Silvercrest Video Game Controller PS2 WLC User Manual

PS2-WLC Controller  
Playstation®, PS2, PSone and PSX are registered trademarks of Sony Computer  
Entertainment, Inc. This product is not sponsored, endorsed or approved by Sony Features  
and/or specifications subject to change without notice.  
Connection plug  
RX-LED  
User guide  
CONNECT button  
POWER-LED  
We hope you enjoy using our PS2™ 2.4 GHz wireless controller. Please read this guide  
thoroughly before using the unit.  
4-WAY button  
TURBO button  
SELECT button  
PROGRAM button  
START button  
CONNECT button  
button  
1. Product description  
This device is a wireless controller specifically for use with PlayStation2™. It can also be used  
with PSONE™ and PSX™. The controller works at a frequency of 2.4 GHz, has a double  
vibration feature as well as all other functions of the original SONY units. The controller also  
has Turbo and Program functions.  
2. Included  
1 Controller; 1 receiver; 1 user manual  
U button  
{ button  
3. Product features  
X button  
Power Supply:  
Operating time:  
Transmission:  
3 x 1.5 V AAA batteries  
More than 6 hours  
2.4 GHz multi-channel transmission  
10 m  
RIGHT ANALOGUE JOY-  
STICK (when pressed:  
R3)  
Range of action:  
Special functions:  
Turbo function, programmable buttons with memory,  
forced connection  
RX-LED  
ANALOGUE button  
MODE-LED  
4. Connecting the receiver  
LEFT ANALOGUE JOY-  
STICK (when pressed: L3)  
Insert the receiver plug  
into the appropriate slot on the PlayStation™ console and then  
switch on the PlayStation™. The POWER-LED  
on the receiver will come on. The RX-  
X button  
LED will remain on as soon as the receiver is connected to the controller.  
R1 button  
5. Inserting / replacing the batteries  
ON/OFF switch  
Battery compartment  
Before using the controller insert the batteries into the battery compartment on the back of the  
unit. To do this, open the battery compartment , insert the new batteries according to the  
polarity and close the compartment. Please ensure the controller has been switched off before  
you replace the batteries. Please also read the information on safe disposal of batteries.  
L1button  
L2button  
- 1 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PS2-WLC Controller  
ƒ Never mix battery types and never mix old and new batteries. Replace the batteries as  
soon as they become too weak or where the unit has not been used for some time.  
ƒ There is a risk of explosion if the batteries are not replaced in the proper manner. Please  
ensure the batteries are always inserted according to the correct polarity. Replace the  
batteries with the same brand or similar batteries. Risk of explosion when batteries are  
replaced incorrectly.  
ƒ Do not attempt to recharge a non-rechargeable battery. There is a risk of explosion.  
ƒ Batteries / rechargeable batteries can be fatal if swallowed. Please store batteries out of  
reach of small children. Seek medical help immediately if a battery has been swallowed.  
ƒ Do not expose the batteries to heat or flames. Never short-circuit batteries; never try to  
force open batteries; never attempt to recharge non-rechargeable batteries. Batteries may  
otherwise explode and cause serious injury.  
The RX-LED  
flashes when performing the TURBO function.  
comes when on you are setting the TURBO function; the RX-LED  
12. Button programming function:  
You can program and save the button sequence using the PROGRAM function.  
Setting the PROGRAM functions: Press the PROGRAM button . The RX-LED  
light will come on. Now press the button which you want to programme with a combined  
function. Then press the desired button sequence (a maximum of 15 buttons) finish by  
pressing the PROGRAM button.  
The RX-LED light will go out.  
15. Disposing of batteries  
Clearing the PROGRAM functions: Press the PROGRAM button  
once. The  
Please note that you, as the end user, are required to return used batteries to a public  
or privately run battery disposal unit.  
RX-LED light will come on. Press the button which you previously programmed and want  
to clear. Press the PROGRAM button once again. The RX-LED goes out, i.e. the  
PROGRAM function has been cleared.  
The following buttons can be programmed with combined functions: L2, L3, R2, R3. The  
following buttons can be used for programming: U, {, X, , all 4 directional buttons, L1,  
L2, L3, R1, R2 and R3. When you switch off the unit the controller retains the last  
16. Disposing of the unit  
Please note that this device is subject to European Directive 2002/96/EC on the  
reduction of electronic waste.  
ƒ You are not permitted to dispose of this unit together with household  
PROGRAM function setting. The RX-LED  
PROGRAM function; the RX-LED flashes when you are using the PROGRAM function.  
remains on when you are setting the  
waste.  
ƒ Information on safe disposal of all devices is available from your local  
council, waste disposal unit and the shop in which you purchased this  
product.  
ƒ You may deposit this product free of charge in your community collection  
Note:  
Not every game supports button sequence programming.  
facility.  
ƒ Correct disposal of used goods protects the environment as well as your  
13. Vibration mode  
The unit vibrates once briefly to confirm when you press the R3 and SELECT buttons. This  
is to indicate that all vibrations (strong and weak) have been deactivated. Press the same  
button again to reactivate the vibration mode. This is confirmed by two short vibrations.  
health.  
17. Guarantee  
This product comes with a three-year guarantee starting on the day of purchase. If this product  
is faulty send it, together with the receipt and a stamped-addressed envelope, to:  
14. Safety advice  
ƒ Do not attempt to dismantle, modify or repair the unit yourself.  
JNC Datum Tech GmbH, Support Center,  
Maltschachstrasse 32, D - 72144 Dusslingen, Germany.  
ƒ Do not use this unit together with other electronic equipment of the same operating  
frequency to avoid damaging both units.  
ƒ Please ensure no fluids or small pieces of metal can get inside the unit. Avoid knocks to  
the unit and do not place heavy objects on the device. Do not place containers of liquid like  
vases or drinking glasses on or near the unit and never immerse the unit in fluid.  
ƒ Do not use or store the unit in high-temperature areas, or in steamy, smoky or dusty areas.  
Manufacturer:  
JNC Datum Tech GmbH  
Benzstraße 33  
More information can also be found at:  
D - 71083 Herrenberg  
Germany  
- 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp MP3 Docking Station XL HF200PHBK User Manual
Snapper Cultivator 1690715 User Manual
Soleus Air Fan FC3 35R 12 User Manual
Sonance Speaker ST2432D Series User Manual
Sony Car Stereo System CDX M3DI User Manual
Sony Home Theater System 3 285 995 111 User Manual
Sony Satellite TV System DST HD500 User Manual
Sony Stereo System STR DE845 User Manual
Stiga Lawn Mower COMFORT User Manual
Sunbeam Gas Grill WG4610HP User Manual