Sharper Image Refrigerator KP W400 User Manual

ONE YEAR LIMITED WARRANTY  
SI PRODUCTS sells its products with the intent that they are free of defects in manufacture and  
workmanship for the life of the original purchaser from the date of original purchase, except as noted  
below. SI PRODUCTS warrants that its products will be free of defects in material and workmanship  
under normal use and service. This warranty extends only to consumers and does not extend to  
Retailers.  
To obtain warranty service on your SI PRODUCTS product, mail the product and your dated sales  
receipt (as proof of purchase), postpaid, to the following address:  
SI PRODUCTS Consumer Relations  
Service Center Dept. 168  
3000 Pontiac Trail  
Adjustable Temperature  
Control Wine Chiller  
Commerce Township, MI 48390  
No COD's will be accepted.  
SI Products  
Service Center  
SI PRODUCTS does not authorize anyone, including, but not limited to, Retailers, the subsequent  
consumer purchaser of the product from a Retailer or remote purchasers, to obligate SI PRODUCTS  
in any way beyond the terms set forth herein. This warranty does not cover damage caused by  
misuse or abuse; accident; the attachment of any unauthorized accessory; alteration to the product;  
improper installation; unauthorized repairs or modifications; improper use of electrical/power supply;  
loss of power; dropped product; malfunction or damage of an operating part from failure to provide  
manufacturer’s recommended maintenance; transportation damage; theft; neglect; vandalism; or  
environmental conditions; loss of use during the period the product is at a repair facility or otherwise  
awaiting parts or repair; or any other conditions whatsoever that are beyond the control of SI  
PRODUCTS.  
This warranty is effective only if the product is purchased and operated in the country in which the  
product is purchased. A product that requires modifications or adoption to enable it to operate in any  
other country than the country for which it was designed, manufactured, approved and/or authorized,  
or repair of products damaged by these modifications is not covered under this warranty.  
THE WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE WARRANTY. THERE  
SHALL BE NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED WARRANTY OF  
MERCHANTABILITY OR FITNESS OR ANY OTHER OBLIGATION ON THE PART OF THE COMPANY WITH  
RESPECT TO PRODUCTS COVERED BY THIS WARRANTY. SI PRODUCTS SHALL HAVE NO LIABILITY FOR  
ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. IN NO EVENT SHALL THIS WARRANTY  
REQUIRE MORE THAN THE REPAIR OR REPLACEMENT OF ANY PART OR PARTS WHICH ARE FOUND TO  
BE DEFECTIVE WITHIN THE EFFECTIVE PERIOD OF THE WARRANTY.  
1.888.856.6781  
8:30a.m. – 7:00p.m. (EST)  
M – F  
Mail To: SI Products  
Consumer Relations  
Service Center Dept. 168  
3000 Pontiac Trail  
Commerce Township, MI  
48390  
e-mail:  
NO REFUNDS WILL BE GIVEN. IF REPLACEMENT PARTS FOR DEFECTIVE MATERIALS ARE NOT  
AVAILABLE, SI PRODUCTS RESERVES THE RIGHT TO MAKE PRODUCT SUBSTITUTIONS IN LIEU OF  
REPAIR OR REPLACEMENT.  
This warranty does not extend to the purchase of opened, used, repaired, repackaged and/or resealed  
products, including but not limited to sale of such products on Internet auction sites and/or sales of  
such products by surplus or bulk resellers. Any and all warranties or guarantees shall immediately  
cease and terminate as to any products or parts thereof which are repaired, replaced, altered, or  
modified, without the prior express and written consent of SI PRODUCTS.  
This warranty provides you with specific legal rights. You may have additional rights which may vary  
from state to state. Because of individual regulations, some of the above limitations and exclusions  
may not apply to you.  
For service or repair - do not return this unit to the retailer.  
Contact SI PRODUCTS Consumer Relations at 1-888-856-6781.  
©The Sharper Image. All rights reserved. THE SHARPER IMAGE name and logo are registered  
trademarks.  
Instruction Manual and  
Warranty Information  
KP-W400  
©2009 THE SHARPER IMAGE and its affiliated companies, all rights reserved. THE SHARPER IMAGE is a  
registered trademark of THE SHARPER IMAGE and its affiliated companies. All rights reserved.  
IB-KPW400  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fig. 1  
Adjustable Temperature Control Wine Chiller –  
Operation Instruction  
1) Preparation for First Time Use  
Unpack and locate the following items:  
– Wine bottle chiller unit  
Removable Bottle  
Top Cover  
– AC / DC power supply adaptor (Fig.1)  
LCD Panel  
Display  
2) Setting ºF and ºC Temperature  
Plug the DC power jack of the AC/DC power adaptor to the DC socket of the  
wine chiller; then connect the AC plug of the power supply adaptor to a main  
outlet.  
Press both power button and SELECT button  
simultaneously and hold for two seconds; the LCD will  
display the default in Fahrenheit ‘F ‘ (flashing) and  
‘ C’ (solid). Use the left symbol and right symbol  
buttons to change between the ‘ F’ and ‘ C‘ (Fig. 2).  
Press SELECT button to accept the flashing option  
Function Buttons  
Power Button  
SE  
LE  
CT  
AC Adaptor  
and set for ‘F’ or’ C’. The wine chiller will restart  
automatically.  
Fig. 2  
3) Using the Wine Chiller  
Plug the DC power jack of the AC/DC power adaptor to the DC socket of  
the wine chiller; then connect the AC plug of the power supply adaptor into a  
main outlet (Fig1).  
LCD layout  
Wine Preset  
Temperature  
Chilling  
Place a bottle of wine into the wine chiller and cover with the top cover (Fig.3).  
Current Wine  
Temperature  
Remaining  
Chilling Time  
Menu Text Area  
Fig. 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
4
3.1) Selecting Last Temperature Setting  
Press power button once to switch the chiller on. When power is on, the  
LCD displays ‘ WELCOME’ in blue back light for 3 seconds (Fig. 4).  
To repeat the same chilling temperature as the previous use, simply select ‘LAST’  
when it is flashing and press SELECT button and the chiller will recall the previous  
setting and start chilling the wine immediately.  
3.2) Selecting by Type  
To select by the wine type press arrows until ‘TYPE’ option is flashing  
on the screen and press SELECT. Screen will display ‘RED- WHT- CHAMP’  
(Fig.5). ‘RED’ will start flashing first. Press right symbol button or left  
symbol button to move between options. Press SELECT to accept the  
option you want when it is flashing. When the flashing selection is accepted  
the ice icon will flash and unit will start to chill bottle. (refer to Fig.6 showing  
Champagne as example)  
Fig. 4  
Next, the screen displays ‘LAST – TYPE – LIB’ and ‘LAST’ will now start  
flashing (Fig.5). The screen menu gives you three options for finding and  
selecting your wine and proper preset temperature.  
1) The ‘LAST‘ selection recalls the last wine setting previously used.  
2) TYPE’ allows you to select by grape type; red, white or champagne.  
3) ‘LIB’ selection is the wine library for selecting wine by country first and the  
grape type.  
Note: To make a choice select an option at any time in the menu, push ‘SELECT’  
button when that option is flashing on the screen.  
Fig. 6  
Fig. 7  
NOTE: Each type of wine has a general preset temperature based on wine type,  
45ºF / 7ºC for Champagne, 48ºF / 9ºC for white wine and 64ºF / 18ºC for red  
wine.  
3.3) Selecting Wine by Country  
Use arrows to scroll between options  
on opening screen (Fig.5) until ‘LIBRARY’ is  
flashing. Press ‘SELECT’ button. The screen  
will display ‘COUNTRY-TYPE’ (Fig.8) The  
‘COUNTRY’ icon will flash. Press right  
symbol button once and the ‘TYPE’ will start  
flashing. Press SELECT button to accept the  
flashing option you want.  
Fig. 5  
Fig. 8  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Press the or left / right symbol button once to select the next or previous  
wine in the library.  
To select wine by ‘COUNTRY’, press SELECT when the option is flashing and  
the screen will display countries in alphabetical order.  
Press or left/right symbol button to scroll through the ‘COUNTRY’ menu  
list. Press SELECT button to accept the appropriate country name as it  
appears.  
Press and hold the or left/right symbol button to move forward or  
backward through selections. At the end of the list, there is an “EXIT” option  
so that you can select it to return to the wine library menu or press the arrow  
button to return to the top of the wine list of the same country.  
At the end of every list, there is an “EXIT” option so that you can select it to  
return to the wine library menu or press the arrow button to return to the top of  
the wine list of the same country.  
COUNTRY LIST  
ARGENTINA  
AUSTRALIA  
CHILE  
4) When the correct wine is found in the menu, press SELECT to accept that  
selection. The wine name and pre-set temperature will stop flashing. Then, the  
wine chiller will begin to operate.  
FRANCE  
GERMANY  
ITALY  
NEW ZEALAND  
SOUTH AFRICA  
SPAIN  
NOTE: User can amend the preset temperature in mid-process before the chiller  
begins to operate with the or left and right symbol button. While the wine  
name and preset temperature are still flashing, press the right arrow button  
once, to increase the preset temperature by one degree, and press the left  
symbol button once to reduce the preset temperature by one degree. Then press  
‘SELECT’.  
USA  
Once the country is selected, the screen display will show red or white for  
selection. Once red or white has been selected the wine names will be displayed  
on the screen. Wines and preset temperatures are stored in the wine chiller  
memory for each country.  
5) Start COOLING/WARMING  
The cooling fan runs at its highest speed with ice icon flashing. The wine chiller will  
show the wine temperature after 4 minutes. The estimate remaining chilling time is  
represented by the status bar underneath the current temperature (Fig.10).  
For example: Select ‘ITALY’; then ‘RED’; then “AMARONE’ and its preset  
temperature will display on the LCD by flashing (Fig.9).  
Fig. 10  
Fig. 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Four bars, “60+ MIN”, “30 MIN” and “0 MIN” icons are on if the estimate  
remaining chilling time is 60 minutes.  
MAINTENANCE  
To Store  
Three bars, “30 MIN” and “0 MIN” icons are on if the estimate remaining  
chilling time is less than one hour and more than 45 minutes.  
Two bars, “30 MIN” and “0 MIN” icons are on if the estimate remaining chilling  
time is less than 30 minutes and more than 15 minutes.  
Single bar and “0 MIN” icons are on if the estimate remaining chilling time is  
less than 15 minutes.  
You may leave the unit on display or you can store it in its box in a cool, dry place.  
To Clean  
Use only a soft dry cloth to clean the enclosure of the unit. NEVER use liquids or  
abrasive cleaner to clean.  
6) Ready to serve  
When the actual temperature reaches the pre-set temperature, "READY" will  
display on the lower LCD screen (Fig.11 and the ice icon will stop flashing. The  
wine chiller will then sound 3 beeps.  
Fig. 11  
The temperature will be maintained at pre-set temperature automatically. The  
cooling fan will switch to a lower speed automatically to minimize the fan noise.  
Press SELECT button once at any time after the unit is powered on and the  
wine chiller will return to the wine library menu.  
To turn chiller off, press power button and hold for 1 second. Chiller will  
beep once and turn off automatically.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Barcode Reader XE A507 User Manual
Sharp Calculator EL W506 User Manual
Shure Microphone MX300 Series User Manual
Silvercrest Kitchen Utensil SEAS 60 A1 User Manual
Sony Microcassette Recorder SY ICD MX20DR9 User Manual
Sony Projector VPL CW125 User Manual
Sony Speaker System SRS T1 User Manual
Sterling Power Products Battery Charger DAI 1500C 12xx User Manual
Symphonic DVD Player WF104 User Manual
Tanaka Plumbing Product QCP 121 User Manual