Smooth Fitness Treadmill 915HR User Manual

USER’S MANUAL  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
MODEL NUMBER: 9.15HR  
USER WEIGHT LIMITATION: 300lbs.  
TOLL FREE CUSTOMER SERVICE NUMBER: 1.888.800.1167  
SERIAL NUMBER (found on frame):  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
SMOOTH 9.15HR POWER FOLDING TREADMILL  
POWER REQUIREMENTS  
Power Requirements:  
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN A RISK OF AN  
ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO  
WHETHER THE PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE  
PRODUCT, IF IT WILL NOT FIT THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.  
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges  
and noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the  
possibility of treadmill damage, always use a surge protector (not included) with your treadmill.  
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector  
with a UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less  
and an electrical rating 120VAC, 15 amps.  
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for  
electric current, should the treadmill malfunction. This treadmill comes with an electrical cord having an equipment-grounding  
conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an  
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.  
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug illustrated in the  
drawing below.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
SMOOTH 9.15HR POWER FOLDING TREADMILL  
PREASSEMBLY  
Open the boxes:  
You are now ready to open the boxes of your new equipment. Make sure to inventory all of the parts that are included in the  
boxes. Check the Hardware Comparison Chart for a full count of the number of parts included for this product to be  
assembled properly. If you are missing any parts or have any assembly questions call your local Smooth Retailer.  
Gather your tools:  
Before starting the assembly of your unit, make sure that you have gathered all the necessary tools you may require to  
assemble the unit properly. Having all of the necessary equipment at hand will save time and make the assembly quick and  
hassle-free.  
Clear your work area:  
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is free  
from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a comfortable  
amount of free area around the unit for unobstructed operation.  
Invite a friend:  
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another person  
when assembling this product.  
User Weight Limitation:  
Please note that there is a weight limitation for this product. If you weigh more than 300lbs. it is not recommended that  
you use this product. Serious injury may occur if the user’s weight exceeds the limit shown here. This product is not  
intended to support users whose weight exceeds this limit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
SMOOTH 9.15HR POWER FOLDING TREADMILL  
HARDWARE COMPARISON CHART  
Hardware chart:  
For your convenience, we have identified the hardware used in the assembly of this product. This chart is provided to help  
you identify those items that may be unfamiliar to you.  
NO. DESCRIPTION  
QTY.  
17  
40  
46  
52  
55  
70  
A
ALLEN HEAD BOLT  
METAL CAP  
8
2
2
2
4
4
1
1
1
BOLT  
M5 x 20mm SCREW  
M4 x 15mm SCREW  
M4 x 20mm SCREW  
SCREWDRIVER  
ALLEN WRENCH  
WRENCH  
B
C
MILLIMETERS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
SMOOTH 9.15HR POWER FOLDING TREADMILL  
PARTS LIST  
No. Description  
Qty. Order No.  
No. Description  
Qty. Order No.  
1
1
1
1
1
1
1
1
1
1
2
1
3
2
2
1
8
2
1
1
1
1
1
1
1
2
2
1
1
2
9.15HR-01  
9.15HR-02  
9.15HR-03  
9.15HR-04  
9.15HR-05  
9.15HR-06  
9.15HR-07  
9.15HR-08  
9.15HR-09  
9.15HR-11  
9.15HR-12  
9.15HR-13  
9.15HR-14  
9.15HR-15  
9.15HR-16  
9.15HR-17  
9.15HR-18  
9.15HR-19  
9.15HR-20  
9.15HR-21  
9.15HR-22  
9.15HR-23  
9.15HR-24  
9.15HR-25  
9.15HR-26  
9.15HR-27  
9.15HR-28  
9.15HR-29  
9.15HR-30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50A  
50B  
51  
52  
53  
54  
55  
56  
57  
58  
2
9.15HR-31  
9.15HR-32  
9.15HR-33  
9.15HR-34  
9.15HR-35  
9.15HR-36  
9.15HR-37  
9.15HR-38  
9.15HR-39  
9.15HR-40  
9.15HR-41  
9.15HR-42  
9.15HR-43  
9.15HR-44  
9.15HR-45  
9.15HR-46  
9.15HR-47  
9.15HR-48  
9.15HR-49  
9.15HR-50A  
9.15HR-50B  
9.15HR-51  
9.15HR-52  
9.15HR-53  
9.15HR-54  
9.15HR-55  
9.15HR-56  
9.15HR-57  
9.15HR-58  
BASE FRAME  
SIDE RAIL GRIP  
DECK SCREW  
2
10  
10  
2
POWER SWITCH  
3
COMPUTER SUPPORT  
DRIVING TUBE  
DECK RUBBER CUSHION  
TRANSPORT WHEEL  
REAR WHEEL  
4
5
4
WHEEL SUPPORT  
RIGHT HANDLE UPRIGHT  
LEFT HANDLE UPRIGHT  
BASE FRAME  
6
1
RUNNING BELT  
7
1
POWERFOLD SWITCH  
REAR WHEEL SCREW  
CONSOLE  
8
2
9
1
ELEVATION SUPPORT  
DRIVING ROD  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
2
METAL CAP  
HANDLEBAR FRONT END  
CAP LEFT #1  
HANDLEBAR FRONT END  
CAP RIGHT #1  
HANDLEBAR FRONT END  
CAP LEFT #2  
1
MOTOR BELLY PAN  
16 X 35.5MM SHAFT  
HAND PULSE SENSORS  
DECK/BASE SCREW  
SPRING LOADED KNOB  
ALLEN HEAD BOLT  
CONSOLE SUPPORT SCREW  
DRIVING DC MOTOR  
MOTOR HOLDER  
1
1
HANDLEBAR FRONT END  
CAP RIGHT #2  
1
1
UPRIGHT CROSS BRACE  
BOLT  
2
1
SAFETY KEY  
1
ELEVATION MOTOR  
SUPPORT BRACKET COVER  
HANDLEBAR (RIGHT)  
2
1
MOTOR DRIVE BELT  
ROLLER FLYWHEEL  
MOTOR FLYWHEEL  
FRONT ROLLER  
1
HANDLEBAR (LEFT)  
CONSOLE SUPPORT  
LOCATING SCREW  
1
2
CONSOLE SCREW  
PIVOT BRACKET SCREW  
PIVOT BRACKET  
4
REAR ROLLER  
2
TRANSPORT WHEEL BOLT  
HANDLEBAR GRIP  
MOTORHOOD  
32  
1
M4 X 15 SCREW  
FRONT SHROUD  
1
RUNNING DECK  
DECK REAR END CAP - LEFT  
DECK REAR END CAP -  
RIGHT  
1
M8 X 43 CARRIAGE BOLT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
SMOOTH 9.15HR POWER FOLDING TREADMILL  
PARTS LIST  
No. Description  
Qty. Order No.  
No. Description  
Qty. Order No.  
HANDLEBAR END CAP (RIGHT &  
LEFT)  
BASE FRAME END CAP (FRONT &  
REAR)  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
2
4
4
4
4
1
1
1
1
2
2
4
8
16  
2
2
1
1
1
2
1
1
1
9.15HR-59  
9.15HR-60  
9.15HR-61  
9.15HR-62  
9.15HR-63  
9.15HR-64  
9.15HR-65  
9.15HR-66  
9.15HR-67  
9.15HR-68  
9.15HR-69  
9.15HR-70  
9.15HR-71  
9.15HR-72  
9.15HR-73  
9.15HR-74  
9.15HR-75  
9.15HR-76  
9.15HR-77  
9.15HR-78  
9.15HR-79  
9.15HR-80  
9.15HR-81  
LEVEL ADJUSTER  
SCREW  
M8 LOCK NUT  
ALLEN HEAD BOLT  
MOTOR BOTTOM TRAY  
RUNNING DECK BELLY PAN  
ELEVATION MOTOR COVER  
TENSION BOLT  
FRONT SHROUD SCREW  
M4 X 20 SCREW  
SPACER  
SPACER SCREW  
REAR WHEEL NUT  
NUT  
POWER CORD  
POWER BOARD  
MOTOR CONTROL BOARD  
REED SWITCHES  
COIL  
ELEVATION MOTOR CONTROL  
BOARD  
CHEST BELT PULSE SENSOR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
SMOOTH 9.15HR POWER FOLDING TREADMILL  
PARTS DIAGRAM  
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
SMOOTH 9.15HR POWER FOLDING TREADMILL  
PARTS DIAGRAM  
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
PARTS DIAGRAM  
A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
ASSEMBLY  
STEP 1:  
Remove your 9.15HR Treadmill from the carton and place it on the floor in an open area as shown in FIG-1.  
NOTE: When attaching the Handle Uprights (6 and 7) to the Base Frame (1) you will need the help of a friend.  
First make sure to connect the wires. Then, simply have one person hold the Handle Uprights (6 and 7) in place on the Base  
Frame (1) while the other secures it with Allen Bolts (17).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
ASSEMBLY  
STEP 2:  
Remove the Screw (51) then rotate the Computer Support (3) up to the correct position as shown and secure with the  
Screw (51).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
ASSEMBLY  
STEP 3:  
Rotate the Computer (39) up to its proper angle and secure with Screws (52) as shown in FIG-2.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
ASSEMBLY  
STEP 4:  
Attach the Upright Cross Brace (45) to the Left and Right Handle Uprights (6 and 7) and secure with Steel Caps (40) and  
Bolts (46). Secure the Computer Support (3) to the Right and Left Handle Uprights (6 and 7) by tightening the Screws (18).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
ASSEMBLY  
STEP 5:  
Connect the sensor wires. Next attach the Handlebars (50) to the Right and Left Handle Uprights (6 and 7) and secure using  
Allen Head Bolts (17).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
ASSEMBLY  
STEP 6:  
Mount the Handle Cover Right - 1 (42) and the Handle Cover Right - 2 (44) to the Right Handle Upright (6) and secure with  
the Screws (55) and Screws (70). Mount the Handle Cover Left - 1 (43) and the Handle Cover Left - 2 (41) to the Left Handle  
Upright (7) and secure with the Screws (55) and Screws (70).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
FOLDING INSTRUCTIONS  
FOLLOW THESE INSTRUCTIONS TO FOLD UP YOUR 9.15HR TREADMILL:  
1. Press STOP on the console and wait until the  
belt has fully stopped.  
2. Press RESET on the console. This will  
ensure that the deck is in its lowest position  
and enable it to fold. The 9.15HR won’t fold  
unless the deck is in its lowest position. The  
treadmill must be plugged in for this to work.  
3. Turn the SPRING KNOB CLOCKWISE until  
it is fully engaged. A “CLICK” can be felt at  
this point.  
4. Push the POWER FOLD SWITCH, located  
on the front of the LEFT UPRIGHT (7). The  
deck will now start to fold. Keep holding this  
switch until the deck has fully folded.  
5. Turn off the power and unplug the treadmill  
before you leave it. DO NOT LEAVE THE  
TREADMILL UNATTENDED AND  
PLUGGED IN AT ANY TIME.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
UNFOLDING INSTRUCTIONS  
FOLLOW THESE INSTRUCTIONS TO UNFOLD YOUR 9.15HR TREADMILL:  
Before unfolding the 9.15HR plug the  
treadmill in and insert the SAFETY KEY  
and the console will light up.  
1. Push the POWER FOLD  
SWITCH “DOWN”. The deck will  
now start to DESCEND. Keep  
holding the switch until the deck  
has fully descended.  
2. Turn the SPRING KNOB  
COUNTER CLOCKWISE until it  
DISENGAGES. If you do not do  
this the deck will not elevate or  
incline while being used.  
Transporting your treadmill:  
IMPORTANT: NEVER TILT YOUR  
TREADMILL USING THE INCLINE  
WHEELS WHEN REPOSITIONING OR  
MOVING YOUR TREADMILL. ONLY  
ROLL/PUSH TREADMILL ON THE  
FLOOR WHEELS.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
LEVEL ADJUSTMENT  
Leveling the treadmill:  
Uneven flooring could cause the SPRING KNOBS not to engage and thus prevent the 9.15HR either not folding or unable to  
incline. You will need someone to help you with this procedure, as you will need to tip the treadmill on its side.  
To adjust the level first fold up the treadmill as per the instructions on the FOLDING INSTRUCTIONS page of this manual. If  
your treadmill will not fold, please see the TROUBLE SHOOTING page of this manual.  
Tip the 9.15HR to the left/right. You will then see the LEVEL ADJUSTERS. These will need to be screwed either in or out to  
level the treadmill. Repeat for the other side. It may help to use a spirit level when adjusting the level on your treadmill.  
When you are finished unfold the treadmill and unlock the SPRING KNOB.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
COMPUTER OPERATION  
Heart Rate  
Preset Programs  
Incline/Age  
A
C
E
G
B
D
F
Time/Distance  
Calories/Calories Per Hour  
Preset Programs  
Safety Key  
Message Center  
H
POWER ON  
Set the POWER SWITCH, located on the base frame, to ON and insert the SAFETY KEY. All the LED lights will auto scan.  
SLEEP MODE  
The computer will automatically enter SLEEP MODE if left idle for 5 minutes without any input in POWER ON status. Press  
any button to return to POWER ON status when the computer is in the SLEEP MODE.  
ENGLISH / METRIC CONVERSION  
To switch the computer display information from English (miles, pounds, inches) to Metric, set the POWER SWITCH, located  
on the base frame, to ON. Press and hold the ENTER button. Insert the SAFETY KEY. The computer will sound one short  
BEEP, the English LED light will turn off and the Metric LED will light up. Repeat the same procedure to switch between the  
Metric and English. Press the STOP button to confirm the change and return to POWER ON status.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
COMPUTER OPERATION  
COOL DOWN  
For every program, there is a preset COOL DOWN feature at the end of each program. When the program is complete, the  
speed will return to 2MPH/3.2KMH, the incline level will return to level 0 and the time will countdown 1 minute. After the timer  
1 minute countdown is complete, the treadmill will stop and return to POWER ON status after 30 seconds. If you wish to  
return to POWER ON status faster than 30 seconds, press the STOP button at any time.  
QUICK START  
In POWER ON status, press the START button to QUICK START. The Speed starts from 0.5MPH/0.8KMPH and the Incline  
Level starts from 0. Press the SPEED UP/DOWN buttons to change the Speed. Press the INCLINE UP/DOWN buttons to  
change the incline level.  
During the exercise press STOP to pause the program. The Speed and Incline Level return to the beginning levels while the  
other information (Time, Distance, Calories) is paused. To recall values and resume exercising press START. Pressing the  
STOP button again within 30 seconds returns all data to zero and the computer returns to POWER ON status. If no buttons  
are pressed within 30 seconds the computer automatically returns to POWER ON status and all data returns to zero.  
GOAL COURSE TIME  
When the computer is in POWER ON status press the  
button on the console. The LED on  
button will light up. If no  
buttons are pressed after this within 3 minutes the program will return to POWER ON status. If you wish to return to POWER  
ON status, press the STOP button any time.  
The TIME LED will light up, show the preset time as 15:00 and blink. After press the  
button. Press the INCLINE  
UP/DOWN buttons to set your ideal workout time then press the START button to start. After pressing the START button the  
TIME counts down from the preset time. The other information counts up until the treadmill stops. The Speed starts from  
2MPH/3.2KMPH and the incline starts from level 0. Press the SPEED UP/DOWN buttons to adjust the speed. Press the  
INCLINE UP/DOWN buttons to adjust the incline level.  
During exercise press STOP to pause the program. Speed and Incline Level return to the beginning levels while the other  
information (Time, Distance, Calories) is paused. To recall values and resume exercising press START. Pressing the STOP  
button again within 30 seconds returns all data to zero and the computer returns to POWER ON status. If no buttons are  
pressed within 30 seconds the computer automatically returns to POWER ON status and all data returns to zero.  
GOAL COURSE DISTANCE  
When the computer is in POWER ON status press the  
button on the console. The LED on  
button lights up. If no  
buttons are pressed within 3 minutes the program will return to POWER ON status. If you wish to return to POWER ON  
status, press the STOP button any time.  
The DISTANCE LED will light up, show the preset distance as 3MI/5KM and begin blinking. After press the  
the INCLINE UP/DOWN buttons to set up the ideal distance then press the START button to start. After pressing the START  
button the DISTANCE counts down from the preset distance. The other information counts up until the treadmill stops. The  
Speed starts from 2MPH/3.2KMPH and incline starts from level 0. Press the SPEED UP/DOWN buttons to adjust the speed.  
Press the INCLINE UP/DOWN buttons to adjust the incline level.  
button. Press  
During exercise press STOP to pause the program. Speed and Incline Level return to the beginning levels while the other  
information (Time, Distance, Calories) is paused. To recall values and resume exercising press START. Pressing the STOP  
button again within 30 seconds returns all data to zero and the computer returns to POWER ON status. If no buttons are  
pressed within 30 seconds the computer automatically returns to POWER ON status and all data returns to zero.  
GOAL COURSE CALORIES  
When the computer is in POWER ON status press the  
button on the console. The LED  
button lights up. If no buttons  
are pressed within 3 minutes the program will return to POWER ON status.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
COMPUTER OPERATION  
If you wish to return to POWER ON status, press the STOP button any time.  
The CALORIES LED will light up and show the preset calories burned as 050 and blinking. After press the  
button. Press  
the INCLINE UP/DOWN buttons to set up the desired calories then press the START button to start. After pressing the STAR  
button the CALORIES count down from the preset calories. The other information counts up until the treadmill stops. The  
Speed starts from 2MPH/3.2KMPH and the incline starts from level 0. Press the SPEED UP/DOWN buttons to adjust the  
speed. Press the INCLINE UP/DOWN buttons to adjust the incline level.  
During exercise press STOP to pause the program. The Speed and Incline Level return to the beginning levels while the  
other information (Time, Distance, Calories) is paused. To recall values and resume exercising press START. Pressing the  
STOP button again within 30 seconds returns all data to zero and the computer returns to POWER ON status. If no buttons  
are pressed within 30 seconds the computer automatically returns to POWER ON status and all data returns to zero.  
20 MINUTE FAST RUN  
When the computer is in POWER ON status press the  
buttons are pressed within 3 minutes the program will return to POWER ON status. At this time the LED  
button on the console then press START to start the program. If n  
button will light  
up. The Time counts down from 20:00. The other information will count up until the treadmill stops. The SPEED and INCLIN  
level follow the preset program.  
During exercise press STOP to pause the program. The Speed and Incline Level will return to the beginning levels while the  
other information (Time, Distance, Calories) is paused. To recall values and resume exercising press START. Pressing the  
STOP button again within 30 seconds returns all data to zero and the computer returns to POWER ON status. If no buttons  
are pressed within 30 seconds the computer automatically returns to POWER ON status and all data returns to zero.  
During the exercise changes in both SPEED and INCLINE follow the preset program. You can still press the SPEED  
UP/DOWN and INCLINE UP/DOWN to change the program. Any change only effects the current workout period. The  
computer does not record any changes for future use on this program.  
40 MINUTE JOG  
When the computer is in POWER ON status press the  
button on the console then press the START button to start the  
program. If no buttons are pressed within 3 minutes the program will return to POWER ON status. At this time the LED  
button will light up. The TIME counts down from 40:00, and the other information will count up until the treadmill stops. The  
SPEED and INCLINE levels follow the preset program.  
During exercise press the STOP to pause the program. Speed and Incline Level return to the beginning levels while the other  
information (Time, Distance, Calories) is paused. To recall values and resume exercising press START. Pressing the STOP  
button again within 30 seconds returns all data to zero and the computer returns to POWER ON status. If no buttons are  
pressed within 30 seconds the computer automatically returns to POWER ON status and all data returns to zero.  
During the exercise changes in both SPEED and INCLINE follow the preset program. You can still press the SPEED  
UP/DOWN and INCLINE UP/DOWN to change the program. Any change only effects the current workout period. The  
computer does not record any changes for future use on this program.  
60 MINUTE WALK  
When the computer is in POWER ON status press the  
button on the console then press the START button to start the  
program. If no buttons are pressed within 3 minutes the program will return to POWER ON status. At this time the LED  
button will light up. The TIME counts down from 60:00, and the other information will count up until the treadmill stops. The  
SPEED and INCLINE level follow the preset program.  
During exercise press STOP to pause the program. The Speed and Incline Level will return to the beginning levels while the  
other information (Time, Distance, Calories) is paused. To recall values and resume exercising press START. Pressing the  
STOP button again within 30 seconds returns all data to zero and the computer returns to POWER ON status. If no buttons  
are pressed within 30 seconds the computer automatically returns to POWER ON status and all data returns to zero.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
COMPUTER OPERATION  
During the exercise changes in both SPEED and INCLINE follow the preset program. You can still press the SPEED  
UP/DOWN and INCLINE UP/DOWN to change the program. Any change only effects the current workout period. The  
computer does not record any changes for future use on this program.  
ACTIVATE HEART RATE CONTROL  
After WORKOUT TIME SET UP, press the START button to activate the HEART RATE CONTROL program. The Time will  
count down from the preset time and, the other information will count up until the treadmill stops. The SPEED starts from  
2MPH/3.2KM and the INCLINE starts from Level 0. The computer will sensor the actual heart rate and adjust the incline level  
every minute. When the actual heart rate is lower than the standard (Preset) heart rate, the incline will be elevated up one  
level. When the actual heart rate is maintained between the standard heart rate and maximum heart rate, the incline level wil  
not change. When the actual heart rate is over the maximum heart rate, the incline level will be lowered one level.  
During exercise press STOP to pause the program. The Speed and Incline Level will return to their beginning levels while  
the other information (Time, Distance, Calories) is paused. To recall values and resume exercising press START. Pressing  
the STOP button again within 30 seconds returns all data to zero and the computer returns to POWER ON status. If no  
buttons are pressed within 30 seconds the computer automatically returns to POWER ON status and all data returns to zero.  
USING THE CHEST BELT HEART RATE MONITOR:  
For proper operation, the chest belt should be worn with the monitor strapped across the front of your body just above the  
chest line as shown in the drawing on the right. The monitor needs a little body heat and moisture in order to work properly.  
To ensure correct operation you may want to wet the two rubber pickups under the belt prior to exercising.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
MAINTENANCE  
HOW TO MAINTAIN THE 9.15HR TREADMILL:  
Proper maintenance is very important to ensure your treadmill is always in top working condition. Improper maintenance  
could cause damage or shorten the life of your treadmill and exceed the LIMITED WARRANTY coverage.  
?? Important: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep liquids  
away and keep it out of direct sunlight.  
?? Inspect and tighten all parts of the treadmill regularly. Replace any worn parts immediately.  
BELT ADJUSTMENT:  
Belt adjustment and tension performs two functions: adjustment for tension and centering. The running belt has been  
adjusted properly at the factory. However transportation, uneven flooring or other unpredicted reasons could cause the belt to  
shift off center resulting in the belt rubbing with the plastic side rail or end caps and possibly causing damage. To adjust the  
belt back to it’s proper position please follow the directions below:  
?? Walking belt has shifted to the left: First unplug the power cord from the surge protector. Using the hex key  
provided, turn the left rear roller adjustment bolt 1/4 turn in the clockwise direction. Plug the power cord back into  
the surge protector and run the treadmill at 2.5 mph. You should see the belt start to correct itself, moving back  
towards the center. Repeat the above procedure until the walking belt is centered. It may be necessary to set  
walking belt tension once you have completed this procedure if the belt feels like it is slipping while walking. Refer  
below to the "Walking belt slipping" instructions.  
?? Walking belt has shifted to the right: First unplug the power cord from the surge protector. Using the hex key  
provided, turn the right rear roller adjustment bolt 1/4 turn in the clockwise direction. Plug the power cord back into  
the surge protector and run the treadmill at 2.5 mph. You should see the belt start to correct itself, moving back  
towards the center. Repeat the above procedure until the walking belt is centered. It may be necessary to set  
walking belt tension once you have completed this procedure if the belt feels like it is slipping while walking. Refer  
below to the "Walking belt slipping" instructions.  
?? Walking belt is slipping: First unplug the power cord from the surge protector. Using the hex key provided, turn  
both the left and right rear roller adjustment bolts the same distance, usually a 1/4 turn in the clockwise direction.  
Plug the power cord back into the surge protector and run the treadmill at 2.5 mph. You should now walk on the belt  
to determine if the belt is still slipping. Repeat the above procedure until the walking belt is not slipping. The tension  
should be just tight enough not to slip.  
WARNING! Do not over tighten rollers! This will cause premature roller bearing failure!  
Right and left tension bolts are located at the rear of the treadmill.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
MAINTENANCE  
CLEANING:  
Routine cleaning of your treadmill will extend the product's life.  
?? Warning: To prevent electrical shock, be sure the power to the treadmill is OFF and the power cord is unplugged  
from the wall electrical outlet before attempting any cleaning or maintenance.  
?? Important: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep liquids  
away and keep it out of direct sunlight.  
?? After each workout: Wipe off the console and other treadmill surfaces with a clean, water dampened soft cloth to  
remove excess perspiration.  
?? Weekly: Use of a treadmill mat is recommended for ease of cleaning. Dirt from your shoes contacts the belt and  
eventually makes it to underneath the treadmill. Vacuum underneath treadmill once a week.  
DECK LUBRICATION:  
The walking belt has been pre-lubricated at the factory. However, it is recommended that the walking board be checked  
periodically for lubrication to ensure optimal treadmill performance. Your treadmill should not have to be lubricated usually  
within the first year or 500 hours of use. Call your local Smooth dealer for service or questions regarding EVO products.  
Every 3 months or 30 hours of operation lift the sides of the walking belt and feel the top surface of the walking board as far  
as you can reach. If you feel signs of silicone, no further lubrication is required. If it feels dry to the touch, follow the  
instructions below.  
Please use Lube 'N Walk (can be purchased from your dealer or call the number on the front of the manual), or a non-  
petroleum based silicone such as "Napa 8300" (available at most stores).  
To apply lubricant to the walking belt:  
1. Position the walking belt so that the seam is located on top and in center of the walking board.  
2. Insert the spray nozzle into the spray head of the lubricant can.  
3. While lifting the side of the walking belt, position the spray nozzle between the walking belt and the board  
approximately 6" from the front of the treadmill. Apply the silicone spray to the walking board, moving from the front  
of the treadmill to the rear. Repeat this on the other side of the belt. Spray approximately 4 seconds on each side.  
4. Allow the silicone to "set" for 1 minute before using the treadmill.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
WARRANTY  
Warranty Coverage: Smooth Fitness, Inc. ("Smooth Fitness") warrants to the original purchaser that each new product to be  
free from defects in workmanship and material, under normal use and conditions.  
Period of Coverage: The Warranty on this product runs from the date of your purchase for a period of LIFETIME on the  
frame, ten (10) years on the motor, five (5) years on the belt, deck and rollers, three (3) years on electronics, and includes  
one (1) year labor. Smooth Fitness reserves the right to inspect damaged parts for misuse.  
It is recommended that the Original Receipt be kept with the product manual.  
Remedy Provided by Smooth Fitness: Smooth Fitness will provide a replacement part free of charge if a defect is found  
during the Warranty period. You must pay any charges for shipping and handling outside of the Continental United States  
and for labor. To obtain service call your local Smooth Retailer.  
Any redemption may be by repair or replacement of the affected parts and/or product at the sole discretion of Smooth  
Fitness, by personnel approved by Smooth Fitness. If repairs are required, the unit will be repaired at the location of use or  
by return to the factory as deemed appropriate by Smooth Fitness.  
Parts repaired or replaced pursuant to this Warranty shall be warranted for the unexpired portion of the Warranty applying to  
the original product. Any technical advice furnished before or after delivery in regard to the use or application of Smooth  
Fitness products is furnished without charge and on the basis that it represents Smooth Fitness' best judgment under the  
circumstances but that the advice is used at your sole risk.  
Procedure for Obtaining Your Remedy Under This Warranty: To obtain service call your local Smooth Retailer. To help  
them assist you, please have the following information ready:  
Model name or number from the cover of the manual;  
Serial number located on the frame of the unit; and  
The part description and the order number.  
Limitations on Warranty: This Warranty will only apply to the original end user. This Warranty does not cover any  
problems, damages or failures that are caused by accident, improper assembly, failure to observe cautionary labels on the  
product, failure to operate the product correctly, abuse or freight damage. Smooth Fitness does not warrant against any  
damage or defects that may result from repair or alterations made to the product by an unauthorized repair facility.  
This Warranty shall terminate if you sell or otherwise transfer this product. This Warranty does not apply to any product  
shipped or handled outside of the United States or Canada. This Warranty does not apply if the product is used for rental or  
commercial use. Consequential and incidental damages are not recoverable under this Warranty. (Some states do not allow  
the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.)  
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER EXPRESS WARRANTIES. ALL IMPLIED WARRANTIES,  
INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, ARE LIMITED IN  
DURATION TO ONE (1) YEAR FROM THE EFFECTIVE DATE OF THIS WARRANTY. SMOOTH FITNESS IS NOT  
LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM ANY DEFECT IN PARTS NOR FOR  
ANY BREACH OF EXPRESS OR IMPLIED WARRANTIES. SMOOTH FITNESS' SOLE LIABILITY UNDER THIS  
WARRANTY IS LIMITED TO THE TERMS DESCRIBED IN THIS FORM. THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.  
For assistance with assembly or to order replacement parts, simply call your local Smooth Retailer. To help them assist you,  
please have the following information ready:  
Model name or number from the cover of the manual;  
Serial number located on the frame of the unit; and  
The part description and order number.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
IMPORTANT STEPS  
Warning:  
Before using this product, please consult your personal physician for a complete physical examination. Frequent and  
strenuous exercise should be approved by your doctor first. If any discomfort should result from your use of this product, stop  
exercising and consult your doctor. Proper usage of this product is essential. Please read your manual carefully before  
exercising.  
Please keep all children away from the equipment during use and when equipment is unattended.  
Always wear appropriate clothing, including athletic shoes, when exercising. Do not wear loose clothing that could become  
caught during exercising.  
Make sure that all bolts and nuts are tightened when equipment is in use. Periodic maintenance is required on all exercise  
equipment to keep it in good condition.  
Before beginning:  
How you begin your exercise program depends on your physical condition. If you have been inactive for several years, or  
are severely overweight, you must start slowly and increase your time gradually, a few minutes per week.  
Initially you may be able to exercise only for a few minutes in your target zone. However, your aerobic fitness will improve  
over the next six to eight weeks. Don’t be discouraged if it takes longer. It’s important to work at your own pace. Ultimately,  
you’ll be able to exercise continuously for 30 minutes. And the better your aerobic fitness, the harder you will have to work to  
stay in your target zone. But remember these essentials:  
?? Contact your physician before starting a workout or training program. Have your doctor review your training and diet  
programs to advise you of a workout routine you should adopt.  
?? Begin your training program slowly with realistic goals that have been set by you and your doctor.  
?? Supplement your program with some type of aerobic exercise such as walking, jogging, swimming, dancing and/or  
bicycling. Monitor your pulse frequently. If you do not have an electronic heart rate monitor, have your physician  
show you the proper way to manually check your pulse by using your wrist or neck. Establish your target heart rate  
based on your age and condition.  
?? Drink plenty of fluids during the course of your routine. You must replace the water content lost from excessive  
exercising to avoid dehydration. Avoid drinking large amounts of cold liquids. Fluids should be at room temperature  
when consumed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
TARGET HEART RATE  
Finding your pulse:  
To make sure your heart is beating in its target zone, you’ll need to know how to monitor your heart rate. The easiest way is  
to feel the pulse in the carotid artery on either side of your neck, between the windpipe and the large neck muscles. Count  
the number of beats in ten seconds, and then multiply that number by six. This gives you the number of beats per minute.  
How fast should your heart beat during aerobic exercise? Fast enough to reach and stay in its “target zone,” a range of beats  
per minute that is largely determined by your age and physical condition. To determine your target zone, consult the chart  
we have provided.  
FIND YOUR TARGET HEART RATE  
200  
180  
160  
140  
120  
100  
80  
20  
25  
30  
35  
40  
45  
50  
55  
60  
65  
70  
AGE IN YEARS  
ADVANCED: Sports, athletic conditioning or interval training  
FITNESS: Optimal training, aerobic or cardiovascular  
HEALTH: Beginner, low intensity with long duration produces fat burning  
Aerobic exercise:  
Is any sustained activity that sends oxygen to your muscles via your heart and lungs. It will improve the fitness of your lungs  
and heart: your body’s most important muscle. Aerobic fitness is promoted by any activity that uses your large muscle  
groups - arms, legs or buttocks, for example. Your heart beats quickly and you breathe deeply. An aerobic exercise should  
be part of your entire exercise routine.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
MUSCLE CHART  
Targeted muscle groups:  
The exercise routine that is performed on this product will develop primarily lower body muscle groups. These muscle groups  
are shown in gray color on the chart below.  
Shoulder muscles  
Bicep muscle  
A
C
E
G
I
B
D
F
H
J
Pectoral muscles  
Abdominal muscles  
Quadricep muscles  
Trapezius muscles  
Back muscles  
Forearm muscles  
Calf muscles  
Tricep muscles  
Gluteal muscles  
K
L
Hamstring muscles  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
STRETCHING ROUTINE  
Warm up and cool down:  
A successful exercise program consists of a warm-up, aerobic exercise, and a cool-down. Do the entire program at least two  
and preferably three times a week, resting for a day between workouts. After several months, you can increase your  
workouts to four or five times per week.  
Warming up is an important part of your workout, and should begin every session. It prepares your body for more strenuous  
exercise by heating up and stretching out your muscles, increasing your circulation and pulse rate, and delivering more  
oxygen to your muscles. At the end of your workout, repeat these exercises to reduce sore muscle problems. We suggest  
the warm-up and cool-down exercises on the following pages:  
Toe Touch:  
Slowly bend forward from your waist, letting your back and shoulders relax as you  
stretch toward your toes. Reach down as far as you can and hold for 15 counts.  
Shoulder Lift:  
Lift your right shoulder up toward your ear for one count. Then lift your left  
shoulder up for one count as you lower your right shoulder.  
Head Roll:  
Rotate your head to the right for one count, feeling the stretch up the left side of  
your neck. Next, rotate your head back for one count, stretching your chin to the  
ceiling and letting your mouth open. Rotate your head to the left for one count,  
and finally, drop your head to your chest for one count.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
STRETCHING ROUTINE  
Hamstring Stretch:  
Sit with your right leg extended. Rest the sole of your left foot against your right  
inner thigh. Stretch toward your toe as far as possible. Hold for 15 counts. Relax  
and then repeat with left leg extended.  
Inner Thigh Stretch:  
Sit with the soles of your feet together with your knees pointing outward. Pull your  
feet as close into your groin as possible. Gently push your knees towards the  
floor. Hold for 15 counts.  
Side Stretch:  
Open your arms to the side and continue lifting them until they are over your head.  
Reach your right arm as far upward toward the ceiling as you can for one count.  
Feel the stretch up your right side. Repeat this action with your left arm.  
Calf-Achilles Stretch:  
Lean against a wall with your left leg in front of the right and your arms forward.  
Keep your right leg straight and the left foot on the floor; then bend the left leg and  
lean forward by moving your hips toward the wall. Hold, and then repeat on the  
other side for 15 counts.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
TROUBLESHOOTING  
Troubleshooting  
NOTE: Do not touch any internal electric wires without consulting the manufacturer.  
No display on the Computer LED, after the power is switched on:  
1. Make sure the power cord has been plugged in properly to the power switch on the base frame and mains power socket.  
2. Make sure the safety key is inserted properly into the safety key slot on the console. Try pulling it in and out several times  
until the LED lights up.  
Treadmill will not fold up:  
1. If the incline level is above level 0, press the Reset button on the computer. The treadmill incline level should return to  
level 1 and stop. Then please follow the Power Fold Instructions in this manual to complete the fold up operation.  
2. If the incline has been lowered to level 0, but you cannot lock the spring load knob, please turn the spring load knob  
clockwise. Then lift the treadmill frame from the rear end slightly and check if the spring load knob can be locked in. If you  
can lock in the spring load knob, then your treadmill is not on a level surface. Please check if both rear wheels are sitting on  
the floor evenly, or follow the Level Adjustment Instructions in this manual to adjust the level adjusters underneath the base  
frame until both rear wheels sit evenly on the floor and the spring knob can be locked in.  
Computer LED does not show the pulse:  
1. First, please press the Start button to start the treadmill. Place both hands on the heat rate contact sensors on the  
handlebars. Then check if the LED shows a blinking heart symbol. If the blinking heart symbol is displayed then the  
computer is sensoring your pulse properly. Keep your hands on the sensors until the actual pulse number is displayed on the  
LED.  
2. If when holding the contact sensors on the handlebars the heart symbol is not displayed, please disassemble the  
handlebars and check to make sure both sensor wires are assembled correctly. Disconnect and then reconnect them again.  
Then try the heart rate contacts again.  
Treadmill will not start:  
1. Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a properly grounded outlet  
and the surge protector is turned on (refer to the Power Requirements section in this manual).  
2. Check the circuit breaker reset switch located on the front of the treadmill. Turn the power off, wait 5 minutes then press  
the rest switch.  
3. Check the house electrical breaker box and the circuit breaker for the room the treadmill is located in. If it has tripped,  
reset or have an electrician replace the breaker in home.  
4. Have an electrician check for inadequate voltage at the outlet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
SMOOTH 9.15HR POWER FOLDING TREADMILL  
TROUBLESHOOTING  
Treadmill looses power during use:  
1. Check the circuit breaker reset switch located on the front of the treadmill. Turn the power off, wait 5 minutes then press  
the rest switch.  
If the treadmill still will not operate, please call Technical service at 1.888.800.1167.  
2. Check the house electrical breaker box and the circuit breaker for the room the treadmill is located in. If it has tripped,  
reset or have an electrician replace the breaker in home.  
Treadmill walking belt slows during use:  
1. Check to make sure the treadmill is securely plugged into an UL-listed surge protector, rated at 15 amps, with a 14-guage  
cord of five feet or less and the surge protector is securely plugged into the outlet. If the treadmill still will not operate, please  
call Technical service at 1.888.800.1167.  
Treadmill walking belt slips or is not centered on rear roller:  
Refer to the Belt Adjustment section of this manual. If you require additional assistance please call Technical service at  
1.888.800.1167.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Smooth Fitness  
717 Fellowship Road  
Suite C  
Mt. Laurel, NJ 08054  
Toll Free Customer Service:  
1.888.800.1167  
Website:  
Copyright © 2003  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Projector XR 1X User Manual
Shure DJ Equipment Model FP42 User Manual
Singer Sewing Machine 112W131 User Manual
Sony Automobile Accessories DCC L50 User Manual
Sony Cell Phone 1604 User Manual
Sony Flat Panel Television 4 127 735 121 User Manual
Sony Laptop VPCZ21SHX X User Manual
Sony Portable Stereo System ZS SN10 User Manual
Subaru Robin Power Products Portable Generator P4300ie User Manual
System Sensor Smoke Alarm Smoke Detector Spacing on Level Ceilings with Beams and Joists User Manual