Sharp Flat Panel Television LC 15M4U User Manual

15M4UCover 01.07.24  
T I N S - 7 5 2 6 C E Z Z  
I m p r e s s o n o J a p ã o  
I m p r e s o e n J a p ó n  
I m p r e s s o e m p a p e l r e c i c l a d o p ó s u t i l i z a ç ã o .  
I m p r e s o e n p a p e l r e c i c l a d o .  
LC-15M4U  
M A N U A L D E O P E R A Ç Ã O  
M A N U A L D E M A N E J O  
LCD AV MONITOR  
MONITEUR AV À CRISTAUX  
LIQUIDES  
U I D O A L L Í Q D E C R I S T  
T E L A D V E O R A M O N I T  
L V C D O R A M O N I T  
OPERATION MANUAL  
MODE D’EMPLOI  
L C - 1 5 M 4 U  
Printed in Japan  
Imprimé au Japon  
TINS-7526CEZZ  
Printed on post-consumer recycled paper.  
Imprimé sur du papier recyclé.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LC-15M4U  
LCD AV MONITOR  
ENGLISH  
OPERATION MANUAL  
LC-15M4U(01-08)Eng.p65  
1
01.7.24, 5:21 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT INFORMATION  
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO  
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.  
The lightning flash with arrow-  
head symbol, within an equilat-  
eral triangle, is intended to alert  
CAUTION  
RISK OF ELECTRIC SHOCK.  
DO NOT OPEN.  
the user to the presence of  
uninsulated “dangerous voltage”  
within the product’s enclosure  
that may be of sufficient  
magnitude to constitute a risk of  
electric shock to persons.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
The exclamation point within a  
triangle is intended to alert the  
user to the presence of impor-  
tant operating and maintenance  
(servicing) instructions in the  
literature accompanying the  
product.  
Declaration of Conformity  
SHARP LCD AV MONITOR MODEL LC-15M4U  
This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: (1) This  
device may not cause harmful interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
Responsible Party:  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07430  
TEL : 1-800-BE-SHARP (1-800-237-4277)  
U.S.A. ONLY  
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment  
not expressly approved by the manufacturer could void the user’s authority to operate this equipment.  
U.S.A. ONLY  
CAUTION: Use the supplied AC cord as it is.  
Do not remove the core part from the AC cord, and do not  
change the way of winding cables around the core part.  
INFORMATION  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by  
one or more of the following measures:  
• Relocate or adjust the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
U.S.A. ONLY  
2
LC-15M4U(01-08)Eng.p65  
2
01.7.24, 5:21 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT INFORMATION (Continued)  
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF  
PLUG TO WIDE SLOT, FULLY INSERT.  
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury.  
Disposal of these materials may be regulated due to environmental considerations. For disposal or  
recycling information, please contact your local authorities or the Electronic Industries Alliance:  
3
LC-15M4U(01-08)Eng.p65  
3
01.7.24, 5:21 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEAR SHARP CUSTOMER  
Thank you for your purchase of the Sharp LCD product. To ensure safety and many  
years of trouble-free operation of your product, please read the Safety Precautions  
carefully before using this product.  
IMPORTANT SAFETY PRECAUTIONS  
Electricity is used to perform many useful functions, but it can also cause personal injuries and property  
damage if improperly handled. This product has been engineered and manufactured with the highest  
priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent  
potential danger, please observe the following instructions when installing, operating and cleaning the  
product. To ensure your safety and prolong the service life of your LCD product, please read the following  
precautions carefully before using the product.  
1. Read instructions—All operating instructions must be read and understood before the product is  
operated.  
2. Keep this manual in a safe place—These safety and operating instructions must be kept in a safe  
place for future reference.  
3. Observe warnings—All warnings on the product and in the instructions must be observed closely.  
4. Follow instructions—All operating instructions must be followed.  
5. Cleaning—Unplug the power cord from the AC outlet before cleaning the product. Use a damp  
cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.  
6. Attachments—Do not use attachments not recommended by the manufacturer. Use of inadequate  
attachments can result in accidents.  
7. Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen  
sink and laundry tub, swimming pool and in a wet basement.  
8. Stand—Do not place the product on an unstable cart, stand, tripod or table. Placing the product  
on an unstable base can cause the product to fall, resulting in serious personal injuries as well as  
damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the  
manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the  
manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.  
9. When relocating the product placed on a cart, it must be moved with utmost care.  
Sudden stops, excessive force and uneven floor surface can cause the product to  
fall from the cart.  
10. Ventilation—The vents and other openings in the cabinet are designed for  
ventilation. Do not cover or block these vents and openings since insufficient  
ventilation can cause overheating and/or shorten the life of the product. Do not  
place the product on a bed, sofa, rug or other similar surface, since they can  
block ventilation openings. This product is not designed for built-in installation; do  
not place the product in an enclosed place such as a bookcase or rack, unless  
proper ventilation is provided or the manufacturer’s instructions are followed.  
11. Power source—This product must operate on a power source specified on the specification label.  
If you are not sure of the type of power supply used in your home, consult your dealer or local  
power company. For units designed to operate on batteries or another power source, refer to the  
operating instructions.  
12. Power cord protection—The power cords must be routed properly to prevent people from stepping  
on them or objects from resting on them. Check the cords at the plugs and product.  
13. If the AC adapter is misplaced or needs to be replaced, obtain the same type of adapter from a  
SHARP service center or your dealer.  
14. If you plan to use a 12-VDC power supply unit other than the AC adapter supplied with the  
product, make sure the power supply unit provides stable voltage with minimum fluctuations.  
Unstable power supply can cause problems in the product.  
15. The LCD panel used in this product is made of glass. Therefore, it can break when the product is  
dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the  
LCD panel breaks.  
16. Overloading—Do not overload AC outlets or extension cords. Overloading can cause fire or  
electric shock.  
17. Entering of objects and liquids—Never insert an object into the product through vents or openings.  
High voltage flows in the product, and inserting an object can cause electric shock and/or short  
internal parts. For the same reason, do not spill water or liquid on the product.  
4
LC-15M4U(01-08)Eng.p65  
4
01.7.24, 5:21 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18. Servicing—Do not attempt to service the product yourself. Removing covers can expose you to  
high voltage and other dangerous conditions. Request a qualified service person to perform  
servicing.  
19. Repair—If any of the following conditions occurs, unplug the power cord from the AC outlet, and  
request a qualified service person to perform repairs.  
a.When the power cord or plug is damaged.  
b.When a liquid was spilled on the product or when objects have fallen into the product.  
c.When the product has been exposed to rain or water.  
d.When the product does not operate properly as described in the operating instructions.  
Do not touch the controls other than those described in the operating instructions. Improper  
adjustment of controls not described in the instructions can cause damage, which often requires  
extensive adjustment work by a qualified technician.  
e.When the product has been dropped or damaged.  
f. When the product displays an abnormal condition. Any noticeable abnormality in the product  
indicates that the product needs servicing.  
20. Replacement parts—In case the product needs replacement parts, make sure that the service  
person uses replacement parts specified by the manufacturer, or those with the same characteris-  
tics and performance as the original parts. Use of unauthorized parts can result in fire, electric  
shock and/or other danger.  
21. Safety checks—Upon completion of service or repair work, request the service technician to  
perform safety checks to ensure that the product is in proper operating condition.  
22. Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the  
product according to the method recommended by the manufacturer.  
23. Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and  
other heat-generating products (including amplifiers).  
24. Polarization—This AC adapter may be equipped with a polarized alternating current line plug (a  
plug having one blade wider than the other). This plug will fit into the power outlet only one way.  
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the  
plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.  
Do not defeat the safety purpose of the polarized plug.  
The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine  
picture details.  
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or  
red.  
Please note that this does not affect the performance of your product.  
5
LC-15M4U(01-08)Eng.p65  
5
01.7.24, 5:21 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Page  
DEAR SHARP CUSTOMER ............................................................................................................. 4  
IMPORTANT SAFETY PRECAUTIONS .......................................................................................... 4  
SUPPLIED ACCESSORIES ............................................................................................................. 7  
PREPARATION................................................................................................................................. 8  
Power Connection ...................................................................................................................... 8  
Batteries for Remote Control .................................................................................................... 8  
NAMES OF PARTS (Main Unit) ...................................................................................................... 9  
Names of Parts (Remote Control).......................................................................................... 11  
BASIC OPERATION ....................................................................................................................... 12  
Turning on MAIN POWER ........................................................................................................ 12  
Switching the AV INPUT [AV1/AV2] Mode ............................................................................. 12  
Sound Volume ........................................................................................................................... 13  
ON/OFF Standby ....................................................................................................................... 13  
SELECTING THE MENU ITEMS.................................................................................................... 14  
ADJUSTMENT ................................................................................................................................ 15  
Adjusting the LANGUAGE Settings........................................................................................ 15  
Adjusting the PICTURE Settings ............................................................................................ 16  
Adjusting the SET UP Settings ............................................................................................... 18  
Adjusting the SLEEP TIMER Settings .................................................................................... 19  
CONNECTING TO EXTERNAL DEVICES..................................................................................... 20  
Connecting to a VCR, a DVD player etc. (AV 1/2 IN) ............................................................ 20  
Connecting to a DVD player (COMPONENT terminal) ......................................................... 21  
Outputting video and audio (video output) ........................................................................... 22  
Listening with Headphones ..................................................................................................... 22  
Watching TV .............................................................................................................................. 23  
EXAMPLE OF APPLICATION ....................................................................................................... 24  
Mounting the LCD monitor on a wall ..................................................................................... 24  
TROUBLESHOOTING .................................................................................................................... 25  
SPECIFICATIONS........................................................................................................................... 26  
DIMENSIONAL DRAWINGS .......................................................................................................... 27  
6
LC-15M4U(01-08)Eng.p65  
6
01.7.24, 5:21 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUPPLIED ACCESSORIES  
Make sure the following accessories are provided with the product.  
Operation Manual (×1)  
Wireless Remote Control (×1)  
LC-15M4U  
LCD AV MONITOR  
MONITEUR AV Á CRISTAUX  
LIQUIDES  
OPERATION MANUAL  
MODE DEMPLOI  
Printed in Japan  
Printed on post-consumer recycled paper.  
Imprimé au Japon  
Imprimé sur du papier recyclé.  
TINS-7526CEZZ  
RRMCG1459CESA  
TINS-7526CEZZ  
AC Adapter (×1)  
AC Cord (×1)  
QACCD3097CEPZ  
* Product shape varies in some countries  
UADP-0228CEPZ  
“AAA” size (UM/SUM-4)  
Wall Mount Anchor  
and Screw (×4)  
Fixed Screw  
for Set Stand (×1)  
Wall Mount Bracket (×1)  
Dry Battery (×2)  
UBATU0026GEZZ  
LANGU9041CESA  
7
LC-15M4U(01-08)Eng.p65  
7
01.7.24, 5:21 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
Power Connection  
Connect to DC input  
terminal of the product.  
Plug into AC outlet.  
Household power outlet  
DC input terminal  
(12 VDC)  
AC cord  
AC adapter  
Notes:  
I Always turn the main power switch of the LCD monitor to OFF when connecting the AC adapter.  
I Always unplug the AC adapter from the product and power outlet when not being used for a long period of time.  
Batteries for Remote Control  
If the remote control fails to operate monitor functions, replace the batteries in the remote control.  
2 Insert batteries (two AAA”  
size (UM/SUM-4) batteries,  
supplied with product).  
3 Close the battery  
1 Open the battery  
cover.  
cover.  
I Slide the cover while  
pressing down.  
I Place batteries with their  
terminals corresponding to  
the (+) and () indications  
in the battery compartment.  
Caution!  
Cautions regarding batteries  
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the  
instructions below.  
Place batteries with their terminals corresponding to the (+) and () indications.  
Different types of batteries have different characteristics. Do not mix batteries of different types.  
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries  
and/or cause old batteries to leak chemicals.  
Remove batteries as soon as they are non-operable.  
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth.  
The batteries supplied with the product may have a shorter life expectancy due to storage conditions.  
If the remote control is not used for an extended period of time, remove batteries from the remote  
control.  
8
LC-15M4U(01-08)Eng.p65  
8
01.7.24, 5:21 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES OF PARTS (Main Unit)  
Main unit (front view)  
Remote sensor  
window  
Power/Standby  
indicator  
Speakers  
Side control section  
MAIN POWER switch  
MAIN  
POWER  
ON  
OFF  
AV INPUT  
AV INPUT button  
+
VOL  
VOL (+)/(–) buttons  
The six buttons shown at the left  
have the same functions as  
those on the remote control.  
* When this manual describes  
button functions, it is referring  
to the buttons on the remote  
control.  
SELECT (])/([)  
SELECT  
buttons  
MENU  
MENU button  
9
LC-15M4U(09-14)Eng.p65  
9
01.7.24, 5:20 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES OF PARTS (Main Unit) (Continued)  
Main unit (rear view)  
Stand  
Rear Speaker  
(woofer)  
Rear terminal section  
Can also be used as video  
output terminals.  
POWER  
INPUT  
DC12V  
AV 2 IN/OUT  
AUDIO VIDEO  
AV 1 IN  
AUDIO  
VIDEO  
COMPONENT  
HEAD  
PHONE  
R
L
R
L
Y
PB  
PR  
AUDIO  
POWER INPUT  
DC12V  
AUDIO  
VIDEO  
VIDEO  
COMPONENT  
HEADPHONE  
AV 2 IN/OUT  
AV 1 IN  
10  
LC-15M4U(09-14)Eng.p65  
10  
01.7.24, 5:20 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NAMES OF PARTS (Remote Control)  
Remote control  
Infrared transmitter window  
Menu control section  
ON/OFF  
MUTE  
MENU  
Power ON/OFF  
button  
Sound MUTE button  
AV INPUT  
AV INPUT  
button  
MENU button  
SELECT  
SELECT  
SELECT (])/([) buttons  
VOL  
VOL  
VOL (+)/() buttons  
LCD MONITOR  
I The side control section of the main unit is also provided with the AV INPUT, SELECT (])/([),  
VOL (+)/() and MENU buttons.  
* When this manual describes button functions, it is referring to the buttons on the remote control.  
Side control section of main unit  
The main power  
switch is not  
provided on the  
remote control.  
MAIN  
POWER  
ON  
OFF  
AV INPUT  
ON/OFF  
MUTE  
MENU  
AV INPUT  
SELECT  
SELECT  
SELECT  
VOL  
VOL  
+
VOL  
VOL  
VOL  
SELECT  
ON/OFF  
MUTE  
MENU  
SELECT  
MENU  
AV INPUT  
SELECT  
VOL  
VOL  
11  
LC-15M4U(09-14)Eng.p65  
11  
01.7.24, 5:20 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
Turning on MAIN POWER  
Control section of main unit  
M On-screen display  
1 Slide MAIN POWER, located on the  
MAIN  
POWER  
right side of the main unit, to ON.  
ON  
AV1  
2 The power indicator instantaneously  
changes from red to green and the  
main unit is turned on.  
N358  
OFF  
Notes:  
I When the Power indicator is red, press  
ON/OFF on the remote control to turn on  
the monitor.  
The Power indicator changes from red to  
green.  
I The input mode indication disappears after  
five seconds.  
Power/Standby indicator  
Switching the AV INPUT [AV1/AV2] Mode  
1 Turn on the power of the connected  
video equipment.  
Initial mode (AV1)  
2 Press AV INPUT and select the  
applicable input source. The screen  
displays AV1 or AV2 mode at the  
upper right corner each time AV  
INPUT is pressed.  
ON/OFF  
MUTE  
MENU  
ON/OFF  
AV INPUT  
AV INPUT  
SELECT  
SELECT  
VOL  
VOL  
AV1 mode  
Note:  
I The AV input mode indication remains for  
five seconds.  
AV1  
AV2  
• AV1: Video equipment connected to the  
AV1 input terminals.  
LCD MONITOR  
The display of the AV1 mode indicates  
either AV1 or COMPONENT depend-  
ing on the adjustment of the SET UP  
settings.  
AV1 is displayed when AV1 is set to  
NORMAL in the SET UP settings, and  
COMPONENT is displayed when AV1  
is set to COMPONENT.  
AV2 mode  
(see page 18)  
• AV2: The AV2 mode can be set to either IN  
or OUT in the SET UP settings.  
(see page 18)  
AV2 indication is not displayed when  
the mode is selected to OUT.  
12  
LC-15M4U(09-14)Eng.p65  
12  
01.7.24, 5:20 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION (Continued)  
Sound Volume  
To adjust the volume  
ON/OFF  
MUTE  
Press VOL (+) to increase the sound  
volume. The indicator segment  
increases.  
|
MUTE  
MENU  
AV INPUT  
VOLUME  
50  
SELECT  
SELECT  
VOL  
VOL  
Press VOL () to decrease the sound  
volume. The indicator segment  
decreases.  
|
VOLUME  
10  
VOL  
(+)/( )  
LCD MONITOR  
To mute the sound  
Press MUTE to temporarily turn off the  
sound.  
|
The MUTE mark  
is displayed.  
Press MUTE or VOL (+)/() to turn the  
sound back to the previous level.  
|
The MUTE mark  
disappears.  
VOLUME  
30  
Note:  
I MUTE is automatically cleared when the  
following button is pressed: ON/OFF,  
VOL (+)/() or MUTE.  
ON/OFF Standby  
To turn off the LCD monitor  
ON/OFF  
ON/OFF  
MUTE  
MENU  
Press ON/OFF.  
The power indicator turns red.  
AV INPUT  
SELECT  
SELECT  
To turn the LCD monitor back on  
VOL  
VOL  
Press ON/OFF again.  
The power indicator turns green.  
LCD MONITOR  
13  
LC-15M4U(09-14)Eng.p65  
13  
01.7.24, 5:20 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELECTING THE MENU ITEMS  
Selecting the Menu Items  
This LCD monitor set allows you to adjust the picture, sound, and other features using the On-screen  
Display. Select the desired menu item by following the steps below and then refer to the indicated page  
for details.  
1 Press MENU to display the MENU  
(Pages 16 and 17)  
VOL  
(+)/( )  
screen.  
ON/OFF  
MUTE  
PICTURE(AV1)  
[
[
[
[
[
[
[
[
30]  
0]  
CONTRAST  
TINT  
2 Press SELECT (])/([) to select  
MENU  
AV INPUT  
the desired menu item.  
0]  
COLOR  
SELECT  
SELECT  
MENU  
0]  
BLACK LEVEL  
SHARPNESS  
RED-BLUE  
GREEN  
The cursor moves up or down.  
The cursor indicates the selected  
menu item.  
0]  
0]  
0]  
VOL  
VOL  
AUTO]  
COLOR SYSTEM  
RESET  
SELECT  
(])/([)  
3 Press VOL (+)/() to enter.  
SELECT:  
ENTER: VOL+  
EXIT: MENU  
4 Press MENU again to exit.  
(Pages 18 and 19)  
SET UP  
MENU  
LCD MONITOR  
[BRIGHT  
]
BRIGHTNESS  
UPSIDE  
PICTURE  
SET UP  
LANGUAGE  
[NORMAL]  
[NORMAL]  
RIGHT/LEFT  
BLUE SCREEN  
AV1  
AV2 IN/OUT  
SLEEP TIMER  
[OFF  
]
[NORMAL]  
[IN  
]
[ – – – REMAIN]  
SELECT:  
ADJUST: VOL+ EXIT: MENU  
SELECT:  
ENTER: –VOL+  
EXIT: MENU  
(Page 15)  
LANGUAGE  
ENGLISH  
Notes:  
ESPAÑOL  
FRANÇAIS  
I The displayed items differ depending  
on the setting conditions.  
I The selected item is highlighted in  
yellow.  
I Items in purple cannot be selected.  
I The original screen is restored by  
pressing MENU on the menu screen  
or any of the adjustment screens.  
The original screen is also restored  
when no buttons have been pressed  
for about a period of 30 seconds.  
The adjustment values and settings  
that were changed before the screen  
is restored are saved as is in the  
memory.  
SELECT:  
EXIT: MENU  
* The screen indications shown above are larger than actual size for easy reading.  
14  
LC-15M4U(09-14)Eng.p65  
14  
01.7.24, 5:21 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT  
Adjusting the LANGUAGE Settings  
MENU on the LCD monitor set can also be used to select the language.  
1 Press MENU to display the MENU  
VOL  
(+)/( )  
MENU  
ON/OFF  
screen.  
PICTURE  
MUTE  
SET UP  
LANGUAGE  
2 Press SELECT (])/([) to move the  
MENU  
AV INPUT  
cursor to LANGUAGE, and then press  
VOL (+)/(–) to display the LANGUAGE  
screen.  
SELECT  
SELECT  
MENU  
VOL  
VOL  
SELECT  
(])/([)  
SELECT:  
ENTER: –VOL+  
EXIT: MENU  
3 Press SELECT (])/([) to select the  
LANGUAGE  
ENGLISH  
LCD MONITOR  
language you want to display.  
ESPAÑOL  
FRANÇAIS  
4 Press MENU again to exit.  
SELECT:  
EXIT: MENU  
15  
LC-15M4U(15-19)Eng.p65  
15  
01.7.24, 5:18 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the PICTURE Settings  
1 Press MENU to display the MENU  
MENU  
VOL  
(+)/( )  
screen.  
ON/OFF  
PICTURE  
MUTE  
MENU  
SET UP  
LANGUAGE  
2 Press SELECT (])/([) to move the  
cursor to PICTURE, and then press  
VOL (+)/() to display the PICTURE  
screen.  
AV INPUT  
SELECT  
SELECT  
MENU  
VOL  
VOL  
SELECT:  
ENTER: VOL+  
EXIT: MENU  
SELECT  
(])/([)  
PICTURE(AV1)  
CONTRAST  
TINT  
[
[
[
[
[
[
[
[
30]  
0]  
3 Press SELECT (])/([) to move the  
cursor and select the desired  
adjustment item.  
0]  
COLOR  
LCD MONITOR  
0]  
BLACK LEVEL  
SHARPNESS  
RED-BLUE  
GREEN  
COLOR SYSTEM  
RESET  
0]  
All items that can be adjusted are  
shown in the table on the next page.  
0]  
0]  
AUTO]  
4 Press VOL (+)/() to display the screen  
SELECT:  
ENTER: VOL+  
EXIT: MENU  
for the selected adjustment item.  
5 Press VOL (+)/() to make the  
adjustment.  
COLOR  
0
+
ADJUST: VOL+ EXIT: MENU  
SELECT:  
6 Press MENU again to exit.  
16  
LC-15M4U(15-19)Eng.p65  
16  
01.7.24, 5:19 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the PICTURE Settings (Continued)  
Selected item  
CONTRAST  
TINT  
Press VOL ().  
Press VOL (+).  
Increase contrast  
Toward green  
Higher color intensity  
Increase brightness  
Sharp picture  
Decrease contrast  
Toward purple  
COLOR  
Lower color intensity  
Decrease brightness  
Soft picture  
BLACK LEVEL  
SHARPNESS  
RED-BLUE  
GREEN  
More red  
More blue  
Less green  
More green  
COLOR SYSTEM  
Press VOL (+)/() to select COLOR SYSTEM.  
Note:  
I TINT is displayed only when N358 or N443 is selected.  
Switching the COLOR SYSTEM  
Set the system to AUTO for normal reception. The AUTO mode automatically detects the receiving signal  
system and changes the reception system of the set.  
When the picture or sound is not stable, switching to an appropriate system may improve the picture or  
sound quality.  
17  
LC-15M4U(15-19)Eng.p65  
17  
01.7.24, 5:19 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the SET UP Settings  
The SET UP items can be set by the user.  
1 Press MENU to display the MENU  
MENU  
VOL  
(+)/( )  
screen.  
ON/OFF  
PICTURE  
MUTE  
MENU  
SET UP  
LANGUAGE  
2 Press SELECT (])/([) to move the  
AV INPUT  
cursor to SET UP.  
SELECT  
SELECT  
MENU  
VOL  
VOL  
SELECT:  
ENTER: VOL+  
EXIT: MENU  
SELECT  
(])/([)  
3 Press VOL (+)/() to display the SET  
SET UP  
UP screen.  
[BRIGHT  
]
BRIGHTNESS  
UPSIDE  
[NORMAL]  
[NORMAL]  
RIGHT/LEFT  
BLUE SCREEN  
AV1  
4 Check the factory setting of each item  
on the SET UP screen.  
LCD MONITOR  
[OFF  
]
[NORMAL]  
[IN  
]
AV2 IN/OUT  
SLEEP TIMER  
The user can change the settings with  
SELECT (])/([) and VOL (+)/().  
[ – – – REMAIN]  
SELECT:  
ADJUST: VOL+ EXIT: MENU  
5 Press MENU again to exit.  
Selected item  
Factory setting  
Setting change  
BRIGHTNESS  
[BRIGHT] Maximum brightness [NORMAL] Brightness 60% Suitable for viewing in well-lit areas.  
Saves energy.  
[DARK]  
Brightness 20% Sufficiently bright when viewing in  
dim areas.  
UPSIDE  
[NORMAL] Normal vertical  
image orientation  
[DOWN] Inverted image To display images upside down for  
special uses.  
A B C  
RIGHT/LEFT  
[NORMAL] Normal horizontal  
image orientation  
[MIRROR] Mirror image To display mirror images for special  
uses.  
B C  
A B C  
BLUE SCREEN  
[OFF]  
This feature is  
inactivated.  
[ON]  
The screen is turned blue when there is no signal.  
AV1  
[NORMAL]  
[IN]  
[COMPONENT]  
AV2 IN/OUT  
[OUT  
[OUT  
]
Line Output is selected, Output volume is fixed, Speaker  
output is available.  
] Line Output is selected, Output volume is variable,  
Speaker output is Mute.  
[ – – – REMAIN]  
The setting can be specified in increments of 30 minutes and in a  
range between 30 and 120 minutes. (see page 19)  
SLEEP TIMER  
Note:  
I In BLUE SCREEN, PICTURE setting displayed in purple cannot be selected.  
18  
LC-15M4U(15-19)Eng.p65  
18  
01.7.24, 5:19 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADJUSTMENT (Continued)  
Adjusting the SLEEP TIMER Settings  
1 Press MENU to display the MENU  
MENU  
VOL  
ON/OFF  
PICTURE  
MUTE  
screen.  
(+)/( )  
SET UP  
LANGUAGE  
MENU  
AV INPUT  
2 Press SELECT (])/([) to move the  
cursor to SET UP, and then press VOL  
(+)/() to display the SET UP screen.  
SELECT  
SELECT  
MENU  
VOL  
VOL  
SELECT:  
ENTER: VOL+  
EXIT: MENU  
SELECT  
(])/([)  
3 Press SELECT (])/([) to move the  
cursor to SLEEP TIMER, and then  
press VOL (+)/() to set SLEEP TIMER  
(in minutes).  
SET UP  
[BRIGHT  
]
BRIGHTNESS  
UPSIDE  
[NORMAL]  
[NORMAL]  
RIGHT/LEFT  
BLUE SCREEN  
AV1  
AV2 IN/OUT  
SLEEP TIMER  
LCD MONITOR  
[OFF  
]
[NORMAL]  
[IN  
]
The setting can be specified in  
increments of 30 minutes and in a  
range between 30 and 120 minutes.  
The setting is turned off when --- is  
displayed.  
[ – – – REMAIN]  
SELECT:  
ADJUST: VOL+ EXIT: MENU  
4 Press MENU again to exit.  
Note:  
I If the monitors power is turned off and then  
turned back on again after the SLEEP TIMER  
has been set, the setting will be canceled.  
19  
LC-15M4U(15-19)Eng.p65  
19  
01.7.24, 5:19 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING TO EXTERNAL DEVICES  
Connecting to a VCR, a DVD Player, etc. (AV 1/2 IN)  
This LCD monitor can be connected to most external devices as shown below.  
When connecting to an external device, turn off the power of the main unit and then connect to the device  
to prevent any possible damage.  
AV 2 IN/OUT  
AUDIO VIDEO  
AV 1 IN  
AUDIO  
VIDEO  
COMPONENT  
R
L
R
L
Y
PB  
P
R
To AUDIO input  
terminal  
To AUDIO input  
terminal  
To VIDEO input  
terminal  
To VIDEO input  
terminal  
Audio cord  
Video cord  
Audio cord  
Video cord  
(BNC TYPE)  
(BNC TYPE)  
To audio output  
terminal  
To video output  
terminal  
To audio output  
terminal  
To video output  
terminal  
Audio Audio Video  
(R) (L)  
Audio Audio  
Video  
(R)  
(L)  
R
VCR, Laser disc player, etc.  
DVD Player, etc.  
* For improved picture quality from video  
sources with COMPONENT output, use  
the connection diagram on page 21.  
Notes:  
I PC connection is not possible.  
I Use a commercially available audio/video cord for the cable.  
I When connecting or disconnecting the video cord (BNC TYPE) to or from the VIDEO input terminal, disconnect the  
audio cable.  
I Only connect audio/video signals to AV 1/2 IN terminals. Connecting other signals may result in a malfunction.  
I Do not connect headphones to AV 2 IN.  
I For details concerning the usage and connection of external devices, see their respective instruction manuals.  
20  
LC-15M4U(20-28)Eng.p65  
20  
01.7.24, 5:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING TO EXTERNAL DEVICES (Continued)  
Connecting to a DVD player (COMPONENT terminal)  
AV 2 IN/OUT  
AUDIO VIDEO  
AV 1 IN  
AUDIO  
VIDEO  
COMPONENT  
R
L
R
L
Y
PB  
P
R
To AUDIO  
input terminal  
To COMPONENT  
terminal  
Audio cord  
Video cord  
(BNC TYPE)  
To audio  
output terminal  
To COMPONENT  
terminal  
Y
PB  
Audio  
(R)  
Audio  
(L)  
P
R
DVD Player  
Note:  
I To view the image from the component connected to the terminals for AV 1 IN, set AV1 to COMPONENT with the  
SET UP setting (see page 18).  
21  
LC-15M4U(20-28)Eng.p65  
21  
01.7.24, 5:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING TO EXTERNAL DEVICES (Continued)  
Outputting video and audio (video output)  
It is possible to output video and audio from the set through the AV output terminals (AV-OUT).  
AV 2 IN/OUT  
AUDIO VIDEO  
AV 1 IN  
AUDIO  
VIDEO  
COMPONENT  
R
L
R
L
Y
PB  
P
R
Connect a VCR, Audio amplifies, etc  
Notes:  
I AV2 can be set to input or output. When set to input, output is not possible and vice versa.  
I When using COMPONENT, there is no video output can be made to the AV output terminal, but there is audio output  
for connecting to external audio systems.  
Listening with Headphones  
I Plug the headphone mini-plug into the headphone jack located on the rear side of the set.  
On-screen display  
POWER  
INPUT  
HEAD  
PHONE  
DC12V  
Mini-plug  
HEADPHONE  
VOLUME  
jack  
60  
Headphones  
Notes:  
I The headphones are not included in the supplied accessories.  
I No sound will be heard from the main unit speakers when the headphones are connected.  
22  
LC-15M4U(20-28)Eng.p65  
22  
01.7.24, 5:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING TO EXTERNAL DEVICES (Continued)  
Watching TV  
To view a TV broadcast on the LCD monitor, the set-top box must be used with a TV tuner, satellite tuner  
or VCR. Refer to the diagram below for wiring.  
TV  
ROOM ANTENNA  
TERMINAL  
SET-TOP BOX  
MONITOR  
TV BROADCAST  
(ON AIR)  
AUDIO  
VIDEO  
R
L
(BNC TYPE)  
TV ANT  
RF IN  
VCR  
VIDEO OUT  
AUDIO  
VIDEO  
R
L
(BNC TYPE)  
TV ANT  
RF IN  
TV TUNER  
VIDEO OUT  
PAY TV  
AUDIO  
VIDEO  
R
L
(BNC TYPE)  
CABLE  
RF IN  
RF IN  
RF IN  
SET TOP BOX  
VIDEO OUT  
SATELLITE TV  
AUDIO  
VIDEO  
R
L
(BNC TYPE)  
SATELLITE  
SATELLITE TUNER  
VIDEO OUT  
WEB TV  
AUDIO  
VIDEO  
R
L
TV ANT  
(BNC TYPE)  
TEL, LINE  
Web  
SET TOP BOX  
VIDEO OUT  
23  
LC-15M4U(20-28)Eng.p65  
23  
01.7.24, 5:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXAMPLE OF APPLICATION  
Mounting the LCD monitor on a wall  
Note:  
I Consult with your dealer and authorized shop before installation. (Various materials are used for wall. Some materi-  
als may not be strong enough or thick enough to hold the mounting screws in place or support the weight of the set.)  
1.6 in. (40 mm)  
1 Drill holes measuring 0.3 in. (8 mm) in  
diameter on the wall (hollow wall, plaster  
board).  
0.3 in. (8 mm) ø  
2 Insert the supplied anchors into the holes,  
and strike the heads of the anchors with a  
hammer until the anchors are securely  
installed in the wall.  
Note:  
I The supplied anchor screws are inserted in  
anchors. Remove the screws from the anchors  
before installation.  
Anchor Screw  
(Supplied)  
0.5 in. (12.5 mm)  
3 Position the supplied wall mount bracket in  
place using the anchor screws. Tighten the  
anchor screws securely.  
CAUTION: • The wall mount bracket must be  
installed with four anchor screws.  
Be sure to thighten so that it will  
not fall down under a pulling  
Wall Mount  
Bracket  
(Supplied)  
force of at least 44 lbs (20 Kg).  
• The anchors are designed for  
plaster boards with a thickness  
of 0.5 in. (12.5 mm). For a 0.4-  
in. (9.5 mm) thickness board or a  
wooden wall, find similar anchors  
or screws at a hardware store.  
Anchor  
(Supplied)  
4 Mount the back stand of the main unit on the  
wall mount bracket with the supplied fixed  
screw.  
Wall Mount Bracket (× 1)  
Anchor and Screw (× 4)  
Fixed Screw (× 1)  
(Supplied)  
* To change the vertical angle of the  
monitor, tilt the screen up to 8°  
downward. Adjust the angle of the  
monitor for the most comfortable  
viewing.  
24  
LC-15M4U(20-28)Eng.p65  
24  
01.7.24, 5:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Problem  
Check item  
Pages  
Make sure that the AC power cord plug is securely  
inserted in AC power outlet and AC adapter.  
Make sure that the AC adapters DC output is securely  
connected to main units DC input terminal.  
Make sure that the main power switch of the main unit is  
on.  
Make sure that the AV input is properly set.  
Make sure that the cables are correctly connected to  
rear terminal section of LCD monitor.  
8
12  
12  
No image on screen, and  
no sound from speakers.  
Check to see if the batteries in the remote control have  
sufficient power.  
8
Make sure that the unit is not in the standby mode  
(power indicator is red).  
13  
Make sure that the cables are correctly connected.  
20, 21  
Speakers produce sound,  
but no image on screen.  
Check COLOR and TINT adjustments. (NTSC ONLY)  
Check CONTRAST and BLACK LEVEL adjustments.  
Check RED-BLUE adjustments.  
17  
17  
Make sure that the VCR connection cord is correctly  
connected to the COMPONENT terminal.  
Image is too light or  
improperly tinted.  
Make sure that the cables are properly connected to  
rear terminal section of LCD monitor.  
Check the volume adjustment.  
Make sure that the sound is not muted.  
Make sure that the headphones are not connected.  
13  
13  
22  
Image is displayed, but no  
sound from speakers.  
Check to see if BRIGHTNESS is set to DARK.  
Check CONTRAST and BLACK LEVEL adjustments.  
Lamp may have reached the end of its life. (Contact a  
Sharp service shop for a lamp replacement.)  
18  
17  
Image is too dark.  
Check COLOR adjustment.  
17  
17  
Check the color system setting.  
Make sure that the VCR connection cord is correctly  
connected to PB and PR of the  
COMPONENT terminal.  
No colors on image.  
Check to see if the batteries in the remote control  
have sufficient power.  
Make sure that (+) and () side of batteries are  
properly positioned in remote control.  
Make sure that the remote sensor window is not  
under strong fluorescent lighting.  
8
8
Remote control does not work.  
25  
LC-15M4U(20-28)Eng.p65  
25  
01.7.24, 5:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
ITEMS  
Panel  
LC-15M4U  
15Black TFT LCD  
LCD  
Number of dots  
Low reflection  
Brightness  
921,600 (640 × 3 × 480) dots  
Non-glare  
430 cd/m2  
Viewing angles  
Left to right 160°  
Upper to lower 160°  
60,000 hours (at normal mode)  
Lamp Life  
COLOR SYSTEM System  
N358/N443/PAL/PAL-M/PAL-N/PAL-60/SECAM  
3.4 W (0.7 W × 2 + 2.0 W)  
AUDIO  
Output  
Speaker  
Full range 1.2 × 1.6 in. (3 × 4 cm) Oval, 2 pcs.  
Woofer 2.6 in. (6.5 cm) Round, 1 pc.  
Video Composite (BNC TYPE), Audio R/L  
Component input, Y/PB/PR (BNC TYPE)  
Video Composite (BNC TYPE), Audio R/L  
0.1 in. (3.5 mm) ø jack  
TERMINALS  
AV 1 IN  
AV 2 IN/OUT  
Headphone jack  
POWER SUPPLY DC operation  
AC operation  
DC 12 V, Typical: 1.9 A, Max: 3.2 A  
AC 110~240 V, 50/60 Hz with AC adapter  
AC 120 V, Typical: 28 W, Standby: 0.5 W  
Silver  
Power consumption  
Exterior color  
APPEARANCE  
Outside dimensions  
14.1 (W) × 12.2 (H) × *2.5 (D) in.  
(357.0 (W) × 309.2 (H) × *62.5 (D) mm)  
Net weight  
7.5 lbs (3.4 kg), incl. stand, excl. accessories  
Language: English/French/Spanish/Portuguese  
Infrared wireless type  
ACCESSORIES  
Operation manual  
Remote control  
Wall mount parts  
Wallmount Bracket × 1 pc.  
Fixed Screw × 1 pc.  
Wallmount Anchor and Screw × 4 pc.  
AC adapter  
Auto-wide type, 1 pc.  
DC cable: 6.5 ft (2 m)  
DC power converter:  
2.5 (W) x 1.5 (H) x 4.7 (D) in.  
(65 (W) x 37 (H) x 120 (D) mm)  
AC cord  
Batteries  
6.1 ft (1.85 m), 1 pc.  
AAAsize (UM/SUM-4) Dry Battery × 2 pc.  
English/French/Spanish  
OSD LANGUAGE Language  
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for  
product improvement without prior notice. The performance specification figures indicated are nominal values of  
production units. There may be some deviations from these values in individual units.  
* Excluding stand.  
26  
LC-15M4U(20-28)Eng.p65  
26  
01.7.24, 5:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIMENSIONAL DRAWINGS  
Unit: inch/mm  
14.1/357  
POWER  
1.2/31  
0.6/16  
MAIN  
POWER  
ON  
OFF  
AV INPUT  
VOL  
SELECT  
MENU  
POWER  
INPUT  
AV 2 IN/OUT  
AUDIO VIDEO  
L
AV 1 IN  
AUDIO  
VIDEO  
COMPONENT  
PB  
HEAD DC12V  
PHONE  
°
R
R
L
Y
PR  
90  
1.4/36.6  
2.5/62.5  
3.4/87  
27  
LC-15M4U(20-28)Eng.p65  
27  
01.7.24, 5:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Calling for Service  
For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer  
assistance, please call 1-800-BE-SHARP.  
LIMITED WARRANTY  
END-USER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first end user purchaser that this Sharp brand product (the  
Product), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it  
will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured  
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below  
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or  
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.  
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide  
proof of purchase to the servicer.  
To the extent permitted by applicable state law, the warranties set forth herein are in lieu of, and exclusive of, all other  
warranties, express or implied. Specifically, ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE  
EXCLUDED. ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY,  
FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PURPOSE ARE SPECIFICALLY EXCLUDED. If, under  
applicable state law, implied warranties may not validly be disclaimed or excluded, the duration of such implied warranties is  
limited to the period(s) from the date of purchase set forth below.  
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those  
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.  
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and  
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described  
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the  
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.  
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused  
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any  
way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on  
warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.  
Model Specific Section  
Your Product Model Number & Description:  
LC-15M4U LCD AV MONITOR  
(Be sure to have this information available when you need service for  
your Product.)  
Warranty Period for this Product:  
One (1) year parts and labor from the date of purchase.  
Additional Item(s) Excluded from  
Warranty Coverage (if any):  
None  
Where to Obtain Service:  
From a Sharp Authorized Servicer located in the United States.  
To find the location of the nearest Sharp Authorized Servicer, call  
Sharp toll free at 1-800-BE-SHARP.  
What to do to Obtain Service:  
Ship prepaid or carry in your Product to a Sharp Authorized Servicer.  
Be sure to have Proof of Purchase available. If you ship the Product,  
be sure it is insured and packaged securely.  
TO OBTAIN PRODUCT INFORMATION, CALL 1-888-LCD-SHARP.  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07430-2135  
28  
LC-15M4U(20-28)Eng.p65  
28  
01.7.24, 5:17 PM  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sony Camcorder XR105E User Manual
Sony Computer Monitor pr710te User Manual
Sony Speaker XS V1333 User Manual
StarTechcom Fan FAN939775HP User Manual
Stiga Blower SBL 620 B User Manual
Sunfire Stereo Amplifier 913 047 00 User Manual
SUPER MICRO Computer Network Card P4SCT+ User Manual
Sylvania Portable DVD Player SMPK4038B User Manual
Sylvania TV VCR Combo 6719DD User Manual
Tanaka Trimmer THT 2520 User Manual