.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
TABLE OF CONTENTS
A. REMOTE TRANSMITTER OPERATION ..............................................5
B. 2-WAY LCD REMOTE CONTROL TRANSCEIVER OPERATION ONLY .......6
C. LED DISPLAY..............................................................................6
D. CHIRP INDICATOR ......................................................................6
E. PARKING LIGHT..........................................................................6
F. ALARM OPERATION CONDITION....................................................6
G. ACTIVE ARMING – ARM & LOCK.................................................7-8
Ajar Warning
Silent Arming / Disarming
Noiseless Mode
Shock Sensor By-Pass
Hidden Alarm Function
H. PASSIVE ARMING........................................................................8
Passive Arming with Passive Door Locking
Passive Arming By-Pass
I. ACTIVE DISARMING – UNLOCK & DISARM......................................9
Tamper Disarming
Pathway Illumination
Two Steps Door Unlock
Automatic Re-Arm
J. DISARMING WITHOUT A TRANSMITTER...................................10-11
Overrides the Alarm without Password Pin Code
Overrides the Alarm With Password Pin Code
K. VALET MODE ............................................................................11
Enter Valet Mode
Exit Valet Mode
Remote Valet Mode
L. CAR LOCATOR ..........................................................................12
M. PANIC FUNCTION......................................................................12
N. TRIGGER THE SYSTEM ..........................................................12-13
Clear The Trigger Icons and Melody Sound
26
3
500SOM 01/05
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
TABLE OF CONTENTS
O. ANTI CAR- JACKING..............................................................13-14
Active Car Jacking
Passive Anti Car Jacking
Trigger The Anti Car Jacking Mode
Override The System To Turn Off Anti Car Jacking
P. SYSTEM’S TRIGGER CHECK ........................................................15
Q. SYSTEM’S STATUS CHECK ..........................................................15
R. DRIVER PAGING........................................................................15
S. DOME LIGHT CONVENIENCE DELAY & SUPERVISION......................15
T. IGNITION CONTROL THE DOOR LOCK/UNLOCK .............................16
U. TRUNK RELEASE (CHANNEL 3) OUTPUT........................................16
V. CHANNEL 4 TIMER CONTROL OUTPUT..........................................16
W. POWER ON MEMORY:.................................................................16
A. BATTERY REPLACEMENT.............................................................17
B. THE REMOTE LCD ICONS WITH FUNCTION...............................17-18
C. PROGRAMMING OF THE LCD REMOTE TRANSCEIVER ................19-21
Screen Lamp ON
Power Save Mode
Clear The Flash Icon and Melody Sound
Stop The Melody Sound.
Button Lock
Vibration / Melody Mode
Enable / Disable Bi Sound While Pressing Button:
Low Battery Indication.
Set Up Fixed Count Down Timer
Out Of The Range Check
D. TIMER SETTING ...................................................................22-24
Timer Setting.
Alert Alarm Timer Setting
Count Down Timer Setting
4
25
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
LCD REMOTE CONTROL TRANSCEIVER
IMPORTANT NOTICE
4. Press the F button once again then the “Minutes” digit flashes
WARNINGS:
for adjusting.
As with any product that performs automatic functions, there are certain
safety precautions that you must practice and be aware of.
1. Keep ALL transmitters out of the reach of children.
2. The use and operations of this system is the sole responsibility of the
operator.
5. Press the
or
button to decrease or increase the “Minute” digit
until 2:30.
6. Press the F button once again then
icon flashes for the alert
alarm “ON / OFF” setting
7. Press the button to start the count down timer, and the “ON” icon
will display on the LCD screen. Press the
button to stop the count
down timer, and the “OFF” icon will display on the LCD screen.
8. Press the F button for 2 seconds with one-melody sound to
confirm exiting the timer program mode.
OPERATION
A. REMOTE TRANSMITTER OPERATION:
Transmitter
Note: Maximum is 19 hours.
Button
System Function or Feature
Remark
Lock Doors & Arm System
-
Arm and Delete The 2 Stage Shock Sensor. Press twice within 3 seconds
-
-
Arm and Noiseless Mode
Press within 3 seconds
Press within 3 seconds
Ignition in "off" position.
-
Arm System and Hidden Alarm Function
Silent Arming / Disarming
+
+
(2-sec.) Active Anti Car-Jacking Mode
Ignition in "on" position press
and hold for 2 seconds
Unlock Doors & Disarm System
-
Two Steps Door Unlock & Disarm System
Press twice within 3 seconds.
Press and Hold for 2 seconds
While the system Disarmed.
(2-sec.)
-
Trunk Release (Channel 3)
Passive Arming By-pass
-
-
Remote Control Entry/Exit Valet Mode
While the system Disarmed,
Press within 3 seconds
+
Channel # 4 Timer Output
Car Locator
(3-sec.)
Panic function
Press and Hold for 3 seconds.
5
24
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
LCD REMOTE CONTROL TRANSCEIVER
OPERATION
1. Timer Setting: Example to 10:30 AM
B. TWO-WAY LCD REMOTE CONTROL TRANSCEIVER OPERATION:
Transceiver
1. Press & hold the F button for 3 seconds, with two-melody sounds
and the “Hours” digit flashing for adjusting.
Button
System Function
Remark
2. Press the
or
button to decrease or increase the “Hour” digit
F -
(C)
System’s Trigger Check
System’s Status Check
Press within 3 seconds
Press within 3 seconds
until 10:00xx
F - F -
(C)
3. Press the F button once again then the “Minute” digit flashes for
adjusting.
F -
( )
Optional Driving Pager
Press within 3 seconds
4. Press the
or button to decrease or increase the “Minutes” digit
F (1 sec.)
F - F - F
LCD screen lamp turns on for 5 seconds. Press and hold for 1 second
until 10:30AM.
Clear the Flash Icon and Melody Sound Press within 3 seconds
5. Press the F button for 2 seconds with one-melody sound to confirm
exiting the timer program mode.
on the LCD Screen Transmitter
2. Alarm Timer Setting: Example to 6:30 PM
C. LED Status Display Chart:
1. Press and hold the button for 3 seconds, with two-melody sound
and the “Hours” digit flashing for adjusting.
LED
Status
LED
Status
Off
Disarmed
2 flashes... pause Zone 2 / Trigger on Trunk/Hood
3 flashes... pause Zone 3 / Trigger on Door Switch
4 flashes... pause Zone 4 / Trigger on Shock Sensor
5 flashes... pause Zone 5 / Trigger on Ignition Switch
2. Press the F button twice, the LCD screen will shows the
icon
Slow flash Armed
Fast flash Passive arming
On (solid) Valet mode
and the “Hours” digit will flash for adjusting.
3. Press the
or
button to decrease or increase the “Hour” digit
until 6:xxPM.
4. Press the F button once again then the “Minutes” digit flashes
for adjusting.
D. Chirp Indicators
E. Parking Light Indicator Display Chart:
5. Press the
or button to decrease or increase the “Minutes” digit
1 Chirp
Arm
1 Flash
Arm
until 6:30PM.
6. Press the F button once again then
icon flashes for the alarm
2 Chirps
3 Chirps
6 Chirps
Disarm
2 Flashes
3 Flashes
12 Flashes
Disarm
“ON or OFF” setting.
Ajar Warning
Car Locator
Triggered
Car Locator
7. Press the
button to stop the “Alert Alarm Timer”, and the “OFF”
icon will show on the LCD screen.
8. Press F button for 2 seconds with one-melody sound to confirm
exiting the timer program mode.
F. SYSTEM OPERATING CONDITION:
Siren, Horn Parking Light
1 or 3 Chirps 1 Flash
LED
Slow Flash
Doors
Locking
Starter
Disable
Dome Light
3. Count Down Timer Setting: Example Set count down
timer at 2:30.
1. Arming
2. Disarming
2 or 4 Chirps 2 or 3 Flashes Fast Flash or Off Unlocking
Turns on for
30 seconds
Flashes
Flashes
Flashes
1. Press and hold the F button for 3 seconds, with two-melody
sounds and the “Hours” digit flashing for adjusting.
2. Press the F button 5 times, the LCD screen will shows the
icon and the “Hours” digit is flashes for adjusting.
3. Trigger
4. Panic
5. Car-Jacking Alarming
Alarming
Alarming
Flashes
Flashes
Flashes
Slow Flash
Disable
Disable
3. Press the
or
button to decrease or increase the “Hour” digit
until 2:xx.
6. Car Locator
6 Chirps
12 Flashes
6
23
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
LCD REMOTE CONTROL TRANSCEIVER
OPERATION
D. TIMER SETTING CHART:
Transceiver
G. ACTIVE ARMING – LOCK AND ARM:
1. Press the button on the transmitter.
2. The siren will chirp (1) time and the parking lights will flash (1) time
indicating that the system is now Armed. The vehicle’s doors will lock
upon arming.
Press
Button
Description
Transceiver Button
1
Press and hold the
Timer Setting (Hour)
for – and
for – and
for – and
for +
for +
or +
F
button for 3 sec.
*Flash digit for adjusting
System Arm Door Ajar Trunk/Hood Ajar
Clear The Flash Icon:
Pressing the F button
3 times within 3 seconds
will clear the flash icon
on the LCD screen
Press the
F
button once
Time setting (Minute)
*Flash digit for adjusting
2
Press the
F
button once.
Alert Alarm
Time Setting (Hour)
*Flash digit for adjusting
transmitter.
Press the
F
button once
Alert Alarm
for – and
for +
AJAR WARNING: If the siren chirps (3) times, you have left a door,
trunk, or hood lid ajar. (See Alarm Feature I-3 Programming.)
Time Setting (Minute)
*Flash digit for adjusting
SILENT ARMING / DISARMING: Pressing the transmitters and
buttons at the same time will arm or disarm your security system.. No
chirping sound will be heard and the arm / disarm confirmation will be
visiblelwith the parking lights only.
Press the
Press the
F
F
button once
button once
Alert Alarm Setting ON/OFF
for OFFand for ON
3
Count Down
for – and
for +
Timer Setting (Hour)
*Flash digit for adjusting
(Max.19 hours 59 minutes)
SHOCK SENSOR BY-PASS: Pressing the button on the transmitter (2)
times within 3 seconds will arm the security system and by-pass the
shock sensor. The system will chirp one additional time to confirm the
sensor bypass mode was activated. The sensor bypass feature is programmed
to activate for (1) arming cycle only. The security system will return to
normal operation during the next arming cycle.
Press the
Press the
F
F
button once
button once
Count down Timer Setting
(Minute)
for – and
for +
*Flash digit for adjusting
Count down Timer
Setting ON/OFF
for OFFand for ON
NOISELESS MODE: Press the button (1) time to arm the system..
Press the button (2) more times within 3 seconds: The siren will chirp
(1) more time. The system is now in “Noiseless Mode”. In Noiseless
mode the zone 4 shock sensor timer will be reduced from 30 seconds to
15 seconds. The noiseless feature is programmed to activate for (1) arming
cycle only. The security system will return to normal operation during the
next arming cycle.
EXIT: Press and hold the F button for 2 seconds or leave it for 10 seconds
and the system will automatically exit the programming mode.
22
7
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
OPERATION
LCD REMOTE CONTROL TRANSCEIVER
HIDDEN ALARM FUNCTION: Press the
button first then within 3
8. Low Battery Indication:
When the power of the battery weakens, it has [2] short beep sounds
seconds, press the button to activate the “Hidden Alarm Function”.
The security system will arm and be in “Hidden Alarm Function”. The
siren or horn will be silenced even if the sensor is triggered in the armed
status.
and the icon will flash while pressing the button of the LCD screen
transceiver.
9. Set Up Fixed Count Down (Parking) Timer:
1. Press the F button first, within 3 seconds press and hold the
button for 2 seconds, the LCD screen will show the icon and timer
(ie.0:10).
H. PASSIVE ARMING (See Alarm Feature II-2 Programming.)
Active Arming / Disarming will allow you to operate your security system
with the remote transmitter only. This security system is equipped with
an optional “Passive Arming” feature, which allows the security system
to automatically arm 30 seconds after the last door is closed.
2. Press the
button again showing next order time on the screen
(ie.0:20), press them again (ie.0:30) and so on.
3. The buttons will start counting down then the
icon will flash.
Note: 1. The count down period is fixed as 10 minutes, 20 minutes,
30 minutes, 1 hour, 1.5 hours and 2 hours maximum.
2. When the count down timer is showing 0:00 that means to
turn off the timer.
To enter Passive Arming:
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for
30 seconds. If you re-open the doors, hood or trunk, the security system
LED will stop flashing. It will begin flashing again once the vehicle’s
entrances are closed.
3. Press F button for real time indication when the timer is
counting down.
3. After the 30-second timer has elapsed, the security system will
automatically “ARM”. The siren will [1] chirp and the parking lights
will flash [1] time and remain ON for 10 seconds.
10. Out Of Range Indication:
If this feature is selected, the security system will automatically check the
range every 20 minutes after the system is armed.
PASSIVE DOOR LOCKING:
The vehicle doors will automatically lock after passive arming cycle has
been completed.
1. If the user is within range, the
icon will display on the LCD screen.
2. If user is out of range, it has five short beeps sounds and the
icon will disappear on the LCD screen.
PASSIVE ARMING BY-PASS: While the system is disarmed, press the
button twice, the system will respond with [1] chirp and the LED will
turn “ON”. The security system will remain in this temporary state until
exited. To exit Passive By-pass, press the transmitters or
and the system will return to normal status.
buttons
8
21
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
OPERATION
LCD REMOTE CONTROL TRANSCEIVER
I. ACTIVE DISARMING – UNLOCK AND DISARM:
1. Press the button on the transmitter.
1. Screen Lamp ON: Press and hold the F button for [1] second, the
melody will sound and the LCD screen light will turn “ON” for 5 seconds.
2. Power Save Mode: While in power save mode, the LCD
remote transmitter uses “0” current to save the battery
power.
2. The siren will chirp [2] times and the parking lights will flash [2]
times and then remain “ON” for 30 seconds to indicating that the
security system is now “Disarmed”.
Entry: Press and hold the F button for 5 seconds, with one
melody sound and SAVE icon on the screen to indicate entry
of the “power save mode”.
3. The vehicle’s doors will unlock and the dome light will turn on for 30
seconds upon disarming.
System
Disarm
Doors
Trigger
Trunk/Hood Shock Sensor
Trigger Trigger
Exit: Press any button on the LCD remote transmitter to exit
the “power save mode”.
3. Clear the Flash Icon and Melody Sound: Pressing the F button
3 times within 3 seconds will clear the flashing icon and the melody
sound on the LCD screen transceiver.
4. Stop The Trigger Melody Sound: While triggering the alarm the LCD
screen will alert the user through a melody sound and flashing trigger
icon, press any button on the LCD remote transmitter to stop the melody
sound only.
5. Button Lock: It is useful if you want to disable the trans-
mission function of the remote transmitter temporarily to
prevent any accidental pressing of buttons. Press the F button
then within 3 seconds press and hold the ( ) button for 2
seconds to activate or cancel the button lock function, the
icon will display on the LCD screen to show the LCD remote
transmitter is on “button lock”.
Ignition Trigger CLEAR THE FLASH ICON: Pressing the F button 3
times within 3 seconds will clear the flash icon on
the LCD screen transceiver.
TAMPER DISARMING: If the alarm is triggered, upon
disarm of the system, the siren will chirp 4 times and
the parking lights will flash 3 times.
PATHWAY ILLUMINATION: This
feature turns the parking light “ON” for 30 seconds
upon an unlock signal and for 10 seconds for a lock
signal.
6. Vibration / Melody Mode: It is useful when you are in a
noisy place and difficult to hear the beep sounds from the
remote control. The remote will vibrate when the security
system is violated. Press the F button first, then
within 3 seconds press and hold the
(
)
button for 2
Two Step Door Unlock: This feature will independently unlock the
driver’s door only when disarming the security system. Pressing the
button a second time within 3 seconds will unlock the other doors.
seconds to select the mode of vibration or melody. The
icon will be displayed on the LCD screen to show the remote transceiver
is on vibration mode.
7. Enable/Disable Bi Sound while Pressing Button:
It has a short “bi” sound while pressing the
transmitter. If you want to mute the sound, press the F button first then
Automatic Rearm: If this feature is selected, the security system will
automatically re-arm itself in 60 seconds after disarming with the remote
transmitter. “Automatic Rearm” will cancel if any door is opened
before the 60 second timer has elapsed.
button of the LCD remote
within 3 seconds press and hold the
disable the sound.
(Bi) button for 2 seconds to
20
9
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
OPERATION
LCD REMOTE CONTROL TRANSCEIVER
J. DISARMING WITHOUT A TRANSMITTER
Overriding the Alarm without a Password Pin Code: (Factory Default
Setting)
C. PROGRAMMING THE LCD REMOTE TRANSMITTER:
Transmitter
Button
Description
Operation
The Override function may be used if the remote transmitter is lost or
inoperative.
F
F
F
F
(1 sec.)
(3 sec.)
(5 sec.)
LCD Screen Lamp Turns
On for 5 Sec.
Press and hold for 1 sec.
1. Enter the vehicle and turn the ignition switch to the “ON” position.
(The alarm will sound.)
2. Within 10 seconds push and release the valet/program switch. The
alarm will stop sounding and enter the disarm mode. You can now start
and operate the vehicle normally.
1 melody sound will confirm.
Timer Programming Mode
Press and hold for 3 sec.
2-melody sounds will confirm.
Power Save Mode
Press and hold for 5 sec.
Override the Alarm with Password Pin Code: (See Alarm Feature IV-
2 Programming.)
1 melody sound will confirm.
Unlike the valet switch easily found and defeated, this security system allows
the consumer to program a password pin code. This feature will offer a
higher level of security protection
-
-
F
-
F
Clear the Flash Icon and
Melody Sound on the LCD
Screen Transmitter
Press within 3 sec.
Press within 3 sec.
To Operate Password Pin Code:
1. Enter the vehicle and turn the ignition switch to the “ON” position.
(The alarm will sound.)
F
(2-sec.)
Button Lock ( ) enable /
disable
2. Within 5 seconds, enter your chosen first digit code by pressing and
releasing the valet/program switch.
F
-
-
(2 sec.)
(2-sec.)
Melody / Vibration (
)
Press within 3 sec.
3. Within 15 seconds of the last digit code enter (the 1st code), turn the
ignition switch “OFF” and then back to the “ON” position.
4. Within 15 seconds, enter your chosen second digit code by pressing
and releasing the valet/program switch.
F
Program Count Down
Press within 3 sec. cycling
(Parking) Timer (10-Minute/ leave the buttons starting
5. Turn the ignition switch to the “OFF” position. [4] Chirps from the siren
or horn and [3] flashes from the parking lights will indicate the system
was disarmed.
20M/30 M/1Hour/1.5H/2.0H) count down then
flashes
F
-
(2 sec.)
Enable/disable Bi sound (Bi)
while pressing button
Example: To Override the System with the Password Code 83, you
would;
1. Enter the vehicle and turn the ignition switch to the “ON” position.
(The alarm will sound.)
2. Within 5 seconds, press and release the valet/program switch 8
times.
10
19
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
OPERATION
LCD REMOTE CONTROL TRANSCEIVER
3. Within 15 seconds of the last digit code enter, turn the
Ignition switch from “Off” to “ON”.
Remote Transmission
You are transmitting the signal
to the control unit.
In-Range Indicator
The system is within the
remote control range.
4. Within 15 seconds, press and release the valet/program switch 3
times.
5. Turn the ignition switch to the “Off” position. [4] Chirps from the siren
or horn and [3] flashes from parking lights will indicate the system was
disarmed.
Door Open Warning
Doors are opened.
(Zone 3)
Trunk/Hood Trigger
Trunk or Hood is opened.
(Zone 2)
Shock Sensor Trigger
Trigger on Shock Sensor
(Zone 4)
Warn Away Trigger
Trigger on Shock Sensor
(Zone 1)
K. VALET MODE: (Disarm or Valet mode)
The valet/program switch allows you to temporarily bypass all alarm
functions, eliminating the need to hand your transmitter to parking
attendants or garage mechanics. When the system is in “valet mode”, all
alarm functions and remote starter functions are bypassed, however the
remote panic feature and remote door locks will remain operational. To use
the valet mode, the system must first be disarmed either by using you
remote transmitter, or by operating the manual override sequence.
To Enter Valet Mode:
Time Monitor
Alert Alarm
You have set morning call
alarm.
Count Down (Parking) Timer
Reminder when your time is
up for parking.
Power Save Mode
Save the battery power.
system is triggered.
1. With the unit DISARMED, turn ignition to the “ON” position.
2. Press and hold the valet/program switch for 2 seconds or until the
LED turns on. The LED will remain on and solid for as long as the system
is in “Valet Mode”.
Vibration Mode
Remote vibrates when the
system is triggered.
Button Lock
Disable the transmission
function temporarily.
To Exit Valet Mode:
1. Returning to normal operation, turn ignition switch to the “ON” position.
2. Press and hold the valet/program switch for 2 seconds. The LED will
turn “OFF” indicating the system is out of “Valet Mode”.
Driver Paging
Someone is paging you in front
of your vehicle.
Low Battery
Your must replace the battery
in the remote control.
Remote Valet: ( Disarm or Valet mode)
Press and release the button on the trans-
Remote
Remote
Door Lock Door Unlock
mitter three times within 3 seconds to
enter or exit valet mode. [1] parking light
flash will confirm you have entered “Valet
Mode” and [2]parking light flashes will
confirm you have exited “Valet Mode”.
18
11
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
LCD REMOTE CONTROL TRANSCEIVER
Note:**** If the system is interfered with by stronger
OPERATION
L. CAR FINDER:
With the unit Armed, press the
button to activate the Car
radio frequencies, sources of high voltage, electric
power or obstacles like tall buildings, the transmission
range may get shorter as this system uses a low
powered output frequency.
finder function. The siren will chirp 6 times and the
parking lights will flash 12 times to locate your vehicle.
M. PANIC FUNCTION:
The transmitter can be used as a remote panic button to
manually trigger the alarm in case of emergency.
To enter “Panic Mode”:
1. Press and hold the
button for 3 seconds. The alarm will
A. BATTERY REPLACEMENT:
A 1.5V type AAA Alkaline battery powers the Remote Transmitter.
immediately sound.
2. During “Panic Mode”, the normal function of this transmitter button will
be suspended. The transmitters and buttons can be used to lock
When the power of the battery weakens, a icon will be displayed on the
LCD screen. When the old battery is replaced with a new one, a beeping
sound will indicate the power is up and the clock on the LCD screen will
return to AM12:00 after displaying all the icons. Reset the correct time by
pressing F for 3 seconds before using the remote control (See Timer
Setting.) Press the button twice when the battery compartment
is empty, then insert the new battery.
and unlock the doors, however once the button is pressed, the vehicle’s
starter disable device, (if installed) will be disabled allowing the vehicle
to start.
3. To stop the alarm, press and hold the
button on the transmitter again
or or is
for 3 seconds. Also, if any transmitter button other than
pressed and released, the panic mode will be turned off immediately.
4. If the button is not pressed, the alarm wil automatically stop after 30
seconds.
Note: Press the button [2] times with
the battery removed from the remote,
then insert the new battery.
N. TRIGGER THE ALARM SYSTEM
When Armed, your vehicle is protected as follows:
1. Light impact will trigger the warn-away signal.
2. Heavy impacts, doors opening, hood opening, trunk opening or turning
the ignition “ON” will trigger the programmed sequence. The starter
disable relay (if installed) prevents the vehicle’s starter from cranking.
The siren, horn, parking lights, and dome light will turn on to alert
an intrusion for 30 seconds. The system will then stop and automatic
reset or re-arm. If one of the sensors or detectors is active, the alarm
system will sound a maximum of 6 times in 30 seconds cycles.
B. THE REMOTE LCD ICON DESCRIPTION CHART :
Door Lock
Door Unlock
Your vehicles doors are locked.
Your vehicles doors are
unlocked and the system is
disarmed.
Armed Mode
Valet Mode
Your vehicle is in the
armed mode.
All the function shall be
temporarily on hold.
12
17
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
OPERATION
OPERATION
Trunk/
Hood Trigger
Doors
Trigger
Shock
Sensor Trigger
Ignition
Trigger
S. DOME LIGHT CONVENIENCE DELAY AND SUPERVISION
The alarm has a unique feature which will turn on your vehicles
Dome Light as follows:
1. Upon disarming, the dome Light will remain on for 30 seconds.
2. If the vehicle is intruded, the dome Light will flash for the same duration
as the siren.
Note: Turning “ON” the ignition switch or arming the alarm will turn
off the dome light.
T. IGNITION CONTROLLED DOOR LOCKING AND UNLOCKING
(See Alarm Feature II-3 Programming.)
Warn-away
Trigger
1. Turn the ignition switch “ON” and close all the vehicle’s doors. After 3
seconds, the system will automatically lock the central locking system.
2. Turn the ignition switch “OFF”. The system will automatically unlock the
central locking system.
CLEARING THE FLASHING ICON AND MELODY: While
triggering the alarm the LCD screen will alert the user with
a melody and flashing trigger icon. Pressing the F button
3 times within 3 seconds will clear the flashing icon and
stop the melody on the LCD screen transceiver.
U. TRUNK RELEASE (CHANNEL 3) OUTPUT.
CHANNEL 3 TIMER CONTROL OUTPUT
(See Alarm Feature III-3 Programming.)
Press and hold the button on the transmitter for (2) sec.
to open the trunk release or any other electric devices that has
been added to this output.
STOP THE MELODY ONLY: While triggering the alarm, the
LCD screen will alert the user through a melody and flashing trigger icon,
press any button on the LCD remote transceiver to stop the melody only.
NOISE ABATEMENT CIRCUIT: Your system has a “Noise Abatement
Circuit”. This feature prevents annoying repetitive trigger sequences due
to a faulty door pin switches or environmental conditions such as thunder,
jackhammers, airport noise, etc.
Channel 3 is user-programmable timer output. You may program the built=in
timer to send a ground signal for any time interval between 1 second and
2 minutes. For instance. this timer output may be used to turn on the
headlights, power windows or sunroof. NOTE: Factory default setting at 1
second pulse grounded for trunk release output.
Here’s how the “Noise Abatement Circuit” works: The alarm triggers five
times. Each time, the same sensor or switch is triggering the alarm, the
“Noise Abatement Circuit” will interpret this pattern of triggers or false
alarms. After the fifth trigger, the “Noise Abatement Circuit” ignores, or
bypasses, that sensor until another sensor or switch is triggered.
The “Noise Abatement Circuit” covers the doors (doors, hood and trunk)
differently: If the alarm is triggered by an open door for six full cycles, the
doors will be bypassed until the trigger ceases.
V. CHANNEL 4 TIMER CONTROL OUTPUT
Press the transmitters and buttons at the same time
to activate the “Channel 4 function”. Channel 4 is a user-
programmable timer output. You may program the built-in
timer to send a ground signal for any time duration from 1
second to 120 seconds. For instance, this timer output may
be used to turn on the headlights, power windows or sunroof.
(The factory default setting is a momentary output.)
O. ANTI CAR- JACKING
Warning: If you don't need the car jacking function in this
alarm system, be sure to set car jacking feature to the “OFF”
setting. This system default setting for car-jacking is “OFF”.
W. POWER ON MEMORY:
This security system is equipped with circuitry that will allow the unit to
remember its alarm state if the vehicle’s battery power is disconnected.
16
13
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
OPERATION
OPERATION
P. SYSTEM’S TRIGGER CHECK
ACTIVE ANTI CAR-JACKING:
(For two-way transceiver operation only)
Press the transceiver F button first, within 3 seconds press
1. Press and hold the transmitters and buttons at the same
time for 2 seconds while the vehicle’s ignition is “ON”. The
parking lights will turn “ON” for 1.5 seconds to indicate the
system is in the “Car-jacking Mode”.
2. Once the system is in “Car-jacking Mode” and you are forced
from the vehicle, the system will trigger when the door is opened
and closed while the ignition is in the “ON” position.
the (C) button. It will respond with one melody sound and
all trigger’s records will immediately be displayed on the LCD
screen.
Note: If there is no response you are out of range.
Q. SYSTEM’S STATUS CHECK
(For two-way transceiver operation only)
When you want to check the system’s present status through
the LCD screen, press the transceiver F button twice, within
PASSIVE ANTI CAR- JACKING:
1. Turn the ignition switch to the “ON” position for entering the “Car-
jacking Mode”
.
3 seconds press the (C)button. It will respond with one
melody sound, the LCD screen should be illuminated.
Note: If there is no response you are out of range.
2. Once the system is in “Car-jacking Mode” and you are forced from
the vehicle, the system will trigger when the door is opened and closed
while the ignition is in the “ON” position.
R. DRIVER PAGING (For two-way transceiver operation only)
It is useful in the event that someone wants to page the driver of the parked
vehicle.
TRIGGER THE ANTI CAR -JACKING MODE:
a).50 seconds after the system has been triggered. The siren will start
chirping for 15 seconds.
Indoor Driving Paging
b). During the 15 second period of chirping, you must push the valet
switch once to turn off the car-jacking feature. If not, it will enter the
Under the ignition switch “off” condition, press and hold the valet switch
for 2 seconds to page the driver, one chirp sound shall be emitted from the
vehicle and the paging melody sound continues on your Remote LCD
second timer Anti “Car-jacking Mode”
.
c). 65 seconds after the system has been triggered, the siren will start
alarming and the parking lights will continue flashing
transceiver and “ ” indication flashes on the LCD screen.
Outdoor Driving Paging
d). 90 seconds after the system has been triggered
If someone tries to page you by tapping the paging (knock) sensor (optional)
which is usually mounted on the bottom part of front window, the paging
1. The siren will continue alarming and the parking lights flashing.
2. The starter disable will activate to prevent the vehicle from starting.
3. This will remain active until the vehicle's battery power is diminished.
melody sound continues sounding on your Remote LCD transceiver and “
”
indication flashes on the LCD screen.
1. Press the transmitter F button first, within 3 seconds press ( ) button
OVERRIDE THE SYSTEM TO TURN OFF ANTI CAR- JACKING:
Turn the ignition switch from the “OFF” to “ON” position, and within 10
seconds push and release the valet/program switch, the siren will stop
and the system is disarmed.
Note: If you use password pin code to double protect the vehicle
security, you will need to use it to completely disarm the system.
to activate outdoor driver paging function, It responds with chirps of the
vehicle, a melody sound and " " indication flashes on the LCD screen
to confirm the function is on.
2. When tapping the paging (knock) sensor, one chirp sound shall be emitted
from the vehicle and the paging melody sound continues sounding on
your Remote LCD transceiver and “ ” indication flashes on the LCD
screen.
3. Turn on the ignition switch; OR press the button to arm the system;
OR press the button to disarm the system, this outdoor driver paging
function will exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
15
|