Shure Microphone 596LB User Manual

Model 596LB User Guide  
DYNAMIC HAND-HELD COMMUNICATIONS MICROPHONE  
MOUNTING  
The 596LB is provided with a rear-case hang-up button for  
use with a mounting bracket on or near associated equip-  
ment. The bracket has mounting holes with clearance for  
No. 6 or No. 8 screws (not supplied).  
CONNECTIONS  
The internal switch connections of the 596LB are shown in  
Figure 1. The 596LB has a four-conductor, coiled-cord cable  
(two conductors shielded) and a double-pole, double-throw,  
push-button switch to control the microphone circuit and an  
external relay or switching circuit. The RED and BLACK un-  
shielded leads control the relay or switching circuit.  
Refer to the following tables and to the wiring diagram below.  
INPUT TYPE  
WIRE  
COLOR  
FUNCTION  
XLR  
CONNECTOR  
1/4 IN.  
PHONE  
PLUG  
WHITE  
GREEN  
SHIELD  
AUDIO  
PIN 2  
PIN 3  
PIN 1  
TIP  
UNBALANCED  
BALANCED  
AUDIO GROUND  
CHASSIS GROUND  
SLEEVE  
SLEEVE  
WHITE  
GREEN  
SHIELD  
AUDIO +  
AUDIO –  
PIN 2  
PIN 3  
PIN 1  
TIP  
GENERAL  
RING  
The Shure Model 596LB is a compact, hand-held dynam-  
ic, low-impedance communications microphone with a 200  
to 5,000 Hz frequency response. Designed especially for  
voice communications use, it is an economical unit for ap-  
plications in budget-restricted paging and other installa-  
tions. The microphone is compatible with many popular pag-  
ing amplifier inputs. Its tailored frequency response provides  
CHASSIS GROUND  
SLEEVE  
BLACK  
W6  
W1  
SWITCH  
CLOSURE  
RED  
SWITCH  
CLOSURE  
clear, intelligible operation. The ARMO-DUR case is small,  
light and sturdy, and fits comfortably in the palm of the hand.  
It has a long-life push-to-talk switch, and a durable coiled  
cable for years of reliable performance. The 596LB has a  
low-impedance output.  
The 596LB is furnished with a sturdy mounting bracket for  
permanent installation.  
N.C.  
S1  
WHITE  
W2  
W3  
AUDIO +  
AUDIO –  
C4  
.001  
GREEN  
MK1  
Features  
SHIELD  
Omnidirectional pickup pattern for optimum off-axis op-  
eration  
Frequency response from 200 to 5,000 Hz, tailored for  
WIRING DIAGRAM  
FIGURE 1  
voice communications  
Economical—the perfect choice for modest paging instal-  
The 596LB can be wired for balanced-line operation and is  
recommended for use where long cable lengths are re-  
quired, or conditions where severe hum pickup may exist.  
The 596LB can be fed directly into a standard low-imped-  
ance amplifier input, or a Shure A95 Series Line Matching  
Transformer (at the equipment end of the cable) can be used  
for coupling the 596LB to the input of a high-impedance am-  
plifier. A two-conductor shielded cable can be used for ex-  
tending only the microphone circuit. If both the microphone  
and the remote circuit are to be extended, a four-conductor  
with two shielded conductors should be used.  
lations  
Rugged and dependable under most operating conditions  
Silver-plated switch contacts for long-term low contact re-  
sistance and reliable performance  
Long-life vinyl-jacketed coil-cord for years of trouble-free  
operation  
Output impedance matches most paging amplifier inputs  
Virtually indestructible ARMO-DUR case  
Sturdy, convenient mounting button for attaching to equip-  
The microphone circuit of the 596LB is normally open  
when the microphone switch button is not depressed.  
ment or nearby surface using supplied mounting bracket  
2002, Shure Incorporated  
27B2756 (BK)  
Printed in U.S.A.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Microphone SDC 8000 D User Manual
Servis Rhino Lawn Mower FR162 User Manual
Sharp Car Stereo System DV SL1200W User Manual
Shure Headphones SE530 User Manual
Sony Digital Camera SNC Z20P User Manual
Sony Ericsson Headphones HBH PV715 User Manual
Sony Personal Computer PCG R505TEK User Manual
Sunbeam Toaster 6222 User Manual
Swann Security Camera Maxi Brite Cam User Manual
Symphonic TV VCR Combo SC1304 User Manual