Sharp Model Vehicle LC 32GP1U User Manual

ENGLISH  
FRANÇAIS  
ESPAÑOOLL  
LC-32GP1U  
LC-37GP1U  
LIQUID CRYSTAL TELEVISION  
TÉLÉVISEUR ACL  
TELEVISOR CON PANTALLA DE  
CRISTAL LÍQUIDO  
OPERATION MANUAL  
MODE D'EMPLOI  
MANUAL DE OPERACIÓN  
IMPORTANT : Please read this operation manual before  
starting operating the equipment.  
IMPORTANTE : Lea este manual de operación antes de  
comenzar a operar el equipo.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LC-32GP1U  
LC-37GP1U  
LIQUID CRYSTAL TELEVISION  
ENGLISH  
OPERATION MANUAL  
• The illustrations and on-screen displays in this operation  
manual are for explanation purposes and may vary slightly from  
the actual operations.  
• Menu items that are not selectable are grayed out.  
• The examples used throughout this manual are based on the  
LC-37GP1U model.  
IMPORTANT:  
Model No.:  
Serial No.:  
To aid reporting in case of loss or theft, please record the  
TV's model and serial numbers in the space provided. The  
numbers are located at the rear of the TV.  
IMPORTANT INFORMATION  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO  
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.  
WARNING:  
The lightning flash with arrow-head  
symbol, within an equilateral triangle,  
is intended to alert the user to the  
presence of uninsulated “dangerous  
voltage” within the product's  
enclosure that may be of sufficient  
magnitude to constitute a risk of  
electric shock to persons.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
The exclamation point within a  
triangle is intended to alert the user  
to the presence of important  
operating and maintenance  
(servicing) instructions in the  
literature accompanying the product.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT INFORMATION  
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE  
SLOT, FULLY INSERT.  
CAUTION:  
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE.  
THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO  
THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED  
BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S  
INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES  
RECOMMENDED BY THE MANUFACTURER. A PRODUCT AND CART COMBINATION SHOULD BE  
MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE  
THE PRODUCT AND CART COMBINATION TO OVERTURN.  
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly  
approved by the manufacturer could void the user's authority to operate this equipment.  
CAUTION:  
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other  
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded  
cables and connectors for connections.  
DECLARATION OF CONFORMITY:  
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-32GP1U/LC-37GP1U  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
RESPONSIBLE PARTY:  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07430-2135  
TEL: 1-800-BE-SHARP  
INFORMATION:  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
“Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National  
Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the  
grounding system of the building, as close to the point of cable entry as practical.”  
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be  
regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the  
Trademarks  
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby  
Laboratories.  
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI  
Licensing LLC.”  
• Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy  
efficiency.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEAR SHARP CUSTOMER  
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years  
of trouble-free operation of your product, please read the Important Safety Instructions carefully before  
using this product.  
IMPORTANT SAFETY INSTRUCTIONS  
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage  
if improperly handled. This product has been engineered and manufactured with the highest priority on safety.  
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please  
observe the following instructions when installing, operating and cleaning the product. To ensure your safety  
and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully  
before using the product.  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The  
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,  
consult an electrician for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,  
and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold  
with the apparatus. When a cart is used, use caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate  
normally, or has been dropped.  
Additional Safety Information  
15) Power Sources—This product should be operated only from the type of power source indicated on the  
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or  
local power company. For products intended to operate from battery power, or other sources, refer to the  
operating instructions.  
16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this  
can result in a risk of fire or electric shock.  
17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may  
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill  
liquid of any kind on the product.  
18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified  
service personnel under the following conditions:  
a) When the AC cord or plug is damaged,  
b) If liquid has been spilled, or objects have fallen into the product,  
c) If the product has been exposed to rain or water,  
d) If the product does not operate normally by following the operating instructions.  
Adjust only those controls that are covered by the operating instructions as an improper adjustment  
of other controls may result in damage and will often require extensive work by a qualified technician  
to restore the product to its normal operation,  
e) If the product has been dropped or damaged in any way, and  
f) When the product exhibits a distinct change in performance - this indicates a need for service.  
19) Replacement Parts—When replacement parts are required, be sure the service technician has used  
replacement parts specified by the manufacturer or have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock, or other hazards.  
20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to  
perform safety checks to determine that the product is in proper operating condition.  
21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product  
according to the method recommended by the manufacturer.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash  
bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.  
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the  
product on an unstable base can cause the product to fall, resulting in serious personal injuries  
as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended  
by the manufacturer or sold with the product. When mounting the product on a wall, be sure to  
follow the manufacturer's instructions. Use only the mounting hardware recommended by the  
manufacturer.  
• Selecting the location — Select a place with no direct sunlight and good ventilation.  
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not  
cover or block these vents and openings since insufficient ventilation can cause overheating  
and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other  
similar surface, since they can block ventilation openings. This product is not designed for built-  
in installation; do not place the product in an enclosed place such as a bookcase or rack, unless  
proper ventilation is provided or the manufacturer's instructions are followed.  
• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the  
product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in  
case the panel breaks.  
• Heat — The product should be situated away from heat sources such as radiators, heat  
registers, stoves, or other products (including amplifiers) that produce heat.  
• The Liquid Crystal panel is a very high technology product with 6,220,800 thin film transistors, giving you fine picture details.  
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that this  
does not affect the performance of your product.  
Precautions when transporting the TV  
• Be sure to always carry the TV by two people holding it with two hands — one hand on  
each side of the TV.  
• Lightning — For added protection for this television equipment during a lightning storm, or  
when it is left unattended and unused for long periods of time, unplug it from the wall outlet  
and disconnect the antenna. This will prevent damage to the equipment due to lightning and  
power-line surges.  
• Power Lines — An outside antenna system should not be located in the vicinity of overhead  
power lines or other electric light or power circuits, or where it can fall into such power lines  
or circuits. When installing an outside antenna system, extreme care should be taken to keep  
from touching such power lines or circuits as contact with them might be fatal.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
• Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna  
system is grounded so as to provide some protection against voltage surges and built-up static charges.  
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast  
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location  
of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70  
ANTENNA  
LEAD IN WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING ELECTRODE  
SYSTEM  
(NEC ART 250, PART H)  
NEC — NATIONAL ELECTRICAL CODE  
• To prevent fire, never place any type of candle or flames on the top or near the TV set.  
• To prevent fire or shock hazard, do not expose this product to dripping or splashing.  
No objects filled with liquids, such as vases, should be placed on the product.  
• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy  
items.  
• Turn off the main power and unplug the AC cord from the wall outlet before handling.  
• Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may  
scratch the panel surface.  
• Use a soft damp cloth to gently wipe the panel when it is really dirty.  
(It may scratch the panel surface when wiped strongly.)  
• If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.  
• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it,  
such materials may damage the panel surface.  
• To clean the outer cabinet, use the same method. Do not use liquid or aerosol cleaners.  
• Do not display a still picture for a long time, as this could cause an afterimage to remain.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Supplied accessories  
Make sure the following accessories are provided with the product.  
Remote control unit “AAA” size battery  
1) 2)  
AC cord  
1)  
Page 7  
Cable Clamp ( 1)  
Stand unit  
1)  
Page 6  
Operation manual  
1)  
g
(
(
(
Cable tie ( 1)  
(
(
g
g
g
g
g
g
Page 8  
Page 8  
Page 7  
NOTE  
• Always use the AC cord supplied with the TV.  
QUICK REFERENCE  
Attaching the stand  
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.  
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being  
damaged.  
CAUTION  
Attach the stand in the correct direction.  
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.  
Confirm that there are 9 screws (all the same  
size) supplied with the TV.  
Insert the stand into the openings on the  
bottom of the TV.  
Insert and tighten the 4 screws into the 4  
holes on the rear of the TV.  
1
2
1
2
3
Hex key  
Screw  
2
Set the post for the stand unit onto the  
box.  
1
Attach the base to the post.  
Insert and tighten the 5 screws into the 5  
holes on the bottom of the base.  
2
3
Soft cushion  
Hex key  
Screw  
3
1
2
NOTE  
• To detach the stand, perform the steps in reverse order.  
1
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK REFERENCE  
STOP! To safely remove the AQUOS television from the box  
• It's best to use 2 people to remove the AQUOS television for stability.  
• Lift onto installation location as the diagram illustrates.  
Ventilation & Cleaning Tips  
Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use near  
water. The AQUOS television is designed for AC use only and should be used with supplied AC cord.  
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and  
avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use  
liquid or aerosol cleaners.  
The screen is glass and can be scratched or broken when dropped or impacted.  
QUICK INSTALLATION TIPS  
Attach your antenna to the back of the AQUOS  
television. (See page 12.)  
How to turn on the AQUOS television for the  
first time.  
A) Press POWER on AQUOS television.  
1
2
4
Connect the AC plug for the AQUOS television  
into the AC outlet.  
POWER  
B) POWER indicator on the front of the  
AQUOS television lights GREEN.  
AC outlet  
• Place the TV close to the AC outlet, and keep the power  
plug within reach.  
NOTE  
TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT  
TOUCH UN-INSULATED PARTS OF ANY CABLES  
WITH THE AC CORD CONNECTED.  
POWER indicator  
Place the Ferrite core in the space indicated in  
3
the below figure and bundle the cords properly  
NOTE  
with cable clamp and a cable tie.  
• Speakers cannot be detached from the TV.  
• TV angle cannot be adjusted.  
Ferrite core  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
QUICK REFERENCE  
If the remote control fails to operate TV functions, replace the batteries in the remote control unit.  
1 Open the battery cover.  
2 Insert two “AAA” size batteries  
(supplied with the product).  
3 Close the battery cover.  
• Place the batteries with their terminals  
corresponding to the ( ) and (  
indications in the battery compartment.  
)
e
f
CAUTION  
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.  
• Do not mix batteries of different types. Different types of batteries have different characteristics.  
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical  
leakage in old batteries.  
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a  
rash. If you find any chemical leakage, wipe thoroughly with a cloth.  
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.  
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.  
Remote control sensor  
17 (5 m)  
n
30°  
30°  
IMPORTANT:  
The POWER indicator on the AQUOS television should light GREEN indicating you have power to the AQUOS  
television.  
If the POWER indicator on the AQUOS television still does not light up, press TV POWER on  
the remote control to turn the power on.  
IMPORTANT:  
IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT  
THE INSTALLATION STEPS.  
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.  
Please refer to the BASIC ADJUSTMENT SETTINGS SECTION for EZ Setup and basic channel setup functions  
and USING EXTERNAL EQUIPMENT SECTION for other device connections (DVD, VCR, AUDIO, etc.) in your  
AQUOS operation manual.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
IMPORTANT INFORMATION ................................. 1  
Trademarks............................................................. 2  
DEAR SHARP CUSTOMER .................................... 3  
IMPORTANT SAFETY INSTRUCTIONS................. 3  
Supplied accessories............................................. 6  
QUICK REFERENCE............................................... 6  
Attaching the stand............................................. 6  
Contents.................................................................. 9  
Part names.............................................................10  
TV (Front)...........................................................10  
TV (Rear/Side)....................................................10  
Remote control unit ...........................................11  
Preparation ............................................................12  
Using the remote control unit.............................12  
Cautions regarding the remote control unit....12  
Antennas ...........................................................12  
Connecting a game console ..............................13  
Playing a game..................................................13  
Connecting a subwoofer....................................13  
Connecting a Blu-ray disc player, HD-DVD player,  
DVD player or a Digital TV STB (Air or Cable)...14  
Connecting a VCR, game console  
or camcorder...................................................15  
Using Digital Audio Output.................................15  
Connecting HDMI equipment.............................15  
Connecting a PC ...............................................16  
PC compatibility chart........................................16  
Watching TV...........................................................17  
Turning on the power.........................................17  
Turning off the power.........................................17  
Initial setup ........................................................18  
Simple button operations for  
Using external equipment.................................... 31  
Displaying an external equipment image ........... 31  
Input Select ...................................................... 31  
Displaying an image from HDMI equipment....... 33  
Input Skip ......................................................... 33  
Useful adjustment settings.................................. 34  
Auto Sync. adjustment  
(for Analog PC input mode only) ..................... 34  
Fine Sync. adjustment  
(for DVI input mode only) ................................ 34  
Language setting.............................................. 35  
Image position.................................................. 35  
Reset................................................................ 35  
Input Label........................................................ 36  
Sleep Timer ...................................................... 36  
View Mode for 4:3 Programs ............................ 37  
View Mode for HD Programs ............................ 37  
View Mode (for PC input mode) ........................ 38  
Advanced Option settings................................. 39  
Audio Only ................................................... 39  
Digital Noise Reduction ................................ 39  
Output Select............................................... 39  
Color System ............................................... 39  
Program Title Display ................................... 39  
AV MODE......................................................... 40  
Input Signal (for PC input mode) ....................... 40  
Closed Captions and Digital Closed Captions... 41  
Caption Setup .................................................. 42  
Secret number setting for parental control ........ 43  
Parental control (setting V-CHIP level)............... 45  
How to temporarily release  
the V-CHIP BLOCK ........................................ 48  
Reactivating the temporarily released  
changing channels .........................................19  
Simple button operations for  
V-CHIP BLOCK.............................................. 48  
Other viewing options.......................................... 49  
Freezing images................................................ 49  
Presetting remote control function .................... 49  
Appendix ............................................................... 53  
Removing the stand.......................................... 53  
Setting the TV on the wall ................................. 53  
Troubleshooting................................................ 54  
Troubleshooting-Digital broadcasting................ 54  
Specifications .................................................. 55  
Optional accessory............................................55  
Calling for Service ................................................ 57  
LIMITED WARRANTY........................................... 57  
changing volume/sound .................................20  
Setting MTS/SAP stereo mode..........................21  
Setting Digital broadcasting audio mode............21  
Basic adjustment settings................................... 22  
Menu operation buttons.................................... 22  
On-Screen Display............................................ 22  
Menu items for TV/INPUT 1/2/3........................ 23  
Menu items for HDMI/DVI ................................. 23  
EZ Setup .......................................................... 24  
Channel Setup.................................................. 24  
Antenna Setup-DIGITAL ................................... 25  
Favorite channel setting .................................... 26  
Picture adjustments.......................................... 27  
OPC setting ................................................. 27  
Advanced picture adjustments..................... 28  
Color Temperature....................................... 28  
Black............................................................ 28  
3D-Y/C ........................................................ 28  
Monochrome ............................................... 28  
Film Mode (3:2 pull-down)............................ 28  
Range of OPC.............................................. 28  
Sound adjustment ............................................ 29  
Surround .......................................................... 29  
Subwoofer........................................................ 29  
Power Control .................................................. 30  
Digital Setup ..................................................... 30  
Audio Setup................................................. 30  
Dimensional drawings  
• The dimensional drawings for the LCD TV set are shown on  
the inside back cover.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part names  
TV (Front)  
Remote control sensor  
OPC sensor*  
OPC indicator*  
SLEEP indicator**  
POWER indicator**  
NOTE  
*OPC: Optical Picture Control (See page 27.)  
**See page 17 for TV status indicator.  
TV (Rear/Side)  
Channel buttons  
(CH  
INPUT button  
/
)
V U  
HDMI terminal (INPUT 5)  
HDMI terminal (INPUT 6)  
Volume  
buttons  
(VOL  
POWER button  
/
)
l k  
DVI-I terminal (INPUT 7)  
DIGITAL AUDIO OUTPUT terminal  
AUDIO terminal (INPUT 7)  
AUDIO terminals (INPUT 6)  
Antenna/Cable in  
HDMI terminal (INPUT 4)  
INPUT 1 terminals  
INPUT 3 terminals  
INPUT 2 terminals  
AC INPUT terminal  
AUDIO OUTPUT terminals  
SUBWOOFER PRE OUT  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part names  
1
TV POWER: Switch the TV power on or enters  
standby. (See page 17.)  
Remote control unit  
2
3
DISPLAY: Display the channel information.  
SOURCE POWER: Turns the power of the external  
equipment on and off.  
1
15  
4
External equipment operational buttons: Operate  
the external equipment.  
5
6
7
8
0 – 9: Set the channel. (See page 19.)  
• (DOT): (See pages 19 and 51.)  
GAME: Selects INPUT 1 or INPUT 4. (See page 13.)  
INPUT: Select a TV input source. (TV, INPUT 1,  
INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6,  
INPUT 7) (See pages 31 and 32.)  
2
3
16  
17  
4
9
VOL  
/
: Set the volume. (See page 20.)  
k l  
10 SURROUND: Select Surround settings. (See page  
20.)  
5
6
11 FREEZE: Set the still image. Press again to return to  
normal screen. (See page 49.)  
12 EXIT: Turn off the menu screen.  
13 SLEEP: Set the sleep timer. (See page 36.)  
18  
19  
7
8
9
14 AUDIO: Selects the MTS/SAP or the audio mode  
during multi-channel audio broadcasts. (See page 21.)  
20  
21  
15 FUNCTION: Switches the remote control for TV,  
CBL/SAT, VCR, DVD and AUDIO operation. Indicator  
lights up for the current mode. (See pages 49 to 52  
for details.)  
* To enter the code registration mode, you need to  
press FUNCTION and DISPLAY at the same time.  
16 LIGHT : When pressed all buttons on the remote  
10  
11  
22  
23  
'
control unit will light. The lighting will turn off if no  
operations are performed within about 5 seconds.  
This button is used for performing operations in low-  
light situations.  
12  
24  
25  
17 VIEW MODE: Select the screen size. (See pages 37  
26  
27  
and 38.)  
18 ENT: Jumps to a channel after selecting with the 0–9  
buttons.  
19 FLASHBACK: Return to the previous channel or  
13  
14  
external input mode. (See page 19.)  
20 CH  
/
: Select the channel. (See page 19.)  
U V  
28  
21 MUTE: Mute the sound. (See page 20.)  
22 MENU: Display the menu screen.  
23  
/
/
/
/ENTER: Select a desired item on the  
a b c d  
screen.  
24 RETURN: Return to the previous menu screen.  
25 FAVORITE CH  
A, B, C, D: Select 4 preset favorite channels in 4  
different categories. (See page 26 for details.)  
While watching, you can toggle the selected channels  
by pressing A, B, C and D.  
26 FAVORITE: Set the favorite channels. (See page 26.)  
27 CC: Display captions from a closed-caption source.  
(See page 41.)  
28 AV MODE: Select an audio or video setting.  
(When the input source is TV, INPUT 1, 2 or 3:  
STANDARD, MOVIE, GAME, USER, DYNAMIC (Fixed),  
DYNAMIC. When the input source is INPUT 4, 5, 6 or  
7: STANDARD, MOVIE, GAME, PC, USER, DYNAMIC  
(Fixed), DYNAMIC.) (See page 40.)  
NOTE  
• When using the remote control unit, point it at the TV.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
Using the remote control unit  
Use the remote control unit by pointing it towards the remote control sensor on the  
TV. Objects between the remote control unit and the remote control sensor may  
prevent proper operation.  
Cautions regarding the remote control unit  
• Do not expose the remote control unit to shock. In addition, do not expose the remote  
control unit to liquids, and do not place in an area with high humidity.  
• Do not install or place the remote control unit under direct sunlight. The heat may cause  
deformation of the remote control unit.  
• The remote control unit may not work properly if the remote control sensor on the TV is  
under direct sunlight or strong lighting. In such cases, change the angle of the lighting or  
the TV, or operate the remote control unit closer to the remote control sensor.  
Antennas  
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections  
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector,  
plug it into the antenna terminal at the rear of the TV set.  
1. A 75-ohm system is generally a round cable with F-type  
connector that can easily be attached to a terminal  
without tools (Commercially available).  
F-type connector should be finger-  
tightened only.  
NOTICE  
When connecting the RF cable to the TV set, do not  
tighten F-type connector with tools.  
F-type connector  
If tools are used, it may cause damage to your TV  
set. (The breaking of internal circuit, etc.)  
75-ohm coaxial cable (round)  
2. A 300-ohm system is a flat “twin-lead” cable that can be  
attached to a 75-ohm terminal through a 300/75-ohm  
adapter (Commercially available).  
F-type connector  
300-ohm twin-lead cable (flat)  
75-ohm coaxial cable  
Connecting Antenna Cable  
Home Antenna  
terminal (75-ohm)  
Cable TV lead-In  
Cable without a CATV  
converter  
1
Coaxial cable  
(commercially available)  
VHF/UHF antenna  
2
Connect the antenna cable  
to the TV using one of the  
Home Antenna  
terminal (75-ohm)  
75-ohm coaxial cable (round)  
methods in the illustration  
as shown (  
,
,
or  
).  
4
1 2 3  
Coaxial cable  
(commercially available)  
Combination VHF/  
UHF antenna  
3
or  
75-ohm coaxial cable (round)  
300-ohm twin-lead cable (flat)  
UHF  
300/75-ohm adapter  
(commercially available)  
VHF  
ANTENNA ANTENNA  
Separate VHF/UHF  
antenna  
300-ohm  
twin-lead cable  
4
Combiner  
(commercially  
available)  
300-ohm twin-lead cable  
IN  
OUT  
or  
To TV antenna  
terminal  
75-ohm coaxial cable  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
You can connect many types of external equipment to your TV like a game console, Blu-ray disc player, HD-DVD  
player, DVD player, VCR, Digital TV tuner, HDMI equipment or camcorder. To view external source images, select the  
input source from INPUT on the remote control unit or on the TV. (See pages 31 to 33.)  
CAUTION  
• To protect equipment, always turn off the TV before connecting any external equipment.  
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.  
Connecting a game console  
You can enjoy games at the optimum display speed when connecting to a game console using INPUT 1 or  
INPUT 4 terminal.  
When connecting to a game console using the INPUT4 terminal. (HDMI terminal)  
NOTE  
HDMI cable  
• To enjoy the AQUOS 1080p display  
capability, connect your game console  
using an HDMI cable and set the game  
console to 1080p output.  
(commercially available)  
Game console  
(HDMI terminal)  
When connecting to a game console using the INPUT 1 terminal. (component or composite terminals)  
NOTE  
Component video cable  
(commercially available)  
• To enjoy the AQUOS 1080p display  
capability, connect your game console  
using a component video cable and set the  
game console to 1080p output.  
• When the game console is connected using  
both component terminals and composite  
terminal, the component terminals take  
priority over the composite terminal.  
Audio cable  
(commercially available)  
Game console (component terminals)  
Playing a game  
When you press GAME on the remote control unit, the input from INPUT 1 or INPUT  
4 terminal is automatically selected and displayed on the TV screen at the optimum  
speed. You can toggle INPUT 1 and INPUT 4 by pressing GAME on the remote control  
unit. Press CH or 0-9 when you want to switch back to the TV.  
/
ꢀU V  
Connecting a subwoofer  
You can enjoy games with stronger bass when connecting a subwoofer using the subwoofer terminal.  
Example  
Audio cable  
(commercially available)  
Subwoofer (commercially available)  
NOTE  
• When you connect the subwoofer, set the “Subwoofer” to “On” on the Audio menu. (See page 29.)  
• This feature is only available for active subwoofer and may not be compatible with some subwoofer products.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
Connecting a Blu-ray disc player, HD-DVD player, DVD player or a Digital  
TV STB (Air or Cable)  
You can use the INPUT 1, INPUT 2, INPUT 3 or INPUT 7 terminals when connecting to a Blu-ray disc player, HD-  
DVD player, DVD player, a Digital TV STB (Air or Cable) and other audiovisual equipment.  
When using composite cable. (INPUT 1 or 2)  
Example  
AV cable  
(commercially available)  
Blu-ray disc player/HD-DVD player/  
DVD player/Digital TV STB  
When using component cable. (INPUT 1 or 3)  
Example  
Component video cable  
(commercially available)  
Audio cable  
(commercially available)  
Blu-ray disc player/HD-DVD player/  
DVD player/Digital TV STB  
When using DVI cable. (INPUT 7)  
DVI cable  
(commercially available)  
Ø 3.5 mm stereo minijack cable  
(commercially available)  
DVD player/Digital TV STB  
NOTE  
• To enjoy the AQUOS 1080p display capability, connect your external equipment using a component cable and set the  
equipment to 1080p output.  
• See page 15 for connecting a DVD player or a Digital TV STB to the HDMI terminal.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
Connecting a VCR, game console or camcorder  
A VCR, game console, camcorder and other audiovisual equipment can be conveniently connected using the  
INPUT 1 or 2 terminals.  
When using S-VIDEO cable. (INPUT 2)  
S-VIDEO cable  
(commercially available)  
Audio cable  
(commercially available)  
VCR/Game console/Camcorder  
When using composite cable. (INPUT1 or 2)  
Example  
AV cable  
(commercially available)  
VCR/Game console/Camcorder  
NOTE  
• The S-VIDEO terminal takes priority over the video terminals. (INPUT 2 only)  
Using Digital Audio Output  
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 30 for details.) PCM audio  
outputs from the terminal.  
Optical fiber cable  
(commercially available)  
External audio devices  
Connecting HDMI equipment  
You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment.  
Example  
HDMI cable  
(commercially available)  
HDMI equipment  
NOTE  
When using an HDMI-DVI conversion cable, input the audio signal to AUDIO terminal of INPUT 6.  
To enjoy the AQUOS 1080p display capability, connect your Blu-ray disc player, HD-DVD player or other external equipment using an HDMI  
cable and set the equipment to 1080p output.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
Connecting a PC  
When connecting to a PC with a DVI terminal. (INPUT 7)  
RGB/DVI Conversion cable  
(commercially available)  
Ø 3.5 mm stereo minijack cable  
(commercially available)  
PC  
NOTE  
• If you are connecting the TV to a PC with a DVI terminal, use a DVI cable (commercially available) instead of a RGB/DVI  
conversion cable.  
When connecting to a PC with an HDMI terminal. (INPUT 4, 5 or 6)  
Example  
HDMI cable  
(commercially available)  
PC  
NOTE  
The HDMI terminals only support digital signal.  
PC compatibility chart  
It is necessary to set the PC correctly to display XGA and WXGA signal. Refer to page 40 to set PC input signals.  
PC  
Resolution  
720 x 400  
Horizontal Frequency  
Vertical Frequency  
VESA Standard  
31.5 kHz  
70 Hz  
31.5 kHz  
37.9 kHz  
37.5 kHz  
35.1 kHz  
37.9 kHz  
48.1 kHz  
46.9 kHz  
48.4 kHz  
56.5 kHz  
60.0 kHz  
47.7 kHz  
64.0 kHz  
64.0 kHz  
75.0 kHz  
60 Hz  
72 Hz  
75 Hz  
56 Hz  
60 Hz  
72 Hz  
75 Hz  
60 Hz  
70 Hz  
75 Hz  
60 Hz  
60 Hz  
60 Hz  
60 Hz  
O
O
O
O
O
O
O
O
O
O
O
O
O
O
VGA  
640 x 480  
800 x 600  
1024 x 768  
SVGA  
XGA  
PC  
WXGA  
SXGA  
SXGA*  
UXGA*  
1360 x 768  
1280 x 1024  
1400 x 1050  
1600 x 1200  
*DVI input only.  
DDC is a registered trademark of Video Electronics Standards Association.  
Power Management is a registered trademark of Sun Microsystems, Inc.  
VGA and XGA are registered trademarks of International Business Machines Co., Inc.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Simple operations for watching a TV program  
Turning on the power  
Press POWER on the TV, or TV POWER on the  
remote control unit.  
• POWER indicator (Green): The TV is on. (After a few  
seconds, a window appears with sound.)  
NOTE  
• The initial setup starts when the TV powers on for the first  
time. If the TV has been turned on before, the EZ Setup will  
not be invoked. See page 24 for performing EZ Setup from  
the Setup menu.  
POWER  
Turning off the power  
Press POWER on the TV, or TV POWER on the  
remote control unit.  
• The TV enters standby and the image on the screen  
disappears.  
• The POWER indicator on the TV turns off.  
POWER  
OPC indicator  
indicator  
NOTE  
SLEEP indicator  
• If you are not going to use this TV for a long period of time,  
be sure to remove the AC cord from the AC outlet.  
• Weak electric power is still consumed even when POWER  
is turned off.  
TV POWER (On/Standby)  
TV status indicator (POWER)  
TV status indicator (OPC)  
ON  
Lighting (Green)  
Lights off  
“Off” is selected in OPC setting  
Lights off  
Standby  
“On” or “On: Display” is selected in OPC setting  
Lighting (Green)  
• See page 27 for details.  
TV status indicator (SLEEP)  
“Off” is selected in SLEEP setting  
Lights off  
“30”, “60”, “90” or “120” is selected in SLEEP setting  
Lighting (Red)  
• See page 36 for details.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Initial setup  
When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you live.  
Perform the following steps before you press TV POWER on the remote control unit.  
1. Insert the batteries into the remote control unit. (See page 8.)  
2. Connect the antenna cable to the TV. (See page 12.)  
3. Plug in the AC cord to the AC outlet. (See page 7.)  
Channel search  
Channel auto search makes the TV look for all  
channels viewable in the set area.  
When “Air” is selected in Antenna setting:  
3
Press  
/
to select “Start”, and then press  
c d  
ENTER.  
Language  
Air/Cable  
CH Search  
Language setting  
Select from among 3 languages: English, French and  
Spanish.  
Start  
Cancel  
Press  
/
to select the desired language  
a b  
1
listed on the screen, and then press ENTER.  
Language  
Air/Cable  
CH Search  
English  
Français  
Español  
When “Cable” is selected in Antenna  
setting:  
Press  
/
to select “Analog & Digital Search  
a b  
Start” to search both analog and digital  
broadcasts or “Analog Search Start” to search  
only analog broadcasts, and then press  
ENTER.  
Antenna setting  
Language  
Make sure what kind of connection is made with your  
TV when selecting “Air” or “Cable”.  
Air/Cable  
CH Search  
Analog & Digital Search Start  
Analog Search Start  
Cancel  
Press  
/
to select “Air” or “Cable”.  
c d  
2
Press ENTER to enter the setting.  
Example  
Language  
Air/Cable  
CH Search  
• The Channel search will start automatically.  
• To exit the Channel search screen, select “Cancel”,  
and then press ENTER.  
Air  
Cable  
Example  
CH Search  
Air [ 25 ]  
Found [ 20 ]  
Air  
ANALOG  
2
MONO  
Audio  
:
NOTE  
• If no channel is found, confirm the type of connection made  
with your TV and try EZ Setup again. (See page 24.)  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Method 1  
Simple button operations for  
changing channels  
Using CH  
/
on the remote control unit or on the  
ꢀU V  
TV.  
You can change channels in several ways.  
Method 2  
Press FLASHBACK to switch to the previously  
tuned channel.  
1
Press FLASHBACK again to switch back to the  
currently tuned channel.  
2
NOTE  
FLASHBACK will not work if no channel has been  
changed after the TV is turned on.  
Method 3  
Using remote control buttons 0-9, • (DOT) to select  
channels for VHF/UHF/CATV/DIGITAL.  
To select a 1 or 2-digit channel number  
(e. g., Channel 5):  
Press 5 ENT  
s
Air  
Air  
ANALOG  
5
5
NOTE  
• When selecting a 1-digit channel number, it is not  
necessary to press 0 before the number.  
• When you enter 0-9 only, channel selection will be made if  
there is no operation within a few seconds.  
To select a 3-digit channel number  
(e. g., Channel 115):  
Press 1  
1
5
ENT  
s s s  
Cable  
Cable  
Cable  
ANALOG  
115  
1
11  
To select a 4-digit channel number  
(e. g., Channel 22.1):  
Press 2  
2
• (DOT)  
1 ENT  
s s  
Air  
s s  
Air  
Air  
Air  
Air  
DIGITAL  
22.1  
2
22  
22.  
22.1  
NOTE  
• When you enter 0–9 only, channel selection will be made if  
there is no operation within a few seconds.  
• If you push “0” by itself, nothing will happen.  
• Complete the above steps within a few seconds.  
• When you enter 0–9 and (DOT), channel selection will be  
made if there is no operation within a few seconds.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Using MUTE on the remote control unit  
Simple button operations for  
changing volume/sound  
Mutes the current sound output.  
Changing the volume  
You can change the volume on the TV or on the  
remote control unit.  
Press MUTE.  
will be displayed on the screen for 30 minutes, and the  
sound is silenced.  
0
20  
Mute  
Using VOL  
/
k l  
• To increase the volume, press VOL  
.
l
k
• To decrease the volume, press VOL  
.
NOTE  
• Within 30 minutes of pressing MUTE, mute can be  
canceled by using one of the methods below.  
Volume adjustment  
— Mute will cancel if you press VOL  
/
or MUTE.  
l k  
• Mute will be canceled after 30 minutes have passed.  
However, the TV will not suddenly output a loud sound as  
the volume level is set to 0 automatically.  
20  
Using SURROUND on the remote control unit  
NOTE  
VOL  
/
on the TV operates the same as VOL  
/
on  
l k  
k l  
the remote control unit.  
Audio status  
Output Select  
SURROUND produces Surround effect from the  
speakers. Each time you press SURROUND, the  
mode changes between On and Off.  
Output device  
Fixed  
Variable sound  
Variable  
Mute  
Speaker  
Surround sound options  
On: Makes it possible to enjoy natural, realistic  
surround sound.  
* When “Output Select” is set to “Variable”, the indicator on  
the screen changes as shown below.  
Off: Outputs the normal sound.  
20  
Surround : Off  
Surround : On  
NOTE  
NOTE  
• See page 39 for details on the Output Select function.  
• You can have the same settings by choosing “Surround”  
on the menu items. (See page 29.)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Setting MTS/SAP stereo mode  
Setting Digital broadcasting audio  
mode  
The TV has a feature that allows reception of sound  
other than the main audio for the program. This feature  
is called Multi-channel Television Sound (MTS). The TV  
with MTS can receive mono sound, stereo sound and  
Secondary Audio Programs (SAP). The SAP feature  
allows a TV station to broadcast other information,  
which could be audio in another language or something  
completely different like weather information.  
The types of audio transmitted in a digital broadcast  
include SURROUND as well as MONO and STEREO.  
In addition, it is possible for multiple audio tracks to  
accompany a single video track.  
Press AUDIO to toggle  
between audio modes.  
You can enjoy Hi-Fi stereo sound or SAP  
broadcasts where available.  
Stereo broadcasts  
View programs like live sporting events, shows and  
concerts in dynamic stereo sound.  
SAP broadcasts  
Example: when receiving Digital broadcasting  
Receive TV broadcasts in either MAIN or SAP sound.  
MAIN sound: The normal program soundtrack (either in  
mono or stereo).  
Air  
Air  
Air  
DIGITAL  
2.2  
SAP sound: Listen to a second language, supplementary  
commentary or other information. (SAP is mono sound.)  
Audio1  
:
STEREO  
If stereo sound is difficult to hear.  
• Obtain a clearer sound by manually switching to  
fixed mono-sound mode.  
DIGITAL  
2.2  
STEREO  
Audio2  
:
NOTE  
• MTS only operates while in TV mode.  
DIGITAL  
You can change MTS as  
shown below to match the  
television broadcast signal.  
Press AUDIO to toggle  
between audio modes.  
2.2  
SURROUND  
Audio3  
:
Examples: when receiving MTS and SAP  
STEREO mode  
MAIN SAP mode  
k
Air  
ANALOG  
Air  
ANALOG  
2
2
Audio  
:
MAIN  
Audio  
:
STEREO  
Air  
ANALOG  
Air  
ANALOG  
2
SAP  
2
Audio  
:
Audio  
:
MONO  
STEREO SAP mode  
MONO mode  
k
Air  
Air  
Air  
ANALOG  
Air  
ANALOG  
2
2
MONO  
Audio  
Audio  
Audio  
:
ST(SAP)  
Audio  
:
ANALOG  
2
:
SAP(ST)  
ANALOG  
2
:
MONO  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment settings  
Menu operation buttons  
On-Screen Display  
Use the following buttons on the remote control to  
operate the menu.  
Example  
Option  
Audio Only  
Digital Noise Reduction  
Input Select  
[Off]  
[VIDEO]  
[Fixed]  
[Auto]  
Output select  
Color System  
Caption Setup  
Program Title Display  
[No]  
Item displayed in yellow  
1
• This indicates the item currently selected.  
• Press ENTER to go to the adjustment screen for this  
item.  
Item in brackets  
2
3
4
• This indicates the current setting for the item.  
Item displayed in white  
• This indicates an item can be selected.  
Item displayed in gray  
• This indicates that the item cannot be selected.  
There are various reasons why items cannot be  
selected, but the main reasons are as follows:  
—Nothing is connected to the selected input terminal.  
—The function is not compatible with the current input  
signal.  
NOTE  
• Menu options differ in the selected input modes, but the  
operating procedures are the same.  
• The screens in the operation manual are for explanation  
purposes (some are enlarged, others cropped) and may  
vary slightly from the actual screens.  
MENU:  
Press to open or close the menu screen.  
/
/
/
: Press to select a desired item on the  
screen or adjust a selected item.  
a b c d  
ENTER:  
Press to go to the next step or complete  
the setting.  
RETURN: Press to return to the previous step.  
ENTER  
RETURN  
MENU  
: Select  
: Enter  
: Back  
: Exit  
The bar above is an operational guide for  
the remote control. The bar will change in  
accordance with each menu setting screen.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment settings  
Menu items for TV/INPUT 1/2/3  
Menu items for HDMI/DVI  
Picture  
Picture  
OPC.............................................................................. Page 27  
Backlight ..................................................................... Page 27  
Contrast ...................................................................... Page 27  
Brightness .................................................................. Page 27  
Color ........................................................................... Page 27  
Tint .............................................................................. Page 27  
Sharpness .................................................................. Page 27  
Advanced  
Color Temp. .................................................... Page 28  
Black ............................................................... Page 28  
3D-Y/C ............................................................ Page 28  
Monochrome................................................... Page 28  
Film Mode ....................................................... Page 28  
Range of OPC ................................................. Page 28  
Reset ........................................................................... Page 27  
OPC.............................................................................. Page 27  
Backlight ..................................................................... Page 27  
Contrast ...................................................................... Page 27  
Brightness .................................................................. Page 27  
Color ........................................................................... Page 27  
Tint .............................................................................. Page 27  
Sharpness .................................................................. Page 27  
Advanced  
Color Temp. .................................................... Page 28  
Black ............................................................... Page 28  
Monochrome................................................... Page 28  
Film Mode ....................................................... Page 28  
Range of OPC ................................................. Page 28  
Reset ........................................................................... Page 27  
Audio  
Audio  
Treble .......................................................................... Page 29  
Bass............................................................................. Page 29  
Balance........................................................................ Page 29  
Surround...................................................................... Page 29  
Subwoofer................................................................... Page 29  
Reset............................................................................ Page 29  
Treble .......................................................................... Page 29  
Bass............................................................................. Page 29  
Balance........................................................................ Page 29  
Surround...................................................................... Page 29  
Subwoofer................................................................... Page 29  
Reset............................................................................ Page 29  
Power Control  
Power Control  
No Signal Off............................................................... Page 30  
No Operation Off ........................................................ Page 30  
No Signal Off............................................................... Page 30  
No Operation Off ........................................................ Page 30  
Setup  
Setup  
EZ Setup...................................................................... Page 24  
CH Setup ..................................................................... Page 24  
Antenna Setup-DIGITAL............................................. Page 25  
Input Skip .................................................................... Page 33  
Input Label ................................................................. Page 36  
Parental CTRL......................................................Pages 43-48  
Position........................................................................ Page 35  
Language..................................................................... Page 35  
Reset............................................................................ Page 35  
Input Skip .................................................................... Page 33  
Input Signal ................................................................. Page 40  
Auto Sync.................................................................... Page 34  
Input Label ................................................................. Page 36  
Fine Sync..................................................................... Page 34  
Position........................................................................ Page 35  
Language..................................................................... Page 35  
Reset............................................................................ Page 35  
Option  
Option  
Audio Only................................................................... Page 39  
Digital Noise Reduction ............................................. Page 39  
Input Select................................................................. Page 31  
Output Select.............................................................. Page 39  
Color System .............................................................. Page 39  
Caption Setup............................................................. Page 42  
Program Title Display ................................................ Page 39  
Favorite CH ................................................................. Page 26  
Audio Only................................................................... Page 39  
Digital Noise Reduction ............................................. Page 39  
Input Select................................................................. Page 32  
HDMI Setup................................................................. Page 33  
Output Select.............................................................. Page 39  
NOTE  
• Some menu items may not be displayed depending on the  
selected input source.  
Digital Setup  
Audio Setup................................................................. Page 30  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment settings  
EZ Setup  
Channel Setup  
You can run EZ Setup again, even after setting up the  
preset channels.  
If initial setup does not memorize all the channels in  
your region, follow the instructions below to manually  
memorize the channels.  
Language setting  
Select from among 3 languages: English, French and  
Spanish.  
Antenna setting  
Press MENU to display the MENU screen, and  
1
then press  
/
to select “Setup”.  
c d  
Press MENU to display the MENU screen, and  
1
then press  
/
to select “Setup”.  
c d  
Press  
/
to select “CH Setup”, and then  
a b  
2
press ENTER.  
Press  
/
to select “EZ Setup”, and then  
a b  
2
• If you already set the Secret No., input the 4-digit  
secret number here. See page 43 for setting a  
secret number.  
press ENTER.  
• If you already set the Secret No., go to step 3. If  
not, skip to step 4.  
Press  
/
to select “Air/Cable”, and then  
a b  
Input the 4-digit secret number by using 09.  
3
4
5
press ENTER.  
3
4
Press  
/
to select “Air” or “Cable”.  
c d  
Press  
/
to select the desired language  
a b  
Press ENTER to enter the setting.  
listed on the screen, and then press ENTER.  
Press MENU to exit.  
Antenna setting  
Make sure what kind of connection is made with your  
TV when selecting “Air” or “Cable”.  
Channel search  
Channel auto search makes the TV look for all  
channels viewable in the set area.  
Press  
/
to select “Air” or “Cable”.  
c d  
5
Press ENTER to enter the setting.  
Repeat steps 1 and 2 in Antenna setting in  
Channel Setup.  
1
Channel search  
Channel auto search makes the TV look for all  
channels viewable in the set area.  
Press  
/
to select “CH Search”, and then  
a b  
2
3
press ENTER.  
When “Air” is selected in Antenna setting:  
6
Press  
/
to select “Start”, and then press  
c d  
When “Air” is selected in Antenna setting:  
Press  
ENTER.  
ENTER.  
/
to select “Start”, and then press  
c d  
When “Cable” is selected in Antenna  
setting:  
When “Cable” is selected in Antenna  
setting:  
Press  
Start” to search both analog and digital  
broadcasts or “Analog Search Start” to search  
only analog broadcasts, and then press  
ENTER.  
• The Channel search will start automatically.  
• To exit the Channel search screen, select “Cancel”,  
and then press ENTER.  
Press  
/
to select “Analog & Digital Search  
a b  
Start” to search both analog and digital  
broadcasts or “Analog Search Start” to search  
only analog broadcasts, and then press  
ENTER.  
/
to select “Analog & Digital Search  
a b  
• The Channel search will start automatically.  
• To exit the Channel search screen, select “Cancel”,  
and then press ENTER.  
Press MENU to exit.  
7
Press MENU to exit.  
4
NOTE  
• If no channel is found, confirm the type of connection made  
with your TV and try EZ Setup again.  
• If you select “Analog Search Start” and initiate the channel  
search, the CH Memory for Cable Digital will be deleted.  
NOTE  
• If no channel is found, confirm the type of connection made  
with your TV and try channel search again.  
• If you select “Analog Search Start” and initiate the channel  
search, the CH Memory for Cable Digital will be deleted.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment settings  
Channel memory setting  
Press  
/
to select “Signal Strength”.  
a b  
3
4
• The signal strength of DIGITAL channel is  
displayed. The signal information is based on the  
current channel.  
Press MENU to display the MENU screen, and  
then press to select “Setup”.  
1
2
/
c d  
Signal Strength  
Press  
/
to select “CH Setup”, and then  
a b  
Channel Strength  
press ENTER.  
• If you already set the Secret No., input the 4-digit  
secret number here. See page 43 for setting a  
secret number.  
Signal Strength  
Current  
0
Max  
0
Press  
/
to select “CH Memory”, and then  
a b  
3
4
press ENTER.  
Press MENU to exit.  
Press  
/
to select ANALOG (Air), ANALOG  
a b  
(Cable), DIGITAL (Air) or DIGITAL (Cable), and  
then press ENTER.  
Channel Strength  
The channel signal strength can also be checked  
separately.  
When viewing ANALOG broadcasts:  
5
Press  
/
to select the channel to skip,  
1
c d  
Repeat steps 1 and 2 in Signal Strength in  
Antenna Setup - DIGITAL.  
and then press  
to move down.  
b
1
Press  
/
to select “On”, and then press  
2
c d  
ENTER.  
Press  
/
to select “Channel Strength”, and  
a b  
2
3
When viewing DIGITAL broadcasts:  
Press to select the channel to skip,  
then press ENTER.  
/
1
a b  
and then press  
/
to select “On”.  
c d  
Input the 2-digit channel number to check the  
signal strength of the selected channel.  
• On: Skips channels. (Channel selection disabled using CH  
.)  
• Make sure the signal is strong enough for each  
channel.  
/
U V  
• Off: Does not skip channels. (Channel selection enabled  
using CH .)  
Signal Strength  
/
U V  
Channel Strength  
1 2 CH  
Press MENU to exit.  
6
Signal Strength  
NOTE  
Current  
0
Max  
0
• Make sure what kind of connection is made with your TV.  
Antenna Setup - DIGITAL  
Press MENU to exit.  
4
In order to receive digital air broadcasts, you need  
a digital broadcast antenna. You can confirm the  
antenna configuration through the “Antenna Setup -  
DIGITAL” screen.  
NOTE  
• This function is available for DIGITAL (Air) only.  
If necessary, adjust the direction of the antenna to  
obtain the maximum signal strength.  
Signal Strength  
Press MENU to display the MENU screen, and  
1
then press  
/
to select “Setup”.  
c d  
Press  
/
to select “Antenna Setup -  
a b  
2
DIGITAL”, and then press ENTER.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment settings  
Using Favorite CH on the menu screen  
You can also set your favorite channels in “Option” on  
the MENU screen.  
Favorite channel setting  
This function allows you to program 4 favorite  
channels, in 4 different categories. By setting the  
favorite channels in advance, you can select your  
favorite channels easily.  
Select the channel you want to register as a  
favorite channel.  
1
Using FAVORITE CH on the remote control unit  
Press MENU to display the MENU screen, and  
2
then press  
/
to select “Option”.  
c d  
Select the channel you want to register as a  
favorite channel.  
1
Press  
/
to select “Favorite CH”, and then  
a b  
3
4
5
press ENTER.  
Press FAVORITE.  
2
Press  
/
to select “Register”, and then  
a b  
press ENTER.  
Press  
/
to select “Register”, and then  
a b  
3
4
press ENTER.  
Press  
/
/
/
to select the position in the  
a b c d  
category, and then press ENTER to register.  
Press  
/
/
/
to select the position in the  
a b c d  
category, and then press ENTER to register.  
Press MENU to exit.  
6
A
B
C
D
Air  
3
Deleting a favorite channel  
Repeat steps 2 and 3 in Using Favorite CH  
on the menu screen.  
1
2
Press  
/
to select “1 Data Clear”, and then  
a b  
press ENTER.  
• To delete all the favorite channels, select “All Data  
Clear”, and then skip to step 4.  
Deleting a favorite channel  
Press  
/
/
/
to select the channel you  
a b c d  
3
4
5
Press FAVORITE and the favorite channel  
want to delete, and then press ENTER.  
1
2
screen displays.  
Press  
/
to select “Yes”, and then press  
c d  
Press  
/
to select “1 Data Clear”, and then  
a b  
ENTER.  
press ENTER.  
• To delete all the favorite channels, select “All Data  
Clear”, and then skip to step 4.  
Press MENU to exit.  
Press  
/
/
/
to select the channel you  
a b c d  
3
want to delete, and then press ENTER.  
A
B
C
D
Air  
Air  
3
18  
Air  
10.1  
Press  
/
to select “Yes”, and then press  
c d  
4
ENTER.  
Yes  
No  
A
B
C
D
Air  
3
Air  
10.1  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment settings  
OPC setting  
Picture adjustments  
Automatically adjusts the brightness of the screen.  
Adjusts the picture to your preference with the  
following picture settings.  
Press MENU to display the MENU screen, and  
then press  
1
/
to select “Picture”.  
c d  
Press MENU to display the MENU screen, and  
1
then press  
/
to select “Picture”.  
c d  
Press  
Press  
/
to select “OPC”.  
a b  
2
3
Press  
item.  
/
to select a specific adjustment  
to adjust the item to the desired  
a b  
2
3
4
/
to select “On” or “On: Display”.  
c d  
Press  
level.  
/
c d  
Selected item  
Off  
Description  
Press MENU to exit.  
The brightness is fixed at the value set in  
“Backlight”.  
On  
Automatically adjusts  
NOTE  
• For resetting all Picture adjustment items to the factory  
preset values, press to select “Reset”, press ENTER,  
On: Display  
Displays the OPC effect on the screen  
while adjusting the brightness of the  
screen.  
/
a b  
press  
/
to select “Yes”, and then press ENTER.  
c d  
Picture  
Audio  
Press MENU to exit.  
4
OPC  
Off  
On  
On : Display  
b16  
Backlight  
Contrast  
Brightness  
Color  
[b12] a16  
NOTE  
[b30]  
0
b40  
b30  
b30  
b30  
b10  
• When set to “On”, the OPC senses the surrounding light  
and automatically adjusts the backlight brightness. Make  
sure nothing obstructs the OPC sensor, which could affect  
its ability to sense surrounding light.  
• When set to “On: Display”, OPC effect displays on the  
screen while the OPC adjusts the screen brightness.  
[
[
[
0] a30  
0] a30  
0] a30  
Tint  
Sharpness [ b2] a10  
Advanced  
Reset  
Selected item  
Backlight  
button  
button  
d
c
The screen dims  
The screen  
brightens  
Contrast  
Brightness  
Color  
For less contrast  
For more contrast  
For less brightness For more brightness  
For less color  
intensity  
For more color  
intensity  
Tint  
Skin tones become Skin tones become  
reddish greenish  
Sharpness  
For less sharpness For more sharpness  
NOTE  
• Select “Advanced” and then press ENTER to set “Color  
Temp.”, “Black”, “3D-Y/C”, “Monochrome”, “Film Mode” or  
“Range of OPC”. See page 28.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment settings  
Advanced picture adjustments  
Monochrome  
This TV provides various advanced functions for  
optimizing the picture quality.  
For viewing a video in monochrome.  
Selected item  
Description  
Press MENU to display the MENU screen, and  
1
On  
Off  
For viewing in monochrome  
Normal color  
then press  
/
to select “Picture”.  
c d  
Press  
/
to select “Advanced”, and then  
a b  
2
3
press ENTER.  
Film Mode (3:2 pull-down)  
Press  
/
to select a specific adjustment  
a b  
Automatically detects a film-based source (originally  
encoded at 24 frames/second), analyzes it then  
recreates each still film frame for high-definition picture  
quality.  
item, and then press ENTER.  
• You can select “Color Temp.”, “Black”, “3D-Y/C”,  
“Monochrome”, “Film Mode” or “Range of OPC”.  
Press  
/
(or  
/
) to select the desired  
a b  
c d  
Selected item  
Description  
Detects, analyzes, converts film source  
Normal viewing mode  
4
5
parameter.  
• See the table for the selectable parameters.  
On  
Off  
Press MENU to exit.  
Range of OPC  
Color Temperature  
The brightness level range of the OPC sensor's  
automatic adjustments can be set according to your  
preferences. The adjustment range of the OPC sensor  
For a better white balance, use color temperature  
correction.  
can be set to a maximum of 16 and a minimum of  
e
Selected item  
Description  
White with Bluish tone  
16.  
f
High  
Selected item  
Max.  
Description  
15 through 16  
Mid-High  
Middle  
Mid-Low  
Low  
f
f
e
White with Reddish tone  
Min.  
16 through 15  
e
Black  
NOTE  
• The range of OPC settings are active only when the OPC is  
set to On.  
• The maximum setting cannot be set to a smaller number  
than the minimum setting.  
Changes the viewing depth by automatically adjusting  
the dark portion of an image for easier viewing.  
Selected item  
Description  
For high detail in black portions  
No adjustment  
• The minimum setting cannot be set to a bigger number  
than the maximum setting.  
• Depending on the brightness of the surrounding light, the  
OPC sensor might not operate if the adjustment range is  
small.  
On  
Off  
3D-Y/C  
Provides high quality images with minimal dot crawl  
and cross color noise.  
Selected item  
Standard  
Fast  
Description  
Normal adjustment  
For moving images  
For still images  
Slow  
NOTE  
• 3D-Y/C is available for input signal from Composite Video  
and analog broadcasts (air and cable).  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment settings  
Sound adjustment  
Surround  
You can adjust the sound quality to your preference  
with the following settings.  
Surround function allows you to enjoy realistic “live” sound.  
Press MENU to display the MENU screen, and  
1
then press  
/
to select “Audio”.  
F G  
Press  
/
to select “Surround”, and then  
D E  
2
press ENTER.  
Treble  
[ 0]  
[ 0]  
[ 0]  
a15  
a15  
L
b15  
b15  
R
Bass  
Balance  
Surround  
Subwoofer  
Reset  
[Off]  
[Off]  
Press MENU to display the MENU screen, and  
1
then press  
/
to select “Audio”.  
F G  
Press  
/
to select “On”, and then press ENTER.  
F G  
Audio  
Power Control  
3
4
Press MENU to exit.  
Treble  
[ 0]  
a15  
b15  
b15  
R
Bass  
[ 0]  
[ 0]  
a15  
Balance  
Surround  
Subwoofer  
Reset  
L
NOTE  
[Off]  
[Off]  
• You can choose Surround by pressing SURROUND on  
the remote control unit. (See page 20.)  
• Audio menu is grayed out when Output Select is set to  
“Variable”.  
• For some discs, setup may be required on your DVD  
player. In this case, please refer to the operation manual of  
your DVD player.  
• When AV MODE is set to “GAME”, the factory preset value  
for Surround is “On”.  
Press  
item.  
/
to select a specific adjustment  
to adjust the item to the desired  
D E  
2
3
Press  
level.  
/
F G  
Subwoofer  
Selected item  
Treble  
button  
button  
G
F
You can enjoy games with stronger bass when  
connecting a subwoofer using the subwoofer terminal.  
For weaker treble  
For weaker bass  
For stronger treble  
For stronger bass  
Press MENU to display the MENU screen, and  
Bass  
1
then press  
/
to select “Audio”.  
F G  
Balance  
Decrease audio from Decrease audio  
Press  
/
to select “Subwoofer”, and then  
D E  
the right speaker  
from the left  
speaker  
2
press ENTER.  
Treble  
[ 0]  
[ 0]  
[ 0]  
a15  
a15  
L
b15  
b15  
R
Press MENU to exit.  
4
Bass  
Balance  
Surround  
Subwoofer  
Reset  
[Off]  
[Off]  
NOTE  
• Audio menu is grayed out when Output Select is set to  
“Variable”.  
• For resetting all Audio adjustment items to the factory  
preset values, press  
/
to select “Reset”, press ENTER,  
D E  
Press  
/
to select “On”, and then press ENTER.  
F G  
press  
/
to select “Yes”, and then press ENTER.  
F G  
3
4
Press MENU to exit.  
NOTE  
• When AV MODE is set to “GAME”, the factory preset value  
for Subwoofer is “On”.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment settings  
Power Control  
Digital Setup  
Power control setting allows you to save energy.  
This setting allows you to optimize the settings of  
Digital broadcasting.  
No signal off  
When set to “Enable”, the power will automatically shut  
down if there is no signal for 15 minutes.  
Audio Setup  
You can output digital audio to an AV amplifier or  
similar device whose DIGITAL AUDIO INPUT terminal  
is connected to the DIGITAL AUDIO OUTPUT terminal  
on the TV. Please select an audio output format  
compatible with the audio format of the program you  
are watching and the equipment connected.  
Press MENU to display the MENU screen, and  
1
then press  
/
to select “Power Control”.  
c d  
Press  
/
to select “No Signal Off”, and then  
a b  
2
3
press ENTER.  
Press MENU to display the MENU screen, and  
then press  
Press to select “Enable”, and then press  
ENTER.  
/
c d  
1
/
to select “Digital Setup”.  
c d  
Press  
/
to select “Audio Setup”, and then  
a b  
2
3
press ENTER.  
Press  
/
to select “PCM” or “Dolby Digital”,  
a b  
Enable  
Disable  
and then press ENTER.  
• Five minutes before the power shuts down, the  
remaining time displays every minute.  
PCM  
Dolby Digital  
Press MENU to exit.  
4
NOTE  
Selected item  
PCM  
Description  
• “Disable” is the factory preset value.  
• When a TV program finishes, this function may not operate.  
The optical output terminal outputs audio  
signal in PCM form. If your digital audio  
system does not support Dolby Digital,  
select “PCM”.  
No operation off  
When set to “Enable”, the power will automatically shut  
down if there is no operation for 3 hours.  
Dolby Digital The optical output terminal outputs audio  
signal in Dolby Digital form. It reproduces  
Press MENU to display the MENU screen, and  
1
then press  
/
to select “Power Control”.  
c d  
sound from surround program of digital.  
Press  
/
to select “No Operation Off”, and  
a b  
Press MENU to exit.  
2
3
4
then press ENTER.  
Press  
ENTER.  
/
to select “Enable”, and then press  
c d  
• Five minutes before the power shuts down, the  
remaining time displays every minute.  
Press MENU to exit.  
4
NOTE  
• “Disable” is the factory preset value.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using external equipment  
Displaying an external equipment  
image  
Input Select  
If the image does not come in clearly from the external  
equipment connected to INPUT 1 or INPUT 7 (DVI) you  
may need to change the input signal type setting on  
the “Input Select” menu.  
To view external source images, select the input  
source from INPUT on the remote control unit or on  
the TV.  
Selecting input signal type (INPUT 1)  
Press MENU to display the MENU screen, and  
1
then press  
/
to select “Option”.  
c d  
Press  
/
to select “Input Select”, and then  
a b  
2
3
press ENTER.  
Option  
Audio Only  
Digital Noise Reduction  
Input Select  
[Off]  
[Auto]  
[Fixed]  
Output Select  
Press  
/
to select the signal type you want  
a b  
to set, and then press ENTER.  
• If the selected signal type is incorrect, images are  
not displayed or displayed without any color.  
Auto  
COMPONENT  
VIDEO  
Press INPUT.  
• A list of selectable sources appears.  
1
INPUT SOURCE  
TV  
INPUT1  
INPUT2  
INPUT3  
INPUT4  
INPUT5  
INPUT6  
Press MENU to exit.  
• The setting is stored and can be selected on the  
“INPUT SOURCE” menu.  
4
NOTE  
• Refer to your external equipment operation manual for the  
signal type.  
• If you set INPUT 1 to Auto, the TV will automatically select  
the input signal.  
• Check the operation manual of the external equipment for  
the signal type.  
7
INPUT7  
• Setting INPUT 1 signal selection to “Auto” when other  
equipment is connected will result in the following  
connection priority.  
Press INPUT again to select the input source.  
• An image from the selected source automatically  
displays.  
• Each time INPUT is pressed, the input source  
toggles.  
2
INPUT 1:  
COMPONENT VIDEO  
VIDEO  
1
2
• You can also select the input source by pressing  
/
.
a b  
• If the corresponding input is not plugged in, you  
cannot change the input. Be sure to connect the  
equipment beforehand.  
NOTE  
• See pages 13 to 16 for external equipment connection.  
• You can toggle INPUT 1 and INPUT 4 by pressing GAME  
on the remote control unit. (See page 13.)  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using external equipment  
DVI input signal setting (INPUT 7)  
Press INPUT to select INPUT 7.  
1
INPUT SOURCE  
TV  
INPUT1  
INPUT2  
INPUT3  
INPUT4  
INPUT5  
6
INPUT6  
7
INPUT7  
Press MENU to display the MENU screen, and  
2
then press  
/
to select “Option”.  
c d  
Press  
/
to select “Input Select”, and then  
a b  
3
press ENTER.  
Option  
Audio Only  
Digital Noise Reduction  
Input Select  
[Off]  
[Auto]  
[Fixed]  
Output Select  
Press  
/
to select the equipment connected  
a b  
4
to INPUT 7 terminal, and then press ENTER.  
Auto  
DIGITAL  
ANALOG  
Press MENU to exit.  
5
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using external equipment  
Press MENU to exit.  
Displaying an image from HDMI  
equipment  
6
NOTE  
To watch an HDMI equipment image, select  
1
• Refer to your external equipment operation manual for the  
signal type.  
• “Audio Select” is only available for INPUT 6.  
• When connecting an HDMI-DVI conversion adapter/cable  
to the HDMI terminal, the image may not come in clearly.  
INPUT4, INPUT 5 or INPUT 6 from “INPUT  
SOURCE” menu using INPUT on the remote  
control unit or on the TV.  
INPUT SOURCE  
TV  
Input Skip  
INPUT1  
INPUT2  
INPUT3  
INPUT4  
INPUT5  
INPUT6  
This setting allows you to skip the HDMI/DVI Input on  
the Input Selection operation.  
Press MENU to display the MENU screen, and  
then press  
1
/
to select “Setup”.  
c d  
Press  
/
to select “Input Skip”, and then  
a b  
2
3
press ENTER.  
7
INPUT7  
Press  
/
to select the Input (INPUT 4,  
a b  
INPUT 5, INPUT 6 or INPUT 7) you wish to  
Press MENU to display the MENU screen, and  
2
skip, and then press ENTER.  
then press  
/
to select “Option”.  
c d  
Input 4 (HDMI)  
Input 5 (HDMI)  
Input 6 (HDMI)  
Press  
/
to select “HDMI Setup”, and then  
a b  
3
press ENTER.  
Input 7 (DVI)  
Audio Only  
Yes  
No  
Digital Noise Reduction  
HDMI Setup  
[Low]  
Output Select  
[Fixed]  
Press  
/
to select “Yes”, and then press  
c d  
Press  
/
to select the desired item, and  
a b  
4
5
ENTER.  
4
5
then press ENTER.  
Press MENU to exit.  
Press  
then press ENTER.  
/
to select the desired setting, and  
c d  
HDMI  
Setup  
items  
Selectable  
items  
Description  
Auto View Enable  
Set whether or not to use  
View Mode based on signal  
recognition, including an HDMI  
signal.  
Disable  
Audio  
Select  
Digital  
Analog  
Select “Digital” for an audio  
signal via the HDMI terminal.  
Select “Analog” for an audio  
signal via the R-AUDIO -L  
terminal.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful adjustment settings  
Auto Sync. adjustment (for Analog  
PC input mode only)  
Fine Sync. adjustment (for DVI  
input mode only)  
For automatically adjusting the PC image.  
Ordinarily you can easily adjust the picture as  
necessary to change image position using Auto Sync.  
In some cases, however, manual adjustment is needed  
to optimize the image.  
Press MENU to display the MENU screen, and  
1
then press  
/
to select “Setup”.  
c d  
Press MENU to display the MENU screen, and  
Press  
/
to select “Auto Sync.”, and then  
a b  
1
then press  
/
to select “Setup”.  
c d  
2
3
press ENTER.  
Press  
/
to select “Fine Sync.”, and then  
a b  
Press  
ENTER.  
/
to select “Yes”, and then press  
c d  
2
3
press ENTER.  
• Auto Sync. starts and “Now adjusting the image.”  
displays.  
Press  
item.  
/
to select the specific adjustment  
a b  
H-Pos.  
[ 90]  
[ 39]  
[ 90]  
[ 20]  
a
a
a
a
b
b
b
b
Yes  
No  
V-Pos.  
Clock  
Phase  
Reset  
Selected item  
H-Pos.  
Description  
30%  
Centers the image by moving it to the left  
or right.  
V-Pos.  
Clock  
Phase  
Centers the image by moving it up or  
down.  
Press MENU to exit.  
4
Adjust when the image flickers with vertical  
stripes.  
NOTE  
Adjust when characters have low contrast  
or when the image flickers.  
• When Auto Sync. is successful, “Completed” displays. If  
not, Auto Sync. failed.  
• Auto Sync. may fail even if “Completed” displays.  
• Auto Sync. may fail if the computer image has low  
resolution, has unclear (black) edges, or is moved while  
executing Auto Sync.  
• Be sure to connect the PC to the TV and switch it on  
before starting Auto Sync.  
Press  
/
to adjust the item to your desired  
c d  
4
position.  
Press MENU to exit.  
5
• It is not necessary to use “Auto Sync.” when a digital signal  
is being input, so it cannot be selected.  
NOTE  
• For resetting all Fine Sync. adjustment items to the factory  
preset values, press  
press ENTER.  
/
to select “Reset”, and then  
a b  
• It is not necessary to adjust the “Clock” or “Phase” when a  
digital signal is being input, so it cannot be selected.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful adjustment settings  
Language setting  
Reset  
You can also select a language from the Setup menu.  
Select from among 3 languages: English, French and  
Spanish.  
If complex adjustments are made and the settings  
cannot be restored to normal, you can reset the  
settings to the factory preset values.  
Press MENU to display the MENU screen, and  
Press MENU to display the MENU screen, and  
1
1
then press  
/
to select “Setup”.  
c d  
then press  
/
to select “Setup”.  
c d  
Press  
/
to select “Language”, and then  
a b  
Press  
/
to select “Reset”, and then press  
a b  
2
3
4
2
press ENTER.  
ENTER.  
• If you already set the Secret No., input the 4-digit  
secret number here. See page 43 for setting a  
secret number.  
• “Return to the factory preset values” displays on  
the screen.  
Press  
/
to select the desired language  
a b  
listed on the screen, and then press ENTER.  
Press MENU to exit.  
Press  
ENTER.  
/
to select “Yes”, and then press  
c d  
3
4
• “Now, TV will restart automatically. OK?” displays  
on the screen.  
Image position  
For adjusting a picture's horizontal and vertical  
position.  
Press  
ENTER.  
/
to select “Yes”, and then press  
c d  
• “Now initializing...” displays on the screen and  
blinks.  
• After the reset has completed, the power shuts  
off and then comes back on. The screen will have  
returned to its original settings.  
Press MENU to display the MENU screen, and  
1
then press  
/
to select “Setup”.  
c d  
Press  
/
to select “Position”, and then  
a b  
2
3
press ENTER.  
Press  
/
to select “H-Pos.” or “V-Pos.”.  
a b  
Example  
Now initializing...  
H-Pos.  
V-Pos.  
[
[
0]  
0]  
a10  
b10  
b20  
a20  
Reset  
NOTE  
Selected item  
H-Pos.  
Description  
• The Channel Setup settings will not be changed.  
• The Language settings will not be changed.  
• The Secret number settings will not be changed.  
Centers the image by moving it to the left  
or right.  
V-Pos.  
Centers the image by moving it up or  
down.  
Press  
/
to adjust the item to the desired  
c d  
4
position.  
Press MENU to exit.  
5
NOTE  
• For resetting adjustments to the factory preset values,  
press  
/
to select “Reset”, and then press ENTER.  
a b  
Adjustments are stored separately according to input  
source.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful adjustment settings  
Input Label  
Sleep Timer  
Lets you set the input terminal displayed when using  
the INPUT SOURCE menu or channel display.  
Allows you to set a time when the TV automatically  
switches to standby.  
Press SLEEP.  
• The remaining time displays when the sleep timer  
has been set.  
1
Sleep Timer: Remaining  
30  
Each time you press SLEEP, the remaining  
2
Press INPUT to select the desired input  
source.  
time switches as shown below.  
1
• When set, the time automatically starts counting  
down.  
• If you want to adjust the sleep timer, you can  
press SLEEP twice then change the time setting.  
• Five minutes before the time expires, the  
remaining time displays every minute.  
Press MENU to display the MENU screen, and  
2
then press  
/
to select “Setup”.  
c d  
Press  
/
to select “Input Label”, and then  
a b  
3
4
press ENTER.  
Off  
30  
60  
120  
90  
Press  
/
/
/
to select the new name for  
a b c d  
the input mode, and then press ENTER.  
NOTE  
Example  
• Select “Off” by pressing SLEEP to cancel the sleep timer.  
• The TV will enter the standby when the remaining time  
reaches zero.  
• When the sleep timer is set, its indicator on the TV lights  
red.  
INPUT SOURCE  
TV  
DVD  
INPUT2  
INPUT3  
INPUT4  
INPUT5  
INPUT6  
7
INPUT7  
Press MENU to exit.  
5
NOTE  
• You cannot change labels if the INPUT SOURCE is TV.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful adjustment settings  
View Mode for 4:3 Programs  
View Mode for HD Programs  
The following modes are available for HD programs.  
Stretch:  
Suitable for viewing wide-screen 1.78:1 aspect ratio  
program, stretch mode will still show very thin black  
bands at the top and bottom of the screen.  
Dot by Dot (1080i/p only):  
Detects the resolution of the signal and displays an  
image with the same number of pixels on the screen.  
Press VIEW MODE.  
1
• The View Mode menu displays.  
Full Screen (720p only):  
You can select "Full Screen" only when receiving a  
720p signal.  
• The menu lists the View Mode options selectable  
for the type of video signal currently being  
received.  
S.Stretch (Smart stretch):  
Suitable for stretching 4:3 programs to fill the screen.  
View Mode  
Side Bar  
S. Stretch  
Zoom  
Zoom:  
Suitable for viewing wide-screen 2.35:1 aspect-ratio  
programs in full screen.  
NOTE  
Stretch  
• When using Dot by Dot, it is possible to see noise or  
bars around different outer portions of the screen. Please  
change view mode to correct this.  
Press VIEW MODE or  
Mode menu is displayed to select a desired  
item on the menu .  
/
while the View  
D E  
2
• You can sequentially select a View Mode that has  
its own aspect ratio.  
Side Bar:  
Suitable for viewing conventional  
4:3 programs in their normal  
format.  
S.Stretch (Smart stretch):  
Suitable for stretching 4:3  
programs to fill the screen.  
Zoom:  
Suitable for viewing wide-screen  
2.35:1 anamorphic DVDs in full  
screen.  
Stretch:  
This mode is useful for 1.78:1  
DVDs.  
When viewing 1.85:1 DVDs, stretch  
mode will still show very thin black  
bands at the top and bottom of the  
screen.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful adjustment settings  
View Mode (for PC input mode)  
You can select the screen size.  
NOTE  
• Connect the PC before making adjustments. (See page  
16.)  
• Selectable screen size may vary with input signal type.  
Press VIEW MODE.  
1
• The View Mode menu displays.  
Example  
View Mode  
Normal  
Zoom  
Stretch  
Dot by Dot  
Press VIEW MODE or  
Mode menu is displayed to select a desired  
item on the menu.  
/
while the View  
D E  
2
Example: Screen size images  
Input signal  
Normal  
Zoom  
Stretch  
Dot by Dot  
4:3  
Keeps the original  
aspect ratio in a full  
screen display.  
For viewing wide-  
An image fully fills the Detects the resolution  
screen programs. The screen.  
top and bottom of the  
image is cropped.  
of the signal and  
displays an image  
with the same  
number of pixels on  
the screen.  
Input signal  
Stretch  
Dot by Dot  
16:9  
An image fully fills the Detects the resolution  
screen.  
of the signal and  
displays an image  
with the same  
number of pixels on  
the screen.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful adjustment settings  
Output Select  
Advanced Option settings  
Allows you to select what controls the audio output.  
Perform the following steps to set the Option menu  
items on this page.  
Selected item  
Fixed  
Description  
• Sound via speaker is adjusted with  
VOL  
/
on the remote control  
k l  
unit or VOL  
/
on the TV.  
l k  
• Sound via the AUDIO OUTPUT  
terminal is not adjustable and  
outputs at a consistent level.  
Variable  
• Sound via the AUDIO OUTPUT  
terminal is adjusted with VOL  
/
k l  
on the remote control unit or VOL  
on the TV.  
Press MENU to display the MENU screen, and  
/
l k  
1
then press  
/
to select “Option”.  
c d  
• Sound via speaker is muted.  
Press  
/
to select a specific adjustment  
a b  
2
3
4
item, and then press ENTER.  
Color System  
Select the video signal system compatible with your  
Press  
/
(or  
/
) to select the desired  
a b  
c d  
equipment from the list below;  
— Auto  
setting, and then press ENTER.  
— NTSC  
Press MENU to exit.  
• Skip this step for “Audio Only”.  
— PAL-M  
— PAL-N  
NOTE  
Audio Only  
• “Color System” can only be set for the INPUT 1 VIDEO and  
INPUT 2.  
When listening to music from a music program, you  
can set the screen off and enjoy audio only.  
Program Title Display  
Selected item  
Description  
Select the CH display when changing channels for  
digital broadcasting.  
On  
Off  
Audio is output without screen image.  
Both screen images and audio are output.  
Selected item  
Description  
“Program Info.” displays  
“Program Info.” does not display  
NOTE  
Yes  
No  
• The screen image will return to normal when a button  
(except those for audio adjustment, such as VOL, MUTE,  
SURROUND, AUDIO) is pressed.  
Digital Noise Reduction  
Produces a clearer video image.  
Selected item  
Description  
Off  
No adjustment  
High  
Low  
For enhanced Digital Noise Reduction  
For moderate Digital Noise Reduction  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful adjustment settings  
AV MODE  
Selected item  
GAME  
Description  
Lowers image brightness for easier viewing  
[Enhanced Picture Contrast: off]  
AV MODE gives you 7 viewing options to choose from  
to best match the surrounding environment of the TV,  
which can vary due to factors like room brightness,  
type of program watched or the type of image input  
from external equipment.  
STANDARD  
For a highly defined image in a normal  
lighting  
[Enhanced Picture Contrast: on]  
MOVIE  
PC  
For a movie  
[Enhanced Picture Contrast: off]  
For PC  
[Enhanced Picture Contrast: off]  
Press AV MODE.  
1
USER  
Allows the user to customize settings as  
desired. You can set the mode for each  
input source.  
• Current AV MODE displays.  
[Enhanced Picture Contrast: off]  
Press AV MODE again before the mode  
2
displayed on the screen disappears.  
DYNAMIC  
(Fixed)  
Changes the image and sound settings to  
the factory preset values. No adjustments  
are allowed.  
• The mode changes as shown below.  
When the input source is TV, INPUT 1, 2 or 3 terminals  
(Example)  
[Enhanced Picture Contrast: on]  
DYNAMIC  
For a clear-cut image emphasizing high  
contrast, useful for sports viewing  
[Enhanced Picture Contrast: on]  
AV MODE: STANDARD  
AV MODE: MOVIE  
AV MODE: GAME  
AV MODE: USER [TV]  
Input Signal (for PC input mode)  
AV MODE: DYNAMIC  
Some input signals may have to be registered manually  
to display properly.  
The pair of input signals (resolutions) in the list below  
are not distinguishable when received. In such case,  
you have to set the correct signal manually. After  
setting once, it will display when the same signal  
(resolution) is input again.  
AV MODE: DYNAMIC (Fixed)  
When the input source is INPUT 4, 5, 6 or 7 terminals  
(Example)  
1024 768  
1360 768  
J
J
AV MODE: STANDARD  
AV MODE: MOVIE  
AV MODE: GAME  
AV MODE: PC  
NOTE  
AV MODE: DYNAMIC  
• You can only select the “Input Signal” on the Setup menu  
when receiving one of the 2 input signals listed above.  
AV MODE: DYNAMIC (Fixed)  
Press MENU to display the MENU screen, and  
then press  
1
/
to select “Setup”.  
F G  
AV MODE: USER [  
]
Press  
/
to select “Input Signal”, and then  
D E  
2
press ENTER.  
NOTE  
• You can select a different AV MODE item for each input  
mode. (For example, select STANDARD for TV input and  
GAME for INPUT 1.)  
• When the input source is INPUT 1 or INPUT 4, the factory  
preset value for AV MODE is “GAME”.  
• “Enhanced Picture Contrast” technology detects the source  
video characteristics and smoothly adjusts the screen  
brightness accordingly to realize deeper black levels.  
Press  
/
to select the desired input signal  
D E  
3
4
on the display.  
Press MENU to exit.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful adjustment settings  
Press CC.  
Closed Captions and Digital Closed  
Captions  
1
2
• This will present the Closed Caption information  
display.  
Your TV is equipped with an internal Closed Caption  
decoder. It allows you to view conversations, narration  
and sound effects as subtitles on your TV. Closed  
Captions are available on some TV programs and on  
some VHS home video tapes at the discretion of the  
program provider.  
Press CC while the Closed Caption information  
is still on the screen.  
• Press repeatedly until you select the desired  
closed caption service.  
Air  
ANALOG  
Digital Closed Caption service is a new caption service  
available only on digital TV programs (also at the  
discretion of the service provider). It is a more flexible  
system than the original Closed Caption system,  
because it allows for a variety of caption sizes and font  
styles. When the Digital Closed Caption service is in  
use, it will be indicated by the appearance of a 3-letter  
abbreviation that also indicates the language of the  
Digital Closed Captions: ENG (English), SPA (Spanish),  
FRA (French) or other language codes.  
2
Audio  
CC  
:
:
MONO  
1/2 CC1  
Closed Caption  
information  
• Depending on the number of caption services in  
the signal being received, you will see information  
such as 1/2 or 1/4 displayed.  
1/2 means “the first of two services”.  
Example:  
If a program has three services (Digital CC(ENG),  
CC1 and Text1), the closed caption display will  
toggle in this sequence:  
Not all programs and VHS videotapes offer closed  
captions. Please look for the “  
that captions will be shown.  
” symbol to ensure  
1
1/3 ENG  
2/3 CC1  
3/3 Text1  
OFF  
• The CC button keeps a record of the last service  
selected in its memory.  
In the Closed Caption system, there can be more than  
one caption service provided. Each is identified by its  
own number. The “CC1” and “CC2” services display  
subtitles of TV programs superimposed over the  
program's picture.  
If the last closed caption mode (e.g. 1/3ENG) you  
selected is not available for the next program, or  
on another channel, the closed caption service  
that is available is automatically selected, and this  
service appears in parentheses, e.g. “1/3(CC1)”.  
Closed Caption services that appear in  
parentheses will not be stored in the CC button's  
memory as your last selected service. Only  
services that you have selected with the CC  
button are stored.  
In the Closed Caption system, the “Text1” or “Text2”  
services display text that is unrelated to the program  
being viewed (e.g., weather or news). These services  
are also superimposed over the program currently  
being viewed.  
Examples:  
In a case where there are two closed caption  
services provided, (for instance, Digital  
CC(ENG) and CC1), and Digital CC(ENG)  
is displayed as your current selection, if  
Digital CC(ENG) is not broadcast for the next  
program, the other closed caption service,  
CC1, will be displayed in parentheses.  
A closed caption service appears in  
parentheses because the service you selected  
is not available and a different service is  
displayed on your screen. “1/1(CC1)” is  
displayed instead of “1/2/ENG”.  
NOTE  
• See page 42 for detailed closed caption settings.  
• When the program contains no closed caption, “--”  
displays in the closed caption information.  
• If the language code, e.g. “ENG”, is not found on Digital TV  
programs, “--” will be shown.  
• Four kinds of closed caption service (CC1, CC2, Text1,  
Text2) are potentially available, but a broadcast may contain  
none or only some of these services at the discretion of the  
program provider.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful adjustment settings  
NOTE  
Caption Setup  
• For resetting adjustments to the factory preset values,  
This function allows you to adjust the closed caption  
screen appearance to suit your preference.  
press  
/
to select “Reset”, and then press ENTER.  
a b  
• The default value depends on the broadcasting station.  
Press MENU to display the MENU screen, and  
1
Selectable items available for “Font Style”.  
then press  
/
to select “Option”.  
c d  
Selected item  
Default  
Description  
Press  
/
to select “Caption Setup”, and  
a b  
2
3
then press ENTER.  
The font specified by broadcasting station  
or default font.  
Press  
item.  
/
to select a specific adjustment  
a b  
Type 0  
Proportional font used in the MENU  
screen.  
• You can adjust 7 items here; they are,  
“Caption Size”,  
“Font Style”,  
1
2
3
4
5
6
7
Type 1  
Type 2  
Type 3  
Type 4  
Type 5  
Type 6  
Type 7  
Monospaced with serifs.  
Proportionally spaced with serifs.  
Monospaced without serifs.  
Proportionally spaced without serifs.  
Casual font type.  
“Foreground Color”,  
“Foreground Opacity”,  
“Background Color”,  
“Background Opacity” and  
“Character Edge”.  
Cursive font type.  
Caption Size  
Font Style  
Default  
Default  
Default  
Default  
Default  
Default  
Default  
Small capitals.  
Foreground Color  
Foreground Opacity  
A B C  
123  
Background Color  
Background Opacity  
Character Edge  
Reset  
Press  
/
to select the desired parameter.  
c d  
4
5
Press MENU to exit.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful adjustment settings  
Input the same 4-digit number on the  
Secret number setting for parental  
control  
5
“Reconfirm” screen as in step 4 to confirm.  
New Secret No.  
Secret No. Clear  
Allows you to use a secret number to protect certain  
settings from being accidentally changed.  
Input Secret No.  
New Secret No.  
Reconfirm  
a a a a  
*
*
*
*
IMPORTANT:  
Three conditions must be met to enable the V-Chip (see  
pages 43 to 48):  
a a a a  
Secret No. is registered.  
V-Chip/V-Chip (DTV Only) settings have been  
made.  
1
2
Press RETURN to start configuring the V-Chip  
6
7
settings. (See pages 46 and 48 for details.)  
“Status” is set to “On”.  
3
Press MENU to exit.  
Setting a secret number  
Press MENU to display the MENU screen,  
and then press to select “Setup”.  
1
2
3
/
c d  
Setting parental control status  
Used to enable or disable the parental control function.  
Press  
/
to select “Parental CTRL”, and  
a b  
then press ENTER.  
Repeat steps 1 and 2 in Setting a secret  
number.  
1
Press  
/
to select “Secret No.”, and then  
a b  
• The secret number setting menu displays.  
press ENTER.  
V-Chip  
Input the 4-digit secret number by using 09.  
2
V-Chip (DTV Only)  
Secret No.  
Status  
Press  
/
to select “Status”, and then press  
to select “On” or “Off”, and then  
a b  
3
4
ENTER.  
Press  
/
c d  
press ENTER.  
• Select “On” to enable and “Off” to disable Parental  
CTRL.  
Select “New Secret No.”, and then press  
ENTER.  
4
V-Chip  
Input the new 4-digit secret number by using  
V-Chip (DTV Only)  
Secret No.  
Status  
09.  
New Secret No.  
Secret No. Clear  
On  
Off  
a a a a  
Input Secret No.  
a a a a  
New Secret No.  
a a a a  
Reconfirm  
Press MENU to exit.  
5
NOTE  
• You can skip steps 1 and 2 above while in the Parental  
CTRL screen.  
• The “V-Chip (DTV Only)” will only be selectable when a new  
rating system can be downloaded via digital broadcasting  
in the U.S.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful adjustment settings  
Changing the secret number  
Clearing the secret number  
Allows you to change your current secret number.  
Allows you to clear your secret number.  
Repeat steps 1 and 2 in Setting a secret  
number.  
Repeat steps 1 and 2 in Setting a secret  
number.  
1
1
• The secret number setting menu displays.  
• The secret number setting menu displays.  
Input the 4-digit secret number by using 09.  
Input the 4-digit secret number by using 09.  
2
2
Press  
/
to select “Secret No.”, and then  
Press  
/
to select “Secret No.”, and then  
a b  
a b  
3
4
5
3
4
5
press ENTER.  
press ENTER.  
Press  
then press ENTER.  
/
to select “New Secret No.”, and  
Press  
then press ENTER.  
/
to select “Secret No. Clear”, and  
a b  
a b  
Input the old 4-digit secret number by using  
09.  
Press  
ENTER.  
/
to select “Yes”, and then press  
c d  
• Your secret number is cleared.  
New Secret No.  
New Secret No.  
Secret No. Clear  
Secret No. Clear  
a a a a  
Input Secret No.  
a a a a  
New Secret No.  
a a a a  
Reconfirm  
Yes  
No  
Input the new 4-digit secret number by using  
6
7
09.  
Press MENU to exit.  
6
New Secret No.  
Secret No. Clear  
a a a a  
Input Secret No.  
NOTE  
a a a a  
New Secret No.  
• See page 43 for re-registering a new secret number after  
being cleared.  
As a precautionary measure, make a note of your  
secret number and keep it in a familiar place.  
• If the secret number is cleared, the Status setting  
automatically sets to “Off”. “V-Chip” and “Status” will not  
be selectable from the menu.  
a a a a  
Reconfirm  
Input the same 4-digit number on the  
“Reconfirm” screen as in step 6 to confirm.  
New Secret No.  
Secret No. Clear  
Input Secret No.  
New Secret No.  
Reconfirm  
a a a a  
*
*
*
*
a a a a  
Press MENU to exit.  
8
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful adjustment settings  
Parental control (setting V-CHIP level)  
V-CHIP is an electronic filtering device built into your TV. This tool gives parents a great degree of control over  
broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while  
blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your TV.  
“V-Chip” and “Status” will not be selectable from the menu if you do not first configure your secret  
number. (See page 43 for Secret number setting for parental control.)  
• The U.S. has two rating systems for viewing content: TV Parental Guidelines and movie ratings.  
• The TV Parental Guidelines work in conjunction with the V-CHIP to help parents screen out inappropriate  
television shows from their children.  
• Movie ratings are used for original movies rated by the Motion Picture Association of America (MPAA) as  
watched on cable TV and not edited for television. The V-CHIP can also be set to block MPAA-rated movies.  
Voluntary movie rating system (MPAA)  
Rating  
Description  
G
General audiences. All ages admitted.  
PG  
Parental guidance suggested. Some material may not be suitable for children.  
PG-13  
R
Parents strongly cautioned. Some material may be inappropriate for children under 13.  
Age  
Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some  
jurisdictions).  
NC-17  
X
No one 17 and under admitted.  
X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.  
MPAA  
a
TV Guidelines  
G
• If you select “PG-13”, this will automatically block the higher  
Can. English Ratings  
Can. French Ratings  
PG  
ratings “R”, “NC-17” and “X”.  
PG-13  
R
NOTE  
NC-17  
X
• Voluntary movie rating system only uses an age-based rating.  
NONE  
TV Parental Guidelines  
Content  
FV  
(Fantasy  
violence)  
V
S
L
D
Rating  
(Violence)  
(Sexual  
situation)  
(Adult  
(Sexually  
language) suggestive  
dialog)  
TV-Y (All children)  
z
z
z
z
z
z
z
z
z
TV-Y7 (Directed to older children)  
TV-G (General audience)  
g
Suggested  
age  
z
z
g
g
g
z
g
g
g
z
g
g
TV-PG (Parental Guidance suggested)  
TV-14 (Parents strongly cautioned)  
TV-MA (Mature audience only)  
g
g
g
: The content rating can be set, but this rating is not normally broadcast by TV stations.  
z
: Content rating can be set.  
g
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful adjustment settings  
Voluntary movie rating system (MPAA)  
TV Parental Guidelines (TV Guidelines)  
Press MENU to display the MENU screen, and  
Repeat steps 1 to 4 in Voluntary movie  
rating system (MPAA).  
1
1
then press  
/
to select “Setup”.  
F G  
Press  
/
to select “Parental CTRL”, and  
Press  
/
to select “TV Guidelines”, and  
D E  
D E  
2
2
3
then press ENTER.  
then press ENTER.  
• The secret number setting menu displays only  
when “Secret No.” is set. (See page 43.)  
• “V-Chip” and “Status” will not be selectable from  
the menu if you do not first configure your secret  
number. (See page 43.)  
Press  
/
to adjust the item to your desired  
D E  
position. “ ” indicates the item is blocked.  
• The setting automatically enters “Block” for any  
ratings below your selection.  
Example  
Input the 4-digit secret number by using 09.  
3
4
MPAA  
TV Guidelines  
TV-Y  
Can. English Ratings  
Can. French Ratings  
Press  
/
to select “V-Chip”, and then press  
TV-Y7  
TV-G  
D
L
D E  
ENTER.  
TV-PG  
TV-14  
TV-MA  
NONE  
S
V-Chip  
V
V-Chip (DTV Only)  
Secret No.  
Status  
FV  
When setting an individual content-based  
rating item, do as follows:  
Press  
or ENTER to access blocked  
G
content items from the currently selected  
age-based rating item.  
Press  
/
to select “MPAA”, and then press  
to adjust the item to your desired  
D E  
5
6
ENTER.  
Press  
/
to select an individual item,  
D E  
and then press ENTER to unblock it (“ ”  
is removed). Repeat the same steps for the  
other items.  
Press  
/
D E  
position. “ ” indicates the item is blocked.  
Press RETURN.  
• The setting automatically enters “Block” for any  
ratings below your selection.  
• If Status is not set to “On”, the configuration  
settings will not work. (See page 43.)  
Press  
or RETURN to register after all  
ꢂꢃ  
F
individual content rating items are set.  
Example  
MPAA  
TV Guidelines  
TV-Y  
Example  
Can. English Ratings  
Can. French Ratings  
TV-Y7  
TV-G  
D
L
MPAA  
TV Guidelines  
G
TV-PG  
TV-14  
TV-MA  
NONE  
S
Can. English Ratings  
Can. French Ratings  
PG  
V
PG-13  
R
FV  
NC-17  
X
• If Status is not set to “On”, the configuration  
settings will not work. (See page 43.)  
NONE  
Press MENU to exit.  
Press MENU to exit.  
4
7
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful adjustment settings  
Canadian Rating Systems  
• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications  
Commission (CRTC) policy on violence in television programming.  
• While violence is the most important content element to be rated, the structure developed takes into  
consideration other program content like language, nudity, sexuality and mature themes.  
• When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the  
Canadian French ratings.  
Canadian English ratings  
Rating  
Description  
E
Exempt: Includes news, sports, documentaries and other information programming; talk shows,  
music videos, and variety programming.  
C
Children: Intended for younger children under the age of 8 years. Pays careful attention to themes  
that could threaten their sense of security and well-being.  
C8  
Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable, or only  
way to resolve conflict; nor encourage children to imitate dangerous acts which they may see on  
the screen.  
e
Age  
G
General: Considered acceptable for all age groups. Appropriate viewing for the entire family,  
contains very little violence, physical, verbal or emotional.  
PG  
Parental Guidance: Intended for a general audience, but may not be suitable for younger children  
(under the age of 8) because it could contain controversial themes or issues.  
14  
18  
Over 14 Years: Could contain themes where violence is one of the dominant elements of the  
storyline, but it must be integral to the development of plot or character. Language usage could  
be profane and nudity present within the context of the theme.  
e
e
Adults: Intended for viewers 18 years and older and might contain depictions of violence, which  
while related to the development of plot, character or themes, are intended for adult viewing.  
Could contain graphic language and portrayals of sex and nudity.  
Canadian French ratings  
Rating  
Description  
E
Exempt programming.  
G
General: All ages and children, contains minimal direct violence, but may be integrated into the  
plot in a humorous or unrealistic manner.  
8ans  
General but inadvisable for young children: May be viewed by a wide public audience, but could  
contain scenes disturbing to children under 8 who cannot distinguish between imaginary and real  
situations. Recommended for viewing with parent.  
e
Age  
13ans  
Over 13 years: Could contain scenes of frequent violent scenes and therefore recommended for  
viewing with parent.  
e
16ans  
18ans  
Over 16 years: Could contain frequent violent scenes and intense violence.  
e
Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme violence.  
e
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful adjustment settings  
Canadian English ratings  
Canadian French ratings  
Press MENU to display the MENU screen, and  
Repeat steps 1 to 4 in Canadian English  
ratings.  
1
1
2
then press  
/
to select “Setup”.  
c d  
Press  
/
to select “Parental CTRL”, and  
Press  
/
to select “Can. French Ratings”,  
a b  
a b  
2
then press ENTER.  
and then press ENTER.  
• Secret number setting menu displays only when  
“Secret No.” is set. (See page 43.)  
• “V-Chip” and “Status” will not be selectable from  
the menu if you do not first configure your secret  
number. (See page 43.)  
Press  
/
to adjust the item to your desired  
a b  
3
position. “ ” indicates the item is blocked.  
• The setting automatically enters “Block” for any  
ratings below your selection.  
• If Status is not set to “On” the configuration  
settings will not work. (See page 43.)  
Input the 4-digit secret number by using 09.  
3
4
Setup  
Option  
Example  
MPAA  
Secret No.  
a a a a  
TV Guidelines  
E
Can. English Ratings  
Can. French Ratings  
G
Press  
/
to select “V-Chip”, and then press  
a b  
8ans+  
13ans+  
16ans+  
18ans+  
NONE  
ENTER.  
V-Chip  
V-Chip (DTV Only)  
Secret No.  
Status  
Press MENU to exit.  
4
How to temporarily release the  
V-CHIP BLOCK  
Press  
/
to select “Can. English Ratings”,  
a b  
5
6
and then press ENTER.  
When the V-CHIP BLOCK is working and censors a  
broadcast, “V-CHIP HAS BEEN ACTIVATED.” displays.  
Press  
/
to adjust the item to your desired  
a b  
position. “ ” indicates the item is blocked.  
Press ENTER while the V-CHIP is working, and  
then the secret number setting menu displays.  
1
• The setting automatically enters “Block” for any  
ratings below your selection.  
• If Status is not set to “On” the configuration  
settings will not work. (See page 43.)  
Input the 4-digit secret number by using  
2
09. At this time V-CHIP BLOCK temporarily  
Example  
releases.  
MPAA  
E
TV Guidelines  
C
Can. English Ratings  
Can. French Ratings  
Reactivating the temporarily  
released V-CHIP BLOCK  
C8+  
G
PG  
14+  
18+  
NONE  
You can reactivate the temporarily released V-CHIP  
BLOCK as shown below.  
Method 1:  
Press MENU to exit.  
Select “Status” setting from the Parental CTRL menu  
to reactivate BLOCK. (See page 43.)  
7
Method 2:  
Select “V-Chip” setting (“MPAA”, “TV Guidelines”,  
“Can. English Ratings” or “Can. French Ratings”)  
from the Parental CTRL to reactivate BLOCK. (See  
pages 46 and 48.)  
Method 3:  
Switch off the TV power.  
NOTE  
• Performing any of the three above will activate the V-CHIP  
BLOCK.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other viewing options  
Freezing images  
Presetting remote control function  
Allows you to capture and freeze a moving image that  
you are watching.  
You can operate the connected AV products (AV  
Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD)  
using the presetting manufacturer function of your  
remote control unit.  
Press FREEZE.  
1
• A moving image is captured.  
Press FREEZE again to cancel the function.  
2
NOTE  
• When this function is not available, “No displaying still  
image available.” will display.  
Presetting manufacturer codes  
• The still image automatically goes out after 30 minutes.  
• If you are using the freeze function and a broadcast  
activates the V-CHIP BLOCK, the freeze function will be  
cancelled and a V-CHIP BLOCK message will appear.  
Press FUNCTION until the LED for your  
1
device lights up.  
After the LED for your device lights up, press  
FUNCTION and DISPLAY at the same time  
to enter the code registration mode. The LED  
will blink.  
2
Press 0–9 to enter the manufacturer code. (See  
page 50.)  
3
• Preset mode is finished once the LED no longer  
lights up.  
After registering the code, the LED will stop  
4
blinking then turn off after one second. (If you  
perform an incorrect operation, the LED will  
blink quickly then turn off.)  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other viewing options  
Manufacturer codes  
REMOTE CONTROL CODE  
NUMBER  
REMOTE CONTROL CODE  
NUMBER  
VCR BRAND  
DVD/LD BRAND  
REMOTE CONTROL CODE  
NUMBER  
CATV/SAT BRAND  
NOTE  
• Numbers marked with * are SAT codes, all others are  
CATV codes.  
REMOTE CONTROL CODE  
AUDIO BRAND  
NUMBER  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other viewing options  
Cable control buttons  
When the FUNCTION is set to CBL/SAT, the cable converter connected to  
the TV can be operated using 1 to 4.  
1
2
1
2
SOURCE POWER  
Turns the cable converter power on and off.  
0–9  
Press a button (or buttons) that corresponds to the channel that you wish  
to watch.  
3
4
FLASHBACK *  
Press to switch between the current channel and the channel you were  
watching immediately before.  
3
4
CH  
/
U V  
Press CH  
or CH  
to tune in a higher or lower channel.  
Vꢀ  
U
* Some manufacturers do not preset FLASHBACK.  
NOTE  
• CABLE and SAT cannot be selected at the same time.  
SAT control buttons  
1
SOURCE POWER  
Turns the cable converter power on and off.  
0–9, (DOT)  
Press a button (or buttons) that corresponds to the channel that you wish  
to watch.  
1
2
2
3
ENTER,  
/
/
/
a b c d  
ENTER: Press to activate the selected function.  
/
/
/
: Press the button to select items on the SAT GUIDE screen  
or SAT MENU screen.  
a b c d  
NOTE  
• CABLE and SAT cannot be selected at the same time.  
3
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other viewing options  
8
VCR control buttons  
The remote control unit button will function as follows when the FUNCTION  
of the remote control unit is set to VCR.  
• Press INPUT until the input connected to the VCR is selected. The following 1 to 8  
can be used to control the VCR.  
1
2
3
4
5
6
7
8
CH  
/
U V  
2
4
7
3
5
Press to select the channel of the TV tuner on the VCR.  
SOURCE POWER  
Turns the power of the VCR on and off.  
6
)
Sets pauses and still pictures.  
*
Rewinds the tape and allows picture search.  
+
Stops the tape transport.  
1
REC  
Starts recording.  
-
Rapidly advances the tape and allows picture search.  
,
Starts playback.  
DVD control buttons  
3
10  
The remote control unit button will function as follows when the FUNCTION  
of the remote control unit is set to DVD.  
• Press INPUT until the input connected to the DVD player is selected. The following 1  
to 10 can be used to control the DVD player.  
1
/
5
6
2
1
9
4
Pressing quickly once takes you to the start of the next chapter. Each time you  
press it, you move ahead to the start of the next chapter.  
2
.
Pressing quickly once takes you to the start of the chapter currently playing.  
Each time you press it, you move back to the start of the previous chapter.  
3
4
5
6
SOURCE POWER  
Turns the power of the DVD player on and off.  
)
Sets pauses and still pictures.  
*
Hold down to go in reverse.  
7
+
Playback stops when pressed.  
8
With some DVD players, pressing the button twice may open the disc tray.  
7
8
MENU  
When this button is pressed, the DVD menu will display.  
ENTER, a/b/c/d  
ENTER: Press to activate the selected function.  
a/b/c/d: Press the button to select items on the DVD  
MENU screen.  
9
-
Hold down to fast forward.  
10 ,  
Starts playback.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Removing the stand  
Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal.  
CAUTION  
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.  
Before attaching/detaching stand  
• Before performing work make sure to turn off the TV.  
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being  
damaged.  
1
2
Hex key  
Unfasten the four screws used to secure the stand in  
place.  
Detach the stand from the TV. (Hold the stand so it  
will not drop from the edge of the base area.)  
NOTE  
• To attach the stand, perform the above steps in reverse order.  
Setting the TV on the wall  
CAUTION  
• This TV should be mounted on the wall only with the AN-37AG2 (SHARP) wall mount bracket. The use of other wall  
mount brackets may result in an unstable installation and may cause serious injuries.  
• Installing the TV requires special skill that should only be performed by qualified service personnel. Customers  
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting  
that results in accident or injury.  
Using an optional bracket to mount the TV  
You can ask a qualified service professional about using an optional AN-37AG2 bracket to mount the TV to the wall.  
• Carefully read the instructions that come with the bracket before beginning work.  
About setting the TV angle  
Hanging on the wall  
AN-37AG2 wall mount bracket.  
(See the bracket instructions for details.)  
Model  
LC-32GP1U  
LC-37GP1U  
Angle of TV  
0/5/10°  
0/5/10°  
Angular mounting  
Vertical mounting  
NOTE  
• Detach the cable clamps on the rear of the TV when using the optional mount bracket.  
• Due to the terminal configuration on this TV, when you wall-mount this model, make sure there is enough space between the  
wall and the TV for the cables.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Troubleshooting  
Problem  
Possible Solution  
• No power  
• Check if you pressed TV POWER on the remote control unit. (See page 17.) If the  
indicator on the TV does not light up, press POWER on the TV.  
• Is the AC cord disconnected? (See page 7.)  
• Has the power been turned on? (See page 17.)  
• Unit cannot be operated.  
• External influences such as lightning, static electricity, may cause improper operation.  
In this case, operate the unit after first turning on the power of the TV or unplugging  
the AC cord and replugging it in after 1 or 2 minutes.  
• Remote control unit does not  
operate.  
• Is the FUNCTION set correctly? Set it to the TV setting position.  
• Are batteries inserted with polarity ( ) aligned? (See page 8.)  
,
e f  
• Are batteries worn out? (Replace with new batteries.)  
• Are you using it under strong or fluorescent lighting?  
• Is a fluorescent light illuminated near the remote control sensor?  
• Picture is cut off/with sidebar  
screen.  
• Is the image position correct? (See page 35.)  
• Are screen mode adjustments such as picture size made correctly? (See pages 37  
and 38.)  
• Strange color, light color, or color • Adjust the picture tone. (See pages 27 and 28.)  
misalignment  
• Is the room too bright? The picture may look dark in a room that is too bright.  
• Check the input signal setting. (See page 40.)  
• Power is suddenly turned off.  
• Is the sleep timer set? (See page 36.)  
• Check the power control settings. (See page 30.)  
• The unit's internal temperature has increased. Remove any objects blocking vent or  
clean.  
• No picture  
• No sound  
• Is connection to other components correct? (See pages 13 to 16.)  
• Is correct input signal source selected after connection? (See page 31.)  
• Is the correct input selected? (See pages 31 and 32.)  
• Is picture adjustment correct? (See pages 27 and 28.)  
• Is “On” selected in “Audio Only”? (See page 39.)  
• Is a non-compatible signal being input? (See page 16.)  
• Is the volume too low? (See page 20.)  
• Is “Variable” selected in “Output Select”? (See page 39.)  
• Have you pressed MUTE on the remote control unit? (See page 20.)  
• Is “On” selected in “Subwoofer”? (See page 29.)  
Troubleshooting-Digital broadcasting  
The error message about reception of broadcast  
The example of an error message  
Error code  
Possible Solution  
displayed on a screen  
• Check the antenna cable. Check that the antenna is correctly  
setup.  
• Failed to receive broadcast.  
• No broadcast now.  
E202  
E203  
• Check the broadcast time in the program guide.  
Cautions regarding use in high and low temperature environments  
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.  
This is not a malfunction, and the unit will recover when the temperature returns to normal.  
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a  
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.  
Storage temperature: 4°F to 140°F ( 20°C to 60°C)  
f
e
f
e
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Specifications  
Item  
Model: LC-32GP1U  
Model: LC-37GP1U  
LCD panel  
32 Advanced Super View & BLACK TFT 37 Advanced Super View & BLACK TFT  
R
R
LCD  
LCD  
6,220,800 dots (1920  
1080  
3 dots)  
J
J
Number of dots  
TV  
Function  
TV-standard (CCIR)  
American TV Standard ATSC/NTSC System  
VHF 2-13ch, UHF 14-69ch  
Receiving  
Channel  
VHF/UHF  
CATV  
1-135ch (non-scrambled channel only)  
Digital Terrestrial  
Broadcast (8VSB)  
2-69ch  
Digital cable*1  
(64/256 QAM)  
1-135ch (non-scrambled channel only)  
Audio multiplex  
BTSC System  
Backlight  
Audio out  
Terminals  
60,000 hours (at Backlight Standard position)  
10W  
2
J
Side  
Rear  
INPUT 1  
INPUT 4  
INPUT 2  
INPUT 3  
INPUT 5  
INPUT 6  
AV in, COMPONENT in (Recommend to connect game console)  
HDMI in with HDCP (Recommend to connect game console)  
S-VIDEO in, AV in  
Audio in, COMPONENT in  
HDMI in with HDCP  
Audio in, HDMI in with HDCP  
INPUT 7  
Audio in, DVI-I in with HDCP  
DIGITAL AUDIO OUTPUT Optical Digital audio output  
1 (PCM/Dolby Digital)  
J
OUTPUT  
Audio out  
SUBWOOFER PRE OUT Monaural audio output  
ANTENNA  
75 Unbalance, F Type  
1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)  
T
J
OSD language  
English/French/Spanish  
AC 120 V, 60 Hz  
Power Requirement  
Power Consumption  
203 W (0.9 W Standby with AC 120V)  
165 W (0.9 W Standby with AC 120V)  
TV + stand  
TV only  
44.1 lbs./20.0 kg  
36.4 lbs./16.5 kg  
52.9 lbs./24.0 kg  
44.1 lbs./20.0 kg  
Weight  
3125/  
3125/  
239/  
103/ inch  
363/  
363/  
253/  
235/  
111/ inch  
TV + stand  
Dimension*2  
64 J  
64 J  
32 J  
16 J  
16 J  
4 J  
8 J  
4
2
2059/  
353/64 inch  
353/64 inch  
(W  
H
D)  
J
J
TV only  
64 J  
Operating temperature  
32°F to 104°F (0°C to 40°C)  
H
H
H
*1  
Emergency alert messages via Cable are unreceivable.  
The dimensional drawings are shown on the inside back cover.  
*2  
• As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product  
improvement without prior notice. The performance specification figures indicated are nominal values of production units.  
There may be some deviations from these values in individual units.  
Part name  
Model number  
Optional accessory  
The listed optional accessory is available for the Liquid  
Crystal Television. Please purchase it at your nearest shop.  
• Additional optional accessories may be available in the near  
future. When purchasing, please read the newest catalogue for  
compatibility and check the availability.  
Wall mount bracket  
AN-37AG2  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLEARING THE SECRET NUMBER  
If you forget the secret number, clear the secret number using the following procedure.  
Press MENU to display the MENU screen, and then press  
/
to select “Setup”.  
c d  
1
2
Press  
/
to select “EZ Setup”, “CH Setup”, “Parental CTRL” or “Reset”, and the Secret number  
a b  
input screen displays.  
Setup  
Option  
Secret No.  
a a a a  
Press and hold both CH  
and VOL on the TV simultaneously until the message appears on the  
U
k
3
screen.  
The secret number is  
.
NOTE  
• As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Calling for Service  
For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or  
customer assistance, please call 1-800-BE-SHARP.  
LIMITED WARRANTY  
CONSUMER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the  
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that  
it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured  
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below  
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or  
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.  
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide  
proof of purchase to the servicer.  
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.  
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE  
LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations  
on how long an implied warranty lasts, so the above limitation may not apply to you.  
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those  
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.  
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and  
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described  
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to  
the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or  
otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which  
were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be  
liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not  
allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM  
STATE TO STATE.  
Model Specific Section  
Your Product Model Number & Description:  
LC-32GP1U/LC-37GP1U LCD Color Television  
(Be sure to have this information available when you need  
service for your Product.)  
Warranty Period for this Product:  
One (1) year parts and labor from the date of purchase.  
Additional Item(s) Excluded from  
Warranty Coverage (if any):  
Non-rechargeable batteries.  
Where to Obtain Service:  
From a Sharp Authorized Servicer located in the United  
States. To find the location of the nearest Sharp Authorized  
Servicer, call Sharp toll free at 1-800-BE-SHARP.  
What to do to Obtain Service:  
Contact your Sharp Authorized Servicer to obtain in-home  
service for this Product. The Servicer will come to your home  
and if it is necessary to remove the Product, the Servicer will  
reinstall it. Be sure to have Proof of Purchase available.  
TO OBTAIN PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07430-2135  
SHARP CORPORATION  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensional drawings  
Unit: Inch/(mm)  
LC-32GP1U  
31 25/64 (  
797)  
27 5/8 (701.4)  
19 31/32 (507)  
3 15/32  
(88)  
3 53/64  
(97)  
7 7/8 (200)  
10 3/4 (273)  
LC-37GP1U  
36 3/16 (919)  
32 25/64 (822.6)  
21 17/64 (540)  
4 37/64  
(116)  
3 53/64  
(97)  
7 7/8 (200)  
11 1/2 (292)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07430-2135  
SHARP CORPORATION  
Printed in Mexico  
Imprimé au Mexique  
Impreso en México  
TINS-C866WJZZ  
07P01-MX-NM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sevylor Boat 2000016013 User Manual
Sharp Flat Panel Television 9JDJ3BX0131A User Manual
Shindaiwa Edger LE261 EVC User Manual
Snapper Computer Monitor 421622BVE User Manual
Snapper Tiller SST5 User Manual
Soleus Air Air Conditioner PH 3 12R 03 User Manual
Sony Clock Radio ICF C218 User Manual
Stanton DJ Equipment M202 User Manual
Sunbeam Water Dispenser WF5700 User Manual
Tanita Scale HD 338 User Manual