Plasmacluster Ion Generator
OPERATION MANUAL
Device of this mark is a trademark of Sharp
Corporation.
Plasmacluster is a registered trademark or a
trademark of Sharp Corporation.
IG-CH2J
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
CONTENTS
...............
E-2
E-2
E-3
E-3
IMPORTANT SAFETY INSTRUCTIONS
...............................................................
• WARNING
......................
......................................
• CAUTIONS CONCERNING OPERATION
• INSTALLATION GUIDELINES
........................................................
E-4
E-4
E-4
E-4
E-5
E-5
PARTS NAME
...........................................................................
• .AIN UNIT
...............................................................
......................................................................
• CONTROL PANEL
• AC ADAPTER
• .AC.
• REAR
...................................................................................
...................................................................................
..................................................
E-6
E-6
E-7
INSTALLATION GUIDE
HOW TO SET A HELMET
OPERATION
.............................................
......................................................................
.............................
.............................................................................
E-8
E-8
E-8
E-9
CLEANING AND MAINTENANCE
• CA.INET
• GRILL
• FILTER
...................................................................................
.................................................................................
..................
• PLAS.ACLUSTER ION GENERATING UNIT
E-10
E-12
E-13
E-14
..........................................................
SPECIFICATIONS
TROUBLESHOOTING
..................................................
..............................
FOR CUSTOMER ASSISTANCE
• IG-CH2J decomposes and removes the bacteria attached
to the helmet with the Plasmacluster Ion and controls the
generation of odour, however, cannot remove the odour
sinking into the helmet.
• IG-CH2J cannot create a completely sterile environment.
SHARP does not guarantee its ability to prevent microbial
infection.
Thank you for purchasing this SHARP Plasmacluster Ion
Generator. Please read this manual carefully before using
Plasmacluster Ion Generator.
After reading, keep the manual in a convenient location for future
reference.
The information provided in this manual is subject to change
without notice.
E-1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Please read instructions carefully before using this unit as below.
When using electrical appliances, basic safety precautions should be
followed, including the following:
WARNING - To reduce the risk of electric shock, fire or injury :
• Use 220-240 volt outlet.
• .e sure to use the included AC adapter.
• Insert the AC adapter into the end of outlet surely.
• When you carry out the maintenance, be sure to pull out the AC adapter from the outlet.
• Periodically remove dust from the plug.
• When it thunders, stop the operation and pull out the AC adapter from the outlet.
• If a defect is generated (if you smell something burning), stop the operation and pull out
the AC adapter from the outlet.
• DO NOT damage the cord. DO NOT process, forcibly bend, pull, or twist the cord. DO
NOT place a heavy load on it or clip it.
• DO NOT remove the plug when your hands are wet.
• .any loads on the outlet is prohibited.
• DO NOT use the unit if the power cord or plug is damaged, or the connection to the wall
outlet is loosened.
• When you pull out the AC adapter and the plug for connecting the main unit, do not pull
the cord.
• When you carry the product, do not drop it or apply a shock to it.
• DO NOT drop drinkable water, cigarette ash, metals, or flammable item in the product
from air outlet or suction port.
• DO NOT operate when using aerosol insecticides or in rooms where there is oily residue,
incense, sparks from lit cigarettes, chemical fumes in the air, or in locations where the
unit may get wet, such as a bathroom.
• Only a Sharp Authori�ed Service Center should service this Plasmacluster Ion Generator.
Contact the nearest Service Center for any problems, adjustments, or repairs.
• DO NOT use the unit near or on hot objects, such as stoves or heaters or where it may
come into contact with steam.
• Remove drops of water on the helmet when it is has rained.
• DO NOT use the product in a place where the water is poured or the humidity level is
high.
• DO NOT use the product at the place where is subjected to direct sunlight.
• Children should be supervised to ensure that they do not play with the appliance.
• DO NOT use the unit near gas appliances or ꢀreplaces�
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS CONCERNING OPERATION:
• Do not ride the main unit and do not sit on or lean it, it may cause injury or malfunction.
• DO NOT block the air intake and�or air outlet.
• DO NOT use the unit near or on hot objects, such as stoves or heaters or where it may
come into contact with steam.
• .e cautious when cleaning the unit.
Strong corrosive cleansers may damage the exterior.
• Do not use items of silicone-containing products* near the unit.
The fluororesin or silicone could get stuck inside the unit, preventing it from producing
plasmacluster ions.
If this happens, remove dust from the needle electrode of the Plasmacluster Ion
Generating Unit. (See E-10)
* Hair care products (split end coatings, hair mousses, hair treatments, etc.), cosmetics,
antiperspirants, antistatic agents, waterproofing sprays, polishes, glass cleaners,
chemical absorbed clothes, wax, etc.
INSTALLATION GUIDELINES:
• Avoid using in locations where the unit is exposed to condensation or drastic
temperature changes. Appropriate room temperature is between 0-40�C.
• Avoid locations where grease or oily smoke is generated, otherwise the main unit
surface may crack as a result.
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS NAME
MAIN UNIT
Louver
Suction port
CONTROL PANEL
OPERATION light
(blue)
FILTER CLEAN
(orange)
light
ON/OFF button
AC ADAPTER
AC plug
DC plug
(Unit Connection Plug)
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
BACK
Air outlet
Plasmacluster Ion Generating Unit
Сleaning brush
DC jack
REAR
Filter
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION GUIDE
Connection of AC adapter and installation of main unit
Insert the DC plug of AC
1
2
adapter in the DC jack of
the main unit.
DC jack
DC plug
Insert the AC plug of AC
adapter in the outlet.
AC plug
AC adapter
Place the main unit at the level place in the room.
Precautions on installation
• .e sure to place the product on a stable surface.
• Do not block the suction port and the air outlet.
3
• If the Plasmacluster Ion Generator causes interference to radio or television
reception, try to correct the interference by one or more of the following measures:
• Adjust or relocate the receiving antenna.
• Increase the distance between the product and radio�TV receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio�TV technician for help.
HOW TO SET UP HELMET ON PCI UNIT
• Be sure to turn up the shield to have circulation of air.
• Wipe helmet of any water droplets if any.
< Full-face type>
<Open-face type>
<Half type>
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not block the suction port when setting the helmet.
Suction port
Suction port
OPERATION
Press the ON/OFF button to turn on.
ON/OFF
button
If you press the ON/OFF button, the
OPERATION light (blue) lights up and the
operation is started.
OPERATION light
In order to obtain the effect of Plasmacluster ion, operate the product for 8 hours*
or more.
* Varies depending on the condition of the helmet. If you cannot feel the effect after the
product is operated for 8 hours or more, operate it continuously.
Press the ON/OFF button to turn off.
ON/OFF
If you press the ON/OFF button, the
OPERATION light (blue) goes out and the
operation is stopped.
button
OPERATION light
If the odour cannot be removed sufficiently after the product is operated for 8
hours or more, the helmet may absorb the odour. Use IG-CH2J after removing
the absorbed odour by cleaning service. Then, newly attached bacteria is
removed and the odour is not generated easily.
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
CLEANING AND MAINTENANCE
At the cleaning or maintenance, stop the operation and pull out the plug of AC
adapter for connecting the main unit.
At least once a month
CABINET
Wipe off the taint with a soft cloth.
<For Stubborn Dirt>
Using clean soapy water, wipe
off the cleaning substance
completely.
At least once a week
GRILL
Remove the dust with a vacuum cleaner.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
If the FILTER CLEAN light is (orange)
FILTER
Even if the FILTER CLEAN light (orange) does not light, it is recommended to
carry out the cleaning once a week.
2
Remove the filter.
1
1
The filter is attached to the rear of
the main unit.
Clip the tabs on both sides of the
filter and pull it out.
1
Tabs
Clean up the filter.
2
3
Gently remove the dust attached to the
filter with a vacuum cleaner.
Do not press the filter with force with a
vacuum cleaner. Otherwise, it is damaged.
<For Stubborn Dirt>
Remove and rinse in water. (Use a soft sponge if the dirt does not come off
easily.) And dry it at the sun shadow place.
Filter
Set the filter on the main unit.
Insert the filter until the stopper of tab is inserted into the main unit
firmly.
Filter
Stopper
Do not operate the product while the filter is removed.
The dust comes in the main unit and it may cause a failure.
Press the ON/OFF button
4 for 3 seconds.
ON/OFF
button
The FILTER CLEAN light flashes twice and
go off. Even if the FILTER CLEAN light is
off, press ON�OFF button for 3 seconds after
cleaning.
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
PLASMACLUSTER ION
GENERATING UNIT
It is recommended to carry out the cleaning once every 6 months.
Remove the louver.
1
Hold the main unit with a hand and then pull out the louver.
Louver
Remove the cleaning brush.
Remove the cleaning brush attached to the main unit.
2
Сleaning brush
Clean up the needle electrode of the Plasmacluster Ion
Generating Unit.
Remove the dust from the needle electrode with using the cleaning
brush.
3
Сleaning brush
Needle electrode
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Attach the cleaning brush.
4
5
Attach the cleaning brush
to the pin of the cabinet.
Pin
Attach the louver.
Hold the main unit with a
hand and attach the louver
to the cabinet.
Louver
Cabinet
Do not operate the product while the louver is removed.
The strip of the helmet or other item touches the electrode of the
Plasmacluster Ion Generating Unit and it may cause a failure.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Model
IG-CH2J
Power supply
AC adapter
Rated input
AC220V-240V • 50�60H� • 0.3A
Rated output
DC12V • 1A
3
Power consumption (W)
165 (W) × 233 (D) × 121 (H)
(Not including AC adapter)
Outer dimensions (mm)
Power cord length (m)
(AC adapter)
1.8
0.57
Weight (kg)
(Not including AC adapter)
AC Adapter � Operation manual
ACCESSORIES
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Problem
WHAT TO DO
• The OPERATION light (blue) does
not light up.
• Is the AC adapter installed correctly?
Connect correctly. (See page E-6)
(The Plasmacluster Ion Generator
does not work.)
OPERATION light
• The FILTER CLEAN light (orange)
is lighting.
• Filter is getting dirty. Clean the filter.
(See E-9)
After cleaning the ꢀlter, press ON/OFF
button for 3 seconds.
FILTER CLEAN light
• Failure
• The OPERATION light (blue) and
the FILTER CLEAN light (orange)
are flashing.
Unplug the AC adapter and contact
the store you purchased or Sharp
Authori�ed Service Center.
OPERATION light
FILTER CLEAN light
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
SHARP CORPORATION OF AUSTRALIA PTY.LTD.
A. B. N. 40 003 039 405
1 HUNTINGWOOD DRIVE, HUNTINGWOOD, N.S.W. 2148
P.O.BOX 6827, BLACKTOWN. N.S.W. 2148
SHARP CORPORATION OF NEW ZEALAND LIMITED
59 HUGO JOHNSTON DRIVE, PENROSE, AUCKLAND
Printed in China
CN
1
TINS-A515..RZ 11.-
Download from Www.Somanuals.com. All Manuals Search And Download.
|