Smooth Fitness Treadmill 917HRO User Manual

USER’S MANUAL  
9.17HRO MOTORIZED TREADMILL  
MODEL NUMBER: 9.17HRO  
USER WEIGHT LIMITATION: 350lbs. (160kgs.)  
SERIAL NUMBER (found on frame):  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
SMOOTH 9.17HRO MOTORIZED TREADMILL  
POWER REQUIREMENTS  
Power Requirements:  
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN  
ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS  
TO WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH  
THE PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED  
ELECTRICIAN.  
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage  
spikes, surges and noise interference can result from weather conditions or from other appliances being turned on or  
off. To reduce the possibility of treadmill damage, always use a surge protector (not included) with your treadmill.  
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge  
protector with a UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage  
rating of 400V or less and an electrical rating 120VAC, 15 amps.  
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance  
for electric current, should the treadmill malfunction. This treadmill comes with an electrical cord having an  
equipment-grounding conductor and a grounding plug. Always plug the power cord into a surge protector, and plug  
the surge protector into an appropriate outlet that is properly installed and grounded in accordance with all local  
codes and ordinances.  
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated in the  
drawing below.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
SMOOTH 9.17HRO MOTORIZED TREADMILL  
PREASSEMBLY  
Open the boxes:  
You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are  
included in the boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this  
product to be assembled properly. If you are missing any parts or have any assembly questions call the  
manufacturer.  
Gather your tools:  
Before starting the assembly of your unit, make sure that you have gathered all the necessary tools you may require  
to assemble the unit properly. Having all of the necessary equipment at hand will save time and make the assembly  
quick and hassle-free.  
Clear your work area:  
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is  
free from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a  
comfortable amount of free area around the unit for unobstructed operation.  
Invite a friend:  
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another  
person when assembling this product.  
User Weight Limitation:  
Please note that there is a weight limitation for this product. If you weigh more than 350lbs. (160kgs.) it is not  
recommended that you use this product. Serious injury may occur if the user’s weight exceeds the limit  
shown here. This product is not intended to support users whose weight exceeds this limit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
SMOOTH 9.17HRO MOTORIZED TREADMILL  
HARDWARE COMPARISON CHART  
Hardware chart:  
For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided  
to help you identify those items that may be unfamiliar to you.  
NO. DESCRIPTION  
Console Support Fixing  
Plate  
QTY.  
9
2
M6 x 15mm Console  
Fixing Screw  
11  
16  
17  
2
8
2
#8 x 25mm Screw  
Handlebar Fixing Plate  
M8 x 25mm Allen Head  
Bolt  
18  
6
M8 x 15mm Allen Head  
Bolt  
19  
A
4
1
1
1
Wrench  
B
Screw Driver  
Allen Wrench  
C
MILIMETERS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
SMOOTH 9.17HRO MOTORIZED TREADMILL  
PARTS LIST  
NO. DESCRIPTION  
QTY.  
1
ORDER NO.  
9.17HRO-01  
9.17HRO-02  
9.17HRO-03  
9.17HRO-04  
9.17HRO-05  
9.17HRO-06  
9.17HRO-07  
9.17HRO-08  
9.17HRO-09  
9.17HRO-10  
9.17HRO-11  
9.17HRO-12  
9.17HRO-13  
9.17HRO-14  
9.17HRO-15  
9.17HRO-16  
9.17HRO-17  
9.17HRO-18  
9.17HRO-19  
9.17HRO-20  
9.17HRO-21  
9.17HRO-22  
9.17HRO-23  
9.17HRO-24  
9.17HRO-25  
9.17HRO-26  
9.17HRO-27  
NO. DESCRIPTION  
Upright Cross Brace Bolt  
QTY. ORDER NO.  
1
Computer  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
2
2
1
1
1
1
1
1
1
54  
1
1
2
1
4
2
2
2
1
4
1
2
2
4
1
1
1
9.17HRO-28  
9.17HRO-29  
9.17HRO-30  
9.17HRO-31  
9.17HRO-32  
9.17HRO-33  
9.17HRO-34  
9.17HRO-35  
9.17HRO-36  
9.17HRO-37  
9.17HRO-38  
9.17HRO-39  
9.17HRO-40  
9.17HRO-42  
9.17HRO-43  
9.17HRO-44  
9.17HRO-45  
9.17HRO-46  
9.17HRO-47  
9.17HRO-48  
9.17HRO-49  
9.17HRO-50  
9.17HRO-51  
9.17HRO-52  
9.17HRO-53  
9.17HRO-54  
9.17HRO-55  
Console Housing-  
Upper  
2
1
Metal Cap  
Console Housing-  
Bottom  
3
1
Upright-Left  
Console Tray  
Support Tube  
4
Rubber Insert  
4
Rubber Cap for  
Audio Input  
5
2
Upright Cross Brace  
M8 x 25mm Console Tray  
Support Tube Bolt  
6
Safety Key  
1
7
Console Support Tube  
1
Handlebar-Right  
Front Handlebar  
Upright-Right  
#8 x 10mm Console  
Housing Screw  
8
11  
2
Console Support Tube  
Fixing Plate  
9
#8 x 19mm  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
Computer Screw  
5
#8 x 15mm Drill Screw  
M6 x 15mm  
Console Fixing Screw  
Elevation Motor  
Cover Board  
2
Handlebar Cover-  
Left #1  
1
Power Cord  
Handlebar Cover-  
Left #2  
M6 x 15mm  
Bolt for Power Plate  
1
Handlebar Cover-  
Right #2  
1
Power Plate  
Handlebar Cover-Right  
#1  
1
Pivot Bracket Screw  
Pivot Bracket  
#8 x 25mm Screw  
8
Handlebar Fixing Plate  
2
Transport Wheel Shaft  
M14 x 90mm Bolt  
Wire Clip  
M8 x 25mm  
Allen Head Bolt  
6
M8 x 15mm  
Allen Head Screw  
4
#8 x 10mm Screw  
3
Base Frame End Cap  
Elevation Motor  
Cir-Clip  
Console Tray  
Fixing Plate  
1
Console Tray  
1
Console Tray Cover  
Handlebar-Left  
1
Transport Wheel  
5/16” x 10mm Screw  
1
16 x 10mm  
Spring Washer  
Handlebar Grip  
2
EKG Pulse Sensor  
Handlebar End Cap  
2
M10 x 35mm Bolt  
Base Frame  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
SMOOTH 9.17HRO MOTORIZED TREADMILL  
PARTS LIST  
NO. DESCRIPTION  
QTY. ORDER NO.  
NO. DESCRIPTION  
QTY. ORDER NO.  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
Diving Tube  
Micro Switch  
Level Adjuster  
1
3
9.17HRO-56  
9.17HRO-57  
9.17HRO-58  
9.17HRO-59  
9.17HRO-60  
9.17HRO-61  
9.17HRO-62  
9.17HRO-63  
9.17HRO-64  
9.17HRO-65  
9.17HRO-66  
9.17HRO-67  
9.17HRO-68  
9.17HRO-69  
9.17HRO-70  
84  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
97  
98  
99  
Running Belt  
Rear Roller Shaft  
Rear Roller  
1
1
1
1
2
9.17HRO-84  
9.17HRO-85  
9.17HRO-86  
9.17HRO-87  
9.17HRO-88  
9.17HRO-89  
9.17HRO-90  
9.17HRO-91  
9.17HRO-92  
9.17HROI-93  
9.17HRO-94  
9.17HRO-95  
9.17HRO-96  
9.17HRO-97  
9.17HRO-98  
9.17HRO-99  
9.17HRO-100  
9.17HRO-101  
9.17HRO-102  
9.17HRO-103  
4
Fold Up Position  
Limiting Rod  
1
Front Shroud  
Fold Up Slipping  
Rod Sleeve  
M5 x 20mm  
Allen Head Screw  
2
Position Limiter  
Fold Up Slipping Rod  
Wheel Support  
M8 x 40mm Bolt  
PU Wheel  
2
Round Cap  
2
Elevation Support  
Frame-#1  
1
2
1
Cir-Clip  
2
2
2
4
2
2
2
4
2
1
1
1
2
2
12 x 34.5mm Shaft  
M14 x 53mm Bolt  
Copper Bushing-#1  
4
Motor Bottom Tray  
Motor Hood  
1
Elevation Support  
Frame-#2  
1
M4 x 25mm  
Motor Hood Screw  
2
M14 x 62mm Bolt  
Plastic Cap  
13 x 6.5mm Washer  
M5 x 12mm Screw  
N/A  
13  
2
Copper Bushing-#2  
#6202 Bearing  
N/A  
100 Transformer-Controller  
101 Motor Control Board  
102 Elevation Control Board  
Side Rail-Right  
Side Rail-Left  
Deck End Cap-Left  
Deck End Cap-Right  
1
1
9.17HRO-73  
9.17HRO-74  
9.17HRO-75  
9.17HRO-76  
9.17HRO-77  
9.17HRO-78  
9.17HRO-79  
9.17HRO-80  
9.17HRO-81  
9.17HRO-82  
9.17HRO-83  
Motor Hood  
1
103 Fixing Bracket  
1
104 N/A  
M8 x 25mm  
Deck Fixing Bolt  
10  
2
105 M5 Nut  
1
1
9.17HRO-105  
9.17HRO-106  
9.17HRO-107  
9.17HRO-108  
9.17HRO-109  
9.17HRO-110  
9.17HRO-111  
Deck Grounding  
Metal Sheet-Upper  
M5 x 10mm  
106 Philip Head Screw  
#8 x 10mm Wood  
Screw  
7
107 Lock Pin Guider  
108 Lock Pin Push Rod  
109 Deck Frame  
1
Running Deck  
Front Roller Shaft  
Front Roller  
1
1
1
1
1
110 Spring Load Knob  
111 Deck Rubber Cushion  
1
Roller Pulley  
1
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
SMOOTH 9.17HRO MOTORIZED TREADMILL  
PARTS LIST  
NO. DESCRIPTION  
QTY. ORDER NO.  
NO. DESCRIPTION  
QTY. ORDER NO.  
Power Fold Switch  
112 Side Rail Guide Block  
113 M10 x 16mm Bolt  
M6 x 70mm  
114 Roller Adjuster Bolt  
8
8
9.17HRO-112  
9.17HRO-113  
9.17HRO-114  
9.17HRO-115  
9.17HRO-116  
9.17HRO-117  
9.17HRO-118  
9.17HRO-119  
9.17HRO-120  
9.17HRO-121  
9.17HRO-122  
9.17HRO-123  
9.17HRO-124  
9.17HRO-125  
9.17HRO-126  
9.17HRO-127  
9.17HRO-128  
9.17HRO-129  
9.17HRO-130  
9.17HRO-131  
9.17HRO-132  
9.17HRO-133  
9.17HRO-134  
9.17HRO-135  
9.17HRO-136  
9.17HRO-137  
9.17HRO-138  
9.17HRO-139  
140 Wire-Upper Section  
Power Fold Switch  
141 Wire-Bottom Section  
Safety Key Power  
142 Wire-Bottom Section  
Wire Loom-  
143 Bottom Section  
N/A  
1
9.17HRO-140  
9.17HRO-141  
9.17HRO-142  
9.17HRO-143  
9.17HRO-144  
9.17HRO-145  
9.17HRO-146  
9.17HRO-147  
9.17HRO-148  
3
N/A  
1
115 M8 Nut  
15 x 8mm Spring  
116 Washer  
10  
12  
5
144 Power Switch  
145 Non-Fuse Brake  
146 Power Socket  
147 Water Bottle  
1
117 Board Clip  
118 Metal Clip  
119 Wheel Shaft  
120 M8 Nylon Nut  
Running Deck Belly  
121 Pan  
Deck Frame  
122 Rubber Cushion  
1
1
1
2
1
1
Heart Rate  
148 Transmitter Belt  
3
1
149 N/A  
150 N/A  
151 N/A  
152 N/A  
EKG Pulse Sensor  
153 Wire  
EKG Pulse Sensor  
154 Wire – Upper Section  
2
123 Motor Belly Pan  
124 Driving DC Motor  
125 Motor Holder  
1
1
1
2
2
1
9.17HRO-153  
9.17HRO-154  
9.17HRO-155  
M8 x 87mm  
126 Motor Holder Bolt  
1
127 30 x 8mm Washer  
128 PU Cushion  
M8 x 15mm  
129 Motor Fixing Bolt  
2
155 Power Folding Switch  
1
2
130 16 x 8mm Washer  
131 M10 Nylon Nut  
132 22 x 10mm Washer  
133 M10 x 188mm Bolt  
134 Driving Belt  
2
1
1
1
1
135 Bracket Screw  
136 AMC Sensor  
1
N/A  
6
137 Plastic Fixing Insert  
Wire Loom-Upper  
138 Section  
Safety Key Power  
139 Wire-Upper Section  
1
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
SMOOTH 9.17HRO MOTORIZED TREADMILL  
PARTS DIAGRAM  
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.  
1
4
2
4
6
8
7
3
10  
148  
8
8
154  
23  
20  
8
11  
18  
9
8
21  
10  
10  
18  
154  
22  
17  
147  
12  
29  
137  
13  
16  
18  
9
155  
31  
18  
28  
153  
16  
17  
14  
32  
137  
15  
16  
24  
25  
11  
33  
26  
16  
153  
141  
11  
35  
27  
28  
29  
30  
34  
25  
27  
36  
19  
138  
139  
140  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
PARTS DIAGRAM  
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
PARTS DIAGRAM  
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.  
70  
68  
67  
69  
69  
70  
74  
68  
75  
76  
73  
37  
79  
77  
77  
37  
79  
78  
79  
118  
82  
77  
77  
81  
78  
83  
80  
37  
87  
88  
89  
84  
85  
37  
92  
93  
37  
37  
94  
96  
90  
91  
94  
98  
37  
91  
37  
94  
37  
86  
94  
99  
98  
99  
95  
97  
92  
89  
88  
37  
37  
93  
96  
98  
69  
37  
97  
98  
69  
37  
69  
65  
65  
37  
37  
69  
122  
37  
37  
69  
37  
37  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
ASSEMBLY  
STEP 1:  
Remove the upper carton from your treadmill and cut down the corners of the lower carton, as shown in FIG1. Then  
remove the Handlebars and place them out of the way for now, as shown in FIG2.  
Attach the Console Housing (3) to the Left Upright (30) and secure using the Console Support Tube Fixing Plate (9)  
and M8 x 25mm Allen Head Bolts (18). Take care not to trap any wires at this point  
FIG.1  
FIG.2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
ASSEMBLY  
STEP 2:  
First connect the wires between Left Upright (30) and Base Frame (55). Rotate up the Left Upright (30) and Right  
Upright (36) then secure it to the Base Frame (55) with four M8 x 15mm Allen Head Screws (19).  
NOTE: Make sure all wires are recessed into the frame, do not trap any of the wires. Do not fully tighten screws (19)  
at this point. You may find it easier to stand on the bed of the treadmill to perform this part of the assembly.  
30  
36  
19  
19  
55  
138  
139  
140  
30  
141  
55  
143  
142  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
ASSEMBLY  
STEP 3:  
Rotate the Console Housing (3) to position as shown and secure with two M6 x 15 Screws (11).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
ASSEMBLY  
STEP 4:  
Attach the Upright Cross Brace (32) to the Left and Right Uprights (30 and 36) and secure with Metal Caps (29) and  
Upright Cross Brace Bolts (28). Do Not fully tighten Bolts (28) at this point but do fully tighten Screws (19) after  
you’ve assembled the cross brace (32).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
ASSEMBLY  
STEP 5:  
Remove the Bracket Screw (135) from Console Tray Fixing Plate (21). Attach the Console Tray (22) to the Console  
Housing (3) and secure by screwing the Bracket Screw (135) through the Console Tray Fixing Plate (21) and into the  
Console Housing (3), as shown in FIG3.  
FIG3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
ASSEMBLY  
STEP 6:  
Insert the Console Tray Support Tube (31) into the Upright Cross Brace (32). Rotate the Upright Cross Brace (32)  
and insert the top of the Console Tray Support Tube into the Console Tray (22), as shown in FIG4. Secure the  
Console Tray Support Tube (31) in place using the M8 x 25 Console Tray Support Tube Bolt (33). Tighten the  
Upright Cross Brace Bolt (28).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
ASSEMBLY  
STEP 7:  
Connect the Sensor Wires, as shown in FIG5. Attach the Handlebar-Right (34) and Handlebar-Left (24) to the  
Right and Left Uprights (36 and 30) and secure with Handlebar Fixing Plates (17) and M8 x 25 Allen Head  
Bolts (18).  
NOTE: Please make sure not to pinch the Sensor Wires when attaching the Handlebars.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
ASSEMBLY  
STEP8:  
Attach the Handlebar Cover-Right #1 (15) and Handlebar Cover-Right #2 (14) to the Upright-Right (36) and secure  
with #8 x 25 Handlebar Cover Screws (16) and Plastic Fixing Inserts (137). Repeat the procedure on the Upright-Left  
(30) with Handlebar Cover-Left #1 (12), Handlebar Cover-Right (13) and #8 x 25 Handlebar Cover Screws (16) and  
Plastic Fixing Inserts (137).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
POWER FOLD INSTRUCTIONS  
In order for the power fold system to work you need to plug your 9.17HRO in and insert the safety key.  
The 9.17HRO treadmill has a unique Easy-Up power fold system. Before folding the 9.17HRO press the “reset”  
button on the console. This will ensure that the 9.17HRO is in its lowest position and the 9.17HRO will fold. The  
9.17HRO won’t fold unless it’s in this position.  
Follow these instructions to power fold your 9.17HRO:  
1. Press stop on the console and wait until the belt has fully stopped.  
2. Press “reset” on the console. The deck will now de-elevate to Level 1.  
3. Turn the Spring Loaded Knob clockwise until it’s fully engaged. A click can be felt at this point.  
4. Push the Power Fold Switch located on the front of the Left Upright and the deck will now start to fold. Keep  
holding this switch until the deck has fully folded.  
5. Turn off the power and unplug the treadmill before you leave it. Do not leave the treadmill unattended and  
plugged in at any time.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
UNFOLDING INSTRUCTIONS  
IMPORTANT  
Before unfolding the 9.17HRO plug the treadmill in and insert the safety key.  
Follow these instructions to un-fold your 9.17HRO.  
1. Push the Power Fold Switch “down”. The 9.17HRO will now start to descend. Keep holding the switch until the  
deck has fully descended.  
2. Turn the Spring Loaded Knob counter clockwise until it disengages. If you do not do this the 9.17HRO will not  
elevate/incline while being used.  
IMPORTANT: Never tilt your treadmill using the incline wheels when repositioning or moving your treadmill.  
Only roll/push the treadmill on the floor wheels.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
LEVEL ADJUSTMENT  
Uneven flooring could cause the Spring loaded Knob not to engage and thus prevent the 9.17HRO from  
folding or being able to incline.  
To adjust the level you will need the help of another person, as you will need to tip the treadmill on its side.  
Tip the treadmill to the left/right. You will see the stabilizers. These will need to be screwed either in or out to level  
the treadmill. Repeat for the other side. It may help to use a spirit level when adjusting the level on your treadmill.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
MAINTENANCE  
HOW TO MAINTAIN YOUR TREADMILL:  
Proper maintenance is very important to ensure your treadmill is always in top working condition. Improper  
maintenance could cause damage or shorten the life of your treadmill.  
Important: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer,  
keep liquids away and keep it out of direct sunlight.  
Inspect and tighten all parts of the treadmill regularly. Replace any worn parts immediately.  
BELT ADJUSTMENT:  
The running belt has been properly adjusted at the factory. However transportation, uneven flooring or other  
unpredicted reasons could cause the belt to shift off center resulting in the belt rubbing with the plastic side rail or end  
caps and possibly causing damage. To adjust the belt back to it’s proper position please follow the directions below:  
1. If your belt tends to walk to the right, rotate the right tension bolt clockwise. We recommend adjustments of  
1/4 turn at a time, and follow with a test. If your belt continues to walk to the right, simply adjust the left belt  
tension bolt by turning it 1/4 turn counterclockwise, and follow with a test.  
2. If your belt tends to walk to the left, rotate the left tension bolt clockwise 1/4 turn at a time, and follow with a  
test. If the belt continues to walk to the left, simply adjust the right tension bolt counterclockwise.  
3. If your belt appears to be loose, simply tighten both bolts evenly 1/4 turn. If it appears tight, simply loosen  
both bolts evenly 1/4 turn.  
Right and left tension bolts are located at the rear of the treadmill.  
DECK LUBRICATION:  
The walking belt has been pre-lubricated at the factory. However, it is recommended that the walking board be  
checked periodically for lubrication to ensure optimal treadmill performance. Your treadmill should not have to be  
lubricated usually within the first year or 500 hours of use.  
Every 3 months of operation lift the sides of the walking belt and feel the top surface of the walking board as far as  
you can reach. If you feel signs of silicone, no further lubrication is required. If it feels dry to the touch, follow the  
instructions below.  
Please use a non-petroleum based silicone.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
MAINTENANCE  
To apply lubricant to the walking belt:  
1. Position the walking belt so that the seam is located on top and in center of the walking board.  
2. Insert the spray nozzle into the spray head of the lubricant can.  
3. While lifting the side of the walking belt, position the spray nozzle between the walking belt and the board  
approximately 15 cm (6 inches) from the front of the treadmill. Apply the silicone spray to the walking board,  
moving from the front of the treadmill to the rear. Repeat this on the other side of the belt. Spray  
approximately 4 seconds on each side.  
4. Allow the silicone to "set" for 1 minute before using the treadmill.  
Spray lubricant from front to back.  
CLEANING:  
Routine cleaning of your treadmill will extend the product's life.  
Warning: To prevent electrical shock, be sure the power to the treadmill is OFF and the power cord is  
unplugged from the wall electrical outlet before attempting any cleaning or maintenance.  
Important: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer,  
keep liquids away and keep it out of direct sunlight.  
After each workout: Wipe off the console and other treadmill surfaces with a clean, water dampened soft  
cloth to remove excess perspiration.  
Weekly: Use of a treadmill mat is recommended for ease of cleaning. Dirt from your shoes contacts the  
belt and eventually makes it to underneath the treadmill. Vacuum underneath treadmill once a week.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
WARRANTY  
LIMITED HOME USE WARRANTY – SMOOTH FITNESS Treadmills Warranty  
Warranty Coverage: EVO Fitness and Smooth Fitness, Inc. ("Smooth Fitness") warrants to the original owner that each new  
product to be free from defects in workmanship and material, under normal use and conditions.  
Period of Coverage: The Warranty on this product runs from the date of original purchase using the following schedule:  
Drive  
Model Name  
5.25  
6.25HR  
Frame  
Lifetime  
Lifetime  
Lifetime  
Lifetime  
Lifetime  
Lifetime  
Motor  
Lifetime  
Lifetime  
Lifetime  
Lifetime  
Lifetime  
Lifetime  
Parts & Electronics  
3 years  
Labor  
1 year  
1 year  
1 year  
1 year  
1 year  
1 year  
5 years  
7.1HR PRO  
9.17HRO  
9.25HR  
5 years  
5 years  
5 years  
9.25X  
Lifetime  
Labor: Smooth Fitness will reimburse for labor costs for One (1) year. Smooth Fitness reserves the right to either:  
Hire and reimburse an independent service technician who will come into the home for the repair,  
OR  
In the event that there is not an available certified Smooth Fitness service technician, Smooth will send the part directly to the  
consumer and will pay $75 US per occurrence for the labor costs of such repair. If multiple repair attempts must be made for one  
reported problem, Smooth will only reimburse once per occurrence.  
Smooth Fitness reserves the right to inspect damaged parts for misuse. Your Original Receipt is proof of purchase and should be  
kept with the product manual. You may be required to show proof of purchase prior to warranty service being initiated.  
Remedy Provided by Smooth Fitness: Smooth Fitness will provide a replacement part free of charge if a defect is found during  
the Warranty period. Smooth Fitness may at its discretion, choose to provide any of following parts or repair options. In the event  
that a part is determined in need of replacement, upon receipt of the part by Smooth Fitness, Smooth Fitness may send out the part  
by UPS ground or another such carrier directly to the customer’s home. The customer is responsible for the cost of sending the part  
to Smooth Fitness.  
For the 9.25X Model Only: This warranty covers all parts including frame, electronics and wear parts for a lifetime. If Smooth  
Fitness in its sole discretion determines that the treadmill cannot or should not be repaired, it may decide to purchase the unit for the  
residual value in accordance with the following: 25% of retail purchase price after 5 years, 15% after 10 years, 5% after 15 years.  
Any redemption may be by repair or replacement of the affected parts and/or product at the sole discretion of Smooth Fitness, by  
personnel approved by Smooth Fitness.  
Parts repaired or replaced pursuant to this Warranty shall be warranted for the unexpired portion of the Warranty applying to the  
original product. Any technical advice furnished before or after delivery in regard to the use or application of Smooth Fitness  
products is furnished without charge and on the basis that it represents Smooth Fitness' best judgment under the circumstances but  
that the advice is used at your sole risk.  
Procedure for Obtaining Your Remedy Under This Warranty: To obtain service on a Smooth Fitness product, call Smooth  
Fitness. In the instance that service is not available in an area, Smooth Fitness, at its discretion, can either 1) find a service  
technician in your area to perform warranty service, 2) have a local dealer perform warranty service, or 3) send the warranty parts to  
you and reimburse as described above. To help the technician assist you, please have the following information ready:  
Model name or number from the cover of the manual;  
Serial number located on the frame of the unit; and  
The part description and the order number.  
Limitations on Warranty: This Warranty will only apply to the original end user. This Warranty does not cover wear and tear  
(except the 9.25X treadmill), any problems, damages or failures that are caused by accident, improper assembly, failure to observe  
cautionary labels on the product, failure to operate the product correctly, power grid failures or spikes from your local electricity  
provider, abuse or freight damage. Smooth Fitness does not warrant against any damage or defects that may result from repair or  
alterations made to the product by an unauthorized repair facility.  
This Warranty shall terminate if you sell or otherwise transfer this product. This Warranty does not apply to any product shipped or  
handled outside of the United States or Canada. This Warranty does not apply if the product is used as a rental product or in  
commercial use. Consequential and incidental damages are not recoverable under this Warranty. (Some states do not allow  
the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.)  
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER EXPRESS WARRANTIES. ALL IMPLIED WARRANTIES,  
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, ARE LIMITED IN  
DURATION TO ONE (1) YEAR FROM THE EFFECTIVE DATE OF THIS WARRANTY. SMOOTH FITNESS IS NOT  
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM ANY DEFECT IN PARTS NOR FOR  
ANY BREACH OF EXPRESS OR IMPLIED WARRANTIES. SMOOTH FITNESS' SOLE LIABILITY UNDER THIS  
WARRANTY IS LIMITED TO THE TERMS DESCRIBED IN THIS FORM. THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.  
FORM WS-1 (rev. 08/2005)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
IMPORTANT STEPS  
Warning:  
Before using this product, please consult your personal physician for a complete physical examination. Frequent and  
strenuous exercise should be approved by your doctor first. If any discomfort should result from your use of this  
product, stop exercising and consult your doctor. Proper usage of this product is essential. Please read your manual  
carefully before exercising.  
Please keep all children away from the equipment during use and when equipment is unattended.  
Always wear appropriate clothing, including athletic shoes, when exercising. Do not wear loose clothing that could  
become caught during exercising.  
Make sure that all bolts and nuts are tightened when equipment is in use. Periodic maintenance is required on all  
exercise equipment to keep it in good condition.  
Before beginning:  
How you begin your exercise program depends on your physical condition. If you have been inactive for several  
years, or are severely overweight, you must start slowly and increase your time gradually, a few minutes per week.  
Initially you may be able to exercise only for a few minutes in your target heart rate zone. However, your aerobic  
fitness will improve over the next six to eight weeks. Don’t be discouraged if it takes longer. It’s important to work at  
your own pace. Ultimately, you’ll be able to exercise continuously for 30 minutes. And the better your aerobic  
fitness, the harder you will have to work to stay in your target heart rate zone. But remember these essentials:  
Contact your physician before starting a workout or training program. Have your doctor review your training  
and diet programs to advise you of a workout routine you should adopt.  
Begin your training program slowly with realistic goals that have been set by you and your doctor.  
Supplement your program with some type of aerobic exercise such as walking, jogging, swimming, dancing  
and/or bicycling. Monitor your pulse frequently. If you do not have an electronic heart rate monitor, have  
your physician show you the proper way to manually check your pulse by using your wrist or neck.  
Establish your target heart rate based on your age and condition.  
Drink plenty of fluids during the course of your routine. You must replace the water content lost from  
excessive exercising to avoid dehydration. Avoid drinking large amounts of cold liquids. Fluids should be at  
room temperature when consumed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
TARGET HEART RATE  
Finding your pulse:  
To make sure your heart is beating in its target zone, you’ll need to know how to monitor your heart rate. The easiest  
way is to feel the pulse in the carotid artery on either side of your neck, between the windpipe and the large neck  
muscles. Count the number of beats in ten seconds, and then multiply that number by six. This gives you the  
number of beats per minute.  
How fast should your heart beat during aerobic exercise? Fast enough to reach and stay in its “target zone,” a range  
of beats per minute that is largely determined by your age and physical condition. To determine your target zone,  
consult the chart we have provided.  
FIND YOUR TARGET HEART RATE  
200  
180  
160  
140  
120  
100  
80  
20  
25  
30  
35  
40  
45  
50  
55  
60  
65  
70  
AGE IN YEARS  
ADVANCED: Sports, athletic conditioning or interval training  
FITNESS: Optimal training, aerobic or cardiovascular  
HEALTH: Beginner, low intensity with long duration produces fat burning  
Aerobic exercise:  
Is any sustained activity that sends oxygen to your muscles via your heart and lungs. It will improve the fitness of  
your lungs and heart: your body’s most important muscle. Aerobic fitness is promoted by any activity that uses your  
large muscle groups - arms, legs or buttocks, for example. Your heart beats quickly and you breathe deeply. An  
aerobic exercise should be part of your entire exercise routine.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
MUSCLE CHART  
Targeted muscle groups:  
The exercise routine that is performed on this product will develop primarily lower body muscle groups. These  
muscle groups are shown in gray color on the chart below.  
Shoulder muscles  
Bicep muscle  
A
C
E
G
I
B
D
F
H
J
Pectoral muscles  
Abdominal muscles  
Quadricep muscles  
Trapezius muscles  
Back muscles  
Forearm muscles  
Calf muscles  
Tricep muscles  
Gluteal muscles  
K
L
Hamstring muscles  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
STRETCHING ROUTINE  
Warm up and cool down:  
A successful exercise program consists of a warm-up, aerobic exercise, and a cool-down. Do the entire program at  
least two or three times a week, resting for a day between workouts. After several months, you can increase your  
workouts to four or five times per week.  
Warming up is an important part of your workout, and should begin every session. It prepares your body for more  
strenuous exercise by heating up and stretching out your muscles, increasing your circulation and pulse rate, and  
delivering more oxygen to your muscles. At the end of your workout, repeat these exercises to reduce sore muscle  
problems. We suggest the warm-up and cool-down exercises on the following pages:  
Toe Touch:  
Slowly bend forward from your waist, letting your back and shoulders relax as you  
stretch toward your toes. Reach down as far as you can and hold for 15 counts.  
Shoulder Lift:  
Lift your right shoulder up toward your ear for one count. Then lift your left  
shoulder up for one count as you lower your right shoulder.  
Head Roll:  
Rotate your head to the right for one count, feeling the stretch up the left side of  
your neck. Next, rotate your head back for one count, stretching your chin to the  
ceiling and letting your mouth open. Rotate your head to the left for one count,  
and finally, drop your head to your chest for one count.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
STRETCHING ROUTINE  
Hamstring Stretch:  
Sit with your right leg extended. Rest the sole of your left foot against  
your right inner thigh. Stretch toward your toe as far as possible. Hold  
for 15 counts. Relax and then repeat with left leg extended.  
Inner Thigh Stretch:  
Sit with the soles of your feet together with your knees pointing outward.  
Pull your feet as close into your groin as possible. Gently push your  
knees towards the floor. Hold for 15 counts.  
Side Stretch:  
Open your arms to the side and continue lifting them until they are over  
your head. Reach your right arm as far upward toward the ceiling as you  
can for one count. Feel the stretch up your right side. Repeat this action  
with your left arm.  
Calf-Achilles Stretch:  
Lean against a wall with your left leg in front of the right and your  
arms forward. Keep your right leg straight and the left foot on the  
floor; then bend the left leg and lean forward by moving your hips  
toward the wall. Hold, and then repeat on the other side for 15  
counts.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
SMOOTH 9.17HRO MOTORIZED TREADMILL  
TROUBLESHOOTING  
Troubleshooting  
NOTE: Do not touch any internal electric wires without consulting the manufacturer.  
Treadmill will not start:  
1. Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a properly  
grounded outlet and the surge protector is turned on (refer to the Power Requirements section in this manual).  
2. Check the circuit breaker reset switch located on the front of the treadmill. Turn the power off, wait 5 minutes  
then press the rest switch.  
3. Check the house electrical breaker box and the circuit breaker for the room the treadmill is located in. If it has  
tripped, reset or have an electrician replace the breaker in home.  
4. Have an electrician check for inadequate voltage at the outlet.  
Treadmill looses power during use:  
1. Check the circuit breaker reset switch located on the front of the treadmill. Turn the power off, wait 5 minutes  
then press the rest switch.  
If the treadmill still will not operate, please call Technical service at 1.888.800.1167.  
2. Check the house electrical breaker box and the circuit breaker for the room the treadmill is located in. If it has  
tripped, reset or have an electrician replace the breaker in home.  
Treadmill walking belt slows during use:  
1. Check to make sure the treadmill is securely plugged into an UL-listed surge protector, rated at 15 amps, with a  
14-guage cord of five feet or less and the surge protector is securely plugged into the outlet. If the treadmill still will  
not operate, please call Technical service at 1.888.800.1167.  
Treadmill walking belt slips or is not centered on rear roller:  
Refer to the Belt Adjustment section of this manual. If you require additional assistance please call Technical  
service at 1.888.800.1167.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Smooth Fitness  
112 Gaither Drive  
Mt. Laurel, NJ 08054  
Toll Free Customer Service:  
1.888.800.1167  
Website:  
Copyright © 2003  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Shindaiwa Edger 81645 User Manual
Shoprider Mobility Aid UL8WPB User Manual
Shure Microphone PG56 User Manual
Sony Car Stereo System CDXGT130 User Manual
Sony Digital Camera DSC H3 User Manual
Sony Personal Computer VPCZ1300C User Manual
Sterling Marine Instruments S 8418 User Manual
Sub Zero Door 3756430 User Manual
Sungale Tablet ID430WTA User Manual
TANDBERG Digital Photo Frame D11624 User Manual