Thank you for purchasing this SHARP product.
For the best performance, read this manual carefully.
It will guide you in operating your SHARP product.
PORTABLE MINIDISC
RECORDER
MODEL
-
MD MT888H
OPERATION MANUAL
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
Customers without Internet access may telephone
08705 274277 during office hours (or (01) 676 0648
if telephoning from Ireland).
MT888H_UK_F
1
01.8.30, 1:57 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Contents
„ Important Introduction
„ Advanced Features
Page
Page
Special Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Names of Controls and Indicators . . . . . . . . . . . . 7 - 9
Titling a MiniDisc . . . . . . . . . . . . . . . . . . . . . . . . 40 - 42
Editing a Recorded MiniDisc . . . . . . . . . . . . . . 43 - 50
Hold Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Changing Default Settings . . . . . . . . . . . . . . . . 52 - 53
Listening through Another System . . . . . . . . . . . . . 54
„ Preparation
Using with the Rechargeable Battery . . . . . . . . 10 - 11
Using with the AC Adaptor . . . . . . . . . . . . . . . . . . . .12
Using with the Alkaline Battery. . . . . . . . . . . . . . . . .13
Inserting a MiniDisc . . . . . . . . . . . . . . . . . . . . . . . . . .13
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 15
„ References
i
Other Features and Caution . . . . . . . . . . . . . . . . . . . 55
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 56 - 57
MiniDisc System Limitations . . . . . . . . . . . . . . . . . . 58
Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . 59 - 61
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . 62 - 63
-
t
„ Basic Operation
Long Time Recording and Group Recording . . . . . .16
Group Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 - 21
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 - 24
I
-Cont
TERMS OF GUARANTEE . . . . . . . . . . . . . .Backcover
„ Useful Features
Advanced Playback . . . . . . . . . . . . . . . . . . . . . . 25 - 27
Advanced Recording . . . . . . . . . . . . . . . . . . . . . 28 - 33
Recording from a Microphone. . . . . . . . . . . . . . 34 - 37
Checking Displays . . . . . . . . . . . . . . . . . . . . . . . 38 - 39
Imp
3
01/8/30 1.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Special Notes
„ Warnings
z The supplied AC adaptor contains no user serviceable
parts. Never remove covers unless qualified to do so.
It contains dangerous voltages, always remove mains
plug from the main outlet socket before any service
operation or when not in use for a long period.
z The AC adaptor supplied with the MD-MT888H must
not be used with other equipment.
z To prevent fire or shock hazard, do not expose this
appliance to dripping or splashing liquids. No objects
filled with liquids, such as vases, shall be placed on
the apparatus.
t
u
e-s
z Never use an AC adaptor other than the one specified.
Otherwise, problems or serious hazards may be cre-
ated.
o
t
Nto
I
cai
„ Caution
z When recording important selections, make a prelimi-
nary test to ensure that the desired material is prop-
erly recorded.
z SHARP is not liable for damage or loss of your record-
ing arising from malfunction of this unit.
Ipm
4
01/8/30 1.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
z At full volume, prolonged listening to a personal stereo
may damage the user's hearing. This model complies
with the law if used with the correct earphones (model
number RPHOH0004AWZZ). If the earphones are
damaged in any way, please order using the model
number given above.
„ Notes
z Recording and playback of any material may require
consent, which SHARP is unable to give. Please refer
particularly to the provisions of the Copyright Act
1956, the Dramatic and Musical Performers Protection
Act 1958, the Performers Protection Acts 1963 and
1972 and to any subsequent statutory enactments
and orders.
z This equipment complies with the requirements of
Directives 89/336/EEC and 73/23/EEC as amended
by 93/68/EEC.
z This product is classified as a CLASS 1 LASER
PRODUCT.
z Use the Portable MiniDisc Recorder only in accord-
ance with the instructions given in this manual and do
not attempt to interfere with the interlock switch or
make any other adjustment as this may result in expo-
sure to hazardous radiation.
t
u
z US and foreign patents licensed from Dolby Laborato-
ries.
es-
d
z The letters in brackets contained in the model number
indicate the colour of the product only. Operation and
specifications are unaffected.
t
Laser Diode Properties
z Material: GaAIAs
z Wavelength: 785 nm
z Pulse time:
Not
I
cia
Read mode: 0.8 mW Continuous
Write mode: max 10 mW 0.5S
min cycle 1.5S
Repetition
Imp
5
01/8/30 1.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Precautions
z SHARP is not responsible for damage due to improper
use. Refer all servicing to a SHARP authorised serv-
ice centre.
„ Important
z Do not wear your earphones when you are crossing
streets or near traffic.
z Do not use your earphones whilst
driving a motor vehicle, it may cre-
ate a traffic hazard and may be ille-
gal. Remember to obey all of the
safety rules in your area.
„ Storing the unit
Avoid using or leaving the unit in the following
places.
z Places exposed to direct sunlight for many hours
(especially in cars with the doors and windows closed)
or near heaters. (The cabinet may deform, change col-
our or the unit may malfunction.)
z Places exposed to excessive dust.
z Places exposed to water.
z Places where temperatures are excessively high or
low.
z Places (bathrooms) where the humidity is extremely
high.
z Places with strong magnetic fields such as TVs or
loudspeakers.
z Places exposed to vibration.
z Places where sand can easily enter the inside of the
unit (beaches etc.).
z If the unit is used near radio tuners or TVs, noise and/
or picture interference may result. If you experience
these problems, move the unit away from such
devices.
z It is not recommendable to put the
MiniDisc into a rear pocket, as this
may damage the product when sit-
ting.
n
z Do not play the unit at a high volume. Hearing experts
advise against extended listening at high volume lev-
els.
z If you experience ringing in your ears, reduce the vol-
ume or discontinue use.
z No naked flame sources, such as lighted candles,
should be placed on the apparatus.
z Attention should be drawn to the environmental
aspects of battery disposal.
z The apparatus is designed for use in moderate cli-
mate.
z This portable MD should only be used within the range
of 0°C - 40°C (32°F - 104°F).
To avoid accidental electric shock or other possible
problems, observe the precautions listed below.
z Do not disassemble or modify the unit.
z Do not drop or subject the unit to shock.
z Do not use the unit near open flames.
z Do not spill liquid on the unit.
u
o
r
inos-
I
eac
Ipm
z
Do not use an external power supply, other than the 2 V
DC supplied with this unit as it may be damaged.
6
01/8/30 1.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Names of Controls and Indicators
„ Main unit
2
1
3
Reference page
4
1. Synchronised Recording Button . . . . . . . . . . . (28)
2. Mode Button . . . . . . . . . . . . . . . . . . . . . . (19, 26, 29)
3. Volume Buttons . . . . . . . . . . . . . . . . . . . . . . . . . (24)
4. Record Button . . . . . . . . . . . . . . . . . . . . . . . (19, 31)
5. Play/Pause/Stop/Power Off/Hold/Fast Forward/
Fast Reverse Button . . . . .(19 - 21, 23 - 25, 40, 51)
6. Rechargeable Battery Cover . . . . . . . . . . . . . . . (10)
7. 2 V DC Input Socket . . . . . . . . . . . . . . . . . . . . . . (12)
8. Optical/Line Input Socket . . . . . . . . . . . . . . (14, 15)
9. Microphone Input Socket . . . . . . . . . . . . . . . . . (34)
10. Remote Control/Earphones/
5
-
s
7
tor
n
6
u
12
o
t
a
Line Output Socket . . . . . . . . . . . . . . . . . . . (18, 22)
11. Open Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . (13)
12. 3-Colour Indicators . . . . . . . . . . . . . . . . . . . (23, 53)
13. Battery Indicator
I
ntr
14. Disc Mode Indicator
15. Synchro Recording Indicator
16. Record Indicator
17. TOC Indicator
8
9
o
11
10
18. Group Indicator
a
15 16 17 18
14
19
20
Imp
19. Repeat Indicator
20. Random Indicator
21. Level Meter
22. Recording Mode Indicators
13
23. Track Number Indicator
21 22
23
7
01/8/30 1.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Names of Controls and Indicators (continued)
„ Remote control unit
Reference page
3
4
5
2
6
1
1. Earphones Socket . . . . . . . . . . . . . . . . . . . . . . (22)
2. Record Button . . . . . . . . . . . . . . . . . . . . . . . (19, 31)
3. Volume Buttons . . . . . . . . . . . . . . . . . . . . . . . . . (24)
4. Mode/Display Button. . . . . . . . . . . . . . . (19, 26, 38)
5. Group/Clear Button . . . . . . . . . . . . . . . . . . . (16, 21)
6. Menu Button. . . . . . . . . . . . (19 - 21, 23 - 25, 27, 40)
7. Hold Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . (51)
8. Disc Mode Indicator
-
s
tro
7
n
u
9. Group Name Indicator
o
10. Disc Name Indicator
11. Group Indicator
t
a
12. Total Track Number Indicator
13. Synchro Recording Indicator
14. Record Indicator
I
8
9
10
11
15
nrt
15. Random Indicator
16. Repeat Indicator
17. Recording Mode Indicators
18. Track Number Indicator
19. Character/Time Information Indicator
20. Battery Indicator
12
16
17
o
13
14
18
19
20
a
Ipm
8
01/8/30 1.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Menu button operation
Various operations are performed by moving the M but-
ton on the remote control all around or pressing it.
Menu display
When the unit enters the menu mode, the initial letter of
each menu will be displayed in the first line and the con-
tents of the selected menu in the second line.
-
s
tor
o
u
o
Note:
t
If you move the M button toward
...
a
Playback, pause, selecting a character
Display of the initial letter of the menu depends on
the used conditions.
(Whilst stopped, playback, paused, digital-recording,
analogue-recording, microphone recording, or when a
group-recorded MD or non-group MD is loaded)
If you move the M button toward
...
I
Fast reverse, selecting a track, menu, and setting
item, moving cursor, adjusting recording level, select-
ing a character
ntr
If you move the M button toward
...
o
Fast forward, selecting a track, menu, and setting
item, moving cursor, adjusting recording level, select-
ing a character
a
If you move the M button toward ...
Stop, power off
If you press the M button...
Imp
Displaying a menu, determining a menu, setting item,
and character
9
01/8/30 1.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Using with the Rechargeable Battery
„ Charging
When the rechargeable battery is used for the first time
or when you want to use it after a long period of disuse,
be sure to charge it fully.
1 Insert the rechargeable battery.
-
y
r
2 Connect the AC adaptor.
e
t
3 Place the unit on the battery charger.
Bta
z When the portable MD is turned on or operating, the
battery will not be charged.
l
n
e
z No operation can be performed whilst charging. If you
try to operate, "CH" will appear.
ait
z After the rechargeable battery is charged or used, it
will get slightly warm. This is normal.
a
R
Caution:
e
z Use the specified battery AD-N55BT only. Do not
charge a battery (nickel-cadmium, alkaline, etc.) other
than that specified.
P
z Do not remove the outer cover of the re-
chargeable battery. It may cause heat gen-
eration, fire, or explosion.
z Do not dip the battery in water, do not dis-
pose of it in a fire, and do not take it apart.
snigw
z If the rechargeable battery terminal is dirty, charging
may not start. In such a case, wipe off the dirt with a
dry cloth.
z Do not disassemble the battery.
10
01/8/30 2.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
„ Display of remaining amount of battery
„ Charging time
When the unit is set on the charger, the remaining
amount of battery is displayed.
Charging is completed in about 3 hours, and the dis-
play of remaining amount of battery will go out.
90 % of charging is completed. If you leave it for another
2 hours, the battery will be fully charged.
z Charge the battery within the range of 5°C - 35°C
(41°F - 95°F).
Display
Conditions
Charging.
-
y
r
e
t
z The unit can be left in the charging state after it is
completed.
Bat
Scroll
l
Refresh
n
Charging completed.
If you charge the battery before it runs out completely, the
operating time may be shortened. To avoid this, the bat-
tery is discharged automatically and refreshed.
When the unit is not set correctly
on the charger, the rechargeable
terminal is dirty, or foreign mate-
rial adheres to it, charging may
not be possible. (Wipe the termi-
nal with dry cotton swab.)
eab
ati
Turned off
a
R
p
Refreshing.
P
The unit reads the memory effect
of the rechargeable battery and
discharge the battery if neces-
sary. After refreshing, it starts
charging automatically.
Flashing
singw
11
01/8/30 2.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Using with the AC Adaptor
1 Take out the lead from the charger.
2 Connect the lead to the main unit (at DC IN
2 V socket).
3 Connect the AC adaptor.
Caution:
z If the AC adaptor is not used for a long period of time,
be sure to remove the plug from the socket for safety.
z Insert each plug fully.
-
r
o
t
p
a
n
d
Note:
o
A
When the power failure occurs whilst playing back music
using the AC adaptor, unplug the unit. If it is left plugged
in, playback may start automatically after the power is
restored.
C
ait
A
a
e
P
h
-sU
12
01/8/30 2.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Using with the Alkaline Battery
Use one commercially available alkaline battery (LR6, AA
size).
When using the alkaline battery, be sure to insert the
rechargeable battery also.
2
Back of the
portable MD
-
D
1
1 Open the battery case cover.
2 Insert an alkaline battery into the battery
aMi
case.
n
3 Attach the battery case to the unit.
Caution:
n
Do not put a rechargeable battery (nickel-cadmium bat-
tery, etc.) in the battery case.
/
ati
Inserting a MiniDisc
a
Bat
e
1 Slide the OPEN lever to release the com-
l
partment door.
P
2 Insert a MiniDisc as shown.
e
3 Close the compartment door.
Notes:
z Do not place the MiniDisc under the holder.
z If any resistance is felt, do not force the MiniDisc into
the unit, as it may cause damage to the unit. If resist-
ance is felt, remove the MiniDisc and reload it.
z The lid cannot be opened if "TOC" is displayed; refer
to the instruction on page 21.
singw
13
01/8/30 2.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Connections
You can record your favourite CDs or tapes to MD.
n
o
ait
a
e
s
P
14
01/8/30 2.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
n
o
ati
a
e
s
P
15
01/8/30 2.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Long Time Recording and Group Recording
When the group mode is selected for recording, tracks
are played by the group, starting with the first track of the
group.
„ Long time recording
Since this MD portable recorder adopts the 4 times long
recording mode, you can record many tracks on one MD
(supporting MDLP).
Up to 320 minutes of recording is possible on one MD (of
80 minutes).
i
When the group mode is cancelled, tracks will be num-
bered sequentially from the beginning.
„ Group recording
You can record tracks by the group of artists or albums,
etc. That MD can be played by selecting the group.
n
o
ait
Setting the group mode
e
1. Hold down the REC button on the remote control
for 2 seconds or more.
i
Recording is paused.
c
2. Hold down the GROUP button on the remote con-
trol for 1 second or more so that "GROUP" lights
up.
i
Rceor
B
To cancel the group mode
L
Hold down the GROUP button on the remote control for 1
second or more so that "GROUP" goes out.
Caution:
The group-recorded MD may not be properly
recorded or edited with other equipment.
16
01/8/30 3.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Group Playback
Using a group-recorded MD, you can play back tracks by
the desired group (albums, artists, etc.).
Setting the group mode
Inserting a group-recorded MD automatically sets
the unit to the group mode.
„ Playback of group-recorded MD
Example of group recording:
(The first group is displayed.)
n
If you eject the MD, the group mode is cancelled.
o
Depending on the selection of the group mode, play-
back of a group-recorded MD changes as follows.
-
To cancel the group mode
k
c
Whilst in the stop mode, hold down the GROUP button
for 1 second or more so that "GROUP" goes out.
ati
b
When the group mode is selected
("GROUP" lights up)
Tracks are played by the group, starting with the first track
of the group.
r
Note:
If a group-recorded MD is played back with the equip-
ment that does not support the group function, the disc
name will not be displayed correctly and the group name
will not be displayed at all. (Example) 0;BEST//1- 10;
You can select a group to play back.
c
l
s
-Gr
B
When the group mode is cancelled
("GROUP" goes out)
Tracks are numbered in the order they are recorded.
17
01/8/30 3.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Recording
n
o
ait
e
dnig-
o
O
-eR
s
B
18
01/8/30 3.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
1 Plug the remote control into the REMOTE
6 Press the PAUSE button on the stereo sys-
socket on the unit.
tem to enter the playback pause mode.
Here you can search for the track to record.
2 Hold down the REC button for 2 seconds or
more.
7 Press the MODE button repeatedly to select
You can perform the same operation by simply press-
ing the REC button on the main unit.
the recording mode (page 30).
n
o
3 To perform group record-
ing, hold down the
GROUP button for 1 sec-
ond or more so that
"GROUP" is lit.
ati
e
You can perform the same operation by pressing the
MODE button on the main unit.
ding-
z The unit is ready to record a new group. (To select
o
a group, refer to page 21.)
8 Move the M button toward
.
O
z When group recording is not performed, hold down
the GROUP button for 1 second or more so that
"GROUP" goes out.
-Re
You can perform the same operation by pressing the
s
button on the main unit.
z Setting for the group recording will not be changed
until a new setting is entered.
B
9 Begin playback on the stereo system, the
output will be recorded.
4 Begin playback on the stereo system con-
Notes:
nected to this portable MD.
z Changing the volume level whilst recording does not
affect the recording.
5 Move the M button toward
or
to adjust
z You cannot adjust the bass level whilst recording.
z After the group recording is performed, non-group
tracks will be moved behind the groups and track num-
bers will be changed.
the recording level (page 20).
You can perform the same operation by holding down
the or button on the main unit.
19
01/8/30 3.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Recording (continued)
To interrupt recording
„ Recording level
Analogue recording
Adjust the recording level so that the maximum sound
volume from the source makes the reading swing some-
where between -4 dB and 0 dB.
Move the M button toward
.
z Recording starts by moving the M button toward
again.
z You can perform the same operation by pressing the
button on the main unit.
z The track number will be increased by one each time
the recording is interrupted.
You can check the level on the LCD of the main unit.
n
o
To stop recording
Move the M button toward
.
z You can perform the same operation by pressing the
button on the main unit.
ait
z When recording stops, "TOC" appears. Whilst "TOC"
appears, the MiniDisc recorded contents have not yet
been updated.
e
Digital recording
You can adjust the level in 1dB increments within the
range of +12 - -12dB.
dnig-
o
z To prevent the new recording from being lost, it is not
possible to remove the MiniDisc whilst "TOC" is dis-
played.
You can check the level on the LCD of the remote control.
c
-eR
s
To update the recorded contents of the
MiniDisc
B
Once you adjust the digital recording level, the setting is
retained even after the recording stops. (For cancellation
instructions, see page 52.)
Whilst in the stop mode, move the M button toward
.
You can perform the same operation by pressing the
button on the main unit.
z The power turns off after recorded contents have been
updated on the MiniDisc.
20
01/8/30 3.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
About the TOC
„ Adding tracks to an existing group
After any recording or editing function, "TOC" (Table Of
Contents) is displayed. To finalise the recording or editing
function, turn the power off. During this process "TOC"
will flash and "T-EDIT" will be displayed. During any
recording or editing function, the MiniDisc unit lid is
locked, and the MiniDisc cannot be removed until the
process is finalised.
Hold down the REC button for 2 seconds or more.
Hold down the GROUP button for 1 second or
more to display "GROUP".
1
2
Press the M button.
3
4
The unit enters the menu select mode.
Move the M button toward
or
to select "G(GrSE-
LECT)" and press it.
n
o
Warning:
If the power is removed (Battery/AC adaptor) whilst
"TOC" is displayed, the MiniDisc unit lid will remain
locked until the battery/main power is restored and the
unit is turned on. Your new recordings or edited changes
will be lost and your MiniDisc may become unusable.
Move the M button toward
group you want to add tracks to and press it.
or
to select the
5
ati
NEWGr
To create a new group.
e
ding-
Gr01, Gr02, Gr03...
r
Caution:
To add tracks to an existing group. (If the group name
has been recorded, the name will be displayed in-
stead of "Gr01".)
Whilst "TOC" or "T-EDIT" is displayed, follow the instruc-
tions below.
c
-Re
s
NonGr
-
-
-
Do not jerk or bump the unit.
Do not unplug the AC adaptor.
Do not remove the rechargeable battery or an alka-
line battery.
To record tracks as non-group.
B
Start recording.
6
z Complete the operation within 25 seconds whilst
selecting the menus.
z If you press the CLEAR button during the operation,
the previous display appears.
-
Do not subject the unit to shock.
Otherwise, tracks may not be recorded properly.
z To cancel the operation, move the M button toward
.
21
01/8/30 3.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Playback
n
o
ait
-
e
a
l
c
s
B
22
01/8/30 3.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
To interrupt playback
During playback, move the M button toward
z You can perform the same operation by pressing the
button on the main unit.
.
1 Plug the remote control and earphones
into the unit.
z Playback starts by moving the M button toward
again.
2 Insert a MiniDisc (page 13).
To stop playback
During playback, move the M button toward
Inserting a group-recorded MD automatically sets
the unit to the group mode.
.
z You can perform the same operation by pressing the
button on the main unit.
z If the unit is not operated for at least 2 minutes whilst
in the stop mode, the power will shut off automatically.
To turn off the power
3 Start playback by moving the M button to-
n
o
ward
.
z Playback starts automatically with a playback
only MiniDisc or a MiniDisc which is protected
against accidental erasure (Auto-play function).
ati
Whilst in the stop mode, move the M button toward
.
-
z You can perform the same operation by pressing the
button on the main unit.
e
z You can perform the same operation by pressing
y
„ 3-colour indicators
the
button on the main unit.
a
Green
Yellow
c
Notes:
s
z If power failure occurs whilst playing a disc using the
AC adaptor, disconnect it from the wall socket. Other-
wise, playback may start automatically when electricity
resumes.
Orange
B
Green light flashing
z If you connect the AC adaptor without installing the
rechargeable battery, playback may start automati-
cally. Be sure to turn off the power.
Stereo playback or monaural playback
Yellow light flashes twice
2 times long playback (stereo)
Orange light flashes four times
4 times long playback (stereo)
Light flashes in order from green
Fast forward
Light flashes in order from orange
Fast reverse
23
01/8/30 3.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Playback (continued)
„ Volume control
„ To search a desired group
Press the VOLUME+ button to increase the volume and
the VOLUME- button to decrease the volume.
1 Press the GROUP button so that the
"GROUP" flashes.
„ Bass control
1 Press the M button.
2 Move the M button toward
or
to select
n
o
"B(BASS)" and press it.
In the group mode, track numbers in the group are
displayed.
3 Move the M button toward
or
to select
ait
-
2 Within 5 seconds, move the M button to-
the bass strength and press it.
e
ward
or
to select the desired group.
O(OFF)
Cancelled.
1(BASS1)
2(BASS2)
3(BASS3)
Emphasised slightly.
Emphasised more.
Emphasised fully.
b
To start playback whilst in the stop mode, move the
M button toward
.
c
z Complete the operation within 25 seconds whilst
selecting the menus.
s
z If you press the CLEAR button during the operation,
B
the previous display appears.
z To cancel the operation, move the M button toward
.
Notes:
z Reduce the volume before starting to play. MiniDiscs,
compared to ordinary cassette tapes, have very little
noise. If the volume is adjusted according to your
usual expectations of noise, high volume may damage
your hearing.
z The sound escaping from your earphones may annoy
people around you. In particularly crowded places
(such as on trains or buses), reduce the volume.
24
01/8/30 3.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Advanced Playback
„ To locate the beginning of a track
To move to the beginning of the next track:
During playback, move the M button toward
once.
To restart the track being played:
During playback, move the M button toward
once.
once.
once.
To locate the next track:
In the stop mode, move the M button toward
-
To locate the previous track:
In the stop mode, move the M button toward
e
k
u
bac
z To skip a number of tracks at one time, move the M
button toward or repeatedly until the desired
„ To locate the desired portion
track number is shown.
z When you move the M button toward
For audible fast forward:
During playback, keep moving the M button toward
, playback
.
.
starts from the beginning of the track.
z You can perform the same operation by pressing the
ulFea
For audible fast reverse:
During playback, keep moving the M button toward
a
or
button on the main unit.
e
z Normal playback will resume when the M button is re-
leased.
U
z When the end of the last track is reached during fast
forward, the unit will enter the pause mode. When the
beginning of the first track is reached during fast re-
verse, the unit will enter the playback mode.
z You can perform the same operation by holding down
the
or
button on the main unit.
25
01/8/30 4.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Advanced Playback (continued)
z Repeat play lasts until you stop the unit.
„ Random play or repeat play
During playback, press the MODE button repeatedly
to select the playback mode.
z In random play the unit will select and play tracks auto-
matically. (You cannot select the order of the tracks.)
After all of the tracks have been played once in random
order, the unit will stop automatically.
z During random, random repeat, or single track repeat
play, you can forward or reverse the MiniDisc only
within the track being played.
Notes:
z If the playback mode is selected whilst stopped, move
the M button toward
to start playback.
z When "TOC" is displayed, random play or repeat play
is impossible.
z During random play, the unit cannot find the beginning
of any track which has been played.
-
e
k
u
Display on the remote control
When the group mode is selected
("GROUP" lights up)
When the group mode is cancelled
("GROUP" goes out)
bca
RANDOM (Random playback)
Tracks are played back at random
After all tracks are played back at ran-
within a group and playback stops au- dom, playback stops automatically.
tomatically after all tracks are ended.
ulFea
d
RANDOM (Random repeat play-
back)
Tracks are played back at random
within a group and groups are played repeatedly.
repeatedly in order.
All tracks are played back at random
e
U
(All tracks repeat playback)
All tracks are played back repeatedly All tracks are played back repeatedly
in order.
in order.
1
(1 group repeat playback/1 track The selected group is played back re- The selected track is played back re-
repeat playback)
peatedly.
peatedly.
No display
Normal group playback
Normal playback
26
01/8/30 4.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
„ To play at double speed
A MiniDisc recorded in the monaural mode can be played
back at double speed audibly. (Monaural recording, page
29)
1 During playback, press the M button.
The unit enters the menu select mode.
2 Move the M button toward
or
to select
-
"F(FAST)" and press it.
e
k
„ Intro play
u
3 Move the M button toward
or
to select
bac
You can listen to the beginning of each track for 5 sec-
onds in the recorded order.
"F(FAST)" and press it.
z If a track recorded in the stereo mode is reached
during the double-speed playback, it will be can-
celled.
Whilst the playback is stopped or
paused,
Keep moving the M button toward
for 2 seconds or more.
z Depending on the recorded materials, it may be
difficult to hear them.
ulFea
P
e
z Complete the operation within 25 seconds whilst
selecting the menus.
z If you press the CLEAR button during the operation,
the previous display appears.
z Intro play cannot be performed whilst the random, ran-
dom repeat, or one-track repeat mode is selected. In
this case, normal playback starts.
U
z If any operation is performed whilst in the pause mode,
intro play starts from the next track.
z To cancel the operation, move the M button toward
.
To interrupt fast playback
During playback, move the M button toward
z The same operation can be performed by pressing the
button on the main unit for 2 seconds or more.
.
z If you move the M button toward
speed playback starts.
again, the double-
To return to normal playback
To return to normal playback
Select "N(NORMAL)" in step 3 and press the M button.
Move the M button toward
.
27
01/8/30 4.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Advanced Recording
„ Playback sound-actuated recording
Recording automatically starts or pauses by detecting
sound from the stereo system (Synchronised recording).
5 Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
Select the starting point for your recording and press
the PAUSE button.
6 Press the MODE button repeatedly to select
the recording mode (page 29).
7 Press the M button.
z The unit enters the menu select mode.
z You can perform the same operation by pressing
the SYNC button on the main unit. (At this time,
steps 8-9 can be omitted.)
e
i
u
1 Hold down the REC button for 2 seconds or
8 Move the M button toward
more.
or
to select
You can perform the same operation by simply press-
ing the REC button on the main unit.
"S(SYNC)" and press it.
c
ulFea
9 Press the M button.
Synchro recording will be
paused.
2 To perform group recording, hold down the
acn
e
GROUP button for 1 second or more so that
"GROUP" is lit.
U
When group recording is not performed, hold down
the GROUP button for 1 second or more so that
"GROUP" goes out.
10Begin playback on the stereo system. Re-
cording will begin automatically.
3 Begin playback on the stereo system con-
nected to this portable MD.
4 Move the M button toward
or
to adjust
the recording level (page 20).
You can perform the same operation by pressing the
or button on the main unit.
28
01/8/30 4.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
To interrupt recording
„ Long-play recording
z When the stereo system is stopped, the unit will enter
the synchro recording pause mode. When playback is
resumed, the recording will be resumed.
z If a silence lasts for 3 seconds or more, the recording
will be paused (pause function does not work for
approximately 10 seconds after a recording starts).
When the unit receives sound again, recording auto-
matically starts.
2 times and 4 times long recording
Double or quadruple time of stereo recording is possible.
Monaural recording
In monaural, you can record twice as long as the stereo
recording.
A track recorded in monaural can be played back in dou-
ble speed, see page 27.
z A new track number is created when the recording
resumes.
e
1 When a recording is paused, press the
i
MODE button repeatedly to select the re-
r
cording mode.
Each time the button is pressed, the display will
change as follows.
d
ulFea
anc
f
U
2 Start recording.
The recording mode remains unchanged until a new
mode is selected.
29
01/8/30 4.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Advanced Recording (continued)
Notes:
„ About the recording mode
z Tracks can be recorded in stereo recording mode, 2
times long recording mode, and 4 times long recording
mode on one MiniDisc.
z In monaural recording, the sound on the right and left
channels is mixed even if the input source is in stereo.
Although you can hear the stereo sound from the ear-
phones, the recorded sound is monaural.
z Tracks recorded in 2 times long recording and 4 times
long recording modes cannot be played with the unit
that does not support these modes. On such a unit, no
sound is heard. (The operation and the display may
vary depending on the unit.)
You can select the recording mode from stereo recording,
2 times long recording, 4 times long recording, and mon-
aural recording. Recordable time varies depending on
the recording mode. If the tracks are recorded on an 80-
minute MiniDisc, its recording time changes as follows:
Indication
Recording mode
Recording
time
SP
Stereo
MAX. 80 min.
e
i
LP2
2 times long (stereo) MAX. 160 min.
4 times long (stereo) MAX. 320 min.
r
LP4
z Tracks recorded in monaural cannot be played if
equipment does not support the monaural playback.
MONO
Monaural
MAX. 160 min.
d
„ About ATRAC
„ Caution for 4 times long recording
ulFea
The ATRAC (Adaptive TRansform Acoustic Coding) sys-
tem compresses the sound data into 1/5 by cutting out
the inaudible sound. Since the sound is selected based
on psychoacoustics masking, the sound quality is not
impaired. This unit is equipped with the ATRAC3 com-
pressing system that can reduce the sound data to 1/10
or 1/20 of its original size. By employing this system, 2
times and 4 times long recordings are enabled in stereo
mode.
(LP4)
acn
e
Special compressing method allows the 4 times long
recording to realise long-time stereo recording. There-
fore, some noise is recorded occasionally. If sound qual-
ity should be emphasised, stereo recording or 2 times
long recording is recommended.
U
30
01/8/30 4.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
„ To create your own track numbers
„ Recording tracks as a single track
You can create your own track numbers at any point.
You can record several pieces of music as a single track
by disabling the auto marker function.
Whilst recording, press the REC button at the point
where you want to create track numbers.
1 Whilst the recording or recording is paused,
press the M button.
The track number will be increased by one.
The unit enters the menu select mode.
z One track number will be added every time the REC
button is pressed.
2 Move the M button toward
or
to select
s
i
"M(MARK)" and press it.
Numbering restriction
u
If you try to number more than 10 tracks in certain
amount of time, "Sorry" will be displayed and the opera-
tion will be disabled.
In that case, wait until the next operation can be
resumed.
3 Move the M button toward
or
to select "A(AU-
TO)" and press it.
d
ulFea
z Complete the operation within 25 seconds whilst
selecting the menus.
z If you press the CLEAR button during the operation,
the previous display appears.
In stereo recording
Within 40 seconds
anc
f
In 2 times long recording Within 80 seconds
In 4 times long recording Within 160 seconds
U
z To cancel the operation, move the M button toward
.
In monaural recording
Within 80 seconds
Note:
When making digital recordings using a CD player or an
MiniDisc player, track numbers will be created automati-
cally regardless of the setting of the auto marker function.
31
01/8/30 4.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Advanced Recording (continued)
z Track numbers may not be created in proper places,
depending on the source to be recorded from, such as
signals with noise.
z The track numbers on the playback side may not
match the track numbers recorded on the MiniDisc.
z When recording, if a programmed playback is per-
formed by the source or playback is performed by
selecting tracks manually, the MiniDisc track numbers
may not be the same as on the source.
„ About track numbers
1. Track numbers are created automatically during re-
cording via the analogue connection when a silence
of 1 second or more is detected (Auto marker func-
tion). A series of tracks can be recorded as one by
disabling the auto marker function, see page 31.
z Track numbers may not be created properly, depend-
ing on the connected stereo system.
e
i
u
2. When recording from a CD or a MiniDisc using the
digital connection, track numbers will be created at
the same points as on the CD or MiniDisc (Synchro
marker function).
d
ulFea
acn
First track Second track Third track
Playback
e
side
Track A
Track B
Track C
U
First track Second track Third track
Track A Track B Track C
Recording
side
32
01/8/30 4.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
„ To prevent recorded MiniDiscs from
„ About sampling rate converter
This portable MD incorporates a sampling rate converter
meaning it can record from digital radios or DAT tape
recorders.
being erased accidentally
Slide the accidental erase prevention tab, located on the
side of the MiniDisc, in the direction indicated by the
arrow.
„ Note for digital recording
The MiniDisc will then be protected against accidental
erasure.
You cannot copy a MiniDisc that you recorded from digital
inputs to another MiniDisc or DAT. It is prevented by the
SCMS (Serial Copy Management System). Recording
from analogue inputs is not affected.
e
i
u
Digital signals
Digitally recorded Cannot record
MiniDisc
To add a recording to such a MiniDisc, slide the acciden-
tal erase prevention tab back to its original position.
d
ulFea
„ Helpful tip when attaching a label
anc
f
When attaching a label to an MiniDisc cartridge, be sure
to note the following. If the label is not attached properly,
the MiniDisc may jam inside the unit and you may not be
able to remove it.
U
z If the label peels off or partially lifts
away, replace it with a new one.
z Do not put a new label on top of an ex-
isting one.
z Attach the label only in the specified
location.
33
01/8/30 4.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Recording from a Microphone
„ To record from a microphone
1 Connect a stereo microphone to the MIC
IN socket.
2 Insert a recordable MiniDisc (page 13).
3 Hold down the REC button for 2 seconds
or more.
You can perform the same operation by simply
pressing the REC button on the main unit.
hnoe-
e
o
u
c
4 To perform group recording, hold down
the GROUP button for 1 second or more so
that "GROUP" is lit.
When group recording is not performed, hold down
the GROUP button for 1 second or more so that
"GROUP" goes out.
o
ulFea
e
i
s
-
34
01/8/30 4.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
To interrupt recording
5 Move the M button toward
or
to ad-
Move the M button toward
.
z Recording starts by moving the M button toward
again.
z You can perform the same operation by pressing the
just the recording level.
The same operation can be performed by pressing
the or button on the main unit.
button on the main unit.
z The track number will be increased by one each time
the recording is interrupted.
To stop recording
Move the M button toward
.
hone-
e
You can perform the same operation by pressing the
button on the main unit.
o
u
c
To write recorded contents on the MiniDisc
Move the M button toward whilst in the stop mode.
Level meter indicator
Adjust the recording level so that the maximum
sound volume from the source makes the reading
swing between -4 dB and 0 dB.
Notes:
z Whilst making a mic recording, do not connect any-
thing to the OPTICAL/LINE IN socket on the portable
MD.
o
ulFea
e
6 Press the MODE button repeatedly to se-
i
z To use a microphone, be sure it is a plug-in-power
type microphone.
lect the recording mode (page 29).
U
- When a plug-in-power type microphone is plugged in,
the portable MD will provide power for the microphone's
operation.
7 Move the M button toward
.
-
z You can perform the same operation by pressing
the button on the main unit.
- If a different type of microphone is plugged in, it may not
operate properly or it may cause the unit to malfunction.
z Recording will start.
z Insert the plug firmly. If you don't, the recording will not
be made properly.
z Use a microphone with a 3.5 mm (1/8") diameter
stereo mini plug.
35
01/8/30 4.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Recording from a Microphone (continued)
„ Sound-actuated recording (Mic Syn-
7 Move the M button toward
or
to select
chronised recording)
the recording sensitivity and press it.
H (High): Recording starts when the unit detects -24
dB or more (the unit can start recording
from quiet sounds).
The unit automatically pauses when the microphone
does not pick up any sound for 3 seconds or more.
(Pause function does not work for approximately 10 sec-
onds after a recording starts.) When the microphone
picks up sound again, recording starts automatically.
L (Low): Recording starts when the unit detects -12
dB or more.
1 Hold down the REC button for 2 seconds or
8 Press the M button.
more.
z The unit enters the menu select mode.
z You can perform the same operation by pressing
the SYNC button on the main unit. (At this time,
steps 9-10 can be omitted.)
hnoe-
You can perform the same operation by simply press-
ing the REC button on the main unit.
s
o
u
c
2 To perform group recording, hold down the
GROUP button for 1 second or more so that
"GROUP" is lit.
9 Move the M button toward
or
to select
When group recording is not performed, hold down
the GROUP button for 1 second or more so that
"GROUP" goes out.
"S(SYNC)" and press it.
m
ulFea
10Press the M button.
Synchro recording will be
paused.
3 Move the M button toward
or
to adjust
e
g
the recording level (page 20).
The same operation can be performed by pressing
the or button on the main unit.
U
11When a sound, such as person speaking, is
4 Press the MODE button repeatedly to select
o
picked up by the microphone, recording will
begin automatically.
the recording mode (page 29).
5 Press the M button.
Notes:
The unit enters the menu select mode.
z If the unit starts recording too often from low unwanted
noises, set the microphone input to "L(Low)".
z Recording sensitivity can be changed whilst recording.
6 Move the M button toward
or
to select "M(MIC
SYNC LEVEL)" and press
it.
36
01/8/30 4.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
z If you press the CLEAR button during the operation,
the previous display appears.
„ Track intervals
When recording from the microphone, track numbers will
be created automatically at regular intervals (default set-
ting: approximately every 5 minutes). During a mic syn-
chro recording, the unit pauses when a silence lasts for 3
seconds or more, and creates a track number.
z To cancel the operation, move the M button toward
.
Example: Set to "5 minutes".
During a mic manual recording
Timed auto marks will be created every 5 minutes.
Changing intervals between tracks
1 Whilst the recording or recording is paused,
hone-
s
press the M button.
o
The unit enters the menu select mode.
u
c
2 Move the M button toward
During a mic synchro recording
or
to select "T(TIME
If a silence lasts for 3 seconds or more, a timed auto
mark will be created 5 minutes after the previous mark is
created.
MARK)" and press it.
o
3 Move the M button toward
ulFea
or
to select the de-
e
g
sired interval and press it.
O(OFF): No track numbers are created automatically.
U
1(10min): A new track number is created every 10 min-
utes.
-
5(5min): A new track number is created every 5 min-
utes.
3(3min): A new track number is created every 3 min-
utes.
Creating track numbers manually
Press the REC button whilst recording.
4 Track numbers will be created automatical-
ly at regular intervals.
z Complete the operation within 25 seconds whilst
selecting the menus.
37
01/8/30 4.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Checking Displays
„ To check the remaining recording time
„ To display the playing time of an indi-
and the total playing time
vidual track
1 Whilst in the stop mode, move the M button
Whilst in the stop mode, hold down the DISP
button for 1 second or more.
Each time the button is pressed, the display will change
as follows.
toward
name.
or
to select a track number or
e
y-s
2 Hold down the DISP button for 1 second or
u
more.
a
ulFea
Once displaying the playing time, just select the de-
sired track number to display its playing time.
Disc name when
"GROUP" is off
Total playing time when
"GROUP" is off
e
-hCec
s
Group name when
"GROUP" is on
Total playing time of the
selected group when
"GROUP" is on
Track number
Track name
Playing time
In the group mode, track numbers in the group are dis-
played.
Remaining recording time
z Remaining recording time varies depending on the set
recording mode.
z Remaining recording time will not be displayed with a
playback only MiniDisc.
38
01/8/30 4.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
„ To check the elapsed time and remain-
„ Checking the remaining amount of bat-
tery level
ing time of the track
The remaining amount of battery level is shown by the
battery indicator (
) during operation.
Whilst the playback or the playback is paused,
hold down the DISP button for 1 second or
more.
Each time the button is pressed, the display will change
as follows.
e
ys-
z When the battery is completely discharged, the bat-
tery indicator will flash. Recharge the battery or
replace the alkaline battery with a new one.
z When the battery has run out completely, "LoBATT"
will appear. Then, the power will be disconnected
automatically.
u
l
ulFea
Track name
Remaining playback time
Elapsed playback time
Notes:
e
z If you use the battery which you stopped charging
halfway, "
" may appear. It does not mean that the
-Chec
battery is completely charged.
U
Notes:
z The battery indicator will not correctly display the
remaining capacity for approximately 20 seconds after
the power has been turned on.
z When the AC adaptor or a separately available car
adaptor is used, the battery indicator will not be
shown.
z If the disc name or the track name was not originally
recorded on the MiniDisc, "NoNAME" will be dis-
played.
z Elapsed playback time and remaining playback time
may be different from the actual time.
z The number of bars shown in the battery indicator may
increase or decrease, depending on the operation
being performed. This is normal.
39
01/8/30 4.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Titling a MiniDisc
z Load a MiniDisc to be named. A playback only or
recording prevented MiniDisc cannot be edited.
z The group-recorded MD may not be edited properly
with other equipment.
4 Move the M button toward
to select the type of char-
acters.
The group-recorded MD contains the menus that can-
not be edited if the group mode has been cancelled.
Select the group mode before editing.
You can perform the same operation by pressing the
MODE button repeatedly.
s
„ Creating a disc name
-
5 Move the M button toward
r
Whilst in the stop mode, check that "
played on the LCD.
TOTAL" is dis-
or
to select the char-
a
acter you want to enter.
If "
.
TOTAL" is not displayed, move the M button toward
c
F
6 Press the M button to enter it.
M
1 Whilst in the stop mode,
7 To enter more letters, repeat steps 4 - 6.
press the M button.
The unit enters the menu select
mode.
n
8 After entering all the characters, hold down
the M button for 1 second or more.
2 Move the M button toward
or
to
select
"N(NAME)" and press it.
A
3 Move the M button toward
or
to select
"D(DISC)" and press it.
The unit will enter the character input mode.
40
01/8/30 5.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
„ Creating a group name
„ Creating a track name
Select the group mode.
1 Whilst the track to be named is paused, press
1 Whilst in the stop mode, press the M button.
the M button.
The unit enters the menu select mode.
The unit enters the menu select mode.
2 Move the M button toward
2 Move the M button toward
or
to
select
or
to
select
"N(NAME)" and press it.
"N(NAME)" and press it.
e
3 Press the M button.
3 Move the M button toward
or
or
to select
to select
-
u
The unit will enter the character
input mode.
"G(GROUP)" and press it.
a
4 Move the M button toward
the group you want to name and then press it.
n
4 Enter the characters (page 40, steps 4 - 8).
F
The unit will enter the character input mode.
M
5 Enter the characters (page 40, steps 4 - 8).
z Complete the operation within 25 seconds whilst se-
n
lecting the menus.
z If you press the CLEAR button during the operation,
the previous display appears. (If you press this but-
ton whilst entering characters, the display you see
before entering characters appears.)
A
z To cancel the operation, move the M button toward
. (Whilst entering characters, press the CLEAR
button first and then move the M button toward .)
41
01/8/30 5.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Titling a MiniDisc (continued)
„ To erase a character
„ Characters (symbols)
Set the unit to character input mode.
Disc name : page 40, steps 1 - 3
Group name : page 41, steps 1 - 4
Track name : page 41, steps 1 - 3
1
A
S
B
T
C
U
D
V
E
F
X
G
Y
H
Z
I
J
K
/
L
l
M
m
N
n
O
o
P
p
Q
q
'
R
r
.
,
W
Press the VOLUME+ or VOLUME- button to move
the cursor to the character you want to erase, and
then press the REC button.
2
3
a
s
b
t
c
d
v
e
f
g
y
h
z
i
j
k
/
.
,
u
w
x
e
Hold down the M button for 1 second or more.
(
1
)
2
3
+
4
,
5
6
7
/
8
:
9
;
0
<
!
"
#
?
$
%
_
&
`
-
u
=
>
„ To add characters
.
@
a
Set the unit to character input mode.
Disc name : page 40, steps 1 - 3
Group name : page 41, steps 1 - 4
Track name : page 41, steps 1 - 3
1
2
3
Notes:
n
z One disc name and up to 99 group names and 255
track names can be created per disc. (A maximum of
40 characters for each disc, group and track name,
and a total of 1,700 characters can be entered per
disc.)
F
M
Press the VOLUME+ or VOLUME- button to move
the cursor to the character on the right of the position
where you want to add a character, and enter a char-
acter.
n
z You cannot use "/" in a name successively.
z The MD that has been group recorded with this unit
should not be named using other equipment. The disc
may not be played properly.
Hold down the M button for 1 second or more.
„ To enter a space
A
z If the number of characters entered as a disc, group or
track name exceeds 40, "N-FULL" will be displayed.
z When a disc, group, or track name that contains 40
characters is changed, "NAME CUT" will be displayed,
In this case, delete all the characters and reenter the
names.
Press the VOLUME+ button to move the cursor to the
right.
z If you enter "LP:" at the beginning of a name, "LP:"
may not be displayed.
42
01/8/30 5.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Editing a Recorded MiniDisc
„ To erase one track at a time
„ To erase all of the tracks at once
You can erase one track at a time.
You can erase all tracks at once.
1 During playback of the track to be erased,
1 Whilst in the stop mode, press the M button.
The unit enters the menu select mode.
move the M button toward
to pause it.
2 Move the M button toward
2 Press the M button.
or
to select "E(EDIT)"
The unit enters the menu select mode.
and press it.
3 Move the M button toward
e
or
to select "E(EDIT)"
Disc-
3 Move the M button toward
or
to select
and press it.
u
"A(ALL ERASE)" and press it.
a
4 Move the M button toward
or
to select
4 Press the M button.
All of the tracks will be erased.
"E(ERASE)" and press it.
e
F
5 Press the M button.
The track will be erased.
Caution:
Recor
Once a track has been erased, it cannot be recov-
ered. Check the track number before erasing it.
6 To erase other tracks, repeat steps 1 - 5.
Caution:
Once a track has been erased, it cannot be recov-
ered. Check the track number before erasing it.
nga
z Complete the operation within 25 seconds whilst se-
lecting the menus.
dit
A
z If you press the CLEAR button during the operation,
the previous display appears.
Note:
z To cancel the operation, move the M button toward
When all the tracks in a group have been erased, the
group and the group name will also be erased.
.
43
01/8/30 5.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Editing a Recorded MiniDisc (continued)
„ To divide a track
„ To move a track
You can divide a track into 2 tracks.
You can move a track to the desired position.
1 Play back the track to be divided, and move
1 Play back the track to be moved, and move the
the M button toward
at the point where you
M button toward
to pause it.
want to divide the track to pause it.
2 Press the M button.
2 Press the M button.
The unit enters the menu select mode.
The unit enters the menu select mode.
3 Move the M button toward
e
3 Move the M button toward
or
to select "E(EDIT)"
Dsic-
or
to select "E(EDIT)"
and press it.
u
and press it.
a
4 Move the M button toward
"M(MOVE)" and press it.
or
to select
4 Move the M button toward
"D(DIVIDE)" and press it.
5 Press the M button.
or
to select
e
F
5 Move the M button toward
or
to locate the posi-
The track will be divided into two
tracks, and the unit will pause at
the beginning of the second of the
two new tracks.
tion the track is moved to.
Rceor
6 Press the M button.
nga
The track will be moved, and the unit will be paused at
the beginning of the track.
When a track has a name before dividing:
dti
A
The two new tracks will have the same name. However, in
the "T-FULL" condition, the second track may not be
named.
Moving a track to another group
Group-recorded tracks can be moved within the group. To
move them to
a
different group, use the GROUP
CHANGE function.
Total number of tracks that can be divided:
Each disc can hold up to 255 tracks. However, even if the
number of assigned tracks has not reached 255, it might
not be possible to make any further divisions of tracks.
44
01/8/30 5.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
To combine two non-adjacent tracks:
„ To combine tracks
Two adjacent tracks can be combined.
z First, put the two tracks next to each other in the order
you want using the MOVE function. Then combine
them using the COMBINE function.
z For group-recorded tracks, only those in the same
group can be combined. To combine tracks in different
groups, move one track using the GROUP CHANGE
function before combining them.
When one or both tracks to be combined have a
name:
The first track name will be used. However, when the first
track does not have a name, the second track name will
be used.
1 Play back the second of the two tracks to be
combined and move the M button toward
pause it.
to
2 Press the M button.
The unit enters the menu select mode.
s
3 Move the M button toward
Disc-
or
to select "E(EDIT)"
u
and press it.
a
In the following cases, tracks may not be combined.
4 Move the M button toward
"C(COMBINE)" and press it.
5 Press the M button.
or
to select
e
z Tracks recorded by different inputs cannot be com-
bined.
F
Example:
z Digital recorded track and analogue recorded track.
z Different recording modes (stereo recording, 2 times
long recording, 4 times long recording, monaural re-
cording).
The two tracks will be combined,
and the unit will be paused at the
beginning of the combined track.
Recor
nga
z Tracks whose recording time is less than 12 seconds.
dit
A
z Complete the operation within 25 seconds whilst se-
lecting the menus.
z If you press the CLEAR button during the operation,
the previous display appears.
z To cancel the operation, move the M button toward
.
45
01/8/30 5.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Editing a Recorded MiniDisc (continued)
„ Moving a track to another group
„ Moving a group to the top
On a group-recorded MD, you can move a track to a dif-
ferent group. (Group change)
On a group-recorded MD, group-recorded tracks can be
moved to the beginning of the MiniDisc. (Group top
move)
1 Play back the track to be moved, and move
1 Whilst in the stop mode, select the group to be
the M button toward
to pause it.
moved (page 24).
2 Press the M button.
2 Press the M button.
The unit enters the menu select mode.
e
The unit enters the menu select mode.
3 Move the M button to-
Dsic-
3 Move the M button toward
ward
or
to select
u
"G(GROUP)" and press
it.
or
to
select
a
"G(GROUP)" and press it.
i
4
Move the M button toward
"C(GrCHANGE)" and press it.
or
to select
F
4 Move the M button toward
"T(GrTOPMOVE)" and press it.
5 Press the M button.
or
to select
5 Move the M button to-
ward
or
to select
Rceor
the group the track is
moved to.
The group will be moved to the
top of the MD.
nga
6 Press the M button.
Notes:
The track is moved to the end of the selected group,
and the playback is paused at the beginning of the
moved track.
dti
A
z If the group name has been recorded, the group name
will not be changed even if the GROUP TOP MOVE
function is performed.
z The GROUP TOP MOVE function cannot be per-
formed with non-group tracks or groups without tracks.
Notes:
z When all the tracks in a group are moved to different
groups, the group and the group name will be erased.
z Non-group tracks can also be moved to a group using
the GROUP CHANGE function.
46
01/8/30 5.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
„ Erasing a group
z Complete the operation within 25 seconds whilst se-
On a group-recorded MD, you can erase all tracks in a
group at once. (Group erase)
lecting the menus.
z If you press the CLEAR button during the operation,
the previous display appears.
1 Whilst in the stop mode, select the group you
want to erase (page 24).
z To cancel the operation, move the M button toward
2 Press the M button.
.
The unit enters the menu select mode.
e
3 Move the M button toward
Disc-
or
to
select
u
"G(GROUP)" and press it.
t
4 Move the M button toward
"E(Gr&TrERASE)" and press it.
5 Press the M button.
or
to select
e
F
The selected group will be
erased.
Recor
nga
Caution:
Once a group has been erased, it cannot be recovered.
Check carefully before you erase it.
dit
d
Note:
The GROUP ERASE function erases the group and
group name.
47
01/8/30 5.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Editing a Recorded MiniDisc (continued)
Master MiniDisc operation
„ Stamping titles from another MiniDisc
1 Insert a master MiniDisc.
Before stamping
Do not mistake the master MiniDisc for the target one.
When there are 2 MiniDiscs on which the same tracks
are recorded, you can transfer the character information
(disc, group, and track names) of the master MiniDisc to
another MiniDisc (for stamping) simultaneously.
2 Whilst in the stop mode, press the M button.
The unit enters the menu select mode.
3 Move the M button toward
or
to select "E(EDIT)"
e
and press it.
1. What is a master MiniDisc?
Dsic-
u
A recordable MiniDisc that contains tracks and charac-
ter information. (You cannot transfer the information
from a playback-only MiniDisc.)
4 Move the M button toward
a
or
to select "N(NAME
STAMP)" and press it.
e
F
5 Press the M button.
2. What is a MiniDisc for stamping?
Rceor
A MiniDisc that contains the same tracks in the same
order as the master MiniDisc. (Make sure that the total
number of tracks of the master MiniDisc and the one for
stamping are the same.)
nga
6 When the unit displays
dti
A
Notes:
"CHANGE MD", remove the
master MiniDisc.
z When information of the non-grouped MD is stamped
on the group-recorded MD, the disc and track names
will be stamped properly. However, the group informa-
tion will be erased.
Remove it without turning off the power. Or, the opera-
tion will be cancelled.
z When information of the group-recorded MD is
stamped on the non-grouped MD, tracks will be
grouped automatically.
48
01/8/30 5.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Operation of the MiniDisc for stamping
„ Creating a group before recording
You can create a group in advance and record tracks in it.
7 Load a MiniDisc for stamp-
ing.
1 Whilst in the stop mode, press the M button.
The unit enters the menu select mode.
2 Move the M button toward
or
to
select
"G(GROUP)" and press it.
8 Press the M button.
s
The unit will finish recording the
character information and enter
the stop mode.
Disc-
3 Move the M button toward
The unit will enter the character input mode.
4 Enter the group name (page
40, steps 4 - 7).
or
to select
u
"R(GrRESERVE)" and press it.
a
i
F
Note:
If the total number of tracks on the
master MiniDisc does not match
that on the MiniDisc for stamping,
the unit will display "Can'tE" and
turn off the power.
Otherwise, you will not be able to create a group.
Recor
5 Hold down the M button for 1 second or more.
The created group name will be displayed.
nga
Note:
dit
If this happens, adjust the total number of tracks on the newly
recorded MiniDisc using the edit operation.
A
Even if you create a group using the GROUP RESERVE
function, it will not be played if no track is recorded in it.
(Group name will not be displayed either.) To check the
contents of the group, refer to "To search a desired group
(page 24)".
z Complete the operation within 25 seconds whilst se-
lecting the menus.
z If you press the CLEAR button during the operation,
the previous display appears.
To record in the created group:
Refer to "Adding tracks to an existing group (page 21)".
z To cancel the operation, move the M button toward
.
49
01/8/30 5.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Editing a Recorded MiniDisc (continued)
„ Moving non-group tracks to after
„ Erasing group information
You can erase the entire group information of a group-
recorded MD. By erasing the group information of a MD, it
will be a non-group MD. (Group cancel)
group-recorded tracks
If non-group tracks are found in the middle of a group-
recorded MD, they can be moved to after group-recorded
tracks. (Group arrange)
1 Whilst in the stop mode, press the M button.
The unit enters the menu select mode.
1 Whilst in the stop mode, press the M button.
2 Move the M button toward
The unit enters the menu select mode.
e
or
to
select
2 Move the M button toward
Dsic-
"G(GROUP)" and press it.
or
to
select
u
"G(GROUP)" and press it.
a
3 Move the M button toward
"C(GrCANCEL)" and press it.
4 Press the M button.
or
to select
3 Move the M button toward
"A(GrARRANGE)" and press it.
4 Press the M button.
or
to select
e
F
The group information will be
erased.
Non-group tracks are moved to
after group-recorded tracks.
Rceor
Caution:
nga
The GROUP CANCEL function erases all the group infor-
mation. Check carefully before you erase it.
Note:
As the GROUP ARRANGE function moves all the non-
group tracks to the end of the MD, the order of tracks will
be completely changed.
dti
A
z Complete the operation within 25 seconds whilst se-
lecting the menus.
z If you press the CLEAR button during the operation,
the previous display appears.
z To cancel the operation, move the M button toward
.
50
01/8/30 5.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Hold Function
The present operation condition can be kept even if other buttons are accidentally pressed in a place such as a
crowded train.
e
u
a
F
-HoldFunction
If the battery is inserted or the AC adaptor is connected,
To cancel the hold mode
you can set this function even when the power is turned
off.
Move the HOLD switch away from the safety position (the
opposite direction of the arrow).
A
To cancel the hold mode
If the hold function is active whilst the power is turned
off, the power cannot be turned on by mistake and the
battery will not be drained.
Press and hold down the (HOLD) button for 2 seconds
or more whilst the unit is in the hold mode.
"oFF" will be shown.
51
01/8/30 5.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Changing Default Settings
Menu
B(BEEP)
Beep sound
Item
Beep on
1 Insert a MiniDisc.
Y(YES) *
N(NO)
2 Whilst in the stop mode, press the M button.
The unit enters the menu select mode.
Beep off
Set
3 Move the M button toward
A(AUTO PLAY) Y(YES) *
Auto play
P(PowerSave) Y(YES) *
or
to select "S(SET-
N(NO)
Cancelled
Set
UP)" and press it.
-
s
e
4 Move the M button toward
g
Auto power save
D(D-LEVEL)
N(NO)
Cancelled
Setting retained
Cancelled
r
or
to select a menu
1(D.L 1)*
2(D.L 2)
and press it.
a
Digital recording
level
5 Move the M button toward
e
or
to select an item
L(LIGHT)
N(NORM)*
A(ALL)
See the next
page
and press it.
3-colour indica-
tors/Backlight on
the remote con-
trol
z Complete the operation within 25 seconds whilst
selecting the menus.
z If you press the CLEAR button during the operation,
the previous display appears.
O(OFF)
u
(*) indicates default setting.
A
z To cancel the operation, move the M button toward
.
52
01/8/30 5.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
„ Beep sound
„ 3-colour indicators lighting and back-
You can eliminate the confirmation sound that beeps when
you press a button.
light on the remote control
"NORM"
„ Auto play
3-colour indicators
Always flashing
You can make the unit not play automatically when you insert
a playback-only MiniDisc or an accidental erasure protected
MiniDisc.
Backlight on the re- Lit for approx. 10 seconds dur-
mote control
ing operation
-
s
s
„ Auto power save
g
"ALL"
When the unit is used in a place exposed to much vibration,
sound skipping can be decreased by cancelling the auto
power save function. (Battery will drain faster.)
u
3-colour indicators
Always lit
a
Backlight on the re- Lit for approx. 10 seconds dur-
What is auto power save function?
mote control
ing operation
e
During playback, maximum 40 seconds (in stereo) of
musical information is stored. Auto power save function
automatically adjusts the storage time between 5 and 40
seconds to reduce the power consumption. If this func-
tion is cancelled, the storage time cannot be adjusted.
z If this unit is used with the AC adaptor, the storage
time will be 40 seconds regardless of the settings.
z The storage time varies depending on the recording
mode.
(Always lit if used with AC
adaptor)
"OFF"
3-colour indicators
Not lit
Backlight on the re- Not lit
t
mote control
d
„ Digital recording level
"D.L 1"
The digital recording level you set will be kept even after can-
celling recording.
"D.L 2"
Every time you cancel recording, the level will return to [D.L
0dB].
53
01/8/30 5.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Listening through Another System
„ Listening through a stereo system
„ Listening through a car stereo
setm-
e
u
t
F
Notes:
z Adjust the volume of both this portable MD and a car
stereo.
u
z Do not operate this portable MD whilst you drive a car.
It may distract your attention and cause a traffic acci-
dent.
n
z Do not use any car adaptor except for the separately
available AD-CA55X.
z Remove the battery when you power the unit from the
car battery.
z Do not leave the unit in the place of high temperature
such as in a car. If the unit gets hot, the LCD display
will be darkened and hard to read. It will return to nor-
mal when the temperature cools down.
Notes:
d
z It is recommended that the volume level of the
MiniDisc unit be set to maximum when listening
through a stereo system.
z When recording with stereo system, eliminate the con-
firmation sound (page 52). Otherwise, it will also be
recorded.
-
z The recording will be made in the analogue mode.
z Character information will not be recorded.
54
01/8/30 5.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Other Features and Caution
„ Resuming auto play
„ Rechargeable battery
When you stop playback and replay the MiniDisc
without removing it, playback starts from the point
you stopped it.
z A rechargeable nickel-metal hydride battery is the only
kind that can be used. Even if the battery is not used,
you should charge it at least once every three months
because of the special quality of this battery.
z The rechargeable battery can be charged approxi-
mately 300 times.
z When the operating time is reduced to about half the
normal amount of time, even after a full charge is per-
formed, replace the battery with a new one (AD-
N55BT).
Once you remove the MiniDisc, playback starts from
the first track.
z When the battery is charged for the first time or is
charged after not being used for a long period, the
operating time may be shorter than normal. The bat-
tery life will recover with normal use i.e. charging and
discharging.
C
e
r
z To avoid shortening the service life of the battery only
recharge the battery after it has been completely dis-
charged.
z If the rechargeable battery is used in a cold environ-
ment, the operating time will be reduced.
z Do not carry the battery in your pocket or a bag
together with metal objects (keys, coins, jewelry, etc.).
The battery may short out and generate significant
amounts of heat.
z Do not short-circuit the terminals as they will become
very hot and will damage the battery.
The unit provides the following functions when you
use it with the separately available car adaptor (AD-
CA55X) (when the rechargeable or alkaline battery is
removed):
Ref
F
1. When you turn off the engine, the power of this porta-
ble MD also turns off. (It may not work with some types
of cars.)
2. When you restart the engine, playback starts from the
beginning of the stopped track.
r
-
z Do not drop or subject the battery to shock.
z Do not insert objects (metal etc.) into the battery com-
partment of this product or into the rechargeable bat-
tery.
55
01/8/30 6.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Troubleshooting
Many potential "problems" can be resolved by the owner without calling a service technician. If something seems to be wrong
with this product, check the following before calling your authorised SHARP dealer or service centre.
The unit does not turn on.
When the operation buttons are pressed, the unit does
not respond.
z Is the AC adaptor disconnected?
z Is the battery exhausted?
z Is the unit in the hold mode?
z Is the battery being charged?
z Is the battery exhausted?
z Is the unit in the hold mode?
z Has condensation formed inside the unit?
z Is the remote control unit plug or the earphones plug
inserted firmly?
z Is the unit being influenced by mechanical shock or by
static electricity?
s
i
Some sounds are skipped.
No sound is heard from the earphones.
soht
c
z Is the battery exhausted?
l
z Is the volume set too low?
z Is the unit being subjected to excessive vibration?
z Is the remote control unit or the earphones plugged
in?
obu
Rfe
T
The MiniDisc cannot be ejected.
z Are you trying to play a MiniDisc with data on it instead
of a MiniDisc containing music?
z Has the track number or character information been
written on the disc yet?
z Is the unit in the recording or editing mode?
56
01/8/30 6.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
„ If trouble occurs
Recording and editing are impossible.
When this product is subjected to strong external interfer-
ence (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
z Is the MiniDisc protected against accidental erasure?
z Has the recording level been properly adjusted?
z Is the unit connected properly to the other equipment?
z Is the AC adaptor unplugged or did a power failure oc-
cur whilst recording or editing?
If such a problem occurs, do the following:
1. Unplug the AC adaptor from the wall socket.
2. Remove the battery.
3. Leave the unit completely unpowered for approxi-
mately 30 seconds.
4. Plug the AC adaptor back into the wall socket and re-
operate the unit.
z Is the unit in the hold mode?
z Is an optical signal being output from the stereo sys-
tem? Read the operation manual for the stereo sys-
tem.
e
i
„ Moisture condensation
The battery cannot be charged.
z Is the rechargeable battery in the unit?
z Is the terminal dirty?
shoot
r
When the unit has condensation inside, the disc signals
cannot be read, and the unit may not function properly.
l
oub
In the following cases, condensation may form inside the
unit.
Ref
-
Group functions cannot be used with the group-re-
corded MD.
z Shortly after turning on a heater.
z When the unit is placed in a room where there is
excessive steam or moisture.
z When the unit is moved from a cool place to a warm
place.
z TOC information may have been changed with other
equipment.
To remove condensation:
Remove the MiniDisc and leave the unit for approxi-
mately 1 hour. The condensation should evaporate and
the unit will work properly.
57
01/8/30 6.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
MiniDisc System Limitations
The unit may have the following symptoms whilst recording or editing. The unit is not out of order.
SYMPTOM
LIMITATIONS
"D-FULL" or "T-FULL" appears even
though the MiniDisc still has recording
time left.
More than the limited number of tracks (255) cannot be recorded re-
gardless of the recording time. If the MiniDisc is recorded or edited
repeatedly or it has scratches (recording skips scratched parts), you
may not be able to record the maximum number of tracks described
above. If the total number of character information (disc, group, and
track names) exceeds 1,700, the MD cannot be edited.
-
s
o
The remaining recording time does not
increase even though you erased
tracks.
The unit does not count non-recorded portions that last 12 or fewer
seconds to display the remaining recording time. The time may not
increase even if you erase short tracks.
e
mti
The total of the recorded time and the
remaining time does not match the max-
imum recordable time.
One cluster (approximately 2 seconds) is the minimum unit for re-
cording. For example, a 3-second track uses 2 clusters (approxi-
mately 4 seconds). Therefore, the actual recordable time may be
shorter than the displayed time.
e
r
yts
c
(The number of seconds indicates that in the stereo recording mode
(SP). It varies depending on the recording mode.)
Rfe
Combine function does not work.
Sound skips in fast reverse/forward.
A MiniDisc on which recording and editing are repeated may not al-
low the combine function.
i
If one track is divided and recorded in separate places on a repeat-
edly recorded or edited MiniDisc, sound may skip.
A track number is created in the middle
of a track.
A track number may be created if there are scratches or dust on the
MiniDisc.
Even if "LP :" is entered at the top of the
name, "LP :" is not displayed.
If "LP :" is entered at the top of the 2 times/4 times long recorded
track (LP2/LP4), "LP :" will not be displayed. Enter other symbols
than ":" after "LP".
58
01/8/30 6.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Error Messages
ERROR MES-
SAGES
MEANING
ERROR MES-
SAGES
MEANING
BLANK
z Nothing is recorded.
Can'tSTAMP
z Stamp function does not work.
(Replace the disc with a recorded disc.)
z A track is being moved.
(Check the number of tracks.)
busy
Can'tW
z Cannot save the TOC information cor-
rectly to a MiniDisc.
Can'tC
z You tried to record from a copy prohib-
ited MiniDisc.
CH
z You tried to operate whilst charging.
(displayed on
the main unit)
z You tried to record signals other than
music (such as data).
-
D-FULL
z The disc is out of recording space.
e
e
(Record using the analogue cable.)
DEFECT
z The disc is scratched.
Can'tE
Can'tL
z A track cannot be edited.
(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)
(Change the stop position of the track and
then edit it.)
ess
r
z You tried to record or edit the MD
whilst operating the OPEN lever.
orM
Er-MD (**)
z The microprocessor has reported a
system fault and the unit is out of or-
der.
Ref
Can'tP
Can'tR
z Cannot play the MD.
(To have it repaired, go to the distributor
where you purchased the unit.)
z Recording cannot be performed cor-
rectly due to vibration or shock.
Can'tS
Can'tT(*)
Can'tU
z The disc data cannot be read because
the disc is damaged.
Number or symbol appears in (*) position.
(Reload the Minidisc or replace it with an-
other one.)
59
01/8/30 6.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Error Messages (continued)
ERROR MES-
SAGES
MEANING
ERROR MES-
SAGES
MEANING
G-FULL
z The total number of groups exceeds
99.
NoTRACK
PLAYmd
z There is no track to be played.
z You tried to record on a playback-only
(Erase unnecessary groups.)
disc.
HOLD
z The unit is in the hold mode.
POWER ?
z The battery charger is defective.
LoBATT
z The rechargeable or alkaline battery
has run down.
PROTECTED z The write protection tab of a MiniDisc
is set to the protected position.
-
LOCKED
N-FULL
z You removed a MiniDisc whilst record-
ing or editing.
Sorry
z Since a track number is currently be-
ing located or updated, the unit cannot
accept your command.
e
e
(Turn off the power before removing the
MiniDisc.)
(Wait for a while and try the operation
again.)
ess
r
z The number of a disc, group, or track
name exceeds 40.
T Form (*)
z There is an error in the recording sig-
nal.
orM
(Shorten the name.)
(Erase all of the tracks, and then record
again.)
Rfe
NoDISC
noSIG.
z A disc has not been loaded.
z Poor connection of the digital cable.
T-FULL
TEMP!
z There is no space left for recording
character information (track names,
disc names, etc.).
z No output signal comes out from the
connected unit to playback.
z The temperature is too high.
(Use the AC power for the connected
unit.)
(Turn off the power, and wait for a while.)
z The input signal has improper sam-
pling frequency.
Number or symbol appears in (*) position.
60
01/8/30 6.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Maintenance
„ Cleaning
ERROR MES-
SAGES
MEANING
When the unit becomes dirty
Clean it with a soft cloth. When the unit is excessively
dirty, use a soft cloth dampened in water (external sur-
faces only).
Tr. Protect
z The track has been protected from be-
ing erased.
(Edit the track with the device on which it
was recorded.)
?DISC
z A disc which contains data other than
music was played.
(A disc which contains nonmusic data
cannot be played.)
nace-
e
int
?GrForm
z The group recording or the GROUP
RESERVE function cannot be per-
formed.
M
r
(Erase the disc name and retry the same
operation.)
Clean the plugs and the connecting sockets.
If the plugs or sockets are dirty, noise may be heard.
Cleaning will prevent noise.
s
z If the operation is not accepted, "--" may be displayed
on the main unit. For details, refer to the display on the
remote control.
Ref
Caution:
orMes
z Do not use chemicals for cleaning (petrol, paint thin-
ner, etc.). It may damage the cabinet finish.
z Do not apply oil to the inside of the unit. It may cause
malfunctions.
61
01/8/30 6.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Specifications
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification chang-
es for product improvement without prior notice. The performance specification figures indicated are nominal values
of production units. There may be some deviations from these values in individual units.
Power source:
DC 5 V:
AC adaptor (AC 230 - 240 V, 50/60 Hz)
DC 1.5 V:
DC 1.2 V:
DC 1.5 V:
Commercially available, "AA" size (LR6), alkaline battery x 1
Rechargeable Nickel-Metal Hydride battery AD-N55BT x 1
Optional car adaptor, AD-CA55X (for cars with a 12-24 V DC negative
earth electrical system)
Power consumption:
Output power:
7 W (AC adaptor)
RMS: 10 mW (5 mW + 5 mW)
(0.2 % T.H.D.)
e
Charging time:
Approx. 3.0 hours (90 %)
Approx. 5.0 hours (fully charged)
Dimensions:
Weight:
Width: 71.9 mm (2-27/32") Height: 15.7 mm (5/8") Depth: 78.9 mm (3-1/8")
128 g (0.28 lbs.) with rechargeable battery
r
f
Input socket:
Output socket:
Type:
Line/optical digital, microphone (powered by the main unit)
Earphones (impedance: 32 ohms)/remote control unit
Portable MiniDisc recorder
pce
-
Rfe
Signal readout:
Audio channels:
Frequency response:
Rotation speed:
Error correction:
Coding:
Recording method:
Sampling frequency:
Wow and flutter:
Non-contact, 3-beam semiconductor laser pickup
Stereo 2 channels/monaural 1 channel
20 - 20,000 Hz ( 3 dB)
Approx. 400 - 1,350 rpm
ACIRC (Advanced Cross Interleave Reed-Solomon Code)
ATRAC/ATRAC3 (Adaptive TRansform Acoustic Coding), 24-bit computed type
Magnetic modulation overwrite method
44.1 kHz (32 kHz and 48 kHz signals are converted to 44.1 kHz, and then recorded.)
Unmeasurable (less than 0.001 % W. peak)
62
01/8/30 6.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
MD-MT888H
Battery life:
Stereo
2 times long
Continuous
4 times long
Continuous
When using the rechargeable
battery (fully charged) included recording:
with the unit
Continuous
Continuous
Continuous
Continuous
play: Approx.
18.5 hours
play: Approx. recording:
play: Approx. recording:
Approx. 8
hours
13.5 hours
Approx. 11
hours
16 hours
Approx. 14
hours
When using one, commercially Continuous
available, high capacity, "AA" recording:
size (LR6), alkaline battery (The Approx. 9
Continuous
play: Approx. recording:
20 hours
Continuous
Continuous
play: Approx. recording:
25 hours
Continuous
Continuous
play: Approx.
Approx. 14
hours
Approx. 19.5 29 hours
hours
rechargeable battery is in the
unit, discharged.)
hours
s
When using one, commercially Continuous
available, high capacity, "AA" recording:
size (LR6), alkaline battery with Approx. 19
Continuous
play: Approx. recording:
35 hours Approx. 27.5 42.5 hours
Continuous
Continuous
play: Approx. recording:
Continuous
Continuous
play: Approx.
Approx. 36.5 49 hours
the rechargeable battery (fully
charged)
hours
hours
hours
r
n
Input sensitivity:
Output level:
pec
Reference input
level
Input impedance
Specified
output
Maximum
output level
Load imped-
ance
-
Ref
MIC H
MIC L
LINE
0.25 mV
2.5 mV
100 mV
10 k ohms
10 k ohms
20 k ohms
Earphones
LINE
-
5 mW + 5
mW
32 ohms
250 mV (-12
dB)
-
10 k ohms
z The continuous recording time is for analogue inputs when the volume level is set to "VOL 0".
z The continuous play time shows the value when the volume level is set to "VOL 15".
z The above values are the standard values when the unit is charged and used at an ambient temperature of 25°C (77°F).
z The operating time when using an alkaline battery may be different, depending on the type and manufacturer of the battery,
and on the operating temperature.
z The L (LIGHT) is set at “O (OFF)” (see page 52).
63
01/8/30 6.fm
Download from Www.Somanuals.com. All Manuals Search And Download.
TERMS OF GUARANTEE
Subject to the terms listed below, Sharp Electronics (U.K.)
4. This guarantee does not cover any faults or defects
caused by accident, misuse, fair wear and tear, neglect,
tampering with the equipment, or any attempt at ad-
justment or repair other than by a Service Facility ap-
pointed by Sharp.
Ltd. (hereinafter called “the Company”) guarantee to pro-
vide for the repair of, or at its option replace this Sharp
Equipment, or any component thereof, (other than bat-
teries), which is faulty or below standard, as a result of
inferior workmanship or materials.
5. In the unlikely event of a defect occuring, the product
must be returned to the Company’s repair centre with
proof of purchase. A postage paid label and a fault re-
port form are supplied with the product for this purpose.
It is your responsibility to ensure that the packaging is
adequate, and to obtain proof of posting.
Further details of the repair service, which is available
after the guarantee period on a chargeable basis, and
additional report forms and labels can be obtained by
telephoning 0870 738 0000.
The conditions of this guarantee are:
1. The guarantee shall only apply to defects which occur
within one year from the date of purchase, provided
that this equipment is sent to the repair address within
this period.
2. This guarantee covers equipment intended for private
domestic use only. This guarantee does not apply to
equipment used in the course of a business, trade or
profession.
6. No person has any authority to vary the terms or condi-
tions of this guarantee.
3. The guarantee does not cover MiniDiscs or batteries.
7. This guarantee is offered as an additional benefit to
the consumer’s statutory rights and does not affect
these rights in any way.
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester, M40 5BE
SHARP CORPORATION
TINSE0400AWZZ
A0108.YT
MT888H_UK_B
52
01.8.30, 1:58 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|