MODEL
AR-287
AR-337
AR-407
DIGITAL COPYING MACHINE
OPERATION MANUAL
Page
• GETTING STARTED
• MAKING COPIES
• SPECIAL FUNCTIONS
• SUPPLIES
1-1
2-1
3-1
4-1
5-1
• COPIER TROUBLE?
• GENERAL
INFORMATION
6-1
AR-287/AR-337
• OPTIONAL EQUIPMENT 7-1
• KEY OPERATOR’S
GUIDE
8-1
AR-407
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Page
Page
CHAPTER 4
●
INTRODUCTION .................... 2
SUPPLIES
●
USING THIS MANUAL ................ 2
●
PAPER .......................... 4-2
Types and sizes of copy paper ......... 4-2
Loading copy paper ................. 4-2
ADDING TONER ................... 4-5
USED TONER DISPOSAL ............ 4-7
STORAGE OF SUPPLIES ............ 4-8
CHAPTER 1
●
●
●
GETTING STARTED
●
INSTALLATION REQUIREMENTS ...... 1-2
●
CAUTIONS ....................... 1-3
●
POWER ON AND OFF............... 1-5
Power save modes ................. 1-6
INFORMATION FUNCTION ........... 1-7
USING THE TOUCH PANEL .......... 1-8
How to use the touch panel ........... 1-8
Selection of function ................. 1-8
Function setting icons ............... 1-9
CHAPTER 5
COPIER TROUBLE?
●
●
●
MISFEED REMOVAL................ 5-2
●
MAINTENANCE REQUIRED ......... 5-11
●
TROUBLESHOOTING .............. 5-12
CHAPTER 6
CHAPTER 2
MAKING COPIES
GENERAL INFORMATION
●
PART NAMES AND FUNCTIONS ....... 6-2
●
●
●
Exterior .......................... 6-2
Interior .......................... 6-3
Operation panel .................... 6-4
Touch panel (Basic screen) ........... 6-5
AUDITING ACCOUNTS .............. 2-2
USING THE RADF ................. 2-3
COPYING FROM THE DOCUMENT
GLASS .......................... 2-8
REDUCTION/ENLARGEMENT/ZOOM .. 2-11
SPECIAL PAPERS (manual feed) ...... 2-14
Two-sided copying with bypass tray .... 2-15
EXPOSURE ADJUSTMENTS......... 2-16
SORT/GROUP ................... 2-17
JOB MEMORY ................... 2-18
INTERRUPTING A COPY RUN ....... 2-20
●
●
●
USER MAINTENANCE .............. 6-6
●
TOUCH PANEL CONTRAST
ADJUSTMENT .................... 6-7
SPECIFICATIONS .................. 6-8
●
●
●
●
●
CHAPTER 7
OPTIONAL EQUIPMENT
●
SYSTEM CONFIGURATION .......... 7-2
FINISHER (AR-FN1N) ............... 7-3
CHAPTER 3
●
●
SPECIAL FUNCTIONS
FINISHER (AR-FN2) ............... 7-19
LARGE CAPACITY TRAY (AR-LC1N) ... 7-30
STAND/500-SHEET PAPER DRAWER
(AR-DE1N) ...................... 7-34
●
●
●
●
●
●
●
●
XY ZOOM ........................ 3-2
MARGIN SHIFT.................... 3-4
ERASE .......................... 3-6
DUAL PAGE COPYING .............. 3-8
MULTI SHOT .................... 3-10
COVERS ....................... 3-13
TRANSPARENCY FILM WITH
●
●
DUAL TRAY OUTPUT UNIT (AR-TR1) .. 7-37
CHAPTER 8
INSERT SHEETS ................. 3-15
PAMPHLET COPY ................ 3-17
IMAGE EDITING FUNCTIONS ........ 3-20
Job build ........................ 3-20
Centring ........................ 3-22
Repeat copy ..................... 3-24
B/W reverse ..................... 3-27
Binding change ................... 3-29
TEXT STAMP .................... 3-32
Date ........................... 3-32
Select stamp ..................... 3-35
Watermark ...................... 3-38
Page number..................... 3-41
TANDEM COPY .................. 3-44
SETTING REVIEW ................ 3-46
KEY OPERATOR’S GUIDE
●
●
●
KEY OPERATOR CODE NUMBER...... 8-2
Registering the key operator
code number ...................... 8-2
KEY OPERATOR PROGRAMS ........ 8-4
●
Using the key operator programs ....... 8-7
KEY OPERATOR ASSISTANCE CALL .. 8-29
●
●
KEY OPERATOR CODE NUMBER:
●
FACTORY SETTING ............... 8-31
●
●
1
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDITING ACCOUNTS
If this copier has been programmed in the auditing mode, it will not
function until an assigned 5-digit account number has been entered.
★ KEY OPERATOR See page 8-9 for setting the auditing mode.
The initial status of the message display will be:
INTERRUPT
2
5
3
6
1
4
ENTER YOUR ACCOUNT NUMBER. -----
●
●
Enter your account number using the 10-key pad.
As each digit is entered, the dashes in the display will change to
asterisks.
CLEAR
7
9
ROGRAM
P
C
AUDIT CLEA
The following message will appear after the number is entered.
ACCOUNT STATUS: COPIES MADE 000,000
COPIES REMAINING 000,000
“COPIES REMAINING” will appear only if account limit has been
set using a key operator program.
★ KEY OPERATOR
See page 8-12 for account limit settings.
The message, however, will not be displayed when the printer
auditing mode is enabled by the key operator program with the
optional printer expansion kit installed. Then the account limit
setting will be cancelled.
★ KEY OPERATOR
See page 46 of the AR-PB2A operation
manual for the printer auditing mode setting.
●
●
Themessagewillbedisplayedforseveralseconds,thenchange
to the following message.
READY TO COPY.
When a copy run is performed, the following message will
appear.
READY TO COPY.
PRESS [AUDIT CLEAR] WHEN FINISHED.
●
In the interrupt copy mode (see page 2-20), the following
message will appear instead of the message above.
READY TO COPY. WHEN COPYING IS
FINISHED, PRESS [INTERRUPT].
NOTE:
Ifanunassignednumberisentered,themessagedisplaywillshow
“ENTER YOUR ACCOUNT NUMBER.-----”, indicating that the
number was not accepted.
When the key operator program of account number security has
been set:
If an unassigned number is entered three successive times, the
copier will not accept another number for one minute, and the
following message will appear.
PLEASE SEE YOUR KEY OPERATOR FOR
ASSISTANCE.
★ KEY OPERATOR
See page 8-13 for account number
security.
2-2
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1
GETTING STARTED
This chapter describes the basic information on the use of this copier.
Page
●
INSTALLATION REQUIREMENTS ..................... 1-2
●
CAUTIONS ...................................... 1-3
●
POWER ON AND OFF .............................. 1-5
Power save modes ................................. 1-6
●
INFORMATION FUNCTION .......................... 1-7
●
USINGTHE TOUCH PANEL .......................... 1-8
How to use the touch panel ........................... 1-8
Selection of function ................................ 1-8
Function setting icons ............................... 1-9
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION REQUIREMENTS
Toensuresafetyandpropermachineperformance,pleasenotethefollowing
before initial installation and whenever the machine is to be relocated.
1. The copier should be installed near an accessible power outlet for easy
connection.
2. Be sure to connect the power cord only to a power outlet that meets the
specified voltage and current requirements.
Also make certain the outlet is properly grounded.
●
For this copier’s power supply requirements, see the name plate
located on the left hand side at the rear corner of the copier.
3. Do not install the machine where it is:
●
damp or humid,
●
exposed to direct sunlight,
●
extremely dusty,
●
poorly ventilated,
●
subjecttoextremetemperatureorhumiditychanges(e.g., nearanair
conditioner or heater).
4. Since a hard disk drive is built into this copier, place the copier on a firm,
level surface. Choose an area which is not subject to any vibration.
5. Besuretoallowtherequiredspacearoundthemachineforservicingand
proper ventilation.
30 cm
(11-13/16")
60 cm
(23-5/8")
30 cm
(11-13/16")
60 cm
(23-5/8")
1-2
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS
1. Do not touch the photoconductive drum. Scratches or
smudges on the drum will cause dirty copies.
2. The fusing unit is extremely hot. Exercise care in this area.
Fusing unit
3. Since a hard disk drive is built into the copier, be sure to turn the
power switch to the “OFF” position when moving the copier. Take
care not to subject the copier to any vibration or shock.
Photoconductive
drum
4. Do not look directly at the light source. Doing so may
damage your eyes.
5. Four installation adjusters are provided on the optional
stand/500-sheet paper drawer.
When moving the machine with the optional stand/
500-sheet paper drawer, be sure to raise the installation
adjusters.Aftermovingthemachine,lowerthefourinstallation
adjusters until they reach the floor and lock the two casters
at the front of the copier.
Caster
Release
Lock
Release
Lock
Adjuster
6. When copying is interrupted (for example, because the
INTERRUPT function has been used, paper or toner has run out,
a misfeed has occurred, etc.), this copier will store the image
data of the originals read prior to the interruption. If copying of
secret documents is interrupted due to the above reasons, be
sure to either resume the interrupted copying by pressing the
START ( ) key, or clear the image data by pressing the CLEAR
CA
ALL ( ) key after the interrupt copying is completed or the
trouble is cleared, because the stored data may be printed by
other operators.
Cautions on laser
+10 nm
-15 nm
Wave length
785 nm
North America: (2.274 µs ±2.3 ns)/7 mm
Europe: (3.025 µs ±3.0 ns)/7 mm
Pulse times
Output power
0.24 - 0.60 mW
At the production line, the output power of
the scanner unit is adjusted to 0.6 MILLI-
WATT PLUS 8 PCTS and is maintained
constantbytheoperationoftheAutomatic
Power Control (APC).
Caution
This product contains a low power laser device. To
ensure continued safety do not remove any cover or
attempt to gain access to the inside of the product. Refer
all servicing to qualified personnel.
1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS
CAUTION
VAROITUS!
LAITTEEN KÄYTTÄMINEN
MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA
TAVALLA SAATTAA ALTISTAA
KÄYTTÄJÄN
TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE
NÄKYMÄTTÖMÄLLE
For Europe:
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED. AVOID EXPOSURE
TO BEAM.
CLASS 1 LASER PRODUCT
VORSICHT
UNSICHTBARE
LASER KLASSE 1
LASERSTRAHLUNG WENN
ABDECKUNG GEÖFFNET UND
SICHERHEITSVERRIEGELUNG
ÜBERBRÜCKT. NICHT DEM
STRAHL AUSSETZEN.
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
LASERSÄTEILYLLE.
VARNING
OM APPARATEN ANVÄNDS PÅ
ANNAT SÄTT ÄN I DENNA
BRUKSANVISNING
ADVARSEL
USYNLIG LASERSTRÅLNING
VED ÅBNING, NÅR
SIKKERHEDSBRYDERE ER UDE
AF FUNKTION. UNDGÅ
UDSAETTELSE FOR
SPECIFICERATS, KAN
ANVÄNDAREN UTSÄTTAS FÖR
OSYNLIG LASERSTRÅLNING,
SOM ÖVERSKRIDER GRÄNSEN
FÖR LASERKLASS 1.
STRÅLNING.
CLASS 1
LASER PRODUCT
LASER KLASSE 1
1-4
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER ON AND OFF
The power switch is located on the left side of the copier. When the
power switch is turned to the “ON” position, the message “WARMING
UP. PLEASE WAIT.” will appear in the message display. Warming
uptakesabout65secondsfortheAR-287/337andabout75seconds
for the AR-407. Once the copier is ready, the message display will
change to “READY TO COPY.”, and the START ( ) key indicator will
light up, indicating that copying is possible.
Power on
Ifthecopierhasbeenprogrammedintheauditingmode,themessage
“ENTERYOURACCOUNTNUMBER.-----”willappearafterwarming
up. Once a valid account number has been entered, copying will
become possible.
Power off
1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER ON AND OFF
Power save modes
The copier has two power save modes to reduce overall power
consumptionandtherebyreducethecostofoperationandtoconserve
natural resources to help reduce environmental pollution. The two
power save modes are preheat mode and auto power shut-off mode.
★ KEY OPERATOR
The preheat activation time and the auto power shut-off time have been
preset at the factory to 15 min. for preheat mode and 60 min. for auto
powershut-offmode.Thesetimescanbechangedasdescribedinthekey
operator’s guide section. It is suggested that you set appropriate times
according to the actual usage of the copier.
Auto power shut-off mode
If the auto power shut-off mode is enabled, the copier will
automatically turn off the power once a programmed length of time
has elapsed without any copier operation after the last copy of a run
is made or the power is first turned on. The power switch will
automatically be turned to the “OFF” position.
To turn the power back on, simply turn the power switch to the “ON”
position.
★ KEY OPERATOR See page 8-21 for setting the auto power shut-off
timer. See page 8-27 for enabling or disabling the auto power shut-off
mode.
Preheat mode
The copier will enter the mode once the set time has elapsed without
any copier operation after the last copy of a run is made or power is
turned on.
When the copier enters the preheat mode, the message “PREHEAT
MODE. PLACE ORIGINALS.” will appear.
In this condition, the fuser in the copier is maintained at a lower heat
level thereby saving power. The preheat level is, however, high
enough to allow the copier to come to a ready condition or begin
copying approximately 30 seconds after any key input is made.
To copy from the preheat mode, make desired copier selections and
press the START ( ) key using the normal copying procedure.
★ KEY OPERATOR Seepage8-22forinformationonsettingthepreheat
mode.
The ENERGY STAR® guidelines are applied
to the products only in Europe, Australia
andNewZealand.Theproductsthatmeet
theENERGY STAR® guidelinescarrythelogo
shown above. The products without the
logo may not meet the ENERGY STAR®
guidelines.
1-6
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION FUNCTION
The information function provides a quick reference guide to the use
of the various features and functions of this copier. The information
mode can be entered when the copier is in the standby mode.
Press the INFORMATION ( ) key in the standby mode.
1
2
3
●
The screen for the information categories will appear.
4
Select the “COPIER” key to display the first screen of
the copier feature items.
EXIT
INFORMATION
SELECT INFORMATION.
●
If the toner supply is not low, this screen is not displayed.
Proceed to step 3.
COPIER
ADDING NER
INSTRUCONS
Select the feature you would like to know about by
pressing a copier feature item key on the touch panel.
EXIT
INFORMATION
MAKING 2-SIDED COPIES (2-SIDED COPY)
●
Ifthefeatureyouwouldliketoknowaboutisnotdisplayedonthe
SORTING COPIES TO SETS OR STAPLING
FINISHED SETS OCOPIES (OUTPUT)
1/5
touch panel, press the scroll (
the feature is displayed.
) key on the touch panel until
USING THE DOCUMFEEDER
(
DOCUMENT FE
●
If a copier feature item key is pressed, the description for that
feature will appear. Use the scroll ( ) key to display additional
REDUCTION/EM
(COPY RATIO
STORING FREOB PROGRAMS
(PROGRAM)
informationuntilallinformationforthatfeaturehasbeendisplayed.
●
●
To return to the copier feature item screen, press the “INDEX”
key.
To exit the INFORMATION mode, press the “EXIT” key on the
touch panel.
1-7
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE TOUCH PANEL
How to use the touch panel
You can set or cancel a function displayed on the touch
READY TO COPY.
panel by pressing (touching) a key with a finger. The touch
key operation can be confirmed with a beep tone (and
highlighted display).
1. A4
2. A3
★ KEY OPERATOR Forthe beep tone to be heard, the beep tone must be
enabled by a key operator program. See page 8-27.
AUTO
100%
COPY RATIO
EXPOSURE
Ifanykeysaredisplayedgray, thekeyshavebeendisabled.
If you press these keys, two short beeps will be sounded.
RECALL
STOELETE
Selection of function
To register the selected settings for a function, press the
“OK” key on the setting screen. The settings indicated by
ahighlighteddisplaywillberegisteredasaselectedfunction.
OK
OK
CANCEL
ERASE
~20)
1
m
EDGE ERASE
CENTRE ERASE
EDGE+CENTRE
ERASE
Some special functions can be selected by pressing the
relevant keys on the SPECIAL MODES screen (page 3-4) or
on the IMAGE EDIT menu (page 3-21) to highlight the keys.
To cancel these functions, press the relevant keys again to
return the keys to the normal display. These functions are:
Dual page copying, Centring, B/W reverse, and Binding
change.
READY TO COPY.
SPECIAL MODES
OK
DUAL PAGE
MARGIN SHIFT
MULTI SHOT
ERASE
COVERS
CY
TRANSPCY
INS
TEXT P
PAMPHLET COPY
IMAGE EDIT
AUTO
AUTO A4
1
EXPOSURE
PAPER SELECT
1-8
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE TOUCH PANEL
Function setting icons
Selected special functions are indicated with their icons on
the basic screen. The setting screen for a selected function
can be easily called by pressing its icon.
READY TO COPY.
If multiple special functions are selected, up to six icons
will be displayed.
1. A4
2. A3
READY TO COPY.
The function setting icons are listed below. The content of
the icons indicated by *1 will change depending upon the
particular settings for these functions.
OK
CANCEL
OK
ERASE
(0~20)
10
mm
EDGE ERASE
CENTRE ERASE
EDGE+CENTRE
ERASE
*1 Margin shift (p.3-4)
*1 Erase (p.3-6)
*1 Repeat copy (p.3-24)
B/W reverse (p.3-27)
Binding change (p.3-29)
Date (p.3-32)
Dual page copying (p.3-8)
*1 Multi shot (p.3-10)
*1 Covers (p.3-13)
Select stamp (p.3-35)
*1 Transparency film with insert sheets
(p.3-15)
Watermark (p.3-38)
Page number (p.3-41)
Tandem copy (p.3-44)
Pamphlet copy (p.3-17)
Job build (p.3-20)
Centring (p.3-22)
1-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2
MAKING COPIES
This chapter describes the basic copying functions such as normal
copying, reduction/enlargement, and exposure adjustments.
Page
●
AUDITING ACCOUNTS ............................. 2-2
●
USINGTHE RADF ................................. 2-3
●
COPYING FROM THE DOCUMENT GLASS .............. 2-8
●
REDUCTION/ENLARGEMENT/ZOOM ................. 2-11
●
SPECIAL PAPERS (manual feed) .................... 2-14
Two sided copying with bypass tray .................... 2-15
●
EXPOSURE ADJUSTMENTS ........................ 2-16
●
SORT/GROUP ................................... 2-17
●
JOB MEMORY ................................... 2-18
●
INTERRUPTING A COPY RUN ....................... 2-20
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDITING ACCOUNTS
If this copier has been programmed in the auditing mode, it will not
function until an assigned 5-digit account number has been entered.
★ KEY OPERATOR See page 8-9 for setting the auditing mode.
The initial status of the message display will be:
INTERRUPT
2
5
3
6
1
4
ENTER YOUR ACCOUNT NUMBER. -----
●
●
Enter your account number using the 10-key pad.
As each digit is entered, the dashes in the display will change to
asterisks.
CLEAR
7
9
ROGRAM
P
C
AUDIT CLEA
The following message will appear after the number is entered.
ACCOUNT STATUS: COPIES MADE 000,000
COPIES REMAINING 000,000
“COPIES REMAINING” will appear only if account limit has been
set using a key operator program.
★ KEY OPERATOR
See page 8-12 for account limit settings.
The message, however, will not be displayed when the printer
auditing mode is enabled by the key operator program with the
optional printer expansion kit installed. Then the account limit
setting will be cancelled.
★ KEY OPERATOR
See page 46 of the AR-PB2A operation
manual for the printer auditing mode setting.
●
●
Themessagewillbedisplayedforseveralseconds,thenchange
to the following message.
READY TO COPY.
When a copy run is performed, the following message will
appear.
READY TO COPY.
PRESS [AUDIT CLEAR] WHEN FINISHED.
(In some regions, [ACC.#-C] is displayed in place of [AUDIT
CLEAR].)
●
In the interrupt copy mode (see page 2-20), the following
message will appear instead of the message above.
READY TO COPY. WHEN COPYING IS
FINISHED, PRESS [INTERRUPT].
NOTE:
Ifanunassignednumberisentered,themessagedisplaywillshow
“ENTER YOUR ACCOUNT NUMBER.-----”, indicating that the
number was not accepted.
When the key operator program of account number security has
been set:
If an unassigned number is entered three successive times, the
copier will not accept another number for one minute, and the
following message will appear.
PLEASE SEE YOUR KEY OPERATOR FOR
ASSISTANCE.
★ KEY OPERATOR
See page 8-13 for account number
security.
2-2
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE RADF
●
The RADF (reversing automatic document feeder) will
handle multiple originals.
Duplex copying will not work when a non-standard
sized paper (or 5-1/2" x 8-1/2" paper) is used.
If the orientation of the originals does not match that
of the copy paper when both the originals and copy
paperareofstandardsizesandtheautopaperselect
mode or automatic copy ratio select mode is on, the
image of the originals will be automatically rotated to
match the copy paper. However, if enlargement
copyingontoapapersizelargerthanA4(8-1/2"x11")
is performed, the image will not be rotated.
Image loss (max. 5mm (13/64")) can occur along the
leading and trailing edges of the copies. Also image
loss (max. 5mm (13/64") in total) can occur along the
other edges of the copies.
The RADF can handle a maximum of 50 originals of
A5 to A4 (5-1/2" x 8-1/2" to 8-1/2" x 11") sizes and 30
originals of B4 to A3 (8-1/2" x 14" to 11" x 17") sizes.
2-sided to 1-sided copying and 2-sided to 2-sided
copying can be performed in these models.
The originals must be set face up in the document
feeder tray.
●
●
Before loading originals into the document feeder
tray, be sure to remove any staples or paper clips
from them.
●
Damaged or crumpled originals or originals which
have been folded may misfeed in the RADF or cause
incorrectsizedetection.Itisrecommendedthatthese
becopiedfromthedocumentglassandthecopiesbe
used as original documents.
●
●
●
●
When feeding originals which have closely spaced
binding holes punched along an edge, place the
originalssothatthepunchededgeispositionedtothe
right or along the side guides.
Specialoriginalssuchastransparencyfilmandtracing
papershouldnotbefedfromtheRADF,butshouldbe
placed on the document glass.
●
●
●
Different size originals with the same width can be
placedinthedocumentfeedertrayandautomatically
copied onto copy paper of their respective sizes.
The automatic copy ratio selection will not function in
this case.
Stream feeding mode
If the stream feeding mode has been enabled using a key operator
program,themessage“NEWLYPLACEDORIGINALSWILLBEFED
AND COPIED AUTOMATICALLY.” will appear and the original feed
indicator will continue to blink for approximately 5 seconds after
feedingofalloriginalsiscompleted.Whilethismessageisdisplayed,
any new originals placed in the document feeder tray will be fed and
copied automatically.
★ KEY OPERATOR See page 8-17 for information on setting the
stream feeding mode.
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE RADF
1-sided copies of 1-sided originals
1-sided copies of 1-sided originals
Adjusttheoriginalguidestothesizeoftheoriginalsand
set the originals face up in the document feeder tray.
1
●
The original size will be indicated on the touch panel, and the
papertraywiththecorrespondingpapersizewillbeautomatically
selected.
●
Be sure to remove any original from the document glass before
setting the originals in the document feeder tray. If an original is
left on the document glass, the original reminder indicator will
blink. Removetheoriginalfromthedocumentglassinthiscase.
If copy paper of the required size is not installed in any of the
trays, the following message will appear.
●
LOAD
PAPER.
If a tray of the required size is not installed, use the bypass tray
andpressthe“PAPERSELECT”keyonthetouchpaneltoselect
the bypass tray.
●
To copy onto a different size paper, use the “PAPER SELECT”
key to make the selection.
Ensure that the 1-sided to 1-sided copying mode is
selected on the touch panel.
READY TO COPY. (DOCUMENT FEEDER MODE)
2
3
4
ORIGINAL A4
●
When no icon is displayed in the area indicated in the illustration
(
), the 1-sided to 1-sided copying mode is selected.
1. A4
2. A3
●
If the 1-sided to 1-sided mode is not selected, press the
2-SIDED COPY key and then press the 1-sided to 1-sided key
(
) on the touch panel. Press the “OK” key to return to the
AUTO
AUTO
A4
100%
basic screen.
EXPOSURE
PAPER SELECT
COPY RATIO
Use the 10-key pad to enter the desired number of
copies.
INTERRUPT
2
5
8
0
3
6
1
4
●
The number will be shown in the copy quantity display of the
touch panel.
●
●
C
UsetheCLEAR( )keytocancelanentryifamistakehasbeen
made.
CLEAR
7
9
PROGRAM
P
Ifyousetamultiplenumberofcopies,thecopieswillbedelivered
collated.TodeliverintheGROUPmode,presstheOUTPUTkey
and then select “GROUP” on the touch panel. See page 2-17.
C
AUDIT CLEAR
INTERRUPT
Press the START ( ) key.
CLEAR ALL
●
CA
To cancel a copy run, press the CLEAR ALL ( ) key. Copying
willstopandtheRADFwilloutputanyoriginalswhichhavebeen
fed. Also, the number in the copy quantity display will be reset to
0.
CA
START
CLEAR
C
2-4
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE RADF
2-sided copies from 1-sided originals
Adjusttheoriginalguidestothesizeoftheoriginalsand
set the originals face up in the document feeder tray.
1
2
3
4
Maximum height
line
Press the 2-SIDED COPY key.
READY TO COPY.(DOCUMENT FEEDER MODE)
Press the
key on the touch panel.
OK
2-SIDED COPY
AUTO
AUTO A4
100%
COPY RATIO
EXPOSURE
SELECT
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
Press the “OK” key.
OK
AUTO
AUTO A4
Enter the desired number of copies.
Press the START ( ) key.
CLEAR ALL
INT
2
5
8
0
3
1
4
5
6
CA
6
●
To cancel a copy run during duplex copying, press the CLEAR
START
CA
ALL ( ) key.
7
9
PROGRAM
P
AUDIT CLEAR
2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE RADF
2-sided copies from 2-sided originals
Adjusttheoriginalguidestothesizeoftheoriginalsand
set the originals face up in the document feeder tray.
1
Maximum height
line
Press the 2-SIDED COPY key.
2
3
4
OK
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
Press the
key on the touch panel.
AUTO
AUTO A4
100%
COPY RATIO
EXPOSURE
PAPER SELE
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
Press the “OK” key.
OK
AUTO
AUTO A4
COP
EXPOSURE
PAPER SELECT
Enter the desired number of copies.
Press the START ( ) key.
CLEAR ALL
INT
2
5
8
0
3
1
4
5
6
CA
6
START
●
To cancel a copy run during duplex copying, press the CLEAR
CA
7
9
PROGRAM
P
ALL ( ) key.
AUDIT CLEAR
2-6
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE RADF
1-sided copies from 2-sided originals
Adjusttheoriginalguidestothesizeoftheoriginalsand
set the originals face up in the document feeder tray.
1
2
3
4
Maximum height
line
Press the 2-SIDED COPY key.
READY TO COPY.(DOCUMENT FEEDER MODE)
Press the
key on the touch panel.
OK
2-SIDED COPY
AUTO
AUTO A4
10%
COPIO
EXPOSURE
PAPER SELECT
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
Press the “OK” key.
OK
AUTO
AUTO A4
COP
EXPOSURE
PAPER SELECT
Enter the desired number of copies.
CLEAR ALL
INT
2
5
8
0
3
1
4
5
6
CA
Press the START ( ) key.
6
START
●
CA
To cancel a copy run, press the CLEAR ALL ( ) key. Copying
willstopandtheRADFwilloutputanyoriginalswhichhavebeen
fed. Also, the number in the copy quantity display will be reset to
0.
7
9
PROGRAM
P
AUDIT CLEAR
2-7
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM THE DOCUMENT GLASS
●
Use the document glass for copying single originals,
bounddocuments,andotheroriginalsthatcannotbeset
in the RADF.
If the orientation of the original does not match that
of the copy paper when both the original and copy
paper are of standard sizes and the auto paper
select mode or automatic copy ratio select mode is
on, the image of the original will be automatically
rotated to match the copy paper. However, if
enlargement copying onto a paper size larger than
A4(8-1/2" x 11") is performed, the image will not be
rotated.
●
Only 1-sided to 1-sided and 1-sided to 2-sided
copying can be selected when copying from the
document glass.
Duplex copying will not work when a non-standard
●
sized paper (or 5-1/2" x 8-1/2" paper) is used.
2-sided to 2-sided or 2-sided to 1-sided copying
●
●
cannot be selected when copying from the
document glass. These operations can, however,
be performed simply by turning over the original
manually.
Image void (max. 5 mm (13/64")) can occur along
the leading and trailing edges of the copies. Also
image void (max. 5 mm (13/64") in total) can occur
along the other edges of the copies.
1-sided copies of 1-sided originals
Open the document feeder cover and place an original
face down on the document glass, using the centring
scale to position it.
Original size detector
1
●
Whencopyingmulti-pagedocuments,copyfromthelastpageto
the first page.
NOTE:
Do not place objects under the original size detector, because they
may damage it.
Centring scale
Close the document feeder cover.
●
Theoriginalsizewillbeindicatedonthetouchpanel,andthepaper
2
3
traywiththecorrespondingpapersizewillbeautomaticallyselected.
Ensure that the 1-sided to 1-sided copying mode is
selected on the touch panel.
READY TO COPY.
A4
ORIGINAL
●
When no icon is displayed in the area indicated in the illustration
1. A4
(
), the 1-sided to 1-sided copying mode is selected.
2. A3
●
If the 1-sided to 1-sided mode is not selected, press the
2-SIDED COPY key and then press the 1-sided to 1-sided key
(
) on the touch panel. Press the “OK” key to return to the
AUTO
AUTO
A4
100%
COPY RATIO
EXPOSURE
PAPER SELECT
basic screen.
Use the 10-key pad to enter the desired number of
copies.
INTERRUPT
2
5
8
0
3
6
1
4
4
●
The number will be shown in the copy quantity display of the
touch panel.
●
A single copy can be made with the initial setting, i.e., when “0”
is displayed.
CLEAR
7
9
PROGRAM
P
●
UsetheCLEAR( )keytocancelanentryifamistakeismade.
C
C
AUDIT CLEAR
●
If you set a multiple number of copies, the copies will not be
delivered collated in the default setting. To deliver in the SORT
mode, press the OUTPUT key and then select the SORT mode
on the touch panel. See page 2-17.
2-8
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM THE DOCUMENT GLASS
INTERRUPT
CLEAR ALL
Press the START ( ) key.
●
IfthecopierisintheGROUPmode(thesorticonisnotdisplayed
5
6
CA
onthetouchpanel),copyingwillstartandthenumberinthecopy
quantity display will decrease by 1 each time a copy is made. To
repeat the same copy sequence with a different original, simply
replace the original and press the START ( ) key.
START
CLEAR
●
If the copier is in the SORT mode, the original will be scanned
C
when the START ( ) key is pressed but copying will not begin.
Proceed to step 6.
To cancel a copy run, press the CLEAR ALL ( ) key. Copying
●
CA
willstopandthenumberinthecopyquantitydisplaywillbereset
to 0.
3
Remove the first original with the next original after the
START ( ) key indicator lights up, and then press the
START ( ) key. Repeat this step until all the originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
READ-END
●
Copying will start after the “READ-END” key is pressed.
AUTO
EXPOSURE
AUTO A4
PAPER SELECT
100%
ATIO
●
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
2-sided copies from 1-sided originals
Set the last page of the document onto the document
glass, using the centring scale to position it.
Original size detector
1
NOTE:
Do not place objects under the original size detector, because they
may damage it.
Close the document feeder cover.
●
Theoriginalsizewillbeindicatedonthetouchpanel,andthepaper
traywiththecorrespondingpapersizewillbeautomaticallyselected.
2
3
Centring scale
Press the 2-SIDED COPY key.
2-9
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM THE DOCUMENT GLASS
READY TO COPY.
2-SIDED COPY
Press the
key on the touch panel.
4
5
6
OK
AUTO
AUTO A4
100%
COPY RATIO
EXPOSURE
R SELECT
READY TO COPY.
2-SIDED COPY
Press the “OK” key.
OK
AUTO
AUTO A4
Use the 10-key pad to enter the desired number of
copies.
CLEAR ALL
INT
2
5
8
0
3
1
4
CA
●
The number will be shown in the copy quantity display.
6
●
C
UsetheCLEAR( )keytocancelanentryifamistakeismade.
START
Press the START ( ) key.
7
9
PROGRAM
P
●
The original will be scanned each time the START ( ) key is
7
8
AUDIT CLEAR
pressed, but copying will not begin yet.
Remove the first original and replace it with the next
original after the START ( ) key indicator lights up, and
then press the START ( ) key.
●
Copy from the last page to the first page.
Repeat step 8 until all originals have been scanned.
Then, press the “READ-END” key on the touch panel.
3
9
●
Copying will start after the “READ-END” key is pressed.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
READ-END
●
CA
To cancel a copy run, press the CLEAR ALL ( ) key.
AUTO
AUTO A4
PAPER SELECT
100%
TIO
EXPOSURE
2-10
Download from Www.Somanuals.com. All Manuals Search And Download.
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either
automatically with the “AUTO IMAGE” key or manually with the
reduction, enlargement or “ZOOM” keys on the touch panel. The
zoom function enables precise copy ratio selection from 25% to
400% (for the AR-407) or from 25% to 800% (for the AR-287 and AR-
337) in 1% increments.
★ KEY OPERATOR A total of four extra preset copy ratios, two each
for reduction and enlargement, can be added. See page 8-15.
●
The allowable copy ratio range is limited in the following conditions.
PHOTO MODE/MULTI SHOT/PAMPHLET COPY/REPEAT COPY:
25% to 400%
Automatic selection
Place the original in the document feeder tray or on the
document glass.
1
●
The original size will be detected and indicated on the touch
panel.
Press the “PAPER SELECT” key on the touch panel and
select the paper tray with the desired paper size.
READY TO COPY.
2
1. A4
2. A3
AUTO
100%
COPY RATIO
EXPOSURE
Press the “AUTO IMAGE” key on the touch panel.
.
.
A4
3
●
The best reduction or enlargement ratio for the selected paper
A3
size will be automatically set and displayed on the touch panel.
●
If the originals and the selected copy paper are not facing the
AUTO IMAGE
same direction, the image will be automatically rotated to match
the copy paper. However, if enlargement copying onto a paper
sizelargerthanA4(8-1/2"x11")isperformed, theimagewillnot
be rotated.
A3
10%
COPRATIO
PER SELECT
NOTE:
This feature will not work when original or copy paper is of non-
standard size.
CLEAR ALL
INT
2
3
1
4
CA
Enter the desired number of copies.
5
8
0
6
4
5
START
7
9
PROGRAM
P
Press the START ( ) key.
AUDIT CLEAR
●
Tocanceltheautomaticreduction/enlargementmode,pressthe
“AUTO IMAGE” key again.
2-11
Download from Www.Somanuals.com. All Manuals Search And Download.
REDUCTION/ENLARGEMENT/ZOOM
Manual selection
Place the original in the document feeder tray or on the
document glass.
1
2
3
Press the “COPY RATIO” key on the touch panel.
1. A4
2. A3
AUTO A4
100%
COPY RATIO
PAPER SELECT
MENU 1
MENU
1
2
Usethe
keytoselectmenu1ormenu2forcopy
READY TO COPY.
ratio selection.
OK
%
100
Menu 1
A4 B5
B5 A4
86%
115%
122%
141%
A3 B4
B4 A3
ZOOM
B5 A5
A5 B5
A4 B4
A5 A4
A4 A3
A. Preset reduction copy ratios are: 86%, 81%, and 70%
(77% and 64%).
81%
B4 A4
A4 A5
100%
70%
A3 A4
B. Presetenlargementcopyratiosare:115%, 122%, and
XY ZOOM
MENU
1
2
AUTO IMAGE
141% (121% and 129%).
AUTO
AUTO A4
100%
COPY RATIO
Menu 2
EXPOSURE
PAPER SELECT
A. Preset reduction copy ratios are: 50% and 25%
(95%, 50%, and 25%).
B. Preset enlargement copy ratios are: 200%, 400% and
800% (141%, 200%, 400%, and 800%) (800% for the
AR-287 and AR-337 only).
MENU 2 (AR-407)
READY TO COPY.
OK
200%
%
100
50%
ZOOM
Use the reduction, enlargement, and “ZOOM” keys on
the touch panel to set the desired copy ratio.
Zoom ratios: Any ratio from 25% to 400% (800% for the
AR-287 and AR-337) can be set in 1% increments.
25%
400%
AUTO IMAGE
100%
COPY RATIO
4
100%
XY ZOOM
MENU
1
2
AUTO
AUTO A4
●
Press a reduction or enlargement key to set the approximate
EXPOSURE
PAPER SELECT
ratio,thenpressthe
to increase the ratio.
To set the horizontal and vertical copy ratios separately, use the
XY ZOOM feature. See page 3-2.
To reset the copy ratio to 100%, press the “100%” key on the
touch panel.
The message “IMAGE IS LARGER THAN THE COPY PAPER.”
may appear, indicating that the selected copy ratio is too large
for the copy paper size. However, if you press the START (
key, a copy will be made.
Theimageoftheoriginalmayberotatedtomatchthecopypaper
orientation if the original and copy paper are of standard sizes.
keytodecreasetheratioorthe
key
MENU 2 (AR-287/AR-337)
●
●
●
READY TO COPY.
OK
200%
%
100
50%
ZOOM
25%
400% 800%
AUTO IMAGE
100%
)
XY ZOOM
MENU
1
2
AUTO
AUTO A4
100%
COPY RATIO
●
EXPOSURE
PAPER SELECT
2-12
Download from Www.Somanuals.com. All Manuals Search And Download.
REDUCTION/ENLARGEMENT/ZOOM
Press the “OK” key.
READY TO COPY.
A4 B5
5
6
7
8
OK
%
141
A4
86%
115%
122%
141
A3 B4
A3
ZOOM
B5 A5
B5
B4
81%
B4 A4
A4 A5
100%
70%
A3 A4
XY ZOOM
MENU
1
2
A
AUTO
AUTO A3
CO
EXPOSURE
PAPER SELECT
Use the “PAPER SELECT” key to select the paper tray
with the desired paper size.
READY TO COPY.
1. A4
●
If the AUTO PAPER SELECT mode is on, the appropriate copy
2. A3
paper size will have been automatically selected based on the
original size and selected copy ratio.
●
If a tray of the required size is not installed, use the bypass tray
and press the “PAPER SELECT” key to select the bypass tray.
1
AUTO
AUTO 8/ 11
2
141%
COPY RATIO
EXPOSURE
PAPER SELECT
Enter the desired number of copies.
INTERRUPT
2
5
8
0
3
6
1
4
CLEAR
7
9
PROGRAM
P
C
AUDIT CLEAR
INTERRUPT
CLEAR ALL
Press the START ( ) key.
CA
START
CLEAR
C
2-13
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PAPERS (manual feed)
The bypass tray is used to copy onto transparency film, labels,
tracing paper, and other special purpose papers. Up to 50 sheets of
standard copy paper can be set in the bypass tray.
●
Automatic duplex copying will not work when a non-standard sized
paper is used. If a duplex copying mode is selected and a non-
standard sized paper is used from the bypass tray, the
corresponding one-sided mode will be selected automatically
when the START ( ) key is pressed.
Place the original in the document feeder tray or on the
document glass.
1
Open the bypass tray.
2
Set the bypass tray guides to the width of the copy
paper.
3
●
Be sure to extend the tray when feeding A4R, B4 or A3
(8-1/2" x 11"R, 8-1/2" x 14" or 11" x 17") sized paper.
When feeding A3 (11" x 17") sized paper, pull out the metallic
support.
Insert the copy paper all the way into the bypass tray.
●
Labels, tracing paper, and other special purpose papers other
4
than SHARP recommended transparency film must be fed
individually. Multiple sheets of SHARP recommended
transparency film can be loaded in the bypass tray.
●
Up to 50 sheets of standard copy paper measuring from
A6 to A3 (5-1/2" x 8-1/2" to 11" x 17") can be loaded into the
bypass tray.
●
For automatic two-sided copying of A5 paper, position the side
guides against the copy paper’s longest side.
●
A6sizepapermustbefednarrowsideintothefeedslotandmust
be fed individually.
CLEAR ALL
●
When adding paper, first remove remaining paper, combine it
with the paper to be added and then reload as a single stack.
CA
A4
A4R
A3
START
Press the “PAPER SELECT” key on the touch panel and
then select the bypass tray.
5
6
7
TO A4
Set the number of copies.
R SELECT
Press the START ( ) key.
2-14
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PAPERS (manual feed)
Two-sided copying with bypass tray
Two-sided copies can be made manually using the bypass tray,
when the heavy paper which is out of spec. for duplex module is
used.
Place the first original face down on the document glass
and make a copy.
1
2
3
●
Thefirstsideofthecopycanbemadeusinganyofthepaperfeed
1 2
stations.
1 2
3 4
3 4
Replace the first original with the second original and
close the document cover.
●
Makesurethefirstandsecondoriginalsareorientedinthesame
way on the document glass.
●
Thefirstandsecondoriginalscanbesetinthedocumentfeeder
tray. However, they must be set individually.
Turnthefirstcopyoverwithoutchangingitstop-bottom
orientation and place it into the bypass tray.
●
Be sure to feed the copies one sheet at a time.
1 2
Press the “PAPER SELECT” key and select the bypass
tray.
CLEAR ALL
4
5
CA
A4
A4
A3
START
Press the START ( ) key.
O
A4
R SELECT
2-15
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPOSURE ADJUSTMENTS
This copier has four exposure modes to choose from: AUTOMATIC,
TEXT, TEXT/PHOTO and PHOTO.
Automatic
This is the standard initial setting for this copier. In this mode, the
characteristics of an original being copied are “read” by the exposure
system, and exposure adjustments are made automatically.
Thisoptimizesthecontrastofthecopiedimagesbyreducingtheeffect
of coloured or shaded background areas.
AUTO
EXPOSURE
Text, text/photo, and photo
Text mode:
Thismodeisusefulinenhancingverylowdensity
areas of an original or in suppressing unusually
high-density background areas.
Text/photo mode: This mode provides the best balance for copying
an original which contains both text and photos.
This mode is also useful for copying printed
photographs.
Photo mode:
Thismodeprovidesthebestcopiesofphotographs
with fine details.
Press the “EXPOSURE” key on the touch panel.
1
2
3
AUTO
AUT
EXPOSURE
PAPER
Select “TEXT”, “TEXT/PHOTO” or “PHOTO” depending
on the original.
AUTO
TEXT
1.
2.
A4
A3
NOTE:
Whenthephotomodeisselected, thecopyratioislimitedbetween
25% and 400%.
TEXT/PHOTO
PHOTO
AUTO
A
EXPOSURE
PAPER SE
1.8
Use the
and
keys to adjust the copy density
2.1
TEXT/PHOTO
as desired.
AU
EXPOSU
PAPE
2-16
Download from Www.Somanuals.com. All Manuals Search And Download.
SORT/GROUP
When the SORT (
) icon is indicated on the touch panel, copies
will be collated by sets and then delivered to the exit tray.
When the SORT (
by originals.
) icon is not indicated, copies will be grouped
●
When the RADF is used for copying, copies will be collated in the
default setting. To copy in the GROUP mode, press the OUTPUT
key and then select the GROUP mode on the touch panel. When
the GROUP mode is selected, the GROUP (
indicated on the touch panel.
When the document glass is used for copying, copies will be
grouped. To copy in the SORT mode, press the OUTPUT key and
then select the SORT mode on the touch panel.
) icon is
●
SORT mode
1
2
3
Each set of copies will be sequentially delivered to the exit
tray.
3
1
2
2
1
3
1
2
3
GROUP mode
1
1
1
All copies of the same original will be grouped in the exit
tray.
3
2
2
2
2
1
3
3
3
2-17
Download from Www.Somanuals.com. All Manuals Search And Download.
JOB MEMORY
Frequently used job programs can be stored in one of nine storage
registers. This is convenient for quick job recall without losing time
manually reprogramming each aspect of the job.
●
All functions that can be set in the copy mode except the copy
quantity setting can be stored in the job memory.
If any function which has been stored in a job program is modified
●
byakeyoperatorprogram, thekeyoperatorsettingswillsupercede
the previous setting.
★ KEY OPERATOR Job memory replacement/deletion can be
prohibited. See page 8-25.
Storing a job program
Press the PROGRAM (
) key.
P
CLEAR
8
0
9
PROGRAM
P
1
2
3
●
The JOB PROGRAMS screen will appear on the touch panel.
C
LEAR
Press the “STORE/DELETE” key on the touch panel.
●
To cancel the job memory mode, press the “EXIT” key or the
CA
CLEAR ALL ( ) key.
RECALL
STORE/DELETE
Select a program number from 1 to 9 on the touch panel.
EXIT
JOB PROGRAMS
PRESS PROGRAM NUMBER.
●
Thenumberswhicharehighlightedareprogramnumberswhich
have been used.
●
Ifaprogramnumberwhichhasbeenusedisentered,amessage
will appear to confirm the selection. To replace with the new
program, press the “STORE” key and proceed to the next step.
To cancel replacement, press the “CANCEL” key.
RECALL
STOLETE
Make all copier selections to be stored.
MAKE COPIER SELECTIONS AND PRESS
[OK].
OK
4
5
L
Press the “OK” key to complete the storage.
1. A4
2. A3
AUTO
AUTO A4
EXPOSURE
PAPER SELECT
2-18
Download from Www.Somanuals.com. All Manuals Search And Download.
JOB MEMORY
Deleting a stored job program
Follow steps 1 and 2 in “Storing a job program” on the
EXIT
JOB PROGRAMS
previous page. (1. Press the PROGRAM (
2. Press the “STORE/DELETE” key.)
) key.
P
1
2
PRESS PROGRAM NUMBER.
Select the storage register number of the program to be
deleted.
●
Be sure to select a number which contains a stored program. If
not, “Storing a job program” operation will start.
RECALL
TO
JOB PROGRAMS
Press the “DELETE” key.
PRESS PROGRAM NUMBER.
3
●
The program will be deleted from memory.
A JOB PROGRAM HAS BEEN ALREADY STORED.
STORE ANOTHER PROGRAM?
●
To cancel deletion, press the “CANCEL” key.
CANCEL
DELETE
STORE
RECALL
STORE/DELETE
Press the “EXIT” key to exit the job memory mode.
EXIT
JOB PROGRAMS
PRESS PROGRAM NUMBER.
4
RECALL
STOR
CLEAR
Recalling a job program
8
0
9
C
LEAR
PROGRAM
Press the PROGRAM (
) key.
P
1
2
●
P
The JOB PROGRAMS screen will appear on the touch panel.
●
The numbers which are indicated are program numbers which
contain stored programs.
Select a stored program from 1 to 9 on the touch panel.
●
EXIT
JOB PROGRAMS
All selections stored in the program will appear on the touch
panel.
PRESS PROGRAM NUMBER.
●
Therecalledsettingsmaybemodifiedforaparticularjobrun,but
anychangesmadewillnotbestoredinthejobmemory. Tostore
the new settings, follow the “Storing a job program” procedure.
RECALL
STORE/DELETE
2-19
Download from Www.Somanuals.com. All Manuals Search And Download.
INTERRUPTING A COPY RUN
INTERRUPT can be used to temporarily stop a long copy run so that
another job can be run.
●
INTERRUPT will not function during duplex copying.
●
Duplex copying, tandem copying and the JOB BUILD function can
not be selected during interrupt copying.
When an optional dual tray output unit (AR-TR1) is installed,
●
interrupt copies are output to the second tray of the unit.
★ KEY OPERATOR If the second tray is not installed, output of
copies to the second tray must be disabled. See page 8-27.
Press the INTERRUPT (
) key.
●
When the document feeder is being used, the copier will stop
aftercompletingthecopyingoftheoriginalswhichhavebeenfed
into the document feeder. The INTERRUPT indicator will blink
until the copier becomes ready for interrupt copying.
Then the INTERRUPT indicator will light up.
1
2
INTERRUPT
CLE
3
6
CA
The copier will return to the initial setting.
●
If the copier has been programmed in the auditing mode, the
account number entry message will appear. Enter your account
number using the 10-key pad. The number of copies of the
interrupt copying will be accumulated against this account
number.
When the copier stops, remove the original(s) and set
the original(s) for interrupt copying in the document
feeder tray or on the document glass.
●
The maximum number of originals for interrupt copying is
restricted.
1-sided originals: 20 sheets (10 sheets for B4 and A3 (8-1/2" x
14" and 11" x 17"))
2-sided originals: 10 sheets (5 sheets for B4 and A3 (8-1/2" x
14" and 11" x 17"))
INTERRUPT
CLEAR ALL
Select the desired available copier functions.
CA
3
4
Press the START ( ) key.
START
CLEAR
C
When the interrupt copy run is complete, press the
INTERRUPT (
remove the original(s) used for interrupt copying.
) key again to cancel the mode and
5
6
INTERRUPT
CLE
3
6
●
The copier will reset itself to the functions which were in use
CA
before the INTERRUPT (
) key was first pressed.
Replace the original(s) for the interrupted job and press
the START ( ) key to resume copying.
●
If scanning of originals has been already complete, the original
need not be replaced.
2-20
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3
SPECIAL FUNCTIONS
This chapter describes the special copying functions including various
image editing functions which have been made possible by digital image
processing technology.
Page
●
XY ZOOM ....................................... 3-2
●
MARGIN SHIFT ................................... 3-4
●
ERASE ......................................... 3-6
●
DUAL PAGE COPYING ............................. 3-8
●
MULTI SHOT .................................... 3-10
●
COVERS ....................................... 3-13
●
TRANSPARENCY FILM WITH INSERT SHEETS .......... 3-15
●
PAMPHLET COPY ................................ 3-17
●
IMAGE EDITING FUNCTIONS ....................... 3-20
Job build ....................................... 3-20
Centring ........................................ 3-22
Repeat copy ..................................... 3-24
B/W reverse* .................................... 3-27
Binding change................................... 3-29
●
TEXT STAMP.................................... 3-32
Date .......................................... 3-32
Select stamp .................................... 3-35
Watermark ...................................... 3-38
Page number .................................... 3-41
●
TANDEM COPY .................................. 3-44
●
SETTING REVIEW ................................ 3-46
* In some regions,the B/W reverse feature is not provided.
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
XY ZOOM
The XY ZOOM feature allows the horizontal and vertical copy ratios to
be changed independently. If this feature is selected, the copy ratios
can be set from 25% to 400% (for the AR-407) or from 25% to 800%
(fortheAR-287andAR-337).Theillustrationsbelowdescribethecase
of the AR-407.
Original
Copy
Place the original in the document feeder tray or on the
document glass.
1
Press the “COPY RATIO” key on the touch panel.
2
3
A4
ELECT
100%
COPY ATIO
Press the “XY ZOOM” key.
●
The following screen will appear.
ZOO
10
READY TO COPY.
B5 A5
81%
70%
B4 A4
OK
X
Y
100
100
%
%
A4 A5
A3 A4
70%
64%
50%
141
200
400
%
%
%
ZOOM
XY ZOOM
MENU
100%
AO
AUTO
XY ZOOM
AUTO
CANCEL
EXURE
PAPER S
AUTO A4
100%
COPY RATIO
EXPOSURE
PAPER SELECT
READY TO COPY.
Use the reduction, enlargement , and ZOOM (
keys to change the copy ratio in the horizontal (X)
direction.
,
)
OK
4
X
Y
100
100
%
%
70
64
50
%
141
200
400
%
%
%
●
%
Press a reduction key or an enlargement key to set the
ZOOM
approximate ratio, then press the
or key to increase the ratio.
key to decrease the ratio
100%
%
Y ZOOM
UTO
CANCEL
AUTO A4
100%
COPY RATIO
OSURE
PAPER SELECT
3-2
Download from Www.Somanuals.com. All Manuals Search And Download.
XY ZOOM
Press the
key.
TO COPY.
5
6
●
The copy ratio in the vertical (Y) direction will be highlighted.
X
Y
50
100
%
%
%
%
%
ZOOM
READY TO COPY.
Use the reduction, enlargement, and ZOOM (
keystochangethecopyratiointhevertical(Y)direction.
,
)
X
Y
50
100
OK
70%
●
To change the copy ratio in the horizontal direction again, press
X
the
key.
ZOOM
1
%
●
100%
The message “IMAGE IS LARGER THAN THE COPY PAPER.”
0
%
may appear, indicating that the selected copy ratio is too large
CANCEL
OM
for the copy paper size. However, if you press the START (
key, a copy will be made.
)
AUTO
A4
PAPER SELEC
Press the “OK” key.
7
8
READY TO COPY.
Press the “PAPER SELECT” key and select the paper
tray with the desired paper size.
1. A4
●
If the AUTO PAPER SELECT mode is on, the appropriate copy
2. A3
paper size will have been automatically selected based on the
original size and selected copy ratios.
AUTO
X-50%
Y-70%
EXPOSURE
COPY RATIO
Enter the desired number of copies.
Press the START ( ) key.
CLEAR ALL
INT
2
5
8
0
3
1
4
9
10
CA
6
●
START
Ifthedocumentfeederisused,scanningoforiginalsandcopying
will start.
7
9
PROGRAM
P
●
If the document glass is used in the SORT mode, proceed to the
AUDIT CLEAR
next step.
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
11
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
READ-END
TO IMAGE
0% Y—70%
ATIO
●
Copying will start at this time.
AUTO
A4
PAPER SELECT
EXPOSURE
●
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
●
To cancel this function, press the “CANCEL” key or the “XY
ZOOM” key again as in step 3.
3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
MARGIN SHIFT
TheMARGINSHIFTfeature,initsinitialsetting,automaticallyshiftsthetext
or image to the right both on one-sided copies and on the front side of two-
sided copies. The text or image is shifted to the left on the reverse side of
two-sided copies. Shift direction can be changed to left, up or down in the
manner described below in step 4.
Original
Copy
●
The standard shift amount is 10 mm (1/2"), but can be changed from
0 mm to 20 mm in 1 mm increments (from 0" to 1" in 1/8" increments).
★ KEY OPERATOR
The initial shift setting can be changed from 0 mm
Expanded margin
to 20 mm in 1 mm increments (from 0" to 1" in 1/8" increments). See page
8-16.
(Initial setting:
copy image shifted to the right)
NOTE:
The front side and reverse side are referred to as “SIDE 1” and “SIDE 2”
respectively on the touch panel.
Place the original in the document feeder tray or on the
Margin is expanded here.
document glass.
1
Margin is expanded here.
Press the SPECIAL MODES key.
2
●
The SPECIAL MODES screen will appear.
READY TO COPY.
READY TO CO
OK
SPECIAL MODES
MARGIN SHIFT
MULTI SHOT
DUAL PAGE
ERASE
COVERS
COPY
TRANSPARENCY
INSERTS
TEXT STAMP
PAMPHLET COPY
IMAGE EDIT
AUTO
AUTO A4
100%
COPY RATIO
EXPOSURE
PAPER SELECT
3-4
Download from Www.Somanuals.com. All Manuals Search And Download.
MARGIN SHIFT
Press the “MARGIN SHIFT” key on the touch panel.
READY TO COPY.
SPECIAL MODES
3
●
The setting screen for MARGIN SHIFT will appear.
OK
DUAL PAGE
MARGIN SHIFT
MULTHOT
ERASE
COVERS
COPY
READY TO COPY.
TRANSPARENCY
INSERTS
OK
TEXT STAMP
PAMPHPY
IMAGE EDIT
CANCEL
SIDE 1
OK
MARGIN SHIFT
RIGHT
AUTO A4
100%
COPY RATIO
LEFT
UP
SIDE 2
PAPER SELECT
(0~20)
(0~20)
DOWN
10
10
mm
mm
CANCEL
MARGIN SHIFT
RIGHT
LEFT
UP
SIDE 1
Select the shift direction.
4
5
●
Select “RIGHT”, “LEFT”, “DOWN” or “UP” on the touch panel.
The selected shift direction will be highlighted.
(0~20)
mm
DOWN
10
Select the desired shift amounts using the
keys.
and
CLEAR ALL
Press the upper “OK” key on the touch panel.
CA
6
7
OK
START
Make all other desired copier selections and press the
START ( ) key.
●
Ifthedocumentfeederisused,scanningoforiginalsandcopying
will start.
SI
●
If the document glass is used in the SORT mode, proceed to the
next step.
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
8
READ-END
AUTO
EXPOSURE
AUTO A4
100%
ATIO
●
Copying will start at this time.
PAPER SELECT
●
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
To cancel the MARGIN SHIFT function, select the MARGIN
SHIFT function again and press the “CANCEL” key.
●
3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
ERASE
Edge erase
This copier has an edge erase mode and a centre erase mode.
●
Edge erase can be used to eliminate shadow lines around the edges of
copies caused when thick paper or a book is used as an original.
Centre erase can be used to eliminate the shadow produced by the
●
A
A
bindings of bound documents.
Edge + centre erase can be used to eliminate shadow lines around the
●
Centre erase
edges of copies and to eliminate the shadow at the centre of copies.
●
Thestandarderasewidthis10mm(1/2"),butcanbechangedfrom0mm
to 20 mm in 1 mm increments (from 0" to 1" in 1/8" increments).
A B
A B
★ KEYOPERATOR Theinitialsettingofthewidthforedgeeraseandcentre
erase can be changed. See page 8-16.
Edge + Centre erase
A B
A B
Place the original in the document feeder tray or on the
document glass.
1
Press the SPECIAL MODES key.
2
●
The SPECIAL MODES screen will appear.
READY TO CO
Press the “ERASE” key on the touch panel.
3
●
The setting screen for ERASE will appear.
READY TO COPY.
SPECIAL MODES
READY TO COPY.
OK
OK
DUAL PAGE
MARGIN SHIFT
MULTI SHOT
ERASE
CS
CANCEL
OK
COPY
ERASE
TRANSPARENCY
INSERTS
(0~20)
10
mm
EDGE ERASE
TEXT STAMP
PAMPHLET COPY
IMADIT
CENTRE ERASE
AUTO
A
100%
COPY RATIO
EDGE+CENTRE
ERASE
EXPOSURE
3-6
Download from Www.Somanuals.com. All Manuals Search And Download.
ERASE
READY TO COPY.
ERASE
Select the desired erase mode.
4
5
6
7
8
●
OK
OK
Select“EDGEERASE”,“CENTREERASE”or“EDGE+CENTRE
ERASE” on the touch panel. The selected erase mode will be
highlighted.
CANCEL
EDGE ERASE
CENTRE ERASE
EDGE+CENTRE
ERASE
Adjust the amount of edge erase and/or centre erase if
needed.
OK
OK
CANCEL
ERASE
●
The amount can be adjusted between 0 mm and 20 mm in 1 mm
(0~20)
increments (0" and 1" in 1/8" increments).
10
mm
EDGE ERASE
CENTRE ERASE
EDGE+CENTRE
ERASE
Press the upper “OK” key on the touch panel.
OK
CANCEL
Make all other desired copier selections and press the
START ( ) key.
INTERRUPT
CLEAR ALL
CA
●
Ifthedocumentfeederisused,scanningoforiginalsandcopying
will start.
START
●
If the document glass is used in the SORT mode, proceed to the
next step.
CLEAR
C
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
READ-END
●
Copying will start at this time.
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
AUTO
EXPOSURE
AUTO A4
100%
ATIO
PAPER SELECT
●
of originals larger than A4 (8-1/2" x 11") can be scanned.
●
TocanceltheERASEfunction,selecttheERASEfunctionagain
and press the “CANCEL” key.
3-7
Download from Www.Somanuals.com. All Manuals Search And Download.
DUAL PAGE COPYING
The DUAL PAGE COPY feature produces separate copies of two
documents placed side by side on the document glass. It is especially
useful when copying books and other bound documents.
This feature can be used in the one-sided to two-sided copying mode.
Place the originals on the document glass with the
centreofthetwopagesalignedwiththepapersizeindex
1
A4 ( 81/2). Close the document feeder cover.
●
Set the page to be copied first on the left part of the document
glass.
A4
Paper size index
Press the SPECIAL MODES key.
2
3
●
The SPECIAL MODES screen will appear.
READY TO CO
Press the “DUAL PAGE COPY” key on the touch panel.
●
READY TO COPY.
SPECIAL MODES
The “DUAL PAGE COPY” key will be highlighted.
A4(8-1/2"x11")sizedcopypaperwillbeautomaticallyselected.
If A4 (8-1/2" x 11") copy paper is not loaded, copying can be
performed with the currently selected tray.
To leave a binding margin on the copy, select the MARGIN
OK
●
DUAL PAGE
MARGIN SHIFT
MULTI SHOT
ERASE
COVERS
CY
TRANSPCY
INS
●
SHIFT function. See page 3-4. The MARGIN SHIFT feature
applies only to the left page on the document glass if “RIGHT” or
“LEFT” of MARGIN SHIFT has been selected.
TEXT P
PAMPHLET COPY
IMAGE EDIT
AUTO
AUTO A4
1
EXPOSURE
PAPER SELECT
●
To erase shadows caused by document binding, use the EDGE
ERASE feature. See page 3-6.
Press the “OK” key.
4
OK
DUAGE
C
TRANSPAY
INSE
3-8
Download from Www.Somanuals.com. All Manuals Search And Download.
DUAL PAGE COPYING
Ensure that the desired tray is selected.
EADY TO COPY.
5
6
7
1. A4
2. A3
AUTO IMAGE
AUTO
A4
100%
Enter the desired number of copies.
INTERRUPT
2
5
8
0
3
6
1
4
7
CLEAR
9
PROGRAM
P
C
AUDIT CLEAR
Press the START ( ) key.
INTERRUPT
CLEAR ALL
●
If the SORT mode has been selected for copying multiple
CA
originals, proceed to the next step. If not, copying will start.
START
CLEAR
C
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
8
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
READ-END
TO IMAGE
AUTO
A4
PAPER SELECT
100%
ATIO
●
Copying will start at this time.
EXPOSURE
●
Up to 60 sheets of A3 (11" x 17") originals can be scanned.
●
To cancel the DUAL PAGE COPY function, press the “DUAL
PAGE COPY” key again on the SPECIAL MODES screen.
3-9
Download from Www.Somanuals.com. All Manuals Search And Download.
MULTI SHOT
The MULTI SHOT function is used to copy several originals, collectively in
a specified order, onto one sheet.
●
When the MULTI SHOT is selected, the copy ratio is limited between
25% and 400%.
Placetheoriginalsinthedocumentfeedertrayor onthe
document glass.
1
●
Whenusingthedocumentglass,placetheoriginalsoneatatime
in the reverse order, starting with the last original first.
Press the “PAPER SELECT” key on the touch panel and
select the desired paper size.
READY TO COPY.
2
1. A4
2. A3
AUTO
100%
COPY RATIO
EXPOSURE
Press the 2-SIDED COPY key and select a duplex mode
if desired. Press the “OK” key to close the duplex
selection window.
3
Press the SPECIAL MODES key.
4
●
The SPECIAL MODES screen will appear.
READY TO CO
3-10
Download from Www.Somanuals.com. All Manuals Search And Download.
MULTI SHOT
Press the “MULTI SHOT” key on the touch panel.
READY TO COPY.
SPECIAL MODES
5
●
The function setting screen for MULTI SHOT will appear.
OK
DUAL PAGE
READY TO COPY.
MARGIN SHIFT
MULTI SHOT
ERASE
COVERS
COPY
TRANSPARENCY
INSERTS
OK
CANCEL
LAYOUT
OK
BORDER LINE
MULTI SHOT
2inl
TEXT STAMP
PAMPCOPY
IMAGE EDIT
4inl
A
A4
PAPER SELECT
100%
COPY RATIO
EXP
8inl
16inl
Select the number of originals to be included on one
sheet of copies.
OK
OK
6
7
8
●
Select “2in1”, “4in1”, “8in1” or “16in1” on the touch panel.
CANCEL
LAYOUT
MULTI SHOT
2inl
●
The copy ratio will be calculated automatically.
4inl
●
Portions of original images may not be copied depending on the
original and copy paper sizes and the number of images to be
copied onto a page.
8inl
16inl
●
Depending on the number of originals and the orientation of the
originals and copy paper, the image of the originals may be
rotated.
Select the layout of originals on the copy.
OK
OK
BORDER
●
Select the order of originals which will be arranged on the copy.
CANCEL
LAYOUT
MULTI SHOT
2inl
●
For example, the following types are provided for “4in1”.
4inl
2
4
1
3
3
4
1
2
1
3
2
4
1
2
3
4
8inl
16inl
Select a type of border line.
OK
OK
●
Select the solid line, broken line or no border line.
CANCEL
LAYOUT
SHOT
nl
BORDER LINE
4inl
nl
16inl
3-11
Download from Www.Somanuals.com. All Manuals Search And Download.
MULTI SHOT
Press the upper “OK” key.
OK
9
CANCEL
LAYOUT
K
BORLINE
SHOT
nl
4inl
nl
16inl
Enter the desired number of copies.
INTERRUPT
2
5
8
0
3
6
1
4
10
CLEAR
7
9
PROGRAM
P
C
AUDIT CLEAR
INTERRUPT
Press the START ( ) key.
CLEAR ALL
11●
Ifthedocumentfeederisused,copyingwillstartafteralloriginals
are scanned.
CA
●
If the document glass is used, proceed to the next step.
START
CLEAR
C
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
12
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
READ-END
TO IMAGE
AUTO
A4
PAPER SELECT
100%
ATIO
●
Copying will start at this time.
EXPOSURE
●
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
●
To cancel the MULTI SHOT function, select the MULTI SHOT
function again and press the “CANCEL” key.
3-12
Download from Www.Somanuals.com. All Manuals Search And Download.
COVERS
The COVERS mode is used to place covers on the front, back, or both
the front and back of multipage documents.
●
Front cover sheets can be copied on, but only on the front side even
in the 1-sided to 2-sided and 2-sided to 2-sided copy modes.
The back side of the original designated as the cover will not be
copied.
●
Backcoversheetscannotbecopiedon, eitheronthefrontsideoron
the back side.
●
Coversheetsmustbefedfromthebypasstrayandmustbethesame
size as the copy paper being used to copy the document.
When the COVERS mode is selected, the stream feeding mode of
●
the RADF will always be off.
Place the originals in the document feeder tray.
1
Press the 2-SIDED COPY key and select the desired
duplex mode if needed. Press the “OK” key to close the
duplex selection window.
2
Press the SPECIAL MODES key.
3
4
●
The SPECIAL MODES screen will appear.
READY TO CO
Press the “COVERS” key on the touch panel.
●
The setting screen for COVERS will appear.
READY TO COPY.(DOCUMENT FEEDER MODE)
LOAD COVER STOCK INTO BYPASS-TRAY.
OK
SPECIAL MODES
MARGIN SHIFT
MULTI SHOT
OK
DUAL PAGE
ERASE
COVRS
CANCEL
OK
COPY
COVERS
TRANSPARENCY
INSERTS
PRINT ON FRONT COVER?
FRONT
TEXT STAMP
YES
NO
PAMPHLET COPY
IMADIT
BACK
AUTO
AA4
100%
COPY RATIO
EXPOSURE
PAPT
FRONT+BACK
3-13
Download from Www.Somanuals.com. All Manuals Search And Download.
COVERS
Select cover placement.
O
O
5
6
●
Select “FRONT”, “BACK” or “FRONT+BACK” on the touch
CANCEL
COVERS
panel.
PRINT ON FRONT
FRONT
YES
NO
BACK
FRONT+BACK
Indicate whether the front cover sheets are copied on or
not.
OK
OK
CANCEL
●
Select“YES”or“NO”onthetouchpanel.If“YES”isselected,the
PRINT ON FRONT COVER?
first page of the document will be copied onto the front cover
sheet.
NT
YES
NO
●
If “BACK” has been selected in step 5, this selection is not
needed.
K
NT+BACK
Press the upper “OK” key.
7
8
9
OK
OK
NCEL
T ON FRON?
Load the cover stock into the bypass tray, making sure
that the cover stock is the same size as the copy paper.
●
The START ( ) key indicator will light up.
Enter the desired number of copies and press the
START ( ) key.
CLEAR ALL
INT
2
5
8
0
3
6
1
4
CA
●
To cancel the COVERS function, select the COVERS function
again and press the “CANCEL” key.
START
7
9
PROGRAM
P
AUDIT CLEAR
3-14
Download from Www.Somanuals.com. All Manuals Search And Download.
TRANSPARENCY FILM WITH INSERT SHEETS
When copying onto transparency film, insert sheets can be placed
following each transparent sheet. The insert sheets can be processed
blank or can be copied with the same image as the transparent sheets.
4
3
4
2
3
4
1
3
3
●
Thismodecanbeselectedonlyinthe1-sidedto1-sidedand2-sided
2
2
to 1-sided modes.
1
1
●
A multiple number of copies cannot be selected in this mode.
1
●
Transparency film must be fed from the bypass tray.
●
INSERTS WITH
PRINTING
Insert sheets must be the same size as the transparency film.
4
3
2
4
1
3
2
1
3
1
INSERTS WITHOUT
PRINTING
Place the originals in the document feeder tray or on the
document glass.
1
Press the SPECIAL MODES key.
2
3
●
The SPECIAL MODES screen will appear.
READY TO CO
Pressthe“TRANSPARENCYINSERTS”keyonthetouch
panel.
●
ThesettingscreenforTRANSPARENCYINSERTSwillappear.
READY TO COPY.
SPECIAL MODES
LOAD TRANSPARENCY STOCK INTO
BYPASS-TRAY.
OK
OK
DUAL PAGE
MARGIN SHIFT
MULTI SHOT
ERASE
CANCEL
OK
COPY
TRANSPARENCY INSERTS
PRINT ON THE INSERT
TRANSPARENCY
INSRTS
COVERS
SHEETS?
TEXTAMP
PAMPHLET COPY
IMAGE EDIT
YES
NO
AUTO
AUTO A4
0%
CRATIO
EXPOSURE
PAPER SELECT
3-15
Download from Www.Somanuals.com. All Manuals Search And Download.
TRANSPARENCY FILM WITH INSERT SHEETS
Indicate whether the insert sheets are copied on or not.
OK
OK
4
5
●
Select “YES” or “NO” on the touch panel.
OK
O
THE IN
CANCEL
PRINT ON THE INSERT
SHEETS?
Press the upper “OK” key.
YES
NO
Load transparency film into the bypass tray.
6
Ensurethatthedesiredtrayisselectedforinsertsheets.
ORIGINAL A4
A4
7
●
The copy paper for insert sheets must be the same size as the
transparency film.
1. A4
2. A3
AUTO A4
100%
COPY RATIO
PAPER SELECT
INTERRUPT
CLEAR ALL
Make all other selections and press the START ( ) key.
8
9
●
Ifthedocumentfeederisused,scanningoforiginalsandcopying
will start.
CA
●
If the document glass is used in the SORT mode, proceed to the
next step.
START
CLEAR
C
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
●
READ-END
Copying will start at this time.
●
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
When copying is completed, remove remaining transparency
AUTO
AUTO A4
100%
ATIO
●
EXPOSURE
PAPER SELECT
film.
●
To cancel the TRANSPARENCY INSERTS function, select the
TRANSPARENCY INSERTS function again and press the
“CANCEL” key.
3-16
Download from Www.Somanuals.com. All Manuals Search And Download.
PAMPHLET COPY
The PAMPHLET COPY function is used to arrange copies in proper
orderforeventualcentre-staplingandfoldingintoabooklet.Fourpages
will be copied onto one sheet.
Originals
(1-sided)
●
Centre stapling cannot be performed by this copier.
Even if PAMPHLET COPY is selected and the optional finishers
(AR-FN1N,AR-FN2)isinstalled,centre-staplingcannotbeperformed.
●
This function will not work when non-standard size originals or copy
paper are used.
●
When the PAMPHLET COPY function is selected, the copy ratio is
limited between 25% and 400%.
Originals
(2-sided)
Place the originals in the document feeder tray or on the
document glass.
1
●
Whenusingthedocumentglass,placetheoriginalsoneatatime
in the reverse order, starting with the last original first.
Press the SPECIAL MODES key.
2
●
The SPECIAL MODES screen will appear.
READY TO CO
3-17
Download from Www.Somanuals.com. All Manuals Search And Download.
PAMPHLET COPY
Press the “PAMPHLET COPY” key on the touch panel.
READY TO COPY.
SPECIAL MODES
3
●
The setting screen for PAMPHLET COPY will appear.
OK
●
Depending on installation of an optional component, the
DUAL PAGE
MARGIN SHIFT
MULTI SHOT
ERASE
COVERS
COPY
“PAMPHLET COPY” function may be included in the “IMAGE
EDIT” menu. In this case, press the “IMAGE EDIT” key and then
press the “PAMPHLET COPY” key.
TRANSPARENCY
INSERTS
TEXT STAMP
PAMPHLCOPY
IMAGE EDIT
A
AUTO A4
100%
COPY RATIO
READY TO COPY.
EXPE
PAPER SELECT
OK
CANCEL
OK
PAMPHLET COPY
ORIGINAL
LEFT BINDING
1-SIDED
2-SIDED
RIGHT BINDING
Select the type of originals.
READY TO COPY.
PAMPHLET COPY
4
5
6
●
Indicate whether the originals are 1-sided or 2-sided using the
“1-SIDED” or “2-SIDED” key on the touch panel.
OK
CANCEL
OK
ORIGINAL
LEFT BINDING
1-SIDED
2-SIDED
RIGHT BINDING
Select the binding position.
READY TO COPY.
PAMPHLET COPY
●
Select “LEFT BINDING” or “RIGHT BINDING” on the touch
OK
OK
panel.
CANCEL
ORIGINAL
LEFT BINDING
1-SIDED
2-SIDED
RIGHT BINDING
Press the upper “OK” key.
READY TO COPY.
PAMPHLET COPY
OK
CANCEL
ORIGINAL
LEFT ING
1-SIDED
2-SIDED
R
3-18
Download from Www.Somanuals.com. All Manuals Search And Download.
PAMPHLET COPY
Check the copy paper selection.
7
8
●
When the desired paper size is not selected, touch the desired
paper tray on the touch panel then the AUTO IMAGE key. This
letsthecopierautomaticallysetthebestreductionorenlargement
ratio and display it on the touch panel, judging from the placed
original size and the desired paper size.
AUT
O
A4
URE
PAPER SELECT
COP
(See steps 2 and 3 of page 2-11.)
Enter the desired number of copies.
INTERRUPT
2
5
8
0
3
6
1
4
CLEAR
7
9
PROGRAM
P
C
AUDIT CLEAR
Press the START ( ) key.
INTERRUPT
CLEAR ALL
9
●
Ifthedocumentfeederisused,copyingwillstartafteralloriginals
are scanned.
CA
●
If the document glass is used, proceed to the next step.
START
CLEAR
C
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
10
READ-END
TO IMAGE
AUTO
A4
PAPER SELECT
70%
●
Copying will start at this time.
EXPOSURE
●
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
●
Iforiginalsofdifferentsizesareused, thecopypapersizewillbe
determinedbasedontheoriginalthatisscannedfirst.Iforiginals
largerthanthefirstoriginalareused,aportionoftheimagesmay
not be copied.
●
You can make a pamphlet by folding the copies in two and
stapling them.
●
TocancelthePAMPHLETCOPYfunction,selectthePAMPHLET
COPY function again and press the “CANCEL” key.
3-19
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE EDITING FUNCTIONS
The image editing functions include the following functions.
●
Job build: Makes copies from a large volume of originals (up to 120
pages of A4 (8-1/2" x 11") paper size) using the document feeder.
Centring: Shifts the image to the centre of copy paper when the
●
original and the copy paper are of different sizes.
Repeat copy: Produces repeated copies on a single sheet of copy
●
paper.
●
B/W reverse: Reverses the black and white areas.
●
Binding change: Rotates the image of originals for the second side
in the 1-sided to 2-sided copy mode.
These functions are selected by pressing the “IMAGE EDIT” key on
the SPECIAL MODES screen and pressing the key of each function.
JOB BUILD
TheJOBBUILDfunctionallowscopyingofmultipagedocumentscontaining
up to 120 pages (the limit, however, might be up to 60 pages of B4 or A3
(8-1/2"x14"or11"x17")papersize whenthecopierisequippedwithsome
option) using the RADF. The original must be divided into sections of up to
50 pages per section. Each section can be fed separately through the
RADF for eventual copying into a complete set(s).
Original
a b c
71 page
1 page
21 page
●
Once a copy job is set in this mode, the copy mode can not be changed
betweenthesimplexandduplexmodesexceptforINTERRUPTcopying.
WhentheJOBBUILDfunctionisselected,thebelowmentionedfunctions
20 sheets
50 sheets
50 sheets
●
Divide the original containing more than
50 pages into some sections as shown
aboveandfeedthemintheorderof c
cannotbeselectedsimultaneously.GROUPMODE/TRANSPARENCY
INSERTS/DUAL PAGE COPY/REPEAT COPY.
The JOB BUILD mode has priority over the stream feeding mode.
●
b
a. The original should be less than
Stream feeding will not operate while the JOB BUILD mode is selected.
120 pages in total. If the total page
exceeds 120 (if the above section “a”
exceeds20pages), thepagesinexcess
of the limit will be output to the exit area
without being copied.
The illustration shows an example when copying 120 pages of original.
Divide the multipage document (maximum 120 pages)
into sections of 50 pages or less and place the section
containing the first page of the document into the
document feeder tray.
1
If a duplex copy mode is required, it must be selected at
this time by pressing the 2-SIDED COPY key.
2
3-20
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE EDITING FUNCTIONS
Press the SPECIAL MODES key.
3
4
●
The SPECIAL MODES screen will appear.
READY TO CO
Press the “IMAGE EDIT” key.
READY TO COPY.
SPECIAL MODES
●
The IMAGE EDIT menu will appear.
OK
DUAL PAGE
MARGIN SHIFT
MULTI SHOT
ERASE
COVERS
READY TO COPY.
SPECIAL MODES
IMAGE EDIT
COPY
TRANSPARENCY
INSERTS
OK
OK
TEXT STAMP
PAMPHLET COPY
IMAGE EDIT
AUTO
AU
A4
100%
COPY RATIO
EXPOSURE
PAPELECT
JOB BUILD
CENTRING
REPEAT COPY
B/W
BINDING
CHANGE
REVERSE
READY TO COPY.
SPECIAL MODES
IMAGE EDIT
OK
OK
Press the “JOB BUILD” key.
5
6
●
The “JOB BUILD” key will be highlighted.
JOB BUILD
CENTRING
REPEAT COPY
BINDING
CHANGE
REE
Press the upper “OK” key.
OK
OK
NCEL
T ON FRON?
Make all other desired copy mode selections and enter
the desired number of copies.
INTERRUPT
2
5
8
0
3
6
1
4
7
CLEAR
7
9
PROGRAM
P
C
AUDIT CLEAR
3-21
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE EDITING FUNCTIONS
INTERRUPT
CLEAR ALL
Press the START ( ) key.
8
●
Scanning of the first section will start.
CA
START
CLEAR
C
After the first section of original pages has been fed and
theSTARTlightsup, removethescannedoriginalsfrom
the exit area, set the next section of original pages into
the document feeder tray and press the START ( ) key.
Repeat this sequence until all sections have been fed.
Then press the “READ-END” key on the touch panel.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
9
READ-END
AUTO
EXPOSURE
AUTO A4
100%
ATIO
PAPER SELECT
●
Copying will start at this time.
CENTRING
When the original and copy paper are of different sizes, CENTRING is
used to shift the image as a whole to the centre of the copy paper.
The image will shift only in the left to right direction, not in the top to
bottom direction.
●
This function will not work when non-standard size originals or copy
paperareused.Thisfunctioncannotbeselectedwhenenlargement
copying has been selected.
Place the originals in the document feeder tray or on the
document glass.
1
3-22
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE EDITING FUNCTIONS
Press the “PAPER SELECT” key on the touch panel and
select the desired paper size.
READY TO COPY.
2
3
4
1. A4
2. A3
AUTO
100%
EXPOSURE
COPY RATIO
Press the SPECIAL MODES key.
●
The SPECIAL MODES screen will appear.
READY TO CO
Press the “IMAGE EDIT” key on the touch panel.
READY TO COPY.
SPECIAL MODES
●
The IMAGE EDIT menu will appear.
OK
DUAL PAGE
MARGIN SHIFT
MULTI SHOT
ERASE
COVERS
COPY
TRANSPARENCY
INSERTS
TEXT STAMP
PAMPHLET COPY
IMAGE EDIT
AUTO
PAPELECT
100%
COPY RATIO
EXPOSURE
Press the “CENTRING” key.
5
6
●
The “CENTRING” key will be highlighted.
OK
Press the upper “OK” key.
D
CENTRING
REPE
ING
GE
G
REPEAY
Make all other desired copier selections and enter the
desired number of copies.
INTERRUPT
2
3
6
1
4
7
5
8
0
CLEAR
7
9
PROGRAM
P
C
AUDIT CLEAR
3-23
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE EDITING FUNCTIONS
INTERRUPT
CLEAR ALL
Press the START ( ) key.
●
Ifthedocumentfeederisused,scanningoforiginalsandcopying
will start.
If the document glass is used in the SORT mode, proceed to the
next step.
8
CA
●
START
CLEAR
C
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
9
READ-END
TO IMAGE
AUTO
A3
PAPER SELECT
100%
ATIO
●
Copying will start at this time.
EXPOSURE
●
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
●
To cancel the CENTRING function, press the “CENTRING” key
again on the IMAGE EDIT menu screen.
REPEAT COPY
C
REPEAT COPY is used to produce repeated images of an original on a
single sheet of paper. Border lines can be drawn to separate repeated
images.
C
C
C
B
B
B
B
C
●
Up to 16 (4 x 4) copies can be made on a single sheet.
B
Howeverpartoftheoriginalimagemaynotbecopied, dependingonthe
original size, copy paper size, and the copy ratio.
●
This function will not work when non-standard size paper is used.
●
If the proper reduction ratio is calculated as less than 25%, part of the
original will not be copied. In that case the reduction ratio will be set to
25% showing the following message on the display. “IMAGE DOES NOT
FITINTOTHEIMAGEAREA. COPYRATIOWILLBESETTO25%.”
Place the originals in the document feeder tray or on the
document glass.
1
3-24
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE EDITING FUNCTIONS
8/ 11R
2
Select the desired copy paper size.
2
3
●
Press the “PAPER SELECT” key on the touch panel and then
select the desired paper size.
1. A4
2. A3
AUTO
AUTO A4
100
POSURE
PAPER ELECT
COPY RA
Press the SPECIAL MODES key.
●
The SPECIAL MODES screen will appear.
READY TO CO
Press the “IMAGE EDIT” key on the touch panel.
READY TO COPY.
SPECIAL MODES
4
5
●
The IMAGE EDIT menu will appear.
OK
DUAL PAGE
MARGIN SHIFT
MULTI SHOT
ERASE
COVERS
COPY
TRANSPARENCY
INSERTS
TEXT STAMP
PAMPHLET COPY
IMAGE EDIT
AUTO
PAPELECT
100%
COPY RATIO
EXPOSURE
Press the “REPEAT COPY” key on the touch panel.
●
The setting screen for REPEAT COPY will appear.
READY TO COPY.
SPECIAL MODES
IMAGE EDIT
OK
OK
READY TO COPY.
OK
CANCEL
OK
BORDER LINE
REPEAT COPY
JOB BUILD
CENTRING
REPEAT COPY
2
8
4
B/W
BINDING
CHANGE
REVERSE
16
BORDER L
2
8
4
Select the number of images to be repeated on a single
sheet of copy paper.
6
16
●
Select “2”, “4”, “8” or “16” on the touch panel.
3-25
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE EDITING FUNCTIONS
Select a type of border line.
CANCEL
OK
BORDER LINE
7
8
9
●
Select the solid line, broken line or no border line.
4
16
Press the upper “OK” key.
OK
K
CANCEL
BORLINE
4
16
Make all other desired copier selections and enter the
desired number of copies.
INTERRUPT
2
5
8
0
3
6
1
4
●
If the required area of the originals is not included on the copies,
select a proper reduction ratio.
CLEAR
7
9
PROGRAM
P
C
AUDIT CLEAR
INTERRUPT
CLEAR ALL
Press the START ( ) key.
●
Ifthedocumentfeederisused,scanningoforiginalsandcopying
will start.
If the document glass is used in the SORT mode, proceed to the
next step.
10
11
CA
●
START
CLEAR
C
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
READ-END
TO IMAGE
●
Copying will start at this time.
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
AUTO
A3
PAPER SELECT
100%
●
EXPOSURE
ATIO
●
To cancel the REPEAT COPY function, select the REPEAT
COPY function again and press the “CANCEL” key.
3-26
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE EDITING FUNCTIONS
B/W REVERSE
The B/W REVERSE feature is used to reverse black and white areas.
●
When the B/W REVERSE feature is selected, the exposure mode
will be automatically set to the TEXT mode. Other exposure modes
cannot be selected.
Evenifthisfeatureiscancelled,theTEXTmodewillnotautomatically
be cancelled.
In some regions,the B/W REVERSE feature is not provided.
●
Place the original in the document feeder tray or on the
document glass.
1
Press the SPECIAL MODES key.
2
3
4
●
The SPECIAL MODES screen will appear.
READY TO CO
Press the “IMAGE EDIT” key on the touch panel.
READY TO COPY.
SPECIAL MODES
●
The IMAGE EDIT menu will appear.
OK
DUAL PAGE
MARGIN SHIFT
MULTI SHOT
ERASE
COVERS
COPY
TRANSPARENCY
INSERTS
TEXT STAMP
PAMPHLET COPY
IMAGE EDIT
AUTO
AUA4
100%
COPY RATIO
EXPOSURE
PAPELECT
Press the “B/W REVERSE” key on the touch panel.
READY TO COPY.
SPECIAL MODES
IMAGE EDIT
●
The “B/W REVERSE” key will be highlighted.
OK
OK
JOB BUILD
CENTRING
REPEAT COPY
B/W
BINDING
CHANGE
RESE
3-27
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE EDITING FUNCTIONS
Press the upper “OK” key.
5
OK
CENTRING
REPEAT Y
Make all other desired copier selections and enter the
desired number of copies.
INTERRUPT
2
5
8
0
3
1
4
6
7
8
6
CLEAR
7
9
C
AUDIT CLEAR
PROGRAM
P
Press the START ( ) key.
INTERRUPT
CLEAR ALL
●
Ifthedocumentfeederisused,scanningoforiginalsandcopying
CA
will start.
●
If the document glass is used in the SORT mode, proceed to the
START
next step.
CLEAR
C
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
READ-END
AUTO
A4
100%
ATIO
●
Copying will start at this time.
EXPOSURE
PAPER SELECT
●
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
of originals larger than A4 (8-1/2" x 11") can be scanned.
To cancel the B/W REVERSE function, press the “B/W
REVERSE” key again on the IMAGE EDIT menu screen.
●
3-28
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE EDITING FUNCTIONS
BINDING CHANGE
This function rotates the image of originals of the second side in the 1-sided to 2-sided copy mode. This function is
useful for copying B4 or A3 (8-1/2" x 14" or 11" x 17") originals in the 1-sided to 2-sided copy mode to allow left side
binding.
Original
Setting of originals
Copies
Portrait orientation setting
Normal 1-sided to 2-sided copying
A
E
The binding edge is
at the left side.
C
G
1
A B
C D
Binding edge
1-sided to 2-sided copying with
binding change
Binding edge
The binding edge is
at the top.
A B
E F
A B
E F
C D
1
G H
Landscape orientation setting
Normal 1-sided to 2-sided copying
2
Binding edge
The binding edge is
at the top.
A B
E F
1
C D
A B
1-sided to 2-sided copying with
binding change
A
The binding edge is
at the left side.
E
C
G
Binding edge
●
This function will not work when non-standard size paper (or
5-1/2" x 8-1/2" paper) is used.
3-29
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE EDITING FUNCTIONS
Place the originals in the document feeder tray or on the
document glass.
1
Press the 2-SIDED COPY key and select the 1-sided to 2-
sided copy mode.
2
3
4
5
Press the SPECIAL MODES key.
●
The SPECIAL MODES screen will appear.
READY TO CO
Press the “IMAGE EDIT” key on the touch panel.
READY TO COPY.
SPECIAL MODES
●
The IMAGE EDIT menu will appear.
OK
DUAL PAGE
MARGIN SHIFT
MULTI SHOT
ERASE
COVERS
COPY
TRANSPARENCY
INSERTS
TEXT STAMP
PAMPHLET COPY
IMAGE EDIT
AUTO
AUA4
100%
COPY RATIO
EXPOSURE
PAPLECT
Press the “BINDING CHANGE” key on the touch panel.
READY TO COPY.
SPECIAL MODES
IMAGE EDIT
●
The “BINDING CHANGE” key will be highlighted.
OK
OK
JOB BUILD
CENTRING
REPEAT COPY
B/W
BINDING
CHE
REVERSE
3-30
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE EDITING FUNCTIONS
Press the upper “OK” key.
6
7
8
9
OK
CENTRING
REPEAT Y
Make all other desired copier selections and enter the
desired number of copies.
INTERRUPT
2
5
8
0
3
1
4
6
CLEAR
7
9
C
AUDIT CLEAR
PROGRAM
P
INTERRUPT
CLEAR ALL
Press the START ( ) key.
●
Ifthedocumentfeederisused,scanningoforiginalsandcopying
CA
will start.
●
If the document glass is used, proceed to the next step.
START
CLEAR
C
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
READ-END
AUTO
EXPOSURE
AUTO A4
100%
ATIO
●
Copying will start at this time.
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
PAPER SELECT
●
of originals larger than A4 (8-1/2" x 11") can be scanned.
●
To cancel the BINDING CHANGE function, press the
“BINDING CHANGE” key again on the IMAGE EDIT menu
screen.
3-31
Download from Www.Somanuals.com. All Manuals Search And Download.
TEXT STAMP
The text stamp functions include the following functions. These functions are selected by pressing the “TEXT
●
Date: Adds the current date to the copies.
STAMP” key on the SPECIAL MODES screen and then
●
Select stamp: Adds a selected stamp to the copies. selecting from the “TEXT STAMP” menu.
●
The stamp will be printed in white on a shaded
background.
These functions will not work when non-standard size
paper is used.
●
●
●
●
●
Watermark:Addsaselectedwatermarktothecopies.
The watermark will be printed in gray tone.
Page number: Adds page numbers to the copies.
Multiple text stamp functions can be selected at the
same time except for SELECT STAMP and
WATERMARK. These functions cannot be selected
together.
If the printed text stamp is located on the copy image,
part of the copy image will be covered except for
watermark. Part of watermark may be covered with
the copy image.
The size of printed characters is fixed.
Thesizewillnotvaryeveninreductionorenlargement
copying.
DATE
TheDATEfunctionaddsthecurrentdatetothecopies.Thedatewillbe
printed at the upper right of the copies.
●
If reduction or enlargement is used with this function, the print
position may move or the date may not be printed.
★ KEY OPERATOR To use the DATE function, set the current date and
time. Seepage8-19. Theinitialsettingofthedateformatcanbechanged.
See page 8-18.
23 March, 2000
Place the originals in the document feeder tray or on the
document glass.
1
Press the SPECIAL MODES key.
2
●
The SPECIAL MODES screen will appear.
READY TO CO
3-32
Download from Www.Somanuals.com. All Manuals Search And Download.
TEXT STAMP
Press the “TEXT STAMP” key on the touch panel.
3
4
●
The TEXT STAMP menu will appear.
READY TO COPY.
SPECIAL MODES
TEXT STAMP
READY TO COPY.
SPECIAL MODES
OK
OK
OK
DUAL PAGE
MARGIN SHIFT
MULTI SHOT
ERASE
COVERS
COPY
SELECT
DATE
TRANSPARENCY
INSERTS
STAMP
PAGE
WATERMARK
NUMBER
TEXT STAMP
PAMPHLET COPY
IMAGE EDIT
AUTO
AUTO A4
0%
CATIO
PRINT
DIRECTION
EXPOSURE
PAPER SELECT
Press the “DATE” key on the touch panel.
PECIAL MODES
EXT STAMP
OK
OK
●
The setting screen for DATE will appear.
READY TO COPY.
SELECT
STAMP
DATE
WARMARK
OK
PAGE
NUMBER
DATE
CANCEL
OK
1ST PAGE
PRINT
DIREC
ONLY
23 March, 2000
March 23, 2000
23/03/00
ALL PAGES
03/23/00
T
L
Select the desired date format on the touch panel.
L
5
6
●
The selected format will be highlighted.
●
The date formats displayed on the touch panel may be different
from the illustration above depending on the country or region.
Select the pages to be stamped.
CANCEL
OK
●
1ST PAGE
Indicate whether the date is to be printed only on the first page
ONLY
March, 2000
ch 23, 2000
23/03/00
or on all pages, by pressing the “1ST PAGE ONLY” or “ALL
PAGES” key.
ALL PAGES
03/23/00
Press the lower “OK” key.
7
●
The TEXT STAMP menu will appear again.
OK
CANCEL
OK
1ST GE
ONL
3-33
Download from Www.Somanuals.com. All Manuals Search And Download.
TEXT STAMP
Select the print direction.
SELECT
STAMP
DATE
8
9
●
If the PAMPHLET COPY function is used with this function, the
PAGE
WATERMARK
portrait orientation ( ) must be selected.
NUMBER
PRINT
DIRECTION
Press the upper “OK” key.
OK
STAMP
SELECT
DATE
STAMP
PAGE
WATERMARK
NUMBER
PRINT
DIRECTION
Make all other desired copier selections and enter the
desired number of copies.
INTERRUPT
2
5
8
0
3
1
4
10
6
CLEAR
7
9
PROGRAM
P
C
AUDIT CLEAR
Press the START ( ) key.
INTERRUPT
CLEAR ALL
11●
Ifthedocumentfeederisused,scanningoforiginalsandcopying
will start.
CA
●
If the document glass is used, proceed to the next step.
START
CLEAR
C
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
12
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
READ-END
●
Copying will start at this time.
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
AUTO
AUTO A4
100%
ATIO
EXPOSURE
PAPER SELECT
●
of originals larger than A4 (8-1/2" x 11") can be scanned.
●
To cancel the DATE function, select the DATE function again
and press the “CANCEL” key.
3-34
Download from Www.Somanuals.com. All Manuals Search And Download.
TEXT STAMP
SELECT STAMP
The SELECT STAMP function adds a selected stamp such as
“Confidential” and “Urgent” to the copies. The stamp will be printed in
white on a shaded background.
●
Urgent
The stamps which can be selected are: “Confidential”, “Urgent”,
“Copy”, “Preliminary”, “Draft”, and “Final”.
●
The darkness of the shaded background can be adjusted in three
levels.
●
The print position can be selected from six positions.
●
If reduction or enlargement is used with this function, the print
position may move or the stamp may not be printed.
Place the originals in the document feeder tray or on
the document glass.
1
Press the SPECIAL MODES key.
2
●
The SPECIAL MODES screen will appear.
READY TO CO
Press the “TEXT STAMP” key on the touch panel.
READY TO COPY.
SPECIAL MODES
3
4
●
The TEXT STAMP menu will appear.
OK
DUAL PAGE
MARGIN SHIFT
MULTI SHOT
ERASE
COVERS
COPY
TRANSPARENCY
INSERTS
TEXT STAMP
PAMPHLET COPY
IMAGE EDIT
AUTO
AUTO A4
0%
CATIO
Press the “SELECT STAMP” key on the touch panel.
EXPOSURE
PAPER SELECT
●
The setting screen for SELECT STAMP will appear.
READY TO COPY.
PECIAL MODES
EXT STAMP
OK
OK
OK
SELECT STAMP
CANCEL
OK
SELECT
STAMP
DATE
WATERMARK
1ST PAGE
Confidential
Urgent
ONLY
GE
Copy
Preliminary
Final
NBER
Draft
ALL PAGES
PRINT
DIRECTION
OPTION
3-35
Download from Www.Somanuals.com. All Manuals Search And Download.
TEXT STAMP
Select the desired stamp to be printed.
5
6
7
●
The selected stamp will be highlighted.
1
O
A
Select the pages to be stamped.
CANCEL
OK
1ST PAGE
●
Indicate whether the stamp is to be printed only on the first page
Urgent
ONLY
or on all pages, by pressing the “1ST PAGE ONLY” or “ALL
PAGES” key.
Preliminary
Final
ALL PAGES
ON
Confidential
Urgent
O
To adjust the exposure and print position, press the
“OPTION” key. Otherwise, proceed to step 10.
Copy
Preliminary
Final
Draft
●
The following screen will appear.
A
OPTION
READY TO COPY.
OK
SELECT STAMP
DARKNESS
CANCEL
POSITION
OK
SELECT STAMP
CANC
O
Adjust the darkness of the background of the stamp.
8
9
●
Press the
key to darken or the
key to lighten.
Select the stamp position.
MP
ESS
CANCEL
POSITION
OK
●
The selected position will be highlighted.
●
To return to the previous screen, press the
key.
3-36
Download from Www.Somanuals.com. All Manuals Search And Download.
TEXT STAMP
Press the lower “OK” key.
10●
The TEXT STAMP menu will appear again.
OK
OK
CANCEL
POSITION
SELECT
STAMP
DATE
Select the print direction.
11●
If the PAMPHLET COPY function is used with this function, the
portrait orientation ( ) must be selected.
PAGE
WATERMARK
NUMBER
PRINT
DIRECTION
Press the upper “OK” key.
OK
K
12
SELECT
DATE
WATERMARK
STAMP
PAGE
NUMBER
TION
Make all other desired copier selections and enter the
desired number of copies.
CLEAR ALL
INT
2
5
8
0
3
6
1
4
13
CA
Press the START ( ) key.
14●
START
Ifthedocumentfeederisused,scanningoforiginalsandcopying
will start.
7
9
PROGRAM
P
●
If the document glass is used, proceed to the next step.
AUDIT CLEAR
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
15
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
READ-END
●
Copying will start at this time.
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
AUTO
EXPOSURE
AUTO A4
100%
ATIO
PAPER SELECT
●
of originals larger than A4 (8-1/2" x 11") can be scanned.
●
To cancel the SELECT STAMP function, select the SELECT
STAMP function again and press the “CANCEL” key.
3-37
Download from Www.Somanuals.com. All Manuals Search And Download.
TEXT STAMP
WATERMARK
The WATERMARK function adds a selected watermark such as
“Confidential”and“Urgent”tothecopies.Thewatermarkwillbeprinted
in gray tone at the centre of copies.
●
Thewatermarkswhichcanbeselectedare:“Confidential”,“Urgent”,
Draft
“Copy”, “Preliminary”, “Draft”, and “Final”.
Draft
●
The darkness of the watermark can be adjusted in two levels.
Place the originals in the document feeder tray or on the
document glass.
1
Press the SPECIAL MODES key.
2
3
●
The SPECIAL MODES screen will appear.
READY TO CO
Press the “TEXT STAMP” key on the touch panel.
READY TO COPY.
SPECIAL MODES
●
The TEXT STAMP menu will appear.
OK
DUAL PAGE
MARGIN SHIFT
MULTI SHOT
ERASE
COVERS
COPY
TRANSPARENCY
INSERTS
TEXT STAMP
PAMPHLET COPY
IMAGE EDIT
AUTO
AUTO A4
0%
CRATIO
EXPOSURE
PAPER SELECT
3-38
Download from Www.Somanuals.com. All Manuals Search And Download.
TEXT STAMP
Press the “WATERMARK” key on the touch panel.
PECIAL MODES
EXT STAMP
OK
OK
4
●
The setting screen for WATERMARK will appear.
READY TO COPY.
SELECT
STAMP
DATE
OK
PAGE
WATERMARK
NUMBER
WATERMARK
CANCEL
OK
1ST PAGE
Confidential
Urgent
PRINT
ONLY
DIRECTIO
Copy
Preliminary
Draft
Final
ALL PAGES
WATERMARK
CANCEL
OPTION
1
O
Confidential
Copy
Urgent
Preliminary
Final
Select the desired watermark to be printed.
Draft
5
6
●
A
The selected watermark will be highlighted.
ON
Select the pages to be printed with the watermark.
CANCEL
OK
●
1ST PAGE
Indicate whether the watermark is to be printed only on the first
pageoronallpages,bypressingthe“1STPAGEONLY”or“ALL
PAGES” key.
Urgent
ONLY
Preliminary
Final
ALL PAGES
N
Confidential
Urgent
To adjust the exposure, press the “OPTION” key.
Otherwise, proceed to step 9.
Copy
Preliminary
7
●
The following screen will appear.
Draft
Final
OPTION
READY TO COPY.
OK
WATERMARK
CANCEL
OK
DARKNESS
TERMARK
CANCEL
OK
DARKNESS
Adjust the darkness of the watermark.
8
●
Press the
key to darken or the
key to lighten.
key.
●
To return to the previous screen, press the
3-39
Download from Www.Somanuals.com. All Manuals Search And Download.
TEXT STAMP
Press the lower “OK” key.
9
●
The TEXT STAMP menu will appear again.
OK
CANCEL
OK
SELECT
STAMP
DATE
WATERMARK
Select the print direction.
PAGE
10●
If the PAMPHLET COPY function is used with this function, the
portrait orientation ( ) must be selected.
NUMBER
PRINT
DIRECTION
Press the upper “OK” key.
11
OK
SELECT
STAMP
DATE
PAGE
WATERMARK
NUMBER
Make all other desired copier selections and enter the
desired number of copies.
CLEAR ALL
INT
2
5
8
0
3
6
1
4
12
CA
Press the START ( ) key.
START
13●
Ifthedocumentfeederisused,scanningoforiginalsandcopying
will start.
7
9
PROGRAM
P
●
If the document glass is used, proceed to the next step.
AUDIT CLEAR
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
14
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
READ-END
●
AUTO
AUTO A4
100%
ATIO
Copying will start at this time.
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
EXPOSURE
PAPER SELECT
●
of originals larger than A4 (8-1/2" x 11") can be scanned.
●
TocanceltheWATERMARKfunction,selecttheWATERMARK
function again and press the “CANCEL” key.
3-40
Download from Www.Somanuals.com. All Manuals Search And Download.
TEXT STAMP
PAGE NUMBER
The PAGE NUMBER function adds page numbers to the copies.
●
The page number format can be selected from three types.
●
The page number print position is automatically selected depending on
the selected page number format.
●
If reduction or enlargement is used with this function, the print position
may move or the page numbers may not be printed.
-1-
1/5
1
Place the originals in the document feeder tray or on the
document glass.
1
Press the SPECIAL MODES key.
2
●
The SPECIAL MODES screen will appear.
READY TO CO
Press the “TEXT STAMP” key on the touch panel.
READY TO COPY.
SPECIAL MODES
3
●
The TEXT STAMP menu will appear.
OK
DUAL PAGE
MARGIN SHIFT
MULTI SHOT
ERASE
COVERS
COPY
TRANSPARENCY
INSERTS
TEXT STAMP
PAMPHLET COPY
IMAGE EDIT
AUTO
AUTO A4
0%
CATIO
EXPOSURE
PAPER SELECT
3-41
Download from Www.Somanuals.com. All Manuals Search And Download.
TEXT STAMP
Press the “PAGE NUMBER” key on the touch panel.
PECIAL MODES
EXT STAMP
OK
OK
4
●
The setting screen for PAGE NUMBER will appear.
READY TO COPY.
SELECT
STAMP
DATE
OK
PAGE
WATERMARK
NUMBER
PAGE NUMBER
CANCEL
OK
FIRST PAGE
PRINT
NUMBER
DIRECTION
-1-,-2-,-3-..
1/5,2/5,3/5..
1,2,3....
(0~)
1
OK
OK
GE NUMBER
CANCEL
FIRST PAGE
Select the desired page number format.
NUMBER
-1-,-2-,-3-..
5
6
●
The selected page number format will be highlighted.
1/5,2/5,3/5..
1,2,3....
1
OK
Select the starting page number.
●
Use the
number.
or
key to increment or decrement the page
CANCEL
OK
FIRST PAGE
NUMBER
●
If the page number format “1/5, 2/5, 3/5..” has been selected in
step 5, the starting page number is fixed to 1 and cannot be
changed.
-1-,-2-,-3-..
1/5,2/5,3/5..
1,2,3....
(0~)
1
Press the lower “OK” key.
OK
OK
7
8
●
The TEXT STAMP menu will appear again.
CANCEL
FIRST E
NUMBE
-1-,-2-,-3-..
1/5,2/5,3/5..
1,2,3....
SELECT
STAMP
Select the print direction.
DATE
●
If the PAMPHLET COPY function is used with this function, the
PAGE
WATERMARK
NUMBER
portrait orientation ( ) must be selected.
PRINT
DIRECTION
3-42
Download from Www.Somanuals.com. All Manuals Search And Download.
TEXT STAMP
Press the upper “OK” key.
OK
O
9
EXT STAMP
SELECT
STAMP
DATE
PAGE
WATERMARK
NUMBER
PRINT
DIRECTION
Make all other desired copier selections and enter the
desired number of copies.
CLEAR ALL
INT
2
5
8
3
6
1
4
7
10
CA
Press the START ( ) key.
START
11●
Ifthedocumentfeederisused,copyingwillstartafteralloriginals
are scanned.
9
PROGRAM
P
●
If the document glass is used, proceed to the next step.
AUDIT CLEAR
0
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned. Then, press the “READ-END” key
on the touch panel.
12
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
READ-END
●
Copying will start at this time.
Up to 120 sheets of A4 (8-1/2" x 11") originals or up to 60 sheets
AUTO
EXPOSURE
AUTO A4
100%
ATIO
PAPER SELECT
●
of originals larger than A4 (8-1/2" x 11") can be scanned.
●
To cancel the PAGE NUMBER function, select the PAGE
NUMBER function again and press the “CANCEL” key.
3-43
Download from Www.Somanuals.com. All Manuals Search And Download.
TANDEM COPY
If this copier is connected with another copier of the same model equipped
with the same options through the tandem-connection cable (AR-CA1),
copying with the two machines can be performed eventually making the
total copy time for multiple copies one-half of the case when using a single
copier.
●
A dedicated tandem-connection cable AR-CA1 is required for tandem
copying.
●
The tandem copying can be used only in the sort mode or staple sort
mode. The group mode cannot be selected.
The transparency inserts function cannot be used with this function
●
because the number of copies must be 1 when the transparency inserts
function is used.
TheTANDEMCOPYkeywillonlybedisplayedonthetouchpanelofthe
●
machinesetasthemaincopier,(anauthorisedSharpServiceTechnician
will do the setting of the main and sub copiers at the time of installation).
When the tandem function is selected, (only available on the main
copier) the other will then become the sub copier.
The setting procedure is described below.
●
INTERRUPT will not function during tandem copying.
●
The tandem copying function is not available for the AR-287.
Ensure that the two copiers are connected through the
tandem-connection cable and they have been turned
on.
1
2
On the copier that will be set as the main copier, place
the originals in the document feeder tray or on the
document glass.
Press the SPECIAL MODES key.
3
●
The SPECIAL MODES screen will appear.
READY TO CO
Press the “TANDEM COPY” key on the touch panel.
READY TO COPY.
SPECIAL MODES
4
●
The “TANDEM COPY” key will be highlighted.
OK
DUAL PAGE
MARGIN SHIFT
MULTI SHOT
ERASE
COVERS
COPY
TRANSPARENCY
INSERTS
TANDEM
PY
TEXT STAMP
IMAGE EDIT
A
AUTO
A4
100%
COPY RATIO
EXPE
PAPER SELECT
3-44
Download from Www.Somanuals.com. All Manuals Search And Download.
TANDEM COPY
Press the “OK” key.
5
6
OK
DUAGE
C
TRANSPAY
INSE
Make all other desired copier settings and enter the
number of copies.
INTERRUPT
2
5
8
0
3
6
1
4
●
Thefunctionsselectedonthemaincopierwillbeusedbybothcopiers.
(1) Thekeyoperatorprogramsofwhichsettingsatthemaincopier
aregivenpriority(thesettingsatthesubcopieraredisregarded):
CLEAR
7
9
PROGRAM
P
Exposure Adjustment, Toner Save Mode, Initial Margin Shift,
EraseWidthAdjustment,InitialStatusSetting,StaplePosition
Setting, Date Format Setting, Date and Time Adjustment and
Disabling of Covers Mode.
C
AUDIT CLEAR
(2) The key operator programs for which the same settings
between the main and sub copiers are required:
Disabling of Duplex Copying and Disabling of Stapler.
(3) Thekeyoperatorprogramthatcanonlybesetatthemaincopier:
Disabling of Auto Paper Selection.
(4) In case of the other key operator programs than mentioned
above, different settings on the main and sub copiers
respectively do not matter even when the tandem copying is
activated.
Ensure that paper of the same size selected in the main
copier is installed in the sub copier.
7
8
●
Paper of the same size and same orientation must be installed
in the two copiers. Even if the image of the original is rotated to
match the copy paper in the main copier, the orientation of the
copy paper in the sub copier must be the same as that in the
master copier.
On the main copier, press the START ( ) key.
INTERRUPT
CLEAR ALL
●
Imagesscannedbythemaincopierwillbestoredinbothcopiers.
CA
Half the number of copies selected will be made simultaneously
onbothcopiers.Whenthenumberofcopiesselectedisodd,one
more copy will be made on the main copier than the sub copier.
START
●
If the message “CHECK THE SUB MACHINE.” appears on the
CLEAR
mainmachine, anerrorhasoccurredinthesubmachine. Check
the message on the sub machine and clear the error.
C
●
If the message “THE SYSTEM IS NOT CONFIGURED TO
PERFORM TANDEM JOB. CODE: XX” appears on the main
machine, refer to the tandem copy related descriptions in the
TROUBLESHOOTING (see page 5-13).
●
●
CA
To cancel a copy run after starting, press the CLEAR ALL (
key on the main copier.
)
To cancel the TANDEM copying, press the “TANDEM COPY”
key again on the SPECIAL MODES screen of the main copier.
3-45
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING REVIEW
The current settings of copier functions can be displayed on the touch
panel.
Press the REVIEW (
) key.
1
●
The REVIEW screen will appear.
The settings of the duplex mode (1-sided to 1-sided, etc.), sort/
group mode, and special functions will be displayed. The
exposure, paper size, and copy ratio which are displayed on the
basic screen will not be displayed on the REVIEW screen.
100%
COPY RATIO
Example
EXIT
REVIEW
1-SIDED COPIES OF 1-SIDED
ORIGINALS
STAPLE SORT
1/2
SIDE 1
MARGIN SHIFT :
SIDE 2
10 mm
10 mm
2inl
MULTI SHOT
:
NO BORDER
Confidential
SELECT STAMP :
1ST PAGE ONLY
To review all setting information, it may be necessary to
scroll between review screens. To scroll between
IDED COPIES OF 1-SIDED
GINALS
PLE SORT
2
3
screens, use the
or
key.
1/2
SIDE 1
HIFT :
SIDE 2
10 mm
10 mm
2inl
OT
:
NO BORDER
Confidential
TAMP :
1ST PAGE ONLY
To exit the review screen, press the “EXIT” key.
EXIT
●
The basic screen will appear again.
ED COPIES OF 1-SIDED
NALS
E SORT
SIDE 1
SIDE 2
10
FT :
10 mm
2inl
:
NO BORDER
3-46
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 4
SUPPLIES
This chapter describes the supplies for this copier such as paper and
toner.
Page
●
PAPER ......................................... 4-2
Types and sizes of copy paper ......................... 4-2
Loading copy paper ................................ 4-2
●
ADDING TONER .................................. 4-5
●
USEDTONER DISPOSAL ........................... 4-7
●
STORAGE OF SUPPLIES ........................... 4-8
4-1
Download from Www.Somanuals.com. All Manuals Search And Download.
PAPER
Types and sizes of copy paper
Size
Weight
Capacity
Special paper
(80 g/m2 (21lb.)
paper)
Paper trays
1 and 2
A5 to A3
(5-1/2" x 8-1/2"
to 11" x 17")
56 to 105 g/m2
(15 lbs. to 28 lbs.)
500 sheets
50 sheets
Bypass tray
A6 to A3
52 to 128 g/m2
Transparency film, labels,
tracing paper, 176 g/m2
(65 lb. paper)**, (200 g/m2
(110 lb. paper)**
(5-1/2" x 8-1/2"
to 11" x 17")
(14 lbs. to 34 lbs.)*
(Ordinary paper)
●
For best results, use only paper recommended by SHARP.
* For paper weighing from 105 to 128 g/m2 (28 to 34 lbs.), A4 (8-1/2"
x 11") is the maximum size that can be fed through the bypass tray.
** Paper heavier than 128 g/m2 (34 lbs.) must be fed narrow side into the
feed slot of the bypass tray.
Loading copy paper
“OPEN TRAY AND ADD PAPER.” will be displayed when there is
no copy paper in a selected paper feed station.
When a selected paper tray is not installed or is improperly installed,
“PUSH PAPER TRAY
INTO THE MACHINE UNTIL IT
LATCHES.” will be displayed. Install it or push it back firmly into
place.
For best results, use only Sharp recommended paper.
4-2
Download from Www.Somanuals.com. All Manuals Search And Download.
PAPER
Loading paper in paper trays 1 and 2
Gently lift and pull out the paper tray.
1
Only use paper within the Sharp specification and
follow the paper manufacturer’s instructions regarding
fanning and loading the paper.
2
●
The tray holds 500 sheets of paper.
Maximum height line
Do not load paper above the maximum height line.
Push the paper tray firmly back into the copier.
3
4-3
Download from Www.Somanuals.com. All Manuals Search And Download.
PAPER
Changing the copy paper size in the tray
Gently lift and pull out the paper tray until it stops.
1
Adjust the paper size indicator to match the paper size
to be set.
2
3
4
●
Slidethepapersizeindicatortotherightorlefttomatchthepaper
size.
Paper size indicator
Adjust the front guide and left guide while squeezing
their lock levers.
●
Slidethefrontandleftguidestomatchthewidthandlengthofthe
copy paper.
Left guide
Front guide
Load copy paper into the tray.
Maximum height line
Place the paper size card in the front of the paper tray.
2 1 6 x 3 3 0
5
6
●
The paper size card has three faces. Fold the card properly to
B5
show the selected paper size. The paper size indication which
showsthroughtheslotonthefrontofthecopiershouldmatchthe
selected paper size.
A 4
A3
x 1 1 8
Push the paper tray firmly back into the copier.
Paper size
card
A5
4-4
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDING TONER
The message “(TONER SUPPLY IS LOW. PRESS
FOR
For best copying results, be sure to use
only Sharp products. The package of
Sharp toner has the Genuine Supplies
label.
GUIDANCE.)” will appear in the message display before the toner
supply is completely empty. If copying is continued, copies will
gradually become lighter until the copier stops and the message
display changes to “ADD TONER. PRESS
indicatingthatthetonersupplyisempty. Tonercanbeaddedanytime
after the message “(TONER SUPPLY IS LOW. PRESS FOR
FOR GUIDANCE.”
GUIDANCE.)” appears. To add toner, stop the copier and proceed as
below.Wheneither messageappears,youcanusetheINFORMATION
(
) key for detailed information as necessary.
During long copy runs of multiple originals containing many images
and/or dark shades, “TONER REPLENISHMENT IN PROGRESS.” will
appearandthecopierwillstopmakingcopieseventhoughtonerisleft.
The copier will automatically cycle and replenish the toner to the
normallevelandthentheSTART( )keyindicatorwilllightup. Press
the START ( ) key to resume copying.
GENUINE SUPPLIES
Open the front cover.
1
Pull down the toner hopper lock lever and pull the toner
hopper out slowly until it stops.
2
3
Tap on the top of the toner cartridge 5 times. Hold the
new toner cartridge vertically and vigorously shake it
up and down about 20 times, then invert the cartridge
and again shake it up and down about 20 times. This will
loosen the toner and allow it to flow more easily into the
toner hopper.
5X
20X
20X
●
Whenanycautionlabelisattachedtothenewtonercartridge,read
it carefully and remove it.
4-5
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDING TONER
Place the new toner cartridge with the tabs in the
notches as shown.
4
5
6
7
Slide the toner cartridge along the guides over the toner
hopper.
Hold the toner cartridge with one hand while pulling on
the sealing tape to remove it.
Sealing tape
Tap on the top of the toner cartridge 5 times to start the
flow of toner into the toner hopper.
●
Ifthetonercartridgewassufficientlyshakenasdescribedinstep
3, itwilltakeabout50secondsforthecartridgetoempty. Donot
removethecartridgeuntilitisempty. Ifnotempty, taponthetop
of the cartridge again until empty.
Slide the empty toner cartridge back along the guides
and remove it.
8
9
●
The cartridge opening will be closed as it is moved back along
the guides.
Slide the toner hopper into the copier and return the
toner hopper lock lever into place.
Close the front cover.
10 NOTE:
Add only one cartridge of toner.
4-6
Download from Www.Somanuals.com. All Manuals Search And Download.
USED TONER DISPOSAL
“REPLACEUSEDTONERCONTAINER.PRESS FORGUIDANCE.”
will appear when the toner collecting container is full.
Thecopierwillstopandwillnotoperateuntilanewcontainerhasbeen
installed. Replace the toner collecting container as described below.
Whentheabovemessageisdisplayed,youcanusetheINFORMATION
(
) key for detailed information as necessary.
Open the toner collecting container cover.
1
2
●
Push once on the door to unlatch and open it.
Disengage and remove the container from the copier.
●
Toner cannot be reused. Do not transfer used toner to the toner
hopper.
●
Remove the cap from a new toner collecting container and use
it to cover the full toner collecting container.
●
Keep the full toner collecting container until the next regular
service call. Your authorised Sharp Service Technician will
collect the container for disposal.
Installanewtonercollectingcontaineruntilitclicksinto
place.
3
4
Close the toner collecting container cover.
4-7
Download from Www.Somanuals.com. All Manuals Search And Download.
STORAGE OF SUPPLIES
The supplies of this copier replaced by the user include copy paper,
toner, toner collecting container, and staple cartridges for the optional
finishers (AR-FN1N, AR-FN2).
For best copying results, be sure to use
only Sharp products. The package of
Sharp toner has the Genuine Supplies
label.
GENUINE SUPPLIES
Photoconductive drum
TheAR-287/AR-337/AR-407Copiershaveadvancedprocesscontrol
technology which improves copy quality uniformity. This feature
stabilizes copy quality throughout the life of the photoconductive
drumbyautomaticallycompensatingforthechangesindrumcharac-
teristics due to wear, operator use patterns, and environmental
conditions. The automatic adjustments are made in response to a
sensor that detects the reflectance characteristics of the drum.
WARNING
This feature requires drums containing the special reflectance area
(recommended Sharp genuine photoconductive drum), to prevent
low image density copies from poor process control and possible
damage to the machine. If you use other drums, the process control
system cannot run properly.
Proper storage
Store the supplies in a location that is:
1
●
●
●
clean and dry,
at a stable temperature,
not exposed to direct sunlight.
Store copy paper in the wrapper and lying flat.
2
●
Paperstoredinpackagesstandinguporoutofthewrappermay
curl or become damp, resulting in paper misfeeds.
4-8
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5
COPIER TROUBLE?
This chapter describes how to remove misfed originals and paper and
other common trouble remedies.
Page
●
MISFEED REMOVAL ............................... 5-2
●
MAINTENANCE REQUIRED ........................ 5-11
●
TROUBLESHOOTING ............................. 5-12
5-1
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
When a misfeed occurs, the copier will stop.
If paper becomes accidentally torn during removal, be
The message “A MISFEED HAS OCCURRED. CLEAR
sure to remove all pieces. Be careful not to damage the
photoconductive drum or the corona wires.
INDICATED AREA. PRESS
FOR RECOVERY
INSTRUCTIONS.” will appear with a display of paper
misfeed locations. Press the INFORMATION ( ) key
for more detailed information as necessary.
First confirm the misfeed locations.
Formisfeedsinoptionalequipment,seetheirrespective
sections. (pages 7-14, 7-28, 7-32, and 7-36)
(
P. 5-3)
(
(
P. 5-6)
P. 5-7)
(
(
P. 5-4)
P. 5-5)
(
P. 5-9)
5-2
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
A MISFEED HAS OCCURRED.
Misfeed in the RADF
WhentheRADFmisfeedsanoriginalsheet,thecopierwillstopandthe
misfeed message will appear.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
An original misfeed may occur at one of three locations:
(A) in the RADF feed section, (B) in the exit roller, or (C)
under the transport belt.
A
C
B
(A) Openthefeedingrollercoverandpulltheoriginalgently
to the right and out from the document feeder tray.
Feeding roller cover
●
Be sure to open and close the document feeder cover to cancel
the misfeed display.
(B) Open the exit roller cover and gently pull the original
out.
●
Be sure to open and close the document feeder cover to cancel
the misfeed display.
Exit roller cover
(C) Open the feeding roller cover and the document feeder
cover, and remove the original.
NOTE:
After misfed originals are removed from locations A, B and/or C, a
message may appear indicating the number of originals which
must be returned to the document feeder tray. Return the originals
and press the START ( ) key to resume copying.
5-3
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
A MISFEED HAS OCCURRED.
Misfeed in the bypass tray
CLEAR INDICATED AREA.
PRESS
FOR RECOVERY INSTRUCTIONS.
Gently pull the misfed paper out.
1
Open and close the front cover to cancel the misfeed
display.
2
5-4
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
Misfeed in paper trays 1 and 2
A MISFEED HAS OCCURRED.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
Open the right side cover.
1
2
3
●
Hold the handle and gently open the cover.
●
Ifanypaperissetinthebypasstray,removethepaperandclose
the bypass tray before opening the right side cover.
Remove the misfed paper.
●
Be careful not to tear the misfed paper during removal.
If the paper cannot be seen from the side, pull out the
paper tray which was in use and remove the misfed
paper.
●
Be careful not to tear the misfed paper during removal.
NOTE:
When the paper was misfed in tray 2 and the paper has dropped
beyond the tray, remove the tray and remove the misfed paper. To
remove the paper tray, pull the paper tray out until it stops and then
lift and remove the paper tray.
Close the paper tray and the side cover.
4
5
Open and close the front cover to cancel the misfeed
display.
●
Confirm that the misfeed display is cleared.
5-5
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
A MISFEED HAS OCCURRED.
Misfeed in the transport area
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
Open the front cover.
1
Remove the misfed paper.
Transport lever
2
1
Turn the transport lever to the left.
CAUTION
The area behind the transport lever is hot.
Use sufficient care in handling this lever.
A
Turn roller rotating knob
remove the misfed paper.
in the direction of the arrow to
2
Roller rotating knob A
●
Push down the paper guide and remove any misfed paper.
Paper guide
5-6
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
3
Turn the transport lever back into place.
Transport lever
Close the front cover.
3
●
Confirm that the misfeed display is cleared.
A MISFEED HAS OCCURRED.
Misfeed around the fusing unit and exit area
NOTE:
If an optional finisher (AR-FN1N) is fitted, please refer to chapter 7
Optional Equipment for additional misfeed removal help.
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
Open the front cover.
1
Open the exit area cover carefully.
2
5-7
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
Remove the misfed paper.
3
If the misfed paper is in the inner part of the exit area:
1
Turn roller rotating knob
remove the paper.
B
in the direction of the arrow and
Roller rotating knob B
2
If the misfed paper is deep in the fusing unit, lift the fusing unit
tab and remove any misfed paper.
Fusing unit tab
CAUTION
The fusing unit is hot! Be sure to touch only the green tab or the
green roller rotating knob.
If the misfed paper is in the exit area:
1
Turn roller rotating knob
remove the paper.
in the direction of the arrow and
C
Roller rotating knob C
1
2
If the misfed paper cannot be removed in step
area lever and remove the paper.
, raise exit
C
Exit area lever C
Close the exit area cover.
4
5-8
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
Close the front cover.
5
●
Confirm that the misfeed display is cleared.
A MISFEED HAS OCCURRED.
Misfeed in the duplex module
NOTE:
If the optional finishers (AR-FN1N, AR-FN2) is fitted, please refer to
chapter 7 Optional Equipment for additional misfeed removal help.
CLEAR INDICATED AREA.
Ifthemisfedpaperisintheduplexmoduleorthesectionbelowthe
exit area:
PRESS
FOR RECOVERY INSTRUCTIONS.
Open the exit area cover carefully.
1
Remove the misfed paper.
2
Paper
guide
1
D
Open the paper guide, turn roller rotating knob
direction of the arrow and remove the misfed paper.
Close the paper guide.
in the
Roller rotating knob D
2
Remove any misfed paper from the duplex module.
●
Be careful not to tear the misfed paper during removal.
5-9
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
3
Removethemisfedpaperfromthesectionbelowtheexitarea.
Close the exit area cover.
3
4
Open and close the front cover to cancel the misfeed
display.
If the misfed paper is in the right side of the duplex module:
Open the right side cover.
1
2
●
Hold the handle and gently open the cover.
●
Ifanypaperissetinthebypasstray,removethepaperandclose
the bypass tray before opening the right side cover.
Remove the misfed paper.
Paper feed area open/close lever
●
Openthepaperfeedareaopen/closeleverinthedirectionofthe
arrow and remove the misfed paper.
Close the right side cover.
3
4
Open and close the front cover to cancel the misfeed
display.
●
Confirm that the misfeed display is cleared.
5-10
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE REQUIRED
Whenthemessage“READYTOCOPY.(MAINTENANCEREQUIRED)”
appears in the message display, service by an authorised Sharp
ServiceTechnicianwillberequiredsoon.ContactyourServiceCentre
as soon as possible.
5-11
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Always check the message display whenever the copier stops or
operation is not possible. The messages will give you easy-to-follow
directions. Ifthemessagesdonotgivespecific instructions, checkthe
list below.
Problem
Solution
●
Plug the copier into a grounded outlet.
Copier plugged in?
Copier does not operate.
●
●
Turn the power switch on.
See page 2-16.
Power switch on?
Copy density properly adjusted?
Copies are too dark or too
light.
Place the original face up in the
document feeder tray or face down on
the document glass.
●
Istheoriginalplacedfaceupinthe
documentfeedertrayorfacedown
on the document glass?
Blank copies.
Use copy paper within the specified
range. See page 4-2.
●
●
Paper too heavy?
Paper damp?
Copies smear if rubbed.
Replace with dry copy paper. Be sure
to store copy paper in a dry location.
When changing the copy paper size in
a tray, be sure to adjust the paper size
indicator. See page 4-4.
●
●
Paper size indicator properly set?
Non-standard paper used?
Copy size is different from
the selected paper size.
Use standard paper.
If using special papers, feed the paper
through the bypass tray.
See pages 2-14 and 4-2.
●
Is paper properly installed?
Paper misfeeds frequently.
Remove all pieces of misfed paper.
See page 5-2.
●
●
Pieces of paper inside copier?
Paper curled or damp?
Store copy paper flat in the wrapper in
a dry location. See page 4-8.
5-12
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Problem
Solution
●
●
●
Document glass, RADF transport
belt dirty?
Clean regularly. See page 6-6.
Dust, dirt, smudges appear
on copies.
Is LCD contrast properly
adjusted?
Touch panel is too dark or
too light.
Adjust the LCD contrast.
See page 6-7.
Some message appears on the
touch panel of the sub copier?
Follow the message on the sub copier
to solve the problem.
“CHECK THE SUB
MACHINE.” message
appears and the tandem
copying does not start.
●
●
The same options are equipped
for the main and sub copiers?
Tandemcopyingisnotperformedunless
thesameoptionsareequippedforboth
main and sub copiers.
“THE SYSTEM IS NOT
CONFIGURED TO PERFORM
TANDEM JOB. CODE: XX”
message appears and the
tandem copying can not be
performed.
The settings in the following key
operator programs are different
on the main and sub copiers:
Tandemcopyingisnotperformedunless
the settings in these key operator
programs are the same on both main
and sub copiers.
* Disabling of Duplex Copying
(error code No. 51)
* Disabling of Stapler (error
code No. 52)
* Disabling of Bypass-Tray
When Offset Tray Selected
(error code No. 53: only with
AR-FN2)
Ifaproblempersistsaftercheckingtheabove,pleaseconsultyourkey
operator prior to contacting your authorised Sharp Service Centre.
Self-diagnostic function
Anautomaticself-diagnosticfunctionisbuiltintothiscopier.Shouldthe
copiermalfunction, theself-diagnosticfunctionwilllocatetheproblem
and stop the copier to prevent damage. An alphanumeric code will
appear in the message display.
Example
Should the copier stop completely, and the message “CALL FOR
SERVICE. CODE: ” appear in the message display, contact your
authorised Sharp Service Centre.
★ KEY OPERATOR See page 8-29.
5-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6
GENERAL INFORMATION
This chapter describes general information for using this copier.
Page
●
PART NAMES AND FUNCTIONS ...................... 6-2
Exterior ......................................... 6-2
Interior .......................................... 6-3
Operation panel ................................... 6-4
Touch panel (Basic screen) ........................... 6-5
USER MAINTENANCE.............................. 6-6
TOUCH PANEL CONTRAST ADJUSTMENT .............. 6-7
SPECIFICATIONS ................................. 6-8
●
●
●
6-1
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES AND FUNCTIONS
Exterior
Exit area cover
RADF exit area
Open to remove misfed paper.
Finished originals are output here.
Power switch
RADF exit roller cover
Press to turn copier power on and off.
Open to remove misfed originals.
Exit tray (optional)
Paper trays
Finished copies are deposited in the exit tray.
Each tray holds 500 sheets of paper.
Operation panel
Front cover
All copier controls are located here for easy
operation.
Open to remove misfeeds and to service the
copier.
Document feeder indicators
Original feed indicator
Indicates the originals in the tray will be fed.
Original reminder
Handles
Right side cover
Open to remove misfeeds in the paper feed area.
Indicates an original is still on the document glass.
Toner collecting container cover
Open to replace the toner collecting container.
RADF feeding roller cover
Open to remove misfed originals.
Document glass
All originals which cannot be copied from the
RADF must be copied here.
Original guides
Adjust to the size of the originals.
Paper clip tray
Keep paper clips here.
Document feeder tray
Holds up to 50 originals.
6-2
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES AND FUNCTIONS
Interior
Paper guide
Bypass tray paper guides
Push down to remove misfed paper.
Adjust to the width of the copy paper.
Bypass tray
Special papers (including transparency film) and
copy paper can be fed from the bypass tray.
Fusing unit
The fusing unit is hot. Exercise care in this area.
Transport lever
Turn to open the transport section.
Photoconductive drum
Copy images are formed on the photoconductive
drum.
Accessories
Corona unit
The unit is used to charge the photoconductive
drum.
Operation manual . . . . . . . . . . . . . . . . . . . . . 1
Toner collecting containers
(including 1 pre-installed at the factory) . . . . . 3
Toner hopper
Contains toner.
Roller rotating knobs
Turn to remove misfed paper.
6-3
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES AND FUNCTIONS
Operation Panel
INTERRUPT
CLEAR ALL
1
4
2
5
8
0
3
6
CA
START
PRINT
COPY
CLEAR
7
9
PROGRAM
P
C
AUDIT CLEAR
The key and indicators
are not used for the
copier features.
LCD touch panel
START ( ) key and indicator
Copying is possible when the indicator is on.
Press to start copying.
Displays information to assist the operator.
Various operation keys are included in the touch
panel depending on the particular screen being
displayed.
SPECIAL MODES key (p.3-1)
Press to select special functions.
10-key pad
Used to set the copy quantity.
Message display
Messages are displayed regarding copier status
and operation.
INTERRUPT (
) key and indicator (p. 2-20)
Interrupts a copy run.
Function setting icons (p.1-9)
Icons appear depending on the special functions
selected.
CA
CLEAR ALL ( ) key
Clears all selected settings and returns the copier
to the initial settings.
Paper size display
COPY key
The sizes of loaded copy paper are displayed and
the selected paper feed location is highlighted.
indicates the amount of copy paper.
Press during standby to display the total output
count.
AUDIT CLEAR (
) key
Copy quantity display
Closes an open account.
Displays the specified number of copies.
Original size display
PROGRAM (
P
) key (p. 2-18)
Press to select the job memory mode.
The original paper size is displayed.
C
CLEAR ( ) key
INFORMATION ( ) key (p. 1-7)
Press for operation guidance on use of various
features of this copier.
Press to clear the copy quantity display, or press
during a copy run to terminate copying. The
copier will stop after copies in progress are
finished.
Press for guidance when a misfeed occurs, when
adding toner, or when used toner must be
disposed of.
6-4
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES AND FUNCTIONS
Touch Panel (Basic screen)
READY TO COPY.
ORIGINAL A4
A4R
1. A4
2. A3
AUTO
AUTO A4
100%
COPY RATIO
EXPOSURE
PAPER SELECT
CUSTOM SETTINGS (
) key
PAPER SELECT key
Press to set key operator programs or adjust the
contrast of the touch panel.
Press to select the desired paper tray.
COPY RATIO display
2-SIDED COPY key
Displays the copy ratios for reductions or
enlargements.
Press to select the 1-sided to 1-sided, 1-sided to
2-sided, 2-sided to 1-sided or 2-sided to 2-sided
copy mode.
COPY RATIO key
Press to select a reduction or enlargement copy
ratio or select the automatic copy ratio selection
mode.
OUTPUT key
Press to select the finisher mode: SORT or
GROUP.
REVIEW (
) key
SCAN key
Press to check the settings of selected functions.
Press to select the network scanner function.
(Optional Printer Expansion Kit and Network
Scanner Expansion Kit must be installed.)
Initial settings
The copier assumes the initial settings when the
EXPOSURE display
CA
CLEAR ALL ( ) key is pressed and approximately 1
minute after the last copy is made in any mode.
Except for the paper tray selection, the copier also
assumes the initial setting when it is turned on.
Indicates the selected exposure mode.
EXPOSURE key (p. 2-16)
●
Copy ratio: 100%
Press to select the exposure mode: AUTO,
TEXT, TEXT/PHOTO, or PHOTO.
●
Automatic exposure
●
Copy quantity: 0
●
All special copier modes are set to off.
●
Tray select: Paper tray 1 (At power on, the
PAPER SELECT display
previously selected tray will again be selected.)
Optional large capacity tray will be selected when
installed.
Displays the selected paper size. When “AUTO”
is displayed, paper size matching the original and
copy ratio will be automatically selected.
★ KEY OPERATOR
Initial settings can be
programmed as desired. The auto clear time can also
be changed. See pages 8-17 and 8-21.
6-5
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MAINTENANCE
The document glass and the document cover (RADF transport belt)
must be kept clean to avoid dirty areas from being copied onto the
copies.
Document glass and document cover
Wipe the document glass and the document cover
(RADF transport belt) with a soft, clean cloth.
●
If necessary, dampen the cloth with water. Do not use thinner,
benzene, or similar volatile cleaning agents.
6-6
Download from Www.Somanuals.com. All Manuals Search And Download.
TOUCH PANEL CONTRAST ADJUSTMENT
The contrast of the touch panel can be adjusted as below.
Press the CUSTOM SETTINGS (
) key.
1
2
3
4
Press the “DISPLAY CONTRAST” key on the touch
panel.
ETTINGS
DISPLAY
CONTRAST
KEY OPERATOR
PROGRAMS
Press the “LIGHTER” or “DARKER” key to adjust the
contrast.
TTINGS
ONTRAST
LIGHTER
DARKER
Press the “OK” key.
OK
TER
DARKER
6-7
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
COPIER
AR-287
AR-337
AR-407
Type
Desktop
Copy system
Originals
Dry, electrostatic transfer system
Sheets, bound documents
Original feed system
Reversing automatic document
feeder (RADF)
Original sizes
Copy sizes
Max. A3 (11" x 17")
Max. A3 (11" x 17"), min. A6 (5-1/2" x 8-1/2")
Image loss: Max. 5 mm (13/64") (both leading and trailing edges)
Max. 5 mm (13/64") (along all other edges in total)
For paper weight, see page 4-2.
Copying speed
(at 100% copy ratio)
28 copies/min.
(A4 (8-1/2" x 11"))
20 copies/min.
33 copies/min.
(A4 (8-1/2" x 11"))
24 copies/min.
40 copies/min.
(A4 (8-1/2" x 11"))
27 copies/min.
(A4R (8-1/2" x 11"R)) (A4R (8-1/2" x 11"R)) (A4R (8-1/2" x 11"R))
17 copies/min.
(B4 (8-1/2" x 14"))
14 copies/min.
(A3 (11" x 17"))
21 copies/min.
(B4 (8-1/2" x 14"))
17 copies/min.
(A3 (11" x 17"))
24 copies/min.
(B4 (8-1/2" x 14"))
19 copies/min.
(A3 (11" x 17"))
Continuous copy
First-copy time*
Warm-up time
Copy ratio
Max. 999 copies; subtractive counter
Approx. 5.2 sec.
4.5 sec.
75 sec.
Approx. 65 sec.
Variable: 25 to 800% in 1% increments, total
776 steps
25 to 400% in 1%
increments, total
376 steps
(can be set in the horizontal and vertical directions independently)
Fixed presets: 25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%,
141%, 200%, 400%, 800% (25%, 50%, 64%, 77%, 95%, 100%,
121%, 129%, 141%, 200%, 400%, 800%)(800% for the AR-287 and
AR-337 only)
Exposure system
Copy paper feed
Document glass: Moving optical source
(stationary platen) with automatic
exposure function
Two paper trays with automatic paper feed (500 sheets each);
one bypass tray with 50-sheet automatic feed capability
Fusing system
Developer system
Light source
Heat rollers
Magnetic brush development
Xenon lamp
Resolution
Scan: 400 dpi
Output: 600 dpi
Gradation
Scan: 256 levels
Output: 2 levels (normal copying)
Required power supply
Local voltage ±10% (For this copier’s power supply requirements,
see the name plate located on the left hand side at the rear corner of
the copier.)
* When the copier is in the noise level reduce mode, the first copy time will be several seconds longer.
6-8
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
AR-287
AR-337
AR-407
Power consumption
Overall dimensions
Max. 1.85kW
1292 mm (W) x 695 mm (D)
(50-7/8" (W) x 27-3/8" (D))
1292 mm (W) x 700 mm (D)
(50-7/8" (W) x 27-9/16" (D))
Weight
Approx. 98 kg (217 lbs.)
Copier dimensions
600 mm (W) x 695 mm (D) x 750 mm (H)
(23-5/8" (W) x 27-3/8" (D) x 29-17/32" (H))
600 mm (W) x 700 mm (D)
x 750 mm (H)
(23-5/8" (W) x 27-9/16" (D)
x 29-17/32" (H))
Operating conditions
Optional equipment
Temperature: 15°C to 30°C (59°F to 86°F)
Humidity:
20% to 85%
Finisher (AR-FN1N, AR-FN2)
Large capacity tray (AR-LC1N)
Stand/500-sheet paper drawer (AR-DE1N)
500-sheet paper drawer (AR-CS1)
Dual tray output unit (AR-TR1)
Exit tray (AR-TE1)
Tandem - connection cable (AR-CA1)
Printer expansion kit (AR-PB2A)
Printer server card (AR-NC3D)
Network scanner expansion kit (AR-NS1)
DOCUMENT FEEDER
Type
Reversing automatic document feeder
(RADF)
Acceptable originals
Single-sided originals: 50 to 128 g/m2 (14 to 34 lbs.)
Weight: Two-sided originals:
50 to 128 g/m2 (14 to 34 lbs.)
for A5 and A4 (5-1/2" x 8-1/2" and 8-1/2" x 11") originals.
50 to 110 g/m2 (14 to 29 lbs.) for B4 and A3 (8-1/2" x 14" and 11" x 17")
originals.
Size: A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Capacity: Up to 50 sheets for A5 and A4 (5-1/2" x 8-1/2" and 8-1/2" x 11") originals
provided the total aggregate thickness does not exceed 6.5 mm or 1/4"
(50 to 80 g/m2 (14 to 20 lbs.)) or 5 mm or 3/16" (80 to 128 g/m2 (21 to 34
lbs.))
Up to 30 sheets for B4 and A3 (8-1/2" x 14" and 11" x 17") originals
DUPLEX MODULE
Paper type
Ordinary paper only
Number of copies
Copy paper size
1 (trayless system)
A5, A4, A4R, B4, A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17")
Copy paper weight
56 to 105 g/m2 (15 lbs. to 28 lbs.)
Specifications are subject to change for improvement without notice.
6-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 7
OPTIONAL EQUIPMENT
ThischapterdescribesoperatinginstructionsfortheFinisher(AR-FN1N,
AR-FN2), Large Capacity Tray (AR-LC1N), Stand/500-sheet Paper
Drawer (AR-DE1N) and Dual Tray Output Unit (AR-TR1).
Page
●
SYSTEM CONFIGURATION .......................... 7-2
●
FINISHER (AR-FN1N) .............................. 7-3
Part names ...................................... 7-3
Specifications ..................................... 7-3
Offset stack ...................................... 7-4
Sort and group .................................... 7-5
Staple sort ....................................... 7-6
Staple cartridge replacement ......................... 7-10
Staple jam removal ................................ 7-12
Misfeed removal .................................. 7-14
●
FINISHER (AR-FN2)............................... 7-19
Part names ..................................... 7-19
Specifications .................................... 7-19
Offset stack ..................................... 7-20
Sort and group ................................... 7-21
Staple sort ...................................... 7-22
Staple cartridge replacement ......................... 7-26
Staple jam removal ................................ 7-27
Misfeed removal .................................. 7-28
●
LARGE CAPACITYTRAY (AR-LC1N) .................. 7-30
Part names ..................................... 7-30
Specifications .................................... 7-30
Loading copy paper ............................... 7-31
Misfeed removal .................................. 7-32
●
STAND/500-SHEET PAPER DRAWER (AR-DE1N) ........ 7-34
Part names ..................................... 7-34
Specifications .................................... 7-34
Loading copy paper ............................... 7-35
Misfeed removal .................................. 7-36
●
DUAL TRAY OUTPUT UNIT (AR-TR1) ................. 7-37
Part names ..................................... 7-37
Specifications .................................... 7-38
7-1
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM CONFIGURATION
The options which are available for this copier are shown below.
Finisher (AR-FN2)
Finisher (AR-FN1N)
Large capacity tray (AR-LC1N)
Dual tray output unit
(AR-TR1)
Exit tray
(AR-TE1)
500-sheet paper drawer (AR-CS1)
Stand/500-sheet paper drawer (AR-DE1N)
Printer expansion kit (AR-PB2A)
Printer server card (AR-NC3D)
Network scanner expansion kit (AR-NS1)
Tandem - connection cable (AR-CA1)
Data security kit 1 (AR-FR1 for the AR-287/AR-337)*
Data security kit 2 (AR-FR2 for the AR-407)*
*Theseequipmentsmaynotbeavilableinsomeregions.
7-2
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN1N)
The copier has two different finisher modes: one sorts copies into sets matching the sequence of the originals and
the second groups copies by original. When the optional finisher (AR-FN1N) is installed, the copier can
automatically staple the sorted copies. Each collated set of copies or group of copies can be stacked offset from the
previous set.
Top cover
Finisher release lever
Top tray
PART NAMES
Second tray
(not used in the copy mode)
Paper feed area cover
Paper transport area cover
Offset tray
When copying onto size A3 (11” x
17”) paper, lower the metal support
located at the tip of the offset tray.
Stapler unit
●
The top tray and second tray are each furnished with an extendable component, which is to be used when copying
onto size A3 (11” x 17”) paper.
Specifications
Tray capacity
Top tray:
500 sheets
Second tray: 500 sheets
Offset tray: 1,500 sheets (A4 (8-1/2" x 11"))
750 sheets (larger than A4 (8-1/2" x 11"))
Paper size
Top tray:
A6 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Second tray: A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Offset tray: A4 to A3 (8-1/2" x 11" to 11" x 17")
Paper weight
Top tray:
52 to 128 g/m2 (14 lbs. to 34 lbs.) (when face up)
64 to 105 g/m2 (17 lbs. to 28 lbs.) (when face down)
Second tray: 64 to 105 g/m2 (17 lbs. to 28 lbs.)
Offset tray: 64 to 128 g/m2 (17 lbs. to 34 lbs.) (when face up)
64 to 105 g/m2 (17 lbs. to 28 lbs.) (when face down)
For paper weighing more than 105 g/m2 (28 lbs.), A4
(8-1/2" x 11") is the maximum size.
Offset
30 mm (1.2 inch)
Paper size
for stapling
A4, A4R, B4, A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17")
Stapling capacity 50 sheets (80 g/m2 (21 lbs.))
(25 sheets for B4 and A3 (8-1/2" x 14" and 11" x 17") paper)
Power supply
Weight
Drawn from the copier
Approx. 50 kg (111 lbs.)
Dimensions
590 mm (W) x 560 mm (D) x 998 mm (H)
(23-15/64"(W) x 22-1/16"(D) x 39-19/64"(H))
Specifications are subject to change for improvement without notice.
7-3
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN1N)
Offset stack
In the initial setting, the offset tray will move from side to side so that
each copy set is offset by approximately 30 mm (1.2 inch).
When the offset stack function is disabled, the offset tray will not
move from side to side.
The offset stack function can be enabled or disabled by pressing the
OUTPUT key and then the “OFFSET” check mark box on the touch
panel.
When the STAPLE SORT mode is selected, the offset stack function
will be disabled.
O
The top tray cannot be used to offset copies.
To select the top tray, press the “TOP TRAY” key on the touch panel.
OFFSET mode
1
1
When copying in the SORT mode, each collated set of
copies will be stacked offset approximately 30 mm (1.2
inch) from the previous set. When copying in the GROUP
mode, copies will be offset stacked in groups of multiple
copies from the same original.
3
2
1
2
1
NON-OFFSET mode
1
All copies will be aligned in one stack in the offset tray or
the top tray with no offset.
3
2
1
1
7-4
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN1N)
Sort and group
When SORT is selected, the SORT (
copies will be collated by sets.
When STAPLE SORT is selected, the STAPLE SORT (
) icon will be indicated and
) icon will
be indicated and collated copies will be stapled automatically.
When the SORT or STAPLE SORT icon is not indicated on the touch
panel, copies will be grouped by originals.
To change the finisher mode, press the OUTPUT key and then select
the desired mode on the touch panel.
●
When the RADF is used for copying, copies will be collated in the
OFFSET mode as the default setting.
When the document glass is used for copying, copies will be
grouped in the OFFSET mode as the default setting.
SORT mode
1
2
3
Each set of copies will be sequentially delivered to the
offset tray or the top tray as selected.
3
3
3
1
2
2
2
2
1
1
1
3
1
2
3
GROUP mode
1
1
1
All copies of the same original will be grouped in the offset
tray or the top tray.
2
2
2
3
3
3
STAPLE SORT mode
Collated sets of copies will be stapled and delivered to the
offset tray.
●
See next page for details.
NOTE:
Rotationcopy(imageoforiginalwillberotatedwhentheorientation
oftheoriginaldoesnotmatchthatofthecopypaper)willnotfunction
when the STAPLE SORT mode is set.
7-5
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN1N)
Staple sort
The STAPLE SORT mode staples A4, A4R, B4, and A3 (8-1/2" x 11",
8-1/2" x 11"R, 8-1/2" x 14", and 11" x 17") size copies. Stapled sets
cannot be delivered to the top tray.
NOTE:
Different size originals cannot be copied onto copy paper of their
respectivesizesintheSTAPLESORTmode. Thepapersizeselected
for the first scanned original will be used for all originals. To copy
different size originals in the STAPLE SORT mode, select the paper
size for the largest original.
Using the RADF
Set the originals in the document feeder tray.
Stapling position
1
2
3
●
If the number of copies in one set is more than 50 for
A4 or A4R (8-1/2" x 11" or 8-1/2" x 11"R) paper or 25 for B4 or
A3 (8-1/2" x 14" or 11" x 17") paper, the copies will not be
stapled.
●
The stapling position shown in the left figure is the factory
default position.
Press the OUTPUT key.
AUTO
Press the “STAPLE SORT” key on the touch panel.
READY TO COPY.(DOCUMENT FEEDER MODE)
OK
OUTPUT
TOP TRAY
STAPLE
OFFSET
TRAY
SORT
SORT
GROUP
OFFSET
AUTO
AUTO A4
100%
OPY RATIO
EXPOSURE
PAPER SELECT
7-6
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN1N)
Select the desired stapling position.
OPY.(DOCUMENT FEEDER MODE)
4
5
6
7
●
TheAR-FN1Nfinisherhasthreeselectablestaplingpositionsas
shown below.
OK
STAPLE
SORT
SORT
GROUP
READY TO COPY.(DOCUMENT FEEDER MODE)
Press the “OK” key.
OK
OUTPUT
TOP TRAY
STAPLE
OFFSET
TRAY
SORT
SORT
UP
AUTO
EXPOSURE
AUTO A4
PAPER SELECT
Set the number of copies.
INTERRUPT
2
5
8
0
3
6
1
4
CLEAR
7
9
PROGRAM
P
C
AUDIT CLEAR
INTERRUPT
CLEAR ALL
Press the START ( ) key.
●
When copying of one set is completed, the copies will be
automatically stapled and delivered to the offset tray.
CA
START
CLEAR
C
7-7
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN1N)
Using the document glass
Set the original on the document glass with the corner
to be stapled to the upper right.
Stapling position
1
●
Copy from the last page to the first page.
If the number of copies in one set is more than 50 for
A4 or A4R (8-1/2" x 11" or 8-1/2" x 11"R) paper or 25 for B4 or
A3 (8-1/2" x 14" or 11" x 17") paper, the copies will not be
stapled.
●
●
The stapling position shown in the left figure is the factory
default position.
Press the OUTPUT key.
2
3
4
AUTO
Press the “STAPLE SORT” key on the touch panel.
READY TO COPY.
OK
OUTPUT
TOP TRAY
STAPLE
SORT
OFFSET
TRAY
SORT
GROUP
OFFSET
AUTO
AUTO A4
100%
EXPOSURE
PAPER SELECT
OPY RATIO
OK
Select the desired stapling position.
OPY.
●
TheAR-FN1Nfinisherhasthreeselectablestaplingpositionsas
shown below.
STAPLE
SORT
SORT
GROUP
7-8
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN1N)
READY TO COPY.
Press the “OK” key.
5
6
OK
OUTPUT
TOP TRAY
STAPLE
SORT
OFFSET
TRAY
SORT
UP
AUTO
AUTO A4
EXPOSURE
PAPER SELECT
Set the number of copies.
INTERRUPT
2
5
8
0
3
6
1
4
CLEAR
7
9
PROGRAM
P
C
AUDIT CLEAR
Press the START ( ) key.
INTERRUPT
CLEAR ALL
7
8
CA
Replace the finished original with the next original after
the START ( ) key indicator lights up, and then press
the START ( ) key. Repeat this step until all originals
have been scanned.
START
CLEAR
C
After all originals are scanned, press the “READ-END”
key on the touch panel.
9
●
Copying will start and each set of copies will be automatically
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
stapled and delivered to the offset tray.
READ-END
AUTO
EXPOSURE
AUTO A4
100%
TIO
PAPER SELECT
7-9
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN1N)
Staple cartridge replacement
The message “SLIDE THE FINISHER AWAY FROM THE COPIER
AND ADD STAPLES.” will appear when the staple cartridge is empty.
Replace the staple cartridge as follows:
Whileholdingthefinisherreleaselever,slidethefinisher
away from the copier.
1
2
3
4
5
Turn the stapler unit to face up.
Hold the staple box release lever to unlatch the staple
box.
Remove the staple box.
Remove the empty staple cartridge from inside the
staple box.
7-10
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN1N)
Insert the new staple cartridge into the box until it clicks
in place.
6
7
●
Insert the new cartridge by aligning the arrows on the cartridge
with those on the box. Check that the cartridge locks in place by
pulling it slightly.
●
The cartridge holds 5,000 staples.
Remove the rear paper and tape from the cartridge.
●
Pull them straight. If they are pulled obliquely, the tape may be
torn.
Insert the staple box to the stapler unit until it clicks into
place.
8
Return the stapler unit to face down.
9
Push the finisher toward the copier and latch it in place.
10
7-11
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN1N)
Staple jam removal
If staples become jammed in the stapler, “CHECK STAPLER POSITION
OR STAPLE JAM.” will be displayed. Remove the jammed staples in the
manner described below.
Whileholdingthefinisherreleaselever,slidethefinisher
away from the copier.
1
2
3
4
5
Turn the stapler unit to face up.
Hold the staple box release lever to unlatch the staple
box.
Remove the staple box.
Lower the lever at the end of the staple box and remove
the jammed staples.
7-12
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN1N)
Return the lever to its original position.
6
7
8
9
Insert the staple box to the stapler unit until it clicks in
place.
Return the stapler unit to face down.
Push the finisher toward the copier and latch it in place.
7-13
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN1N)
Misfeed removal
The copier will stop when a misfeed occurs.
The message “A MISFEED HAS OCCURRED. CLEAR INDICATED
AREA. PRESS
FOR RECOVERY INSTRUCTIONS.” will appear
with a display of paper misfeed locations. Press the INFORMATION
(
) key for more detailed information as necessary.
SF-S15 20-bin sorter
A MISFEED HAS OCCURRED.
Misfeed in the upper transport area
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
Whileholdingthefinisherreleaselever,slidethefinisher
away from the copier.
1
2
Remove the misfed paper.
7-14
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN1N)
If the misfed paper cannot be removed in step 2, open
the cover of the paper feed area of the finisher.
3
4
5
6
7
Remove the misfed paper.
If the misfed paper cannot be removed in step 4, close
the cover of the paper feed area and open the top cover.
Remove the misfed paper.
Close the top cover.
7-15
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN1N)
Push the finisher toward the copier and latch it in place.
8
●
Confirm that the misfeed display is cleared.
A MISFEED HAS OCCURRED.
Misfeed in the lower transport area
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
Whileholdingthefinisherreleaselever,slidethefinisher
away from the copier.
1
Remove the misfed paper from the paper transport area
as shown in the illustration.
2
7-16
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN1N)
Open the paper transport area cover of the finisher.
Use the transport area lever to open the transport.
Remove the misfed paper.
3
4
5
6
Close the transport.
7-17
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN1N)
Remove the misfed paper.
7
●
Remove the misfed paper from the paper transport area.
●
If the misfed paper is not seen in the paper transport area, turn
the roller rotating knob to feed the paper.
Roller rotating knob
Close the paper transport area cover.
8
9
Push the finisher toward the copier and latch it in place.
●
Confirm that the misfeed display is cleared.
7-18
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN2)
The copier has two different finisher modes: one sorts copies into sets
matching the sequence of the originals and the second groups copies by
original. When an optional finisher (AR-FN2) is installed, the copier can
automatically staple the sorted copies. Each collated set of copies or
group of copies can be stacked offset from the previous set.
Top cover
PART NAMES
Top tray
Paper feed area cover
Offset tray
Stapler cover
Staple cartridge
CAUTION
Do not put pressure on the finisher or subject it to undue force.
Specifications
Tray capacity
Paper size
Top tray: 250 sheets
Offset tray: 750 sheets
Top tray: A3 to A6R (5-1/2" x 8-1/2" to 11" x 17", 12" x 18")
Offset tray: A4 (8-1/2" x 11")
Paper weight
Top tray: 52 to 128 g/m2 (14 lbs. to 34 lbs.)
Offset tray: 56 to 128 g/m2 (15 lbs. to 34 lbs.)
For paper weighing more than 105 g/m2 (28 lbs.),
A4 (8-1/2" x 11") is the maximum size.
Offset
Min. 15 mm for A4 (61/64 inch for 8-1/2" x 11")
A4 (8-1/2" x 11")
Paper size
for stapling
Stapling capacity 30 sheets (80 g/m2 (21 lbs.))
Power supply
Weight
Drawn from the copier
Approx. 22 kg (49 lbs.)
Dimensions
457 mm (W) x 518 mm (D) x 820 mm (H)
(18"(W) x 20-13/32"(D) x 32-19/64"(H))
Specifications are subject to change for improvement without notic7e. -19
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN2)
Offset stack
In the initial setting, the top tray is selected.
To select the offset tray, press the OUTPUT key and then the
“OFFSET TRAY” key on the touch panel.
If the offset tray is selected, each copy set will be offset by a minimum
of 15 mm for A4 paper (61/64 inch for 8-1/2" x 11" paper).
When the offset stack function is disabled, copies will not be offset.
The offset stack function can be enabled or disabled by pressing the
“OFFSET” check mark box on the touch panel.
O
When the STAPLE SORT mode is selected, the offset stack function
will be disabled.
If the offset tray is selected, only A4 (8-1/2" x 11") paper can be used.
The top tray cannot be used to offset copies.
OFFSET mode
1
1
When copying in the SORT mode, each collated set of
copies will be stacked offset a minimum of 15 mm
for A4 paper (61/64 inch for 8-1/2" x 11" paper) from the
previous set. When copying in the GROUP mode, copies
will be offset and stacked in groups of multiple copies
from the same original.
3
2
1
1
2
NON-OFFSET mode
1
All copies will be aligned in one stack in the offset tray or
the top tray with no offset.
3
2
1
1
7-20
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN2)
Sort and group
When SORT is selected, the SORT (
copies will be collated by sets.
) icon will be indicated and
) icon will
When STAPLE SORT is selected, the STAPLE SORT (
be indicated and collated copies will be stapled automatically.
When the SORT or STAPLE SORT icon is not indicated on the touch
panel, copies will be grouped by originals.
To change the finisher mode, press the OUTPUT key and then select
the desired mode on the touch panel.
●
When the RADF is used for copying, copies will be collated at the
default setting.
When the document glass is used for copying, copies will be
grouped at the default setting.
●
In the STAPLE SORT mode, only A4 (8-1/2" x 11") paper can be
used.
SORT mode
1
2
3
Each set of copies will be sequentially delivered to the
offset tray or the top tray as selected.
3
3
3
1
2
2
2
2
1
1
1
3
1
2
3
GROUP mode
1
1
1
All copies of the same original will be grouped in the
offset tray or the top tray.
2
2
2
3
3
3
STAPLE SORT mode
Collated sets of copies will be stapled and delivered to the
offset tray.
●
See next page for details.
7-21
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN2)
Staple sort
The STAPLE SORT mode staples A4 (8-1/2" x 11") size copies.
Stapled sets cannot be delivered to the top tray.
NOTE:
Different size originals cannot be copied onto copy paper of their
respective sizes in the STAPLE SORT mode. Only A4 (8-1/2" x 11")
size paper can be selected in the STAPLE SORT mode.
Using the RADF
Set the originals in the document feeder tray.
1
●
If the number of copies in one set is more than 30, the copies
will not be stapled.
Stapling position
●
If the orientation of the originals does not match that of the copy
paper, the images of the originals will be rotated. The stapling
position in this case is shown below.
●
If originals in the landscape orientation are copied, the copies
will be stapled at an improper position.
Press the OUTPUT key.
2
3
AUTO
Press the “STAPLE SORT” key on the touch panel.
READY TO COPY.(DOCUMENT FEEDER MODE)
OK
OUTPUT
TOP TRAY
STAPLE
OFFSET
TRAY
SORT
SORT
GROUP
AUTO
AUTO A4
100%
OPY RATIO
EXPOSURE
PAPER SELECT
7-22
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN2)
READY TO COPY.(DOCUMENT FEEDER MODE)
Press the “OK” key.
4
5
6
OK
OUTPUT
TOP TRAY
STAPLE
OFFSET
TRAY
SORT
SORT
UP
AUTO
EXPOSURE
AUTO A4
PAPER SELECT
Set the number of copies.
INTERRUPT
2
5
8
0
3
6
1
●
If A4 (8-1/2" x 11") paper has not been selected, press the
“PAPER SELECT” key and select a paper tray containing
A4 (8-1/2" x 11") paper.
4
CLEAR
7
9
PROGRAM
P
C
AUDIT CLEAR
Press the START ( ) key.
INTERRUPT
CLEAR ALL
●
When copying of one set is completed, the copies will be
CA
automatically stapled and delivered to the offset tray.
START
CLEAR
C
7-23
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN2)
Using the document glass
Set the original on the document glass with the corner
to be stapled to the upper right.
Stapling position
1
●
Copy from the last page to the first page.
●
If the number of copies in one set is more than 30, the copies
will not be stapled.
●
If the orientation of the original does not match that of the copy
paper, the image of the original will be rotated. The stapling
position in this case is shown below.
●
If originals in the landscape orientation are copied, the copies
will be stapled at an improper position.
Press the OUTPUT key.
2
AUTO
Press the “STAPLE SORT” key on the touch panel.
READY TO COPY.
3
4
OK
OUTPUT
TOP TRAY
STAPLE
SORT
OFFSET
TRAY
SORT
GROUP
AUTO
AUTO A4
100%
OPY RATIO
EXPOSURE
PAPER SELECT
Press the “OK” key.
READY TO COPY.
OK
OUTPUT
TOP TRAY
STAPLE
SORT
OFFSET
TRAY
SORT
UP
AUTO
AUTO A4
EXPOSURE
PAPER SELECT
7-24
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN2)
Set the number of copies.
INTERRUPT
2
5
8
0
3
6
1
4
●
5
If A4 (8-1/2" x 11") paper is not selected, press the “PAPER
SELECT” key and select a paper tray containing A4
(8-1/2" x 11") paper.
CLEAR
7
9
PROGRAM
P
C
AUDIT CLEAR
Press the START ( ) key.
INTERRUPT
CLEAR ALL
6
7
CA
Replace the finished original with the next original
after the START ( ) key indicator lights up, and then
press the START ( ) key. Repeat this step until all
originals have been scanned.
START
CLEAR
C
After all originals are scanned, press the “READ-END”
key on the touch panel.
8
●
Copying will start and each set of copies will be automatically
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
stapled and delivered to the offset tray.
READ-END
AUTO
EXPOSURE
AUTO A4
PAPER SELECT
100%
TIO
7-25
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN2)
Staple cartridge replacement
The message “ADD STAPLES.” will appear when the staple
cartridge is empty. Replace the staple cartridge as follows:
Open the stapler cover.
1
2
3
4
Lift the green release lever and remove the staple
cartridge from the stapler.
●
A few staples will be left in the cartridge. Remove and discard
them.
Insert a new sheet of paper ( A4 or 8-1/2” x 11” size) to
the tray as shown in the picture to make the stapler
work properly.
Check that the first staple in the new cartridge is at the
tip of the cartridge.
●
If the first staple is not at the tip, pull it to the tip. If any staples are
protruding past the cartridge tip, tear them off at the STAPLE
TEAR line and align the first staple with the tip.
●
A cartridge holds 5,000 staples.
STAPLE TEAR line
Push the new staple cartridge in until it clicks in place.
Close the stapler cover.
5
6
●
The stapler will strike three times without stapling and feed
staples automatically.
●
Remove the paper from the tray.
●
To check that the stapler works properly, copy an original and
staple it.
7-26
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN2)
Staple jam removal
●
●
Themessage“CHECKSTAPLERPOSITIONORSTAPLE
JAM”willappeareitherwhenthestaplecartridgeisempty
orwhenthereisastaplejam. Pleaseproceedasfollows.
Open the stapler cover and remove the stapler cartridge
by lifting the green release lever.
If the cartridge is empty (a few staples might remain in
the cartridge), refer to the section entitled “Staple
Cartridge Replacement” on page 7-26.
If there are sufficient staples left in the cartridge, the
stapler is jammed. Remove the jammed staples in the
manner described below.
Close and open the stapler cover.
1
2
3
4
Remove all copies from the tray.
Insert a new sheet of paper (A4 or 8-1/2” x 11” size) to
the tray as shown in the picture to make the stapler
work properly.
Check that the first staple of the cartridge is at the tip of
the cartridge.
●
If the first staple is not at the tip, pull it to the tip. If any staples are
protruding past the cartridge tip, tear them off at the STAPLE
TEAR line and align the first staple with the tip.
STAPLE TEAR line
Push the staple cartridge in until it locks in place.
Close the stapler cover.
5
6
●
The stapler will strike three times, whereupon the jammed
staples will have been removed automatically.
●
Remove the paper from the tray.
●
To check that the stapler works properly, copy an original and
staple it.
7-27
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN2)
Misfeed removal
The copier will stop when a misfeed occurs.
A MISFEED HAS OCCURRED.
The message “A MISFEED HAS OCCURRED. CLEAR INDICATED
AREA. PRESS
FOR RECOVERY INSTRUCTIONS.” will appear
along with a display of paper misfeed locations. Press the
INFORMATION ( ) key for more detailed information.
SF-S15 20-bin sorter
CLEAR INDICATED AREA.
PRESS
FOR RECOVERY INSTRUCTIONS.
If the offset tray has been used, remove the misfed
paper.
1
While holding the finisher release lever, slide the
finisher away from the copier.
2
3
4
Remove the misfed paper.
Open the top cover.
7-28
Download from Www.Somanuals.com. All Manuals Search And Download.
FINISHER (AR-FN2)
Remove the misfed paper.
5
6
Rotate the paper feed area cover as shown to open it.
Remove the misfed paper.
7
Open the paper guide and remove the misfed paper.
8
Close the paper feed area cover and then close the top
cover.
9
Push the finisher toward the copier and latch it in
place.
10
●
Confirm that the misfeed display has cleared.
7-29
Download from Www.Somanuals.com. All Manuals Search And Download.
LARGE CAPACITYTRAY (AR-LC1N)
The large capacity tray provides the added convenience of having
3,000 additional sheets of A4 (8-1/2" x 11") paper available.
NOTE:
To install the large capacity tray, an optional stand/500-sheet paper
drawer (AR-DE1N) or an equivalent stand must be installed.
PART NAMES
Paper tray control button
Specifications
Paper size
Paper weight
Paper capacity
Weight
A4 (8-1/2" x 11")
56 to 105 g/m2 (15 lbs. to 28 lbs.)
3,000 sheets
Approx. 32 kg (70.6 lbs.)
Dimensions
330 mm (W) x 540 mm (D) x 583 mm (H)
(13" (W) x 21-17/64" (D) x 22-61/64" (H))
Specifications are subject to change for improvement without notice.
7-30
Download from Www.Somanuals.com. All Manuals Search And Download.
LARGE CAPACITY TRAY (AR-LC1N)
Loading copy paper
The large capacity tray will automatically lower when the tray runs out
of paper.
Pressthepapertraycontrolbuttononthelargecapacity
tray.
1
●
The button lamp will blink while the feed table is lowering and
will go out when the tray is ready to be opened.
When the button lamp goes out, pull the paper tray out.
2
3
●
Do not pull the paper tray out before the button lamp goes out.
OnlyusepaperwithintheSharpspecificationandfollow
thepapermanufacturer’sinstructionsregardingfanning
and loading the paper.
Load the paper onto the feed table.
Maximum height line
●
4
5
Be sure to load paper appropriate for the large capacity tray.
See page 7-30.
●
Do not exceed the maximum height line.
Gently push the large capacity tray back into place.
●
The paper tray control button lamp will blink as the feed table
returns to the feed position and will light up steadily when it is in
position to feed.
7-31
Download from Www.Somanuals.com. All Manuals Search And Download.
LARGE CAPACITY TRAY (AR-LC1N)
Misfeed removal
The copier will stop when a misfeed occurs.
A MISFEED HAS OCCURRED.
The message “A MISFEED HAS OCCURRED. CLEAR INDICATED
AREA.PRESS FORRECOVERYINSTRUCTIONS.”willappearwith
a display of paper misfeed locations. Press the INFORMATION (
key for more detailed information as necessary.
)
CLEAR INDICATED AREA.
PRESS FOR RECOVERY INSTRUCTIONS.
While holding the tray release lever, carefully slide the
large capacity tray away from the copier until it stops.
Release lever
1
2
Remove any misfed paper from the copier and the large
capacity tray.
Upper
right side
cover
●
Be sure not to tear the misfed paper during removal.
●
Open and close the upper right side cover of the copier after
removing the misfed paper from the copier.
If the misfed paper cannot be removed easily, open the upper
right side cover to remove the paper.
7-32
Download from Www.Somanuals.com. All Manuals Search And Download.
LARGE CAPACITY TRAY (AR-LC1N)
Push the large capacity tray toward the copier and latch
it into place.
3
4
5
6
If misfed paper is not found in step 2, pull the tray out.
●
Whenpullingthelargecapacitytrayout,besuretopullitoutafter
the paper tray control button lamp goes out.
Remove the misfed paper.
Gently push the tray back into place.
●
Confirm that the misfeed display is cleared.
7-33
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
STAND/500-SHEET PAPER DRAWER AR-DE1N
This optional stand with a paper tray provides the convenience of
increased paper capacity for the copier and a greater choice of paper
sizes readily available for copying. Even greater paper capacity and
size flexibility are available when the stand is equipped with an
optional auxiliary 500-sheet paper drawer (AR-CS1).
The AR-DE1N is available with a 500-sheet paper drawer alone or
with an optional auxiliary 500-sheet paper drawer for the additional
flexibility of two feeds with a total capacity of 1,000 sheets.
PART NAMES
Side cover
500-sheet paper drawer
Optional 500-sheet paper
drawer position
Specifications
Paper size
A4 to A3 (8-1/2" x 11" to 11" x 17")
Paper weight
Paper capacity
56 to 105 g/m2 (15 lbs. to 28 lbs.)
500 sheets of paper
Total of 1,000 sheets of paper with an
optional 500-sheet paper drawer installed
Weight
Approx. 25 kg (55.2 lbs.)
Dimensions
600 mm (W) x 604 mm (D) x 403 mm (H)
(23-5/8" (W) x 23-25/32" (D) x 15-7/8" (H))
Specifications are subject to change for improvement without notice.
7-34
Download from Www.Somanuals.com. All Manuals Search And Download.
STAND/500-SHEET PAPER DRAWER (AR-DE1N)
Loading copy paper
The method of loading of copy paper for the paper tray of the 500-
sheet paper drawer is the same as for the paper trays in the copier.
See page 4-3.
The method of changing the copy paper size is also the same for the
paper trays in the copier. See page 4-4.
7-35
Download from Www.Somanuals.com. All Manuals Search And Download.
STAND/500-SHEET PAPER DRAWER (AR-DE1N)
Misfeed removal
The copier will stop when a misfeed occurs.
A MISFEED HAS OCCURRED.
The message “A MISFEED HAS OCCURRED. CLEAR INDICATED
AREA.PRESS FORRECOVERYINSTRUCTIONS.”willappearwith
a display of paper misfeed locations. Press the INFORMATION (
key for more detailed information as necessary.
)
CLEAR INDICATED AREA.
PRESS
FOR RECOVERY INSTRUCTIONS.
Open the lower right side cover and remove any misfed
paper.
1
●
Be sure to perform this step before pulling out the paper drawer.
If not, the paper may be torn as the drawer is opened.
●
Be sure not to tear the misfed paper during removal.
Gently lift and pull out the paper drawer. Remove any
misfed paper.
2
Close the paper drawer and the lower right side cover.
3
4
Open and close the front cover to cancel the misfeed
display.
●
Confirm that the misfeed display is cleared.
7-36
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
DUAL TRAY OUTPUT UNIT AR-TR1
This optional unit can deliver interrupt copies to the lower exit tray.
PART NAMES
Upper exit tray
(AR-TE1)
Lower exit tray
(AR-TE1)
Upper exit tray (First tray)
●
Ordinary (non-interrupt) copies are deposited in the upper exit tray.
Lower exit tray (Second tray)
●
Interrupt copies are deposited in the lower exit tray.
A key operator program can disable output to the lower exit tray in interrupt copying.
See page 8-26 for Enable / Disable setting.
●
Be sure to extend the tray when feeding B4 or A3 (8-1/2"
x 14" or 11" x 17") sized paper.
7-37
Download from Www.Somanuals.com. All Manuals Search And Download.
DUAL TRAY OUTPUT UNIT (AR-TR1)
Specifications
Exit tray capacity
Paper size
Upper tray : 250 sheets
Lower tray : 100 sheets
Upper tray : A6 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Lower tray : A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Paper weight
Upper tray : 52 to 128 g/m2 (14 lbs. to 34 lbs.)
Lower tray : 56 to 105 g/m2 (15 lbs. to 28 lbs.)
Power supply
Weight
Drawn from the copier
Approx. 3.3 kg (7.3 lbs.)
Specifications are subject to change for improvement without notice.
7-38
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 8
KEY OPERATOR’S GUIDE
This chapter contains information on all of the programs used by the key
operator. Theprogramsallowthekeyoperatortotailormanyfunctionsof
the AR-287/337/407 for specific modes of operation. These programs
can only be accessed after a key operator code number has been
entered.
Please familiarise yourself with this chapter and refer to it for the
information you need to keep the copier operating smoothly.
Page
●
KEY OPERATOR CODE NUMBER ..................... 8-2
Registering the key operator code number ................ 8-2
●
KEY OPERATOR PROGRAMS ........................ 8-4
Using the key operator programs ....................... 8-7
●
KEY OPERATOR ASSISTANCE CALL ................. 8-29
●
KEY OPERATOR CODE NUMBER:
FACTORY SETTING ............................... 8-31
8-1
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR CODE NUMBER
A key operator code number must be registered before a key operator
program can be used. The key operator must remember this number. Only
this registered number will allow access to the key operator programs.
Registering the key operator code number
Press the CUSTOM SETTINGS (
) key.
1
2
Press the “KEY OPERATOR PROGRAMS” key on the
touch panel.
EXIT
CUSTOM SETTINGS
●
The following display will appear.
DISPLAY
CONTRAST
KEY OPERATOR
PROGRAMS
EXIT
KEY OPERATOR PROGRAMS
ENTER KEY OPERATOR CODE.
AUTO
AUTO A4
100%
OPY RATIO
KEY OPERATOR CODE
EXPOSURE
PAPER SELECT
-----
INTERRUPT
2
5
8
0
3
6
1
4
Enter your key operator code number using the 10-key
pad.
CLEAR
7
9
PROGRAM
P
3
4
C
●
When registering the key operator code number for the first time,
AUDIT CLEAR
enter the number that was set at the factory. (See page 8-31.)
●
As the code number is entered, the dashes in the display will
change to asterisks.
EXIT
KEY OPERATOR PROGRAMS
Press the “COPIER” key on the touch panel.
COPIER
PROGRAM LIST
RINTOUT.
TOTAL COUNT.
Press the “OTHER FUNCTION SETTINGS” key.
KEY OPERATOR PROGRAMS
COPIER MODE
5
OK
OTHER FUNCTION
SETTINGS
TIMER SETTINGS
ACCOUNT CONTROL
ENABLESABLE
SETTIN
8-2
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR CODE NUMBER
Pressthe“KEYOPERATORCODENUMBERCHANGE.”
key.
KEY OPERATOR PROGRAMS
OTHER FUNCTION SETTINGS
6
7
OK
KEY OPERATOR CODE NUMBER
CHANGE.
1/4
EXPOSURE ADJUNT.
TONER SAVE E.
AE:3
ADD OR CHANGRESET
RATIOS.
R:0
E:0
Chooseanew5-digitcodenumberandenteritusingthe
10-key pad.
INTERRUPT
2
5
8
0
3
6
1
4
CLEAR
7
9
PROGRAM
P
C
AUDIT CLEAR
OK
Press the
key.
KEY OPERATOR PROGRAMS
KEY OPERATOR CODE
8
9
●
The code number will change from the previous setting to the
new setting.
OK
NUMBER CHANGE.
INPUT A NEW CODE NUMBER AND PRESS [O.
To continue with other key operator programs, press
the
program.
OK
key (if needed) and then select another
PRESENT
98765
NEW
16805
To exit the key operator program mode, press the
CA
CLEAR ALL ( ) key.
8-3
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Acompletelistofallkeyoperatorprogramsisprovidedbelow. Theseprogramscan
only be accessed by first entering the key operator code number.
Thekeyoperatorprogramsaregroupedintofourcategories:accountcontrol, other
function settings, timer settings, and enable/disable settings.
Category
Program Name
Auditing Mode
Function
Page No.
8-9
Account Control
Enables or disables the basic auditing mode, which
controls access to copier.
Number of Copies
per Account
Displays the total number of copies made against
account numbers.
8-9
8-10
8-10
Resetting Account
Resets all audit accounts or selectively resets
individual accounts.
Account Number
Control
Registers accounts, deletes accounts, changes an
account number, or prints all registered account
numbers.
Account Limit
Setting
Sets the maximum number of copies which can be
made against a registered account number.
8-12
8-13
Account Number
Security
Guards against trial and error entering of audit
account numbers.
Other Function
Settings
Key Operator Code
Number Change
Changes the key operator code number.
8-14
8-14
Exposure
Adjustment
Lightens or darkens copies in the automatic
exposure mode.
Add or Change
Extra Preset Ratios
Adds or changes reduction and enlargement preset
copy ratios.
8-15
8-15
8-16
8-16
8-17
8-17
8-18
Setting a Maximum
Number of Copies
Sets the maximum number of copies that can be
selected.
Initial Margin Shift
Setting
Sets the initial margin shift values.
Erase Width
Adjustment
Sets the initial amount of the erase area.
Initial Status
Setting
Sets the copier’s initial settings in the ready
condition.
Stream Feeding
Mode
Enables the stream feeding mode for copying
from the document feeder.
Staple Position
Setting
Sets the initial stapling position setting for an optional
finisher (AR-FN1N only).
8-4
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Category
Program Name
Function
Page No.
Date Format
Setting
Sets the initial date format.
8-18
8-19
8-19
8-20
8-21
8-21
8-22
Date and Time
Adjustment
Adjusts the date and time.
Rotation Copy
Setting
Enables/disables rotation of original images.
Sets a paper size in each tray with [EXTRA] setting.
Size Setting for
[EXTRA]
Timer Settings
Auto Power
Shut-off Timer
Sets a time interval after which the copier
automatically turns off.
Auto Clear Setting
Sets a time interval after which the copier returns
to the initial settings.
Preheat Mode
Setting
Sets the time that elapses before the copier enters
the preheat mode after copying is completed.
Noise Level Reduce
Mode
Sets the time that elapses before the copier enters the 8-22
noise level reduce mode after copying is completed.
Message Time
Setting
Sets the length of time that messages are displayed.
8-23
8-24
8-24
8-24
Enable/Disable
Settings
Disabling of Auto
Paper Selection
Prevents automatic paper selection.
Disabling of Auto
Tray Switching
Prevents automatic switching between the paper
trays.
Disabling of
Bypass-Tray
in Duplex Copy
Prohibits the use of the bypass tray during
duplex copying.
Disabling
Deletion of Job
Programs
Prevents stored programs from being replaced or
deleted.
8-25
Disabling of
Document Feeder
Prevents the use of the document feeder when it
malfunctions.
8-25
8-25
Disabling of Duplex
Copying
Temporarily prevents the duplex system from
operating when it malfunctions. Allows the use of the
copier but not the duplex system.
8-5
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Category
Program Name
Function
Page No.
8-26
Disabling of
Stapler
Prevents damage to the stapler while awaiting
repair service.
(The stapler is included in an optional finisher
(AR-FN1N, AR-FN2).)
Disabling of
Prevents the selection of COVERS mode.
8-26
Covers Mode
Disabling of
PC/Modem Access
Provides or prevents access to key operator programs 8-26
through a PC/modem without key operator code entry.
Disabling of Second
Tray Output in
Interrupt
Disables output of copies to the second tray in
interrupt copying.
8-27
Disabling of Auto
Power Shut-off Mode
Disables the auto power shut-off mode.
8-27
8-27
8-28
Disabling of Beep
When Keys Touched are touched.
Enables or disables sounding of beep when keys
Disabling of Bypass- Disables the bypass tray when the offset is selected
Tray When Offset
Tray Selected
for an optional finisher (AR-FN2 only).
Other Programs
Total Count
Recalls the total counts, including counts of the
copier, document feeder, duplex module, and stapler.
8-28
8-28
Program List
Printout
Sequentially prints available key operator programs.
8-6
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Using the key operator programs
Press the CUSTOM SETTINGS (
) key.
1
2
Press the “KEY OPERATOR PROGRAMS” key on the
touch panel.
●
The following display will appear.
EXIT
KEY OPERATOR PROGRAMS
ENTER KEY OPERATOR CODE.
EXIT
CUSTOM SETTINGS
DISPLAY
CONTRAST
KEY OPERATOR
PROGRAMS
KEY OPERATOR CODE
-----
AUTO
AUTO A4
100%
OPY RATIO
EXPOSURE
PAPER SELECT
Enter the key operator code number.
INTERRUPT
2
5
3
6
1
4
3
4
●
The dashes in the display will change to asterisks.
CLEAR
7
9
PROGRAM
P
C
AUDIT CLEAR
Press the “COPIER” key on the touch panel.
EXIT
KEY OPERATOR PROGRAMS
COPIER
PROGRAM LIST
RINTOUT.
TOTAL COUNT.
8-7
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Select the desired category on the touch panel.
Example: To select the account control category, press the
“ACCOUNT CONTROL” key.
KEY OPERATOR PROGRAMS
5
OK
COPIER MODE
OTHER FUNCTION
SETTINGS
TIMER SETTINGS
ACCOUNT CONTROL
ENABLE/DISABLE
SETTINGS
Press the key of the desired program on the touch panel.
Example: To see the number of copies per account, press the
“NUMBER OF COPIES PER ACCOUNT.” key.
KEY OPERATOR PROGRAMS
ACCOUNT CONTROL
6
OK
AUDITING MODE.
●
For some programs, a check box is displayed to the left of the
1/2
programname.Iftheboxispressed,acheckmarkwillappearand
theprogramwillbeset.Iftheboxispressedagain,thecheckmark
will disappear and the program will be cancelled.
NUMBER OF COPIES PER ACCOUNT.
RESETTING ACC.
●
For other programs, the program setting screen of the program
ACCOUNT NUMBENTROL.
will appear when the program key is pressed.
●
If
and/or
keys are displayed, additional programs can be
displayed using these keys.
Follow instructions for the program.
7
8
●
If a mistake is made during entry, press the CLEAR ( ) key to
clear the entry.
C
●
Tocontinuewithotherkeyoperatorprograms,pressthe“OK”key
(if needed) and then select another program.
To exit the key operator program mode, press the CLEAR
ALL ( ) key.
INTERRUPT
CLEAR ALL
CA
CA
START
CLEAR
C
8-8
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
ACCOUNT CONTROL
The programs of this category are used to set the internal auditor
functions.Theseprogramscanbeselectedbypressingthe“ACCOUNT
CONTROL” key and then selecting the desired program key.
Auditing Mode
This program is used to enable or disable the basic auditing mode.
When disabled, the message in the display will be “READY TO
COPY.” Access to copying is open to any operator.
When enabled, the message in the display will be “ENTER YOUR
ACCOUNT NUMBER. -----”. Copying in this state is limited to
operators with an assigned 5-digit account number.
A maximum of 50, 5-digit account numbers can be assigned. Use key
operator program “Account Number Control” (page 8-10) to assign
account numbers.
To enable the auditing mode, press the check box of
“AUDITING MODE.” to display a check mark in the check
box.
To disable the auditing mode, press the check box of this
program again to clear the check mark in the check box.
Number of Copies per Account
This program is used to display or print the total number of copies
made against each account number.
An A3 (11" x 17") copy is counted as two copies.
When the “NUMBER OF COPIES PER ACCOUNT.” key is pressed,
the following display will appear.
KEY OPERATOR PROGRAMS
OK
NUMBER OF COPIES PER ACCOUNT.
ACCOUNT
NUMBER OF
NUMBER
COPIES MADE
MAXIMUM
600,000
1/2
16805
16850
16900
17806
:
:
:
:
001,100
002,200
003,500
004,400
500,000
500,000
800,000
PRINT
1. Press the
key to advance through the accounts.
●
To print all accounts, press the “PRINT” key. To stop printing
after starting, press the “CANCEL” key.
●
If “000,000” is displayed in a column of MAXIMUM, the account
limit has not been set for the account.
2. Press the “OK” key to exit the program.
8-9
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Resetting Account
This program is used to reset all audit accounts or to selectively reset
individual accounts.
When the “RESETTING ACCOUNT.” key is pressed, the following
display will appear.
KEY OPERATOR PROGRAMS
OK
RESETTING ACCOUNT.
ACCOUNT
NUMBER OF
NUMBER
16805
COPIES MADE
MAXIMUM
600,000
1/2
:
:
:
:
001,100
002,200
003,500
004,400
16850
16900
17806
500,000
500,000
800,000
ALL ACCOUNTS
RESET
●
If “000,000” is displayed in a column of MAXIMUM, the account
limit has not been set for the account.
To reset all accounts
1. Press the “RESET” (ALL ACCOUNTS) key on the touch
panel.
2. Press the “YES” key.
3. Press the “OK” key to exit the program.
To reset a single account
1. Press the key of an account to be reset.
●
To display other account numbers, press the
or
key.
2. Press the “YES” key.
3. Continue with steps 1 and 2 for other account numbers.
Press the “OK” key to exit the program.
Account Number Control
Thisprogramisusedtoregisteraccounts,deleteaccounts,changean
account number, or print all account numbers.
When the “ACCOUNT NUMBER CONTROL.” key is pressed, the
following display will appear.
KEY OPERATOR PROGRAMS
ACCOUNT NUMBER CONTROL.
OK
ENTER
DELETE
CHANGE
PRINT
8-10
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
To register accounts
1. Press the “ENTER” key.
2. Enter a 5-digit account number (00001 to 99999) using
the 10-key pad.
●
Select a number different from the key operator code number.
3. Press the “ENTER” key.
●
If a number that is already registered is entered, the message
“THIS NUMBER IS ALREADY USED.” will appear. Press the
“OK” key and enter another number.
4. To enter other account numbers, repeat steps 2 and 3.
Press the “OK” key twice to exit the program.
To delete accounts
1. Press the “DELETE” key.
2. To delete all accounts, press the “DELETE” (ALL
ACCOUNTS) key on the touch panel.
●
A message will appear to confirm the selection. Press the
“YES” key to delete all accounts. If you decide not to delete all
accounts, press the “NO” key.
3. To delete an individual account, enter the account
number to be deleted using the 10-key pad.
4. Press the “ENTER” key.
5. Continue with steps 3 and 4 for other account numbers.
Press the “OK” key twice to exit the program.
To change an account number
1. Press the “CHANGE” key.
2. Enter the account number to be changed using the
10-key pad.
3. Enter a new account number.
4. Press the “ENTER” key.
●
If a number that is already registered is entered, the message
“THIS NUMBER IS ALREADY USED.” will appear. Press the
“OK” key and enter another number.
5. To change other account numbers, repeat steps 2 to 4.
Press the “OK” key twice to exit the program.
8-11
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
To print all registered account numbers
1. Press the “PRINT” key.
●
The copier will start printing. To stop printing after starting,
press the “CANCEL” key.
2. Press the “OK” key to exit the program.
Account Limit Setting
This program is used to set the maximum number of copies which can
be made against a registered account number.
When an optional printer expansion kit is installed, enabling of key
operatorprogram“RECORDCOPYANDPRINTPERACCOUNT”will
disable the “ACCOUNT LIMIT SETTING”.
★ KEY OPERATOR
See page 46 of the AR-PB2 A operation
manual for the setting of key operator program “RECORD COPY
AND PRINT PER ACCOUNT”.
When the “ACCOUNT LIMIT SETTING.” key is pressed, the following
display will appear.
KEY OPERATOR PROGRAMS
ACCOUNT LIMIT SETTING.
INPUT ACCOUNT NUMBER TO BE LIMITED.
OK
ACCOUNT
NUMBER
NUMBER OF
COPIES MADE
MAXIMUM
-----
ALL ACCOUNTS
LIMIT
ENTER
To set a limit
1. Enter the account number to be limited.
2. Enter the upper limit (max. 999,999) for the account.
●
If a limit for the account has been already set, the limit will be
displayed. Press the CLEAR ( ) key before entering a new
C
upper limit.
●
To cancel a limit, press the CLEAR ( C ) key and proceed to
step 3 without entering a limit.
3. Press the “ENTER” key.
4. To limit other accounts, repeat steps 1 to 3. Press the
“OK” key to exit the program.
8-12
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
To set a limit for all accounts
1. Press the “LIMIT” (ALL ACCOUNTS) key on the touch
panel.
●
“ALL” will appear under “ACCOUNT NUMBER”.
2. Enter the upper limit (max. 999,999) for all accounts.
●
To cancel the limit for all accounts, proceed to step 3 without
entering a limit.
3. Press the “ENTER” key.
4. Press the “OK” key to exit the program.
Account Number Security
This program is used to make it difficult for users to gain access to
accounts by entering code numbers through trial and error. If this
program is selected and an operator enters three successive invalid
account numbers, the copier will not accept another number for one
minute and the message “PLEASE SEE YOUR KEY OPERATOR FOR
ASSISTANCE.” will appear.
To enable the account number security function, press the
check box of “ACCOUNT NUMBER SECURITY.” to display a
check mark in the check box.
To disable this function, press the check box of this program
again to clear the check mark in the check box.
8-13
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
OTHER FUNCTION SETTINGS
The programs of this category are used to adjust various settings of
copier functions. These programs can be selected by pressing the
“OTHER FUNCTION SETTINGS” key and then selecting the desired
program key.
Key Operator Code Number Change
See page 8-2, KEY OPERATOR CODE NUMBER.
Exposure Adjustment
Usethisprogramtolightenordarkencopiesintheautomaticexposure
mode. The factory setting is level 3.
Whenthe“EXPOSUREADJUSTMENT.”keyispressed,thefollowing
display will appear.
KEY OPERATOR PROGRAMS
EXPOSURE ADJUSTMENT.
OK
AUTO
1. Adjust the exposure using the
2. Press the “OK” key.
and
keys.
8-14
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Add or Change Extra Preset Ratios
Two extra preset copy ratios can be added within both the reduction
range(25%to99%)andtheenlargementrange(101%to400%forthe
AR-407; 101% to 800% for the AR-287 and the AR-337). Only added
preset copy ratios can be changed. The standard preset copy ratios
are fixed in memory and cannot be changed.
When the “ADD OR CHANGE EXTRA PRESET RATIOS.” key is
pressed, the following display will appear.
KEY OPERATOR PROGRAMS
ADD OR CHANGE EXTRA
OK
PRESET RATIOS.
SELECT THE RATIO TO BE ADDED OR CHANGED AND
SET NEW PRESET RATIO.
REDUCTION
ENLARGEMENT
60
(25~99)
(101~400)
1. Press a key under “REDUCTION” or “ENLARGEMENT”
on the touch panel.
●
The selected key will be highlighted.
2. Use the
and
keys to set the desired copy ratio.
●
To decrease or increase the copy ratio rapidly, press and hold
the or key.
●
●
To add or change other extra preset copy ratios, repeat steps 1
and 2.
To cancel an extra preset ratio, select the copy ratio and press
the CLEAR ( C ) key.
3. Press the “OK” key.
Setting a Maximum Number of Copies
Use this program to limit the maximum number of copies per copy run
which can be input in the copy quantity display.
When the “SETTING A MAXIMUM NUMBER OF COPIES.” key is
pressed, the following display will appear.
KEY OPERATOR PROGRAMS
SETTING A MAXIMUM
OK
NUMBER OF COPIES.
[ ]
INPUT THE NUMBER AND PRESS OK .
MAXIMUM NUMBER OF COPIES
(1~999)
999
1. Input the number using the 10-key pad.
●
A number from 1 to 999 can be set.
2. Press the “OK” key.
8-15
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Initial Margin Shift Setting
Set the initial margin shift value with this program.
When the “INITIAL MARGIN SHIFT SETTING.” key is pressed, the
following display will appear.
KEY OPERATOR PROGRAMS
INITIAL MARGIN SHIFT
SETTING.
SET THE INITIAL MARGIN SHIFT.
OK
SIDE 1 SIDE 2
(0~20)
mm
(0~20)
10
10
mm
1. Adjust the value for each side using the
and
keys.
●
The value can be set from 0 mm to 20 mm in 1 mm increments
(0" to 1" in 1/8" increments).
2. Press the “OK” key.
Erase Width Adjustment
Settheinitialsettingoftheamountoftheeraseareawiththisprogram.
When the “ERASE WIDTH ADJUSTMENT.” key is pressed, the
following display will appear.
KEY OPERATOR PROGRAMS
ERASE WIDTH
OK
ADJUSTMENT.
SET THE INITIAL ERASE WIDTH.
EDGE ERASE
CENTRE ERASE
(0~20)
mm
(0~20)
10
10
mm
1. Adjust the values for the edge erase mode and centre
erase mode using the
and
keys.
●
The values can be set from 0 mm to 20 mm in 1 mm increments
(0" to 1" in 1/8" increments).
2. Press the “OK” key.
8-16
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Initial Status Setting
Thecopierwillassumetheinitialsettingswhenitisturnedon,whenthe
CA
CLEAR ALL ( ) key is pressed, or when the auto clear interval has
elapsed after a copy run. Use this program to establish the initial
settings.
When the “INITIAL STATUS SETTING.” key is pressed, the following
display will appear.
KEY OPERATOR PROGRAMS
INITIAL STATUS SETTING.
OK
SET THE INITIAL STATUS.
ESTABLISH NEW INITIAL
SETTINGS.
1/4
1/4
RETURN TO THE FACTORY DEFAULT
SETTINGS.
To establish new initial settings
1. Press the “ESTABLISH NEW INITIAL SETTINGS.” key.
2. Select all initial settings on the operation panel.
●
The following functions cannot be set:
Number of copies, XY zoom, automatic copy ratio selection,
interrupt, specialfunctions, information, staplingposition(foran
optional finisher (AR-FN1N only)) and LCD contrast.
3. Press the “OK” key.
To return to the factory default settings
Pressthe“RETURNTOTHEFACTORYDEFAULTSETTINGS.”
key.
Stream Feeding Mode
This program is used to enable the stream feeding mode of the
documentfeeder.Whenthestreamfeedingmodeisenabled,additional
originals which are set in the document feeder tray within 5 seconds
afterthepreviousoriginalwasfedwillbefedandcopiedautomatically.
To enable the stream feeding mode, press the check box of
“STREAM FEEDING MODE.” to display a check mark in the
check box.
To disable this mode, press the check box of this program
again to clear the check mark in the check box.
●
Thestreamfeedingmodewillonlyfunctionwhenthegroupmodehas
been selected.
8-17
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Staple Position Setting
Thisprogramisusedtoselecttheinitialstaplingpositionforanoptional
finisher (AR-FN1N only).
Whenthe“STAPLEPOSITIONSETTING.”keyispressed,thefollowing
display will appear.
KEY OPERATOR PROGRAMS
STAPLE POSITION
OK
SETTING.
1. Select the desired stapling position on the touch panel.
2. Press the “OK” key.
Date Format Setting
This program is used to set the initial date format for the date function.
When the “DATE FORMAT SETTING.” key is pressed, the following
display will appear.
KEY OPERATOR PROGRAMS
DATE FORMAT SETTING.
OK
23 March, 2000
March 23, 2000
23/03/00
03/23/00
1. Select the desired date format on the touch panel.
●
The date formats displayed on the touch panel may be different
from the illustration above depending on the country or region.
2. Press the “OK” key.
8-18
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Date and Time Adjustment
This program is used to adjust the date and time which will be used for
printing date.
When the “DATE AND TIME ADJUSTMENT.” key is pressed, the
following display will appear.
KEY OPERATOR PROGRAMS
DATE AND TIME ADJUSTMENT.
OK
YEAR
MONTH
3
DAY
23
HOUR
00
MINUTE
00
2000
(
)
00~23
1. Select an item to be adjusted and adjust the value using
the
and
keys.
●
Repeat this step for all desired items.
2. Press the “OK” key.
●
If an invalid date (example: February 31) has been entered in
step 1, the “OK” key will be disabled.
Rotation Copy Setting
If this program is set, the image of originals will rotate when the
orientation of the originals does not match that of the copy paper.
Rotation copy will function only when the auto paper select or auto
copy ratio mode has been selected.
When the STAPLE SORT function is used, rotation copy will not be
performed even if this program has been set.
NOTE:
If the image is rotated in reduction copying, the position of the image
in relation to copy paper will vary with the orientations of the originals
and copy paper.
Original
Copy paper
Copy
To enable rotation copy, press the check box of “ROTATION
COPY SETTING.” to display a check mark in the check box.
To disable this mode, press the check box of this program
again to clear the check mark in the check box.
8-19
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Size Setting for [EXTRA]
The paper sizes in the paper trays (except an optional large capacity
tray) can be changed by the users. The copier senses the paper sizes
withthepapersizeindicatorsinthepapertrays.Ifapapersizeindicator
issetto[EXTRA]andthisprogramisused,thecopiercansensepaper
sizes as selected on the setting screen.
When the “SIZE SETTING FOR [EXTRA].” key is pressed, the
following display will appear.
KEY OPERATOR PROGRAMS
SIZE SETTING FOR
OK
[
]
EXTRA .
PAPER TRAY
1
2
3
4
A3
B4
A4 A4R
EXTRA
B5 B5R A5
AB
INCH
1. Select a paper tray on the touch panel.
2. Select a paper size for [EXTRA] setting.
To select a size of inch series, press the “INCH” key and
select a paper size.
●
Select the paper size which matches the paper to be loaded into
the paper tray.
●
Thissettingcanalsobeusedforpapertraysinanoptionalstand/
500-sheet paper drawer (AR-DE1N).
3. Press the “OK” key.
8-20
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
TIMER SETTINGS
The programs of this category are used to set the timers for some
functions. These programs can be selected by pressing the “TIMER
SETTINGS” key and then selecting the desired program key.
Auto Power Shut-off Timer
The auto power shut-off mode is a function to turn off the power
automatically once a programmed length of time has elapsed without
any copier operation after the last copy of a run is made or power is
turned on.
This function lowers the user’s electricity bill, reduces waste of natural
resources, and cuts down on environmental pollution.
The programmed time is set to 60 minutes for this function on
completion of shipment from the factory. The default time can be
changed optionally within the prescribed range of time. We suggest
you set the most appropriate time according to your usage pattern.
Use this program to set the time interval. The time until auto power
shut-off occurs can be set in 1 minute increments up to a 4 hour
maximum.
When the “AUTO POWER SHUT-OFF TIMER.” key is pressed, the
following display will appear.
KEY OPERATOR PROGRAMS
AUTO POWER SHUT-OFF
OK
TIMER.
SET THE TIME INTERVAL FROM LAST COPY
UNTIL POWER OFF IN 1 MIN. INCREMENTS.
(1~240)
min.
TIME:
60
1. Enter the time interval using the
2. Press the “OK” key.
and
keys.
Auto Clear Setting
Usethisprogramtosetthetimeintervaltoreturnthecopiertotheinitial
settings after the last copy of a run has been completed. The time can
be set from 10 to 240 seconds in 10 second increments.
When the “AUTO CLEAR SETTING.” key is pressed, the following
display will appear.
KEY OPERATOR PROGRAMS
OK
AUTO CLEAR SETTING.
SET THE TIME FOR AUTO CLEAR.
(10~240)
sec.
TIME:
60
CANCEL TIMER
1. Set the desired time interval using the
and
keys.
●
To disable the auto clear, press the check box of “CANCEL
TIMER” to display a check mark in the check box.
2. Press the “OK” key.
8-21
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Preheat Mode Setting
Preheatmodefunctionstocontrolthepowerconsumptionbylowering
the temperature of the fusing unit to a programmed level once a
programmed length of time has elapsed without any copier operation
after the last copy of a run is made or power is turned on. This function
lowers user’s electricity bill, reduces waste of natural resources, and
cuts down on environmental pollution. The programmed time is set to
15minutesforthisfunctiononcompletionofshipmentfromthefactory.
Thedefaulttimecanbechangedoptionallywithintheprescribedrange
of time. We suggest you set the most appropriate time according to
your usage pattern.
This program is used to set the time that elapses before the copier
enters the preheat mode after copying is completed. The interval can
be set between 1 and 240 minutes in 1 minute increments.
Whenthe“PREHEATMODESETTING.”keyispressed, thefollowing
display will appear.
KEY OPERATOR PROGRAMS
OK
PREHEAT MODE SETTING.
SET THE TIME FOR PREHEAT MODE.
(1~240)
min.
TIME:
15
1. Set the desired time interval using the
2. Press the “OK” key.
and
keys.
Noise Level Reduce Mode
When the copier is programmed to enter the noise level reduce mode,
the noise level will be reduced in the standby mode, however, the first
copy time will be several seconds longer when the copier is in this
mode. This program is used to set the time that elapses before the
copier enters the noise level reduce mode after copying is completed.
When the “NOISE LEVEL REDUCE MODE.” key is pressed, the
following display will appear.
KEY OPERATOR PROGRAMS
NOISE LEVEL REDUCE MODE
OK
SET THE TIME FOR NOISE LEVEL REDUCE MODE.
(10~240)
TIME
sec.
CANCEL TIMER
1. Set the time using the
and
keys.
●
To enable the time setting, press the check box of the
“CANCEL TIMER” to clear the check mark in the check box.
2. Press the “OK” key.
8-22
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Message Time Setting
This program is used to adjust the length of time that messages are
displayed in the range of 1 to 12 seconds in 1 second increments.
When the “MESSAGE TIME SETTING.” key is pressed, the following
display will appear.
KEY OPERATOR PROGRAMS
MESSAGE TIME SETTING.
OK
SET THE TIME FOR MESSAGES.
(1~12)
sec.
TIME:
6
1. Set the time using the
2. Press the “OK” key.
and
keys.
8-23
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
ENABLE/DISABLE SETTINGS
The programs of this category are used to enable or disable some
functions. These programs can be set or cancelled by pressing the
check box of each program.
Disabling of Auto Paper Selection
This program is used to prevent automatic paper selection. When
disabled,thecopierwillnotautomaticallyselectapapertraycontaining
paper that matches the size of the original placed on the document
glass or in the document feeder.
To disable auto paper selection, press the check box of
“DISABLING OF AUTO PAPER SELECTION.” to display a
check mark in the check box.
To restore this function, press the check box of this program
again to clear the check mark in the check box.
Disabling of Auto Tray Switching
This program prevents automatic switching between the paper trays.
To disable auto tray switching, press the check box of
“DISABLING OF AUTO TRAY SWITCHING.” to display a
check mark in the check box.
To restore this function, press the check box of this program
again to clear the check mark in the check box.
Disabling of Bypass-Tray in Duplex Copy
Thisprogramisusedtodisabletheuseofthebypasstraywhenmaking
duplex copies.
To disable use of the bypass tray when making duplex
copies, press the check box of “DISABLING OF BYPASS-
TRAY IN DUPLEX COPY.” to display a check mark in the
check box.
To restore use of the bypass tray, press the check box of this
program again to clear the check mark in the check box.
8-24
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Disabling Deletion of Job Programs
This program is used to prevent stored programs from being replaced
or deleted. If this program is set, storing of job programs is also
disabled.
To prevent job programs stored in memory from being
replaced or deleted, press the check box of “DISABLING
DELETION OF JOB PROGRAMS.” to display a check mark in
the check box.
To allow replacement/deletion, press the check box of this
program again to clear the check mark in the check box.
Disabling of Document Feeder
This program is used to prevent the use of the document feeder when
it malfunctions.
To prohibit use of the document feeder, press the check box
of“DISABLINGOFDOCUMENTFEEDER.”todisplayacheck
mark in the check box.
To enable use of the document feeder, press the check box
of this program again to clear the check mark in the check
box.
Disabling of Duplex Copying
This program is used to enable or disable the duplex system. If a
malfunction occurs within the duplex system of the copier, the system
can be disabled until it is serviced. The rest of the copier in the
meantime will remain operable.
To disable the duplex system, press the check box of
“DISABLING OF DUPLEX COPYING.” to display a check
mark in the check box.
To enable the duplex system, press the check box of this
program again to clear the check mark in the check box.
8-25
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Disabling of Stapler
This program is used to enable or disable the stapler of the optional
finisher (AR-FN1N, AR-FN2). If the stapler malfunctions, it can be
disabled to prevent further malfunction or possible damage to the
stapler until it is serviced.
To disable the stapler, press the check box of “DISABLING
OF STAPLER.” to display a check mark in the check box.
To enable the stapler, press the check box of this program
again to clear the check mark in the check box.
Disabling of Covers Mode
This program is used to prevent selection of the COVERS mode.
To disable the COVERS mode, press the check box of
“DISABLINGOFCOVERSMODE.”todisplayacheckmarkin
the check box.
To enable use of the mode, press the check box of this
program again to clear the check mark in the check box.
Disabling of PC/Modem Access
This program is used to determine whether persons other than
persons who know the key operator code number will be permitted
access via a computer or other equipment, either directly or through a
telephone line, to the copier’s key operator programs.
Torequirekeyoperatorcodeentryforaccesstokeyoperator
programs, press the check box of “DISABLING OF PC/
MODEMACCESS.”todisplayacheckmarkinthecheckbox.
To permit remote access to key operator programs without
keyoperatorcodeentry, pressthecheckboxofthisprogram
again to clear the check mark in the check box.
NOTE:
The customers must choose the setting of this program by themselves.
If this program is not set, external operators can access the key
operator programs from a computer or other equipment without key
operator code entry. If this program is set, external operators must
enter the key operator code to access the key operator programs. (This
program is set in the factory default setting.)
8-26
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Disabling of Second Tray Output in Interrupt
This program is used to disable output of copies to the second tray in
interrupt copying for an optional dual tray output unit (AR-TR1).
To disable output of copies to the second tray in interrupt
copying, press the check box of “DISABLING OF SECOND
TRAY OUTPUT IN INTERRUPT.” to display a check mark in
the check box.
To enable output of copies to the second tray, press the
check box of this program again to clear the check mark in
the check box.
Disabling of Auto Power Shut-off Mode
Theautopowershut-offmodeisusedtoturnoffthepowerautomatically
once a programmed length of time has elapsed without any copier
operationafterthelastcopyofarunismadeorpoweristurnedon.This
mode lowers the user’s electricity bill, reduces waste of natural
resources, and cuts down on environmental pollution.
Depending on how the machine is to be used, you may wish for some
reasons to disable this mode. This can be done using this program.
NOTE:
Since we would like you to fully understand the purpose of this mode,
we suggest that you enable this mode and set the most appropriate
timeusingprogram“AUTOPOWERSHUT-OFFTIMER”(page8-21).
To disable the auto power shut-off mode, press the check
box of “DISABLING OF AUTO POWER SHUT-OFF MODE.” to
display a check mark in the check box.
To restore the mode, press the check box of this program
again to clear the check mark in the check box.
Disabling of Beep When Keys Touched
This program is used to enable or disable the beep function. If this
function is enabled, a beep sound will be produced when you press a
key on the operation panel including the touch panel.
To disable the beep function, press the check box of
“DISABLING OF BEEP WHEN KEYS TOUCHED.” to display
a check mark in the check box.
To enable the beep function, press the check box of this
program again to clear the check mark in the check box.
8-27
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR PROGRAMS
Disabling of Bypass-Tray When Offset Tray Selected
This program is used to disable the use of the bypass tray when the
offset tray is selected for an optional finisher (AR-FN2 only).
To disable use of the bypass tray when the offset tray is
selected, press the “DISABLING OF BYPASS-TRAY WHEN
OFFSET TRAY SELECTED.” box to display a check mark.
To restore use of the bypass tray, press the checked box
again to clear the check mark.
OTHER PROGRAMS
Thefollowingtwoprogramsarenotincludedinthefourcategories.The
programs can be selected by pressing the relevant key on the touch
panel after the key operator program mode is selected.
Total Count
Thisprogramisusedtodisplaythetotalcounts,includingcountsofthecopier,
document feeder, duplex module, and stapler.
An A3 (11" x 17") copy is counted as two copies.
Covers and transparency inserts are counted as one copy even if they are
blank.
The lists printed with the key operator programs are included in “OTHERS”.
Whenthe“TOTALCOUNT.”keyispressed,thefollowingdisplaywillappear.
KEY OPERATOR PROGRAMS
TOTAL COUNT.
OK
COPIES
: 022,500
: 012,000
DOCUMENT
FEEDER
DUPLEX
: 007,500
: 003,000
: 000,500
STAPLER
OTHERS
PRINT
The total counts for all units in use will be displayed.
To print these counts, press the “PRINT” key.
Press the “OK” key to exit the program.
Program List Printout
This program is used to print out the list of available key operator
programs.
Press the “PROGRAM LIST PRINTOUT.” key.
●
Thecopierwillstartprinting. Tostopprintingafterstarting, press
the “CANCEL” key.
8-28
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR ASSISTANCE CALL
When the copier is in need of service or care not usually performed
by general users, the copier will stop and one of the following
messages listed below will appear.
Message
Remedy
CHECK STAPLER POSITION OR STAPLE JAM.
See page 7-12 (AR-FN1N) or 7-27 (AR-FN2) for staple jam
removal. If the trouble cannot be easily remedied, use key
operator program “DISABLING OF STAPLER” (page 8-26)
to prevent the use of the stapler.
Contact your authorised Sharp Service Centre for service.
THE FINISHER IS OUT OF SERVICE.
PRESS [CA] TO CANCEL JOB.
Contact your authorised Sharp Service Centre for service.
(This message will appear when an optional finisher (AR-
FN1N, AR-FN2) malfunctions.)
DUPLEX SYSTEM IS OUT OF SERVICE.
Use key operator program “DISABLING OF DUPLEX
COPYING” (page 8-25) to prevent the use of the duplex
system. Contact your authorised Sharp Service Centre for
service.
THE DOCUMENT FEEDER IS OUT OF SERVICE. Use key operator program “DISABLING OF DOCUMENT
PRESS [CA] TO CANCEL JOB.
FEEDER” (page 8-25) to prevent the use of the document
feeder. Contact your authorised Sharp Service Centre for
service.
SELECTED PAPER TRAY IS OUT OF SERVICE. Contact your authorised Sharp Service Centre for service.
PLEASE SELECT ANOTHER PAPER TRAY.
CALL FOR SERVICE. CODE:
With this message, an alphanumeric code will appear to
indicate a malfunction has occurred which cannot be
corrected by the key operator.
Contact your authorised Sharp Service Centre for service.
Be sure to report the alphanumeric code information as
well. This will enable the Service Centre to prepare to
correct the malfunction associated with the code.
8-29
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
8-30
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY OPERATOR CODE NUMBER:
FACTORY SETTING
The following is the factory setting of the Key Operator Code
Number, which must be used to access the Key Operator
Program.
Factory setting = 00000
This number must be entered when accessing the Key
Operator Program for the first time. (See page 8-2.)
NOTE:
The Key Operator Code Number is an important security
number allowing the Key Operator to configure the copier’s
functions and auditor’s settings.
You should register your own code number — different from
the factory setting above — immediately after your copier is
installed.
★ KEY OPERATOR
Detach this page and store it in a safe place.
8-31
Download from Www.Somanuals.com. All Manuals Search And Download.
2000C
DSC1
CINSE1954FC51
Download from Www.Somanuals.com. All Manuals Search And Download.
Required in IEC-950 (EN 60 950) - Europe
• The equipment should be installed near an accessible socket outlet for easy disconnection.
Required in Appendix ZB of BS 7002 (En 60 950) — United Kingdom
MAINS PLUG WIRING INSTRUCTIONS
The mains lead of this equipment is already fitted with a mains plug which is either a non-rewireable
(moulded) or a rewireable type. Should the fuse need to be replaced, a BSI or ASTA approved fuse
to BS1362 marked
be used.
or
and of the same rating as the one removed from the plug must
Always refit the fuse cover after replacing the fuse on the moulded plug. Never use the plug without
the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied
either cut-off the moulded plug (if this type is fitted) or remove by undoing the screws if a rewireable
plug is fitted and fit an appropriate type observing the wiring code below.
DANGER: The fuse should be removed from the cut-off plug and the plug destroyed immediately
and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted
elsewhere into a 13A socket outlet as a serious electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:
GREEN-AND-YELLOW: Earth
BLUE:
BROWN:
Neutral
Live
As the colours of the wires in this mains lead may not correspond with coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND YELLOW must be connected to the terminal in the plug
which is marked with the letter E, or by the safety earth symbol Å@, or coloured green or green-
and-yellow.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter
N or coloured black.
The wire which is coloured BROWN must be connected to the terminal which is marked with the
letter L or coloured red.
If you have any doubt, consult a qualified electrician.
WARNING: THIS APPARATUS MUST BE EARTHED.
Download from Www.Somanuals.com. All Manuals Search And Download.
AR-287/AR-337/AR-407
SHARP ELECTRONICS (U.K.) LTD.
Sharp House, Thorp Road, Newton Heath, Manchester
M40 5BE
SHARP CORPORATION
PRINTED IN JAPAN
2000C
DSC1
CINSE1954FC51
Download from Www.Somanuals.com. All Manuals Search And Download.
|