4-078-366-51 (1)
Trin it ro n Colo r TV
Operating Instructions
•
Before operating the unit, please read this manual thoroughly and retain
it for future reference.
KV-EX34
KV-EX29
M87
© 2000 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta b le o f Co n t e n t s
Usin g Yo u r Ne w TV
Getting Started ............................................................................................. 4
Step 1: Connect the antenna ................................................................. 4
Step 2: Insert the batteries into the remote ......................................... 5
Step 3: Preset the channels automatically ........................................... 5
Connecting the 3D WOOFER .................................................................... 6
Connecting optional components ............................................................. 7
Securing the TV .......................................................................................... 10
Watching the TV ........................................................................................ 11
GB
Changing the “PICTURE” setting
.. 25
Ad va n ce d Op e ra t io n s
Changing the “SOUND” setting .... 27
Selecting the picture and sound
modes .................................................. 15
Changing the “PIP” setting
........ 29
Viewing higher quality pictures ...... 16
Changing the “SETUP”setting
Changing the channel preset
... 30
Viewing your favorite channels ....... 17
(“CH PRESET”) setting
.............. 32
Watching two programs at the
same time ............................................ 18
Ad d it io n a l In fo rm a t io n
Listening with surround sound ....... 19
Self-diagnosis function ...................... 35
Troubleshooting ................................. 36
Overview of controls ......................... 39
Specifications ...................... Back cover
Operating optional components ...... 20
Ad ju st in g Yo u r Se t u p (MENU)
Introducing the menu system .......... 22
WARNING (co n t in u e d )
Do not install the TV in an unstable position.
Use a proper TV stand.
Do not place any objects on the TV.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Usin g Yo u r Ne w TV
Ge t t in g St a rt e d
CAUTION
• Do not connect the power cord until you have completed making all other
connections; otherwise a minimum leakage current might flow through
the antenna and other terminals to ground.
• To avoid battery leakage and damage to the remote, remove the batteries
from the remote if you are not going to use it for several days. If any
liquid that leaks from the batteries touches you, immediately wash it
away with water.
St e p 1
Co n n e ct t h e a n t e n n a
If you wish to connect a VCR, see the Connecting a VCR diagram below.
Rear of TV
Antenna cable (not supplied)
or
IEC connector
(not supplied)
Antenna cable (not supplied)
: Signal flow
Co n n e ct in g a VCR
To watch the video input, press t (see page 12).
To 8 (antenna)
Antenna cable (not supplied)
Rear of TV
To antenna
output
VCR
R
1
L
Y
CB
CR
WOOFER
4
2
3
AUDIO VIDEO
S video cable
R
L
(not supplied)
VIDEO IN
VIDEO OUT
To
To S video
output
To video and
(S video input)
To t 1, 2, or 3
(video input)
audio outputs
(yellow )
-L (MONO) (w hite)
-R (red)
Audio/Video cable
(not supplied)
: Signal flow
4
Using Your New TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• If you connect a monaural VCR, connect the yellow plug to
jack) and the black plug to -L (MONO) (the white jack).
(the yellow
• If you connect a VCR to the 8 (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• When both the
(S video input) and t1 (video input) are connected,
the (S video input) is automatically selected. To view the video input
to t 1 (video input), disconnect the S video cable.
• When no signal is input from the connected video equipment, the TV
screen becomes blue.
St e p 2
b
In se rt t h e b a t t e rie s in t o
t h e re m o t e
Note
• Do not use old batteries or different types of batteries together.
St e p 3
Pre se t t h e ch a n n e ls a u t o m a t ica lly
Front panel
1
L(MONO)
4
R
ENTER
SELECT
A
UTO
M
E
N
U
P
R
O
G
R
PROGR
AUTO PROGRAM
PR : 0 1
T V SYS : AUTO
VHF LOW
1
2
b
AUTO
PROGR
Tips
• To stop the automatic channel presetting, press MENU.
• If your TV has preset an unwanted channel or cannot preset a particular
channel, then preset your TV manually (see page 33).
Using Your New TV
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e ct in g t h e 3D WOOFER
You can enjoy high quality sound by connecting the 3D WOOFER.
1
Bottom of 3D WOOFER
2
Rear of TV
3
3
D
WOOFER
Red w ire
Black w ire
Place the foot at the front of the 3D WOOFER into the footholds on the top
of your TV.
1
2
3
Place the foot at the rear of the 3D WOOFER into the footholds at the rear
of your TV.
Connect the wires to the 3D WOOFER (4Ω) terminals at the rear of your TV.
The red wire should be connected to the 3 red terminal and the black wire
to the # black terminal.
Notes
• Connect only the supplied 3D WOOFER; otherwise your TV may
malfunction.
• Unplug your TV from the wall outlet when connecting the 3D WOOFER.
• To prevent a malfunction caused by a short circuit of the terminals, make
sure that none of the 3D WOOFER wire strands stick out, making contact
with it’s neighbouring 3D WOOFER terminal.
6
Using Your New TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e ct in g o p t io n a l co m p o n e n t s
You can connect optional audio/video components, such as a VCR, multi disc player,
camcorder, video game, or stereo system. To watch and operate the connected
equipment, see pages 12 and 20.
Co n n e ct in g a ca m co rd e r/vid e o g a m e e q u ip m e n t
u sin g t h e t (vid e o in p u t ) ja cks
Front of TV
S video cable (not supplied)
Audio/Video cable (not supplied)
To video and
To
(S video
input)
To t 4
(video input)
audio outputs
Camcorder
L(MONO)
R
ENTER
SELECT
4
A
UTO
M
E
N
U
P
R
O
G
R
PROGR
or
L(MONO)
R
To S video output
Video game
equipment
4
: Signal flow
Notes
• When connecting video game equipment, display the “PICTURE” menu
and select “ON” for “GAME MODE” to adjust the picture setting that is
suitable for video games (see page 25).
• You can also connect video equipment to the t 1, 2, or 3 (video input)
jacks at the rear of your TV.
• When both the
the (S video input) is automatically selected. To view the video input
to t 4 (video input), disconnect the S video cable.
(S video input) and t 4 (video input) are connected,
Co n n e ct in g a u d io /vid e o e q u ip m e n t u sin g t h e T
(m o n it o r o u t p u t ) ja cks
Rear of TV
Antenna cable (not supplied)
To
antenna
R
L
Y
CB
CR
WOOFER
4
Audio system
VCR
output
1
2
3
or
To
audio
inputs
To video and
audio inputs
To T
(monitor
output)
(yellow )
Audio cable
(not supplied)
-L (MONO)
(w hite)
-R (red)
Audio/Video cable (not supplied)
: Signal flow
Note
• If you select “DVD” on your TV screen, no signal will be output at the
T (monitor output) jacks (see page 12).
continued
Using Your New TV
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e ct in g o p t io n a l co m p o n e n t s (co n t in u e d )
Co n n e ct in g a DVD p la ye r t o
(co m p o n e n t vid e o in p u t )
1 Using an audio cable, connect R and L under
(component video input) on your
TV to the LINE OUT, AUDIO R and L output connectors on your DVD player.
2 Using a component video cable, connect Y, CB, and CR under
input) on your TV to the COMPONENT VIDEO OUT Y, CB, and CR output
connectors on your DVD player.
(component video
3 Press t on the remote or the TV until “DVD” appears on the screen.
Rear of TV
DVD player
R
L
Y
CB
CR
COMPONENT VIDEO OUT
CR CB
S VIDEO OUT
LINE OUT
R-AUDIO-L
Y
VIDEO
To
L (w hite)
R (red)
Audio cable
(not supplied)
To audio
output
To
(component video input)
: Signal flow
To component
video output
Component video cable
(not supplied)
Notes
• Some DVD player terminals may be labeled differently:
Connect
Y (green)
CB (blue)
CR (red)
To (on the DVD player)
Y
Cb, B-Y or PB
Cr, R-Y or PR
• When connecting to
(component video input) on your TV, you must
connect Y, CB, and CR to receive the video signals, and connect L and R to
receive analog audio signals.
8
Using Your New TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e ct in g a DVD p la ye r t o t (vid e o in p u t )
Connect t 1, 2, or 3 (video input)
/
(audio/video) connectors on your TV to LINE
OUT on your DVD player.
Rear of TV
DVD player
R
1
L
Y
CB
CR
WOOFER
4
2
3
LINE OUT
R-AUDIO-L
VIDEO
(yellow )
-L (MONO) (w hite)
-R (red)
To video and
audio outputs
Audio/Video cable (not supplied)
To t 1, 2, or 3
(video input)
: Signal flow
Notes
• Since the high quality pictures on a DVD disc contain a lot of information,
picture noise may appear. In this case, adjust the sharpness (“SHARP”)
under “PERSONAL ADJUST” in the “PICTURE MODE” menu (see
page 26).
• Connect your DVD player directly to your TV. Connecting the DVD
player through other video equipment will cause unwanted picture noise.
Using Your New TV
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Se cu rin g t h e TV
To prevent the TV from falling, secure the TV using one of the following methods:
With the supplied screw s, attach the stabilizer band to the TV stand and to
the rear of the TV using the provided hole.
A
OR
Put the cord or chain through the clamps to secure the TV against a w all or
pillar.
B
20
mm
3.8 mm
A
B
OR
Note
• Use only the supplied screws. Use of other screws may damage the TV.
10
Using Your New TV
Download from Www.Somanuals.com. All Manuals Search And Download.
Wa t ch in g t h e TV
DRC-MF
This section explains various functions
and operations available while watching
the TV. Most operations can be done
using the remote.
1
4
7
2
5
8
0
3
6
9
Number buttons
JUMP
PIC MODE
MENU
PIP PROGR
ENTER
L(MONO)
4
R
ENTER
SELECT
AUTO
MENU PROGR
PROGR
1 indicator
FAVORITE
SOUND
RESET
PIP PROGR
MODE SURROUND
PROGR
ENTER
SELECT
AUTO
MENU PROGR
PROGR
PROGR +/–
Press ! to turn on the TV.
1
2
When the TV is in standby
mode (the 1 indicator on
the TV is lit red), press ?/1
on the remote or
PROGR +/ – on the TV.
Press PROGR +/– or the
number buttons to select
the TV channel.
1
4
7
2
5
8
0
3
6
PROGR
or
For double digit numbers, press
-, then the number (e.g., for 25,
press -, then 2 and 5).
9
J
Note
•
When you turn on the TV, either the program number or video mode is
displayed for approximately 40 seconds. The ECO MODE (
also appear if “ECO MODE “ in the “SETUP” menu is set “ON” (see
page 30).
) icon will
To select a TV program quickly
(1) Press and hold PROGR +/ –.
(2) Release PROGR +/ – when the desired program number appears.
Note
•
When you select a TV program quickly, the picture may be disrupted.
This does not indicate a malfunction.
continued
Using Your New TV
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Wa t ch in g t h e TV (co n t in u e d )
DRC-MF
1
4
7
2
5
8
0
3
6
9
JUMP
JUMP
L(MONO)
4
R
ENTER
SELECT
A
UTO
M
E
N
U
P
R
O
G
R
PROGR
1 indicator
PIC MODE
MENU
PIP PROGR
ENTER
MENU
ENTER
SELECT
V/v/ENTER
AUTO
MENU PROGR
PROGR
FAVORITE
SOUND
RESET
PIP PROGR
MODE SURROUND
PROGR
2 +/–
VIDEO
TITLE
TV
Ad d it io n a l t a sks
To
Press
Turn off temporarily
?/1.
The 1 indicator on the TV lights up red.
Turn off completely
Adjust the volume
Mute the sound
! on the TV.
2 +/ –.
%.
Watch the video input
(VCR, camcorder, etc.)
t (or t on the TV) to select “VIDEO 1”,
“VIDEO 2”, “VIDEO 3”, “VIDEO 4”or “DVD”.
To return to the TV screen, press a (or t on the TV).
Jump back to the previous channel
Display the on-screen information*
JUMP.
.
* Some picture/ sound settings, and either the program number or video
mode are displayed. The on-screen display for the picture/ sound settings
disappears after about 3 seconds.
Using Your New TV
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Ch a n g in g t h e m e n u la n g u a g e
You can change the menu language as well as the on-screen language. For details on
how to use the menu, see Introducing the menu system on page 22.
Press MENU.
P I CTURE
DRC - MF : DRC 1 2 5 0
P I CTURE MODE : DYNAM I C
WI DE MODE : OF F
GAME+ MODE+: + + + + + + + + + +
OF F
1
MENU
b
Press V or v to select
then press ENTER.
,
SE TUP
2
3
4
L ANGUAGE : ENGL I SH
P I C ROT A T I ON
ECO MODE : OF F
PROGRAM SE TUP
COLOR SYS : AUTO
ENTER
ENTER
b
b
b
SE TUP
L ANGUAGE :
Make sure “LANGUAGE” is
selected then press ENTER .
ENGL I SH
P I C ROT A T I O
ECO MODE : OF
PROGRAM SE T
ENTER
COLOR SYS :
A
Press V or v to select the
desired language
(e.g.,”
“), then
ENTER
ENTER
b
b
press ENTER .
The selected menu
language appears.
To return to the normal screen
Press MENU.
continued
Using Your New TV
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Wa t ch in g t h e TV (co n t in u e d )
Se t t in g t h e Wa ke Up t im e r
Press
until the desired
WAKE UP TIMER:10M
After 10 minutes
1
period of time appears.
The Wake Up timer starts
immediately after you
have set it.
b
WAKE UP TIMER:OFF
No Wake Up Timer
WAKE UP TIMER:12H00M
After 12 hours
Select the TV channel or video mode you want to wake up to.
2
3
Press [/1, or set the Sleep timer if you want the TV to turn off
automatically.
The indicator on the TV lights up orange.
To cancel the Wake Up timer
Press until “WAKE UP TIMER: OFF” appears, or turn off the
TV’s main power.
Note
•
If no buttons or controls are pressed for more than two hours after the TV
is turned on using the Wake Up timer, the TV automatically goes into
standby mode. To resume watching the TV, press any button or control on
the TV or the remote.
Se t t in g t h e Sle e p t im e r
Press
until the desired
period of time appears.
SLEEP TIMER:30M
After 30 minutes
SLEEP TIMER:60M
After 60 minutes
The Sleep timer starts
immediately after you
have set it.
b
SLEEP TIMER:OFF
No Sleep Timer
SLEEP TIMER:90M
After 90 minutes
To cancel the Sleep timer
Press until “SLEEP TIMER: OFF” appears, or turn the TV off.
Using Your New TV
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Ad va n ce d Op e ra t io n s
Se le ct in g t h e p ict u re
a n d so u n d m o d e s
PIC MODE
MENU
PIP PROGR
ENTER
PIC MODE
FAVORITE
SOUND
RESET
PIP PROGR
You can select picture and sound modes
and adjust the setting to your preference
in the “PERSONAL” option.
MODE SURROUND
PROGR
SOUND MODE
Se le ct in g t h e p ict u re m o d e
Press PIC MODE
repeatedly until the
desired picture mode is
selected.
PIC MODE
DYNAMIC
STANDARD
HI-FINE
PERSONAL
Select
To
receive high contrast pictures.
“DYNAMIC”
“STANDARD” receive normal pictures.
“HI-FINE”
receive higher resolution pictures with mild contrast.
“PERSONAL” receive the last adjusted picture setting from the “ADJUST” option in the
“PICTURE” menu (see page 26).
Se le ct in g t h e so u n d m o d e
Press SOUND MODE
≥
≥
DYNAMIC
≥
≥
DRAMA
SOFT
SOUND
MODE
repeatedly until the
desired sound mode is
selected.
PERSONAL
Select
To
“DYNAMIC”
listen to dynamic and clear sound that emphasizes both the low and high
tones.
“DRAMA”
“SOFT”
listen to sound that emphasizes voice and high tones.
receive soft sound.
“PERSONAL” receive the last adjusted sound setting from the “ADJUST” option in the
“SOUND” menu (see page 28).
Tip
• You can also set the picture and sound modes using the menu (see
Changing the “PICTURE” setting on page 25 and Changing the
“SOUND” setting on page 27 ).
Advanced Operations
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Vie w in g h ig h e r
DRC-MF
q u a lit y p ict u re s
DRC-MF
— “ DRC-MF”
1
4
7
2
5
8
0
3
6
9
The Digital Reality Creation-Multi
Function (DRC-MF) feature allows you
to enjoy higher quality pictures on your
TV. You can select “DRC1250” to watch
super real (higher resolution) pictures,
or “DRC PROGRESSIVE” to reduce any
jittering on the screen if necessary.
JUMP
PIC MODE
MENU
PIP PROGR
ENTER
FAVORITE
SOUND
RESET
PIP PROGR
MODE SURROUND
Press DRC-MF repeatedly
DRC-MF
until you receive the
DRC-MF: DRC1250
DRC-MF: DRC PROGRESSIVE
b
desired picture quality.
To
select higher resolution pictures.
Select
“DRC1250”
reduce jitter of any small areas or scanning lines (e.g., letters
or the edge of objects) on the screen.
“DRC PROGRESSIVE”
Tips
•
You can also select the DRC-MF option using the menu (see Changing the
“PICTURE” setting on page 25).
•
When the broadcast signal is weak, you may see some dots or noise on the
TV screen. To reduce this interference, display the “PICTURE” menu and
select “ADJUST” in “PICTURE MODE”, then adjust “SHARP” to reduce
the sharpness (see page 26).
Note
The DRC-MF mode is not selectable when the “GAME MODE” or Picture-
In-Picture (“PIP”) mode is turned “ON”.
•
The DRC-MF logo (
Sony Corporation.
) and “DRC-MF” are trademarks of
16
Advanced Operations
Download from Www.Somanuals.com. All Manuals Search And Download.
Vie w in g yo u r
DRC-MF
fa vo rit e ch a n n e ls
You can display and select six of your
favorite channels directly from your TV
screen.
1
4
7
2
5
8
0
3
6
9
Number buttons
JUMP
PIC MODE
MENU
PIP PROGR
ENTER
FAVORITE
SOUND
RESET
PIP PROGR
FAVORITE
MODE SURROUND
PROGR
VIDEO
TITLE
TV
Press FAVORITE.
1
FAVORITE
b
Press the number button
2
from 1 to 6 to select the
desired channel.
1
1
4
2
5
3
6
b
Tip
•
To program your favorite channels, see Adjusting each channel settings
(PROGRAM SETUP) on page 31.
Advanced Operations
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Wa t ch in g t w o
JUMP
0
p ro g ra m s a t t h e
/
/
/
PIC MODE
MENU
PIP PROGR
ENTER
sa m e t im e
— “ PIP”
V (PIP PROGR +)/
v (PIP PROGR –)
FAVORITE
SOUND
RESET
PIP PROGR
With the Picture-in-Picture (PIP) feature, you
can display a sub screen within the main picture
of different TV programs or video inputs.
MODE SURROUND
Disp la yin g a su b scre e n
Press
.
12
To return to the normal screen
Press
(when displaying the sub screen).
Ad d it io n a l PIP t a sks
To
Press
change a TV program in the sub screen
select a video input in the sub screen
V (PIP PROGR +) or v (PIP PROGR –).
.
.
swap pictures between the main
and sub screens
freeze the sub screen
.
To unfreeze the screen, press the button again.
Tips
•
You can also display the sub screen and exchange pictures between the main and
sub screens using the menu (see Changing the “PIP” setting on page 29).
•
You can change the position of the sub screen (see Changing the “PIP” setting on
page 29).
Notes
•
When you display a video input on the sub screen at a faster/ slower
speed, the picture may be disrupted depending on the VCR type.
•
If you display different color systems on the main screen and the sub
screen, the size of the sub screen may be different and the sub screen
picture may be disrupted. This does not indicate a malfunction of the TV.
18
Advanced Operations
Download from Www.Somanuals.com. All Manuals Search And Download.
PIC MODE
MENU
List e n in g w it h
su rro u n d so u n d
PIP PROGR
ENTER
FAVORITE
SOUND
RESET
PIP PROGR
The surround feature enables you to
enjoy the sound effects of a concert hall
or movie theater.
MODE SURROUND
SURROUND
PROGR
VIDEO
TITLE
TV
Press SURROUND
repeatedly until you
receive the desired
surround sound.
SURROUND: TruSurround
SURROUND: OFF
Select
To
“TruSurround”
“OFF”
listen to the surround sound that spreads out to the rear of a room.
turn off the surround sound.
Tip
• You can also select the surround option using the menu (see Changing the
“SOUND” setting on page 27).
The surround of your TV is categorized as TruSurround.
TM
is a trademark of SRS Labs, Inc. SRS and the SRS symbol are
registered trademarks of SRS Labs, Inc. in the United States and selected foreign
countries. SRS and TruSurround are incorporated under license from SRS Labs,
Inc. and are protected under United States Patent Nos. 4,748,669 and 4,841,572
with numerous additional issued and pending foreign patents.
Advanced Operations 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Op e ra t in g
o p t io n a l
co m p o n e n t s
1
4
7
2
5
8
0
3
6
Number buttons
9
JUMP
You can use the supplied remote to
operate Sony video equipment such as
Beta, 8 mm, VHS, MDP, CD or DVD.
PIC MODE
MENU
PIP PROGR
ENTER
MENU
V/v/B/b/ ENTER
FAVORITE
SOUND
RESET
PIP PROGR
MODE SURROUND
PROGR
VIDEO
VIDEO ?/1
TITLE
Video equipment
operation buttons
Se t t in g u p t h e re m o t e t o w o rk w it h o t h e r
co n n e ct e d e q u ip m e n t
While holding down VIDEO
?/1, press the following
number combinations to
enter the equipment’s code
number (see the chart
below.)
For example, to operate a
Sony 8 mm VCR:
VIDEO
+
0
2
b
Code numbers for Sony video equipment
To control
DVD
Hold dow n VIDEO ?/1 and press
00
01
02
03
04
06
07
VTR1 (Beta)
VTR2 (8 mm)
VTR3 (VHS)
MDP
CD
MD
Notes
•
•
•
If your video equipment is furnished with a COMMAND MODE selector, set this
selector to the same position as the setting code.
If the equipment does not have a certain function, the corresponding button on the
remote will not operate.
When you remove the batteries, the code number may revert to the factory setting.
20
Advanced Operations
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating a VCR using the remote
To
Press
turn on/ off
record
VIDEO ?/1
N while pressing z.
play
N
x
stop
fast forward (M)
rewind the tape (m)
pause
>
.
X
Press again to resume normal playback.
search the picture forward (M)
or backward (m)
> or .during playback. Release to resume
normal playback.
Operating a DVD player using the remote
To
Press
turn on/ off
VIDEO ?/1
play
N
x
stop
pause
X
Press again to resume normal playback.
step through different tracks of a disc
display the title menu
> to step forward or . to step backward.
TITLE
display the menu
MENU while holding down z.
select the menu item
V/v
/
B/b
while holding down z.
Operating an MDP using the remote
To
Press
turn on/ off
play
VIDEO ?/1
N
x
stop
pause
X
Press again to resume normal playback.
step through different tracks of a disc
> to step forward or . to step backward.
Operating a CD/MD using the remote
To
Press
turn on/ off
VIDEO ?/1
play
N
x
stop
pause
X
Press again to resume normal playback.
go to the next/ previous tracks
> or .
go forward (M)/
> or .while holding down N.
backward (m) quickly in a track
Advanced Operations 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad ju st in g Yo u r Se t u p (MENU)
In t ro d u cin g t h e m e n u syst e m
The MENU button lets you open a menu and change the settings of your TV. The
following is an overview of the menu system.
Return icon
PICTURE icon
Name of the current
menu
Guide mark icon
SE TUP
SOUND icon
L ANGUAGE :
P I C ROT A T I
ECO MODE : O
PROGRAM SE
COLOR SYS :
ENGL I SH
PIP icon
Menu level 3
SETUP icon
CH PRESET icon
Menu level 2
Menu level 1
Level 2
Level 1
Level 3/Function
Select the “DRC-MF” mode:
“DRC1250” t “PROGRESSIVE”
Select the picture mode:
“PICTURE”
“DRC-MF”
“PICTURE MODE”
“ADJUST”
“DYNAMIC” t “STANDARD” t “HI-FINE” t
“PERSONAL” t “ADJUST”
Adjust the “PERSONAL” option:
“PICTURE” t “COLOR” t “BRIGHT” t “HUE” t
“SHARP”
Change the picture size.
“WIDE MODE”
“GAME MODE”
“SOUND MODE”
Adjust the picture settings for video games.
Select the sound mode:
“SOUND”
“DYNAMIC” t “DRAMA” t “SOFT” t
“PERSONAL” t “ADJUST”
Adjust the “PERSONAL” option:
“BASS” t “TREBLE” t “BALANCE” t “BBE”*
Select the “SURROUND” mode:
“TruSurround” t “OFF”
“ADJUST”
“SURROUND”
Adjust volume automatically.
“INTELLIGENT
VOL”
Change the position of the sub screen.
“POSITION”
“PIP”
“PIP”
Display a sub screen within the main picture.
Exchange pictures between main screen and sub screen.
“SWAP”
22 Adjusting Your Setup (MENU)
Download from Www.Somanuals.com. All Manuals Search And Download.
Level 3/Function
Level 1
Level 2
Change the menu language:
“LANGUAGE”
“SETUP”
“ENGLISH” t “
” (Thai)
”(Chinese) t “
”(Arabic) t
“
Adjust the picture position.
“PIC ROTATION”
“ECO MODE”
Reduce power consumption of your TV.
Adjust each channel settings.
“PROGRAM
SETUP”
Select the color system:
“COLOR SYS”
“AUTO” t“ PAL” t “SECAM” t “NTSC3.58” t
“NTSC4.43”
Preset channels automatically.
“AUTO
“CH PRESET”
PROGRAM”
Preset channels manually.
“MANUAL
PROGRAM”
Select the TV system:
“TV SYS”
“B/ G” t “I” t “D/ K” t “M”
* The BBE is manufactured by Sony Corporation under license from BBE
Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866.
The word “BBE” and the BBE symbol are the trademarks of BBE Sound, Inc.
continued
Adjusting Your Setup (MENU) 23
Download from Www.Somanuals.com. All Manuals Search And Download.
In t ro d u cin g t h e m e n u syst e m (co n t in u e d )
Ho w t o u se t h e m e n u
Press MENU to display
PIC MODE
MENU
MENU
P I CTURE
PIP PROGR
the menu.
DRC - MF : DRC 1 2 5 0
P I CTURE MODE : DYNAM I C
WI DE MODE : OF F
b
ENTER
GAMENMODEN: OT F PF I C : OF F
FAVORITE
SOUND
RESET
PIP PROGR
MODE SURROUND
PROGR
Press V or v (or B/b)
to select the desired
item.
P I P
POS I T I ON :
P I P : OF F
SWAP
ENTER
b
b
VIDEO
TITLE
P I P
Press ENTER to
confirm your
POS I T I ON :
P I P : OF F
SWAP
ENTER
TV
selection and go to
the next level.
Other menu operations
To
Press
V, v, B or b.
B or b.
Adjust the setting value
Move to the next/ previous menu level
Cancel the menu
MENU.
Tips
•
•
•
If you want to exit from Menu level 2 to Menu level 1, press V or v until
the return icon ( ) is highlighted, then press ENTER.
Some of the menu items can be operated directly using the remote
buttons.
The MENU, ENTER, and SELECT
for the operations above.
buttons on the TV can also be used
/
Front of TV
ENTER
SELECT
AUTO
MENU PROGR
PROGR
Note
•
If more than 60 seconds elapse between entries, the menu screen
automatically disappears.
24 Adjusting Your Setup (MENU)
Download from Www.Somanuals.com. All Manuals Search And Download.
PIC MODE
MENU
Ch a n g in g t h e
“ PICTURE” se t t in g
PIP PROGR
ENTER
MENU
V/v/B/b/ENTER
FAVORITE
SOUND
RESET
PIP PROGR
MODE SURROUND
The “PICTURE” menu allows you to adjust
the picture settings.
Press MENU.
1
2
P I CTURE
DRC - MF : DRC 1 2 5 0
Make sure the “PICTURE”
icon ( ) is selected,
then press ENTER.
P I CTURE MODE : DYNAM I C
ENTER
b
WI DE MODE : OF F
GAME MODE : OF F
Press V or v to select
the desired item
(e.g., “DRC-MF”),
then press ENTER.
P I CTURE
DRC - MF :
P I CTURE MOD PROGRESSIVE
WI DE MODE : O
3
DRC 1 2 5 0
ENTER
ENTER
b
b
GAME MODE : O
Select
To
“DRC-MF”
“PICTURE MODE”
choose either “DRC1250” or “PROGRESSIVE”.
choose either “DYNAMIC”, “STANDARD”, “HI-FINE”,
“PERSONAL”*, or “ADJUST”.
“WIDE MODE”
change the picture size when receiving wide-mode (16:9) picture
signal.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
“GAME MODE”
adjust the picture setting that is suitable to view video games.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
* When the “PERSONAL” mode is selected, you can receive the last
adjusted picture settings from the “ADJUST” option (see page 26).
Notes
•
For details on the options under “DRC-MF” and “PICTURE MODE”, see
pages 16 and 15 respectively.
•
“GAME MODE” is available only when receiving signals through the
t (video input),
(S video input), or
(component video input)
jacks at the front and rear of your TV.
To return to the normal screen
continued
Press MENU.
Adjusting Your Setup (MENU) 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch a n g in g t h e “ PICTURE” se t t in g (co n t in u e d )
Ad ju st in g t h e “ ADJUST” it e m s u n d e r “ PICTURE MODE”
Press V or v to select
the desired item
(e.g.,“COLOR”),
1
ENTER
ENTER
b
b
then press ENTER.
COLOR
80
Adjust the value according to the following table, then press ENTER.
2
3
For
“PICTURE” decrease picture contrast
“COLOR” decrease color intensity
“BRIGHT” darken the picture
Press v or B to
Press V or b to
increase picture contrast
increase color intensity
brighten the picture
increase green picture tones
sharpen the picture
“HUE”*
increase red picture tones
soften the picture
“SHARP”
* You can adjust “HUE” for the NTSC color system only.
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “PERSONAL”.
Tip
•
For details on the menu system and how to use the menu, refer to
Introducing the menu system on page 22.
26 Adjusting Your Setup (MENU)
Download from Www.Somanuals.com. All Manuals Search And Download.
PIC MODE
MENU
Ch a n g in g t h e
“ SOUND” se t t in g
PIP PROGR
ENTER
MENU
V/v/B/b/ENTER
FAVORITE
SOUND
RESET
PIP PROGR
The “SOUND” menu allows you to adjust
the sound settings.
MODE SURROUND
Press MENU.
1
Press V or v to select the
“SOUND” icon ( ),
then press ENTER.
SOUND
2
SOUND MODE : DYNAM I C
SURROUND : OF F
I NT E L L I GENT VOL : OF F
ENTER
ENTER
b
b
Press V or v to select
the desired item (e.g.,
“SOUND MODE”),
then press ENTER.
SOUND
SOUND MODE :
SURROUND : OF DRAMA
I NT E L L I GENT SOF T
3
DYNAM I C
ENTER
ENTER
b
b
PERSONA L
AD J US T
Select
To
“SOUND MODE”
choose either “DYNAMIC”, “DRAMA”, “SOFT”, “PERSONAL”*, or
“ADJUST”.
“SURROUND”
choose either “TruSurround” or “OFF”.
“INTELLIGENT
VOL”
adjust the volume of all TV programs and video inputs
automatically.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
* When the “PERSONAL” mode is selected, you can receive the last
adjusted sound settings from the “ADJUST” option (see page 28).
Note
•
For details on the options under “SOUND MODE” and “SURROUND”,
see pages 15 and 19 respectively.
To return to the normal screen
Press MENU.
continued
Adjusting Your Setup (MENU) 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch a n g in g t h e “ SOUND” se t t in g (co n t in u e d )
Ad ju st in g t h e “ ADJUST” it e m s u n d e r “ SOUND MODE”
Press V or v to select
1
the desired item (e.g.,
“BALANCE”),
ENTER
ENTER
b
b
then press ENTER.
BALANCE
00
Adjust the value according to the following table, then press ENTER .
2
3
For
Press v or B to
Press V or b to
“BASS”
decrease the bass
decrease the treble
increase the bass.
increase the treble.
“TREBLE”
“BALANCE”
increase the left speaker’s
volume
increase the right speaker’s volume.
“BBE”
select “HIGH” for higher enhancement of sound clarity;
select “LOW” for lower enhancement of sound clarity;
select “OFF” to turn off the BBE sound.
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “PERSONAL”.
Tip
•
For details on the menu system and how to use the menu, refer to
Introducing the menu system on page 22.
28 Adjusting Your Setup (MENU)
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch a n g in g t h e
“ PIP” se t t in g
JUMP
0
PIC MODE
MENU
PIP PROGR
ENTER
MENU
The “PIP” menu allows you to display a
sub screen, change the sub screen
position and exchange pictures between
the main and sub screens.
V/v/ENTER
FAVORITE
SOUND
RESET
PIP PROGR
MODE SURROUND
Press MENU.
1
P I P
Press V or v to select the
“PIP” icon ( ), then
press ENTER.
2
POS I T I ON :
P I P : OF F
SWAP
ENTER
ENTER
b
b
b
P I P
Press V or v to select the
desired item (e.g.,
“POSITION”), then
press ENTER.
3
POS I T I ON :
P I P : OF F
SWAP
ENTER
ENTER
b
Select
To
change the position of the sub screen.
“POSITION”
Press V or v to select the desired position, then press ENTER .
display a sub screen within the main picture.
“PIP”
Press V or v to select “ON”, then press ENTER .
To cancel, press
or select “OFF”, then press ENTER .
exchange pictures between the main screen and sub screen.
“SWAP”
To return to the normal screen
Press MENU.
Tip
•
For details on the menu system and how to use the menu, see Introducing
the menu system on page 22.
Adjusting Your Setup (MENU) 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch a n g in g t h e
“ SETUP” se t t in g
1
4
7
2
5
8
0
3
6
Number buttons
9
The “SETUP” menu allows you to
change the menu language, adjust the
picture position, reduce your TV power
consumption, setup your programs and
select the color system.
JUMP
PIC MODE
MENU
PIP PROGR
ENTER
MENU
V/ b/v/B/ENTER
FAVORITE
SOUND
RESET
PIP PROGR
MODE SURROUND
Press MENU.
1
2
SE TUP
Press V or v to select
the “SETUP” icon ( ),
then press ENTER.
L ANGUAGE : ENGL I SH
P I C ROT A T I ON
ENTER
ENTER
b
b
b
b
ECO MODE : OF F
PROGRAM SE TUP
COLOR SYS : AUTO
Press V or v to select
the desired item
(e.g., “COLOR SYS”),
3
SE TUP
L ANGUAGE : EN AUTO
P I C ROT A T I O PA L
ECO MODE : OF SECAM
ENTER
ENTER
then press ENTER.
PROGRAM SE T NT
SC 3 . 5 8
COLOR SYS :
NT SC 4 . 4 3
To
Select
change the menu language (see Changing the menu language on page 13).
“LANGUAGE”
“PIC ROTATION”
adjust the picture position when it is not aligned with the TV screen.
Press V, b,v or B to adjust the picture position, then press ENTER.
ENTER
ENTER
b
b
PIC ROTATION
“ECO MODE”
reduce power consumption of your TV to save energy.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
adjust each channel settings (see Adjusting each channel settings
(PROGRAM SETUP) on page 31).
“PROGRAM
SETUP”
select the color system. Normally, set this to “AUTO”.
“COLOR SYS”
To return to the normal screen
Press MENU.
30 Adjusting Your Setup (MENU)
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad ju st in g e a ch ch a n n e l se t t in g s (PROGRAM SETUP)
Select “PROGRAM SETUP” from the “SETUP” menu.
1
2
Select “PR” and press
PROGRAM SE T UP
PR : 1 4
SK I P : OF F
CH I L D LOCK : OF F
ENTER. Press V or v to
select the desired
channel you want to
adjust, then press ENTER.
ENTER
ENTER
b
b
b
b
F AVOR I T E CH : – –
Press V or v to select
the desired item
(e.g., “SKIP”), then
press ENTER.
PROGRAM SE T UP
3
PR : 1 4
ON
OF F
ENTER
ENTER
SK I P :
CH I L D LOCK :
F AVOR I T E CH
Select
To
select the desired channel.
“PR”
“SKIP”
skip unwanted or unused program number.
Press V or v to select “ON”, then press ENTER.
To cancel, select “OFF”, then press ENTER.
“CHILD LOCK”
“FAVORITE CH”
prevent children from watching this selected channel.
Press V or v to select “ON”, then press ENTER.
The lock symbol ( ) appears on the screen.
To cancel, select “OFF”, then press ENTER.
If you preset a locked channel, that channel will be unlocked
automatically.
program six channels for direct selection.
Press V or v to select one of the six favorite channel numbers (if
you decide not to make any changes, select “ ”), then press
ENTER.
To view the selected favorite channel, refer page 17.
To continue adjusting other channels, press V or v to select “PR”, then
repeat step 2 and 3.
4
To return to the normal screen
Press MENU.
Adjusting Your Setup (MENU) 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch a n g in g t h e
Ch a n n e l Pre se t
(“ CH PRESET” )
se t t in g
1
4
7
2
5
8
0
3
6
9
JUMP
PIC MODE
MENU
PIP PROGR
ENTER
MENU
The “CH PRESET” menu allows you to
adjust the setup of your TV. For
example, you can manually tune in a
channel with a weak signal that fails to
be tuned in by automatic presetting.
V/ b/v/B/ENTER
FAVORITE
SOUND
RESET
PIP PROGR
MODE SURROUND
Press MENU.
1
Press V or v to select the
CH PRESE T
2
AUTO PROGRAM
MANUA L PROGRAM
T V SYS : B / G
“CH PRESET” icon (
then press ENTER.
),
ENTER
ENTER
b
b
b
b
Press V or v to select
the desired item (e.g.,
“AUTO PROGRAM”),
then press ENTER.
AUTO PROGRAM
PR : 0 1
T V SYS : AUTO
VHF LOW
3
ENTER
ENTER
Select
To
preset channels automatically.
“AUTO PROGRAM”
“MANUAL PROGRAM”
preset channels manually. See Presetting channels
manually on page 33.
“TV SYS”
select the TV system.
Press V or v to select either “B/ G”, “I”, “D/ K” or “M”, then
press ENTER.
To return to the normal screen
Press MENU.
Tip
•
For details on the menu system and how to use the menu, refer to
Introducing the menu system on page 22.
32 Adjusting Your Setup (MENU)
Download from Www.Somanuals.com. All Manuals Search And Download.
Pre se t t in g ch a n n e ls m a n u a lly
After selecting “MANUAL
PROGRAM”, select the
program number to
which you want to preset
a channel.
1
MANUA L PROGRAM
:
PR
0 6
:
:
T V SYS B / G
ENTER
b
b
SENS H I GH
(1) Make sure “PR” is selected,
VHF LOW
F I NE AUTO
then press ENTER.
:
(2) Press V or v until the
MANUA L PROGRAM
program number you
:
PR
1 0
want to preset (e.g.,
:
:
T V SYS B / G
ENTER
ENTER
b
SENS H I GH
program number
“10”) appears on the
VHF LOW
:
F I NE AUTO
menu, then press ENTER
.
Tip
•
You can also select the
program number with the
PROGR +/ – or number
buttons.
Select the desired channel.
2
3
MANUA L PROGRAM
:
PR
1 0
(1) Press V or v to select
either “VHF LOW”,
“VHF HIGH”,
ENTER
ENTER
:
:
T V SYS B / G
SENS H I GH
b
b
b
b
VHF LOW
:
F I NE AUTO
or “UHF”, then
press ENTER.
MANUA L PROGRAM
:
(2) Press V or v until the
desired channel’s
PR
1 0
:
:
ENTER
ENTER
T V SYS B / G
SENS H I GH
broadcast appears
on the TV screen,
then press ENTER.
VHF LOW
:
F I NE AUTO
If the sound of the
desired channel is
abnormal, select the
appropriate TV system.
MANUA L PROGRAM
:
PR
1 0
B / G
I
D / K
M
:
:
T V SYS
SENS H I G
VHF LOW
F I NE AUTO
ENTER
ENTER
b
b
b
b
(1) Press V or v to
select “TV SYS”,
then press ENTER.
:
MANUA L PROGRAM
:
PR
1 0
:
:
T V SYS
SENS H I GH
VHF LOW
I
(2) Press V or v until
the sound becomes
normal, then
ENTER
ENTER
:
F I NE AUTO
press ENTER.
continued
Adjusting Your Setup (MENU) 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch a n g in g t h e “ CH PRESET” se t t in g (co n t in u e d )
If you are not satisfied with
the picture and sound
quality, you may be able to
improve them by using the
“FINE” tuning feature.
4
MANUA L PROGRAM
:
PR
1 0
T V SYS
AUTO
MANUA L
:
:
(1) Press V or v
I
ENTER
ENTER
ENTER
ENTER
SENS H I G
VHF LOW
b
b
b
b
b
b
to select “FINE”,
then press ENTER.
:
F I NE
MANUA L PROGRAM
(2) Press V or v to select
“MANUAL”, then
press ENTER.
:
PR
1 0
AUTO
MANUA L
:
:
T V SYS
I
ENTER
SENS H I G
VHF LOW
:
F I NE
(3) Press V, v, B or b
until the picture
and sound quality
are optimal, then
press ENTER.
MANUA L PROGRAM
:
PR
1 0
T V SYS
:
:
ENTER
I
SENS H I GH
VHF LOW
F I NE MANUA L
:
The + or – icon on
the menu flashes
while tuning.
If the TV signal is too
strong and the picture is
distorted, you can adjust
the TV reception
5
sensitivity.
MANUA L PROGRAM
:
PR
1 0
T V SYS
SENS
H I GH
LOW
(1) Press V or v to
:
:
I
ENTER
ENTER
select “
then press ENTER.
SENS”,
b
b
b
b
VHF LOW
:
F I NE MANUA L
MANUA L PROGRAM
:
(2) Press V or v to
select “LOW”,
PR
1 0
T V SYS
:
:
ENTER
ENTER
I
SENS LOW
VHF LOW
then press ENTER.
:
F I NE MANUA L
To return to the normal screen
Press MENU.
Notes
•
The TV system (“TV SYS”), TV reception sensitivity (“
SENS”) and fine
tuning (“FINE”) settings are memorized for each program number.
•
If you preset a locked channel (“CHILD LOCK”), that channel will be
unlocked automatically (see page 31).
34 Adjusting Your Setup (MENU)
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad d it io n a l In fo rm a t io n
Se lf-d ia g n o sis fu n ct io n
Your TV is equipped with a self-diagnosis function. If there is a
problem with your TV, the 1 (standby) indicator flashes red. The
number of times the 1 indicator flashes indicates the possible
causes.
Front of TV
1 indicator
L(MONO)
4
R
ENTER
SELECT
AUTO
MENU PROGR
PROGR
Check that the 1 indicator flashes red a number of times between 3-second
intervals.
1
Count the number of times the 1 indicator flashes.
2
3
4
Press ! (main power) to turn off your TV.
Inform your nearest Sony service center about the number of times the
1 indicator flashed.
Be sure to note the model name and serial number located on the rear of
your TV.
Additional Information 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Tro u b le sh o o t in g
If you have any problem while viewing your TV, you can either use the Reset function or
check the Troubleshooting guide below. If the problem persists, contact your Sony dealer.
Reset function
Press the RESET button on your remote control.
Your TV will go blank for about half a second
then the picture will reappear with “RESET”
PIC MODE
MENU
PIP PROGR
ENTER
displayed on your TV screen for about 10 seconds.
Pressing RESET will set your TV to the factory
setting, but certain problems may be solved.
FAVORITE
RESET
RESET
PIP PROGR
Troubleshooting guide
Possible cause
Symptom
Solutions
Page
• The connection is
loose or the cable is
damaged.
•
•
Check the antenna cable and
connection on the TV, VCR and at the
wall.
Snow y picture
4
Display the “CH PRESET” menu and
select “MANUAL PROGRAM” to
preset the channel again.
33
• Channel presetting
is inappropriate or
incomplete.
Noisy sound
• The antenna type is
inappropriate.
•
•
Check the antenna type (VHF/ UHF).
Contact a Sony dealer for advice.
–
–
• The antenna
direction needs
adjustment.
Adjust the antenna direction. Contact
a Sony dealer for advice.
–
• Signal transmission is
low.
•
•
Try using a booster.
• Broadcast signals
are too strong.
Display the “CH PRESET” menu and
select “MANUAL PROGRAM”.
34
Distorted picture
Then, select “
SENS: LOW”.
–
•
Turn off or disconnect the booster if it
is in use.
Noisy sound
Good picture
•
•
If the sound of all the channels are noisy,
display the “CH PRESET” menu and
select “AUTO PROGRAM” to preset the
channels again.
• The TV system
setting or channel
presetting is
inappropriate or
incomplete.
32
33
If the sound of some channels is noisy,
select the channel, then display the
“CH PRESET” menu and select the
appropriate TV system (“TV SYS”).
Noisy sound
36 Additional Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible cause
Solutions
Page
No picture
• The power cord,
antenna or VCR is
not connected.
•
Check the power cord, antenna and
the VCR connections.
4
• The TV is not turned
on.
•
•
Press ?/1 (power).
11
12
Press ! (main power) on the TV to
turn off the TV for about five
seconds, then turn it on again.
No sound
Good picture
• The volume level is
too low.
•
•
Press ¸ + to increase the volume
level.
12
12
• The sound is muted.
Press % to cancel the muting.
No sound
Dotted lines or
stripes
• There is local
interference from
cars, neon signs, hair
dryers, power
•
•
Do not use a hair dryer or other
equipment near the TV.
–
–
Adjust the antenna direction for
minimum interference. Contact a
Sony dealer for advice.
generators, etc.
Double images or
“ghosts”
–
34
–
•
Broadcast signals are
reflected by nearby
mountains or buildings.
•
•
Use a highly directional antenna.
Use the fine tuning (“FINE”) function.
• The antenna direction
needs adjustment.
•
•
Adjust the antenna direction. Contact
a Sony dealer for advice.
• Use of a booster is
inappropriate.
Turn off or disconnect the booster if it
is in use.
–
No color
• The color level
setting is too low.
•
•
•
Display the “PICTURE” menu and select
“ADJUST” of “PICTURE MODE”, then
adjust the “COLOR” level.
26
•
The color system setting
is inappropriate.
Display the “SETUP” menu and check
the color system (“COLOR SYS”) setting
(usually set this to “AUTO”).
30
–
• The antenna direction
needs adjustment.
Adjust the antenna direction. Contact
a Sony dealer for advice.
continued
Additional Information 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Tro u b le sh o o t in g (co n t in u e d )
Possible cause
Symptom
Page
Solutions
Abnormal color
• The magnetic
disturbance from
–
•
Keep external speakers or other
equipment away from the TV. Do not
move the TV while the TV is turned
on. Press ! (main power) on the TV
to turn off the TV for about five
minutes, then turn it on again.
patches
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.
Picture slant
• The magnetic
disturbance from
•
•
Keep external speakers or other
electrical equipment away from the TV.
–
external speakers or
other equipment, or
the direction of the
earth’s magnetic field
may affect the TV.
Display the “SETUP” menu and adjust
“PIC ROTATION” so that the picture is
aligned to the TV screen.
30
•
•
Use the fine tuning (“FINE”) function.
34
35
Lines moving across • There is interference
the TV screen.
from external sources,
e.g., heavy
machineries, nearby
broadcast station.
Contact your nearest Sony service
center.
• Your TV may need
servicing.
The 1 indicator on
your TV flashes red
a number of times
betw een 3-second
intervals.
•
Some shooting games
which involve pointing
a light beam at the TV
screen with an
Cannot play
shooting games.
electronic gun or rifle
cannot be used with
your TV. For detail, see
the instruction manual
supplied with the
–
—
video game software.
TV cabinet creaks.
•
Changes in room
temperature sometimes
make the TV cabinet
expand or contract,
causing a noise. This
does not indicate a
malfunction.
–
–
—
—
A small “boom”
sound is heard
w hen the TV is
turned on.
• The TV’s
demagnetizing
function is working.
This does not indicate
a malfunction.
38 Additional Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Ove rvie w o f co n t ro ls
TV fro n t p a n e l
L(MONO)
4
R
ENTER
SELECT
AUTO
MENU PROGR
PROGR
L(MONO)
R
ENTER
SELECT
AUTO
MENU PROGR
4
PROGR
Button
Function
Page
5
Preset channels automatically.
AUTO PROGR
Turn off completely or
turn on the TV.
11
!
Select program number.
Standby indicator.
Adjust volume.
11
11
12
12
14
24
–
PROGR +/–
1
2 +/–
t
Select TV or video input.
Wake Up indicator.
Display the menu.
Headphone jack.
MENU
i
continued
Additional Information 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Ove rvie w o f co n t ro ls (co n t in u e d )
Re m o t e co n t ro l
The names/ symbols of buttons on the remote are
indicated in different colors to represent the available
functions.
DRC-MF
Label color
White
Button function
For general TV operations
Green
For Teletext operations
For PIP operations
Yellow
1
4
7
2
5
8
0
3
6
Button
Page
Function
Turn off temporarily or
turn on the TV.
11
?/1
9
Select program number.
Input numbers.
11
11
12
12
12
12
12
12
PROGR +/–
0 – 9, -
JUMP
Display on-screen information.
Mute the sound.
PIC MODE
MENU
%
PIP PROGR
ENTER
Display the TV program.
Select TV or video input.
Adjust volume.
a
t
2 +/–
FAVORITE
SOUND
RESET
Jump to previous channel.
JUMP
Timer operations
PIP PROGR
MODE SURROUND
Set TV to turn on automatically.
Set TV to turn off automatically.
Select sound mode.
14
14
15
15
16
PROGR
SOUND MODE
PIC MODE
DRC-MF
Select picture mode.
Select DRC-MF mode.
VIDEO
Favorite Channel operations
FAVORITE
Display favorite channels.
17
17
TITLE
Select desired channel.
1 – 6
PIP operations
Display a sub screen.
18
18
TV
V (PIP PROGR +) /
v (PIP PROGR –)
Change programs in the sub
screen.
Select video input for the sub
screen.
18
Swap main and sub screens.
Freeze the sub screen.
18
18
40 Additional Information
Download from Www.Somanuals.com. All Manuals Search And Download.
Button
Page
Function
DRC-MF
Select surround mode.
19
SURROUND
Stereo/bilingual operations
(not used for KV-EX34M87/EX29M87)
Select stereo/ bilingual mode.
–
A/B
Teletext operations
1
4
7
2
5
8
0
3
6
9
(not used for KV-EX34M87/EX29M87)
Display Teletext broadcast.
–
–
–
–
–
–
Display Teletext service contents.
Stop Teletext display from scrolling.
Reveal concealed information.
Enlarge the Teletext display.
JUMP
Show TV screen while waiting
for Teletext page.
PIC MODE
MENU
Input Teletext page number.
Display the next or previous page.
–
–
0 - 9
PIP PROGR
ENTER
PROGR +/–
Access a FASTEXT menu.
–
(red, green,
yellow, blue)
FAVORITE
SOUND
RESET
Optional components operations
PIP PROGR
Power.
21
21
21
21
21
21
21
21
VIDEO ?/1
MODE SURROUND
Display the title menu.
TITLE
PROGR
Play.
N
Fast forward/ Search forward.
>
.
z
Rewind/ Search backward.
Record.
Stop.
VIDEO
x
X
Pause.
TITLE
Menu operations
MENU
Display the menu.
24
24
24
36
Select and adjust items.
Confirm selected items.
Set TV to factory setting.
V, v, B, b
TV
ENTER
RESET
Additional Information 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Sp e cifica t io n s
KV-EX29M87
KV-EX34M87
Note
Pow er requirements
110-240 V AC, 50/ 60 Hz
Pow er consumption (W) Indicated on the rear of the TV
Television system
Color system
B/ G, I, D/ K, M
PAL, PAL 60, SECAM, NTSC4.43, NTSC3.58
Channel coverage
B/G
VHF : E2 to E12 / UHF : E21 to E69 / CATV : S01 to
S03, S1 to S41
UHF : B21 to B68 / CATV : S01 to S03, S1 to S41
I
VHF : C1 to C12, R1 to R12 / UHF : C13 to C57, R21
to R60 / CATV : S01 to S03, S1 to S41, Z1 to Z39
D/K
VHF : A2 to A13 / UHF : A14 to A79/
M
CATV : A-8 to A-2, A to W+4, W+6 to W+84
75-ohm external terminal
8 (Antenna)
Audio output (Speaker)
3D WOOFER
6W + 6W
15W
Number of terminal
(Video)
Input: 4 Output: 1
Phono jacks; 1 Vp-p, 75 ohms
(Audio)
Input: 4 Output: 1
Input: 2
Phono jacks; 500 mVrms
Y: 1 Vp-p, 75 ohms,
(S Video)
unbalanced, sync negative
C: 0.286 Vp-p, 75 ohms
Input: 1
Phono jacks;
Y: 1 Vp-p, 75 ohms,
sync negative
(Component
Video)
C
C
B: 0.7 Vp-p, 75 ohms
R: 0.7 Vp-p, 75 ohms
Audio: 500 mVrms
Output: 1
Stereo minijack
i (Headphone)
Picture tube
29 in.
34 in.
86
72
Measured diagonally
Measured diagonally
Tube size (cm)
68
772 × 603 × 516
56
80
Screen size (cm)
Dimensions (w /h/d, mm)
Mass (kg)
895 × 700 × 590
84
Design and specifications are subject to change without notice.
Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|