition image  
quality (STD) movies  
The right side of the bar shows the digital  
zooming factor. The zooming zone appears  
when you select [300×].  
While recording a movie  
WIDE SELECT  
When recording standard definition image  
quality (STD) movies, you can select the  
horizontal to vertical ratio according to the  
TV connected. Refer also to the instruction  
manuals supplied with your TV.  
OFF  
Up to 25× zoom is performed optically.  
300×  
Up to 300× zoom is performed digitally.  
16:9 WIDE  
Records movies to the full screen on a 16:9  
(wide) TV screen.  
AUTO BACK LIGHT  
Your camcorder adjusts the exposure for  
backlit subjects automatically.  
4:3 (  
)
ON  
Records movies to the full screen on a 4:3  
TV screen.  
Adjusts the exposure for backlit subjects  
automatically.  
OFF  
Notes  
Does not adjust the exposure for backlit  
subjects.  
Set [TV TYPE] correctly according to the TV  
connected for playback (p. 77).  
G0B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
PHOTO SETTINGS  
(Items for recording photos)  
FILE NO. (File number)  
See “Using menus” (p. 58) on the operation.  
The default settings are marked with .  
You can select the way to assign file number  
of photos.  
SELF-TIMER  
SERIES  
Assigns file numbers of photos in sequence.  
The file number becomes larger each time  
you record a photo.  
Press PHOTO to start the count down. A  
photo is recorded after about 10 seconds.  
OFF  
Even if the memory card is replaced with  
another one, the file number is assigned in  
sequence.  
Cancels the self-timer.  
ON (  
)
Starts the self-timer recording. To cancel the  
recording, touch [RESET].  
RESET  
Assigns file numbers in sequence, following  
the largest file number existing on the  
recording medium.  
When the memory card is replaced with  
another one, the file number is assigned for  
each memory card.  
IMAGE SIZE  
You can select a photo size to be shot.  
3.1M (  
)
Records photos clearly (2,048 × 1,536).  
2.4M (  
)
Records photos clearly in the 16:9 (wide) ratio  
(2,048 × 1,152).  
1.9M (  
)
Allows you to record more photos in  
relatively clear quality (1,600 × 1,200).  
VGA(0.3M) (  
)
Allows the maximum number of photos to be  
recorded (640 × 480).  
Notes  
The selected image size is effective when the  
(Photo) lamp is lit.  
See page 92 for the number of recordable  
photos.  
GB  
ꢁ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
PLAYBACK  
(Items for playback)  
DATA CODE  
See “Using menus” (p. 58) on the operation.  
During playback, your camcorder displays  
the information (Date/time, Camera data)  
recorded automatically at the time of  
recording.  
VISUAL INDEX  
See page 29.  
OFF  
VIEW IMAGES  
Data code is not displayed.  
DATE/TIME  
Displays the date and time.  
DATE INDEX  
See page 32.  
CAMERA DATA  
Displays camera setting data.  
FILM ROLL  
See page 32.  
DATE/TIME  
FACE  
See page 33.  
PLAYLIST  
See page 46.  
Date  
Time  
HIGHLIGHT  
See page 33.  
CAMERA DATA  
Movie  
SCENARIO  
See page 34.  
PLAYBACK SET  
/
SET  
See page 26.  
Photo  
SteadyShot off  
Brightness  
G2B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
EDIT  
(Items for editing)  
White balance  
Gain  
Shutter speed  
Aperture value  
Exposure  
See “Using menus” (p. 58) on the operation.  
DELETE  
See page 40.  
Tips  
The data code is displayed on the TV screen if  
you connect your camcorder to a TV.  
Depending on the recording media condition,  
bars [--:--:--] appear.  
SCENARIO ERASE  
See page 35.  
PROTECT  
See page 41.  
DIVIDE  
See page 42.  
PHOTO CAPTURE (HDR-  
CX110E/CX116E/CX150E/  
CX155E/XR150E/XR155E)  
See page 43.  
MOVIE DUB (HDR-CX116E/  
CX150E/CX155E/XR150E/  
XR155E)  
See page 44.  
PHOTO COPY (HDR-CX116E/  
CX150E/CX155E/XR150E/  
XR155E)  
See page 45.  
PLAYLIST EDIT  
See page 46.  
GB  
ꢁ3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
OTHERS  
(Items for other settings)  
MANAGE MEDIA  
(Items for recording media)  
See “Using menus” (p. 58) on the operation.  
See “Using menus” (p. 58) on the operation.  
The default settings are marked with .  
MEDIA SETTINGS (HDR-  
CX116E/CX150E/CX155E/  
XR150E/XR155E)  
USB CONNECT  
See page 51.  
See page 17.  
TV CONNECT Guide  
MEDIA INFO  
See page 37.  
You can check the remaining recordable  
time for each recording mode of the  
recording media for movies and the  
approximate free and used media space of  
the recording media.  
MUSIC TOOL (HDR-CX110E/  
CX150E/XR150E)  
See page 35.  
BATTERY INFO  
To turn off the display  
You can check the estimated remaining  
capacity of the battery.  
Touch  
.
Notes  
Since there is a management file area, the  
used space is not displayed as 0 % even if you  
perform [MEDIA FORMAT] (p. 74).  
Tips  
Only the information of the medium selected  
on [MOVIE MEDIA SET] (p. 17) is displayed.  
Change the medium setting if necessary (HDR-  
CX116E/CX150E/CX155E/XR150E/XR155E).  
To close the battery information screen  
Touch  
.
MEDIA FORMAT  
Formatting deletes all the movies and  
photos to recover recordable free space.  
HDR-CX110E/CX115E:  
Touch [YES] [YES]   
.
HDR-CX116E/CX150E/CX155E/XR150E/  
XR155E:  
Select the recording media to be formatted,  
touch [YES] [YES]   
.
Notes  
Connect your camcorder to the wall outlet (wall  
socket) using AC Adaptor supplied for this  
operation (p. 14).  
G4B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
To avoid the loss of important images, you  
should save them before formatting the  
recording media.  
Protected movies and photos will also be  
deleted.  
While [Executing…] is displayed, do not close  
the LCD screen, operate the buttons on the  
camcorder, disconnect the AC Adaptor, or eject  
the memory card from your camcorder (The  
access lamp is lit or flashing while formatting  
memory card.).  
or shocks to your camcorder.  
The actual performing time for deleting data is  
as follows;  
HDR-CX116E: about 1 minute  
HDR-CX150E/CX155E: about 2 minutes  
HDR-XR150E/XR155E: about 60 minutes  
If you stop performing [EMPTY] while  
[Executing…] appears, be sure to complete the  
operation by performing [MEDIA FORMAT]  
or [EMPTY] when you use the camcorder next  
time.  
To prevent data on the internal  
recording media from being recovered  
(HDR-CX116E/CX150E/CX155E/XR150E/  
XR155E)  
REPAIR IMG.DB F.  
[EMPTY] allows you to write unintelligible  
data onto the internal recording media of  
the camcorder. In this way it may become  
more difficult to recover any original  
data. When you dispose of or transfer the  
camcorder, it is recommended that you  
perform [EMPTY].  
When the internal recording media is  
selected on the [MEDIA FORMAT] screen,  
touch [EMPTY].  
Notes  
Connect the AC Adaptor to the wall outlet (wall  
socket). You cannot perform [EMPTY] unless  
you connect the AC Adaptor to the wall outlet  
(wall socket).  
To avoid the loss of important images, they  
should be saved on a computer or other devices  
before performing [EMPTY].  
Disconnect all cables except the AC Adaptor.  
Do not disconnect the AC Adaptor during the  
operation.  
While deleting data, do not apply any vibrations  
GB  
ꢁ5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
GENERAL SET  
(Other setup items)  
to the camcorder body, the setting becomes  
[NORMAL] automatically.  
See “Using menus” (p. 58) on the operation.  
The default settings are marked with .  
Tips  
This adjustment does not affect the recorded  
images in any way.  
SOUND/DISP SET  
VOLUME  
LCD COLOR  
You can adjust the volume of playback  
You can adjust the color of the LCD screen  
sound by touching  
/
.
by touching  
/
.
BEEP  
Tips  
This adjustment does not affect the recorded  
images in any way.  
ON  
A melody sounds when you start/stop  
recording, or operate the touch panel.  
DISPLAY SET  
You can set the duration of displaying the  
icons or indicators on the LCD screen.  
OFF  
Cancels the melody.  
AUTO1  
Displays for about 3 seconds. The rec & zoom  
buttons on the LCD is displayed.  
LCD BRIGHT  
You can adjust the brightness of the LCD  
screen by touching  
/
.
AUTO2  
Displays for about 3 seconds. The rec & zoom  
buttons on the LCD is not displayed.  
Tips  
This adjustment does not affect the recorded  
images in any way.  
ON  
Always displays. The rec & zoom buttons on  
the LCD is not displayed.  
LCD BL LEVEL (LCD backlight level)  
You can select the brightness of the LCD  
screen’s backlight.  
Tips  
The icons or indicators are displayed in the  
following cases.  
When you turn on your camcorder.  
The LCD screen is touched (Except rec &  
zoom buttons on LCD).  
When you switch your camcorder to the  
movie recording, photo recording, or  
playback modes.  
NORMAL  
Standard brightness.  
BRIGHT  
Brightens the LCD screen.  
Notes  
When you connect your camcorder to the wall  
outlet (wall socket) using the supplied AC  
Adaptor, [BRIGHT] is automatically selected  
for the setting.  
When you select [BRIGHT], battery life is  
slightly reduced during recording.  
If you open the LCD panel 180 degrees to face  
the screen outside and close the LCD panel  
GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
576i  
OUTPUT SETTINGS  
Select this when connecting your  
camcorder to a TV with the component  
input jack.  
TV TYPE  
You need to convert the signal depending  
on the TV connected when playing back  
movies and photos. The recorded movies  
and photos are played back as following  
illustrations.  
1080i/576i  
Select this when connecting your  
camcorder to a TV that has the component  
input jack and is capable of displaying the  
1080i signal.  
16:9  
HDMI RESOLUTION  
Select this to view your movies on a 16:9  
(wide) TV. The recorded movies and photos  
are played back as shown below.  
Select the output image resolution when  
connecting your camcorder to a TV with an  
HDMI cable (sold separately).  
Movies and photos Movies and photos  
recorded in 16:9 recorded in 4:3 mode  
(wide) mode  
HD CONTENTS  
Set the output image resolution recorded with  
high definition image quality (HD).  
AUTO  
Normal setting (outputs the signal according  
to the TV automatically).  
4:3  
Select this to view your movies and photos on  
a 4:3 standard TV. The recorded movies and  
photos are played back as shown below.  
1080p  
Outputs the 1080p signal.  
1080i  
Outputs the 1080i signal.  
Movies and photos Movies and photos  
recorded in 16:9 recorded in 4:3 mode  
(wide) mode  
720p  
Outputs the 720p signal.  
576p  
Outputs the 576p signal.  
Notes  
Horizontal to vertical ratio of high definition  
image quality (HD) movies is 16:9.  
COMPONENT  
Select [COMPONENT] when connecting  
your camcorder to a TV with the  
component input jack.  
GB  
ꢁꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
STD CONTENTS  
Set the output image resolution recorded with  
standard definition image quality (STD).  
OFF  
Does not set the summertime.  
ON  
AUTO  
Sets the summertime.  
Normal setting (outputs the signal according  
to the TV automatically).  
LANGUAGE SET  
You can select the language to be used on  
the LCD screen.  
576p  
Outputs the 576p signal.  
576i  
Tips  
Outputs the 576i signal.  
Your camcorder offers [ENG[SIMP]]  
(simplified English) for when you cannot find  
your native tongue among the options.  
DISP OUTPUT (Display output)  
You can set where the screen displays are to  
be output.  
POWER SETTINGS  
LCD PANEL  
Shows displays such as the time code on the  
LCD screen.  
A.SHUT OFF (Auto shut off)  
You can set your camcorder to turn off  
automatically when you do not operate  
your camcorder for more than about 5  
minutes.  
V-OUT/PANEL  
Shows displays such as the time code on the  
LCD screen, and on the TV screen.  
5min  
The camcorder turns off automatically.  
CLOCK/ LANG  
NEVER  
The camcorder does not turn off  
automatically.  
CLOCK SET  
See page 15.  
Notes  
AREA SET  
When you connect your camcorder to a  
wall outlet (wall socket), [A.SHUT OFF] is  
automatically set to [NEVER].  
You can adjust a time difference without  
stopping the clock. Set your local area when  
using your camcorder in other time zones.  
Refer to the world time difference on page  
POWER ON BY LCD  
You can set your camcorder to turn on  
and off when you open and close the LCD  
screen.  
SUMMERTIME  
You can change this setting without  
stopping the clock. Set to [ON] to move the  
time forward 1 hour.  
ON  
The camcorder turns on and off when the  
LCD screen opens and closes.  
G8B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
DROP SENSOR (HDR-XR150E/  
OFF  
The camcorder does not turn on and off when  
the LCD screen opens and closes.  
XR155E)  
Your camcorder detects that it is dropping,  
and protects the internal hard disk.  
OTHER SETTINGS  
ON  
Activates the drop sensor. When it is detected  
that the camcorder is dropping, you may  
not be able to record or play back images  
correctly, to protect the internal hard disk.  
DEMO MODE  
When your camcorder is connected to a  
wall outlet (wall socket), a demonstration  
movie appear about 10 minutes after you  
turn on the (Movie) lamp by pressing  
MODE.  
When dropping is detected,  
appears.  
OFF (  
)
Deactivates the drop sensor.  
ON  
Notes  
The demonstration appears.  
Set the drop sensor to [ON] when you use  
the camcorder. Otherwise, if you drop the  
camcorder, you may damage the internal hard  
disk.  
OFF  
The demonstration does not appear.  
In a non-gravity situation, the drop sensor  
activates. When you record images during an  
activity such as roller-coasting or skydiving, you  
can set [DROP SENSOR] to [OFF] so as not to  
activate the drop sensor.  
Notes  
A movie you have recorded will be registered as  
the demonstration movie if it satisfies all of the  
following conditions (HDR-CX116E/CX150E/  
CX155E/XR150E/XR155E).  
The movie is protected  
The movie is the first one displayed on the  
VISUAL INDEX screen  
The movie is saved on the internal recording  
media  
The movie is recorded with high definition  
image quality (HD)  
CTRL FOR HDMI (Control for HDMI)  
When connecting your camcorder to a  
“BRAVIASync compatible TV with the  
HDMI cable (sold separately), you can play  
back movies on your camcorder by aiming  
the TVs Remote Commander at the TV  
Tips  
When you set this item to [ON] and touch  
, the demonstration starts playing.  
The demonstration will be suspended:  
When you press START/STOP or PHOTO  
When you touch the screen during the  
demonstration (The demonstration starts  
again after about 10 minutes)  
ON  
Operates your camcorder using the TVs  
Remote Commander.  
OFF  
Does not operate your camcorder using the  
TVs Remote Commander.  
When you turn on the  
(Photo) lamp  
When you press  
(VIEW IMAGES)  
CALIBRATION  
See page 99.  
GB  
ꢁ9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Additional information  
Troubleshooting  
If you run into any problems using your  
camcorder, follow the steps below.  
Playback on the TV ........................................p. 85  
Dubbing/Connecting to other devices.........p. 85  
Connecting to a Computer............................p. 85  
Examples of functions that cannot be used  
simultaneously.................................................p. 86  
Check the list (p. 80 to 89), and  
inspect your camcorder.  
Overall operations  
Disconnect the power source, attach  
the power source again after about 1  
minute, and turn the camcorder on.  
The power does not turn on.  
Attach a charged battery pack to the  
camcorder (p. 12).  
The plug of the AC Adaptor has been  
disconnected from the wall outlet (wall  
socket). Connect it to the wall outlet (wall  
socket) (p. 12).  
Press RESET (p. 105) using a pointed  
object, and turn the camcorder on.  
If you press RESET, all settings,  
including the clock setting, are reset.  
The camcorder does not operate even  
when the power is set to on.  
Contact your Sony dealer or local  
It takes a few seconds for your camcorder to  
be ready to shoot after the power is turned on.  
This is not a malfunction.  
authorized Sony service facility.  
Your camcorder may be required to initialize or  
change the current internal recording media of  
your camcorder, depending on the problem. In  
the event of this, the data stored on the internal  
recording media will be deleted. Be sure to  
save the data on the internal recording media  
on other media (backup) before sending your  
camcorder for repair. We will not compensate  
you for any loss of internal recording media  
data.  
During repair, we may check a minimum  
amount of data stored on the internal recording  
media in order to investigate the problem.  
However, your Sony dealer will neither copy  
nor retain your data.  
Disconnect the AC Adaptor from the wall  
outlet (wall socket) or remove the battery  
pack, then reconnect it after about 1 minute.  
If the functions still do not work, press RESET  
(p. 105) using a pointed object. (If you press  
RESET, all settings, including the clock setting,  
are reset.)  
The temperature of your camcorder is  
extremely high. Turn off your camcorder and  
leave it for a while in a cool place.  
The temperature of your camcorder is  
extremely low. Leave your camcorder with the  
power of your camcorder on. Turn off your  
camcorder and take it to a warm place. Leave  
the camcorder there for a while, then turn on  
your camcorder.  
Overall operations ..........................................p. 80  
Batteries/power sources ................................p. 81  
LCD screen ......................................................p. 81  
Memory card ...................................................p. 82  
Recording.........................................................p. 82  
Playback ...........................................................p. 83  
Playing back images stored on memory card on  
other devices....................................................p. 84  
The menu settings have changed  
automatically.  
The following menu items return to the  
default settings in more than 12 hours after  
you close the LCD screen.  
[SCENE SELECTION]  
8G0B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
[WHITE BAL.]  
[SPOT MTR/FCS]  
[SPOT METER]  
The CHG (charge) lamp flashes while the  
battery pack is being charged.  
[SPOT FOCUS]  
[EXPOSURE]  
[FOCUS]  
[LOW LUX]  
[BLT-IN ZOOM MIC]  
[MICREF LEVEL]  
[AUTO BACK LIGHT]  
[DROP SENSOR] (HDR-XR150E/XR155E)  
The following menu items return to the  
default settings when you switch between  
movie recording and photo recording and  
playback modes.  
[ FADER]  
[TELE MACRO]  
[ SELF-TIMER]  
If the temperature of the battery pack is too  
high or too low, you may not be able to charge  
it (p. 97).  
Attach the battery pack to the camcorder  
correctly (p. 12). If the problem persists,  
disconnect the AC Adaptor from the wall  
outlet (wall socket) and contact your Sony  
dealer. The battery pack may be damaged.  
The remaining battery time indicator does  
not indicate the correct time.  
The ambient temperature is too high or too  
low. This is not a malfunction.  
The battery pack has not been charged  
enough. Fully charge the battery again. If the  
problem persists, replace the battery pack with  
a new one (p. 98).  
Your camcorder gets warm.  
Your camcorder may become warm during  
operation. This is not a malfunction.  
The indicated time may not be correct  
depending on the environment of use.  
The battery pack is quickly discharged.  
Batteries/power sources  
The power abruptly turns off.  
The ambient temperature is too high or low.  
This is not a malfunction.  
The battery pack has not been charged  
enough. Fully charge the battery again. If the  
problem persists, replace the battery pack with  
a new one (p. 98).  
Use the AC Adaptor.  
In the default setting, when about 5 minutes  
have elapsed while you do not operate your  
camcorder, the camcorder is automatically  
turned off (A.SHUT OFF). Change the setting  
of [A.SHUT OFF] (p. 78), or turn on the  
power again.  
LCD screen  
Charge the battery pack (p. 12).  
Menu items are grayed out.  
You cannot select grayed items in the current  
recording/playback situation.  
There are some functions you cannot activate  
simultaneously (p. 86).  
The CHG (charge) lamp does not light  
while the battery pack is being charged.  
Close the LCD screen (p. 12).  
Attach the battery pack to the camcorder  
correctly (p. 12).  
Connect the power cord (mains lead) to the  
wall outlet (wall socket) properly.  
The battery charge is completed (p. 12).  
The buttons do not appear on the touch  
panel.  
Touch the LCD screen lightly.  
GB  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
The recording media is full. Delete  
unnecessary images (p. 40).  
Total number of movie scenes or photos  
exceeds the recordable capacity of your  
The buttons on the touch panel do not  
work correctly or do not work at all.  
Adjust the touch panel ([CALIBRATION])  
camcorder (p. 90, 92). Delete unnecessary  
images (p. 40).  
While [DROP SENSOR] is activated (p. 79),  
you may not record images. (HDR-XR150E/  
XR155E)  
The temperature of your camcorder is  
extremely high. Turn off your camcorder and  
leave it for a while in a cool place.  
The buttons on the touch panel quickly  
disappear.  
Set [DISPLAY SET] to [ON] (p. 76).  
Memory card  
The temperature of your camcorder is  
extremely low. Turn off your camcorder and  
take it to a warm place. Leave the camcorder  
there for a while, then turn on the camcorder.  
Operations using the memory card  
cannot be performed.  
If you use the memory card formatted on a  
computer, format it again on your camcorder  
Photos cannot be recorded.  
You cannot record photos together with:  
[ FADER]  
[SMTH SLW REC]  
When [ REC MODE] is set to [HD FX], you  
cannot record photos while recording movies.  
Images stored on the memory card  
cannot be deleted.  
The maximum number of images that you can  
delete on the index screen at one time is 100.  
You cannot delete the protected images.  
The access lamp remains lit or flashing  
even if recording was stopped.  
The data file name is not indicated  
correctly or flashes.  
Your camcorder is recording the scene you  
have just shot on the memory card.  
The file is damaged.  
The file format is not supported by your  
camcorder (p. 96).  
The imaging field looks different.  
The imaging field may look different  
depending on the condition of your  
camcorder. This is not a malfunction.  
Recording  
Refer also to “Memory card” (p. 82).  
The actual recording time for movies is  
less than the expected recording time of  
the recording media.  
Pressing START/STOP or PHOTO does not  
record images.  
Depending on the recording conditions, the  
time available for recording may be shorter, for  
example when recording a fast moving object,  
etc. (p. 90).  
The playback screen is displayed. Press MODE  
to turn on the  
(Movie) or (Photo) lamp  
Your camcorder is recording the image you  
have just shot on the recording media. You  
cannot make new recording during this  
period.  
8G2B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
The camcorder stops operating.  
The subjects passing by the screen very  
fast appear crooked.  
The temperature of your camcorder is  
extremely high. Turn off your camcorder and  
leave it for a while in a cool place.  
The temperature of your camcorder is  
extremely low. Turn off your camcorder and  
take it to a warm place. Leave the camcorder  
there for a while, then turn on the camcorder.  
If you keep applying vibration on the  
camcorder, recording may stop.  
This is called the focal plane phenomenon.  
This is not a malfunction. Because of the way  
the image device (CMOS sensor) reads out  
image signals, the subjects passing by the lens  
rapidly might appear crooked depending on  
the recording conditions.  
Horizontal stripes appear on the images.  
This occurs when recording images under a  
fluorescent lamp, sodium lamp, or mercury  
lamp. This is not a malfunction.  
There is a time difference between the  
point when START/STOP is pressed and  
the point that the recording movie is  
started or stopped actually.  
Black bands appear when you record a TV  
screen or computer screen.  
On your camcorder, there may be a slight  
time difference between the point where you  
press START/STOP and the actual point that  
recording movie starts/stops. This is not a  
malfunction.  
Set [ STEADYSHOT] to [OFF] (p. 68).  
[LCD BL LEVEL] cannot be adjusted.  
You cannot adjust [LCD BL LEVEL] when:  
The LCD panel is closed on your camcorder  
with the LCD screen facing out.  
The horizontal to vertical ratio of the  
movie (16:9 (wide)/4:3) cannot be  
changed.  
The power is supplied from the AC Adaptor.  
The horizontal to vertical ratio of high  
definition image quality (HD) movies is 16:9  
(wide).  
Magnification changes when the  
recording mode is switched.  
You cannot use digital zoom when your  
camcorder is in the photo recording mode.  
The auto focus does not function.  
Set [FOCUS] to [AUTO] (p. 66).  
The recording conditions are not suitable for  
auto focus. Adjust the focus manually (p. 66).  
Playback  
Images cannot be played back.  
SteadyShot does not function.  
Select the type of recording media you want  
to play back (p. 17). (HDR-CX116E/CX150E/  
CX155E/XR150E/XR155E)  
Select the image quality of the movie you want  
to play back (p. 26).  
Images recorded on other devices may not be  
played back. This is not a malfunction.  
Set [ STEADYSHOT] to [ACTIVE] or  
[STANDARD] (p. 68).  
Even if [ STEADYSHOT] is set to  
[ACTIVE] or [STANDARD], your camcorder  
may not be able to compensate for excessive  
vibrations.  
GB  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Photos cannot be played back.  
A movie is played back automatically.  
(HDR-CX116E/CX150E/CX155E/XR150E/  
XR155E)  
Photos cannot be played back if you have  
modified files or folders, or have edited the  
data on a computer. (The file name flashes in  
that case.) This is not a malfunction.  
Movies play automatically as a demonstration  
movie when the filmed movie fulfills a certain  
condition on your camcorder (p. 79). This is  
not a malfunction.  
is indicated on an image on the  
VISUAL INDEX screen.  
This may appear on an image recorded on  
other devices, edited on a computer, etc.  
You removed the AC Adaptor or the battery  
pack while the recording media icon at the top  
right corner of the screen flashes, or before  
the access lamp is turned off after recording.  
Playing back images stored on  
memory card on other devices  
Images cannot be played back or the  
memory card is not recognized.  
This may damage your image data and  
displayed.  
is  
The playback device does not support playing  
back memory cards (p. 3).  
is indicated on an image on the  
VISUAL INDEX screen.  
Editing movies/photos on your  
camcorder  
The image data base file may be damaged.  
Check the data base file by touching  
(MENU) [Show others] [REPAIR  
Unable to edit.  
IMG.DB F.] (under  
[MANAGE MEDIA]  
Unable to edit because of the condition of the  
image.  
category) the recording medium (HDR-  
CX116E/CX150E/CX155E/XR150E/XR155E).  
If it still appears, delete the image with  
Movies cannot be added in the Playlist.  
There is no free space in the recording media.  
You can add no more than 999 high definition  
image quality (HD) movies, or 99 standard  
definition image quality (STD) movies, to a  
Playlist. Erase unnecessary movies from the  
Playlist (p. 47).  
No sound or only a quiet sound is heard  
during playback.  
Turn up the volume (p. 31).  
Sound is quiet when the LCD screen is closed  
facing out. Open the LCD screen.  
When you record sound with [MICREF  
LEVEL] (p. 69) set to [LOW], the recorded  
sound may be difficult to hear.  
Sounds cannot be recorded while shooting  
with [SMTH SLW REC].  
You cannot add photos in the Playlist.  
A movie cannot be divided.  
A movie that is too short cannot be divided.  
A protected movie cannot be divided.  
A photo cannot be captured from a  
movie.  
The recording media where you want to save  
photos is full.  
8G4B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Playback on the TV  
Black bands appear at the top and bottom  
of the screen of the 4:3 TV.  
This happens when viewing an image recorded  
in the 16:9 (wide) mode on a 4:3 TV. This is  
not a malfunction.  
Neither image nor sound is played on the  
connected TV.  
When you are using the component A/V  
cable, set [COMPONENT] according to the  
requirements of the connected device (p. 77).  
When you are using the component video  
plug, make sure the red and white plugs of the  
A/V connecting cable are connected (p. 38).  
Images are not output from the HDMI OUT  
jack, if copyright protection signals are  
recorded in the images.  
Dubbing/Connecting to other  
devices  
Images are not dubbed correctly.  
You cannot dub images using the HDMI cable  
(sold separately).  
When you are using the S VIDEO plug,  
make sure the red and white plugs of the A/V  
connecting cable are connected (p. 39).  
The A/V connecting cable is not connected  
properly. Make sure to connect the cable to the  
input jack of another device (p. 56).  
The top, bottom, right, and left edges  
of images are trimmed slightly on a  
connected TV.  
Connecting to a Computer  
“PMBcannot be installed.  
The LCD screen of your camcorder can  
display recording images across the entire  
screen (full pixel display). However, this may  
cause slight trimming of the top, bottom, right,  
and left edges of images when played back on  
a TV which is not compatible with full pixel  
display.  
It is recommended you record images using  
the outer frame of [GUIDEFRAME] (p. 67)  
as a guide.  
Check the computer environment or  
installation procedure required to install  
“PMB.  
“PMBdoes not work correctly.  
Quit “PMB” and restart your computer.  
The camcorder is not recognized by the  
computer.  
Disconnect devices from the USB jack of the  
computer other than the keyboard, mouse,  
and your camcorder.  
Disconnect the USB cable from the computer  
and your camcorder, and restart the computer,  
then connect the computer and your  
camcorder again in the correct order.  
The image appears distorted on the 4:3  
TV.  
This happens when viewing an image  
recorded in the 16:9 (wide) mode on a 4:3 TV.  
Set [TV TYPE] correctly (p. 77) and play back  
the image.  
GB  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Examples of functions that cannot  
be used simultaneously  
Self-diagnosis display/Warning  
indicators  
The following list shows examples of  
unworkable combinations of functions and  
menu items.  
If indicators appear on the LCD screen,  
check the following.  
If the problem persists even after you  
have tried to fix a couple of times, contact  
your Sony dealer or local authorized Sony  
service facility. In this case, when you  
contact them, give them all the numbers of  
the error code beginning with C or E.  
Cannot use  
Because of following settings  
INTELLIGENT  
AUTO  
[SMTH SLW REC]  
[FACE  
DETECTION]  
[SMTH SLW REC],  
[
DIGITAL ZOOM],  
[SPOT MTR/FCS],  
[SPOT METER], [SPOT  
FOCUS], [EXPOSURE],  
[FOCUS], [TWILIGHT],  
[SUNRISE&SUNSET],  
[FIREWORKS],  
[LANDSCAPE],  
[SPOTLIGHT], [BEACH],  
[SNOW], [WHITE BAL.],  
C:(or E:) :(Self-diagnosis display)  
[
FADER], [ SELF-  
C:04:  
  
TIMER]  
[SMTH SLW REC],  
The battery pack is not an “InfoLITHIUM”  
battery pack (V series). Use an  
“InfoLITHIUM” battery pack (V series)  
Connect the DC plug of the AC Adaptor to the  
DC IN jack of your camcorder securely (p. 12).  
[PRIORITY  
SETTING]/  
[SMILE  
DETECTION]/  
[SMILE  
SENSITIVITY]  
[
DIGITAL ZOOM],  
[SPOT MTR/FCS],  
[SPOT METER], [SPOT  
FOCUS], [EXPOSURE],  
[FOCUS], [TWILIGHT],  
[SUNRISE&SUNSET],  
[FIREWORKS],  
C:06:  
  
The battery pack temperature is high. Change  
the battery pack or place it in a cool place.  
[LANDSCAPE],  
[SPOTLIGHT], [BEACH],  
[SNOW], [WHITE BAL.],  
C:13:  
/ C:32:  
  
  
Remove the power source. Reconnect it and  
operate your camcorder again.  
[
FADER], [ SELF-  
TIMER]  
[SCENE  
SELECTION]  
[SMTH SLW REC], [LOW  
LUX], [ FADER], [TELE  
MACRO]  
E:  
:
  
Follow the steps from to on page 80.  
(Warning on the internal hard disk of  
the camcorder)  
Fast flashing  
The internal hard disk of the camcorder is full.  
An error may have occurred with the internal  
hard disk of the camcorder.  
8GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
The image data base file may be damaged.  
Check the data base file by touching  
(Battery level warning)  
(MENU) [Show others] [REPAIR  
Slow flashing  
The battery pack is nearly used up.  
Depending on the operating environment or  
battery conditions,  
are about 20 minutes remaining.  
IMG.DB F.] (under  
[MANAGE MEDIA]  
category) the recording medium (HDR-  
CX116E/CX150E/CX155E/XR150E/XR155E).  
The memory card is damaged.  
may flash, even if there  
(Warning indicators pertaining to  
memory card formatting)  
(Warning indicator pertaining to  
battery pack temperature)  
The memory card is damaged.  
The memory card is not formatted correctly  
The battery pack temperature is high. Change  
the battery pack or place it in a cool place.  
(High temperature warning)  
(Warning indicator pertaining to  
incompatible memory card)  
Slow flashing  
The temperature of your camcorder is getting  
higher. Turn off your camcorder and leave it  
for a while in a cool place.  
Incompatible memory card is inserted (p. 18).  
(Warning indicator pertaining to  
the write-protect of the memory card)  
Fast flashing  
The temperature of your camcorder is  
extremely high. Turn off your camcorder and  
leave it for a while in a cool place.  
Access to the memory card was restricted on  
another device.  
(Warning indicator pertaining to  
camera-shake warning)  
(Low temperature warning)  
Fast flashing  
The temperature of your camcorder is  
extremely low. Make the camcorder warm.  
The camcorder is unsteady, so camera-shake  
easily occurs. Hold the camcorder steady with  
both hands and record the image. However,  
note that the camera-shake warning indicator  
does not disappear.  
(Warning indicator pertaining to  
memory card)  
(Warning indicator pertaining to drop  
sensor)  
Slow flashing  
Free spaces for recording images are running  
out. For the type of memory card you can use  
with your camcorder, see page 18.  
No memory card is inserted (p. 18).  
The drop sensor function (p. 79) is activated,  
and has detected that the camcorder has  
been dropped. Therefore, the camcorder is  
taking steps to protect the internal hard disk.  
Recording/playback may be disabled as a  
result.  
The drop sensor function does not guarantee  
the protection of the internal hard disk under  
all possible situations. Use the camcorder  
under stable conditions.  
Fast flashing  
There are not enough free spaces for recording  
images. After storing the images on other  
media (p. 49), delete unnecessary images, or  
format the memory card (p. 74).  
GB  
8ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Image Database File is damaged. Do  
you want to create a new file?  
HD movie management information is  
damaged. Create new information?  
(Warning indicator pertaining to  
photo recording)  
The recording media is full.  
Photos cannot be recorded during processing.  
Wait for a while, then record.  
When [ REC MODE] is set to [HD FX], you  
cannot record photos while recording movies.  
The management file is damaged. When  
you touch [YES], a new management file  
is created. The old recorded images on the  
media cannot be played back (Image files are  
not damaged). If you execute [REPAIR IMG.  
DB F.] after creating new information, playing  
back the old recorded images may become  
possible. If it does not work, copy the image  
using the supplied software.  
(Warning indicator pertaining to smile  
shutter)  
The smile shutter cannot be used with the  
current setting of the camcorder.  
There is no HD movie management  
information. Create new information?  
Tips  
You may hear a melody when some warning  
indicators appear on the screen.  
You cannot record or play back movies  
because no high definition image quality (HD)  
movie management information exists. If you  
touch [YES], new management information  
is created and you can record or play back  
movies with high definition image quality  
(HD).  
Description of warning messages  
If messages appear on the screen, follow the  
instructions.  
You can record standard definition image  
quality (STD) movies or photos.  
Recording media  
Internal memory format error.  
HDD format error.  
Inconsistencies found in Image Database  
File. Do you want to repair the Image  
Database File?  
The Image Database File is damaged. Do  
you want to repair the Image Database  
File?  
Inconsistencies found in Image Database  
File. Cannot record or play HD movies. Do  
you want to repair the Image Database  
File?  
The internal recording media of the  
camcorder is set differently from the default  
format. Performing [MEDIA FORMAT]  
(p. 74) may enable you to use your camcorder.  
This will delete all data in the internal  
recording media.  
Data error.  
An error occurred during reading or writing  
the internal recording media of the camcorder.  
This may occur when you keep applying shock  
on the camcorder.  
Movies recorded on other devices may not be  
played back.  
The management file is damaged, and you  
cannot record movies or photos. Touch [YES]  
to repair.  
You can record photos on a memory card.  
8G8B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Buffer overflow  
This memory card may not be able to  
record or play images correctly.  
You cannot record because the drop sensor  
senses a drop of the camcorder repeatedly.  
If you are at risk of dropping the camcorder  
constantly, set [DROP SENSOR] to [OFF],  
and you may be able to record the image again  
Use a memory card recommended for your  
camcorder (p. 18).  
Do not eject the memory card during  
writing. Data may be damaged.  
Reinsert the memory card, and follow the  
instructions on the LCD screen.  
Recovering data.  
Your camcorder tries to recover data  
automatically if the data writing was not  
performed properly.  
Other  
Cannot recover data.  
Writing data onto the media of the camcorder  
has failed. Attempts were made to recover the  
data, but they were unsuccessful.  
No further selection is possible.  
You can select only 100 images at one time for:  
Deleting movies/photos  
Protecting movies/photos, or releasing the  
protection  
Reinsert the memory card.  
Dubbing movies  
Copying photos  
Editing the Playlist of high definition image  
quality (HD) movies  
Reinsert the memory card a few times. If even  
then the indicator flashes, the memory card  
could be damaged. Try with another memory  
card.  
Data protected.  
This memory card is not formatted  
correctly.  
You tried to delete protected data. Release the  
protection of the data.  
Format the memory card (p. 74). Note that if  
you format the memory card, all the recorded  
movies and photos are deleted.  
Still picture folder is full. Cannot record  
still pictures.  
You cannot create folders exceeding  
999MSDCF. You cannot create or delete  
created folders using your camcorder.  
Format the memory card (p. 74), or delete  
folders using your computer.  
This memory card may not be able to  
record or play movies.  
Use a memory card recommended for your  
camcorder (p. 18).  
GB  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Recording time of  
movies/number of  
recordable photos  
“HD” stands for high definition image  
quality, and “STD” stands for standard  
image quality.  
temperatures.  
The recording and playback time will be shorter  
depending on the conditions under which you  
use your camcorder.  
Playing time  
Approximate time available when you use a  
fully charged battery pack.  
Expected time of recording and  
playback with each battery pack  
HDR-CX110E/CX115E/CX116E/  
CX150E/CX155E  
(unit: minute)  
Recording time  
Approximate time available when you use a  
fully charged battery pack.  
Battery pack  
HDR-CX110E/CX115E/CX116E/  
CX150E/CX155E  
Image quality  
NP-FV50  
(supplied)  
HD  
190  
STD  
280  
(unit: minute)  
NP-FV70  
NP-FV100  
395  
785  
565  
1120  
Battery pack  
Continuous  
recording time  
Typical recording  
time  
Image quality  
HD STD  
HD STD  
NP-FV50  
(supplied)  
NP-FV70  
125  
180  
60  
90  
HDR-XR150E/XR155E  
(unit: minute)  
260  
515  
375  
745  
130  
255  
185  
370  
Battery pack  
NP-FV100  
Image quality  
NP-FV50  
(supplied)  
NP-FV70  
NP-FV100  
HD  
170  
STD  
225  
HDR-XR150E/XR155E  
(unit: minute)  
Typical recording  
time  
355  
710  
465  
925  
Battery pack  
Continuous  
recording time  
Image quality  
HD STD  
HD STD  
NP-FV50  
(supplied)  
110  
155  
55  
75  
Expected recording time of movies  
NP-FV70  
NP-FV100  
235  
470  
325  
650  
115  
235  
160  
325  
Internal memory  
HDR-CX116E  
Each recording time is measured when the  
REC MODE] is set to HQ.  
Typical recording time shows the time when  
you repeat recording start/stop, switching the  
MODE lamp, and zooming.  
Times measured when using the camcorder at  
25 C (77 °F). 10 C to 30 C (50 °F to 86 °F) is  
recommended.  
The recording and playback time will be  
shorter when you use your camcorder in low  
High definition image quality (HD) in h (hour) and m  
(minute)  
[
Recording mode  
[HD FX]  
[HD FH]  
[HD HQ]  
[HD LP]  
Recording time  
45 m  
55 m  
1 h 55 m  
3 h 15 m  
9G0B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Tips  
Standard definition image quality (STD) in h (hour) and  
m (minute)  
You can record movies of a maximum of 3,999  
scenes with high definition image quality (HD),  
and 9,999 scenes with standard definition image  
quality (STD).  
Recording mode  
Recording time  
[STD HQ]  
2 h  
The maximum continuous recording time of  
movies is approximately 13 hours.  
HDR-CX150E/CX155E  
Your camcorder uses the VBR (Variable Bit  
Rate) format to automatically adjust image  
quality to suit the recording scene. This  
technology causes fluctuations in the recording  
time of the media. Movies containing quickly  
moving and complex images are recorded at  
a higher bit-rate, and this reduces the overall  
recording time.  
High definition image quality (HD) in h (hour) and m  
(minute)  
Recording mode  
[HD FX]  
[HD FH]  
[HD HQ]  
[HD LP]  
Recording time  
1 h 25 m  
1 h 55 m  
3 h 50 m  
6 h 35 m  
Memory card  
Standard definition image quality (STD) in h (hour) and  
m (minute)  
High definition image quality (HD)  
(unit: minute)  
Recording mode  
Recording time  
3 h 55 m  
AVC HD  
AVC HD AVC HD 9M AVC HD 5M  
[STD HQ]  
24M (FX) 17M (FH)  
(HQ)  
(LP)  
1GB  
2GB  
4GB  
8GB  
16GB  
32GB  
5
6
10  
20  
(5)  
(6)  
(9)  
(15)  
Internal hard disk  
10  
(10)  
20  
(20)  
40  
(40)  
85  
(85)  
10  
(10)  
25  
(25)  
55  
(55)  
115  
(115)  
25  
(20)  
55  
(40)  
115  
(80)  
230  
(165)  
45  
(35)  
95  
(75)  
195  
(155)  
395  
(315)  
HDR-XR150E/XR155E  
High definition image quality (HD) in h (hour) and m  
(minute)  
Recording mode  
[HD FX]  
[HD FH]  
[HD HQ]  
[HD LP]  
Recording time  
11 h 20 m  
14 h 50 m  
29 h 40 m  
50 h 30 m  
175  
(175)  
230  
(230)  
465  
(335)  
790  
(630)  
Standard definition image quality (STD) in h (hour) and  
m (minute)  
Recording mode  
Recording time  
30 h 30 m  
[STD HQ]  
GB  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The number of recordable photos of memory  
card shown is for the maximum image size  
of your camcorder. The actual number of  
recordable photos is displayed on the LCD  
screen during recording (p. 103).  
The number of recordable photos of memory  
card may vary depending on the recording  
conditions.  
Standard definition image quality (STD)  
(unit: minute)  
STD 9M (HQ)  
1GB  
2GB  
4GB  
8GB  
16GB  
32GB  
10  
(10)  
25  
(25)  
55  
(50)  
115  
(105)  
235  
(210)  
Notes  
The unique pixel array of Sony’s ClearVid and  
the image processing system (BIONZ) allow  
still image resolution equivalent to the sizes  
described.  
Tips  
475  
(425)  
You can also use memory card with a capacity  
of under 1 GB for recording photos.  
The following list shows the bit-rate, pixels and  
aspect ratio of each recording mode (movie +  
audio, etc.).  
High definition image quality (HD):  
FX: Max. 24Mbps 1,920 1,080 pixels/16:9  
FH: Approx. 17Mbps (average) 1,920 1,080  
pixels/16:9  
Notes  
The recordable time may vary depending on the  
recording and subject conditions and [ REC  
MODE] (p. 26).  
The number in ( ) is the minimum recordable  
time.  
HQ: Approx. 9Mbps (average) 1,440 1,080  
pixels/16:9  
LP: Approx. 5Mbps (average) 1,440 1,080  
pixels/16:9  
Standard definition image quality (STD):  
HQ: Approx. 9Mbps (average) 720 576  
pixels/16:9, 4:3  
Expected number of recordable  
photos  
Internal recording media (HDR-CX116E/  
CX150E/CX155E/XR150E/XR155E)  
You can record the maximum 9,999 photos.  
The photo recording pixels and the aspect ratio.  
Photo recording mode:  
Memory card  
2,048 1,536 dots/4:3  
2,048 1,152 dots/16:9  
3.1M  
1,600 1,200 dots/4:3  
640 480 dots/4:3  
Dual recording:  
2,208 1,244 dots/16:9  
1,664 1,244 dots/4:3  
Capturing a photo from a movie:  
1,920 1,080 dots/16:9  
1GB  
2GB  
4GB  
8GB  
16GB  
32GB  
580  
1150  
2350  
4800  
9600  
19000  
640 360 dots/16:9  
640 480 dots/4:3  
The selected image size is effective when the  
(Photo) lamp is lit.  
9G2B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using your camcorder  
abroad  
Power supply  
On TV color systems  
You can use your camcorder in any  
Your camcorder is a PAL-system-based  
camcorder. If you want to view the playback  
image on a TV, it must be a PAL-system-  
based TV with an AUDIO/VIDEO input  
jack.  
countries/regions using the AC Adaptor  
supplied with your camcorder within the  
AC 100 V to 240 V, 50 Hz/60 Hz range.  
Viewing high definition image quality  
(HD) movies  
System  
Used in  
PAL  
Australia, Austria, Belgium,  
China, Czech Republic,  
In countries/regions where 1080/50i is  
supported, you can view the movies with  
the same high definition image quality  
(HD) as that of the recorded movies.  
You need an PAL-system-based and  
1080/50i compatible TV (or monitor) with  
component and AUDIO/VIDEO input  
jacks. A component A/V cable or an HDMI  
cable (sold separately) must be connected.  
Denmark, Finland, Germany,  
Holland, Hong Kong, Hungary,  
Italy, Kuwait, Malaysia, New  
Zealand, Norway, Poland,  
Portugal, Singapore, Slovak  
Republic, Spain, Sweden,  
Switzerland, Thailand, United  
Kingdom, etc.  
PAL-M  
PAL-N  
NTSC  
Brazil  
Argentina, Paraguay, Uruguay  
Viewing standard definition image  
quality (STD) movies  
Bahama Islands, Bolivia,  
Canada, Central America,  
Chile, Colombia, Ecuador,  
Guyana, Jamaica, Japan,  
Korea, Mexico, Peru, Surinam,  
Taiwan, the Philippines, the  
USA, Venezuela, etc.  
Bulgaria, France, Guiana, Iran,  
Iraq, Monaco, Russia, Ukraine,  
etc.  
To view standard definition image quality  
(STD) movies, you need a PAL-system-  
based TV with AUDIO/VIDEO input  
jacks. An A/V connecting cable must be  
connected.  
SECAM  
GB  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting to the local time  
You can easily set the clock to the local time by setting a time difference when using your  
camcorder abroad. Touch  
(MENU) [Show others] [CLOCK/ LANG] (under  
[GENERAL SET] category) [AREA SET] and [SUMMERTIME] (p. 78).  
World time difference  
Time-zone  
differences  
Area setting  
Time-zone  
differences  
Area setting  
+10:00  
+11:00  
+12:00  
Melbourne, Sydney  
Solomon Is  
Fiji, Wellington, Eniwetok,  
Kwajalein  
Samoa  
Hawaii  
GMT  
Lisbon, London  
Berlin, Paris  
Helsinki, Cairo, Istanbul  
Moscow, Nairobi  
Tehran  
Abu Dhabi, Baku  
Kabul  
Karachi, Islamabad  
Calcutta, New Delhi  
Almaty, Dhaka  
Yangon  
Bangkok, Jakarta  
Hong Kong, Singapore,  
Beijing  
Seoul, Tokyo  
Adelaide, Darwin  
+01:00  
+02:00  
+03:00  
+03:30  
+04:00  
+04:30  
+05:00  
+05:30  
+06:00  
+06:30  
+07:00  
+08:00  
–11:00  
–10:00  
–09:00  
–08:00  
–07:00  
–06:00  
–05:00  
–04:00  
–03:30  
–03:00  
–02:00  
–01:00  
Alaska  
Los Angeles, Tijuana  
Denver, Arizona  
Chicago, Mexico City  
New York, Bogota  
Santiago  
St.John’s  
Brasilia, Montevideo  
Fernando de Noronha  
Azores, Cape Verde Is.  
+09:00  
+09:30  
9G4B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Maintenance and  
precautions  
HDR-XR150E/XR155E: Internal hard disk,  
memory card  
About the AVCHD format  
What is the AVCHD format?  
1
*
*
*
1080i specification  
A high definition specification which utilizes  
1,080 effective scanning lines and the interlace  
system.  
The AVCHD format is a high definition  
digital video camera format used to  
record a high definition (HD) signal of  
either the 1080i specification*1 or the  
720p specification*2 using efficient data  
compression coding technology. The  
MPEG-4 AVC/H.264 format is adopted to  
compress video data, and the Dolby Digital  
or Linear PCM system is used to compress  
audio data.  
The MPEG-4 AVC/H.264 format is capable  
of compressing images at higher efficiency  
than that of the conventional image  
compressing format. The MPEG-4 AVC/  
H.264 format enables a high definition  
video signal shot on a digital video camera  
recorder to be recorded on 8 cm DVD  
discs, hard disk drive, flash memory,  
memory card, etc.  
2
3
720p specification  
A high definition specification which utilizes  
720 effective scanning lines and the progressive  
system.  
Data recorded in AVCHD format other than  
the above mentioned cannot be played on your  
camcorder.  
About the “Memory Stickmedia  
“Memory Stick” media are a compact,  
portable IC recording medium with a large  
data capacity.  
You can use only “Memory Stick Duo”  
media, which are about the half size of  
standard “Memory Stick” media, with your  
camcorder.  
However, we do not guarantee the  
operation of all types of “Memory Stick  
Duo” media on your camcorder.  
Recording and playback on your  
camcorder  
Based on the AVCHD format, your  
Types of“Memory Stick”media  
Recording/Playback  
“Memory Stick Duo”  
media (with MagicGate)  
camcorder records with the high definition  
image quality (HD) mentioned below.  
In addition to high definition image  
quality (HD), your camcorder is capable  
of recording a standard definition (STD)  
signal in the conventional MPEG-2 format.  
“Memory Stick PRO  
Duo” (Mark2) media  
“Memory Stick PRO-HG  
Duo” media  
*  
* This product does not support 8-bit parallel  
data transfer but it supports 4-bit parallel data  
transfer the same as with “Memory Stick PRO  
Duo” media.  
This product cannot record or play data that  
uses “MagicGate” technology. “MagicGate” is  
a copyright protection technology that records  
and transfers the contents in an encrypted  
format.  
Video signal*3: MPEG-4 AVC/H.264 1920  
1080/50i, 1440 1080/50i  
Audio signal: Dolby Digital 2ch  
Recording media:  
HDR-CX110E/CX115E: Memory card  
HDR-CX116E/CX150E/CX155E: Internal  
memory, memory card  
“Memory Stick PRO Duo” media formatted by a  
computer (Windows OS/Mac OS) does not have  
guaranteed compatibility with your camcorder.  
GB  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Data read/write speed may vary depending on  
the combination of the “Memory Stick PRO  
Duo” media and “Memory Stick PRO Duo”  
media compliant product you use.  
Damaged or lost data may occur in the  
following cases (the data will not be  
compensated for):  
If you eject the “Memory Stick PRO Duo”  
media, or turn off your camcorder while your  
camcorder is reading or writing image files on  
the “Memory Stick PRO Duo” media (while  
the access lamp is lit or flashing)  
If you use the “Memory Stick PRO Duo”  
media near magnets or magnetic fields  
It is recommended that you make a back-up of  
important data on the hard disk of a computer.  
Do not attach a label or the like on “Memory  
Stick PRO Duo” media or “Memory Stick Duo”  
media adaptor.  
Do not touch, or allow metallic objects to come  
into contact with the terminals.  
Do not bend, drop or apply strong force to the  
“Memory Stick PRO Duo” media.  
Do not disassemble or modify the “Memory  
Stick PRO Duo” media.  
Do not let the “Memory Stick PRO Duo” media  
get wet.  
Keep the “Memory Stick PRO Duo” media out  
of the reach of small children. There is danger  
that a child might swallow it.  
Do not insert anything other than “Memory  
Stick PRO Duo” media into the “Memory  
Stick Duo” media slot. Doing so may cause a  
malfunction.  
Do not use or keep the “Memory Stick PRO  
Duo” media in the following locations:  
Places subject to extremely high temperature,  
such as a car parked outside in the summer  
Places under direct sunlight  
Places with extremely high humidity or  
subject to corrosive gases  
On the “Memory Stick Duomedia  
adaptor  
When using “Memory Stick PRO Duo” media  
with “Memory Stick” media compliant device,  
be sure to insert the “Memory Stick PRO Duo”  
media into “Memory Stick Duo” media adaptor.  
When using “Memory Stick PRO Duo” media  
with “Memory Stick” media compliant device  
inserting “Memory Stick PRO Duo” media  
into “Memory Stick Duo” media adaptor, make  
sure the “Memory Stick PRO Duo” media are  
inserted facing in the correct direction. Note  
that improper use may cause a malfunction.  
When using “Memory Stick PRO Duo” media  
inserted into “Memory Stick Duo” media  
adaptor on “Memory Stick” media compliant  
device, make sure the “Memory Stick PRO  
Duo” media adaptor is inserted into the device  
in the correct direction. If inserted in the wrong  
direction, the device may be damaged.  
Do not insert “Memory Stick Duo” media  
adaptor without “Memory Stick PRO Duo”  
media attached into “Memory Stick” media  
compliant device. Doing so may result in  
malfunctions of the device.  
On image data compatibility  
Image data files recorded on “Memory Stick  
PRO Duo” media by your camcorder conform  
to the “Design rule for Camera File system”  
universal standard established by the JEITA  
(Japan Electronics and Information Technology  
Industories Association).  
On your camcorder, you cannot play back  
photos recorded on other devices (DCR-  
TRV900E or DSC-D700/D770) that do not  
conform to the universal standard. (These  
models are not sold in some regions.)  
If you cannot use “Memory Stick PRO Duo”  
media that have been used with another device,  
format it with your camcorder (p. 74). Note  
that formatting erases all information on the  
“Memory Stick PRO Duo” media.  
You may not be able to play back images with  
your camcorder:  
When playing back image data modified on  
your computer  
9GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
When playing back image data recorded with  
other devices  
To use the battery pack effectively  
Battery pack performance decreases when the  
ambient temperature is 10 C (50 °F) or below,  
and the length of time you can use the battery  
pack becomes shorter. In that case, do one  
of the following to use the battery pack for a  
longer time.  
Put the battery pack in a pocket to warm it  
up, and install it on your camcorder right  
before you start taking shots.  
Use a large capacity battery pack: NP-FV70/  
NP-FV100 (sold separately).  
Frequent use of the LCD screen or a frequent  
playback, fast forward or reverse operation  
wears out the battery pack faster. We  
recommend using a large capacity battery pack:  
NP-FV70/NP-FV100 (sold separately).  
Be sure to close the LCD screen when not  
recording or playing back on your camcorder.  
The battery pack is also consumed when your  
camcorder is in recording standby or playback  
pause.  
Have spare battery packs ready for 2 or 3 times  
the expected recording time, and make trial  
recordings before making the actual recording.  
Do not expose the battery pack to water. The  
battery pack is not water resistant.  
About the “InfoLITHIUMbattery  
pack  
Your camcorder operates only with an  
“InfoLITHIUM” V series battery packs.  
“InfoLITHIUM” V series battery packs  
have the  
mark.  
What is an “InfoLITHIUMbattery pack?  
An “InfoLITHIUM” battery pack is a  
lithium-ion battery pack that has functions  
for communicating information related to  
operating conditions between your camcorder  
and an AC Adaptor/charger (sold separately).  
The “InfoLITHIUM” battery pack calculates the  
power consumption according to the operating  
conditions of your camcorder, and displays the  
remaining battery time in minutes.  
The battery pack NP-FV50 is compatible with  
ActiFORCE.”  
ActiFORCE” is a new generation power  
system. Battery capacity, boost charge, and  
the speed and accuracy of battery time  
remaining calculations have been improved  
when compared with current “InfoLITHIUM”  
P-series battery.  
About the remaining battery time  
indicator  
When the power goes off even though the  
remaining battery time indicator indicates that  
the battery pack has enough power to operate,  
charge the battery pack fully again. Remaining  
battery time will be indicated correctly. Note,  
however, that the battery indication will not be  
restored if it is used in high temperatures for  
a long time, or if left in a fully charged state,  
or when the battery pack is frequently used.  
Use the remaining battery time indication as a  
rough guide only.  
To charge the battery pack  
Be sure to charge the battery pack before you  
start using your camcorder.  
We recommend charging the battery pack in an  
ambient temperature of between 10 C to 30 C  
(50 °F to 86 °F) until the CHG (charge) lamp  
turns off. If you charge the battery pack outside  
of this temperature range, you may not be able  
to charge it efficiently.  
The mark that indicates low battery flashes  
even if there are still 20 minutes of battery  
time remaining, depending on the operating  
conditions or ambient temperature.  
GB  
9ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Near strong radio waves or radiation. The  
camcorder may not be able to record properly.  
Near AM receivers and video equipment.  
Noise may occur.  
On a sandy beach or anywhere dusty. If  
sand or dust gets in your camcorder, it may  
malfunction. Sometimes this malfunction  
cannot be repaired.  
About storage of the battery pack  
If the battery pack is not used for a long time,  
fully charge the battery pack and use it up on  
your camcorder once a year to maintain proper  
function. To store the battery pack, remove it  
from your camcorder and put it in a dry, cool  
place.  
To discharge the battery pack on your  
Near windows or outdoors, where the LCD  
screen, or the lens may be exposed to direct  
sunlight. This damages the LCD screen.  
Operate your camcorder on DC 6.8 V/7.2 V  
(battery pack) or DC 8.4 V (AC Adaptor).  
For DC or AC operation, use the accessories  
recommended in these operating instructions.  
Do not let your camcorder get wet, for example,  
from rain or sea water. If your camcorder  
gets wet, it may malfunction. Sometimes this  
malfunction cannot be repaired.  
camcorder completely, touch  
[Show others] [POWER SETTINGS]  
(under [GENERAL SET] category)   
[A.SHUT OFF] [NEVER], and leave your  
camcorder in recording standby until the power  
goes off (p. 78).  
(MENU)  
About battery life  
Battery capacity decreases over time and  
through repeated use. If decreased usage time  
between charges becomes significant, it is  
probably time to replace it with a new one.  
Each batterys life is governed by storage,  
operating and environmental conditions.  
If any solid object or liquid gets inside the  
casing, unplug your camcorder and have it  
checked by a Sony dealer before operating it  
any further.  
Avoid rough handling, disassembling,  
modifying, physical shock, or impact such  
as hammering, dropping or stepping on the  
product. Be particularly careful of the lens.  
Keep the LCD screen closed when you are not  
using your camcorder.  
Do not wrap your camcorder with a towel, for  
example, and operate it. Doing so might cause  
heat to build up inside.  
When disconnecting the power cord (mains  
lead), pull it by the plug and not the cord.  
Do not damage the power cord (mains lead)  
such as by placing anything heavy on it.  
Do not use a deformed or damaged battery  
pack.  
About x.v.Color  
x.v.Color is a more familiar term for the xvYCC  
standard proposed by Sony, and is a trademark  
of Sony.  
xvYCC is an international standard for color  
space in video. This standard can express a  
wider color range than the currently used  
broadcast standard.  
About handling of your camcorder  
On use and care  
Do not use or store the camcorder and  
accessories in the following locations:  
Anywhere extremely hot, cold or humid.  
Never leave them exposed to temperatures  
above 60 C (140 °F), such as under direct  
sunlight, near heaters or in a car parked in  
the sun. They may malfunction or become  
deformed.  
Keep metal contacts clean.  
If the battery electrolytic liquid has leaked:  
Consult your local authorized Sony service  
facility.  
Wash off any liquid that may have contacted  
your skin.  
If any liquid gets in your eyes, wash with  
plenty of water and consult a doctor.  
Near strong magnetic fields or mechanical  
vibration. The camcorder may malfunction.  
9G8B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
While using your camcorder, the back of  
the LCD screen may heat up. This is not a  
malfunction.  
When not using your camcorder for a  
long time  
To keep your camcorder in optimum state for a  
long time, turn it on and let it run by recording  
and playing back images about once a month.  
Use up the battery pack completely before  
storing it.  
To clean the LCD screen  
If fingerprints or dust make the LCD screen  
dirty, it is recommended that you use a soft  
cloth to clean it.  
When you use the LCD Cleaning Kit (sold  
separately), do not apply the cleaning liquid  
directly to the LCD screen. Use cleaning paper  
moistened with the liquid.  
Moisture condensation  
If your camcorder is brought directly from a cold  
place to a warm place, moisture may condense  
inside your camcorder. This may cause a  
malfunction to your camcorder.  
If moisture condensation has occurred  
Leave your camcorder for about 1 hour without  
turning it on.  
On adjustment of the touch panel  
(CALIBRATION)  
The buttons on the touch panel may not work  
correctly. If this happens, follow the procedure  
below. It is recommended that you connect your  
camcorder to the wall outlet (wall socket) using  
the supplied AC Adaptor during the operation.  
Note on moisture condensation  
Moisture may condense when you bring your  
camcorder from a cold place into a warm place  
(or vice versa) or when you use your camcorder  
in a humid place as follows:  
You bring your camcorder from a ski slope  
into a place warmed up by a heating device.  
You bring your camcorder from an air  
conditioned car or room into a hot place  
outside.  
(MENU) [Show others]   
[OTHER SETTINGS] (under  
[GENERAL  
SET] category) [CALIBRATION].  
You use your camcorder after a squall or a  
shower.  
You use your camcorder in a hot and humid  
place.  
Touch “” displayed on the screen with the  
corner of memory card or the like 3 times.  
Touch [CANCEL] to cancel calibration.  
How to prevent moisture condensation  
When you bring your camcorder from a cold  
place into a warm place, put your camcorder in  
a plastic bag and seal it tightly. Remove the bag  
when the air temperature inside the plastic bag  
has reached the surrounding temperature (after  
about 1 hour).  
Notes  
If you did not press the right spot, try the  
calibration again.  
Do not use a sharp-pointed object for  
calibration. Doing so may damage the LCD  
screen.  
You cannot calibrate the LCD screen if it is  
rotated, or closed with the screen facing out.  
LCD screen  
Do not exert excessive pressure on the LCD  
screen, as it may cause uneven color and other  
damage.  
If your camcorder is used in a cold place, a  
residual image may appear on the LCD screen.  
This is not a malfunction.  
GB  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
On handling the casing  
How to charge the pre-installed  
rechargeable battery  
Connect your camcorder to a wall outlet (wall  
socket) using the supplied AC Adaptor, and leave  
it with the LCD screen closed for more than 24  
hours.  
If the casing is soiled, clean the camcorder body  
with a soft cloth lightly moistened with water,  
and then wipe the casing with a dry soft cloth.  
Avoid the following to avoid damage to the  
finish:  
Using chemicals such as thinner, benzine,  
alcohol, chemical cloths, repellent, insecticide  
and sunscreen  
Handling the camcorder with above  
substances on your hands  
Leaving the casing in contact with rubber or  
vinyl objects for a long period of time  
Note on disposal/transfer (HDR-  
CX116E/CX150E/CX155E/XR150E/  
XR155E)  
Even if you delete all movies and still images, or  
perform [MEDIA FORMAT] (p. 74), data on the  
internal recording media may not be completely  
erased. When you transfer the camcorder, it is  
recommended that you perform [EMPTY] (p. 75)  
to prevent the recovery of your data. Also, when  
you dispose of the camcorder, it is recommended  
that you destroy the actual body of the camcorder.  
About care and storage of the lens  
Wipe the surface of the lens clean with a soft  
cloth in the following instances:  
When there are fingerprints on the lens  
surface  
In hot or humid locations  
When the lens is exposed to salty air such as  
at the seaside  
Store in a well-ventilated location subject to  
little dirt or dust.  
To prevent mold, periodically clean the lens as  
described above.  
Note on disposal/transfer of the  
memory card  
Even if you delete data in the memory card or  
format the memory card on your camcorder or  
a computer, you may not delete data from the  
memory card completely. When you give the  
memory card to somebody, it is recommended  
that you delete date completely using data  
deletion software on a computer. Also, when you  
dispose of the memory card, it is recommended  
that you destroy the actual body of the memory  
card.  
On charging the pre-installed  
rechargeable battery  
Your camcorder has a pre-installed rechargeable  
battery to retain the date, time, and other settings  
even when the LCD screen is closed. The pre-  
installed rechargeable battery is always charged  
while your camcorder is connected to the wall  
outlet (wall socket) via the AC Adaptor or while  
the battery pack is attached. The rechargeable  
battery will be fully discharged in about 3 months  
if you do not use your camcorder at all. Use  
your camcorder after charging the pre-installed  
rechargeable battery.  
However, even if the pre-installed rechargeable  
battery is not charged, the camcorder operation  
will not be affected as long as you are not  
recording the date.  
10G0B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
All other product names mentioned herein may  
be the trademarks or registered trademarks of  
their respective companies. Furthermore,   
and are not mentioned in each case in this  
Handbook.  
On trademarks  
“Handycam” and  
are  
registered trademarks of Sony Corporation.  
AVCHD” and AVCHD” logotype are  
trademarks of Panasonic Corporation and Sony  
Corporation.  
“Memory Stick,” “  
,” “Memory Stick Duo,” “  
,” “Memory Stick PRO Duo,”  
,” “Memory Stick  
,”  
PRO-HG Duo,” “  
“MagicGate,” “  
,” “MagicGate  
Memory Stick” and “MagicGate Memory Stick  
Duo” are trademarks or registered trademarks  
of Sony Corporation.  
“InfoLITHIUM” is a trademark of Sony  
Corporation.  
“x.v.Colour” is a trademark of Sony  
Corporation.  
“BIONZ” is a trademark of Sony Corporation.  
“BRAVIAis a trademark of Sony Corporation.  
“DVDirect” is a trademark of Sony  
Corporation.  
“Blu-ray Disc” and the logo are trademarks.  
Dolby and the double-D symbol are trademarks  
of Dolby Laboratories.  
HDMI, the HDMI logo and High-Definition  
Multimedia Interface are trademarks or  
registered trademarks of HDMI Licencing LLC.  
Microsoft, Windows, Windows Vista, and  
DirectX are either registered trademarks or  
trademarks of Microsoft Corporation in the  
United States and/or other countries.  
Macintosh and Mac OS are registered  
trademarks of Apple Inc. in the U.S. and other  
countries.  
Intel, Intel Core, and Pentium are trademarks  
or registered trademarks of Intel Corporation  
or its subsidiaries in the United States and other  
countries.  
“PlayStation” is a registered trademark of Sony  
Computer Entertainment Inc..  
Adobe, the Adobe logo, and Adobe Acrobat  
are either registered trademarks or trademarks  
of Adobe Systems Incorporated in the United  
States and/or other countries.  
SDHC logo is a trademark.  
MultiMediaCard is a trademark of  
MultiMediaCard Association.  
GB  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on the License  
On GNU GPL/LGPL applied software  
ANY USE OF THIS PRODUCT OTHER  
THAN CONSUMER PERSONAL USE IN ANY  
MANNER THAT COMPLIES WITH THE  
MPEG-2 STANDARD FOR ENCODING VIDEO  
INFORMATION FOR PACKAGED MEDIA  
IS EXPRESSLY PROHIBITED WITHOUT A  
LICENSE UNDER APPLICABLE PATENTS IN  
THE MPEG-2 PATENT PORTFOLIO, WHICH  
LICENSE IS AVAILABLE FROM MPEG LA,  
L.L.C., 250 STEELE STREET, SUITE 300,  
DENVER, COLORADO 80206.  
The software that is eligible for the following  
GNU General Public License (hereinafter referred  
to as “GPL) or GNU Lesser General Public  
License (hereinafter referred to as “LGPL) are  
included in the camcorder.  
This informs you that you have a right to have  
access to, modify, and redistribute source code for  
these software programs under the conditions of  
the supplied GPL/LGPL.  
Source code is provided on the web. Use  
the following URL to download it. When  
downloading the source code, select DCR-SX43  
as the model for your camcorder.  
http://www.sony.net/Products/Linux/  
We would prefer you do not contact us about the  
contents of source code.  
THIS PRODUCT IS LICENSED UNDER THE  
AVC PATENT PORTFOLIO LICENSE FOR THE  
PERSONAL AND NON-COMMERCIAL USE  
OF A CONSUMER TO  
(i) ENCODE VIDEO IN COMPLIANCE  
WITH THE AVC STANDARD (AVC VIDEO”)  
AND/OR  
(ii) DECODE AVC VIDEO THAT WAS  
ENCODED BY A CONSUMER ENGAGED IN A  
PERSONAL AND  
NON-COMMERCIAL ACTIVITY AND/OR  
WAS OBTAINED FROM A VIDEO PROVIDER  
LICENSED TO PROVIDE AVC VIDEO.  
NO LICENSE IS GRANTED OR SHALL BE  
IMPLIED FOR ANY OTHER USE.  
Read “license2.pdfin the “License” folder on the  
CD-ROM. You will find licenses (in English) of  
“GPL,” and “LGPLsoftware.  
To view the PDF, Adobe Reader is needed. If  
it is not installed on your computer, you can  
download it from the Adobe Systems web page:  
http://www.adobe.com/  
ADDITIONAL INFORMATION MAY BE  
OBTAINED FROM MPEG LA, L.L.C.  
SEE <HTTP://MPEGLA.COM>  
“C Library,” “Expat,” “zlib,” “libjpeg,” “dtoa,” and  
“pcre” software are provided in your camcorder.  
We provide this software based on license  
agreements with their owners of copyright. Based  
on requests by the owners of copyright of these  
software applications, we have an obligation  
to inform you of the following. Please read the  
following sections.  
Read “license1.pdfin the “License” folder on the  
CD-ROM. You will find licenses (in English) of  
“C Library,” “Expat,” “zlib,” “libjpeg,” “dtoa,” and  
“pcre” software.  
10G2B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick reference  
Screen indicators  
Upper right  
Upper left  
Center  
Upper right  
Indicator  
Meaning  
Recording image quality  
(HD/STD) and recording  
mode (FX/FH/HQ/LP)  
Recording/playback/  
editing media (17)  
Counter (hour:minute:  
Estimated recording  
remaining time (22)  
0:00:00  
Bottom  
[00min]  
Upper left  
Indicator  
Meaning  
MENU button (58)  
Approximate number of  
recordable photos and  
recording media (24)  
9999  
9999  
9999  
Self-timer recording (71)  
MICREF LEVEL low (69)  
BLT-IN ZOOM MIC (69)  
Remaining battery  
Playback folder (31)  
Current playing movie or  
photo/Number of total  
recorded movies or photos  
100/112  
60 min  
Recording folder  
Return button (58)  
Bottom  
Indicator  
Meaning  
Center  
[FACE DETECTION] set  
SMILE DETECTION (69)  
Indicator  
Meaning  
[STBY]/[REC]  
Recording status (22)  
Slide show set (36)  
Warning (86)  
Manual focus (66)  
SCENE SELECTION (63)  
Playback mode (30)  
Drop sensor off (79)  
Drop sensor activated (79)  
White balance (64)  
SteadyShot off (68)  
TELE MACRO (66)  
X.V.COLOR (70)  
INTELLIGENT AUTO  
GB  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Parts and controls  
Figures in ( ) are reference pages.  
Indicator  
Meaning  
OPTION button (60)  
VIEW IMAGES button  
Slide show button (36)  
Data file name (31)  
Protected image (41)  
Index button (31)  
HDR-CX110E/CX115E/CX116E/  
CX150E/CX155E  
101-0005  
Indicators and their positions are approximate  
and may differ from what you actually see.  
Some indicators may not appear, depending on  
your camcorder model.  
HDR-XR150E/XR155E  
Lens (Carl Zeiss lens)  
LENS COVER switch (20)  
Built-in microphone  
10G4B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
RESET button  
Press RESET using a pointed object.  
Press RESET to initialize all the settings  
including the clock setting.  
HDR-CX115E/CX116E/CX155E/XR155E:  
output only  
MODE button (21)  
(Movie)/ (Photo) lamps (21)  
If you rotate the LCD panel 180 degrees, you  
can close the LCD panel with the LCD screen  
facing out. This is convenient during playback  
operations.  
(DISC BURN) button (see Operating  
Guide)  
(INTELLIGENT AUTO) button (25)  
POWER button (15)  
HDR-CX110E/CX115E/CX116E/  
CX150E/CX155E  
HDR-CX110E/CX115E/CX116E/  
CX150E/CX155E  
HDR-XR150E/XR155E  
(VIEW IMAGES) button (29)  
Speaker  
GB  
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
HDR-XR150E/XR155E  
Power zoom lever (25, 35)  
PHOTO button (24)  
START/STOP button (22)  
A/V Remote Connector (37)  
Hook for a shoulder belt  
Memory card slot (19)  
BATT (battery) release lever (14)  
Memory card access lamp (19)  
While the lamp is lit or flashing, the  
camcorder is reading or writing data.  
Tripod receptacle  
Attach a tripod (sold separately) to the  
tripod receptacle using a tripod screw (sold  
separately: the length of the screw must be less  
than 5.5 mm (7/32 in.)).  
10GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index  
DEMO MODE............................79  
DIGITAL ZOOM .......................70  
Disc recorder...............................56  
DISPLAY SET .............................76  
DISP OUTPUT...........................78  
DIVIDE........................................42  
DOWNLOAD MUSIC ..............35  
DROP SENSOR ..........................79  
Dual Rec ......................................28  
Dubbing.......................................44  
DVDirect Express.......................52  
DVD writer............................52, 55  
Symbols  
I
1080i/576i....................................77  
16:9 ...............................................77  
4:3 .................................................77  
576i...............................................77  
IMAGE SIZE...............................71  
INDOOR .....................................64  
“InfoLITHIUM” battery pack...97  
INTELLIGENT AUTO........25, 86  
A
L
A.SHUT OFF ..............................78  
A/V connecting cable...........38, 56  
Abroad .........................................93  
AREA SET...................................78  
AUDIO REC SET .......................69  
AUTO BACK LIGHT ................70  
AVCHD format...........................95  
LANDSCAPE..............................63  
LANGUAGE SET.................16, 78  
LCD BL LEVEL ..........................76  
LCD BRIGHT .............................76  
LCD COLOR...............................76  
LOW LUX....................................68  
LP..................................................26  
E
EDIT.............................................40  
EMPTY........................................75  
EMPTY MUSIC..........................35  
EXPOSURE.................................65  
External media............................49  
B
M
BATTERY INFO.........................74  
Battery pack.................................12  
BEACH ........................................63  
BEEP.............................................76  
BLACK FADER ..........................64  
BLT-IN ZOOM MIC..................69  
“BRAVIASync...........................39  
Maintenance................................95  
MANAGE MEDIA...............17, 74  
MANUAL SETTINGS...............63  
MEDIA FORMAT......................74  
MEDIA INFO .............................74  
MEDIA SETTINGS....................17  
Memory card...............................18  
“Memory Stick” media.........18, 95  
F
FACE DETECTION.............68, 86  
Face Index....................................33  
FADER.........................................63  
FH.................................................26  
FILE NO.......................................71  
Film Roll Index ...........................32  
FIREWORKS ..............................63  
FOCUS.........................................66  
Format..........................................74  
Fully charged...............................12  
FX .................................................26  
C
“Memory Stick PRO-HG Duo”  
media......................................18, 95  
“Memory Stick PRO Duo”  
CALIBRATION..........................99  
CAMERA DATA ........................72  
Capturing a photo from  
a movie.........................................43  
Charging the battery pack.........12  
Charging the battery pack  
abroad ....................................14, 93  
CLOCK/LANG...........................78  
CLOCK SET................................15  
COMPONENT...........................77  
CONVERSION LENS................68  
Copy.............................................45  
Creating a disc ............................51  
CTRL FOR HDMI......................79  
media......................................18, 95  
Menus.....................................58, 61  
MICREF LEVEL.........................69  
Mirror mode ...............................28  
Moisture condensation ..............99  
MOVIE DUB ..............................44  
MOVIE MEDIA SET .................17  
Movies....................................22, 30  
MPEG-4 AVC/H.264 .................95  
MUSIC TOOL ............................74  
MY MENU..................................59  
MY MENU SETTING...............59  
G
GENERAL SET...........................76  
GUIDEFRAME...........................67  
H
HD/STD SET ..............................26  
HDMI RESOLUTION...............77  
HIGHLIGHT ..............................33  
Highlight Playback.....................33  
HQ................................................26  
D
O
DATA CODE ........................16, 72  
DATE/TIME..........................16, 72  
Date Index ...................................32  
DELETE.......................................40  
ONE PUSH .................................64  
Operation flow..............................6  
OPTION MENU ........................60  
Original........................................44  
GB  
10ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
OTHER REC SET.......................70  
OTHERS......................................74  
OTHER SETTINGS...................79  
OUTDOOR.................................64  
OUTPUT SETTINGS................77  
Self-diagnosis display/Warning  
indicators.....................................86  
W
Wall outlet (wall socket)............12  
Warning messages......................88  
WHITE BAL. ..............................64  
WHITE FADER..........................63  
Wide angle...................................25  
WIDE SELECT...........................70  
SELF-TIMER...............................71  
SCENARIO ERASE....................35  
SHOOTING SET........................67  
Slide show....................................36  
SLIDE SHOW SET.....................36  
SMILE DETECTION...........69, 86  
SMILE SENSITIVITY..........69, 86  
Smile Shutter...............................28  
SMTH SLW REC........................66  
SNOW..........................................63  
SOUND/DISP SET.....................76  
SPOT FOCUS .............................65  
SPOTLIGHT...............................63  
SPOT METER.............................65  
SPOT MTR/FCS.........................65  
STEADYSHOT ...........................68  
SUMMERTIME..........................78  
SUNRISE&SUNSET...................63  
Supplied items...............................2  
P
PAL...............................................93  
PB zoom.......................................35  
PHOTO CAPTURE...................43  
PHOTO COPY ...........................45  
PHOTO MEDIA SET ................18  
Photos ....................................24, 31  
PHOTO SETTINGS...................71  
PLAYBACK.................................72  
PLAYBACK SET.........................72  
Playing..........................................29  
Playlist..........................................46  
PLAYLIST EDIT.........................46  
PORTRAIT..................................63  
Power on......................................15  
POWER ON BY LCD................78  
POWER SETTINGS ..................78  
Precautions..................................95  
PRIORITY SETTING..........69, 86  
PROTECT ...................................41  
X
x.v.Color.................................70, 98  
Z
Zoom......................................25, 35  
T
TELE MACRO............................66  
Telephoto.....................................25  
Thumbnail...................................40  
Tripod.........................................106  
Troubleshooting..........................80  
TV.................................................37  
TV color systems........................93  
TV CONNECT Guide...............37  
TV TYPE.....................................77  
TWILIGHT.................................63  
R
REC MODE.................................26  
Recording ....................................20  
Recording and playback time ...90  
Recording media.........................17  
Recording time of movies/  
number of recordable photos....90  
U
Repair...........................................80  
REPAIR IMG.DB F...............87, 88  
RESET........................................105  
USB cable...............................52, 55  
USB CONNECT...................52, 55  
S
V
Saving images in external  
media............................................49  
SCENARIO..................................34  
SCENE SELECTION ...........63, 86  
Screen indicators ......................103  
VBR ..............................................90  
VIEW IMAGES ....................29, 32  
VISUAL INDEX .........................29  
Volume...................................31, 76  
10G8B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information on this product and  
answers to frequently asked questions can  
be found at our Customer Support Website.  
http://www.sony.net/  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Satellite Radio SK 5012 User Manual
Sharp Projection Television XG NV6XU User Manual
Silvercrest CD Player KH 2278 User Manual
Sony Computer Monitor GDM 200PST9 User Manual
Sony Frozen Dessert Maker ICF SW77 User Manual
Sony Portable Stereo System 320 User Manual
Sony Webcam EVI HD3V User Manual
Standard Horizon Fish Finder CP150C User Manual
Sunbeam Frozen Dessert Maker GL8200 User Manual
Tapco International Corporation Boat 144R User Manual