4-120-891-11(1)
To find out useful hints, tips and information about Sony products and services
z
Operating Instructions
Blu-ray Disc / DVD Player
BDP-S350
4-120-891-11(1)
Printed in Malaysia
© 2008 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice for customers in the
United Kingdom and
Republic of Ireland
A molded plug complying with
BS1363 is fitted to this equipment
for your safety and convenience.
Should the fuse in the plug
supplied need to be replaced, a 5
AMP fuse approved by ASTA or
BSI to BS1362, (i.e., marked with
WARNING
To reduce the risk of fire or electric
shock, do not expose this apparatus
to rain or moisture.
To avoid electrical shock, do not
open the cabinet. Refer servicing to
qualified personnel only.
Disposal of waste
or
mark) must be used.
batteries (applicable in
the European Union and
other European countries
with separate collection
systems)
This symbol on the battery or on
the packaging indicates that the
battery provided with this product
shall not be treated as household
waste.
By ensuring these batteries are
disposed of correctly, you will help
prevent potentially negative
consequences for the environment
and human health which could
otherwise be caused by
inappropriate wastehandling of the
battery. The recycling of the
materials will help to conserve
natural resources.
If the plug supplied with this
equipment has a detachable fuse
cover, be sure to attach the fuse
cover after you change the fuse.
Never use the plug without the fuse
cover. If you should lose the fuse
cover, please contact your nearest
Sony service station.
Batteries or batteries installed
apparatus shall not be exposed to
excessive heat such as sunshine,
fire or the like.
CAUTION
The use of optical instruments with
this product will increase eye
hazard. As the laser beam used in
this Blu-ray Disc/DVD player is
harmful to eyes, do not attempt to
disassemble the cabinet.
Refer servicing to qualified
personnel only.
Disposal of Old Electrical
& Electronic Equipment
(Applicable in the
European Union and
other European countries
with separate collection
systems)
This symbol on the product or on
its packaging indicates that this
product shall not be treated as
household waste. Instead it shall be
handed over to the applicable
collection point for the recycling of
electrical and electronic
equipment. By ensuring this
product is disposed of correctly,
you will help prevent potential
negative consequences for the
environment and human health,
which could otherwise be caused
by inappropriate waste handling of
this product. The recycling of
materials will help to conserve
natural resources. For more
In case of products that for safety,
performance or data integrity
reasons require a permanent
connection with an incorporated
battery, this battery should be
replaced by qualified service staff
only.
To ensure that the battery will be
treated properly, hand over the
product at end-of-life to the
applicable collection point for the
recycling of electrical and
electronic equipment.
This label is located on the laser
protective housing inside the
enclosure.
For all other batteries, please view
the section on how to remove the
battery from the product safely.
Hand the battery over to the
applicable collection point for the
recycling of waste batteries.
This appliance is classified as a
CLASS 1 LASER product. The
CLASS 1 LASER PRODUCT
MARKING is located on the laser
protective housing inside the
enclosure.
detailed information about
recycling of this product, please
contact your local Civic Office,
your household waste disposal
service or the shop where you
purchased the product.
For more detailed information
about recycling of this product or
battery, please contact your local
Civic Office, your household
waste disposal service or the shop
where you purchased the product.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
The manufacturer of this product is
Sony Corporation, 1-7-1 Konan
Minato-ku Tokyo, 108-0075
Japan. The Authorized
• Clean the disc with a cleaning
cloth. Wipe the disc from the
centre out.
Precautions
Representative for EMC and
product safety isSony Deutschland
GmbH, Hedelfinger Strasse 61,
70327 Stuttgart, Germany. For any
service or guarantee matters please
refer to the addresses given in
separate service or guarantee
documents.
On safety
• To prevent fire or shock
hazard, do not place objects
filled with liquids, such as
vases, on the player, or place
the player near water, such as
near a bathtub or shower room.
Should any solid object or
liquid fall into the cabinet,
unplug the player and have it
checked by qualified
• Do not use solvents such as
benzine, thinner,
Precautions
commercially available disc/
lens cleaners, or anti-static
spray intended for vinyl LPs.
• If you have printed the disc’s
label, dry the label before
playing.
• Do not use the following discs.
– A disc that has a non-
standard shape (e.g., card,
heart).
• This unit operates on 220 V –
240 V AC, 50 Hz/60 Hz. Check
that the unit’s operating voltage
is identical with your local power
supply.
• To prevent fire or shock hazard,
do not place objects filled with
liquids, such as vases, on the
apparatus.
• Install this unit so that the mains
lead can be unplugged from the
wall socket immediately in the
event of trouble.
personnel before operating it
any further.
• Do not touch the AC power
cord (mains lead) with wet
hands. Doing so may cause an
electric shock.
– A disc with a label or sticker
on it.
On placement
• Place the player in a location
with adequate ventilation to
prevent heat build-up in the
player.
– A disc that has cellophane
tape or sticker adhesive on it.
• Do not resurface the playing
side of a disc to remove
surface scratches.
Notes About the Discs
• To keep the disc clean, handle
the disc by its edge. Do not
touch the surface.
Dust, fingerprints, or scratches
on the disc may cause it to
malfunction.
• Do not place the player on a
soft surface such as a rug that
might block the ventilation
holes.
• Do not install this player in a
confined space, such as a
bookshelf or similar unit.
• Do not place the player in a
location near heat sources, or
in a place subject to direct
sunlight, excessive dust, or
mechanical shock.
• If the player is brought directly
from a cold to a warm location,
or is placed in a very damp
room, moisture may condense
on the lenses inside the player.
Should this occur, the player
may not operate properly. In
this case, remove the disc and
leave the player turned on for
about half an hour until the
moisture evaporates.
• Do not expose the disc to
direct sunlight or heat sources
such as hot air ducts, or leave it
in a car parked in direct
sunlight as the temperature
may rise considerably inside
the car.
• After playing, store the disc in
its case.
• Do not install the player in an
inclined position. It is
designed to be operated in a
horizontal position only.
• Keep the player and the discs
away from equipment with
strong magnets, such as
microwave ovens, or large
loudspeakers.
,continued
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not place heavy or unstable
objects on the player.
• This Blu-ray Disc/DVD player
incorporates High-Definition
Multimedia Interface
On cleaning
Clean the cabinet, panel, and
controls with a soft cloth slightly
moistened with a mild detergent
solution. Do not use any type of
abrasive pad, scouring powder
or solvent such as alcohol or
benzine.
• Do not place any objects other
than discs on the disc tray.
Doing so may cause damage to
the player or the object.
• When you move the player,
take out any discs. If you
don’t, the disc may be
(HDMI™) technology.
HDMI, the HDMI logo and
High-Definition Multimedia
Interface are trademarks or
registered trademarks of
HDMI Licensing LLC.
• “Blu-ray Disc” is a trademark.
• “Blu-ray Disc,” “DVD+RW,”
“DVD-RW,” “DVD+R,”
“DVD-R,” “DVD VIDEO,”
and “CD” logos are
damaged.
On cleaning discs, disc/
lens cleaners
Do not use cleaning discs or
disc/lens cleaners (including wet
or spray types). These may cause
the apparatus to malfunction.
• When you move the player,
disconnect the AC power cord
(mains lead) and all other
cables from the player.
trademarks.
• “BD-Live” and “BonusView”
are trademarks of Blu-ray Disc
Association.
• “x.v.Colour” and “x.v.Colour”
logo are trademarks of Sony
Corporation.
• “BRAVIA Sync” is a
trademark of Sony
Corporation.
• “PhotoTV HD” and the
“PhotoTV HD” logo are
trademarks of Sony
Corporation.
• Other system and product
names are generally
On power sources
• The player is not disconnected
from the AC power source
(mains) as long as it is
connected to the wall outlet,
even if the player itself has
been turned off.
• If you are not going to use the
player for a long time, be sure
to disconnect the player from
the wall outlet. To disconnect
the AC power cord (mains
lead), grasp the plug itself;
never pull the cord.
• Observe following points to
prevent the AC power cord
(mains lead) being damaged. If
the AC power cord (mains
lead) is damaged, it may result
in a fire or an electric shock.
– Do not pinch the AC power
cord (mains lead) between
the player and wall, shelf,
etc.
– Do not put anything heavy
on the AC power cord
(mains lead) or pull on the
AC power cord (mains lead)
itself.
On replacement of parts
In the events that this player is
repaired, repaired parts may be
collected for reuse or recycling
purposes.
Copyrights and
Trademarks
• This product incorporates
copyright protection
technology that is protected by
U.S. patents and other
intellectual property rights.
Use of this copyright
protection technology must be
authorized by Macrovision,
and is intended for home and
other limited viewing uses
only unless otherwise
authorized by Macrovision.
Reverse engineering or
disassembly is prohibited.
• “AVCHD” and the “AVCHD”
logo are trademarks of
Matsushita Electric Industrial
Co., Ltd. and Sony
trademarks or registered
trademarks of the
manufacturers. ™ and ®
marks are not indicated in this
document.
IMPORTANT NOTICE
Caution: This player is
capable of holding a still
video image or on-screen
display image on your
television screen
indefinitely. If you leave the
still video image or on-
screen display image
displayed on your TV for an
extended period of time you
risk permanent damage to
your television screen.
Plasma display panel
televisions and projection
televisions are susceptible to
this.
Corporation.
• Java and all Java-based
trademarks and logos are
trademarks or registered
trademarks of Sun
On adjusting volume
Do not turn up the volume while
listening to a section with very
low level inputs or no audio
signals. If you do, the speakers
may be damaged when a peak
level section is played.
Microsystems, Inc.
•
, “XMB,” and “xross media
bar” are trademarks of Sony
Corporation and Sony
Computer Entertainment Inc.
If you have any questions or
problems concerning your
player, please consult your
nearest Sony dealer.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
About this manual
• In this manual, “disc” is used
as a general reference for the
BDs, DVDs, or CDs unless
otherwise specified by the text
or illustrations.
• Icons, such as
, listed
BD
at the top of each explanation
indicate what kind of media
can be used with the function
being explained.
For details, see “Playable
• Instructions in this manual
describe the controls on the
remote. You can also use the
controls on the player if they
have the similar symbols as
those on the remote.
• The on-screen display
illustrations used in this
manual may not match the
graphics displayed on your TV
screen.
• NEED-to-know information
(to prevent incorrect
operation) is listed under the
b icon. NICE-to-know
information (tips and other
useful information) is listed
under the z icon.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Hooking Up the Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Step 1: Connecting to Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Step 4: Connecting to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Step 7: Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Playing BDs/DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Playing Photo Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Video Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
BD/DVD Viewing Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Resetting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Video Output Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Before operating the player, please read “Terms and Conditions of Use and End User License
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Opens or closes the disc tray.
Guide to Parts and
Controls
THEATRE (page 16)
Switches to the optimum video mode for
watching movies automatically. When
connected with an AV amplifier
(receiver) using the HDMI cable, the
speaker output also switches
For more information, see the pages in
parentheses.
automatically. Press the button again to
return to the original setting.
When connected with a Theatre Mode-
compatible TV using the HDMI cable,
the TV’s video mode switches to Theatre
Mode.
Remote
b
The THEATRE button functions only when
connected to a Theatre Mode-compatible TV.
Turns on the TV, or sets to standby mode.
Turns on the player, or sets to standby
mode.
Enters the title/chapter numbers, etc.
CLEAR
Clears the entry field.
Displays the elapsed/remaining playback
time in the front panel display. Each time
you press the button, the display switches
between elapsed playback time and
remaining playback time.
Selects the language track when multi-
lingual tracks are recorded on BD-
ROMs/DVD VIDEOs.
Selects the sound track on CDs.
SUBTITLE (page 47)
Selects the subtitle language when multi-
lingual subtitles are recorded on BD-
ROMs/DVD VIDEOs.
ANGLE
Switches to other viewing angles when
multi-angles are recorded on BD-ROMs/
DVD VIDEOs.
Number 5, AUDIO, PROG +, and N buttons have
a tactile dot. Use the tactile dot as a reference when
operating the player.
Displays the playback information on the
screen.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
When you press and hold the button, fast
forward/fast reverse continues at the
selected speed until you release the
button.
* Search speed does not change when playing
CDs.
D Colour buttons (red/green/
yellow/blue)
Short cut keys for selecting items on
some BD’s menus (can also be used for
BD’s Java interactive operations).
Opens or closes the BD’s or DVD’s Top
Menu.
Speed multiple values are approximate.
– To resume normal playback, press N.
POP UP/MENU (page 32)
Opens or closes the BD-ROM’s Pop-up
Menu, or the DVD’s menu.
Starts or re-starts playback.
Resumes playback from the point where
you press x (Resume Play).
Plays a slideshow when a disc containing
JPEG image files is inserted.
The options menu that can be selected
appears on the screen.
Switches to Scene Search mode that lets
you move quickly between scenes within
the title currently being played back.
HOME (page 39)
Enters the player’s home menu.
Exits the home menu when a CD is
inserted.
X (pause)
Pauses or re-starts playback.
RETURN
Returns to the previous display.
x (stop)
Stops playback and remembers the stop
The resume point for a title/track is the
last point you played or the last photo for
a photo folder.
</M/m/,
Moves the highlight to select a displayed
item.
Centre button (ENTER)
Enters the selected item.
G For TVs operable with the following
F ./> (previous/next)
Skips to the previous/next chapter, track,
or file.
% (muting)
Mutes the TV sound.
To go to the beginning of the previous
track, press . twice.
2 (volume) +/–
Adjusts the TV volume.
/
(instant replay/instant
advance)
Replays the scene/briefly fast forwards
PROG (programme) +/–
Selects the TV channels up and down.
the scene.
t (input select)
Switches between TV and other input
sources.
m/M
(fast reverse/fast forward)
Fast reverses/fast forwards the disc when
pressed during playback.
Each time you press the button, search
speed changes as follows*:
Playback direction
M1 (×10) t M2 (×30) t M3
(×120)
Reverse direction
n (×1) t m1 (×10) t m2 (×30)
t m3 (×120)
,continued
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel
Turns on the player, or sets to standby
mode.
To lock the disc tray (Child Lock)
You can lock the disc tray to prevent it being
opened by mistake.
When the player is turned on, hold down X
on the player for more than 10 seconds until
“LOCKED” appears in the front panel
display. The disc tray is locked.
C Blu-ray Disc indicator
Lights up when a BD is recognised.
z
To unlock the disc tray, hold down X on the
player until “UNLOCK” appears in the front
panel display.
When the player is turned on for the first time,
the Blu-ray Disc indicator lights up, then turns
off when Easy Setup is complete.
Lights up when outputting 1080p/24 Hz
video signals of BD-ROMs.
G N (play), X (pause), x (stop)
Starts, pauses, or stops playback.
Opens or closes the disc tray.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel display
A N, X
F Network connection indicator
Lights up when downloading the player’s
software.
Lights up during playback or pause.
For details on downloading the player’s
Lights up when outputting 720p/1080i/
1080p video signals from the HDMI
OUT jack or 720p/1080i video signals
from the COMPONENT VIDEO OUT
jacks.
Lights up when an HDMI device is
connected.
Lights up when the external memory is
recognised.
E Playback information
You can check the time information.
Press TIME repeatedly during playback.
The display changes as follows.
When playing a BD-ROM/DVD VIDEO
Elapsed time of the current title
r
Remaining time of the current title
When playing a CD
Elapsed time of the current track
r
Remaining time of the current track
r
Elapsed time of the current disc
r
Remaining time of the current disc
z
“T” (Title or Track), “C” (Chapter), or “D”
(Disc) may be displayed depending on the
disc.
,continued
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
A COMPONENT VIDEO OUT
E Ventilation holes
The ventilation fan is inside the player.
B LINE OUT (S VIDEO) jack
G DIGITAL OUT (OPTICAL/
COAXIAL) jacks (page 21)
C LINE OUT (R-AUDIO-L) jacks
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the Player
Check that you have the following items.
• Audio/video cable (phono plug ×3) (1)
• Mains lead (1)
• Remote commander (remote) (1)
• R6 (size AA) batteries (2)
Follow steps 1 through 7 to hook up and
adjust the settings of the player. Do not
connect the mains lead until you reach
Hookups and
Settings
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Connecting to Your TV
About video/HDMI OUT jacks
The player has the following video jacks. Connect the player to your TV according to the input
jack on your TV.
When connecting the player to your TV using the HDMI cable, you can enjoy high quality
digital pictures and sound through the HDMI OUT jack.
Jack type
Video resolution Hookup
High
quality
Digital
High Definition:
1080/24p, 1080p,
1080i, 720p
See “Connecting to an
Standard Definition:
576p/480p, 576i/
480i
Analogue
High Definition:
1080i, 720p
See “Connecting to
Standard Definition: jacks (Y, Pb/Cb, Pr/
576p/480p, 576i/
480i
Standard Definition: See “Connecting to an
576i/480i
VIDEO jack”
Standard Definition: See “Connecting to an
576i/480i
VIDEO jack”
Standard
quality
b
To connect to a TV with DVI input
Use an HDMI-DVI converter cable (not
supplied). The DVI jack will not accept any
audio signals, so you have to use another
audio connection in addition to this
• Plug in cables securely to prevent unwanted
noise.
• Refer to the instructions supplied with the
components to be connected.
• You cannot connect this player to a TV that does
not have a video input jack.
Furthermore, you cannot connect the HDMI
OUT jack to DVI jacks that are not HDCP
compliant (e.g., DVI jacks on PC displays).
• Do not apply too much pressure on the connecting
cables. Pushing against the cabinet wall, etc., may
damage the cable.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an HDMI jack
Connect the player and your TV using an HDMI cable to enjoy high quality digital pictures and
sound through the HDMI OUT jack.
refer to the operating instructions supplied with the TV.
If you connect a 1080/24p- or 1080p-compatible TV, use a High Speed HDMI cable.
Blu-ray Disc/DVD player
HDMI cable (not supplied)
TV
• Be sure to disconnect the HDMI cable when
moving the player.
Notes on connecting to the HDMI OUT jack
Observe the following as improper handling
may damage the HDMI OUT jack and the
connector.
• Carefully align the HDMI OUT jack on the
rear of the player and the HDMI connector
by checking their shapes. Make sure the
connector is not upside down or tilted.
• If you place the player on a cabinet with the
HDMI cable connected, do not apply too
much pressure to the cabinet wall. It may
damage the HDMI OUT jack or the HDMI
cable.
• When connecting or disconnecting, do not
screw in or rotate the HDMI connector.
,continued
15
Download from Www.Somanuals.com. All Manuals Search And Download.
• Theatre
About indicators for HDMI connection
When connecting an HDMI compatible
component, the HDMI indicator lights up in
the front panel display.
When you press THEATRE, the player
automatically switches to the optimum
video mode for watching movies. When
connected with an AV amplifier (receiver)
using the HDMI cable, the speaker output
also switches automatically. When
connected with a Theatre Mode-compatible
TV using the HDMI cable, the TV’s video
mode switches to Theatre Mode. Press the
button again to return to the original setting.
• Language Follow
b
• Consumers should note that not all high definition
television sets are fully compatible with this
product and may cause artifacts to be displayed in
the picture. In the case of 480i/480p/576p/720p/
1080i/1080p scan picture problems, it is
recommended that the user switch the connection
to the ‘standard definition’ output. If there are
questions regarding our TV set compatibility with
this model 480i/480p/576p/720p/1080i/1080p
Blu-ray Disc/DVD player, please contact our
customer service centre.
When you change the language for the on-
screen display on your TV, the player’s
language for the on-screen display is also
changed after turning the player off and on.
• If the picture is not clear, not natural or not to your
satisfaction, change the video output resolution in
• Be sure to use only an HDMI cable that bears the
HDMI logo.
To prepare for the BRAVIA Sync features
Set “Control for HDMI” to “On” in the
For details on settings of your TV or other
connected components, refer to the operating
instructions supplied with the TV or
components.
About the BRAVIA Sync
features (for HDMI connections
only)
z
• When connecting the Sony TV that is compatible
with the “Control for HDMI” Easy Setting
function using the HDMI cable, the “Control for
HDMI” setting of the player automatically
switches to “On” if the “Control for HDMI”
setting on the connected TV is set to “On.” Refer
to the operating instructions supplied with the
TV.
By connecting Sony components that are
compatible with the “Control for HDMI”
function with an HDMI cable (not supplied),
operation is simplified as below:
• One-Touch Play
With one touch of the following buttons, the
connected TV turns on and the input
selector on the TV is switched to the player
automatically.
• When connecting the Sony TV that is compatible
with the BRAVIA Sync features using the HDMI
cable, you can control the basic functions of the
player with the TV’s remote if the “Control for
HDMI” setting on the connected TV is set to
“On.” Refer to the operating instructions supplied
with the TV.
– [/1
– HOME: The home menu appears
– N: Playback starts automatically
• System Power-Off
When you turn off the TV using the power
button on the TV’s remote, the player and
HDMI-compatible components turn off
automatically.
b
Depending on the connected component, the
“Control for HDMI” function may not work. Refer
to the operating instructions supplied with the
component.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to component video jacks (Y, PB/CB, PR/CR)
Connect the COMPONENT VIDEO OUT jacks of the player and your TV using a component
video cable or three video cables (not supplied) of the same kind and length. You can enjoy
high-quality pictures.
Be sure to connect to the LINE OUT (R-AUDIO-L) jacks using the audio/video cable.
Blu-ray Disc/DVD player
(green)
(blue)
(red)
(red)
(white)
Component video
cable (not supplied)
Audio/video cable
(supplied)
(red)
(white)
(green)
(blue)
(red)
Match the colour of the plug to that
of the jack.
Match the colour of the plug to
that of the jack.
TV
: Signal flow
b
When you connect the player and TV using a
component video cable, disconnect the video plug
(yellow) of the audio/video cable.
,continued
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an audio/video or S VIDEO jack
Connect the LINE OUT (VIDEO, R-AUDIO-L) jacks of the player and your TV using the
audio/video cable. You can enjoy standard quality pictures and sound.
Blu-ray Disc/DVD player
(yellow)
(red)
(white)
or
S-video cable
(not supplied)
Audio/video cable
(supplied)
(yellow)
(red)
(white)
Match the colour of the plug to
that of the jack.
TV
: Signal flow
b
When you connect the player and TV using an S-
video cable, disconnect the video plug (yellow) of
the audio/video cable.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Connecting to Your AV Amplifier (Receiver)
About audio/HDMI OUT jacks
The player has the following audio jacks. Connect the player to your AV amplifier (receiver)
according to the input jack on your AV amplifier (receiver).
Jack type
Hookup
Digital
Analogue
z
For correct speaker location, refer to the operating
instructions supplied with the connected
components.
b
• When you connect the player to your AV
amplifier (receiver) using an HDMI cable, do one
of the following:
– Connect your AV amplifier (receiver) to your
TV using an HDMI cable, or
– Connect the player to your TV using a video
cable other than an HDMI cable (component
video cable, S-video cable, or audio/video
cable).
• If you connect a component that does not conform
to the selected audio signal, a loud noise (or no
sound) will come from the speakers, which could
damage your ears or the speakers.
,continued
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an HDMI jack
If your AV amplifier (receiver) has an HDMI input, you can enjoy surround sound.
If you connect a Sony AV amplifier (receiver) that is compatible with the “Control for HDMI”
Blu-ray Disc/DVD player
HDMI cable (not supplied)
AV amplifier (receiver)
HDMI cable (not supplied)
TV
z
b
Set the following settings and you can enjoy higher
quality sound from the connected AV amplifier
(receiver).
Not all HDMI-compatible AV amplifiers
(receivers) accept 8ch Linear PCM signals. Refer as
well to instructions supplied with the connected AV
amplifier (receiver).
– Set “Audio Output Priority” to “HDMI” in the
– Set “Audio (HDMI)” to “Auto” in the “Audio
– Set “BD Audio Setting” to “Direct” in the “Audio
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to digital jacks (OPTICAL/COAXIAL)
*1
*2
If your AV amplifier (receiver) has a Dolby Digital, Dolby Pro Logic, or DTS decoder and
a digital input jack, you can enjoy Dolby Digital (5.1ch), Dolby Pro Logic (4.0ch), or DTS
(5.1ch) surround effects.
Blu-ray Disc/DVD player
or
Optical digital cable
(not supplied)
Coaxial digital cable
(not supplied)
AV amplifier (receiver)
: Signal flow
*1
*2
1 Connect the digital jack of the player
and your AV amplifier (receiver).
2 Set “Audio Output Priority” to
“Coaxial/Optical” in the “Audio
3 Make the appropriate settings in
“Dolby Digital” and “DTS” under the
Otherwise, no sound or a loud noise will
come from your speakers.
,continued
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to audio L/R jacks
If your AV amplifier (receiver) only has L and R audio input jacks, use this connection.
Blu-ray Disc/DVD player
(red)
(white)
Audio/video cable (supplied)
(red)
(white)
Match the colour of the plug
to that of the jack.
AV amplifier (receiver)
: Signal flow
22
Download from Www.Somanuals.com. All Manuals Search And Download.
b
• Do not connect anything other than a USB flash
memory, such as an HDD, etc., to the EXT slot.
• Insert the external memory straight. If you force
the external memory into the slot, this will cause
damage to both the external memory and the
player.
• Keep the external memory away from small
children to prevent them from accidentally
swallowing the external memory.
• Do not apply too much pressure to the external
memory in the slot, as it may cause a malfunction.
• We recommend use of the Sony USM1GH
available as of April 2008.
• Other USB flash devices may support this
function. However we cannot guarantee
compatibility with all USB flash memories.
• When inserting a USB flash memory other than
Sony USM1GH, check the insertion direction
before inserting it.
Step 3: Inserting the
External Memory
To enjoy additional content (such as
BonusView/BD-Live) on certain Blu-ray
Disc titles, you will need to use external
memory.
Insert the external memory device (1 GB or
larger USB flash memory, such as Sony
USM1GH) into the EXT slot as your local
storage.
Insert the external memory in the V
direction into the EXT slot as far as it will
go.
Check that the EXT indicator lights up in the
front panel display when turning the player
on.
• Depending on the USB flash memory, it may
stick out from the EXT slot. Do not force into the
slot or apply pressure to the protruding portion of
the USB flash memory.
Rear of the player
• To avoid data corruption or damage to the
external memory, turn the player off when
inserting or removing the external memory.
• When the EXT indicator does not light up, turn
the player off, remove and re-insert the external
memory, then turn the player on again.
• Do not insert the external memory that contains
photo or music files to avoid corrupting the
external memory data.
Sony USM1GH
(not supplied)
With the terminal side up
To remove the external memory
1
2
Press [/1 to turn the player off.
Pull out the external memory from the
EXT slot.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
When connecting to a
Step 4: Connecting to
the Network
broadband router directly
Blu-ray Disc/DVD player
Connect the LAN (100) terminal of the player
to your Internet source using a network cable
to update the player’s software. You can also
1 Connect the LAN (100) terminal of the
player to your Internet source.
Methods to connect to your Internet
source include:
• Connecting to a broadband router
directly
Network cable
(not supplied)
• Connecting via a wireless LAN router
Refer also to the instructions supplied
with the broadband router or the wireless
LAN router.
Broadband router
To PC
2 Make the appropriate settings in
“Internet Settings” under the
Network cable
(not supplied)
To update the player’s software using the
network
ADSL modem/
Cable modem
b
Do not connect a phone line to the LAN (100)
terminal, as it may cause a malfunction.
To enjoy the BD-Live function
Internet
About network (LAN) cables
Depending on the modem or router, the type
of network (LAN) cable, straight or crossing,
differs. For details on the network (LAN)
cables, refer to the operating instructions
supplied with the modem or router.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
When connecting via a
wireless LAN router
Step 5: Connecting the
Mains Lead
Blu-ray Disc/DVD player
After all of the other connections are
complete, connect the supplied mains lead
(AC power cord) to the AC IN terminal of the
player. Then plug the player and TV mains
leads (AC power cords) into the mains.
Network cable
(not supplied)
to AC IN
1
2
Ethernet/wireless
LAN media converter
to mains
To PC
Wireless LAN router
(access point)
Network cable
(not supplied)
ADSL modem/
Cable modem
Internet
b
Do not connect the LAN terminal of the player to
the LAN terminal of the PC.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling TVs with the
remote
Step 6: Preparing the
Remote
You can control the volume, input source,
programme position, and power switch of
your Sony TV with the supplied remote.
You can control the player using the supplied
remote. Insert two R6 (size AA) batteries by
matching the 3 and # ends on the batteries
to the markings inside the battery
b
When you replace the batteries of the remote, the
code number may be reset to the default setting. Set
the appropriate code number again.
compartment. When using the remote, point
it at the remote sensor
on the player
TV [/1
Number
buttons
b
• Use the batteries correctly to avoid possible
leakage and corrosion. Should leakage occur, do
not touch the liquid with bare hands. Observe the
following:
– Do not use a new battery with an old battery, or
batteries of different manufacturers.
– Do not attempt to recharge the batteries.
– If you do not intend to use the remote for an
extended period of time, remove the batteries.
– If battery leakage occurs, wipe out any liquid
inside the battery compartment, and insert new
batteries.
t
%
2 +/–
PROG +/–
• Do not expose the remote sensor (marked
the front panel) to strong light, such as direct
sunlight or a lighting apparatus. The player may
not respond to the remote.
on
Available buttons
Depending on the connected unit, you may
not be able to control your TV with some or
all of the buttons (TV
[
/1
,
PROG +/–
,
2
+/–,
%, or number buttons).
Buttons
Operations
Turns your TV on or off.
TV [/1
2 (volume) +/– Adjusts the volume of
your TV.
PROG
Selects the programme
(programme) +/– position on your TV.
t (input select) Switches your TV’s input
source between the TV
and other input sources.
% (muting)
Mutes the sound.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
To control other TVs with the remote
You can control the volume, input source,
programme position, and power switch of
non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer’s code.
Step 7: Easy Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
player. If you do not complete Easy Setup, it
will appear each time you turn on your
player.
b
If you enter a new code number, the code number
previously entered will be erased.
Make the settings below in the following
order.
1
While holding down TV [/1, enter the
TV’s manufacturer code using the
number buttons.
When turned on for the first time
Wait for a short while before the player
turns on and starts Easy Setup.
For instance, to enter “09,” press “0” then
“9.”
Code numbers of controllable TVs
If more than one code number is listed,
try entering them one at a time until you
find the one that works with your TV.
[/1
TV [/1
Manufacturer
Sony
Code number
01 (default)
Hitachi
24
JVC
33
LG/Goldstar
Panasonic
Philips
76
</M/m/,,
ENTER
17, 49
06, 08, 72
71
RETURN
HOME
Samsung
Sharp
29
Toshiba
38
2
Release TV [/1.
1 Turn on the TV.
2 Press [/1 to turn on the player.
The player turns on after a moment.
3 Switch the input selector on your TV so
that the signal from the player
appears on your TV screen.
The display for OSD language selection
appears.
• If the display for OSD language
selection does not appear
Press HOME, and select “Easy Setup”
select “Start,” and press ENTER.
,continued
27
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Select a language for the on-screen
displays using M/m, and press
ENTER.
7 Select a video output resolution for
the connected TV, and press ENTER.
For details about the video output
When you select “HDMI” in step 6
The initial settings message appears.
5 Select “Start,” and press ENTER.
Select from “Auto,” “480i/576i,” “480p/
576p,” “720p,” “1080i,” or “1080p.”
When connecting the HDMI OUT jack
and other video output jacks at the same
time, video signals may not output from
the jacks, other than from the HDMI
OUT jack, when “Auto” or “1080p” is
selected.
When connecting other equipment at the
same time, press RETURN to return to
step 6 and change the “TV Connection
Method” setting.
6 Select the cable type used to connect
the player and your TV, and press
ENTER.
When you select “Component Video” in
step 6
Select “HDMI” when connecting your
TV using the HDMI cable, and go to step
Select from “480i/576i,” “480p/576p,”
“720p,” or “1080i.”
When you change the video output
resolution, a picture is displayed in the
selected resolution for about 30 seconds,
then the display asks for confirmation.
Follow the on-screen instructions and go
to the next step.
b
When connecting the HDMI OUT jack and
other video output jacks at the same time,
select “Component Video.”
Select “Component Video” when
connecting your TV using the component
video cable, and go to step 7.
Select “Video or S Video” when
connecting your TV using the video
cable or S-video cable, and go to step 8.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
b
10 Select “Allow” to allow Internet
connections from BD contents, and
press ENTER.
If the picture is distorted or no picture appears,
wait for about 30 seconds without pressing any
buttons. The display returns to the resolution
setting screen.
If the selected video output resolution is
incorrect, no picture will appear on the screen
when you press any button within that
30 seconds. In this case, press x on the player
for more than 10 seconds to reset the video
output resolution to the lowest resolution. To
change the video output resolution, set
“Output Video Format” in the “Video
Select “Do not allow” to not allow
Internet connections from BD contents.
8 Select an aspect ratio that matches
your TV, and press ENTER.
11 Select “Quick Start” to shorten the
startup time from standby mode, and
press ENTER.
Select “16:9” when connecting to a wide-
screen TV or a TV with a wide mode
function.
Select “4:3” when connecting to a 4:3
screen TV without a wide mode function.
For details about “Standby Mode,” see
12 Select “Finish,” and press ENTER.
9 (Only when connecting your TV using
the HDMI cable)
Set the “Control for HDMI” function to
“On” or “Off,” and press ENTER.
z
• You can reset settings to their factory settings
Select “On” to use the “Control for
HDMI” function when connecting Sony
components that are compatible with the
If you do not use the “Control for HDMI”
function, select “Off.”
• You can run “Easy Setup” again from “Easy
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing BDs/DVDs
BD
DVD
Z
Number
buttons
</M/m/,,
ENTER
OPTIONS
HOME
N
X
x
1 Switch the input selector on your TV so
that the signal from the player
appears on your TV screen.
Playback
2 Press Z, and place a disc on the disc
tray.
Playing side facing down
3 Press Z to close the disc tray.
• When you insert a commercially
available BD-ROM or DVD VIDEO,
playback automatically starts
depending on the disc.
b
Playback does not start by pressing N while
the disc tray is open.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
b
4 Press HOME.
• The point where you stopped playing is cleared
from memory when:
5 Select “Video” using </,.
– you open the disc tray,
– you play another title,
– you change the settings on the player, or
– you remove the external memory (for BD-
ROMs).
6 Select using M/m, and press N or
ENTER.
• The player may not resume playback depending
on the disc or stop point.
To play restricted BDs or DVDs (Parental
Control)
When you play a restricted BD, change the
“BD Parental Control” setting in the “BD/
When you play a restricted DVD, the display
for entering your password appears on the
screen.
Enter your four-digit password using the
number buttons, and press ENTER.
Playback starts.
For commercially available BD-ROMs
or DVD VIDEOs, playback starts.
For BDs or DVDs recorded on other
equipment, the title list appears. Select a
title using M/m, and press N or
ENTER.
Playback starts.
To register or change the password, see
To stop playback
Press x.
To play restricted BD-REs or BD-Rs (Disc
Lock)
When you play a BD-RE or BD-R restricted
by the Disc Lock function, the display for
entering your password appears on the
screen.
To pause playback
Press X.
z
In the title list, “PL” (Playlist) is displayed next to
the name of titles that are created and edited from
their originals.
1
Enter the four-digit password that has
been registered when creating the disc
using the number buttons, and press
ENTER.
b
• Depending on the disc you may not be able to do
some of the playback operations. Refer to the
instruction manual supplied with the disc.
• Depending on BDs or DVDs recorded on other
equipment, title lists or title names may not be
displayed.
2
Select a title, and press N or ENTER.
Playback starts.
One-Touch Play (for HDMI connection
only)
Press N.
The player and the connected TV turn on and
the input selector on the TV is switched to the
player, then playback starts automatically.
To resume playback from the point where
you stopped (Resume Play)
After stopping playback, select
m, and press N or ENTER.
The player resumes playback from the point
using M/
where you pressed x.
b
• When using the HDMI connection, there may be
a delay before the playback picture appears on the
screen, and the beginning portion of the playback
picture may not be displayed.
• To use the One-Touch Play function, set “Control
for HDMI” to “On” in the “System Settings”
To start from the beginning, press OPTIONS
to select “Play from start,” and press ENTER.
Playback starts from the beginning of the
title.
,continued
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Available OPTIONS
Using the BD’s or DVD’s menu
1
Press OPTIONS.
The options menu appears.
BD DVD
2
Select an item using M/m, and press
ENTER.
The available items differ depending on
the disc type or player situation.
To display Top Menu
When you play a BD or DVD, you can
display the Top Menu.
1
2
Press TOP MENU during playback.
The Top Menu appears.
Items
Details
A/V Settings
Adjusts settings for
picture and sound.
• Video Settings
Select an item using </M/m/,.
To display Pop-up Menus
Some BD-ROMs contain Pop-up Menus that
appear without interrupting playback.
• Audio Settings
1
2
Press POP UP/MENU during playback.
The Pop-up Menu appears.
Title List
Play
Displays the title list.
Plays the title from the
point where you pressed
x.
Select an item using </M/m/,, colour
buttons, or the number buttons, and
follow the on-screen instructions.
Play from start Plays the title from the
beginning.
Top Menu
Displays the disc’s Top
Menu/Popup Displays the BD-
Menu
ROM’s Pop-up Menu or
Stop
Stops playback.
Title Search
Searches for a title and
starts playback from the
beginning (page 34).
Chapter
Search
Searches for a chapter
and starts playback
from the beginning
32
Download from Www.Somanuals.com. All Manuals Search And Download.
z
• To delete all data in the external memory at once,
select “Erase All” in step 5.
Enjoying BonusView/BD-Live
skip step 5.
BD
Some BD-ROMs have bonus contents and
other data that can be downloaded to the
external memory (local storage) for
enjoyment.
b
Depending on the BD-ROM, the disc name may not
be displayed.
1 Turn the player off.
Searching for a scene quickly
(Scene Search)
2 Insert the external memory (not
supplied) into the EXT slot on the rear
of the player.
BD DVD
The external memory is used as the local
storage.
Make sure that the external memory is
properly inserted into the player
You can move quickly between scenes within
the title currently being played back.
1 Press SCENE SEARCH during playback
or in pause mode.
3 Connect the player to a network
Playback pauses and a bar with a scene
indicator (square-shaped – indicates the
current point) appears at the bottom of
the screen.
4 Turn the player on.
5 Set “BD Internet Connection” to
“Allow” in the “BD/DVD Viewing
2 Move the scene indicator to the scene
you are searching for using </, or
m/M.
6 Insert a BD-ROM with BonusView/BD-
Scene indicator
Live.
The operation method differs depending
on the disc. Refer to the instruction
manual supplied with the disc.
To delete data in the external memory
You can delete unnecessary data.
1
2
3
Press HOME.
The current point
Select “Video” using </,.
The scene indicator on the bar is
displayed around the playing point.
Select “BD Data” using M/m, and press
ENTER.
3 Release the button at the point you
4
Select the disc name, and press
OPTIONS.
want to watch.
The scene at which you released the
button is displayed in pause mode.
To search for a scene again, move the
scene indicator using </, or m/
M.
5
6
Select “Erase,” and press ENTER.
Select “OK,” and press ENTER.
The data of the selected disc will be
deleted.
4 Press SCENE SEARCH, ENTER, N, or
X.
Playback starts.
,continued
33
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel Scene Search mode
Press SCENE SEARCH, ENTER, N, or X.
Playback starts from the point you pressed
the button.
Displaying the playing time and
play information
DVD
BD
b
You can check the title information,
including the video transmission rate, etc.
• The Scene Search function is available for titles
longer than 100 seconds and shorter than 100
hours.
• The Scene Search function may not be available
depending on the disc.
Press DISPLAY.
The displayed information differs depending
on the disc type and player status.
Searching for a Title/Chapter
Example: When playing a BD-ROM
BD
DVD
You can search for a chapter if the title
contains chapter marks.
1 Press OPTIONS during playback or in
pause mode.
The options menu appears.
2 Select a search method using M/m,
and press ENTER.
“Title Search” (for BD-ROMs/DVD
VIDEOs)
“Chapter Search”
A The current selected angle
B Title number or name
The display for entering the number
appears.
Example: Chapter Search
C The currently selected audio or subtitle
setting
D Available functions (
audio/ subtitle)
angle/
E Playback information
Displays Disc type/Play mode/Video
codec/Bit rate/Playing status bar/
Playing time (Remaining time*)
F Output resolution/Video frequency
3 Enter the number of the title or chapter
using the number buttons.
* Displayed when you press TIME repeatedly.
If you make a mistake, press CLEAR,
and re-enter another number.
z
• You can also check the playback information in
• Press SUBTITLE, AUDIO, or ANGLE, and you
can check each type of information.
4 Press ENTER.
After a while, the player starts playback
from the selected number.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
b
• Set the picture setting of your TV to ‘Standard’
before changing the “Picture Quality Mode”
settings.
Adjusting pictures and sound
for videos
• “Video Settings” is not available when the
• Depending on the disc or the scene being played,
“FNR,” “BNR” or “MNR” effects may be hard to
discern.
DVD
BD
To adjust the picture
1
2
3
Press OPTIONS during playback.
The options menu appears.
To adjust the audio characteristics
Select “A/V Settings” using M/m, and
press ENTER.
1
2
3
Press OPTIONS during playback.
The options menu appears.
Select “Video Settings” using M/m, and
press ENTER.
Select “A/V Settings” using M/m, and
press ENTER.
The “Video Settings” screen appears.
Select “Audio Settings” using M/m, and
press ENTER.
The “Audio Settings” screen appears.
4
Select an item using M/m, and press
ENTER.
The default settings are underlined.
4
Select an item using M/m, and press
ENTER.
The default settings are underlined.
Items
Details
PictureQuality Optimises the picture
Mode
settings for different
(Standard/
Brighter Room
lighting environments.
Items
Details
/
AV SYNC
(short) 0 ~
120 msec
(long)
Adjusts the gap between
picture and sound, by
delaying the sound
output in relation to the
picture output (0 to
120 milliseconds).
Theatre Room
)
FNR
(Off/Auto)
Reduces random noise
appearing in the picture.
BNR
(Off/Auto)
Reduces mosaic-like
block noise in the
picture.
Audio Filter
(for analogue
audio signals
only)
• Sharp: Provides a
wide frequency range
and spatial feeling.
Normally select this.
• Slow: Provides
smooth and warm
sound.
MNR
(Off/Auto)
Reduces minor noise
around the picture
outlines (mosquito
noise).
5
Select or adjust the settings using </M/
m/,, and press ENTER.
To adjust any other items, repeat steps 4
5
Select or adjust the settings using </M/
m/,, and press ENTER.
To adjust any other items, repeat steps 4
and 5.
,continued
35
Download from Www.Somanuals.com. All Manuals Search And Download.
b
• The “Audio Filter” function does not work for
digital audio signals output from the HDMI OUT/
DIGITAL OUT (OPTICAL/COAXIAL) jacks.
• There may be little effect by changing the “Audio
Filter” setting depending on the disc or playback
environment.
Playing CDs
CD
1 Insert a CD.
The Music Player screen appears.
2 Press N.
Playback starts.
To select a track
1
2
3
Press HOME.
Select
(Music) using </,.
Select , and press ENTER.
The music list appears.
4
Select a track using M/m.
To play the selected track, press N or
ENTER.
Available OPTIONS
1
Press OPTIONS.
The options menu appears.
2
Select an item using M/m, and press
ENTER.
The available items differ depending on
the situation.
Items
Details
Play
Plays the selected track.
Play from start Plays the current track
from the beginning.
Stop
Stops playing the track.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Various music playback operations
Playing Photo Files
Buttons
Operations
N
Starts playback from the
point where you pressed x.
*1
*2
*3
BD
DATA DVD
DATA CD
*1
*2
BD-REs/BD-Rs containing JPEG image files
DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs
containing JPEG image files
x
Stops playback.
Pauses playback.
X
*3
CD-RWs/CD-Rs containing JPEG image files
./>
Skips to the beginning of the
current or next track. To go
to the previous track press
. twice.
1 Press HOME.
2 Select
(Photo) using </,.
m/M
Fast reverse/fast forwards
when pressed during
playback.
TIME
Switches time information
on the screen and the front
b
The point where you stopped playing (resume
point) is cleared from memory when:
– you open the disc tray, or
3 Select , and press ENTER.
– you turn off the player.
The file list or folder list appears.
4 Select a file or folder using M/m, and
press ENTER.
When you select a folder, select a file in
the folder using M/m, and press ENTER.
The selected photo file is displayed.
• To play a slideshow, press N.
,continued
37
Download from Www.Somanuals.com. All Manuals Search And Download.
b
Available OPTIONS during playback
• When you attempt to play the following photo
1
Press OPTIONS during playback.
The options menu appears.
files, the
mark appears on the screen and they
cannot be played.
– photo files larger than 8,192 pixels (width or
height)
– photo files smaller than 15 pixels (width or
height)
2
Select an item using M/m, and press
ENTER.
The available items differ depending on
the situation.
– photo files exceeding 32 MB
– photo files with extreme aspect ratios (greater
than 50:1 or 1:50)
Items
Details
Slideshow
Speed
Changes the slideshow
speed.
• Fast
• Normal
• Slow
– photo files in Progressive JPEG format
– photo files that have a “.jpeg” or “.jpg”
extension, but not in JPEG format
– photo files that have an extremely long name
• The following photo files cannot be played.
– photo files recorded on BD-Rs in any format
other than UDF (Universal Disk Format) 2.6
– photo files recorded on BD-REs in any format
other than UDF (Universal Disk Format) 2.5
• The following photo files or folders cannot be
displayed in the file list or folder list.
– photo files that have an extension other than
“.jpeg” or “.jpg”
– photo files that have an extremely long name
– photo files in the 5th tree or lower
– 501th or more folders when the total number of
folders and files in a single tree exceeds 500
• Photo files edited on a PC may not be played.
• Thumbnail images of some photo files may not be
displayed.
Stop
Stops a slideshow.
Rotate Left
Rotates the photo
counterclockwise by 90
degrees.
Rotate Right
Rotates the photo
clockwise by 90
degrees.
Various photo playback operations
Buttons
Operations
x
Stops a slideshow.
RETURN
• Large photo files may take some time to display
or to start a slideshow.
X
Pauses a slideshow.
./>
Displays the previous or
next photo.
To view best quality images
If you have a Sony TV compatible with
“PhotoTV HD,” you can enjoy best quality
images by the following connection and
setting.
DISPLAY
Displays the file
information.
1
2
Connect the player to the TV using an
HDMI cable (not supplied).
Set the TV’s video setting to [VIDEO-A]
mode.
For details on [VIDEO-A], refer to the
operating instructions supplied with the
TV.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Settings
Displays
Select
(Setup) on the home menu when
you need to change the settings of the player.
1 Press HOME.
2 Select
(Setup) using </,.
3 Select the setup category icon to
change using M/m, and press ENTER.
For details on setting options and setup
category icons, see “Setting list”
Example: Video Settings
Settings and
Adjustments
4 Set the options.
,continued
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting list
You can setup the following options.
Network Update
Icon
Explanation
You can update and improve the functions of
the player.
For information about update functions, refer
to the following website;
Network Update (page 40)
Updates the software of the
player.
Video Settings (page 41)
Makes the video settings
according to the type of
connecting jacks.
1 Select “Network Update” using M/m,
and press ENTER.
Audio Settings (page 44)
Makes the audio settings
according to the type of
connecting jacks.
The player connects to the network, and
the display asks for confirmation.
2 Select “OK” using </,, and press
BD/DVD Viewing Settings
Makes detailed settings for BD/
DVD playback.
ENTER.
The player starts downloading, then
updating the software automatically.
When updating finishes, “FINISH”
appears for 5 seconds in the front panel
display, then the player automatically
turns off.
Photo Settings (page 49)
Makes the photo-related settings.
System Settings (page 50)
Makes the player-related
settings.
3 Press [/1 to turn on the player.
The player starts up with the updated
software.
Network Settings (page 51)
Makes detailed settings for
Internet and network.
z
Easy Setup (page 53)
Re-runs the Easy Setup to make
the basic settings.
• The “VUP */9” counter (“*” indicates update
step) in the front panel display also shows
progress of the update.
• You can check the current software version by
selecting “System Information” in the “System
• The “Setup” settings remain after updating.
• The player informs you of newer software version
information when “Software Update
Resetting (page 53)
Resets the player to the factory
settings.
b
• Do not disconnect the mains lead or network
cable while downloading or updating software.
• Any operations, including opening the disc tray,
are not available while updating.
• Downloading times may differ depending on the
server provider or line status.
• When error messages on network connections
appear, check the network settings (see “Internet
40
Download from Www.Somanuals.com. All Manuals Search And Download.
To update the software using an update
disc
You can update and improve the functions of
the player using an update disc provided by
Sony dealer or local authorised Sony service
facility.
Video Settings
The default settings are underlined.
1
2
Insert the update disc.
The display asks for confirmation.
TV Type
Selects your TV type.
Select “OK,” and press ENTER.
Software update starts.
When updating finishes, “FINISH”
appears for 5 seconds in the front panel
display, then the disc tray automatically
opens.
16:9
4:3
Select this when connecting
to a wide-screen TV or a TV
with a wide mode function.
Select this when connecting
to a 4:3 screen TV without a
wide mode function.
3
4
Remove the disc.
The player automatically turns off.
Press [/1 to turn the player on.
The player starts up with the updated
software.
Screen Format
Selects the display configuration for a 4:3
screen picture on a 16:9 wide screen TV.
z
Original
Select this when connecting
to a TV with a wide mode
function. Displays a 4:3
screen picture in 16:9 aspect
ratio even on a wide-screen
TV.
• The “VUP */9” counter (“*” indicates update
step) in the front panel display also shows
progress of the update.
• You can check the current software version by
selecting “System Information” in the “System
• The “Setup” settings remain after updating.
• For information about other software update
methods, refer to the following website or consult
your nearest Sony dealer or local authorised Sony
Service facility;
Fixed Aspect Changes the picture size to
Ratio
fit the screen size with the
original picture aspect ratio.
b
• Do not disconnect the mains lead while updating.
• Any operations, including opening the disc tray,
are not available while updating.
,continued
41
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Aspect Ratio
Output Video Format
Selects the display configuration for
playback of 16:9 screen pictures on a 4:3
screen TV (selectable when “TV Type” is set
to “4:3” and “Screen Format” is set to “Fixed
Aspect Ratio”).
Selects the jack type to output video signals
(“TV Connection Method”) and output
resolution(“HDMIResolution”/“Component
Resolution”).
1
2
Select “Output Video Format” in “Video
Settings,” and press ENTER.
Letter Box
Displays a wide picture with
black bands on the top and
bottom.
Select the jack type to output video
signals using M/m, and press ENTER.
Pan & Scan
Displays a full-height
picture on the entire screen,
with trimmed sides.
b
When connecting the HDMI OUT jack and
other video output jacks at the same time,
select “Component Video.”
Letter Box
TV Connection Method
HDMI
Outputs signals from
the HDMI OUT jack
according to the “HDMI
Resolution” setting
below.
Pan & Scan
Component
Video
Outputs signals from
the COMPONENT
VIDEO OUT jacks
according to the
“Component
b
Depending on the DVD, “Letter Box” may be
selected automatically instead of “Pan & Scan” or
vice versa.
Resolution” setting
below.
Video or
S Video
Outputs signals from
the LINE OUT VIDEO
or S VIDEO jack.
Cinema Conversion Mode
Sets the video conversion method for 480p/
576p, 720p, 1080i, or 1080p* signals from
the HDMI OUT jack or the COMPONENT
VIDEO OUT jacks.
3
(When you select “HDMI” or
“Component Video” only)
Select the signal type for the HDMI OUT
jack or COMPONENT VIDEO OUT
jacks using M/m, and press ENTER.
When you change the video output
resolution, a picture is displayed in the
selected resolution for about 30 seconds,
then the display asks for confirmation.
Follow the on-screen instructions.
* HDMI only
Auto
Normally select this. The
player automatically detects
whether the material is
video-based or film-based,
and switches to the
appropriate conversion
method.
The HD indicator lights up when
outputting 720p/1080i/1080p video
signals.
Video
The conversion method
suited for video-based
material will always be
selected regardless of the
material.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
b
• If the picture is distorted or no picture
appears, wait for about 30 seconds without
pressing any buttons. The display returns to
the resolution setting screen.
BD-ROM 1080/24p Output
Sets to output 1920 × 1080p/24 Hz video
signals when playing film-based materials on
BD-ROMs (720p/24 Hz or 1080p/24 Hz).
1920 × 1080p/24 Hz video signals can be
output when all of the following conditions
are met.
If the selected video output resolution is
incorrect, no picture will appear on the
screen when you press any button within that
30 seconds. In this case, press x on the
player for more than 10 seconds to reset the
video output resolution to the lowest
resolution.
– You connect a 1080/24p-compatible TV
using the HDMI OUT jack,
• When connecting the HDMI OUT jack and
other video output jacks at the same time,
video signals may not output from the jacks,
other than from the HDMI OUT jack, when
“Auto” or “1080p” is selected.
When connecting other equipment at the
same time, press RETURN to return to step
2 and change the “TV Connection Method”
setting.
– “Output Video Format” is set to “HDMI,”
and
– “HDMI Resolution” is set to “Auto” or
“1080p.”
The 24P indicator lights up when outputting
1920 × 1080p/24 Hz video signals.
Auto
Outputs 1920 × 1080p/
24 Hz video signals only
when connecting a 1080/
24p-compatible TV using
the HDMI OUT jack.
HDMI Resolution/Component Resolution
Auto (HDMI
only)
Normally select this.
The player outputs
signals starting from the
highest resolution
On
Off
Outputs 1920 × 1080p/
24 Hz video signals
regardless of the connected
TV type.
acceptable to the TV:
1080p > 1080i > 720p >
480p > 480i
If the resulting image
format is undesirable,
try another setting that
suits your TV.
Select this when your TV is
not compatible with 1080/
24p video signals.
b
480i/576i
480p/576p
720p
Outputs480i/576ivideo
signals.
No BD-ROM picture appears when the connected
TV is non-compatible with 1080/24p and “BD-
ROM 1080/24p Output” is set to “On.” In this case,
press HOME to display the home menu, and change
the “BD-ROM 1080/24p Output” setting.
Outputs 480p/576p
video signals.
Outputs 720p video
signals.
1080i
Outputs 1080i video
signals.
1080p (HDMI Outputs 1080p video
only) signals.
,continued
43
Download from Www.Somanuals.com. All Manuals Search And Download.
YCbCr/RGB (HDMI)
Audio Settings
Sets the colour setting for video signals
output from the HDMI OUT jack. Select the
setting that matches the connected TV type.
The default settings are underlined.
Auto
Automatically detects the
type of external device, and
switches to the matching
colour setting.
Audio Output Priority
Selects the jack type to output audio signals.
2-channel linear PCM signals are output at
48 kHz maximum from output jacks other
than the priority jacks.
YCbCr (4:2:2) Outputs YCbCr 4:2:2 video
signals.
YCbCr (4:4:4) Outputs YCbCr 4:4:4 video
HDMI
Outputs audio signals from
the HDMI OUT jack.
signals.
RGB (16-235) Select this when connecting
to a device with an HDCP-
Coaxial/
Optical
Outputs audio signals from
the DIGITAL OUT
(OPTICAL/COAXIAL)
jack.
compliant DVI jack.
RGB (0-255) Select this when connecting
to an RGB (0-255) device.
Stereo
Analogue
Outputs audio signals from
the LINE OUT (R-AUDIO-
L) jacks.
b
When selecting “RGB (0-255),” check that the
RGB (0-255) device and the player are connected
using the HDMI cable.
Audio (HDMI)
Selects the signal type for the HDMI OUT
jack.
x.v.Colour Output
Sets whether to send xvYCC information to
the connected TV.
Auto
Normally select this.
Outputs audio signals
Combining xvYCC-compatible video with a
TV that supports x.v.Colour display makes it
possible to more accurately reproduce object
colours present in the natural world.
according to the status of the
connected HDMI device.
2ch PCM
Downmixes to 2-channel
Linear PCM signals before
outputting from the HDMI
OUT jack.
Auto
Off
Normally select this.
Select this when the picture
is unstable or colours appear
unnatural.
b
Select “2ch PCM” when connecting a TV or an AV
amplifier (receiver) that does not support Dolby
Digital or DTS, otherwise noise or no sound may
result.
Pause Mode
Sets the picture mode for DVD playback
pause status. For BD-ROMs or discs
containing AVCHD files, “Pause Mode”
automatically switches to “Auto.”
Auto
Normally select this.
Dynamic moving pictures
appear without blurring.
Frame
Displays static pictures at
high resolution.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
BD Audio Setting
DTS
Selects whether to mix or not mix interactive
audio and secondary audio (commentary)
when playing a BD that contains such audio.
Selects the audio signals output when playing
DTS discs. This setting affects the output
from the DIGITAL OUT (COAXIAL/
OPTICAL) jack.
Mix
Outputs the audio obtained
by mixing the interactive
audio and secondary audio
to the primary audio.
Downmix
PCM
Converts to output Linear
PCM signals. Select this
when connecting to an audio
device without a built-in
DTS decoder.
Direct
Outputs the primary audio
only.
DTS
Select this when connecting
to an audio device with a
built-in DTS decoder.
b
PCM 96 kHz and PCM 192 kHz audio signals are
output as PCM 48 kHz audio signals when “BD
Audio Setting” is set to “Mix.”
48kHz/96kHz PCM
Audio ATT
Selects the maximum sampling frequency for
the PCM signals output from the DIGITAL
OUT (OPTICAL/COAXIAL) jack.
Lowers the audio output level to prevent
sound distortion.
48kHz/16bit
Outputs audio signals of
96 kHz sampling as 48 kHz/
16 bit.
On
Off
Enables Audio Attenuation.
Disables Audio Attenuation.
96kHz/24bit
Outputs audio signals of
96 kHz sampling as 96 kHz/
24 bit. However, the signals
will be output as 48 kHz/
16 bit if the source is copy-
protected.
b
“Audio ATT” does not affect the output from the
HDMI OUT jack and the DIGITAL OUT
(OPTICAL/COAXIAL) jack.
b
Dolby Digital
• If you select “96kHz/24bit” when an AV
amplifier (receiver) that does not support 96 kHz
is connected, no sound or a loud sound may
result.
• “48kHz/96kHz PCM” is not effective when
“Audio Output Priority” is set to “HDMI” or
“Stereo Analogue.”
Selects the audio signals output when playing
Dolby Digital discs.
This setting affects the output from the
DIGITAL OUT (COAXIAL/OPTICAL)
jack.
Downmix
PCM
Converts to output Linear
PCM signals. Select this
when connecting an audio
device without a built-in
Dolby Digital decoder.
Dolby Digital
Select this when connecting
an audio device with a built-
in Dolby Digital decoder.
,continued
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio DRC
Downmix
Selects the dynamic range (compression level
of the sound) setting when playing a BD or
DVD that conforms to “Audio DRC.”
Sets the downmix method of multi-channel to
two-channel sound.
Dolby
Surround
Outputs the Dolby Surround
(Pro Logic) signals in 2
channels. Select this when
connecting an audio device
that supports Dolby
Auto
Performs playback at the
dynamic range specified by
the disc (BD-ROM only).
Other discs are played back
at the “Standard” level.
Surround (Pro Logic).
Normal
Outputs audio signals
without Dolby Surround
(Pro Logic) effect. Select
this when connecting an
audio device that does not
support Dolby Surround
(Pro Logic).
Standard
Performs playback at a
compression level between
“TV Mode” and “Wide
Range.”
TV Mode
Sounds are compressed
heavily. Low sounds are
easier to hear.
b
Wide Range
No compression works. A
more dynamic sound is
produced.
“Downmix” has no effect on the bitstream audio
output from the DIGITAL OUT (OPTICAL/
COAXIAL)/HDMI OUT jack.
b
• “Audio DRC” is effective only when playing
Dolby Digital, Dolby Digital Plus, and Dolby
TrueHD audio signals.
• When “Dolby Digital” is set to “Dolby Digital” in
DRC” has no effect on the audio output from the
DIGITAL OUT (OPTICAL/COAXIAL) jack.
However, this excludes the following cases.
– when “BD Audio Setting” is set to “Mix” when
playing a BD.
– when “Audio Output Priority” is set to “HDMI”
or “Stereo Analogue.”
46
Download from Www.Somanuals.com. All Manuals Search And Download.
BD Parental Control
BD/DVD Viewing
Settings
Playback of some BD-ROMs can be limited
according to the age of the users. Scenes may
be blocked or replaced with different scenes.
The default settings are underlined.
1 Select “BD Parental Control” in “BD/
DVD Viewing Settings,” and press
ENTER.
BD/DVD Menu
Selects the default menu language for BD-
ROMs or DVD VIDEOs.
When you select “Select Language Code,”
the display for entering the language code
appears. Enter the code for your language by
2 Enter your four-digit password using
the number buttons.
3 Select “OK,” and press ENTER.
4 Select the age restriction, and press
ENTER.
The lower the value, the stricter the
limitation.
If you select “Select Age Restriction,”
you can enter the age from “0” to “255”
using </M/m/, or the number
buttons.
Audio
Selects the default track language for BD-
ROMs or DVD VIDEOs.
When you select “Original,” the language
given priority in the disc is selected.
When you select “Select Language Code,”
the display for entering the language code
appears. Enter the code for your language by
• To cancel the Parental Control setting,
select “No Restrictions.”
z
You can change the password (see “Password” on
page 49).
Subtitle
b
• If you forget the password, reset the player
Selects the default subtitle language for BD-
ROMs or DVD VIDEOs.
When you select “Select Language Code,”
the display for entering the language code
appears. Enter the code for your language by
• When you play discs which do not have the
Parental Control function, playback cannot be
limited on this player.
• Depending on the disc, you may be asked to
change the Parental Control level while playing
the disc. In this case, enter your password, then
change the level.
• When “255” is selected in “Select Age
Restriction,” the Parental Control setting is
cancelled.
,continued
47
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Parental Control
Parental Control Region Code
Playback of some DVD VIDEOs can be
limited according to the age of the users.
Scenes may be blocked or replaced with
different scenes.
Playback of some BD-ROMs or DVD
VIDEOs can be limited according to the
geographic area. Scenes may be blocked or
replaced with different scenes.
1 Select “DVD Parental Control” in “BD/ 1 Select “Parental Control Region
DVD Viewing Settings,” and press
ENTER.
Code” in “BD/DVD Viewing Settings,”
and press ENTER.
2 Enter your four-digit password using
the number buttons.
2 Enter your four-digit password using
the number buttons.
3 Select “OK,” and press ENTER.
3 Select “OK,” and press ENTER.
4 Select a level, and press ENTER.
The lower the value, the stricter the
limitation.
4 Select the area restriction, and press
ENTER.
When you select “Select Region Code,”
the display for entering the region code
appears. Enter the code for the area
restriction by referring to “Parental
• To cancel the Parental Control setting,
select “No Restrictions.”
z
You can change the password (see “Password” on
z
You can change the password (see “Password” on
page 49).
b
• If you forget the password, reset the player
b
• If you forget the password, reset the player
• When you play discs which do not have the
Parental Control function, playback cannot be
limited on this player.
• Depending on the disc, you may be asked to
change the Parental Control level while playing
the disc. In this case, enter your password, then
change the level.
• When you play discs which do not have the
Parental Control function, playback cannot be
limited on this player.
• Depending on the disc, you may be asked to
change the Parental Control level while playing
the disc. In this case, enter your password, then
change the level.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Password
Photo Settings
Sets or changes the password for the Parental
Control function. A password allows you to
set a restriction on BD-ROM or DVD
VIDEO playback. If necessary, you can
differentiate the restriction levels for BD-
ROMs and DVD VIDEOs.
The default setting is underlined.
Slideshow Speed
Changes the slideshow speed.
1 Select “Password” in “BD/DVD
Viewing Settings,” and press ENTER.
Fast
Photos change rapidly.
Normal
Photos change at normal
speed.
2 Enter your four-digit password using
the number buttons.
Slow
Photos change slowly.
3 Select “OK,” and press ENTER.
To change the password
1
2
the number buttons.
Select “OK,” and press ENTER.
Hybrid Disc Playback Layer
Selects the layer priority when playing a
Hybrid Disc. To change the setting, turn the
player off and on again.
BD
Plays BD layer.
DVD/CD
Plays DVD or CD layer.
BD Internet Connection
Sets whether to allow Internet connections
from the contents of a BD (in BDMV mode)
being played. Network connections and
settings are required when using this function
Allow
Normally select this.
Do not allow
Prohibits Internet
connection.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Display
System Settings
On
Automatically displays
information on the screen
when changing the viewing
titles, picture modes, audio
signals, etc.
The default settings are underlined.
OSD
Off
Displays information only
when you press DISPLAY.
Selects your language for the player on-
screen displays.
Screen Saver
Dimmer
The screen saver image appears when you do
not use the player for more than 15 minutes
while an on-screen display, such as the home
menu, is displayed on your TV screen. The
screen saver image helps prevent your
display device from becoming damaged
(ghosting).
Adjusts the lighting of the front panel display.
Bright
Dark
Off
Bright lighting.
Low lighting.
Turns off the lighting during
playback. Low lighting other
than during playback.
On
Turns on the screen saver
function.
Control for HDMI
Off
Turns off the function.
On
Allows you to use the
“Control for HDMI”
Software Update Notification
Informs you of newer software version
information. Network connections and
settings are required when using this function
Off
Turns off the function.
Standby Mode
On
Sets the player to inform you
of newer software version
information (page 40).
Quick Start
Shortens the startup time
from standby mode. You can
operate the player quickly
after turning it on.
Off
Turns off the function.
Normal
The default setting.
System Information
b
When “Standby Mode” is set to “Quick Start,”
– power consumption will be higher than when
“Standby Mode” is set to “Normal” and
– the ventilation fan may turn on depending on the
surrounding temperature.
Displays the player’s software version
information and the MAC address.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
b
When you set the “DNS Server (Primary)”/
“DNS Server (Secondary)” addresses
manually, enter the “DNS Server (Primary)”
address. Otherwise, the “Internet Settings”
will be set incorrectly.
Network Settings
Internet Settings
4 If your ISP has a specific proxy server
setting, select “Proxy Settings” using
M/m, and press ENTER.
These items are necessary when you connect
to the Internet via a network cable. Enter the
respective (alphanumeric) values for your
broadband router or Wireless LAN router.
The items that need to be set may differ,
depending on the Internet service provider or
the router. For details, refer to the instruction
manuals that have been provided by your
Internet service provider or supplied with the
router.
The “Proxy Settings” display appears.
If the proxy server does not have a
5 Set “Use of Proxy Server” to “On.”
6 Select “Proxy Server” and “Port,” and
enter the settings.
To enter the proxy server, see “To enter
1 Select“Internet Settings” in “Network
Settings,” and press ENTER.
7 Press RETURN.
2 Select “IP Address Acquisition,” and
press ENTER.
8 Select “Network Diagnostic” using M/
m, and press ENTER.
3 Select an item, and press ENTER.
9 Select “Start,” and press ENTER.
Use DHCP
Select this when DHCP
(Dynamic Host
10 Check that the message “Network
connections are correct.” appears.
The setup is finished. If the message does
not appear, follow the on-screen
messages.
Configuration Protocol)
server settings are
available from your
Internet service
provider. The network
settings necessary for
the player will be
assigned automatically.
Use Static IP Set the IP address
Address
manually according to
your network
environment.
• When you select “Use DHCP”
If you set “DNS Server Auto
Acquisition” to “Off,” set the following
item:
– DNS Server (Primary)/DNS Server
(Secondary)
• When you select “Use Static IP
Address”
Set the following items:
– IP Address
– Subnet Mask
– Default Gateway
– DNS Server (Primary)/DNS Server
(Secondary)
,continued
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Available buttons
To enter characters
The display for entering characters appears
when you select “Proxy Server” in “Proxy
Settings.”
Buttons
Details
Red button
(Letter Type)
Switches the keyboard
between alphabet and
numbers.
Green button
(A/a)
Switches the keyboard
between upper case and
lower case.
Yellow button
(Symbol)
Displays the keyboard for
symbols.
Blue button
(Finish)
The input is entered, and
the player returns to the
previous display.
1
Press a number button repeatedly to
select a character.
Example:
Press the number 3 button once to enter
“D.”
Press the number 3 button three times to
enter “F.”
CLEAR
Erases the selected
(Clear/Clear All) character.
To erase all displayed
characters, press and hold
CLEAR for 2 seconds or
more.
2
3
Press ,, and enter the next character.
RETURN
(Cancel)
Returns to the previous
display, cancelling the
input.
Press the blue button (“Finish”) to finish.
</M/m/,,
ENTER
• Select an input function
using </M/m/,, and
press ENTER.
• Enter characters as
follows: 1Select a
character selection panel
using </M/m/,, and
press ENTER. 2Selecta
character using </,,
and press ENTER.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Setup
Resetting
Re-runs the Easy Setup to make the basic
settings.
You can reset the player settings to the
factory default by selecting the group of
settings. All the settings within the group will
be reset.
1 Select “Easy Setup,” and press
ENTER.
1 Select “Resetting,” and press ENTER.
2 Select “Start” using </,, and
2 Select “Reset to Factory Default
press ENTER.
Settings,” and press ENTER.
3 Select the settings you want to reset to
default, and press ENTER.
The display asks for confirmation.
You can reset the following settings:
– Video Settings
– Audio Settings
– BD/DVD Viewing Settings
– Photo Settings
– System Settings
– Network Settings
– All Settings
4 Select “Start” using </,, and
press ENTER.
b
– the Blu-ray Disc indicator lights up, then turns off
when Easy Setup is complete.
– All settings within
(Setup) are reset.
– “A/V Settings” that can be adjusted by pressing
reset.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you experience any of the following
difficulties while using the player, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
Power
The power does not turn on.
, Check that the mains lead is connected
securely.
, It takes a short while before the player turns
on.
The message “A new software version has
been found on the network. Perform
update under "Network Update."” appears
on the screen when turning the player on.
the player to a newer software version.
Additional
Information
Disc
The disc does not play.
, The disc is dirty.
, The disc is upside down. Insert the disc with
the playback side facing down.
, The disc is skewed.
, You are attempting to play a disc with a
format that cannot be played back by this
, The region code on the BD or DVD does
not match the player.
, The player cannot play a recorded disc that
54
Download from Www.Somanuals.com. All Manuals Search And Download.
No BD-ROM picture appears.
, Check the “BD-ROM 1080/24p Output”
setting in the “Video Settings” setup
Picture
See also “Connecting to an HDMI jack”
(page 15) when connecting equipment using
the HDMI cable.
Sound
There is no picture/picture noise appears.
, Check that all the connecting cables are
securely connected.
, Check whether the connecting cables are
damaged.
See also “Connecting to an HDMI jack”
(page 20) when connecting equipment using
the HDMI cable.
and switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
, When playing a double-layer DVD, the
video and audio may be momentarily
interrupted at the point where the layers
switch.
There is no sound.
, Check that all the connecting cables are
securely connected.
, Check whether the connecting cables are
damaged.
, Check the connection to your AV amplifier
selector on your AV amplifier (receiver) so
that the audio signals of the player are
output from your AV amplifier (receiver).
, The player is in scan mode.
, If the audio signal does not come through
the DIGITAL OUT (OPTICAL/
COAXIAL)/HDMI OUT jack, check the
audio settings (page 44).
No picture appears when the video output
resolution selected in “Output Video
Format” is incorrect.
, Press x on the player for more than 10
seconds to reset the video output resolution
to the lowest resolution.
The picture does not fill the screen, even
though the aspect ratio is set in “DVD
Aspect Ratio” under “Video Settings.”
, The aspect ratio of the disc is fixed on your
The sound is not output correctly.
, Check the “Audio Output Priority” setting
The sound volume is low.
, The sound volume is low on some BDs or
DVDs.
, Try setting “Audio DRC” to “TV Mode” in
, Set “Audio ATT” to “Off” in the “Audio
Video signals are not output from the
jacks, other than from the HDMI OUT jack,
when connecting the HDMI OUT jack and
other video output jacks at the same time.
, Set “Output Video Format” to “Component
Video” in the “Video Settings” setup
The HD Audio (Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution Audio,
and DTS-HD Master Audio) is not output
by bitstream.
, Set “BD Audio Setting” to “Direct” in the
“Audio Settings” setup (page 45).
, Check that the connected AV amplifier
(receiver) is compatible with each HD
Audio format.
The dark area of the picture is too dark/the
bright area is too bright or unnatural.
, Set “Picture Quality Mode” to “Standard”
(default) (see “Adjusting pictures and
The picture is not output correctly.
, Check the “Output Video Format” settings
,continued
55
Download from Www.Somanuals.com. All Manuals Search And Download.
, If the HDMI indicator does not appear in
the front panel display, check the HDMI
The interactive audio is not output.
, Set “BD Audio Setting” to “Mix” in the
, Make sure that the connected component is
compatible with the “Control for HDMI”
function. For details, refer to the operating
instructions supplied with the component.
, Check the connected component’s setting
for the “Control for HDMI” function. For
details, refer to the operating instructions
supplied with the component.
HDMI
There is no picture or no sound when
connected to the HDMI OUT jack.
, Try the following: 1Turn the player off
and on again. 2Turn the connected
equipment off and on again. 3Disconnect
and then reconnect the HDMI cable.
, If you change the HDMI connection, turn
the player off and on again.
, If power failure occurs, set “Control for
HDMI” to “Off,” then set “Control for
HDMI” to “On” (page 50).
, For details on the “Control for HDMI”
function, see “About the BRAVIA Sync
There is no picture or picture noise
appears when connected to the HDMI OUT
jack.
, The HDMI OUT jack is connected to a DVI
device that does not support copyright
protection technology.
, If you connect the player to a TV through an
AV amplifier (receiver) that is not
, If the HDMI OUT jack is used for video
output, changing the video output
resolution may solve the problem
compatible with the “Control for HDMI”
function, you may be unable to control the
TV from the player.
No sound is output from the HDMI OUT
jack.
, The HDMI OUT jack is connected to a DVI
device (DVI jacks do not accept audio
signals).
External memory (local
storage)
The external memory is not recognised.
, Try the following: 1Turn the player off.
2Align the V mark of the EXT slot with
the V mark on the external memory, and
3Turn the player on. 4Check that the
EXT indicator lights up in the front panel
display.
The sound is not output correctly when
connected to the HDMI OUT jack.
, The device connected to the HDMI OUT
jack does not support the audio format of
the player. Check the audio settings
The display language on the screen
switches automatically when connected to
the HDMI OUT jack.
, When “Control for HDMI” is set to “On”
(page 50), the display language on the
screen automatically switches according to
the language setting of the connected TV (if
you change the setting on your TV, etc.).
Bonus contents or other data that are
contained in a BD-ROM cannot be played.
, Try the following: 1Remove the disc.
2Turn the player off. 3Remove and re-
4Turn the player on. 5Check that the
EXT indicator lights up in the front panel
display. 6Insert the BD-ROM with
BonusView/BD-Live.
The “Control for HDMI” function does not
work (BRAVIA Sync).
, Check that the mains lead of the connected
component is securely connected.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
A message indicating that the local
storage does not have enough space
appears on the screen.
, Delete unnecessary data in the external
memory (page 33).
The disc tray does not open and
“LOCKED” or “TLK ON” appears in the
front panel display.
, When “LOCKED” appears, the player is
locked. To cancel the Child Lock, hold
down X on the player until “UNLOCK”
, When “TLK ON” appears, contact your
Sony dealer or local authorized Sony
service facility.
Operation
The remote does not function.
, The batteries in the remote are weak
, The distance between the remote and the
player is too far.
The disc tray does not open and you
cannot remove the disc even after you
press A.
, Try the following: 1Turn the player off,
and disconnect the mains lead.
, The remote is not pointed at the remote
sensor on the player.
2Reconnect the mains lead while pressing
down A on the player. 3Keep pressing
down A on the player until the tray opens.
4Remove the disc. 5When “WAIT”
appears in the front panel display, hold
down [/1 on the player for more than 10
seconds until the player turns on again.
The file name is not correctly displayed.
, The player can only display ISO 8859-1-
compliant character formats. Other
character formats may be displayed
differently.
, Depending on the writing software used,
the input characters may be displayed
differently.
The player does not respond to any button.
, Moisture has condensed inside the player
, Hold down [/1 on the player for more than
10 seconds until the indicators in the front
panel display turn off.
The disc does not start playing from the
beginning.
If the player still does not respond to any
button, disconnect then reconnect the mains
lead.
Some functions such as Stop or Search
cannot be performed.
, Depending on the disc, you may not be able
to do some of the operations above. Refer to
the operating manual supplied with the disc.
The language for the soundtrack/subtitle
or angles cannot be changed.
, Try using the BD’s or DVD’s menu instead
of the direct selection button on the remote
, Multi-lingual tracks/subtitles or multi-
angles are not recorded on the BD or DVD
being played.
, The BD or DVD prohibits the changing of
the language for the sound track/subtitle or
angles.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-Diagnosis Function
When the self-diagnosis function is activated
to prevent the player from malfunctioning, an
error code appears in the front panel display,
or just
appears without any messages on
the entire screen.
In these cases, check the following.
When an error code appears in the front
panel display
Error code Corrective action
Exxxx
SYS ERR
Contact your nearest Sony
dealer or local authorised Sony
service facility and give the
error code.
FAN ERR
• Check that the ventilation
holes on the rear of the player
are not blocked.
• Place the player in a location
with adequate ventilation to
prevent heat build-up in the
player.
When just
appears without any
messages on the entire screen
Contact your nearest Sony dealer or local
authorised Sony service facility.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Discs
Icon used in
this manual
Type
Disc Logo
Characteristics
BD-ROMs and BD-REs/BD-Rs in
BDMV and BDAV mode, including
8 cm discs (single layer) and DL discs
Blu-ray Disc
BD
Discs such as movies that can be
purchased or rented
DVD VIDEO
DVD
DVD+RWs/DVD+Rs in +VR mode or
DVD-RWs/DVD-Rs in video and VR
mode, including 8 cm discs (single
layer) and DVD+R DL/DVD-R DL
discs
DVD
DVD
DVD+RWs/DVD+Rs/DVD-RWs/
DVD-Rs containing JPEG* image files
DATA DVD
DATA DVD
Music CDs or CD-Rs/CD-RWs in music
CD format
CD
CD
CD-Rs/CD-RWs containing JPEG*
image files
DATA CD
—
DATA CD
* JPEG format conforming to UDF (Universal Disk
Format).
Notes about BD-ROM compatibility
Since the Blu-ray Disc specifications are new
and evolving, some discs may not be playable
depending on the disc type and the version.
The audio output differs depending on the
source, connected output jack, and selected
,continued
59
Download from Www.Somanuals.com. All Manuals Search And Download.
b
Discs that cannot be played
• BDs with cartridge
• Notes about BD-REs/BD-Rs, DVD+RWs/
DVD+Rs, DVD-RWs/DVD-Rs, or CD-Rs/
CD-RWs
Some BD-REs/BD-Rs, DVD+RWs/DVD+Rs,
DVD-RWs/DVD-Rs, or CD-Rs/CD-RWs cannot
be played on this player due to the recording
quality or physical condition of the disc, or the
characteristics of the recording device and
authoring software.
A CD or DVD disc will not play if it has not been
correctly finalised. For more information, refer to
the operating instructions supplied with the
recording device. Note that some playback
functions may not work with some DVD+RWs/
DVD+Rs, even if they have been correctly
finalised. In this case, view the disc using normal
playback.
• DVD-RAMs
• HD DVDs
• DVD Audio discs
• PHOTO CDs
• Data part of CD-Extras
• VCDs/Super VCDs
• HD layer on Super Audio CDs
• BD-ROMs/DVD VIDEOs with a different
Note on playback operations of BDs/DVDs
Some playback operations of BDs/DVDs
may be intentionally set by software
producers. Since this player plays BDs/
DVDs according to the disc contents the
software producers designed, some playback
features may not be available. Refer to the
instructions supplied with the BDs/DVDs.
• Music discs encoded with copyright
protection technologies
This product is designed to play back discs that
conform to the Compact Disc (CD) standard.
Various music discs encoded with copyright
protection technologies are being marketed by
some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
Region code (BD-ROM/DVD VIDEO only)
Your player has a region code printed on the
rear of the unit and will only play BD-ROMs/
DVD VIDEOs (playback only) labelled with
identical region codes. This system is used to
protect copyrights.
DVD VIDEOs labelled
on this player.
Depending on the BD-ROM/DVD VIDEO,
no region code may be indicated even though
playing the BD-ROM/DVD VIDEO is
prohibited by area restrictions.
• Note on DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side.
However, since the audio material side does not
conform to the Compact Disc (CD) standard,
playback on this product is not guaranteed.
• Note about double-layer DVDs
The playback pictures and sound may be
momentarily interrupted when the layers switch.
• Note about 8 cm BD-REs/8 cm BD-Rs
Some 8 cm BD-REs/8 cm BD-Rs cannot be
played on this player.
will also play
ALL
Region code
• Note about BD-REs/BD-Rs
This player supports Ver. 2.1 BD-RE and Ver. 1.1
and 1.2 BD-R including organic pigment type
BD-R (LTH type).
• Note about DTS 5.1 MUSIC DISCs
This player can play DTS 5.1 MUSIC DISCs.
Audio signals are output in the formats specified
63.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
About playback of discs recorded in
AVCHD format
This player can play AVCHD format discs.
TM
What is the AVCHD format?
The AVCHD format is a high-definition digital
video camera format used to record SD (standard
definition) or HD (high definition) signals of either
*1
the 1080i specification or the 720p
*2
specification on DVDs, using efficient data
compression coding technology. The MPEG-4
AVC/H.264 format is adopted to compress video
data, and the Dolby Digital or Linear PCM system
is used to compress audio data. The MPEG-4 AVC/
H.264 format is capable of compressing images at
higher efficiency than that of the conventional
image compressing format. The MPEG-4 AVC/
H.264 format enables a high definition (HD) video
signal shot on a digital video camera recorder to be
recorded on DVD discs, in the same way as it would
be for a standard definition (SD) television signal.
*1
A high-definition specification which utilizes
1080 effective scanning lines and the interlace
system.
A high-definition specification which utilizes
*2
720 effective scanning lines and the progressive
system.
b
• Some AVCHD format discs may not play,
depending on the recording condition.
• The AVCHD format disc will not play if it has not
been correctly finalised.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Output Resolution
Output resolution differs depending on the “Output Video Format” setting in the “Video
When “Output Video Format” is set to
“HDMI”
When “Output Video Format” is set to
“Component Video”
Resolution
setting
LINE OUT
LINE OUT
VIDEO/
S VIDEO
jack
COMPONENT HDMI OUT
VIDEO/
S VIDEO
jack
COMPONENT HDMI OUT
VIDEO jack
jack
VIDEO jack
jack
480i/576i
480p/576p
720p
480i/576i
480i/576i
480i/576i
480i/576i
no picture
480i/576i
480i/576i
480i/576i
480i/576i
no picture
480i/576i
480p/576p
720p
480i/576i
480i/576i
480i/576i
480i/576i
480i/576i
480i/576i
480p/576p 480p/576p
720p*
720p*
1080i
1080i
1080i*
1080i*
1080p
1080p
unselectable unselectable unselectable
* Protected contents on DVDs are output at 480p/
576p resolution. Protected contents on BDs are
output at 576p resolution.
When “Output Video Format” is set to
“Video or S Video”
480i/576i video signals are output from the
LINE OUT VIDEO/S VIDEO or
COMPONENT VIDEO jack, and 480p/576p
video signals are output from the HDMI OUT
jack.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Output Signals
The audio output differs as follows, depending on the source, output jack, and the selected
settings.
Digital
Analogue
Jacks/
settings*1
DIGITAL OUT (OPTICAL/
COAXIAL) jacks*2
HDMI OUT jack*2
LINE OUT
(R-AUDIO-L)
jacks
Disc/source
Auto*3
2ch PCM*3 Bitstream*4
PCM
BD
LPCM 2ch
LPCM 5.1ch
LPCM 2ch
LPCM 2ch
LPCM 2ch
LPCM 2ch
LPCM 2ch
LPCM 2ch
LPCM 2ch
LPCM 2ch
2ch
2ch
2ch
LPCM 5.1ch LPCM 2ch
LPCM 7.1ch LPCM 2ch
LPCM 7.1ch
Dolby Digital/
LPCM 2ch*6
Dolby Digital
LPCM 5.1ch*5 LPCM 2ch
LPCM 7.1ch*5 LPCM 2ch
LPCM 2ch
LPCM 2ch
LPCM 2ch
LPCM 2ch
2ch
2ch
2ch
2ch
Dolby Digital
Plus
Dolby Digital/
LPCM 2ch*6
Dolby Digital/
LPCM 2ch*6
Dolby TrueHD LPCM 7.1ch*5 LPCM 2ch
DTS/
DTS
LPCM 5.1ch*5 LPCM 2ch
LPCM 2ch*6
DTS-HD High
Resolution
Audio
DTS-HD Master LPCM 5.1ch*5
Audio
LPCM 5.1ch*5
LPCM 2ch
DTS/
LPCM 2ch
LPCM 2ch
2ch
2ch
(DTS core)
LPCM 2ch*6
DTS/
LPCM 2ch
LPCM 2ch
(DTS core)
LPCM 2ch*6
DVD
CD
LPCM
LPCM 2ch
LPCM 2ch
Dolby Digital
DTS
LPCM 2ch
LPCM 2ch
LPCM 2ch
LPCM 2ch
LPCM 2ch
2ch
2ch
2ch
2ch
2ch
Dolby Digital
DTS
Dolby Digital LPCM 2ch
DTS
LPCM 2ch
LPCM 2ch
LPCM 2ch
MPEG
LPCM 2ch
LPCM
LPCM 2ch
LPCM 2ch
LPCM
DTS
LPCM 2ch
DTS
LPCM 2ch
2ch
DTS 5.1 MUSIC DISC
*1
*2
*3
When “Audio Output Priority” is set to “Stereo
Analogue,” LPCM 2ch signals are output from
each jack.
When “Audio Output Priority” is set to “HDMI”
or “Coaxial/Optical,” LPCM 2ch signals are
output from jacks other than the selected jack.
Auto: when “Audio (HDMI)” is set to “Auto” in
2ch PCM: when “Audio (HDMI)” is set to “2ch
Bitstream: when “Dolby Digital” is set to
“Dolby Digital” or “DTS” is set to “DTS” in the
When “BD Audio Setting” is set to “Direct,”
audio recorded by the source is output by
bitstream. However, this audio may be output as
follows depending on the audio formats
supported by the AV amplifier (receiver).
– When the AV amplifier (receiver) does not
support HD Audio (Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution Audio and
DTS-HD Master Audio) but supports Multi-ch
LPCM, up to LPCM 7.1ch is output.
– When the AV amplifier (receiver) does not
support HD Audio or Multi-ch LPCM but
supports Dolby Digital/DTS, a Dolby Digital
or DTS bitstream is output.
– When the AV amplifier (receiver) does not
support HD Audio, Multi-ch LPCM or Dolby
Digital/DTS, LPCM 2ch is output.
The 2-channel or less-channel primary/
secondary audio signals are output as LPCM 2ch
signals.
*6
*4
*5
b
When outputting 480i/576i or 480p/576p video
signals from the HDMI OUT jack, Dolby TrueHD
and DTS-HD Master Audio are output as LPCM,
Dolby Digital, or DTS bitstream signals even if
“BD Audio Setting” is set to “Direct” in the “Audio
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
Laser: Semiconductor laser
Inputs and outputs
(Jack name:
Jack type/Output level/Load impedance)
LINE OUT R-AUDIO-L:
Phono jack/2 Vrms/10 kilohms
DIGITAL OUT (OPTICAL):
Optical output jack/–18 dBm
(wave length 660 nm)
DIGITAL OUT (COAXIAL):
Phono jack/0.5 Vp-p/75 ohms
HDMI OUT:
HDMI 19-pin standard connector
COMPONENT VIDEO OUT
(Y, PB/CB, PR/CR):
Phono jack/Y: 1.0 Vp-p/
PB/CB, PR/CR: 0.7 Vp-p/75 ohms
LINE OUT VIDEO:
Phono jack/1.0 Vp-p/75 ohms
LINE OUT S VIDEO:
4-pin mini DIN/
Y: 1.0 Vp-p, C: 0.3 Vp-p/75 ohms
LAN (100):
100BASE-TX Terminal
EXT:
External memory slot (For connecting the
external memory)
DC output: 5 V 500 mA Max
General
Power requirements:
220–240 V AC, 50/60 Hz
Power consumption:
26 W
Dimensions (approx.):
430 mm × 220 mm × 60 mm
(width/depth/height) incl. projecting parts
Mass (approx.):
2.9 kg
Operating temperature:
5 ºC to 35 ºC
Operating humidity:
25 % to 80 %
Supplied accessories
Specifications and design are subject to
change without notice.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Number, Language (BD Language Code/DVD Language Code)
not specified
Parental Control/Area Code
Number, Area (Code)
2044, Argentina (ar)
2047, Australia (au)
2046, Austria (at)
2057, Belgium (be)
2070, Brazil (br)
2200, Greece (gr)
2219, Hong Kong (hk)
2248, India (in)
2379, Norway (no)
2427, Pakistan (pk)
2424, Philippines (ph)
2428, Poland (pl)
2238, Indonesia (id)
2239, Ireland (ie)
2436, Portugal (pt)
2489, Russia (ru)
2501, Singapore (sg)
2149, Spain (es)
2499, Sweden (se)
2086, Switzerland (ch)
2543, Taiwan (tw)
2528, Thailand (th)
2184, United Kingdom (gb)
2079, Canada (ca)
2090, Chile (cl)
2254, Italy (it)
2276, Japan (jp)
2092, China (cn)
2093, Colombia (co)
2115, Denmark (dk)
2165, Finland (fi)
2174, France (fr)
2109, Germany (de)
2304, Korea (kr)
2333, Luxembourg (lu)
2363, Malaysia (my)
2362, Mexico (mx)
2376, Netherlands (nl)
2390, New Zealand (nz)
65
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Automatic Update
The Software contains a functionality by which it is updated
automatically when the Product is connected to a server
belonging to Sony or to a third party designated by Sony. When
you specify your intention not to use this automatic update
functionality, or when the setting asking whether you wish to
update automatically is activated and you decline to execute
updates, it is assumed that you agree that the security
functionality improvements, error corrections, other functional
updates or any other changes offered by Sony through such
updates would not be made to the Software and that your current
and further use of the Software may be affected thereby.
Terms and Conditions of
Use and End User
License Agreement
The Sony Blu-ray Disc player (“Product”) and associated
software (“Software”) are provided and maintained by Sony
Corporation and its affiliates (“Sony”). Sony also provides and
maintains associated service (the “Service”), including any
subsite accessible through the Service’s Internet homepage (the
“Site”). The Software includes software embedded in the
Product; stored on any media, bundled with the Product or
otherwise provided by Sony; downloaded from the Site or
otherwise made accessible or provided by Sony; any such media
and any printed or “on-line” or electronic documentation
associated with the Product and all updates and upgrades thereto.
When the automatic update functionality described in the
previous paragraph is activated, it is assumed that you agree (a)
that the Software will be automatically updated as necessary to
improve security functionality, to correct errors, to improve
update functionality, or for other purposes, and (b) that this
updating of the Software may be accompanied by the
augmenting, modifying, or removing of functionality of the
Software.
4. Additional Terms Governing Product Software
You may use the Software solely in conjunction with the Product
that accompanied the Software. The Software is licensed, not
sold. In addition to the terms set forth in other portions of this
Agreement, the Software is subject to the following:
WHEN YOU ACCESS, BROWSE, OR USE THE SERVICE,
PRODUCT, SOFTWARE, AND/OR SITE, YOU ACCEPT,
WITHOUT LIMITATION OR QUALIFICATION, THE
TERMS AND CONDITIONS SET FORTH HEREIN, SONY’S
PRIVACY POLICY POSTED ON THE SITE, AND ANY
ADDITIONAL TERMS AND CONDITIONS OF USE SET
FORTH IN ANY PORTION OF THE SERVICE AND SITE
(COLLECTIVELY THE “AGREEMENT”). IF YOU DO NOT
AGREE WITH THE TERMS AND CONDITIONS OF THIS
AGREEMENT, SONY DOES NOT GRANT THE LIMITED
RIGHTS HEREIN, AND PLEASE DO NOT USE THE
SERVICE, PRODUCT, SOFTWARE, AND/OR SITE.
Use of Software. You may use the Software in conjunction with
the Product for personal use.
Limitation on Reverse Engineering, Decompilation and
Disassembly. You may not modify, reverse engineer,
decompile, or disassemble the Software in whole or in part.
Separation of Components. The Software is licensed as a single
product. Its component parts may not be separated for use on
more than one device unless expressly authorized by Sony.
Data Files. The Software may create data files automatically for
use with the Software. Any such data files will be deemed as part
of the Software.
1. Ownership
The Software and all materials on the Service and/or Site,
including but not limited to images, software and text (the
“Content”) are protected by copyright under copyright law and
international conventions. You cannot use the Software, Service,
Product, Content, and Site except as specified herein. There may
be proprietary logos, service marks, and trademarks found on
this Service or Site. By making them available on the Service
and/or Site, Sony is not granting you any license to utilize those
proprietary logos, service marks, or trademarks. Any
unauthorized use of the Service, Site, Content or Software may
violate copyright laws, trademark laws, the laws of privacy and
publicity, and civil and criminal statutes. All title and copyright
in and to the Software or materials on the Service/Site and any
copies of the Software, are owned by Sony, its licensors, or
suppliers. All rights not specifically granted under this
Agreement are reserved by Sony, its licensors, and suppliers.
Rental. You may not rent or lease the Software.
Software Transfer. You may permanently transfer all of your
rights under this Agreement only as part of a sale or transfer of
Software accompanying the sale or transfer of your Product,
provided you retain no copies, transfer all of the Software
(including all copies, component parts, the media and printed
materials, all versions and any upgrades of the Software and this
Agreement), and the recipient agrees to the terms of this
Agreement.
Dependent Software. The software, network services or other
products other than Software upon which the Software’s
performance depends on might be interrupted or discontinued at
the discretion of the suppliers (software suppliers, service
providers or Sony).
2. Your Rights & Limited License
High Risk Activities. The Software is not fault-tolerant and is
not designed, manufactured or intended for use or resale as on-
line control equipment in hazardous environments requiring fail-
safe performance, such as in the operation of nuclear facilities,
aircraft navigation or communication systems, air traffic control,
direct life support machines, or weapons systems, in which the
failure of the Software could lead to death, personal injury, or
severe physical or environmental damage (“High Risk
The Service, Site, Software, Content, and Product are only for
your personal use. You are responsible for all your activities
hereunder, including all legal liability incurred from your use of
the Service or others who use the Service via your Product. You
may use the Service, Site, Software, Content and Product for
lawful purposes only. You may not distribute, exchange,
modify, sell, or transmit anything you may copy from the
Service or Site, including but not limited to any text, images,
audio, and video, for any business, commercial, or public
purpose. As long as you comply with the terms of this
Agreement, Sony grants you a non-exclusive, non-transferable,
limited right to enter, display, and use the Service, Site, and
Software as set forth in this Agreement. You agree not to
interrupt/disrupt or attempt to interrupt/disrupt the operation of
this Service, Site or Software in any way.
Activities”). Sony and its suppliers specifically disclaim any
express or implied warranty of fitness for High Risk Activities.
GNU General Public, Lesser General Public, & Other Licenses.
Notwithstanding terms in this Agreement, certain portions of the
Software are governed by the GNU Lesser General Public
License, Version 2.1 (LGPL), GNU General Public License
Version 2 (GPL), and other open source code licenses (“Open
Source Licenses”), copies of which are attached hereto and
incorporated herein. For such portions of the Software, to the
extent there is any conflict between this Agreement and the
Open Source Licenses, the Open Source Licenses shall govern
as applicable.
Certain Source Code Availability. Sony is making available the
source code of certain portions of the SOFTWARE per the GPL/
LGPL LICENSES. Please see http://www.sony.com/linux
for access to and instructions on obtaining such source code.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Changes to Service
10. DISCLAIMER OF WARRANTIES AND DAMAGES;
Sony reserves the right to discontinue one, some, or all of the
features of the Service you receive at any time at its discretion.
Sony may, at its discretion and from time to time change, add or
remove features and functionality, upgrade or modify the
Service, Site and/or Software without notice. You may, at
Sony’s discretion, receive messages regarding these changes and
new features/functionality. Any new text, content, file, data,
product, services, information, software, software tool or other
feature provided by Sony (through the network or by CD-ROM
or other means)(including, but not limited to, any update to
Software provided to you automatically pursuant to Section 3 of
this Agreement) will be subject to this Agreement; provided that,
if separate terms and conditions applicable to such feature are
provided to you, such terms and conditions shall apply to such
feature in priority to this Agreement.
LIMITATION OF LIABILITY
YOU UNDERSTAND THAT USAGE OF THE PRODUCT
AND SERVICE REQUIRES INTERNET SERVICE
PROVIDED BY YOU, FOR WHICH YOU ARE SOLELY
RESPONSIBLE. OPERATION OF THE PRODUCT AND/OR
SERVICE MAY BE LIMITED OR RESTRICTED
DEPENDING UPON THE CAPABILITIES OR TECHNICAL
LIMITATIONS OF YOUR INTERNET SERVICE.
YOUR USE OF THE SOFTWARE, SERVICE, PRODUCT,
CONTENT AND/OR SITE IS AT YOUR OWN RISK. THE
SOFTWARE, SERVICE, CONTENT AND SITE ARE
PROVIDED “AS IS” AND, TO THE FULLEST EXTENT
PERMISSIBLE BY LAW, SONY MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND
WHATSOEVER (1) FOR THE ACCURACY,
6. Confidentiality
You shall maintain the confidentiality of any information with
regard to the Product and Documentation that is provided under
this Agreement and is not publicly known. You agree not to
disclose such information to any third party without the prior
written consent.
MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT ASSOCIATED
WITH THE SERVICE, SITE, AND/OR SOFTWARE; (2)
THAT THE SERVER(S) THAT MAKES THE SERVICE,
SOFTWARE, AND/OR SITE AVAILABLE ARE FREE OF
VIRUSES OR OTHER COMPONENTS THAT MAY
INFECT, HARM, OR CAUSE DAMAGE TO YOUR
COMPUTER, TELEVISION, OTHER EQUIPMENT, OR
ANY OTHER PROPERTY. FURTHERMORE, SONY DOES
NOT WARRANT OR MAKE ANY REPRESENTATIONS
REGARDING THE USE OR THE RESULTS OF THE USE OF
THE SOFTWARE, SERVICE, AND/OR SITE IN TERMS OF
ITS CORRECTNESS, ACCURACY, RELIABILITY, OR
OTHERWISE. NO ORAL OR WRITTEN INFORMATION
OR ADVICE GIVEN BY SONY OR A SONY AUTHORIZED
REPRESENTATIVE SHALL CREATE A WARRANTY OR
IN ANY WAY INCREASE THE SCOPE OF THIS
7. Export Control
You agree not to export from anywhere the Software or thereof
provided to you except in compliance with, and with all licences
and approvals required under, applicable export laws, rules and
regulations.
8. Sony’s Right to Terminate or Modify Terms or
Conditions of this Agreement
Sony may add to, change, or remove any part, term, or condition
of this Agreement at any time, without prior notice. Any changes
to this Agreement or any terms posted on the Service and/or Site
apply as soon as they are posted. By continuing to use the
Service, Product, Software and/or Site after any changes are
posted, you are indicating your acceptance of those changes.
SONY MAY ADD, CHANGE, DISCONTINUE, REMOVE,
OR SUSPEND ANY OTHER CONTENT POSTED ON THE
SERVICE AND/OR SITE, INCLUDING FEATURES AND
SPECIFICATIONS OF PRODUCTS DESCRIBED OR
DEPICTED ON THE SERVICE AND/OR SITE,
WARRANTY. SHOULD THE SOFTWARE, SERVICE, AND/
OR SITE PROVE DEFECTIVE YOU (AND NOT SONY OR
A SONY AUTHORIZED REPRESENTATIVE) ASSUME
THE ENTIRE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
UNDER NO CIRCUMSTANCES, INCLUDING BUT NOT
LIMITED TO SONY’S NEGLIGENCE OR ISSUES
TEMPORARILY OR PERMANENTLY, AT ANY TIME,
WITHOUT NOTICE AND WITHOUT LIABILITY.
WITHOUT PREJUDICE TO ANY OTHER RIGHTS, SONY
MAY SUSPEND OR TERMINATE THIS AGREEMENT
IMMEDIATELY UPON NOTICE IF YOU FAIL TO
COMPLY WITH THE TERMS AND CONDITIONS OF THIS
AGREEMENT. Upon termination, you shall destroy the
Software within fourteen (14) days after the date of such
termination, and upon Sony’s request, provide Sony with the
certification of such destruction. Sony may take any legal and
technical remedies to prevent the violation of and/or to enforce
this Agreement, including without limitation, immediate
termination of your access to the Service if we believe in our
discretion you are violating this Agreement.
RELATED TO THIRD PARTY CONTENT PROVIDERS,
SHALL SONY BE LIABLE FOR ANY CONSEQUENTIAL,
DIRECT, INCIDENTAL, INDIRECT, PUNITIVE, OR
SPECIAL DAMAGES RELATED TO (A) THE USE OF, (B)
THE INABILITY TO USE, OR (C) ERRORS OR OMISSIONS
IN THE SOFTWARE, SERVICE, PRODUCT, AND/OR SITE,
EVEN IF SONY OR AN AUTHORIZED REPRESENTATIVE
THEREOF HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF CONSEQUENTIAL OR
INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU. IN NO
EVENT SHALL SONY’S TOTAL LIABILITY TO YOU FOR
ALL DAMAGES, LOSSES, AND CAUSES OF ACTION
(WHETHER IN CONTRACT OR TORT, INCLUDING, BUT
NOT LIMITED TO, NEGLIGENCE OR OTHERWISE)
EXCEED THE AMOUNT PAID FOR THE PRODUCT.
9. Indemnification
You agree to indemnify, defend, and hold Sony and all of its
agents, directors, employees, information providers, licensors
and licensees, affiliates, content providers, officers, and parent
(collectively, “Indemnified Parties”), harmless from and against
any and all liability and costs (including, without limitation,
attorneys’ fees and costs), incurred by the Indemnified Parties in
connection with any claim arising out of (i) any breach or alleged
breach by you of this Agreement in any manner, (ii) any
information you submit to Sony hereunder, (iii) any breach or
alleged breach by you of a third party’s rights or (iv) any damage
caused by or alleged to have been caused by you to the Service.
You will cooperate as fully as reasonably required in
Indemnified Party(s) defense of any claim. Sony and/or
Indemnified Parties reserve the right, at its own expense, to
assume the exclusive defense and control of any matter
otherwise subject to indemnification by you and you shall not in
any event settle any matter without the written consent of Sony
and/or Indemnified Parties.
SOME STATES, TERRITORIES AND COUNTRIES DO NOT
ALLOW CERTAIN WARRANTY EXCLUSIONS, SO TO
THAT EXTENT THE ABOVE DISCLAIMER AND
LIMITATION OF LIABILITY MAY NOT APPLY TO YOU.
THE TERMS OF THIS DISCLAIMER DO NOT AFFECT OR
PREJUDICE YOUR STATUTORY RIGHTS AS
CONSUMER, NEITHER DO THEY LIMIT OR EXCLUDE
ANY LIABILITY FOR DEATH OR PERSONAL INJURY
CAUSED BY THE NEGLIGENCE OF SONY OR ANY
OTHER LIABILITY IF AND TO THE EXTENT THAT IT
CANNOT BE LIMITED OR EXCLUDED BY APPLICABLE
LAW .
,continued
67
Download from Www.Somanuals.com. All Manuals Search And Download.
11. General Provisions
BD-J application
This Agreement, the limited warranty accompanying the
Product, plus any additional terms posted on the Service or Site,
together constitute the entire agreement between Sony and you
with respect to your use of the Product, Service, Site, Content,
and Software. Any notice by Sony hereunder may be made by
letter, email, or posting on the Service or Site. Any cause of
action you may have with respect to your use of this Site must be
commenced within one (1) year after the claim or cause of action
arises. If for any reason a court of competent jurisdiction finds
any provision of this Agreement, or portion thereof, to be
unenforceable, that provision shall be enforced to the maximum
extent permissible so as to affect the intent of this Agreement,
and the remaining terms and conditions of the Agreement shall
continue in full force and effect. This Agreement shall be
governed by and construed in accordance with the laws of Japan.
The BD-ROM format supports Java for
interactive functions.
“BD-J” offers content providers almost
unlimited functionality when creating
interactive BD-ROM titles.
BD-R (Blu-ray Disc Recordable) is a
recordable, write-once Blu-ray Disc,
available in the same capacities as the BD
below. Since contents can be recorded and
cannot be overwritten, a BD-R can be used to
archive valuable data or storing and
distributing video material.
Glossary
BD-RE (page 59)
AACS
BD-RE (Blu-ray Disc Rewritable) is a
recordable and rewritable Blu-ray Disc,
available in the same capacities as the BD
below. The re-recordable feature makes
extensive editing and time-shifting
applications possible.
“Advanced Access Content System” is a
specification for managing digital
entertainment contents stored on the next
generation of prerecorded and recorded
optical media. The specification enables
consumers to enjoy digital entertainment
content, including high-definition content.
BD-ROM (page 59)
BD-ROMs (Blu-ray Disc Read-Only
Memory) are commercially produced discs
and are available in the same capacities as the
BD below. Other than conventional movie
and video contents, these discs have
enhanced features such as interactive content,
menu operations using pop-up menus,
selection of subtitle display, and slideshow.
Although a BD-ROM may contain any form
of data, most BD-ROM discs will contain
movies in High Definition format, for
playback on Blu-ray Disc/DVD players.
AVCHD (page 61)
The AVCHD format is a high definition
digital video camera format used to record
SD (standard definition) or HD (high
definition) signals of either the 1080i
*1
*2
specification or the 720p specification on
DVDs, using efficient data compression
coding technology. The MPEG-4 AVC/
H.264 format is adopted to compress video
data, and the Dolby Digital or Linear PCM is
used to compress audio data. The MPEG-4
AVC/H.264 format is capable of
Blu-ray Disc (BD) (page 59)
compressing images at higher efficiency than
that of the conventional image compression
format. The MPEG-4 AVC/H.264 format
enables a high definition (HD) video signal
shot on a digital video camera recorder to be
recorded on DVDs in the same way as for a
standard definition (SD) television signal.
A disc format developed for recording/
playing high-definition (HD) video (for
HDTV, etc.), and for storing large amounts of
data. A single layer Blu-ray Disc holds up to
25 GB, and a dual-layer Blu-ray Disc holds
up to 50 GB of data.
*1
A high definition specification that utilises 1080
effective scanning lines and the interlace format.
A high definition specification that utilises 720
effective scanning lines and the progressive
format.
Dolby Digital Plus (page 63)
*2
Developed as an extension to Dolby Digital,
the audio coding technology supports 7.1
multi-channel surround sound.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Dolby TrueHD (page 63)
Pop-up menu (page 32)
Dolby TrueHD is a lossless coding
An enhanced menu operation available on
BD-ROMs. The pop-up menu appears when
POP UP/MENU is pressed during playback,
and can be operated while playback is in
progress.
technology that supports up to 8 channels of
multi-channel surround sound for the next
generation optical discs. The reproduced
sound is true to the original source bit-for-bit.
DTS-HD High Resolution Audio (page 63)
Developed as an extension to DTS Digital
Surround format. It supports a maximum
sampling frequency of 96 kHz, and 7.1 multi-
channel surround.
x.v.Colour (page 44)
x.v.Colour is a familiar term for the xvYCC
standard proposed by Sony.
xvYCC is an international standard for
Colour space in video.
DTS-HD High Resolution Audio has a
maximum transmission rate of 6 Mbps, with
lossy compression (Lossy).
This standard can express a wider colour
range than the currently used broadcast
standard.
DTS-HD Master Audio (page 63)
DTS-HD Master Audio has a maximum
transmission rate of 24.5 Mbps, and uses
lossless compression (Lossless), and DTS-
HD Master Audio corresponds to a maximum
sampling frequency of 192 kHz, and
maximum of 7.1ch.
24p True Cinema (page 43)
Movies shot with a film camera consist of 24
frames per second.
Since conventional televisions (both CRT
and flat panels) display frames either at 1/60
or 1/50 second intervals, the 24 frames do not
appear at an even pace.
When connected to a TV with 24p
capabilities, the player displays each frame at
1/24 second intervals — the same interval
originally shot with the film camera, thus
faithfully reproducing the original cinema
image.
HDMI (High-Definition Multimedia
Interface) (page 15)
HDMI is an interface that supports both video
and audio on a single digital connection. The
HDMI connection carries standard- to high-
definition video signals and multi-channel
audio signals to AV components such as
HDMI equipped TVs, in digital form without
degradation.
The HDMI specification supports HDCP
(High-bandwidth Digital Contents
Protection), a copy protection technology for
digital entertainment contents for HDMI.
LTH (Low to High) (page 60)
LTH is a recording system that supports
organic pigment type BD-R.
PhotoTV HD (page 38)
“PhotoTV HD” allows for a highly-detailed
pictures, and photo-like expression of subtle
textures and colours. By connecting Sony
“PhotoTV HD” compatible devices using an
HDMI cable, whole new world of photos can
be enjoyed in breathtaking Full HD quality.
For instance, the delicate texture of the
human skin, flowers, sand and waves can
now be displayed on a large screen in
beautiful photo-like quality.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
D
P
Index
“Dimmer” 50
Disc information 34
Disc Lock 31
DISPLAY 8
“Photo” 37
“Photo Settings” 49
Playable discs 59
Words in quotations appear
in the on-screen displays.
Numerics
24p True Cinema 69
Q
DVD 59
A
“Quick Start” 50
“A/V Settings” 35
AACS 68
R
E
ANGLE 8
AUDIO 8
Region code 60
“Resetting” 53
Resetting the player 53
Enter characters 52
“Audio Output Priority”
Audio output signals 63
F
S
Front panel display 11
SCENE SEARCH 9
Self-diagnosis function 58
“Setup” 39
B
Batteries 26
H
“BD/DVD Viewing
Settings” 47
Slideshow 37
HOME 9
“Standby Mode” 50
SUBTITLE 8
System Power-Off 16
“System Settings” 50
Bitstream 63
L
Language Follow 16
LTH 69
T
M
C
CD 59
Chapter 34
Colour buttons 9
Connecting
AV amplifier
(receiver) 19
TV 14
Title 34
“Music” 36
TOP MENU 9
Troubleshooting 54
“TV Type” 41
N
“Network Diagnostic” 51
“Network Settings” 51
U
O
V
“OSD” 50
“Video” 30
Video output resolution 62
X
70
Download from Www.Somanuals.com. All Manuals Search And Download.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
|