3-866-564-12(1)
Color Rear Video Projector
Operating Instructions
KP-48V80
KP-53V80
KP-61V80
© 1999 by Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
frequency energy and, if not installed and used in
accordance w ith the instructions, may cause harmful
interference w ith radio communications. How ever,
there is no guarantee that interference w ill not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, w hich can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
follow ing measures:
CAUTION
WARNING
When using TV games, computers and similar products
w ith your projection TV, or view ing a TV station w hose
logo alw ays stays on the screen, keep the brightness
and contrast functions at low settings. If a fixed (non-
moving) pattern such as a station logo is left on the
screen for long periods of time, especially at a high
brightness or contrast setting, the image can be
permanently imprinted onto the screen. These types of
imprints are not covered by your w arranty because
they are the result of misuse.
To prevent fire or shock
hazard, do not expose the TV
to rain or moisture.
CAUTION
•
•
Reorient or relocate the receiving antennas.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Increase the separation betw een the equipment and
receiver.
No t e o n Ca p t io n Visio n
ATTENTION
•
•
Connect the equipment into an outlet on a circuit
different from that to w hich the receiver is
connected.
This television receiver provides display of television
closed captioning in accordance w ith §15.119 of the
FCC rules.
RISQUE DE CHOC ELECTRIQUE,
NE PAS OUVRIR
Consult the dealer or an experienced radio/TV
technician for help.
PRECAUCION
No t e o n co n ve rg e n ce a d ju st m e n t
Before you use your projection TV, make sure to adjust
convergence. For details, see page 20.
RIESGO DE CHOQUE ELECTRICO
NO ADRIR
NO ABRIR
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
No t e t o CATV syst e m in st a lle r
(
)
DO NOT REMOVE COVER OR BACK .
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
NO USER-SERVICEABLE PARTS INSIDE.
This document is for the remote control RM-Y905
MODELS: KP-48V80, KP-53V80, KP-61V80
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Please keep this notice w ith the instruction manual.
This symbol is intended to alert the user to
the presence of uninsulated “dangerous
voltage” w ithin the product’s enclosure that
may be of sufficient magnitude to constitute
a risk of electric shock to persons.
As an ENERGY STAR Partner,
Sony Corporation has
determined that this product
meets the ENERGY STAR
Use of this television receiver for other than private
view ing of programs broadcast on UHF or VHF or
transmitted by cable companies for the use of the
general public may require authorization from the
broadcaster/cable company and/or program ow ner.
guidelines for energy efficiency.
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
NOTIFICATION
ATTENTION
This equipment has been tested and found to comply
w ith the limits for a Class B digital device pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
Pour prévenir les chocs électriques, ne pas utiliser cette
fiche polarisée avec un prolongateur, une prise de
courant ou une autre sortie de courant, sauf si les
lames peuvent être inserées à fond sans en laisser
aucune partie à decouvert.
CAUTION
To prevent electric shock, do not use this polarized AC
plug w ith an extension cord, receptacle or other
outlet unless the blades can be fully inserted to
prevent blade exposure.
equipment generates, uses, and can radiate radio
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
MUTING
POWER
(pages 21, 52, 53)
Ge t t in g t o kn o w t h e b u t t o n s o n t h e
re m o t e co n t ro l
(page 21)
In the instructions that follow, we will
refer to the buttons on your remote control.
Keep this flap unfolded and use this page
for reference.
FUNCTION
PICTURE
MODE
DVD/
SAT/
MUTING
POWER
TV
VTR CABLE
(pages 21, 51-53)
Names of the buttons on the remote control are
presented in different colors to represent the
available functions.
(pages 21, 30)
FUNCTION
TV/VIDEO
PICTURE
MODE
DVD/VTR SAT/CABLE
TV
(page 22)
DISPLAY
ANT
TV/VIDEO
ANT
(pages 23, 31)
Button color
(page 23)
1
4
2
3
6
Black ................ Press to select the component
you want to control; e.g. VTR
(VCR)/ MDP/ DVD Player,
SAT (satellite receiver)/
CABLE, or projection TV.
Green ............... Buttons relevant to power
operations, like turning the
projection TV, SAT/ CABLE, or
VTR (VCR)/ MDP/ DVD Player
on or off
0–9 buttons
DISPLAY
5
8
0
(page 21)
(page 22)
ENTER
7
9
JUMP
(page 21)
JUMP
ENTER
(page 22)
CHANNEL INDEX/
PIP/P&P/ACTIVE
(pages 24-28)
ACTIVE
AUDIO
(
pages 25, 27)/
AUDIO
FREEZE
GUIDE
FREEZE (pages 22,
25, 27, 28)/
GUIDE (page 53)
MENU (page 29)
INDEX
INDEX
SYSTEM OFF
(
for SAT, page 53)
VOL
MENU
CH
(page 23)
DVD/
SAT/
MUTING
POWER
TV
VTR CABLE
VOL +/–
Label color
White ............... TV/ VTR (VCR)/ MDP/ DVD
VCR/DVD/MDP
operation
buttons
(page 21)
FUNCTION
DVD/VTR SAT/CABLE
SYSTEM
OFF
RESET
TV
RESET
(pages 24,
30, 31)
CH +/– (page 21)
Player/ SAT (satellite receiver)
CABLE operation buttons
/
VTR123DVD/MDP
CODE SET
TV/VTR
REC
(page 52)
Joystick
Yellow .............. PIP, P&P, and CHANNEL
INDEX operation buttons
Blue .................. SAT operation buttons
Green ............... S-Link operation buttons
(page 18)
CODE SET
AUDIO
SLEEP
SWAP
DVD MENU
TITLE
(pages 51, 53)
VTR 1/2/3/
DVD/MDP
(pages 39, 51,
52)
CC (page 23)
CC
DVD
TV
SLEEP(page 23)
operation
MTS/SAP
POSITION
Pink .................. DVD Player operation buttons
buttons
MTS/SAP
(page 52)
For a detailed explanation of most buttons, see
“Watching the TV” on page 21.
ACTIVE
(pages 23, 31)
SWAP
POSITION
AUDIO
FREEZE
GUIDE
(pages 25, 27)
INDEX
(page 24)
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Connecting a camcorder ..................... 10
Connecting two VCRs for tape
editing ............................................... 11
Connecting a DVD Player .................. 12
Connecting a DVD Player with
Welcome! ........................................ 1
Using This Manual .......................... 2
Precautions ...................................... 2
Using Your New Projection TV .... 21
Watching the TV ........................................ 21
Watching Two Programs at One Time
— PIP ................................................. 24
component video output
Watching Two Programs at One Time
— P&P (Twin ViewTM) ..................... 26
Installing and Connecting the
Projection TV....................... 3
connectors ........................................ 12
Connecting an AV receiver ................. 13
Connecting an audio system ............. 14
Connecting a Sony SAVA series
Using CHANNEL INDEX ........................ 28
Carrying Your Projection TV ...................... 3
Installing the Projection TV ........................ 3
Connector Types .......................................... 4
Making Connections ................................... 4
Adjusting Your SET UP (menus)... 29
Learning Menu Selection .......................... 29
Using the Video Menu ......................... 30
Using the Audio Menu ........................ 31
Using the Timer Menu ........................ 33
speaker system ................................ 14
Connecting an amplifier that supports
Dolby Pro Logic decoder ............... 15
Using the S-Link Function ........................ 16
Connecting directly to a cable or an
antenna ............................................... 4
Cable or antenna .................................... 5
Cable and antenna ................................. 5
Connecting a cable box ......................... 5
Cable box and cable .............................. 5
Connecting a cable TV system/
antenna to a VCR .............................. 6
Connecting a VCR and projection TV
to a cable box ..................................... 6
Connecting a satellite receiver (SAT).. 7
Connecting a satellite receiver (SAT)
and a VCR .......................................... 8
Connecting a DTV (digital television)
receiver ............................................... 9
Using the S-Link function without a
Sony AV receiver ............................. 16
Using the S-Link function with
ch
Using the Channel Set Up Menu ...... 34
Setting and Selecting Favorite Channel.. 36
Using the Set Up Menu ...................... 38
Using the Parental Control Feature ......... 40
a Sony AV receiver .......................... 17
Basic Set Up ................................... 18
Using the Remote Control ........................ 18
Activating the Parental Control
Feature .............................................. 40
Selecting a Custom Rating in
U.S.A. ................................................ 42
Selecting a Custom Rating
Setting Up the Projection TV
Automatically ................................... 19
Adjusting the Convergence Automatically
(FLASH FOCUS) .............................. 20
in Canada ......................................... 45
Changing the Password ..................... 46
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome!
•
•
Two Y/ PB/ PR inputs for DVD Player and
DTV receiver connections.
What the Ratings Mean ............................... 47
Thank you for purchasing the Sony Color
Rear Video Projection TV.
Ratings in U.S.A. ................................. 47
Ratings in Canada .............................. 49
Three AUDIO/ VIDEO/ S VIDEO inputs.
This manual is for models KP-48V80, KP-
53V80 and KP-61V80.
Manufactured under license from Dolby
Laboratories Licensing Corporation.
Operating Video Equipment ........... 51
Model KP-53V80 is used for illustration
purposes.
Setting the Manufacturer's Code ................ 51
Additionally licensed under Canadian patent
number 1,037,877. “Dolby,” the double-D symbol
a, “Pro Logic,” “VIRTUAL DOLBY and
DIGITAL”are trademarks of Dolby Laboratories
Licensing Corporation.
The features you will enjoy include:
Operating a Cable Box or Satellite
Receiver (SAT)........................... 53
•
FLASH FOCUS, allowing you to adjust
convergence automatically.
Setting the Manufacturer's Code ................ 53
•
Parental Control, enabling you to block
programs that you feel are unsuitable for
your children.
Picture & Picture (P&P) (Twin ViewTM),
allowing you to view two channels
simultaneously both in a reduced size.
SRS (r) (SOUND RETRIEVAL SYSTEM)
Troubleshooting .............................. 54
Specifications ................................... 56
Index ................................................. 57
The SRS (r) (SOUND RETRIEVAL SYSTEM) is
manufactured by Sony Corporation under license
from SRS Labs, Inc. It is covered by U.S. Patent
No. 4,748,669. Other U.S. and foreign patents
pendeing.
•
•
Picture-in Picture (PIP), allowing you to
view another TV channel, video or cable
image as a window picture.
The word SRS and the SRS symbol (r) are
registered trademarks of SRS Labs, Inc.
•
•
CHANNEL INDEX, allowing you to view
and choose from twelve programs
Ow ner’s Record
Favorite Channel, allowing you to
view and choose from eight of your
favorite channels
S-LinkTM, allowing you to control some
operations of your projection TV by other
Sony components.
The model and serial numbers are located at the rear of
the projection TV, below the Sony logo, on the sticker,
and also on the TV box (w hite label). Record these numbers
in the spaces provided below . Refer to them w henever
you call upon your Sony dealer regarding this product.
•
Model No.
Serial No.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Using This Manual
Precautions
We recommend that you carefully review
Sa fe t y
No t e o n cle a n in g
the contents of the following four sections in
the order provided to ensure that you fully
understand the operation of your new
projection TV.
•
•
Operate the projection TV only on 120 V
AC.
Clean the cabinet of the projection TV with a
dry soft cloth. To remove dust from the
screen, wipe it gently with a soft cloth.
Stubborn stains may be removed with a cloth
slightly dampened with solution of mild soap
and warm water. Never use strong solvents
such as thinner or benzine for cleaning.
The plug is designed, for safety purposes,
to fit into the wall outlet only one way. If
you are unable to insert the plug fully into
the outlet, contact your dealer.
1 Installing and Connecting the Projection
TV
This section guides you through your
initial set up. It shows you how to install
your projection TV, to connect your new
components and to connect to the
antenna and cable.
•
•
If any liquid or solid object should fall
inside the cabinet, unplug the projection
TV immediately and have it checked by
qualified service personnel before
operating it further.
If the picture becomes dark after using the
projection TV for a long period of time, it may
be necessary to clean the inside of the
projection TV. Consult qualified service
personnel.
2 Basic Set Up
This section teaches you the basic skills
needed to operate your new projection
TV, including Auto Set Up. It shows you
how to operate the remote control’s
special functions.
If you will not be using the projection TV
for several days, disconnect the power by
pulling the plug itself. Never pull on the
cord.
3 Using Your New Projection TV
This section shows you how to begin
using your new projection TV. It shows
you how to use your remote control’s
features.
For details concerning safety precautions, see the
supplied leaflet “IMPORTANT SAFEGUARDS.”
4 Adjusting Your Set Up (menus)
This section teaches you how to access
on-screen menus and adjust your
projection TV’s settings.
Instructions in this manual are written for the remote
control. Similar controls may be found on the projection
TV console.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the Projection TV
Re co m m e n d e d vie w in g a re a
(Ve rt ica l)
In st a llin g
Ca rryin g Yo u r Pro je ct io n TV
•
To prevent internal heat buildup, do not
block the ventilation openings.
Carrying the projection TV requires three or
more people.
•
Do not install the projection TV in a hot or
humid place, or in a place subject to
excessive dust or mechanical vibration.
The projection TV has been equipped with
casters for easy movement on a hard surface.
Please move your projection TV using the
casters.
•
•
Avoid operating the projection TV at
temperatures below 5° C (41° F).
If the projection TV is transported directly
from a cold to a warm location, or if the
room temperature changes suddenly, the
picture may be blurred or show poor
color. In this case, please wait a few hours
to let the moisture evaporate before
turning on the projection TV.
In st a llin g t h e Pro je ct io n TV
Re co m m e n d e d vie w in g a re a
(Ho rizo n t a l)
20°
20°
•
To obtain the best picture, do not expose
the screen to direct illumination or direct
sunlight. It is recommended to use spot
lighting directed down from the ceiling or
to cover the windows that face the screen
with opaque drapery. It is desirable to
install the projection TV in a room where
the floor and walls are not of a reflective
material.
60°
60°
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the Projection TV (continued)
S-Lin k/CONTROL S ca b le
Co n n e ct o r Typ e s
Ma kin g Co n n e ct io n s
Sony cable for S-Link and CONTROL S
connections. These features are exclusive to
Sony products and allow greater control of
all Sony equipment.
You may find it necessary to use some of the
following connector types during set up.
Co n n e ct in g d ire ct ly t o a ca b le o r
a n a n t e n n a
Co a xia l ca b le
Standard TV cable and antenna cable
The connection you choose will depend on
the cable found in your home. Newer homes
will be equipped with standard coaxial cable
(see A); older homes will probably have 300-
ohm twin lead cable (see B); still other homes
may contain both (see C).
Push into connection.
Plug Type
No t e :
•
Push into connection.
Screw-on Type
For S-Link and CONTROL S connections,
you can use the combined S-Link/
CONTROL S cable provided with some
Sony video equipment, or you can purchase
a separate S-Link/ CONTROL S cable (RK-
G69HG).
Screw into connection.
Use 75-ohm coaxial cable for improved
picture quality (see A).
S Vid e o ca b le
High quality video cable for enhanced
picture quality
(Rear of
projection TV)
VHF/UHF
A
75-ohm
coaxial cable
Ab o u t t h e CONTROL S OUT ja ck
To control other Sony equipment with the
projection TV's remote control, connect the
CONTROL S IN jack of the equipment to the
CONTROL S OUT jack on the projection TV
with the CONTROL S cable.
• VHF only
Align guides and
push into connection.
or
• VHF/UHF
or
• Cable
Au d io /Vid e o ca b le
Push into connection.
(Rear of
projection TV)
VHF/UHF
B
Video - Yellow
Audio (Left) - White
Audio (Right) - Red
300-ohm tw in
lead cable
(Rear of
projection TV)
• VHF only
or
IN
VIDEO 1 VIDEO 3
VIDEO
4
VIDEO 5
Y
OUT
S
VIDEO
VIDEO
TV
MONITOR AUDIO
• UHF only
or
P
B
R
(VAR/FIX)
CENTER SPEAKER
IN
Some DVD Players and DTV Receivers are
equipped with the following three video
connectors.
P
VIDEO
• VHF/UHF
L
L
L
(MONO)
(MONO)
Antenna connector
AUDIO
R
AUDIO
R
AUDIO
R
40W(NOM)
80W(MAX)16
Y - Green
PB (CB, Cb or B–Y) - Blue
S-LINK
S-LINK
AUDIO
(VAR/FIX)
CONTROL
OUT
S
VIDEO 1 VIDEO 3
VIDEO
IN
4
VIDEO 5
TV
MONITOR
OUT
CONTROL S
OUT
PR (CR, Cr or R–Y) - Red
4
Download from Www.Somanuals.com. All Manuals Search And Download.
C
Ca b le b o x a n d ca b le
75-ohm coaxial cable
(Rear of projection TV)
AUX
(Rear of
projection TV)
VHF/UHF
Some pay cable TV systems use scrambled or
encoded signals requiring a cable box* only for
certain channels (e.g. HBO, SHOWTIME, etc.)
• VHF
and
Coaxial cable
TO CONVERTER
(No connection “TO
CONVERTER” in this case)
*Cable box
(Rear of projection TV)
EAC-66 U/V mixer
(not supplied)
VHF/UHF
Antenna cable
AUX
• UHF
Select Cable or ANT mode by pressing ANT
on the remote control.
Scrambled
300-ohm tw in lead cable
TO CONVERTER
channels
Ca b le o r a n t e n n a
Co n n e ct in g a ca b le b o x
75-ohm coaxial cable
(not supplied)
(Signal)
VHF/UHF
This is the simplest connection. Connection is
made directly from the cable or antenna to
the projection TV.
Some pay cable TV systems use scrambled or
encoded signals that require a cable box* to
view all channels.
CATV cable
(unscrambled channels)
(Rear of projection TV)
Also, set “Cable” to “On” in the Channel Set
Up menu (page 35).
VHF/UHF
Coaxial cable
For this set up, you can switch between
scrambled channels (through your cable box),
and normal (CATV) channels by pressing
ANT on your remote control.
(Rear of projection TV)
VHF/UHF
Coaxial cable
Ca b le a n d a n t e n n a
You may find it convenient to use the
following set up if your cable provider does
not feature local channels that you are able to
receive using an antenna.
No t e s:
•
You may be able to program your Sony
remote control to operate your cable box.
(see “Operating a Cable Box or Satellite
Receiver (SAT)” on page 53)
IN
OUT
*Cable box
•
During PIP, P&P, CHANNEL INDEX or
Favorite Channel viewing, the AUX input
can only be viewed in the main picture.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the Projection TV (continued)
Disconnect all pow er sources before making any connections.
(Rear of projection TV)
Co n n e ct in g a ca b le TV syst e m /
a n t e n n a t o a VCR
IN
VIDEO
AUX
VIDEO 1 VIDEO 3
4
VIDEO 5
1 Attach the coaxial cable from the
incoming cable connection or antenna to
VHF/ UHF IN on the VCR.
Y
OUT
MONITOR AUDIO
S
VIDEO
VIDEO
TO
TV
CONVERTER
P
B
R
(VAR/FIX)
P
VIDEO
Coaxial cable
L
L
L
(MONO)
(MONO)
VHF/UHF
2
AUDIO
R
AUDIO
R
AUDIO
R
2 Using a coaxial cable, connect VHF/ UHF
OUT on the VCR to VHF/ UHF on the
projection TV.
VCR
S VIDEO
S-LINK
-LINK
AUDIO
R
AUDIO
L
VIDEO
AUDIO
LINE
IN
VIDEO 1 VIDEO 3
VIDEO
IN
4
VIDEO
5
TV
MONITOR (VAR/FIX)
OUT
VHF/UHF
OUT
LINE
OUT
IN
Cable/
Antenna
3 Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right**).
VIDEO
AUDIO-L
AUDIO-R
VMC-810S/820S
(not supplied)
1
S VIDEO
YC-15V/30V
(not supplied)
3
Coaxial cable
(Rear of projection TV)
Co n n e ct in g a VCR a n d p ro je ct io n
TV t o a ca b le b o x
1 Connect the single (input) jack of the
splitter to the incoming cable connection,
and connect the other two (output) jacks
(using the coaxial cable) to IN on the cable
box and VHF/ UHF on the projection TV.
1
IN
Cable/
Antenna
AUX
VIDEO 1 VIDEO 3
VIDEO
4
VIDEO 5
Y
OUT
MONITOR AUDIO
S
VIDEO
VIDEO
Splitter
TO
TV
CONVERTER
P
B
(VAR/FIX)
(not supplied)
PR
VIDEO
L
L
L
(MONO)
(MONO)
VHF/UHF
AUDIO
AUDIO
R
AUDIO
R
VCR
S
VIDEO
AUDIO
R
AUDIO
L
VIDEO
S-LINK
S-LINK
LINE
IN
VHF/UHF
AUDIO
(VAR/FIX)
2 Using a coaxial cable, connect OUT on the
VIDEO 1 VIDEO 3
VIDEO
IN
4
VIDEO 5
TV
MONITOR
OUT
OUT
IN
2
LINE
OUT
cable box to VHF/ UHF IN on the VCR.
VIDEO
AUDIO-L
AUDIO-R
3 Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
S VIDEO
VMC-810S/820S
(not supplied)
YC-15V/30V
OUT
IN
Cable box
(not supplied)
3
AUDIO Right**).
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnect all pow er sources before making any connections.
No t e :
To view scrambled channels through the
•
cable box, select the video input which the
cable box is connected to by pressing TV/
VIDEO.
* If your VCR is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO
cable.
** If you are connecting a monaural VCR, connect
only the single audio output to the left (MONO)
input on the projection TV.
(Rear of projection TV)
Cable/
Co n n e ct in g a sa t e llit e re ce ive r
(SAT)
Antenna
IN
VIDEO
Satellite antenna
AUX
VIDEO 1 VIDEO 3
4
VIDEO 5
cable
Y
OUT
MONITOR AUDIO
S
VIDEO
VIDEO
TO
1 Connect the cable from the satellite
TV
CONVERTER
PB
(VAR/FIX)
2
1
antenna to the satellite receiver.
PR
VIDEO
L
L
L
(MONO)
(MONO)
VHF/UHF
2 Attach the coaxial cable from the incoming
cable connection or antenna to VHF/ UHF
on the projection TV.
AUDIO
R
AUDIO
R
AUDIO
R
SAT
SATELLITE IN
VHF/UHF
S-LINK
S-LINK
AUDIO
AUDIO
R
AUDIO
L
VIDEO
S
VIDEO IN
VIDEO 1 VIDEO 3
VIDEO
IN
4
VIDEO
5
TV
MONITOR (VAR/FIX)
OUT
OUT
LINE OUT
3 Using AUDIO and S VIDEO cables,
connect AUDIO and S VIDEO OUT on the
satellite receiver to AUDIO and S VIDEO
IN on the projection TV (White-AUDIO
Left, Red-AUDIO Right).
S VIDEO
AUDIO-L
AUDIO-R
RK-74A (not supplied)
YC-15V/30V (not supplied)
3
No t e :
•
To view input from the satellite receiver,
select the video input which the satellite
receiver is connected to by pressing TV/
VIDEO on the remote control.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the Projection TV (continued)
Disconnect all pow er sources before making any connections.
Co n n e ct in g a sa t e llit e re ce ive r
(SAT) a n d a VCR
1 Connect the cable from the satellite
(Rear of projection TV)
Coaxial cable
antenna to the satellite receiver.
3
IN
AUX
VIDEO 1 VIDEO 3
VIDEO
4
VIDEO 5
2 Attach the coaxial cable from the
incoming cable connection or antenna to
VHF/ UHF IN on the VCR.
SAT
Y
OUT
MONITOR AUDIO
S
VIDEO
VIDEO
TO
TV
CONVERTER
P
B
SATELLITE IN
(VAR/FIX)
VHF/UHF
P
R
VIDEO
AUDIO
R
AUDIO
L
VIDEO
S
VIDEO
OUT
L
L
LINE
OUT
L
(MONO)
(MONO)
IN
VHF/UHF
3 Using a coaxial cable, connect VHF/ UHF
OUT on the VCR to VHF/ UHF on the
projection TV.
AUDIO
R
AUDIO
R
AUDIO
R
1
S-LINK
LINK
AUDIO
VIDEO 1 VIDEO 3
VIDEO
IN
4
VIDEO
5
TV
MONITOR (VAR/FIX)
OUT
Satellite
antenna
cable
YC-15V/
30V
4 Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
satellite receiver to AUDIO and S VIDEO
IN on the VCR.
4
(not
VIDEO
AUDIO-L
AUDIO-R
S VIDEO
supplied)
VMC-810S/820S
(not supplied)
S VIDEO
AUDO
R
AUDO
L
VIDEO
LINE
IN
5 Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right).
VHF/UHF
OUT
LINE
OUT
IN
VCR
5
2
VMC-810S/820S (not supplied)
YC-15V/30V (not supplied)
* If your VCR is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO
cable.
Cable/
Antenna
No t e :
•
To view input from the satellite receiver or
VCR, select the video input which your
satellite receiver or VCR is connected to
by pressing TV/ VIDEO on the remote
control.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnect all pow er sources before making any connections.
Co n n e ct in g a DTV (d ig it a l
t e le visio n ) re ce ive r
2
Before connecting, be sure to read the
Operating Instructions of the DTV receiver.
Y
PB
PR
1 Attach the coaxial cable from the roof
antenna to VHF/ UHF on the DTV
receiver.
VMC-10HG (not supplied)
(Rear of projection TV)
IN
VIDEO
DTV receiver
AUX
VIDEO 1 VIDEO 3
4
VIDEO 5
2 Using three yellow VIDEO cables,
connect Y, PB and PR of VIDEO OUT on
the DTV receiver to Y, PB and PR of
VIDEO 4 or 5 IN on the projection TV.
Y
OUT
MONITOR AUDIO
S
VIDEO
VIDEO
TO
S
VIDEO
VIDEO
TV
CONVERTER
P
(VAR/FIX)
VHF/UHF
(DTV)
PR
VIDEO
1
1
2
2
Y
R
G
DOLBY DIGITAL
AUDIO OUT
(OPTICAL)
L
L
L
(MONO)
(MONO)
L
IN
VHF/UHF
(MONO)
AUDIO
R
AUDIO
R
AUDIO
R
PB
HD
VD
DOWN
CONVERTER
ON/OFF
R
OUT
PR
B
3
4
CONTROL S
AUDIO OUT
VIDEO OUT
3 Using an AUDIO cable, connect AUDIO
OUT on the DTV receiver to AUDIO of
VIDEO 4 or 5 IN on the projection TV
(White-AUDIO Left, Red-AUDIO Right).
S-LINK
S-LINK
AUDIO
TV
MONITOR (VAR/FIX)
OUT
VIDEO 1 VIDEO 3
VIDEO
IN
4
VIDEO 5
4
1
AUDIO-L
AUDIO-R
RK-74A (not supplied)
Roof antenna
3
4 Set the DOWN CONVERTER ON/ OFF
switch on the DTV receiver to ON.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the Projection TV (continued)
Disconnect all pow er sources before making any connections.
Co n n e ct in g a ca m co rd e r
Use this connection to view a picture directly
from your camcorder.
YC-15V/30V (not supplied)
1 Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on
the camcorder to AUDIO and S VIDEO
IN inside the drop-down panel on the
front of the projection TV (White-AUDIO
Left, Red-AUDIO Right**).
Audio/
video
VMC-810S/820S
outputs
(not supplied)
S VIDEO
OUT
VIDEO
S VIDEO
AUDIO-L
AUDIO-R
2 Press VIDEO 2 to select the video inputs
AUDIO
R
VIDEO
L
S
VIDEO
(MONO)
from a camcorder.
VIDEO 2 INPUT
* If your camcorder is not equipped with S
VIDEO, use a VIDEO cable (yellow) instead of
the S VIDEO cable.
(Front of projection TV)
Camcorder
** If you are connecting a monaural camcorder,
connect only the single audio output to the left
(MONO) input on the projection TV.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnect all pow er sources before making any connections.
Co n n e ct in g t w o VCRs fo r t a p e
e d it in g
(Rear of projection TV)
By connecting a second VCR to MONITOR
OUT, you can record a program being played
by the primary VCR to the second VCR or
perform tape editing and dubbing.
IN
AUX
VIDEO 1 VIDEO 3
VIDEO
4
VIDEO 5
Y
OUT
S
VIDEO
VIDEO
TO
TV
MONITOR AUDIO
CONVERTER
PB
(VAR/FIX)
PR
VIDEO
1 Connect the VCR intended for playback
using the connection instructions on page
6 of this manual.
L
L
L
(MONO)
(MONO)
VHF/UHF
AUDIO
R
AUDIO
R
AUDIO
R
VCR (for playback)
VCR (for recording)
S-LNK
-LINK
AUDIO
VIDEO 1 VIDEO 3
VIDEO
IN
4
VIDEO
5
TV
MONITOR (VAR/FIX)
OUT
AUDIO
R
AUDIO
L
VIDEO
OUT
AUDIO
R
AUDIO
L
VIDEO
OUT
2 Using an AUDIO/ VIDEO cable, connect
AUDIO and VIDEO IN on the VCR
intended for recording to AUDIO and
VIDEO OUT of MONITOR OUT on the
projection TV.
LINE
OUT
LINE
IN
IN
IN
VIDEO
AUDIO-L
AUDIO-R
AUDIO-R
AUDIO-L
VIDEO
VMC-810S/820S
(not supplied)
VMC-810S/820S
(not supplied)
2
1
No t e s:
•
Do not change the input signal while
editing through MONITOR OUT.
(Rear of projectionTV)
•
When connecting a single VCR to the
projection TV: if VCR LINE OUT is
connected to VIDEO IN on the projection
TV, do not connect MONITOR OUT on
the projection TV to the VCR LINE
INPUT (see right). Doing so will cause
program interference and other viewing
problems.
VIDEO IN
MONITOR
OUT
Indicates direction
of signal
VCR
LINE
IN
OUT
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the Projection TV (continued)
Disconnect all pow er sources before making any connections.
Co n n e ct in g a DVD Pla ye r (Up p e r
illu st ra t io n )
(Rear of projection TV)
S VIDEO
IN
VIDEO
AUX
VIDEO 1 VIDEO 3
4
VIDEO 5
Using an AUDIO and S VIDEO cables,
connect AUDIO and S VIDEO IN on the
projection TV to AUDIO and S VIDEO OUT
on the DVD Player (White-AUDIO Left, Red-
AUDIO Right).
Y
DVD
OUT
MONITOR AUDIO
S
VIDEO
VIDEO
TO
TV
CONVERTER
PB
(VAR/FIX)
LINE OUT
S
VIDEO OUT
S-LINK
DIGITAL OUT
OPTICAL COAXIAL
R–AUDIO 1–L VIDEO
PR
VIDEO
L
L
L
(MONO)
(MONO)
VHF/UHF
A
R
AUDIO
R
AUDIO
R
Audio/S video
outputs
S-LINK
S-LINK
Co n n e ct in g a DVD Pla ye r w it h
co m p o n e n t vid e o o u t p u t
AUDIO
(VAR/FIX)
AUDIO-R
AUDIO-L
VIDEO 1 VIDEO 3
VIDEO
IN
4
VIDEO 5
TV
MONITOR
OUT
co n n e ct o rs (Lo w e r illu st ra t io n )
1 Using an AUDIO cable, connect AUDIO of
LINE OUT on the DVD Player to AUDIO of
VIDEO 4 or 5 IN on the projection TV
RK-74A (not supplied)
Connect the DVD Player
directly to the projection TV.
Connecting the DVD Player
through other video
YC-15V/30V (not supplied)
(White-AUDIO Left, Red-AUDIO Right).
2 Using three yellow VIDEO cables, connect
Y, PB, and PR of COMPONENT VIDEO
OUT on the DVD Player to Y, PB, and PR of
VIDEO 4 or 5 IN on the projection TV.
equipment w ill cause
unw anted picture noise.
Y
PB
PR
VMC-10HG (not supplied)
(Rear of
projection
TV)
No t e s:
IN
VIDEO
AUX
VIDEO 1 VIEO 3
4
VIDEO 5
•
Since the high quality pictures on a DVD
disc contain a lot of information, picture
noise may appear. In this case, adjust “Noise
Reduction” in the Video menu. (see “Noise
Reduction” on page 30)
Y
OUT
MONITOR AUDIO
S
VIDEO
VIDEO
TO
TV
CONVERTER
VHF/UHF
PB
(VAR/FIX)
DVD
PR
VIDEO
LINE OUT
S
VIDEO OUT
CMPONENT VIDEO OT
B-Y RY
S-LINK
DIGITAL OUT
OPTICAL COAXIAL
L
L
L
R–AUDIO 1–L VIDEO
(MONO)
(MONO)
AUDIO
R
ADIO
R
AUDIO
R
•
Some DVD Player terminals may be labeled
differently. If so, connect as follows:
Connect Y (green) to Y.
S-LINK
S-LINK
AUDIO
VIDEO 1 VIDEO 3
VIDEO
IN
4
VIDEO
5
TV
MONITOR (VAR/FIX)
OUT
Connect PB (blue) to CB, Cb or B-Y.
Connect PR (red) to CR, Cr or R-Y.
AUDIO-L
AUDIO-R
RK-74A (not supplied)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnect all pow er sources before making any connections.
Co n n e ct in g a n AV re ce ive r
For greater control of all audio and video
equipment, connect an AV receiver.
(Rear of projection TV)
IN
VIDEO
2
1-2 Perform as described in “Connecting a
cable TV system/ antenna to a VCR” on
page 6.
AUX
VIDEO 1 VIDEO 3
4
VIDEO 5
VIDEO
Y
OUT
MONITOR AUDIO
S
VIDEO
VIDEO
TO
TV
CONVERTER
P
B
R
(VAR/FIX)
P
VIDEO
L
L
L
3 Using a VIDEO cable, connect VIDEO 1 IN
on the projection TV to MONITOR OUT
on the AV receiver.
(MONO)
(MONO)
VHF/UHF
AUDIO
R
AUDIO
R
AUDIO
R
VCR
LINE
IN
S-LINK
S-LINK
VHFUHF
OUT
AUDIO
(VAR/FIX)
VMC-810S/
820S (not
supplied)
VIDEO 1 VIDEO 3
VIDEO
IN
4
VIDEO 5
TV
MONITOR
OUT
LINE
OUT
4 Using an AUDIO/ VIDEO cable, connect
TV OUT on the projection TV to VIDEO 2
IN on the AV receiver.
IN
AUDIO-R
AUDIO-L
VIDEO
1
5 Using an AUDIO/ VIDEO cable, connect
Cable/
Antenna
5
VMC-810S/820S
(not supplied)
the video equipment to the AV receiver.
AUDIO/
VIDEO 2 IN
AUDIO/
VIDEO 1
IN
5
4
3
VMC-10HG
(not supplied)
AV receiver
AUDIO/
VIDEO 1
OUT
MONITOR OUT
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the Projection TV (continued)
Disconnect all pow er sources before making any connections.
Co n n e ct in g a n a u d io syst e m
For more dynamic sound, connect an audio
(Rear of projection TV)
system to the projection TV.
IN
VIDEO
VIDEO 1 VIDEO 3
4
VIDEO 5
1 Using an AUDIO cable, connect AUDIO
(VAR/ FIX) OUT on the projection TV to
one of the unused Line inputs (e.g. Tape-2,
AUX1, etc.) on the stereo.
Y
OUT
MONITOR AUDIO
RK-74A
(not supplied)
S
VIDEO
VIDEO
AUDIO-L
(w hite)
TV
PB
(VAR/FIX)
CENTER SPEAKER
IN
PR
VIDEO
L
L
L
(MONO)
(MONO)
AUDIO
R
AUDIO
R
AUDIO
R
40W(NOM)
80W(MAX)16
2 Set the stereo to the chosen Line input and
use the Audio menu to set the audio
AUDIO-R
(red)
Line inputs
S-LINK
S-LINK
AUDIO
(VAR/FIX)
CONTROL
OUT
S
VIDEO 1 VIDEO 3
VIDEO
IN
4
VIDEO 5
TV
MONITOR
OUT
output and switch the TV’s speakers off.
(see “Audio Out” and “Speaker” on page 32)
No t e :
HRD
•
You can adjust VOLUME, “Bass,”
“Treble,” “Balance,” “MTS/ SAP” and
“Effect” with the supplied remote control.
The control items except VOLUME can be
adjusted only when “Audio Out” is set to
“Variable” in the Audio menu. (see
“Audio Out” on page 32)
Stereo amplifier
(Rear of projection TV)
IN
VIDEO 1 VIDEO 3
VIDEO
4
VIDEO 5
SAVA series
speaker system
Y
OUT
MONITOR AUDIO
S
VIDEO
VIDEO
TV
PB
(VAR/FIX)
CENTER SPEAKER
IN
AUDIO-L
(w hite)
PR
VIDEO
L
L
1 IN L
1 IN R
L
(MONO)
(MONO)
1
Co n n e ct in g a So n y SAVA se rie s
sp e a ke r syst e m
AUDIO
R
AUDIO
R
AUDIO
R
40W(NOM)
80W(MAX)16
S-LINK
S-LINK
AUDIO-R
(red)
AUDIO
CONTROL
OUT
S
Use this connection to control the speaker’s
Dolby Pro Logic surround system and super
woofer mode with the remote control. (see
“Speaker” and “SAVA SP Control” on page
32)
(VAR/FIX)
VIDEO 1 VIDEO 3
VIDEO
IN
4
VIDEO
5
TV
MONITOR
OUT
Audio cord supplied
w ith the speakers
CONTROL S
OUT
RK-G34, etc. (not supplied)
2
CONTROL S IN
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnect all pow er sources before making any connections.
1 Using the AUDIO cable supplied with the
speaker to AUDIO (VAR/ FIX) OUT on
the projection TV.
2 Using the CONTROL S cable, connect
CONTROL S IN on the speaker to
CONTROL S OUT on the projection TV.
Co n n e ct in g a n a m p lifie r t h a t
su p p o rt s Do lb y Pro Lo g ic d e co d e r
(Rear of projection TV)
If you use an amplifier with a Dolby Pro
Logic decoder instead of the projection TV’s
audio system, you can still use the projection
TV’s center speaker.
IN
VIDEO 1 VIDEO 3
VIDEO
4
VIDEO 5
Y
OUT
MONITOR AUDIO
AUDIO-L
(w hite)
S
VIDEO
VIDEO
TV
PB
(VAR/FIX)
CENTER SPEAKER
IN
PR
VIDEO
1 Using the speaker cords (supplied with
the amplifier), connect the speaker
2
L
L
L
(MONO)
(MONO)
AUDIO
R
AUDIO
R
AUDIO
R
40W(NOM)
80W(MAX)16
AUDIO-R
(red)
terminals on the amplifier to CENTER
SPEAKER IN +/ – on the projection TV.
RK-74A
(not supplied)
S-LINK
S-LINK
AUDIO
CONTROL
OUT
S
VIDEO 1 VIDEO 3
VIDEO
IN
4
VIDEO
5
TV
MONITOR (VAR/FIX)
OUT
CENTER
SPEAKER
IN ‘, ’
2 Using an AUDIO cable, connect AUDIO
(VAR/ FIX) OUT on the projection TV to
one of the unused Line inputs (e.g. Tape-
2, AUX1, etc.) on the amplifier (White-
AUDIO Left, red-AUDIO Right).
Line inputs
3
1
Amplifier w ith
Dolby Pro Logic
decoder
3 Set the amplifier to the chosen Line input
and use the Audio menu to set “Speaker”
to “Center” on the projection TV. (see
“Speaker” on page 32)
Rear
Rear
speaker (L)
speaker (R)
Front
speaker (L)
Front
speaker (R)
Woofer
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the Projection TV (continued)
Disconnect all pow er sources before making any connections.
Usin g t h e S-Lin k Fu n ct io n
Refer also to the Operating Instructions
supplied w ith the VCR, satellite receiver,
DVD player, LD player and other Sony
video equipment for details.
S-Link is a Sony innovation designed to
make the Sony components work together. It
allows you to automatically switch the
projection TV’s input mode to video when
you press the play button on the Sony S-Link
VCR.
VMC-10HG
(not supplied)
Y PB PR
1
(Rear of projection TV)
IN
VIDEO
Component video
outputs
VIDEO 1 VIDEO 3
4
VIDEO 5
Usin g t h e S-Lin k fu n ct io n w it h o u t
a So n y AV re ce ive r
Y
S
VIDEO
VIDEO
PB
Audio outputs
P
R
1 Connect the Sony VCR (DVD). (see
“Connecting a cable TV system/ antenna
to a VCR” on page 6 or “Connecting a
DVD Player with component video
output connectors” on page 12)
Sony
LINE OUT
S
VIDEO OUT
CMPONENVIDEO OU
S-LINK
DIGITAL OUT
OPTICAL COAXIAL
L
R–AUO 1–L VIDEO
P
P
L
(MONO)
AUDIO
R
AUDIO
R
DVD
RK-74A
(not supplied)
AUDIO-R
AUDIO-L
-LINK
VIDEO 1 VIDEO 3
VIDEO
IN
VIDEO
5
S-LINK
S-LINK
AUDIO
R
AUDIO
L
VIDEO
S-LINK
Sony VCR
2
LINE
OUT
2 Using an S-LINK cable, connect the
S-LINK jacks on the VCR (DVD) and the
projection TV. Ensure that both ends are
seated firmly and that the projection TV’s
S-LINK jack is in the same row as the
AUDIO/ VIDEO cable extending from the
Sony VCR (DVD).
AUDIO-R
AUDIO-L
VIDEO
S-LINK
RK-G34, etc.
(not supplied)
Audio/video
outputs
S-LINK
1
Audio/video/S-LINK cable
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnect all pow er sources before making any connections.
Usin g t h e S-Lin k fu n ct io n w it h a
So n y AV re ce ive r
Refer also to the Operating
Instructions supplied w ith the VCR,
satellite receiver, DVD player, LD
player and other Sony video
equipment for details.
1 Using a VIDEO cable, connect VIDEO 1
IN on the projection TV to MONITOR
OUT on the Sony AV receiver.
(Rear of projection TV)
IN
VIDEO 1 VIDEO 3
VIDEO
4
VIDEO 5
2 Using an AUDIO/ VIDEO cable, connect
TV OUT on the projection TV to TV
AUDIO and VIDEO IN on the AV
receiver.
Y
OUT
MONITOR AUDIO
S
VIDEO
VIDEO
TV OUT
S-LINK
TV
PB
(VAR/FIX)
2, 4
PR
VIDEO
L
L
L
(MONO)
(MONO)
AUDIO
R
AUDIO
R
AUDIO
R
Audio/video/
S-Link cable
(not supplied)
3 Using an S-LINK cable, connect S-LINK
on the VIDEO 1 IN panel on the
S-LINK
S-LINK
AUDIO
VIDEO 1 VIDEO 3
VIDEO
IN
4
VIDO
5
TV
MONITOR (VAR/FIX)
OUT
VCR 1
projection TV and S-LINK on MONITOR
OUT on the AV receiver.
Video cable
(not supplied)
MONITOR OUT
(video output)
AUDIO
R
AUDIO
L
VIDEO
S-LINK
LINE
OUT
1
3
TV IN
(S-LINK, video/
audio inputs)
Audio/
video
outputs
4 Using an S-LINK cable, connect S-LINK
on the TV OUT panel on the projection
TV to S-LINK on TV IN on the AV
receiver.
MONITOR OUT
S-LINK
RK-G34, etc.
(not supplied)
S-LINK
Sony AV receiver
VCR 2
5 Using AUDIO/ VIDEO and S-LINK
cables, connect the Sony video equipment
to the AV receiver.
AUDIO
R
AUDIO
L
VIDEO
S-LINK
LINE
OUT
VIDEO 1 IN
(S-LINK, video/
audio inputs)
Audio/video/
S-Link cable (not
supplied)
VIDEO 2 IN (S-LINK,
video/audio inputs)
Audio/
video
outputs
5
6 Use the Audio menu to set “Speaker” to
“Off” or “Center.” (see “Speaker” on
page 32)
S-LINK
7 Press CH (CHANNEL) +/ – to activate
the S-Link function.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Set Up
Usin g t h e re m o t e co n t ro l jo yst ick
Ad ju st in g Slid e rs
Usin g t h e Re m o t e Co n t ro l
When menu items present a slider (
), move the joystick up, down, left or
right to adjust the setting.
or
AUDIO
FREEZE
GUIDE
In se rt in g t h e b a t t e rie s
INDEX
Move
VOL
MENU
CH
Insert two size AA (R6) batteries (supplied)
by matching the + and – on the batteries to
the diagram inside the remote control’s
battery compartment.
On Lin e He lp /In st ru ct io n s
.
RESET
Several menu windows will provide
prompts and instructions to assist you in
navigating through the different functions.
Select
The supplied remote control has a joystick
which moves the on-screen selector in four
directions. In most cases, moving the joystick
up, down, left or right will cause the selector
to move in the selected direction.
In some cases, the selector may move in four
directions according to the function. Pressing
No t e s:
•
•
•
Remove the batteries to avoid damage
from possible battery leakage whenever
you anticipate that the remote control
will not be used for an extended period.
down on the center of the joystick (
) will
activate the selected item.
You may also move the joystick right to
activate a selected item. (There are some
exceptions to this option.)
Handle the remote control with care.
Avoid dropping it, getting it wet, or
placing it in direct sunlight, near a heater
or where the humidity is high.
Your remote control can be programmed to
operate most video equipment.
(see “Operating Video Equipment” on
page 51)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the buttons on the front panel and
inside the drop-down panel on the projection
TV:
3 Press CHANNEL + to select English,
CHANNEL – to select Español or
VOLUME + to select Français.
Se t t in g Up t h e Pro je ct io n TV
Au t o m a t ica lly
The AUTO SET UP feature will allow you to
set the on-screen language and set all
receivable channels.
Front panel:
The screen will change to reflect your
choice.
FLASH FOCUS TV/VIDEO
–
VOLUME
+
–
CHANNEL
+
POWER TIMER/STAND BY
–
VOLUME
+
–
CHANNEL
+
E n g l i s h
E s p a ñ o l
F r a n ç a i s
:
[ C H + ]
[ C H – ]
[ V O L + ]
[ V O L – ]
The AUTO SET UP feature does not apply for
installations that use a cable box for all channel
selection.
:
:
A u t o S e t U p
:
Inside the drop-dow n panel:
Primero conecte la
antena.
You can also set up the projection TV manually.
(see “Using the Channel Set Up menu” on pages
34 and 35)
[
]
Oprima SET UP para
salir.
FLASH FOCUS
TV/VIDEO
SET UP MENU
4 Press VOLUME – to continue.
No t e s:
•
•
•
Before you perform AUTO SET UP again,
make sure that the input from ANT (not
AUX) is selected by pressing ANT until
“AUX” does not appear next to the
channel number.
–
VOLUME
+
C o n t i n u e t o
A u t o P r o g r a m
1 Press POWER to turn on the projection
?
Y e s
N o
:
[ C H + ]
[ C H – ]
TV.
:
POWER
Perform this function during the day,
with the antenna and/ or cable properly
connected, to ensure that all available
channels will be broadcasting and
receivable.
(continued)
2 Press SET UP inside the drop-down panel.
The AUTO SET UP screen appears.
When you perform AUTO SET UP, all the
settings in the Video, and Audio menus
are reset to the factory settings.
E n g l i s h
E s p a ñ o l
F r a n ç a i s
:
[ C H + ]
[ C H – ]
[ V O L + ]
[ V O L – ]
:
SET UP
:
A u t o S e t U p
:
First please connect
the antenna.
Press SET UP to exit.
[
]
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Set Up (continued)
Press FLASH FOCUS.
5 Press CHANNEL + to preset channels
automatically.
Ad ju st in g t h e Co n ve rg e n ce
Au t o m a t ica lly (FLASH FOCUS)
FLASH FOCUS
–
CHANNEL
+
The projection tube image appears on the
screen in three layers (red, green and blue). If
they do not converge, the color is poor and
the picture blurs.
A u t o P r o g r a m
The cross pattern appears and FLASH
FOCUS begins to work. The adjustment is
completed when the cross pattern becomes
white.
Before you use your projection TV, be sure to
adjust the convergence.
“Auto Program” appears and the
projection TV starts scanning and
The FLASH FOCUS feature allows you to
adjust the convergence automatically.
presetting channels automatically. While
scanning, the received channel will be
displayed on the sub screen. When all the
receivable channels are stored, the lowest
numbered channel is displayed.
Tips z
•
It is recommended to perform FLASH FOCUS about
30 minutes after the projection TV is first turned on.
•
You can also perform FLASH FOCUS using the Set
Up menu on page 39.
To p e rfo rm AUTO SET UP a g a in
Press SET UP inside the drop-down panel on
the projection TV and perform steps 3-5 on
pages 19 and 20.
Press SET UP again to exit.
No t e :
FLASH FOCUS
•
FLASH FOCUS is canceled if you
perform any other function while FLASH
FOCUS is working.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your New Projection TV
Wa t ch in g t h e TV
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
Many TV features can be accessed directly
through the remote control. The following
chart will explain the function of some
buttons found on your remote control.
Using the White Labeled Buttons for Projection TV Operations
PICTURE MODE
TV (FUNCTION)
TV POWER
Activates the remote control for use with the projection TV.
Turns the projection TV on and off. If a video input indication (e.g., VIDEO 1,
VIDEO 2) appears on the screen, press TV/VIDEO until a channel number
appears.
Press PICTURE MODE repeatedly to directly
choose one of five different video modes that
best suits the program you are watching.
Vivid: Select for enhanced picture contrast and
sharpness.
Standard: Select to display a standard
picture for normal viewing environments.
Movie: Select to display a finely detailed
picture for low light environments.
Use for direct channel selection. Press 0-9 to select a channel (for example,
to select channel 10, press 1 and 0). The channel will change after 2
seconds, or you can press ENTER for immediate selection.
-
0
9
and ENTER
CH +/–
Press to scan through the channels (+ up or – down).
Speed Surf
Personal 1, Personal 2: Select to customize
the “Picture Adjustment” of the Video menu
according to your personal preference.
1
2
Press and hold CH + or – to change the channel number rapidly.
Release to display the desired channel.
VOL +/–
MUTING
Press to adjust the volume (+ up or – down).
When you select “Movie,” “Personal 1” and
“Personal 2,” you can also perform the “Picture
Adjustment” (such as “Brightness,” “Color,” etc.)
to suit your taste. For details, see “Mode” on
page 30.
Press to mute the sound. “Muting” will appear on the screen and will dim
three seconds later. To restore sound, press again or press VOL +.
(continued)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your New Projection TV (continued)
Using the White Labeled Buttons for Projection TV Operations
Press repeatedly to scroll through available video inputs:
TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4 and VIDEO 5.
TV/VIDEO
If you select “Skip” as a “Video Label” in the Set Up menu, your projection
TV will skip the video input you selected. (see “Video Label” on page 39)
Press to alternate or jump back and forth between two channels. The
projection TV will jump between the current channel and the last channel
selected using the 0-9 buttons.
JUMP
This is useful when you need to copy down information that appears on the
TV’s screen.
Press to freeze the desired picture. The frozen picture is displayed on the left
of the screen while viewing the normal picture of the current channel on the
right.
FREEZE
(yellow labeled
button)
Frozen picture
6
Normal motion
picture
Recipe
flour
sugar
salt
butter
-
-
-
-
2
-
-
-
1/2
-
-
-
-
-1/2
- 1
-
-
Press again to display the normal picture.
Press to display the channel number, current time, channel caption (if set),
and MTS mode (if SAP is selected). The SAP indication disappears and the
other indications dim three seconds later.
Tip z
DISPLAY
Some control buttons are located under the cover on the
top of the remote control. They are indicated with
(under the cover) in the table.
To turn the display off, press DISPLAY again.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
Using the White Labeled Buttons for Projection TV Operations
Press repeatedly to scroll through available displays:
CC
XDS (Extended Data Service)
(under the cover)
Displays a network name, program name, program type, program length,
program description, call letters and time of the show if the broadcaster
offers this service.
Caption Vision
Displayed on the screen if the broadcaster offers this service. (see
“Caption Vision” on page 38)
No display
“Off” appears and the display is canceled.
Press repeatedly until the projection TV displays the approximate time in
minutes (30, 60, or 90) that you want the projection TV to remain on before
shutting off automatically.
SLEEP
(under the cover)
Cancel by pressing until “Sleep Off” appears.
Press to change between the VHF/UHF input and the AUX input. (for
detailed connection information, see “Cable and antenna” or “Cable box and
cable” on page 5)
ANT
(AUX input)
Press to scroll through the Multi-channel TV Sound (MTS) options:
Stereo, SAP, Mono and Auto SAP. (see “MTS/SAP” on page 31)
MTS/SAP
(under the cover)
Press to select an audio option:
Trusurround, Simulated and Effect Off. (see “Effect” on page 31)
Press when you are finished using a VCR and you want to switch to the TV
input. The VCR power will remain on.
TV/VTR
(under the cover)
Press to turn off the projection TV and all other equipment connected with S-
Link. (see page 16)
SYSTEM OFF
(under the cover)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your New Projection TV (continued)
Wa t ch in g Tw o Pro g ra m s a t On e Tim e — PIP
The Picture-in-Picture (PIP) feature allows
Using the Yellow Labeled Buttons for PIP Operations
you to view two channels simultaneously,
one in the full size “main” picture and one in
a smaller “window” picture.
Press to display a window picture.
Each time you press this button, the picture size will change
(1/4 n1/9 n1/16 nno display).
You can move the window picture to any
location on the screen.
To close the window picture, press
repeatedly until it disappears.
The symbol “b” or “B”
indicates w hich picture's
TV channel or input
The symbol “≥”
indicates w hich
picture's sound is being
received.
Press to change the location of the window picture (counterclockwise)
around the main picture.
POSITION
(under the cover)
ACTIVE
source can be changed.
TV channel or input-
Press to select either the main or window picture in order to change the
TV channel or video source using the white labeled buttons below. The
symbol “b” (or “B”) will appear to indicate which picture’s channel or input
mode can be changed.
source mode for the
6
Main
picture
main picture* (yellow -
green-colored)
10
TV channel or input-
source mode for the
w indow picture*
(w hite-colored)
To change the location of the window picture, move the joystick in any
direction and release it when the picture is in the desired location.
Window
picture
(white labeled
button)
* It will dim in about 3 seconds.
TV/VIDEO
Press repeatedly to scroll through the available video inputs for the
picture on which the symbol “b” (or “B”) is displayed. (see “TV/VIDEO” on
page 22)
Tip z
(white labeled
button)
If you press RESET in PIP mode, the window picture
will move to the bottom right (factory-preset location).
24
Download from Www.Somanuals.com. All Manuals Search And Download.
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
Using the Yellow Labeled Buttons for PIP Operations
CH
Press to select the TV channel on which the symbol “b” is
displayed. (for details, see “Watching the TV” on page 21)
Speed Surf
JUMP
or
-
or
0
9
1 Press and hold CH + or – to change the channel number rapidly.
2 Release to display the desired channel.
and ENTER
No t e :
(white labeled button)
•
If one of the pictures received through
PIP is snowy, the entire screen may
become unstable. In this case, erase the
snowy channel. (see “Channel Skip/
Add” on page 35)
ANT
Press to change between the VHF/UHF input and the AUX input for the picture on
which the symbol “b” (or “B”) is displayed.
(white labeled
button)
Press to alternate sound between the main picture and the window picture. The
symbol “ ” will appear for a few seconds to indicate which picture’s sound is being
received.
AUDIO
INDEX
This is useful when you need to copy down information of the main picture.
Press to freeze the desired scene in the main picture. The frozen picture is displayed
in the window picture while viewing the normal picture in the main picture. The
window picture size is automatically changed to 1/4 if it was 1/9 or 1/16.
Press again to resume normal PIP viewing.
FREEZE
GUIDE
Press to switch the audio and video of the main picture and the window picture.
Each time you press SWAP, the picture and sound of the two will be exchanged.
SWAP
(under the cover)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your New Projection TV (continued)
Wa t ch in g Tw o Pro g ra m s a t On e Tim e — P&P (Tw in Vie w TM
)
The Picture-and-Picture (P&P) feature allows
Using the Yellow Labeled Buttons for P&P Operations
you to view two channels simultaneously,
both in a reduced size screen. The main
picture will appear on the right.
Press to display right (main) and left (sub) pictures.
Press again to close the sub picture.
The symbol “b” or “B”
indicates w hich picture's TV
channel or input source can be
Press to select either the right or left picture in order to change the TV
ACTIVE
channel or video source using the white labeled buttons below. The
symbol “b” (or “B”) will appear to indicate which picture’s channel or input
mode can be changed.
TV channel or
changed.
input-source
mode for the
sub picture*
The symbol “≥”
indicates w hich picture's
sound is being received.
Press repeatedly to scroll through the available video inputs for the picture
TV/VIDEO
7
6
TV channel or input-
source mode for the
main picture*
on which the symbol “b” (or “B”) is displayed. (see “TV/VIDEO” on page
22)
(white labeled
button)
Sub
picture
Main picture
Press to select the TV channel on which the symbol “b”
CH
(or “B”) is displayed. (for details, see “Watching the TV”
on page 21)
JUMP
or
-
or
0
9
* It will dim in about 3 seconds.
Speed Surf
and ENTER
1 Press and hold CH + or – to change the channel
number rapidly.
2 Release to display the desired channel.
(white labeled button)
ANT
Press to change between the VHF/UHF input and the AUX input for the
picture on which the symbol “b” (or “B”) is displayed.
(white labeled
button)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
REFER TO THE
ILLUSTRATION OF THE
REMOTE CONTROL ON THE
INSIDE FRONT COVER OF
THIS MANUAL AS YOU
REVIEW THIS CHART
Using the Yellow Labeled Buttons for P&P Operations
Press to alternate sound between the right and left pictures. The symbol “ ” will
appear for a few seconds to indicate which picture’s sound is being received.
AUDIO
INDEX
This is useful when you need to copy down information that appears on the TV’s
screen.
Press to freeze both the right and left pictures.
Press again to resume P&P viewing.
No t e s:
FREEZE
GUIDE
•
•
•
The sound of the left (sub) picture is
monaural.
Caption Vision is displayed for the right
(main) picture only.
Press to switch the audio and video of the right and left pictures.
Each time you press SWAP, the picture and sound of the two will be exchanged.
SWAP
If one of the pictures received through
P&P is snowy, the entire screen may
become unstable. In this case, erase the
snowy channel. (see “Channel Skip/
Add” on page 35)
(under the cover)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your New Projection TV (continued)
2 Move the joystick in any direction to
Notes:
Usin g CHANNEL INDEX
You can use the CHANNEL INDEX feature
to display multiple channels and select one
directly.
Channels used for CHANNEL INDEX will
come directly from the TV’s list of receivable
channels (those set during Auto Program or
through the Channel Set Up menu).
•
The projection TV will continually update
move the yellow frame to the picture that
you wish to view.
each of the surrounding pictures while
the CHANNEL INDEX screen is
displayed.
•
•
Sound will only be heard from the center
picture.
If one of the pictures received through
CHANNEL INDEX is snowy, the entire
screen may become unstable. In this case,
erase the snowy channel. (see “Channel
Skip/ Add” on page 35)
R
e
o
c
i
i
p
e
f
l
u
r
-
-
-
-
2
1
1
1
s
s
b
u
a
u
g
a
-
r
-
-
-
/
/
2
2
l
t
-
r
-
-
-
-
-
t
t
e
-
3 Press
.
1 Press
.
The selected picture will be enlarged for
normal viewing.
•
If you leave the CHANNEL INDEX
screen displayed for about 20 minutes
without any additional operation,
CHANNEL INDEX is canceled and the
normal picture reappears.
The current channel will be reduced in
size and displayed in the center of the
screen in normal motion picture format.
The first twelve receivable channels will
appear one after another, clockwise,
around the center picture. These small
pictures are updated in intervals of one
second. The channel number and channel
caption (if set) on the second and later
appearances will dim.
To ca n ce l CHANNEL INDEX
Press
again, or select a TV channel using
the 0-9 and ENTER buttons.
10
Tips z
•
To cycle through the receivable channels at a time,
press CH +/–.
•
To freeze the center picture, press FREEZE.
Press it again to resume normal center picture
viewing.
A yellow-colored frame will appear to
indicate current channel selection.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus)
3 Move the joystick up or down to
Le a rn in g Me n u Se le ct io n
S e t U p
P a r e n t a l C o n t r o l
C a p t i o n V i s i o n : C C 1
highlight the desired option.
L a n g u a g e :
E n g l i s h
Use the MENU button to access a menu and
use the joystick to alter the settings. Use the
following example to learn how to modify
settings.
S e t U p
P a r e n t a l C o n t r o l
C a p t i o n V i s i o n : C C 1
V i d e o L a b e l
D i r e c t P l a y
F l a s h F o c u s :
ch
N o
L a n g u a g e :
E n g l i s h
V i d e o L a b e l
D i r e c t P l a y
F l a s h F o c u s :
ch
N o
MENU
Exit
Move
Select
1 Press the MENU button.
The main menu appears.
V i d e o
MENU
Exit
Move
Select
Some adjustment menus may require
further operations. For details, see each
menu option.
To return to the previous screen (except
for the slider adjustment menus), choose
4 Press
joystick).
(press down on the center of the
M o d e :
P i c t u r e A d j u s t m e n t
T r i n i t o n e :
N o i s e R e d u c t i o n : O f f
V i v i d
H i g h
MENU
ch
Options for your selection (Pop-up menu
or Adjusting menu) will be displayed.
“
” at the bottom of the menu and press
or move the joystick left.
MENU
Move
Select
Exit
6 Once you have completed all menu
corrections, press MENU to exit the menu
screens.
2 Move the joystick up or down to highlight
the desired menu and press (press
Pop-up menu
Adjusting menu
S e t U p
V i d e o L a b e l
down on the center of the joystick) to
activate it.
P a r e n t a l C o n t r o l
C a p t i o n V i s i o n : C C 1
V I D E O 1 :
V I D E O 2 :
V I D E O 3 :
V I D E O 4 :
V I D E O 5 :
V I D E O 1
V I D E O 2
V I D E O 3
V I D E O 4
V I D E O 5
MENU
L a n g u a g e :
V i d e o L a b E s p a ñ o l
D i r e c t P l a
E n g l i s h
F r a n ç a i s
ch
F l a s h F o c u s :
N o
S e t U p
P a r e n t a l C o n t r o l
C a p t i o n V
S e t N e w
L a n g u a g e
V i d e o L a b
D i r e c t P l a y
To e xit fro m t h e m e n u s a t a n y
t im e
MENU
Move
Select
Exit
MENU
Exit
P a s s w o r d
Move
Select
_
_
_
_
ch
F l a s h F o c u s :
N o
Press MENU.
5 Move the joystick up or down to make
Tip z
MENU
Move
Select
Exit
your selection and press
to activate it.
The previous screen will reappear.
You can also use the MENU,
inside the front drop-down panel of the projection TV
for the menu selection.
/
and
buttons
You may also move the joystick right to
activate your selection.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
Mode
Customized picture
viewing
You can choose one of five different video modes that best suits the program you
Usin g t h e Vid e o Me n u
are watching. You can also perform the “Picture Adjustment” (such as “Brightness,”
“Color,” etc.) for “Movie,” “Personal 1” or “Personal 2” to suit your taste.
Vivid: Select for enhanced picture contrast and sharpness.
Standard: Select to display a standard picture for normal viewing environments.
Movie: Select to display a finely detailed picture for low light environments.
Personal 1, Personal 2: Select to customize the “Picture Adjustment” of the
Video menu according to your personal preference.
V i d e o
M o d e :
V i v i d
P i c t u r e A d j u s t m e n t
T r i n i t o n e :
H i g h
N o i s e R e d u c t i o n : O f f
ch
Press PICTURE MODE on the remote control for direct selection of a “Mode”
setting.
MENU
Move
Select
Exit
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 29.
Picture
Adjustment
Picture adjustment
First select “Movie,” “Personal 1” or “Personal 2” from “Mode,” then highlight the
desired option using the joystick and press
the selected option.
Picture: Adjust slider right (up) to increase picture
contrast; left (down) to decrease it.
Brightness: Adjust slider right (up) to brighten the
picture; left (down) to darken it.
to display the adjusting slider of
To se le ct t h e Vid e o
m e n u :
P e r s o n a l
P i c t u r e
1
B r i g h t n e s s
C o l o r
Display / Highlight
/ Select
H u e
S h a r p n e s s
ch
Color: Adjust slider right (up) to increase color
intensity; left (down) to decrease it.
MENU
MENU
Move
Select
Exit
Hue: Adjust slider right (up) to increase the green
tones; left (down) to increase the red tones.
Sharpness: Adjust slider right (up) to sharpen the
picture; left (down) to soften it.
To re st o re t h e fa ct o ry se t t in g s
Press RESET on the remote control while the
Video menu is selected. To restore each
“Mode” to the factory setting, press RESET
after selecting the mode to be reset.
Trinitone
White intensity
adjustment
High: Select to give the white colors a blueish tint.
Medium: Select to give the white colors a neutral tint.
NTSC Standard: Select to give the white colors a reddish tint.
Select On to reduce picture noise.
Noise Reduction
Noise reduction
Select Off to cancel the feature.
“Noise Reduction” can be set separately from the “Mode” settings of the Video
menu.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust slider right (up) to increase high pitched sounds.
Adjust slider left (down) to decrease high pitched sounds.
Treble
Sound adjustment
Usin g t h e Au d io Me n u
A u d i o
T r e b l e
B a s s
B a l a n c e
M T S / S A P :
A u t o V o l u m e :
E f f e c t : T r u s u r r o u n d
S p e a k e r : O n
Adjust slider right (up) to increase low pitched sounds.
Adjust slider left (down) to decrease low pitched sounds.
Bass
Sound adjustment
Sliders
}
S t e r e o
O n
ch
Adjust slider right (up) to emphasize right speaker volume.
Adjust slider left (down) to emphasize left speaker volume.
Balance
Sound adjustment
A u d i o O u t : V a r i a b l e
S A V A S P C o n t r o l
MENU
Move
Select
Exit
When the sound is intermittent due to poor reception conditions, select “Stereo”
or “SAP.”
Stereo: Select for stereo reception when viewing a program broadcast in stereo.
SAP: Select to listen to a bilingual broadcast. (non-SAP programs will be muted
when this feature is selected)
MTS/SAP
Enjoy stereo,
bilingual and mono
programs.
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 29.
Mono: Select for mono reception. (use to reduce noise during stereo broadcasts)
Auto SAP: Select to listen to SAP when a SAP program is broadcast and return
To se le ct t h e Au d io
m e n u :
to stereo reception automatically for non-SAP programs.
MTS/SAP
Display / Highlight
/ Select
Quick MTS access: Press
on the remote control to cycle through the
“MTS/SAP” options as follows: Stereo n SAP n Mono n Auto SAP.
Auto Volume
Adjust the sound
level.
On: Sound output coming from TV speakers have the volume level equalized for all
channel audio inputs when broadcasts have different sound transmission levels.
Off: Sound output coming from the TV speakers varies according to the received
channel.
MENU
Effect
“Effect” can only be set when “Speaker” is set to “On” or “Off.”
Trusurround: Produces a virtual surround effect for Dolby-surround encoded
programs.
Simulated: Adds a surround-like effect to mono programs.
Off: Normal stereo or mono reception.
To re st o re t h e fa ct o ry se t t in g s
Press RESET on the remote control while the
Audio menu is selected.
Customizes
surround sound
effects based on the
program’s audio
type.
Quick Effect access: Press
on the remote control to cycle through the
“Effect” options as follows: Trusurround n Simulated n Effect Off.
(continued)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
On: Select to listen to the sound from the projection TV speakers alone.
Speaker
Off: Select to turn off the projection TV speakers and listen to the
projection TV’s sound only through an external audio system’s speakers.
SAVA SP: Select to turn off the projection TV speakers and listen to the projection
TV’s sound only through the Sony SAVA series speaker system. You can
adjust volume, muting, “Surround Mode,” and “Super Woofer Mode” with the
projection TV’s remote control. (see “SAVA SP Control” below)
Custom selection
of audio output
source
Center: Select to use the projection TV as center speaker when you connect an
amplifier with a Dolby Pro Logic decoder. (see “Connecting an amplifier that
supports Dolby Pro Logic decoder” on page 15)
“Audio Out” can only be set when “Speaker” is set to “Off.”
Fixed: Sound output is held at a fixed level through the audio system.
Use the AV receiver’s remote control to adjust the volume.
Variable: Sound output varies according to the TV settings.
Useful when you want to use your remote control to control the output of a
separate audio system.
Audio Out
Easy control of
volume adjustment
”SAVA SP Control” can only be set when Sony SAVA speaker system is
connected to the AUDIO (VAR/FIX) OUT connectors and “Speaker” is set to
“SAVA SP.” (see “Speaker” above)
You can also adjust the SAVA speaker’s volume using VOL +/– of the projection
TV’s remote control.
SAVA SP Control
Controls Sony
SAVA speaker’s
mode.
Surround Mode: Select to activate the SAVA Speaker’s surround mode.
Super Woofer Mode: Select to activate the SAVA Speaker’s super woofer mode.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Spring: Select Yes to compensate for Daylight Saving Time.
The current time automatically moves ahead one hour.
Fall: Select No at the end of Daylight Saving Time.
The current time moves back one hour.
Usin g t h e Tim e r Me n u
Daylight Savings
Automatically
T i m e r
D a y l i g h t S a v i n g s : Y e s
C u r r e n t T i m e
adjusts the time.
O n
/
O f f T i m e r
C u r r e n t T i m e
– – – – AM
1 Press
, then move the joystick up or down until
Current Time
Necessary for the
Timer.
ch
the current day (Sun - Sat) is displayed, and press
:
– – –
-
-
-
-
-
: -
-
A M
Exit
.
MENU
Move
Select
2 Move the joystick up or down until the current hour
(1-12) and AM/PM is displayed, and press
3 Move the joystick up or down until the current minute
(00-59) is displayed, and press
.
MENU
Move
Select
Exit
After setting the clock you can use the timer
to turn the projection TV on and off.
.
The clock has now started. Press MENU to exit.
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 29.
O n / O f f T i m e r
– – – – – –
1 Move the joystick up or down until the desired day or
range of days (Every Sun-Sat, Every Mon-Fri,
Sunday, Monday, ....Saturday, Every Sunday,
On/Off Timer
Wake up or
– – : – – AM
h
ch
–
– – –
MENU
scheduled viewing.
To se le ct t h e Tim e r
m e n u :
....Every Saturday) is displayed, and press
.
S u n 1 2 : 0 0 A M
Move Select
2 Move the joystick up or down until the time (hours
and minutes) that you want the projection TV to
Display / Highlight
/ Select
Exit
remain on is displayed, and then press
3 Move the joystick up or down to set the time duration (maximum of 6 hours)
and press
4 Move the joystick up or down to select the desired channel and press
.
MENU
.
.
The timer is now set. The TIMER/STAND BY indicator on your projection TV
will be lit.
Press MENU to exit. To cancel your timer setting, press RESET while in the
On/Off Timer window. Performing Auto Program will erase all Timer settings.
Tip z
Set daylight saving time before setting the clock. Any
loss of power will cause these settings to be erased.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
ch
Usin g t h e Ch a n n e l Se t Up
Channel
Caption
Easy recognition
of the channel
you are watching
You can add a caption for up to 32 channels of VHF/
UHF input.
With the Channel Caption window open:
C h a n n e l C a p t i o n
C h a n n e l :
Me n u
– – –
– – – – –
C a p t i o n :
C h a n n e l S e t U p
C h a n n e l C a p t i o n
F a v o r i t e C h a n n e l : A u t o
C h a n n e l S k i p / A d d
A u t o P r o g r a m
1 Press
and then move the joystick up or down to
select the desired channel. You can view the channel
that is selected with the Channel Caption menu in the
sub screen.
MENU
Move
Select
Exit
C a b l e :
O n
ch
2 Press
.
3 Move the joystick up or down to display the first letter
MENU
Move
Select
Exit
or number of the caption and press
to select it.
Repeat until up to five digits are selected.
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 29.
4 Press
.
To erase a caption, press RESET.
Favorite
Channel
User’s favorite
channels
The Favorite Channel feature enables easy access to the eight channels that you
preset (or the last channel that you were watching).
(for details on how to set up this feature, see “Setting and Selecting Favorite
Channel” on page 36)
ch
To se le ct t h e Ch a n n e l Se t Up
m e n u :
ch
Display / Highlight
/ Select
MENU
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel
Skip/Add
Skips unnecessary
channels.
After AUTO SET UP, you can erase unnecessary
channels from the channel preset memory.
With the Channel Skip/Add window open:
1 Move the joystick up or down to select the desired
channel. You can view the channel that is selected
with the Channel Skip/Add menu in the sub screen.
You can also use CH +/– or 0–9 and ENTER
buttons.
C h a n n e l S k i p / A d d
1 : S k i p
2 : S k i p
ch
3 :
4 :
5 :
6 :
7 :
8 :
9 :
A d d
A d d
A d d
A d d
A d d
A d d
A d d
Select a channel
Move Select
MENU
Exit
2 Press
.
3 Move the joystick up or down to select Skip, and press
.
The selected channel will be erased.
If you want to re-enter the skipped channel, follow the steps above and select
Add.
Auto Program
Automatic
Select Yes to signal the projection TV to automatically program all receivable
channels. When all the receivable channels are stored, the lowest numbered
channel is displayed.
channel presetting
Select No to cancel Auto Program.
Cable
Select On if your projection TV is connected to a cable system.
Cable system
setting
Select Off if your projection TV is connected to an antenna.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
2 Move the joystick up or down to select
4 Move the joystick up or down to select a
Se t t in g a n d Se le ct in g
Fa vo rit e Ch a n n e l
The Favorite Channel feature of your
projection TV enables easy access to the eight
channels that you preset (or the last channel
that you were watching).
“Manual” and press
.
channel.
The Favorite Channel menu will appear.
If you set Channel Caption names (e.g.
CNN, HBO), they will also be displayed.
(see “Channel Caption” on page 34)
You have now selected a favorite channel.
F a v o r i t e C h a n n e l
ch
1 .
2 .
3 .
4 .
5 .
6 .
7 .
1
8
C N N
1 0 S P T N
2 0
3 0
4 0
5 0
8 . 1 0 0
F a v o r i t e C h a n n e l
ch
Your Favorite Channel options can be set
automatically or manually.
1 .
2 .
3 .
4 .
5 .
6 .
7 .
1
2
C N N
1 0 S P T N
Select a channel
2 0
3 0
4 0
5 0
The factory setting for “Favorite Channel” is
“Auto.”
5 Press
and use the joystick to program
8 . 1 0 0
other favorite channels. (Follow steps 3
and 4.)
Select a position
When “Favorite Channel” is set to “Auto,”
the last eight channels selected with the 0–9
buttons will be set as Favorite Channel
options. If you want to input your own
selections as Favorite Channel settings, set to
“Manual.”
6 Press MENU when you have finished.
3 Move the joystick up or down to select a
Your favorite channels are now ready for
use.
position (1–8), and press
.
F a v o r i t e C h a n n e l
ch
1 .
2 .
3 .
4 .
5 .
6 .
7 .
1
2
C N N
Se t t in g Fa vo rit e Ch a n n e l m a n u a lly
1 0 S P T N
2 0
3 0
4 0
5 0
1 Select “Favorite Channel” from the
Channel Set Up menu. (see page 34)
8 . 1 0 0
C h a n n e l S e t U p
C h a n n e l C a p t i o n
F a v o r i t e C h a n n e : A u t o
Select a channel
Manual
C h a n n e l S k i p / A d d
A u t o P r o g r a m
C a b l e :
O n
ch
MENU
Move
Select
Exit
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Usin g Fa vo rit e Ch a n n e l
3 Press
to select the channel.
Ch a n g in g Fa vo rit e Ch a n n e l ch o ice s
You have the option of returning to the
Favorite Channel screen to adjust any of your
favorite channel choices.
The selected channel will be displayed for
normal viewing.
You can use the Favorite Channel feature to
directly select the channel you want to watch.
1 Press
once.
Simply proceed as described in “Setting
Favorite Channel manually” (skip step 2 if
“Manual” is already selected).
The favorite channel menu and a window
picture will be superimposed over the
current channel. The window picture
displays the channel selected from the
menu.
When you reach step 3, select the position
you want to change and press
. Move the
joystick up or down to select a new channel.
To cancel the favorite channel menu before
selecting a channel, move the joystick up or
down to select “Exit” at the bottom of the
F a v o r i t e C h a n n e l
ch
1
2
C N N
1 .
2 .
3 .
4 .
5 .
6 .
7 .
6
2
1 0 S P T N
1 0 S P T N
2 0
3 0
4 0
5 0
1 0 0
E x i t
2 0
3 0
4 0
5 0
menu and press
.
8 . 1 0 0
Select a channel
2 Move the joystick up or down to select the
channel that you wish to view from the
menu.
Press MENU when you are done.
No t e :
•
The Favorite Channel feature is not
The picture of the selected channel will be
displayed in the window picture.
available for the picture input from AUX.
1
2
C N N
1 0 S P T N
2 0
3 0
4 0
5 0
1 0 0
E x i t
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
Allows you to block TV programs that you feel are unsuitable for your
children. (see “Using the Parental Control Feature” on page 40 for details)
Usin g t h e Se t Up Me n u
Parental
Control
Blocks programs
unsuitable for
children.
S e t U p
P a r e n t a l C o n t r o l
C a p t i o n V i s i o n : C C 1
L a n g u a g e :
E n g l i s h
V i d e o L a b e l
D i r e c t P l a y
F l a s h F o c u s :
ch
N o
S e t U p
P a r e n t a l C o n t r o l
C a p t i o n V i s i o n :
L a n g u a g e :
V i d e o L a b e l
D i r e c t P l a y
F l a s h F o c u s :
Some programs are broadcast with Caption Vision.
Caption Vision
Television closed
caption display
C C 1
To display Caption Vision, select CC 1, CC 2, CC 3,
CC 4, TEXT1, TEXT2, TEXT3 or TEXT4 from the
menu. Then press the CC button until “Caption
Vision” is displayed.
C C 2
C C 3
C C 4
MENU
Exit
Move
Select
ch
T e x t 1
T e x t 2
T e x t 3
T e x t 4
For detailed information on using the remote
control to modify menu settings, refer to
“Learning Menu Selection” on page 29.
MENU
Move
Select
Exit
CC 1, CC 2, CC 3 or CC 4 displays a printed
version of the dialogue or sound effects of a
program. (The mode should be set to CC 1 for most
programs.) TEXT1, TEXT2, TEXT3, or TEXT4
displays network/station information presented using
either half or the whole screen.
To se le ct t h e Se t Up
m e n u :
Display / Highlight
/ Select
Notes:
• Poor reception of TV programs can cause errors in Caption Vision and XDS.
Captions may appear with a white box or other errors instead of the intended
text.
MENU
• XDS, Caption Vision, and the status display cannot be used at the same time.
Select from available languages (English, Español or Français) to display all
Language
menus in your language of choice.
Preferred language
38
Download from Www.Somanuals.com. All Manuals Search And Download.
V i d e o L a b e l
V I D E O 1 :
V I D E O 2 :
V I D E O 3 :
V I D E O 4 :
V I D E O 5 :
Video Label
This feature allows you to label each input mode so that you can easily identify the connected equipment
(e.g. you can label VIDEO 1 IN as VHS).
With the Video Label window open:
V I D E O 1
V I D E O 2
V I D E O 3
V I D E O 4
V I D E O 5
Easy recognition of
connected equipment
(e.g. SAT, VHS, etc.)
1 Move the joystick up or down to select the input mode you want to label and press
.
MENU
Exit
Move
Select
2 Move the joystick up or down to select the label and press
.
V i d e o L a b e l
Video Label Options:
V I D E O 1 :
V I D E O 2 :
V I D E O 3 :
V I D E O 4 :
V I D E O 5 :
V i d e o 1
V H S
8 m m
B e t a
L D
S A T
D V D
VIDEO 1: VIDEO 1, VHS, 8mm, Beta, LD, SAT, DVD, AV RECEIVER, DTV, Skip
VIDEO 2/3: VIDEO 2/VIDEO 3, VHS, 8mm, Beta, LD, SAT, DVD, DTV, Skip
VIDEO 4/5: VIDEO 4/VIDEO 5, SAT, DVD, DTV, Skip
If you select “Skip,” your projection TV will skip this connection when you scan through video sources
using the TV/VIDEO button.
A V R E C E I V E R
D T V
S k i p
MENU
Move
Select
Exit
D i r e c t P l a y
This feature allows you to switch the input mode from the TV to a Sony VCR (MDP or DVD) and start
playing by only pressing the ( (playback) button on the remote control. You have to set the VTR1/2/3/DVD/
MDP switch on the remote control (e.g., you connect your VCR to the VIDEO 3 IN jacks and set the VTR1/2/
3/DVD/MDP switch to VTR 3).
Direct Play
Easy operation of a
connected VCR
V I D E O 1 :
V I D E O 2 :
V I D E O 3 :
V I D E O 4 :
V I D E O 5 :
O f f
O f f
O f f
O f f
O f f
1
2
3
DVD/MDP
With the Direct Play window open:
MENU
Move
Select
Exit
1 Move the joystick up or down to select the input to which your video equipment is connected,
D i r e c t P l a y
and press
.
V I D E O 1 :
V I D E O 2 :
V I D E O 3 :
V I D E O 4 :
O f f
V T R 1
V T R 2
V T R 3
2 Move the joystick up or down to select the position of the VTR 1/2/3/DVD/MDP switch, and press
.
V I D E O 5 : D V D / M D P
1
2
3
DVD/MDP
MENU
Move
Select
Exit
Select Yes and press
becomes white. (for details, see page 20)
Select No to cancel Flash Focus.
to start Flash Focus adjustment. When the adjustment is completed, the cross pattern on the screen
Flash Focus
Automatic convergence
adjustment
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
1 Select “Parental Control” from the Set Up
4 Make sure that “Country” is highlighted,
Usin g t h e Pa re n t a l Co n t ro l
Fe a t u re
The TV programs and movies shown on TV
are given a rating signal based on the
following rating systems.
menu. (see page 38)
and press
.
S e t U p
P a r e n t a l C o n t r o l
P a r e n t a l C o n t r o l
C o u n t r y :
P a r e n t a l L o
R a t i n g : C h i l d
C h a n g e P a s s w o r d
U . S . A .
C a p t i o n V
S e t N e w
L a n g u a g e
C a n a d a
P a s s w o r d
_
_
_
_
V i d e o L a b
D i r e c t P l a y
ch
F l a s h F o c u s :
N o
In U.S.A.: U.S. Television Parental
MENU
Move
Select
Exit
MENU
Move
Select
Exit
Guidelines to rate television programs (U.S.
TV ratings), and Motion Picture Association
of America (MPAA) Guidelines to rate movies
including those shown on TV (movie ratings)
2 Enter a four digit password* using the 0–9
5 Move the joystick up or down to select
buttons.
S e t U p
P a r e n t a l C o n t r o l
C a p t i o n V
C o n f i r m
L a n g u a g e
V i d e o L a b
D i r e c t P l a y
F l a s h F o c u s :
your country (U.S.A. or Canada), and
press
.
In Canada: Canadian English Language
ratings to rate television programs in English,
and Canadian French Language ratings to
rate those in French.
P a s s w o r d
_
_
_
_
P a r e n t a l C o n t r o l
C o u n t r y :
P a r e n t a l L o c k :
ch
U . S . A .
N o
Off
C h i l d
C h a n g e P a s s w o r d
R a t i n g :
MENU
Move
Select
Exit
To block programs you feel are unsuitable for
your children, you need to set the TV for the
desired rating systems. Sony’s predetermined
ratings are also available.
See pages 47 to 50 for a description of the
ratings.
* Do not enter “4357” corresponding to “HELP”
on a phone number pad. (see page 47)
MENU
Move
Select
Exit
3 To confirm the password, re-enter the
6 Move the joystick up or down to select
same password with the 0–9 buttons.
“Parental Lock,” and press
.
Your password is stored and the Parental
Control menu automatically appears.
If you want to change the password, see
page 46.
P a r e n t a l C o n t r o l
The Parental Control feature of the TV
functions by receiving the rating signal from
your local broadcasting station or cable
service provider.
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g : C Off
C h a n g e P a s s w o r d
U . S . A .
On
P a r e n t a l C o n t r o l
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g : C h i l d
C h a n g e P a s s w o r d
U . S . A .
Off
MENU
Move
Select
Exit
Act iva t in g t h e Pa re n t a l Co n t ro l
Fe a t u re
(continued)
First, set a password, then select your desired
rating from Sony’s predetermined ratings.
MENU
Move
Select
Exit
40
Download from Www.Somanuals.com. All Manuals Search And Download.
To d e a ct iva t e t h e Pa re n t a l Co n t ro l
fe a t u re
3 Move the joystick up or down to select
7 Move the joystick up or down to select
“On,” and press
“Parental Lock,” and press
.
.
P a r e n t a l C o n t r o l
If you set “Parental Lock” in the Parental
Control menu to “Off,” the Parental Control
feature will not work and you can view all
TV programs and movies shown on TV.
P a r e n t a l C o n t r o l
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g : C Off
C h a n g e P a s s w o r d
U . S . A .
C o u n t r y :
U . S . A .
On
P a r e n t a l L o c k :
On
C h i l d
C h a n g e P a s s w o r d
R a t i n g :
MENU
1 Select “Parental Control” from the Set Up
Move
Select
Exit
MENU
Move
Select
Exit
menu. (see page 38)
4 Move the joystick up or down to select
“Off,” and press
8 Move the joystick up or down to select
“Rating,” and press
S e t U p
P a r e n t a l C o n t r o l
C a p t i o n V
L a n g u a g e
.
.
1
P a s s w o r d
_
_
_
_
V i d e o L a b e l
D i r e c t P l a y
F l a s h F o c u s :
P a r e n t a l C o n t r o l
ch
C o u n t r y :
U . S . A .
P a r e n t a l C o n t r o l
N o
C o u n t r y :
U . S . A .
P a r e n t a l L o c k :
Off
C h i l d
C h a n g e P a s s w o r d
P a r e n t a l L o c k :
R a t i n g :
C h a n g e P Yo u t h
Y o u n g A d u l t
C u s t o m
R a t i n g :
On
C h i l d
MENU
Move
Select
Exit
2 Enter your four digit password using the
MENU
A g e s u p t o
Move Select
6
Move
Select
Exit
MENU
Exit
0-9 buttons.
9 Move the joystick up or down to select a
The Parental Control menu appears.
5 Press MENU to exit the menu.
desired rating (“Child,” “Youth” and
P a r e n t a l C o n t r o l
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g : C h i l d
C h a n g e P a s s w o r d
U . S . A .
“Young Adult”), and press
.
On
If you want to select the ratings from
“Custom,” go to step 4 of “Selecting a
Custom Rating in U.S.A.” on page 42 or
“Selecting a Custom Rating in Canada”
on page 45, according to your “Country”
setting.
MENU
Move
Select
Exit
10 Press MENU to exit the menu.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
3 Move the joystick up or down to select
“Rating,” and press
To u n lo ck t h e Pa re n t a l Co n t ro l fe a t u re
t e m p o ra rily
Se le ct in g a Cu st o m Ra t in g in
U.S.A.
.
When you select a Parental Control program,
no sound or picture except for a channel
P a r e n t a l C o n t r o l
If you want to select the ratings to be blocked
from “Custom” once you have activated the
Parental Control feature (page 41), follow the
procedure below.
C o u n t r y :
U . S . A .
P a r e n t a l L o c k : On
R a t i n g :
C h a n g e P Yo u t h
Y o u n g A d u l t
C u s t o m
C h i l d
number will appear. The
indicator is
displayed. To view the program, follow the
steps below.
A g e s u p t o
Move Select
6
MENU
Exit
For a detailed description of each rating, see
“What the Ratings Mean” on pages 47 to 49.
1 Press ENTER to display the “Password”
screen.
4 Move the joystick up or down to select
1 Select “Parental Control” from the Set Up
2 Enter your password using the 0–9
buttons. Parental Control will be canceled
(“Parental Lock” set to “Off”) until you
turn your projection TV off.
“Custom,” and press
.
menu. (see page 38)
S e t U p
P a r e n t a l C o n t r o l
C u s t o m R a t i n g
C a p t i o n V
1
P a s s w o r d
T V R a t i n g
M o v i e R a t i n g
_
_
_
_
L a n g u a g e
V i d e o L a b e l
D i r e c t P l a y
U n r a t e d :
V i e w A l l
ch
F l a s h F o c u s :
N o
S e l e c t c a t e g o r y
Move Select Exit
MENU
Move
Select
Exit
MENU
2 Enter your four digit password using the
0–9 buttons.
The Parental Control menu appears.
Make sure that “Country” is set to
“U.S.A.”
P a r e n t a l C o n t r o l
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g : C h i l d
C h a n g e P a s s w o r d
U . S . A .
On
MENU
Move
Select
Exit
42
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Move the joystick up or down to select
8 Move the joystick left or right to select
First, select a TV rating.
“
,” and press
.
the extender to be viewed, and press
.
5 Move the joystick up or down to select
The
indicator automatically appears
“TV Rating,” and press
.
T V R a t i n g
beside the selected rating and all “higher”
ratings, indicating that the programs that
match the ratings will be blocked.
_
_
_
–
–
–
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
:FV _
T V R a t i n g
:D – L – S – V –
:D – L – S – V –
_
_
_
_
_
_
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
:FV _
:
L – S – V
T V R a t i n g
:D _ L _ S _ V _
:D _ L _ S _ V _
L _ S _ V _
B l o c k c o n t e n t
Move Select
MENU
_
_
_
–
–
–
Exit
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
:
:FV _
S e l e c t r a t i n g
Move
:D – L – S – V –
:D – L – S – V –
MENU
Exit
Select
9 Move the joystick up or down to select
“–,” and press
:
L – S – V
.
S e l e c t c a t e g o r y
Move Select Exit
MENU
6 Move the joystick up or down to select
“–” appears beside the selected extender,
indicating that the programs that match
the extender can be viewed.
the TV rating to be blocked, and press
.
Some ratings have additional content
ratings called “extenders.” The extenders
are defined as follows: D (sexually
suggestive Dialog), FV (Fantasy
Violence), L (coarse Language), S (Sexual
situations) and V (Violence). By setting
the extenders, you can define additional
viewing limits. For more details of
extenders, see page 49.
If you select “ ,”
is displayed to
T V R a t i n g
show that the programs that match the
extender will be blocked again.
_
_
_
_
_
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
:FV _
:D _ L _ S _ V _
:D _ L _ S _ V _
:
L _ S _ V _
T V R a t i n g
A l l o w r a t i n g
Move Select
_
_
_
–
–
–
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
MENU
Exit
:FV _
:D – L – S – V _
:D – L – S – V –
All of the extenders included in the
selected ratings will be blocked. If you
wish to allow any of them to be viewed,
go to step 8.
:
L – S – V
S e l e c t c a t e g o r y
Move Select Exit
MENU
(continued)
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
13 Move the joystick up or down to select
To b lo ck TV p ro g ra m s a n d /o r m o vie s
fo r w h ich a ra t in g sig n a l is n o t g ive n
(NR a n d N/A)
10 Repeat steps 8 and 9 for other extenders.
the movie rating to be blocked, and press
.
All programs that match the ratings you
select and higher, except for the
extenders that were canceled, will be
blocked.
For a description of the NR and N/ A ratings,
see page 48.
M o v i e R a t i n g
G
PG
PG–13
R
NC–17
X
–
–
–
–
–
11 After setting of the TV rating is complete,
1 Perform steps 1–4 of “Selecting a Custom
move the joystick up or down to select
Rating in U.S.A.” on page 42.
“
,” and press
.
B l o c k r a t i n g
Move Select
2 Move the joystick up or down to select
MENU
Exit
C u s t o m R a t i n g
“Unrated,” and press
.
T V R a t i n g
M o v i e R a t i n g
U n r a t e d :
V i e w A l l
14 Move the joystick up or down to select
C u s t o m R a t i n g
“
,” and press
.
T V R a t i n g
M o v i e R a t i n g
S e l e c t c a t e g o r y
The
indicator automatically appears
U n r a t e d :
View A l l
T V
MENU
Move
Select
Exit
beside the selected rating and all “higher”
ratings, indicating that the programs that
match the ratings will be blocked.
M o v i e
B o t h
Second, select a movie rating.
N o b l o c k
Move Select
MENU
Exit
12 Move the joystick up or down to select
“Movie Rating,” and press
.
M o v i e R a t i n g
G
PG
PG–13
R
NC–17
X
–
–
–
–
M o v i e R a t i n g
–
–
–
–
–
–
G
PG
PG–13
R
NC–17
X
–
S e l e c t r a t i n g
Move Select
MENU
Exit
S e l e c t r a t i n g
Move Select
MENU
Exit
15 Press MENU to exit the menu.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Move the joystick up or down to select
“Rating,” and press
3 Move the joystick up or down to select
Se le ct in g a Cu st o m Ra t in g in
Ca n a d a
.
the type of programs to be blocked, and
press
.
P a r e n t a l C o n t r o l
If you want to select the ratings to be blocked
from “Custom” once you have activated the
Parental Control feature (page 41), follow the
procedure below.
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g :
C h a n g e P Yo u t h
Y o u n g A d u l t
C u s t o m
C a n a d a
On
C h i l d
C u s t o m R a t i n g
T V R a t i n g
M o v i e R a t i n g
U n r a t e d :
V i e w A l l
A g e s u p t o
Move Select
6
T V
M o v i e
B o t h
MENU
For a detailed description of each rating, see
“What the Ratings Mean” on pages 49 and
50.
Exit
B l o c k a l l u n r a t e d
p r o g r a m m i n g
MENU
Move
Select
Exit
4 Move the joystick up or down to select
“Custom,” and press
.
1 Select “Parental Control” from the Set Up
menu. (see page 38)
C u s t o m R a t i n g
S e t U p
P a r e n t a l C o n t r o l
To b lo ck ...
Se le ct ...
E n g l i s h R a t i n g
F r e n c h R a t i n g
U . S . A . R a t i n g
C a p t i o n V
1
P a s s w o r d
_
_
_
_
L a n g u a g e
V i d e o L a b e l
D i r e c t P l a y
F l a s h F o c u s :
No program
View All
ch
N o
(to view any unrated TV
program and movie)
S e l e c t c a t e g o r y
MENU
MENU
Move
Select
Exit
Move
Select
Exit
Unrated TV programs
Unrated movies
TV
2 Enter your four digit password using the
(continued)
0–9 buttons.
Movie
Both
The Parental Control menu appears.
Make sure that “Country” is set to
Unrated TV programs and
movies
“Canada.”
P a r e n t a l C o n t r o l
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g : C h i l d
C h a n g e P a s s w o r d
C a n a d a
On
4 Press MENU to exit the menu.
MENU
Move
Select
Exit
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
5 Move the joystick up or down to select
7 Move the joystick up or down to select
Ch a n g in g t h e Pa ssw o rd
the rating you want to block, and press
.
“
,” and press
.
1 Select “Parental Control” from the Set Up
The
indicator automatically appears
menu. (see page 38)
beside the selected rating and all “higher”
ratings, indicating that the programs that
match the ratings will be blocked.
The selected rating appears.
S e t U p
P a r e n t a l C o n t r o l
Canadian English Rating
C a p t i o n V
P a s s w o r d
_
L a n g u a g e
_
_
_
E n g l i s h R a t i n g
V i d e o L a b e l
D i r e c t P l a y
F l a s h F o c u s :
_
_
_
_
_
_
C
C8+
G
PG
14+
18+
ch
N o
E n g l i s h R a t i n g
_
_
_
C
C8+
G
MENU
Move
Select
Exit
S e l e c t r a t i n g
Move Select
PG
14+
18+
2 Enter your four digit password using the
0–9 buttons.
MENU
Exit
S e l e c t r a t i n g
Move Select
The Parental Control menu appears.
Canadian French Rating
U.S. TV Rating
MENU
Exit
F r e n c h R a t i n g
U . S . A . R a t i n g
P a r e n t a l C o n t r o l
_
_
_
_
_
G
C o u n t r y :
P a r e n t a l L o c k :
R a t i n g : C h i l d
C h a n g e P a s s w o r d
U . S . A .
_
_
_
_
_
_
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
8 ans+
13 ans+
16 ans+
18 ans+
On
:FV _
Some U.S. TV ratings have additional
content ratings called “extenders,” such
as D, FV, L, S and V. By setting the
extenders, see steps 7 to 10 of “Selecting a
Custom Rating in U.S.A.” on pages 43
and 44. For more details of extenders, see
page 49.
:D _ L _ S _ V _
:D _ L _ S _ V _
:
L _ S _ V _
S e l e c t r a t i n g
Move Select
S e l e c t r a t i n g
Move Select
MENU
Exit
MENU
Exit
MENU
Move
Select
Exit
6 Move the joystick up or down to select
3 Move the joystick up or down to select
the TV rating to be blocked, and press
.
“Change Password,” and press
.
All of the extenders included in the
selected ratings will be blocked. If you
wish to allow any of them to be viewed,
go to step 8.
P a r e n t a l C o n t r o l
Example: Canadian English Rating
C o u n t r y :
P a r e n t a l L o c k : O n
R a t i n g :
U . S . A
E n g l i s h R a t i n g
C h i l d
_
_
_
_
C
C8+
G
PG
14+
18+
C h a n g e P a s s w o r d
N e w
_ _ _ _
U s e [ 0 - 9 ] t o e n t e r
n e w f o u r d i g i t
p a s s w o r d
8 Press MENU to exit the menu.
_
MENU
Move
Exit
A l l o w r a t i n g
Move Select
MENU
Exit
46
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Enter a new four digit password using
the 0–9 buttons.
If yo u h a ve fo rg o t t e n yo u r p a ssw o rd
Wh a t t h e Ra t in g s Me a n
In step 2 of “Changing the Password” on
page 46, enter the master password “4357”
(corresponding to “HELP” on a phone
number pad). You can then store a new
password.
P a r e n t a l C o n t r o l
C o u n t r y :
P a r e n t a l L o c k : O n
R a t i n g :
C h a n g e P a s s w o r d
C o n f i r m
_ _ _ _
U . S . A
Ra t in g s in U.S.A.
C h i l d
So n y’s p re d e t e rm in e d ra t in g s
These are original ratings that Sony
predetermined according to the viewer’s age.
Each rating allows you to view the certain
programs, as follows.
C o n f i r m p a s s w o r d
MENU
Move
Exit
No t e s:
•
If you entered “4357” as your password
the first time, you cannot store a new
password. (see step 2 of “Activating the
Parental Control Feature” on page 40)
5 Enter the password set in step 4 again to
confirm.
See pages 48 and 49 for a description of each
rating.
If you entered it incorrectly, “Password
incorrect” appears.
•
When you select a Parental Control
Child: Suitable for children under the age of
program and the
indicator is
6.
Re-enter the correct password.
Viewable U.S. movie ratings: G, NR, and N/ A
Viewable U.S. TV ratings: TV-Y, TV-G, and
TV-NR
displayed on the screen, you cannot view
that program even if you enter “4357.”
(see “To unlock the Parental Control
feature temporarily” on page 42)
6 Press MENU to exit the menu.
Youth: Suitable for children aged 7 and older.
Viewable U.S. movie ratings: G, PG, NR, and
N/ A
Viewable U.S. TV ratings: TV-Y, TV-Y7, TV-G,
TV-PG, and TV-NR
Young Adult: Suitable for children aged 13
and older.
Viewable U.S. movie ratings: G, PG, PG-13,
NR, and N/ A
Viewable U.S. TV ratings: TV-Y, TV-Y7, TV-G,
TV-PG, TV-14, and TV-NR
(continued)
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
TV-Y7 (Directed to Older Children): This
program is designed for children aged 7 and
above. Themes and elements in this program
may include mild fantasy violence or
slapstick violence, or may frighten children
under the age of 7.
U.S. m o vie ra t in g s
NC-17 or X (No One 17 Or Under
Admitted.): This is a film that most parents
would consider not suitable for children
aged 17 and under. There may be violence,
sex, abberrational behavior, drug abuse or
other elements of concern.
U.S. movie ratings are for movies (including
those shown on TV) rated according to the
Motion Picture Association of America
(MPAA) Guidelines.
G (General Audiences—All Ages
Admitted): In G-rated films no strong words
are used, the violence is at a minimum,
nudity and sex scenes are not present, nor is
there any drug use.
TV-G (General Audience): Most parents
would find this program suitable for all ages.
It contains little or no violence, no strong
language and little or no sexual dialog or
situations.
NR (Not Rated): This is a film that a
producer has not rated, intending to have his
film widely released.
N/A (Not Applicable): This is a film that a
producer considers outside the scope of the
MPAA ratings.
PG (Parental Guidance Suggested. Some
Material May Not Be Suitable For
Children): This is a film which may need to
be monitored first by parents.
TV-PG (Parental Guidance Suggested):
This program contains some material that
parents may find unsuitable for younger
children.
No t e :
•
NR and N/ A ratings are shown together
as “Unrated” in the menu.
PG-13 (Parents Strongly Cautioned. Some
Material May Be Inappropriate For
Children Under 13): Parents are alerted to be
very careful about the attendance of their
under-teenage children when viewing.
TV-14 (Parents Strongly Cautioned): This
program contains some material that many
parents would find unsuitable for children
under the age of 14.
U.S. TV ra t in g s
U.S. TV ratings are for TV programs rated
according to the U.S. Television Parental
Guidelines.
TV-MA (Mature Audience Only): This
program is specifically designed to be
viewed by adults and therefore may be
unsuitable for children under the age of 17.
R (Restricted, Under 17 Require
Accompanying Parent Or Adult Guardian):
This film includes hard language, tough
violence, nudity, drug abuse or other
elements of concern.
TV-Y (All Children): This program is
designed for young children aged 2–6 and is
appropriate for all children.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Young Adult: Suitable for children aged 14
and older.
Viewable Canadian English Language
ratings: C, G, C8+, PG and 14+
Viewable Canadian French Language
ratings: G, 8 ans+, 13 ans+
TV-NR (Not Rated/Unrated): This is a
program broadcast without any rating, such
as news, news flashes or sports.
Ra t in g s in Ca n a d a
So n y’s p re d e t e rm in e d ra t in g s
These are original ratings that Sony
predetermined according to the viewer’s age.
Each rating allows you to view the certain
programs, as follows.
No t e :
The TV-NR rating is shown as “Unrated” in
the menu.
Viewable U.S. TV ratings: TV-Y, TV-Y7, TV-
G, TV-PG, TV-14, and TV-NR
See the right column to page 50 for a
description of each rating.
Ab o u t t h e e xt e n d e rs o f U.S. TV ra t in g s
Ca n a d ia n En g lish La n g u a g e ra t in g s
TV-Y7, TV-PG, TV-14 and TV-MA ratings
have additional content ratings called
“extenders” to define additional viewing
limits. The extenders are defined as follows:
Child: Suitable for children under the age of
7.
Viewable Canadian English Language
ratings: C and G
The Canadian English Language Ratings are
for TV programs in English broadcast in
Canada.
Viewable Canadian French Language
ratings: G
Viewable U.S. TV ratings: TV-Y, TV-G, and
TV-NR
D (sexually suggestive Dialog): Programs
containing suggestive dialog, or sexual
innuendo
C (Programming intended for children
under age 8): There will be no realistic
scenes of violence or no offensive language,
nudity or sexual content. Careful attention is
paid to themes, which could threaten
FV (Fantasy Violence): Programs containing
cartoon violence occurring in TV-Y7
programs only
Youth: Suitable for children aged 8 and
older.
Viewable Canadian English Language
ratings: C, G, C8+ and PG
Viewable Canadian French Language
ratings: G and 8 ans+
children’s sense of security and well-being.
C8+ (Programming generally considered
acceptable for children 8 years and over to
watch on their own): Violence will not be
portrayed as the preferred, acceptable, or
only way to resolve conflict; or encourage
children to imitate dangerous acts which
they may see on television. There will be no
profanity, nudity or sexual content.
L (coarse Language): Programs containing
coarse language
S (Sexual situations): Programs containing
sexual content
Viewable U.S. TV ratings: TV-Y, TV-Y7, TV-
G, TV-PG, and TV-NR
V (Violence): Programs containing violence
There may be some profanity, violence or
brief nudity in these programs.
(continued)
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your SET UP (menus) (continued)
No t e :
G (General Audience): Will contain very
little violence, either physical or verbal or
emotional. There may by some inoffensive
slang, no profanity and no nudity.
16 ans+ (Programming is not suitable for
children under the age of 16): Contains
frequent scenes of violence or intense
violence.
The E (Exempt) rating is not shown in the
menu.
PG (Parental Guidance): Programming
intended for a general audience but which
may not be suitable for younger children.
Parents may consider some content
inappropriate for unsupervised viewing by
children aged 8 - 13.
18 ans+ (Programming restricted to adults):
Contains constant violence or scenes of
extreme violence.
Ca n a d ia n Fre n ch La n g u a g e ra t in g s
The Canadian French Language Ratings are
for TV programs in French broadcast in
Canada.
E (Exempt): Exempt programming.
No t e :
G (General): Programming intended for
audience of all ages. Contains no violence, or
the violence it contains is minimal or is
depicted appropriately with humor or
caricature or in an unrealistic manner.
The E (Exempt) rating is not shown in the
menu.
14+ (Programming contains themes or
content which may not be suitable for
viewers under the age of 14): Parents are
strongly cautioned to exercise discretion in
permitting viewing by pre-teens and early
teens.
8 ans+ (8+ General - Not recommended for
young children): Programming intended for
a broad audience but contains light or
occasional violence that could disturb young
children. Viewing with an adult is
recommended for young children (under the
age of 8).
18+ (Adult): May contain violence integral
to the development of the plot, character or
theme, intended for adult audiences. May
contain graphic language and explicit
portrayals of nudity and/ or sex.
13 ans+ (Programming may not suitable for
children under the age of 13): Viewing with
an adult is strongly recommended for
children under 13.
E (Exempt): Exempt programming includes:
news, sports documentaries and other
information programming: talk shows,
music videos, and variety programming.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Video Equipment
Panasonic
Pentax
Philco
Philips
Pioneer
308, 309, 306, 307
VCR m a n u fa ct u re r co d e n u m b e rs
305, 304
308, 309
308, 309, 310
308
308, 309, 306
Se t t in g t h e Ma n u fa ct u re r' s
Co d e
Ma n u fa ct u re r
Co d e
Sony
301, 302, 303
Aiwa
338
Quasar
RCA/PROSCAN
You can use the supplied remote control to
operate Sony or non-Sony video equipment
that has an infrared sensor.
Admiral (M. Ward)
Audio Dynamic
Bell & Howell (M. Ward)
Broksonic
Canon
327
314, 337
330
319, 317
304, 305, 308, 309, 311,
329, 312, 313, 310
309, 330, 328, 335, 324, 338
314
Realistic
Sansui
Samsung
Sanyo
Scott
Sharp
Signature 2000 (M. Ward)
Sylvania
Symphonic
SV2000
Tashiro
Tatung
Teac
Technics
Teknica
Toshiba
Wards
Yamaha
Zenith
309, 308
322, 313, 321
1 Set the VTR 1/ 2/ 3/ DVD/ MDP switch to
the input through which you would like
to access your video equipment.
Citizen
332
330, 335
Craig
302, 332
312, 313, 321, 335, 323, 324, 325, 326
Curtis Mathis
Daewoo
DBX
Dimensia
Emerson
Fisher
304, 338, 309
341, 312, 309
314, 336, 337
304
327, 328
338, 327
308, 309, 338, 310
The following Sony equipment is preset to
each input as shown below:
338
338
332
319, 320, 316, 317, 318, 341
330, 335
VTR1 (303)
VTR2 (302)
VTR3 (301)
Beta, ED Beta VCRs
8 mm VCR
VHS VCR
Funai
338
314, 336, 337
314, 336, 338, 337
309, 308
General Electric
Go Video
Goldstar
329, 304, 309
340, 339, 322
332
338
312, 311
327, 328, 335, 331, 332
330, 314, 336, 337
331
DVD/ MDP (751)
DVD Player
Hitachi
306, 304, 305, 338
Instant Replay
JC Penney
JVC
Kenwood
LXI (Sears)
Magnavox
Marantz
309, 308
2 Press CODE SET, DVD/ VTR (FUNCTION),
and the 0-9 buttons to enter the
309, 305, 304, 330, 314, 336, 337
314, 336, 337
314, 336, 332, 337
332, 305, 330, 335, 338
308, 309, 310
314, 336, 337
332
manufacturer’s code number (see the
following chart), then press ENTER.
MDP m a n u fa ct u re r co d e n u m b e rs
For example, to operate a Sony 8mm VCR:
Marta
Ma n u fa ct u re r
Sony
Panasonic
Mitsubishi
Co d e
FUNCTION
DVD/VTR
Memorex
309, 335
ENTER
701
704, 710
702
CODE SET
Minolta
305, 304
3
0
2
Mitsubishi/MGA
Multitech
NEC
323, 324, 325, 326
325, 338, 321
314, 336, 337
309, 308
Olympic
If t h e re m o t e co n t ro l d o e sn ’t w o rk
See the tips on page 53.
Optimus
327
•
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Video Equipment (continued)
DVD Pla ye r m a n u fa ct u re r co d e
n u m b e rs
To search the picture Press ) or 0 during
forward or backward playback. Release to resume
normal playback.
Operating a VCR using the remote control
Press DVD/VTR (POWER).
[Green Button]
To turn On/Off
Ma n u fa ct u re r
Co d e
To search a chapter Press CH +/–.
forward or backward
To select a channel
To change channels
To record
Press the 0 – 9 buttons.
Press CH +/–.
Sony
751
753
752
755
Panasonic
Pioneer
RCA
Press
while
(REC) (upper).
Operating a DVD Player using the remote
control
pressing
Toshiba
754
To play
Press (.
Press p.
Tips z
To turn On/Off
Press DVD/VTR (POWER).
[Green Button]
To stop
•
In some rare cases, you may not be able to operate
To fast forward
To rewind the tape
To pause
Press ).
Press 0.
your non-Sony video equipment with the supplied
remote control. In this case, please use the
equipment' s own remote control.
To play
To stop
To pause
Press (.
Press p.
Press P. Press again to
Press P. Press again to
resume normal playback.
•
When you remove the batteries, the code number may
revert to the factory setting.
resume normal playback.
To search the
picture forward or
backward
Press ) or 0 during
playback. Release to
resume normal playback.
To step through
different tracks of
an audio disc
Press ) to step forward or
0 to step backward.
To o p e ra t e vid e o e q u ip m e n t
To change input
mode
1 Set the VTR1/ 2/ 3/ DVD/ MDP switch to
the input through which you would like to
access your video equipment.
Press TV/VTR.
To step through
different chapters
of a video disc
Press CH + to step forward
or CH – to step backward.
2 Press DVD/ VTR (FUNCTION).
Operating an MDP using the remote
control
To display the Title
menu
Press TITLE.
3 Use the VCR/ DVD/ MDP operation
buttons indicated in the following tables.
To turn On/Off
Press DVD/VTR (POWER).
[Green Button]
To select DVD
multilingual sound
Press AUDIO repeatedly.
[Pink Labeled Button]
To play
To stop
To pause
To display the DVD Press DVD MENU.
menu
Press (.
Press p.
To select tracks
directly
Press 0-9 buttons.
Press P. Press again to
resume normal playback.
To display the
menu (Set up)
Press MENU.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating a Cable Box or Satellite Receiver (SAT)
Ma n u fa ct u re r co d e n u m b e rs
(sa t e llit e re ce ive r)
To o p e ra t e t h e p ro je ct io n TV
Se t t in g t h e Ma n u fa ct u re r' s
Co d e
Press TV (FUNCTION). Then use the
projection TV control buttons to control the
projection TV.
Ma n u fa ct u re r
Co d e n u m b e r
You can program the supplied remote control
to operate a cable box or satellite receiver.
Sony
801 (preset code for
remote control)
802, 808
805
Geneal Electric
Hitachi
Press CODE SET, SAT/ CABLE
Tips z
(FUNCTION), and the 0-9 buttons to enter
the manufacturer’s code number (see the
following chart), then press ENTER.
Hughes
804
803
802
Panasonic
RCA/PROSCAN
Toshiba
•
If more than one code number is listed, try entering
them one by one until you come to the correct code for
your equipment.
806, 807
For example, to operate a Sony satellite
receiver:
•
•
If you enter a new code number, the code number you
previously entered at that setting is erased.
To o p e ra t e t h e ca b le b o x o r
FUNCTION
ENTER
CODE SET
SAT/CABLE
sa t e llit e re ce ive r (SAT)
1 Press SAT/ CABLE (POWER) [Green
Button] to turn on/ off the cable box or
satellite receiver.
8
0
1
In some rare cases, you may not be able to operate
your equipment with the supplied remote control. In
this case, use the equipment’s own remote control
unit.
2 Press SAT/ CABLE (FUNCTION).
3 For other operations, refer to the
operating instructions that come with the
equipment.
Ma n u fa ct u re r co d e n u m b e rs
(ca b le b o x)
•
Whenever you remove the batteries — to replace
them, for example — if too much time is taken, the
code numbers may revert to the factory setting and
must be reset.
Ma n u fa ct u re r
Hamlin/Regal
Jerrold/G. I.
Co d e
222, 223, 224, 225, 226
201, 202, 203, 204, 205,
222, 206, 207, 208, 218
227, 228, 229
The GUIDE and INDEX (blue-labeled)
buttons can be used only with a satellite
receiver.
Oak
Panasonic
Pioneer
219, 220, 221
214, 215
Scientific Atlanta
Tocom
Zenith
209, 210, 211
If t h e re m o t e co n t ro l d o e sn ’t w o rk
216, 217
212, 213
•
Try repeating the set up procedures using
the other codes listed for your equipment.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If, after reading the following instructions, you have additional questions related to the use of your Sony projection TV, please call one of the following
numbers (English only).
Customers in the continental United States contact the Direct Response Center at: 1-800-222-SONY (7669)
Customers in Canada contact the Customer Relations Center at: (416) 499-SONY (7669)
The picture turns off and the
TIMER/STAND BY indicator on the
• The projection TV is equipped with a self-diagnosis function. If there is a problem with your projection TV, the TIMER/STAND BY indicator on the front
panel will flash repeatedly. Counting the number of flashes helps you inform qualified Sony personnel of the projection TV’s condition.
front panel flashes (self-diagnosis • Press POWER on the projection TV to turn it off, then inform qualified Sony personnel or the above Direct Response Center of the number of flashes.
function)
No picture (screen not lit), no
sound
• Make sure the power cord is plugged in.
• Operate with the buttons on both the projection TV and the remote control.
• Check to see if the TV/VIDEO setting is correct: when watching TV, set to TV, and when watching video tapes, set to VIDEO 1, 2, 3, 4 or 5.
• Try another channel. It could be station trouble.
• Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see “To perform AUTO SET UP again” on page 20)
• The Parental Control feature is activated. (see “To deactivate the Parental Control feature” on page 41)
Remote control does not
operate
• Batteries could be weak. Replace the batteries.
• Press TV (FUNCTION) when operating your projection TV.
• Make sure the projection TV’s power cord is connected securely to the wall outlet.
• Locate the projection TV at least 3-4 feet away from fluorescent lights.
• Check the S-Link connection. (see “Using the S-Link Function” on page 16)
• Check the polarity of the batteries.
Dark, poor or no picture
(screen lit), good sound
• Adjust “Picture” in the Video menu. (see “Picture Adjustment” on page 30)
• Adjust “Brightness” in the Video menu. (see “Picture Adjustment” on page 30)
• Check antenna/cable connections.
• Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see “To perform AUTO SET UP again” on page 20)
• Adjust the convergence again using the FLASH FOCUS button. (see “Adjusting the Convergence Automatically (FLASH FOCUS)” on page 20)
Good picture, no sound
• Press MUTING so that “Muting” disappears from the screen. (see “MUTING” on page 21)
• Check the “MTS/SAP” setting in the Audio menu. (see “MTS/SAP” on page 31)
• Make sure “Speaker” is set to “On” in the Audio menu. (see “Speaker” on page 32)
• Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see “To perform AUTO SET UP again” on page 20)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Cannot receive upper channels
(UHF) when using an antenna
• Make sure “Cable” is “Off” in the Channel Set Up menu. (see “Cable” on page 35)
• Use “Auto Program” to add receivable channels that are not presently in the TV’s memory. (see “Auto Program” on page 35)
No color
• Adjust “Color” in the Video menu. (see “Picture Adjustment” on page 30)
• Black and white programs cannot be seen in color.
• Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see “To perform AUTO SET UP again” on page 20)
Only snow and noise appear on
the screen
• Check the “Cable” setting in the Channel Set Up menu. (see “Cable” on page 35)
• Check the antenna/cable connections.
• Make sure the channel is broadcasting programs.
• Press ANT to change the input mode. (see “ANT” on page 23)
Dotted lines or stripes
• Adjust the antenna.
• Keep the projection TV away from noise sources such as cars, neon signs or hair-dryers.
TV is fixed to one channel
Double images or ghosts
Cannot operate the menu
• Use “Auto Program” to add receivable channels that are not presently in TV’s memory. (see “Auto Program” on page 35)
• Use a highly directional outdoor antenna or a cable (when the problem is caused by reflections from nearby mountains or tall buildings).
• If the item you want to choose appears in gray, you cannot select it.
• Press the projection TV’s power button off and on again.
Cannot receive any channels
when using cable TV
• Make sure “Cable” is “On” in the Channel Set Up menu. (see “Cable” on page 35)
• Use “Auto Program” to add receivable channels that are not presently in the TV’s memory. (see “Auto Program” on page 35)
Cannot gain enough volume when • Increase the volume at the cable box. Then press TV (FUNCTION) and adjust the projection TV’s volume.
using a cable box
Projection TV malfunctions when • Make sure the projection TV’s power cord is connected securely to the wall outlet.
using the S-Link function
• Check the S-Link connection. (see “Using the S-Link Function” on page 16)
CHANNEL INDEX does not display • Make sure “Cable” is “On” in the Channel Set Up menu. (see “Cable” on page 35)
all available channels
• Use “Auto Program” to add receivable channels that are not presently in the TV’s memory. (see “Auto Program” on page 35)
Favorite Channel does not display • Verify that “Favorite Channel” is set to “Manual” in the Channel Set Up menu. (see “Setting Favorite Channel manually” on page 36)
your choices
Some video sources do not
• Ensure that “Video Label” is not set to “Skip.” (see “Video Label” on page 39)
appear when you press TV/VIDEO
Recording through MONITOR OUT • MONITOR OUT will not record both images in PIP or P&P. Only the main picture will be recorded.
does not function properly when
recording in PIP or P&P mode
• If you are recording the main picture and you switch to the sound of the sub picture using the AUDIO button, the main picture will be recorded with sound
from the other program.
Cannot play shooting games
• Some shooting games which involve pointing a light beam at the TV screen with an electronic gun or rifle cannot be used with this projection TV. For
details, see the instruction manual supplied with the video game software.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
VIDEO 4/5 IN
Y: 1 Vp-p, 75 ohms, sync negative
PB: 0.7 Vp-p, 75 ohms
Pro je ct io n syst e m
3 picture tubes, 3 lenses, horizontal in-line
system
Ma ss
68.8 kg (151 lbs 11 oz) (KP-48V80)
76.0 kg (167 lbs 9 oz) (KP-53V80)
93.6 kg (206 lbs 6 oz) (KP-61V80)
Su p p lie d a cce sso rie s
PR: 0.7 Vp-p, 75 ohms
Pict u re t u b e
AUDIO (phono jacks): 500 mVrms (100%
modulation), Impedance: 47 kilohms
TV OUT/MONITOR OUT
7-inch high-brightness monochrome tubes (6.3
raster size), with optical coupling and liquid
cooling system
Remote control RM-Y905 (1)
Batteries (2) size AA (R6)
VIDEO (phono jack): 1 Vp-p, 75-ohms
unbalanced, sync negative
Pro je ct io n le n se s
High performance, large diameter hybrid lens
F1.05
Te le visio n syst e m
American TV standard
Ch a n n e l co ve ra g e
VHF: 2–13/ UHF: 14 –69/ CATV: 1 – 125
An t e n n a
Op t io n a l a cce sso rie s
Connecting cables
RK-G34, RK-74A, RK-G69HG, VMC-10HG,
VMC-720M, VMC-810S/ 820S, YC-15V/ 30V
U/ V mixer EAC-66
AUDIO (phono jacks): 500 mVrms (100%
modulation), Impedance: 470 ohms
AUDIO (VAR/FIX) OUT (phono jacks): 500
mVrms (100% modulation), Impedance: 470
ohms
Design and specifications are subject to change
without notice.
S-LINK: minijacks
CONTROL S OUT: minijack
Sp e a ke r
75 ohm external terminal for VHF/ UHF
Scre e n size (m e a su re d d ia g o n a lly)
48 inches (KP-48V80)
53 inches (KP-53V80)
61 inches (KP-61V80)
Tweeter: 66 mm (2 5/ 8”) × 2
Woofer: 130 mm (5 1/ 8”) × 2 (KP-48V80/ 53V80)
160 mm (6 3/ 8”) × 2 (KP-61V80)
Sp e a ke r o u t p u t
In p u t s/o u t p u t s
20 W × 2
Po w e r re q u ire m e n t
VIDEO 1/3 IN
VIDEO 2 INPUT
120 V AC, 60 Hz
Po w e r co n su m p t io n
In use (Max.): 170 W
In standby: 1 W
S VIDEO IN (4-pin mini DIN):
Y: 1 Vp-p, 75-ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO (phono jack): 1 Vp-p, 75-ohms
unbalanced, sync negative
AUDIO (phono jacks): 500 mVrms (100%
modulation), Impedance: 47 kilohms
Dim e n sio n s (W/H/D)
1,105 × 1,338 × 579 mm (43 1/ 2 × 52 5/ 8 × 22 3/ 4
inches) (KP-48V80)
1,216 × 1,417 × 632 mm (47 7/ 8 × 55 3/ 4 × 24 7/ 8
inches) (KP-53V80)
1,370 × 1,560 × 670 mm (54 × 61 3/ 8 × 26 3/ 8
inches) (KP-61V80)
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
CHANNEL INDEX .......................... 28 DISPLAY button ............................... 22
Video ............................................. 30
A
Channel Set Up menu
DVD
connection ..................................... 12
operation ....................................... 52
Adjusting sliders ............................... 18
ANT button ....................................... 23
Antenna cable ...................................... 5
Antenna connector ............................. 4
M
ch
operations
......................... 34, 35
Manufacturer code numbers ...... 51-53
MDP operation .................................. 52
MENU button .................................... 29
Menu selection .................................. 29
Mode ............................................. 21, 30
(Vivid/ Standard/ Movie/
Channel Skip/ Add ........................... 35
Coaxial cable .................................... 4, 5 DVD/ VTR (FUNCTION) .......... 51, 52
Color ................................................... 30
Connecting Projection TV to
amplifier that supports Dolby Pro
Audio button
............................... 23
E
Editing using MONITOR OUT....... 11
Effect ................................................... 31
AUDIO/ INDEX button ....... 25, 27, 53
Audio menu operations ........ 31, 32
Audio Out .......................................... 32
(Fixed/ Variable)
Audio/ Video Cable ............................ 4
Auto Program ............................. 19, 35
AUTO SET UP ................................... 19
Auto Volume ..................................... 31
AUX Hookup ................................ 5, 23
Logic decoder ............................... 15
(Trusurround/ Simulated/ Off )
Personal 1/ Personal 2)
antenna ............................................ 4
Movie rating ...................................... 44
MTS/ SAP ..................................... 23, 31
(Stereo/ SAP/ Mono/ Auto SAP)
MUTING button ............................... 21
F, G
audio system ................................ 14
Factory settings ........................... 30, 31
AV receiver ................................... 13
Favorite Channel
cable ................................................. 4
Selecting ........................................ 37
cable box .......................................... 5
Setting ............................................ 36
cable box and VCR ........................ 6
N
FLASH FOCUS ........................... 20, 39
camcorder ..................................... 10
Noise Reduction ................................ 30
FREEZE/ GUIDE
B
DTV receiver ................................... 9
DVD Player ................................... 12
satellite receiver (SAT) .................. 7 H, I
satellite receiver (SAT) and
VCR .............................................. 8 Hue ..................................................... 30
Sony SAVA series speaker
system ........................................ 14
two VCRs ...................................... 11
O
button .................... 22, 25, 27, 28, 53
Balance ............................................... 31
Bass ..................................................... 31
Battery installation ........................... 18
Brightness .......................................... 30
On Line Help ..................................... 18
On/ Off Timer .................................... 33
Operating video equipment ............ 51
Hook Ups ............................................. 4
P, Q
C
J, K
Parental Control .......................... 38, 40
Parental Control menu
Cable ............................................... 4, 35
Cable box
Joystick ......................................... 18, 29
JUMP button ...................................... 22
Change Password ........................ 46
Country ......................................... 40
Custom Rating ....................... 42, 45
Parental Lock .......................... 40, 41
Rating ............................................ 41
Password ............................................ 40
VCR .................................................. 6
connection ....................................... 5
operation ....................................... 53
Caption Vision CC ..................... 23, 38
CATV cable .......................................... 5
CH +/ – ................................... 21, 25, 26
CHANNEL +/ – ................................ 19
Channel Caption ............................... 34
L
CONTROL S OUT jack ...................... 4
Language ........................................... 38
Convergence ...................................... 20
Learning menus
Current Time ..................................... 33
Audio ............................................. 31
Channel Set Up ............................ 34
Set Up ............................................ 38
D
Daylight Savings ............................... 33
Direct Play ......................................... 39
Timer ............................................. 33
(continued)
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Index (continued)
Picture ................................................ 30
S
Surround ............................................ 31 V, W
Picture Adjustment .......................... 30
(Picture/ Brightness/ Color/ Hue/
Sharpness)
Picture and Picture (P&P)................ 26
Picture-in-Picture (PIP) .................... 24
PICTURE MODE button .................. 21
PIP/ P&P operations
ACTIVE B/ b .......................... 24, 26
AUDIO .................................... 25, 27
CH+/ – ..................................... 25, 26
CHANNEL INDEX ..................... 28
FREEZE ................................... 25, 27
(P & P) ...................................... 26
(PIP) .......................................... 24
POSITION ..................................... 24
SWAP ...................................... 25, 27
TV/ VIDEO ............................. 24, 26
SWAP button ............................... 25, 27
S-Link cable ......................................... 4
S-Link connector ......................... 16, 17
S-Link function .................................. 16
S Video cable ....................................... 4
Safety .................................................... 2
SAP ..................................................... 31
SAT/ CABLE (FUNCTION) ............ 53
Satellite receiver (SAT) operation ... 53
SET UP button ................................... 19
VCR
connection ............................. 6, 8, 11
operation ....................................... 52
Video Label ........................................ 39
T, U
Timer menu operations
............. 33
Treble .................................................. 31
Trinitone ............................................. 30
Troubleshooting .......................... 54, 55
TV (FUNCTION) button .................. 21
TV POWER button ........................... 21
TV rating ............................................ 43
TV/ VIDEO button ............................ 22
TV/ VTR button ................................ 23
Video menu operations
.............. 30
VOL +/ – ............................................. 21
VOLUME +/ – ................................... 19
X
XDS ..................................................... 23
Set Up menu operations
....... 38, 39
Y, Z
Setting Up the Projection TV
Y/ PB/ PR ................................... 9, 12, 16
Automatically ............................... 19
Sharpness ........................................... 30
Skip/ Add ........................................... 35
SLEEP button .................................... 23
Sliders ................................................. 18
Speaker ............................................... 32
(On/ Off/ SAVA SP/ Center)
Specifications ..................................... 56
Splitter .................................................. 6
SYSTEM OFF button ........................ 23
R
Remote control .................................. 18
Graphic Illustration ....(inside cover)
RESET button ........................ 24, 30, 31
If, after reading this instruction manual, you
have additional questions related to the use of
your Sony projection TV, please call one of the
following numbers (English only).
Customers in the continental United States
contact the Direct Response Center at:
1-800-222-SONY (7669)
Customers in Canada contact the
Customer Relations Center at:
(416) 499-SONY (7669)
Printed in U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|