Projector Instructions For SharpNV4
Step One:
The Sharp NV4 should contain 2 basic cords. Make sure all the cords are in the bag.
Cord #1: Plugs
into the projector
and the wall.
Cord #1:
Input 1 = RGB1
Cord #2: The second cord
plugs into the laptop and to
the projector (RGB1= port 1).
Cord #2
Plug to
Projector
Step Two:
Turn on the projector on first and then the laptop.
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
“F3”
“Fn”
Step Six:
If you are still having problems call Marti at x5289, Lowell at x7679, Sue at x5189.
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
|