Sharp PDAs Smartphones EL 6930 User Manual

Setting/Changing the daily alarm time  
5. Setting daylight saving time  
(DST: summer time)  
CLOCK  
CLOCK  
1. Press  
once or twice to display Home  
ELECTRONIC ORGANIZER  
clock (with “ ”).  
1. Press  
once or twice to display Home  
ALARM  
2. Press  
to  
ALARM  
or World clock.  
display the daily  
alarm screen.  
(The display differs  
DST  
2. Press  
.
A 1 2 – 0 0  
“#” is displayed. The time is set one hour  
DST  
ahead. To clear DST, press  
to clear “#”.  
between the 12-hour and 24-hour clock.)  
The time is set one hour behind.  
Notes  
• DST can be set independently in either Home or  
World clock.  
• When DST is set for one world city, it is used  
SHIFT SET  
3. Press  
.
EL-6930  
4. Enter the time.  
ENTER  
5. Press  
.
OPERATION MANUAL  
• The daily alarm time is set.  
Turning the alarms on and off  
An alarm sounds only when the respective symbol  
NOTICE  
SHARP strongly recommends that separate  
for all cities displayed in World clock.  
SHARP assumes no responsibility, directly or  
indirectly, for financial losses or claims from third  
persons resulting from the use of this product  
and any of its functions, such as stolen credit  
card numbers, loss or alteration of stored data,  
etc.  
permanent written records be kept of all  
important data. Data may be lost or altered in  
virtually any electronic memory product under  
certain circumstances. Therefore, SHARP  
assumes no responsibility for data lost or  
otherwise rendered unusable whether as a result  
of improper use, repairs, defects, battery  
replacement, use after the specified battery life  
has expired, or any other cause.  
(
,
, or  
) is turned on.  
6. Setting alarms  
The Organizer has three kinds of alarms:  
1. Daily alarm ........ beeps every day at the alarm  
time (for one minute), when  
CLOCK  
Display Home clock (press  
and press  
screen.  
Each time you press  
screen is displayed, the combination of symbols  
switches.  
Note  
once or twice)  
ALARM  
to display the daily alarm  
The information provided in this manual is  
subject to change without notice.  
ALARM  
while the daily alarm  
” is turned on.  
2. Hourly alarm ...... beeps every hour when  
minutes reach “00”, when  
3. Schedule alarm .. beeps at the time for all the  
” is turned on.  
• Alarms sound even when the Organizer is  
turned off.  
Part Names  
schedule entries (for one  
minute), when “  
” is  
turned on. (Refer to  
“Schedule Mode”.)  
Press any key to stop the alarm beeping.  
1
2
3
4
Telephone Mode  
6
Telephone mode is composed of two directories 6. Enter the phone  
5
NUMBER?  
of storage memory. Pressing TEL toggles  
between “1” and “2” on the display.  
Use these files for convenience, e.g. business  
and private files.  
A telephone entry consists of name, address,  
E-mail address, web address (URL) and number  
fields.  
number, and then the  
fax number if needed,  
e.g.  
2 3 4 5 6 7 8 9 0  
3 4 5 6 7 8 9 1  
_
012-3456-7890  
q Power ON/OFF key  
w Cursor keys  
e Search keys  
r Mode keys  
t RESET switch  
• Orange colored functions are operated by  
SPACE SPACE SPACE  
F
3456-7891, and  
SHIFT  
pressing  
(“SHIFT” is turned on) and the  
press ENTER  
.
appropriate keys.  
• “STORED!” appears briefly, then the Telephone  
mode screen is displayed. The telephone entry  
is now stored.  
• In this manual, only the display symbols  
necessary for explanation of this product are  
shown.  
Storing telephone entries  
y TRANSLATOR key  
1. Press TEL once or  
twice to display the  
Number of  
characters  
Allowable  
characters  
Field  
NAME?  
The following notations are used for  
key operations.  
Telephone mode  
screen.  
2. Enter the name, e.g. SMITH  
36 characters  
or under  
The 1st line:  
Name, address,  
E-mail address  
and web address  
(URL)  
Alphabetic letters,  
numbers, symbols,  
“+ – × ÷ .”, space  
: Clear memory  
(in Calculator mode)  
: Letter “U”  
: Turn the touch tone on  
and off  
: Letter “V”  
CM  
SHIFT  
V
SPACE  
ROBERT,  
U
and press ENTER  
3. Enter the address, e.g. 18  
.
SPACE  
EAST  
Numbers, space, –,  
F (Fax), P (Pager)  
The second and  
the third lines:  
Phone number  
SPACE  
ROAD, and press ENTER  
.
4. Enter the E-mail  
address, e.g.  
Using the Organizer for the First Time  
p
_
h a r s e c . c o m  
Notes  
SMBL  
SROB  
Be sure to perform the following operations  
before using the Organizer for the first time.  
1. Remove the isolating film that is affixed to the  
battery holder on the back of the unit.  
2. Press the RESET switch with a ball-point pen  
or similar object.  
NOTES  
• The symbol “NAME”, “ADDRESS”, “E-mail”, or  
“URL” is turned on while entering in each field.  
• To skip entry of an address, E-mail address,  
web address (URL), or number, press ENTER  
when “ADDRESS?”, “E-MAIL?”, “URL?”, or  
“NUMBER?” is displayed. However, entering a  
person’s name cannot be skipped.  
(to enter “ ”)  
@
• If the Organizer is subjected to strong,  
extraneous electrical noises or shocks during  
use, an abnormal condition may occur in which  
no keys (including ON ) will respond. Press the  
RESET switch and press  
SHARPSEC.COM, and press ENTER  
• The E-mail address is automatically entered  
in small letters.  
5. Enter the web address (URL), e.g.  
.
OFF  
SHIFT ENTER  
to  
WWW.SHARPUSA.COM, and press ENTER  
.
“RESET?” is displayed.  
delete all the memory contents.  
• To minimize battery consumption, the  
SHIFT ENTER  
3. Press  
to initialize the Organizer.  
After “RESET!” is displayed, Home clock is  
displayed. (See “Clock Mode”.) All memory  
contents are deleted.  
Organizer is designed to automatically turn off  
when no key has been pressed for  
approximately seven minutes.  
Schedule Mode  
• The key touch tone is turned on and off by  
ENTER  
Schedule mode is used for storing schedule  
details (36 characters or under), date and time  
(year, month, day, hour, and minute). In the first  
line the same characters are allowable as in  
Telephone mode.  
4. Press  
Notes  
to store in the memory.  
pressing SHIFT  
on, “ ” will appear.  
. When the tone is turned  
• Schedules for the following dates can be stored:  
January 1901 to December 2098.  
• If an attempt is made to store an entry without a  
date or time, or with an invalid date or time,  
“ERROR!” appears briefly. Enter the correct  
ENTER  
Changing the Guidance Language  
Pressing  
toggles between  
SCHEDULE/MEMO  
Schedule and Memo mode.  
Guidance messages can be displayed in seven  
To change the language, press SHIFT LANGUAGE  
date and time and press  
.
PREV  
NEXT  
languages – English, German, Spanish, French,  
Italian, Dutch, and Portuguese. After initializing  
the Organizer, the default setting is English.  
followed by  
or  
to select the  
1. Storing schedule entries  
ENTER  
desired language, then press  
.
2. Alarm for Schedule mode  
When the schedule alarm (“  
1. Press  
SCHEDULE?  
”) is turned on, it  
SCHEDULE/MEMO  
once or twice to  
display the Schedule  
mode screen.  
2. Enter the details and press  
3. Enter the date and time.  
is set for all the schedule entries. Beeping sounds  
for one minute when the time for a schedule entry  
is reached. Press any key to stop the alarm. The  
schedule alarm cannot be set for an individual  
entry.  
Entering Characters  
ENTER  
.
• Alphanumeric letters, symbols, and “+ – × ÷ .”  
can be entered into the dot display area (the  
first line).  
Making corrections  
Move the cursor to the character to be corrected.  
Enter the correct character to replace the previous  
one.  
• The types of date and time are the same as  
the types set for the clock.  
• To enter a single-digit date or time, enter “0”  
and the digit (e.g. “O2”).  
Numbers and some characters (only space,  
–, and F and P in Telephone mode) can be  
entered into the number display area (the  
second and the third lines).  
Cursor  
The cursor (_) indicates the position for entering a  
character. Move the cursor with the cursor keys  
• Basically letters are entered in capital letters  
(“CAPS” is turned on). To enter small letters,  
press CAPS to turn “CAPS” off.  
Memo Mode  
(
).  
Inserting characters  
Notes or other pieces of information that are not  
appropriate for Telephone or Schedule mode can  
be entered for convenience.  
In the first line the same characters are allowable  
as in Telephone mode. In the second and the third  
lines you can enter numbers, –, and space. (36  
characters or under can be entered in each line.)  
2. Enter the memo item  
and numbers.  
INS  
Each time  
is pressed, a space is inserted at  
Entering symbols and letters with an accent  
mark  
• To enter a symbol, press SMBL repeatedly until  
the desired symbol appears:  
UNION BANK  
0 1  
the cursor position to allow you to enter a  
character.  
SPACE  
E.g. UNION  
_
2 7 2 0 0 1 1 2 2 3  
ENTER  
BANK  
Deleting characters  
01  
DEL  
Press  
to delete the character at the cursor  
¡¿æµ¢  
272-0011223  
@#$£¥ ( )~’: /\_&<>ß!?  
position.  
ENTER  
3. Press  
to store in the memory.  
• To enter a letter with an accent mark, press  
SHIFT SHIFT to turn “SHIFT LOCK” on, and  
press the appropriate key repeatedly. (Refer to  
the “QUICK REFERENCE GUIDE” inside the  
cover.)  
C•CE  
Press  
to clear all the characters that you  
have entered and not stored yet.  
Storing memo entries  
1. Press  
MEMO?  
SCHEDULE/MEMO  
once or twice to  
display the Memo  
mode screen.  
• To turn “SHIFT LOCK” off, press SHIFT again.  
Clock Mode  
Notes for storing and recalling entries  
Home clock  
Notes  
• To enter a single-digit date or time, enter “0”  
and the digit (e.g. “02”).  
E-MAIL  
Home city (with “ ”)  
Day of the week  
• When the memory is full, “MEMORY FULL!”  
appears briefly, and the entry cannot be stored.  
• When the symbol “ ” or “ ” is turned on,  
• Pressing  
displays the E-mail address  
on the first line directly.  
• If you enter an invalid date or time, “ERROR!”  
appears briefly. Enter the correct date and time  
ENTER  
E-MAIL  
Pressing  
(
WWW ) again displays the  
NYC  
SUN  
Date  
Time  
1 1 2 0 0 6  
more information exists. Press or  
to  
web address (URL) on the first line. Each time  
and press  
.
A 1 2 0 0 0 0  
E-MAIL  
switch the display.  
you press  
(
WWW ), the display  
switches between the E-mail and the web  
addresses.  
Zone Display  
No.  
City  
Zone Display  
No.  
10 MOW MOSCOW  
11 CAI CAIRO  
12 PAR PARIS  
13 LON LONDON  
City  
Checking details of entries in Telephone mode  
• To display each field on the first line, follow the  
symbol “ ” or “ ” and press or . (The  
symbol above the first line shows each field.)  
CLOCK  
Each time you press  
, the clock switches  
0
1
2
3
TNG TONGA  
• Press and hold  
first line. Press  
to start the auto scroll on the  
again to stop or restart the  
to quit the auto scroll.  
between Home and World clocks. (For World  
clock, “ ” is not displayed.)  
WLG WELLINGTON  
NOU NOUMEA  
SYD SYDNEY  
CCE  
scroll. Press  
3.3 ADL ADELAIDE  
14  
15  
16  
AZ0 AZORES ISLANDS  
-2H 2hrs behind LON  
RIO RIO DE JANEIRO  
1. Before setting the clock  
4
5
6
TYO TOKYO  
HKG HONG KONG  
BKK BANGKOK  
• The default setting for the date is “MM/DD/  
YYYY” (month-day-year). To change the setting  
to “DD/MM/YYYY” (day-month-year) or “YYYY/  
MM/DD” (year-month-day):  
Recalling entries – Telephone, Schedule, Memo –  
17 CCS CARACAS  
18 NYC NEW YORK  
19  
20 DEN DENVER  
21  
22 ANC ANCHORAGE  
23 HNL HONOLULU  
24 MID MIDWAY  
6.3 RGN YANGON  
DAC DHAKA  
7.3 DEL NEW DELHI  
KHI KARACHI  
8.3 KBL KABUL  
DXB DUBAI  
7
CHI CHICAGO  
First press the desired mode key.  
Sorting order  
NEXT  
: Recalls entries in forward order  
• Telephone and memo entries are stored by the  
first character of the person’s name or memo  
item in the following order (case sensitive):  
CLOCK  
1. Press  
once or twice to display the  
8
LAX LOS ANGELES  
PREV  
: Recalls entries in reverse order  
Home clock (with “ ”).  
9
2. Press DATE TYPE  
.
9.3 THR TEHRAN  
Sequential search  
PREV  
NEXT  
3. Press  
or  
to select the  
NEXT  
PREV  
Press  
or  
in each mode.  
desired type.  
ENTER  
4. Press  
to store the new setting.  
3. Using World clock  
Direct search  
• To change the 12-hour clock to the 24-hour  
clock, press 12 24 (“A” or “P” is cleared).  
Each time you press 12 24 , the clock  
switches.  
• Enter the first characters (eight characters or  
under) of the person’s name, schedule details,  
NEXT  
CLOCK  
1. Press  
once or twice to display World  
clock (without “ ”).  
• Schedule entries are stored by date and time.  
Note  
• When there is no (further or relevant) entry to  
be recalled, “NOT FOUND!” appears briefly, and  
the display returns to the mode screen.  
or memo item, and press  
or  
PREV  
NEXT  
2. Press  
or  
to select the  
PREV  
NEXT  
PREV  
. Then press  
or  
to  
desired city.  
• In the period of daylight saving time/summer  
continue performing a direct search.  
time, press  
in advance (“#” is displayed).  
DST  
4. Changing the cities between Home  
and World clocks  
You can change the home city for a city in another  
2. Setting the clock  
CLOCK  
1. Press  
once or twice to display Home  
time zone without adjusting the stored correct  
Editing or deleting entries – Telephone, Schedule, Memo –  
clock (with “ ”).  
2. Press SHIFT SET to start setting.  
The cursor starts to flash on the city name.  
time.  
1. Press  
CLOCK  
once or twice to display World  
Editing  
5. Press ENTER several times (until “STORED!”  
appears briefly) to finish editing and to store  
the entry.  
clock (without “ ”).  
1. Recall the entry to be edited.  
PREV  
NEXT  
3. Press  
or  
to select the  
PREV  
NEXT  
2. Press  
or  
and select the  
EDIT  
2. Press  
. The cursor starts to flash.  
desired time zone. (Refer to the list of cities  
described below.)  
desired city to be set as the new home city.  
• In Telephone mode press ENTER several  
times to display each field (the address field  
and so on).  
Deleting  
1. Recall the entry to be deleted.  
SHIFT SET  
3. Press  
to change the cities  
• Enter the city name, if needed (six characters  
or under). Only one changed name for Home  
clock can be stored.  
to move the cursor to the month.  
5. Enter the month, the day (two digits each), and  
the year (four digits).  
between Home and World clocks.  
DEL  
2. Press  
.
• The previous home city is now set as the  
world city (without “ ”).  
CLOCK  
3. Press  
,
,
, or to move the cursor to  
• “DELETE?” is displayed.  
• To cancel the deletion operation, press  
the position to be edited.  
4. Enter, insert, or delete characters (refer to  
“Entering Characters”).  
CCE  
4. Press  
4. Press  
to check the home city.  
• The selected city in step 2 is set as the home  
city (with “ ”).  
CCE  
.
3. Press ENTER to delete the entry.  
• To cancel editing, press  
.
• The built-in calendar extends from January 1,  
1901, to December 31, 2098.  
CLOCK  
5. Press  
press  
to recheck the world city, and  
PREV  
NEXT  
or  
to select the new  
6. Press AM/PM to select “A” (morning) or “P”  
(afternoon) for the 12-hour clock.  
7. Enter the time (hours and minutes).  
Note: P12-00: noon, A12-00: midnight  
ENTER  
world city, if needed.  
8. Press  
seconds.  
. The clock starts from “00”  
PRINTED IN CHINA  
04MT (TINSE0808EHZZ)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EL6930(En).p65  
1
04.12.6, 2:20 PM  

Sharp PDAs Smartphones YO 515 User Manual
Sierra Monitor Corporation Carbon Monoxide Alarm 5100 28 IT User Manual
Snapper Snow Blower 1687099 User Manual
Sony Camcorder HVR Z1E Z1P User Manual
Sony Camcorder HXR NX5N User Manual
Sony Stereo Receiver STR DN1010 User Manual
Speco Technologies Speaker SP 525C User Manual
Sterling Weather Radio S 8312 User Manual
Sunrise Medical Mobility Aid P 222 SE User Manual
Symphonic TV VCR Combo WF0213C User Manual