AH1-CC-01
HEPA Air Purifier
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
PACKAGE CONTENTS
Air Purifier
HEPA Filter & Cotton Filter
Cotton Filter Replacements (3, inside unit)
Carbon Filter (Inside unit)
Remote Control & 1 Lithium CR2025 Battery
Operating Instructions
SPECIFICATIONS
•
•
•
Noise level is measured at a distance of 3.28 ft away from the front of the unit.
Power consumption is measured when the fan runs at the highest speed setting.
These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.
MODEL
Recommended Cleaning Area
AH1-CC-01
380 sq. ft.
Power Consumption (W) (Turbo / High / Low / Mute)
62 / 48 / 43 / 37 WATTS
Air Flow Volume (CFM) (Turbo / High / Low / Mute)
Power Source
165/118/88/65 CFM
115 V / 60 HZ
Sound Pressure Level dB (A) (Turbo / High / Low / Mute)
Product Weight
48 / 38 / 34 / 26 dB (A)
22 lbs
Product Dimensions ( W x D x H )
15.625” x 9.625” x 22.625”
DISCLAIMER
ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE
PRESENTATION OF THE MANUFACTURER. SOLEUS INTERNATIONAL HAS NOT CONDUCTED INDEPENDENT
TEST TO THE INFORMATION AND THE SPECIFICATIONS PRESENTED HEREWITHIN.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT DIAGRAM
ACTIVATED CARBON FILTER
LED INDICATOR
LIGHTS
HEPA & COLD
CATALYST HOLDER
MODE & POWER
BUTTONS
CARBON FILTER
HOLDER
AIR PURIFIER
BODY
HEPA & COLD CATALYST FILTERS
DUST
AIR INTAKE
FRAME
PARTICULATE FILTER
FRONT PANEL
REMOTE HOLDER
POWER CORD
HANDLE
AIR EXHAUST
PLASMA & NEGATIVE
ION GENERATOR
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION FOR USE
1. Remove the front panel by
pressing the two small buttons
on the bottom of each side.
2. Remove the Dust Frame
1
3. Remove the HEPA & Cold
Catalyst Filter Holder
4. Remove the HEPA & Cold
Catalyst Filter from the package.
2
5. Insert HEPA & Cold Catalyst
Filter into the holder.
6. Place the HEPA & Cold Catalyst
Filter Holder back into the unit.
7. Place the Dust Frame back into
the unit.
3
4 & 5
8. Close the Front Panel
9. Remote - Remove the battery
holder in the Remote Control
10.Place the battery inside the
holder. Make sure to align the
battery according to the image
to the right.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS & OPERATION
MODE BUTTON
ON/OFF BUTTON
INDICATOR LIGHTS
REMOTE
RECEIVER
AIR QUALITY SENSOR
ODOR
SENSOR
1) Power On and Off - Press the ON/OFF button once on the control panel or remote control to manually
turn the unit on. Press the ON/OFF button once more to turn the unit off.
2) Mode Selection - Press the MODE button to cycle between the different modes: Auto, Turbo, Sleep,
Anion, and Odor.
3) Fan Speed - Use the remote control to change the FAN speed. You can choose between: Mute (ultra-
quiet), Low, and High. In certain modes, the fan will speed will be pre-determined.
4) Timer - To program the unit to automatically turn off, press the TIMER button when the unit is on. You
can select either 1, 2 or 4 hours with the Timer. Each press of the TIMER button changes the shut-off
time. Once the desired time (1, 2 or 4 hours) is over, the unit will automatically shut down. If you decide
not to use the timer, press the TIMER button until none of the timer indicator lights are lit on the control
panel.
5) Clean/Change - When the clean light indicators are lit, one of the filters needs to be cleaned or changed.
The Dedust Filter (Particulate filter) may be cleaned with soapy water.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL AND OPERATION
To program the unit to automatically
turn off, press the TIMER button when
the unit is on. The timer can be set for
1, 2, or 4 hours.
To program the unit for Auto-on turn on,
press the TIMER button when the is off.
Press the ODOR button to engage odor
mode. In odor mode the Plasma Genera-
tor is engaged and the fan speed runs at
the fastest speed. You can change the fan
speed in odor mode.
Press the ON/OFF button to turn the
unit on and off.
Press the ANION button to engage anion
mode. In anion mode the negative ion Gen-
erator is engaged and the fan speed runs
at low speed. You can change the fan
speed in odor mode.
Press the SPEED button to cycle
through the fans speeds: High, Low, &
Mute
Press the SLEEP button to engage sleep
mode. In sleep mode the fan speed runs
at mute or low speed depending on air
quality. You cannot change the fan speed
in sleep mode.
Low
High
Mute
Press the TURBO button to engage
turbo mode. In turbo mode the Plasma
Generator is engaged and the fan
speed runs at the fastest speed. This
mode quickly cleans the air.
Press the AUTO button to engage auto
mode. In auto mode the unit automatically
adjust the plasma generator according to the
air quality. You cannot change the fan speed
in auto mode.
This mode is not available on this model.
Hold the LOCK button for over 2 sec-
onds to lock the remote control. To
unlock the remote, press the LOCK
button again for more than 2 seconds.
Press the LUM button to the brightness of
the LED indicator lights. With each press
the lights will adjust between bright-dark-
dark-bright. The Sensor lights will cycle
between bright-dark-off.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Air Purifier
If you need to clean your Air Purifier, please follow the
disassembly instructions below. Before cleaning, unplug
your air purifier.
1. Open the Front Panel
2. Remove the Dust Frame
1
3. Remove the HEPA & Cold Catalyst
Filters.
4. Remove HEPA & Cold Catalyst Filter
holder.
5. Remove the Activated Carbon Filter
6. Clean the air purifier body using a soft dry
cloth.
2
7. Use a vacuum cleaner with a hose at-
tachment to remove dust from the filters.
If dust remains on the Dedust
(particulate) filter, you may clean this filter
with warm water. Do not wash the HEPA,
Cold Catalyst, or Carbon filters. If dust re-
mains on these filters, you may use a
cleaning rag or brush to remove the ex-
cess dust.
3
4
8. When finished, re-install all necessary
components.
9. Once the unit is re-assembled, use a vac-
uum hose attachment to clean the sensor
holes on the front of the air purifier.
Activated Carbon
Filter
5
9
8
Download from Www.Somanuals.com. All Manuals Search And Download.
HEPA, Cold Catalyst, & Activated Carbon Filters
After an extended period or use, or certain adverse conditions, your filters will need to be replaced.
1. Cold Catalyst Filter - This filter can last 3 months to 1 year in a non-smoking envi-
ronment. When replacing the cold catalyst filter, make sure the blue surface is fac-
ing outwards. For prolonged use, clean monthly using a vacuum hose attachment.
2. HEPA FILTER - When the Clean/Change light is lit over the word “HEPA”, the
HEPA filter needs to be replaced. When replacing the HEPA filter, make sure the
blue surface of the cold catalyst filters is facing outwards. After the HEPA filter is re-
placed, the change HEPA light will turn off. For prolonged use, clean every 3
months with a vacuum hose attachment.
3. Activated Carbon Filter - The activated carbon filter should last between 2-3 years.
If the filter begins to smell, remove the filter and place in the sun for 3-5 hours. If
the smell is still present after sitting in the sun, replace the Activated Carbon Filter.
For prolonged use, clean every 3 months with a vacuum hose attachment.
NOTE: Filters are consumable products and are not covered under the general war-
ranty.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
TROUBLESHOOTING TIPS
PROBLEM
CAUSE
SOLUTION
Battery is dead
Replace battery
The remote control
Battery is installed incorrectly
Power cord is unplugged
Install the batter correctly
Plug in power cord
The unit will not start
Unit is not blowing air
Front panel is installed
incorrectly
Install front panel correctly
Contact customer service
Something is blocking the air
intake and/or exhaust
Remove any obstacles that are
obstructing the air intake and/or
exhaust
The unit is not cleaning the air
enough
Filters need to cleaned/replaced Clean/replace the filters that
maybe clogged with dust and
debris
The unit smells
Clean or replace the activated
carbon filter
The unit is too close to the TV
and/or fluorescent lights
Move the unit at least 6 feet
away from nearby electronics
and fluorescent lights
There is interference with the
TV and/or nearby lights are
flickering
Power cords from other elec-
tronics are close to the unit
Move the unit at least 6 feet
away from nearby electronics
and fluorescent lights
10
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
One Year Limited Warranty
Soleus International, Inc. warrants the accompanying Soleus Air Powered by Gree Air Purifier to be free of defects in
material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from
the date of original retail purchase in the United States.
If the unit exhibits a defect in normal use, Soleus International will, at its option, either repair or replace it, free of
charge within a reasonable time after the unit is returned during the warranty period.
As a condition to any warranty service obligation, the consumer must present this Warranty Certificate along with a
copy of the original purchase invoice.
THIS WARRANTY DOES NOT COVER:
•
Damage, accidental or otherwise, to the unit while in the possession of a consumer not caused by a defect in
material or workmanship.
•
Damage caused by consumer misuse, tampering, or failure to follow the care and special handling provisions
in the instructions.
•
•
Damage to the finish of the case, or other appearance parts caused by wear.
Damage caused by repairs or alterations of the unit by anyone other than those authorized by Soleus Interna-
tional Inc.
•
•
Freight and Insurance cost for the warranty service.
Filter and Accessories
ALL WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANT ABILITY ARE LIMITED TO
ONE-YEAR DURATION OF THIS EXPRESS LIMITED WARRANTY. SOLEUS INTERNATIONAL INC.
DISCLAIMS ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES AND IN NO EVENT
SHALL SOLEUS INTERNATIONAL INC’S LIABILITY EXCEED THE RETAIL VALUE OF THE UNIT FOR
BREACH OF ANY WRITTEN OR IMPLIED WARRANTY WITH RESPECT TO THIS UNIT.
This warranty covers only new products purchased from our authorized dealers or retailers. It does not cover used, sal-
vaged, or refurbished products.
As some states do not allow the limitation or exclusion of incidental or consequential damages, or do not allow
limitation on implied warranties, the above limitations and exclusions may not apply to you. This warranty gives you
specific legal rights, and you may also have other rights that vary from state to state.
For Technical Support and Warranty Service
Please Call (888) 876-5387
Or Write To:
Soleus International, Inc.
20035 E. Walnut Dr. N.
City of Industry, CA 91789
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|