Premier Series
IC-LCR7
A HI PERFORMANCE LCR THAT CAN STAND WITH
THE BEST TWO CHANNEL
The left and right speaker in an audiophile two-channel
system can uncannily recreate all the complexity, detail
and space of a live performance, while the center
channel speaker is regarded as the most important
speaker in any multi-channel, surround system.
LCR’s, are a multipurpose design for both of these
critical applications. The IC LCR7 is a D’Appolito Array,
designed by Snell chief engineer, Joe D’Appolito. As a
Left & Right it can haunt you with precision and
Dimensions:
• 19” Wide • 7” High • 8.75” Deep
soundstage, while as a Center it captures every whisper, every nuance. Together they set the tonal balance, called
timbre, for the rest of the system. The IC LCR7 takes its drivers and crossover design of the acclaimed Snell LCR7 and
integrates them into a utility, in-cabinet LCR. As such, it is designed to fit into furniture or millwork, and is tuned to
compensate for the sonic problems that these cabinet boundaries cause. The result is a speaker that perfectly matches
the LCR7, and its two cousins the IW LCR7 In-Wall and OH LCR7 In-Ceiling Monitor. Any combination of these four
models can be mixed and matched to make a fully integrated system that will work with any room décor.
Application Alternatives:
System Suggestions:
IW-LCR7 In Wall
SR7 Surround
LCR7 In Room
OH-LCR7 In Ceiling
Basis 150 Sub
Like all Snell loudspeakers, each IC-LCR7 is hand tuned for natural imaging and sonic depth.
Design:
Tweeter
Master Reference.
Acoustic Suspension
D’Appolito array
1-inch SEAS silk dome
Grille
Boundary compensation
"Normal" – When placed on
stands away from wall.
"Boundary"– When placed on
shelf or near wall.
Black cloth over MDF frame.
Woofer
Frequency Response
75Hz-20kHz ± 3dB
Two 5.25-inch SEASTreated Paper,
5mm Excursion
Finishes
Textured black paint. Can
be ordered in most wood
and paint finishes.
Sensitivity
[1Watt (2.83v) @ tm]
90 dB
Video Shielding
Yes
Wiring
Bi-amp, bi-wire ready
Weight
Crossover Frequency
2.0 kHz
20 lbs.
Connections
Impedance
Nominal 4 Ohms
5-way satin, nickel-plated, brass
terminals, accepts 5/16 - inch
spades, pins, banana plugs and
bare wire to 12 gauge.
Crossover
Maximum Output
110 dB
Discrete tweeter, and woofer
circuit boards. Time alignment
and coherency are achieved
through the transition region from
driver to driver. Each crossover is
individually tuned by our
Cabinet Construction
Hardwood veneer over 3/4-inch
MDF Panels. Textured painted
MDF baffle.
Recommended Power
50 Watts minimum
250 Watts maximum
technicians to ± 0.5db of the
Manufactured in the USA by Snell Acoustics, Peabody MA 01960 • www.snellacoustics.com • 978-538-6262 • © Snell Acoustics, Inc • All specifications subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
|