6
Under-Cabinet Radio
KH 2398
Under-Cabinet Radio
Operating manual
KOMPERNASS GMBH
BURGSTRASSE 21 ⋅ D-44867 BOCHUM
ID-Nr.: KH 2398-4/10-V4
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
PAGE
Intended Use
2
2
Items supplied
Technical data
2
Safety instructions
The appliance components
Setting up the appliance
Fixing the kitchen radio beneath a wall cabinet
Setting up the kitchen radio
The Settings menu
Further setting possibilities
Radio operation
2
4
4
5
5
5
7
8
Non-functionality
10
10
11
11
11
11
Cleaning
Disposal
CE Conformity
Importer
Warranty and Service
Read the operating instructions carefully before using the appliance for the first time and pre-
serve this booklet for later reference. Pass this booklet on to whoever might acquire the appli-
ance at a future date.
- 1 -
Download from Www.Somanuals.com. All Manuals Search And Download.
assigned radio frequency ranges may not be
utilised, passed on to third parties or other-
wise misused.
Intended Use
This Kitchen Radio is intended for use either
free-standing or for assembly beneath a wall
cabinet. The intended uses for this Kitchen Ra-
dio are the reception of FM radio transmissions
and as an alarm/timer, using either signal
tones or the radio itself.
Safety instructions
• This appliance is not intended for use
by individuals (including children) with
restricted physical, physiological or intel-
lectual abilities or deficiencies in experi-
ence and/or knowledge unless they are
supervised by a person responsible for
their safety or receive from this person
instruction in how the appliance is to be
used. Children should be supervised to
ensure that they do not play with the ap-
pliance.
This Kitchen Radio is not intended for utilisa-
tion in commercial or industrial applications.
The warranty does not provide compensa-
tion for damage caused by improper use of
the appliance!
Items supplied
1 Kitchen radio KH 2398
1 Mounting plate
• Always remove the power plug before
cleaning the appliance.
4 Screws
• Check the appliance and all parts for
visible damages. The safety concept can
work only if the appliance is in a fault-
less condition.
• The power plug must always be easily
accessible, so that in the event of an
emergency the appliance can
2 Batteries type AAA/Micro
1 Operating manual
Technical data
Power supply:
Power consumption:
Operation:
Standby:
Output level:
Frequency range
220-240V , 50 Hz
~
5 W
be quickly disconnected from the mains
power supply.
approx. 1.8 W
1 W at 10% THD
FM 87.5–108 MHz
Risk of electrical shocks.
• Connect the appliance only to correctly
installed and earthed mains power sock-
ets. Ensure that the rating of the local
power supply tallies completely with the
details given on the rating plate of the
appliance.
• Arrange for Customer Services to repair
or replace connecting cables and/or ap-
pliances that are not functioning properly
or have been damaged.
Operating temperature: +5 +35°C
~
Humidity:
5
90 %
~
(No condensation)
Dimensions
(W x H x D):
Weight:
27,5 x 16 x 6,3 cm
1.045 g
Protection class:
Backup batteries
AAA/Micro
II /
2 x 1.5 V Type
The technical features of this appliance en-
able an adjustable reception capability that
exceeds the permitted frequency range of
87,5–108 MHz. In some countries, differ-
ent national regulations may apply to the
assigned radio frequency ranges. Please
note that information received outside of the
• NEVER submerse the appliance in water.
Wipe it only with a slightly damp cloth.
• Do not expose the appliance to rain and
never use it in a humid or wet environ-
ment.
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
• Always take hold of the power cable by
the plug. Do not pull on the cable itself
and never touch the power cable with wet
hands, this could result in either a short cir-
cuit or you receiving an electric shock.
• Do not place the appliance, furniture or
anything else on the power cable and en-
sure that it does not become clamped.
• NEVER make a knot in the power cable
and do NOT bind it together with other
cables. The power cable should be
positioned so that no one can step on or
trip over it.
• Ensure that the power cable does not
become wet during operation.
• You are not permitted to open the appli-
ance housing or repair the appliance. If
the housing is opened, you run the risk
of receiving a potentially fatal electric
shock and the warranty lapses.
• Provide a stable location for the appli-
ance.
• Do not operate the appliance if it has
sustained a fall or is damaged.
• Arrange for the appliance to be checked
and/or repaired by qualified technicians.
• Keep batteries well away from children.
Children can put batteries into their
mouths and swallow them.
• If a battery is swallowed medical assist-
ance must be sought immediately.
Note:
• Some aggressive furniture finishes can
have a destructive influence on the appli-
ance's rubber pads. If necessary, place
the appliance on a nonslip pad.
Thunderstorms!
• Equipment connected to a power supply
can be damaged during a thunder-
storm. You should therefore always
remove the plug from the power socket
when there is a storm.
• Protect the appliance against drip and
spray water. Do not place any water-
filled vessels (e.g. flower vases) on or
near the appliance.
Notice regarding separation from
mains-power
Risk of fire!
• Do not use the appliance near hot sur-
faces.
• Do not install the kitchen radio close
to sources of heat such as radiators or
stoves. Otherwise, it may overheat and
become irreparably damaged.
• Do not locate the kitchen radio directly
above hotplates. The kitchen radio may
be damaged. There is a danger of fire!
• Never leave the appliance unattended
while it is being used.
• Never cover the ventilation slots of the
appliance while it is on.
The ON/OFF switch does not com-
pletely disconnect the appliance from
the power network. Additionally, the
appliance consumes power when in
standby-mode.
To completely separate the appliance
from mains power, the power plug MUST
be removed from the mains power socket.
Notice regarding electrical power
surges(EFT /electrical fast
transient) and electrostatic
discharges:
• Do not place open fire sources, such as
candles, on or near the appliance.
In a case of malfunction due to an electri-
cal fast transient (power surge) and/or
electrostatic discharge, the appliance must
be returned to default settings in order to
re-establish normal operation. Possibly
the power supply must be separated
and then reconnected. The batteries (if
Risk of personal injury!
• Keep the power cable and appliance
away from children. Children frequently
underestimate the dangers of electrical
appliances.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
present) must be removed and then re-
inserted.
d USER/BASS - User switching,
Bass boost
f MEM SCAN - for the automatic recall of
saved radio stations
Information regarding the
handling of batteries
The appliance uses batteries for memo-
ry conservation. For the handling of bat-
teries please observe the following:
g TIMER
- control for the timer pro-
gramming
h MEM SET - to save and automatically
/AMS
search and save radio
stations
Risk of explosion!
j MODE/
- Calls up the settings, Key
lock
• Do not subject the batteries to excessive
heat such as fire, sunlight or similar. Do
not recharge the batteries.
• Never open batteries, never solder or
weld batteries. The risk of explosions
and injuries exists!
k Battery compartment
l DOWN - Selection button down
1( UP
2) ON/OFF
- Selection button up
- Radio on/off
• Regularly check the condition of the bat-
teries. Leaking batteries can cause dam-
age to the appliance.
• If you do not intend to use the appliance
for an extended period, remove the bat-
teries.
• Should the batteries leak, put on a pair
of protective gloves and clean the battery
compartment and terminals with a dry
cloth.
Setting up the appliance
First take all appliance components from the
packaging and remove all packing foil and
tape.
Inserting the back-up batteries
The back-up batteries ensure that the time,
date and alarm time setting are not lost in the
event of a power cut. For this you require two
1.5 V batteries of the type AAA/Micro.
Important!
1. Open the lid of the battery compartment
1& on the underside of the kitchen radio.
2. Insert the batteries. Make sure the polari-
ties are correct. Otherwise, the memory
receipt will not function and damage may
be caused to the appliance.
No liability/warranty will be consid-
ered for damage to the Kitchen Radio
caused by the effects of moisture, water
penetration or overheating!
The appliance components
(See fold-out illustration "A")
3. Close the lid of the battery compartment
1&. The lid must audibly engage.
q Mounting plate/Baseplate
w Power cable
e Wire aerial
Note:
The back-up batteries must be checked
at least once per year and, if necessary,
exchanged for new ones.
r–u M1–M4 - Memory buttons M1–M4
Alarm1-4
i DIMMER
/AOT
- Alarm buttons 1-4
- controls the display
lighting, controls the
switch-off timer
o Display
a VOL —
s VOL +
- Volume down
- Volume up
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Push the two rear retainer lugs on the
mounting plate qinto the recesses on the
lower side of the kitchen radio.
3. Press the mounting plate qfirmly into the
appliance underside until it perceptibly
engages.
Fixing the kitchen radio beneath a
wall cabinet
With the supplied mounting plate q you can
fix the kitchen radio below, for example, a
kitchen wall cabinet:
1. Determine a suitable location for the
kitchen radio.
2. Press the two retaining levers on the back
of the appliance down. Push the mounting
plate q back and remove it.
3. Hold the mounting plate q under the in-
stallation location. Thereby, the front edge
of the mounting plate q should be ap-
prox. 4 cm behind the front of the kitchen
cabinet (See fold-out illustration "B").
4. Mark the four points for the drillholes with
a pencil.
Providing mains power
• When you have completed installation of
the appliance, insert the plug into a mains
power socket. The display ois illumi-
nated and the appliance tries to receive
an RDS signal to automatically adjust
the time and date.
• For as long as the appliance waits for
the RDS signal, the display o shows
"Please wait for setting thanks". This
can take several minutes. To hide this no-
tice, press the button MODE/
j.
5. Using a spike, make a small depres-
sion at the marking points. Firmly secure
the mounting plate q with the supplied
screws.
6. Hold the kitchen radio slanted, with the
two recesses in the retaining lugs on the
mounting plate q. Press the kitchen radio
upwards until it perceptibly engages.
The Settings menu
Setting the time
Should this not succeed, you must set the
clock manually. For this, the radio cannot be
switched on (= automatic mode).
1. In automatic mode press the button
MODE/
blinks.
j once. The time display
Disassembly
• To disassemble the kitchen radio, press
the two retaining levers at the rear of the
appliance downwards. Then pull the ra-
dio out to the front and remove it.
• Unscrew the screws and remove the as-
sembly plate q.
2. Press the buttons UP/DOWN 1(/l
to set the time in minute intervals. Pressing
and holding the button changes the time
at ten-minute intervals.
3. Press the button MODE/
j once
again to save the time and switch to the
date setting.
If you do not press a button for 15 seconds
when making the settings, the appliance saves
the current setting and returns to automatic
mode.
Setting up the kitchen radio
Do not set the kitchen radio up without the
mounting plate q. Otherwise the speakers are
covered and the sound is scarcely audible.
To fit the kitchen radio with the supplied
mounting plate q:
Setting the date
1. In automatic mode press the button
1. Simultaneously press the two retaining
levers on the back of the appliance down.
Push the mounting plate q back and re-
move it.
MODE/
j twice. In the display o
appears "01.01.2010", the date display
flashes.
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
The appliance will remind you of a date
that you have set with the reminder function.
Then, on this given day from 08:00 – to
23:00, and on every full hour, the acoustic
reminder alarm sounds for 10 minutes if you
do not stop the alarm. In addition, the SDA-
panel in the display o blinks. To stop the
reminder alarm, press any button.
2. Press the buttons UP/DOWN 1(/l
to set the date at day intervals. Pressing
and holding the buttons changes the date
at intervals of 10 days.
3. Press the button MODE/
j once
again to save the date and to switch to
setting the memory function.
If you later press the DOWN button lin
automatic mode, the display o briefly shows
"DAY". Subsequently, the time and date dis-
play alternate themselves. To switch back to
an exclusive time display, press the button
DOWN l once again.
Setting the update function
Using this function, the appliance can auto-
matically update the settings for the clock
based on the RDS data.
1. In automatic mode press the button
Setting the memory functions
You can programme in up to 6 dates, which
the appliance will remind you of when they
are reached.
MODE/
j four times. The display o
shows "UP DATE".
2. Press the button DOWN l, to deacti-
vate the actualisation function. The blink-
ing clock symbol in the display o then
disappears.
1. In automatic mode press the button
MODE/
j three times. The display
3. Press the button UP 1(to reactivate the
update function. The hour symbol ap-
pears.
o shows alternatively a date and the
SDA 1 indicator for reminder date 1.
2. Press the buttons UP/DOWN 1(/l
to set the first desired reminder date. As
the earliest possible date you can set the
following day. Pressing and holding one
of the buttons changes the display in ten-
minute intervals.
3. When you press the button TIMER g, the
year number is deactivated and thus you
are reminded on this date every year.
4. Should you wish to programme in further
SDA's, press the button MEM SCAN f to
select the desired memory positions 2-6.
The selected memory location (SDA 2-6)
will be indicated in the display o.
4. Press the button MODE/
jonce
again to save the settings of the update
function (the display flashes for 15 sec-
onds, after that the saving is finalised)
and to switch to setting the 12 or 24 hour
mode.
Setting the dimmer function
In automatic mode press the button MODE
/
j five times. Or press and hold the
button DIMMER/AOT i to set the dimmer
function outside of the Settings menu. In the
display o appears either DIM ON (delivery
state) or DIM OFF. Press and hold the button
DIMMER/AOT i once again to change the
dimmer setting.
DIM ON: The display o lights up for 15 sec-
onds when a button is pressed.
DIM OFF: The display o is permanently lit.
5. Follow the same steps with the other
dates.
6. To deactivate the memory function, pro-
gramme in a date that lies in the past.
7. Press the button MODE/
jonce
again to save the settings of the memory
function and to switch to setting the up-
date function.
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting 12 or 24 hour time display
Interrupting the kitchen timer.
• To interrupt the kitchen timer, switch to the
kitchen timer mode by pressing the button
TIMER g.
• Then briefly press the button TIMER g to
interrupt the kitchen timer.
1. In automatic mode press the button
MODE/
j six times. In the display
o appears "24 HOUR" for the 24 hour
modus.
2. Press the button DOWN l to select the
12 hour modus. In the display o appears The time is halted, the indicator blinks for 15
"12 HOUR". Press the button UP 1( to re-
turn to the 24 hour modus.
seconds. After this period the appliance re-
turns to automatic modus. To restart the kitchen
In the 12 hour mode, „PM” (post meridiem = timer, briefly press the button TIMER gagain
afternoon) appears before the time indcator
to switch back into the kitchen timer mode.
in the display o from 12:00 to 23:59.
• Press the button TIMER g once again. The
time then continues to run.
Press the button MODE/
j to save the
menu settings and to close it down.
• To completely switch the kitchen timer off,
press and hold the button TIMER g for 3
seconds The clock and cooking pot sym-
bol disappear.
Further setting possibilities
Kitchen timer
1. Press the button TIMER g.
Programming the kitchen timer
You can programme frequently used times for
the kitchen timer into the appliance, so that
you do not need to enter them in repeatedly.
As the appliance can be used by several
people, it has user switching, A/B. Both users
can save 8 different timer periods each.
2. Using the buttons UP/DOWN 1(/l,
set the desired time interval (a time span
between 1 minute and 23:59 h is pos-
sible). Pressing and holding one of the
buttons changes the display in ten-minute
intervals. Or press one of the buttons
M1–M4 r–u to recall a saved preset
time for the kitchen timer. The following
times are factory pre-programmed:
M1 r = 5/25 min. (Indicator = T1/5)
M2 t = 10/30 min. (Indicator = T2/6)
M3 y = 15/35 min. (Indicator = T3/7)
M4 u = 20/40 min. (Indicator = T4/8)
3. Press the button TIMER g once again to
start the kitchen timer. In the display o a
clock icon running in reverse and a cook-
ing pot symbol appears.
1. First, select the desired user. To switch
between users, press and hold the button
USER/BASS dfor two seconds. Depend-
ing on the selected user, the display o
indicates either "A" or "B".
2. Then press the button TIMER g.
3. Using the buttons UP/DOWN 1(/l
enter in the desired time.
4. Press the button MEM SET/AMS h. On
the right and next to the time indicator, "T"
lights up.
4. From 30 seconds before expiry of the time
span an acoustic signal sounds, repeating
at shorter intervals the closer the set time
approaches. When the time has expired,
the alarm sounds continuously and with
increasing volume.
5. In order to occupy one of the memory
locations 1–4, press the desired memory
location button M1–M4 r–u under
which the time for the kitchen timer should
be saved once. Its number is now shown
to the right of the "T". To occupy one of the
memory locations 5–8, press the desired
memory location button M1–M4 r–u
twice.
5. Press the button TIMER gto terminate the
acoustic signal.
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
through repeated brief pressing of the
TIMER g button, select a specific week-
day (e.g. only "We"). The selected setting
is indicated in the display o.
6. Press the button MEM SET/AMS h once
again to conclude the saving. The display
flashes for 15 seconds, after that the sav-
ing is finalised.
6. To return to the selection of workdays,
weekends or whole weeks, once again
hold the button TIMER g pressed down
for 2 seconds.
Setting alarm times (Alarm 1–4)
You can programme four alarm times with
your kitchen radio.
7. After 15 seconds the blinking in the dis-
play stops and your input is saved. The ap-
pliance then returns to automatic modus.
Alarm function
Symbol in the display o
Acoustic signal
When the alarm signal sounds...
• and the alarm function "Radio" has been
selected, the radio plays for one hour at
a pre-defined alarm volume. To exit, press
one of the ALARM buttons 1–4 r–u.
• and the alarm function "Signaltones" has
been selected, the signal tone sounds for
10 minutes, with an increasing volume. To
exit, press one of the ALARM buttons 1–4
r–u.
Radio
Switched off
no symbol
1. In automatic mode, press one of the
ALARM buttons 1–4 r–u to select the
location for the to be programmed alarm
memory. In the display o the last set
alarm time and the symbol for the type of
alarm blink for 15 seconds.
2. Press the buttons UP/DOWN 1(/l
to set the desired alarm time.
3. Repeatedly press the ALARM button pre-
viously pressed until the desired alarm
function (see table above) is indicated in
the display o.
4. Repeatedly press the button TIMER gto
set the weekdays on which you require the
alarm function: You can select between
"workdays" (Mo, Tu, We, Th, Fr), "week-
ends" (Su, Sa) and "every day" (Su, Mo,
Tu, We, Th, Fr, Sa). Thereby, orientate
yourself on the weekday indicator in the
display o:
Radio operation
For radio reception, completely unwind the
wire aerial e and, with the radio switched
on, determine the most favourable position-
ing for it.
Switching the radio on and off
1. To switch the radio function on, press the
button ON/OFF 2). In the display o the
currently selected frequency is shown.
2. Press the button ON/OFF 2) once again
to switch the radio off and return the ap-
pliance to the automatic modus.
Manual station selection
Mo
Tu
We
Th
Fr
Sa
Su
= Monday
= Tuesday
= Wednesday
= Thursday
= Friday
= Saturday
= Sunday.
1. Briefly press the button UP 1( repeat-
edly to search for stations with a higher
frequency than the one shown in the dis-
play o.
2. Briefly press the button DOWN l
repeatedly to search for stations with a
lower frequency than the one shown in
the display o.
5. If you hold the button TIMER g pressed
down for 2 seconds, you can also,
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Should the currently adjusted station trans-
mit RDS data, the indicator in
If the memory location button r– uhas
been pressed previously, the memory loca-
tion indicator and the MEM" indicator blink.
3. Press one of preset buttons M1–M4
r–u, if necessary repeatedly, to save
the radio station to the desired save posi-
tion. In the display o, the indicator for the
save position selected by you and "MEM"
blink.
the display o blinks. Then the display
o shows the name of the radio station,
and the time is updated (if activated in
the settings, see section "Setting Update
function"). During a running time update
via RDS the clock icon in the display o
flashes.
4. Press the button MEM SET/AMS h once
again. "MEM" and the save position are
constantly indicated, the radio station is
saved.
5. Repeat the steps 1 to 4 (for both users)
until all of the desired radio stations are
saved.
6. To recall the saved radio stations, press
the corresponding preset buttons (M1–
M4 r–u) in radio mode, several times
if need be, until the number of the saved
position appears in the display o.
Automatic station search
You can have the kitchen radio search for
stations. The kitchen radio searches the fre-
quency range until it finds a station.
1. Press and hold the button UP 1( for two
seconds: the kitchen radio searches for
the station with the next highest frequency.
2. Press and hold the button DOWN
l for two seconds: the kitchen radio
searches for the station with the next low-
est frequency.
Repeat these steps until you have found a
radio station to your liking.
Automatically save and recall a radio
station
With the AMS function (Automatic Memory
System), the radio automatically searches
for stations and stores them at the memory
locations. Previously saved radio stations are
thereby erased.
Save and recall a radio station manually
As the appliance can be used by numerous
people, it is fitted with user switching, A/B.
Both users can save different radio stations.
To switch between users, press and hold the
button USER/BASS d for two seconds.
1. Press and hold the button MEM SET/
AMS h for two seconds. The kitchen ra-
dio automatically searches for sufficiently
powerful radio stations and saves them in
the memory.
2. The station search can be stopped by press-
ing on the button MEM SET/AMS h. The
most recently found radio station plays.
3. When you press the button MEM SCAN
f, the saved radio stations are recalled
in their sequence and each is played for
15 seconds.
Each user can save 32 radio stations in the
appliance. Available for this are:
Preset button M1 r for the save positions
A0 – A7,
Preset button M2 t for the save positions
B0 – B7,
Preset button M3 y for the save positions
C0 – C7, and
Preset button M4 u for the save positions
D0 – D7.
Press the corresponding preset button once
to address the save position "0", press twice
for "1", etc.
4. To quickly move on to another radio sta-
tion, press the button MEM SCAN f.
5. To quit the automatic recall, press the but-
1. Set the user and the desired radio station.
2. Press the button MEM SET/AMS h.In
the display o the "MEM" indicator blinks.
ton MODE/
j. The display o will
then show the time for 15 seconds.
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the volume.
the display o the AOT indicator and a
clock symbol appear when the switch-off
timer function is activated. After a few
seconds, the frequency is indicated once
again.
• To reduce the sound volume, in radio op-
eration repeatedly press the button VOL
— a, or hold the button down.
• To increase the sound volume, in radio op-
eration repeatedly press the button VOL. +
s, or hold the button down.
3. At any time you can press the DIMMER/
A.O.T. i button to blend in the remaining
countdown time for a few seconds.
4. On expiry of the time period the appli-
ance switches itself off.
5. To simply switch the unit off, press the but-
ton ON/OFF 2).
Lock function
You can lock the kitchen radio so that settings
cannot be altered by unauthorised people or
children.
• Press and hold the button MODE/
j
for 3 seconds. A key symbol appears in
the display o.
• When a key is pressed and the lock is ac-
tivated, the key symbol blinks but no other
functions are carried out.
Non-functionality
• Do not attempt to take the device apart
and/or, in the event of possible defects, to
repair yourself. You could potentially dam-
age the sensitive electronic components.
• Repairs to your device must be carried out
exclusively by qualified service personnel!
• No warranty/liability will be assumed for
damage resulting from improper use and/
or opening of the device!
• To disable the lock function, press and
hold the button MODE/
key symbol extinguishes.
j until the
Bass
Should you wish to have an amplified repro-
duction of the lower frequencies, press the
button USER/BASS d when in radio modus.
In the display o the indicator "BASS" then
appears. Press this button once again to de-
activate the function.
• In the event of malfunction please get in
touch with the corresponding service affili-
ate in your country.
Cleaning
Displaying the time
Warning!
Always remove the plug before clean-
ing the appliance!
To display the time for 15 seconds during
radio operation, press the button MODE/
j.
Moisture penetrating into the appliance
creates the risk of electric shock! Addi-
tionally, the kitchen radio could become
irreparably damaged!
A.O.T. - Switch-off timer
This appliance is fitted with a switch-off
timer for up to 90 minutes.
1. Press the button DIMMER/A.O.T. i to
call the function up and, if need be, to
switch the radio on.
2. Repeatedly press the button DIMMER/
A.O.T. i to programme in the number of
minutes, in increments of 5 minutes, for
which the appliance is to remain switched
on. The default setting is 90 minutes. In
Clean the housing of the kitchen radio with
a slightly moist cloth and a mild detergent
only. Ensure that moisture cannot permeate
into the appliance during cleaning!
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal
CE Conformity
Do not dispose of the appliance
in your normal domestic waste.
This product is subject to the
provisions of European Directive
2002/96/EC.
This device complies, regarding conformity,
to the basic requirements and other relevant
provisions of the Low Voltage Directive
2004/108/EC, the Directive for Low Volt-
age Appliances 2006/95/EC and the Eco
Design Directive 2009/125/EC (Ordinance
1275/2008 Appendix II, Number 1).
Disposing of the appliance
• Arrange for the product, or parts of it, to be
disposed of by a professional disposal com-
pany or by your communal waste facility.
• Observe the currently applicable regula-
tions. In case of doubt, please contact
your waste disposal centre.
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
Disposal of batteries/accumulators
• Used batteries/rechargeable batteries
may not be disposed of in household
waste.
• Batteries/rechargeable batteries can
contain toxic substances which may
damage the environment. Therefore,
dispose of the batteries/rechargeable
batteries in accordance with statutory
regulations.
• Every consumer is statutorily obliged to
dispose of batteries/rechargeable bat-
teries to a community collection centre in
their district or to a dealer. The purpose
of this obligation is to ensure that bat-
teries are disposed of in a non-polluting
manner.
Warranty and Service
The warranty for this appliance is for 3 years
from the date of purchase. The appliance
has been manufactured with care and me-
ticulously examined before delivery. Please
retain your receipt as proof of purchase. In
the event of a warranty claim, please make
contact by telephone with our Service De-
partment. Only in this way can a post-free
despatch for your goods be assured.
The warranty covers only claims for material
and maufacturing defects, but not for trans-
port damage, for wearing parts or for dam-
age to fragile components, e.g. buttons or
batteries. This product is for private use only
and is not intended for commercial use.
• Only dispose of batteries when they are
fully discharged.
The warranty is void in the case of abusive
and improper handling, use of force and
internal tampering not carried out by our
authorized service branch. Your statutory
rights are not restricted in any way by this
warranty.
Disposal of packaging
Dispose of all packaging materials in
an environmentally friendly manner.
The warranty period will not be extended by
repairs made unter warranty. This applies al-
soto replaced and repaired parts. Any dam-
age and defects extant on purchase must be
reported immediately after unpacking the
appliance, at the latest, two days after the
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
purchase date. Repairs made after the expi-
ration of the warranty period are subject to
payment.
DES Ltd
Tel.: 0871 5000 700 (£ 0.10 / minute)
e-mail: [email protected]
Kompernass Service Ireland
Tel: 1850 930 412 (0,082 EUR/Min.)
Standard call rates apply. Mobile operators may
vary.
e-mail: [email protected]
Kompernass Service Cyprus
Tel.: 800 94401
e-mail: [email protected]
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|