OPERATION
MANUAL
LC-13SH4U
LC-15SH4U
LC-20SH4U
ENGLISH
LIQUID CRYSTAL TELEVISION
Products that have earned the ENERGY STAR®
are designed to protect the environment through
superior energy efficiency.
IMPORTANT:
Model No.:
Serial No.:
To aid reporting in case of loss or theft, please record the
TV’s model and serial numbers in the space provided. The
numbers are located at the rear of the TV.
U.S.A. ONLY
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
The lightning flash with arrow-head
symbol, within an equilateral
triangle, is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point within a
triangle is intended to alert the user
to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the product.
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Printed in China
TINS-B905WJN2
05P02-CH-NM
Download from Www.Somanuals.com. All Manuals Search And Download.
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years
of trouble-free operation of your product, please read the Important Safety Precautions carefully before
using this product.
IMPORTANT SAFETY PRECAUTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly
handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can
result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when install-
ing, operating and cleaning the product. To ensure your safety and prolong the service life of your LCD color TV product,
please read the following precautions carefully before using the product.
■
■
Read instructions—All operating instructions must be read and understood before the product is operated.
Keep this manual in a safe place—These safety and operating instructions must be kept in a safe place for future
reference.
■
■
■
Observe warnings—All warnings on the product and in the instructions must be observed closely.
Follow instructions—All operating instructions must be followed.
Attachments—Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can
result in accidents.
Power source—This product must operate on a power source specified on the specification label. If you are not sure of
the type of power supply used in your home, consult your dealer or local power company. For units designed to operate
on batteries or another power source, refer to the operating instructions.
AC cord protection—The AC cords must be routed properly to prevent people from stepping on them or objects from
resting on them. Check the cords at the plugs and product.
Overloading—Do not overload AC outlets or extension cords.
Overloading can cause fire or electric shock.
Entering of objects and liquids—Never insert an object into the product through vents or openings. High voltage flows in
the product, and inserting an object can cause electric shock and/or short internal parts. For the same reason, do not
spill water or liquid on the product.
■
■
■
■
■
■
Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other
dangerous conditions. Request a qualified service person to perform servicing.
Repair—If any of the following conditions occurs, unplug the AC cord from the AC outlet, and request a qualified service
person to perform repairs.
a. When the AC cord or plug is damaged.
b. When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d. When the product does not operate properly as described in the operating instructions.
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls not
described in the instructions can cause damage, which often requires extensive adjustment work by a qualified
technician.
e. When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the
product needs servicing.
Replacement parts—In case the product needs replacement parts, make sure that the service person uses replacement
parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of
unauthorized parts can result in fire, electric shock and/or other danger.
■
■
■
■
Safety checks—Upon completion of service or repair work, request the service technician to perform safety checks to
ensure that the product is in proper operating condition.
Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according to the
method recommended by the manufacturer.
Polarization—This AC cord may be equipped with a polarized alternating current line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
■
■
■
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product.
Do not use liquid cleaners or aerosol cleaners.
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub,
swimming pool and in a wet basement.
Stand—Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can
cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand,
tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a
wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the
manufacturer.
Download from Www.Somanuals.com. All Manuals Search And Download.
■
■
When relocating the product placed on a cart, it must be moved with utmost care. Sudden
stops, excessive force and uneven floor surface can cause the product to fall from the cart.
Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not
cover or block these vents and openings since insufficient ventilation can cause overheating
and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other
similar surface, since they can block ventilation openings. This product is not designed for
built-in installation; do not place the product in an enclosed place such as a bookcase or
rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.
The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when
the product is dropped or applied with impact. Be careful not to be injured by broken glass
pieces in case the Liquid Crystal panel breaks.
■
■
■
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating
products (including amplifiers).
The Liquid Crystal panel is a very high technology product with 921,600 thin film transistors, giving you fine picture
details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of your product.
If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides
information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
■
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
NEC—NATIONAL ELECTRICAL CODE
(NEC ART 250, PART H)
■
■
Lightning – For added protection for this television equipment during a lightning storm, or when it is left unattended and
unused for long period of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the
equipment due to lightning and power-line surges.
Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
To prevent fire, never place any type of candle or flames on the top or near the TV set.
■
■
To prevent fire or shock hazard, do not expose this product to dripping or splashing. No objects filled with liquids, such
as vases, should be placed on the product.
■
■
To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
Do not display a still picture for a long time, as this could cause an afterimage to remain.
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied Accessories
Make sure the following accessories are provided with the LCD TV set.
AC cord
Wireless remote control
“AA” size batteries (×2)
LC-13SH4U
LC-15SH4U
LC-20SH4U
Operation manual
Preparation
Installing Batteries in the Remote Control
Before using the LCD TV set for the first time, install the two “AA” size batteries (supplied) in the remote control. When the
1
batteOrpieesnbtehceobmaettedreypcleotveedr.and2the remote control fails to operate, replace the batteries with new “AA” size batteries.
Insert two “AA” size batteries.
3
Close the battery cover.
2
1
•
Detach the cover
while pressing the
•
Place batteries with their
terminals corresponding
to the (+) and (–)
indications in the battery
compartment.
•
Align the tab on the battery cover (1) and place
it while pressing the tab (2) to close it.
(
) part.
"
Caution!
Precautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
•
•
•
Place batteries with their terminals corresponding to the (+) and (–) indications.
Different types of batteries have different characteristics. Do not mix batteries of different types.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause old
batteries to leak chemicals.
•
Remove batteries as soon as they are depleted. Chemicals that leak from batteries can cause a rash. If chemical
leakage is found, wipe it off with a cloth.
•
•
The batteries supplied with the LCD TV set may have a shorter operating time due to storage conditions.
If the remote control is not to be used for an extended period of time, remove the batteries from the remote control.
Using the Remote Control
Use the remote control by pointing it towards the remote sensor
window of the main unit. Objects between the remote control and
sensor window may prevent proper operation.
SLEEP TIMER
indicator
POWER indicator
Remote sensor
Cautions regarding use of the remote control
•
Do not apply shock to the remote control. In addition, do not
expose the remote control to liquids, and do not place it in an area
with high humidity.
•
•
Do not install or place the remote control under direct sunlight. The
heat may cause deformation of the unit.
The remote control may not work properly if the remote sensor
window is under direct sunlight or strong lighting. In such a case,
change the angle of the lighting or main unit, or operate the remote
control closer to the remote sensor window.
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Connection
ANTENNAS
•
The antenna requirements for good color television reception are more important than those for black & white television
reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various antenna systems.
F-type connector
1. A 75-ohm system is generally a round cable with F-type connector that can easily
be attached to a terminal without tools (not supplied).
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
2. A 300-ohm system is a flat “twin-lead” cable that can be attached to a 75-ohm
terminal through a 300/75-ohm adapter (not supplied).
OUTDOOR ANTENNA CONNECTION
•
•
Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna
B: Using separate VHF and/or UHF outdoor antennas
Connect the outdoor antenna cable lead-in to ANT. (Antenna terminal) on the rear of the main unit.
A. Combination VHF/UHF Antenna
300/75-ohm
adapter
(not supplied)
VHF/UHF
ANT. (Antenna terminal)
antenna
VHF/UHF
antenna
300-ohm
twin-lead
or
75-ohm
coaxial cable
Antenna cable
(commercially available)
B. Separate VHF and/or
UHF Antennas
UHF
VHF
antenna
antenna
300-ohm
twin-lead
Combiner
(not supplied)
300-ohm
twin-lead
OUT
IN
75-ohm
or
coaxial cable
F-type connector
NOTICE
F-type connector should be finger-tightened only.
When connecting the RF cable to the LCD TV set, do not tighten F-type
connector with tools.
If tools are used, it may cause damage to your LCD TV set.
(The breaking of internal circuit, etc.)
75-ohm coaxial cable
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Connection (Continued)
CABLE TV (CATV) CONNECTION
• A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75-ohm coaxial cable
to the set, screw the 75-ohm cable to the ANT. terminal.
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are
scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company.
This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV to channel 3
or 4, typically one of these channels is used. If this is unknown, consult your cable TV company.) For more
specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the
converter/descrambler provided by your cable TV company is explained below.
Please note: An RF switch provided with two inputs (A and B) is required (not supplied).
“A” position on the RF switch (not supplied): You can view all unscrambled channels by using the TV’s channel keys.
“B” position on the RF switch (not supplied): You can view the scrambled channels via the converter/descrambler by
using the converter’s channel keys.
RF switch (not supplied)
Two-set
signal
splitter
(not
Cable TV Line
supplied)
OUT
IN
Cable TV converter/
descrambler
(not supplied)
A
•
Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.
Power Connection
Connect to the POWER INPUT terminal of the LCD TV set using the AC cord (supplied).
POWER
POWER INPUT
terminal (AC 120V)
Household
power outlet
To POWER INPUT terminal
AC cord
NOTE
Unplug the AC cord from the LCD TV set and power outlet when the LCD TV set is not to be used for a long period of time.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names of Main Unit
The examples used throughout this manual are based on the LC-20SH4U model.
Controls
How to adjust the angle
Upper control panel
VOL (Volume)
POWER
INPUT
MENU
CH (Channel)
)/(
(–)/(+)
(
)
Tilt the display by holding the upper
part while securely holding down the
stand with your other hand.
To change the vertical angle of the LCD TV
set, tilt the screen up to 2.5 degrees forwards
or 10 degrees backwards. Please adjust the
angle so that the LCD TV set can be
watched most comfortably.
Speaker
Speaker
SLEEP TIMER indicator
The SLEEP TIMER indicator lights up red when the SLEEP TIMER
is set to “ON”.
Remote sensor
POWER indicator
The POWER indicator lights up green when the power is on, and
red when in the standby mode (the indicator will not light up when
the main power is off).
A
•
INPUT, CH ( )/( ), VOL (–)/(+) and MENU on the main unit have the same functions as the same buttons on the remote control.
Fundamentally, this operation manual provides a description based on operation using the remote control.
Listening with Headphones
Plug the headphone mini-plug into the headphone jack
located on the side of the LCD TV set.
Adjust the sound volume using VOL (+)/(–) on the remote
control.
Headphones
On-screen dispiay
VOLUME
20
NOTE
•
•
Headphones are not included in the supplied accessories.
No sound is heard from the main unit speakers when a
headphone mini-plug is connected into the headphone jack.
Do not set the volume at a high level. Hearing experts advise
against extended listening at high volume levels.
•
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names of Main Unit (Continued)
Terminals
Rear View
ANT. (Antenna terminal)
POWER INPUT
terminal
Headphone jack
Stand
Round lock for Kensington
Security Standard slot*
*
Using the Kensington Lock
P
P
Y
R
B
• This LCD TV set has a
INPUT1
INPUT2
Kensington Security Standard
slot for use with a Kensington
MicroSaver Security System.
Refer to the information that
came with the system for
AUDIO (R)
AUDIO (L)
INPUT1
S-VIDEO
VIDEO
AUDIO (L)
AUDIO (R)
AUDIO (L)
AUDIO (R)
instructions on how to use it to
secure the LCD TV set.
AUDIO OUT
How to Fix the Cables
Pull the cables connected to each terminal. Insert the cables into the stand hole and fix the cables.
Stand hole
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names of Remote Control
MUTE
Mutes the sound.
DISPLAY
Displays the receiving channel
and the current time for 10
seconds.
POWER
Switches the Liquid Crystal
Television power on or standby.
SLEEP
Sets the sleep timer.
VOL (+)/(–)
Sets the volume.
CH ( )/(
)
Selects channel.
ENTER
Executes a command.
' / " /\ / | (Cursor control)
Selects a desired item on the
screen.
MENU RETURN
Returns to the previous
screen.
CC
Displays Closed Caption
subtitles.
MENU
Displays the menu screen.
BACKLIGHT
Adjusts the brightness of the
screen.
Channel Select
Sets the channel.
AUDIO ONLY
Outputs audio without screen
image.
PIC. FLIP
Sets the orientation of the
picture.
INPUT( )/(
)
Switches the input source
between INPUT1, INPUT2
and TV modes.
MTS
Selects audio settings.
AV MODE
Selects preferred AV MODE.
FLASHBACK
Returns to the previous
channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
EZ SETUP
Press ENTER to access START EZ SETUP mode.
Press '/" to select “YES”, and press ENTER.
3
EZ SETUP during the First Power On
■ When you turn on the TV for the first time, it will automati-
cally memorize the broadcasting channels.
Please perform the following instructions before you press
POWER.
A
• If you want to stop the EZ SETUP process once it has
started, press MENU and it will be canceled. If you want to
set up again, please see CH-SETTING.
(1) Insert the batteries into the remote control.
(2) Connect the antenna cable to the LCD TV set.
(3) Connect the AC cord to the POWER INPUT terminal of
the LCD TV set and plug in the AC cord to the wall
outlet.
YES
NO
CONNECT
OR CABLE.
ANTENNA
POWER
The tuner will automatically search for the broadcasting
and cable TV channels. (The channel number will
automatically increase when it appears.)
PLEASE
WAIT
AUTO PROGRAMMING
4
Once EZ SETUP is completed, the lowest channel
number memorized will be displayed.
2
1
2
Press POWER, located on the upper side of the main
unit, to turn on the TV. The SELECT LANGUAGE mode
will be displayed.
Press '/" to select “ENGLISH”, “ESPAÑOL”
STEREO
SAP
MONO
(Spanish) or “FRANÇAIS” (French).
ENGLISH
ESPAÑOL
FRANÇAIS
A
•
Do not let the EZ SETUP screen remain unattended for a long
time.
•
If EZ SETUP does not memorize all the channels in your region,
please see CH-SETTING for more information on manually
memorizing the channels using CH-SETTING.
It may be difficult to preset when the broadcasting signals are
weak, the channel cycle frequency is incorrect or the frequency
jamming is occurring around the area. Please see CH-SETTING
for more information on manually memorizing the channels using
CH-SETTING.
Press ENTER to access CH-SETTING mode.
Press '/" to select “ON” or “OFF”. When you select
“ON”, the LCD TV set will automatically memorize the
broadcasting channels.
•
ON
OFF
A
•
If you select “OFF”, EZ SETUP will be canceled.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Turning On and Off the Main Power
Switching the Input Modes
(INPUT1/INPUT2/TV)
POWER
1
Turn on the power of the connected video equipment.
2
Press INPUT ( )/( ) to select the applicable input
source. The screen changes in order of INPUT1,
INPUT2 and TV mode each time INPUT is pressed.
INPUT1 (COMPONENT) mode
I N P U T 1
4 8 0 P
POWER indicator
●
Press POWER. The POWER indicator instantly changes
from red to green and the LCD TV set is turned on.
INPUT2 mode
I N P U T 2
On-screen display
STEREO
SAP
MONO
TV mode
2
A
•
The On-screen display disappears after a few seconds.
●
To turn off the main power, press POWER again.
A
•
INPUT1 :
Used for video equipment connected to the COMPONENT input
terminals.
INPUT2 :
Standby
•
Used for video equipment connected to the INPUT2 terminal.
The S-video input terminal is additionally provided for the
INPUT2. If both the S-video terminal and normal video
terminals are connected with cables, the S-video input
terminal takes priority.
To turn off the LCD TV set
Press POWER. The POWER indicator will turn red.
To turn the LCD TV set back on
Press POWER again. The POWER indicator will turn green.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation (Continued)
Sound Volume
Changing Channels
■ To adjust the volume
You can select channels using Channel Select or
CH ( )/( ).
●
●
Press VOL (+) to increase the sound volume.
•
This LCD TV set allows you to select up to 125 channels
(1 to 125). To select a channel, enter a 2- or 3-digit number.
The bar indicator shifts right.
VOLUME
50
■ Using Channel Select
When selecting the channel using Channel Select, complete
input of the channel number by holding down the button for
the last digit for a moment.
Press VOL (–) to decrease the sound volume.
The bar indicator shifts left.
VOLUME
10
To select a 1- or 2-digit channel number (e.g., Channel 5):
Complete the following procedure within 4 seconds.
1
2
Press the
button.
Press the
button.
■ To mute the sound
0 –
5
●
Press MUTE to temporarily turn off the sound.
The MUTE mark is displayed for 4 seconds.
A
•
When selecting a 1-digit channel number, do not fail to press the
button first.
To select a 3-digit channel number (e.g., Channel 115):
Complete the following procedure within 4 seconds.
●
Press MUTE or VOL (+)/(–) to turn the sound back to the
previous level.
The mute function is automatically turned off when any of
the following buttons are pressed: POWER, MUTE,
VOL (+)/(–) or MTS.
1
Press the
button.
2
Press the
button.
1 – –
1 1–
VOLUME
10
3
Press the
button.
A
•
When VOL (+)/(–) is pressed in the Mute mode, the sound turns
on and the volume indicator is displayed.
1 15
•
The Mute function is canceled when POWER is pressed.
A
•
The 3-digit channel number can be selected only when the
receiving mode is set to CABLE in CH-SETTING.
■ To select MTS (Multichannel TV Sound)
1
2
Press MTS to display the MTS screen.
Changing channels with CH ( )/( ) on the remote control
Air:
Press CH ( ) and the channels change in the order shown below:
Press MTS to select the MTS settings.
STEREO: stereo audio
2 → 3 → . . . → 68 → 69 → 2 → 3 → . . .
Press CH ( ) and the channels change in the order shown below:
3 → 2 → 69 → 68 → . . . → 3 → 2 → . . .
SAP:
MONO:
secondary audio program
monophonic audio
Cable: Press CH ( ) and the channels change in the order shown below:
1 → 2 → 3 → . . . → 125 →1 → 2 → 3 → . . .
Press CH ( ) and the channels change in the order shown below:
3 → 2 → 1 → 125 → . . . → 3 → 2 → 1 → . . .
STEREO
SAP
<
<
ON A I R
ON A I R
M
ONO
A
■ Using FLASHBACK
•
“ON AIR” appears when a STEREO or SAP broadcast is being
aired.
●
Press FLASHBACK to switch the currently tuned channel
to the previously tuned channel.
Press FLASHBACK again to switch back to the currently
Download from Www.Somanuals.com.●All Manuals Search And Download.
tuned channel.
■ Menu setting screens
0
Selecting Menu Items
A
The menus can be used to adjust the various settings of your
LCD TV set. Select the desired menu item by following the
steps below. See the right column for each Menu screen.
•
•
The illustrations and on-screen displays in this manual are for
explanation purposes and may vary slightly from the actual
appearance.
Depending on the setting condition, such as an input mode, it may
not be possible to adjust or set some items. In such cases, a
message will be displayed on the menu setting screen.
A
•
•
•
The items displayed differ depending on the setting conditions.
The item selected is displayed in yellow.
Settings most recently adjusted will be saved in memory.
PICTURE
MENU[
PICTURE
]
■ Using the remote control
PICTURE
S
AUDIO SETUP
OPTION
AV
MODE
[DYNAMIC]
BACKLIGHT
CONTRAST
BRIGHTNESS[
[
[
BRIGHT
45]
0 ]–
]
+
+
COLOR
[+
5]–
TINT
[
[
0 ]
0
SHARPNESS
ADVANCED
RESET
]–
+
1
2
Press MENU on the remote control to display the Menu
Screen.
:
SELECT
ENTER
:
ENTER
RETURN
:
BACK
MENU
:
EXIT
Press \/| to select the desired menu item.
• The cursor moves left or right.
The bar above is an operational guide for the remote
control. The bar will change in accordance with each menu
setting screen.
• The cursor indicates the selected menu item.
3
Press '/" to select the desired item, and press \/|
to adjust the selected item.
• For “AV MODE”, “ADVANCED” and “RESET”, press
ENTER to display the setting screen.
AUDIO
MENU[
AUDIO]
MENU[
PICTURE
]
PICTURE
AUDIO SETUP
TREBLE
BASS
BALANCE[
RESET
OPTION
PICTURE
S
AUDIO SETUP
OPTION
[
[
]–
]–
]L
+
+
R
0
0
0
AV
MODE
[DYNAMIC]
[
[
BACKLIGHT
CONTRAST
BRIGHTNESS[
BRIGHT
]
45]
0 ]–
5]–
+
+
COLOR
[+
TINT
[
[
0 ]
0 ]–
SHARPNESS
ADVANCED
RESET
+
SETUP
MENU [
SETUP
]
4
Press MENU RETURN to return to the previous screen,
or press MENU to exit.
PICTURE
AUDIO SETUP
OPTION
CH–SETTTING
MTS
AUDIO
V–CHIP
CLOSED
OUT
BLOCK
CAPTION
■ Using the control panel of the main unit
LANGUAGE
Control panel of the main unit
OPTION
MENU[
INPUT
OPTION
]
PICTURE
AUDIO
SETUP
OPTION
VIEW
AUDIO
BLUE
SLEEP
MODE
ONLY
SCREEN
TIMER
VOL (–)/(+)
(Volume)
MENU
CH ( )/(
(Channel)
)
NO
NO
SIGNAL
OPERATION
FLIP
OFF
OFF
PICTURE
Press MENU on the main unit to display the Menu
Screen.
1
2
Press VOL (–)/(+) to select the desired menu item.
• The cursor moves left or right.
• The cursor indicates the selected menu item.
Press CH ( )/( ) to select the desired item, and press
VOL (–)/(+) to adjust the selected item.
• For “AV MODE”, “ADVANCED” and “RESET”, press
INPUT to display the setting screen.
3
4
Press MENDUotowenxliot.ad from Www.Somanuals.com. All Manuals Search And Download.
Basic Adjustment Settings
AV MODE
COLOR TEMPERATURE
AV MODE gives you preset options to choose from, to best
match the image based on room-brightness and playback
software used.
You can adjust the color temperature to give a better white
balance.
1
2
3
4
Press MENU to display the Menu screen.
Press \/| to select “PICTURE”.
1
Press MENU to display the Menu Screen.
2
3
4
Press \/| to select “PICTURE”.
Press '/" to select “ADVANCED”, and press ENTER.
Press '/" to select “AV MODE”, and press ENTER.
Press '/" to select “COLOR TEMP.”, and press
ENTER.
Press '/" to select desired setting, and press
COLOR
RED
GREEN
BLUE
TEMP.
ENTER.
[
[
[
0 ]
0 ]
0 ]
USER
HIGH
MIDDLE
LOW
STANDARD
DYNAMIC
DYNAMIC(FIXED)
MOVIE
RESET
GAME
5
6
Press '/" to select the desired item, and press
ENTER.
5
Press MENU to exit.
Press MENU to exit.
A
Selected item
Description
Can set your desired color*
White with Bluish tone
•
You can select a different AV MODE item for each input mode.
(For example, select “STANDARD” for TV input and “DYNAMIC”
for VIDEO input.)
USER
HIGH
MIDDLE
LOW
•
When “AV MODE” is set to “DYNAMIC (FIXED)”, “NO PICTURE
ADJUSTMENTS AVAILABLE IN [DYNAMIC (FIXED)].” is
displayed and the items in the PICTURE screen (except
“ADVANCED”) cannot be set.
White with Reddish tone
*When you select “USER”, the following items are adjustable.
Selected item \ button | button
RED Weaker red Stronger red
Directly setting the AV MODE
1
Press AV MODE.
GREEN
BLUE
Weaker green
Weaker blue
Stronger green
Stronger blue
2
Before the AV MODE display disappears, press
AV MODE again and select your desired setting.
A
•
Each time you press AV MODE, the mode changes
as shown below.
•
When resetting the items in the “USER” setting to factory preset
values, perform the following procedures.
1
AV MODE [DYNAMIC]
AV MODE [STANDARD]
Press '/" to select “RESET” in the ADVANCED screen, and
press ENTER.
2
Press '/" to select “YES”, and press ENTER.
AV MODE [GAME]
AV MODE [MOVIE]
AV MODE [DYNAMIC (FIXED)]
Selected item
Description
STANDARD
Changing image settings to standard
values.
DYNAMIC
For a clear-cut image emphasizing
high contrast for sports viewing.
DYNAMIC (FIXED)
Changing image settings to factory
preset values. No adjustments are
allowed.
MOVIE
GAME
Controlling the contrast to enable
easier viewing of dark images.
Controlling the brightness of video
games and other images for easier
viewing.
Download from Www.Somanuals.com. All Manuals Search And Download.
BACKLIGHT
PICTURE Adjustments
You can adjust the brightness of the picture.
You can adjust the picture to your preference with the
following picture settings.
1
2
3
Press MENU to display the Menu screen.
Press \/| to select “PICTURE”.
1
2
3
Press MENU to display the Menu Screen.
Press \/| to select “PICTURE”.
Press '/" to select a specific adjustment item.
PICTURE
S
AUDIO
SETUP
OPTION
AV
MODE
[DYNAMIC]
Press '/" to select “BACKLIGHT”.
BACKLIGHT
CONTRAST
[
[
BRIGHT
45]
]
PICTURE
S
AUDIO
SETUP
OPTION
AV
MODE
[DYNAMIC]
BRIGHTNESS[
0 ]–
+
+
BACKLIGHT
CONTRAST
[
[
BRIGHT
45]
]
COLOR
[+
5]–
TINT
[
[
0 ]
BRIGHTNESS[
0 ]–
5]–
+
+
SHARPNESS
ADVANCED
RESET
]–
+
0
COLOR
[+
TINT
[
[
0 ]
SHARPNESS
ADVANCED
RESET
]–
+
0
4
5
Press \/| to adjust the item to your desired position.
4
5
Press \/| to adjust the item to your desired position.
Press MENU to exit.
Selected item
\ button
The screen dims
For less contrast
For less brightness
| button
Press MENU to exit.
BACKLIGHT
CONTRAST
BRIGHTNESS
COLOR
The screen brightens
For more contrast
For more brightness
Directly setting the BACKLIGHT
1
2
Press BACKLIGHT to display the BACKLIGHT screen.
For less color intensity For more color intensity
TINT
Skin tones become
purplish
Skin tones become
greenish
Press BACKLIGHT to change the setting.
SHARPNESS
For less sharpness
For more sharpness
BACKLIGHT [BRIGHT]
BACKLIGHT [NORMAL]
A
BACKLIGHT [VARIABLE]
BACKLIGHT [DARK]
•
When resetting all adjustment items (except for the items on the
AV MODE and ADVANCED menus) to factory preset values,
perform the following procedures.
A
1
Press '/" to select “RESET” in the PICTURE screen, and
•
•
The BACKLIGHT screen automatically disappears in 3 seconds.
press ENTER.
Press '/" to select “YES”, and press ENTER.
[BRIGHT]: Maximum brightness
[NORMAL]: Suitable for viewing in a well-lit area. Saves energy.
[DARK]: Sufficiently bright when viewing in dim areas.
2
[VARIABLE]: The brightness can be adjusted to suit your prefer-
ence using \/|.
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Adjustment Settings (Continued)
AUDIO Adjustments
SETUP
You can adjust the sound quality to your preference with the
following settings.
Press MENU to display the Menu screen.
1
2
3
Press \/| to select “SETUP”.
1
2
3
Press MENU to display the Menu screen.
Press \/| to select “AUDIO”.
Press '/" to select desired item, and press ENTER.
SETUP
OPTION
CH–SETTING
MTS
Press '/" to select a specific adjustment item.
AUDIO
V–CHIP
CLOSED
OUT
BLOCK
CAPTION
AUDIO
SETUP
OPTION
TREBLE
BASS
BALANCE[
RESET
[
[
0 ]–
0 ]–
0 ]L
+
+
R
LANGUAGE
Press '/" to change the setting, and press ENTER.
Press MENU to exit.
4
5
4
5
Press \/| to adjust the item to your desired position.
Press MENU to exit.
Selected item
Factory setting
[STEREO] Stereo audio [SAP] Secondary
audio program
MONO]Monophonic
audio
VAO]
Setting options
Selected item
\ button
For weaker treble
For weaker bass
| button
For stronger treble
For stronger bass
MTS
TREBLE
BASS
[
BALANCE
Decrease audio from
the right speaker
Decrease audio from
the left speaker
AUDIO OUT
[OUT
FAO]
[OUT
Line Output is
selected, Output
volume is fixed,
Speaker output is
available.
Line Output is
selected, Output
volume is variable,
Speaker output is
mute.
A
•
The items on the AUDIO menu cannot be set when “AUDIO OUT”
is set to “OUT
VAO”.
•
When resetting all adjustment items to factory preset values,
perform the following procedures.
LANGUAGE
[ENGLISH]
[ESPAÑOL]
[FRANÇAIS]
1 Press '/" to select “RESET”, and press ENTER.
2 Press '/" to select “YES”, and press ENTER.
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Features
■ Saving broadcast TV channels in the memory
CH-SETTING
■
EZ SETUP
When you move to an area with different broadcasting
signals, you may have to set the channel numbers and
the time with the EZ SETUP function. To activate EZ
SETUP, perform the following procedures.
1 Press '/" to select “CH-SETTING” in the SETUP screen,
and press ENTER.
1
2
3
Press MENU to display the Menu screen.
2 Press '/" to select “EZ SETUP”, and press ENTER.
3 Press '/" to select “YES”, and press ENTER.
Press \/| to select “SETUP”.
■
Setting the AIR/CABLE
It is necessary to set the receiving mode to AIR or CABLE
channels to receive locally broadcast TV programs.
Press '/" to select “CH-SETTING”, and press
ENTER.
Press '/" to select “CH SEARCH”, and press
4
ENTER.
EZ
SETUP
AIR/CABLE
CABLE
1
CH
CH
SEARCH
MEMORY
Press ENTER. The tuner will search through all
available channels in your area and add them to the TV
memory.
5
1
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
2
3
4
2
Press '/" to select “CH-SETTING”, and press ENTER.
Press '/" to select “AIR/CABLE”, and press ENTER.
STEREO
SAP
MONO
Press '/" to select desired setting, and press ENTER.
EZ
SETUP
AIR/CABLE
AIR
A
CH
CH
SEARCH
MEMORY
CABLE
•
To interrupt CH SEARCH, press MENU RETURN. CH SEARCH will
stop at the current channel and will not add any higher channels.
Press MENU to exit.
■ Adding weak or additional channels or erasing
unwanted channels from TV memory
5
A
Receivable channels of your LCD TV set are:
Individual settings of programs can be adjusted.
•
AIR channels:
VHF: 2 through 13
UHF: 14 through 69
CABLE channels:
1 (HRC and IRC)
2 through 125 (STD, HRC and IRC)
1
In step 4 above, press '/" to select “CH MEMORY”,
and press ENTER.
EZ
SETUP
AIR/CABLE
CHANNEL
SKIP
AIR
ON
2
CH
CH
SEARCH
MEMORY
Press '/" to move the cursor to “CHANNEL”, and use
\/| or Channel Select to select each desired channel
to add or erase.
2
Press '/" to move the cursor to “SKIP”, and use \/|
3
4
to select “ON” or “OFF”.
Press MENU to exit.
A
•
If CH SEARCH is performed again, the previously memorized
channels will be lost.
Download from Www.Somanuals.com. All Manuals Search And Download.
V-CHIP Settings
■ V-CHIP
•
This function allows TV programs to be restricted and TV usage to be controlled based on FCC data. It prevents children from watching
violent or sexual scenes that may be harmful.
•
Restriction of TV programs includes two ratings that contain information about the program: the MPAA (Motion Picture Association of
America) rating and the TV Parental Guidelines. The MPAA rating is restricted by age. TV Parental Guidelines are restricted by age and
content.
•
Since a TV program may use either the MPAA rating or the TV Guidelines, both should be adjusted for complete control.
MPAA rating
RATING
G
GENERAL AUDIENCES. All ages admitted.
PG
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NO ONE 17 AND UNDER ADMITTED.
PG-13
age
based
R
NC-17
X
X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.
MPAA rating
Example 2:
Example 1:
R in the age-based rating is
blocked, this will also
automatically block the higher
ratings NC-17 and X.
PG-13 in the age-based rating is
blocked, this will also
automatically block the higher
ratings R, NC-17 and X.
A
•
The MPAA rating is only age-based.
TV parental guidelines
content based
⇐
⇒
FV
V
S
L
D
Rating
(Fantasy
Violence)
(Violence)
(Sexual
Situation)
(Adult
Language)
(Sexually
Suggestive
Dialog)
TV-Y (All children)
TV-Y7 (Direct to Older Children)
✕
⇑
age
TV-G (General Audience)
TV-PG (Parental Guidance Suggested)
TV-14 (Parents Strongly Cautioned)
TV-MA (Mature Audience Only)
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
✕
based
⇓
: The content rating can be set, but this rating is not normally broadcast by TV stations.
✕: The content rating can be set.
TV parental guidelines
Example:
When TV-Y7 in the age-based rating is set to BLOCK, this will automatically block the higher ratings: TV-G, TV-PG, TV-14 and TV-MA. In addition,
D, L, S, V and FV in BLOCK CONTENT are automatically blocked unless you manually set BLOCK CONTENT.
A
•
•
•
Age-based ratings can be modified by the content-
based ratings, but only in the combinations indicated
by an X in the table above.
Choosing a lower age-based rating blocks the higher
age-based ratings regardless of content rating
settings.
If you set TV-Y and TV-Y7 to BLOCK, BLOCK
CONTENT will display all items.
Download from Www.Somanuals.com. All Manuals Search And Download.
Canadian Rating Systems
• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission
(CRTC) policy on violence in television programming.
• While violence is the most important content element to be rated, the structure developed takes into consideration
other program content like language, nudity, sexuality and mature themes.
• When setting the V-CHIP on the Canadian system, you can choose either the Canadian English ratings or the
Canadian French ratings.
Canadian English ratings
Rating
Description
Children: Intended for younger children under the age of 8 years. Pays careful attention to
themes that could threaten their sense of security and well-being.
C
Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable,
or only way to resolve conflict; nor encourage children to imitate dangerous acts which
they may see on the screen.
C8e
General: Considered acceptable for all age groups. Appropriate viewing for the entire
family, contains very little violence, physical, verbal or emotional.
G
Parental Guidance: Intended for a general audience, but may not be suitable for younger
children (under the age of 8) because it could contain controversial themes or issues.
Age
PG
Over 14 Years: Could contain themes where violence is one of the dominant elements of
the storyline, but it must be integral to the development of plot or character. Language
usage could be profane and nudity present within the context of the theme.
14e
Adults: Intended for viewers 18 years and older and might contain depictions of violence,
which while related to the development of plot, character or themes, are intended for adult
viewing. Could contain graphic language and portrayals of sex and nudity.
18e
Canadian French ratings
Rating
Description
General: All ages and children, contains minimal direct violence, but may be integrated
into the plot in a humorous or unrealistic manner.
G
General but inadvisable for young children: May be viewed by a wide public audience, but
could contain scenes disturbing to children under 8 who cannot distinguish between
imaginary and real situations. Recommended for viewing with parent.
8anse
Age
Over 13 years: Could contain scenes of frequent violent scenes and therefore
recommended for viewing with parent.
13anse
16anse
Over 16 years: Could contain frequent violent scenes and intense violence.
Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme
violence.
18anse
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Features (Continued)
V-CHIP Settings (Continued)
V-CHIP settings allow you to set MPAA rating, TV GUIDE-
LINES, Canadian English ratings and Canadian French ratings.
■ Setting V-CHIP
● Setting BLOCK CONTENT (TV GUIDELINES)
Repeat steps 1 to 4 of Setting V-CHIP.
1
Press '/" to select “TV GUIDELINES”, and press
2
ENTER.
Press '/" to select “BLOCK CONTENT”, and press
3
ENTER.
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
BLOCK
BLOCK
BLOCK
BLOCK
BLOCK
BLOCK
BLOCK
CONTENT
Press MENU to display the Menu screen.
1
[D
L
S
V
FV]
Press \/| to select “SETUP”.
2
Press '/" to select the desired item, and press \/| to
4
5
Press '/" to select “V-CHIP BLOCK”, and press ENTER.
3
4
select “BLOCK” or “–––––” (unblock).
“INPUT SECRET NO.” will be displayed. Input the 4-
digit secret number by using Channel Select.
D
L
S
V
BLOCK
BLOCK
BLOCK
BLOCK
BLOCK
A
FV
•
When you input the secret number for the first time, press
ENTER to register. Otherwise, continue to step 5.
Press MENU to exit.
–
–
–
–
Press '/" to select the desired item, and press ENTER.
5
6
MPAA
TV
GUIDELINES
CAN.ENGLISH
CAN.FRENCH
STATUS
RATINGS
RATINGS
Press '/" to select the desired item, and press \/|
to select “BLOCK”.
(MPAA rating)
(TV GUIDELINES)
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
BLOCK
–––––
BLOCK
BLOCK
BLOCK
BLOCK
G
PG
PG–13
R
NC–17
X
–––––
BLOCK
BLOCK
BLOCK
BLOCK
BLOCK
BLOCK
CONTENT
[D
L
S
V
FV]
(Canadian English ratings) (Canadian French ratings)
C
C8+
G
PG
14+
18+
BLOCK
BLOCK
BLOCK
BLOCK
BLOCK
BLOCK
G
8
13
16
18
BLOCK
BLOCK
BLOCK
BLOCK
BLOCK
ans+
ans+
ans+
ans+
Press MENU to exit.
7
A
•
The setting automatically enters “BLOCK” for any ratings below
your selection.
Download from Www.Somanuals.com. All Manuals Search And Download.
■ Activating V-CHIP BLOCK
■ Changing V-CHIP BLOCK settings
● Setting STATUS
1
Repeat steps 1 to 3 of Setting V-CHIP, then “INPUT
SECRET NO.” will be displayed.
–
–
–
–
Input the 4-digit secret number by using Channel
Select; the V-CHIP select mode will be displayed.
Set the V-CHIP BLOCK again.
2
1
Repeat steps 1 to 4 of Setting V-CHIP.
Press '/" to select “STATUS”, and press ENTER.
2
MPAA
TV
GUIDELINES
MPAA
CAN.ENGLISH
CAN.FRENCH
STATUS
RATINGS
RATINGS
TV
GUIDELINES
CAN.ENGLISH
CAN.FRENCH
STATUS
RATINGS
RATINGS
Press '/" to select “ON”, and press ENTER.
■
Changing or clearing the SECRET NUMBER
If you forget the secret number, clear the secret number
as follows.
3
ON
OFF
Upper control panel of the main unit
A
•
If “STATUS” is set to “OFF”, V-CHIP BLOCK will not be
activated.
CH (
)
Press MENU to exit.
VOL (+)
4
MENU
1
Repeat steps 1 to 3 of Setting V-CHIP, or 1 and 2 of
Canceling the V-CHIP BLOCK screen while V-CHIP
BLOCK is activated, then “INPUT SECRET NO.” will
be displayed.
■
Canceling the V-CHIP BLOCK screen while V-
CHIP BLOCK is activated
“V-CHIP HAS BEEN ACTIVATED” appears if you watch
a program with the same Program Rating data you
configured.
1
Press and hold both CH ( ) and VOL (+) on the main
unit simultaneously until the message “INPUT SECRET
NO.” blinks.
2
3
Press MENU to exit.
V–CHIP
HAS
BEEN
ACTIVATED
TV–14
DLSV
A
•
“V-CHIP HAS BEEN ACTIVATED” will not be displayed if
“STATUS” is set to “OFF”.
Press MENU to display “INPUT SECRET NO.”.
2
3
–
–
–
–
Input the 4-digit secret number by using Channel
Select; V-CHIP BLOCK is temporarily canceled. If you
input an incorrect secret number, “SECRET NO. IS
INCORRECT” is displayed. In this case, input the
correct secret number.
Download from Www.Somanuals.com. All Manuals Search And Download.
Directly setting the CLOSED CAPTION
CLOSED CAPTION
1
Press CC to display the CC/TEXT screen.
■ Setting CLOSED CAPTION
•
This LCD TV set is equipped with an internal Closed Caption
decoder. “Closed Caption” is a system which allows conversa-
tions, narration, and sound effects in TV programs and home
videos to be viewed as captions on the TV screen (see the
illustration).
CC/TEXT[OFF]
•
•
Not all programs and videos will offer closed captioning. Please
look for the “ ” symbol to ensure that captions will be shown.
The Closed Caption broadcasts can be viewed in two modes:
CAPTION and TEXT. For each mode, two channels are
available: CH1 and CH2.
The CAPTION mode shows subscripts of dialogs and commen-
taries of TV dramas and news
programs while allowing a clear view
2
Press CC to change the setting.
CC/TEXT [OFF]
CC/TEXT [T2]
CC/TEXT [CC1]
CC/TEXT [CC2]
CC/TEXT [T1]
of the picture.
The TEXT mode displays various
information over the picture (such as
TV program schedules and weather
A
• CC1: CLOSED CAPTION mode for CH1 data
CC2: CLOSED CAPTION mode for CH2 data
T1: TEXT mode for CH1 data
T2: TEXT mode for CH2 data
forecasts, etc.) that is independent of
the TV programs.
A
•
If a broadcast contains Closed Caption data and MUTE is
pressed, the LCD TV set enters CLOSED CAPTION mode
automatically. Pressing MUTE again will return the LCD TV set
to its previous condition.
Closed Caption may malfunction (white blocks, strange charac-
ters, etc.) if signal conditions are poor or if there are problems at
the broadcast source. This does not necessarily indicate a
problem with your LCD TV set.
Setting the CLOSED CAPTION on the Menu screen
•
•
•
•
If any button is pressed to call up the On-Screen Display while
viewing a Closed Caption broadcast, the closed captions will
disappear momentarily.
If no TEXT broadcast is being received while viewing in the
TEXT mode, the screen may become blank for some programs.
Should this occur, switch the CLOSED CAPTION mode to OFF.
If you select “CC1”, “CC2”, “T1” or “T2” (or MUTE is pressed)
while “VIEW MODE” is set to “ZOOM” or “STRETCH”, then the
mode for “VIEW MODE” will be automatically changed to “4:3”
or “16:9”.
1
2
3
Press MENU to display the Menu screen.
Press \/| to select “SETUP”.
Press '/" to select “CLOSED CAPTION ”, and press
ENTER.
4
Press '/" to change the CLOSED CAPTION setting,
and press ENTER.
OFF
CC1
CC2
T1
T2
A
• CC1: CLOSED CAPTION mode for CH1 data
CC2: CLOSED CAPTION mode for CH2 data
T1: TEXT mode for CH1 data
T2: TEXT mode for CH2 data
5
Press MENU to exit.
Download from Www.Somanuals.com. All Manuals Search And Download.
VIEW MODE
AUDIO ONLY
You can select the picture display size for the playback image
of the DVD player from the following four modes: “4:3”, “16:9”,
“ZOOM” and “STRETCH”.
When listening to music from a music program, you can set
the Liquid Crystal display off and enjoy audio only.
Setting the AUDIO ONLY on the Menu screen
1
2
3
4
Press MENU to display the Menu screen.
1
Press MENU to display the Menu screen.
Press \/| to select “OPTION”.
2
3
Press \/| to select “OPTION”.
Press '/" to select “VIEW MODE”, and press ENTER.
Press '/" to select desired setting, and press ENTER.
Press '/" to select “AUDIO ONLY”, and press
ENTER.
Press '/" to select “ON”, and press ENTER.
4
4:3
ON
16:9
OFF
ZOOM
STRETCH
Selected item
Description
ON
Audio is output without screen image.
Both screen images and audio are output.
Selected item
Description
OFF
4:3
Displays the image in a 4:3 size.
16:9
Stretches the image horizontally to display it in a
16:9 size.
Directly setting the AUDIO ONLY
ZOOM
Displays the center part of the image by enlarging
it towards the horizontal and vertical directions.
1
Press AUDIO ONLY. ‘PRESS “AUDIO ONLY” FOR
VIDEO OFF’ is displayed on the screen.
STRETCH
Stretches the image horizontally.
Image type
4:3
16:9
ZOOM
STRETCH
(For an image
stretched vertically)
AUDIO
ONLY
[OFF]
PRESS"AUDIO
ONLY"FOR
VIDEO
OFF
(For an image
stretched vertically
with bands at the left
and right sides)
2
3
Press AUDIO ONLY again. The screen image will
disappear.
Press AUDIO ONLY again. The screen image will be
displayed again.
(For a 4:3 image)
Press MENU to exit.
5
A
•
The 4:3 image will be distorted on the screen when the “VIEW MODE”
is set to “16:9”.
•
When the CLOSED CAPTION mode is set to “CC1”, “CC2”, “T1” or
“T2”, “ZOOM” and “STRETCH” cannot be set for “VIEW MODE”.
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful Features (Continued)
BLUE SCREEN
SLEEP TIMER
This function automatically turns the screen blue if no
broadcast signal is received.
You can set the SLEEP TIMER to automatically turn off the
TV.
POWER
1
2
3
Press MENU to display the Menu screen.
Press \/| to select “OPTION”.
Press '/" to select “BLUE SCREEN”, and press
ENTER.
Setting the SLEEP TIMER on the Menu screen
4
Press '/" to select “ON”, and press ENTER.
Press MENU to display the Menu screen.
1
ON
Press \/| to select “OPTION”.
OFF
2
Press '/" to select “SLEEP TIMER”, and press
3
5
Press MENU to exit.
ENTER.
A
4
Press '/"/\/| to select “30MIN”, “60MIN”, “90MIN”,
•
When received signals are weak or interfered with by some other
signals, the BLUE SCREEN function may be activated. To watch
the TV under such conditions, set “BLUE SCREEN” to “OFF”.
The BLUE SCREEN function is activated when INPUT mode is
selected with no signal being input.
“120MIN”, “150MIN” or “OFF”, and press ENTER.
3
6
0 MIN
OFF
•
MIN
0
9
0 MIN
12
15
MIN
MIN
0
0
5
Press MENU to exit.
A
•
After you set the SLEEP TIMER, pressing POWER on the main
unit or on the remote control will cancel the SLEEP TIMER
setting.
•
5 minutes before the SLEEP TIMER turns off the LCD TV,
“5 MIN REMAINING” is displayed on the screen for 4 seconds.
The SLEEP TIMER counts down and shows a similar 4-second
display for each remaining minute until the timer turns off the LCD
TV set.
Directly setting the SLEEP TIMER
1
Press SLEEP to display the SLEEP TIMER screen.
SLEEP
TIMER
[OFF]
2
Press SLEEP to set the sleep timer (in minutes).
[OFF]
[30MIN]
[60MIN]
[150MIN]
[120MIN]
[90MIN]
(minutes)
A
The SLEEP TIMER screen automatically disappears in 3 seconds.
Download from Www.Somanuals.com.•All Manuals Search And Download.
NO SIGNAL OFF
PICTURE FLIP
Power control setting allows you to save energy.
When set to “ENABLE”, the power will automatically shut
down if no signal inputs for 5 minutes.
You can set the orientation of the picture.
Setting the PICTURE FLIP on the MENU screen
1
2
3
Press MENU to display the Menu screen.
1
Press MENU to display the Menu screen.
Press \/| to select “OPTION”.
2
3
Press \/| to select “OPTION”.
Press '/" to select “PICTURE FLIP”, and press
Press '/" to select “NO SIGNAL OFF”, and press
ENTER.
ENTER.
4
Press '/" to select the desired mode, and press
4
Press '/" to select “ENABLE”, and press ENTER.
ENTER.
ENABLE
NORMAL
MIRROR
ROTATE
DISABLE
5
Press MENU to exit.
UPSIDE
DOWN
A
•
•
•
“DISABLE” is factory preset value.
This function can work only in TV mode.
If interfered with by other broadcast or radio waves, “NO SIGNAL
OFF” may not work properly even when the broadcast is over.
5
Press MENU to exit.
Directly setting the PICTURE FLIP
Press PIC.FLIP to display the PICTURE FLIP screen.
1
NO OPERATION OFF
Press PIC.FLIP to change the setting.
2
When set to “ENABLE”, the power will automatically shut
down if there is no operation for 3 hours.
PICTURE FLIP [NORMAL]
PICTURE FLIP [MIRROR]
PICTURE FLIP [UPSIDE DOWN] PICTURE FLIP [ROTATE]
Press MENU to display the Menu screen.
1
Press \/| to select “OPTION”.
2
[NORMAL]
[MIRROR]
Normal image
orientation.
To display mirror images
for special uses.
Press '/" to select “NO OPERATION OFF”, and
3
press ENTER.
Press '/" to select “ENABLE”, and press ENTER.
4
ENABLE
DISABLE
•
5 minutes before the power shuts down, remaining
time is displayed every minute.
[UPSIDE DOWN]
[ROTATE]
To display upside down
images for special uses.
To display rotated images
for special uses.
Press MENU to exit.
5
A
•
“DISABLE” is factory preset value.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting External Devices
You can enjoy picture and sound by connecting a VCR or a home video game system to the terminals located on the rear of
the main unit.
When connecting an external device, turn off the POWER of the main unit first to prevent any possible damage.
Example of External Devices that can be Connected
To INPUT1 terminal
<Example>
• DVD Player, etc.
INPUT1
Component cable
Y
P
B
R
P
• Digital TV tuner
Audio (L)
Audio (R)
Audio cable
* If your external device has a component terminal,
COMPONENT connection is recommended
(you can view high-quality pictures).
To INPUT2 terminal
INPUT2
S-Video cable
<Example>
• Camcorder
S-Video
• Home video game system
• VCR
Audio/Video cable
Video
Audio (L)
Audio (R)
*
If your external device has an S-video terminal,
S-VIDEO connection is recommended.
To AUDIO OUT terminal
AUDIO OUT
Audio cable
<Example>
• Audio amplifier
Audio (L)
Audio (R)
*
You can output audio signals from the TV
set through the AUDIO OUT terminal.
The AUDIO OUT terminal has 2 output modes.
ANote:
•
•
•
•
•
For the cable, use a commercially available audio/video cable.
PC connection is not possible.
For more information about external device connections, see the operation manuals of your external devices.
Make sure that the corresponding cables are connected to each terminal. Connecting other cables may result in a malfunction.
INPUT2 has two terminals, VIDEO and S-VIDEO terminals. If your external device has an S-VIDEO terminal, S-VIDEO connection is
recommended. S-VIDEO provides a finer, more detailed picture. If both terminals are connected, S-VIDEO terminal takes a priority.
Only when 480IDoro4w80nPlosigandalfirsoremceiWvedwtwhro.SugohmtheanINuPaUlTs1.,cpoicmtur.eAcallnMbeadnisuplaaylsedS. earch And Download.
•
Troubleshooting
■ Before calling for repair services, make the following checks for possible remedies to the encountered symptoms.
LCD TV set
Problem
Check item
• Make sure the AC cord is properly inserted in the power outlet.
• Reception other than those of broadcasting stations can be considered.
• Make sure the input mode is set to TV.
Picture
Sound
There is no
• Make sure the POWER switch of the main unit is on.
picture or
sound.
There is no
picture.
There is no
picture from
INPUT2
• Make sure the BRIGHTNESS is properly adjusted.
• Fluorescent lamp may have reached the end of service life.
• Make sure the S-VIDEO terminal has nothing connected.
• Make sure the AUDIO ONLY is not set to ON.
Picture
• Make sure the volume is not set to minimum.
• Make sure the sound is not set to mute.
• Make sure that headphones are not connected.
There is no
sound.
• Make sure the antenna cable is properly connected.
• Bad reception could be the problem.
There is no
picture or
sound, just
noise.
• Make sure the antenna cable is properly connected.
• Bad reception could be the problem.
Picture is
not clear.
• Check color adjustment.
Picture is
light or
improperly
tinted.
• Press the BACKLIGHT button, or set the BACKLIGHT or BRIGHTNESS
settings.
• Check CONTRAST and BRIGHTNESS adjustment.
• Fluorescent lamp may have reached the end of service life.
The picture
is too dark.
• Check the batteries of the remote control.
• Make sure the remote sensor window is not under strong lighting.
Remote control does not work.
Unit cannot be operated.
• External influences such as lightning, static electricity, etc., may cause
improper operation. In this case, operate the unit after first turning the
power off the LCD TV set, or unplugging the AC cord and re-plugging it
in after 1 or 2 minutes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
Antenna
Problem
Check item
•
•
•
•
The reception may be weak.
The picture is not sharp.
The picture moves.
The quality of the broadcast may also be bad.
Make sure the antenna is facing the correct direction.
Make sure the outside antenna is connected.
•
•
Make sure the antenna is facing the correct direction.
There may be reflected electric waves from mountains or buildings.
The picture is doubled or tripled.
The picture is spotted.
•
There may be interference from automobiles, trains, high-voltage lines, neon lights,
etc.
There may be interference between the antenna cable and AC cord. Try positioning
them further apart.
•
•
•
Is the unit receiving interference from other devices?
There are stripes on the screen
or colors fade.
Transmission antennas of radio broadcasting stations, transmission antennas of
amateur radios and cellular phones may also cause interference.
Use the unit as far apart as possible from devices that may cause possible interference.
■ Cautions regarding use in high and low temperature environments
•
When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not
a malfunction, and the unit will recover when the temperature returns to normal.
•
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as
this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: –4°F to +140°F (–20°C to +60°C)
Specifications
Model
Items
LC-13SH4U
LC-15SH4U
LC-20SH4U
LCD panel
13" Advanced Super View
& BLACK TFT LCD
15" Advanced Super View
& BLACK TFT LCD
20" Advanced Super View
& BLACK TFT LCD
Number of dots
921,600 dots VGA
N358
Video color systems
TV Standard (CCIR)
TV Tuning System
NTSC
PLL 181 ch.
MTS+SAP
125 ch.
430 cd/m2
60,000 hours*
H: 170° V: 170°
1.0 W × 2
TV function
STEREO
CATV
Brightness
Lamp life (Fluorescent lamp)
Viewing angles
Audio amplifier
Speakers
137
/
64
× 411
/
in. (4 × 11 cm), 2 pcs.
32
INPUT1
COMPONENT-IN, AUDIO-IN
VIDEO-IN, S-VIDEO-IN, AUDIO-IN
AUDIO-OUT
INPUT2
Terminals
AUDIO OUT
Antenna
F-Type
Headphone
Mini-jack for stereo (ø3.5 mm)
English/Spanish/French
AC 120V, 60Hz
OSD language
Power supply
Power consumption
Weight (approx.)
43 W (0.8 W standby): AC 120V
50 W (0.8 W standby): AC 120V
70 W (0.8 W standby): AC 120V
9.0 lbs. (4.1 kg), w/o accessories 10.1 lbs. (4.6 kg), w/o accessories 15.2 lbs. (6.9 kg), w/o accessories
* Typical time for power output decrease of about one-half assuming continuous use in a room with normal lighting, normal brightness and
temperature at 77°F/25°C
■ As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improve-
ment without prior notice. The performance specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensional Drawings
Unit: inch (mm)
LC-13SH4U/LC-15SH4U/LC-20SH4U
45
3 41/64 92.1 / 3 /64 93.8
3
35
(
)
(
) /
(
/64 89.8
)
27
1 31
/
/ 1 /64 36
1
25
64 (37.7)
(
) /
(
/32 45
)
1
10 7/16 265 / 12
/8
307.6 15 /64 403.3
57
(
)
(
) /
(
)
29
11 29/32 302.4 11 /32 302.4 17 /64 436
) /
11
(
(
) /
(
)
)
19
17 17/32 444.9 / 19 /32 497.6 / 24 /64 620
27
(
)
(
)
(
53
5 53
7 17/32 191
/
5
/
5
/32 129
3
64 (148.3) /
64 (148.3) /
(
)
)
17
27
(
) /
(
) /
(
7
/32 191
7
/32 199.2
3 15/16 100
(
)
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling for Service
For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or customer
assistance, please call 1-800-BE-SHARP.
LIMITED WARRANTY
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it
will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured
equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide
proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE
LIMITEDTOTHE PERIOD(S) FROMTHE DATE OF PURCHASE SET FORTH BELOW.Some states do not allow limitations
on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any
way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion
of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVESYOU SPECIFIC LEGAL RIGHTS.YOU MAY ALSO HAVE OTHER RIGHTSWHICHVARY FROM
STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
LC-13SH4U/LC-15SH4U/LC-20SH4U
(Be sure to have this information available when you need
service for your Product.)
Warranty Period for this Product:
One (1) year parts and ninety (90) days labor from the date of
purchase.
Additional Item(s) Excluded from
Warranty Coverage (if any):
Non-rechargeable batteries.
Where to Obtain Service:
From a Sharp Authorized Servicer located in the United States.
To find the location of the nearest Sharp Authorized Servicer,
call Sharp toll free at 1-800-BE-SHARP.
Ship prepaid or carry in your Product to a Sharp Authorized
Servicer. Be sure to have Proof of Purchase available. If you
ship the Product, be sure it is insured and packaged securely.
What to do to Obtain Service:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
VALID IN CANADA ONLY
LIMITED WARRANTY
Consumer Electronics Products
Congratulations on your purchase!
Sharp Electronics of Canada Ltd. (hereinafter called “Sharp”) gives the following express warranty to the first consumer purchaser for this
Sharp brand product, when shipped in its original container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer:
Sharp warrants that this product is free, under normal use and maintenance, from any defects in material and workmanship. If any such
defects should be found in this product within the applicable warranty period, Sharp shall, at its option, repair or replace the product as
specified herein.
This warranty shall not apply to:
(a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate
use as outlined in the owner’s manual.
(b) Any Sharp product tampered with, modified, adjusted or repaired by any party other than Sharp, Sharp’s Authorized Service Centres
or Sharp’s Authorized Servicing Dealers.
(c) Damage caused or repairs required as a result of the use with items not specified or approved by Sharp, including but not limited to
head cleaning tapes and chemical cleaning agents.
(d) Any replacement of accessories, glassware, consumable or peripheral items required through normal use of the product including but
not limited to earphones, remote controls, AC adapters, batteries, temperature probe, stylus, trays, filters, belts, ribbons, cables and
paper.
(e) Any cosmetic damage to the surface or exterior that has been defaced or caused by normal wear and tear.
(f) Any damage caused by external or environmental conditions, including but not limited to transmission line/power line voltage or liquid
spillage.
(g) Any product received without appropriate model, serial number and CSA/cUL markings.
(h) Any products used for rental or commercial purposes.
(i) Any installation, setup and/or programming charges.
Should this Sharp product fail to operate during the warranty period, warranty service may be obtained upon delivery of the Sharp product
together with proof of purchase and
a
copy of this LIMITED WARRANTY statement to an Authorized Sharp Service Centre or an
Authorized Sharp Servicing Dealer. In home warranty service may be provided at Sharp’s discretion on any Sharp television with the
screen size of 27” or larger and on any Sharp Over-the-Range Microwave Oven.
This warranty constitutes the entire express warranty granted by Sharp and no other dealer, service centre or their agent or employee is
authorized to extend, enlarge or transfer this warranty on behalf of Sharp. To the extent the law permits, Sharp disclaims any and all
liability for direct or indirect damages or losses or for any incidental, special or consequential damages or loss of profits resulting from a
defect in material or workmanship relating to the product, including damages for the loss of time or use of this Sharp product or the loss
of information. The purchaser will be responsible for any removal, reinstallation, transportation and insurance costs incurred. Correction of
defects, in the manner and period of time described herein, constitute complete fulfillment of all obligations and responsibilities of Sharp
to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict
liability or otherwise.
WARRANTY PERIODS:
Parts & Labour (exceptions noted)
1 year
1 year
Audio Products
Camcorder
DVD Products
1 year
Projector
1 year (lamp 90 days)
LCD & Plasma Display TV
Microwave Oven
Television Products
VCR Products
1 year
1 year (magnetron component-4 additional years)
1 year (picture tube component-1 additional year)
1 year
1 year
Vacuum Cleaner
To obtain the name and address of the nearest Authorized Sharp Service Centre or Dealer, please contact:
SHARP ELECTRONICS OF CANADA LTD. 335 Britannia Road East, Mississauga, Ontario L4Z 1W9
For more information on this Warranty, Sharp Extended Warranty
Offers, Sharp Canada Products, Accessory Sales, Dealer or Service
Locations, please call (905) 568-7140
Visit our Web site: www.sharp.ca
Revision 04/22/03
Download from Www.Somanuals.com. All Manuals Search And Download.
|