Sony Blu ray Player 3 452 775 111 User Manual

3-452-775-11(1)

To find out useful hints, tips and information about Sony products and services

please visit: www.sony-europe.com/myproduct

Operating Instructions

Blu-ray Disc / DVD Player

BDP-S350

3-452-775-11(1)

Printed in Malaysia

Download from Www.Somanuals.com. All Manuals Search And Download.

Notice for customers in the

United Kingdom and

Republic of Ireland

A molded plug complying with

BS1363 is fitted to this equipment

for your safety and convenience.

Should the fuse in the plug

supplied need to be replaced, a 5

AMP fuse approved by ASTA or

BSI to BS1362, (i.e., marked with

WARNING

To reduce the risk of fire or electric

shock, do not expose this apparatus

to rain or moisture.

To avoid electrical shock, do not

open the cabinet. Refer servicing to

qualified personnel only.

Disposal of waste

mark) must be used.

batteries (applicable in

the European Union and

other European countries

with separate collection

systems)

This symbol on the battery or on

the packaging indicates that the

battery provided with this product

shall not be treated as household

waste.

By ensuring these batteries are

disposed of correctly, you will help

prevent potentially negative

consequences for the environment

and human health which could

otherwise be caused by

inappropriate wastehandling of the

battery. The recycling of the

materials will help to conserve

natural resources.

If the plug supplied with this

equipment has a detachable fuse

cover, be sure to attach the fuse

cover after you change the fuse.

Never use the plug without the fuse

cover. If you should lose the fuse

cover, please contact your nearest

Sony service station.

Batteries or batteries installed

apparatus shall not be exposed to

excessive heat such as sunshine,

fire or the like.

CAUTION

The use of optical instruments with

this product will increase eye

hazard. As the laser beam used in

this Blu-ray Disc/DVD player is

harmful to eyes, do not attempt to

disassemble the cabinet.

Refer servicing to qualified

personnel only.

Disposal of Old Electrical

& Electronic Equipment

(Applicable in the

European Union and

other European countries

with separate collection

systems)

This symbol on the product or on

its packaging indicates that this

product shall not be treated as

household waste. Instead it shall be

handed over to the applicable

collection point for the recycling of

electrical and electronic

equipment. By ensuring this

product is disposed of correctly,

you will help prevent potential

negative consequences for the

environment and human health,

which could otherwise be caused

by inappropriate waste handling of

this product. The recycling of

materials will help to conserve

natural resources. For more

In case of products that for safety,

performance or data integrity

reasons require a permanent

connection with an incorporated

battery, this battery should be

replaced by qualified service staff

only.

To ensure that the battery will be

treated properly, hand over the

product at end-of-life to the

applicable collection point for the

recycling of electrical and

electronic equipment.

This label is located on the laser

protective housing inside the

enclosure.

For all other batteries, please view

the section on how to remove the

battery from the product safely.

Hand the battery over to the

applicable collection point for the

recycling of waste batteries.

This appliance is classified as a

CLASS 1 LASER product. The

CLASS 1 LASER PRODUCT

MARKING is located on the laser

protective housing inside the

enclosure.

detailed information about

recycling of this product, please

contact your local Civic Office,

your household waste disposal

service or the shop where you

purchased the product.

For more detailed information

about recycling of this product or

battery, please contact your local

Civic Office, your household

waste disposal service or the shop

where you purchased the product.

Download from Www.Somanuals.com. All Manuals Search And Download.

The manufacturer of this product is

Sony Corporation, 1-7-1 Konan

Minato-ku Tokyo, 108-0075

Japan. The Authorized

• Clean the disc with a cleaning

cloth. Wipe the disc from the

centre out.

Precautions

Representative for EMC and

product safety isSony Deutschland

GmbH, Hedelfinger Strasse 61,

70327 Stuttgart, Germany. For any

service or guarantee matters please

refer to the addresses given in

separate service or guarantee

documents.

On safety

• To prevent fire or shock

hazard, do not place objects

filled with liquids, such as

vases, on the player, or place

the player near water, such as

near a bathtub or shower room.

Should any solid object or

liquid fall into the cabinet,

unplug the player and have it

checked by qualified

• Do not use solvents such as

benzine, thinner,

Precautions

commercially available disc/

lens cleaners, or anti-static

spray intended for vinyl LPs.

• If you have printed the disc’s

label, dry the label before

playing.

• Do not use the following discs.

– A disc that has a non-

standard shape (e.g., card,

heart).

• This unit operates on 220 V –

240 V AC, 50 Hz/60 Hz. Check

that the unit’s operating voltage

is identical with your local power

supply.

• To prevent fire or shock hazard,

do not place objects filled with

liquids, such as vases, on the

apparatus.

• Install this unit so that the mains

lead can be unplugged from the

wall socket immediately in the

event of trouble.

personnel before operating it

any further.

• Do not touch the AC power

cord (mains lead) with wet

hands. Doing so may cause an

electric shock.

– A disc with a label or sticker

on it.

On placement

• Place the player in a location

with adequate ventilation to

prevent heat build-up in the

player.

– A disc that has cellophane

tape or sticker adhesive on it.

• Do not resurface the playing

side of a disc to remove

surface scratches.

Notes About the Discs

• To keep the disc clean, handle

the disc by its edge. Do not

touch the surface.

Dust, fingerprints, or scratches

on the disc may cause it to

malfunction.

• Do not place the player on a

soft surface such as a rug that

might block the ventilation

holes.

• Do not install this player in a

confined space, such as a

bookshelf or similar unit.

• Do not place the player in a

location near heat sources, or

in a place subject to direct

sunlight, excessive dust, or

mechanical shock.

• If the player is brought directly

from a cold to a warm location,

or is placed in a very damp

room, moisture may condense

on the lenses inside the player.

Should this occur, the player

may not operate properly. In

this case, remove the disc and

leave the player turned on for

about half an hour until the

moisture evaporates.

• Do not expose the disc to

direct sunlight or heat sources

such as hot air ducts, or leave it

in a car parked in direct

sunlight as the temperature

may rise considerably inside

the car.

• After playing, store the disc in

its case.

• Do not install the player in an

inclined position. It is

designed to be operated in a

horizontal position only.

• Keep the player and the discs

away from equipment with

strong magnets, such as

microwave ovens, or large

loudspeakers.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

• Do not place heavy or unstable

objects on the player.

• This Blu-ray Disc/DVD player

incorporates High-Definition

Multimedia Interface

On cleaning

Clean the cabinet, panel, and

controls with a soft cloth slightly

moistened with a mild detergent

solution. Do not use any type of

abrasive pad, scouring powder

or solvent such as alcohol or

benzine.

• Do not place any objects other

than discs on the disc tray.

Doing so may cause damage to

the player or the object.

• When you move the player,

take out any discs. If you

don’t, the disc may be

(HDMI™) technology.

HDMI, the HDMI logo and

High-Definition Multimedia

Interface are trademarks or

registered trademarks of

HDMI Licensing LLC.

• “Blu-ray Disc” is a trademark.

• “Blu-ray Disc,” “DVD+RW,”

“DVD-RW,” “DVD+R,”

“DVD-R,” “DVD VIDEO,”

and “CD” logos are

damaged.

On cleaning discs, disc/

lens cleaners

Do not use cleaning discs or

disc/lens cleaners (including wet

or spray types). These may cause

the apparatus to malfunction.

• When you move the player,

disconnect the AC power cord

(mains lead) and all other

cables from the player.

trademarks.

• “BonusView” is a trademark

of Blu-ray Disc Association.

• “x.v.Colour” and “x.v.Colour”

logo are trademarks of Sony

Corporation.

• “BRAVIA Sync” is a

trademark of Sony

Corporation.

• “PhotoTV HD” and the

“PhotoTV HD” logo are

trademarks of Sony

Corporation.

• Other system and product

names are generally

On power sources

• The player is not disconnected

from the AC power source

(mains) as long as it is

connected to the wall outlet,

even if the player itself has

been turned off.

• If you are not going to use the

player for a long time, be sure

to disconnect the player from

the wall outlet. To disconnect

the AC power cord (mains

lead), grasp the plug itself;

never pull the cord.

• Observe following points to

prevent the AC power cord

(mains lead) being damaged. If

the AC power cord (mains

lead) is damaged, it may result

in a fire or an electric shock.

– Do not pinch the AC power

cord (mains lead) between

the player and wall, shelf,

etc.

– Do not put anything heavy

on the AC power cord

(mains lead) or pull on the

AC power cord (mains lead)

itself.

On replacement of parts

In the events that this player is

repaired, repaired parts may be

collected for reuse or recycling

purposes.

Copyrights and

Trademarks

• This product incorporates

technology that is protected by

U.S. patents and other

intellectual property rights.

Use of this copyright

protection technology must be

authorized by Macrovision,

and is intended for home and

other limited viewing uses

only unless otherwise

authorized by Macrovision.

Reverse engineering or

disassembly is prohibited.

• “AVCHD” and the “AVCHD”

logo are trademarks of

Matsushita Electric Industrial

Co., Ltd. and Sony

trademarks or registered

trademarks of the

manufacturers. ™ and ®

marks are not indicated in this

document.

IMPORTANT NOTICE

Caution: This player is

capable of holding a still

video image or on-screen

display image on your

television screen

indefinitely. If you leave the

still video image or on-

screen display image

displayed on your TV for an

extended period of time you

risk permanent damage to

your television screen.

Plasma display panel

televisions and projection

televisions are susceptible to

this.

Corporation.

• Java and all Java-based

trademarks and logos are

trademarks or registered

trademarks of Sun

On adjusting volume

Do not turn up the volume while

listening to a section with very

low level inputs or no audio

signals. If you do, the speakers

may be damaged when a peak

level section is played.

Microsystems, Inc.

•

, “XMB,” and “xross media

bar” are trademarks of Sony

Corporation and Sony

Computer Entertainment Inc.

If you have any questions or

problems concerning your

player, please consult your

nearest Sony dealer.

Download from Www.Somanuals.com. All Manuals Search And Download.

About this manual

• In this manual, “disc” is used

as a general reference for the

BDs, DVDs, or CDs unless

otherwise specified by the text

or illustrations.

• Icons, such as

, listed

at the top of each explanation

indicate what kind of media

can be used with the function

being explained.

For details, see “Playable

Discs” (page 59).

• Instructions in this manual

describe the controls on the

remote. You can also use the

controls on the player if they

have the similar symbols as

those on the remote.

• The on-screen display

illustrations used in this

manual may not match the

graphics displayed on your TV

screen.

• NEED-to-know information

(to prevent incorrect

operation) is listed under the

b icon. NICE-to-know

information (tips and other

useful information) is listed

under the z icon.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Hookups and Settings

Hooking Up the Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Step 1: Connecting to Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Connecting to an HDMI jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

About the BRAVIA Sync features (for HDMI connections only) . . . . . . 16

Connecting to component video jacks (Y, P b /C b , P r /C r ) . . . . . . . . . . . 17

Connecting to an audio/video or S VIDEO jack . . . . . . . . . . . . . . . . . . 18

Step 2: Connecting to Your AV Amplifier (Receiver) . . . . . . . . . . . . . . . . . . . 19

Connecting to an HDMI jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Connecting to digital jacks (OPTICAL/COAXIAL) . . . . . . . . . . . . . . . . . 21

Connecting to audio L/R jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Step 3: Inserting the External Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Step 4: Connecting to the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

When connecting to a broadband router directly . . . . . . . . . . . . . . . . . 24

When connecting via a wireless LAN router . . . . . . . . . . . . . . . . . . . . . 25

Step 5: Connecting the Mains Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Step 6: Preparing the Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Controlling TVs with the remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Step 7: Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Playback

Playing BDs/DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Using the BD’s or DVD’s menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Enjoying BonusView . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Searching for a scene quickly (Scene Search) . . . . . . . . . . . . . . . . . . . 33

Searching for a Title/Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Displaying the playing time and play information . . . . . . . . . . . . . . . . . 34

Adjusting pictures and sound for videos . . . . . . . . . . . . . . . . . . . . . . . . 34

Playing CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Playing Photo Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Settings and Adjustments

Using the Settings Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Network Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Video Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Audio Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

BD/DVD Viewing Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Photo Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Resetting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Information

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Self-Diagnosis Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Video Output Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Audio Output Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 5

Parental Control/Area Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Terms and Conditions of Use and End User License Agreement . . . . . . . . . 66

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Before operating the player, please read “Terms and Conditions of Use and End User License

Agreement” (page 66).

Download from Www.Somanuals.com. All Manuals Search And Download.

A Z (open/close) (page 30)

Opens or closes the disc tray.

Guide to Parts and

Controls

THEATRE (page 16)

Switches to the optimum video mode for

watching movies automatically. When

connected with an AV amplifier

(receiver) using the HDMI cable, the

speaker output also switches

For more information, see the pages in

parentheses.

automatically. Press the button again to

return to the original setting.

When connected with a Theatre Mode-

compatible TV using the HDMI cable,

the TV’s video mode switches to Theatre

Mode.

Remote

The THEATRE button functions only when

connected to a Theatre Mode-compatible TV.

TV [/1 (on/standby) (page 26)

Turns on the TV, or sets to standby mode.

[/1 (on/standby) (page 27)

Turns on the player, or sets to standby

mode.

B Number buttons (page 33, 52)

Enters the title/chapter numbers, etc.

CLEAR

Clears the entry field.

C TIME (page 11)

Displays the elapsed/remaining playback

time in the front panel display. Each time

you press the button, the display switches

between elapsed playback time and

remaining playback time.

AUDIO (page 47)

Selects the language track when multi-

lingual tracks are recorded on BD-

ROMs/DVD VIDEOs.

Selects the sound track on CDs.

SUBTITLE (page 47)

Selects the subtitle language when multi-

lingual subtitles are recorded on BD-

ROMs/DVD VIDEOs.

ANGLE

Switches to other viewing angles when

multi-angles are recorded on BD-ROMs/

DVD VIDEOs.

Number 5, AUDIO, PROG +, and N buttons have

a tactile dot. Use the tactile dot as a reference when

operating the player.

DISPLAY (page 34)

Displays the playback information on the

screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

When you press and hold the button, fast

forward/fast reverse continues at the

selected speed until you release the

button.

* Search speed does not change when playing

CDs.

D Colour buttons (red/green/

yellow/blue)

Short cut keys for selecting items on

some BD’s menus (can also be used for

BD’s Java interactive operations).

E TOP MENU (page 32)

Opens or closes the BD’s or DVD’s Top

Menu.

Speed multiple values are approximate.

– To resume normal playback, press N.

N (play) (page 30)

POP UP/MENU (page 32)

Opens or closes the BD-ROM’s Pop-up

Menu, or the DVD’s menu.

Starts or re-starts playback.

Resumes playback from the point where

you press x (Resume Play).

Plays a slideshow when a disc containing

JPEG image files is inserted.

OPTIONS (page 32, 37)

The options menu that can be selected

appears on the screen.

SCENE SEARCH (page 33)

Switches to Scene Search mode that lets

you move quickly between scenes within

the title currently being played back.

HOME (page 39)

Enters the player’s home menu.

Exits the home menu when a CD is

inserted.

X (pause)

Pauses or re-starts playback.

RETURN

Returns to the previous display.

x (stop)

Stops playback and remembers the stop

point (resume point) (page 31, 36).

The resume point for a title/track is the

last point you played or the last photo for

a photo folder.

</M/m/,

Moves the highlight to select a displayed

item.

Centre button (ENTER)

Enters the selected item.

G For TVs operable with the following

F ./> (previous/next)

Skips to the previous/next chapter, track,

or file.

buttons, see page 26.

% (muting)

Mutes the TV sound.

To go to the beginning of the previous

track, press . twice.

2 (volume) +/–

Adjusts the TV volume.

(instant replay/instant

advance)

Replays the scene/briefly fast forwards

PROG (programme) +/–

Selects the TV channels up and down.

the scene.

t (input select)

Switches between TV and other input

sources.

m/M

(fast reverse/fast forward)

Fast reverses/fast forwards the disc when

pressed during playback.

Each time you press the button, search

speed changes as follows*:

Playback direction

M1 (×10) t M2 (×30) t M3

(×120)

Reverse direction

n1 (×1) t m1 (×10) t m2 (×30)

t m3 (×120)

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Front panel

A [/1 (on/standby) (page 27)

Turns on the player, or sets to standby

mode.

To lock the disc tray (Child Lock)

You can lock the disc tray to prevent it being

opened by mistake.

When the player is turned on, hold down X

on the player for more than 10 seconds until

“LOCKED” appears in the front panel

display. The disc tray is locked.

B Disc tray (page 30)

C Blu-ray Disc indicator

Lights up when a BD is recognised.

To unlock the disc tray, hold down X on the

player until “UNLOCK” appears in the front

panel display.

When the player is turned on for the first time,

the Blu-ray Disc indicator lights up, then turns

off when Easy Setup is complete.

D Front panel display (page 11)

E Remote sensor (page 26)

F 24P indicator (page 43)

Lights up when outputting 1080p/24 Hz

video signals of BD-ROMs.

G N (play), X (pause), x (stop)

(page 30)

Starts, pauses, or stops playback.

H A (open/close) (page 30)

Opens or closes the disc tray.

Download from Www.Somanuals.com. All Manuals Search And Download.

Front panel display

A N, X

F Network connection indicator

Lights up when downloading the player’s

software.

Lights up during playback or pause.

B HD (page 42)

For details on downloading the player’s

software, see page 40.

Lights up when outputting 720p/1080i/

1080p video signals from the HDMI

OUT jack or 720p/1080i video signals

from the COMPONENT VIDEO OUT

jacks.

C HDMI (page 16)

Lights up when an HDMI device is

connected.

D EXT (page 23)

Lights up when the external memory is

recognised.

E Playback information

You can check the time information.

Press TIME repeatedly during playback.

The display changes as follows.

When playing a BD-ROM/DVD VIDEO

Elapsed time of the current title

Remaining time of the current title

When playing a CD

Elapsed time of the current track

Remaining time of the current track

Elapsed time of the current disc

Remaining time of the current disc

“T” (Title or Track), “C” (Chapter), or “D”

(Disc) may be displayed depending on the

disc.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear panel

A COMPONENT VIDEO OUT

E Ventilation holes

The ventilation fan is inside the player.

(Y, P^B/CB, PR/CR) jacks (page 17)

F EXT slot (page 23)

B LINE OUT (S VIDEO) jack

(page 18)

G DIGITAL OUT (OPTICAL/

COAXIAL) jacks (page 21)

C LINE OUT (R-AUDIO-L) jacks

(page 18, 22)

H LINE OUT (VIDEO) jack (page 18)

I HDMI OUT jack (page 15, 20)

J LAN (100) terminal (page 24)

D AC IN terminal (page 25)

Download from Www.Somanuals.com. All Manuals Search And Download.

Hooking Up the Player

Check that you have the following items.

• Audio/video cable (phono plug ×3) (1)

• Mains lead (1)

• Remote commander (remote) (1)

• R6 (size AA) batteries (2)

Follow steps 1 through 7 to hook up and

adjust the settings of the player. Do not

connect the mains lead until you reach

“Step 5: Connecting the Mains Lead”

(page 25).

Hookups and

Settings

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 1: Connecting to Your TV

About video/HDMI OUT jacks

The player has the following video jacks. Connect the player to your TV according to the input

jack on your TV.

When connecting the player to your TV using the HDMI cable, you can enjoy high quality

digital pictures and sound through the HDMI OUT jack.

Jack type

Video resolution Hookup

High

quality

Digital

High Definition:

1080/24p, 1080p,

1080i, 720p

See “Connecting to an

HDMI jack”

(page 15).

Standard Definition:

576p/480p, 576i/

480i

Analogue

High Definition:

1080i, 720p

See “Connecting to

component video

Standard Definition: jacks (Y, Pb/Cb, Pr/

576p/480p, 576i/

480i

Cr)” (page 17).

Standard Definition: See “Connecting to an

576i/480i

audio/video or S

VIDEO jack”

(page 18).

Standard Definition: See “Connecting to an

576i/480i

audio/video or S

VIDEO jack”

(page 18).

Standard

quality

To connect to a TV with DVI input

Use an HDMI-DVI converter cable (not

supplied). The DVI jack will not accept any

audio signals, so you have to use another

audio connection in addition to this

connection (page 19).

• Plug in cables securely to prevent unwanted

noise.

• Refer to the instructions supplied with the

components to be connected.

• You cannot connect this player to a TV that does

not have a video input jack.

Furthermore, you cannot connect the HDMI

OUT jack to DVI jacks that are not HDCP

compliant (e.g., DVI jacks on PC displays).

• Do not apply too much pressure on the connecting

cables. Pushing against the cabinet wall, etc., may

damage the cable.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to an HDMI jack

Connect the player and your TV using an HDMI cable to enjoy high quality digital pictures and

sound through the HDMI OUT jack.

If you connect a Sony TV that is compatible with the “Control for HDMI” function (page 16),

refer to the operating instructions supplied with the TV.

If you connect a 1080/24p- or 1080p-compatible TV, use a High Speed HDMI cable.

Blu-ray Disc/DVD player

HDMI cable (not supplied)

• Be sure to disconnect the HDMI cable when

moving the player.

Notes on connecting to the HDMI OUT jack

Observe the following as improper handling

may damage the HDMI OUT jack and the

connector.

• Carefully align the HDMI OUT jack on the

rear of the player and the HDMI connector

by checking their shapes. Make sure the

connector is not upside down or tilted.

• If you place the player on a cabinet with the

HDMI cable connected, do not apply too

much pressure to the cabinet wall. It may

damage the HDMI OUT jack or the HDMI

cable.

• When connecting or disconnecting, do not

screw in or rotate the HDMI connector.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

• Theatre

About indicators for HDMI connection

When connecting an HDMI compatible

component, the HDMI indicator lights up in

the front panel display.

When you press THEATRE, the player

automatically switches to the optimum

video mode for watching movies. When

connected with an AV amplifier (receiver)

using the HDMI cable, the speaker output

also switches automatically. When

connected with a Theatre Mode-compatible

TV using the HDMI cable, the TV’s video

mode switches to Theatre Mode. Press the

button again to return to the original setting.

• Language Follow

• Consumers should note that not all high definition

television sets are fully compatible with this

product and may cause artifacts to be displayed in

the picture. In the case of 480p/576p/720p/1080i/

1080p scan picture problems, it is recommended

that the user switch the connection to the

‘standard definition’ output. If there are questions

regarding our TV set compatibility with this

model 480p/576p/720p/1080i/1080p Blu-ray

Disc/DVD player, please contact our customer

service centre.

When you change the language for the on-

screen display on your TV, the player’s

language for the on-screen display is also

changed after turning the player off and on.

• If the picture is not clear, not natural or not to your

satisfaction, change the video output resolution in

step 3 of “Output Video Format” under the

“Video Settings” setup (page 42).

• Be sure to use only an HDMI cable that bears the

HDMI logo.

To prepare for the BRAVIA Sync features

Set “Control for HDMI” to “On” in the

“System Settings” setup (page 50).

For details on settings of your TV or other

connected components, refer to the operating

instructions supplied with the TV or

components.

About the BRAVIA Sync

features (for HDMI connections

only)

• When connecting the Sony TV that is compatible

with the “Control for HDMI” Easy Setting

function using the HDMI cable, the “Control for

HDMI” setting of the player automatically

switches to “On” if the “Control for HDMI”

setting on the connected TV is set to “On.” Refer

to the operating instructions supplied with the

TV.

By connecting Sony components that are

compatible with the “Control for HDMI”

function with an HDMI cable (not supplied),

operation is simplified as below:

• One-Touch Play

With one touch of the following buttons, the

connected TV turns on and the input

selector on the TV is switched to the player

automatically.

• When connecting the Sony TV that is compatible

with the BRAVIA Sync features using the HDMI

cable, you can control the basic functions of the

player with the TV’s remote if the “Control for

HDMI” setting on the connected TV is set to

“On.” Refer to the operating instructions supplied

with the TV.

– [/1

– HOME: The home menu appears

automatically (page 39).

– N: Playback starts automatically

(page 31).

• System Power-Off

When you turn off the TV using the power

button on the TV’s remote, the player and

HDMI-compatible components turn off

automatically.

Depending on the connected component, the

“Control for HDMI” function may not work. Refer

to the operating instructions supplied with the

component.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to component video jacks (Y, PB/CB, PR/CR)

Connect the COMPONENT VIDEO OUT jacks of the player and your TV using a component

video cable or three video cables (not supplied) of the same kind and length. You can enjoy

high-quality pictures.

Be sure to connect to the LINE OUT (R-AUDIO-L) jacks using the audio/video cable.

Blu-ray Disc/DVD player

(green)

(blue)

(red)

(white)

Component video

cable (not supplied)

Audio/video cable

(supplied)

(red)

(white)

(green)

(blue)

(red)

Match the colour of the plug to that

of the jack.

Match the colour of the plug to

that of the jack.

: Signal flow

When you connect the player and TV using a

component video cable, disconnect the video plug

(yellow) of the audio/video cable.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to an audio/video or S VIDEO jack

Connect the LINE OUT (VIDEO, R-AUDIO-L) jacks of the player and your TV using the

audio/video cable. You can enjoy standard quality pictures and sound.

Blu-ray Disc/DVD player

(yellow)

(red)

(white)

S-video cable

(not supplied)

Audio/video cable

(supplied)

(yellow)

(red)

(white)

Match the colour of the plug to

that of the jack.

: Signal flow

When you connect the player and TV using an S-

video cable, disconnect the video plug (yellow) of

the audio/video cable.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 2: Connecting to Your AV Amplifier (Receiver)

About audio/HDMI OUT jacks

The player has the following audio jacks. Connect the player to your AV amplifier (receiver)

according to the input jack on your AV amplifier (receiver).

Jack type

Hookup

Digital

See “Connecting to an HDMI jack” (page 20).

See “Connecting to digital jacks (OPTICAL/

COAXIAL)” (page 21).

Analogue

See “Connecting to audio L/R jacks” (page 22).

For correct speaker location, refer to the operating

instructions supplied with the connected

components.

• When you connect the player to your AV

amplifier (receiver) using an HDMI cable, do one

of the following:

– Connect your AV amplifier (receiver) to your

TV using an HDMI cable, or

– Connect the player to your TV using a video

cable other than an HDMI cable (component

video cable, S-video cable, or audio/video

cable).

• If you connect a component that does not conform

to the selected audio signal, a loud noise (or no

sound) will come from the speakers, which could

damage your ears or the speakers.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to an HDMI jack

If your AV amplifier (receiver) has an HDMI input, you can enjoy surround sound.

If you connect a Sony AV amplifier (receiver) that is compatible with the “Control for HDMI”

function (page 16), refer to the operating instructions supplied with the AV amplifier (receiver).

Blu-ray Disc/DVD player

HDMI cable (not supplied)

AV amplifier (receiver)

HDMI cable (not supplied)

Set the following settings and you can enjoy higher

quality sound from the connected AV amplifier

(receiver).

Not all HDMI-compatible AV amplifiers

(receivers) accept 8ch Linear PCM signals. Refer as

well to instructions supplied with the connected AV

amplifier (receiver).

– Set “Audio Output Priority” to “HDMI” in the

“Audio Settings” setup (page 44).

– Set “Audio (HDMI)” to “Auto” in the “Audio

Settings” setup (page 44).

– Set “BD Audio Setting” to “Direct” in the “Audio

Settings” setup (page 45).

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to digital jacks (OPTICAL/COAXIAL)

If your AV amplifier (receiver) has a Dolby Digital, Dolby Pro Logic, or DTS decoder and

a digital input jack, you can enjoy Dolby Digital (5.1ch), Dolby Pro Logic (4.0ch), or DTS

(5.1ch) surround effects.

Blu-ray Disc/DVD player

Optical digital cable

(not supplied)

Coaxial digital cable

(not supplied)

AV amplifier (receiver)

: Signal flow

1 Connect the digital jack of the player

and your AV amplifier (receiver).

2 Set “Audio Output Priority” to

“Coaxial/Optical” in the “Audio

Settings” setup (page 44).

3 Make the appropriate settings in

“Dolby Digital” and “DTS” under the

“Audio Settings” setup (page 45).

Otherwise, no sound or a loud noise will

come from your speakers.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to audio L/R jacks

If your AV amplifier (receiver) only has L and R audio input jacks, use this connection.

Blu-ray Disc/DVD player

(red)

(white)

Audio/video cable (supplied)

(red)

(white)

Match the colour of the plug

to that of the jack.

AV amplifier (receiver)

: Signal flow

Download from Www.Somanuals.com. All Manuals Search And Download.

• Do not connect anything other than a USB flash

memory, such as an HDD, etc., to the EXT slot.

• Insert the external memory straight. If you force

the external memory into the slot, this will cause

damage to both the external memory and the

player.

• Keep the external memory away from small

children to prevent them from accidentally

swallowing the external memory.

• Do not apply too much pressure to the external

memory in the slot, as it may cause a malfunction.

• We recommend use of the Sony USM1GH

available as of April 2008.

Step 3: Inserting the

External Memory

To enjoy additional content (such as

BonusView) on certain Blu-ray Disc titles,

you will need to use external memory.

Insert the external memory device (1 GB or

larger USB flash memory, such as Sony

USM1GH) into the EXT slot as your local

storage.

• Other USB flash devices may support this

function. However we cannot guarantee

compatibility with all USB flash memories.

• When inserting a USB flash memory other than

Sony USM1GH, check the insertion direction

before inserting it.

• Depending on the USB flash memory, it may

stick out from the EXT slot. Do not force into the

slot or apply pressure to the protruding portion of

the USB flash memory.

Insert the external memory in the V

direction into the EXT slot as far as it will

go.

Check that the EXT indicator lights up in the

front panel display when turning the player

on.

Rear of the player

• To avoid data corruption or damage to the

external memory, turn the player off when

inserting or removing the external memory.

• When the EXT indicator does not light up, turn

the player off, remove and re-insert the external

memory, then turn the player on again.

• Do not insert the external memory that contains

photo or music files to avoid corrupting the

external memory data.

Sony USM1GH

(not supplied)

With the terminal side up

To enjoy BonusView

See “Enjoying BonusView” (page 32).

To remove the external memory

Press [/1 to turn the player off.

Pull out the external memory from the

EXT slot.

Download from Www.Somanuals.com. All Manuals Search And Download.

When connecting to a

Step 4: Connecting to

the Network

broadband router directly

Blu-ray Disc/DVD player

Connect the LAN (100) terminal of the player

to your Internet source using a network cable

to update the player’s software using the

network.

1 Connect the LAN (100) terminal of the

player to your Internet source.

Methods to connect to your Internet

source include:

• Connecting to a broadband router

directly

Network cable

(not supplied)

• Connecting via a wireless LAN router

Refer also to the instructions supplied

with the broadband router or the wireless

LAN router.

Broadband router

To PC

2 Make the appropriate settings in

“Internet Settings” under the

“Network Settings” setup (page 51).

Network cable

(not supplied)

To update the player’s software using the

network

See “Network Update” (page 40) and

“Software Update Notification” (page 50).

ADSL modem/

Cable modem

Do not connect a phone line to the LAN (100)

terminal, as it may cause a malfunction.

Internet

About network (LAN) cables

Depending on the modem or router, the type

of network (LAN) cable, straight or crossing,

differs. For details on the network (LAN)

cables, refer to the operating instructions

supplied with the modem or router.

Download from Www.Somanuals.com. All Manuals Search And Download.

When connecting via a

wireless LAN router

Step 5: Connecting the

Mains Lead

Blu-ray Disc/DVD player

After all of the other connections are

complete, connect the supplied mains lead

(AC power cord) to the AC IN terminal of the

player. Then plug the player and TV mains

leads (AC power cords) into the mains.

Network cable

(not supplied)

to AC IN

Ethernet/wireless

LAN media converter

to mains

To PC

Wireless LAN router

(access point)

Network cable

(not supplied)

ADSL modem/

Cable modem

Internet

Do not connect the LAN terminal of the player to

the LAN terminal of the PC.

Download from Www.Somanuals.com. All Manuals Search And Download.

Controlling TVs with the

remote

Step 6: Preparing the

Remote

You can control the volume, input source,

programme position, and power switch of

your Sony TV with the supplied remote.

You can control the player using the supplied

remote. Insert two R6 (size AA) batteries by

matching the 3 and # ends on the batteries

to the markings inside the battery

When you replace the batteries of the remote, the

code number may be reset to the default setting. Set

the appropriate code number again.

compartment. When using the remote, point

it at the remote sensor

(page 10).

on the player

TV [/1

Number

buttons

• Use the batteries correctly to avoid possible

leakage and corrosion. Should leakage occur, do

not touch the liquid with bare hands. Observe the

following:

– Do not use a new battery with an old battery, or

batteries of different manufacturers.

– Do not attempt to recharge the batteries.

– If you do not intend to use the remote for an

extended period of time, remove the batteries.

– If battery leakage occurs, wipe out any liquid

inside the battery compartment, and insert new

batteries.

2 +/–

PROG +/–

• Do not expose the remote sensor (marked

the front panel) to strong light, such as direct

sunlight or a lighting apparatus. The player may

not respond to the remote.

Available buttons

Depending on the connected unit, you may

not be able to control your TV with some or

all of the buttons (TV

[

PROG +/–

+/–,

%, or number buttons).

Buttons

Operations

Turns your TV on or off.

TV [/1

2 (volume) +/– Adjusts the volume of

your TV.

PROG

Selects the programme

(programme) +/– position on your TV.

t (input select) Switches your TV’s input

source between the TV

and other input sources.

% (muting)

Mutes the sound.

Download from Www.Somanuals.com. All Manuals Search And Download.

To control other TVs with the remote

You can control the volume, input source,

programme position, and power switch of

non-Sony TVs as well.

If your TV is listed in the table below, set the

appropriate manufacturer’s code.

Step 7: Easy Setup

Follow the steps below to make the minimum

number of basic adjustments for using the

player. If you do not complete Easy Setup, it

will appear each time you turn on your

player.

If you enter a new code number, the code number

previously entered will be erased.

Make the settings below in the following

order.

While holding down TV [/1, enter the

TV’s manufacturer code using the

number buttons.

When turned on for the first time

Wait for a short while before the player

turns on and starts Easy Setup.

For instance, to enter “09,” press “0” then

“9.”

Code numbers of controllable TVs

If more than one code number is listed,

try entering them one at a time until you

find the one that works with your TV.

[/1

TV [/1

Manufacturer

Sony

Code number

01 (default)

Hitachi

JVC

LG/Goldstar

Panasonic

Philips

</M/m/,,

ENTER

17, 49

06, 08, 72

RETURN

HOME

Samsung

Sharp

Toshiba

Release TV [/1.

1 Turn on the TV.

2 Press [/1 to turn on the player.

The player turns on after a moment.

3 Switch the input selector on your TV so

that the signal from the player

appears on your TV screen.

The display for OSD language selection

appears.

• If the display for OSD language

selection does not appear

Press HOME, and select “Easy Setup”

in the “Setup” setup (page 53). Then,

select “Start,” and press ENTER.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Select a language for the on-screen

displays using M/m, and press

ENTER.

7 Select a video output resolution for

the connected TV, and press ENTER.

For details about the video output

resolution, see page 43.

When you select “HDMI” in step 6

The initial settings message appears.

5 Select “Start,” and press ENTER.

Select from “Auto,” “480i/576i,” “480p/

576p,” “720p,” “1080i,” or “1080p.”

When connecting the HDMI OUT jack

and other video output jacks at the same

time, video signals may not output from

the jacks, other than from the HDMI

OUT jack, when “Auto” or “1080p” is

selected.

When connecting other equipment at the

same time, press RETURN to return to

step 6 and change the “TV Connection

Method” setting.

6 Select the cable type used to connect

the player and your TV, and press

ENTER.

When you select “Component Video” in

step 6

Select “HDMI” when connecting your

TV using the HDMI cable, and go to step

Select from “480i/576i,” “480p/576p,”

“720p,” or “1080i.”

When you change the video output

resolution, a picture is displayed in the

selected resolution for about 30 seconds,

then the display asks for confirmation.

Follow the on-screen instructions and go

to the next step.

When connecting the HDMI OUT jack and

other video output jacks at the same time,

select “Component Video.”

Select “Component Video” when

connecting your TV using the component

video cable, and go to step 7.

Select “Video or S Video” when

connecting your TV using the video

cable or S-video cable, and go to step 8.

Download from Www.Somanuals.com. All Manuals Search And Download.

10 Select “Finish,” and press ENTER.

If the picture is distorted or no picture appears,

wait for about 30 seconds without pressing any

buttons. The display returns to the resolution

setting screen.

If the selected video output resolution is

incorrect, no picture appears on the screen

when you press any button in 30 seconds. In

this case, press x on the player for more than

10 seconds to reset the video output resolution

to the lowest resolution. To change the video

output resolution, set “Output Video Format”

in the “Video Settings” setup (page 42).

8 Select an aspect ratio that matches

your TV, and press ENTER.

• You can reset settings to their factory settings

(page 53).

• You can run “Easy Setup” again from “Easy

Setup” in “Setup” (page 53).

Select “16:9” when connecting to a wide-

screen TV or a TV with a wide mode

function.

Select “4:3” when connecting to a 4:3

screen TV without a wide mode function.

9 (Only when connecting your TV using

the HDMI cable)

Set the “Control for HDMI” function to

“On” or “Off,” and press ENTER.

Select “On” to use the “Control for

HDMI” function when connecting Sony

components that are compatible with the

“Control for HDMI” function (page 16).

If you do not use the “Control for HDMI”

function, select “Off.”

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing BDs/DVDs

DVD

Number

buttons

</M/m/,,

ENTER

OPTIONS

HOME

1 ^{Switch the input selector on your TV so}

that the signal from the player

appears on your TV screen.

Playback

2 Press Z, and place a disc on the disc

tray.

Playing side facing down

3 Press Z to close the disc tray.

• When you insert a commercially

available BD-ROM or DVD VIDEO,

playback automatically starts

depending on the disc.

Playback does not start by pressing N while

the disc tray is open.

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Press HOME.

• The point where you stopped playing is cleared

from memory when:

5 Select “Video” using </,.

– you open the disc tray,

– you play another title,

– you change the settings on the player, or

– you remove the external memory (for BD-

ROMs).

6 Select using M/m, and press N or

ENTER.

• The player may not resume playback depending

on the disc or stop point.

To play restricted BDs or DVDs (Parental

Control)

When you play a restricted BD, change the

“BD Parental Control” setting in the “BD/

DVD Viewing Settings” setup (page 47).

When you play a restricted DVD, the display

for entering your password appears on the

screen.

Enter your four-digit password using the

number buttons, and press ENTER.

Playback starts.

For commercially available BD-ROMs

or DVD VIDEOs, playback starts.

For BDs or DVDs recorded on other

equipment, the title list appears. Select a

title using M/m, and press N or

ENTER.

Playback starts.

To register or change the password, see

“Password” (page 49).

To stop playback

Press x.

To play restricted BD-REs or BD-Rs (Disc

Lock)

When you play a BD-RE or BD-R restricted

by the Disc Lock function, the display for

entering your password appears on the

screen.

To pause playback

Press X.

In the title list, “PL” (Playlist) is displayed next to

the name of titles that are created and edited from

their originals.

Enter the four-digit password that has

been registered when creating the disc

using the number buttons, and press

ENTER.

• Depending on the disc you may not be able to do

some of the playback operations. Refer to the

instruction manual supplied with the disc.

• Depending on BDs or DVDs recorded on other

equipment, title lists or title names may not be

displayed.

Select a title, and press N or ENTER.

Playback starts.

One-Touch Play (for HDMI connection

only)

Press N.

The player and the connected TV turn on and

the input selector on the TV is switched to the

player, then playback starts automatically.

To resume playback from the point where

you stopped (Resume Play)

After stopping playback, select

m, and press N or ENTER.

The player resumes playback from the point

using M/

where you pressed x.

• When using the HDMI connection, there may be

a delay before the playback picture appears on the

screen, and the beginning portion of the playback

picture may not be displayed.

• To use the One-Touch Play function, set “Control

for HDMI” to “On” in the “System Settings”

setup (page 50).

To start from the beginning, press OPTIONS

to select “Play from start,” and press ENTER.

Playback starts from the beginning of the

title.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Available OPTIONS

Using the BD’s or DVD’s menu

Press OPTIONS.

The options menu appears.

BD DVD

Select an item using M/m, and press

ENTER.

The available items differ depending on

the disc type or player situation.

To display Top Menu

When you play a BD or DVD, you can

display the Top Menu.

Press TOP MENU during playback.

The Top Menu appears.

Items

Details

A/V Settings

Adjusts settings for

picture and sound.

• Video Settings

(page 34)

Select an item using </M/m/,.

To display Pop-up Menus

Some BD-ROMs contain Pop-up Menus that

appear without interrupting playback.

• Audio Settings

(page 35)

Press POP UP/MENU during playback.

The Pop-up Menu appears.

Title List

Play

Displays the title list.

Plays the title from the

point where you pressed

Select an item using </M/m/,, colour

buttons, or the number buttons, and

follow the on-screen instructions.

Play from start Plays the title from the

beginning.

Top Menu

Displays the disc’s Top

Menu (page 32).

Enjoying BonusView

Menu/Popup Displays the BD-

ROM’s Pop-up Menu or

DVD’s menu (page 32).

Some BD-ROMs have bonus contents and

other data that can be downloaded to the

external memory (local storage) for

enjoyment.

Stop

Stops playback.

Title Search

Searches for a title and

starts playback from the

beginning (page 33).

1 Turn the player off.

Chapter

Searches for a chapter

and starts playback

from the beginning

(page 33).

2 Insert the external memory (not

supplied) into the EXT slot on the rear

of the player.

The external memory is used as the local

storage.

Make sure that the external memory is

properly inserted into the player

(page 23).

3 Turn the player on.

4 Insert a BD-ROM with BonusView.

The operation method differs depending

on the disc. Refer to the instruction

manual supplied with the disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

To delete data in the external memory

4 Press SCENE SEARCH, ENTER, N, or

You can delete all unnecessary data at once.

Playback starts.

Press HOME.

Select “Video” using </,.

To cancel Scene Search mode

Press SCENE SEARCH, ENTER, N, or X.

Playback starts from the point you pressed

the button.

Select “BD Data” using M/m, and press

OPTIONS.

Select “Erase,” and press ENTER.

Select “OK,” and press ENTER.

• The Scene Search function is available for titles

longer than 100 seconds and shorter than 100

hours.

Searching for a scene quickly

(Scene Search)

• The Scene Search function may not be available

depending on the disc.

BD DVD

You can move quickly between scenes within

the title currently being played back.

Searching for a Title/Chapter

DVD

1 Press SCENE SEARCH during playback

or in pause mode.

You can search for a chapter if the title

contains chapter marks.

Playback pauses and a bar with a scene

indicator (square-shaped – indicates the

current point) appears at the bottom of

the screen.

1 Press OPTIONS during playback or in

pause mode.

The options menu appears.

2 Move the scene indicator to the scene

you are searching for using </, or

m/M.

2 Select a search method using M/m,

and press ENTER.

“Title Search” (for BD-ROMs/DVD

VIDEOs)

Scene indicator

“Chapter Search”

The display for entering the number

appears.

Example: Chapter Search

The current point

The scene indicator on the bar is

displayed around the playing point.

3 Release the button at the point you

want to watch.

3 Enter the number of the title or chapter

using the number buttons.

The scene at which you released the

button is displayed in pause mode.

To search for a scene again, move the

scene indicator using </, or m/

If you make a mistake, press CLEAR,

and re-enter another number.

4 Press ENTER.

After a while, the player starts playback

from the selected number.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Displaying the playing time and

play information

Adjusting pictures and sound

for videos

DVD

You can check the title information,

including the video transmission rate, etc.

To adjust the picture

Press OPTIONS during playback.

The options menu appears.

Press DISPLAY.

The displayed information differs depending

on the disc type and player status.

Select “A/V Settings” using M/m, and

press ENTER.

Select “Video Settings” using M/m, and

press ENTER.

Example: When playing a BD-ROM

The “Video Settings” screen appears.

Select an item using M/m, and press

ENTER.

A The current selected angle

The default settings are underlined.

B Title number or name

Items

Details

PictureQuality Optimises the picture

C The currently selected audio or subtitle

Mode

(Standard/

Brighter

settings for different

lighting environments.

setting

D Available functions (

audio/ subtitle)

angle/

Room/Theatre

Room)

E Playback information

FNR

(Off/Auto)

Reduces random noise

appearing in the picture.

Displays Disc type/Play mode/Video

codec/Bit rate/Playing status bar/

Playing time (Remaining time*)

BNR

(Off/Auto)

Reduces mosaic-like

block noise in the

picture.

F Output resolution/Video frequency

MNR

(Off/Auto)

Reduces minor noise

around the picture

outlines (mosquito

noise).

* Displayed when you press TIME repeatedly.

Select or adjust the settings using </M/

m/,, and press ENTER.

To adjust any other items, repeat steps 4

and 5.

• You can also check the playback information in

the front panel display (page 11).

• Press SUBTITLE, AUDIO, or ANGLE, and you

can check each type of information.

Download from Www.Somanuals.com. All Manuals Search And Download.

• Set the picture setting of your TV to ‘Standard’

before changing the “Picture Quality Mode”

settings.

• The “Audio Filter” function does not work for

digital audio signals output from the HDMI OUT/

DIGITAL OUT (OPTICAL/COAXIAL) jacks.

• There may be little effect by changing the “Audio

Filter” setting depending on the disc or playback

environment.

• “Video Settings” is not available when the

connected TV is set to Theatre Mode (page 16).

• Depending on the disc or the scene being played,

“FNR,” “BNR” or “MNR” effects may be hard to

discern.

To adjust the audio characteristics

Press OPTIONS during playback.

The options menu appears.

Select “A/V Settings” using M/m, and

press ENTER.

Select “Audio Settings” using M/m, and

press ENTER.

The “Audio Settings” screen appears.

Select an item using M/m, and press

ENTER.

The default settings are underlined.

Items

Details

AV SYNC

(short) 0 ~

120 msec

(long)

Adjusts the gap between

picture and sound, by

delaying the sound

output in relation to the

picture output (0 to

120 milliseconds).

Audio Filter

(for analogue

audio signals

only)

• Sharp: Provides a

wide frequency range

and spatial feeling.

Normally select this.

• Slow: Provides

smooth and warm

sound.

Select or adjust the settings using </M/

m/,, and press ENTER.

To adjust any other items, repeat steps 4

and 5.

Download from Www.Somanuals.com. All Manuals Search And Download.

Various music playback operations

Playing CDs

Buttons

Operations

Starts playback from the

point where you pressed x.

Stops playback.

Pauses playback.

1 ^{Insert a CD.}

The Music Player screen appears.

2 Press N.

./>

Skips to the beginning of the

current or next track. To go

to the previous track press

. twice.

Playback starts.

m/M

Fast reverse/fast forwards

when pressed during

playback.

TIME

Switches time information

on the screen and the front

panel display (page 11).

The point where you stopped playing (resume

point) is cleared from memory when:

– you open the disc tray, or

To select a track

Press HOME.

– you turn off the player.

Select

(Music) using </,.

Select , and press ENTER.

The music list appears.

Select a track using M/m.

To play the selected track, press N or

ENTER.

Available OPTIONS

Press OPTIONS.

The options menu appears.

Select an item using M/m, and press

ENTER.

The available items differ depending on

the situation.

Items

Details

Play

Plays the selected track.

Play from start Plays the current track

from the beginning.

Stop

Stops playing the track.

Download from Www.Somanuals.com. All Manuals Search And Download.

Available OPTIONS during playback

Playing Photo Files

Press OPTIONS during playback.

The options menu appears.

DATA DVD

DATA CD

Select an item using M/m, and press

ENTER.

The available items differ depending on

the situation.

BD-REs/BD-Rs containing JPEG image files

DVD+RWs/DVD+Rs/DVD-RWs/DVD-Rs

containing JPEG image files

CD-RWs/CD-Rs containing JPEG image files

Items

Details

Slideshow

Speed

Changes the slideshow

speed.

• Fast

• Normal

• Slow

1 Press HOME.

2 Select

(Photo) using </,.

Stop

Stops a slideshow.

Rotate Left

Rotates the photo

counterclockwise by 90

degrees.

Rotate Right

Rotates the photo

clockwise by 90

degrees.

3 Select , and press ENTER.

The file list or folder list appears.

Various photo playback operations

Buttons

Operations

Stops a slideshow.

RETURN

Pauses a slideshow.

./>

Displays the previous or

next photo.

DISPLAY

Displays the file

information.

4 Select a file or folder using M/m, and

press ENTER.

When you select a folder, select a file in

the folder using M/m, and press ENTER.

The selected photo file is displayed.

• To play a slideshow, press N.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

• When you attempt to play the following photo

files, the

mark appears on the screen and they

cannot be played.

– photo files larger than 8,192 pixels (width or

height)

– photo files smaller than 15 pixels (width or

height)

– photo files exceeding 32 MB

– photo files with extreme aspect ratios (greater

than 50:1 or 1:50)

– photo files in Progressive JPEG format

– photo files that have a “.jpeg” or “.jpg”

extension, but not in JPEG format

– photo files that have an extremely long name

• The following photo files cannot be played.

– photo files recorded on BD-Rs in any format

other than UDF (Universal Disk Format) 2.6

– photo files recorded on BD-REs in any format

other than UDF (Universal Disk Format) 2.5

• The following photo files or folders cannot be

displayed in the file list or folder list.

– photo files that have an extension other than

“.jpeg” or “.jpg”

– photo files that have an extremely long name

– photo files in the 5th tree or lower

– 501th or more folders when the total number of

folders and files in a single tree exceeds 500

• Photo files edited on a PC may not be played.

• Thumbnail images of some photo files may not be

displayed.

• Large photo files may take some time to display

or to start a slideshow.

To view best quality images

If you have a Sony TV compatible with

“PhotoTV HD,” you can enjoy best quality

images by the following connection and

setting.

Connect the player to the TV using an

HDMI cable (not supplied).

Set the TV’s video setting to [VIDEO-A]

mode.

For details on [VIDEO-A], refer to the

operating instructions supplied with the

TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Settings

Displays

Select

(Setup) on the home menu when

you need to change the settings of the player.

1 Press HOME.

2 Select

(Setup) using </,.

3 Select the setup category icon to

change using M/m, and press ENTER.

For details on setting options and setup

category icons, see “Setting list”

(page 40).

Example: Video Settings

Settings and

Adjustments

4 Set the options.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting list

You can setup the following options.

Network Update

Icon

Explanation

You can update and improve the functions of

the player.

For information about update functions, refer

to the following website;

Network Update (page 40)

Updates the software of the

player.

Video Settings (page 41)

Makes the video settings

according to the type of

connecting jacks.

http://www.sony.net/

1 Select “Network Update” using M/m,

and press ENTER.

Audio Settings (page 44)

Makes the audio settings

according to the type of

connecting jacks.

The player connects to the network, and

the display asks for confirmation.

2 Select “OK” using </,, and press

BD/DVD Viewing Settings

(page 47)

Makes detailed settings for BD/

DVD playback.

ENTER.

The player starts downloading, then

updating the software automatically.

When updating finishes, “FINISH”

appears for 5 seconds in the front panel

display, then the player automatically

turns off.

Photo Settings (page 49)

Makes the photo-related settings.

System Settings (page 50)

Makes the player-related

settings.

3 Press [/1 to turn on the player.

The player starts up with the updated

software.

Network Settings (page 51)

Makes detailed settings for

Internet and network.

Easy Setup (page 53)

Re-runs the Easy Setup to make

the basic settings.

• The “VUP */9” counter (“*” indicates update

step) in the front panel display also shows

progress of the update.

• You can check the current software version by

selecting “System Information” in the “System

Settings” setup (page 50).

• The “Setup” settings remain after updating.

• The player informs you of newer software version

information when “Software Update

Notification” is set to “On” (default) (page 50).

Resetting (page 53)

Resets the player to the factory

settings.

• Do not disconnect the mains lead or network

cable while downloading or updating software.

• Any operations, including opening the disc tray,

are not available while updating.

• Downloading times may differ depending on the

server provider or line status.

• When error messages on network connections

appear, check the network connections using

“Network Diagnostic” of “Internet Settings” in

the “Network Settings” setup (page 51).

Download from Www.Somanuals.com. All Manuals Search And Download.

To update the software using an update

disc

You can update and improve the functions of

the player using an update disc provided by

Sony dealer or local authorised Sony service

facility.

Video Settings

The default settings are underlined.

Insert the update disc.

The display asks for confirmation.

TV Type

Selects your TV type.

Select “OK,” and press ENTER.

Software update starts.

When updating finishes, “FINISH”

appears for 5 seconds in the front panel

display, then the disc tray automatically

opens.

16:9

4:3

Select this when connecting

to a wide-screen TV or a TV

with a wide mode function.

Select this when connecting

to a 4:3 screen TV without a

wide mode function.

Remove the disc.

The player automatically turns off.

Press [/1 to turn the player on.

The player starts up with the updated

software.

Screen Format

Selects the display configuration for a 4:3

screen picture on a 16:9 wide screen TV.

Original

Select this when connecting

to a TV with a wide mode

function. Displays a 4:3

screen picture in 16:9 aspect

ratio even on a wide-screen

TV.

• The “VUP */9” counter (“*” indicates update

step) in the front panel display also shows

progress of the update.

• You can check the current software version by

selecting “System Information” in the “System

Settings” setup (page 50).

• The “Setup” settings remain after updating.

• For information about other software update

methods, refer to the following website or consult

your nearest Sony dealer or local authorised Sony

Service facility;

Fixed Aspect Changes the picture size to

Ratio

fit the screen size with the

original picture aspect ratio.

http://www.sony.net/

• Do not disconnect the mains lead while updating.

• Any operations, including opening the disc tray,

are not available while updating.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Aspect Ratio

Output Video Format

Selects the display configuration for

playback of 16:9 screen pictures on a 4:3

screen TV (selectable when “TV Type” is set

to “4:3” and “Screen Format” is set to “Fixed

Aspect Ratio”).

Selects the jack type to output video signals

(“TV Connection Method”) and output

resolution(“HDMIResolution”/“Component

Resolution”).

Select “Output Video Format” in “Video

Settings,” and press ENTER.

Letter Box

Displays a wide picture with

black bands on the top and

bottom.

Select the jack type to output video

signals using M/m, and press ENTER.

Pan & Scan

Displays a full-height

picture on the entire screen,

with trimmed sides.

When connecting the HDMI OUT jack and

other video output jacks at the same time,

select “Component Video.”

Letter Box

TV Connection Method

HDMI

Outputs signals from

the HDMI OUT jack

according to the “HDMI

Resolution” setting

below.

Pan & Scan

Component

Video

Outputs signals from

the COMPONENT

VIDEO OUT jacks

according to the

“Component

Cinema Conversion Mode

Resolution” setting

below.

Sets the video conversion method for 480p/

576p, 720p, 1080i, or 1080p* signals from

the HDMI OUT jack or the COMPONENT

VIDEO OUT jacks.

Video or

S Video

Outputs signals from

the LINE OUT VIDEO

or S VIDEO jack.

* HDMI only

(When you select “HDMI” or

“Component Video” only)

Auto

Normally select this. The

player automatically detects

whether the material is

video-based or film-based,

and switches to the

Select the signal type for the HDMI OUT

jack or COMPONENT VIDEO OUT

jacks using M/m, and press ENTER.

When you change the video output

resolution, a picture is displayed in the

selected resolution for about 30 seconds,

then the display asks for confirmation.

Follow the on-screen instructions.

appropriate conversion

method.

Video

The conversion method

suited for video-based

material will always be

selected regardless of the

material.

The HD indicator lights up when

outputting 720p/1080i/1080p video

signals.

Download from Www.Somanuals.com. All Manuals Search And Download.

• If the picture is distorted or no picture

appears, wait for about 30 seconds without

pressing any buttons. The display returns to

the resolution setting screen.

BD-ROM 1080/24p Output

Sets to output 1920 × 1080p/24 Hz video

signals when playing film-based materials on

BD-ROMs (720p/24 Hz or 1080p/24 Hz).

1920 × 1080p/24 Hz video signals can be

output when all of the following conditions

are met.

– You connect a 1080/24p-compatible TV

using the HDMI OUT jack,

– “Output Video Format” is set to “HDMI,”

and

If the selected video output resolution is

incorrect, no picture appears on the screen

when you press any button in 30 seconds. In

this case, press x on the player for more than

10 seconds to reset the video output

resolution to the lowest resolution.

• When connecting the HDMI OUT jack and

other video output jacks at the same time,

video signals may not output from the jacks,

other than from the HDMI OUT jack, when

“Auto” or “1080p” is selected.

– “HDMI Resolution” is set to “Auto” or

“1080p.”

The 24P indicator lights up when outputting

1920 × 1080p/24 Hz video signals.

When connecting other equipment at the

same time, press RETURN to return to step

2 and change the “TV Connection Method”

setting.

Auto

Outputs 1920 × 1080p/

24 Hz video signals only

when connecting a 1080/

24p-compatible TV using

the HDMI OUT jack.

HDMI Resolution/Component Resolution

Auto (HDMI

only)

Normally select this.

The player outputs

signals starting from the

highest resolution

acceptable to the TV:

1080p > 1080i > 720p >

480p > 480i

If the resulting image

format is undesirable,

try another setting that

suits your TV.

Off

Outputs 1920 × 1080p/

24 Hz video signals

regardless of the connected

TV type.

Select this when your TV is

not compatible with 1080/

24p video signals.

480i/576i

480p/576p

720p

Outputs480i/576ivideo

signals.

No BD-ROM picture appears when the connected

TV is non-compatible with 1080/24p and “BD-

ROM 1080/24p Output” is set to “On.” In this case,

press HOME to display the home menu, and change

the “BD-ROM 1080/24p Output” setting.

Outputs 480p/576p

video signals.

Outputs 720p video

signals.

1080i

Outputs 1080i video

signals.

1080p (HDMI Outputs 1080p video

only) signals.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

YCbCr/RGB (HDMI)

Audio Settings

Sets the colour setting for video signals

output from the HDMI OUT jack. Select the

setting that matches the connected TV type.

The default settings are underlined.

Auto

Automatically detects the

type of external device, and

switches to the matching

colour setting.

Audio Output Priority

Selects the jack type to output audio signals.

2-channel linear PCM signals are output at

48 kHz maximum from output jacks other

than the priority jacks.

YCbCr (4:2:2) Outputs YCbCr 4:2:2 video

signals.

YCbCr (4:4:4) Outputs YCbCr 4:4:4 video

HDMI

Outputs audio signals from

the HDMI OUT jack.

signals.

RGB (16-235) Select this when connecting

to a device with an HDCP-

Coaxial/

Optical

Outputs audio signals from

the DIGITAL OUT

(OPTICAL/COAXIAL)

jack.

compliant DVI jack.

RGB (0-255) Select this when connecting

to an RGB (0-255) device.

Stereo

Analogue

Outputs audio signals from

the LINE OUT (R-AUDIO-

L) jacks.

x.v.Colour Output

Sets whether to send xvYCC information to

the connected TV.

Audio (HDMI)

Combining xvYCC-compatible video with a

TV that supports x.v.Colour display makes it

possible to more accurately reproduce object

colours present in the natural world.

Selects the signal type for the HDMI OUT

jack.

Auto

Normally select this.

Outputs audio signals

Auto

Off

Normally select this.

according to the status of the

connected HDMI device.

Select this when the picture

is unstable or colours appear

unnatural.

2ch PCM

Downmixes to 2-channel

Linear PCM signals before

outputting from the HDMI

OUT jack.

Pause Mode

Select “2ch PCM” when connecting a TV or an AV

amplifier (receiver) that does not support Dolby

Digital or DTS, otherwise noise or no sound may

result.

Sets the picture mode for DVD playback

pause status. For BD-ROMs or discs

containing AVCHD files, “Pause Mode”

automatically switches to “Auto.”

Auto

Normally select this.

Dynamic moving pictures

appear without blurring.

Frame

Displays static pictures at

high resolution.

Download from Www.Somanuals.com. All Manuals Search And Download.

BD Audio Setting

DTS

Selects whether to mix or not mix interactive

audio and secondary audio (commentary)

when playing a BD that contains such audio.

Selects the audio signals output when playing

DTS discs. This setting affects the output

from the DIGITAL OUT (COAXIAL/

OPTICAL) jack.

Mix

Outputs the audio obtained

by mixing the interactive

audio and secondary audio

to the primary audio.

Downmix

PCM

Converts to output Linear

PCM signals. Select this

when connecting to an audio

device without a built-in

DTS decoder.

Direct

Outputs the primary audio

only.

DTS

Select this when connecting

to an audio device with a

built-in DTS decoder.

Audio ATT

Lowers the audio output level to prevent

sound distortion.

48kHz/96kHz PCM

Off

Enables Audio Attenuation.

Disables Audio Attenuation.

Selects the maximum sampling frequency for

the PCM signals output from the DIGITAL

OUT (OPTICAL/COAXIAL) jack.

48kHz/16bit

Outputs audio signals of

96 kHz sampling as 48 kHz/

16 bit.

“Audio ATT” does not affect the output from the

HDMI OUT jack and the DIGITAL OUT

(OPTICAL/COAXIAL) jack.

96kHz/24bit

Outputs audio signals of

96 kHz sampling as 96 kHz/

24 bit. However, the signals

will be output as 48 kHz/

16 bit if the source is copy-

protected.

Dolby Digital

Selects the audio signals output when playing

Dolby Digital discs.

This setting affects the output from the

DIGITAL OUT (COAXIAL/OPTICAL)

jack.

• If you select “96kHz/24bit” when an AV

amplifier (receiver) that does not support 96 kHz

is connected, no sound or a loud sound may

result.

Downmix

PCM

Converts to output Linear

PCM signals. Select this

when connecting an audio

device without a built-in

Dolby Digital decoder.

• “48kHz/96kHz PCM” is not effective when

“Audio Output Priority” is set to “HDMI” or

“Stereo Analogue.”

Dolby Digital

Select this when connecting

an audio device with a built-

in Dolby Digital decoder.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio DRC

Downmix

Selects the dynamic range (compression level

of the sound) setting when playing a BD or

DVD that conforms to “Audio DRC.”

Sets the downmix method of multi-channel to

two-channel sound.

Dolby

Surround

Outputs the Dolby Surround

(Pro Logic) signals in 2

channels. Select this when

connecting an audio device

that supports Dolby

Auto

Performs playback at the

dynamic range specified by

the disc (BD-ROM only).

Other discs are played back

at the “Standard” level.

Surround (Pro Logic).

Normal

Outputs audio signals

without Dolby Surround

(Pro Logic) effect. Select

this when connecting an

audio device that does not

support Dolby Surround

(Pro Logic).

Standard

Performs playback at a

compression level between

“TV Mode” and “Wide

Range.”

TV Mode

Sounds are compressed

heavily. Low sounds are

easier to hear.

Wide Range

No compression works. A

more dynamic sound is

produced.

“Downmix” has no effect on the bitstream audio

output from the DIGITAL OUT (OPTICAL/

COAXIAL)/HDMI OUT jack.

• “Audio DRC” is effective only when playing

Dolby Digital, Dolby Digital Plus, and Dolby

TrueHD audio signals.

• When “Dolby Digital” is set to “Dolby Digital” in

the “Audio Settings” setup (page 45), “Audio

DRC” has no effect on the audio output from the

DIGITAL OUT (OPTICAL/COAXIAL) jack.

However, this excludes the following cases.

– when “BD Audio Setting” is set to “Mix” when

playing a BD.

– when “Audio Output Priority” is set to “HDMI”

or “Stereo Analogue.”

Download from Www.Somanuals.com. All Manuals Search And Download.

BD Parental Control

BD/DVD Viewing

Settings

Playback of some BD-ROMs can be limited

according to the age of the users. Scenes may

be blocked or replaced with different scenes.

The default settings are underlined.

1 Select “BD Parental Control” in “BD/

DVD Viewing Settings,” and press

ENTER.

BD/DVD Menu

Selects the default menu language for BD-

ROMs or DVD VIDEOs.

When you select “Select Language Code,”

the display for entering the language code

appears. Enter the code for your language by

referring to “Language Code List” (page 65).

2 Enter your four-digit password using

the number buttons.

3 Select “OK,” and press ENTER.

4 Select the age restriction, and press

ENTER.

The lower the value, the stricter the

limitation.

If you select “Select Age Restriction,”

you can enter the age from “0” to “255”

using </M/m/, or the number

buttons.

Audio

Selects the default track language for BD-

ROMs or DVD VIDEOs.

When you select “Original,” the language

given priority in the disc is selected.

When you select “Select Language Code,”

the display for entering the language code

appears. Enter the code for your language by

referring to “Language Code List” (page 65).

• To cancel the Parental Control setting,

select “No Restrictions.”

You can change the password (see “Password” on

page 49).

Subtitle

• If you forget the password, reset the player

(page 53) and set a new password (see

“Password” on page 49).

Selects the default subtitle language for BD-

ROMs or DVD VIDEOs.

When you select “Select Language Code,”

the display for entering the language code

appears. Enter the code for your language by

referring to “Language Code List” (page 65).

• When you play discs which do not have the

Parental Control function, playback cannot be

limited on this player.

• Depending on the disc, you may be asked to

change the Parental Control level while playing

the disc. In this case, enter your password, then

change the level.

• When “255” is selected in “Select Age

Restriction,” the Parental Control setting is

cancelled.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Parental Control

Parental Control Region Code

Playback of some DVD VIDEOs can be

limited according to the age of the users.

Scenes may be blocked or replaced with

different scenes.

Playback of some BD-ROMs or DVD

VIDEOs can be limited according to the

geographic area. Scenes may be blocked or

replaced with different scenes.

1 Select “DVD Parental Control” in “BD/ 1 Select “Parental Control Region

DVD Viewing Settings,” and press

ENTER.

Code” in “BD/DVD Viewing Settings,”

and press ENTER.

2 Enter your four-digit password using

the number buttons.

2 Enter your four-digit password using

the number buttons.

3 Select “OK,” and press ENTER.

4 Select a level, and press ENTER.

The lower the value, the stricter the

limitation.

4 Select the area restriction, and press

ENTER.

When you select “Select Region Code,”

the display for entering the region code

appears. Enter the code for the area

restriction by referring to “Parental

Control/Area Code” (page 65).

• To cancel the Parental Control setting,

select “No Restrictions.”

You can change the password (see “Password” on

page 49).

You can change the password (see “Password” on

page 49).

• If you forget the password, reset the player

(page 53) and set a new password (see

“Password” on page 49).

• If you forget the password, reset the player

(page 53) and set a new password (see

“Password” on page 49).

• When you play discs which do not have the

Parental Control function, playback cannot be

limited on this player.

• Depending on the disc, you may be asked to

change the Parental Control level while playing

the disc. In this case, enter your password, then

change the level.

• When you play discs which do not have the

Parental Control function, playback cannot be

limited on this player.

• Depending on the disc, you may be asked to

change the Parental Control level while playing

the disc. In this case, enter your password, then

change the level.

Download from Www.Somanuals.com. All Manuals Search And Download.

Password

Photo Settings

Sets or changes the password for the Parental

Control function. A password allows you to

set a restriction on BD-ROM or DVD

VIDEO playback. If necessary, you can

differentiate the restriction levels for BD-

ROMs and DVD VIDEOs.

The default setting is underlined.

Slideshow Speed

Changes the slideshow speed.

1 Select “Password” in “BD/DVD

Viewing Settings,” and press ENTER.

Fast

Photos change rapidly.

Normal

Photos change at normal

speed.

2 Enter your four-digit password using

the number buttons.

Slow

Photos change slowly.

3 Select “OK,” and press ENTER.

To change the password

After step 3, enter a new password using

the number buttons.

Select “OK,” and press ENTER.

Hybrid Disc Playback Layer

Selects the layer priority when playing a

Hybrid Disc. To change the setting, turn the

player off and on again.

Plays BD layer.

DVD/CD

Plays DVD or CD layer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Auto Display

System Settings

Automatically displays

information on the screen

when changing the viewing

titles, picture modes, audio

signals, etc.

The default settings are underlined.

OSD

Off

Displays information only

when you press DISPLAY.

Selects your language for the player on-

screen displays.

Screen Saver

Dimmer

The screen saver image appears when you do

not use the player for more than 15 minutes

while an on-screen display, such as the home

menu, is displayed on your TV screen. The

screen saver image helps prevent your

display device from becoming damaged

(ghosting).

Adjusts the lighting of the front panel display.

Bright

Dark

Off

Bright lighting.

Low lighting.

Turns off the lighting during

playback. Low lighting other

than during playback.

Turns on the screen saver

function.

Control for HDMI

Off

Turns off the function.

Allows you to use the

“Control for HDMI”

function (page 16).

Software Update Notification

Informs you of newer software version

information. Network connections and

settings are required when using this function

(page 51).

Off

Turns off the function.

Standby Mode

Sets the player to inform you

of newer software version

information (page 40).

Quick Start

Shortens the startup time

from standby mode. You can

operate the player quickly

after turning it on.

Off

Turns off the function.

Normal

The default setting.

System Information

When “Standby Mode” is set to “Quick Start,”

– power consumption will be higher than when

“Standby Mode” is set to “Normal” and

– the ventilation fan may turn on depending on the

surrounding temperature.

Displays the player’s software version

information and the MAC address.

Download from Www.Somanuals.com. All Manuals Search And Download.

When you set the “DNS Server (Primary)”/

“DNS Server (Secondary)” addresses

manually, enter the “DNS Server (Primary)”

address. Otherwise, the “Internet Settings”

will be set incorrectly.

Network Settings

Internet Settings

4 If your ISP has a specific proxy server

setting, select “Proxy Settings” using

M/m, and press ENTER.

These items are necessary when you connect

to the Internet via a network cable. Enter the

respective (alphanumeric) values for your

broadband router or Wireless LAN router.

The items that need to be set may differ,

depending on the Internet service provider or

the router. For details, refer to the instruction

manuals that have been provided by your

Internet service provider or supplied with the

router.

The “Proxy Settings” display appears.

If the proxy server does not have a

specific setting, go to step 8.

5 Set “Use of Proxy Server” to “On.”

6 Select “Proxy Server” and “Port,” and

enter the settings.

To enter the proxy server, see “To enter

characters” (page 52).

1 Select“Internet Settings” in “Network

Settings,” and press ENTER.

7 Press RETURN.

2 Select “IP Address Acquisition,” and

press ENTER.

8 Select “Network Diagnostic” using M/

m, and press ENTER.

3 Select an item, and press ENTER.

9 Select “Start,” and press ENTER.

Use DHCP

Select this when DHCP

(Dynamic Host

10 Check that the message “Network

connections are correct.” appears.

The setup is finished. If the message does

not appear, follow the on-screen

messages.

Configuration Protocol)

server settings are

available from your

Internet service

provider. The network

settings necessary for

the player will be

assigned automatically.

Use Static IP Set the IP address

Address

manually according to

your network

environment.

• When you select “Use DHCP”

If you set “DNS Server Auto

Acquisition” to “Off,” set the following

item:

– DNS Server (Primary)/DNS Server

(Secondary)

• When you select “Use Static IP

Address”

Set the following items:

– IP Address

– Subnet Mask

– Default Gateway

– DNS Server (Primary)/DNS Server

(Secondary)

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Available buttons

To enter characters

The display for entering characters appears

when you select “Proxy Server” in “Proxy

Settings.”

Buttons

Details

Red button

(Letter Type)

Switches the keyboard

between alphabet and

numbers.

Green button

(A/a)

Switches the keyboard

between upper case and

lower case.

Yellow button

(Symbol)

Displays the keyboard for

symbols.

Blue button

(Finish)

The input is entered, and

the player returns to the

previous display.

Press a number button repeatedly to

select a character.

Example:

Press the number 3 button once to enter

“D.”

Press the number 3 button three times to

enter “F.”

CLEAR

Erases the selected

(Clear/Clear All) character.

To erase all displayed

characters, press and hold

CLEAR for 2 seconds or

more.

Press ,, and enter the next character.

RETURN

(Cancel)

Returns to the previous

display, cancelling the

input.

Press the blue button (“Finish”) to finish.

</M/m/,,

ENTER

• Select an input function

using </M/m/,, and

press ENTER.

• Enter characters as

follows: 1Select a

character selection panel

using </M/m/,, and

press ENTER. 2Selecta

character using </,,

and press ENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

Easy Setup

Resetting

Re-runs the Easy Setup to make the basic

settings.

You can reset the player settings to the

factory default by selecting the group of

settings. All the settings within the group will

be reset.

1 Select “Easy Setup,” and press

ENTER.

1 Select “Resetting,” and press ENTER.

2 Select “Start” using </,, and

2 Select “Reset to Factory Default

press ENTER.

Settings,” and press ENTER.

3 Follow the instructions for “Step 7:

Easy Setup” (page 27) from step 4.

3 Select the settings you want to reset to

default, and press ENTER.

The display asks for confirmation.

You can reset the following settings:

– Video Settings

– Audio Settings

– BD/DVD Viewing Settings

– Photo Settings

– System Settings

– Network Settings

– All Settings

4 Select “Start” using </,, and

press ENTER.

When “All Settings” is selected in step 3, the Blu-

ray Disc indicator lights up, then turns off when

Easy Setup is complete.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

If you experience any of the following

difficulties while using the player, use this

troubleshooting guide to help remedy the

problem before requesting repairs. Should

any problem persist, consult your nearest

Sony dealer.

Power

The power does not turn on.

, Check that the mains lead is connected

securely.

, It takes a short while before the player turns

on.

The message “A new software version has

been found on the network.” appears on

the screen when turning the player on.

, See “Network Update” (page 40) to update

the player to a newer software version.

Additional

Information

Disc

The disc does not play.

, The disc is dirty.

, The disc is upside down. Insert the disc with

the playback side facing down.

, The disc is skewed.

, You are attempting to play a disc with a

format that cannot be played back by this

player (page 60).

, The region code on the BD or DVD does

not match the player.

, The player cannot play a recorded disc that

is not correctly finalised (page 60).

Picture

See also “Connecting to an HDMI jack”

(page 15) when connecting equipment using

the HDMI cable.

There is no picture/picture noise appears.

, Check that all the connecting cables are

securely connected.

, Check whether the connecting cables are

damaged.

Download from Www.Somanuals.com. All Manuals Search And Download.

, Check the connection to your TV (page 14)

and switch the input selector on your TV so

that the signal from the player appears on

the TV screen.

, When playing a double-layer DVD, the

video and audio may be momentarily

interrupted at the point where the layers

switch.

Sound

See also “Connecting to an HDMI jack”

(page 20) when connecting equipment using

the HDMI cable.

There is no sound.

, Check that all the connecting cables are

securely connected.

, Check whether the connecting cables are

damaged.

No picture appears when the video output

resolution selected in “Output Video

Format” is incorrect.

, Press x on the player for more than 10

seconds to reset the video output resolution

to the lowest resolution.

, Check the connection to your AV amplifier

(receiver) (page 19) and switch the input

selector on your AV amplifier (receiver) so

that the audio signals of the player are

output from your AV amplifier (receiver).

, The player is in scan mode.

, If the audio signal does not come through

the DIGITAL OUT (OPTICAL/

COAXIAL)/HDMI OUT jack, check the

audio settings (page 44).

The picture does not fill the screen, even

though the aspect ratio is set in “DVD

Aspect Ratio” under “Video Settings.”

, The aspect ratio of the disc is fixed on your

DVD (page 42).

Video signals are not output from the

jacks, other than from the HDMI OUT jack,

when connecting the HDMI OUT jack and

other video output jacks at the same time.

, Set “Output Video Format” to “Component

Video” in the “Video Settings” setup

(page 42).

The sound is not output correctly.

, Check the “Audio Output Priority” setting

in the “Audio Settings” setup (page 44).

The sound volume is low.

, The sound volume is low on some BDs or

DVDs.

, Try setting “Audio DRC” to “TV Mode” in

the “Audio Settings” setup (page 46).

, Set “Audio ATT” to “Off” in the “Audio

Settings” setup (page 45).

The dark area of the picture is too dark/the

bright area is too bright or unnatural.

, Set “Picture Quality Mode” to “Standard”

(default) (see “Adjusting pictures and

sound for videos” on page 34).

The HD Audio (Dolby Digital Plus, Dolby

TrueHD, DTS-HD High Resolution Audio,

and DTS-HD Master Audio) is not output

by bitstream.

, Set “BD Audio Setting” to “Direct” in the

“Audio Settings” setup (page 45).

, Check that the connected AV amplifier

(receiver) is compatible with each HD

Audio format.

The picture is not output correctly.

, Check the “Output Video Format” settings

in the “Video Settings” setup (page 42).

No BD-ROM picture appears.

, Check the “BD-ROM 1080/24p Output”

setting in the “Video Settings” setup

(page 43).

The interactive audio is not output.

, Set “BD Audio Setting” to “Mix” in the

“Audio Settings” setup (page 45).

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

, Make sure that the connected component is

compatible with the “Control for HDMI”

function. For details, refer to the operating

instructions supplied with the component.

, Check the connected component’s setting

for the “Control for HDMI” function. For

details, refer to the operating instructions

supplied with the component.

HDMI

There is no picture or no sound when

connected to the HDMI OUT jack.

, Try the following: 1Turn the player off

and on again. 2Turn the connected

equipment off and on again. 3Disconnect

and then reconnect the HDMI cable.

, If you change the HDMI connection, turn

the player off and on again.

, If power failure occurs, set “Control for

HDMI” to “Off,” then set “Control for

HDMI” to “On” (page 50).

, For details on the “Control for HDMI”

function, see “About the BRAVIA Sync

features (for HDMI connections only)”

(page 16).

There is no picture or picture noise

appears when connected to the HDMI OUT

jack.

, The HDMI OUT jack is connected to a DVI

device that does not support copyright

protection technology.

, If the HDMI OUT jack is used for video

output, changing the video output

resolution may solve the problem

(page 42).

, If you connect the player to a TV through an

AV amplifier (receiver) that is not

compatible with the “Control for HDMI”

function, you may be unable to control the

TV from the player.

No sound is output from the HDMI OUT

jack.

, The HDMI OUT jack is connected to a DVI

device (DVI jacks do not accept audio

signals).

External memory (local

storage)

The external memory is not recognised.

, Try the following: 1Turn the player off.

2Align the V mark of the EXT slot with

the V mark on the external memory, and

insert the external memory (page 23).

3Turn the player on. 4Check that the

EXT indicator lights up in the front panel

display.

The sound is not output correctly when

connected to the HDMI OUT jack.

, The device connected to the HDMI OUT

jack does not support the audio format of

the player. Check the audio settings

(page 44).

The display language on the screen

switches automatically when connected to

the HDMI OUT jack.

, When “Control for HDMI” is set to “On”

(page 50), the display language on the

screen automatically switches according to

the language setting of the connected TV (if

you change the setting on your TV, etc.).

Bonus contents or other data that are

contained in a BD-ROM cannot be played.

, Try the following: 1Remove the disc.

2Turn the player off. 3Remove and re-

insert the external memory (page 23).

4Turn the player on. 5Check that the

EXT indicator lights up in the front panel

display. 6Insert the BD-ROM with

BonusView.

The “Control for HDMI” function does not

work (BRAVIA Sync).

, Check that the mains lead of the connected

component is securely connected.

, If the HDMI indicator does not appear in

the front panel display, check the HDMI

connection (page 15 , 20).

A message indicating that the local

storage does not have enough space

appears on the screen.

, Delete unnecessary data in the external

memory (page 33).

, Set “Control for HDMI” to “On” (page 50).

Download from Www.Somanuals.com. All Manuals Search And Download.

The disc tray does not open and you

cannot remove the disc even after you

press A.

, Try the following: 1Turn the player off,

and disconnect the mains lead.

Operation

The remote does not function.

, The batteries in the remote are weak

(page 26).

2Reconnect the mains lead while pressing

down A on the player. 3Keep pressing

down A on the player until the tray opens.

4Remove the disc. 5When “WAIT”

appears in the front panel display, hold

down [/1 on the player for more than 10

seconds until the player turns on again.

, The distance between the remote and the

player is too far.

, The remote is not pointed at the remote

sensor on the player.

The file name is not correctly displayed.

, The player can only display ISO 8859-1-

compliant character formats. Other

character formats may be displayed

differently.

, Depending on the writing software used,

the input characters may be displayed

differently.

The player does not respond to any button.

, Moisture has condensed inside the player

(page 3).

, Hold down [/1 on the player for more than

10 seconds until the indicators in the front

panel display turn off.

If the player still does not respond to any

button, disconnect then reconnect the mains

lead.

The disc does not start playing from the

beginning.

, Resume Play is on (page 31).

Some functions such as Stop or Search

cannot be performed.

, Depending on the disc, you may not be able

to do some of the operations above. Refer to

the operating manual supplied with the disc.

The language for the soundtrack/subtitle

or angles cannot be changed.

, Try using the BD’s or DVD’s menu instead

of the direct selection button on the remote

(page 32).

, Multi-lingual tracks/subtitles or multi-

angles are not recorded on the BD or DVD

being played.

, The BD or DVD prohibits the changing of

the language for the sound track/subtitle or

angles.

The disc tray does not open and

“LOCKED” or “TLK ON” appears in the

front panel display.

, When “LOCKED” appears, the player is

locked. To cancel the Child Lock, hold

down X on the player until “UNLOCK”

appears in the front panel display (page 10).

, When “TLK ON” appears, contact your

Sony dealer or local authorized Sony

service facility.

Download from Www.Somanuals.com. All Manuals Search And Download.

Self-Diagnosis Function

When the self-diagnosis function is activated

to prevent the player from malfunctioning, an

error code appears in the front panel display,

or just

appears without any messages on

the entire screen.

In these cases, check the following.

When an error code appears in the front

panel display

Error code Corrective action

Exxxx

SYS ERR

Contact your nearest Sony

dealer or local authorised Sony

service facility and give the

error code.

FAN ERR

• Check that the ventilation

holes on the rear of the player

are not blocked.

• Place the player in a location

with adequate ventilation to

prevent heat build-up in the

player.

When just

appears without any

messages on the entire screen

Contact your nearest Sony dealer or local

authorised Sony service facility.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playable Discs

Icon used in

this manual

Type

Disc Logo

Characteristics

BD-ROMs and BD-REs/BD-Rs in

BDMV and BDAV mode, including

8 cm discs (single layer) and DL discs

Blu-ray Disc

Discs such as movies that can be

purchased or rented

DVD VIDEO

DVD

DVD+RWs/DVD+Rs in +VR mode or

DVD-RWs/DVD-Rs in video and VR

mode, including 8 cm discs (single

layer) and DVD+R DL/DVD-R DL

discs

DVD

DVD+RWs/DVD+Rs/DVD-RWs/

DVD-Rs containing JPEG* image files

DATA DVD

Music CDs or CD-Rs/CD-RWs in music

CD format

CD-Rs/CD-RWs containing JPEG*

image files

DATA CD

—

DATA CD

* JPEG format conforming to UDF (Universal Disk

Format).

Notes about BD-ROM compatibility

Since the Blu-ray Disc specifications are new

and evolving, some discs may not be playable

depending on the disc type and the version.

The audio output differs depending on the

source, connected output jack, and selected

audio settings. For details, see page 63.

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

Discs that cannot be played

• BDs with cartridge

• Notes about BD-REs/BD-Rs, DVD+RWs/

DVD+Rs, DVD-RWs/DVD-Rs, or CD-Rs/

CD-RWs

Some BD-REs/BD-Rs, DVD+RWs/DVD+Rs,

DVD-RWs/DVD-Rs, or CD-Rs/CD-RWs cannot

be played on this player due to the recording

quality or physical condition of the disc, or the

characteristics of the recording device and

authoring software.

A DVD disc will not play if it has not been

correctly finalised. For more information, refer to

the operating instructions supplied with the

recording device. Note that some playback

functions may not work with some DVD+RWs/

DVD+Rs, even if they have been correctly

finalised. In this case, view the disc using normal

playback.

• DVD-RAMs

• HD DVDs

• DVD Audio discs

• PHOTO CDs

• Data part of CD-Extras

• VCDs/Super VCDs

• HD layer on Super Audio CDs

• BD-ROMs/DVD VIDEOs with a different

region code (page 60).

Note on playback operations of BDs/DVDs

Some playback operations of BDs/DVDs

may be intentionally set by software

producers. Since this player plays BDs/

DVDs according to the disc contents the

software producers designed, some playback

features may not be available. Refer to the

instructions supplied with the BDs/DVDs.

• Music discs encoded with copyright

protection technologies

This product is designed to play back discs that

conform to the Compact Disc (CD) standard.

Various music discs encoded with copyright

protection technologies are being marketed by

some record companies. Please be aware that

among those discs, there are some that do not

conform to the CD standard and may not be

playable by this product.

Region code (BD-ROM/DVD VIDEO only)

Your player has a region code printed on the

rear of the unit and will only play BD-ROMs/

DVD VIDEOs (playback only) labelled with

identical region codes. This system is used to

protect copyrights.

DVD VIDEOs labelled

on this player.

Depending on the BD-ROM/DVD VIDEO,

no region code may be indicated even though

playing the BD-ROM/DVD VIDEO is

prohibited by area restrictions.

• Note on DualDiscs

A DualDisc is a two sided disc product which

mates DVD recorded material on one side with

digital audio material on the other side.

However, since the audio material side does not

conform to the Compact Disc (CD) standard,

playback on this product is not guaranteed.

• Note about double-layer DVDs

The playback pictures and sound may be

momentarily interrupted when the layers switch.

• Note about 8 cm BD-REs/8 cm BD-Rs

Some 8 cm BD-REs/8 cm BD-Rs cannot be

played on this player.

will also play

ALL

Region code

• Note about BD-REs/BD-Rs

This player supports Ver. 2.1 BD-RE and Ver. 1.1

and 1.2 BD-R including organic pigment type

BD-R (LTH type).

• Note about DTS 5.1 MUSIC DISCs

This player can play DTS 5.1 MUSIC DISCs.

Audio signals are output in the formats specified

under the “Audio Output Signals” table on page

63.

Download from Www.Somanuals.com. All Manuals Search And Download.

About playback of discs recorded in

AVCHD format

This player can play AVCHD format discs.

What is the AVCHD format?

The AVCHD format is a high-definition digital

video camera format used to record SD (standard

definition) or HD (high definition) signals of either

the 1080i specification or the 720p

specification on DVDs, using efficient data

compression coding technology. The MPEG-4

AVC/H.264 format is adopted to compress video

data, and the Dolby Digital or Linear PCM system

is used to compress audio data. The MPEG-4 AVC/

H.264 format is capable of compressing images at

higher efficiency than that of the conventional

image compressing format. The MPEG-4 AVC/

H.264 format enables a high definition (HD) video

signal shot on a digital video camera recorder to be

recorded on DVD discs, in the same way as it would

be for a standard definition (SD) television signal.

A high-definition specification which utilizes

1080 effective scanning lines and the interlace

system.

A high-definition specification which utilizes

720 effective scanning lines and the progressive

system.

• Some AVCHD format discs may not play,

depending on the recording condition.

• The AVCHD format disc will not play if it has not

been correctly finalised.

Download from Www.Somanuals.com. All Manuals Search And Download.

Video Output Resolution

Output resolution differs depending on the “Output Video Format” setting in the “Video

Settings” setup (page 41).

When “Output Video Format” is set to

“HDMI”

When “Output Video Format” is set to

“Component Video”

Resolution

setting

LINE OUT

VIDEO/

S VIDEO

jack

COMPONENT HDMI OUT

VIDEO/

S VIDEO

jack

COMPONENT HDMI OUT

VIDEO jack

jack

VIDEO jack

jack

480i/576i

480p/576p

720p

480i/576i

no picture

480i/576i

no picture

480i/576i

480p/576p

720p

480i/576i

480p/576p 480p/576p

720p*

1080i

1080i*

1080p

unselectable unselectable unselectable

* Protected contents on DVDs are output at 480p/

576p resolution. Protected contents on BDs are

output at 576p resolution.

When “Output Video Format” is set to

“Video or S Video”

480i/576i video signals are output from the

LINE OUT VIDEO/S VIDEO or

COMPONENT VIDEO jack, and 480p/576p

video signals are output from the HDMI OUT

jack.

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Output Signals

The audio output differs as follows, depending on the source, output jack, and the selected

settings.

Digital

Analogue

Jacks/

settings^*1

DIGITAL OUT (OPTICAL/

COAXIAL) jacks^*2

HDMI OUT jack^*2

LINE OUT

(R-AUDIO-L)

jacks

Disc/source

Auto^*3

2ch PCM^*3Bitstream^*4

PCM

LPCM 2ch

LPCM 5.1ch

LPCM 2ch

2ch

LPCM 5.1ch LPCM 2ch

LPCM 7.1ch LPCM 2ch

LPCM 7.1ch

Dolby Digital/

LPCM 2ch^*6

Dolby Digital

LPCM 5.1ch^*5LPCM 2ch

LPCM 7.1ch^*5LPCM 2ch

LPCM 2ch

2ch

Dolby Digital

Plus

Dolby Digital/

LPCM 2ch^*6

Dolby Digital/

LPCM 2ch^*6

Dolby TrueHD LPCM 7.1ch^*5LPCM 2ch

DTS/

DTS

LPCM 5.1ch^*5LPCM 2ch

LPCM 2ch^*6

DTS-HD High

Resolution

Audio

DTS-HD Master LPCM 5.1ch^*5

Audio

LPCM 5.1ch^*5

LPCM 2ch

DTS/

LPCM 2ch

2ch

(DTS core)

LPCM 2ch^*6

DTS/

LPCM 2ch

(DTS core)

LPCM 2ch^*6

DVD

LPCM

LPCM 2ch

Dolby Digital

DTS

LPCM 2ch

2ch

Dolby Digital

DTS

Dolby Digital LPCM 2ch

DTS

LPCM 2ch

MPEG

LPCM 2ch

LPCM

LPCM 2ch

LPCM

DTS

LPCM 2ch

DTS

LPCM 2ch

2ch

DTS 5.1 MUSIC DISC

When “Audio Output Priority” is set to “Stereo

Analogue,” LPCM 2ch signals are output from

each jack.

When “Audio Output Priority” is set to “HDMI”

or “Coaxial/Optical,” LPCM 2ch signals are

output from jacks other than the selected jack.

Auto: when “Audio (HDMI)” is set to “Auto” in

the “Audio Settings” setup (page 44).

2ch PCM: when “Audio (HDMI)” is set to “2ch

PCM” in the “Audio Settings” setup (page 44).

Bitstream: when “Dolby Digital” is set to

“Dolby Digital” or “DTS” is set to “DTS” in the

“Audio Settings” setup (page 44).

When “BD Audio Setting” is set to “Direct,”

audio recorded by the source is output by

bitstream. However, this audio may be output as

follows depending on the audio formats

supported by the AV amplifier (receiver).

– When the AV amplifier (receiver) does not

support HD Audio (Dolby Digital Plus, Dolby

TrueHD, DTS-HD High Resolution Audio and

DTS-HD Master Audio) but supports Multi-ch

LPCM, up to LPCM 7.1ch is output.

– When the AV amplifier (receiver) does not

support HD Audio or Multi-ch LPCM but

supports Dolby Digital/DTS, a Dolby Digital

or DTS bitstream is output.

– When the AV amplifier (receiver) does not

support HD Audio, Multi-ch LPCM or Dolby

Digital/DTS, LPCM 2ch is output.

The 2-channel or less-channel primary/

secondary audio signals are output as LPCM 2ch

signals.

When outputting 480i/576i or 480p/576p video

signals from the HDMI OUT jack, Dolby TrueHD

and DTS-HD Master Audio are output as LPCM,

Dolby Digital, or DTS bitstream signals even if

“BD Audio Setting” is set to “Direct” in the “Audio

Settings” setup (page 45).

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

System

Laser: Semiconductor laser

Inputs and outputs

(Jack name:

Jack type/Output level/Load impedance)

LINE OUT R-AUDIO-L:

Phono jack/2 Vrms/10 kilohms

DIGITAL OUT (OPTICAL):

Optical output jack/–18 dBm

(wave length 660 nm)

DIGITAL OUT (COAXIAL):

Phono jack/0.5 Vp-p/75 ohms

HDMI OUT:

HDMI 19-pin standard connector

COMPONENT VIDEO OUT

(Y, P^B/CB, PR/CR):

Phono jack/Y: 1.0 Vp-p/

P^B/CB, PR/CR: 0.7 Vp-p/75 ohms

LINE OUT VIDEO:

Phono jack/1.0 Vp-p/75 ohms

LINE OUT S VIDEO:

4-pin mini DIN/

Y: 1.0 Vp-p, C: 0.3 Vp-p/75 ohms

LAN (100):

100BASE-TX Terminal

EXT:

External memory slot (For connecting the

external memory)

DC output: 5 V 500 mA Max

General

Power requirements:

220–240 V AC, 50/60 Hz

Power consumption:

26 W

Dimensions (approx.):

430 mm × 220 mm × 60 mm

(width/depth/height) incl. projecting parts

Mass (approx.):

2.9 kg

Operating temperature:

5 ºC to 35 ºC

Operating humidity:

25 % to 80 %

Supplied accessories

See page 13.

Specifications and design are subject to

change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Code List

For details, see page 47.

The language spellings conform to the ISO 639: 1988 (E/F) standard.

Number, Language (BD Language Code/DVD Language Code)

not specified

Parental Control/Area Code

For details, see page 47.

Number, Area (Code)

2044, Argentina (ar)

2047, Australia (au)

2046, Austria (at)

2057, Belgium (be)

2070, Brazil (br)

2200, Greece (gr)

2219, Hong Kong (hk)

2248, India (in)

2379, Norway (no)

2427, Pakistan (pk)

2424, Philippines (ph)

2428, Poland (pl)

2238, Indonesia (id)

2239, Ireland (ie)

2436, Portugal (pt)

2489, Russia (ru)

2501, Singapore (sg)

2149, Spain (es)

2499, Sweden (se)

2086, Switzerland (ch)

2543, Taiwan (tw)

2528, Thailand (th)

2184, United Kingdom (gb)

2079, Canada (ca)

2090, Chile (cl)

2254, Italy (it)

2276, Japan (jp)

2092, China (cn)

2093, Colombia (co)

2115, Denmark (dk)

2165, Finland (fi)

2174, France (fr)

2109, Germany (de)

2304, Korea (kr)

2333, Luxembourg (lu)

2363, Malaysia (my)

2362, Mexico (mx)

2376, Netherlands (nl)

2390, New Zealand (nz)

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Automatic Update

The Software contains a functionality by which it is updated

automatically when the Product is connected to a server

belonging to Sony or to a third party designated by Sony. When

you specify your intention not to use this automatic update

functionality, or when the setting asking whether you wish to

update automatically is activated and you decline to execute

updates, it is assumed that you agree that the security

functionality improvements, error corrections, other functional

updates or any other changes offered by Sony through such

updates would not be made to the Software and that your current

and further use of the Software may be affected thereby.

Terms and Conditions of

Use and End User

License Agreement

The Sony Blu-ray Disc player (“Product”) and associated

software (“Software”) are provided and maintained by Sony

Corporation and its affiliates (“Sony”). Sony also provides and

maintains associated service (the “Service”), including any

subsite accessible through the Service’s Internet homepage (the

“Site”). The Software includes software embedded in the

Product; stored on any media, bundled with the Product or

otherwise provided by Sony; downloaded from the Site or

otherwise made accessible or provided by Sony; any such media

and any printed or “on-line” or electronic documentation

associated with the Product and all updates and upgrades thereto.

When the automatic update functionality described in the

previous paragraph is activated, it is assumed that you agree (a)

that the Software will be automatically updated as necessary to

improve security functionality, to correct errors, to improve

update functionality, or for other purposes, and (b) that this

updating of the Software may be accompanied by the

augmenting, modifying, or removing of functionality of the

Software.

4. Additional Terms Governing Product Software

You may use the Software solely in conjunction with the Product

that accompanied the Software. The Software is licensed, not

sold. In addition to the terms set forth in other portions of this

Agreement, the Software is subject to the following:

WHEN YOU ACCESS, BROWSE, OR USE THE SERVICE,

PRODUCT, SOFTWARE, AND/OR SITE, YOU ACCEPT,

WITHOUT LIMITATION OR QUALIFICATION, THE

TERMS AND CONDITIONS SET FORTH HEREIN, SONY’S

ADDITIONAL TERMS AND CONDITIONS OF USE SET

FORTH IN ANY PORTION OF THE SERVICE AND SITE

(COLLECTIVELY THE “AGREEMENT”). IF YOU DO NOT

AGREE WITH THE TERMS AND CONDITIONS OF THIS

AGREEMENT, SONY DOES NOT GRANT THE LIMITED

RIGHTS HEREIN, AND PLEASE DO NOT USE THE

SERVICE, PRODUCT, SOFTWARE, AND/OR SITE.

Use of Software. You may use the Software in conjunction with

the Product for personal use.

Limitation on Reverse Engineering, Decompilation and

Disassembly. You may not modify, reverse engineer,

decompile, or disassemble the Software in whole or in part.

Separation of Components. The Software is licensed as a single

product. Its component parts may not be separated for use on

more than one device unless expressly authorized by Sony.

Data Files. The Software may create data files automatically for

use with the Software. Any such data files will be deemed as part

of the Software.

1. Ownership

The Software and all materials on the Service and/or Site,

including but not limited to images, software and text (the

“Content”) are protected by copyright under copyright law and

international conventions. You cannot use the Software, Service,

Product, Content, and Site except as specified herein. There may

be proprietary logos, service marks, and trademarks found on

this Service or Site. By making them available on the Service

and/or Site, Sony is not granting you any license to utilize those

proprietary logos, service marks, or trademarks. Any

unauthorized use of the Service, Site, Content or Software may

violate copyright laws, trademark laws, the laws of privacy and

publicity, and civil and criminal statutes. All title and copyright

in and to the Software or materials on the Service/Site and any

copies of the Software, are owned by Sony, its licensors, or

suppliers. All rights not specifically granted under this

Agreement are reserved by Sony, its licensors, and suppliers.

Rental. You may not rent or lease the Software.

Software Transfer. You may permanently transfer all of your

rights under this Agreement only as part of a sale or transfer of

Software accompanying the sale or transfer of your Product,

provided you retain no copies, transfer all of the Software

(including all copies, component parts, the media and printed

materials, all versions and any upgrades of the Software and this

Agreement), and the recipient agrees to the terms of this

Agreement.

Dependent Software. The software, network services or other

products other than Software upon which the Software’s

performance depends on might be interrupted or discontinued at

the discretion of the suppliers (software suppliers, service

providers or Sony).

2. Your Rights & Limited License

High Risk Activities. The Software is not fault-tolerant and is

not designed, manufactured or intended for use or resale as on-

line control equipment in hazardous environments requiring fail-

safe performance, such as in the operation of nuclear facilities,

aircraft navigation or communication systems, air traffic control,

direct life support machines, or weapons systems, in which the

failure of the Software could lead to death, personal injury, or

severe physical or environmental damage (“High Risk

The Service, Site, Software, Content, and Product are only for

your personal use. You are responsible for all your activities

hereunder, including all legal liability incurred from your use of

the Service or others who use the Service via your Product. You

may use the Service, Site, Software, Content and Product for

lawful purposes only. You may not distribute, exchange,

modify, sell, or transmit anything you may copy from the

Service or Site, including but not limited to any text, images,

audio, and video, for any business, commercial, or public

purpose. As long as you comply with the terms of this

Agreement, Sony grants you a non-exclusive, non-transferable,

limited right to enter, display, and use the Service, Site, and

Software as set forth in this Agreement. You agree not to

interrupt/disrupt or attempt to interrupt/disrupt the operation of

this Service, Site or Software in any way.

Activities”). Sony and its suppliers specifically disclaim any

express or implied warranty of fitness for High Risk Activities.

GNU General Public, Lesser General Public, & Other Licenses.

Notwithstanding terms in this Agreement, certain portions of the

Software are governed by the GNU Lesser General Public

License, Version 2.1 (LGPL), GNU General Public License

Version 2 (GPL), and other open source code licenses (“Open

Source Licenses”), copies of which are attached hereto and

incorporated herein. For such portions of the Software, to the

extent there is any conflict between this Agreement and the

Open Source Licenses, the Open Source Licenses shall govern

as applicable.

Certain Source Code Availability. Sony is making available the

source code of certain portions of the SOFTWARE per the GPL/

LGPL LICENSES. Please see http://www.sony.com/linux

for access to and instructions on obtaining such source code.

Download from Www.Somanuals.com. All Manuals Search And Download.

5. Changes to Service

10. DISCLAIMER OF WARRANTIES AND DAMAGES;

Sony reserves the right to discontinue one, some, or all of the

features of the Service you receive at any time at its discretion.

Sony may, at its discretion and from time to time change, add or

remove features and functionality, upgrade or modify the

Service, Site and/or Software without notice. You may, at

Sony’s discretion, receive messages regarding these changes and

new features/functionality. Any new text, content, file, data,

product, services, information, software, software tool or other

feature provided by Sony (through the network or by CD-ROM

or other means)(including, but not limited to, any update to

Software provided to you automatically pursuant to Section 3 of

this Agreement) will be subject to this Agreement; provided that,

if separate terms and conditions applicable to such feature are

provided to you, such terms and conditions shall apply to such

feature in priority to this Agreement.

LIMITATION OF LIABILITY

YOU UNDERSTAND THAT USAGE OF THE PRODUCT

AND SERVICE REQUIRES INTERNET SERVICE

PROVIDED BY YOU, FOR WHICH YOU ARE SOLELY

RESPONSIBLE. OPERATION OF THE PRODUCT AND/OR

SERVICE MAY BE LIMITED OR RESTRICTED

DEPENDING UPON THE CAPABILITIES OR TECHNICAL

LIMITATIONS OF YOUR INTERNET SERVICE.

YOUR USE OF THE SOFTWARE, SERVICE, PRODUCT,

CONTENT AND/OR SITE IS AT YOUR OWN RISK. THE

SOFTWARE, SERVICE, CONTENT AND SITE ARE

PROVIDED “AS IS” AND, TO THE FULLEST EXTENT

PERMISSIBLE BY LAW, SONY MAKES NO

REPRESENTATIONS OR WARRANTIES OF ANY KIND

WHATSOEVER (1) FOR THE ACCURACY,

6. Confidentiality

You shall maintain the confidentiality of any information with

regard to the Product and Documentation that is provided under

this Agreement and is not publicly known. You agree not to

disclose such information to any third party without the prior

written consent.

MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, OR NON-INFRINGEMENT ASSOCIATED

WITH THE SERVICE, SITE, AND/OR SOFTWARE; (2)

THAT THE SERVER(S) THAT MAKES THE SERVICE,

SOFTWARE, AND/OR SITE AVAILABLE ARE FREE OF

VIRUSES OR OTHER COMPONENTS THAT MAY

INFECT, HARM, OR CAUSE DAMAGE TO YOUR

COMPUTER, TELEVISION, OTHER EQUIPMENT, OR

ANY OTHER PROPERTY. FURTHERMORE, SONY DOES

NOT WARRANT OR MAKE ANY REPRESENTATIONS

REGARDING THE USE OR THE RESULTS OF THE USE OF

THE SOFTWARE, SERVICE, AND/OR SITE IN TERMS OF

ITS CORRECTNESS, ACCURACY, RELIABILITY, OR

OTHERWISE. NO ORAL OR WRITTEN INFORMATION

OR ADVICE GIVEN BY SONY OR A SONY AUTHORIZED

REPRESENTATIVE SHALL CREATE A WARRANTY OR

IN ANY WAY INCREASE THE SCOPE OF THIS

7. Export Control

You agree not to export from anywhere the Software or thereof

provided to you except in compliance with, and with all licences

and approvals required under, applicable export laws, rules and

regulations.

8. Sony’s Right to Terminate or Modify Terms or

Conditions of this Agreement

Sony may add to, change, or remove any part, term, or condition

of this Agreement at any time, without prior notice. Any changes

to this Agreement or any terms posted on the Service and/or Site

apply as soon as they are posted. By continuing to use the

Service, Product, Software and/or Site after any changes are

posted, you are indicating your acceptance of those changes.

SONY MAY ADD, CHANGE, DISCONTINUE, REMOVE,

OR SUSPEND ANY OTHER CONTENT POSTED ON THE

SERVICE AND/OR SITE, INCLUDING FEATURES AND

SPECIFICATIONS OF PRODUCTS DESCRIBED OR

DEPICTED ON THE SERVICE AND/OR SITE,

WARRANTY. SHOULD THE SOFTWARE, SERVICE, AND/

OR SITE PROVE DEFECTIVE YOU (AND NOT SONY OR

A SONY AUTHORIZED REPRESENTATIVE) ASSUME

THE ENTIRE COST OF ALL NECESSARY SERVICING,

REPAIR OR CORRECTION.

UNDER NO CIRCUMSTANCES, INCLUDING BUT NOT

LIMITED TO SONY’S NEGLIGENCE OR ISSUES

TEMPORARILY OR PERMANENTLY, AT ANY TIME,

WITHOUT NOTICE AND WITHOUT LIABILITY.

WITHOUT PREJUDICE TO ANY OTHER RIGHTS, SONY

MAY SUSPEND OR TERMINATE THIS AGREEMENT

IMMEDIATELY UPON NOTICE IF YOU FAIL TO

COMPLY WITH THE TERMS AND CONDITIONS OF THIS

AGREEMENT. Upon termination, you shall destroy the

Software within fourteen (14) days after the date of such

termination, and upon Sony’s request, provide Sony with the

certification of such destruction. Sony may take any legal and

technical remedies to prevent the violation of and/or to enforce

this Agreement, including without limitation, immediate

termination of your access to the Service if we believe in our

discretion you are violating this Agreement.

RELATED TO THIRD PARTY CONTENT PROVIDERS,

SHALL SONY BE LIABLE FOR ANY CONSEQUENTIAL,

DIRECT, INCIDENTAL, INDIRECT, PUNITIVE, OR

SPECIAL DAMAGES RELATED TO (A) THE USE OF, (B)

THE INABILITY TO USE, OR (C) ERRORS OR OMISSIONS

IN THE SOFTWARE, SERVICE, PRODUCT, AND/OR SITE,

EVEN IF SONY OR AN AUTHORIZED REPRESENTATIVE

THEREOF HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. SOME STATES DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF CONSEQUENTIAL OR

INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION

OR EXCLUSION MAY NOT APPLY TO YOU. IN NO

EVENT SHALL SONY’S TOTAL LIABILITY TO YOU FOR

ALL DAMAGES, LOSSES, AND CAUSES OF ACTION

(WHETHER IN CONTRACT OR TORT, INCLUDING, BUT

NOT LIMITED TO, NEGLIGENCE OR OTHERWISE)

EXCEED THE AMOUNT PAID FOR THE PRODUCT.

9. Indemnification

You agree to indemnify, defend, and hold Sony and all of its

agents, directors, employees, information providers, licensors

and licensees, affiliates, content providers, officers, and parent

(collectively, “Indemnified Parties”), harmless from and against

any and all liability and costs (including, without limitation,

attorneys’ fees and costs), incurred by the Indemnified Parties in

connection with any claim arising out of (i) any breach or alleged

breach by you of this Agreement in any manner, (ii) any

information you submit to Sony hereunder, (iii) any breach or

alleged breach by you of a third party’s rights or (iv) any damage

caused by or alleged to have been caused by you to the Service.

You will cooperate as fully as reasonably required in

Indemnified Party(s) defense of any claim. Sony and/or

Indemnified Parties reserve the right, at its own expense, to

assume the exclusive defense and control of any matter

otherwise subject to indemnification by you and you shall not in

any event settle any matter without the written consent of Sony

and/or Indemnified Parties.

SOME STATES, TERRITORIES AND COUNTRIES DO NOT

ALLOW CERTAIN WARRANTY EXCLUSIONS, SO TO

THAT EXTENT THE ABOVE DISCLAIMER AND

LIMITATION OF LIABILITY MAY NOT APPLY TO YOU.

THE TERMS OF THIS DISCLAIMER DO NOT AFFECT OR

PREJUDICE YOUR STATUTORY RIGHTS AS

CONSUMER, NEITHER DO THEY LIMIT OR EXCLUDE

ANY LIABILITY FOR DEATH OR PERSONAL INJURY

CAUSED BY THE NEGLIGENCE OF SONY OR ANY

OTHER LIABILITY IF AND TO THE EXTENT THAT IT

CANNOT BE LIMITED OR EXCLUDED BY APPLICABLE

LAW .

,continued

Download from Www.Somanuals.com. All Manuals Search And Download.

11. General Provisions

BD-J application

This Agreement, the limited warranty accompanying the

Product, plus any additional terms posted on the Service or Site,

together constitute the entire agreement between Sony and you

with respect to your use of the Product, Service, Site, Content,

and Software. Any notice by Sony hereunder may be made by

letter, email, or posting on the Service or Site. Any cause of

action you may have with respect to your use of this Site must be

commenced within one (1) year after the claim or cause of action

arises. If for any reason a court of competent jurisdiction finds

any provision of this Agreement, or portion thereof, to be

unenforceable, that provision shall be enforced to the maximum

extent permissible so as to affect the intent of this Agreement,

and the remaining terms and conditions of the Agreement shall

continue in full force and effect. This Agreement shall be

governed by and construed in accordance with the laws of Japan.

The BD-ROM format supports Java for

interactive functions.

“BD-J” offers content providers almost

unlimited functionality when creating

interactive BD-ROM titles.

BD-R (page 59)

BD-R (Blu-ray Disc Recordable) is a

recordable, write-once Blu-ray Disc,

available in the same capacities as the BD

below. Since contents can be recorded and

cannot be overwritten, a BD-R can be used to

archive valuable data or storing and

distributing video material.

Glossary

BD-RE (page 59)

AACS

BD-RE (Blu-ray Disc Rewritable) is a

recordable and rewritable Blu-ray Disc,

available in the same capacities as the BD

below. The re-recordable feature makes

extensive editing and time-shifting

applications possible.

“Advanced Access Content System” is a

specification for managing digital

entertainment contents stored on the next

generation of prerecorded and recorded

optical media. The specification enables

consumers to enjoy digital entertainment

content, including high-definition content.

BD-ROM (page 59)

BD-ROMs (Blu-ray Disc Read-Only

Memory) are commercially produced discs

and are available in the same capacities as the

BD below. Other than conventional movie

and video contents, these discs have

enhanced features such as interactive content,

menu operations using pop-up menus,

selection of subtitle display, and slideshow.

Although a BD-ROM may contain any form

of data, most BD-ROM discs will contain

movies in High Definition format, for

playback on Blu-ray Disc/DVD players.

AVCHD (page 61)

The AVCHD format is a high definition

digital video camera format used to record

SD (standard definition) or HD (high

definition) signals of either the 1080i

specification or the 720p specification on

DVDs, using efficient data compression

coding technology. The MPEG-4 AVC/

H.264 format is adopted to compress video

data, and the Dolby Digital or Linear PCM is

used to compress audio data. The MPEG-4

AVC/H.264 format is capable of

Blu-ray Disc (BD) (page 59)

compressing images at higher efficiency than

that of the conventional image compression

format. The MPEG-4 AVC/H.264 format

enables a high definition (HD) video signal

shot on a digital video camera recorder to be

recorded on DVDs in the same way as for a

standard definition (SD) television signal.

A disc format developed for recording/

playing high-definition (HD) video (for

HDTV, etc.), and for storing large amounts of

data. A single layer Blu-ray Disc holds up to

25 GB, and a dual-layer Blu-ray Disc holds

up to 50 GB of data.

A high definition specification that utilises 1080

effective scanning lines and the interlace format.

A high definition specification that utilises 720

effective scanning lines and the progressive

format.

Dolby Digital Plus (page 63)

Developed as an extension to Dolby Digital,

the audio coding technology supports 7.1

multi-channel surround sound.

Download from Www.Somanuals.com. All Manuals Search And Download.

Dolby TrueHD (page 63)

Pop-up menu (page 32)

Dolby TrueHD is a lossless coding

An enhanced menu operation available on

BD-ROMs. The pop-up menu appears when

POP UP/MENU is pressed during playback,

and can be operated while playback is in

progress.

technology that supports up to 8 channels of

multi-channel surround sound for the next

generation optical discs. The reproduced

sound is true to the original source bit-for-bit.

DTS-HD High Resolution Audio (page 63)

Developed as an extension to DTS Digital

Surround format. It supports a maximum

sampling frequency of 96 kHz, and 7.1 multi-

channel surround.

x.v.Colour (page 44)

x.v.Colour is a familiar term for the xvYCC

standard proposed by Sony.

xvYCC is an international standard for

Colour space in video.

DTS-HD High Resolution Audio has a

maximum transmission rate of 6 Mbps, with

lossy compression (Lossy).

This standard can express a wider colour

range than the currently used broadcast

standard.

DTS-HD Master Audio (page 63)

DTS-HD Master Audio has a maximum

transmission rate of 24.5 Mbps, and uses

lossless compression (Lossless), and DTS-

HD Master Audio corresponds to a maximum

sampling frequency of 192 kHz, and

maximum of 7.1ch.

24p True Cinema (page 43)

Movies shot with a film camera consist of 24

frames per second.

Since conventional televisions (both CRT

and flat panels) display frames either at 1/60

or 1/50 second intervals, the 24 frames do not

appear at an even pace.

When connected to a TV with 24p

capabilities, the player displays each frame at

1/24 second intervals — the same interval

originally shot with the film camera, thus

faithfully reproducing the original cinema

image.

HDMI (High-Definition Multimedia

Interface) (page 15)

HDMI is an interface that supports both video

and audio on a single digital connection. The

HDMI connection carries standard- to high-

definition video signals and multi-channel

audio signals to AV components such as

HDMI equipped TVs, in digital form without

degradation.

The HDMI specification supports HDCP

(High-bandwidth Digital Contents

Protection), a copy protection technology for

digital entertainment contents for HDMI.

LTH (Low to High) (page 60)

LTH is a recording system that supports

organic pigment type BD-R.

PhotoTV HD (page 38)

“PhotoTV HD” allows for a highly-detailed

pictures, and photo-like expression of subtle

textures and colours. By connecting Sony

“PhotoTV HD” compatible devices using an

HDMI cable, whole new world of photos can

be enjoyed in breathtaking Full HD quality.

For instance, the delicate texture of the

human skin, flowers, sand and waves can

now be displayed on a large screen in

beautiful photo-like quality.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

“Dimmer” 50

Parental Control 31, 47

Disc information 34

Disc Lock 31

DISPLAY 8

“Photo” 37

“Photo Settings” 49

PhotoTV HD 38, 69

Playable discs 59

POP UP/MENU 9, 32

Words in quotations appear

in the on-screen displays.

Dolby Digital 21, 45

Dolby Digital Plus 63, 68

Dolby TrueHD 63, 69

DTS 21, 45

Numerics

24p True Cinema 69

DTS-HD 63, 69

DVD 59

“Quick Start” 50

“A/V Settings” 34

AACS 68

ANGLE 8

AUDIO 8

Region code 60

Remote 8, 26, 27

“Resetting” 53

Resetting the player 53

Resume 9, 31, 36

Easy Setup 27, 53

Enter characters 52

External memory 23, 32,

“Audio Output Priority”

Audio output signals 63

“Audio Settings” 35, 44

AVCHD 61, 68

Front panel display 11

SCENE SEARCH 9

Searching 33

Batteries 26

Self-diagnosis function 58

“Setup” 39

Slideshow 37

“BD Data” 33, 56

“BD/DVD Viewing

Settings” 47

HDMI 15, 20, 28, 42, 44,

56, 69

HOME 9

Software update 24, 40,

BD-R 59, 68

Home menu 36, 37, 39

BD-RE 59, 68

“Standby Mode” 50

SUBTITLE 8

System Power-Off 16

“System Settings” 50

Bitstream 63

Blu-ray Disc 59, 68

BonusView 23, 32

BRAVIA Sync 16, 56

Language Follow 16

Local storage 23, 32, 56

LTH 69

THEATRE 8, 16

CD 59

Title 33

“Music” 36

Chapter 33

TOP MENU 9

Troubleshooting 54

“TV Type” 41

Child Lock 10, 57

Colour buttons 9

Connecting

AV amplifier

(receiver) 19

TV 14

“Network Diagnostic” 51

“Network Settings” 51

“Network Update” 24, 40

Update 24, 40

“Control for HDMI” 16,

31, 50, 56

One-Touch Play 16, 31

OPTIONS 9, 32, 36, 37

“OSD” 50

“Video” 30

Video output resolution 62

“Video Settings” 34, 41

x.v.Colour 44, 69

Download from Www.Somanuals.com. All Manuals Search And Download.

Sharp All in One Printer AL 1655CS User Manual
Sharp DVD Player XL HF302PHT User Manual
SMSC Computer Hardware LPC47M997 User Manual
Sony Cell Phone D2212 User Manual
Sony DVD Recorder RDR HX780 User Manual
SOYO Computer Hardware SY K7VEMPRO V10 User Manual
Speco Technologies Security Camera VL 6444DC User Manual
Sunbeam Coffee Grinder EM0405 User Manual
Sun Microsystems Server X6450 User Manual
SUPER MICRO Computer Home Theater Server 5017P TF User Manual