LC-40LE810UN
LC-46LE810UN
LC-52LE810UN
LC-60LE810UN
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D'EMPLOI
MANUAL DE OPERACIÓN
IMPORTANT : Please read this operation manual before starting operating the equipment.
IMPORTANT : Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil.
IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.
Download from Www.Somanuals.com. All Manuals Search And Download.
LC-40LE810UN
LC-46LE810UN
LC-52LE810UN
LC-60LE810UN
LIQUID CRYSTAL TELEVISION
ENGLISH
OPERATION MANUAL
IMPORTANT:
Model No.:
Serial No.:
To aid reporting in case of loss or theft, please record the
TV's model and serial numbers in the space provided. The
numbers are located at the rear of the TV.
IMPORTANT INFORMATION
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING:
The lightning flash with arrow-head
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within a
triangle is intended to alert the user
to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the product.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly
approved by the manufacturer could void the user's authority to operate this equipment.
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded
cables and connectors for connections.
DECLARATION OF CONFORMITY:
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-40LE810UN/LC-46LE810UN/LC-52LE810UN/LC-60LE810UN
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
TEL: 1-800-BE-SHARP
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
“Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National
Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.”
This product qualifies for ENERGY STAR when "Home" is selected for "TV Location".
Setting "TV Location" to "Home" allows the TV to achieve an energy-saving status for household use.
Trademarks
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
• Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy
efficiency.
•
and LC logo mark are registered trademarks of SHARP Corporation.
This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly
displaying easy-to-read characters on LCD screens. However, other fonts are used for some screen pages, too.
• “x.v.Color” and
are trademarks of Sony Corporation.
• Netflix and the Netflix logo are the registered trademarks of Netflix, Inc.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years
of trouble-free operation of your product, please read the Important Safety Instructions carefully before
using this product.
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage
if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please
observe the following instructions when installing, operating and cleaning the product. To ensure your safety
and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully
before using the product.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Additional Safety Information
15) Power Sources—This product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer to the
operating instructions.
16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this
can result in a risk of fire or electric shock.
17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment
of other controls may result in damage and will often require extensive work by a qualified technician
to restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicates a need for service.
19) Replacement Parts—When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product
according to the method recommended by the manufacturer.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
• Outdoor Antenna Grounding — If an outside antenna is
connected to the television equipment, be sure the antenna
system is grounded so as to provide some protection against
voltage surges and built-up static charges.
ANTENNA
LEAD IN WIRE
Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC — NATIONAL ELECTRICAL CODE
• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base
can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product
on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the
manufacturer.
• Selecting the location — Select a place with no direct sunlight and good ventilation.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place
the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not
designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper
ventilation is provided or the manufacturer's instructions are followed.
• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.
• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
• The Liquid Crystal panel is a very high technology product with 2,073,600 pixels, giving you fine picture details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that
this does not affect the performance of your product.
• Lightning — For added protection for this television equipment during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to
the equipment due to lightning and power-line surges.
• Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
• To prevent fire, never place any type of candle or flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• To prevent fire or shock hazard, do not expose this product to dripping or splashing.
No objects filled with liquids, such as vases, should be placed on the product.
• Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may
result in fire or electric shock. Exercise special caution when using the product around children.
Precautions when transporting the TV
• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always
carry the TV by two people holding it with two hands — one hand on each side of the TV.
Caring for the Cabinet
• Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.
• Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause
cracking.
• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
• If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in neutral detergent diluted with water and
thoroughly wrung out, and then wipe with a soft dry cloth.
• The cabinet is primarily made of plastic. Avoid using benzene, thinner, and other solvents, as these may deform the
cabinet and cause the paint to peel off.
• Do not apply insecticides or other volatile liquids.
Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time. Plasticizers
inside the plastic may cause the cabinet to deform and cause the paint to peel off.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Caring for the Liquid Crystal panel
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Gently wipe the surface of the display panel with a soft cloth (cotton, flannel, etc.).
To protect the display panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/
dry sheet type cloth, etc.). This may damage the surface of the display panel.
• Wiping with a hard cloth or using strong force may scratch the surface of the display panel.
• Use a soft damp cloth to gently wipe the display panel when it is really dirty.
(It may scratch the surface of the display panel when wiped strongly.)
• If the display panel is dusty, use an anti-static brush, which is commercially available, to clean it.
• To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are
available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP for
CHILD SAFETY:
It Makes A Difference How and Where You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
• The home theater entertainment experience is a growing trend and larger flat panel displays
are popular purchases. However, flat panel displays are not always supported on the proper
stands or installed according to the manufacturer’s recommendations.
• Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks,
speakers, chests or carts may fall over and cause injury.
THIS MANUFACTURER CARES!
• The consumer electronics industry is committed to making home entertainment enjoyable
and safe.
TUNE INTO SAFETY
• One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation
and use of your flat panel display.
• Carefully read and understand all enclosed instructions for proper use of this product.
• Don’t allow children to climb on or play with furniture and television sets.
• Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest
of drawers.
• Remember that children can become excited while watching a program, especially on a
“larger than life” flat panel display. Care should be taken to place or install the display where it
cannot be pushed, pulled over, or knocked down.
• Care should be taken to route all cords and cables connected to the flat panel display so that
they cannot be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
• Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such
as UL, CSA, ETL).
• Follow all instructions supplied by the display and wall mount manufacturers.
• If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional
installation.
• Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be
mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer.
• A minimum of two people are required for installation. Flat panel displays can be heavy.
Note: CEA is the preeminent trade association promoting growth in the $161 billion
U.S. consumer electronics industry. More than 2,200 companies enjoy the benefits of
CEA membership, including legislative advocacy, market research, technical training and
.
education, industry promotion and the fostering of business and strategic relationships
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
IMPORTANT INFORMATION ..................... 1
Trademarks ....................................... 2
DEAR SHARP CUSTOMER ....................... 3
IMPORTANT SAFETY INSTRUCTIONS ........ 3-5
On-Screen Display Menu
On-Screen Display Menu Operation ........... 22
Menu Operation Buttons ...................... 22
Menu Items ................................... 23
Picture Settings ............................ 24-25
Audio Settings ................................ 26
Power Control................................. 27
System Options ............................ 28-30
Initial Setup................................. 30-33
Information................................. 34-36
Supplied Accessories ............................ 7
QUICK REFERENCE
Attaching the Stand ............................ 7
QUICK INSTALLATION TIPS ................... 8
Using the Remote Control Unit ................. 8
Enjoying Photo and Music Playback
Preparation
Viewing Photos and Listening to Music ........ 37
Photo Mode................................ 38-39
Music Mode................................... 40
USB Memory Device Compatibility............. 40
Antennas....................................... 9
Installing Batteries in the Remote Control Unit... 9
Part Names
TV (Front) ..................................... 10
TV (Rear) ...................................... 10
Remote Control Unit........................... 11
Other Viewing Options
Presetting Remote Control Function ........... 41
Operating the Connected Equipment ....... 41-42
Introduction to Connections
Using AQUOS LINK
Experiencing HD Images ...................... 12
Types of Connection .......................... 12
Displaying an External Equipment Image....... 12
Controlling HDMI Equipment
Using AQUOS LINK....................... 43-45
Link Operation Menu ....................... 45-46
Connecting to External Equipment
Using a PC
Connecting a Blu-ray Disc/DVD Player or
HD Cable/Satellite Set-top Box ........... 13-14
Connecting a VCR, Game Console,
Displaying a PC Image on the Screen.......... 47
Adjusting the PC Image ....................... 48
Setting Audio Input............................ 48
PC Compatibility Chart ........................ 48
RS-232C Port Specifications .................. 49
Camcorder or Cable/Satellite Set-top Box.... 14
Connecting an Audio Amplifier................. 15
Connecting a PC .............................. 16
Using the Internet
Watching TV
Internet Setup .............................. 50-51
Displaying Updated Information and
Support Service ............................. 51
Entering Text (Software Keyboard)............. 52
Using the Browser.......................... 53-56
Instantly Watching Movies from Netflix ...... 57-59
Turning On/Off the Power ..................... 17
Initial Installation ............................... 17
Direct Button Operation
Changing Channels ....................... 18
Changing Volume .......................... 18
MUTE ...................................... 18
Sleep Timer ................................ 18
FLASHBACK............................... 18
SURROUND ............................... 18
FREEZE.................................... 18
INPUT...................................... 19
AV MODE .................................. 19
AUDIO ..................................... 19
DOCK...................................... 20
POWER SAVING ........................... 20
Closed Captions and
Appendix
Removing the Stand........................... 60
Setting the TV on the Wall ..................... 61
Troubleshooting............................ 62-63
Troubleshooting - Error Message .............. 63
Specifications .............................. 64-65
Optional Accessory............................ 65
Information on the Software License for
This Product................................. 66
Calling for Service ............................... 67
LIMITED WARRANTY............................ 67
Digital Closed Captions ................... 20
VIEW MODE ............................... 21
Dimensional Drawings
• The dimensional drawings for the LCD TV set are shown
on the inside back cover.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied Accessories
Make sure the following accessories are provided with the product.
LC-40LE810UN/
LC-46LE810UN/
LC-52LE810UN
Remote control unit
1)
“AAA” size battery
2)
Cable clamp
1)
Page 8
Stand unit
Operation manual
1)
(
(
(
(
1)
(
g
g
g
g
g
Page 8
Page 9
Page 7
Connection guide ( 1)
■
g
• Always use the AC cord supplied with the TV.
• The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
QUICK REFERENCE
Attaching the Stand
• Before attaching (or detaching) the stand, unplug the AC cord.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Confirm that there are 9 screws (5 short screws
and 4 long screws) supplied with the stand unit.
Insert and tighten the 4 screws into the 4 holes on
the rear of the stand unit.
1
4
Short screws
Attach the supporting post for the stand unit onto
the base using the box for the stand unit as shown
below.
2
• The supporting post attaches to the base at an off-
centered location on the base. Be sure to attach the
supporting post in the direction indicated below and
attach the stand to the TV with the wider side of the
base facing forward.
Long screws
Insert the stand cover.
Insert the screw to secure the stand cover.
5 1
2
2
Short screw
Insert the stand into the openings on the rear of the
TV.
3
1
Soft cushion
• To detach the stand, perform the steps in reverse
order.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE
QUICK INSTALLATION TIPS
Using the Remote Control Unit
Use the remote control unit by pointing it towards the
remote control sensor on the TV. Objects between the
remote control unit and the remote control sensor may
prevent proper operation.
Attach your antenna to the back of the television.
(See page 9.)
1
Connect the AC plug for the television into the AC
outlet.
2
2
1
1
AC outlet
• Place the TV close to the AC outlet, and keep the power
plug within reach.
17´ (5 m)
30º
30º
Remote control sensor
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
30º
30º
Bundle the cords properly with the cable clamp.
3
Cautions regarding the remote control unit
■
• Do not expose the remote control unit to shock. In addition,
do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
• Do not install or place the remote control unit under direct
sunlight. The heat may cause deformation of the remote
control unit.
• The remote control unit may not work properly if the remote
control sensor on the TV is under direct sunlight or strong
lighting. In such cases, change the angle of the lighting
or the TV, or operate the remote control unit closer to the
remote control sensor.
When turning on the TV for the first time, press
4
POWER on the touch sensor panel on the front of
the TV.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE
TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT
US AT 1-800-BE-SHARP.
POWER
Insert the batteries into the remote control unit. (See
page 9.)
5
• Speakers cannot be detached from the TV.
• The TV can be rotated up to 20 degrees to right and left.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections
that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector,
plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use
commercially available cables.
Connecting Antenna
Cable
• Connect the antenna cable to the TV using one of the methods in the illustration as shown (
,
,
or
).
4
1 2 3
Home Antenna
terminal (75-ohm)
Cable TV lead-In
Cable without a CATV
converter
1
2
Coaxial cable
Home Antenna
VHF/UHF antenna
terminal (75-ohm)
75-ohm coaxial cable (round)
75-ohm coaxial cable (round)
Coaxial cable
Combination VHF/
UHF antenna
3
or
300/75-ohm adapter
300-ohm twin-lead cable (flat)
VHF
UHF
Separate VHF/UHF
antenna
4
300-ohm
twin-lead cable
ANTENNA ANTENNA
IN
OUT
300-ohm twin-lead cable
75-ohm coaxial cable
To TV antenna
terminal
Combiner
or
F-type connector
75-ohm coaxial cable (round)
1.A 75-ohm system is generally a round cable with F-type connector
that can easily be attached to a terminal without tools.
2.A 300-ohm system is a flat “twin-lead” cable that can be attached
to a 75-ohm terminal through a 300/75-ohm adapter.
300-ohm twin-lead cable (flat)
NOTICE
F-type connector should be finger-tightened only.
F-type connector
When connecting the RF cable to the TV set, do not tighten F-type
connector with tools.
If tools are used, it may cause damage to your TV set. (The breaking
of internal circuit, etc.)
75-ohm coaxial cable
Installing Batteries in the Remote Control Unit
If the remote control fails to operate TV functions, replace the batteries in the remote control unit.
1 Open the battery cover.
2 Insert two “AAA” size batteries (supplied with
the product).
3 Close the battery cover.
• Place the batteries
with their terminals
corresponding to the (
)
e
and ( ) indications in the
f
battery compartment.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage
in old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a
rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names
TV (Front)
Center Icon illumination (See page 30.)
Remote control sensor
OPC sensor *1
(See page 24.)
VOL
/
INPUT POWER *2
V U
l k
CH
/
MENU
*1 OPC: Optical Picture Control
*2 See pages 17 and 22 for using the touch sensor panel.
TV (Rear)
*1
USB 1 terminal
ETHERNET terminal
AUDIO OUT terminal
INPUT 2 terminal
INPUT 3 terminal (PC-IN)
AUDIO IN terminal
(shared for INPUT 3 and INPUT 4) *2
INPUT 4 terminal (HDMI)
ARC: Audio Return Channel
INPUT 5 terminal (HDMI)
INPUT 6 terminal (HDMI)
INPUT 7 terminal (HDMI)
*1
DIGITAL AUDIO OUTPUT terminal
Antenna/Cable in
RS-232C terminal
INPUT 1 terminals
USB 2 terminal
*1 See pages 12 to 16 and 43 for external equipment connection.
*2 See page 48 for details on the Audio Select function.
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• The examples used throughout this manual are based on the LC-52LE810UN model.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names
1
2
POWER: Switch the TV power on or enter standby. (See page
17.)
Remote Control Unit
1
TV, STB, DVD•VCR, AUDIO: Switches the remote control for
TV, STB, DVD, BD, VCR and AUDIO operation. (See pages 41 to
42 for details.)
* To enter the code registration mode, you need to press an
appropriate button (STB, DVD•VCR or AUDIO) and DISPLAY
at the same time.
19
20
3
4
External equipment operational buttons: Operate the external
equipment.
2
3
OPTION: Display the Link Operation Menu screen. This button
will function only when AQUOS LINK is used. (See pages 43 to 46
for details.)
5
6
7
8
9
SLEEP: Set the sleep timer. (See page 18.)
0–9: Set the channel. (See page 18.)
4
5
21
22
• (DOT): (See pages 18 and 41.)
CC: Display captions from a closed-caption source. (See page 20.)
AV MODE: Select an audio or video setting. (See page 19.)
10 MUTE: Mute the sound. (See page 18.)
11 VOL : Set the volume. (See page 18.)
6
/
k l
12 MENU: Display the menu screen. (See page 22.)
13 AQUOS NET: Switches the display to the Sidebar Widget,
TV Web, Web or TV screen. (See pages 50 to 58 for details.)
k
7
23
14
/
/
/
, ENTER: Select a desired item on the screen.
a b c d
24
25
8
9
15 EXIT: Turn off the menu screen.
16 SURROUND: Select Surround settings. (See page 18.)
17 FAVORITE CH: Set the favorite channels. (See page 31.)
10
11
12
26
27
18 A, B, C, D: Select 4 preset favorite channels in 4 different
categories. (See page 31.)
While watching, you can toggle the selected channels by pressing
A, B, C and D.
28
13
14
19 DISPLAY: Display the channel information.
20 POWER (SOURCE): Turns the power of the external equipment
on and off.
21 REC STOP: Stops one touch recording. This button will function
only when AQUOS LINK is used. (See pages 43 to 45 for details.)
29
30
31
15
16
17
18
22 POWER SAVING: Select Power Saving settings. (See page 20.)
23 ENT: Jumps to a channel after selecting with the 0–9 buttons.
24 FLASHBACK: Return to the previous channel or external input
mode. (See page 18.)
25 VIEW MODE: Select the screen size. (See pages 21, 47 and 59.)
26 INPUT: Select a TV input source. (TV, INPUT 1, INPUT 2, INPUT 3,
INPUT 4, INPUT 5, INPUT 6, INPUT 7) (See pages 12 and 19.)
27 CH : Select the channel. (See page 18.)
/
r s
28 DOCK: Display the DOCK. (See page 20.)
29 RETURN: Return to the previous menu screen.
30 AUDIO: Selects the MTS/SAP or the audio mode during multi-
channel audio broadcasts. (See page 19.)
31 FREEZE: Set the still image. Press again to return to normal
screen. (See page 18.)
• When using the remote control unit, point it at the TV.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction to Connections
Experiencing HD Images
An HDTV without an HD source is just an ordinary TV.
To enjoy HD images on the TV, you should get HD programming from the following:
• Over-the-air broadcasting via HD quality antenna
• HD cable/satellite subscription
• HD compatible external equipment
• For information on updating to HD programming, ask your cable/satellite service provider.
Types of Connection
Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your
external equipment and use its appropriate terminals for higher quality images.
• The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.
Image Terminal on external
Terminal
on the TV
Cable
Quality
equipment
HD
Quality
HDMI-certified cable
Page 13
Page 13
Ø 3.5 mm stereo minijack cable
DVI-HDMI conversion cable
AUDIO
DVI OUT
Component video cable
Audio cable
Page 14
Page 14
AV cable
(AV mini plug and RCA plugs)
Standard
Quality
Displaying an External Equipment Image
To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.
Example
Press INPUT.
• The CH List screen displays.
1
Menu
CH List
Press
/
to select the input source.
a b
2
CABLE AIR
• You can also select the input source by pressing
INPUT. Each time INPUT is pressed, the input source
toggles.
INPUT
INPUT
TV
INPUT1
INPUT2
INPUT3
TV
INPUT4
INPUT1
INPUT2
INPUT3
• An image from the selected source automatically
displays.
• If the corresponding input is not plugged in, you
cannot change the input. Be sure to connect the
equipment beforehand.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Equipment
You can connect many types of external equipment to your TV. To view external source images, select the input
source from INPUT on the remote control unit or on the TV. (See pages 12 and 19.)
For connecting the TV to external equipment, use commercially available cables.
CAUTION
• To protect equipment, always turn off the TV before connecting any external equipment.
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box
When using HDMI cable (INPUT 4, 5, 6 or 7):
■
The HDMI (High Definition Multimedia Interface) terminal is an audio-video interface that enables a connection for audio and
video signals using a single cable. The HDMI terminal supports high-resolution video input.
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
Back panel
vertical inputs
HDMI-certified cable
HDMI OUT
• To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a component cable and
set the equipment to 1080p output.
• Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
• When you connect external equipment using a DVI-HDMI conversion cable or when you connect ARC-compatible
equipment, use INPUT 4.
When using DVI-HDMI conversion cable (INPUT 4):
■
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
Back panel
vertical inputs
Ø 3.5 mm stereo minijack cable
DVI-HDMI conversion cable
AUDIO
DVI OUT
• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the INPUT 4 (HDMI) terminal, connect a Ø 3.5 mm stereo minijack cable to the
AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 48.)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Equipment
When using Component cable (INPUT 1):
■
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
Audio cable
P
R
(Red)
(Blue)
Component video cable
AUDIO-R (Red)
AUDIO-L (White)
P
B
Y (Green)
COMPONENT OUT
Back panel
horizontal inputs
• To enjoy 1080p display capability, connect your external equipment using an HDMI-certified cable or a component cable and
set the equipment to 1080p output.
• See page 13 for connecting a Blu-ray disc player, DVD player or an HD cable/satellite set-top box to the HDMI terminal.
Connecting a VCR, Game Console, Camcorder or Cable/Satellite Set-top Box
When using Composite cable (INPUT 2):
■
• Game console
• Camcorder
• VCR
• Cable/Satellite set-top box
Back panel
vertical inputs
AV cable (AV mini plug and RCA plugs)
• For the AV cable to connect to the INPUT 2 terminal, use a plug described below.
Pin number
Description
AUDIO (LEFT)
1
2
3
4
Composite Video
A&V Ground (EARTH)
AUDIO (RIGHT)
1
2
3
4
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Equipment
Connecting an Audio Amplifier
When using optical fiber cable:
■
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 28 for details.) PCM audio
outputs from the terminal.
Back panel
vertical inputs
Optical fiber cable
OPTICAL
DIGITAL AUDIO INPUT
• Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI
connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz.
When using audio cable:
■
Back panel
vertical inputs
Audio cable
ANALOG AUDIO IN
• See page 29 for details on the Output Select function.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Equipment
Connecting a PC
Refer to page 48 for a list of PC signals compatible with the TV.
When using HDMI cable (INPUT 4, 5, 6 or 7):
■
Back panel
vertical inputs
HDMI-certified cable
HDMI OUT
• Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable to
the INPUT 4 (HDMI) terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to
"HDMI+Analog". (See page 48.)
• The HDMI terminals only support digital signal.
When using DVI-HDMI conversion cable (INPUT 4):
■
Back panel
vertical inputs
Ø 3.5 mm stereo minijack cable
DVI-HDMI conversion cable
AUDIO
DVI OUT
• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the INPUT 4 (HDMI) terminal, connect a Ø 3.5 mm stereo minijack cable to the
AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 48.)
When using analog RGB cable (INPUT 3):
■
Back panel
vertical inputs
Analog RGB cable
(D-sub 15-pin cable or VGA cable)
Ø 3.5 mm stereo minijack cable
RGB
AUDIO
• When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of INPUT 3.
• When connecting a PC to the INPUT 3, set "Audio Select" to "Video+Audio". (See page 48.)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Turning On/Off the Power
Press POWER on the TV or on the remote control unit to turn the
power on.
• The Initial Installation starts when the TV powers on for the first time. If the
TV has been turned on before, the Initial Installation will not be invoked. For
changing the settings of the Initial Installation, perform "EZ setup" on the Initial
Setup menu on page 30.
POWER
POWER
Press POWER on the TV or on the remote control unit again to turn the
power off.
(On/Standby) • The TV enters standby and the image on the screen disappears.
• If you are not going to use this TV for a long period of time, be sure to remove
the AC cord from the AC outlet.
• Weak electric power is still consumed even when the TV is turned off.
Initial Installation
When you turn on the TV for the first time, it will
automatically memorize the broadcasting channels
available in the region where you live. Perform the
following steps before you press POWER on the
remote control unit.
1. Insert the batteries into the remote control unit. (See page 9.)
2. Connect the antenna cable to the TV. (See page 9.)
3. Plug in the AC cord to the AC outlet. (See page 8.)
ENERGY STAR qualification is based on AV MODE "STANDARD".
Air/Cable (Antenna setting)
Make sure what kind of connection is made with your TV
when selecting "Air" or "Cable".
Press
/
to select "Air" or "Cable".
c d
3
Press ENTER to enter the setting.
Air
Cable
CH Search (Channel search)
Channel auto search makes the TV look for all channels
viewable in the set area.
When "Air" is selected in Antenna setting:
4
Language (Language setting)
Select from among 3 languages: English, French and Spanish.
Press
/
to select "Start", and then press ENTER.
c d
Press
/
to select the desired language listed on the
a b
1
Start
Cancel
screen, and then press ENTER.
Language
TV Location
Air/Cable
English
Français
Español
When "Cable" is selected in Antenna setting:
Press
/
to select "Analog & Digital Search Start" to
a b
CH Search
search both analog and digital broadcasts, or to select
“Analog Search Start” to search only analog broadcasts,
and then press ENTER.
TV Location
Select "Home" or "Store" for the location where you plan to
install the TV. This product qualifies for ENERGY STAR in
Home mode default setting.
Analog & Digital Search Start
Analog Search Start
Cancel
Press
/
to select "Home" or "Store".
c d
2
Press ENTER to enter the setting.
• The Channel search will start automatically.
• To exit the Channel search screen, select "Cancel", and
then press ENTER.
Select
Home
Store
Home: “Power Saving” is set to "Advanced", and AV
MODE is set to "STANDARD".
• If no channel is found, confirm the type of connection
made with your TV and try "EZ Setup" again.
(See page 30.)
• For changing the settings of the Initial Installation, perform
"EZ setup" on the Initial Setup menu on page 30.
Store: “Power Saving” is set to "Off" and AV MODE is set to
"DYNAMIC (Fixed)". Picture Reset and Feature Demo can
be set.
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset is "On" or "Off". If you
select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if
there is no operation for 30 minutes. When "Off" is selected,
AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When “On” is selected, after all the settings are
completed, the Feature Demo screen is displayed if there is
no operation for several minutes.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct Button Operation
MUTE
Mutes the current sound output.
Press MUTE.
• " " will be displayed on the screen for 30 minutes, and
the sound is silenced.
• Within 30 minutes of pressing MUTE, mute can be
canceled by pressing VOL
/
or MUTE.
k l
• Mute will be canceled after 30 minutes have passed.
However, the TV will not suddenly output a loud sound as
the volume level is set to 0 automatically.
Sleep Timer
Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP.
•
The remaining time displays when the sleep timer has been set.
Changing Channels
You can change channels in several ways.
• Each time you press SLEEP, the remaining time switches
as shown below.
Off
30
60
90
120
Method 1
/
r s
Using CH
on the remote control unit or on the TV.
• When set, the time automatically starts counting down.
• If you want to adjust the sleep timer, you can press SLEEP
twice then change the time setting.
• When it is 5 minutes before the time expires, the remaining
time will start to keep appearing every minute.
Method 2
Using remote control buttons 0-9, • (DOT).
Examples:
To select a 1 or 2-digit channel number (e. g., Channel 5):
Press 5
ENT.
To select a 3-digit channel number (e. g., Channel 115):
Press 1 ENT.
To select a 4-digit channel number (e. g., Channel 22.1):
Press 2 • (DOT) ENT.
1
5
• Select "Off" by pressing SLEEP to cancel the sleep timer.
•
The TV will enter standby when the remaining time reaches 0.
2
1
FLASHBACK
Method 3
Selecting the program from CH List.
Press FLASHBACK to switch to the previously tuned
channel.
Press
INPUT on the remote control unit.
1
2
3
• Press FLASHBACK again to switch back to the currently
• The CH List screen displays.
tuned channel.
/
Press c d to select "CABLE" or "AIR".
• A list of viewable programs is displayed.
• FLASHBACK will not work if no channel has been
changed after the TV is turned on.
Press
/
to select the desired channel, and then
a b
press ENTER.
SURROUND
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
The surround function produces Surround effect from
the speakers. Each time you press SURROUND, the
mode changes between On and Off.
On: Makes it possible to enjoy natural, realistic surround
sound.
• When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
• If you push "0" by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter 0-9 and • (DOT), channel selection will be
made if there is no operation within a few seconds.
Off: Outputs the normal sound.
• You can have the same settings by choosing "Surround"
on the menu items. (See page 26.)
Changing Volume
You can change the volume by pressing VOL
/
on
k l
FREEZE
the TV or on the remote control unit.
• To increase the volume, press VOL
.
l
Allows you to capture and freeze a moving image that
k
• To decrease the volume, press VOL
.
you are watching.
Press FREEZE.
20
• A moving image is captured.
Audio status
• Press FREEZE again to cancel the function.
Output Select
Output device
Speaker
• When this function is not available, "No displaying still
image available." will display.
Fixed
Variable
Variable sound
Mute
• The still image automatically goes out after 30 minutes.
• If you are using the freeze function and a broadcast
activates the V-CHIP BLOCK, the freeze function will be
canceled and a V-CHIP BLOCK message will appear.
• You can have the same settings by choosing "Freeze" on
the menu items. (See page 28.)
• When "Output Select" is set to "Variable", the indicator on
the screen changes as shown below.
60
• See page 29 for details on the Output Select function.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct Button Operation
INPUT
AUDIO
To view external source images, select the input source by
MTS/SAP stereo mode
■
pressing INPUT on the remote control unit or on the TV.
The TV has a feature that allows reception of sound
other than the main audio for the program. This feature
is called Multi-channel Television Sound (MTS). The TV
with MTS can receive mono sound, stereo sound
and Secondary Audio Programs (SAP). The SAP
feature allows a TV station to broadcast other
information, which could be audio in another language
or something completely different like weather
information.
Press
INPUT.
1
• The CH List screen displays.
Press
source.
/
or press INPUT again to select the input
a b
2
•
An image from the selected source automatically displays.
• Each time INPUT is pressed, the input source toggles.
•
If the corresponding input is not plugged in, you cannot change
the input. Be sure to connect the equipment beforehand.
You can enjoy Hi-Fi stereo sound or SAP broadcasts
where available.
• Stereo broadcasts: View programs like live sporting
events, shows and concerts in dynamic stereo sound.
• SAP broadcasts: Receive TV broadcasts in either MAIN
or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)
If stereo sound is difficult to hear.
• See pages 12 to 16 and 43 for external equipment
connection.
AV MODE
AV MODE gives you several viewing options to choose
from to best match the surrounding environment of the
TV, which can vary due to factors like room brightness,
type of program watched or the type of image input
from external equipment.
Press AV MODE. Current AV MODE displays.
• Press AV MODE again before the mode displayed on the
screen disappears. The mode changes as shown below:
• Obtain a clearer sound by manually switching to fixed
mono-sound mode.
Example:
You can change MTS as shown below to match the television
broadcast signal.
When the input source is TV, INPUT 1 or 2 terminals
AUTO
STANDARD
MOVIE
GAME
DYNAMIC (Fixed)
DYNAMIC
USER [TV]
Press AUDIO to toggle between audio modes.
Example:
Examples: when receiving MTS and SAP
When the input source is INPUT 3, 4, 5, 6 or 7
terminals
AUTO
STEREO
MONO
STEREO mode:
STEREO + SAP mode:
ST(SAP) SAP(ST)
MONO
STANDARD
GAME
PC
]
MOVIE
DYNAMIC (Fixed) DYNAMIC
x.v.Color* USER[
MAIN
SAP
MAIN + SAP mode:
MONO mode: MONO
* "x.v.Color" can only be selected when an x.v.Color
signal is input using INPUT 4 to 7.
Digital broadcasting audio mode
■
AUTO: Optimizes the image quality automatically based
on the room brightness and image signal.
STANDARD: For a highly defined image in a normal
lighting.
The types of audio transmitted in a digital broadcast include
SURROUND as well as MONO and STEREO. In addition, it
is possible for multiple audio tracks to accompany a single
video track.
MOVIE: For a movie.
GAME: Lowers image brightness for easier viewing.
PC: For PC.
Press AUDIO to toggle between audio modes.
Example: when receiving Digital broadcasting
USER: Allows the user to customize settings as desired.
You can set the mode for each input source.
x.v.Color: Supports the x.v.Color international standard
for wide color space. The x.v.Color signal allows you
to experience colors that conventional color signals
cannot reproduce.
STEREO (Audio1)
STEREO (Audio2)
SURROUND (Audio3)
• MTS only operates while in TV mode.
• You can have the same settings by choosing "Change
DYNAMIC: For a clear-cut image emphasizing high
contrast, useful for sports viewing.
Audio" on the menu items. (See page 28.)
DYNAMIC (Fixed): Changes the image and sound
settings to the factory preset values. No adjustments
are allowed.
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for INPUT 1.)
• When you play games, "GAME" is recommended for AV
MODE.
•
You cannot set "GAME" or "PC" when the TV is connected
to the Internet or when the input source is "USB".
• You can have the same settings by choosing "AV MODE"
on the menu items. (See page 24.)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct Button Operation
DOCK
Allows you to directly activate various types of
applications.
Press CC.
1
2
• This will present the Closed Caption information
display.
Press CC while the Closed Caption information is
still on the screen.
• Press repeatedly until you select the desired closed
caption service.
• See pages 37, 51 and 57 for details of viewable
applications.
• You can display the DOCK by choosing "DOCK" on the
menu items. (See page 28.)
Air
• When this function is not available, "Can not operate this
function now" will display.
DIGITAL
POWER SAVING
22.1
Allows you to set the Power Saving level in order to
decrease the power consumption and increase the
backlight lifespan.
Audio
Video
CC
:
:
:
:
STEREO
480p (4:3)
1/2 CC1
NONE
Closed Caption
information
Ratings
Press POWER SAVING.
• Each time you press POWER SAVING, the mode changes
as shown below.
• Depending on the number of caption services in the
signal being received, you will see information such as
1/2 or 1/4 displayed.
Off
Standard
Advanced
1/2 means “the first of two services”.
Example:
If a program has three services (Digital CC(ENG), CC1
and Text1), the closed caption display will toggle in this
sequence:
• You can have the same settings by choosing "Power
Saving" on the menu items. (See page 27.)
Closed Captions and Digital Closed Captions
1/3 ENG
2/3 CC1
3/3 Text1
Off
Your TV is equipped with an internal Closed Caption
decoder. It allows you to view conversations, narration
and sound effects as subtitles on your TV. Closed
Captions are available on some TV programs and on
some VHS home video tapes at the discretion of the
program provider.
• The CC button keeps a record of the last service
selected in its memory.
If the last closed caption mode (e.g. 1/3 ENG) you
selected is not available for the next program, or on
another channel, the closed caption service that is
available is automatically selected, and this service
appears in parentheses, e.g. “1/3(CC1)”.
Digital Closed Caption service is a new caption service
available only on digital TV programs (also at the
discretion of the service provider). It is a more flexible
system than the original Closed Caption system,
because it allows for a variety of caption sizes and font
styles. When the Digital Closed Caption service is in
use, it will be indicated by the appearance of a 3-letter
abbreviation that also indicates the language of the
Digital Closed Captions: ENG (English), SPA (Spanish),
FRA (French) or other language codes.
Closed Caption services that appear in parentheses will
not be stored in the CC button's memory as your last
selected service. Only services that you have selected
with the CC button are stored.
Examples:
In a case where there are two closed caption
services provided (for instance, Digital CC(ENG)
and CC1), and Digital CC(ENG) is displayed
as your current selection, if Digital CC(ENG) is
not broadcast for the next program, the other
closed caption service, CC1, will be displayed in
parentheses.
Not all programs and VHS videotapes offer closed
A closed caption service appears in parentheses
because the service you selected is not available
and a different service is displayed on your screen.
“1/1(CC1)” is displayed instead of “1/2/ENG”.
captions. Please look for the “
” symbol to ensure
N
that captions will be shown.
In the Closed Caption system, there can be more than
one caption service provided. Each is identified by its
own number. The “CC1” and “CC2” services display
subtitles of TV programs superimposed over the
program's picture.
• When “Power Saving” is set to “Standard” or “Advanced”,
the Power Saving leaf icon appears on the channel
information window. See page 27 for details of Power
Saving settings.
• See page 29 for detailed closed caption settings.
• When the program contains no closed caption, “--”
displays in the closed caption information.
In the Closed Caption system, the “Text1” or “Text2”
services display text that is unrelated to the program
being viewed (e.g., weather or news). These services
are also superimposed over the program currently
being viewed.
• If the language code, e.g. “ENG”, is not found on Digital TV
programs, “--” will be shown.
• Four kinds of closed caption service (CC1, CC2, Text1,
Text2) are potentially available, but a broadcast may
contain none or only some of these services at the
discretion of the program provider.
• When the Sidebar Widget, TV+Web or Web is displayed,
Closed Captions are not available.
• You can have the same settings by choosing "Change CC"
on the menu items. (See page 28.)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct Button Operation
VIEW MODE
You can select the screen size.
Press VIEW MODE.
• The View Mode menu displays.
1
• The menu lists the View Mode options selectable for the type of video signal currently
being received.
Press VIEW MODE or
/
while the View Mode menu is displayed to select a
a b
2
desired item on the menu.
• You can sequentially select a View Mode that has its own aspect ratio.
For 4:3 programs
■
Example: Screen size images
Side Bar
S.Stretch (Smart stretch)
Zoom
Stretch
Suitable for viewing
conventional 4:3 programs in programs to fill the screen.
their normal format.
Suitable for stretching 4:3
Suitable for viewing wide-
screen 2.35:1 anamorphic
DVDs in full screen.
This mode is useful for 1.78:1
DVDs. When viewing 1.85:1
DVDs, stretch mode will still show
very thin black bands at the top
and bottom of the screen.
For HD programs
■
Stretch: Suitable for viewing wide-screen 1.78:1 aspect ratio program, stretch mode will still show very thin black bands at
the top and bottom of the screen.
Dot by Dot (1080i/p only): Detects the resolution of the signal and displays an image with the same number of pixels on
the screen.
Full Screen (720p only): You can select "Full Screen" only when receiving a 720p signal.
S.Stretch (Smart stretch): Suitable for stretching 4:3 programs to fill the screen.
Zoom: Suitable for viewing wide-screen 2.35:1 aspect-ratio programs in full screen.
•
•
When using Dot by Dot or Full Screen, it is possible to see noise or bars around different outer portions of the screen. Please
change view mode to correct this.
You can have the same settings by choosing "View Mode" on the menu items. (See page 28.)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
On-Screen Display Menu Operation
LCFONT embedded
Example
Example
ENTER
RETURN
MENU
: Select
: Enter
: Back
: Exit
Picture Settings
ENTER
RETURN
MENU
: Exit
: Select
: Enter
: Back
Picture Settings
Guide display
1
2
• This indicates the buttons that can be operated on the
displayed screen. The guide display varies depending
on the menu setting screen.
Press MENU to display the MENU screen.
1
2
•
The operations for some selected items may be displayed
in the operational guide bar at the bottom of the screen.
Press
Press
/
to select the desired menu.
to select a specific adjustment item,
1
2
c d
/
a b
Item displayed in blue
and then press ENTER.
• This indicates the item currently selected.
•
Press ENTER to go to the adjustment screen for this item.
• Additional related adjustment items may be
displayed. Press
to select the desired item.
/
a b
Item in brackets
3
4
5
• This indicates the current setting for the item.
Adjust the item while referring to the guide
display.
• Operations vary depending on the function or item.
Refer to the guide display corresponding to the
menu setting screen for button operations.
3
Item displayed in white
• This indicates that the item can be selected.
Item displayed in gray
• This indicates that the item cannot be selected.
There are various reasons why the items cannot be
selected, but the main reasons are as follows:
—Nothing is connected to the selected input terminal.
Press MENU to exit.
3
—
The function is not compatible with the current input signal.
• Menu options differ in the selected input modes, but the operating procedures are the same.
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly
from the actual screens.
LCFONT:
• This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-
to-read characters on LCD screens.
Menu Operation Buttons
Using the touch sensor panel of the main unit
You can also operate the menu with the touch sensor
panel of the main unit.
Using the remote control
Use the following buttons on the remote control to
operate the menu.
Button operations on the touch sensor panel correspond
to the ones on the remote control as shown below.
MENU:
Press to open or close the menu screen.
/
/
/
:
Press to select a desired item on the screen or
adjust a selected item.
Press to go to the next step or complete the
setting.
a b c d
VOL
/
/
: Cursor
: Cursor
/
on the remote control.
on the remote control.
l k
c d
CH
/
s r
a b
ENTER:
INPUT: ENTER on the remote control.
MENU: MENU on the remote control.
RETURN:
Press to return to the previous step.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Menu Items
• When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu may be
changed.
• Some menu items may not be displayed depending on the selected input source.
Picture Settings
System Options
AV MODE (Changing Pic.Quality)...... Page 24
OPC................................................. Page 24
Backlight .......................................... Page 24
Contrast........................................... Page 24
Brightness........................................ Page 24
Color................................................ Page 24
Tint................................................... Page 24
Sharpness........................................ Page 24
Advanced.................................. Pages 24-25
C.M.S.-Hue........................... Page 24
C.M.S.-Saturation ................. Page 24
C.M.S.-Value......................... Page 24
Color Temp. ......................... Page 25
Motion Enhancement............ Page 25
Active Contrast ..................... Page 25
Gamma Adjustment.............. Page 25
Black Level............................ Page 25
Film Mode............................. Page 25
Digital Noise Reduction......... Page 25
3D-Y/C ................................. Page 25
Monochrome ........................ Page 25
Range of OPC....................... Page 25
Reset................................................ Page 24
View Option...................................... Page 28
View Mode............................ Page 28
Freeze................................... Page 28
Change Audio....................... Page 28
Change CC........................... Page 28
DOCK................................... Page 28
AQUOS LINK Setup ......................... Page 44
Input Terminal Setting.......... Pages 28-29, 48
Audio Setup.......................... Page 28
PC input................................ Page 48
Input Skip.............................. Page 28
Input Label............................ Page 28
HDMI Setup.......................... Page 28
Output Select........................ Page 29
Color System ........................ Page 29
Menu Design.................................... Page 29
Language.............................. Page 29
Channel Selecting Effect ....... Page 29
Program Title Display ............ Page 29
Position................................. Page 29
Caption Setup....................... Page 29
Game Play Time............................... Page 29
Operation Lock Out.......................... Page 29
Icon Light Up Setting........................ Page 30
Demo Mode ..................................... Page 30
Audio Settings
Auto Volume..................................... Page 26
Treble............................................... Page 26
Bass................................................. Page 26
Balance............................................ Page 26
Surround.......................................... Page 26
Bass Enhancer................................. Page 26
Reset................................................ Page 26
Clear Voice....................................... Page 26
Initial Setup
EZ Setup.......................................... Page 30
Language.............................. Page 30
TV Location........................... Page 30
Air/Cable............................... Page 30
CH Search............................ Page 30
Broadcasting Setting........................ Page 31
CH Setup.............................. Page 31
Favorite CH........................... Page 31
Antenna Setup-DIGITAL........ Page 31
Internet Setting................................. Page 51
Individual Setting ....................... Pages 31-33
Secret No. ............................ Page 31
Parental CTRL................ Pages 32-33
Wall Mount Audio Setup................... Page 31
Reset................................................ Page 31
Power Control
Audio Only........................................ Page 27
Power Saving................................... Page 27
No Signal Off.................................... Page 27
No Operation Off.............................. Page 27
Information
Identification..................................... Page 34
Digital Caption Info. ......................... Page 34
Software Update ....................... Pages 34-36
Manual Update .............. Pages 34-36
Auto Update Setting.............. Page 34
Netflix Help....................................... Page 58
23
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
AV MODE (Changing Pic.Quality)
Picture Settings
The audio and video settings can be changed to suit
the program or input content being watched.
Select from the following AV modes.
Adjusts the picture to your preference with the
following picture settings.
Example
When the input source is TV, INPUT 1 or 2
terminals:
■
■
AUTO/STANDARD/MOVIE/GAME/USER/DYNAMIC/
DYNAMIC(Fixed)
Picture Settings
When the input source is INPUT 3, 4, 5, 6 or 7
terminals:
AUTO/STANDARD/MOVIE/GAME/PC/USER/x.v.Color/
DYNAMIC/DYNAMIC(Fixed)
• The selectable items vary depending on the input source.
• You can select AV MODE by pressing AV MODE on the
remote control unit. See page 19 for details of AV MODE
settings.
OPC Setting
Automatically adjusts the brightness of the screen.
Off: The brightness is fixed at the value set in "Backlight".
On: Automatically adjusts.
On: Display: Displays the OPC effect on the screen while
adjusting the brightness of the screen.
Press MENU to display the MENU screen, and then
1
2
• When set to "On", the Optical Picture Control (OPC)
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure nothing obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
• When set to "On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness.
press
/
to select "Picture Settings".
c d
Press
/
to select a specific adjustment item.
a b
• Select "Advanced" and then press ENTER to set
"C.M.S.-Hue", "C.M.S.-Saturation", "C.M.S.-Value",
"Color Temp.", "Motion Enhancement", "Active
Contrast", "Gamma Adjustment", "Black Level",
"Film Mode", "Digital Noise Reduction", "3D-Y/C",
"Monochrome" or "Range of OPC".
Press
/
(or
/
) to select the desired setting,
a b c d
3
4
and then press ENTER.
Press MENU to exit.
OPC:
Selected item
button
button
d
c
Backlight
The screen dims
The screen
brightens
OPC:
Contrast
Brightness
For less contrast
For less
brightness
For less color
intensity
Skin tones
become reddish
For less
For more contrast
For more
brightness
For more color
intensity
Skin tones
become greenish
For more
sharpness
Advanced Picture Settings
This TV provides various advanced functions for
optimizing the picture quality.
Color
Tint
C.M.S.
Sharpness
(Color Management System)
sharpness
Color tone is managed using the six-color adjustment
setting.
• For resetting all Picture adjustment items to the factory
preset values, press to select "Reset", press ENTER,
/
a b
C.M.S.-Hue: This is a standard to adjust the color either
more reddish or more bluish in tone.
press
/
to select "Yes", and then press ENTER.
a b
C.M.S.-Saturation: Increases or decreases the
saturation of a selected color.
C.M.S.-Value: A higher value makes the image brighter.
A lower value makes the image darker.
•
For resetting all adjustment items to the factory preset
values, press to select "Reset", and then press
/
a b
ENTER
.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Color Temp.
Digital Noise Reduction
(Color Temperature)
Produces a clearer video image.
Auto: Automatically adjusts the level of noise reduction.
High/Middle/Low: Select a desired level for viewing a
clearer video image.
For a better white balance, use color temperature correction.
High:
White with bluish tone
Mid-High:
Middle:
Mid-Low:
Low:
Off: No adjustment.
White with reddish tone
• "Digital Noise Reduction" is not available during PC format
input.
• When AV MODE is set to "GAME", "Auto" is not available.
White balance can be adjusted between a maximum of
+30 and a minimum of –30 for each color temperature.
R Gain (LO/HI): –30 through +30
3D-Y/C
G Gain (LO/HI): –30 through +30
B Gain (LO/HI): –30 through +30
Provides high quality images with minimal dot crawl
and cross color noise.
Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images.
•
For resetting all adjustment items to the factory preset
values, press to select "Reset", and then press
/
a b
ENTER
.
Motion Enhancement
• "3D-Y/C" is available for input signal from Composite Video
and analog broadcasts (air and cable).
Use Motion Enhancement to view fast-action video
more clearly.
Monochrome
120Hz High/120Hz Low: For obtaining a clearer image.
Off: Normal image.
For viewing a video in monochrome.
On: For viewing in monochrome.
Off: Normal color.
• "Motion Enhancement" may cause image noise. If this
occurs, turn the function "Off".
• When AV MODE is set to "GAME" or PC format is being
input, "Motion Enhancement" is not available.
Range of OPC
The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to
a maximum of +16 and a minimum of –16.
Max.: –15 through +16
Active Contrast
Automatically adjusts the image contrast according to
the scene.
Min.: –16 through +15
On: Automatically adjusts the image contrast.
Off: No adjustment.
• The "Range of OPC" settings are active only when "OPC"
is set to "On".
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.
Gamma Adjustment
Adjusts the differences of picture tones between bright
parts and dark parts. The adjustment range of the
gamma can be set to a maximum of +2 and a minimum
of –2 by pressing or
.
d
c
Black Level
Adjusts on-screen black level to your preferred level.
High: The black level gets brighter.
Low: The black level gets darker.
• "Black Level" is available for input signal from Composite
Video, Component 480i and analog broadcasts (air and
cable).
Film Mode (3:2 pull-down)
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still film frame for high-definition picture quality.
Advanced(High)/Advanced(Low): Select a desired level
to remove jerkiness from film contents.
Standard: Detects, analyzes, converts film source.
Off: Normal viewing mode.
• "Film Mode" does not function when you set AV MODE to
"GAME".
• "Standard" does not function when channel display shows
an input signal resolution of 480p, 720p, or 1080p.
• "Film Mode" is not available during PC format input.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Auto Volume
Audio Settings
Different sound sources sometimes do not have the
same loudness level, such as a program and its
commercial breaks. The Automatic Volume Control
(Auto Volume) reduces this problem by equalizing
levels.
You can adjust the sound quality to your preference
with the following settings.
Example
High: Reducing the loudness gaps among different
sound sources strongly.
Middle:
Low: Reducing the loudness gaps among different
sound sources slightly.
Surround
The surround function produces Surround effect from
the speakers.
On: Makes it possible to enjoy natural, realistic surround
sound.
Off: Outputs the normal sound.
• You can choose Surround by pressing SURROUND on
the remote control unit. (See page 18.)
• Audio Settings menu is grayed out when "Output Select" is
set to "Variable". (See page 29.)
• For some discs, setup may be required on your DVD
player. In this case, please refer to the operation manual of
your DVD player.
Press MENU to display the MENU screen, and then
1
2
press
Press
/
to select "Audio Settings".
c d
/
to select a specific adjustment item.
a b
• Select "Auto Volume", "Surround", "Bass Enhancer" or
Bass Enhancer
"Clear Voice", and then press ENTER to set each item.
This function allows you to enjoy bass-enhanced sound.
Press
/
(or
/
) to select the desired setting,
a b
c d
3
4
On: Bass Enhancer function is on.
and then press ENTER.
Off: Normal sound.
Press MENU to exit.
Selected item
Treble
Bass
button
For weaker treble
For weaker bass
button
d
For stronger treble
For stronger bass
c
• Audio Settings menu is grayed out when "Output Select" is
set to "Variable". (See page 29.)
Clear Voice
This function emphasizes speech against background
noise for greater clarity.
Balance
Decrease audio
from the right
speaker
Decrease audio
from the left
speaker
• Audio menu is grayed out when "Output Select" is set to
"Variable". (See page 29.)
• For resetting Audio adjustment items, except "Clear Voice",
to the factory preset values, press
/
to select "Reset",
a b
press ENTER, press
/
to select "Yes", and then press
a b
ENTER.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Power Saving
Power Control
This function allows you to set the Power Saving level
Power control setting allows you to save energy.
in order to decrease the power consumption and
increase the backlight lifespan.
Example
Standard: Optimizes power reduction based upon video
content. When set to "Standard", " " appears on the
screen.
Advanced: Optimizes power reduction based upon video
content and engages OPC. When set to "Advanced",
"
" appears on the screen.
Off: This function does not work.
• "Power Saving" does not function when you set AV MODE
to "AUTO" or "DYNAMIC (Fixed)".
• You cannot select a different Power Saving item for each
AV MODE.
When "Power Saving" is set, the "OPC" settings for all AV
Modes will automatically change.
—If you set "OPC" to "On" when "Power Saving" is set
to "Standard", then the "Power Saving" setting will
change to "Advanced".
—When you change the "Power Saving" setting from
"Advanced" to "Off" or to "Standard", "OPC" will be set
to "Off".
—"AUTO" and "DYNAMIC (Fixed)" will remain set to "Off".
• When "Power Saving" is set to "Standard" or "Advanced",
the Power Saving leaf icon appears to the left of "OPC" in
the Picture Settings menu screen.
• You can select Power Saving by pressing POWER
SAVING on the remote control unit. (See page 20.)
No Signal Off
When set to "Enable", the power will automatically shut
down if there is no signal for 15 minutes.
• When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
• "Disable" is the factory preset value.
Press MENU to display the MENU screen, and then
1
2
3
4
press
Press
/
to select "Power Control".
c d
•
When a TV program finishes, this function may not operate.
/
to select a specific adjustment item,
a b
No Operation Off
When set to "Enable", the power will automatically shut
down if there is no operation for 3 hours.
and then press ENTER.
Press
/
(or
/
) to select the desired setting,
a b
c d
and then press ENTER.
Press MENU to exit.
• Skip this step for "Audio Only".
• When it is 5 minutes before the power shuts down, the
remaining time will start to keep appearing every minute.
• "Disable" is the factory preset value.
Audio Only
When listening to music from a music program, you
can turn the screen off and enjoy audio only.
Video On: Audio is output without screen image.
Video Off: Both screen images and audio are output.
• The screen image will return to normal when a button
(except those for audio adjustment, such as VOL, MUTE,
SURROUND, AUDIO) is pressed.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Change CC
System Options
Allows you to change the Closed Caption display.
Select "Change CC" on the menu to display the Closed
Caption information.
• The information displayed varies depending on the program
you are watching.
Example
System
Options
• You can change Closed Caption by pressing CC on the
remote control unit. See page 20 for details of Closed
Caption function.
DOCK
The DOCK can be displayed by selecting "DOCK" on
the MENU screen.
• You can display the DOCK by pressing DOCK on the
remote control unit. (See page 20.)
Input Terminal Setting
Audio Setup
Press MENU to display the MENU screen, and then
1
2
3
4
press
Press
/
to select "System Options".
c d
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
PCM: The optical output terminal outputs audio signal
in PCM form. If your digital audio system does not
support Dolby Digital, select "PCM".
/
to select a specific adjustment item and
a b
then press ENTER.
Press
/
(or
/
) to select the desired setting,
a b
c d
and then press ENTER.
Press MENU to exit.
View Option
These functions are useful for adjusting the audio
and video settings. The View Option functions can be
operated with the remote control unit.
Dolby Digital: The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces sound from
surround program of digital.
View Mode
Input Skip
This setting allows you to skip the HDMI or PC-IN Input
("Input 3 (PC)", "Input 4 (HDMI)", "Input 5 (HDMI)",
"Input 6 (HDMI)" and "Input 7 (HDMI)") on the Input
Selection operation.
This function changes the screen size.
Select "View Option" on the menu to display the View
Mode menu screen.
The View Mode menu varies depending on the input
source.
Yes: Skips the input.
No: Does not skip input.
Input Label
• You can select View Mode by pressing VIEW MODE on
the remote control unit.
—See page 21 for adjusting the video being input from a
TV or other audiovisual equipment.
Lets you set the input terminal displayed when using
the CH List or channel display. Press
select the new name for the input mode.
• Using the software keyboard, you can enter up to
10 characters for text. (See page 52.)
/
/
/
to
a b c d
—
—
See page 47 for adjusting the video being input from a PC.
See page 59 for adjusting the video being input from Netflix.
Freeze
• You cannot change labels if the input source is TV.
Allows you to capture and freeze a moving image that
you are watching.
• Select "Freeze" again on the menu and press ENTER to
return to the normal image.
HDMI Setup
To watch an HDMI or PC-IN equipment image, select
"INPUT4", "INPUT5", "INPUT6" or "INPUT7" from the
CH List using INPUT on the remote control unit or on
the TV.
• You can select Freeze by pressing FREEZE on the remote
control unit. See page 18 for details of Freeze function.
Auto View:
Enable: To use View Mode based on signal
recognition, including an HDMI signal.
Disable: No function.
Change Audio
Allows you to change the audio when multiple audio is
available for the program you are watching.
• Refer to your external equipment operation manual for the
signal type.
• When connecting a DVI-HDMI conversion adapter/cable to
the HDMI terminal, the image may not come in clearly.
• You can change Audio by pressing AUDIO on the remote
control unit. See page 19 for details of Audio function.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Output Select
Caption Setup
Allows you to select what controls the audio output.
This function allows you to adjust the closed caption
screen appearance to suit your preference. You can
adjust 7 items: "Caption Size", "Font Style", "Foreground
Color", "Foreground Opacity", "Background Color",
"Background Opacity" and "Character Edge".
Fixed: Sound via speaker is adjusted with VOL
/
on
k l
the remote control unit or VOL
/
on the TV.
l k
Sound via the AUDIO OUT terminal is not adjustable
and outputs at a consistent level.
Variable: Sound via the AUDIO OUT terminal is adjusted
Example:
with VOL
/
on the remote control unit or VOL
/
k l
l k
Selectable items available for "Font Style".
Default: The font specified by broadcasting station or
default font.
on the TV.
Sound via speaker is muted.
Type 0: Proportional font used in the MENU screen.
Type 1: Monospaced with serifs.
Type 2: Proportionally spaced with serifs.
Type 3: Monospaced without serifs.
Type 4: Proportionally spaced without serifs.
Type 5: Casual font type.
Color System
Select the video signal system compatible with your
equipment from the list below:
Auto/NTSC/PAL-M/PAL-N
Type 6: Cursive font type.
Type 7: Small capitals.
• "Color System" can only be set for the INPUT 2.
• If you have already set the Secret No., input the 4-digit
secret number here. See page 31 for setting a secret
number.
• For resetting adjustments to the factory preset values,
press
/
to select "Reset", and then press ENTER.
a b
• The default value depends on the broadcasting station.
Menu Design
Language
Game Play Time
This function displays the elapsed game time so you
do not lose track of the time. To display the elapsed
time, select "GAME" for the AV MODE before starting
the game.
You can also select a language from the System
Options menu. Select from among 3 languages:
English, French and Spanish.
On: The elapsed time is displayed every 30 minutes when
you switch to GAME mode in external input mode.
Off: No adjustment.
Channel Selecting Effect
You can select whether to use transition effects when
changing channels.
Operation Lock Out
This function locks the operation buttons on the TV
and the remote control.
Yes: A transition effect is used when the channel is
changed.
Off: No adjustment.
No: No function.
RC Control Lock: All buttons on the remote control are
locked.
Program Title Display
Button Control Lock: All buttons on the TV, except
POWER, are locked.
Select the CH display when changing channels for
digital broadcasting.
Yes: "Program Info." displays.
No: "Program Info." does not display.
When “RC Control Lock” or “Button Control Lock” is
selected, a confirmation screen appears.
On: Locks the operation buttons.
Off: No adjustment.
Position
For adjusting a picture's horizontal and vertical
position.
• To unlock the buttons on the remote control by using the
touch sensor panel of the main unit (see page 22):
H-Pos.: Centers the image by moving it to the left or
right.
Press MENU to display the MENU screen, and then
1
V-Pos.: Centers the image by moving it up or down.
press VOL
/
to select "System Options".
to select "Operation Lock Out", and
l k
s r
Press CH
/
2
then press INPUT.
• For resetting adjustments to the factory preset values,
s r
Press CH
/
to select "Off", and then press INPUT.
3
4
press
/
to select "Reset", and then press ENTER.
a b
Press MENU to exit.
• When connecting a PC to the HDMI terminal, the image
position will be automatically adjusted. It cannot be
manually adjusted.
• To unlock the buttons on the TV, press MENU on the
remote control, and then select "Off" in "Operation Lock
Out".
• The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position-setting screen.
•
Adjustments are stored separately according to input source.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Icon Light Up Setting
When this function is set to "On", the LED on the front
of the TV turns on.
Initial Setup
Example
Initial
Setup
• "On" is the factory preset value. If you want to turn off the
LED, set the function to "Off".
Demo Mode
You can select the image from several types of demo
mode.
4 Color LCD/AQUOS Net/Feature Demo/Auto Play
If you select "Auto Play", you need to set playback type.
Continuous: Play Demos continuously.
10 min.: Play Demos every 10 minutes.
20 min.: Play Demos every 20 minutes.
[No]
Press MENU to display the MENU screen, and then
1
2
• This function will be canceled when you press EXIT on the
remote control unit.
• When "Demo Mode" is set to "4 Color LCD", "AQUOS Net"
or "Feature Demo", pressing FREEZE pauses/restarts
demo.
• "Demo Mode" may not be selected depending on input
signal type.
• "Demo Mode" may be automatically canceled depending
on input signal type.
press
Press
/
to select "Initial Setup".
c d
/
to select a specific adjustment item,
a b
and then press ENTER.
• When you select "EZ Setup", "CH Setup", "Parental
CTRL" or "Reset", you can enter the 4-digit secret
number here. See page 31 for setting a secret number.
Press
/
(or
/
) to select the desired setting,
a b
c d
3
4
and then press ENTER.
Press MENU to exit.
EZ Setup
You can run EZ Setup again, even after setting up the
preset channels.
Language: Select from among 3 languages (English,
French and Spanish).
TV Location: Select "Home" or "Store" for the location
where you plan to install the TV. This product qualifies
for ENERGY STAR in Home mode default setting.
Home: “Power Saving” is set to "Advanced", and AV MODE is
set to "STANDARD".
Store: “Power Saving” is set to "Off" and AV MODE is set to
"DYNAMIC (Fixed)". Picture Reset and Feature Demo can be
set.
Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"
regardless of whether Picture Reset is "On" or "Off". If you
select "On", AV MODE will be reset to "DYNAMIC (Fixed)"
if there is no operation for 30 minutes. When "Off" is
selected, AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When “On” is selected, after all the settings
are completed, the Feature Demo screen is displayed if
there is no operation for several minutes.
• ENERGY STAR qualification is based on AV MODE
"STANDARD".
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
• See Initial Installation on page 17 for setting each item.
• If no channel is found, confirm the type of connection
made with your TV and try "EZ Setup" again.
• If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Broadcasting Setting
CH Setup
Wall Mount Audio Setup
This selects the optimal audio for the program you are
currently watching even when the TV is mounted to a
wall.
If Initial Installation does not memorize all the channels
in your region, follow the instructions below to manually
memorize the channels.
Yes: Selects the optimal audio.
No: No adjustment.
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for
all channels viewable in the set area.
Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
• If you have already set the Secret No., input the 4-digit
secret number here.
CH Memory: You can select the channels to skip in each
ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable).
On: Skips channels. (Channel selection disabled using CH
/
.)
r s
Off: Does not skip channels. (Channel selection enabled using
CH .)
• The Channel Setup settings will not be changed.
• The Language settings will not be changed.
• The Secret number settings will not be changed.
• The TV Location settings will not be changed.
/
r s
Remove Scrambled CH: This function makes the TV
look for and then delete digital cable channels that
are scrambled and so unavailable in the set area. The
process may take more than 20 minutes.
Yes: Starts to remove scrambled channels.
Individual Setting
Secret No.
No: This function does not work.
Allows you to use a secret number to protect certain
settings from being accidentally changed.
• See Initial Installation on page 17 for setting each item.
• If no channel is found, confirm the type of connection
made with your TV and try channel search again.
• If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
IMPORTANT:
Three conditions must be met to enable the V-Chip (see
pages 32 to 33):
Favorite CH (Favorite Channel Setting)
1. Secret No. is registered.
This function allows you to program 4 favorite
channels, in 4 different categories. By setting the
favorite channels in advance, you can select your
favorite channels easily.
2. V-Chip/V-Chip (DTV Only) settings have been made.
• The “V-Chip (DTV Only)” will only be selectable when a new
rating system can be downloaded via digital broadcasting in the
U.S.
To register your favorite channel:
3.
"Status
"
is set to
"On".
Select "Register" and then press ENTER. Press
d
/
/
/
a b c
to select the position in the category, and then press
Setting the Secret No.
You can set and change the secret number by using
0-9.
■
ENTER to register.
To delete your favorite channel:
Yes: Changes or sets the Secret No.
No: The confirmation screen to clear the Secret No.
appears when the Secret No. has been set. When the
Secret No. has not been set, the previous screen will
be displayed.
Select "1 Data Clear" and then press ENTER. Press
/
/
/
to select the channel you want to delete, and
a b c d
then press ENTER. Select "Yes" and then press ENTER.
To delete all the favorite channels, select "All Data Clear".
Secret No. Clear
■
• Before setting the channel, select the channel you want to
register as a favorite channel.
You can clear your secret number.
Yes: Your secret number is cleared.
No: Your secret number is not cleared.
• You can display the Favorite CH screen by pressing
"
"
FAVORITE CH on the remote control.
Antenna Setup-DIGITAL
• As a precautionary measure, make a note of your secret
number and keep it in a familiar place.
• If the secret number is cleared, the Status setting
automatically sets to "Off". "V-Chip" and "Status" will not
be selectable from the menu.
In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confirm the
antenna configuration through the "Antenna Setup-
DIGITAL" screen. If necessary, adjust the direction of
the antenna to obtain the maximum signal strength.
Signal Strength: The signal strength of DIGITAL channel
is displayed. The signal information is based on the
current channel.
Channel Strength: Input the 2-digit channel number
to check the signal strength of the selected channel.
Make sure the signal is strong enough for each
channel.
• This function is available for DIGITAL (Air) only.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Parental CTRL
(Parental Control Setting)
TV Parental Guidelines
Example
■
MPAA
Status
TV Guidelines
TV-Y
Can. English Ratings
Can. French Ratings
TV-Y7
TV-G
D
L
Used to enable or disable the parental control function.
This function will not be selectable from the menu if
you do not first configure your secret number.
On: Enables Parental CTRL.
TV-PG
TV-14
TV-MA
NONE
S
V
FV
Off: Disables Parental CTRL.
V-Chip
Press
/
to adjust the item to your desired position.
a b
V-CHIP is an electronic filtering device built into your
TV. This tool gives parents a great degree of control
over broadcasts accessed by their children. It allows
parents to select programs judged suitable for child
viewing while blocking ones judged not suitable. It
does so automatically once you activate the V-CHIP
feature in your TV. "V-Chip" and "Status" will not be
selectable from the menu if you do not first configure
your secret number.
" " indicates the item is blocked. Press MENU to exit.
Suggested age
TV-Y: All children.
TV-Y7: Directed to older children.
TV-G: General audience.
TV-PG: Parental Guidance suggested.
TV-14: Parents strongly cautioned.
TV-MA: Mature audience only.
• The U.S. has two rating systems for viewing content: TV
Parental Guidelines and movie ratings.
• The TV Parental Guidelines work in conjunction with the
V-CHIP to help parents screen out inappropriate television
shows from their children.
• Movie ratings are used for original movies rated by the
Motion Picture Association of America (MPAA) as watched
on cable TV and not edited for television. The V-CHIP can
also be set to block MPAA-rated movies.
Example
MPAA
TV Guidelines
TV-Y
Can. English Ratings
Can. French Ratings
TV-Y7
TV-G
D
L
TV-PG
TV-14
TV-MA
NONE
S
V
FV
• The setting automatically enters "Block" for any ratings
below your selection.
• If Status is not set to "On", the configuration settings will
not work.
When setting an individual content-based rating item:
Press
or ENTER to access blocked content
d
1
2
3
items from the currently selected age-based rating
item.
MPAA (Voluntary movie rating system)
Example
■
Press
/
to select an individual item, and then
a b
MPAA
press ENTER to unblock it (" " is removed). Repeat
TV Guidelines
G
the same steps for the other items.
Can. English Ratings
Can. French Ratings
PG
PG-13
R
Press
or RETURN to register after all individual
c
content rating items are set.
NC-17
X
Content
FV: Fantasy violence.
V: Violence.
NONE
S: Sexual situation.
L: Adult language.
D: Sexually suggestive dialog.
Press
/
to adjust the item to your desired position.
a b
" " indicates the item is blocked. Press MENU to exit.
G: General audiences. All ages admitted.
PG: Parental guidance suggested. Some material may not be
suitable for children.
PG-13: Parents strongly cautioned. Some material may be
inappropriate for children under 13.
R: Restricted. Under 17 requires accompanying parent or
adult guardian (age varies in some jurisdictions).
NC-17: No one 17 and under admitted.
Content
S
Rating
FV
V
L
D
TV-Y
TV-Y7
TV-G
Suggested
X: X is an older rating that is unified with NC-17 but may be
encoded in the data of older movies.
age
TV-PG
TV-14
• Voluntary movie rating system only uses an age-based
rating.
TV-MA
: The content rating can be set, but this rating is not
normally broadcast by TV stations.
: Content rating can be set.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Canadian Rating Systems (Canadian English ratings
and Canadian French ratings)
• The TV rating systems in Canada are based on the
Canadian Radio-Television and Telecommunications
Commission (CRTC) policy on violence in television
programming.
• While violence is the most important content element to
be rated, the structure developed takes into consideration
other program content like language, nudity, sexuality and
mature themes.
Canadian French Ratings
Example
■
MPAA
E
TV Guidelines
G
Can. English Ratings
Can. French Ratings
8ans+
13ans+
16ans+
18ans+
NONE
• When setting the V-CHIP on the Canadian system you
can choose either the Canadian English ratings or the
Canadian French ratings.
Press
/
to adjust the item to your desired position.
" " indicates the item is blocked. Press MENU to exit.
a b
Canadian English Ratings
Example
■
E: Exempt programming.
G: General: All ages and children, contains minimal direct
violence, but may be integrated into the plot in a humorous
or unrealistic manner.
8ans+: General but inadvisable for young children: May
be viewed by a wide public audience, but could contain
scenes disturbing to children under 8 who cannot
distinguish between imaginary and real situations.
Recommended for viewing with parent.
13ans+: Over 13 years: Could contain scenes of frequent
violent scenes and therefore recommended for viewing with
parent.
16ans+: Over 16 years: Could contain frequent violent scenes
and intense violence.
MPAA
E
TV Guidelines
C
Can. English Ratings
Can. French Ratings
C8+
G
PG
14+
18+
NONE
Press
/
to adjust the item to your desired position.
a b
" " indicates the item is blocked. Press MENU to exit.
18ans+: Over 18 years: Only for adult viewing. Could contain
frequent violent scenes and extreme violence.
E: Exempt: Includes news, sports, documentaries and other
information programming; talk shows, music videos, and
variety programming.
C: Children: Intended for younger children under the age of 8
years. Pays careful attention to themes that could threaten
their sense of security and well-being.
C8+: Children over 8 years old: Contains no portrayal
of violence as the preferred, acceptable, or only way
to resolve conflict; nor encourage children to imitate
dangerous acts which they may see on the screen.
G: General: Considered acceptable for all age groups.
Appropriate viewing for the entire family, contains very little
violence, physical, verbal or emotional.
How to temporarily release the V-CHIP BLOCK
■
When the V-CHIP BLOCK is working and censors a
broadcast, "V-CHIP HAS BEEN ACTIVATED." displays.
Press ENTER while the V-CHIP is working, and
1
2
then the secret number setting menu displays.
Input the 4-digit secret number by using 0–9. At this
time V-CHIP BLOCK temporarily releases.
PG: Parental Guidance: Intended for a general audience, but
may not be suitable for younger children (under the age of 8)
because it could contain controversial themes or issues.
14+: Over 14 years: Could contain themes where violence
is one of the dominant elements of the storyline, but it
must be integral to the development of plot or character.
Language usage could be profane and nudity present
within the context of the theme.
18+: Adults: Intended for viewers 18 years and older and
might contain depictions of violence, which while related to
the development of plot, character or themes, are intended
for adult viewing. Could contain graphic language and
portrayals of sex and nudity.
Reactivating the temporarily released V-CHIP
BLOCK
■
You can reactivate the temporarily released V-CHIP
BLOCK as shown below.
• Select "Status" setting from the Parental CTRL menu to
reactivate BLOCK. (See page 32.)
• Select "V-Chip" setting ("MPAA", "TV Guidelines", "Can.
English Ratings" or "Can. French Ratings") from the
Parental CTRL to reactivate BLOCK. (See pages 32 to 33.)
• Switch off the TV power.
• Performing any of the three above will activate the V-CHIP
BLOCK.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Input the 4-digit secret number by using 0-9.
3
Information
Software Update
Example
Enter your Secret No.
Information
Press
/
to select “Manual Update” or “Auto
a b
4
Update Setting”, and then press ENTER.
• The operations thereafter vary depending on the setting.
nformation
Press MENU to display the MENU screen, and then
1
2
3
4
press
Press
/
to select "Information".
c d
/
to select a specific adjustment item,
a b
and then press ENTER.
Press
/
(or
/
) to select the desired setting,
a b
c d
Manual Update
and then press ENTER.
Press MENU to exit.
Select the method for manually updating the software.
Network Update: Downloads the update file via the
network and then updates the software. (See page 35.)
USB memory: Updates the software using a USB memory
device containing the update file. (See pages 35 to 36.)
Identification
The current version of the TV software is displayed.
Digital Caption Info.
(Digital Caption Information)
• A broadband connection and Internet Setting are required
to update the software using the network. (See page 51.)
• It may take time to access and download the update
depending on the Internet connection and other factors.
This function allows viewing of digital closed caption
information for the digital broadcast program being viewed.
• This list is not displayed for analog broadcasts or external
input audio/video.
Auto Update Setting
• This information is not included in CC1, CC2, Text1, or
Text2, and is not displayed in a list.
When the TV is on or Netflix is used, this function
enables the TV to connect to the network and check
for updates automatically.
Software Update
This is used to upgrade the system software to
enhance the TV functions.
Yes: Enables Auto Update Setting.
No: Disables Auto Update Setting.
When an update is available, a message is displayed.
c d
to select "Yes", and then press ENTER to
Press
/
display the download screen. (See page 35.)
Software update file is available online.
Proceed to Network Update menu?
Yes
No
Press MENU to display MENU screen, and then
1
2
• This function does not work when a broadband connection
or Internet Setting is not available.
press
Press
/
to select “Information”.
c d
/
to select “Software Update”, and then
a b
press ENTER.
• If you have already set the Secret No., go to step 3.
Example
nformation
34
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Updating the Software via the Network
■
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
4
Press
/
on the Manual Update screen to select
c d
1
"Network Update", and then press ENTER.
Press ENTER.
•
The TV connects to the network and checks for updates.
The TV restarts, and it takes a while until the system
update is completed. Do not unplug the AC cord.
• To cancel, press ENTER.
Connecting to Internet..
Checking latest version of
Firmware..
Press "OK" to restart the TV
and complete the update.
Wait several minutes and do not
unplug the AC cord.
Accessing..
Abort
OK
• If the software was not updated successfully, check the
broadband connection and Internet Setting, and then
try updating the software again.
The current version of the TV and the latest version
of firmware are displayed. To update the TV
software, select “Yes”, and then press ENTER.
2
Failed to complete update.
Please retry from Software
Update menu.
Latest version of firmware has
been found.
Firmware update is available.
Proceed with update?
OK
Current Version
XXXXXXXX
Latest Version
XXXXXXXX
Updating the Software with a USB Memory Device
■
To check for the availability of a software update, visit
have any questions, please
Estimated Update Time
XX
Select "Yes" to start update.
call 1-800-BE-SHARP (800-237-4277).
Yes
No
CAUTION
• When a server connection cannot be established or an
update is not available, a message is displayed.
If a server connection cannot be established, check the
broadband connection and Internet Setting.
• Do not remove the USB memory device or unplug
the AC cord while the software is being updated.
• Be sure to properly follow the whole procedure
described below, step by step. Otherwise, for
example, the TV cannot read the data in the USB
memory device and software updating will fail.
Cannot reach the server.
Check the network settings
and try again.
Insert the USB memory device with the update file
into the USB 1 or USB 2 terminal on the TV.
1
OK
• When you update the software, use only one USB
terminal. Either USB 1 or USB 2 is usable.
There is no newer software
than the present version.
OK
After the update file is downloaded, the software
update process begins.
3
Downloading latest firmware..
Version
:
XXXXXXXX
30%
Abort
Press
/
on the Manual Update screen to select
c d
2
Updating to latest firmware..
"USB Memory", and then press ENTER.
Version
:
XXXXXXXX
50%
Remote Control operation is
disabled during Update process.
Do not unplug AC cord.
CAUTION
• Do not unplug the AC cord while the software is
being updated.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display Menu
Press ENTER to start checking the data in the USB
memory device.
Press ENTER to start updating.
3
5
Press "OK" to restart the TV
and complete the update.
Wait several minutes and do not
unplug the AC cord.
Insert the USB memory device
containing the software update file.
OK
OK
During the data checking, “Checking” blinks.
4
Example
Now checking the data
in the USB memory device.
Now updating
50%
Checking
Do not unplug AC cord.
• The current version of the TV software and the version
of the update file on the USB memory device are
displayed. To update the TV software with the update
file, select “Yes”, and then press ENTER.
CAUTION
• Do not remove the USB memory device or unplug
the AC cord while the software is being updated.
Example
When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
6
Software update file is detected
in the USB memory device.
Start update?
After this screen is displayed, the TV automatically
turns off and then turns on again.
Current Version
XXXXXXXX
Latest Version
XXXXXXXX
Example
Yes
No
Software update is complete.
• If the USB memory device is not properly installed or
the correct update file cannot be found on the USB
memory device, an error message is displayed.
Check the file on the USB memory device, and then
reinsert the USB memory device correctly.
Update Version
UXXXXXX2
• If the update has failed, check the file in the USB
memory device and try Software Update again.
Software update file is not detected
in the USB memory device.
Confirm that you have transferred
the file to the USB memory device
and retry software update.
Failed to complete update.
Retry Software Update.
If system update fails again,
contact the customer service center.
OK
After the screen shown below is displayed, press
7
8
ENTER.
There is more than one software
file in the USB memory device.
Confirm that only the
software update file is
in the USB memory device.
System software was
successfully updated.
Remove the USB memory device.
OK
OK
Remove the USB memory device.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying Photo and Music Playback
You can enjoy viewing photos and listening to music from external USB memory devices.
• Depending on the USB memory device, the TV may not be able to recognize the recorded data.
• Use only alphanumeric characters for naming files.
• File names over 80 characters (may vary depending on character set) may not be displayed.
• Do not remove a USB memory device or memory card from the TV while transferring files, using the slide show function, or
switching screens, or before you exit "USB" from the CH List.
• Do not insert and remove a USB memory device to and from the TV repeatedly.
• When using a card reader, be sure to insert Memory first before using the card reader.
• USB input cannot be selected when displaying the browser (including the Sidebar Widget). Close the browser first.
c d
Press
/
to select the desired folder, and then
4
Viewing Photos and Listening to
Music
press ENTER.
• You do not need to select the drive in step 3 when there is
only one drive in the connected USB device.
• Up to 16 drives can be displayed.
Insert the USB memory device with recorded
photos or music into the USB 1 or USB 2 terminal
on the TV.
1
• The USB Media screen is displayed.
• If USB memory devices are inserted into both
terminals, the USB 1 terminal has priority.
• The display varies depending on the type of data
recorded in the USB memory device.
Displaying the USB Media Screen
The USB Media screen can be displayed even by using
the menu screen.
CAUTION
• Do not use a USB extension cable when connecting
a USB memory device to the USB terminal on the TV.
• Using a USB extension cable may prevent the TV
from performing correctly.
When displaying the data with the CH List
screen
Press INPUT to display the CH List screen.
■
Example
1
2
a
"
"
Press /b or press INPUT again to select USB .
• The display varies depending on the type of data
recorded in the USB memory device.
Music
• You cannot enter this mode when a USB memory device is
not inserted into the TV.
• "VIEW MODE" is fixed during this mode.
• "USER (USB)" is the default value for AV MODE setting.
Each time you press AV MODE, the mode changes
between "USER (USB)", "DYNAMIC (Fixed)", "DYNAMIC"
and "STANDARD".
Photo
c d
Press
/
to select "Photo" or "Music", and then
2
3
press ENTER.
a
c d
Press /b/
/
to select the drive where you
When displaying the data with the DOCK
■
1
2
want to find your files, and then press ENTER.
• You can display the USB MENU screen by pressing D.
• If the TV is turned off and then on again, the number
assigned to the USB drive may change.
Press DOCK to display the DOCK.
c d
to select "USB Media", and then press
Press
ENTER.
/
Example
Drive1
Drive5
Drive2
Drive6
Drive3
Drive4
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying Photo and Music Playback
Slide Show
Photo Mode
The photos displayed on the thumbnail selection
screen are displayed as a slide show.
Viewing Thumbnails
Example
Buttons
RETURN
C (blue)
Description
Return to the thumbnail selection screen.
Reveal/hide the Guide Display.
Display the USB MENU screen.
...
picture 1
picture 2
picture 3
picture 4
picture 5 ...
D (yellow)
• The selected BGM is played repeatedly.
• The slide show continues until you press RETURN.
• For setting the slide show speed, select "Select Slide Show
Interval" on the USB MENU screen.
USB Menu
Example
USB MENU
Select Slide Show Intrerval
Select Slide Show BGM
Set All Slide Show Image
Reset All Slide Show Image
[10sec]
Select Slide Show Interval
Specify the length of time before the next image
appears.
Buttons
ENTER
Description
Display the photo.
/
/
/
Select a desired item.
Return to the previous process.
Select the images to be displayed. Press
this button to add or remove a checkmark.
Display the music list screen.
Start the slide show.
a b c d
RETURN
A (red)
Press D to display the USB MENU screen.
1
2
Press
/
to select "Select Slide Show Interval",
a b
and then press ENTER.
/
"10sec" "30sec" or "60sec",
and
Press a b to select
,
3
B (green)
C (blue)
then press ENTER.
D (yellow)
Display the USB MENU screen.
• When there are invalid photo files, the X mark will be
displayed for the file.
• You can see the file name, shooting date, file size and pixel
size of the selected photo in the lower-left corner of the
screen (shooting date is only available in the EXIF file format).
Viewing Individual Photos
The photo selected on the thumbnail selection screen
is displayed.
Buttons
Description
/
Go to the previous/next photo in the same
directory.
c d
RETURN
A (red)
B (green)
C (blue)
Return to the thumbnail selection screen.
Rotate the photo by 90 degrees to the left.
Rotate the photo by 90 degrees to the right.
Reveal/hide the Guide Display.
• Rotating photos only applies to the temporarily selected
item and this setting is not saved.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying Photo and Music Playback
Set/Reset All Slide Show Image
Set or reset the images to be displayed.
Press D to display the USB MENU screen.
1
2
/
Press a b to select "Set All Slide Show Image"/
"Reset All Slide Show Image", and then press
ENTER.
• When you select "Set All Slide Show Image",
checkmarks are added to all the images.
• When you select "Reset All Slide Show Image", remove
all the checkmarks from all the images.
Example
Select Slide Show BGM
...
picture 1
picture 2
picture 3
picture 4
picture 5 ...
You can select the music to be played in the
background while the slide show is being displayed.
Press D to display the USB MENU screen.
1
2
Press
/
to select "Select Slide Show BGM",
a b
and then press ENTER.
• The list screen is displayed.
• You can display the list screen by pressing B on the
thumbnail selection screen.
Select the music.
3
• Checkmarks are added to the selected music.
Press C to start the slide show.
3
Example
...
music 1
music 2
music 3
music 4
music 5
...
• If no images have been selected, "Cannot display the data"
is displayed and the slide show does not start.
SONG_01.MP3
SONG_02.MP3
SONG_03.MP3
SONG_04.MP3
SONG_05.MP3
SONG_06.MP3
SONG_07.MP3
3:42
4:55
4:35
4:08
4:20
3:55
4:26
SONG_03.MP3
0:14 / 4:35
Buttons
ENTER
c d
Description
Play music.
Select a desired item.
Return to the previous process.
Select the music to be played back. Press
this button to add or remove a checkmark.
a
/
/
/
b
RETURN
A (red)
B (green)
C (blue)
Stop music.
Play/Pause music.
D (yellow)
Display the USB MENU screen.
Press RETURN to display the thumbnail selection
screen, and then press C to start the slide show
and the background music.
4
• All of the music files are selected by default.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying Photo and Music Playback
USB Menu
Music Mode
Example
Example
USB MENU
Set All Auto Play
Reset All Auto Play
...
music 1
music 2
music 3
music 4
music 5
...
SONG_01.MP3
SONG_02.MP3
SONG_03.MP3
SONG_04.MP3
SONG_05.MP3
SONG_06.MP3
SONG_07.MP3
3:42
4:55
4:35
4:08
4:20
3:55
4:26
SONG_03.MP3
0:14 / 4:35
Set/Reset All Auto Play
Set or reset the music to be played back.
Press D to display the USB MENU screen.
1
2
Press
/
to select "Set All Auto Play"/"Reset All
a b
Auto Play", and then press ENTER.
• When you select "Set All Auto Play", checkmarks are
added to all the music files.
• When you select "Reset All Auto Play", remove all the
checkmarks from all the music files.
Press C to play back the music.
3
Buttons
ENTER
Description
• If no music files have been selected, "Cannot playback the
audio file" is displayed and the music is not played back
automatically.
Play music.
Select a desired item.
Return to the previous process.
Select the music to be played back. Press
this button to add or remove a checkmark.
a
c d
/
/
/
b
RETURN
A (red)
USB Memory Device Compatibility
B (green)
C (blue)
D (yellow)
Stop music.
Play/Pause music.
Display the USB MENU screen.
USB memory
device
USB Memory, USB card reader (Mass
Storage class)
File system
FAT/FAT32
Photo file
format
Music file
format
JPEG (.jpg) (DCF2.0 compliant)
• When there are invalid music files, the X mark will be
displayed for the file.
• The displayed play time may differ slightly from the actual
play time depending on the files.
MP3 (.mp3)
Bitrate: 32k, 40k, 48k, 56k, 64k, 80k,
96k, 112k, 128k, 160k, 192k, 224k,
256k, 320kbps
Sampling frequency: 32k, 44.1k, 48kHz
• Progressive format jpeg files are not supported.
• Music files in USB 1.1 devices may not be played properly.
• Operation using USB hubs is not guaranteed.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Viewing Options
Operating the Connected Equipment
Presetting Remote Control Function
You can operate the connected AV products (AV
receiver, cable box, SAT tuner, DTV, VCR, DVD, BD,
LD) using the presetting manufacturer function of your
remote control unit.
To operate the connected equipment, press STB,
DVD∙VCR or AUDIO to select your device. (STB (cable
converter), DVD, BD, VCR or AUDIO.) The remote
control unit button will function as follows.
• When you operate VCR, DVD or BD, press INPUT to select
the terminal connected to your device.
1
• CABLE and SAT cannot be selected at the same time.
1 POWER (SOURCE)
• Turns the connected equipment power on and off.
2
3
4
5
7
2 I
8
• Starts playback. (VCR, DVD, BD)
9
10
3 G
• Rewinds the tape and allows picture search. (VCR)
• Hold down to go in reverse. (DVD, BD)
4 H
• Stops the tape transport. (VCR)
• Playback stops when pressed. With some DVD/Blu-ray
disc players, pressing the button twice may open the disc
tray. (DVD, BD)
6
5 K
• Pressing quickly once takes you to the start of the chapter
currently playing. Each time you press it, you move back
to the start of the previous chapter. (DVD, BD)
6 0–9, • (DOT) (STB)
• Press a button (or buttons) that corresponds to the
channel that you wish to watch.
11
7 J
• Rapidly advances the tape and allows picture search.
(VCR)
12
13
• Hold down to fast forward. (DVD, BD)
8 F
• Sets pauses and still pictures. (VCR, DVD, BD)
9 L
• Pressing quickly once takes you to the start of the next
chapter. Each time you press it, you move ahead to the
start of the next chapter. (DVD, BD)
14
E
10 REC
• Starts recording. (VCR)
Presetting manufacturer codes
11 FLASHBACK
• Press to switch between the current channel and the
channel you were watching immediately before. Some
manufacturers do not preset FLASHBACK. (STB)
•
Press an appropriate button (STB, DVD VCR or
AUDIO) to operate the connected equipment.
1
•
Press an appropriate button (STB, DVD VCR or
2
CH
/
12
r s
AUDIO) and DISPLAY at the same time to enter
r
s
• Press CH or CH
to tune in to a higher or lower
the code registration mode.
channel. (STB)
• Press to select the channel of the TV tuner on the VCR.
(VCR)
Press 0–9 to enter the manufacturer code. (See
3
4
page 42.)
• Preset mode is finished once the LED no longer lights
up.
13 MENU
• When this button is pressed, the DVD/BD menu will
display. (DVD, BD)
After registering the code, the LED will stop blinking
then turn off after one second. (If you perform an
incorrect operation, the LED will blink quickly then
turn off.)
/
/
/
, ENTER
14
•
a b c d
/
/
/
: Press the button to select items on the STB
a b c d
GUIDE screen or STB MENU screen. (STB)
Press the button to select items on the DVD/BD menu
screen. (DVD, BD)
• ENTER: Press to activate the selected function. (STB,
DVD, BD)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Viewing Options
Manufacturer codes
VCR BRAND
REMOTE CONTROL CODE
NUMBER
REMOTE CONTROL CODE
NUMBER
STB BRAND
AUDIO DYNAMICS
BROCKSONIC
CANON
09
ANVISION
CABLE STAR
EAGLE
G.INSTRUMENT
GERROLD
JERROLD
04, 05
13
04, 05
04
05
CRAIG
12
02, 03, 10, 11, 17, 20
17
CURTIS MATHIS
DBX
EMERSON
GE
INSTANT REOLYA
JC PENNEY
JVC
04
09
02, 03, 10, 11, 12, 20,
25-34
04, 05, 08, 12, 15, 16,
18, 19, 22, 23
38
07
14, 21
04, 05, 08, 13, 15, 16,
18, 19, 22, 23
07
04, 05
14, 36*, 37*
01, 09, 24
04, 05, 08, 13, 15, 16,
18, 19, 22, 23
06, 35
10, 13, 14
04
MAGNAVOX
04
04
MOTOROLA
OKA SIGMA
PANASONIC
PHILIPS
09, 16, 17, 22
KENWOOD
MAGNAVOX
MAGNIN
09
04, 05, 06
12
04
MEMOREX
PIONEER
RANDTEK
RCA
S.ATLANTA
VIEWSTAR
MONTGOMERY WARD 02
NEC
09
PANASONIC
PENTAX
PHILCO
PHILIPS
QUASAR
REALISTIC
SAMSUNG
SHARP
04, 18, 19, 20, 21
05
04, 05
04, 05, 06
04
ZENITH
01, 02
11, 12
01, 02, 03
07, 08, 15
04, 05, 06
09
• Numbers marked with * are SAT codes, all others are STB
codes.
SONY
SYLVANIA
TATUNG
TEAC
REMOTE CONTROL CODE
AUDIO BRAND
NUMBER
09
TMK
YAMAHA
10
SHARP
SHARP (SOUND BAR)
01
02
09
REMOTE CONTROL CODE
NUMBER
DVD/BD/LD BRAND
24
DENON
31
JVC
36
KENWOOD
MAGNAVOX
MARANTZ
MITSUBISHI
PANASONIC
PHILIPS
PIONEER
PROSCAN
RCA
SAMSUNG
SHARP
SONY
TOSHIBA
YAMAHA
ZENITH
26
26
28
24, 37
26, 38
30, 33, 35
25
25, 39
29, 34
23, 32, 41, 42
27, 40
26
24
26
• Depending on the brand, the codes of some BD players
may not be supported.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Using AQUOS LINK
Controlling HDMI Equipment Using AQUOS LINK
What’s AQUOS LINK?
• Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate
compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD).
• By connecting AQUOS LINK-compatible devices with HDMI-certified cables to the TV, you can control a
recorder or AV amplifier using the remote control of the TV.
• AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.
Example
Connecting AQUOS
*
HDMI-certified cable
BD Player via AQUOS
LINK-compatible
Audio system
* Use INPUT 4 to connect
ARC-compatible equipment.
HDMI-certified cable
Optical fiber cable
AQUOS LINK-compatible
Audio system
AQUOS BD Player
Back panel vertical inputs
• For connecting the TV to AQUOS LINK-compatible equipment, use commercially available cables.
• Point the remote control toward the TV, not to connected HDMI equipment.
• Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMI-certified cable.
• Up to 3 pieces of HDMI recording equipment and one AV amplifier can be connected using this system.
• These operations affect the HDMI equipment selected as the current input source. If the equipment does not operate, turn on
the equipment and select the appropriate input source using INPUT.
Connected AQUOS LINK-compatible devices can be operated without
changing the settings of the remote control unit.
REC STOP and OPTION buttons will function only when AQUOS LINK is
used.
One Touch Play
■
While the TV is in standby mode, it automatically turns on and plays back the
image from the HDMI source.
■
One Touch Recording
E
Press REC while you are viewing a broadcast received with the AQUOS
LINK-compatible recorder. The AQUOS LINK automatically recognizes the
connected HDMI device and starts recording.
■
Single remote control
The AQUOS LINK automatically recognizes the connected HDMI device and
you can control the TV and the devices as if using a universal remote control.
■
Control the AQUOS LINK-compatible audio system
Set the volume of AQUOS LINK-compatible audio system.
• The above description is an example of the AQUOS LINK function.
• The steps in “AQUOS LINK Setup” on page 44 need to be completed beforehand.
• Refer to this operation manual and the operation manual of the AQUOS LINK device to be used with this TV.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Using AQUOS LINK
Channel Select Key
AQUOS LINK Setup
This function can be set for each input terminal.
Example
On: The remote control unit of the TV can be used to
select the channel, display program information, and
perform other operations of a connected AQUOS
LINK-compatible recorder.
System
Options
Off: This function does not work.
AQUOS LINK Control
Auto Power On
[On]
Audio Return Channel
[Yes]
This function allows you to listen to the TV audio via
audio equipment without using an optical fiber cable,
which conventionally is required.
Selecting Recorder
Channel Select Key
Audio Return Channel
Requirements for using an ARC-compatible AV
amplifier:
[Auto]
• ARC-compatible AV amplifier connected to the ARC-
compatible HDMI terminal (INPUT 4).
(Refer to the operation manual of the ARC-compatible
equipment for details.)
Press MENU to display the MENU screen, and then
1
2
3
4
5
press
Press
/
to select "System Options".
c d
/
to select “AQUOS LINK Setup”, and
a b
• Use of an ARC-compatible cable.
then press ENTER.
Auto: You can listen to the TV audio with ARC-
compatible audio equipment.
Off: This function does not work.
Press
/
to select a specific item, and then press
a b
ENTER.
Press
/
(or
/
) to select the desired setting,
a b
c d
and then press ENTER.
• If the TV audio cannot be output from the AV amplifier even
after making the necessary settings, connect the TV to the
AV amplifier with an optical fiber cable and select “Off”.
Press MENU to exit.
AQUOS LINK Control
Select AQUOS LINK Control to disable AQUOS LINK
function even when an AQUOS LINK-compatible HDMI
device is connected to the TV. This function prevents
the device from starting to operate unexpectedly.
Enable: You can operate AQUOS LINK-compatible
equipment.
Disable: AQUOS LINK function does not work.
Auto Power On
If this is activated, the One Touch Play function is
enabled.
Yes: While the TV is in standby mode, it automatically
turns on and plays back the image from the HDMI
source.
No: This function does not work.
Selecting Recorder
When multiple AQUOS LINK-compatible devices are
connected, this function allows you to set the recorder
E
for recording when you press REC on the TV’s
remote control unit.
Press
/
to select the recorder for recording.
a b
• When an AQUOS LINK-compatible audio system or other
equipment is connected between the TV and recorder,
“Sub” is displayed.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Using AQUOS LINK
Link Operation Menu
Menu
Link
Operation
Link Operation
Recorder Power On/Off
Device Operation panel
Play from Rec. List
One Touch Recording
Show Start Menu
This function allows easy one-touch recording of the
program being viewed on the TV to AQUOS LINK-
compatible equipment with a recording function by
Change Media of Device
Link Booking (Rec. Book)
E
simply pressing REC on the remote control.
Prepare the connected AQUOS LINK-compatible
recorder for recording. Check the following items.
• Make sure that the antenna cable is connected.
• Check that there is sufficient available space on the
recording media (HDD, DVD, etc.).
• On the TV, use “AQUOS LINK Setup” and “Selecting
Recorder” to select the equipment for recording.
• By default, the recorder connected to INPUT 4 is selected
for recording.
Change Audio Output Device
[By AQUOS SP]
Change Surround Mode
Choosing Operating Device
AQUOS LINK Setup
E
Press REC to start recording.
1
• When you are viewing a broadcast received with
the AQUOS LINK-compatible recorder selected in
"Selecting Recorder", recording to the AQUOS recorder
of the broadcast being viewed starts.
• When you are viewing a broadcast received with
equipment other than the AQUOS LINK-compatible
recorder selected in "Selecting Recorder" or other
E
external input equipment, pressing REC on the
remote control does not start recording.
Press REC STOP to stop recording.
2
One Touch Playback
AQUOS LINK allows you to operate the HDMI-
connected equipment with one remote control.
Press
to start playing back a title.
d
• The last played program is played back. You can use the
following buttons during broadcast viewing.
Buttons
Description
Turning On/Off AQUOS LINK-compatible
Equipment
POWER
(SOURCE)
Turns the power of the HDMI connected devices
on and off.
You can manually turn on/off the power of connected
AQUOS LINK-compatible equipment.
Hold down to go in reverse.
Starts playback.
G
I
Press OPTION to display the Link Operation Menu
1
2
3
screen.
Hold down to fast forward.
Playback stops.
J
H
Press
/
to select “Recorder Power On/Off”, and
a b
then press ENTER.
Sets pauses and still pictures.
F
Pressing quickly once takes you to the start of the
chapter currently playing. Each time you press it,
you move back to the start of the previous chapter.
Select “On” (or “Off”) and press ENTER to turn on
(or off) the equipment.
T
U
Pressing quickly once takes you to the start of the
next chapter. Each time you press it, you move
ahead to the start of the next chapter.
T U
do not function with the following
• The buttons
/
Blu-ray disc players currently available.
- BD-HP20U, BD-HP50U
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Using AQUOS LINK
Using the Device Operation Panel
Timer Recording
You can use the device operation panel to control
playback operations.
You can call up the AQUOS LINK-compatible
recorder’s EPG and preset timer recordings using the
TV’s remote control.
Press OPTION to display the Link Operation Menu
1
2
3
screen.
Press OPTION to display the Link Operation Menu
screen.
1
Press
/
to select “Device Operation Panel”, and
a b
then press ENTER.
Press
/
to select “Link Booking (Rec. Book)”,
a b
2
and then press ENTER.
Press to select the desired operation.
/
/
/
a b c d
• The recorder’s EPG is displayed.
Select the program to record.
3
• This function works only when AQUOS LINK-compatible
equipment with the Device Control Panel function is
connected.
• You can use
/
/
/
, ENTER, RETURN, EXIT and
a b c d
the colored buttons.
Playback of Titles Using AQUOS LINK
This section explains how to play back a title in the
AQUOS LINK-compatible equipment.
• This function works only when an AQUOS LINK-compatible
recorder is connected.
• Refer to the operation manual of the recorder for details.
Power on the AQUOS LINK-compatible equipment,
and select appropriate external input.
1
2
3
Listening with the AQUOS AUDIO Speaker System
You can select to listen to the TV sound only from the
AQUOS LINK-compatible audio system and manually
change its sound mode.
Press OPTION to display the Link Operation Menu
screen.
Press
/
to select “Play from Rec. List”, and
a b
Press OPTION to display the Link Operation Menu
1
2
3
then
press ENTER.
screen.
• The title list data from the connected
AQUOS LINK-
Press
/
to select “Change Audio Output
a b
displays.
compatible equipment
Device”, and then press ENTER.
Select the title with
to start playback.
/
/
/
, and then press
a b c d
d
4
Press
/
to select “By AQUOS audio SP”, and
a b
then press ENTER.
• The sound from the TV speaker is muted and only the
sound from the AQUOS LINK-compatible audio system
is audible.
• This function works only when AQUOS LINK-compatible
equipment is connected.
• You can use VOL and MUTE.
/
k l
Displaying the Setup Menu of AQUOS
LINK-Compatible Equipment
Select “By AQUOS SP”, and then press ENTER to
listen to the TV sound.
You can call up a setup menu from the connected
AQUOS LINK-compatible equipment.
Manually Changing AQUOS AUDIO Speaker
System’s Sound Mode
Press OPTION to display the Link Operation Menu
screen.
1
Press OPTION to display the Link Operation Menu
screen.
1
2
/
Press a b to select "Show Start Menu", and then
2
press ENTER.
Press
/
to select “Change Surround Mode”,
a b
• The setup menu of the AQUOS LINK-compatible
equipment is displayed.
and then press ENTER.
• The sound mode changes each time you press ENTER.
• Refer to the operation manual of the AQUOS LINK-
compatible audio system for details.
• Depending on the status of the equipment (recording or in
standby mode, etc), the setup menu will not be displayed.
• The setup menu will not be displayed with the player
BD-HP20U currently available.
HDMI Device Selection
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
Selecting Media Type for AQUOS LINK-
Compatible Recorder
Press OPTION to display the Link Operation Menu
screen.
1
You can switch the media (HDD or DVD) for playback
or recording on the AQUOS LINK-compatible recorder.
Press
/
to select “Choosing Operating Device”,
a b
2
and then press ENTER. The HDMI device toggles
Press OPTION to display the Link Operation Menu
1
2
3
each time you press ENTER.
screen.
Press
/
to select “Change Media of Device”,
Displaying the Link Operation Menu
Press OPTION to display the Link Operation Menu
screen.
a b
and then press ENTER.
1
Select the desired media such as DVD or HDD.
• The Media type toggles each time you press ENTER in
“Change Media of Device”.
Press
/
to select “AQUOS LINK Setup”, and
a b
2
then press ENTER.
• Select the media to be operated by the player.
• The AQUOS LINK Setup menu screen is displayed.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a PC
Displaying a PC Image on the Screen
VIEW MODE
You can select the screen size.
Press VIEW MODE.
• The View Mode menu displays.
1
• The menu lists the View Mode options selectable for the type of video signal currently
being received.
Press VIEW MODE or
/
while the View Mode menu is displayed to select a
a b
2
desired item on the menu.
• You can sequentially select a View Mode that has its own aspect ratio.
• Connect the PC before making adjustments. (See page 16.)
• Selectable screen size may vary with input signal type.
•
You can have the same settings by choosing "View Mode" on the menu items. (See page 28.)
Example: Screen size images
Input signal
Normal
Zoom
Stretch
Dot by Dot
4:3
Keeps the original
aspect ratio in a full
screen display.
For viewing
widescreen
programs. The top
and bottom of the
image is cropped.
An image fully fills the Detects the resolution
screen.
of the signal and
displays an image with
the same number of
pixels on the screen.
Input signal
Stretch
Dot by Dot
16:9
An image fully fills the Detects the resolution
screen.
of the signal and
displays an image with
the same number of
pixels on the screen.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a PC
Setting Audio Input
Audio Select
This function sets the terminal to output the computer
audio.
The adjustment items vary depending on the input
source. Select the input source corresponding to the
terminal connected to the PC and then adjust the
desired item.
Press MENU to display the MENU screen, and then
1
2
3
4
5
press
Press
/
to select "System Options".
c d
INPUT 3
■
/
to select “Input Terminal Setting”, and
a b
Video: Select this when the TV and PC are connected
using an analog RGB cable and the audio is not input.
Video+Audio: Select this when the TV and PC are
connected using an analog RGB cable and the audio is
input via a Ø 3.5 mm stereo minijack.
then press ENTER.
Press
/
to select “PC input”, and then press
to select a specific adjustment item,
a b
ENTER.
Press
/
a b
INPUT 4
■
and then press ENTER to set each item.
Press (or ) to select or adjust the desired
setting, and then press ENTER.
HDMI(Digital): Select this when the TV and PC are
connected using an HDMI-certified cable and audio is
input via the same cable.
/
/
a b
c d
HDMI+Analog: Select this when the TV and PC are
connected using a DVI-HDMI conversion cable and the
audio is input via a Ø 3.5 mm stereo minijack.
Adjusting the PC Image
Auto Sync. (for Analog PC Input Mode Only)
• When "Audio Select" is set to "HDMI(Digital)", sound will
not be produced if you use only an HDMI-certified cable to
connect HDMI-compatible equipment. To produce sound,
you should make an analog audio connection.
• If you want to connect HDMI-compatible equipment
using only an HDMI-certified cable, set "Audio Select" to
"HDMI(Digital)".
For automatically adjusting the PC image.
Yes: Auto Sync. starts and "Now adjusting the image."
displays.
No: This function does not work.
• When "Auto Sync." is successful, "Completed" displays. If
not, "Auto Sync." failed.
• "Auto Sync." may fail even if "Completed" displays.
• "Auto Sync." may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing "Auto Sync.".
• Be sure to connect the PC to the TV and switch it on before
starting "Auto Sync.".
PC Compatibility Chart
It is necessary to set the PC correctly to display XGA
and WXGA signal.
Horizontal Vertical
Frequency Frequency Standard
VESA
Resolution
Fine Sync.
Ordinarily you can easily adjust the picture as necessary
to change image position using "Auto Sync.". In some
cases, however, manual adjustment is needed to
optimize the image.
720 x 400 31.5 kHz
31.5 kHz
640 x 480 37.9 kHz
37.5 kHz
70 Hz
60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
O
O
O
O
O
O
O
O
O
O
O
O
O
O
VGA
H-Pos.: Centers the image by moving it to the left or
right.
35.1 kHz
37.9 kHz
48.1 kHz
V-Pos.: Centers the image by moving it up or down.
Clock: Adjust when the image flickers with vertical
stripes.
Phase: Adjust when characters have low contrast or
when the image flickers.
SVGA
XGA
800 x 600
46.9 kHz
48.4 kHz
56.5 kHz
60.0 kHz
1024 x 768
WXGA
SXGA
1360 x 768 47.7 kHz
1280 x 1024 64.0 kHz
SXGA+ 1400 x 1050 65.3 kHz
• For resetting all "Fine Sync." adjustment items to the factory
preset values, press
ENTER.
/
to select "Reset", and then press
a b
• It is not necessary to adjust the "Clock" or "Phase" when a
digital signal is being input, so it cannot be selected.
• The default cursor position may not be in the center,
because the screen position variable ranges may be
asymmetrical.
• The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position-setting screen.
UXGA
1080p
1600 x 1200 75.0 kHz
1920 x 1080 67.5 kHz
VGA and XGA are registered trademarks of International
Business Machines Corp.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a PC
RS-232C Port Specifications
PC control of the TV
■
Command format
■
■
• Attach an RS-232C cable cross-type (commercially
available) to the supplied Din/D-Sub RS-232C for the
connections.
Eight ASCII codes
CR
e
C1 C2 C3 C4 P1 P2 P3 P4
Command 4-digits
Return code
Parameter 4-digits
• This operation system should be used by a person who is
accustomed to using computers.
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0–9, x, blank, ?
Communication conditions
■
Set the RS-232C communication settings on the PC to
Parameter
match the TV's communication conditions.
Input the parameter values, aligning left, and fill with
blank(s) for the remainder. (Be sure that 4 values are
input for the parameter.)
The TV's communication settings are as follows:
Baud rate:
Data length:
Parity bit:
9,600 bps
8 bits
None
When the input parameter is not within an adjustable
range, “ERR” returns. (Refer to “Response code format”.)
Any numerical value can replace the “x” on the table.
Stop bit:
Flow control:
1 bit
None
When “?” is input for some
commands, the
0
0
a
?
0
3
0
0
9
present setting
value responds.
Communication procedure
■
?
?
?
?
Send the control commands from the PC via the RS-
232C connector.
Response code format
■
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time.
Wait until the PC receives the OK response before
sending the next command.
Normal response
Problem response (communication
error or incorrect command)
O
K
E
R
R
Return code (0DH)
Return code (0DH)
Command table
■
• Commands not indicated here are not guaranteed to operate.
CONTROL CONTENTS
CONTROL ITEM
COMMAND PARAMETER
POWER ON COMMAND SETTING
R
S
P
W
0
1
0
1
x
0
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
Off
On
Power Off
Power On
(Toggle)
The Power On command rejected.
The Power On command accepted.
It shifts to standby.
P
O
W
R
POWER SETTING
Power On
INPUT SELECTION TOGGLE
I
I
T
T
A
V
G
V
D
D
D
D
It input-switches by the toggle. (It is the same as an input change key)
It input-switches to TV. (A channel remains as it is. (Last memory))
It input-switches to INPUT1~INPUT7.
TV
INPUT1-7
AV MODE SELECTION
I
A
V
M
Input terminal number (1–7)
*
0: (Toggle), 1: STANDARD, 2: MOVIE, 3: GAME,
4: USER, 5: DYNAMIC (Fixed), 6: DYNAMIC, 7: PC,
8: x.v. Color, 100: AUTO
Although it can choose now, it is toggle operation in inside.
VOLUME
V
H
V
C
P
O
P
P
L
H
I
L
O
O
C
S
D
M
S
S
K
E
*
*
*
*
*
*
*
*
_
*
_
_
_
_
_
_
Volume (0–60)
H-POSITION
V-POSITION
CLOCK
The screen position variable ranges depend on the View Mode or the
signal type. The ranges can be seen on the position-setting screen.
POSITION
*
*
*
_
*
*
*
_
Only PC mode. (0–180)
Only PC mode. (0–40)
0: (Toggle) [AV], 1: Side Bar [AV], 2: S.Stretch [AV]
3: Zoom [AV], 4: Stretch [AV], 5: Normal [PC]
6: Zoom [PC], 7: Stretch [PC],
PHASE
VIEW MODE
W
E
0: Although it can choose now, it is toggle operation in inside.
1: Only available when 4:3 signal is being input.
5, 6: Only available when 4:3 signal is being input.
8: [PC] Available except when UXGA is being input.
[AV] Only available when 1080i/p is being input.
9: Only available when 720p is being input.
8: Dot by Dot [PC] [AV], 9: Full Screen [AV]
10: Auto [Netflix], 11: Original [Netflix]
MUTE
M
A
U
C
C
F
T
S
H
T
E
U
A
*
*
_
_
_
_
_
_
_
_
_
_
_
_
0: (Toggle), 1: On, 2: Off
0: (Toggle), 1: On, 2: Off
(Toggle)
0: Off, 1: OFF TIMER – 30 MIN., 2: OFF TIMER – 60 MIN.,
3: OFF TIMER – 90 MIN., 4: OFF TIMER – 120 MIN.
SURROUND
AUDIO SELECTION
SLEEP TIMER
A
x
*
O
M
CHANNEL
DIRECT
CHANNEL
(ANALOG)
D
C
C
H
*
*
*
_
The channel number of TV
(1–135)
An input change is included if it is not TV display.
In Air, 2–69ch is effective.
In Cable, 1–135ch is effective.
DIRECT
CHANNEL
(DIGITAL)
D
D
A
C
2
2
P
U
*
*
*
*
*
*
*
_
(0100-9999)
(1-999)
DIGITAL Air (Two-Part numbers, 2-digit plus 2-digit)
DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)
Front half of DIGITAL CABLE CHANNEL NO. (Designate major channel)
DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)
D
C
2
L
*
*
*
_
(0-999)
Rear half of DIGITAL CABLE CHANNEL NO. (Designate minor channel)
D
D
C
C
C
C
C
H
H
L
1
1
U
D
C
0
1
P
W
P
*
*
x
x
x
*
*
_
_
_
*
*
_
_
_
*
*
_
_
_
(0-9999)
(0-6383)
The channel number of TV +1
The channel number of TV
(Toggle)
DIGITAL Cable (One-Part numbers, 5-digit, less than 10,000)
DIGITAL Cable (One-Part numbers, 5-digit, more than 10,000)
If it is not TV display, it will input-switch to TV. (same function as CHU)
If it is not TV display, it will input-switch to TV. (same function as CHV)
Toggle operation of a closed caption.
CH UP
CH DOWN
–1
CC
• If an underbar (_) appears in the parameter column, enter a space.
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
• Any numerical value can replace the “x” on the table.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Internet
• By connecting your TV to a broadband system, you can access the Internet from the TV.
• Display the “Sidebar Widget” on the screen to check out the latest Internet information and access a range of
useful information for AQUOS users from the original home page*.
* About the original home page
• The original home page is a website set up specifically for AQUOS owners.
• The website is worth visiting as it provides a range of useful information, including tips on using your AQUOS
and a frequently asked questions section.
Internet Setup
H
Connecting to the Internet
• To connect your TV to the Internet, you must have a broadband Internet connection.
• Use an ETHERNET cable (commercially available) to connect the ETHERNET terminal on the TV to your
broadband router (commercially available).
• If you do not have a broadband Internet connection, consult the store where you purchased your TV or ask your
Internet service provider or telephone company.
Internet
ETHERNET cable
(commercially available)
H
Checking your Internet connection
•
Press AQUOS NET twice or three times to switch to the TV+Web or Web screen.
When the original home page appears, now you are connected to the Internet.
• If you have failed to connect to the Internet in the above operation, then an
error message will appear. In this case, press EXIT to return to the normal TV
screen and check the relevant settings (see page 51).
• If you still cannot connect to the Internet, please consult your Internet service
provider or telephone company.
H
Information on the PLC adapter
The SHARP PLC adapter kit (sold separately) lets you
use the existing electrical wiring in your house to create
1
*
a home network.
Simply plug the adapters into electrical outlets at the
desired locations, and then connect your computer
and other devices to the adapters with LAN cables (two
LAN cables are provided).
Internet
If you have Broadband Internet service, connect your
router to one of the adapters to allow all your network
devices to access the Internet.
Data can be exchanged at speeds of up to 85 Mbps
on your network.
2
*
*1: PLC does not have router function. To connect
to the Internet via network, Broadband Internet
connection and related devices such as router etc
is required.
*2: The actual communication speed may be affected
by power line conditions, other electrical appliances
and network conditions.
Up to four devices can be connected to the HN-VA400U
adapter.
Model number
HN-VA401SU
HN-VA400U
Number of ports
+
4 1
4
1
HN-VA100U
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Internet
Displaying Updated Information and
Support Service
This function can be used to display up-to-date
information on the Sidebar Widget via the Internet and
allow you to receive support service over the network.
Sidebar Widget
Press AQUOS NET repeatedly to display the
1
H
If you cannot connect to the Internet
Sidebar Widget.
Perform the procedures below to check your TV's
network settings.
• Each time you press AQUOS NET, the screen image
toggles as shown below:
Sidebar Widget
TV+Web
Web
TV
Ethernet Setup
• When you are not connected to the Internet, a network
function explanation screen is displayed.
The services displayed vary depending on
circumstances.
Press EXIT to display the normal TV screen.
1
2
Press MENU to display the MENU screen, and then
press
/
to select “Initial Setup”.
c d
Press
/
to select a title, and then press
Press
/
to select “Internet Setting”, and then
a b
a b
3
4
2
3
ENTER.
press ENTER.
• The web page for the selected title is displayed.
• The service details vary depending on circumstances.
Press
then press ENTER.
/
to select “Communication Setup”, and
a b
Press EXIT to return to the normal TV screen.
Press
press ENTER.
/
to select “Ethernet Setup”, and then
a b
5
• Check that numbers are displayed for each setting.
• If there are any settings without numbers, specify the
numbers by following the on-screen instructions.
• For information on how to enter text, see page 52.
• If you start up the Sidebar Widget while a Closed Caption
is displayed, the Closed Caption is automatically hidden.
• Web page appearances may differ depending on the type
of screen (TV+Web or Web).
• When a still image is displayed, the Sidebar Widget does
not appear even if you press AQUOS NET.
Press MENU to exit.
6
Setting the Zip Code
• When displaying TV+Web with a channel in which the
V-Chip is enabled, the cursor keys on the remote control
unit do not function.
Repeat steps 1 to 4 in Ethernet Setup.
1
2
Press
/
to select “Zip Code”, and then press
a b
ENTER. After “Change” is highlighted, press
ENTER again.
AQUOS Advantage Live
Press
/
to select “US/Mexico” or “Canada”,
c d
3
4
Press DOCK to display the DOCK.
1
2
and then press ENTER.
Press
/
to select “AQUOS ADVANTAGE LIVE”,
c d
Enter your zip code.
and then press ENTER.
• The U.S. and Mexico use 5-digit zip codes. Canada
uses 6-digit codes.
• For the U.S. and Mexico, use 0-9 on the remote
control unit to enter your zip code. For Canada, use
the software keyboard.
Press to select the desired service.
/
/
/
a b c d
3
My Account: Register your AQUOS LCD today and
receive a free 3 month warranty extension! Use
this service to complete registration, view user and
warranty information.
After “Complete” is highlighted, press ENTER.
Press MENU to exit.
5
6
Live Support: Connect to Sharp service center over
the internet to receive remote assistance for AQUOS.
Sharp advisors will remotely connect to AQUOS
and can provide variety of services such as setup,
performance diagnostic, etc. You must agree to the
terms and conditions when using Live Support.
Mail Center: Stay connected with SHARP news and more!
Learn More: Learn more about the many benefits of
AQUOS Advantage membership available to you.
New Software: Stay up to date with the latest AQUOS
LCD TV software.
Interactive Service
If you do not want other people to connect to the
Internet in your absence, you can make settings to
keep the TV away from the Internet.
Press MENU to display the MENU screen, and then
1
2
3
press
/
to select “Initial Setup”.
c d
Press
/
to select “Internet Setting”, and then
a b
press ENTER.
Press
/
to select “Interactive Service”, and then
a b
User Guide: In depth AQUOS operating instructions for
your AQUOS LCD TV.
press ENTER.
• Input the 4-digit secret number by using 0–9.
Press
/
to select “No”, and then press ENTER.
c d
4
5
Press EXIT to return to the normal TV screen.
4
• If you want to allow Internet connection, select “Yes”,
and then press
.
ENTER
• The display may change as a result of a software update.
Press MENU to exit.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Internet
Caps Off/Caps On/Caps Lock
Entering Text (Software Keyboard)
If “alphabet” is selected in “Character Set”, this switches
characters between uppercase and lowercase.
Each time you press ENTER, the character type switches as
shown below:
When you are editing an input screen or specifying the
Ethernet settings used for accessing the Internet, enter
text from the software keyboard.
Caps Off: all the characters are lowercased
Caps On: only the first character is uppercased
Caps Lock: all the characters are uppercased
• You can enter up to 128 characters for text.
Done
The text you enter is displayed as you type it in.
To move the cursor (the current input position), use
Applies the entered information and closes the software
keyboard.
“
” or “
” on the software keyboard.
Quit
Press
/
to select the type of characters entered:
c d
Closes the software keyboard without applying the entered
information.
alphabet, number or sign.
(The selectable types depend on the input source.)
• You can also close the software keyboard by pressing
EXIT on the remote control unit.
Displays the icon “
inserted.
”, indicating that a new line has been
Clear
Erases the character string.
• When the cursor is somewhere in a line: the character
string to the right of the cursor will be erased.
• When the cursor is at the right end of a line: the entire line
will be erased.
Delete
If the cursor is at the right end of a line, this erases text one
character at a time.
• You can also delete text by pressing RETURN on the
remote control unit.
Enters a space.
While you are entering text, likely input conversion candidates
are displayed based on what you typed in.
• You can also enter text by pressing A, B or C on the remote
control unit.
Buttons
Description
Moves the focus up. When the focus is at the top edge, this moves the focus to
the opposite edge (bottom edge).
Moves the focus down. When the focus is at the bottom edge, this moves the
focus to the opposite edge (top edge).
a
b
Moves the focus left. When the focus is at the left edge, this moves the focus to
the opposite edge (right edge).
When the focus is on “Character Set”, this selects the character type (moving
backwards).
When the focus is in an input box, this moves the cursor in the input box to the left.
Moves the focus right. When the focus is at the right edge, this moves the focus to
the opposite edge (left edge).
c
d
When the focus is on “Character Set”, this selects the character type (moving
forwards).
When the focus is in an input box, this moves the cursor in the input box to the
right.
ENTER
EXIT
Performs the processing for the button currently in the focus.
Closes the software keyboard without applying the original input elements for the
entered text.
Erases the text in the input box where the cursor is currently located.
When the cursor is at the end of a sentence, this acts as a backspace.
Directly enters the single-byte number for that button.
Directly enters prediction candidate 1.
RETURN
0-9
A (red)
B (green)
C (blue)
D (yellow)
Directly enters prediction candidate 2.
Directly enters prediction candidate 3.
Enters a space.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Internet
Using the Browser
About links
• Web pages on the Internet often include “links” that
allow you to jump to other web pages (or sites).
• “Links” can take various forms, including words
or images, but they always work in the same way
letting you jump to the link destination when you
select them.
• Selected items (such as links of text input fields) are
enclosed in a yellow frame.
• You can jump from a “link” to the corresponding link
destination.
ENTER,
/
/
/
a b c d
• Press
to select a link that you want to jump,
/
/
/
a b c d
and then press ENTER.
EXIT
• Press the button to return to the TV screen.
CAUTION
• If the power is cut due to a power failure or the TV being
unplugged while you are using the Internet, information
such as bookmarks or cookies may not be saved correctly.
RETURN
• Press the button to return to the previous page.
Example : The image shown below, which is only for
explanation, is subject to change.
When a security notification window is displayed:
• Press
to close the window.
ENTER
AQUOS Network
AQUOS Center
What’s New
• This window appears when you visit a web page that has
security protection, or when you move from a protected
page to an unprotected page.
• In “Security Settings” you can set whether or not this
window is displayed. (See page 56.)
Featured Content
Photo Player
Entertaainment
AQUOSG
allery
Sports
When a cookie confirmation window appears:
Choose whether or not to accept the cookie (see page 56),
and then press
.
ENTER
• In “Cookies” settings you can set whether or not this
window is displayed. You can also opt to delete all the
cookies at once. (See page 56.)
Today
Monday
Tuesday
Wednesday
To users who access the Internet from a PC
• When you access the Internet from this TV, the
procedures may not be the same as regular
browser-based access on a PC.
GEMINI
AQUARIUS
ARIES
PISCES
• You cannot download files.
• You cannot view a history of the pages you have
visited.
Page
1
Add Widgets
of
3
Legal
Click this but ton to go to AQUOS Network.
• You cannot change the startup page displayed
when you press AQUOS NET.
AQUOS Console
:Scroll
D
:Tool
• Pop-up windows appear in separate tabs.
• On some pages, video and audio cannot be
played, and text or images may not be displayed
correctly.
Pages with security protection are
clearly shown as such.
Tab
If content on a page is continued on another page,
directions to that page are shown clearly.
You can use
/
/
/
to go to the continuation of a
a b c d
page.
• Where there is link text or a link image in the
direction pressed, the text or image is selected first.
If this happens, press the same direction button
several times.
When “ ” is displayed in a page:
z
• The page failed to load successfully, or it contains images
with formats that cannot be displayed on the TV. Try
reloading the page by selecting “
toolbar.
” (see page 54) in the
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Internet
Using the Toolbar
Using Tabs
You can use the toolbar to control the browser and to
specify settings.
You can use tabs to view up to 3 web pages at the
same time. Each page appears in a separate tab, and
you can switch between the tabs.
Press B on the remote control unit to display the
1
Tab menu.
• You can also display the Tab menu by clicking “
the toolbar.
” in
Selected item
Select This
Description
Displays the web page in the
selected tab.
Close This Tab
Closes the selected tab.
• You can also press C on the
remote control unit to close a
tab.
Press D on the remote control unit to display the
1
2
Close Other Tabs Closes the other (unselected) tabs.
toolbar.
Create New Tab Creates a new tab.
• You can also press A on the
remote control unit to create a
tab.
Press
/
to select a function, and then press
c d
ENTER.
Selected item
Description
Displays the linked page in a new tab.
Press
Press
/
to select a tab.
to select the item you want to use, and
c d
2
3
/
a b
Displays the Tab menu.
then press ENTER.
Returns to the previous page.
Goes back to the original page when you
have viewed the previous page.
Refreshes the page.
Interrupts a page while it is loading.
Displays the original home page.
Select this to open a bookmark.
Adds the current page to your bookmarks.
Displays the Browser menu.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Internet
Saving the URL of the Current Page
Editing Bookmarks
Adding a web page to your bookmarks allows you to
return to that page later by simply selecting it from your
list of bookmarks.
You can rearrange or delete the bookmarks.
Switching between the URL and title name
■
1
2
Press D on the remote control unit to display the
toolbar.
“
”
Press
/
to select
in the toolbar, and then
c d
press ENTER.
• Your bookmarks list is displayed.
Press
/
to select the title you want to edit from
a b
3
4
the bookmarks list, and then press A on the remote
control unit.
• The Bookmarks menu appears.
Select “Display by Address” or “Display by Title” in
the Bookmarks menu, and then press ENTER.
Display the page that you want to bookmark.
1
2
Rearranging displayed items
■
1
2
Press D on the remote control unit to display the
toolbar.
Press D on the remote control unit to display the
toolbar.
“
”
Press
/
to select
in the toolbar, and then
c d
3
4
press ENTER.
“
”
Press
/
to select
in the toolbar, and then
c d
press ENTER.
Select “Yes”, and then press ENTER.
• The page is added to your bookmarks.
• Your bookmarks list is displayed.
Press
/
to select the title you want to display
a b
3
4
Opening a Bookmarked Page
in a different position from the bookmarks list, and
then press A on the remote control unit.
• The Bookmarks menu appears.
Press D on the remote control unit to display the
toolbar.
1
“
”
Press
/
to select
in the toolbar, and then
Press
/
to select “Move Up” or “Move Down”,
c d
a b
2
press ENTER.
and then press ENTER.
• Your bookmarks list is displayed.
Press
/
/
/
to select the page you want to
a b c d
3
Deleting bookmarks
■
1
2
access, and then press ENTER.
• The selected page is displayed.
• If you have bookmarked 11 or more web pages, press
Press D on the remote control unit to display the
toolbar.
/
to scroll through your bookmarks list.
c d
“
”
Press
/
to select
in the toolbar, and then
c d
press ENTER.
When opening a bookmark in a new tab:
• Your bookmarks list is displayed.
Press A instead of ENTER.
• The Bookmarks menu appears.
1
Press
/
to select the title you want to delete,
a b
3
4
5
and then press A on the remote control unit.
Select “Open in New Tab”, and then press
ENTER.
2
• The Bookmarks menu appears.
Press
/
to select “Delete”, and then press
a b
ENTER.
• To delete all the bookmarks, select “Delete All”.
Press
/
to select “Yes”, and then press
c d
ENTER.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Internet
Browser Settings
You can check or modify your browser settings from
the Browser menu.
Security Settings
Security:
Save Setting: If you select this option, a message is
displayed when you move from a protected page to an
unprotected page.
To change this setting, remove the tick, select “Save
Setting” and then press ENTER.
The Browser menu includes a display settings menu
and a security settings menu.
Root Certificates/CA Certificates: Displays the list of
certificates. To disable a certificate, select the certificate
to be disabled and press A to display the sub-menu.
Select “Disable”, and then press ENTER.
• Disabled certificates are shown unticked in the
certificate list screen.
Cookies:
Accept all: Select this option to accept all cookies.
Reject all: Select this option when you do not want to
accept cookies.
Prompt before accepting: When you open a page
that uses cookies, this option displays a confirmation
message.
Press D to display the toolbar.
1
2
“
”
Press
/
to select
in the toolbar, and then
c d
press ENTER.
Delete All Cookies: Deletes all your cookies.
Server Certificates: Displays certificates for the connected
server.
Press
/
to select the settings menu you want to
to select and confirm the item you want
c d
3
4
5
6
access.
Browser Information: Displays browser information.
Press
to set.
/
a b
Press
/
/
/
to specify the required setting,
a b c d
•
This product contains NetFront Browser of
and then press ENTER.
ACCESS CO., LTD.
Press D to exit.
•
ACCESS, the ACCESS logo and NetFront
are registered trademarks or trademarks of
ACCESS CO., LTD. in the United States,
Japan and/or other countries.
© 2009 ACCESS CO., LTD. All rights
reserved.
View Settings
Zoom In/Out:
Zoom in: Displays content enlarged to 200%.
Normal: Displays content at 100%.
Zoom out: Displays content reduced to 75%.
Encoding: Selects the desired encoding from the list below:
Western (ISO-8859-1)/Unicode (UTF-8)
Page Information: Displays information about the currently
displayed page.
•
This software is based in part on the work of
the Independent JPEG Group.
Reset:
Yes: Resets the browser settings.
No: Does not reset the browser settings.
• “Reset” does not reset the certification enable/disable and
Encoding settings.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Internet
Obtain the Netflix activation code.
H
Instantly Watching Movies from Netflix
4
If you do not have a Netflix account
Press
/
to select "no-start my FREE trial",
1
a b
Please check that the most current software is
loaded on TV by selecting "Auto Update Setting" on
"Software Update" (see page 34) or by visiting
and then press ENTER.
The screen of the TV
to check for a download of the newest software version.
This function allows you to enjoy Netflix through the
Internet.
Netflix is an online DVD and Blu-ray Disc rental service,
offering rental-by mail and streaming instantly to Netflix
members.
• To enjoy this function, make a broadband Internet
connection to both your PC and the TV (see page 50), and
then set Internet Setting (see page 51), then perform the
following operation.
2
3
from your PC.
a b
then press ENTER.
Press
/
to select "I’m now a member", and
• The quality depends on the network speed and original bit
rate.
help or login to your Netflix account and click "Help" at the
top of the page.
The screen of the TV
• Netflix is only available in the U.S.
• Illustrations are examples and may differ from the actual
Netflix screens. The display and operations may change as
a result of a software update.
• Use Netflix without configuring a proxy server. Part or all of
Netflix may not be available when connecting to the Internet
via a proxy server.
• When Netflix is used, “Position” does not work.
Settings for Watching Netflix Content on the TV
H
If you have a Netflix account
Press
/
to select "yes-activate instant streaming
a b
from Netflix", and then press ENTER.
The screen of the TV
Press DOCK to display the DOCK.
1
2
Press
/
to select "NETFLIX", and then press
c d
ENTER.
Read the Disclaimer displayed on the screen. If
3
you agree, press
/
on the last page to select
a b
You will see the following window.
• The activation code is displayed.
The screen of the TV
5
"Agree", and then press ENTER.
(If you do not agree, this service cannot be used.)
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Internet
The title you selected is displayed.
9
and then enter the activation code displayed in step 5.
6
• To return to the step 8, press
.
a
Press
/
to select "play", and then press ENTER
a b
to start playback.
The screen of the PC
or
d
The screen of the TV
• After a period of time, the TV will be activated, and the
empty instant Queue screen will be displayed.
Adding Content to the Instant Queue
To add a movie to the instant Queue of the TV,
select the "Add to Instant" button on Netflix "Watch
Instantly" web page using your PC.
7
• After a period of time, the instant Queue registered
using your PC will appear on the TV screen.
Playing Back Content in the Instant Queue on the TV
Press
/
to select the desired title, and then
c d
8
press ENTER.
• When registration and set-up are completed, you can
jump from the DOCK to the instant Queue screen.
(See steps 1 to 2 in Settings for Watching Netflix
Content on the TV.)
The screen of the TV
• After a period of time, playback of the movie begins.
H
The buttons that can be used during playback
Buttons
Description
Stops playback and displays the movie title screen
(springboard).
θ
a
/
d
F
Sets pauses and still pictures. Press
return to playback.
or
to
F
Displays the TrickPlay screen and fast forwards
playback.
κ
Displays the TrickPlay screen and reverses
playback.
Displays the TrickPlay screen and pauses playback.
Displays the TrickPlay screen, advances one frame
forward, and pauses playback.
τ
ENTER
d
• When there are more than one title in the instant
τ
κ
Queue, press
/
to scroll through several
thumbnails so you can perform a quicker search.
• The parental control settings on the TV (see pages 32
to 33) do not apply to Netflix. To adjust the parental
controls for your instant Queue, go to Netflix.com/
YourAccount.
• The time required to display the instant Queue screen
varies depending on the Internet connection status and
the number of titles in the instant Queue.
Displays the TrickPlay screen, advances one frame
backward, and pauses playback.
Displays Netflix home screen.
Closes the Netflix home screen and switches the
TV to INPUT mode.
c
RETURN
EXIT
Deactivating Netflix Function
Press MENU to display the menu screen.
1
2
Press
/
to select "Information", and then press
to select "Netflix Help", and then press
to select "Deactivate", and then press
c d
ENTER.
Press
/
a b
3
4
ENTER.
Press
/
c d
ENTER.
• To confirm the Netflix status, check the information
displayed on the screen and click "OK".
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Internet
VIEW MODE
You can select the screen size.
Press VIEW MODE.
• The View Mode menu displays.
1
Press VIEW MODE or
/
while the View Mode menu is displayed to select a
a b
2
desired item on the menu.
• You can sequentially select a View Mode that has its own aspect ratio.
You can have the same settings by choosing "View Mode" on the menu items. (See page 28.)
•
Example: Screen size images
Input signal
Auto
Original
Keeps the original
aspect ratio in a full
screen display.
Displays an image by
an original size.
DISCLAIMERS
This Sharp device facilitates the access to content and services provided by third parties. The content and
services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such
third party content and services must be in accordance with any authorization or terms of use provided by
such content or service provider. Sharp shall not be liable to you or any third party for your failure to abide by
such authorization or terms of use. Unless otherwise specifically authorized by the applicable content or service
provider, all third party content and services provided are for personal and non-commercial use; you may not
modify, copy, distribute, transmit, display, perform, reproduce, upload, publish, license, create derivative works
from, transfer or sell in any manner or medium any content or services available via this device.
Sharp is not responsible, nor liable, for customer service-related issues related to the third party content or
services. Any questions, comments or service-related inquiries relating to the third party content or service
should be made directly to the applicable content or service provider.
You may not be able to access content or services from the device for a variety of reasons which may be
unrelated to the device itself, including, but not limited to, power failure, other Internet connection, or failure to
configure your device properly. Sharp, its directors, officers, employees, agents, contractors and affiliates shall
not be liable to you or any third party with respect to such failures or maintenance outages, regardless of cause
or whether or not it could have been avoided.
ALL THIRD PARTY CONTENT OR SERVICES ACCESSIBLE VIA THIS DEVICE IS PROVIDED TO YOU
ON AN “AS-IS” AND “AS AVAILABLE” BASIS AND SHARP AND ITS AFFILIATES MAKE NO WARRANTY
OR REPRESENTATION OF ANY KIND TO YOU, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR A PARTICULAR
PURPOSE OR ANY WARRANTIES OF SUITABILITY, AVAILABILITY, ACCURACY, COMPLETENESS, SECURITY,
TITLE, USEFULNESS, LACK OF NEGLIGENCE OR ERROR-FREE OR UNINTERRUPTED OPERATION OR USE
OF THE CONTENT OR SERVICES PROVIDED TO YOU OR THAT THE CONTENT OR SERVICES WILL MEET
YOUR REQUIREMENTS OR EXPECTATIONS.
SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILITY FOR THE ACTS OR OMISSIONS OF
THIRD PARTY CONTENT OR SERVICE PROVIDERS, NOR ANY ASPECT OF THE CONTENT OR SERVICE
RELATED TO SUCH THIRD PARTY PROVIDERS.
IN NO EVENT WILL SHARP AND/OR ITS AFFILIATES BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY
DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, CONSEQUENTIAL OR OTHER DAMAGES, WHETHER
THE THEORY OF LIABILITY IS BASED ON CONTRACT, TORT, NEGLIGENCE, BREACH OF WARRANTY,
STRICT LIABILITY OR OTHERWISE AND WHETHER OR NOT SHARP AND/OR ITS AFFILIATES HAVE BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Removing the Stand
•
Before detaching (or attaching) the stand, unplug the AC cord.
CAUTION
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
LC-40LE810UN/LC-46LE810UN/LC-52LE810UN
■
Before attaching/detaching the stand
• Before performing work, make sure to turn off the TV.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
1
2
1
2
Loosen the screw used to secure the stand cover
and remove the cover.
Unfasten the four screws used to secure the
stand in place.
Detach the stand from the TV. (Hold the stand so
it will not drop from the edge of the base area.)
1
2
• To attach the stand, perform the above steps in reverse order.
LC-60LE810UN
■
Before attaching/detaching the stand
• Before performing work, make sure to turn off the TV.
1
2
3
2
1
Loosen the screw used to
secure the stand cover.
Remove the cover.
Unfasten the four screws used to
secure the stand in place.
Detach the stand from the TV.
1
2
• To attach the stand, perform the above steps in reverse order.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Setting the TV on the Wall
CAUTION
LC-40LE810UN
• This TV should be mounted on the wall with both the AN-37AG2 (SHARP) wall mount bracket and the AN-37P30
(SHARP) attachment of the wall mount bracket. The TV cannot be mounted when with only the AN-37AG2 wall
mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause
serious injuries.
LC-46LE810UN/LC-52LE810UN/LC-60LE810UN
• This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other
wall mount brackets may result in an unstable installation and may cause serious injuries.
• Installing the TV requires special skill that should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
Using an optional bracket to mount the TV
•
You can ask a qualified service professional about using an optional AN-37AG2 + AN-37P30 or AN-52AG4 bracket
to mount the TV on the wall.
• Carefully read the instructions that come with the bracket before beginning work.
About setting the TV angle
Hanging on the wall
AN-37AG2 + AN-37P30
LC-40LE810UN
AN-37AG2 + AN-37P30 or AN-52AG4 wall
LC-40/46/52LE810UN
0/5/10/15/20°
mount bracket.
•
The center of the display:
(See the bracket instructions for details.)
5
16 inch (7.6 mm) under the “A” position.
/
LC-60LE810UN
0/5/10°
AN-52AG4
LC-46LE810UN
• The center of the display:
33
64 inch (13 mm) under the “b” position.
/
LC-52LE810UN
• The center of the display:
3
64 inch (1 mm) above the “b” position.
/
LC-60LE810UN
Angular mounting
Vertical mounting
•
The center of the display:
43
64 inch (16.7 mm) above the “f” position.
/
•
Refer to the operation manual of
AN-37AG2/AN-37P30 or AN-52AG4 for details.
• Detach the cable clamp on the rear of the TV when using the optional mount bracket.
• Due to the terminal configuration on this TV, when you wall-mount this model, make sure there is enough space between the
wall and the TV for the cables.
• To use this TV mounted on a wall, remove the AC cord holder and the screws at the 4 locations on the rear of the TV, and
then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.
1
2
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Problem
Possible Solution
• No power
• Check if you pressed POWER on the remote control unit. Page 17
• Is the AC cord disconnected? Page 8
• Has the power been turned on? Page 17
• Unit cannot be operated.
• External influences such as lightning, static electricity, may cause improper
operation. In this case, operate the unit after first turning off the power of the TV or
unplugging the AC cord and replugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
• Is the equipment to be operated by the remote control unit set correctly? Press TV
to set the remote control unit to the setting for operating the TV.
• Are batteries inserted with polarity (
,
) aligned? Page 9
e f
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated near the remote control sensor?
• Is "RC Control Lock" selected in "Operation Lock Out"? Page 29
• Picture is cut off/with sidebar
screen.
• Is the image position correct? Page 29
•
Are screen mode adjustments such as picture size made correctly?
Pages 21 and 47
• Strange color, light color, or color • Adjust the picture tone. Pages 24 and 25
misalignment
• Is the room too bright? The picture may look dark in a room that is too bright.
• Power is suddenly turned off.
• Is the sleep timer set? Page 18
• Check the power control settings. Page 27
• The unit's internal temperature has increased. Remove any objects blocking vent or
clean.
• No sound
• Is connection to other components correct? Pages 12 to 16 and 43
• Is the volume too low? Page 18
• Is "Variable" selected in "Output Select"? Page 29
• Have you pressed MUTE on the remote control unit? Page 18
• Check the audio output of the connected external equipment. Is the volume too
low or muted?
• When external equipment is connected via an HDMI cable, you may need to
configure the audio to be output through the HDMI cable.
• When audio is not output from external equipment connected to the INPUT 3 or
INPUT 4 terminal, check the "Audio Select" setting. Page 48
• Even when external equipment is connected using an HDMI-certified cable, an audio
cable connection may be required depending on the type of equipment and the
media being played back. In this case, in addition to connecting an HDMI-certified
cable to the INPUT 4 (HDMI) terminal, connect a Ø 3.5 mm stereo minijack cable to
the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". Page 48
• When connecting a PC via an HDMI-certified cable, check the following:
- Is the audio output of the PC configured correctly? Check the audio output
settings and output audio format in Sound Properties on the PC.
Only PCM format audio can be output. Compressed audio (with a sampling rate
of 32kHz, 44.1kHz, or 48kHz) and DTS format audio cannot be output.
- Depending on the board, only video signals may be output. In this case, in
addition to connecting an HDMI-certified cable to the INPUT 4 (HDMI) terminal,
connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set
"Audio Select" to "HDMI+Analog". Page 48
• If you are using a DVI-HDMI conversion cable to connect external equipment to the
TV, check the following:
- Is an audio cable connected? The DVI-HDMI conversion cable is for video only.
Connect a Ø 3.5 mm stereo mini jack cable to listen to the audio.
- Is INPUT 4 being used? When the TV is connected to another HDMI terminal, the
audio and video are not output together even if a Ø 3.5 mm stereo minijack cable
is connected to the shared AUDIO IN terminal for INPUT 3 and INPUT 4.
-
Check the "Audio Select" setting. Set "Audio Select" to "HDMI+Analog". Page 48
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Problem
Possible Solution
• No picture
• Is connection to other components correct? Pages 12 to 16 and 43
• Is the correct input selected? Pages 12 and 19
• Is "On" selected in "Audio Only"? Page 27
• If the PC image is not displayed, check the following:
- When connecting a laptop PC to the TV, check that display output mode of the
PC is set to external monitor.
- Check the resolution setting on the PC. Is a non-compatible signal being input?
Page 48
• Picture quality of HD programs is
poor.
• To enjoy HD images from external equipment, you are required to set up HDMI
connection or component connection.
• If the program content is not of HD quality, HD images cannot be displayed. Check
that the program you are viewing provides HD images.
• The HD cable/satellite set-top box may need to be configured to output HD images
via cable/satellite.
• The cable/satellite broadcast may not support a signal resolution of 1080p.
• The TV sometimes makes a
cracking sound.
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature. This does not affect the TV's
performance.
• The original home page cannot
be displayed.
• Is the ETHERNET cable connected correctly? Page 50
• Check the settings of "Communication Setup" and "Interactive Service".
Page 51
Page 53
• Some Internet functions used on
a PC are not available from the
TV.
• The TV has only limited functions compared with regular PC browsers.
Troubleshooting - Error Message
The example of an error message
Error code
Possible Solution
displayed on a screen
• Failed to receive broadcast.
E202
• Check the antenna cable. Check that the antenna is correctly
setup.
• No broadcast now.
E203
—
• Check the broadcast time in the program guide.
• An incompatible audio signal has
been received. Change the output
device audio settings to PCM.
• This message is displayed when an audio format other than
PCM is input. (Dolby Digital and DTS audio formats are not
supported.)
- Set the audio output format of connected external HDMI
equipment to PCM.
- Refer to the operation manual of the external equipment for
setting details.
CLEARING THE SECRET NUMBER
If you forget the secret number, clear the secret number using the following procedure.
Select an item from the list below to display the secret number input screen. (For operating the on-screen
1
display menu, see page 22.)
➝
➝
System Options menu).
• "Color system" ( "Input Terminal Setting"
➝
• "EZ Setup" or "Reset" ( Initial Setup menu).
➝
➝
• "CH Setup” ( "Broadcasting Setting"
Initial Setup menu).
Initial Setup menu).
➝
➝
• "Parental CTRL" ( "Individual Setting"
➝
• "Software Update" ( Information menu).
Press and hold both CH
and VOL on the TV simultaneously until the message appears on the screen.
r
k
2
The secret number is
.
• As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
Item
Model: LC-40LE810UN
Model: LC-46LE810UN
46 Class (45 63
Diagonal)
o
Size
LCD
40 Class (40 Diagonal)
/
64o
o
o
panel
Resolution
2,073,600 pixels (1,920
1,080)
g
TV-standard (CCIR)
American TV Standard ATSC/NTSC System
VHF 2-13ch, UHF 14-69ch
VHF/UHF
CATV
1-135ch (non-scrambled channel only)
TV
Function
Receiving
Channel
Digital Terrestrial
Broadcast (8VSB)
2-69ch
Digital cable*1
(64/256 QAM)
1-135ch (non-scrambled channel only)
BTSC System
Audio multiplex
Audio out
10W
2
15W (WF)
e
g
INPUT 2
AV in (AV mini plug and RCA plugs)
ANALOG RGB (PC) in (15-pin mini D-sub female connector),
Audio in (Ø 3.5 mm stereo jack)
INPUT 3
INPUT 4
INPUT 5
INPUT 6
INPUT 7
AUDIO IN
AUDIO OUT
HDMI in with HDCP, Audio in (Ø 3.5 mm stereo jack)
HDMI in with HDCP
HDMI in with HDCP
Back panel
vertical
inputs
HDMI in with HDCP
Audio in (Ø 3.5 mm stereo jack)
Audio out (Ø 3.5 mm stereo jack)
Terminals
DIGITAL AUDIO OUTPUT Optical Digital audio output
1 (PCM/Dolby Digital)
g
ETHERNET
USB 1
Network connector
Photo/Music mode, Software update
Photo/Music mode, Software update
COMPONENT in
USB 2
INPUT 1
ANT/CABLE
RS-232C
Back panel
horizontal
inputs
75 Unbalance, F Type
1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)
q
g
9-pin D-sub male connector
English/French/Spanish
AC 120 V, 60 Hz
OSD language
Power Requirement
Power Consumption
140 W (0.5 W Standby with AC 120 V) 160 W (0.5 W Standby with AC 120 V)
TV + stand
TV only
43.0 lbs./19.5 kg
57.3 lbs./26.0 kg
Weight
35.3 lbs./16.0 kg
45.2 lbs./20.5 kg
Dimension*2
TV + stand
TV only
39 1/
39 1/
27 13
25 59
/
/
10 27
/
32 inch
44 19
44 19
/
/
30 7/
28 7/
13 25
/
64 inch
16 g
16 g
16 g
64 g
64 g
8 g
8 g
1 37
/
64 inch
1 37
/64 inch
(W
H
D)
g
g
64 g
Operating temperature
32°F to 104°F (0°C to 40°C)
e
e
e
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: 4°F to 140°F ( 20°C to 60°C)
f
e
f
e
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Item
Model: LC-52LE810UN
Model: LC-60LE810UN
Size
52 Class (52 1/ Diagonal)
60 Class (60 1/ Diagonal)
o
32o
o
32o
LCD
panel
Resolution
2,073,600 pixels (1,920
1,080)
g
TV-standard (CCIR)
American TV Standard ATSC/NTSC System
VHF 2-13ch, UHF 14-69ch
VHF/UHF
CATV
1-135ch (non-scrambled channel only)
TV
Function
Receiving
Channel
Digital Terrestrial
Broadcast (8VSB)
2-69ch
Digital cable*1
(64/256 QAM)
1-135ch (non-scrambled channel only)
BTSC System
Audio multiplex
Audio out
10W
2 + 15 W (WF)
g
INPUT 2
AV in (AV mini plug and RCA plugs)
ANALOG RGB (PC) in (15-pin mini D-sub female connector),
Audio in (Ø 3.5 mm stereo jack)
INPUT 3
INPUT 4
INPUT 5
INPUT 6
INPUT 7
AUDIO IN
AUDIO OUT
HDMI in with HDCP, Audio in (Ø 3.5 mm stereo jack)
HDMI in with HDCP
HDMI in with HDCP
Back panel
vertical
inputs
HDMI in with HDCP
Audio in (Ø 3.5 mm stereo jack)
Audio out (Ø 3.5 mm stereo jack)
Terminals
DIGITAL AUDIO OUTPUT Optical Digital audio output
1 (PCM/Dolby Digital)
g
ETHERNET
USB 1
Network connector
Photo/Music mode, Software update
Photo/Music mode, Software update
COMPONENT in
USB 2
INPUT 1
ANT/CABLE
RS-232C
Back panel
horizontal
inputs
75 Unbalance, F Type
1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)
q
g
9-pin D-sub male connector
English/French/Spanish
AC 120 V, 60 Hz
OSD language
Power Requirement
Power Consumption
170 W (0.5 W Standby with AC 120 V) 230 W (0.5 W Standby with AC 120 V)
TV + stand
TV only
66.1 lbs./30.0 kg
95.9 lbs./43.5 kg
Weight
54.0 lbs./24.5 kg
71.7 lbs./32.5 kg
Dimension*2
TV + stand
TV only
49 37
49 37
/
/
33 29
31 57
/
/
13 25
/
64 inch
56 5/
56 5/
38 23
35 59
/
14 1/2 inch
1 37
/64 inch
64 g
64 g
32 g
64 g
8 g
8 g
64 g
64 g
1 37
/
64 inch
/
(W
H
D)
g
g
Operating temperature
32°F to 104°F (0°C to 40°C)
e
e
e
*1
*2
Emergency alert messages via Cable are unreceivable.
The dimensional drawings are shown on the inside back cover.
• As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
Part name
Wall mount
bracket
Model number
AN-37AG2 (for LC-40LE810UN)
AN-37P30 (for LC-40LE810UN)
AN-52AG4
(for LC-46LE810UN/LC-52LE810UN/
LC-60LE810UN)
Optional Accessory
The listed optional accessory is available for the Liquid
Crystal Television. Please purchase it at your nearest shop.
• Additional optional accessories may be available in the near
future. When purchasing, please read the newest catalogue for
compatibility and check the availability.
Attachment
Wall mount
bracket
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Information on the Software License for This Product
Software composition
■
The software included in this product is comprised of various software components whose individual copyrights
are held by SHARP or by third parties.
Software developed by SHARP and open source software
■
The copyrights for the software components and various relevant documents included with this product that
were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international
treaties, and other relevant laws. This product also makes use of freely distributed software and software
components whose copyrights are held by third parties. These include software components covered by a GNU
General Public License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other license
agreement.
Obtaining source code
■
Some of the open source software licensors require the distributor to provide the source code with the executable
software components. GPL and LGPL include similar requirements. For information on obtaining the source code
for the open source software and for obtaining the GPL, LGPL, and other license agreement information, visit the
following website:
We are unable to answer any questions about the source code for the open source software. The source code for
the software components whose copyrights are held by SHARP is not distributed.
Acknowledgements
■
The following open source software components are included in this product:
• linux kernel/busybox/glibc/zlib/libpng/libjpeg/libiconv/DirectFB/OpenSSL/XMLRPC-EPI/mtd-utils/Expat/Qt/
U-Boot/WMDRM/AGG(ver2.3)/device-mapper
Software Copyrights
■
XMLRPC-EPI
Copyright 2000 © Epinions, Inc.
libjpeg
This software is copyright © 1991-1998, Thomas G. Lane.
Portions of this software are based in part on the work of the Independent JPEG Group.
OpenSSL
Copyright © 1998-2008 The OpenSSL Project.
This product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit. (http://www.openssl.org)
SSLeay
Copyright © 1995-1998 Eric Young ([email protected])
This product includes cryptographic software written by Eric Young ([email protected]).
Expat
Qt
Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper.
Copyright © 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
Copyright © 2009 Nokia Corporation and/or its subsidiary(-ies).
Contact: Qt Software Information ([email protected])
WMDRM
Content owners use Windows Media digital rights management technology (WMDRM) to protect their
intellectual property, including copyrights. This device uses WMDRM software to access WMDRM-
protected content. If the WMDRM software fails to protect the content, content owners may ask
Microsoft to revoke the software’s ability to use WMDRM to play or copy protected content.
Revocation does not affect unprotected content. When you download licenses for protected content,
you agree that Microsoft may include a revocation list with the licenses. Content owners may require
you to upgrade WMDRM to access to their content. If you decline an upgrade, you will not be able to
access content that requires the upgrade.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling for Service
For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or
customer assistance, please call 1-800-BE-SHARP.
LIMITED WARRANTY
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option,
either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the
purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Product has
been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This
limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely
for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use this Product
for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms of which may
vary. Please contact 1-888-GO-SHARP for further information.
In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof of
purchase to the servicer, which proof must include the date of purchase.
To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or
implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND
IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR
PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE
DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF
PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE.
The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy
available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are
permitted. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all
liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims,
whether based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way
responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence,
lack of reasonable care, alteration, modification, tampering, misuse, improper operation or maintenance or any damages or defects in the
Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp
be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on
warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.
Model Specific Section
Your Product Model Number & Description:
LC-40LE810UN/LC-46LE810UN/LC-52LE810UN/LC-60LE810UN
LCD Color Television
(Be sure to have this information available when you need service for your
Product.)
Warranty Period for this Product:
One (1) year parts and labor from the date of purchase.
Additional Exclusions from
Warranty Coverage (if any):
In order for the Product to be serviced, the Product must be readily available
to the servicer, free and clear of any complex or non-standard installation,
mounting or other encumbrance which would unreasonably interfere with
servicing the Product. The Servicer will remount the Product after service,
provided that such remounting is not into a complex or non-standard installa-
tion. Any additional labor and materials required to remove and/or reinstall a
Product above and beyond the foregoing are not covered by this warranty,
may result in additional charges and are the responsibility of the consumer.
Image Retention resulting from a fixed image being displayed for long
periods of time is not covered by this Limited Warranty (see Operation
Manual on how to prevent this).
Where to Obtain Service:
From a Sharp Authorized Servicer located in the United States. To find the
location of the nearest Sharp Authorized Servicer, please call Sharp toll free
at 1-800-BE-SHARP.
What to do to Obtain Service:
Contact your Sharp Authorized Servicer to obtain in home service for this
product. The Servicer will come to your location and if necessary remove the
unit for repair at the Servicer’s facility and return the set to you once
completed. Be sure to have Proof of Purchase available.
TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES, CALL 1-800-BE-SHARP
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensional Drawings
Unit: inch (mm)
Unité: pouce (mm)
Unidad: pulgada (mm)
LC-40LE810UN
39 1/16 (992)
34 61
/
64 (887.8)
17 47
/
64 (450)
AN-37P30
+
1 37
(40)
/
4 57
/
64
(124)
64
AN-37AG2
11 13
/
16 (300)
3 7/16
(87)
1 37
/
64
(40)
10 27
(275)
/
32
5 (127)
LC-46LE810UN
44 19
/
64 (1125)
40 13
/
64 (1020.8)
21 17
/
64 (540)
1 37
(40)
/
6 15
/
64
(158)
64
AN-52AG4
15 3/4 (400)
2 41
(67)
/
1 37
/
64
(40)
4 7/32
(107)
64
13 25
(340)
/
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensional Drawings
Unit: inch (mm)
Unité: pouce (mm)
Unidad: pulgada (mm)
LC-52LE810UN
49 37
/
64 (1259)
45 15
/
32 (1154.8)
21 17
/
64 (540)
6 15
(158)
/
64
1 37
(40)
/
64
AN-52AG4
15 3
/
4 (400)
2 41
(67)
/
1 37
/
64
(40)
64
13 25
(340)
/
64
4 7
/
32
(107)
LC-60LE810UN
56 5
/
8 (1438)
52 7
/
16 (1331.8)
22 27
/
32 (580)
1 37
(40)
/
6 55
/
64
(174)
64
AN-52AG4
15 3
/
4 (400)
2 41
(67)
/
1 37
/
64
(40)
64
14 1
/
2 (368)
4 7
/
32
(107)
Download from Www.Somanuals.com. All Manuals Search And Download.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
SHARP CORPORATION
Printed in Mexico
Imprimé au Mexique
Impreso en México
TINS-E589WJZZ
10P02-MX-NM
Download from Www.Somanuals.com. All Manuals Search And Download.
|