GLX-D® Wireless System GLXD4 Receiver
User Guide
Le Guide de l’Utilisateur
Bedienungsanleitung
Manuale d’uso
Guia del Usuario
Guida dell’Utente
Gebruikershandleiding
Руководство пользователя
© 2016 Shure Incorporated
27A32537 (Rev. 1)
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
System Overview
The new groundbreaking GLX-D Wireless Systems from Shure combine the leading edge of Automatic Frequency Management technology with best-in-class intelligent lithi-
um-ion battery rechargeability, world-renowned microphones and unparalleled design and construction. Available in a wide offering of bodypack and handheld configurations -
including vocal, headset and presenter systems as well as traditional guitar options. The revolutionary GLX-D Wireless Systems define the newest standard for seamless ease
of operation and exceptional digital audio clarity.
• Exceptional digital audio clarity
• RF back-channel for remote control of transmitter functions
• Operates in 2.4 GHz spectrum, available worldwide
• Rechargeable batteries deliver cost-efficiency and up to 16 hours of runtime
• Adjustable transmitter gain to optimize audio signal
• Automatically moves away from interference without audio interruption
• Globally-unlicensed 2.4 GHz frequency band allows operation of up to 4 com-
patible systems in a typical setting and up to 8 compatible systems under ideal
conditions
• Automatic transmitter power-off to conserve battery life when transmitter is not in
use
Included Components
Optional Accessories
Shure Rechargeable Battery
Micro USB Battery Charger
Power Supply
SB902
Car Battery Charger
SBC-CAR
SBC10-USB
PS43
Stand Alone Single Battery
Charger
SBC10-902
Carrying Case
95E16526
Quick Start
To reduce set up time, the transmitter and receiver automatically link to form an audio channel the first time they are powered on and never have to be linked again.
Note: When setting up multiple receiver systems, turn on and link each transmitter/receiver pair one at a time to prevent cross-linking.
Step ②
Install charged transmitter
batteries.
Step ①
Connect power supply to the receiver and plug cord into an AC power source.
Connect the audio output to an amplifier or mixer.
Step ③
Step ④
Check the audio and adjust the gain if necessary.
Turn on the transmitter and receiver. The blue RF LED will flash while the
transmitter and receiver form a link. When the link has successfully formed, the
RF LED will remain illuminated.
rf grou
p
+
gain
-
on
GLXD2
on
on
on
link
channel
oꢀ / on
power
mic out
instr out
Note: The transmitter and receiver will remain linked for future usage. At power-
up, the blue RF LED will illuminate, skipping the linking step.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
GLXD4 Receiver Controls and Connectors
ꢈ
ꢈ
ꢀ
ꢁ
rf group
GLXD4
+
gain
-
link channel
oꢀ / on
power
mic out
instr out
ꢄ
ꢅ
ꢂ
ꢃ
ꢆ
ꢇ
10
11
12
13 14
Rear Panel
Front Panel
① Antenna
⑧ Battery Charging Indicator
Two antennas per receiver. Antennas pick up the signal from the transmitter.
Illuminates when battery is in charging bay:
- Red = battery charging
- Green Flashing = battery charge > 90%
- Green = battery charged
② RF Status LED
- ON = Linked transmitter is on
- Flashing = Searching for transmitter
- OFF = Linked transmitter off or transmitter unlinked
- Amber Flashing = charging error, replace battery
⑨ Battery Charging Bay
③ Group Button
Charges transmitter battery while receiver is powered.
Press and hold for two seconds to enable manual group edit.
⑩ Power Switch
④ Link Button
Powers the unit on and off.
Press to manually link receiver to a transmitter or to activate the remote ID
function
⑪ Power Supply Jack
Connect the supplied 15 V DC external power supply.
⑤ Channel
- Momentary press to start a channel scan
- Press and hold 2 seconds to enable manual channel edit
⑫ Mic Out
XLR microphone output jack supplies microphone-level audio output.
⑥ LCD Screen
⑬ USB Port
Displays receiver and transmitter status.
For uploading firmware updates
⑦ Gain Buttons
⑭ Instr Out
Press to increase or decrease transmitter gain in 1 dB increments.
TRS ¼" (6.35mm) audio output. Connect to mixers, recorders, and amplifiers.
Receiver Screen
ꢃ
① Group
ꢂ
Displays the selected group.
ꢈ
② Channel
auto
Displays the selected channel.
ꢆ
③ Transmitter Battery Runtime
Displays remaining battery life in hours and minutes.
Alternatively displays the following battery status:
-
-
-
CALC = battery life calculation
Lo = battery life less than 15 minutes
Err = replace battery
ꢀ
ꢁ
ꢄ
ꢅ
ꢇ
④ Audio Meter
Indicates audio signal level and peaks.
⑦ Transmitter Locked
Displayed when linked transmitter controls are locked.
⑤ Gain
Displays transmitter gain settings (dB).
⑧ Scanning
Indicates a scan is in progress.
⑥ OL Indicator
Indicates audio overload, reduce gain.
⑨ Auto
Indicates that the selected group has backup channels available.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Transmitters
① Antenna
4
3
2
8
Carries wireless signal.
1
off on
② Status LED
LED color and state indicate transmitter status.
③ Power Switch
Turns the transmitter on/off.
GLXD2
on
2
3
④ TA4M Input Jack
Connects to a 4-Pin mini connector (TA4F) microphone or instrument cable.
5
5
6
7
6
⑤ Micro USB Charging Port
Connect to USB battery charger.
⑥ Link Button
- Press and hold within 5 seconds of power-on to manually link with receiver
- Press momentarily to activate Remote ID function
7
⑦ Battery Compartment
Holds 1 Shure rechargeable battery.
1
⑧ Microphone Cartridge
GLXD-2 transmitter models are available with the following cartridge types: SM58,
Beta 58, SM86, Beta 87A.
Wearing the Headworn Microphone
Transmitter Status LED
• Position the headworn microphone 13 mm (1/2 in.) from the corner of your mouth.
• Position lavalier and headworn microphones so that clothing, jewelry, or other
items do not bump or rub against the microphone.
LED is green during normal operation.
LED color or flashing indicates a change in transmitter status as shown in the follow-
ing table:
Color
State
Status
Green
Flashing (slow)
transmitter attempting
relink with receiver
Flashing (fast)
unlinked transmitter
searching for receiver
Flashes 3 times
indicates locked trans-
mitter when power
switch is pressed
13 mm
(.5 in.)
Red
On
battery life < 1 hour
Flashing
battery life < 30
minutes
Red/Green
Amber
Flashing
Flashing
remote ID active
battery error, replace
battery
Correct Microphone Placement
• Hold the microphone within 12 inches from the sound source.
• For a warmer sound with increased bass presence, move the microphone closer to
the sound source.
Wearing the Bodypack Transmitter
• Do not cover grille with hand.
Clip the transmitter to a belt or slide a guitar strap through the transmitter clip as
shown.
For best results, the belt should be pressed against the base of the clip.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Batteries and Charging
GLX-D transmitters are powered by Shure SB902 lithium-ion rechargeable batteries. Advanced battery chemistry maximizes runtimes with zero memory effects, eliminating
the need to discharge batteries prior to charging.
When not in use, recommended battery storage temperature is 10°C (50°F) to 25°C (77°F).
Note: The transmitter will not pass RF or audio signals when connected to the charging cable.
The following battery charging options are available:
Charging from an AC Power
Charging from a USB Port
Receiver Charging Bay
1. Plug the USB charging cable into the
charging port on the transmitter.
Source
The GLXD4 receiver has a built-in charging bay for the
transmitter batteries.
1. Plug the charging cable into the charg-
ing port on the transmitter.
2. Plug the cable into a standard USB port.
1. Insert the battery into the charging bay.
2. Plug the charging cable into an AC power source.
2. Monitor the battery charging indicator on the
front panel until charging is complete.
LED Status During Charging
Charging Times and Transmitter
Runtimes
The following LED states indicate battery status when the transmitter is connected to a
charger:
Use the following table to determine approximate battery runtime based on the
duration of charging time. Times shown are in hours and minutes.
• Green = charging complete
• Green Flashing = battery charge > 90%
• Red = battery charging
Receiver Bay or
AC Power Source
Charging
USB Connection
Charging
Transmitter Runtime
• Amber Flashing = battery error, replace battery
0:15
0:30
1:00
3:00
0:30
1:00
2:00
4:00
up to 1:30
up to 3:00
up to 6:00
up to 16:00*
Installing Transmitter
Batteries
Bodypack Transmitter
*Storage time or excessive heat will reduce maximum runtime.
1. Move the locking lever to the open posi-
Note: GLX-D transmitters automatically power-off after approximately 1 hour
to conserve battery life if the signal from a linked receiver is not detected.
tion and slide the battery door open.
2. Place the battery into the transmitter.
3. Close the battery door and slide the latch to lock.
Important Tips for Care and Storage
of Shure Rechargeable Batteries
Handheld Transmitter
1. Unscrew and remove the battery cover.
2. Place the battery into the transmitter.
3. Replace and tighten the battery cover.
Proper care and storage of Shure batteries results in reliable performance and
ensures a long lifetime.
• Always store batteries and transmitters at room temperature
• Ideally, batteries should be charged to approximately 40% of capacity for
long-term storage
1
• During storage, check batteries every 6 months and recharge to 40% of
capacity as needed
2
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Multiple Receiver Systems
For ease of set up, frequencies are divided into groups to best match the channel requirements for your system.
Select the group by determining the total number of receivers in your system (channel count). All receivers in the system must be set to the same group.
Group
Channel Count (Number of
Receivers)
Number of Backup
Frequencies
Notes
1
2
3
Up to 4
Up to 5*
Up to 8*
3
3
0
Initial factory setting.
Best multi-channel group if you experience interference.
For large multi-channel systems. Only use Group 3 in controlled Wi-Fi envi-
ronments because there are no backup frequencies to avoid interference.
4
1
27
Best single-channel group if you experience interference.
*Environmentally dependent, 4 systems typical
See "Tips to Improve Wireless System Performance" section for additional information.
Setting Up Receivers and Transmitters
Note: Before beginning, turn off all receivers and transmitters. Turn on and set up
each receiver/transmitter pair individually to prevent cross-linking.
- - - -
1. Turn on the first receiver.
group
channel
2. Press and hold the group button to select a group (if necessary) or if the group
is already set, press the channel button to scan for the best available channel.
3. Turn on the first transmitter. The blue rf LED will il-
Note: Dashes appearing on the group and channel display
during a channel scan indicate that frequencies are not avail-
able in the selected group. Choose a group that supports
more receivers and repeat the set up steps.
luminate when a link is established.
Repeat steps 1-3 for each additional receiver and transmitter. Remember to set each
receiver to the same group.
Manually Linking a Transmitter to a Receiver
Use the manual linking option to change the transmitter linked to a receiver. A common use for manual linking is changing the linked transmitter from a bodypack type to a
handheld type.
1. Turn on the transmitter: Within 5 seconds, press and hold the LINK button until the transmitter LED begins to flash green.
2. Press and hold the link button on the receiver: The blue rf LED will flash, and then remain on when the link has been established.
3. Test the audio to verify the link and adjust the gain if necessary.
Combo Systems
A combo system is created by linking two transmitters to a single receiver. Only one transmitter can be active at a time to prevent cross interference. Gain settings for each
transmitter can be independently set and stored when the transmitter is active.
Important! Do not turn on and operate both linked transmitters at any time.
Turn off both transmitters before beginning.
1. Press the group button to select a group. The receiver automatically scans the selected group to find the best available channel.
2. Turn on transmitter 1 and link it to the receiver. Adjust the gain, and then turn off the transmitter.
3. Turn on transmitter 2 and link it to the receiver. Adjust the gain, and then turn off the transmitter.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4 GHz Spectrum Overview
GLX-D operates within the 2.4GHz ISM band which is utilized by Wi-Fi, Bluetooth, and other wireless devices. The benefit of 2.4GHz is that it’s a global band that can be used
anywhere in the world, license free.
Overcoming the Challenges
of 2.4GHz
Coexisting with Wi-Fi
Challenging Wireless
Environments
If you plan to use Wi-Fi during a perfor-
mance, turn on Wi-Fi devices prior to turn-
ing on GLX-D and scanning for the best
channel. GLX-D detects and avoids other
Wi-Fi traffic by scanning the entire 2.4GHz
environment and selecting the 3 best fre-
quencies to transmit on. The result of this is
reliable performance for your GLX-D wire-
less system as well as avoiding Wi-Fi trans-
missions which may be important as well.
The challenge of 2.4GHz is that Wi-Fi traffic can be
unpredictable. GLX-D meets these challenges in the
following ways:
Some environments are more difficult than others for 2.4 GHz
wireless system performance. Additionally, body absorption
has a greater impact in the 2.4 GHz spectrum, compared to
the UHF spectrum. The simplest solution in many cases is to
reduce the transmitter to receiver distance such as placing the
receivers on the stage with a clear line of sight.
• Prioritizes and transmits on the best 3 frequencies
per channel (choosing from a pool of 6 frequencies
across the 2.4GHz band)
Challenging environments include:
• Repeats the most important information such that
one frequency can be taken out entirely without
audio interruption
• Areas with few reflective surfaces such as:
“Bursting” Wi-Fi is harder to detect as it is
periodic; however, because GLX-D repeats
the most important information, even bursts
at very high-levels don’t have an effect on
your audio performance.
- Outdoors
- Buildings with very high ceilings
• Continuously scans during usage to rank all fre-
quencies (both current and backup frequencies)
• 3 or more GLX-D receivers in use
• Strong Wi-Fi presence
• Seamlessly moves away from interference to back-
up frequencies without audio interruption
• Competitive 2.4 GHz systems in use
Note: Unlike analog TV band wireless which typically uses the same type of transmissions across manufacturers, all 2.4GHz wireless currently on the market use different
variations of wireless transmission. These differences make it more difficult to mix and match 2.4 GHz from multiple manufacturers successfully, as can be done with TV band
wireless solutions.
Tips and Methods to Improve Wireless System Performance
If you encounter interference or dropouts, try the following suggestions:
• Scan for the best available channel (press the channel button).
• Locate competitive 2.4 GHz receivers away from each other
• Avoid placing transmitter and receiver where metal or other dense materials
may be present
• Reduce transmitter to receiver distance - for example, place receivers on stage
with a line of sight to the front of the receiver.
• Move the receiver to the top of the equipment rack
• Keep transmitters more than 2 meters (6 feet) apart - this is less critical at
shorter receiver to transmitter distances
• Change the group for all GLX-D systems:
- Single-Chanel System: use Group 4, which is optimized for single-channel use
- Multi-Channel System: use Group 2, which is the most robust wireless group
Note: If transmitters are within 6 inches of non-GLXD transmitters or micro-
phone cartridges, audible noise is possible.
• Move receiver further away from Wi-Fi access points, computers, or other active
2.4 GHz sources. Recommended distance is a minimum of 3 meters (10 feet).
• During sound check, mark trouble spots and ask presenters or performers to
avoid those areas
• Disable non-critical Wi-Fi on computers, cell phones, and other portable devices
• If there is a known strong source of Wi-Fi and you specifically want to use fre-
quencies within that Wi-Fi channel, use the following Group/Channel of GLX-D
(best option listed first):
- If you plan to use Wi-Fi during a performance, turn on Wi-Fi prior to turning on
GLX-D and scanning for the best channel.
• Keep the transmitter and receiver more than 2 meters (6 feet) apart
- Wi-Fi 1: Group 3/Channel 8, Group 3/Channel 4
- Wi-Fi 6: Group 3/Channel 7, Group 3/Channel 5
- Wi-Fi 11: Group 3/Channel 2, Group 3/Channel 1
• Avoid heavy Wi-Fi traffic activities such as downloading large files or viewing a
movie.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4 GHz Frequency Tables
The following tables list receiver channels, frequencies, and latency for each group:
Group 1: Channels 1-4 (latency = 4.0 ms)
Group 2: Channels 1-5 (latency = 7.3 ms)
Group/Channel
Frequencies
Group/Channel
Frequencies
2/1
2/2
2/3
2/4
2/5
2423 2424 2443 2444 2473 2474
2404 2405 2426 2427 2456 2457
2410 2411 2431 2432 2448 2449
2417 2418 2451 2452 2468 2469
2437 2438 2462 2463 2477 2478
1/1
1/2
1/3
1/4
2424 2425 2442 2443 2462 2464
2418 2419 2448 2450 2469 2471
2411 2413 2430 2431 2476 2477
2405 2406 2436 2437 2455 2457
Group 3: Channels 1-8 (latency = 7.3 ms)
Group 4: Channel 1 (latency = 7.3 ms)
Group/Channel
Frequencies
Group/
Frequencies
Channel
3/1
3/2
3/3
3/4
3/5
3/6
3/7
3/8
2415 2416 2443
2422 2423 2439
2426 2427 2457
2447 2448 2468
2409 2451 2452
2431 2462 2463
2404 2473 2474
2435 2477 2478
4/1
2404 2405 2410 2411 2417 2418 2423 2424 2426 2427
2431 2432 2437 2438 2443 2444 2448 2449 2451 2452
2456 2457 2462 2463 2468 2469 2473 2474 2477 2478
Choose a group with more channels and repeat set up steps.
Firmware
Firmware is embedded software in each component that controls functionality. Periodically, new versions of firmware are developed to incorporate additional features and en-
hancements. To take advantage of design improvements, new versions of the firmware can be downloaded and installed using the Shure Update Utility tool.
Connect to the Computer
Connect the device to your computer using the USB to Micro USB cable supplied with your GLX-D system.
GLXD4
oꢀ / on
power
mic out
instr out
GLXD6
GLXD1
GLXD2
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Gain Adjustment
Use the gain buttons on the receiver to increase or decrease the gain of a linked
transmitter:
rf grou
p
+
gain
-
• Turn on the linked transmitter and momentarily press the gain buttons to adjust
the gain in 1 dB increments
• For faster gain adjustments, press and hold the gain buttons
link
channe
l
Tip: Monitor the audio and observe the receiver audio meter level while adjusting the
gain to prevent signal overload.
Locking and Unlocking the Controls
The controls of the receiver and transmitter can be locked to prevent accidental or unauthorized changes to settings.
Note: Locks are not affected by power cycles.
Locking the Receiver Controls
Locking the Transmitter Power Switch
Simultaneously press and hold the group and channel buttons
until LK appears on the LCD. Repeat to unlock.
Starting with the transmitter set to off, press and hold the LINK button while turning on
the transmitter. Continue to hold the link button until the lock icon appears on the re-
ceiver LCD. Repeat sequence to unlock.
•
•
LK is displayed if a locked control is pressed
Optionally, the transmitter power switch can be remotely locked from the receiver front panel:
UN is displayed momentarily to confirm the unlock command
Simultaneously press and hold the group and link buttons for approximately 2 seconds until the
flashing lock icon appears on the receiver LCD. Repeat sequence to unlock.
Identifying Linked Transmitters and Receivers with Remote ID
Use the Remote ID feature to identify linked transmitter and receiver pairs in multiple receiver systems. When Remote ID is active, the receiver LCD will blink and display ID.
The status LED of the corresponding transmitter will alternately flash red and green for approximately 45 seconds.
To activate Remote ID:
1. Momentarily press the link button on the transmitter or receiver.
GLXD2
on
2. The LCD of the linked receiver will blink and display ID and the sta-
tus LED on the linked transmitter will flash red/green.
rf group
GLXD4
+
gain
-
ID
link channel
3. To exit Remote ID mode, momentarily press the link but-
ton or allow the function to timeout.
I
Manually Selecting a Group and Channel
Specific groups and channels can be assigned to the receiver instead of using the automatic scan function.
Note: Group 3 should only be used in controlled Wi-Fi environments to prevent interference from unexpected Wi-Fi devices.
Selecting a Group
Selecting a Channel
1. Press and hold the group button for 2 seconds until the group display flashes.
1. Press and hold the channel button for 2 sec-
onds until the channel display flashes.
2. Press the group button to scroll through the available groups.
2. Press the channel button to scroll through the available channels.
3. The receiver will automatically save the selected group.
3. The receiver will automatically save the selected channel.
Note: A double dash symbol-- displayed on the receiver screen during a chan-
nel scan indicates that there are no available channels within the selected group.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Issue
Indicator Status
Solution
No sound or faint sound
Receiver RF LED on
• Verify all sound system connections or adjust gain as needed
(see Adjusting Gain).
• Verify that the receiver is connected to mixer/amplifier.
Receiver RF LED off
• Turn on transmitter.
• Make sure the batteries are installed correctly.
• Link transmitter and receiver (see Linking topic).
• Charge or change transmitter battery.
Receiver LCD screen off
• Make sure AC adapter is securely plugged into electrical
outlet.
• Make sure receiver is powered on.
Transmitter indicator LED
flashing red
Charge or change transmitter battery.
Transmitter plugged into
charger.
Disconnect transmitter from charger.
Audio artifacts or dropouts
rf LED flickering or off
• Change receiver and transmitter to a different group and/or
channel.
• Identify nearby sources of interference (cell phones, Wi-Fi ac-
cess points, signal processor, etc...) and shutdown or remove
source.
• Charge or change transmitter battery.
• Ensure that receiver and transmitter are positioned within sys-
tem parameters.
• System must be set up within recommended range and re-
ceiver kept away from metallic surfaces.
• Transmitter must be used in line of sight from receiver for op-
timal sound.
Distortion
OL indicator appears on re-
ceiver LCD
Reduce transmitter gain (see Gain Adjustment).
Transmitter and receiver link unsuccessful
Transmitter and receiver LEDs Update both components to firmware version 2.0 or greater.
flash to indicate that linking
started, but the link fails
Download the Shure Update Utility application and follow the
instructions.
Sound level variations when switching to different N/A
sources
Adjust transmitter gain as necessary (see Gain Adjustment).
Receiver/transmitter won't turn off
Transmitter LED flashing
Controls locked. See Locking and Unlocking Controls.
rapidly
Receiver gain control cannot be adjusted
Receiver controls cannot be adjusted
Transmitter ID function does not respond
N/A
Check transmitter. Transmitter must be on to enable gain
changes.
LK shown on receiver display
when buttons are pressed
Controls locked. See Locking and Unlocking Controls.
Transmitter LED flashes green Controls locked. See Locking and Unlocking Controls.
3 times
Transmitter information does not appear on the
Receiver LCD
N/A
Linked transmitter is off or the receiver is not linked to a
transmitter.
Transmitter powers off after 1 hour
Transmitter status LED off
GLX-D transmitters automatically power-off after 1 hour to con-
serve battery life if the signal from a linked receiver is not de-
tected. Make sure that linked receiver is turned on.
Resetting Components
Use the reset function if it is necessary to restore the transmitter or receiver to their factory settings.
Resetting the Receiver
Resetting the Transmitter
Restores the receiver to the following factory settings:
Restores the transmitter to the following factory settings:
• Gain level = default
• Controls = unlocked
• Controls = unlocked
Press and hold the transmitter link button while turning on the transmitter until power
LED goes off.
Press and hold the link button while turning on the receiver power until the LCD
displays RE.
When the link button is released, the transmitter will automatically initiate linking to
find an available receiver. Press the link button on an available receiver to relink.
Note: When reset is complete, the receiver will automatically initiate linking to
search for a transmitter. Press and hold the transmitter link button within five sec-
onds of powering-on to complete the link.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Tuning Bandwidth
Total Harmonic Distortion
2400– 2483. 5 MHz
0. 2% , typical
Working Range
RF Output Power
10 mW E.I.R.P. max
Indoors Up to 30 m (100 ft ) typical , Up to 60 m (200 ft ) maximum
Operating Temperature Range
Outdoors Up to 20 m (65 ft ) typical , Up to 50 m (165 ft ) maximum
-18°C (0°F) to 57°C (135°F)
Note: Actual range depends on RF signal absorption, reflection and interference.
Note: Battery characteristics may limit this range.
Transmit Mode
Storage Temperature Range
Frequency Hopping
-29°C (-20°F) to 74°C (165°F)
Audio Frequency Response
Polarity
20 Hz – 20 kHz
Note: Dependent on microphone type
Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone
plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the
tip of the high impedance 1/4-inch output.
Dynamic Range
Battery Life
120 dB , A-weighted
Up to 16 hours
RF Sensitivity
Channel Count
-88 dBm , typical
4 typical , Up to 8 maximum
GLXD1
GLXD2
Dimensions
Dimensions
90 x 65 x 23 mm (3. 56 x 2. 54 x 0. 90in. ), H x W x D (without antenna )
Model
A
B
C
Power Requirements
3. 7 V Rechargeable Li-Ion
SM58
51 mm, 2.0 in.
51 mm, 2.0 in.
49 mm, 1.9 in.
51 mm, 2.0 in.
252 mm, 9.9 in. 37 mm, 1.5 in.
252 mm, 9.9 in. 37 mm, 1.5 in.
252 mm, 9.9 in. 37 mm, 1.5 in.
252 mm, 9.9 in. 37 mm, 1.5 in.
Housing
BETA 58
SM86
Cast Metal , Black Powdercoat
Input Impedance
900 kΩ
BETA 87A
RF Output Power
10 mW E.I.R.P. max
B
Transmitter Input
Connector
4-Pin male mini connector (TA4M)
A
C
Configuration
Unbalanced
Maximum Input Level
1 kHz at 1% THD
+8. 4 dBV (7. 5 Vp-p )
Weight
Antenna Type
Internal Monopole
Pin Assignments
TA4M
SM58 267 g (9. 4 oz. ) without batteries
BETA 58 221 g (7. 8 oz. ) without batteries
SM86 275 g (9. 1 oz. ) without batteries
BETA 87A 264 g (9. 3 oz. ) without batteries
1
2
3
4
ground (cable shield )
+ 5 V Bias
audio
Housing
Tied through active load to ground (On instrument
adapter cable, pin 4 floats )
Molded Plastic
Power Requirements
3. 7 V Rechargeable Li-Ion
RF Output Power
10 mW E.I.R.P. max
Maximum Input Level
SM58 146 dB SPL
BETA 58 147 dB SPL
SM86 143 dB SPL
BETA 87A 147 dB SPL
12
Download from Www.Somanuals.com. All Manuals Search And Download.
GLXD4
Certifications
Dimensions
This device complies with part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
40 x 183 x 117 mm (1. 6 x 7. 2 x 4. 6 in. ), H x W x D
Weight
286 g (10. 1 oz. ) without batteries
This wireless system operates in the globally available ISM band 2400 MHz to
2483.5 MHz. The operation does not require a user license.
Housing
Molded Plastic
Power Requirements
Meets requirements of the following standards: EN 300 328, EN 301 489 Parts 1 and
9, EN60065.
14 to 18 V DC (Tip positive with respect to ring ), 550 mA
Spurious Rejection
Meets essential requirements of the following European Directives:
• R&TTE Directive 99/5/EC
> 35 dB , typical
Gain Adjustment Range
-20 to 40 dB in 1 dB steps
•
WEEE Directive 2002/96/EC, as amended by 2008/34/EC
Phantom Power Protection
• RoHS Directive 2002/95/EC, as amended by 2008/35/EC
Yes
Note: Please follow your regional recycling scheme for batteries and electronic
waste
Certified by IC in Canada under RSS-210 and RSS-GEN.
IC: 616A-GLXD1, 616A-GLXD2, 616A-GLXD4
Configuration
XLR Output Impedance balanced
6.35 mm (1/4") output Impedance balanced
Certified under FCC Part 15.
FCC ID: DD4GLXD1, DD4GLXD2, DD4GLXD4
Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B)
Impedance
XLR Output 100 Ω
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation of this device is subject to the following two conditions: (1) this device may
not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
6.35 mm (1/4") output 100 Ω
(50 Ω , Unbalanced )
Maximum Audio Output Level
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux ap-
pareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
XLR connector (into 600 Ω load ) +1 dBV
6.35 mm (1/4") connector (into 3 kΩ load ) +8. 5 dBV
Pin Assignments
XLR Output 1=ground, 2=hot, 3=cold
6.35 mm (1/4") connector Tip=audio, Ring=no audio, Sleeve=ground
The CE Declaration of Conformity can be obtained from Shure Incorporated or any of
compliance
Receiver Antenna Input
Authorized European representative:
Shure Europe GmbH
Impedance
50 Ω
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Antenna Type
½ Wave Sleeve Dipole , non-removable
Maximum Input Level
−20 dBm
Fax: 49-7262-92 49 11 4
Email: [email protected]
Output Connections
Information to the user
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
22µF
50 Ω
22 µF
50 Ω
22 µF
50 Ω
2
1
• Reorient or relocate the receiving antenna.
3
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
22µF
50 Ω
• Consult the dealer or an experienced radio/TV technician for help.
This wireless system operates in the globally available ISM band 2400 MHz to
2483.5 MHz. The operation does not require a user license.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|