OPERATION MANUAL
MODEL
XG-P25X
LCD PROJECTOR
XG-P25X/CD/H(E)
1
02.3.19, 7:18 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
The supplied CD-ROM contains operation instructions in English, German, French, Swedish, Spanish, Italian,
Dutch, Portuguese, Chinese (Traditional Chinese and Simplified Chinese), Korean and Arabic. Carefully read
through the operation instructions before operating the LCD projector.
Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Schwedisch,
Spanisch, Italienisch, Niederländisch, Portugiesisch, Chinesisch (Tradisionelles Chinesisch und einfaches
Chinesisch), Koreanisch und Arabisch. Bitte lesen Sie die Bedienungsanleitung vor der Verwendung des LCD-
Projektors sorgfältig durch.
Le CD-ROM fourni contient les instructions de fonctionnement en anglais, allemand, français, suédois,
espagnol, italien, néerlandais, portugais, chinois (chinois traditionnel et chinois simplifié), coréen et arabe.
Veuillez lire attentivement ces instructions avant de faire fonctionner le projecteur LCD.
Den medföljande CD-ROM-skivan innehåller bruksanvisningar på engelska, tyska, franska, svenska, spanska,
italienska, holländska, portugisiska, kinesiska (traditionell kinesiska och förenklad kinesiska), koreanska och
arabiska. Läs noga igenom bruksanvisningen innan projektorn tas i bruk.
El CD-ROM suministrado contiene instrucciones de operación en inglés, alemán, francés, sueco, español,
italiano, holandés, portugués, chino (chino tradicional y chino simplificado), coreano y árabe. Lea
cuidadosamente las instrucciones de operación antes de utilizar el proyector LCD.
Il CD-ROM in dotazione contiene istruzioni per l’uso in inglese, tedesco, francese, svedese, spagnolo, italiano,
olandese, portoghese, cinese (cinese tradizionale e cinese semplificato), coreano e arabo. Leggere
attentamente le istruzioni per l’uso prima di usare il proiettore LCD.
De meegeleverde CD-ROM bevat handleidingen in het Engels, Duits, Frans, Zweeds, Spaans, Italiaans,
Nederlands, Portugees, Chinees (Traditioneel Chinees en Vereenvoudigd Chinees), Koreaans en Arabisch. Lees
de handleiding zorgvuldig door voor u de LCD projector in gebruik neemt.
O CD-ROM fornecido contém instruções de operação em lnglês, Alemão, Francês, Sueco, Espanhol, Italiano,
Holandês, Português, Chinês (Chinês Tradicional e Chinês Simplificado), Coreano e Árabe. Leia
cuidadosamente todas as instruções de operação antes de operar o projetor LCD.
XG-P25X/CD/SUP
1
02.3.19, 7:20 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using the LCD projector, please read this operation manual carefully.
Introduction
ENGLISH
There are two important reasons for prompt warranty registration of your new SHARP LCD Projector,
using the REGISTRATION CARD packed with the projector.
1. WARRANTY
This is to assure that you immediately receive the full benefit of the parts, service and labor
warranty applicable to your purchase.
2. CONSUMER PRODUCT SAFETY ACT
To ensure that you will promptly receive any safety notification of inspection, modification, or
recall that SHARP may be required to give under the 1972 Consumer Product Safety Act, PLEASE
READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE.
U.S.A. ONLY
WARNING: High brightness light source. Do not stare into the beam of light, or view directly. Be especially
careful that children do not stare directly into the beam of light.
WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
See bottom of actual set.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk or electric shock to
persons.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT REMOVE SCREWS
EXCEPT SPECIFIED USER
SERVICE SCREWS.
The exclamation point within a triangle is
intended to alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the product.
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS EXCEPT LAMP UNIT.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the user’s authority to operate this equip-
ment.
U.S.A. ONLY
INFORMATION
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the operation manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case the user will be required to correct the interference at his own expense.
U.S.A. ONLY
The enclosed computer cable must be used with the device. The cable is provided to ensure that the device
complies with FCC Class A verification.
U.S.A. ONLY
WARNING:
This is a class A product. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
WARNING:
The cooling fan in this projector continues to run for about 90 seconds after the projector is turned off. During
normal operation, when turning the power off, always use the POWER OFF button on the projector or on the
remote control. Ensure the cooling fan has stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER
CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP FAILURE.
E-1
XG-P25X/CD (E)-a
1
02.3.19, 7:15 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT DISPOSAL
This projector utilizes tin-lead solder, and a pressurized lamp containing a small amount of mercury. Disposal of
these materials may be regulated due to environmental considerations. For disposal or recycling information,
please contact your local authorities or, if you are located in the United States of America, the Electronics Industries
Caution Concerning the Lamp Replacement
See “Replacing the Lamp” on pages
and
.
62
63
LAMP REPLACEMENT
CAUTION
BEFORE REMOVING THE SCREW, DISCONNECT
POWER CORD. HOT SURFACE INSIDE
ALLOW 1 HOUR TO COOL BEFORE REPLACING
THE LAMP. REPLACE WITH SAME SHARP LAMP
UNIT TYPE BQC-XGP25X//1 ONLY.
UV RADIATION : CAN CAUSE EYE DAMAGE.
TURN OFF LAMP BEFORE SERVICING.
MEDIUM PRESSURE LAMP : RISK OF EXPLOSION.
POTENTIAL HAZARD OF GLASS PARTICLES IF
LAMP HAS RUPTURED. HANDLE WITH CARE.
SEE OPERATION MANUAL.
E-2
XG-P25X/CD (E)-a
2
02.3.19, 7:15 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
CAUTION: Please read all of these instructions before you operate this product and save
these instructions for later use.
Electrical energy can perform many useful functions. This product has been engineered and manufactured to ensure your
personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to
defeat the safeguards incorporated into this LCD Projector, observe the following basic rules for its installation, use and
servicing.
1. Read Instructions
All the safety and operating instructions should be read
before the product is operated.
2. Retain Instructions
The safety and operating instructions should be retained
for future reference.
3. Heed Warnings
All warnings on the product and in the operating instructions
should be adhered to.
4. Follow Instructions
All operating and use instructions should be followed.
11. Power Sources
This product should be operated only from the type of power
source indicated on the marking label. If you are not sure
of the type of power supply to your home, consult your
product dealer or local power company. For products
intended to operate from battery power, or other sources,
refer to the operating instructions.
12. Grounding or Polarization
This product is provided with one of the following types of
plugs. If the plug should fail to fit into the power outlet,
please contact your electrician.
Do not defeat the safety purpose of the plug.
a. Two-wire type (mains) plug.
b. Three-wire grounding type (mains) plug with a
grounding terminal.
This plug will only fit into a grounding type power
outlet.
5. Cleaning
Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
6. Attachments
Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
13. Power-Cord Protection
Power-supply cords should be routed so that they are not
likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit
from the product.
7. Water and Moisture
Do not use this product near water–for example, near a
bathtub, wash bowl, kitchen sink, or laundry tub; in a wet
basement; or near a swimming pool; and the like.
8. Accessories
14. Lightning
Do not place this product on an unstable cart, stand, tripod,
bracket, or table. The product may fall, causing serious
injury to a child or adult, and serious damage to the product.
Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the
product. Any mounting of the product should follow the
manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
For added protection for this product during a lightning
storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect
the cable system. This will prevent damage to the product
due to lightning and power-line surges.
15. Overloading
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire
or electric shock.
9. Transportation
A product and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the product
and cart combination to overturn.
16. Object and Liquid Entry
Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the product.
10. Ventilation
17. Servicing
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the product and
to protect it from overheating, and these openings must
not be blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug, or
other similar surface. This product should not be placed in
a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s instruc-
tions have been adhered to.
Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service
personnel.
E-3
XG-P25X/CD (E)-a
3
02.3.19, 7:15 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
18. Damage Requiring Service
19. Replacement Parts
Unplug this product from the wall outlet and refer servicing
to qualified service personnel under the following
conditions:
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
a. If the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into
the product.
20. Safety Check
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following
the operating instructions. Adjust only those controls
that are covered by the operating instructions, as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualified technician to restore the product to normal
operation.
e. If the product has been dropped or damaged in any
way.
f. If the product exhibits a distinct change in
performance, this indicates a need for service.
Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
21. Wall or Ceiling Mounting
This product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
22. Heat
This product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
• Microsoft and Windows are registered trademarks of Microsoft Corporation, in the United States and/or other
countries.
• PC/AT is a registered trademark of International Business Machines Corporation in the United States.
• Adobe Acrobat is a trademark of Adobe Systems Incorporated.
• Macintosh is a registered trademark of Apple Computer, Inc. in the United States and/or other countries.
• All other company or product names are trademarks or registered trademarks of their respective companies.
• This software is based in part on the work of the Independent JPEG Group.
E-4
XG-P25X/CD (E)-a
4
02.3.19, 7:15 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
Caution Concerning the Lamp
Replacement
See “Replacing the Lamp” on pages
and
.
62
63
PRODUCT DISPOSAL
This projector utilizes tin-lead solder, and a pressurized
lamp containing a small amount of mercury. Disposal of
these materials may be regulated due to environmental
considerations. For disposal or recycling information,
please contact your local authorities or, if you are located
in the United States of America, the Electronics Industries
LAMP REPLACEMENT
CAUTION
BEFORE REMOVING THE SCREW, DISCONNECT
POWER CORD. HOT SURFACE INSIDE
ALLOW 1 HOUR TO COOL BEFORE REPLACING
THE LAMP. REPLACE WITH SAME SHARP LAMP
UNIT TYPE BQC-XGP25X//1 ONLY.
UV RADIATION : CAN CAUSE EYE DAMAGE.
TURN OFF LAMP BEFORE SERVICING.
MEDIUM PRESSURE LAMP : RISK OF EXPLOSION.
POTENTIAL HAZARD OF GLASS PARTICLES IF
LAMP HAS RUPTURED. HANDLE WITH CARE.
SEE OPERATION MANUAL.
Caution Concerning the Lamp Unit
Potential hazard of glass particles if lamp ruptures. In
case of lamp rupture, contact your nearest Sharp
Authorized LCD Projector Dealer or Service Center for
a replacement.
See “Replacing the Lamp” on pages
and
.
62
63
Cautions Concerning the Setup of
the Projector
For minimal servicing and to maintain high image quality,
SHARP recommends that this projector be installed in
an area free from humidity, dust and cigarette smoke.
When the projector is subjected to these environments,
the lens must be cleaned more often. As long as the
projector is properly maintained in this manner, use in
these environments will not reduce the overall operation
life. Please note that all internal cleaning must be
performed by a Sharp Authorized LCD Projector Dealer
or Service Center.
CAUTION
PRECAUCIÓN
PRÉCAUTION
BQC-XGP25X//1
Notes on Operation
• The exhaust vent, the lamp cage cover and adjacent
areas may be extremely hot during projector
operation. To prevent injury, do not touch these areas
until they have sufficiently cooled.
• Allow at least 12 inches (30 cm) of space between
the exhaust vent and the nearest wall or obstruction.
• If the cooling fan becomes obstructed, a protection
device will automatically turn off the projector lamp.
This does not indicate a malfunction. Remove the
projector power cord from the wall outlet and wait at
least 10 minutes. Then turn on the power by plugging
the power cord back in. This will return the projector
to the normal operating condition.
E-5
XG-P25X/CD (E)-a
5
02.3.19, 7:15 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
Temperature Monitor Function
If the projector starts to overheat due to setup problems
or a dirty air filter, “TEMP.” and “ ” will blink in the lower-
left corner of the picture. If the temperature continues
to rise, the lamp will turn off, the TEMPERATURE
WARNING indicator on the projector will blink, and after
a 90-second cooling-off period the power will shut off.
Refer to “Lamp/Maintenance Indicators” on page
for details.
,
61
• The cooling fan regulates the internal temperature, and its
performance is automatically controled. The sound of the
fan may change during projector operation due to changes
in the fan speed.
Lamp Monitor Function
When the projector is turned on after the lamp has been used
for 1,400 hours, “LAMP” and “ ” will blink in the lower-left
corner of the picture to advise you to replace the lamp. See
pages 62 and 63 for lamp replacement. If the lamp has
been used for 1,500 hours, the projector power will
automatically turn off and the projector will enter standby
mode. Refer to “Lamp/Maintenance Indicators” on page
for details.
,
61
Using the Carrying Handle
When transporting the projector, carry it by the carrying
handle on the side.
CAUTION
• Always put on the lens cap to prevent damage to the lens
when transporting the projector.
• Do not lift or carry the projector by the lens or the lens cap
as this may damage the lens.
Using the Kensington Lock
This projector has a Kensington Security Standard
connector for use with a Kensington MicroSaver Security
System. Refer to the information that came with the
system for instructions on how to use it to secure the
projector.
Kensington Security
Standard connector
E-6
XG-P25X/CD (E)-a
6
02.3.19, 7:15 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Outstanding Features
1. High-end LCD Projector with Ultra High Brightness
• AC 270 W Lamp
Use AC 270 W lamp for excellent color uniformity and ultra high brightness.
2. Computer Compatibility
• Compatible with resolutions including VGA-SVGA (expanded), XGA (true
resolution) and SXGA-UXGA (compressed) as well as DTV formats (480I, 480P,
580I, 580P, 720P, 1035I and 1080I).
3. XGA Image Quality
• OCS LCD panel enhances color uniformity.
• Various other circuits are also used to provide high quality video images.
4. Computer & Video Integrated Composer Technology
• New Progressive Mode
I/P conversion with new algorithm used to achieve beautiful image quality.
• Enhanced Up-scaling and Digital Image Enlargement
Enables sharper image quality without jaggies even for enlarged images.
• Superior 16:9 Image
4:3 images can be converted to 16:9 images using Smart Stretch (sides stretched,
center untouched), previously not achievable with LCD projectors.
• Intelligent Digital Keystone Correction
Smooths out jaggies on keystone images and compresses the image not only
horizontally but vertically keeping the 4:3 aspect ratio. Even if the 4:3 aspect ratio
changes due to lens shift, v-size adjustment allows you to keep this ratio.
• New Intelligent Compression
Efficiently compresses UXGA (1,600
ן 1,200) images to XGA (1,024 ן 768). • Enhanced three-two pull down
Converts cinema mode DVD images transformed with three-two pull down enhancement
to progressive mode images for easier viewing by Film Mode.
• Dynamic GAMMA Correction
Optimizing GAMMA correction frame by frame in real time.
5. 3D Digital Uniformity and Digital Convergence
• Three-Dimensional Digital Uniformity compensates uneven picture brightness
even for pictures at any brightness level from white to dark. And, with Digital
Convergence, a slight distortion of convergence can be adjusted on the service
menu screen without having to touch the LCD panel.
E-7
XG-P25X/CD (E)-a
7
02.3.19, 7:16 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Outstanding Features
6. Network Capability
• Self-Diagnosis/Projector Status
Self-diagnosis/Projector status function sends e-mail
messages to a specified computer about lamp usage
time and any malfunctions.
• Multiple & Group Projector Control
Up to 250 projectors can be controled over a network.
Projector RS-232C OUT can be used for daisy chain
connection.
• Simple Stacking and Videowall Display
Comes with software for easy stacking and videowall processing even for input from a
single source.
7. Two Optional Lenses for Maximum Flexibility
• Screw mount type: Fixed Wide Lens,Tele-Zoom Lens
8. Multiple Input and Output Terminals
• BNC Terminal for RGB/Component/Video Signal
• PC Digital Input (DVI)
• Output terminal with VAO (variable audio output) support
9. Easy Setup
• Lens Shift, Power Zoom & Focus, Digital Keystone Correction
• High Speed Auto Sync Technology
10. Useful Features
• Picture-in-Picture, Digital Enlargement, Freeze
• Customizable Startup Screen & Background Screen
11. Application Software
• “Sharp Advanced Presentation Software Professional Edition” (Network and
Remote Control)
LAN
LAN
LAN
E-8
XG-P25X/CD (E)-a
8
02.3.19, 7:16 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Important Information
Basic Operation
1
Introduction ..........................................
IMPORTANT SAFEGUARDS ................
Outstanding Features ..........................
Contents................................................
How to Access the PDF Operation
Manuals ............................................
Part Names............................................
Using the GUI (Graphical User
Interface) Menu Screen...................
Basic Operations....................................
Menu Bars ..............................................
Adjusting the Picture ..............................
Adjusting the Computer Images
3
38
38
39
41
7
9
11
12
43
46
(RGB menu only) ..............................
Adjusting the Sound ...............................
Displaying Dual Pictures
14
Using the Remote Control ...................
Accessories ..........................................
15
47
(RGB menu only) ..............................
Reducing Image Noise
47
48
(VIDEO menu only) ...........................
Turning On/Off the On-screen Display ...
Setting the Video Signal
Setup &
Connections
48
49
49
50
51
51
52
(VIDEO menu only) ...........................
Selecting a Background Image..............
Selecting a Startup Image......................
Selecting the Economy Mode ................
Confirming the Lamp Usage Time .........
Reversing/Inverting Projected Images ...
Setting the Stacking Mode .....................
Locking the Operation Buttons
on the Projector.................................
Deselecting Inputs .................................
Selecting the Transmission Speed
(RS-232C) .........................................
Controling Multiple Projectors
16
Connections..........................................
16
17
20
21
21
22
23
23
23
24
25
30
30
30
30
Power Supply .........................................
Projecting Computer Images .................
Watching Video Images .........................
Watching Component Video Images .....
For Better Sound ....................................
Power ON/OFF .......................................
Setting Up the Screen ..........................
Using the Adjustment Feet .....................
Using the Lens Shift ...............................
LENS Button ...........................................
Adjusting the Projection Distance ..........
Image Projection ..................................
Rear Projection .......................................
Projection Using a Mirror ........................
Ceiling-mount Projection ........................
52
53
53
54
55
with ID Numbers ...............................
Protecting Important Settings
with a Password ................................
Selecting the On-screen Display
56
56
Language..........................................
Displaying the Adjustment Settings .......
Operation Buttons
31
31
31
31
32
32
Using the Operation Buttons ..............
Selecting the Input Signal Source ..........
Adjusting the Volume..............................
Muting the Sound ...................................
Superimposing a Black Screen..............
Displaying a Still Image..........................
Magnifying a Specific Portion
33
34
of an Image.......................................
Display and Setting the Break Timer......
Computer Image Adjustments
34
35
37
using AUTO SYNC............................
Adjusting the Picture Aspect Ratio.........
Gamma Correction Function ..................
E-9
XG-P25X/CD (E)-a
9
02.3.19, 7:16 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Multiple Function
Using Extended Functionality
57
Features ...........................................
Maintenance &
Troubleshooting
61
62
64
65
66
Lamp/Maintenance Indicators .............
Replacing the Lamp .............................
Replacing the Air Filter ........................
Troubleshooting ...................................
For SHARP Assistance ........................
Appendix
67
68
Connecting Pin Assignments .............
(RS-232C) Specifications and
Command Settings..........................
Wired Remote Control Terminal
71
72
73
74
75
76
Specifications ..................................
Compatibility Chart ..............................
Dimensions ...........................................
Specifications .......................................
Glossary ................................................
Index ......................................................
E-10
XG-P25X/CD (E)-a
10
02.3.19, 7:16 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Access the PDF Operation Manuals
PDF operation manuals in several languages are included in the Projector Manual and Technical Reference CD-
ROM. To utilize these manuals, you need to install Adobe Acrobat Reader on your PC (Windows or Macintosh). If
it from the CD-ROM.
To Install Acrobat Reader from the CD-ROM
For Windows:
For Macintosh:
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click on the “My Computer” icon.
3 Double click on the “CD-ROM” drive.
4 Double click on the “acrobat” folder.
5 Double click on the desired installation program
and follow the instructions on the screen.
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click on the “CD-ROM” icon.
3 Double click on the “acrobat” folder.
4 Double click on the desired installation program
and follow the instructions on the screen.
For other operating systems:
Please download Acrobat Reader from the Internet (http://www.adobe.com).
For other languages:
If you prefer using Acrobat Reader for languages other than those included in the CD-ROM, please download the
appropriate version from the Internet.
Accessing the PDF Manuals
For Windows:
For Macintosh:
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click on the “My Computer” icon.
3 Double click on the “CD-ROM” drive.
4 Double click on the “manuals” folder.
5 Double click on the language (name of the folder)
that you want to view.
1 Insert the CD-ROM in the CD-ROM drive.
2 Double click on the “CD-ROM” icon.
3 Double click on the “manuals” folder.
4 Double click on the language (name of the folder)
that you want to view.
5 Double click on the “p25x” pdf file to access the
projector manual.
6 Double click on the pdf file.
6 Double click on the “p25x” pdf file to access the
projector manual.
7 Double click on the pdf file.
• If the desired pdf file cannot be opened by double clicking the mouse, start Acrobat Reader first, then specify the desired file
using the “File”, “Open” menu.
• See the “readme.txt” file on the CD-ROM for important information on the CD-ROM not included in this operation manual.
E-11
XG-P25X/CD (E)-a
11
02.3.19, 7:16 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names
Numbers next to the part names refer to the main pages in this manual where the topic is explained.
Projector
Front View
TEMPERATURE WARNING
indicator
LAMP REPLACEMENT indicator
61
61
POWER indicator
61
22
POWER buttons (ON/OFF)
31 VOLUME buttons (
מ /ם ) MUTE button 31
38
34
35
37
38
38
MENU button
LENS button
24
AUTO SYNC button
INPUT 1, 2, 3, 4, 5 buttons
31
32
32
38
RESIZE button
FREEZE button
GAMMA button
UNDO button
BLACK SCREEN button
ENTER button
Lens shift dial
ADJUSTMENT buttons
(∂/ƒ/ß/©)
Cooling fan (Exhaust vent)
5
23
Air filter/Cooling fan
(Intake vent)
Speakers
46
23
64
Foot releases
Rear View
64 Cooling fan (Intake vent)
Kensington Security
Standard connector
6
Carrying handle
6
INPUT 3 port (DVI) 19
WIRED REMOTE control
input terminal
Computer AUDIO INPUT 2/3 terminal
19
14
21
50
(ø3.5 mm stereo minijack)
(ø3.5 mm stereo minijack)
AUDIO OUTPUT terminal
(ø3.5 mm stereo minijack)
INPUT 1 port (15-pin Mini D-sub)
17
Computer AUDIO INPUT 1 terminal
OUTPUT port (15-pin Mini
D-sub) for INPUT 1, 2
17
18
(ø3.5 mm stereo minijack)
INPUT 2 terminals (BNC)
RS-232C INPUT port/ 19
RS-232C OUTPUT port
AC socket
59
16
20
S-VIDEO INPUT 5 terminal
20
20
(4-pin Mini DIN)
AUDIO INPUT 4/5
terminals (RCA)
VIDEO INPUT 4 terminal (RCA)
E-12
XG-P25X/CD (E)-a
12
02.3.19, 7:16 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names
Numbers next to the part names refer to the main pages in this manual where the topic is explained.
Remote Control
Front View
POWER buttons (ON/OFF)
22
LENS button
MENU button
24
38
38
38
ENTER button
Adjustment (∂/ƒ/ß/©)
buttons
UNDO button
ENLARGE buttons
AUTO SYNC button
GAMMA button
38
33
34
37
31
31
31
31
FREEZE button
32
BLACK SCREEN button
INPUT 3 button
32
31
35
31
31
34
INPUT 1 button
INPUT 2 button
INPUT 4 button
RESIZE button
INPUT 5 button
MUTE button
VOLUME (
מ /ם ) buttons
BREAK TIMER button
Bottom View
Wired RC jack
14
E-13
XG-P25X/CD (E)-a
13
02.3.19, 7:16 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Inserting the batteries
Press the tab and lift open the
Insert two R-6 batteries (“AA”
size, UM/SUM-3, HP-7 or
similar), making sure the
polarities match the
and marks inside the battery
compartment.
Insert the tabs on the end of
1battery cover in the direction of
2
3 the battery cover into their
the arrow.
slots and press the cover into
position.
Battery cover
Battery
cover
Battery
compartment
Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below.
CAUTION
• Insert the batteries making sure the polarities correctly match the
ם and מ marks inside the battery compartment. • Batteries of different types have different properties, therefore do not mix batteries of different types.
• Do not mix new and old batteries.
This may shorten the life of new batteries of may cause old batteries to leak.
• Remove the batteries from the remote control once they have run out, as leaving them can cause them to leak.
Battery fluid from leaked batteries is harmful to your skin, therefore be sure to first wipe them and then remove them using a cloth.
• The batteries included with this projector may be used up over a short period, depending on how they are kept. Be sure to replace them as
soon as possible with new batteries.
• Remove the batteries from the remote control if you will not be using the remote control for a long time.
Available Range of the Remote Control
The remote control can be used to control the projector within the ranges
shown in the illustration.
• The signal from the remote control can be reflected off a screen for easy operation.
However, the effective distance of the signal may differ due to the screen material.
23Ј (7 m)
30˚
When using the remote control:
30˚
45˚
• Be sure not to drop, expose to moisture or high temperature.
• The remote control may malfunction under a fluorescent lamp. Under that
circumstance, move the projector away from the fluorescent lamp.
45˚
30˚
Using as a Wired Remote Control
When the remote control cannot be used due to the range or positioning of the projector (rear projection, etc.),
connect a ø3.5 mm minijack cable (commercially available) from the wired RC jack on the bottom of the remote
control to the WIRED REMOTE control input terminal on the rear of the projector.
ø3.5 mm minijack cable
(commercially available)
E-14
XG-P25X/CD (E)-a
14
02.3.19, 7:17 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Supplied Accessories
Remote control
RRMCGA048WJSA
Two R-6 batteries
(“AA” size, UM/SUM-3,
HP-7 or similar)
Power cord
(1)
(2)
(3)
(4)
For U.S., Canada etc.
(11Ј 10Љ, 3.6m)
QACCDA010WJPZ
For Europe, except U.K.
(6Ј, 1.8m)
QACCV4002CEZZ
For U.K., Hong Kong
and Singapore
(6Ј, 1.8m)
For Australia, New
Zealand and Oceania
(6Ј, 1.8m)
QACCB5024CENA
QACCL3022CEZZ
• Depending on the region, projectors only ship with one power cord (See above). Use the power cord that corresponds to the wall outlet
in your country.
Computer audio cable
(ø3.5 mm stereo minijack cable)
(9Ј 10Љ, 3m)
RGB cable
Three BNC-RCA adaptors
QPLGJ0107GEZZ
(9Ј 10Љ, 3m)
QCNWGA013WJPZ
QCNWGA012WJPZ
Extra air filter
PFILD0080CEZZ
Lens cap
(attached)
PCAPH1056CESA
Projector Manual and Technical
Reference CD-ROM
LCD projector operation manual
TINS-A133WJZZ
Sharp Advanced Presentation
Software installation guide
TINS-A139WJZZ
UDSKAA004WJZZ
Quick reference guides
Sharp Advanced Presentation
Software CD-ROM
UDSKAA005WJZZ
ID number seal
TLABZ0781CEZZ
Optional Accessories
DVI cable (9Ј 10Љ (3.0 m))
AN-C3DV
3 RCA to 15-pin D-sub cable (9Ј 10Љ (3.0 m))
AN-C3CP
Computer RGB cable (32Ј 10Љ (10.0 m))
AN-C10BM
(for IBM-PC, NEC PC-9821 and PC-98NX series)
AN-C10MC
(for Macintosh series)
AN-C10PC
(for NEC PC-98 series (Except NEC PC-9821 and PC-98NX series)
5 BNC to 15-pin D-sub cable (9Ј 10Љ (3.0 m)) AN-C3BN
RS-232C serial control cable (32Ј 10Љ (10.0 m)) AN-C10RS
DVI to 15-pin D-sub adaptor (7.9Љ (20 cm))
AN-A1DV
• All cables may not be available in all regions. Please check with your nearest Sharp Authorized LCD Projector Dealer or Service Center.
E-15
XG-P25X/CD (E)-a
15
02.3.19, 7:17 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Power Supply
Connecting the Power Cord
Plug the supplied power cord into the AC socket on the rear of the projector.
Power cord
Make the necessary connections before proceeding. Connect the power cord to a wall outlet.
The POWER indicator lights up red and the projector enters standby mode.
POWER indicator
• If the bottom filter cover is not securely installed, the POWER indicator flashes.
E-16
XG-P25X/CD (E)-b
16
02.3.19, 7:03 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Projecting Computer Images
Connecting the Projector to a Computer
You can connect your projector to a computer for projection of full color computer images.
Connecting to a computer using the standard 15-pin Input
Computer audio cable
4
3
1
RGB cable
2
Computer
1
2
Connect one end of the supplied RGB cable to the INPUT 1 port on the projector.
Connect the other end to the monitor output port on the computer. Secure the connectors by tightening the
thumb screws.
3
4
To use the built-in audio system, connect one end of the supplied computer audio cable to the AUDIO INPUT 1
terminal on the projector.
Connect the other end to the audio output terminal on the computer.
CAUTION
• Before connecting, be sure to turn both the projector and the computer off. After making all connections, turn the projector on first. The
computer should always be turned on last.
• Please read the computer’s operation manual carefully before making connections.
• Refer to page
“Compatibility Chart” for a list of computer signals compatible with the projector. Use with computer signals other than
72
those listed may cause some of the functions not to work.
• A ø3.5 mm stereo minijack to stereo RCA audio cable adaptor may be necessary.
When connecting this projector to a computer, select “RGB” for “Signal Type” on the GUI menu. (See page
.)
41
• A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Sharp Authorized LCD Projector
Dealer or Service Center.
• AUDIO INPUT 1 can be used to input audio corresponding to the INPUT 1.
E-17
XG-P25X/CD (E)-b
17
02.3.19, 7:03 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Projecting Computer Images
• This projector uses a 5 BNC computer input to prevent deterioration of image quality.
• Connect the R (PR), G/G sync (Y), B (PB), HD/C sync and VD cables (sold separately) to the correct input
terminals on the projector and an RGB switcher (sold separately) connected to the computer, or connect a 5
BNC cable (sold separately) directly from the input terminals on the projector to the computer.
Connecting to an external RGB switcher or other compatible computers using the BNC Input
(Typically used in larger installations )
Computer audio cable
3
4 To audio output
terminal
To R (PR), G/G sync (Y), B (PB),
HD/C sync and VD output terminals
Computer
1
RGB cable
5 BNC cable
(sold separately)
RGB switcher
(sold separately)
2 To RGB switcher
1
2
Connect each BNC connector of a 5 BNC cable to the corresponding INPUT 2 terminals on the projector.
Connect the other end of the 5 BNC cable to the corresponding BNC terminals on the external RGB switcher.
Connect the RGB switcher to the computer using a RGB cable.
3
4
To use the built-in audio system, connect one end of the supplied computer audio cable to the AUDIO INPUT 2/
3 terminal on the projector.
Connect the other end to the audio output terminal on the computer or external audio system.
• A ø3.5 mm stereo minijack to stereo RCA audio cable adaptor may be necessary.
When connecting the projector to a compatible computer other than a PC (VGA/SVGA/XGA/SXGA/UXGA) or Macintosh (i.e.
Workstation), a separate cable may be needed. Please contact your dealer for more information.
When connecting this projector to a computer, select “RGB” for “Signal Type” on the GUI menu. (See page
.)
41
• Connecting computers other than the recommended types may result in damage to the projector, the computer, or both.
• AUDIO INPUT 2/3 can be used to input audio corresponding to the INPUT 2/3.
“Plug and Play” function (when connecting to a 15-pin terminal)
• This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible
computer will communicate their setting requirements, allowing for quick and easy setup.
• Before using the “Plug and Play” function, be sure to turn on the projector first and the connected computer last.
• The DDC “Plug and Play” function of this projector operates only when used in conjunction with a VESA DDC compatible computer.
E-18
XG-P25X/CD (E)-b
18
02.3.19, 7:04 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Projecting Computer Images
Connecting to a computer using the RS-232C Port
When the RS-232C port on the projector is connected to a computer with an RS-232C serial control cable (cross
type, sold separately), the computer can be used to control the projector and check the status of the projector.
See pages
,
and
for details.
68
69
70
Connect an RS-232C serial control cable (cross type, sold separately) to the serial port on the computer.
See page
for recommended connection of an RS-232C serial control cable.
67
RGB cable
Computer audio cable
RS-232C serial control cable
AN-C10RS
Computer
(sold separately)
CAUTION
• Do not connect or disconnect an RS-232C cable to or from the computer while it is on. This may damage your computer.
• The wireless mouse or RS-232C function may not operate if your computer port is not correctly set up. Please refer to the operation manual
of the computer for details on setting up/installing the correct mouse driver.
• A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Sharp Authorized LCD Projector
Dealer or Service Center.
Connecting to a computer using the direct digital input port
3
Computer audio cable
4 To audio output terminal
DVI cable (sold separately)
AN-C3DV
1
Computer
2 To digital output terminal
1
2
3
Connect one end of the DVI cable to the INPUT 3 port on the projector.
Connect the other end to the corresponding terminal on a computer.
To use the built-in audio system, connect one end of the supplied computer audio cable to the AUDIO INPUT 2/
3 terminal on the projector.
4
Connect the other end to the audio output terminal on the computer.
• This DVI port is DVI version 1.0 compatible. Therefore when the signal is input from copy guard system compatible (DVI version 2.0)
equipment, no signal will be received.
• The analog RGB signal inputs on the DVI port are only compatible with separate sync.
E-19
XG-P25X/CD (E)-b
19
02.3.19, 7:04 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching Video Images
Connecting to a VCR, laser disc player and other audiovisual
equipment using the standard video Input
S-video cable (sold separately)
Example
To S-video output terminal
Video cable (sold separately)
VCR
or
1
To video output terminal
Laser disc player
2
Audio cable (sold separately)
To audio output terminals
1
2
Connect the yellow RCA connectors to the corresponding yellow VIDEO INPUT 4 terminal on the projector and
the Video output terminal on the video source.
To use the built-in audio system, connect the red and white RCA connectors to the corresponding red and white
AUDIO INPUT 4/5 terminals on the projector and the Audio output terminals on the video source.
The S-VIDEO INPUT 5 terminal uses a video signal system in which the picture is separated into a color and a luminance signal
to realize a higher-quality image.
• For higher quality video, you may use the S-VIDEO INPUT 5 terminal on the projector. S-video cable is sold separately.
• If your video equipment does not have an S-video output terminal, use a composite video cable.
CAUTION
• Always turn off the projector before connecting to video equipment, in order to protect both the projector and the equipment
being connected.
E-20
XG-P25X/CD (E)-b
20
02.3.19, 7:04 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching Component Video Images
Connecting to a DVD video player, DTV* decoder and other
component video equipment using the 5 BNC Input
4 To audio output terminals
Example
3
Audio cable
(ø3.5 mm stereo minijack to RCA
cable, commercially available)
DTV decoder
or
1
Component cable (sold separately)
DVD video player
2 To analog component output terminals
CAUTION
• Always turn off the projector before connecting to video
equipment, in order to protect both the projector and the
equipment being connected.
Three BNC-RCA adaptors
1
Connect each BNC connector of a component cable to the corresponding BNC INPUT 2 terminals on the
projector.
2
3
Connect the other end of the cable to the corresponding terminals on a DVD video player or DTV decoder.
To use the built-in audio system, connect one end of an audio cable (sold separately) to the AUDIO INPUT 2/3
terminal on the projector.
4
Connect the other end to the audio output terminal on the DVD video player or DTV decoder.
• BNC-RCA adaptors are included for use with RCA type cables and sources.
• A ø3.5 mm stereo minijack to stereo RCA audio cable adaptor may be necessary.
When connecting this projector to a DVD video player or DTV decoder, select “Component” for “Signal Type” on the GUI
menu. (See page
.)
41
*DTV is the umbrella term used to describe the new digital television system in the United States.
For Better Sound
Connecting to an amplifier and other audio components
Audio cable (commercially available)
To audio input terminals
Amplifier
CAUTION
• Always turn off the projector before connecting to audio
components, in order to protect both the projector and the
components being connected.
• By using external audio components, the volume can be amplified for better sound.
• The AUDIO OUTPUT terminal allow you to output audio to audio components from the selected AUDIO INPUT 1 to 5 terminals connected to
audiovisual equipment.
• For details on Variable Audio Output (VAO) and Fixed Audio Output (FAO), see page
• A ø3.5 mm stereo minijack to stereo RCA audio cable adaptor may be necessary.
.
46
E-21
XG-P25X/CD (E)-b
21
02.3.19, 7:04 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Power ON/OFF
Projector
Remote control
Press POWER ON.
• The blinking green LAMP REPLACEMENT indicator
shows that the lamp is warming up. Wait until the
indicator stops blinking before operating the projector.
• If the power is turned off and then immediately turned
on again, it may take a short while before the lamp
turns on.
POWER
• After the projector is unpacked and turned on for the first
time, a slight odor may be emitted from the exhaust vent.
This odor will soon disappear with use.
When the power is on, the LAMP REPLACEMENT
indicator lights, indicating the status of the lamp.
Green: Lamp is ready.
Green blinking: Warming up.
Red: Change the lamp.
LAMP REPLACEMENT
indicator
On-screen Display
Press POWER OFF.
Press POWER OFF again while the message is
displayed to turn off the power.
• If you accidentally pressed POWER OFF and do not want
to turn off the power, wait until the power off screen
disappears.
• When the power is turned off, the POWER indicator will light
up red and the cooling fan will run for about 90 seconds.
The projector will then enter standby mode.
• Wait until the cooling fan stops before disconnecting the
power cord.
• The power can be turned on again by pressing POWER
ON. When the power is turned on, the POWER indicator
and the LAMP REPLACEMENT indicator light green.
• The POWER indicator flashes if the bottom filter cover is
not securely installed.
WARNING:
The cooling fan in this projector continues to run for
about 90 seconds after the projector is turned off.
During normal operation, when turning the power off
always use the POWER OFF button on the projector or
on the remote control. Ensure the cooling fan has
stopped before disconnecting the power cord.
DURING NORMAL OPERATION, NEVER TURN THE
PROJECTOR OFF BY DISCONNECTING THE POWER
CORD. FAILURE TO OBSERVE THIS WILL RESULT IN
PREMATURE LAMP FAILURE.
E-22
XG-P25X/CD (E)-b
22
02.3.19, 7:04 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Screen
Using the Adjustment Feet
1
3
2
UP
DOWN
Press foot releases.
Adjust height of projector
and remove hands from
foot releases.
Rotate feet to make minor changes.
• The projector is adjustable up to approximately 10° from the standard position.
• When the height of the projector is adjusted, the image may become distorted (keystoned), depending on the relative
positions of the projector and the screen.
CAUTION
• Do not press the foot releases when the adjustment feet are extended without firmly holding the projector.
• Do not hold the lens when lifting or lowering the projector.
• When lowering the projector, be careful not to get your fingers caught in the area between the adjustment feet and the
projector.
Using the Lens Shift
The picture can be adjusted within the shift range of the lens by rotating the dial on the top of the projector.
Projector
Projected Image
UP
Lens shift dial
UP
DOWN
DOWN
• The lens shift dial is set to the upper most position at the factory. Remember to adjust lower by turning the dial when operating the projector.
• The lens shift dial has two points to help orient the position. The center of the lens and bottom of the screen are the same height (10:0) and
the center of the lens and center of the screen are the same height (5:5). When either position is reached by turning the dial, you will notice
a slight latching feeling.
• Do not forcefully turn the lens shift dial beyond the 10:0 and 5:5 orientating positions; doing so may result in damaging the equipment.
• When the AN-P9MX of optional lens is attached, lens shift cannot be used.
E-23
XG-P25X/CD (E)-b
23
02.3.19, 7:04 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
LENS Button
Projector
Remote control
Digital Image Adjustments
This function can be used to adjust the focus, zoom,
keystone, v-size and digital shift settings.
LENS
1
2
3
4
Press LENS to select mode. Each time LENS is
pressed, the screen changes as shown on the left.
∂/ƒ/ß/©
Press ENTER to display test
pattern.
UNDO
ENTER
Press ∂/ƒ/ß/© to make
adjustments.
a. Press LENS until normal screen appears.
b. To reset the “KEYSTONE”, “V-SIZE” and
“DIGITAL SHIFT” setting, press UNDO.
On-screen Display
(Example: 4:3
NORMAL image)
On-screen Display
(Example: 16:9
WIDE image)
• Do not touch the lens when adjusting the focus or zoom.
Keystone setting
Trapezoidal distortion is caused when the projector
image is positioned away from the center axis of the
screen. This function allows you to correct the keystone
effect for excellent picture quality.
• Straight lines and the edges of the displayed image may appear
jagged, when adjusting the KEYSTONE setting.
V-size setting
During keystone correction an error can occur in the
aspect ratio depending on the amount of lens shift. Use
the V-SIZE fine-tuning function to correct this error.
• V-SIZE is only displayed and can only be adjusted when performing
KEYSTONE correction.
Digital shift setting
For easier viewing, this function shifts the image
projected on the screen up or down eliminating either
the upper or lower black band found in 16:9 and other
wide aspect ratios.
• Digital shift function only works with BORDER, STRETCH or SMART
STRETCH of VIDEO and DTV inputs. (See page
The DIGITAL SHIFT screen is not displayed when projecting images
other than WIDE.
for details.)
35
Digital Shift
or
Press ∂.
Press ƒ.
E-24
XG-P25X/CD (E)-b
24
02.3.19, 7:04 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projection Distance
Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image.
Move the projector forward or backward if the edges of the image are distorted.
• The projector lens should be centered in the middle of the screen. If the lens center is not perpendicular to the screen, the image will be
distorted, making viewing difficult.
• Position the screen so that it is not in direct sunlight or room light. Light falling directly onto the screen washes out colors, making viewing
difficult. Close the curtains and dim the lights when setting up the screen in a sunny or bright room.
• A polarizing screen cannot be used with this projector.
Two optional lenses from Sharp are also available for specialized application. Please see your local Sharp Authorized
LCD Projector Dealer to details on all the lenses. (Refer to the lens operation manual when attaching a lens.) Also,
be sure to have service personnel install the AN-P9MX and AN-P48EZ optional lenses.
Throw Distance
The graph below is for 100 inches (254 cm) screen with 4:3 normal mode.
Screen
AN-P9MX
5Ј11Љ (1.8 m)
Throw distance ratio 1:0.9
Standard
12Ј1Љ–15Ј7Љ (3.7–4.8 m)
Throw distance ratio 1:1.8–2.4
AN-P48EZ
30Ј10Љ–40Ј4Љ (9.4–12.3 m)
Throw distance ratio 1:4.6–6.1
5
10
15
20
25
30
35
40 (ft)
Standard Setup (Front Projection)
X
Place the projector at the required distance from the screen according to the
desired picture size. (See pages to .)
H
27
29
L
• Two optional lenses from Sharp are available for specialized application. Please see
your local Sharp Authorized LCD Projector Dealer for details on all the lenses.
NORMAL Mode (4:3)
STRETCH Mode (16:9)
16
3
9
3
4
4
: Screen size and Picture size (4:3)
: Screen size and Picture size (16:9)
: Signal mask area
E-25
XG-P25X/CD (E)-b
25
02.3.19, 7:04 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projection Distance
Upper and Lower Lens Shift Position
• This projector is equipped with a lens shift function that lets you adjust the projection height.
• Adjust to match the setup configuration.
Screen size: 100 inches (254 cm)
STRETCH Mode: 16:9
Standard Lens as an example
Screen
Lens center
Upper lens shift position
(High mount setup)
Upper lens
shift position
H: 2
1ꢀ (62.3 cm) Lens center
Lower edge of screen (White portion) = Standard (0) point
Lower lens shift position
(Desktop setup)
–H
Lower lens shift position H:
מ 8.2ꢀ (מ 20.8 cm) Upper and Lower Lens Shift Position (Ceiling Mount)
When the projector is in the inverted position, use the upper edge of the screen as the base line, and exchange
the lower and upper lens shift values.
Screen
–H
Upper edge of screen
• Optimal image quality is produced with the projector positioned perpendicular to the screen with all feet flat and level. Tilting or angling
the projector will reduce the effectiveness of the lens shift function.
E-26
XG-P25X/CD (E)-b
26
02.3.19, 7:05 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projection Distance
Standard Lens
Throw distance ratio
1:1.8 to 2.4
NORMAL Mode (4:3)
Screen size (4:3) (X)
Diag. Width Height
Projection distance (L)
Lens center to the lower edge of the screen (H)
Upper lens shift position (h1 Lower lens shift position (h2)
Maximum (l1
)
48Ј 2Љ (14.7 m)
32Ј 2Љ (9.8 m)
24Ј 0Љ (7.3 m)
15Ј 7Љ (4.8 m)
13Ј 1Љ (4.0 m)
11Ј 2Љ (3.4 m)
9Ј 2Љ (2.8 m)
6Ј 2Љ (1.9 m)
Minimum (l2
)
37Ј 4Љ (11.4 m)
24Ј 6Љ (7.5 m)
18Ј 4Љ (5.6 m)
12Ј 1Љ (3.7 m)
10Ј 2Љ (3.1 m)
8Ј 5Љ (2.6 m)
7Ј 2Љ (2.2 m)
4Ј 6Љ (1.4 m)
)
300Љ
200Љ
150Љ
100Љ
84Љ
240Љ
160Љ
120Љ
80Љ
180Љ
120Љ
90Љ
60Љ
50Љ
43Љ
36Љ
24Љ
7Ј 6Љ (228.6 cm)
5Ј 0Љ (152.4 cm)
3Ј 9Љ (114.3 cm)
2Ј 6Љ (76.2 cm)
2Ј 1Љ (64.0 cm)
1Ј 10Љ (54.9 cm)
1Ј 6Љ (45.7 cm)
1Ј 0Љ (30.5 cm)
0.0Љ (0.0 cm)
0.0Љ (0.0 cm)
0.0Љ (0.0 cm)
0.0Љ (0.0 cm)
0.0Љ (0.0 cm)
0.0Љ (0.0 cm)
0.0Љ (0.0 cm)
0.0Љ (0.0 cm)
67Љ
72Љ
58Љ
60Љ
48Љ
40Љ
32Љ
The formula for screen size and projection distance
x: Screen size (diag.) (X) (inches)
l1 (Max.) = (0.0495x
מ 0.1302) ן 3.28 l2 (Min.) = (0.0383x
מ 0.1153) ן 3.28 h1 (Upper) = 0.3x
l: Projection distance (L) (feet)
h: Lens center to the lower edge of the screen (H) (inches)
h2 (Lower) = 0
STRETCH Mode
(16:9)
Screen size (4:3) (X)
Projection distance (L)
Maximum (l1 Minimum (l2
Lens center to the lower edge of the screen (H)
Diag.
Width
261Љ
174Љ
131Љ
116Љ
92Љ
Height
)
)
Upper lens shift position (h1
6Ј 2Љ (186.8 cm)
4Ј 1Љ (124.5 cm)
3Ј 1Љ (93.4 cm)
2Ј 9Љ (82.8 cm)
2Ј 2Љ (66.0 cm)
2Ј 1Љ (62.3 cm)
1Ј 11Љ (57.3 cm)
1Ј 9Љ (52.3 cm)
1Ј 6Љ (44.8 cm)
1Ј 3Љ (37.4 cm)
9.8Љ (24.9 cm)
)
Lower lens shift position (h2
מ 2Ј 1Љ (מ 62.3 cm) מ 1Ј 4Љ (מ 41.5 cm) מ 1Ј 0Љ (מ 31.1 cm) מ 10.9Љ (מ 27.6 cm) מ 8.7Љ (מ 22.0 cm) מ 8.2Љ (מ 20.8 cm) מ 7.5Љ (מ 19.1 cm) מ 6.9Љ (מ 17.4 cm) מ 5.9Љ (מ 14.9 cm) מ 4.9Љ (מ 12.5 cm) מ 3.3Љ (מ 8.3 cm) )
300Љ
200Љ
150Љ
133Љ
106Љ
100Љ
92Љ
147Љ
98Љ
74Љ
65Љ
52Љ
49Љ
45Љ
41Љ
35Љ
29Љ
20Љ
52Ј 5Љ (16.0 m)
34Ј 8Љ (10.6 m)
26Ј 2Љ (8.0 m)
23Ј 3Љ (7.1 m)
18Ј 4Љ (5.6 m)
17Ј 4Љ (5.3 m)
15Ј 7Љ (4.8 m)
14Ј 4Љ (4.4 m)
12Ј 5Љ (3.8 m)
10Ј 2Љ (3.1 m)
6Ј 6Љ (2.0 m)
40Ј 7Љ (12.4 m)
26Ј 9Љ (8.2 m)
20Ј 3Љ (6.2 m)
17Ј 7Љ (5.4 m)
14Ј 1Љ (4.3 m)
13Ј 5Љ (4.1 m)
12Ј 1Љ (3.7 m)
11Ј 2Љ (3.4 m)
9Ј 5Љ (2.9 m)
7Ј 9Љ (2.4 m)
5Ј 2Љ (1.6 m)
87Љ
80Љ
84Љ
73Љ
72Љ
63Љ
60Љ
52Љ
40Љ
35Љ
The formula for screen size and projection distance
l1 (Max.) = (0.0538x
מ 0.1242) ן 3.28 l2 (Min.) = (0.0417x
מ 0.1135) ן 3.28 h1 (Upper) = 0.2451x
x: Screen size (diag.) (X) (inches)
l: Projection distance (L) (feet)
h: Lens center to the lower edge of the screen (H) (inches)
h2 (Lower) =
מ 0.0817x • There is an error of
ע 3% in the formula above. • Values with a minus (
מ ) sign indicate the distance of the lens center below the bottom of the screen. E-27
XG-P25X/CD (E)-b
27
02.3.19, 7:05 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projection Distance
AN-P9MX
Throw distance ratio
1:0.9
NORMAL Mode (4:3)
Screen size (4:3) (X)
Diag. Width Height
Projection distance (L)
Lens center to the lower edge of the screen (H)
300Љ
200Љ
150Љ
100Љ
84Љ
240Љ
160Љ
120Љ
80Љ
180Љ
120Љ
90Љ
60Љ
50Љ
43Љ
36Љ
24Љ
18Ј 1Љ (5.5 m)
12Ј 0Љ (3.7 m)
9Ј 0Љ (2.7 m)
5Ј 11Љ (1.8 m)
4Ј 11Љ (1.5 m)
4Ј 2Љ (1.3 m)
3Ј 6Љ (1.1 m)
2Ј 3Љ (0.7 m)
7Ј 6Љ (228.6 cm)
5Ј 0Љ (152.4 cm)
3Ј 9Љ (114.3 cm)
2Ј 6Љ (76.2 cm)
2Ј 1Љ (64.0 cm)
1Ј 10Љ (54.9 cm)
1Ј 6Љ (45.7 cm)
1Ј 0Љ (30.5 cm)
67Љ
72Љ
58Љ
60Љ
48Љ
40Љ
32Љ
The formula for screen size and projection distance
x: Screen size (diag.) (X) (inches)
l: Projection distance (L) (feet)
l
= (0.0186x
מ 0.0563) ן 3.28 h = 0.3x
h: Lens center to the lower edge of the screen (H) (inches)
STRETCH Mode
(16:9)
Screen size (4:3) (X)
Projection distance (L)
Lens center to the lower edge of the screen (H)
Diag.
300Љ
200Љ
150Љ
133Љ
106Љ
100Љ
92Љ
Width
261Љ
174Љ
131Љ
116Љ
92Љ
Height
147Љ
98Љ
74Љ
65Љ
52Љ
49Љ
45Љ
41Љ
35Љ
29Љ
20Љ
19Ј 9Љ (6.0 m)
13Ј 2Љ (4.0 m)
9Ј 10Љ (3.0 m)
8Ј 8Љ (2.6 m)
6Ј 10Љ (2.1 m)
6Ј 6Љ (2.0 m)
5Ј 11Љ (1.8 m)
5Ј 4Љ (1.6 m)
4Ј 8Љ (1.4 m)
3Ј 9Љ (1.2 m)
2Ј 6Љ (0.8 m)
6Ј 2Љ (186.8 cm)
4Ј 1Љ (124.5 cm)
3Ј 1Љ (93.4 cm)
2Ј 9Љ (82.8 cm)
2Ј 2Љ (66.0 cm)
2Ј 1Љ (62.3 cm)
1Ј 11Љ (57.3 cm)
1Ј 9Љ (52.3 cm)
1Ј 6Љ (44.8 cm)
1Ј 3Љ (37.4 cm)
10.0Љ (24.9 cm)
87Љ
80Љ
84Љ
73Љ
72Љ
63Љ
60Љ
52Љ
40Љ
35Љ
The formula for screen size and projection distance
l
= (0.0203x
מ 0.0579) ן 3.28 x: Screen size (diag.) (X) (inches)
l: Projection distance (L) (feet)
h = 0.2451x
h: Lens center to the lower edge of the screen (H) (inches)
• There is an error of
ע 3% in the formula above. • Values with a minus (
מ ) sign indicate the distance of the lens center below the bottom of the screen. E-28
XG-P25X/CD (E)-b
28
02.3.19, 7:05 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Projection Distance
AN-P48EZ
Throw distance ratio
1:4.6 to 6.1
NORMAL Mode (4:3)
Projection distance (L)
Lens center to the lower edge of the screen (H)
Lower lens shift position (h2
)
Screen size (4:3) (X)
Diag.
Width
Height
l1)
Minimum (l2
)
Upper lens shift position (
h
1
)
Maximum (
0.0Љ (0.0 cm
0.0Љ (0.0 cm
0.0Љ (0.0 cm
0.0Љ (0.0 cm
0.0Љ (0.0 cm
)
)
)
)
)
240Љ
160Љ
120Љ
80Љ
180Љ
120Љ
90Љ
119Ј 9Љ (36.5
80Ј 1Љ (24.4
60Ј 0Љ (18.3
40Ј 4Љ (12.3
m)
m)
m)
m)
91Ј 6Љ (27.9 m)
61Ј 4Љ (18.7 m)
45Ј 11Љ (14.0 m)
30Ј 10Љ (9.4 m)
25Ј 11Љ (7.9 m)
22Ј 4Љ (6.8 m)
18Ј 8Љ (5.7 m)
7Ј 6Љ (228.6 cm)
5Ј 0Љ (152.4 cm)
3Ј 9Љ (114.3 cm)
2Ј 6Љ (76.2 cm)
2Ј 1Љ (64.0 cm)
1Ј 10Љ (54.9 cm)
1Ј 6Љ (45.7 cm)
300Љ
200Љ
150Љ
100Љ
84Љ
60Љ
67Љ
50Љ
33Ј 10Љ (10.3 m
)
0.0Љ (0.0 c
m)
58Љ
43Љ
29Ј 2Љ (8.9 m
)
72Љ
0.0Љ (0.0 cm
)
48Љ
36Љ
24Ј 3Љ (7.4 m
)
60Љ
The formula for screen size and projection distance
x: Screen size (diag.) (X) (inches)
l
(Max.) = (0.1214x
ם 0.1272) ן 3.28 l12 (Min.) = (0.0927x
ם 0.1233) ן 3.28 h (Upper) = 0.3x
l: Projection distance (L) (feet)
h: Lens center to the lower edge of the screen (H) (inches)
h12 (Lower) = 0
STRETCH Mode
(16:9)
Screen size (4:3) (X)
Projection distance (L)
Maximum (l1 Minimum (l2
Lens center to the lower edge of the screen (H)
Diag.
Width
261Љ
174Љ
131Љ
116Љ
92Љ
Height
)
)
Upper lens shift position (h1
6Ј 2Љ (186.8 cm)
4Ј 1Љ (124.5 cm)
3Ј 1Љ (93.4 cm)
2Ј 9Љ (82.8 cm)
2Ј 2Љ (66.0 cm)
2Ј 1Љ (62.3 cm)
1Ј 11Љ (57.3 cm)
1Ј 9Љ (52.3 cm)
1Ј 6Љ (44.8 cm)
1Ј 3Љ (37.4 cm)
)
Lower lens shift position (h2
מ 2Ј 1Љ (מ 62.3 cm) מ 1Ј 4Љ (מ 41.5 cm) מ 1Ј 0Љ (מ 31.1 cm) מ 10.9Љ (מ 27.6 cm) מ 8.7Љ (מ 22.0 cm) מ 8.2Љ (מ 20.8 cm) מ 7.5Љ (מ 19.1 cm) מ 6.9Љ (מ 17.4 cm) מ 5.9Љ (מ 14.9 cm) מ 4.9Љ (מ 12.5 cm) )
300Љ
200Љ
150Љ
133Љ
106Љ
100Љ
92Љ
147Љ
98Љ
74Љ
65Љ
52Љ
49Љ
45Љ
41Љ
35Љ
29Љ
130Ј 7Љ (39.8 m)
87Ј 3Љ (26.6 m)
65Ј 7Љ (20.0 m)
58Ј 1Љ (17.7 m)
46Ј 3Љ (14.1 m)
44Ј 0Љ (13.4 m)
40Ј 4Љ (12.3 m)
36Ј 9Љ (11.2 m)
31Ј 10Љ (9.7 m)
26Ј 7Љ (8.1 m)
99Ј 9Љ (30.4 m)
66Ј 7Љ (20.3 m)
50Ј 2Љ (15.3 m)
44Ј 7Љ (13.6 m)
35Ј 5Љ (10.8 m)
33Ј 6Љ (10.2 m)
30Ј 10Љ (9.4 m)
28Ј 3Љ (8.6 m)
24Ј 3Љ (7.4 m)
20Ј 4Љ (6.2 m)
87Љ
80Љ
84Љ
73Љ
72Љ
63Љ
60Љ
52Љ
The formula for screen size and projection distance
x: Screen size (diag.) (X) (inches)
l1 (Max.) = (0.1323x
ם 0.1272) ן 3.28 l2 (Min.) = (0.101x
ם 0.1233) ן 3.28 h1 (Upper) = 0.2451x
l: Projection distance (L) (feet)
h: Lens center to the lower edge of the screen (H) (inches)
h2 (Lower) =
מ 0.0817x • There is an error of
ע 3% in the formula above. • Values with a minus (
מ ) sign indicate the distance of the lens center below the bottom of the screen. E-29
XG-P25X/CD (E)-b
29
02.3.19, 7:05 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Projection
Rear Projection
• Place a translucent screen between the projector and
the audience.
• Use the projector’s menu system to reverse the
projected image. (See page
function.)
for use of this
51
• Optimal image quality can be achieved when the projector
is positioned perpendicular to the screen with all feet flat
and level.
Projection Using a Mirror
• When the distance between the projector and screen
is not sufficient for normal rear projection, you can
use a mirror to reflect the image onto the screen.
• Place a mirror (normal flat type) in front of the lens.
• Project the normal image onto the mirror.
• The image reflected from the mirror is projected onto
the translucent screen.
CAUTION
• When using a mirror, be sure to carefully position both the
projector and the mirror so the light does not shine into the
eyes of the audience.
Ceiling-mount Projection
• It is recommended that you use the optional Sharp
ceiling-mount bracket for this installation.
• Before mounting the projector, contact your nearest
Sharp Authorized LCD Projector Dealer or Service
Center to obtain the recommended ceiling-mount
bracket (sold separately). (AN-XGCM61 ceiling-mount
bracket and its AN-EP101AP extension tube (for
U.S.A.), or AN-NV6T ceiling-mount bracket and its AN-
TK201/AN-TK202 extension tubes (for countries other
than the U.S.A.))
• When the projector is in the inverted position, use the
upper edge of the screen as the base line.
• Use the projector’s menu system to select the
appropriate projection mode. (See page
of this function.)
for use
51
E-30
XG-P25X/CD (E)-b
30
02.3.19, 7:05 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Operation Buttons
Selecting the Input Signal Source
Projector
Remote control
Press INPUT 1.2.3 or INPUT 4.5 on the projector or
INPUT (1, 2, 3, 4 or 5) on the remote control to change
the mode.
• When no signal is received, “NO SIGNAL” will be displayed.
When a signal that the projector is not preset to receive is
received, “NOT REG.” will be displayed.
INPUT
On-screen Display
INPUT 2 Mode
INPUT 1 Mode
INPUT 4 Mode
INPUT 3 Mode
INPUT 5 Mode
Adjusting the Volume
Press VOLUME
/ to adjust the volume. Projector
Remote control
VOLUME
On-screen Display
Muting the Sound
Projector
Remote control
Press MUTE to temporarily turn off the sound.
Press MUTE again to turn the sound back on.
MUTE
On-screen Display
E-31
XG-P25X/CD (E)-c
31
02.3.19, 7:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Superimposing a Black Screen
Projector
Remote control This function can be used to superimpose a black
screen over the projected image.
Blacking out the Projected Image
Press BLACK SCREEN. The screen turns black and
“BLACK SCREEN” is displayed on the screen.To return
to the original projected image, press BLACK SCREEN
again.
BLACK
SCREEN
Projected Image
sg
Displaying a Still Image
Projector
Remote control
This function allows you to instantly freeze a moving
image. This is useful when you want to display a still
image from a computer or video, giving you more time
to explain the image to the audience.
You can also use this function to display a still image
from a computer while you make preparations for the
next computer images to be presented.
FREEZE
1 Press FREEZE to freeze the image.
2 Press FREEZE again to return to the moving image.
On-screen Display
E-32
XG-P25X/CD (E)-c
32
02.3.19, 7:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Magnifying a Specific Portion of an Image
Remote control
This function allows you to magnify a specific portion of
an image. This is useful when you want to display a
detailed portion of the image.
1 Press ENLARGE ( ) to zoom in.(Press ENLARGE
(
) to zoom out.)
∂/ƒ/ß/©
1 4 9 16 36 64 2 To return to
1, press UNDO. UNDO
• If you press ENLARGE ( ) when the zoom is set to
ן 1, no change will occur. And if you press ENLARGE ( ) when
the zoom is set to
ן 64, no change will occur. • If the input signal is changed during digital image
magnification, the image will return to
ן 1. The input signal is changed
ENLARGE
(a) when INPUT 1, 2, 3, 4 or 5 is pressed,
(b) when the input signal is interrupted, or
(c) when the input resolution and refresh rate changes.
On-screen Display
ן 4 Press ENLARGE (
to zoom in.
)
Pan Around the Screen
Enlarging the screen image and move it around.
When the image is magnified, press ∂/ƒ/ß/© to pan
and scan around the image.
Press ∂/ƒ/ß/©.
E-33
XG-P25X/CD (E)-c
33
02.3.19, 7:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying and Setting the Break Timer
Remote control
This function can be used to show the remaining time
for break during meeting.
1 Press BREAK TIMER. The timer starts to count
down from 5 minutes.
• You can set the Break Timer 1 to 60 minutes with ∂/ƒ.
The timer starts to count down as soon as ∂/ƒ is
pressed.
∂/ƒ
2 Press BREAK TIMER to cancel the Break Timer.
• The Break Timer is displayed against the background image
selected in “Selecting a Startup Image.” (See page 49
)
BREAK TIMER
On-screen Display
Computer Image Adjustments using AUTO SYNC
Projector
Remote control
This function can be used to automatically adjust a
computer image.
Press AUTO SYNC. During Auto Sync adjustment, the
On-screen Display changes as shown on the bottom
left.
AUTO
SYNC
• See page 45 “Auto Sync Adjustment” for setting the Auto
Sync.
• Auto Sync adjustment may take some time to complete,
depending on the image of the computer connected to the
projector.
On-screen Display
g
f
s
E-34
XG-P25X/CD (E)-c
34
02.3.19, 7:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture Aspect Ratio
Projector
This function allows you to modify or customize the
picture display mode to enhance the input image.
Depending on the input signal, you can choose
NORMAL, FULL, DOT BY DOT, BORDER, STRETCH or
SMART STRETCH image.
Remote control
UNDO
1 Press RESIZE. Each time RESIZE is pressed, the
picture mode changes as shown below.
RESIZE
2 To return to the standard image, press UNDO while
“RESIZE” is displayed on the screen.
COMPUTER
NORMAL
1024
ן 768 1024
ן 768 1024
ן 768 FULL
DOT BY DOT
800
ן 600 –
SVGA (800
ן 600) –
–
–
XGA (1024
ן 768) SXGA (1280
ן 960) UXGA (1600
ן 1200) SXGA (1280
ן 1024) 4:3 aspect ratio
1280
ן 960 1024
ן 768 –
1600
ן 1200 960
ן 768 1024
ן 768 1280
ן 1024 Other aspect ratios
• “NORMAL” is fixed when XGA (1024
ן 768) signals are entered. Output screen image
NORMAL
FULL
DOT BY DOT
Input Signal
Projects a full screen image
while maintaining the
aspect ratio.
Projects a full screen image
while ignoring the
aspect ratio.
Projects the original
resolution signal of the image.
Resolution lower
than XGA
4:3 aspect ratio
4:3 aspect ratio
4:3 aspect ratio
XGA
Resolution higher
than XGA
SXGA
(1280
ן 1024) E-35
XG-P25X/CD (E)-c
35
02.3.19, 7:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture Aspect Ratio
VIDEO
NORMAL
1024
ן 768 –
BORDER
STRETCH
SMART STRETCH
4:3 aspect ratio
Letter box, squeeze
480
I, 480P, 580I, 580P,
768
ן 576* 1024
ן 576* NTSC, PAL, SECAM
1024
ן 576* 720P, 1035
I, 1080
I
–
–
16:9 aspect ratio
• “STRETCH” is fixed when 720P, 1035I or 1080I signals are entered.
* The Digital Shift function can be used with these images.
Output screen image
NORMAL
Projects a full screen image.
BORDER
STRETCH
SMART STRETCH
Projects the image fully in a 16:9 screen by
enlarging only the surrounding areas while
keeping the aspect ratio in the middle part of
the image at 4:3.
Projects 4:3 image fully in
STRETCH (the following
column) image.
Projects 16:9 image evenly
over entire screen (top/
bottom black bands).
Input Signal
4:3 aspect ratio
480
I, 480P, 580I, 580P,
NTSC, PAL, SECAM
Letter box
Squeeze
720P, 1035I, 1080I
16:9 aspect ratio
E-36
XG-P25X/CD (E)-c
36
02.3.19, 7:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Gamma Correction Function
Projector
• Gamma is an image quality enhancement function
that offers a richer image by brightening the darker
portions of the image without altering the brightness
of the brighter portions.
Remote Control
UNDO
• Four gamma settings are available to allow for
differences in the images displayed and in the
brightness of the room.
• When you are displaying images with frequent, dark
scenes, such as a film or concert, or when you are
displaying images in a bright room, this feature makes
the dark scenes easier to see and gives the
impression of greater depth in the image.
GAMMA
Gamma Modes
Selected Mode Gamma mode
STANDARD
Standard picture without gamma correction.
On-screen Display
(Example: RGB mode)
PRESENTATION Brightens darker portions of image for more
STANDARD
PRESENTATION
CINEMA
enhanced presentations.
CINEMA
CUSTOM
Gives greater depth to darker portions of image
for a more exciting theater experience.
Allows you to adjust gamma value using Sharp
Advanced Presentation Software.
1 Press GAMMA. Each time GAMMA is pressed,
the gamma level toggles as shown on the left.
2 To return to the standard image, press UNDO while
“GAMMA” is displayed on the screen.
• The CUSTOM setting of VIDEO mode optimizes the video
source to reproduce the image more beautifully. It darkens
bright portions of the image and gives greater depth to
darker portions of the image.
Select CUSTOM as your default setting if you prefer a
smooth textured image to a sharply contrasted one.
• STANDARD and CINEMA settings of VIDEO mode (except
COMPONENT 480P/580P/720P/1035I/1080I) incorporate a
DYNAMIC GAMMA function for optimizing GAMMA
correction frame by frame in real time, thus providing a more
beautiful image.
CUSTOM
• PRESENTATION settings are the same for both RGB and
VIDEO modes.
E-37
XG-P25X/CD (E)-c
37
02.3.19, 7:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the GUI (Graphical User Interface) Menu Screen
Basic Operations
This projector has two sets of menu screens that allow you to adjust the image and various projector
settings. These menu screens can be operated from the projector or the remote control with the following
procedure.
Projector
Remote control
MENU
∂/ƒ/ß/©
UNDO
ENTER
(GUI) On-screen Display
INPUT 1, 2 (RGB) or 3 (DIGITAL) mode
(Example)
Press MENU to display the INPUT 1, 2, 3, 4 or 5
mode menu bar.
1
1
4
2
2 Press ß/© to select an adjustment menu on the
menu bar.
3
Press ∂/ƒ to select a specific adjustment item.
3
To display a single adjustment item, press ENTER
after selecting the item. Only the menu bar and
the selected adjustment item will appear.
4
5
2
5 Press ß/© to adjust the item.
Press UNDO to return to the previous screen.
6
To exit from the GUI, press MENU.
7
5
• For details on items on the menu screen, see the tree charts on
pages
and
.
39
40
INPUT 4, 5 (VIDEO) mode
(Example)
1
2
3
5
E-38
XG-P25X/CD (E)-d
38
02.3.19, 7:07 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Bars
Items on the INPUT 1, 2 or 3 Mode Menu Bar
Sub menu
Sub menu
Main menu
Main menu
Picture
Contrast
מ 30 ם 30 מ 30 ם 30 מ 30 ם 30 מ 30 ם 30 מ 30 ם 30 מ 30 ם 30 מ 30 ם 30 מ 3 ם 3 Options (2)
Lamp Timer
Front
Bright
Color
PRJ Mode
Ceiling
ם Front Rear
Tint
Sharp
Red
Ceiling
ם Rear Normal
Stack Setting
Keylock Level
Set Inputs
Blue
RGB
Master
CLR Temp
Reset
Signal Type
Component
2D Progressive
3D Progressive
Film Mode
Resolution
Slave
Normal
Level A
Progressive Mode
Level B
Fine Sync
Clock
מ 150 ם 150 Vert Freq
75 Hz
72 Hz
Input 1
[ON/OFF]
[ON/OFF]
[ON/OFF]
[ON/OFF]
[ON/OFF]
1
800
ן 600 Phase
מ 60 ם 60 מ 150 ם 150 מ 60 ם 60 Input 2
2
640
ן 480 •
H-Pos
Input 3
•
7
V-Pos
Input 4
Reset
Resolution
800
ן 600 640
ן 480 Vert Freq
75 Hz
72 Hz
Input 5
1
Save Setting
9600bps
38400bps
115200bps
ID No.
RS-232C
2
•
Select Setting
Special Modes
Signal Info
•
7
Resolution
Set ID No.
Password
1
Auto Sync
Old Password
New Password
Reconfirm
2
•
Auto Sync Disp [ON/OFF]
•
7
Language
English
Resolution 640
ן 480 Hor Freq
Vert Freq
37.5 kHz
72 Hz
Deutsch
Español
Nederlands
Français
Italiano
Off
Normal
High Speed
Balance
Treble
מ 30 ם 30 מ 30 ם 30 מ 30 ם 30 Audio
Svenska
Português
Bass
Reset
Audio Out
Speaker
Pict in Pict
OSD Display
FAO
VAO
[ON/OFF]
[ON/OFF]
Options (1)
Status
Normal
Level A
Level B
Sharp
Custom
Blue
Background
None
• The resolution, vertical frequency and horizontal
frequency figures displayed above are for example
purposes only.
Startup Image
Sharp
Custom
None
• “Color”, “Tint”, and “Sharp” appear only when
Component input is selected in INPUT 1 or 2 mode. For
INPUT 3 (DVI), in “Picture” menu, only “CLR Temp” is
active and the other menus are displayed in gray. In “Fine
Sync” menu, only “Signal Info” is active and the other
menus are displayed in gray.
Economy Mode
Power Save
[LOW POWER/STANDARD]
MNTR Out/RS232C[ON/OFF]
Auto Power Off [ON/OFF]
• Only the items highlighted in the tree charts above can
be adjusted.
• To adjust the items under the sub menu, press © after
selecting the sub menu.
E-39
XG-P25X/CD (E)-d
39
02.3.19, 7:07 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Bars
Items on the INPUT 4 or 5 Mode Menu Bar
Sub menu
Sub menu
Lamp Timer
Main menu
Picture
Main menu
Options (2)
Contrast
מ 30 ם 30 מ 30 ם 30 מ 30 ם 30 מ 30 ם 30 מ 30 ם 30 מ 30 ם 30 מ 30 ם 30 מ 3 ם 3 Front
Bright
Color
Tint
PRJ Mode
Ceiling
ם Front Rear
Sharp
Red
Ceiling
ם Rear Normal
Stack Setting
Keylock Level
Set Inputs
Blue
Master
CLR Temp
Reset
Slave
Normal
Progressive Mode
2D Progressive
3D Progressive
Film Mode
Level A
Level B
[ON/OFF]
[ON/OFF]
[ON/OFF]
[ON/OFF]
[ON/OFF]
Input 1
Balance
Treble
מ 30 ם 30 Audio
Input 2
מ 30 ם 30 Input 3
Bass
מ 30 ם 30 Input 4
Reset
Input 5
Audio Out
Speaker
DNR
FAO
VAO
9600bps
38400bps
115200bps
ID No.
RS-232C
[ON/OFF]
[ON/OFF]
Options (1)
OSD Display
Normal
Level A
Level B
Auto
Set ID No.
Password
Old Password
New Password
Reconfirm
Video System
PAL (50/60Hz)
SECAM
NTSC4.43
NTSC3.58
PAL–M
PAL–N
Sharp
Language
English
Deutsch
Español
Nederlands
Français
Italiano
Background
Svenska
Português
Custom
Blue
None
Startup Image
Sharp
Custom
None
Status
Economy Mode
Power Save
[LOW POWER/STANDARD]
MNTR Out/RS232C[ON/OFF]
Auto Power Off [ON/OFF]
• Only the items highlighted in the tree charts above can be adjusted.
• To adjust the items under the sub menu, press © after selecting the sub menu.
E-40
XG-P25X/CD (E)-d
40
02.3.19, 7:07 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture
You can adjust the projector’s picture to your preferences with the following picture settings. See page
for the procedure details.
38
e. g. RGB input in INPUT 1 or 2 mode
Selected item ß button
© button
Contrast
For more contrast
For less contrast
Bright
Color
Tint
For more brightness
For more color intensity
Skin tones become greenish
For more sharpness
For stronger red
For less brightness
For less color intensity
Skin tones become purplish
For less sharpness
For weaker red
Sharp
Red
Blue
For stronger blue
For weaker blue
All image adjustment items are returned to the factory preset
settings.
Reset
• “Color”, “Tint” and “Sharp” do not appear for RGB input in INPUT 1 or 2 mode.
• To reset all adjustment items, select “Reset” on the “Picture” menu screen and press ENTER.
• The adjustments can be stored separately in the INPUT 1 to 5 modes.
• Depending on the type of signal received, “Sharp” may not be adjustable for COMPONENT input in INPUT 1 or 2 mode.
Adjusting the Color Temperature
This function can be used to adjust the color temperature to suit the type of image input to the projector
(video, computer image, TV broadcast, etc.). Decrease the color temperature to create warmer, reddish
images for natural flesh tones, or increase to create cooler, bluish images for a brighter picture.
מ 3 (Red) ß button
ם 3 © button (Blue)
Decreases color temperature for
warmer, reddish,
incandescent-like images.
(Low color temperature)
Increases color temperature for
cooler, bluish, florescent-like
images.
(High color temperature)
Selecting the Signal Type (RGB menu only)
This function allows you to select the input signal type RGB or COMPONENT for INPUT 1 or 2 port.
E-41
XG-P25X/CD (E)-d
41
02.3.19, 7:08 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture
Progressive Mode
This function allows you to select the progressive display of a video signal. The progressive display
projects a smoother video image. See page 38 for the procedure details.
Selects the progressive conversion mode.
2D Progressive
This function is useful to display fast-moving images such
as sports and action films. This mode optimizes the image
in a displayed frame.
3D Progressive
This function is useful to display relatively slow-moving
images such as drama and documentary more clearly.
This mode optimizes the image by estimating the movement
of a number of preceding and succeeding frames.
Film Mode
Reproduces the image of film source clearly. Displays the
optimized image of film transformed with three-two pull down
(NTSC and PAL 60Hz) or two-two pull down (PAL 50Hz and
SECAM) enhancement to progressive mode images.
* The film source is a digital video recording with the original
encoded as is at 24 frames/second. The projector can
convert this film source to progressive video at 60 frames/
second with NTSC and PAL60Hz or at 50 frames/second
with PAL50Hz and SECAM to play back a high-difinition
image.
• When using progressive inputs, these inputs are directly displayed therefore 2D Progressive, 3D Progressive and Film
Mode cannot be selected. These modes can be selected in interlace signals other than 1080I.
• In NTSC or PAL60Hz, even if the 3D Progressive mode has been set, the three-two pull down enhancement will be
enabled automatically, when the film source has been entered.
• In PAL50Hz or SECAM, the two-two pull down enhancement will be enabled only in the Film Mode, when the film source
has been entered.
E-42
XG-P25X/CD (E)-d
42
02.3.19, 7:08 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Computer Images (RGB menu only)
When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference
may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions
of the screen. Should this occur, adjust “Clock”, “Phase”, “H-Pos” and “V-Pos” for the optimum computer
image. See page 38 for the procedure details.
Select the desired computer input mode with INPUT 1 or 2.
Clock
Adjusts vertical noise.
Phase
Adjusts horizontal noise (similar to tracking on your VCR).
H-Pos
Centers the on-screen image by moving it to the left or
right.
V-Pos
Centers the on-screen image by moving it up or down.
• Computer image adjustments can be made easily by pressing AUTO SYNC ( ). See page
for details.
45
• To reset all adjustment items, select “Reset” on the “Fine Sync” menu screen and press ENTER.
Saving and Selecting Adjustment Settings
This projector allows you to store up to seven adjustment settings for use with various computers. Once
these settings are stored, they can be easily selected each time you connect a computer to the projector.
Saving the adjustment setting
Selecting a saved setting
• If a memory position has not been set, a resolution and frequency setting will not be displayed.
• When selecting the stored adjustment setting with “Select Setting”, the computer system should match the stored setting.
E-43
XG-P25X/CD (E)-d
43
02.3.19, 7:08 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Computer Images (RGB menu only)
Special Mode Adjustment
Ordinarily, the type of input signal is detected and the correct resolution mode is automatically selected.
However, for some signals, the optimal resolution mode in “Special Modes” on the “Fine Sync” menu
screen may need to be selected to match the computer display mode. See page 38 for the procedure
details.
• Avoid displaying computer patterns which repeat every other line (horizontal stripes). (Flickering may occur, making the
image hard to see.)
• When inputting DTV 480P or 1080I signals, select the corresponding type of signal.
Checking the Input Signal
This function allows you to check the current input signal information.
E-44
XG-P25X/CD (E)-d
44
02.3.19, 7:08 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Computer Images (RGB menu only)
Auto Sync Adjustment
• Used to automatically adjust a computer image.
• Auto Sync adjustment can be made manually by pressing AUTO SYNC, or automatically by setting
“Auto Sync” to “Normal” or “High Speed” in the projector’s GUI menu. See page 38 for the procedure
details.
Off
• Synchronized adjustment is not automatically performed.
• Press AUTO SYNC to perform manual adjustment.
Normal
• Synchronized adjustment is automatically performed the
same as the “High Speed” setting.
• Adjustment using the “Normal” setting takes longer to
perform than using the “High Speed” setting, but it is more
accurate.
High Speed
• The sync adjustment is automatically made each time the
projector is turned on while connected to a computer or
the input selection is changed.
• The Auto Sync adjustment setting previously made is
cleared when the projector’s setting is changed.
• Automatic adjustments can be made by pressing AUTO SYNC.
• When performing AUTO SYNC in Off or High Speed mode, if you press AUTO SYNC once, then press it again within one
minute, AUTO SYNC will be executed in Normal mode.
• Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector.
• When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page
.)
43
Auto Sync Display Function
Normally, an image is not superimposed during Auto Sync adjustment. You can, however, choose to
superimpose a background image during Auto Sync adjustment.
E-45
XG-P25X/CD (E)-d
45
02.3.19, 7:08 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Sound
This projector’s audio is factory preset to standard settings. However, you can adjust it to suit your own
preferences by adjusting the following audio settings. See page 38 for the procedure details.
Selected item ß button
© button
Balance
Treble
Bass
Increased audio from the left speaker Increased audio from the right speaker
For weaker treble
For weaker bass
For stronger treble
For stronger bass
Reset
All audio adjustment items are returned to the factory preset settings.
• To reset all adjustment items, select “Reset” on the “Audio” menu screen and press
ENTER.
Audio Out
FAO (Fixed audio output): Audio output that does not vary in strength with
the volume level of the source projector.
VAO (Variable audio output): Audio output that varies in strength with the
volume level of the source projector.
Speaker
Switching the built-in speakers on the projector ON/OFF.
E-46
XG-P25X/CD (E)-d
46
02.3.19, 7:08 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying Dual Pictures (RGB menu only)
Picture in Picture function allows you to display two pictures on the same screen. You can display the
image input from INPUT 4 or 5 as an inset picture overlapping the main picture input from INPUT 1, 2 or
3. See page 38 for the procedure details.
300
250
200
150
100
50
A
B
C
0
1996
1997
1998
1
Press ß to select “ ” to display an inset picture (Factory preset to INPUT 4).
1
2
Press ß/©/∂/ƒ to move the inset picture to one of four preset positions.
• The image from INPUT 1, 2 or 3 is displayed as the main picture and the image from INPUT 4 or 5 is displayed as the inset picture.
• The last displayed image from INPUT 4 or 5 is displayed as the inset picture.
For example, when you want to display the image from INPUT 4 as the inset picture, select INPUT 4, then select the main picture, and
then select “Pict in Pict”.
• Inset picture can only be displayed in video signal of NTSC/PAL/SECAM.
• When selecting the image for the inset picture, only the images being input will be displayed.
• The audio of the inset picture will come out of the projector’s speakers.
• Picture in Picture does not work in case of the following RGB signals.
UXGA signal image/Interlaced signal/DTV (480P/580P/720P/1035I/1080I)
• You can only use the following functions while in Picture in Picture mode.
FREEZE: Works for the inset picture only.
Reducing Image Noise (VIDEO menu only)
Digital Noise Reduction (DNR) provides high quality images with minimal dot crawl and cross color
noise. See page 38 for the procedure details.
• If the image is clear, select “ ” to prevent any blurring.
E-47
XG-P25X/CD (E)-d
47
02.3.19, 7:08 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning On/Off the On-screen Display
This function allows you to turn on or off the on-screen messages that appear during input select.
See page 38 for the procedure details.
Selected item
Description
Normal
Level A
All On-screen Display are displayed.
Input/Custom/Freeze/Enlarge/Auto sync/Volume/Mute/
Black screen functions are not displayed.
Level B
All On-screen Display are not displayed (except Menu/
Lens functions and warning display (Power off/Temp./
Lamp function etc.)).
Setting the Video Signal (VIDEO menu only)
The video input system mode is preset to “Auto”; however, it can be changed to a specific system mode
if the selected system mode is not compatible with the connected audiovisual equipment. See page
38 for the procedure details.
• When the system mode is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur,
switch to the video system of the source signal.
• AUTO cannot be set for PAL-M and PAL-N input signals. Select “PAL-M” or “PAL-N” in “Video System” menu for PAL-M and
PAL-N input signals.
E-48
XG-P25X/CD (E)-d
48
02.3.19, 7:08 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a Background Image
This function allows you to select the image displayed when no signal is being sent to the projector. See
page 38 for the procedure details.
Selected item
Sharp
Description
SHARP default image
User customized image (e.g. company logo)
Blue screen
Custom
Blue
None
Black screen
• By selecting “Custom”, the projector can display a custom image (e.g. your company logo) as the background image. The
custom image must be a 256-color BMP file with a picture size no larger than 1,024
ן 768 pixels. Please see the Sharp Advanced Presentation Software operation manual on the CD-ROM for how to save (or change) a custom image.
Selecting a Startup Image
This function allows you to specify the image to be displayed upon the projector’s startup.
A custom image (e.g. your company logo) can be uploaded to the projector via an RS-232C cable. See
page 19 in this operation manual, and also the supplied Sharp Advanced Presentation Software
operation manual on the CD-ROM for detailed instructions. See page 38 for the procedure details.
Selected item
Sharp
Description
SHARP default image
User customized image (e.g. company logo)
Black screen
Custom
None
• By selecting “Custom”, the projector can display a custom image (e.g. your company logo) as the startup image. The
custom image must be a 256-color BMP file with a picture size no larger than 1,024
ן 768 pixels. Please see the Sharp Advanced Presentation Software operation manual on the CD-ROM for how to save (or change) a custom image.
E-49
XG-P25X/CD (E)-d
49
02.3.19, 7:08 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Economy Mode
These functions allow you to reduce the power consumption when the projector is in standby mode.
See page 38 for the procedure details.
Power Save Function
Function to control the quantity of projected light. Select “Low Power Mode” or “Standard Mode” to decrease or
increase brightness and power consumption.
Quantity of light is 80%.
Power consumption is 330W.
Quantity of light is 100%.
Power consumption is 380W.
• “Power Save” mode is factory preset to “(Standard Mode)”.
• When selecting “ (Standard Mode)” in “Power Save Mode”, fan noise increases.
• Even when selecting “ (Low Power Mode)” in “Power Save Mode”, fan noise may increase if internal temperature rises
enough to activate the cooling function.
Monitor Out/RS-232C Off Function
This projector consumes power when using a monitor connected to the OUTPUT port for INPUT 1, 2 and a
computer connected to the RS-232C port. When not using these ports, “MNTR Out/RS232C” can be set to “ ” to
reduce standby power consumption.
Standby power for Monitor Out/RS-232C
connection turned off.
Monitor Out/RS-232C on
CAUTION
• Set “MNTR Out/RS232C” to “ ” when using the Sharp Advanced Presentation Software (supplied).
Automatic Power Shutoff Function
When no input signal is detected for more than 15 minutes, the projector will automatically shut off. The on-screen
message, “Power OFF in 5 min.” will appear five minutes before the power is automatically turned off.
Power automatically shuts off after about 15
minutes of no signal input.
Automatic Power Shutoff disabled.
• “MNTR Out/RS232C” is factory preset to “ ”, and “Auto Power Off” is factory preset to “ ”.
E-50
XG-P25X/CD (E)-d
50
02.3.19, 7:08 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Confirming the Lamp Usage Time
This function allows you to check the accumulated lamp usage time. See page
details.
for the procedure
38
• It is recommended that the lamp be replaced after approximately 1,400 cumulative hours of use. See pages
lamp replacement.
and
for
63
62
Reversing/Inverting Projected Images
This projector is equipped with a reverse/invert image function which allows you to reverse or invert the
projected image for various applications. See page for the procedure details.
38
Selected item
Front
Description
Normal image
Ceiling
ם Front Rear
Inverted image
Reversed image
Reversed and inverted image
Ceiling
ם Rear • This function is used for the reversed image and ceiling-mount setups. See page
for these setups.
30
E-51
XG-P25X/CD (E)-e
51
02.3.19, 7:10 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Stacking Mode
You can double the brightness of an image by stacking two projectors and projecting same picture
simultaneously. To control two projectors, assign one as the master and one as the slave. The slave
38
projector will duplicate any operational settings made to the master projector. See page
procedure details.
for the
• When the projector is set to “Master”, button operation signals will be transmitted through RS-232C.
• When the projector is set to “Slave”, operations follow the button operations sent from the “Master”.
• When set to slave, all buttons on the projector along with ∂/ƒ/ß/©, ENTER, UNDO, POWER ON, POWER OFF, LENS and
MENU on the remote control can be used. The slave cannot operate the other buttons on remote control.
• For details on intended purpose, see pages
and
.
59
60
Locking the Operation Buttons on the Projector
This function can be used to lock the use of certain operation buttons on the projector. The user can still
38
operate the projector fully with the remote control. See page
for the procedure details.
Selected item
Normal
Description
All operation buttons are functional.
Level A
Only Input/Volume/Mute functions on the
projector are available.
Level B
All operation buttons on the projector are
unavailable.
• To cancel the Keylock Level, perform the above procedure using the remote control.
• See page
for details using the password function.
55
E-52
XG-P25X/CD (E)-e
52
02.3.19, 7:10 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Deselecting Inputs
This function allows you to deselect unwanted signal input. See page
for the procedure details.
38
• When stack projecting, multi-screen projecting and so on, this function can be used to cancel the RS-232C control.
• Up to two input signals can be blocked for both Input 1, 2, 3 or Input 4, 5.
• For details on intended purpose, see pages
and
.
59
60
Selecting the Transmission Speed (RS-232C)
This menu allows you to adjust the transmission speed of the RS-232C connection by selecting the
baud rate. See page
for the procedure details.
38
• Make sure that both the projector and computer are set for the same baud rate. Refer to the computer’s operation manual
for instructions for setting the baud rate.
E-53
XG-P25X/CD (E)-e
53
02.3.19, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Controling Multiple Projectors with ID Numbers
This projector can form a network of up to 250 projectors. To identify separately and control specified
projector, you need to set ID No.. The ID No. is factory preset to “001”. See page
details.
for the procedure
38
Setting the ID No.
Press © to select the first digit and ∂/ƒ to select the desired number. Continue this procedure for the remaining
two digits.
• Be sure to set the ID No. in the Option menu and attach a corresponding number seal to the projector.
• The ID No. can be set from 001 to 250.
• For details on intended purpose, see pages
to
.
57
60
E-54
XG-P25X/CD (E)-e
54
02.3.19, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Protecting Important Settings with a Password
A password can be set by the user and used with the keylock level to prevent adjustments to certain
settings on the GUI. See page
for the procedure details.
38
• When password is set, you need to enter the password to use “PRJ Mode”, “Stack Setting”, “Keylock Level”, “Set Inputs”,
“RS-232C” and “Set ID No.” menus.
Setting the Password
1
2
Enter the new password using ∂/ƒ to select the desired number, and then press © to select the next digit.
Continue this procedure for the remaining three digits, and then press ENTER.
Enter the password again (“Reconfirm”) using ∂/ƒ/ß/©, and then press ENTER.
• After setting the password, be sure to write it down in a secure location in case you can not remember it.
Changing the Password
1
2
3
Enter the old password using ∂/ƒ/ß/©, and then press ENTER.
Enter the new password using ∂/ƒ/ß/©, and then press ENTER.
Enter the password again (“Reconfirm”) using ∂/ƒ/ß/©, and then press ENTER.
E-55
XG-P25X/CD (E)-e
55
02.3.19, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the On-screen Display Language
English is the preset language for the On-screen Display; however, this can be changed to German,
Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese. See page 38 for
the procedure details.
Displaying the Adjustment Settings
This function can be used to display all the adjusted settings on the screen simultaneously. See page
38 for the procedure details.
INPUT 1, 2 (RGB) or 3 (DIGITAL) mode
INPUT 4, 5 (VIDEO) mode
E-56
XG-P25X/CD (E)-e
56
02.3.19, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Extended Functionality Features
This projector has outstanding network capability.
• Internet access for self-diagnosis
• Multiple and group projector control
• Simultaneous multiple projector control
Internet access for self-diagnosis, status information and preventive
maintenance
LAN
E-mail
E-mail
Internet
LAN
LAN
This projector can be used in a network of up to 250 projectors managed from a single PC with the accompanied
Sharp Advanced Presentation Software Professional Edition. This projector can be connected to a PC using an
RS-232C connection. Output terminals are provided (RS-232C on the projector) enabling a daisy chain configuration
and eliminating the need for a distributor.
This projector is also equipped with a function to send status information (lamp usage time, etc.) to a Sharp
Service Center or outside contractor for quick and efficient customer service.
• For more information on these features, see the operation manuals accompanying the Sharp Advanced Presentation Software
Professional Edition.
E-57
XG-P25X/CD (E)-f
57
02.3.19, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
UsingExtendedFunctionalityFeatures
Multiple and group projector control via computer
Building
RS-232C
3rd Floor
RS-232C
Control PC
Sharp Advanced
2nd Floor
1st Floor
Presentation Software
“Professional Edition”
RS-232C
Video
Source 1
Video
Source 2
This projector can be used in a network of projectors managed from a single PC with the accompanied Sharp
Advanced Presentation Software Professional Edition. Projectors in conference rooms on the first and third floors
of a building, for example, can be used for video presentations, while projectors on the second floor can be used
for PC-assisted presentations. Projectors can even be powered down at different times (e.g., projectors on the first
and second floors are powered down in one hour, while those on the third floor are powered down in two hours).
• For more information on these features, see the operation manuals accompanying the Sharp Advanced Presentation Software
Professional Edition.
• Transmission performance of the RS-232C cable can vary depending on the surrounding conditions. Use the transmission
repeater if performance is not up to par.
• We recommend you use an RS-232C cable not longer than 49Ј 3Љ (15 m).
E-58
XG-P25X/CD (E)-f
58
02.3.19, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Extended Functionality Features
Simultaneous multiple projector control for stacking and videowall
projection
Stack Projection
Stack Setting
Set Inputs
INPUT1 Yes
INPUT2 Yes
INPUT3 No
INPUT4 Yes
INPUT5 Yes
Master
Master
INPUT1
INPUT2
INPUT4
INPUT5
OUTPUT
RS-232C IN RS-232C OUT
Distributor
Laser Disc
Stack Setting
Set Inputs
INPUT1 Yes
INPUT2 No
INPUT3 No
INPUT4 Yes
INPUT5 Yes
Slave
Slave
INPUT1
INPUT2
INPUT4
INPUT5
OUTPUT
DVD
RS-232C IN RS-232C OUT
For brighter images, two projectors can be stacked using the Stack Setting function, with one projector set as the
Master and the other as the Slave. The operations of the Slave projector are controlled by the Master projector
during projection through an RS-232C connection. The RS-232C cable (cross type, sold separately) is connected
from the RS-232C output on the Master projector to the RS-232C input on the Slave projector.
Projectors can be stacked using an RS-232C cable (cross type, sold separately).
See page
for recommended connection of an RS-232C serial control cable.
67
• See page
, “Setting the Stacking Mode”, and page
, “Deselecting Inputs”.
53
52
E-59
XG-P25X/CD (E)-f
59
02.3.19, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Extended Functionality Features
Videowall
Sharp Advanced
Presentation Software
“Professional Edition”
Control PC
RGB
SOURCE1
Master
Set Inputs
001
003
RGB
SOURCE2
Master
Slave
INPUT1 Yes
INPUT2 Yes
INPUT3 No
INPUT4 Yes
INPUT5 Yes
INPUT1
OUTPUT
INPUT1
INPUT2
INPUT4
INPUT5
OUTPUT
INPUT2
INPUT4
INPUT5
RS-232C IN RS-232C OUT
RS-232C IN RS-232C OUT
Distributor
Slave
Set Inputs
002
004
Slave
Slave
INPUT1
INPUT2
INPUT4
INPUT5
OUTPUT
INPUT1
INPUT2
INPUT4
INPUT5
OUTPUT
INPUT1 Yes
INPUT2 No
INPUT3 No
INPUT4 Yes
INPUT5 No
VIDEO
SOURCE
RS-232C IN RS-232C OUT
RS-232C IN RS-232C OUT
DVD
This projector can be used together with other projectors managed using the accompanied Sharp Advanced
Presentation Software Professional Edition to create a videowall projection. Whereas conventional videowall
technology required the use of an image distributor, this projector videowall feature enables easy image settings
from a PC when inputting a single video source. This function greatly simplifies videowall setup.
RS-232C OUTPUTS also realize the simple daisy chain connection. The master projector directly connected to the
computer can make the daisy chain connection with multiple slave projectors. For details on setting master or
slave, see page
.
52
• Use a videowall projector stand, sold separately, when using this function.
• Image quality may deteriorate when picture signals are input through multiple projectors in a daisy chain
connection.
• For more information on this feature, see the operation manuals accompanying the Sharp Advanced Presentation Software
Professional Edition.
• When UXGA signal is displayed, the videowall can not be set by Sharp Advanced Presentation Software Professional Edition.
E-60
XG-P25X/CD (E)-f
60
02.3.19, 7:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Lamp/Maintenance Indicators
Maintenance Indicators
• The warning lights on the projector indicate problems
inside the projector.
• There are two warning lights: a TEMPERATURE
WARNING indicator which warns that the projector is
too hot, and a LAMP REPLACEMENT indicator which
lets you know when to change the lamp.
• If a problem occurs, either the TEMPERATURE
WARNING indicator or the LAMP REPLACEMENT
indicator will light up red. After turning off the power,
follow the procedures given below.
POWER
indicator
LAMP
REPLACEMENT
indicator
TEMPERATURE
WARNING
indicator
Maintenance Indicator
Condition
The internal
temperature is
Problem
Possible Solution
• Blocked air intake.
• Relocate the projector to an area with
proper ventilation.
TEMPERATURE
WARNING indicator
abnormally high.
• Clogged air filter.
• Clean the filter.
(See page
.)
64
• Cooling fan breakdown.
• Internal circuit failure.
• Take the projector to your nearest Sharp
Authorized LCD Projector Dealer or Service
Center for repair.
• Burnt-out lamp.
• Lamp circuit failure.
• Carefully replace the lamp. (See pages
The lamp does not
light up.
62
LAMP REPLACE-
MENT indicator
and
.)
63
• Take the projector to your nearest Sharp
Authorized LCD Projector Dealer or Service
Center for repair.
The lamp requires
replacement.
• Lamp has been used for
over 1,400 hours.
POWER indicator
The POWER
indicator flashes in
red when the
• The filter cover is open.
• Securely install the filter cover.
• If the POWER indicator flashes even when
the filter cover is securely installed, contact
your nearest Sharp Authorized LCD
Projector Dealer or Service Center for
advice.
projector is on.
• If the TEMPERATURE WARNING indicator lights up, follow the above possible solutions and then wait until the projector has
cooled down completely before turning the power back on. (At least 5 minutes.)
• If the power is turned off and then turned on again, as during a brief rest, the LAMP REPLACEMENT indicator may be
triggered, preventing the power from going on. Should this occur, take the power cord out of the wall outlet and put it back
in again.
Lamp
The lamp in this projector operates for approximately 1,500 cumulative hours, depending on the usage environ-
ment. It is recommended that the lamp be replaced after 1,400 cumulative hours of use or when you notice a
significant deterioration of the picture and color quality. The lamp usage time can be checked with the On-screen
Display. (see page
.)
51
CAUTION
• Intense light hazard. Do not attempt to look into the aperture and lens while the projector is operating.
• As the usage environment can vary significantly, the projector lamp may not operate for 1,500 hours.
Condition
Problem
Possible Solution
The LAMP REPLACEMENT
• Lamp has been used for over 1,400
hours.
• Purchase a replacement lamp unit
(lamp/cage module) of the current
type BQC-XGP25X//1 from your
nearest Sharp Authorised LCD
Projector Dealer or Service Center.
indicator lights up red, and “LAMP”
and “ ” will blink in yellow in the
lower-left corner of the picture.
A significant deterioration of the
picture and color quality occurs.
• Replace the lamp. (See pages
62
and
.) If you wish, you may
63
The power will automatically turn
off and the projector will enter
standby mode.
• Lamp has been used for over 1,500
hours.
have the lamp replaced at your
nearest Sharp Authorised LCD
Projector Dealer or Service Center.
“LAMP” and “ ” will blink in red in
the lower-left corner of the picture,
and the power will turn off.
E-61
XG-P25X/CD (E)-g
61
02.3.19, 7:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Lamp
CAUTION
• Potential hazard of glass particles if lamp ruptures. In case of lamp rupture, contact your nearest
Sharp Authorized LCD Projector Dealer or Service Center for a replacement.
• Do not remove the lamp cage directly after operation of the projector.The lamp may be extremely
hot. Wait at least one hour after the power cord is disconnected to allow the surface of the lamp cage
to fully cool before removing the lamp cage.
It is recommended that the lamp be replaced after approximately 1,400 cumulative hours of use or when you
notice a significant deterioration of the picture and color quality. Carefully change the lamp by following the steps
below.
If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorized LCD Projector
Dealer or Service Center for repair. Purchase a replacement lamp unit (lamp/cage module) of the current type
BQC-XGP25X//1 from your nearest Sharp Authorized LCD Projector Dealer or Service Center. Then carefully change
the lamp by following the instructions below. If you wish, you may have the lamp replaced at your nearest Sharp
Authorized LCD Projector Dealer or Service Center.
IMPORTANT NOTE TO U.S. CUSTOMERS:
The lamp included with this projector is backed by a 90-day parts and labor limited warranty. All service of this
projector under warranty, including lamp replacement, must be obtained through a Sharp Authorized LCD Projector
Dealer or Service Center. For the name of the nearest Sharp Authorized LCD Projector Dealer or Service Center,
please call toll-free: 1-888-GO-SHARP (1-888-467-4277).
U.S.A. ONLY
Caution Concerning the Lamp
• This projector utilizes a pressurized mercury lamp. A loud sound may indicate lamp failure. Lamp failure can
be attributed to numerous sources such as excessive shock, improper cooling, surface scratches or deterioration
of the lamp due to a lapse of usage time. The period of time up to failure largely varies depending on the
individual lamp and/or the condition and the frequency of use. It is important to note that failure can often result
in the bulb cracking.
• When the LAMP REPLACEMENT indicator and on-screen display icon is illuminated or flashes, it is recommended
that the lamp be replaced with a new one immediately, even if the lamp appears to be operating normally.
• Should the lamp break, the glass particles may spread inside the lamp cage or gas contained in the lamp may
be vented into the room from the exhaust vent. Because the gas in this lamp includes mercury, ventilate the
room well if the lamp breaks and avoid all exposure to the released gas. In case of exposure to the gas, consult
with a doctor as soon as possible.
• Should the lamp break, there is also a possibility that glass particles may spread inside of the projector. In such
a case, it is recommended you contact your nearest Sharp Authorized LCD Projector Dealer or Service Center
to remove the damaged lamp and assure safe operation.
Removing and installing the lamp unit
CAUTION
• Be sure to remove the lamp cage by the handle. Be sure not to touch the glass surface of the lamp cage or the inside of
the projector.
• To avoid injury to yourself and damage to the lamp, be sure to carefully follow the steps below.
• Be sure to change the air filter during lamp replacement. The air filter comes packaged with the lamp unit.
Turn off the
power.
Disconnect the
power cord.
Remove the
bottom filter cover.
Remove the
air filter.
1
2
3
4
Press POWER OFF.
Wait until the cooling
fan stops.
Unplug the power cord
from the AC socket.
Turn over the projector.
Press the tab and lift
open the filter cover in
the direction of the
arrow.
Grasp the air filter
between your fingers
and lift it out of the filter
cover.
Tab
E-62
XG-P25X/CD (E)-g
62
02.3.19, 7:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Lamp
Replace the air filter.
Replace the filter
cover.
Remove the lamp cage
cover.
5
6
7
Place the air filter underneath the
tabs on the filter frame.
Insert the tab on the end of the
filter cover into the filter cover
opening and press the filter
cover into position.
Turn over the projector and
loosen the user service screw
that secures the lamp cage
cover. Then slide the cover in
the direction of the arrow.
Tab
User service screw
Remove the lamp
cage.
Attach the lamp cage
cover.
8
9
Insert the new lamp cage. 10
Remove the securing screws
from the lamp cage. Hold the
lamp cage by the handle and
pull it towards you.
Press the lamp cage firmly into
the lamp cage compartment.
Fasten the securing screws.
Slide the lamp cage cover in
the direction of the arrow. Then
tighten the user service screw.
Securing
screw
Securing
screws
User service screw
Resetting the lamp timer
Connect the power
Reset the lamp timer.
1
2
cord.
Plug the power cord into the AC
socket of the projector.
While pressing ƒ, © and
ENTER on the projector, press
POWER ON on the projector.
“LAMP 0000H” is displayed,
indicating that the lamp timer is
reset.
Ł
• Reset the lamp timer only after replacing the lamp.
E-63
XG-P25X/CD (E)-g
63
02.3.19, 7:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Air Filter
• This projector is equipped with two air filters to ensure the optimal operating condition of the projector.
• The air filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used
in a dusty or smoky location.
• Have your nearest Sharp Authorized LCD Projector Dealer or Service Center exchange the filter (PFILD0080CEZZ)
when it is no longer possible to clean it.
Bottom View
Side and Rear View
Air filter (not removable)
Air filter
Cleaning and replacing the bottom air filter
Turn off the power and
disconnect the power
cord.
Remove the bottom
filter cover.
Remove the air filter.
1
2
3
Press POWER OFF. Wait until
the cooling fan stops.
Turn over the projector. Press the
tab and lift open the filter cover
in the direction of the arrow.
Grasp the air filter between your
fingers and lift it out of the filter
cover.
Tab
Replace the filter
cover.
Clean the air filter.
Replace the air filter.
4
5
6
Clean the dust off the air filter
and cover with a vacuum
cleaner extension hose.
Place the air filter underneath
the tabs on the filter frame.
Insert the tab on the end of the
filter cover into the filter cover
opening and press the filter
cover into position.
Tab
• Be sure the filter cover is securely installed. The power will not turn on unless it is correctly installed.
Cleaning the side air filter (not removable)
If dust or dirt has collected inside the air filter, clean the filter with a vacuum cleaner extension hose.
• The side air filter cannot be removed.
E-64
XG-P25X/CD (E)-g
64
02.3.19, 7:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Check
• Keylock level is set to “Level A” or “Level B”, preventing operation of some or all
buttons. (See page .)
Power cannot be turned on or
off using the POWER buttons
(ON/OFF) on the projector.
52
Cannot be operated by
remote control.
• Check to see if the batteries are dead. If they are, replace with new ones. (See page
.)
13
• When the projector is set to slave, use the buttons on the master projector or change the
setting by RS-232C commands from the computer. (See page .)
52
Cannot be operated by all
buttons of the projector and
remote control.
• When using slave setting in combination with Keylock Level B, all the buttons on the
projector and the remote control are disabled. Use the SAPS or RS-232C commands to
release slave and Keylock setting and enable buttons to operate.
Without a computer, you can release slave and Keylock setting by entering the buttons
on the projector as follows.
ON → ENTER → ON → ENTER → ON → ENTER → MENU
However, this operation also releases the password set.
No picture and no sound.
• Projector power cord is not plugged into the wall outlet.
• The bottom filter cover is not securely installed.
• Selected input is wrong. (See page
.)
31
• Cables incorrectly connected to rear panel of the projector. (See pages
–
.)
16 21
• Remote control batteries have run down. (See page
.)
13
Sound is heard but no picture
appears.
• Cables incorrectly connected to rear panel of the projector. (See pages
–
.)
.)
16 21
• “Contrast” and “Bright” adjustments are set to minimum position. (See page
41
• On-screen Display (“BLACK SCREEN”) is turned off and Black Screen function is turned
on, creating a black image. (See page .)
32
Color is faded or poor.
Picture is blurred.
• “Color” and “Tint” adjustments are not correct. (See page
.)
41
• Adjust the focus. (See page
.)
24
• Projection distance is too long or too short to allow for proper focus. (See pages
–
.)
25 29
Picture appears but no sound
is heard.
• Cables incorrectly connected to rear panel of the projector. (See pages
–
.)
16 21
• Volume is set to minimum. (See page
.)
31
No OSD appears.
• OSD Display is set to “Level A” or “Level B”, preventing to display some or all On-screen
Displays. (See page .)
48
An unusual sound is occasion-
ally heard from the cabinet.
• If the picture is normal, the sound is due to cabinet shrinkage caused by temperature
changes. This will not affect operation or performance.
Maintenance indicator lights
up.
• Refer to “Lamp/Maintenance Indicators” on page
.
61
Picture noise appears.
• Adjust the “Phase” setting. (See page
.)
43
• Noise may appear when used with certain computers. Set the NOISE FILTER to ON
using the RS-232C command. (See pages
–
.)
68 70
480P images do not appear.
• Set the resolution mode to 480P. (See page
.)
44
Image is green on INPUT 1 or
2 COMPONENT.
• Change the input signal type. (See page
.)
41
Image is pink (no green) on
INPUT 1, 2 RGB.
E-65
XG-P25X/CD (E)-g
65
02.3.19, 7:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
For SHARP Assistance
If you encounter any problems during setup or operation of this projector, first refer to the “Troubleshooting”
section on page
. If this operation manual does not answer your question, please contact the SHARP Service
65
Department listed below.
U.S.A.
Sharp Electronics Corporation
1-888-GO-SHARP (1-888-467-4277)
Canada
Mexico
Germany
U.K.
Sharp Electronics of Canada Ltd.
(905) 568-7140
Sharp Electronics Corporation Mexico Branch
(525) 716-9000
Sharp Electronics (Europe) GMBH
01805-234675
Sharp Electronics (U.K.) Ltd.
0161-205-2333
Italy
Sharp Electronics (Italy) S.P.A.
(39) 02-89595-1
Australia
Sharp Corporation of Australia Pty.Ltd.
1300-135-022
New Zealand Sharp Corporation of New Zealand
(09) 634-2059, (09) 636-6972
Singapore
Sharp-Roxy Sales (S) Pte. Ltd.
65-226-6556
Hong Kong
Sharp-Roxy (HK) Ltd.
(852) 2410-2623
Malaysia
U.A.E.
Sharp-Roxy Sales & Service Co.
(60) 3-5125678
Sharp Middle East Fze
971-4-81-5311
Thailand
Korea
Sharp Thebnakorn Co. Ltd.
02-236-0170
Sharp Electronics Incorporated of Korea
(82) 2-3660-2002
E-66
XG-P25X/CD (E)-g
66
02.3.19, 7:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Pin Assignments
INPUT 1 RGB and OUTPUT (INPUT 1, 2) Signal Ports: 15-pin Mini D-sub female connector
RGB Input
Analog
1. Video input (red)
2. Video input
(green/sync on green)
3. Video input (blue)
4. Reserve input 1
5. Composite sync
6. Earth (red)
8. Earth (blue)
9. Not connected
10. GND
5
10
15
1
6
11
11. GND
12. Bi-directional data
13. Horizontal sync signal
14. Vertical sync signal
15. Data clock
7. Earth (green/sync on green)
Component Input
Analog
1. PR (CR)
9. Not connected
10. Not connected
11. Not connected
12. Not connected
13. Not connected
14. Not connected
15. Not connected
2. Y
3. PB (CB)
4. Not connected
5. Not connected
6. Earth (PR)
7. Earth (Y)
8. Earth (PB)
RS-232C Port: 9-pin D-sub male connector
Pin No. Signal
Name
I/O
Reference
Not connected
Connected to internal circuit
Connected to internal circuit
Not connected
Connected to internal circuit
Not connected
Connected to internal circuit
Connected to internal circuit
Not connected
1
5
1
2
3
4
5
6
7
8
9
CD
RD
SD
ER
SG
DR
RS
CS
CI
Receive Data
Send Data
Input
Output
Signal Ground
Data Set Ready
Request to Send
Clear to Send
6
9
Output
Input
RS-232C Cable recommended connection: 9-pin D-sub female connector
Pin No. Signal
Pin No. Signal
5
1
1
2
3
4
5
6
7
8
9
CD
RD
SD
ER
SG
DR
RS
CS
CI
1
2
3
4
5
6
7
8
9
CD
RD
SD
ER
SG
DR
RS
CS
CI
9
6
Pin No.
Name
INPUT 3 DVI Port: 29-pin
1
2
T.M.D.S. Data 2
T.M.D.S. Data 2
ם T.M.D.S. Data 2/4 Shield
T.M.D.S. Data 4
*3 T.M.D.S. Data 4
ם *3 DDC Clock
16
17
18
19
20
21
22
23
24
C1
C2
C3
C4
C5
Hot Plug Detect
T.M.D.S. Data 0
T.M.D.S. Data 0
ם T.M.D.S. Data 0/5 Shield
T.M.D.S. Data 5
*3 T.M.D.S. Data 5
ם *3 T.M.D.S. Clock Shield
T.M.D.S. Clock
ם T.M.D.S. Clock
Analog Red
3
4
C1C2
5
6
9
1
816
7
DDC Data
8
Analog Vertical Sync
T.M.D.S. Data 1
T.M.D.S. Data 1
ם T.M.D.S. Data 1/3 Shield
T.M.D.S. Data 3
*3 T.M.D.S. Data 3
ם *3 ם 5 V Power 9
10
11
12
13
14
15
Analog Green
Analog Blue
Analog Horizontal sync
Analog Ground*2
17
24 C3 C4
C5
Ground*1
• *1 Return for
ם 5 V, Hsync. and Vsync. • *2 Analog R, G and B return
• *3 These pins are not used on this equipment.
E-67
XG-P25X/CD (E)-h
67
02.3.19, 7:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
(RS-232C) Specifications and Command Settings
PC control
A computer can be used to control the projector by connecting an RS-232C cable (cross type, sold separately) to
the projector. (See page for connection.)
19
Communication conditions
Set the serial port settings of the computer to match that of the table.
Signal format: Conforms to RS-232C standard.
Baud rate: 9,600 bps
Data length: 8 bits
Parity bit: None
Stop bit: 1 bit
Flow control: None
Basic format
Commands from the computer are sent in the following order: command, parameter, and return code. After the
projector processes the command from the computer, it sends a response code to the computer.
Command format
C1 C2 C3 C4 P1 P2 P3 P4
Command 4-digit Parameter 4-digit
Response code format
Return code (0DH)
Normal response
Return code (0DH)
Problem response (communication error or incorrect command)
Return code (0DH)
O
K
E
R
R
When more than one code is being sent, send each command only after the OK response code for the previous
command from the projector is verified.
• When using the computer control function of the projector, the projector operating status cannot be read to the computer.
Therefore, confirm the status by transmitting the display commands for each adjustment menu and checking the status with
the On-screen Display. If the projector receives a command other than a menu display command, it will execute the com-
mand without displaying the On-screen Display.
• When the projector is in standby mode, send each command more than 1 minute after the previous command.
Commands
EXAMPLE
• When “BRIGHT” of INPUT 1 (RGB 1) image adjustment is set to
מ 10. Computer
Projector
→
←
R
A
B
R
_
מ 1
0
O
K
CONTROL CONTENTS
COMMAND PARAMETER
RETURN
OK OR ERR
CONTROL CONTENTS
BLACK SCREEN ON
COMMAND PARAMETER
RETURN
OK OR ERR
POWER ON
POWER OFF
P
P
V
O W R
O W R
_
_
_
_
_
_
_
*
_
_
_
_
_
_
_
*
*
*
_
*
_
_
*
_
_
*
*
*
*
*
1
0
*
1
0
*
*
*
*
*
I
I
M B
M B
K
K
B
B
B
D
D
K
Z
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
1
0
1
2
3
1
2
0
1
0
1
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
BLACK SCREEN OFF
INPUT 1 (RGB 1)
INPUT 2 (RGB 2)
INPUT 3 (RGB 3)
INPUT 4 (VIDEO 1)
INPUT 5 (VIDEO 2)
INPUT CHECK
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
VOLUME (0 – 60)
O
L
T
T
F
Z
Y
I
A
E
I
R
R
R
V
V
C
R
R
D
G
G
G
E
E
H
E
E
J
MUTE ON
M U
M U
I
MUTE OFF
E
I
LENS FOCUS (
מ 30 – ם 30) LENS ZOOM (
מ 30 – ם 30) KEYSTONE (
מ 127 – ם 127) V-SIZE (
מ 30 – ם 30) DIGITAL SHIFT (
מ 96 – ם 96) L
L
K
V
L
N
N
E
O
O
S
Z
I
I
I
S
N
FREEZE ON
F
F
A
D
S
FREEZE OFF
Z
AUTO SYNC START
S
E-68
XG-P25X/CD (E)-h
68
02.3.19, 7:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
(RS-232C) Specifications and Command Settings
CONTROL CONTENTS
INPUT 1 (RGB 1) RESIZE : NORMAL
INPUT 1 (RGB 1) RESIZE : FULL
COMMAND PARAMETER
RETURN
OK OR ERR
CONTROL CONTENTS
INPUT 1 (RGB 1) SIGNAL TYPE : RGB
INPUT 1 (RGB 1) SIGNAL TYPE : COMPONENT
INPUT 2 (RGB 2) SIGNAL TYPE : RGB
INPUT 2 (RGB 2) SIGNAL TYPE : COMPONENT
INPUT 1 (RGB 1) 2D PROGRESSIVE
INPUT 1 (RGB 1) 3D PROGRESSIVE
INPUT 1 (RGB 1) Film MODE
COMMAND PARAMETER
RETURN
OK OR ERR
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
G
G
G
G
G
G
G
G
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
A
A
A
B
B
B
C
C
C
A
A
A
A
A
B
B
B
B
B
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
R
R
R
R
R
R
R
R
R
V
V
V
V
V
V
V
V
V
V
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
*
*
*
_
_
_
*
*
*
*
*
*
*
_
_
_
*
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
*
*
*
*
_
_
*
*
*
*
*
*
*
*
_
_
*
*
*
*
*
*
*
*
_
_
1
5
3
1
5
3
1
5
3
1
5
3
2
4
1
5
3
2
4
1
2
3
4
1
2
3
4
*
*
*
*
*
*
*
*
0
1
*
*
*
*
*
*
*
*
0
1
*
*
*
*
*
*
*
*
0
1
I
A
A
B
B
A
A
A
B
B
B
C
C
C
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
A
A
A
B
B
B
M
M
M
N
N
A
A
A
A
S
S
S
S
I
I
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
*
*
*
_
_
_
*
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
*
*
*
*
_
_
*
*
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
1
2
1
2
0
1
2
0
1
2
0
1
2
*
*
*
*
*
*
*
*
0
1
*
*
*
*
*
*
*
*
0
1
0
1
2
0
1
2
0
1
2
*
*
*
*
0
1
*
*
1
2
0
1
2
1
0
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
I
I
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
kHz (***. * OR _)
Hz (***. * OR _)
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
INPUT 1 (RGB 1) RESIZE : DOT BY DOT
INPUT 2 (RGB 2) RESIZE : NORMAL
INPUT 2 (RGB 2) RESIZE : FULL
I
I
I
I
R
R
R
R
R
R
R
R
R
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
I
P
P
P
P
P
P
P
P
P
I
INPUT 2 (RGB 2) RESIZE : DOT BY DOT
INPUT 3 (RGB 3) RESIZE : NORMAL
INPUT 3 (RGB 3) RESIZE : FULL
I
I
INPUT 2 (RGB 2) 2D PROGRESSIVE
INPUT 2 (RGB 2) 3D PROGRESSIVE
INPUT 2 (RGB 2) Film MODE
I
INPUT 3 (RGB 3) RESIZE : DOT BY DOT
INPUT 4 (VIDEO 1) RESIZE : NORMAL
INPUT 4 (VIDEO 1) RESIZE : FULL
INPUT 4 (VIDEO 1) RESIZE : BORDER
INPUT 4 (VIDEO 1) RESIZE : STRETCH
INPUT 4 (VIDEO 1) RESIZE : SMART STRETCH
INPUT 5 (VIDEO 2) RESIZE : NORMAL
INPUT 5 (VIDEO 2) RESIZE : FULL
INPUT 5 (VIDEO 2) RESIZE : BORDER
INPUT 5 (VIDEO 2) RESIZE : STRETCH
INPUT 5 (VIDEO 2) RESIZE : SMART STRETCH
RGB GAMMA : STANDARD
I
I
INPUT 3 (RGB 3) 2D PROGRESSIVE
INPUT 3 (RGB 3) 3D PROGRESSIVE
INPUT 3 (RGB 3) Film MODE
I
I
I
INPUT 4 (VIDEO 1) CONTRAST (
מ 30 – ם 30) INPUT 4 (VIDEO 1) BRIGHT (
מ 30 – ם 30) INPUT 4 (VIDEO 1) RED (
מ 30 – ם 30) INPUT 4 (VIDEO 1) BLUE (
מ 30 – ם 30) INPUT 4 (VIDEO 1) COLOR (
מ 30 – ם 30) INPUT 4 (VIDEO 1) TINT (
מ 30 – ם 30) INPUT 4 (VIDEO 1) SHARP (
מ 30 – ם 30) INPUT 4 (VIDEO 1) CLR TEMP (
מ 3 – ם 3) INPUT 4 (VIDEO 1) DISPLAY
P
B
R
B
C
T
S
C
R
R
P
B
R
B
C
T
S
C
R
R
I
R
D
E
O
I
A M R
A M R
A M R
A M R
A M V
A M V
A M V
A M V
H
T
E
E
I
RGB GAMMA : PRESENTATION
RGB GAMMA : CINEMA
RGB GAMMA : CUSTOM
INPUT 4 (VIDEO 1) ADJUSTMENT RESET
INPUT 5 (VIDEO 2) CONTRAST (
מ 30 – ם 30) INPUT 5 (VIDEO 2) BRIGHT (
מ 30 – ם 30) INPUT 5 (VIDEO 2) RED (
מ 30 – ם 30) INPUT 5 (VIDEO 2) BLUE (
מ 30 – ם 30) INPUT 5 (VIDEO 2) COLOR (
מ 30 – ם 30) INPUT 5 (VIDEO 2) TINT (
מ 30 – ם 30) INPUT 5 (VIDEO 2) SHARP (
מ 30 – ם 30) INPUT 5 (VIDEO 2) CLR TEMP (
מ 3 – ם 3) INPUT 5 (VIDEO 2) DISPLAY
VIDEO GAMMA : STANDARD
VIDEO GAMMA : PRESENTATION
VIDEO GAMMA : CINEMA
R
D
E
O
I
VIDEO GAMMA : CUSTOM
INPUT 1 (RGB 1) CONTRAST (
מ 30 – ם 30) INPUT 1 (RGB 1) BRIGHT (
מ 30 – ם 30) INPUT 1 (RGB 1) RED (
מ 30 – ם 30) INPUT 1 (RGB 1) BLUE (
מ 30 – ם 30) INPUT 1 (RGB 1) COLOR (
מ 30 – ם 30) INPUT 1 (RGB 1) TINT (
מ 30 – ם 30) INPUT 1 (RGB 1) SHARP (
מ 30 – ם 30) INPUT 1 (RGB 1) CLR TEMP (
מ 3 – ם 3) INPUT 1 (RGB 1) DISPLAY
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
C
C
P
B
R
B
C
T
I
R
D
E
O
I
H
T
E
E
P
P
P
P
P
P
P
P
P
L
H
P
P
E
E
INPUT 5 (VIDEO 2) ADJUSTMENT RESET
INPUT 4 (VIDEO 1) 2D PROGRESSIVE
INPUT 4 (VIDEO 1) 3D PROGRESSIVE
INPUT 4 (VIDEO 1) Film MODE
S
C
R
R
P
B
R
B
C
T
H
T
E
E
I
I
I
INPUT 1 (RGB 1) ADJUSTMENT RESET
INPUT 2 (RGB 2) CONTRAST (
מ 30 – ם 30) INPUT 2 (RGB 2) BRIGHT (
מ 30 – ם 30) INPUT 2 (RGB 2) RED (
מ 30 – ם 30) INPUT 2 (RGB 2) BLUE (
מ 30 – ם 30) INPUT 2 (RGB 2) COLOR (
מ 30 – ם 30) INPUT 2 (RGB 2) TINT (
מ 30 – ם 30) INPUT 2 (RGB 2) SHARP (
מ 30 – ם 30) INPUT 2 (RGB 2) CLR TEMP (
מ 3 – ם 3) INPUT 2 (RGB 2) DISPLAY
INPUT 5 (VIDEO 2) 2D PROGRESSIVE
INPUT 5 (VIDEO 2) 3D PROGRESSIVE
INPUT 5 (VIDEO 2) Film MODE
I
I
R
D
E
O
I
I
(INPUT 1–5) 2D PROGRESSIVE
I
(INPUT 1–5) 3D PROGRESSIVE
I
I
(INPUT 1–5) Film MODE
I
I
CLOCK (
מ 150 – ם 150) I
C
P
H
V
R
R
S
C
R
R
P
B
R
B
C
T
H
T
E
E
I
PHASE (
מ 60 – ם 60) I
H-POSITION (
מ 150 – ם 150) I
V-POSITION (
מ 60 – ם 60) I
INPUT 2 (RGB 2) ADJUSTMENT RESET
INPUT 3 (RGB 3) CONTRAST (
מ 30 – ם 30) INPUT 3 (RGB 3) BRIGHT (
מ 30 – ם 30) INPUT 3 (RGB 3) RED (
מ 30 – ם 30) INPUT 3 (RGB 3) BLUE (
מ 30 – ם 30) INPUT 3 (RGB 3) COLOR (
מ 30 – ם 30) INPUT 3 (RGB 3) TINT (
מ 30 – ם 30) INPUT 3 (RGB 3) SHARP (
מ 30 – ם 30) INPUT 3 (RGB 3) CLR TEMP (
מ 3 – ם 3) INPUT 3 (RGB 3) DISPLAY
RGB INPUT DISPLAY
I
RGB ADJUSTMENT RESET
I
R
D
E
O
I
SAVE SETTING (1 – 7)
M E M S
M E M L
SELECT SETTING (1 – 7)
RGB HORIZONTAL FREQUENCY CHECK
RGB VERTICAL FREQUENCY CHECK
AUTO SYNC OFF
T
T
A
A
A
I
F
F
A
A
A
R
R
D
D
D
Q
Q
J
C
C
R
R
H
T
E
E
NORMAL AUTO SYNC
J
HIGH SPEED AUTO SYNC
J
AUTO SYNC DISPLAY ON
M A
M A
S
S
INPUT 3 (RGB 3) ADJUSTMENT RESET
AUTO SYNC DISPLAY OFF
I
E-69
XG-P25X/CD (E)-h
69
02.3.19, 7:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
(RS-232C) Specifications and Command Settings
CONTROL CONTENTS
BALANCE (
מ 30 – ם 30) COMMAND PARAMETER
RETURN
OK OR ERR
CONTROL CONTENTS
LAMP USAGE TIME
COMMAND PARAMETER
RETURN
0–9999 (INTEGER)
0:OFF, 1:ON, 2:RETRY,
3:WAITING, 4:LAMP ERROR
OK OR ERR
A
A
A
A
A
A
A
A
A
P
P
P
P
P
3
3
I
A
A
A
A
A
O
O
S
S
I
B
T
L
E
A
E
E
T
T
K
K
P
P
P
P
P
R
R
I
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
_
_
_
_
_
_
1
1
1
1
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
0
1
1
2
1
0
1
2
3
4
0
0
1
1
2
0
1
0
1
2
3
4
5
6
7
1
2
3
4
1
2
3
0
1
0
1
0
1
T
L
T
T
_
_
_
1
TREBLE (
מ 30 – ם 30) OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
LAMP STATUS
T
L
P
S
_
_
_
1
BASS (
מ 30 – ם 30) B
R
R
U
U
P
P
N
N
N
N
N
N
N
AUDIO DISPLAY
PRJ MODE : REVERSE OFF
PRJ MODE : REVERSE ON
PRJ MODE : INVERT OFF
I
M R
M R
E
E
N
N
K
K
K
L
L
L
I
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
1
_
_
_
_
_
_
0
1
0
1
0
1
2
0
1
2
0
1
0
1
0
1
0
1
0
1
1
0
1
2
3
4
5
6
7
8
9
0
1
0
1
1
1
2
AUDIO ADJUSTMENT RESET
FAO
I
OK OR ERR
I
M
M
T
I
OK OR ERR
VAO
PRJ MODE : INVERT ON
I
I
OK OR ERR
SPEAKER ON
STACK SETTING : NORMAL
STACK SETTING : MASTER
STACK SETTING : SLAVE
S
S
S
K
K
K
R
R
R
R
R
R
V
V
V
V
R
A
A
A
Y
Y
Y
S
S
S
S
S
S
S
S
S
S
I
OK OR ERR
SPEAKER OFF
T
OK OR ERR
PICT IN PICT : BOTTOM RIGHT
PICT IN PICT : BOTTOM LEFT
PICT IN PICT : UPPER RIGHT
PICT IN PICT : UPPER LEFT
PICT IN PICT RESET
T
OK OR ERR
I
KEYLOCK LEVEL : NORMAL
KEYLOCK LEVEL : LEVEL A
KEYLOCK LEVEL : LEVEL B
SET INPUTS : INPUT 1 NO USE
SET INPUTS : INPUT 1 USE
SET INPUTS : INPUT 2 NO USE
SET INPUTS : INPUT 2 USE
SET INPUTS : INPUT 3 NO USE
SET INPUTS : INPUT 3 USE
SET INPUTS : INPUT 4 NO USE
SET INPUTS : INPUT 4 USE
SET INPUTS : INPUT 5 NO USE
SET INPUTS : INPUT 5 USE
ID NO. CHECK
E
OK OR ERR
I
E
OK OR ERR
I
E
OK OR ERR
I
A
A
B
B
C
C
A
A
B
B
D
OK OR ERR
VIDEO DNR OFF
D
D
I
OK OR ERR
VIDEO DNR ON
I
OK OR ERR
OSD DISPLAY ON
M D
M D
M D
M B
M B
I
OK OR ERR
OSD DISPLAY OFF (LEVEL A)
OSD DISPLAY OFF (LEVEL B)
BLACK SCREEN DISPLAY ON
BLACK SCREEN DISPLAY OFF
VIDEO SYSTEM SELECTION : AUTO
VIDEO SYSTEM SELECTION : PAL
VIDEO SYSTEM SELECTION : SECAM
VIDEO SYSTEM SELECTION : NTSC4.43
VIDEO SYSTEM SELECTION : NTSC3.58
VIDEO SYSTEM SELECTION : PAL_M
VIDEO SYSTEM SELECTION : PAL_N
BACKGROUND SELECTION : SHARP
BACKGROUND SELECTION : CUSTOM
BACKGROUND SELECTION : BLUE
BACKGROUND SELECTION : NONE
STARTUP IMAGE SELECTION : SHARP
STARTUP IMAGE SELECTION : CUSTOM
STARTUP IMAGE SELECTION : NONE
POWER SAVE MODE : STANDARD
POWER SAVE MODE : LOW POWER
MONITOR OUT OFF
I
I
I
OK OR ERR
I
I
I
OK OR ERR
I
O
O
Y
Y
Y
Y
Y
Y
Y
G
G
G
G
I
I
OK OR ERR
I
I
OK OR ERR
M E
M E
M E
M E
M E
M E
M E
S
S
S
S
S
S
S
I
OK OR ERR
I
OK OR ERR
D
A
A
A
A
A
A
A
A
A
A
A
D
L
L
D
A
A
001–250
LANGUAGE SELECTION : ENGLISH
LANGUAGE SELECTION : DEUTSCH
LANGUAGE SELECTION : ESPAÑOL
LANGUAGE SELECTION : NEDERLANDS
LANGUAGE SELECTION : FRANÇAIS
LANGUAGE SELECTION : ITALIANO
LANGUAGE SELECTION : SVENSKA
LANGUAGE SELECTION :
M E
M E
M E
M E
M E
M E
M E
M E
M E
M E
M E
M N
L
L
L
L
L
L
L
L
L
L
L
R
I
OK OR ERR
OK OR ERR
OK OR ERR
OK OR ERR
I
I
M B
M B
M B
M B
M S
M S
M S
OK OR ERR
OK OR ERR
I
OK OR ERR
I
OK OR ERR
I
LANGUAGE SELECTION : PORTUGUÊS
LANGUAGE SELECTION :
OK OR ERR
I
I
OK OR ERR
I
I
LANGUAGE SELECTION :
OK OR ERR
T
T
H M D
H M D
MODEL NAME CHECK
MODEL NAME
OK OR ERR
NOISE FILTER OFF
N
N
S
P
P
F
F
N
J
M O
M O
U
U
T
T
NOISE FILTER ON *2
I
OK OR ERR
MONITOR OUT ON
SERIAL NO. CHECK *3
R
N
N
SERIAL NO.
OK OR ERR
AUTO POWER OFF : NO USE
AUTO POWER OFF : USE
A
A
P
P
O W _
O W _
PROJECTOR NAME SETTING *4
PROJECTOR NAME CHECK
J
PROJECTOR NAME
• If an underbar (_) appears in the parameter column, enter a space. If an asterisk (*) appears, enter a value in the range
indicated in brackets under CONTROL CONTENTS.
•
•
•
•
*1 FINE SYNC can only be set in the displayed RGB mode.
*2 Noise may appear when used with certain computers. Set the NOISE FILTER to ON using the RS-232C command.
*3 SERIAL NO. CHECK command is used to read out the 12 digits of serial No..
*4 After OK is returned, enter PROJECTOR NAME, up to 12-character memory. The PROJECTOR NAME in memory can then
be output (confirmed).
E-70
XG-P25X/CD (E)-h
70
02.3.19, 7:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Wired Remote Control Terminal Specifications
Specifications of wired remote control input
• ø3.5 mm minijack
• External:
ם 5 V (1 A) • Internal: GND
Function and transmission codes
EXTERNAL
CODE
EXTERNAL
CODE
SYSTEM CODE
DATA CODE
SYSTEM CODE
DATA CODE
CONTROL
ITEM
CONTROL
ITEM
C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15
C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15
ON
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
0
1
1
1
0
1
1
0
1
1
0
0
1
0
1
0
1
1
0
0
0
1
1
1
1
1
1
0
0
1
1
0
1
1
0
0
0
0
0
0
1
1
0
1
1
1
0
1
1
1
1
1
0
0
0
1
1
1
0
1
0
0
0
0
0
0
0
1
0
0
0
0
1
1
0
0
0
0
1
0
1
1
1
1
0
0
0
1
0
0
0
1
1
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
Enlarge
ם Enlarge
מ AUTO SYNC
∂
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
0
0
1
0
1
0
1
0
1
0
1
0
0
1
0
0
0
1
0
0
1
0
1
1
1
1
1
1
1
0
1
0
0
0
0
0
0
0
0
1
1
1
1
0
0
1
1
1
1
1
1
1
1
0
0
0
0
0
1
1
1
1
1
1
0
1
0
0
1
1
1
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
1
0
0
1
1
1
1
1
1
1
1
1
1
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
0
1
1
0
1
0
1
1
1
0
0
OFF
VOLUME
ם VOLUME
מ MUTE
ƒ
MENU
ß
LENS
©
BLACK SCREEN
ENTER
GAMMA
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
RESIZE
UNDO
Freeze
Break Timer
Wired remote control function code
LSB
• To operate the mouse, left-click and right-click functions
through the wired remote control input, connect the cable
from the WIRED REMOTE control input terminal on the
projector to the remote control. The codes for these functions
are complex and are, therefore, not listed here.
MSB
C13 C14 C15
C1
1
System Code
C5
0
C6
*
Data Code
0
1
1
*
*
*
*
*
*
*
1
0
• System codes C1 to C5 are fixed at “10110”.
• Codes C14 and C15 are reverse confirmation bits, with “10”
indicating “Front” and “01” indicating “Rear”.
Sharp remote control signal format
Transmission format: 15-bit format
D
D
D
D
D
D
D
D
D
D
D
D
D
67.5 ms
67.5 ms
Wave form of output signal: Output using Pulse Position Modulation
t
T
1
T0
26.4 µs
“1”
“0”
“0”
“0”
“0”
“1”
“0”
t
D
• t
ס 264 µs • Pulse carrier frequency
ס 455/12 kHz • Duty ratio
ס 1:1 • T0
ס 1.05 ms • T1
ס 2.10 ms Transmission control code
Example of Reverse D to
15 bit
D
D
C1
C2
C3
C4
C5
C6
C7
C8
C9
0
C10 C11 C12 C13 C14 C15
C1
C2
C3
C4
C5
C6
C7
C8
C9
C10 C11 C12 C13 C14 C15
1
0
1
1
0
1
0
0
0
0
0
0
1
0
Data
Data
Deter-
System Address
Function Key Data Bit
Mask
Expansion
C1
1
C2
0
C3
1
C4
1
C5
0
C6
0
C7
1
C8
1
C9
1
C10 C11 C12 C13 C14 C15
mination
1
1
1
1
0
1
D to D Common Data Bit
Reverse in D
E-71
XG-P25X/CD (E)-h
71
02.3.19, 7:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Compatibility Chart
Computer
Horizontal Frequency: 15–126 kHz / Vertical Frequency: 43–200 Hz / Pixel Clock: 12–230 MHz
Compatible with sync on green and composite sync signals
UXGA and SXGA compatible in advanced intelligent compression or intelligent compression
AICS (Advanced Intelligent Compression and Expansion System) resizing technology
PC/
MAC/
WS
Horizontal
Vertical
PC/
MAC/
WS
Horizontal
Vertical
VESA
Standard
DVI
Support
VESA
Standard
DVI
Support
Frequency Frequency
Frequency Frequency
Resolution
Display
Resolution
Display
(kHz)
27.0
31.5
37.9
27.0
(Hz)
60
70
85
60
(kHz)
54.3
64.0
64.1
67.5
75.7
77.3
90.2
54.8
65.9
67.4
64.0
(Hz)
60
70
72
75
80
85
100
60
72
74
60
640
ן 350 720
ן 350 1,152
ן 864 31.5
27.0
31.5
37.9
27.0
31.5
37.9
26.2
31.5
34.7
37.9
37.5
43.3
47.9
53.0
61.8
78.5
80.9
100.4
31.4
35.1
37.9
44.5
48.1
46.9
53.7
56.8
64.0
77.2
98.3
102.1
125.6
35.5
40.3
48.4
56.5
58.1
60.0
68.7
73.5
77.2
80.6
98.8
113.2
70
60
640
ן 400 70
85
SXGA
60
1,152
ן 882 Advanced
Intelligent
Compression
720
ן 400 70
85
50
74.6
78.1
80.0
91.1
108.4
64.0
74.7
70
74
PC
VGA
60
1,280
ן 1,024 75
70
72
85
75
100
60
85
SXGA+ 1,400
ן 1,050 640
ן 480 90
52
Upscale
100
120
150
160
200
50
75.0
81.3
87.5
60
65
70
UXGA 1,600
ן 1,200 Intelligent
Compression
90.1
93.8
72
75
85
PC
106.3
56
PC/
MAC 13"
Upscale
True
VGA
640
ן 480 34.9
67
60
70
48.4
60.0
60
75
PC/
MAC 19"
XGA 1,024
ן 768 72
Advanced
Intelligent
Compression
75
PC/
MAC 21"
SXGA 1,280
ן 1,024 80.0
75
SVGA 800
ן 600 85
46.8
49.6
75
75
90
MAC 16" SVGA 832
ן 624 Upscale
100
120
150
160
200
43
MAC 21" SXGA 1,152
ן 870 68.5
78.1
75
72
HP (WS)
PC (WS)
WS
1,280
ן 1,024 60.0
85.9
53.5
76.8
60.9
71.9
60
85
50
72
66
76
1,280
ן 960 Advanced
Intelligent
Compression
SXGA
SGI (WS)
SUN (WS)
1,280
ן 1,024 50
60
1,152
ן 900 70
72
75
XGA 1,024
ן 768 85
90
True
96
100
120
140
• This projector may not be able to display images from notebook computers in simultaneous (CRT/LCD) mode. Should this occur, turn off
the LCD display on the notebook computer and output the display data in “CRT only” mode. Details on how to change display modes can
be found in your notebook computer’s operation manual.
• This projector can receive 640
ן 350 VESA format VGA signals, however, “640 ן 400” will appear on the screen. • When receiving 1,600
ן 1,200 VESA format UXGA signals, sampling occurs and the image is displayed with 1,024 lines, causing part of the image to be blocked.
DTV
Signal
480
480P
580
Horizontal Frequency (kHz) Vertical Frequency (Hz)
I
15.7
31.5
15.6
31.3
45.0
33.8
33.8
60
60
50
50
60
60
60
I
580P
720P
1035I
1080I
E-72
XG-P25X/CD (E)-h
72
02.3.19, 7:14 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions
Rear View
Side View
Side View
Top View
6 3/32 (155)
1 3/64 (26.5)
12 9/16 (319)
9/64 (3.5)
29/32 (23)
Front View
1 11/32 (34)
(248)
9 3
/4
3 31/64 (88.5) 2 15/16 (74.5)
Bottom View
Units: inches (mm)
13/16 (20.27)
E-73
XG-P25X/CD (E)-h
73
02.3.19, 7:14 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Product type LCD Projector
Model XG-P25X
Video system PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43
DTV 480I/480P/580I/580P/720P/1035I/1080I
Display method LCD panel
ן 3, RGB optical shutter method LCD panel Panel size: 1.3Љ (33mm) (20.0 [H]
ן 26.6 [W] mm) Display method: Translucent TN liquid crystal panel
Drive method: TFT (Thin Film Transistor) Active Matrix panel
No. of dots: 786,432 dots (1,024 [H]
ן 768 [V]) Standard Lens 1–1.3
ן zoom lens, F1.7–2.4, f = 49.2–63.8 mm Projection lamp AC 270 W lamp
Video input signal RCA Connector (INPUT 4): VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
terminated
RCA Connector: AUDIO, 0.5 Vrms more than 22 kΩ (stereo)
S-video input signal 4-pin Mini DIN connector (INPUT 5)
Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
Component input signal BNC Connector (INPUT 2)
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
PB: 0.7 Vp-p, 75 Ω terminated
PR: 0.7 Vp-p, 75 Ω terminated
Horizontal resolution 520 TV lines (S-video input), 750 TV lines (DTV 720P input, STRETCH mode)
RGB input signal 15-PIN MINI D-SUB CONNECTOR (INPUT 1), 5 BNC CONNECTOR (INPUT 2):
RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive,
75 Ω terminated
DVI CONNECTOR (29-PIN) (INPUT 3), RGB (DIGITAL), 250–1,000 mV, 50 Ω
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) or composite sync (Apple only)
VERTICAL SYNC. SIGNAL: Same as above
STEREO MINIJACK: AUDIO, 0.5 Vrms, more than 22 kΩ (stereo)
Pixel clock 12–230 MHz
Vertical frequency 43–200 Hz
Horizontal frequency 15–126 kHz
Computer control signal 9-pin D-sub connector (RS-232C Input Port/Output Port)
Speaker system 1 49⁄64Љ (4.5 cm) round
ן 2 2 W
ם 2 W (stereo) Rated voltage AC 100–240 V
Input current 3.9 A
Rated frequency 50/60 Hz
Power consumption 380 W
Heat dissipation 1,430 BTU/hour
Operating temperature 41°F to 104°F (
ם 5°C to ם 40°C) Storage temperature
מ 4°F to 140°F (מ 20°C to ם 60°C) Cabinet Plastic
Dimensions (approx.) 12 9⁄16Љ (W)
ן 6 3⁄32Љ (H) ן 16 21⁄32Љ (D) (319.0 ן 155.0 ן 423.0 mm) (main body only) 12 11⁄32Љ (W)
ן 7 27⁄64Љ (H) ן 17 17⁄32Љ (D) (322.5 ן 188.5 ן 445.0 mm) (including standard lens, adjustment feet and projecting parts)
Weight (approx.) 21.4 lbs. (9.7 kg)
Supplied accessories Remote control, Two R-6 batteries, Power cord, RGB cable (9Ј 10Љ, 3 m), Computer audio
cable (9Ј 10Љ, 3 m), Three BNC-RCA adaptors, Extra air filter, Lens cap, CD-ROM, LCD
projector operation manual, Quick reference guides, ID number seal
Replacement parts Lamp unit (Lamp/cage module) (BQC-XGP25X//1), Remote control (RRMCGA048WJSA),
Two R-6 batteries (“AA” size, UM/SUM-3, HP-7 or similar), Power cord for U.S., Canada
etc. (QACCDA010WJPZ), Power cord for Europe, except U.K. (QACCV4002CEZZ), Power
cord for U.K., Hong Kong and Singapore (QACCB5024CENA), Power cord for Australia,
New Zealand and Oceania (QACCL3022CEZZ), RGB cable (QCNWGA012WJPZ),
Computer audio cable (QCNWGA013WJPZ), BNC-RCA adaptors (QPLGJ0107GEZZ), Air
filter (PFILD0080CEZZ), Lens cap (PCAPH1056CESA), CD-ROM (UDSKAA004WJZZ,
UDSKAA005WJZZ), LCD projector operation manual (TINS-A133WJZZ), Quick reference
guides, Sharp Advanced Presentation Software installation guide (TINS-A139WJZZ), ID
number seal (TLABZ0781CEZZ)
This SHARP projector uses LCD (Liquid Crystal Display) panels. These
very sophisticated panels contain 786,432 pixels (
ן RGB) TFTs (Thin Film Transistors). As with any high technology electronic equipment
such as large screen TVs, video systems and video cameras, there
are certain acceptable tolerances that the equipment must conform
to.
This unit has some inactive TFTs within acceptable tolerances which
may result in illuminated or inactive dots on the picture screen. This
will not affect the picture quality or the life expectancy of the unit.
Specifications are subject to change without notice.
E-74
XG-P25X/CD (E)-h
74
02.3.19, 7:14 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Aspect ratio
Width and height ratio of an image. The normal aspect ratio of a computer and video image is 4:3. There are also wide images with an aspect ratio of 16:9 and
21:9.
Auto Sync
Optimizes projected computer images by automatically adjusting certain characteristics.
Background
Initial setting image projected when no signal is being input.
Border
Projects a 4:3 image fully within a 16:9 screen by keeping the aspect ratio at 4:3.
Clock
Clock adjustment is used to adjust vertical noise when clock level is incorrect.
CLR Temp (Color temperature)
Function that can be used to adjust the color temperature to suit the type of image input to the projector. Decrease the color temperature to create warmer,
reddish images for natural flesh tones, or increase to create cooler, bluish images for a brighter picture.
Composite sync
Signal combining horizontal and vertical sync pulses.
Digital shift
Shifts image up or down easily by ∂/ƒ buttons when RESIZE mode of input image is BORDER, STRETCH or SMART STRETCH of COMPUTER (except for
SXGA and UXGA), VIDEO and DTV inputs.
DNR (Digital Noise Reduction)
Provides high quality images with minimal dot crawl and cross color noise.
Dot by dot
Mode that projects images in their native resolution.
DVI
Digital Visual Interface that supports both digital and analog displays.
GAMMA
Image quality enhancement function that offers a richer image by brightening the darker portions of the image without altering the brightness of the brighter
portions. You can select four different modes : STANDARD, PRESENTATION, CINEMA and CUSTOM.
Intelligent compression and expansion
High quality resizing of lower and higher resolution images to fit the projector’s native resolution.
Intelligent digital keystone correction
Function to digitally correct a distorted image when the projector is set up at an angle, smooths out jaggies on keystone images and compresses the image not
only horizontally but vertically keeping the 4:3 aspect ratio, and at the same time, calculates the aspect ratio automatically adjusting to the lens shift width.
Keylock level
Mode that can lock the operation of projector buttons to prevent mischief.
Lens shift
The lens can be easily raised and lowered to minimize or eliminate “Keystone” type effect.
Magnification (Enlarge)
Digitally zooms in on a portion of an image.
Phase
Phase shift is a timing shift between isomorphic signals with the same resolution. When phase level is incorrect, the projected image typically displays horizontal
flicker.
Picture in Picture
Allows you to add video images onto a data screen image, providing you with even more effective presentations.
Progressive Mode
The progressive display projects a smoother video image. You can select three different modes : 2D Progressive, 3D Progressive and Film Mode.
RESIZE
Allows you to modify or customize the picture display mode to enhance the input image. You can select six different modes: NORMAL, FULL, DOT BY DOT,
BORDER, STRETCH and SMART STRETCH.
RS-232C
Function to control the projector from the computer by using the RS-232C ports on the projector and computer.
Set Inputs
Function to limit inputs. For example, when setting Input 2 to “OFF”, the input is switchable only between Input 1 and Input 3, skipping Input 2.
Smart Stretch
Projects the image fully in a 16:9 screen by enlarging only the surrounding areas while keeping the aspect ratio in the middle part of the image at 4:3.
Stack Setting
Prevents trouble with adjustment and operation when stack projecting. When setting two projectors, one to master and the other to slave, the slave follows the
master’s operation.
Status function
Displays the settings of each adjustment item.
Stretch
Mode that stretches the 4:3 image horizontally to display it fully on a 16:9 screen.
Sync on green
Video signal mode of a computer which overlaps horizontal and vertical sync signal to green color signal pin.
E-75
XG-P25X/CD (E)-h
75
02.3.19, 7:14 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
N
AC socket........................................................................
Adjusting the Picture .......................................................
Adjustment Feet ..............................................................
Air filter ............................................................................
Aspect ratio .....................................................................
Audio ...............................................................................
Audio cable .....................................................................
AUDIO INPUT terminal ...................................................
AUDIO OUTPUT terminal................................................
Auto sync adjustment .....................................................
AUTO SYNC button.........................................................
Network Function ............................................................
16
41
23
64
35
46
21
17
21
45
34
57
O
On-screen display...........................................................
On-screen display Language .........................................
OUTPUT port ..................................................................
48
56
50
P
Password ........................................................................
PDF .................................................................................
Phase ..............................................................................
Picture in Picture .............................................................
POWER buttons ..............................................................
Power cord ......................................................................
POWER indicator ............................................................
Power Save .....................................................................
Progressive Mode ...........................................................
55
11
43
47
22
16
16
50
42
B
Background ....................................................................
BLACK SCREEN button ..................................................
BNC-RCA adaptors.........................................................
BORDER .........................................................................
BREAK TIMER button......................................................
49
32
21
35
34
R
Rear projection................................................................
RESIZE button.................................................................
RGB cable.......................................................................
RS-232C port ..................................................................
30
35
17
19
C
Carrying handle ..............................................................
Ceiling-mount ..................................................................
Ceiling+Rear ...................................................................
Clock ...............................................................................
CLR Temp (Color Temperature) ......................................
6
30
51
43
41
S
Save Setting ....................................................................
Select Setting ..................................................................
Set ID No.........................................................................
Set Inputs ........................................................................
Speaker...........................................................................
Stack Setting ...................................................................
Startup image .................................................................
Status function ................................................................
S-VIDEO INPUT terminal.................................................
Sync ................................................................................
Sync on green .................................................................
43
43
54
53
46
52
49
56
20
45
67
D
Digital shift ......................................................................
DNR (Digital Noise Reduction) .......................................
DOT BY DOT ...................................................................
DVI INPUT port (INPUT 3)...............................................
24
47
35
19
E
Economy Mode ...............................................................
ENLARGE buttons...........................................................
ENTER button..................................................................
Exhaust vent....................................................................
Extra air filter ...................................................................
50
33
38
5
T
15
TEMPERATURE WARNING indicator ..............................
Transmission Speed (RS-232C) ......................................
61
53
F
FAO .................................................................................
FREEZE button ................................................................
46
32
U
UNDO button ..................................................................
38
G
V
GAMMA button ...............................................................
GUI (Graphical User Interface).......................................
37
38
VAO .................................................................................
VIDEO INPUT terminal ....................................................
Video System ..................................................................
Videowall .........................................................................
VOLUME buttons ............................................................
46
20
48
60
31
I
INPUT buttons.................................................................
INPUT port ......................................................................
31
17
K
W
Keylock Levels ................................................................
Keystone correction ........................................................
Wired RC jack .................................................................
WIRED REMOTE control input terminal ..........................
52
24
14
14
L
No.
LAMP REPLACEMENT indicator .....................................
LENS button ....................................................................
Lens shift .........................................................................
1.2.3 button .....................................................................
4.5 button ........................................................................
61
24
23
31
31
M
MENU button...................................................................
Monitor Out/RS-232C Off Function .................................
MUTE button ...................................................................
38
50
31
E-76
XG-P25X/CD (E)-h
76
02.3.19, 7:15 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
SHARP CORPORATION
XG-P25X/CD (E)-h
77
02.3.19, 7:15 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|