ST2416S Series
24” x 24” Hemispherically-Radiating
®
SpeakerTile
Recommended Installations:
• 9/16” T-bar suspended ceiling systems
•
15/16” T-bar suspended ceiling systems
Recommended Environment:
• Indoor or weather-protected outdoor
Recommended Accessories:
• Safety Strap (secures SpeakerTile to
building structure)
Available Models:
ST2416S:
Plain white (shown in photo)
ST2416S-3D1:
Fine Fissured® (or similar) tile pattern
ST2416S-3D2:
Cortega® (or similar) tile pattern
HIGH QUALITY, WIDE-DISPERSION
INVISIBLE SPEAKERTILE®
ST2416S-3D4:
Fissured® (or similar) tile pattern
ST2416S-3D7:
Optima®/Ultima® (or similar) tile pattern
The Sound Advance® ST2416S SpeakerTile® is a remarkable combination of wide
bandwidth, wide dispersion, and a highly-refined aesthetic presentation, designed
for commercial installations. It is part of a unique family of truly invisible distributed
sound products from Sound Advance.
ST2416S-3D21:
Cirrus® (or similar) tile pattern
Tegular cuts are available to match tegular
ceiling tiles on 15/16” T-bar grids. Tegular cuts
are not required to match tegular ceiling tiles
on 9/16” T-bar grids. (See below for ceiling tile
examples.) Call Sound Advance for details.
All ST2416S SpeakerTile models are available in several mounting options,
allowing them to be easily installed into standard T-bar suspended ceiling systems,
completely replacing a standard 2 ft x 2 ft ceiling tile.
The ST2416S is available in six different models, featuring a selection of standard
3-dimensional patterns or factory-applied surface finishes that allow a match with
almost any suspended ceiling tile pattern. The white Expanded PolyStyrene® (EPS)
front surface of the SpeakerTile allows all models to optionally be finished on-site
with any water-soluble finish, such as latex paint, or covered with light wallpaper,
fabrics and selected texture coats*, further enhancing the SpeakerTile’s ability to
blend invisibly with almost any interior design choice.
Compatible Ceiling Tile Types
Flush
Tegular
Patented Planar Diaphragm Technology™ allows a ST2416S that has been
properly installed in a suspended ceiling to radiate sound in a 140° hemispherical
pattern with smooth, even coverage. This dispersion characteristic allows ST2416S
speakers to be spaced farther apart than narrow-dispersion conventional speakers,
reducing the total quantity of loudspeakers required in almost any installation.
The ST2416S is a one-way, full-range device. The ST2416S is transformer-
coupled, with the following input taps: 0.5W, 1W, 2W, 4W, 8W, 16W and 8-ohm
bypass.
15/ ” Grid
15/ ” Grid
16
16
[*Please contact Sound Advance for advice before applying any textured coating, light
wallpaper or fabrics to the ST2416S.]
9
9
/ ” Grid
/ ” Grid
16
16
Fine Fissured, Cortega, Fissured, Optima, Ultima and Cirrus are registered trademarks of Armstrong World Industries.
Download from Www.Somanuals.com. All Manuals Search And Download.
|