USER GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
• Screen layout illustrated in this user guide may differ
from the actual one.
The information described in this user guide is
subject to change without notice.
Licensed by Inter Digital Technology Corporation under one
or more of the following United States Patents and/or their
domestic or foreign counterparts and other patents pend-
ing, including U.S. Patents: 4,675,863: 4,779,262:
4,785,450 & 4,811,420.
• All the functions described in this user guide may not
be supported in all networks.
• We assume no responsibility for downloaded
contents, information, etc. from network.
Licensed under U.S. Patent 4,558,302 and foreign counter-
parts.
T9 Text Input is covered by the United Kingdom Pat.
No.2238414B, Euro. Pat. No. 0 842 463 (96927260.8) and
other patents pending.
Copyright
According to copyright laws, the reproduction,
alteration and use of material which is protected by
copyright (music, pictures, etc.) is only permitted for
personal or private use. If the user is not in possession
of more extensive copyright or has not received the
explicit permission from the copyright owner to
reproduce, alter or use a copy which has been made or
modified in this way, this is considered to be a violation
of the copyright laws and gives the copyright owner the
right to claim for damages. For this reason, avoid the
illegal use of material which is protected by copyright.
Windows is a registered trademark of Microsoft
Corporation in the United States and/or other countries.
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Useful functions and services of the
phone
Your phone offers you the following features:
• The built-in digital camera can take pictures.
• Create and read SMS.
• Multimedia Messaging Service (MMS) can
personalise your phone in various ways: you can send
and receive multimedia messages with graphical
images, photographs or sound attached.
• WAP browser helps you to access a variety of
information on the mobile internet.
• Colour display makes the screens clearer, more
beautiful and easier to view.
• You can create the various melodies for your original
ringing tones using up to 16 chords.
• Voice memo function allows you to record and play
back your vocal message.
3
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction ................................................. 1
Useful functions and services of the phone ..3
Table of Contents ........................................ 4
Your Phone .................................................. 7
Accessories....................................................7
Getting Started ............................................ 8
Inserting the SIM Card and the Battery .....10
Charging the Battery ..................................13
Turning Your Phone On and Off ...............14
Display Indicators ......................................15
Call Functions ........................................... 18
Making a Call .............................................18
Speed Dialling ............................................18
Redialling ...................................................19
Ending a Call ..............................................19
Answering a Call ........................................19
Incall Menus ...............................................20
Phonebook ................................................. 23
Entering Characters ....................................23
Creating a New Entry .................................24
Finding a Name and Number .....................27
Editing Phonebook Entries ........................ 27
Deleting Phonebook Entries ...................... 28
Checking Your Own Numbers .................. 28
View Groups .............................................. 28
Memory Status ........................................... 29
Speed Dial List .......................................... 29
Sending Messages ..................................... 30
Using the Menu ..........................................31
List of Menu Functions ............................. 31
Camera ......................................................33
Using the Timer ......................................... 35
Sending Pictures ........................................ 36
Deleting Pictures ....................................... 36
My Phone ....................................................37
Image Gallery ............................................. 37
Sound Gallery............................................. 39
Text Templates ........................................... 42
Memory Status............................................ 43
Fun & Games .............................................44
Games......................................................... 44
Melody Editor............................................. 45
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Tone Editor .................................................52
Profiles ...................................................... 56
Activating a Profile ....................................56
Customising Profiles ..................................56
Resetting Profile Settings ...........................57
Ringer Volume ...........................................57
Ringer Type ...............................................57
Vibration ....................................................58
Keypad Tones ............................................58
Warning Tone ............................................59
Power On/Off Sound .................................59
Message Alert ............................................60
Low Battery Alert ......................................61
Any Key Answer .......................................61
Organiser ................................................... 62
Calculator....................................................62
Calendar .....................................................63
Clock & Alarm ...........................................64
Voice Memo ...............................................68
Help List .....................................................69
Call Manager .............................................. 70
Call Register ..............................................70
Call Timers .................................................71
Call Costs ....................................................72
Data Counter ...............................................74
Diverts.........................................................74
Settings .......................................................76
Phone Settings ............................................76
Call Settings ...............................................80
Network Settings ........................................83
Internet Settings ..........................................85
Infrared........................................................89
Security .......................................................89
Master Reset................................................94
Browser ......................................................95
Setting up for the WAP browser ................95
Viewing the WAP Browser.........................95
Navigating a WAP Page .............................95
Bookmarks ..................................................96
Messages ....................................................98
MMS (Multimedia Messaging Service) .....98
SMS (Short Message Service) .................105
Cell Broadcast ...........................................109
Cell Information........................................110
Data Transmission ...................................111
System Requirements ...............................111
5
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation and Setup ...............111
Using the Modem Setup ...........................111
Troubleshooting ...................................... 113
Safety Precautions and Conditions of
Use ............................................................ 115
CONDITIONS OF USE ...........................115
ENVIRONMENT ....................................117
PRECAUTIONS CONCERNING VEHICLE
USE ..........................................................117
Index ......................................................... 119
Quick Reference ...................................... 124
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Your Phone
Please check the following carefully. Your phone
should come complete with:
• GSM 900/1800 GPRS phone
• Rechargeable Li-ion battery
• AC charger
• Hands free
• CD-ROM
• User guide
Accessories (option)
• Li-ion spare battery (XN-1BT10)
• Cigarette lighter charger (XN-1CL10)
Some of the above accessories may not be offered by
region.
For details, please contact your dealer.
7
Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Earpiece
9. LED Indicator
2. Hands free Connector
3. Navigation Keys (Arrow Keys):
10. Screen Display
11. Right Soft Key:
Executes the function at the
bottom right on the screen.
Move the cursor to select
menu items, adjust the
earpiece volume, etc.
12. End/Power Key:
Ends a call, turns power on/
off.
Up/Down arrow keys: Searches the Phonebook
entries in stand-by mode.
13. Keypad
14. Microphone
Left arrow key:
Adjusts the earpiece
volume in stand-by mode.
15. External Connector: Used to connect the
charger.
Right arrow key:
Displays the Phonebook
menu in stand-by mode.
16. Infrared Port:
Sends and receives data via
infrared.
4. M Key:
Displays the Main Menu
and executes the functions.
17. Speaker
18. Camera
5. Left Soft Key:
Executes the function at the
bottom left on the screen.
19. Mirror:
For self portraits.
20. Battery Cover
6. Send Key:
Makes or accepts calls,
views the call history in
stand-by mode.
7. Voice Mail Key:
Used to connect to Voice
mail centre. (Depends on
the SIM card.)
8. * /Shift Key:
Used to enter * or switch
the text mode.
9
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Position the SIM card with the gold contacts facing
Inserting the SIM Card and the
Battery
down, and slide the SIM into the SIM holder.
1. Slide off the battery cover.
SIM card
4. Slide the SIM lock lever to the right until the SIM is
locked.
2. Slide the SIM lock lever to the left.
SIM lock lever
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
10
5. Hold the battery so that the metal contacts of the
6. Replace the battery cover so that the marks are
battery are facing down and the guides on the top of
aligned and slide it as shown.
the battery slide into the battery slots
insert it
, and then
.
Note
• Make sure that only 3V SIM cards are used.
• Use only the approved battery (XN-1BT10).
11
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing the SIM Card and the Battery
3. Slide the SIM lock lever to the left.
SIM lock lever
1. Make sure to turn off your phone and disconnect
charger and other accessories. Slide off the battery
cover.
4. Remove the SIM card from the SIM holder.
2. Pick up the battery using the protruding edge and
remove the battery from the phone.
Battery Disposal
The device is supported by a battery. In order to protect
the environment, please read the following points
concerning battery disposal:
• Take the used battery to your local waste depot,
dealer or customer service centre for recycling.
• Do not expose the used battery to an open flame, into
water or dispose with the household waste.
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
12
The LED indicator lights in red.
Standard charging time: Approx. 2 hours.
Charging the Battery
You must charge the battery for at least 2 hours before
using your phone for the first time.
Note
• Charging time may be longer than above depending
on the state of a battery and a surrounding situation.
(See “Battery” on page 116.)
To Charge Using the Charger
1. Connect the charger to the external socket located
on the bottom of the phone with the charger’s
“PUSH TOP” mark facing towards you, and to an
AC outlet.
To disconnect the charger
Push and hold the side buttons of the charger, then
disconnect the charger from the external socket of the
phone.
LED
indicator
2. When charging is complete, the LED indicator turns
off. Unplug the charger from the AC outlet, then
unplug the charger connector from the phone.
Note
• Do not use any non approved charger, this may
damage your phone and invalidate any warranty,
please see “Battery” on page 116 for details.
• When the phone is charging, the animated battery
status icon (
) will be displayed in the upper right
of the screen.
To Charge Using the Cigarette Lighter Charger
The cigarette lighter charger (option) supplies power
for charging from the cigarette lighter socket of a car.
13
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Level Indicator
The current battery level is displayed in the upper right
hand side of the screen.
Turning Your Phone On and Off
To turn the power on, press and hold
approximately 2 seconds.
for
Low Battery During Use
The stand-by screen appears.
When the battery is running low, an alarm will sound
To turn the power off, press and hold
approximately 2 seconds.
for
and the “
” will appear on the screen.
If you are using your phone and you hear the “low
battery” alarm, attach your charger as soon as possible.
The phone may not be able to continue normal
operation if you continue to use it. The battery may only
last five minutes before the phone itself powers down
during a call.
Entering the PIN Code
If activated you will be asked to enter a PIN (Personal
Identification Number) code after turning on your
phone.
1. Enter your PIN code.
2. Press
.
Charge Level
Indicators
Note
Full level (greater than 60%)
• If your PIN code is entered incorrectly three times in
a row, the SIM card is locked. See “Enabling/
Disabling the PIN Code” on page 89.
Partial level (less than 60%)
Partial level (less than 30%)
Low level (less than 10%)
Empty
Charging the battery is
recommended.
Charge the battery.
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
14
• GX1 has a built-in aerial.
As with any other radio
Display Indicators
transmitting device, do not touch
the aerial unnecessarily when your
phone is switched on. Contact with
the aerial affects call quality and
may cause the phone to operate at
a higher power level than
Status
Indicators
otherwise needed. Not touching the
aerial area during a phone call
optimises aerial performance and
the talktime of your phone.
Left
Right softkey
softkey
15
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
2.
3.
/
/
:
Indicates the strength of received
signal/the service is out of range.
10.
:
:
Indicates a Phonebook entry stored on
the SIM card.
:
Appears when in call or being in data
communication in CSD.
11.
12.
:
Indicates the battery level.
Appears when your phone is roaming
outside of your network.
/
/
:
Indicates the input mode (Upper case
only the first letter of the word mode/
Upper case mode/Lower case mode/
Numeric mode).
13.
14.
15.
:
:
Appears when your phone is in data
communication mode.
Appears when your phone is in fax
communication mode.
4.
5.
6.
:
/
/
Appears when the T9 text input mode
is activated.
:
:
Appears when your phone is GPRS
enabled and within range.
/
:
: Appears when a new SMS, MMS
Alert or WAP Alert has arrived.
Flashes during GPRS transmission.
16.
17.
Appears when Alarm is set.
Appears when viewing secured WAP
browser.
:
Appears when “Divert” (p. 74) is set
to “All Calls”.
7.
8.
:
/
Appears when the keypad is locked.
18.
19.
:
:
Appears when “Ringer Volume”
(p. 57) is set to “Silent”.
:
Appears when an image or sound is
attached to MMS.
Appears when Vibration alert is set.
9.
:
Indicates a Phonebook entry stored in
the phone memory.
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
16
20. (No display)/
/
/
/
:
Indicates the phone’s mode (Normal
mode/Activity mode/Meeting mode/
Car mode/Silent mode).
21.
22.
:
Appears when up, down, right or left
navigation is available.
/
:
Appears when “Infrared” is on/during
connection.
Softkey Indicators
To execute the operation indicated, press each
corresponding key.
23. Area at the lower left of a screen:
Displays the operation executed by
left softkey.
24.
:
Used to display the menu screen in
stand-by mode.
25. Area at the lower right of a screen:
Displays the operation executed by
right softkey.
17
Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
International Calls
Call Functions
1. Press and hold
until a “+” (international
dialling prefix) sign appears.
Making a Call
1. Enter the area code and the phone number you wish
2. Enter the country code, followed by the area code
and the number.
to dial.
If you enter the wrong number, press
to delete the number to the left of the cursor.
2. Press to dial.
[Clear]
3. Press
to dial.
Note
• Enter the area code omitting the first 0 when making
international calls, in most cases. (It differs for some
countries.)
Emergency Calls
1. Enter 112 (international emergency number) using
the keypad.
Speed Dialling
2. Press
to dial.
In the Speed Dial List, up to 9 phone numbers out of the
Phonebook can be set. You can call the numbers using
Note
the digit keys (
to
and
).
• Emergency calls may not be available on all mobile
phone networks when certain network services and/
or phone features are in use. Contact your network
operator for more information.
• This Emergency number can normally be used to
make an emergency call in any country, with or
without a SIM card inserted, if a GSM network is
within range.
For details on setting the Speed Dial List, see “Speed
Dial List” on page 29.
1. Press and hold any of the digit keys (
and ).
to
The phone number stored in the Speed Dial List
appears.
Note
• Memory location 1 (
Mail access number.
) is reserved for your Voice
Call Functions
Download from Www.Somanuals.com. All Manuals Search And Download.
18
2. Press
or
or
to select “Settings”, then press
.
Redialling
You can redial the numbers in the call register list that
you may have missed, received or dialled. Each list can
contain up to 10 numbers.
3. Press
to select “Call Settings”, then press
.
4. Press
or
to select “Auto Redial”, then press
1. Press
during stand-by.
.
2. Press
or to select a category between
5. Select “On” to enable the Auto Redial function or
“Off” to disable it, then press
“Dialled Numbers”, “Missed Calls” and “Received
Calls”.
.
Note
3. Select the number you wish to call by pressing
• When you receive an incoming call, the Auto Redial
function will be interrupted.
• Automatic redialling is not available for fax and data
calls.
or
.
4. Press
to redial the call.
Tip
• You can also confirm call records by pressing
stand-by mode.
in
or
Ending a Call
1. Press
to end the call.
•
You can switch between histories by pressing
in step 2 only when you enter by in stand-by
mode.
Answering a Call
When an incoming call is detected, the phone rings and
the LED indicator flashes green.
Automatic Redialling
This setting allows you to automatically redial the
number if the first attempt was unsuccessful.
1. Press
to answer the call.
or
If you wish to stop redialling, press
or
[End].
Press any key except
when the “Any Key Answer” function is
enabled.
,
[Reject],
and
To Set the Auto Redial Function
1. Press
to display the Main Menu.
19
Call Functions
Download from Www.Somanuals.com. All Manuals Search And Download.
Set the Any Key Answer function in the profile in
each mode. (p. 61)
Incall Menus
Your phone has additional functions available whilst a
call is in progress.
Tip
• If you have subscribed to the Calling Line
Identification (CLI) service and the caller’s network
sends the number, the caller’s number will appear on
the screen. If the caller’s name and number are
stored in the Phonebook, the caller’s name will
appear on the screen.
• If the number is a restricted number, the display
shows “Withheld”.
• When receiving a call from the person whose picture
is registered in the Phonebook, receiving display and
the picture are displayed alternately.
Adjusting the Earpiece Volume
You can adjust the earpiece volume during a call.
1. During a call, press
2. Press to increase the earpiece volume or press
to decrease the earpiece volume.
Each press of or adjusts the earpiece volume
by one of 5 levels.
3. Press [OK].
.
Putting a Call on Hold
This function allows you to manage two calls at the
same time. If you wish to make another call whilst you
are talking to someone, you can put the current call on
hold to call someone else.
Rejecting an Incoming Call
You can reject a call you do not wish to answer.
1. Press
ringing.
or
[Reject] whilst the phone is
To make another call during a call
The caller hears a busy tone or is diverted to
voicemail if this is activated.
1. During a call, press
[Options] to display the
Options Menu.
2. Select “Hold”, then press
.
The current call is put on hold.
To retrieve a call, press
[Options] and select
“Retrieve”, then press
.
Call Functions
Download from Www.Somanuals.com. All Manuals Search And Download.
20
3. Enter the phone number you wish to make another
• If you do not wish to answer the second call, press
[Reject] in step 1. The call details of the second
call will be saved as a missed call.
call.
Tip
• You can also make another call by entering the phone
number during a call instead of steps 1 and 2. The
current call is automatically put on hold.
Conference Call
Conference call is a call with more than 2 participants.
You may include up to 5 participants in a conference
call.
Call Waiting
This service notifies you of another incoming call
whilst you have a call in progress.
Making a Conference Call
To make a conference call, you must have one active
call and one held call.
1. During a call, press
[Answer] to answer the
second call.
1. Press
[Options] to display the Options Menu.
The first call is put on hold and you can now talk to
the second caller.
2. Press
or
to select “Multiparty”, then press
.
2. Press
[Options] and select “Swap” to switch
3. Press
or
to select “Join All”, then press
between the two calls.
to join the conference call.
4. Press to end the conference call.
Note
• Conference call service may not be available on all
networks. Contact your network operator for more
information.
3. Press
then press
the held call.
[Options] and select “End Call”,
to end the current call and return to
Note
• You need to set “Call Waiting” to “On” if you use
Call Waiting service (p. 80).
• Call Waiting service may not be available on all
networks. Contact your network operator for more
information.
Adding New Participants to the Conference Call
1. Press
[Options] to display the Options Menu.
or to select “Dial”, then press
2. Press
.
21
Call Functions
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Enter the number you wish to include in the
2. Press
[Options] to display the Options Menu.
conference call.
3. Press
or
to select “Multiparty”, then press
4. Press
to dial.
.
5. Press
[Options] to display the Options Menu.
4. Press
or
to select “Private”, then press
.
6. Press
or
to select “Multiparty”, then press
5. Once you have finished the private conversation,
.
press
then press
[Options] and select “Multiparty”,
.
7. Press
or
to select “Join All”, then press
to join the conference call.
6. Press
or
to select “Join All”, then press
to return to the conference call.
If you wish to add other participants, repeat steps 1
to 7.
Muting the Microphone
To End the Call with a Conference Call Participant
1. During a call, press
microphone.
[Mute] to mute the
1. During a conference call, select the person who you
wish to disconnect the call by pressing
or
[Options] to display the Options Menu.
or to select “End Call”, then press
.
To unmute the microphone, press
[Unmute].
2. Press
3. Press
.
To Have a Private Conversation with one of the
participants
If you wish to have a private conversation with one of
the participants, you may select the participant from the
conference list and put the other participants on hold.
1. During the conference call, select the person that
you wish to talk to by pressing
or
.
Call Functions
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Lower Case
Characters
Phonebook
You can store the phone numbers and E-mail addresses
of your friends, family and colleagues in the
Phonebook.
Key
Upper Case Characters
Numeric
JKL5
jkl5
5
6
7
8
9
0
MNO6ÕÓÔÒÖØÑ
PQRS7
mno6õóôòöøñ
pqrs7ß
Group name (p. 25)
You can classify the phone numbers and names stored in
the Phonebook, such as “Family” and “Business”.
TUV8ÚÜÙÛ
WXYZ9ÝÞ
tuv8úüùû
wxyz9ýþ
Entering Characters
When entering characters to create Phonebook entries,
SMS or MMS, etc., press the corresponding keys.
(space)+ = < >
*+P?
£ $ ¥ % &0
Table of Characters
Pressing each key scrolls characters in the following
order.
(space)
Normal Mode
Lower Case
-
: Press and hold to enter 0 - 9 numbers.
Key
Upper Case Characters
Numeric
Characters
(hyphen) ? !
(apostrophe) @ _ ( ) / ” :1
:
Press and hold to shift text type/number
input mode, Capital letter, Small letter,
Numeric.
.
’
(full-stop)
,
(comma)
-
1
ABC2ÃÁÀÂÄÅÆÇ
DEF3ÉÊÈË
abc2ãáàâäåæç
def3éêèë
2
3
4
:
Press and hold to shift between Normal
and T9 mode.
GHI4ÍÎÌÏ
ghi4íîìï
23
Phonebook
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Input Mode
To change the input mode, press
approximately 2 seconds.
Using Text Template
You can use the sentences registered in the Text
Templates when entering characters.
for
For details on creating the text template, see “Adding
Phrases to the Text Templates” on page 42.
T9 Text Input
T9 text input method is a shortcut to enter text easily
and quickly.
1. Press
[Options] to display the Options Menu.
1. Press and hold
until “
”
is displayed.
2. Press
or to select “Insert Template”, then
press
.
2. Press each key once for any letter you require on
that key.
3. Select a desired text template by pressing
, then press
or
To enter the word “How”, press
.
.
3. Press
or
until the correct word is shown if
The selected text template will be inserted.
the character combination, that was initially
displayed, is not correct.
Creating a New Entry
You can choose either the phone (up to 200) or SIM
card memory locations to store the new entry.
4. Press
to select the word.
Note
The amount of phone numbers that you can store to the
SIM card is dependant on its capacity. Contact your
network operator for SIM details.
• If the correct word is not shown in step 3, enter the
correct word again after switching to the normal
input mode.
Phonebook Memories
Select the location for storing the Phonebook memory
before storing a new entry.
Tip
• If you press
instead of step 4, a space is
inserted next to the selected word.
1. Press
to display the Phonebook menu.
or to select “Settings”, then press
Symbols and Punctuation
2. Press
.
To enter symbols or punctuation, press
.
Phonebook
24
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press
or
to select “Save Nos. to”, then press
6. Select a desired number type by pressing
or
,
.
then press
.
4. Select “SIM Card” to store the entry on the SIM
memory or “Phone Memory” by pressing or
, then press
7. Press
[Save].
You can divide the phone numbers of the
Phonebook into groups. You can also register E-
.
mail address, personal data, and picture/image data.
(See “Storing Optional Data” for details.)
Repeat steps 2 to 7 to store the second and third
phone numbers, if required.
When selecting “Choice”, you can choose SIM card
or phone memory every time you store a new
Phonebook entry.
Storing Names and Numbers
Storing Optional Data
1. Press
to display the Phonebook menu.
You can store optional data after entering a phone
number. (See “Storing Names and Numbers” for
details.)
2. Press
or to select “Add New Name”, then
press
.
If you select “Choice” in step 4 in “Phonebook
Memories” on page 24;
Note
• E-mail address, personal data, and picture/image
data cannot be stored on the SIM card.
3. Select “SIM Card” or “Phone Memory” by pressing
or
The name entry prompt appears.
4. Enter a name, then press
, then press
.
Selecting Group Name
1. Press
or
to highlight the right side of
.
“
”, then press
.
For details on entering characters, see “Entering
Characters” on page 23.
The phone number prompt appears.
2. Select a desired group name by pressing
then press
or
,
.
You can set to display the available group names
when you store/edit the Phonebook, see “View
Groups” on page 28.
5. Enter the phone number, then press
.
Up to 40 digits can be entered.
25
Phonebook
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering E-mail Address
9. To determine what part of the picture is chosen to be
displayed, select it by pressing
then press
,
,
or
,
3. Press
or
to highlight the right side of
.
“
”, then press
.
4. Enter the E-mail address, then press
.
Note
• The stored picture/image are automatically saved
under the “in Phonebook” section of the Image
Gallery.
• The picture/image cannot be deleted in the Image
Gallery. Remove the picture/image data from the
Phonebook.
Up to 60 characters can be entered.
Entering Personal Data
5. Press
or
to highlight the right side of
“
”, then press
.
6. Enter the personal data, then
.
Up to 60 characters can be entered.
Adding the Phone Number from the Call
Register Entries
Storing Picture/Image Data
You may store a picture/image for use with the
Phonebook.
1. Display the call register entry you wish to store
(p. 70).
2. Press
.
When you receive a call from a person with a
Phonebook entry which also has a linked picture/image,
when the person calls, the linked picture/image will be
displayed.
3. Press
or
.
to select “Save to Phonebook”, then
press
4. Follow the procedure from step 3 in “Storing Names
7. Press
or
to highlight the right side of
and Numbers” on page 25.
“
”, then press
.
Storing after Inputting a Phone Number
8. Select the desired picture/image, then press
.
1. Enter the phone number, then press
[Save].
The selected picture/image will appear on the
screen.
2. Follow the procedure from steps 2 to 7 in “Storing
Names and Numbers” on page 25.
Phonebook
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
• If you press
can also search the name.
• You can also dial the desired phone number by
pressing the digit key corresponding to the list
number instead of step 6.
Finding a Name and Number
Two methods of searching through the Phonebook are
available:
and select “Search” after step 2, you
Search by Name
1. Press
to display the Phonebook menu.
2. Select “View Names”, then press
.
Search in Alphabetical Order
3. Enter the first character(s) of the name.
1. Press
or
whilst in stand-by to open the
Matched results will be displayed alphabetically.
If there is no entry in the Phonebook that satisfies
the exact search criteria, the name that is nearest
alphabetically matching will be displayed.
The number corresponding to the name highlighted
is shown above.
Phonebook.
2. Scroll the list by pressing
or
to find the
desired name.
3. If you wish to do a name search, perform steps 3 and
4 in “Search by Name” .
4. Scroll through list by pressing
or
to select
Editing Phonebook Entries
the desired name, then press
[Select].
You can edit Phonebook entries.
The detailed screen of the Phonebook appears.
1. Search for the desired Phonebook entry.
5. Press
.
For details on searching through Phonebook entries,
see “Finding a Name and Number”
6. Press
or
to select the desired phone number,
to dial.
then press
2. Press
.
3. Press
or
to select “Edit”, then press
.
4. Select an entry you wish to change by pressing
or , then press [Edit].
27
Phonebook
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Edit entry as required.
6. Press
If you wish to edit another item, repeat steps 4 to 6.
3. Press
or
to select the phone number you
wish to check from either “Voice”, “Data” or “Fax”,
then press
Press
.
.
to return to the stand-by screen.
7. Press
[Save] to save the change(s).
Note
• “Data” or “Fax” may not be displayed depending on
SIM card.
Deleting Phonebook Entries
1. Search for the desired Phonebook entries.
Editing Your Phone Numbers
For details on searching through Phonebook entries,
see “Finding a Name and Number” on page 27.
1. Perform steps 1 to 3 in “Checking Your Own
Numbers” .
2. Press
.
2. Press
.
3. Press
or
to select “Delete”, then press
.
3. Press
[Clear] to erase the phone number and
4. Select “Yes”, then press
.
enter a new phone number.
The selected entry will be deleted.
To cancel deletion, select “No” at step 4, then press
.
4. Press to save the phone number.
View Groups
Checking Your Own Numbers
You can check and edit your own voice, data and fax
phone numbers in the Phonebook.
You can set the available group names when you store/
edit the Phonebook.
1. Press
to display the Phonebook menu.
or to select “Settings”, then press
1. Press
to display the Phonebook menu.
2. Press
.
2. Press
or to select “Own Numbers”,
3. Select “View Groups”, then press
.
then press
.
Phonebook
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select a desired group name by pressing
.
Speed Dial List
“
” indicates that the group has been selected.
You can set a maximum of 9 phone numbers to the
Speed Dial List.
To cancel the selected group, press
The checkbox becomes blank again.
again.
Adding Phonebook entries to the Speed Dial
List
Press
to return to the stand-by screen.
1. Search for the desired Phonebook entries.
Memory Status
For details on searching through Phonebook entries,
see “Finding a Name and Number” on page 27.
This function helps you to check the number of entries
stored in the Phonebook.
2. Press
or
to select the phone number.
1. Press
to display the Phonebook menu.
3. Press
.
2. Press
or
to select “Settings”, then press
to select “Memory Status”, then
.
4. Press
or
to select “Add to Speed”, then press
3. Press
or
.
press
.
5. Select the number you wish to add by pressing
or , then press
You can check the following memory status.
“SIM Card : xxx/xxx”
“Speed Dial : xx/xx”
.
Viewing the Speed Dial List
1. Press
to display the Phonebook menu.
“Phone
Press
: xxx/200”
to return to the stand-by screen.
2. Press
or
to select “Settings”, then press
to select “Speed Dial List”, then
.
Note
3. Press
or
• The number of locations available on the SIM is
dependant on its capacity.
press
.
The stored names and phone numbers in the
selected entry are displayed in order.
29
Phonebook
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending Messages
1. Search for the desired Phonebook entries.
For details on searching through Phonebook entries,
see “Finding a Name and Number” on page 27.
2. Press
or
”, “
to highlight the right side of
” or “ ”, then press
“
or
Press
“
or
”, then press
or to select “Send Message”, then
to highlight the right side of
.
3. Press
press
.
If you highlight the right side of “
” in step 2:
”, “
” or
“
4. Press
or
to select “MMS” or “SMS”, then
press
.
5. Enter your message.
For details on creating a message, see “Creating a
New MMS” on page 98 or “Creating a New SMS”
on page 106.
Phonebook
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Example: To access “Language” Sub Menu using
shortcut keys
Using the Menu
Using the Main Menu
Press
.
1. Press
2. Press
3. Press
during stand-by mode.
Note
or
or
to navigate to required location.
to access function.
• The shortcut keys work for the first three menu levels
only.
To Select Another Item within the Main Menu
To return to the previous screen after selecting a
function from the Main Menu or Sub Menu, press
List of Menu Functions
.
Menu No./
Main Menu
Menu No./
Sub Menu1
Every time you press
one.
, the screen goes back one by
1
2
Camera
1 Image Gallery
Operation Guidance
Your phone uses softkeys to help you to navigate the
phone ( and ). These keys change usage
My Phone
2 Sound Gallery
3 Text Templates
4 Memory Status
depending on the situation. The function of each
softkey at any given time is highlighted at the bottom
left and bottom right of the screen.
1 Games
2 Melody Editor
3 Tone Editor
3
4
Fun & Games
Profiles
1 Normal
2 Meeting
3 Activity
4 Car
Shortcut Keys
When pressing several key combinations during stand-
by mode, you can shortcut to the specified menus.
5 Silent
To access the desired menu directly, press
and digit
keys for the menu’s corresponding number during
stand-by mode. See the following table as reference.
31
Using the Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu No./
Main Menu
Menu No./
Sub Menu1
1 Calculator
2 Calendar
5
Organiser
3 Clock & Alarm
4 Voice Memo
5 Help List
1 Phonebook
2 Call Register
3 Diverts
6
7
Call Manager
Settings
1 Phone Settings
2 Call Settings
3
4
Network Settings
Internet Settings
5 Infrared
6 Security
7 Master Reset
1 Homepage
8
Browser
2 Bookmarks
*
9
0
Info-Service
Messages
1 MMS
2 SMS
3 Cell Broadcast
4 Cell Info
5 Voicemail
* Depends on the contents of SIM card.
Using the Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
32
2. Press
to take the picture.
Camera
(M 1)
The shutter sound occurs and the static image of the
taken picture is displayed.
Your phone incorporates an integrated digital camera.
This allows you to take and send pictures wherever you
are.
3. Press
[Save].
“Save to Gallery” is displayed, then the picture is
registered.
If you want to send the picture by MMS
You can send pictures in several ways:
• Immediately after you take a picture by pressing the
.
• By saving the picture in the Image Gallery (in My
Phone) and sending it later from the Image Gallery
immediately, press
after step 2.
The camera returns to step 1 repeat process as
desired.
using the
[Options].
4. Press
to return to stand-by.
• By saving the picture and selecting “ ”, MMS and
composing the message and adding the image from
Tip
• To leave Camera Mode without registering the taken
picture after step 3 in “Taking Pictures”:
using the
[Options].
These methods are explained in detail in the sections
below.
Press
and select “Yes”, then press
.
• To take a picture of yourself, press
whilst
Taking Pictures
Put the phone into the camera mode to take a picture.
checking the image reflected on the mirror on the
back of the phone. Place/Hold the phone at least 40
cm away from yourself.
You can send the pictures registered in the Image
Gallery with your message.
Using the Zoom Function
1. Press and hold
for approximately 2 seconds
Press
[Zoom] to magnify the photographic
whilst stand-by.
subject.
The phone switches to the camera mode.
The camera view can be seen through the “on
screen” viewer.
Press
[Wide] to restore the original
magnification.
33
Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Retaking Pictures
• When “Select Size” is set to “Large”, you cannot use
After steps 1 and 2 in “Taking Pictures” on page 33,
[Back].
the zoom function.
Further shooting is available.
To select the picture size
Note
1. Press
Pictures” to display the Options Menu.
2. Press or to select “Select Size”, then press
[Options] before step 2 in “Taking
• The Digital Camera Uses a C-MOS Sensor. Although
this camera has been manufactured to the highest
specification, some pictures may still appear too
bright or too dark.
.
3. Select the picture size by pressing
press
or
, then
• If the phone has been left in a warm place for a long
time before taking or registering a picture, the
picture quality may be poor.
.
To select the mode
1. Press [Options] before step 2 in “Taking
Pictures” on page 33 to display the Options Menu.
In the Case of No Available Memory
When the number of pictures that can be taken becomes
5 or less, or when the remaining capacity becomes 27.5
Kbytes (when “Medium” is selected as the picture size)
or less, “ ” will appear on screen. The screen returns
to step 2 in “Taking Pictures” on page 33. The number
of pictures that can be taken is displayed in the upper
left of the screen. (The number of pictures that can be
taken is approximate.)
2. Press
or
to select “Select Mode”, then press
.
3. Select the mode by pressing
or
, then press
.
Note
• Vertical stripes may be reflected to a picture by light
source. Change the mode in this case.
When the number of pictures that can be taken becomes
0, and when you try to take a picture again, “Can not
take a picture. Maximum Capacity” is displayed.
Camera
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Meanings of Indicators in Camera Mode
Viewing the Taken Pictures
Delay timer indicator
The taken pictures can be viewed in the Image Gallery.
1. In camera mode, press
[Options].
: Whilst the timer setting is on.
Picture brightness indicators
The Options Menu is displayed.
2. Select “Existing Images”, then press
The Image Gallery is displayed.
.
: Bright
:
: Normal
:
3. Select the file name you wish to view by pressing
or , then press
.
: Dark
The selected image is displayed.
4. Once you have finished, press
return to the list.
Picture size indicators (p. 34)
[Back] to
Large:
288 × 352 dots
Medium (default): 120 × 160 dots
Small:
Tip
60 × 80 dots
• Your pictures are given file names which show the
time and date when the picture was taken.
Example:
The file name “13-05-02_12-34-56” is displayed for
the picture taken at 12:34:56 of 13th May 2002. The
file names of your pictures can be changed (p. 38).
Mode indicator (p. 34)
: Mode 1
: Mode 2
Making Adjustments According to Lighting
Conditions
Adjusting the Brightness of the Picture
Adjust the brightness of the picture by pressing
.
Using the Timer
or
Taking a Picture with the Timer
Once the phone has returned to the stand-by screen the
brightness settings return to default.
1. In camera mode, press
[Options].
The Options Menu is displayed.
35
Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press
or
or
to select “Delay Timer”, then press
to select “On”, then press
Cancelling the Delay Timer
.
1. Press
[Options] whilst the delay timer setting
is on.
3. Press
.
The Options Menu is displayed.
“
” appears on the screen and the phone returns
to camera mode.
2. Press
or
to select “Delay Timer”, then press
.
4. Press
to take the picture.
Delay timer begins.
3. Press
or
to select “Off”, then press
.
10 seconds after the timer sound occurs, the camera
takes a picture, and sounds a tone.
“
” goes off.
Sending Pictures
See “Sending Messages” on page 38 for instructions.
Note
• Whilst the delay timer is operating, the LED
indicator and the icon flash.
• If
is pressed whilst the delay timer is operating,
Deleting Pictures
See “Deleting Images” on page 39 for instructions.
the picture is taken instantly.
• If there is an incoming call or alarm functioning,
or
is pressed, whilst the delay timer is
operating, the camera operation is cancelled. In this
case, the timer setting is cancelled.
• The zooming function with
[Zoom] / [Wide], or
the adjustment of brightness of the picture with
, is unavailable whilst the delay timer is
operating.
or
Camera
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Images
My Phone
My Phone contains several types of image and sound
data can be controlled collectively. Also included in My
Phone are frequently used text message phrases.
1. Press
to display the Main Menu.
or to select “My Phone”, then press
2. Press
.
3. Select “Image Gallery”, then press
.
Image Gallery (M 2-1)
The Image Gallery is displayed.
Pictures that are taken by a digital camera or images
that are downloaded from mobile Internet sites can be
managed.
4. Select the file name you wish to view by pressing
or , then press
.
The selected image is displayed.
:
This is the folder where the images registered in
the Phonebook are saved.
5. Once you have confirmed the image, press
[Back] to return to the Image Gallery.
:
:
:
:
:
:
:
Images in PNG format
Checking the Image Data
Pictures/Images in JPEG format
Animation in NEVA file (e-Animation file)
Images in GIF format
Select the desired data in step 4 in “Viewing Images”,
then select “File Information” after pressing
[Options] to display the Options Menu.
Images in BMP format
The file type and size of the selected image are
displayed. Whether the image can be copied,
forwarded, or saved is also displayed.
Images in WBMP format
Images in WPNG format
To return to the Image Gallery, press
twice.
[Back]
The date and time when the photo was taken is
displayed as a file name for the image.
37
My Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the File Name
2. Select the file name you wish to adjust by pressing
or , then press [Options].
The Options Menu is displayed.
3. Press or to select “Adjust Size”, then press
1. Perform steps 1 to 3 in “Viewing Images” on
page 37.
2. Select the file name you wish to change by pressing
or
, then press
[Options].
.
The Options Menu is displayed.
3. Select “Rename”, then press
4. Enter a new file name.
4. Select the image size you wish to change by
pressing or , then press
5. To determine what part of the image is chosen to be
displayed, select it by pressing or
then press
6. Press
.
.
,
,
,
To correct the last character, press
briefly.
[Clear]
.
Press and hold
5. Press
Note
[Clear] to clear all characters.
.
.
To cancel registration, press
time before step 6.
[Back] at any
• Following characters cannot be used for a file name:
/, \, :, *, ?, ", <, > and . (period).
Note
• “Adjust Size” may not be available depending on the
image original and copyright issued.
Adjusting the Size of the Image
The images that are registered in the Image Gallery can
be adjusted for use as a wallpaper during stand-by or as
an incoming call display.
Sending Messages
1. Perform steps 1 to 3 in “Viewing Images” on
page 37.
When the image size is modified, the data size is
updated.
2. Select the file name you wish to send by pressing
or
, then press
[Options].
1. Perform steps 1 to 3 in “Viewing Images” on
The Options Menu is displayed.
page 37.
My Phone
38
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press
or
.
to select “Send Message”, then
Sound Gallery (M 2-2)
press
recorded by Voice Memo are stored and managed from
the Sound Gallery. Default ring tones are stored else
where and are not available in Sound Gallery.
4. Enter your message.
For details on creating a message, see “Creating a
New MMS” on page 98.
:
:
Sound file in SMAF format
Note
Original ringing tone (composed in Melody
Editor)
• Images with a red icon cannot be sent attached to a
message.
:
:
:
Sound file in Standard MIDI format
Sound file in i Melody format
Sound file in WAVE format
Deleting Images
1. Perform steps 1 to 3 in “Viewing Images” on
page 37.
Note
2. Select the file name you wish to delete by pressing
• SMAF (Synthetic music Mobile Application Format)
is a format of music data for mobile phones.
or
, then press
[Options].
The Options Menu is displayed.
Playing Back Sounds
3. Press
or
to select “Delete”, then press
.
1. Press
2. Press
to display the Main Menu.
or to select “My Phone”, then press
4. Select “Yes”, then press
.
The selected image is deleted.
To cancel deletion, select “No” at step 4, then press
.
.
3. Select “Sound Gallery”, then press
.
The Sound Gallery is displayed.
4. Select the sound you wish to play back by pressing
or , then press
The selected sound is played.
.
To stop playing, press
[Stop].
39
My Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the Sound Data
Tip
Sounds” on page 39, then select “File Information”
• When “Data Edit” is displayed in the menu in step 2,
you are able to edit the sound (p. 50). Once you have
old file. This new file then becomes the original ring
tone.
after pressing
[Options].
The file type and size of the selected sound are
displayed. Whether the sound can be copied, forwarded
or saved is also displayed.
Setting the Tone and Strength
To return to the Sound Gallery, press
[Back].
1. Perform steps 1 to 3 in “Playing Back Sounds” on
page 39.
Changing the File Name
2. Select the file name you wish to edit by pressing
1. Perform steps 1 to 3 in “Playing Back Sounds” on
or
, then press
[Options].
page 39.
The Options Menu is displayed.
2. Select the file name you wish to change by pressing
3. Press
or
to select “Tone Set” or “Strength
or
, then press
[Options].
Set”, then press
.
The Options Menu is displayed.
3. Select “Rename”, then press
4. Enter a new file name.
For full details, see pages 48 to 50.
.
Note
• If “Tone Set” and “Strength Set” are not displayed
in the menu in step 2, you cannot change the settings.
To delete the last character, press
briefly.
[Clear]
Press and hold
5. Press
Note
[Clear] to clear all characters.
.
• Following characters cannot be used for a file name:
/, \, :, *, ?, ", <, > and . (period).
My Phone
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending Messages
Deleting Sounds
1. Perform steps 1 to 3 in “Playing Back Sounds” on
page 39.
page 39.
2. Select the file name you wish to send by pressing
2. Select the file name you wish to delete by pressing
or
The Options Menu is displayed.
3. Press or to select “Send Message”, then
press
If you select your original ringing tone in step 2;
4. Press or to select the file format “SMAF”,
, then press
[Options].
or
, then press
[Options].
The Options Menu is displayed.
3. Press
or
to select “Delete”, then press
.
.
4. Select “Yes”, then press
.
The selected sound has been deleted.
To cancel deletion, select “No” at step 4, then press
.
“MIDI” or “i Melody”, then press
.
5. Enter your message.
For details on creating a message, see “Creating a
New MMS” on page 98.
Note
• Sounds with a red icon cannot be sent attached to a
message.
• Only the first part of the data will be converted if you
select “i Melody” in step 4.
41
My Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press
or
.
Text Templates (M 2-3)
You can register up to 20 text templates for use in
MMS, SMS and entering names in the phone book.
4. Enter new text.
To correct the last character, press
briefly.
Press and hold
[Clear]
You can input messages or others more easily by
registering frequently used text.
[Clear] to clear all characters.
128 characters may be registered in any text template.
5. Press
.
Adding Phrases to the Text Templates
Viewing Text Templates
1. Press
to display the Main Menu.
1. Perform steps 1 to 3 in “Adding Phrases to the Text
2. Press
or
to select “My Phone”, then press
Templates”.
.
2. Select the number you wish to view by pressing
or
, then press
.
3. Press
or
to select “Text Templates”, then
press
.
3. Press
or to select “Confirm”, then press
.
The list of Text Templates is displayed.
The selected text template is displayed.
4. Select the number you wish to register by pressing
4. After confirmation, press
[Back] to return to
or
, then press
template list.
5. Enter the text, then press
.
Deleting Text Templates
For details on entering characters, see “Entering
Characters” on page 23.
1. Perform steps 1 to 3 in “Adding Phrases to the Text
Templates”.
Editing Text Templates
2. Select the text template you wish to delete by
1. Perform steps 1 to 3 in “Adding Phrases to the Text
pressing
or
, then press
.
Templates”.
3. Press
or
to select “Delete”, then press
.
2. Select the number you wish to edit by pressing
or
, then press
.
My Phone
42
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select “Yes”, then press
.
Memory Status (M 2-4)
This function helps you to check the memory status of
the Galleries.
The selected text template is deleted.
To cancel deletion, select “No” at step 4, then press
.
1. Press
to display the Main Menu.
2. Press
or
to select “My Phone”, then press
to select “Memory Status”, then
.
3. Press
or
press
.
43
My Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
Game Guide
Fun & Games
1. Perform steps 1 to 4 in “Starting Games”.
Games (M 3-1)
2. Press
or
to select “Guide”, then press
.
Your phone comes complete with 3 games (PK Game,
Collection Hunter, Air Hockey).
Game instructions are displayed.
Collection Hunter (M 3-1-2)
Check of a collection and reset of a game can be
performed in “Collection Hunter”.
Starting Games
1. Press
to display the Main Menu.
or to select “Fun & Games”, then press
2. Press
To Check Collection
.
1. Perform steps 1 to 3 in “Starting Games”.
3. Select “Games”, then press
.
2. Press
then press
3. Press
then press
or
to select “Collection Hunter”,
The game list is displayed.
.
4. Press
or
to select the desired game, then
or
to select “Collection View”,
press
.
.
5. Select “New Game”, then press
.
To Reset the Game
6. When you have finished playing, press
.
1. Perform steps 1 to 3 in “Starting Games”.
Note
2. Press
or
to select “Collection Hunter”,
• If an incoming call is detected during gameplay, the
game will be stopped.
then press
.
3. Press
or
or
to “Reset Game”, then press
to select “Yes”, then press
.
4. Press
.
Fun & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Air Hockey (M 3-1-3)
Note
The level of the game can be chosen for “Air Hockey”.
. Press
again to return the volume.
To Select a Game Level
1. Perform steps 1 to 3 in “Starting Games” on
Melody Editor (M 3-2)
page 44.
You can create an original ringing tone by yourself, or
you can send a melody attached to an MMS.
2. Press
or
to select “Air Hockey”, then press
.
You can input up to 190 tones × 16 chords, or 380 tones
× 8 chords per melody.
3. Press
or
or
to select “Level”, then press
to select the level, then press
.
The original ringing tone is registered in the Sound
Gallery.
4. Press
.
Setting up Game Options (M 3-1-4)
Creating Your Original Ringing Tone (M 3-2-1)
1. Perform steps 1 to 3 in “Starting Games” on
1. Press
to display the Main Menu.
page 44.
2. Press
or
to select “Fun & Games”,
2. Press
or
.
to select “Game Settings”, then
then press
3. Press
then press
.
press
or
to select “Melody Editor”,
3. Press
or
or
or
to select “Backlight” or “Enable
.
Vibrate” to change the settings, then press
.
4. Select “Create New”, then press
5. Enter the title.
.
4. Press
to select “On” or “Off”, then press
.
Up to 24 characters can be entered.
For details on entering characters, see “Entering
Characters” on page 23.
5. Press
to select “Sound Volume” to adjust
the sound volume, then press
6. Press to increase the sound volume or press
to decrease the sound volume and then press
.
6. Press
.
.
45
Fun & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Press
or
to select a tempo, then press
.
12.Repeat steps 9 to 11 to input notes.
When you press
during input, the melody that
The music tempo is described below.
• “Allegro (Fast)”:
150
125
107
94
When you press
[Options] and select “Play
• “Moderato (Normal)”:
• “Andante (Slow)”:
• “Adagio (Very Slow)”:
before Cursor” whilst entering notes, the melody,
that is displayed on the screen, is played back up to
the cursor position.
When you press
Chord”, you can select another chord. Repeat steps
9 to 11 to input notes for the new chord.
[Options] and select “Select
Tempo is defined by the number of crotchets (
played per minute.
)
8. Select “8 Chords” or “16 Chords” by pressing
13.When you finish inputting, press
[Options] to
or
, then press
.
display the Options Menu.
9. Specify the musical scale and rest using the digit
14.Select “Save”, then press
.
keys.
15.Press
or
.
to select “Save to Gallery”, then
For details on specifying the sound level and rest,
see “Specify the Musical Scale and Rest” on
page 47.
press
Your original ringing tone is registered in the Sound
Gallery.
10.Specify the types of musical notes or rest using
or
keys.
Note
For details on specifying the musical notes and rest,
“Specifying the Types of Notes and Rests” on
page 47.
• If the capacity or the memory in the Sound Gallery
becomes insufficient, the message of “Maximum
Capacity : 80 Not registered” or “Not registered.
Memory Full” is displayed respectively. At that time,
the display returns to the screen of step 15. Try again
after deleting unnecessary data (p. 41).
11.Press
key after inputting one note.
Input the next note after the cursor moves to the
right.
Fun & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
46
Specify the Musical Scale and Rest
Using the key shown below, specify the musical scale
and rest.
Specifying the Types of Notes and Rests
Specify notes and rests by pressing
repeatedly.
or
Do
Re
Mi
Fa
Sol
La
Ti Rest
(
(
)
)
Crotchet (Crotchet rest)
Quaver (Quaver rest)
When you press the key shown above once, a crotchet
is specified in the middle scale (no mark).
When you press the same key repeatedly, the note will
shift cycle through the available octave ranges.
(
(
(
)
)
)
Semiquaver (Semiquaver rest)
Semibreve (Semibreve rest)
Minim (Minim rest)
When you press
or
whilst a note is selected, the
note will raise one semitone higher or lower.
When you make a dotted note or triplet, press
after selecting the target note.
When entering rest: Crotchet rest is entered.
47
Fun & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Set the Tone
• You cannot make a dotted semiquaver (semiquaver
rest) or a dotted semibreve (semibreve rest).
• Three continuous notes are required for triplet.
The phone can play notes using different instruments.
1. Perform steps 1 to 13 in “Creating Your Original
Ringing Tone” on page 45.
To specify a tie, press
notes.
after selecting the target
2. Press
or
to select “Tone Set”, then press
.
An underscore (_) is displayed next to the note, and the
note is tied with the next one.
3. Select a category of the tone by pressing
or
.
.
4. Select a tone by pressing or , then press
To enter the next note, press
and move the cursor to
When “Play Current Chord” is selected, the melody
entered is played back in the selected tone.
When “Confirm Tones” is selected, the syllable
names are played back in the selected tone.
the right. Then, repeat the operation on the previous
page.
If the cursor is positioned next to a note, you can repeat
the note immediately left of the cursor when
is pressed.
or
5. Select “OK”, then press
.
Now you can create a melody.
You can select from the following 128 tones
Category
Pianos
Tone
Piano
Category
Chimes
Tone
Celesta
Glockenspiel
Music Box
Vibraphone
Marimba
Xylophone
Tubular Bells
Dulcimer
Bright Piano
E. Grand Piano
Honky-Tonk
Electric Piano 1
Electric Piano 2
Harpsichord
Clavi
Fun & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Category
Organs
Tone
Category
Guitars
Tone
Category
Reeds
Tone
Category
Tone
Piccolo
Flute
Recorder
Pan Flute
Blown Bottle
Shakuhachi
Whistle
Drawbar Organ
Perc. Organ
Rock Organ
Church Organ
Reed Organ
Accordion
Nylon Guitar
Steel Guitar
Jazz Guitar
Clean Guitar
Muted Guitar
Overdriven Gtr.
Distortion Gtr.
Gtr. Harmonics
Soprano Sax
Alto Sax
Tenor Sax
Baritone Sax
Oboe
English Horn
Bassoon
Clarinet
Flutes/
Pipes
Harmonica
Tango Accordion
Ocarina
Acoustic Bass
Finger Bass
Pick Bass
Fretless Bass
Slap Bass 1
Slap Bass 2
Synth Bass 1
Synth Bass 2
Violin
Viola
Cello
Contrabass
Tremolo Strings
Pizz. Strings
Harp
Square Lead
Sawtooth Lead
Calliope Lead
Chiff Lead
Charang Lead Pads
Voice Lead
New Age Pad
Warm Pad
Polysynth Pad
Choir Pad
Bowed Pad
Metallic Pad
Halo Pad
Synth
Leads
Synth
Basses
Strings 1
Fifth Lead
Bass & Lead
Timpani
Sweep Pad
Str. Ensemble 1
Str. Ensemble 2
Synth Strings 1
Synth Strings 2
Choir Aahs
Voice Oohs
Synth Voice
Orchestra Hit
Trumpet
Trombone
Tuba
Muted Trumpet
French Horn
Brass Section
Synth Brass 1
Synth Brass 2
Rain
Soundtrack
Crystal
Atmosphere
Brightness
Goblins
Sitar
Banjo
Shamisen
Koto
Kalimba
Bagpipe
Fiddle
Synth
Effects
Strings 2
Brasses
Ethnics
Echoes
Science Fiction
Shanai
49
Fun & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Strength of the Original Ringing Tone
levels for each melody.
Category
Tone
Category
Effects
Tone
Tinkle Bell
Agogo
Gtr. Fret Noise
Breath Noise
Seashore
Bird Tweet
Telephone Ring
Helicopter
Steel Drums
Woodblock
Taiko Drums
Melodic Tom
Synth Drum
Reverse Cymbal
When you purchase this phone, the strength of the
original ringing tone is set to “forte (Loud)”.
Percus-
sions
1. Perform steps 1 to 13 in “Creating Your Original
Applause
Gunshot
Ringing Tone” on page 45.
2. Press
or
to select “Strength Set”, then press
Original 1 (Piano)*
.
Original 2 (Glockenspiel)*
Original 3 (Reed Organ)*
Original 4 (Nylon Guitar)*
Original 5 (Violin)*
Original
3. Select a strength of the tone by pressing
then press
or
,
.
When “Play Current Chord” is selected, the original
ringing tone entered is played back in the selected
strength of the tone.
* The default setting tone.
To create your original tone, see “Creating Your Original
Tone” on page 54.
4. Select “OK”, then press
.
Now you can create an original ringing tone.
Deleting an Original Ringing Tone
Perform steps 1 to 4 in“Deleting Sounds” on page 41.
Editing Original Ringing Tones
1. Perform steps 1 to 3 in “Creating Your Original
Ringing Tone” on page 45.
2. Press
or
to select “Existing Melodies”, then
press
.
Fun & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
50
3. Press
or
to select an original ringing tone
12.Press
or
to select “Over Write”, then press
you wish to edit, then press
[Options].
.
The Options Menu is displayed.
The original ringing tone is changed.
If you select “New”, the melody before the
correction is not modified. The original ringing tone
is registered as a new original ringing tone.
4. Press
or
to select “Data Edit”, then press
.
5. Edit the title and press
.
Note
6. Press
or
to select a tempo, then press
.
• When the number of chords is modified in step 7, the
confirmation screen may be displayed. When you
select “Yes”, a section of the melody may be deleted.
• When you are going to add notes in step 8, you cannot
add any notes if you have already entered 380 notes
(for 8 chords melodies) or 190 notes (for 16 chords
melodies).
7. Press
or
.
to select the number of chords, then
press
8. Select a note you wish to change by pressing
or
, then edit notes.
For details on editing tones, see “Tone Editor” on
page 52.
When you add notes, enter the note correctly on the
cursor.
To delete a note, press
Tip
• To delete the continuous melody, press
[Options] and then press
after selecting “DEL
[Clear] briefly.
after Cursor” or “DEL before Cursor.” You can
delete the melody after the cursor or before the
Cursor.
Press and hold
[Clear] to clear all tones.
9. When you finish editing, press
[Options] to
display the Options Menu.
10.Select “Save”, then press
.
11.Select “Save to Gallery”, then press
.
51
Fun & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying and Pasting Notes
You can copy and move a part of a melody to another
position.
You can make a tone and use it for the original ringing
tone.
Only original ringing tones or editable melodies can be
copied or moved.
Up to five types of tones can be registered respectively
for 8 chords and 16 chords.
1. Perform steps 1 to 7 in “Editing Original Ringing
FM Sound Source
Tones” on page 50.
Various types of tones can be composed by combining
the functions that generate one sine wave called an
“Operator”. The combination of the operator is called
an algorithm.
2. Press
[Options] to display the Options Menu.
3. Press
or to select “Copy” or “Cut”, then
press
.
The operator acts as the modulator (modulating part) or
the carrier (modulated part) depending on the
algorithm.
4. Move the cursor to the first note to be copied or to
be cut and press
5. Move the cursor to the last note to highlight the area
and press
.
.
The highlighted area will be saved temporarily in
the memory.
6. Press
7. Press
8. Move the cursor to the point you wish to paste the
notes, then press
Saved notes are pasted.
[Options] to display the Options Menu.
or to select “Paste”, then press
.
• In each operator, various parameters such as multiple
or envelope can be set.
• By setting the feedback to the specified operator,
wider tone ranges can be created.
.
Fun & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
52
Setting an Algorithm
Setting the Operator
Set the combination of the operator.
The meaning and content of the parameter that can be
set to the operator is described below.
Select from 4 types of combinations in 8 chords, and 2
types in 16 chords.
Parameter
Meaning
When the value of the carrier is large, the
sound becomes high. You can set various
types of notes by changing the values of the
modulator.
8 Chords
Multiple
(13 levels)
Algorithm6
Algorithm3
Algorithm5
Algorithm4
Envelope
(Continu-
ous/Decay)
This sets continuous same note or fade-out.
16 Chords
This sets a note to be sustained after com-
pleting the note. If you want to have a note
with reverberation, set this function on.
Sustain
(On/Off)
Key Scale
Rate
(2 levels)
Algorithm1
Algorithm2
Set the function to “2” if you want to a short
note.
Key Scale
Level
(4 levels)
(Green number): The modulator (modulating part)
(White number): The carrier (modulated part)
This function sets the rate of reducing the
volume as a note becomes higher.
In the carrier, the volume becomes large as
this level becomes higher.
Total Level
(64 levels)
In the modulator, the melody becomes
brighter as this level becomes higher. The
melody becomes softer as this level
becomes smaller.
Attack Rate This sets the time from the beginning of the
(15 levels) sound to the maximum volume.
53
Fun & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
Set the Effect Frequency
Parameter
Meaning
Define the frequency of the vibrato or tremolo.
Decay Rate This sets the time from the maximum volume
(16 levels)
to the volume of the sustain level.
The frequency becomes faster as the figure increases.
In sustaining note, this displays the volume
of the sound that continues to produce. In
fading-out note, this displays the volume
when the note starts fading-out.
Sustain
Level
(16 levels)
Creating Your Original Tone
1. Press
to display the Main Menu.
2. Press
or
to select “Fun & Games”, then
In sustaining note, this displays the sustain-
ing time from note completion to no sound.
In fading-out note, this displays the time from
starting fade-out to no sound.
Release
Rate
(16 levels)
press
.
3. Press
or
to select “Tone Editor”, then press
.
Select the basic wave type from eight types.
4. Select “For 8 Chords” or “For 16 Chords” by
pressing or , then press
Type 1
Type 5
Type 2
Type 6
Type 3
Type 7
Type 4
Type 8
Wave
Shape
(8 types)
.
5. Select the number you wish to register and press
.
6. Press
or
to select “Rename”, then press
.
Vibrato
(4 levels/
Off)
Set the vibrato. If the vibrato is used, select
from 4 levels.
7. Enter the title.
Up to 16 characters can be entered.
For details on entering characters, see “Entering
Characters” on page 23.
Tremolo
(4 levels/
Off)
Set the tremolo. If the tremolo is used, select
from 4 levels.
8. Press
.
Feedback
(8 levels)
Set the level of modulation in the modulator
feedback for Operator 1.
9. Press
or
to select “Base Tone Set”, then
or
press
.
10.Select a category of the tone by pressing
.
Fun & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
54
11.Select a base tone by pressing
or
, then press
18.Press
parameter.
For details of parameter, see pages 53 to 54.
When you press , the syllable names are played
or
to change the content of the
.
When “Confirm Tones” is selected, the syllable
names are played back in the selected tone.
back in the selected content of the parameter.
Repeat steps 17 and 18 to change another content of
the parameter.
12.Select “OK”, then press
.
13.Press
or
to select “Details Editor”, then
press
.
19.Press
or
to select “Setup End”, then press
14.Press
or
to select “Algorithm x”, then press
.
.
If you do not wish to change the effect frequency,
skip to step 22.
15.Select an algorithm you wish to set by pressing
or , then press
.
20.Press
or
to select “Effect Frequency”, then
If you do not wish to change the operator, skip to
step 20.
press
.
21.Select the effect frequency you wish to set by
pressing or , then press
22.Press to select “Details End”, then press
16.Select an operator you wish to change by pressing
.
or
, then press
.
or
The basic note parameter is set in advance.
.
17.Select a parameter you wish to change by pressing
23.Press
or
to select “Save”, then press
.
or
.
Your original tone is registered.
55
Fun & Games
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
(M 4)
Profiles
• When a profile is set, the icon which corresponds to
the profile name appears in the stand-by screen:
You can easily alter the phone tone (e.g. the ringer
volume, keypad tones, etc.) according to your
environment.
Normal:
Is the default setup. (not displayed
in the stand-by screen)
For use when discretion is needed.
For use in busy environments.
For use in the car. (connected to a
handsfree kit)
Tone sound and vibration set can be customized for
each profile.
Meeting:
Activity:
Car:
There are 5 profiles including one user definable
profile:
Silent:
For use when silence is needed.
All sounds are muted and you are
alerted to calls with the vibrator.
• Normal
• Meeting
• Activity
• Car
Tip
• You can also activate a profile by pressing and
holding
• Silent
for approximately 2 seconds instead of
steps 1and 2.
Activating a Profile
1. Press
to display the Main Menu.
Customising Profiles
1. Perform steps 1 and 2 in “Activating a Profile”.
2. Select the profile you wish to customise by pressing
2. Press
or to select “Profiles”, then press
.
.
3. Select the profile you wish to activate by pressing
or , then press
4. Press or to select “Activate”, then press
The profile will now be activated.
.
or
3. Press
4. Select the setting you wish to customise by pressing
or , then press
, then press
.
or to select “Edit”, then press
.
.
Profiles
56
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Change the setting you want.
Ringer Volume
For details about settings, see pages 57 to 61.
When it is set to “Silent”, the volume of games is
muted.
Resetting Profile Settings
1. Perform steps 1 and 2 in “Activating a Profile” on
1. Perform steps 1 to 3 in “Customising Profiles” on
page 56.
page 56.
2. Select the profile you wish to reset by pressing
2. Press
or
.
to select “Ringer Volume”, then
or
, then press
.
press
3. Press
or
or
to select “Edit”, then press
.
The current volume level is displayed.
4. Press
to select “Set to Default”, then
3. Press
to increase the ringer volume or press
press
.
to decrease the ringer volume and then press
.
To select “Step Tone”, press
To select “Silent”, press
at level 5.
at level 1.
5. Enter your handset code, then press
6. Press or to select “Yes”, then press
To cancel the resetting, select “No”, then press
Note
.
.
.
Ringer Type
You can select the ringing tone from 30 tones including
5 patterns, 15 sound effects and 10 melodies. You can
also select a sound in the Sound Gallery as the default
ringing tone excluding the WAVE format.
• If you enter a wrong handset code in step 5, the
screen returns to step 4.
1. Perform steps 1 to 3 in “Customising Profiles” on
page 56.
2. Press
or
to select “Assign Melody”, then
press
.
57
Profiles
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press
“Sound Gallery”, followed by
4. Select the ringing tone you wish to use by pressing
or
If you wish to hear the demo, press
To stop playing, press [Stop].
or
to select “Preset Melody” or
Tip
• When “Link to Sound” is selected in step 3, melodies
are synchronised with the vibrator for the ringing
on data.
• When you select “Enable” or “Link to Sound” in step
3, “ ” appears on the stand-by screen.
.
.
[Play].
5. When selection is complete, press
.
Keypad Tones
When the keypad tone is set to on, you will hear a
confirmation tone each time you press a numerical key.
Vibration
When the vibrator option is set to on, the phone will
vibrate for incoming calls regardless of the ringer
volume and tone settings.
1. Perform steps 1 to 3 in “Customising Profiles” on
page 56.
1. Perform steps 1 to 3 in “Customising Profiles” on
2. Press
or
.
to select “Keypad Tones”, then
to select “On” or “Off”, then press
page 56.
press
2. Press
or
to select “Vibration”, then press
3. Press
or
.
.
3. Press
or
to select “Enable”, “Disable” or
If you select “Off”, the screen returns to step 1.
4. Set “Volume”, then press
“Link to Sound”, then press
.
.
5. Press
to increase the volume or press
to
decrease the volume, then press
.
6. Press
or
to select “Melody”, then press
.
.
7. Press
or
to select either “Preset Melody”,
“Sound Gallery” or “Default Tone”, then press
Profiles
58
Download from Www.Somanuals.com. All Manuals Search And Download.
When you select “Preset Melody” or “Sound Gallery”
in step 7:
6. Press
or
or
to select “Melody”, then press
.
7. Press
8. Select the keypad tone.
“Sound Gallery”, then press
.
For details on selecting a ringing tone, see “Ringer
Type” on page 57.
8. Select the warning tone.
For details on selecting a ringing tone, see “Ringer
Type” on page 57.
9. Press
or
to select “Duration”, then press
.
9. Press
or
to select “Duration”, then press
10.Set the duration by pressing
or
, then press
.
.
10.Select the duration by pressing
press
or
, then
.
Warning Tone
This function enables your phone to emit the warning
tone when an error occurs.
Power On/Off Sound
You can set up to emit a sound and select the melody,
volume and duration when the phone is turned on or off.
1. Perform steps 1 to 3 in “Customising Profiles” on
page 56.
1. Perform steps 1 to 3 in “Customising Profiles” on
2. Press
or
.
to select “Warning Tone”, then
to select “On” or “Off”, then press
page 56.
press
2. Press
or
to select “Power On Sound” or
3. Press
or
“Power Off Sound”, then press
.
.
If you select “Off”, the screen returns to step 1.
4. Select “Volume”, then press
5. Press to increase the volume or press
decrease the volume, then press
.
to
.
59
Profiles
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press
or
to select “On” or “Off”, then press
3. Press
“WAP”, then press
4. Select “Volume”, then press
5. Press to increase the volume or press
decrease the volume and then press
or
to select “MMS”, “SMS” or
.
.
If you select “Off”, the screen returns to step 1.
4. Select “Volume”, then press
5. Press to increase the volume or press
decrease the volume and then press
.
.
to
to
.
.
6. Press
or
to select “Melody”, then press
.
6. Press
or
to select “Melody”, then press
.
7. Press
or
to select “Preset Melody” or
7. Press
or
to select “Preset Melody” or
“Sound Gallery”, then press
.
“Sound Gallery”, then press
.
8. Select the ringing tone.
8. Select the alarm tone.
For details on selecting a ringing tone, see “Ringer
Type” on page 57.
For details on selecting a ringing tone, see “Ringer
Type” on page 57.
9. Press
or
to select “Vibration”, then press
9. Press
or
to select “Duration”, then press
.
.
10.Press
or
to select “Enable”, “Disable” or
10.Enter the duration of alarm tone in 2 digits (01 to 10
“Link to Sound”, then press
.
seconds) using the digit keys, then press
.
11.Press
or
to select “Duration”, then press
.
Message Alert
12.Enter the duration of ring tone in 2 digits (01 to 99
seconds) using the digit keys, then press
When receiving messages, special ring tones can be set.
.
1. Perform steps 1 to 3 in “Customising Profiles” on
page 56.
2. Press
or
to select “Message Alert”, then
press
.
Profiles
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Low Battery Alert
Adjust the volume of the alarm when the battery
becomes low.
1. Perform steps 1 to 3 in “Customising Profiles” on
page 56.
2. Press
or
to select “Low Battery Alert”, then
press
.
3. Press
to increase the volume or press to
decrease the volume and then press
.
Any Key Answer
1. Perform steps 1 to 3 in “Customising Profiles” on
page 56
2. Select “Any Key Answer”, then press
.
3. Select “On” or “Off” by pressing
or
, then
press
.
61
Profiles
Download from Www.Somanuals.com. All Manuals Search And Download.
6. If you wish to start a new calculation, press
Organiser
[C].
Calculator (M 5-1-1)
When calculation is complete, press
.
The calculator function performs the 4 arithmetic
calculations using up to 12 digits.
Rate Conversion
You can also use the calculator as a currency calculator
to convert from/to a home currency using a conversion
rate that you enter.
1. Press
to display the Main Menu.
or to select “Organiser”, then press
2. Press
.
To Set a Currency Conversion Rate (M 5-1-2)
3. Select “Calculator”, then press
.
.
1. Perform steps 1 to 3 in “Calculator”.
4. Select “Calculator”, then press
2. Press
or
to select “Exchange Rate”, then
The calculator appears on the display.
press
.
5. Key operations for calculation are as follows.
3. Press
or
to select “Foreign Domestic” or
“Domestic Foreign”, then press
.
To delete all digits, press [Clear].
4. Enter the currency conversion rate, then press
.
To Convert a Value
1. Perform steps 1 to 4 in “Calculator”.
2. Enter the value to be converted, then press
.
To enter a decimal point, press
.
To clear the entered number or operand, press
[C].
To do the calculations, press
.
Organiser
62
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press
or
to select “In Domestic” or “In
5. Press
or
and select the note number, then
Foreign”, then press
.
press
.
The result is displayed.
If you select “Exchange Rate” in step 3, you can set
a currency conversion rate.
6. Enter the schedule content, press
.
Up to 3 schedule items can be stored.
For details on entering characters, see “Entering
Characters” on page 23.
4. When calculation is complete, press
.
If you wish to add another item, repeat steps 5 and 6.
Note
7. When you have finished entering, press
• You cannot perform step 2 when a sign of the four
fundamental processes of arithmetic is displayed.
[Back].
The screen returns to the calendar. Dates with
scheduled tasks/meetings are underlined.
Calendar (M 5-2)
The Calendar function helps you organise and manage
your busy schedule. You can view the stored schedule
on a monthly basis.
Note
• The calendar can be displayed for dates from
January 2000 through to December 2099.
1. Press
to display the Main Menu.
Find a Particular Date
You can move the view to a specified date in the
calendar.
2. Press
or
to select “Organiser”, then press
.
3. Press
or
to select “Calendar”, then press
1. Press
2. Select “Go to Date”, then press
3. Enter the date of the calendar to be displayed, then
press
The specified date is displayed.
[Options] to display the Option Menu.
.
.
The current month will be displayed and current
date will be highlighted.
.
4. Select the day for the schedule by pressing
or , then press
,
,
.
63
Organiser
Download from Www.Somanuals.com. All Manuals Search And Download.
Deleting Schedules
5. Select “Yes”, then press
.
To cancel deleting, select “No” at step 5, then press
.
To Delete Schedule Items
1. Perform steps 1 to 3 in “Calendar” on page 63.
To Delete All Scheduled Entries
2. Select the day by pressing
press
3. Select the item you wish to delete by pressing
, then press [Options].
The Options Menu is displayed.
,
,
or
, then
1. Perform steps 1 to 3 in “Calendar” on page 63.
.
2. Press
[Options] to display the Options Menu.
or
3. Press
or to select “Delete” to delete all
scheduled entries, then press
.
4. Press
or
to select “Delete”, then press
.
4. Press
or
to select “All Data” to delete all
scheduled entries, then press
.
5. Select “1 Data”, then press
6. Select “Yes”, then press
.
5. Select “Yes”, then press
.
.
To cancel deleting, select “No” at step 3, then press
.
To cancel deleting, select “No” at step 6, then press
.
To Delete All Scheduled Tasks/Meetings for a
Specific Day
Clock & Alarm
You need to set the correct time and date in order for
your phone’s various time-based functions to work
correctly.
1. Perform steps 1 to 3 in “Calendar” on page 63.
2. Select the day you wish to delete by pressing
or , then press [Options].
The Options Menu is displayed.
3. Press or to select “Delete”, then press
4. Select “1 Day” to delete all contents for a day, then
press
,
,
Setting the Date and Time (M 5-3-4)
1. Press
to display the Main Menu.
or to select “Organiser”, then press
.
2. Press
.
.
Organiser
64
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press
or
.
to select “Clock & Alarm”, then
to select “Set Date/Time”, then
1. Perform steps 1 to 3 in “Setting the Date and Time”
on page 64.
press
2. Press
or
.
to select “Clock Settings”, then
to select “Date Format”, then press
to select “D-M-Y”, “M-D-Y” or
4. Press
or
.
press
press
3. Press
or
5. Enter the day, month, year and time using the digit
keys, then press
When you enter the time in a 12-hour clock format,
press and change am/pm.
.
.
4. Press
or
“Y-M-D”, then press
.
The order in which the date and time appears is
based on the format setting. See “To Select the Date
Format”.
To Set the Clock Display
1. Perform steps 1 to 3 in “Setting the Date and Time”
on page 64.
To Select the Time System
2. Press
or
.
to select “Clock Settings”, then
to select “Display Format”, then
to select “Time Only”, “Date Only”
1. Perform steps 1 to 3 in “Setting the Date and Time”
press
on page 64.
3. Press
or
.
2. Press
or
to select “Clock Settings”, then
press
press
.
4. Press
or
3. Select “Time Format”, then press
4. Press or to select “12 hour” or “24 hour”,
then press
.
or “Date & Time”, then press
.
To set hide clock, select “Off” at step 4, then press
.
.
To Select the Date Format
The date format can be switched between “Day-Month-
Year”, “Month-Day-Year” or “Year-Month-Day”.
When “Wallpaper” is set to “On”, the date is not
displayed in the main screen.
65
Organiser
Download from Www.Somanuals.com. All Manuals Search And Download.
To Set Daylight Saving Time
3. Press
or
to select “Set Custom Zone”, then
You can switch to daylight saving time without having
to change the clock time itself.
press
.
4. Enter the time using the digit keys, then press
Each press of switches - and +.
Setting Alarm (M 5-3-1)
Alarm function allows you to be alerted at a specified
time.
.
1. Perform steps 1 to 3 in “Setting the Date and Time”
on page 64.
2. Press
or
.
to select “Clock Settings”, then
to select “Daylight Saving”, then
press
3. Press
or
Note that the alarm may not function correctly if the
clock has not been set.
press
.
1. Press
to display the Main Menu.
4. Press
or
to select “On”, then press
.
2. Press
or
to select “Organiser”, then press
Setting the Time Zone (M 5-3-3)
.
1. Perform steps 1 to 3 in “Setting the Date and Time”
3. Press
or
.
to select “Clock & Alarm”, then
on page 64.
press
2. Press
then press
3. Select “Change Zone”, then press
4. Press or to set the home city, then press
or
to select “Set Time Zone”,
4. Select “Set Alarm”, then press
.
.
5. Select “List Alarm”, then press
.
.
6. Press
then press
Up to 5 alarm times can be specified.
7. Select “Set Time”, then press
or
to select the desired alarm number,
.
.
To Customise the Time Zone
1. Perform steps 1 to 3 in “Setting the Date and Time”
.
on page 64.
2. Press
or
to select “Set Time Zone”, then
press
.
Organiser
66
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Enter the alarm time using the digit keys, then press
6. When selection is complete, press
.
.
To Change the Vibration of Alarm
When you enter the alarm time in a 12-hour clock
format, press
1. Perform steps 1 to 6 in “Setting Alarm” on page 66.
and change am/pm.
2. Press
or
or
or
to select “Alarm Tone”, then press
to select “Vibration”, then press
to select “Enable”, “Disable” or
9. Press
or
or
or
or
to select “Repeat Daily”, then press
.
.
3. Press
10.Press
to select “On” or “Off”, then press
to select “Alarm Status”, then press
.
.
4. Press
11.Press
“Link to Sound”, then press
.
.
To Change the Duration of Alarm
12.Press
to select “On”, then press
.
1. Perform steps 1 to 10 in “Setting Alarm” on
To Change the Type of Alarm Tone
1. Perform steps 1 to 6 in “Setting Alarm” on page 66.
page 66.
2. Press
or
or
to select “Alarm Tone”, then press
to select “Duration”, then press
2. Press
or
to select “Alarm Tone”, then press
.
.
3. Press
3. Select “Melody”, then press
.
.
4. Press or to select “Preset Melody” or
The current duration is displayed.
“Sound Gallery”, then press
.
4. Enter the length of the duration in 2 digits (02 to 59
5. Select the alarm tone.
seconds) using the digit keys, then press
.
If you wish to hear the demo play, press
[Play].
To stop playing, press
[Stop].
67
Organiser
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
3. Press
or
or
to select “Reset Alarm”, then press
• For the alarm to work, the phone must be switched
on. If you wish to use the phone as an alarm clock
you may be disturbed by incoming calls or messages
notifications.
.
4. Press
.
Resetting All Alarm Settings
1. Perform steps 1 to 4 in “Setting Alarm” on page 66.
Changing Alarm Settings
2. Press
or
to select “Clear All”, then press
1. Perform steps 1 to 5 in “Setting Alarm” on page 66.
.
2. Select the number you wish to change by pressing
3. Press
or
to select “Yes”, then press
.
or
, then press
.
3. Change Alarm settings.
Voice Memo (M 5-4)
For details on changing Alarm settings, see “To
Change the Type of Alarm Tone” on page 67.
This allows you to record a voice message of up to 10
seconds, which can be used to remind you of schedule
entries or be sent within an MMS. The recorded voice
memo is registered in the Sound Gallery.
Disabling Alarm Function
1. Perform steps 1 and 2 in “Changing Alarm
Settings”.
Recording a Voice Memo
2. Press
or
to select “Alarm Status”, then press
1. Press
to display the Main Menu.
or to select “Organiser”, then press
or to select “Voice Memo”, then press
.
2. Press
.
3. Press
or
to select “Off”, then press
.
3. Press
“
” disappears from the screen.
.
Resetting an Alarm Setting
4. Press
to start recording.
1. Perform steps 1 to 5 in “Setting Alarm” on page 66.
To stop recording before the recording time is over,
press [Stop]
2. Select the number you wish to reset by pressing
.
or
, then press
.
Organiser
68
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Select “Save” to save the voice memo, then press
Help List (M 5-5)
.
You can view the help list and use it to guide you in the
phone’s functions.
If you wish to exit the voice memo, press
[Exit].
1. Press
to display the Main Menu.
6. Press
or
to select “Yes”, then press
.
2. Press
or
or
to select “Organiser”, then press
to select “Help List”, then press
.
To cancel exiting, select “No” in step 6, then press
.
3. Press
.
Tip
• You can also record a voice memo by pressing
and instead of steps 1 to 3.
• If you wish to record a voice memo again, select
“Record Again” in step 5. The screen will return to
step 4.
The help list is displayed.
4. Check the key operation by pressing
5. When you have finished, press
and
.
[Back].
To Play Back the Saved Voice Memo
1. Perform steps 1 to 4 in “Recording a Voice Memo”
on page 68.
2. Press
or
to select “Playback”, then press
.
3. Press
.
The recorded voice memo is played back.
To stop playback, press [Stop].
69
Organiser
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
Call Manager
• You can also confirm call records by pressing
stand-by mode.
• You can switch between histories by pressing
in
or
Call Register
The phone will record the last 10 missed calls, received
calls and dialled numbers.
in step 5 only when you enter by
mode.
in stand-by
Viewing Call Register
Sending Messages
1. Press
to display the Main Menu.
1. Perform steps 1 to 5 in “Viewing Call Register”.
2. Press
or
to select “Call Manager”, then press
to select “Call Register”, then press
to select “Missed Calls”, “Received
2. Select the file name you wish to send by pressing
.
or
, then press
.
3. Press
or
or
3. Press
or
.
to select “Send Message”, then
to select “MMS” or “SMS”, then
.
press
4. Press
4. Press
or
Calls” or “Dialled Numbers”, then press
.
press
.
The selected call register list is displayed.
5. Enter your message.
5. Select the number you wish to view by pressing
For details on creating a message, see “Creating a
New MMS” on page 98 or “Creating a New SMS”
on page 106.
or
.
6. Press
[View].
Call record “1” is the most recent.
Deleting Call Register
When you press
, call record “2” will be
Deleting Single Call Record
displayed.
If you wish to dial the number, press
.
1. Perform steps 1 to 5 in “Viewing Call Register”.
7. When you have finished, press
[Back] to
2. Press
.
return to step 4.
3. Press
or
to select “Delete”, then press
.
Call Manager
Download from Www.Somanuals.com. All Manuals Search And Download.
70
4. Press
or
to select “Yes”, then press
.
Call Timers (M 6-2-5)
The selected call record will be deleted.
To cancel deletion, select “No” in step 4, then press
.
Checking the Duration of the Last Call
1. Press
to display the Main Menu.
To Delete All Call Register (M 6-2-4)
2. Press
or
to select “Call Manager”, then press
to select “Call Register”, then press
to select “Call Timers”, then press
1. Perform steps 1 to 3 in “Viewing Call Register” on
.
page 70.
3. Press
or
or
2. Press
or
to select “Clear Logs”, then press
.
.
4. Press
3. Select “All Calls”, then press
4. Press or to select “Yes”, then press
All call register records will be deleted.
.
.
.
5. Select “Last Call”, then press
.
The duration of the last call is now displayed.
To cancel deleting, select “No” in step 4, then press
.
6. When you have finished, press
[Back] to
return to call timers menu.
Tip
Checking the Total Call Time
• If you select “Missed Calls”, “Received Calls” or
“Dialled Numbers” in step 3, the call register in the
selected category will be deleted.
1. Press
or
to select “All Calls”, then press
in step 5 in “Checking the Duration of the Last
Call”.
2. When you have finished, press
[Back].
71
Call Manager
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Charge Rate
Set the charge rate to calculate the call cost and set the
maximum limit for call cost.
Call Costs (M 6-2-6)
This function lets you check the charges for your calls.
Charging Advice is not supported on all networks.
Please check with your service provider for availability.
1. Perform steps 1 to 4 in “Checking the Cost of the
Last Call”.
Checking the Cost of the Last Call
2. Press
or
or
to select “Cost Units”, then press
to select “Set Units”, then press
1. Press
to display the Main Menu.
.
2. Press
or
to select “Call Manager”, then press
to select “Call Register”, then press
to select “Call Costs”, then press
3. Press
.
.
3. Press
or
or
4. Enter your PIN2 code, then press
5. Enter a cost per unit, then press
To enter a decimal point, press
.
.
.
4. Press
.
.
6. Enter a currency unit (up to 3 characters), then press
5. Select “Last Call”, then press
.
.
The cost of the last call is now displayed.
6. When you have finished, press
[Back] to
Checking the Charge Rate
return to call timers menu.
1. Select “Read Units”, then press
“Setting the Charge Rate”.
at step 3 in
[Back].
Checking the Total Call Cost
The charge rate is now displayed.
1. Press
in step 5 in “Checking the Cost of the Last Call”.
2. When you have finished, press [Back].
or
to select “All Calls”, then press
2. When you have finished, press
Call Manager
Download from Www.Somanuals.com. All Manuals Search And Download.
72
Setting the Charge Limit
This function is useful if you wish to make sure you do
not exceed a certain charge limit.
3. Press
or
or
to select “Call Register”, then press
to select “Call Timers” or “Call
.
4. Press
1. Perform steps 1 to 4 in “Checking the Cost of the
Costs”, then press
5. Press or to select “Clear Timers” or “Clear
Costs”, then press
6. Press or to select “Yes”, then press
To cancel resetting, select “No”, then press
7. Enter your PIN2 code, then press
.
Last Call” on page 72.
2. Press
or
or
to select “Max Cost”, then press
to select “Set Limit”, then press
.
.
.
3. Press
.
.
.
4. Enter your PIN2 code, then press
5. Enter a value, then press
.
The Call Timers and Costs are reset to zero.
.
Checking the Residual Credit
To enter a decimal point, press
.
1. Perform steps 1 to 4 in “Checking the Cost of the
Checking the Charge Limit
Last Call” on page 72.
1. Select “Read Limit”, then press
at step 3 in
2. Press
or
.
to select “Residual Credit”, then
[Back].
“Setting the Charge Limit”.
press
The value of the charge limit is now displayed.
2. When you have finished, press [Back].
Resetting All Call Timers and Call Costs
3. When you have finished, press
1. Press
to display the Main Menu.
or to select “Call Manager”, then press
2. Press
.
73
Call Manager
Download from Www.Somanuals.com. All Manuals Search And Download.
Data Counter (M 6-2-7)
Diverts (M 6-3)
This service is used to divert incoming calls to your
voice mail system or to another number depending on
certain conditions in which you cannot answer a call.
You can confirm the amount of bytes which you used
in the GPRS transmission.
1. Press
to display the Main Menu.
Divert Calls
2. Press
or
to select “Call Manager”, then press
to select “Call Register”, then press
to select “Data Counter”, then press
to select “Last Data” or “All Data”,
.
1. Press
to display the Main Menu.
3. Press
or
or
or
2. Press
or
to select “Call Manager”,
.
then press
.
4. Press
3. Press
or
to select “Diverts”, then press
.
.
5. Press
4. Select one of the divert options by pressing
, then press
The divert options available are:
• “All Calls”: Diverts all voice calls without
ringing.
or
then press
.
.
You can now check the amount of bytes.
6. When you have finished, press
[Back].
Resetting All Data Counter
• “When Busy”: Diverts incoming calls when you are
on a call.
1. Perform steps 1 to 4 in “Data Counter”.
2. Press
or
to select “Clear Counter”, then press
•
“No Answer”
:
Diverts incoming calls if you do
not answer a call within a certain
period of time.
.
3. Press
or
to select “Yes”, then press
.
• “Not Reachable”: Diverts incoming calls when
your phone is out of network
The Data Counter is reset to zero. To cancel
resetting, select “No” at step 3, then press
.
service or switched off.
5. Select “On”, then press
.
Call Manager
Download from Www.Somanuals.com. All Manuals Search And Download.
74
6. If you wish to divert calls to a number which is
located in the Phonebook, search for the desired
Phonebook entry.
2. Select the divert option you wish to check by
pressing or , then press
3. Press to select “Status”, then press
.
or
.
Press
name or press
or
[Search] to search the number by
You can now check the status of the selected divert
option.
or
to search in alphabetical
order, then press
Phonebook entries, see “Finding a Name and
Number” on page 27.
. For details on searching the
4. When you have finished, press
[Back].
Cancelling All Divert Settings
1. Perform steps 1 to 3 in “Divert Calls” on page 74.
7. If you wish to divert calls to a number which you
2. Press
or
to select “Cancel All”, then press
can enter manually, enter the phone number.
.
8. Press
.
3. Press
or
to select “Yes”, then press
.
If you select “No Answer” in step 4:
To cancel the resetting, select “No” in step 3, then
9. Enter the period of time using the digit keys (05 to
press
.
30 seconds), then press
.
4. Press
[OK].
Note
All divert settings are cancelled.
• When a divert is set to “All Calls”, “
on the stand-by screen.
” appears
To cancel the Divert Settings Individually
1. Perform steps 1 to 3 in “Divert Calls” on page 74.
2. Select the divert option you wish to cancel by
Tip
• If you select “By Service” in step 5, you can select the
divert option further in the selected option in step 4.
pressing
3. Press
4. Press
The selected divert has been cancelled.
or
, then press
to select “Off”, then press
[OK].
.
Checking the Divert Status
or
.
1. Perform steps 1 to 3 in “Divert Calls” on page 74.
75
Call Manager
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select “Animation” or “Illustration 1” to
Settings
“Illustration 3” by pressing
.
or
, then press
Phone Settings
5. Press
again to set.
Changing the Language (M 7-1-1)
You can change the display language that the phone
uses for the display messages and text entry.
The selected animation or illustration is displayed
on the stand-by screen.
1. Press
to display the Main Menu.
or to select “Settings”, then press
Note
• Even if an animation is selected, the stand-by screen
displays a static image when you do not operate the
phone for about 30 seconds (It is different according
to the selected data).
2. Press
.
3. Select “Phone Settings”, then press
4. Select “Language”, then press
.
.
5. Press
or
to select the desired language, then
Tip
press
.
• To cancel the Wallpaper setting, select “Off” in step
5.
Wallpaper for the Stand-by Screen (M 7-1-2)
For the stand-by screen, an animation and 3 illustrations
are provided.
To Set an Original Image for the Stand-by Screen
1. Perform steps 1 to 3 in “To Set Built-in Animations
Images taken with the digital camera or downloaded
from a WAP site can be used for Wallpapers.
or Illustrations”.
2. Press
or
to select “Original”, then press
.
To Set Built-in Animations or Illustrations
The file names of the images that are registered in
the Image Gallery is displayed.
1. Perform steps 1 to 3 in “Changing the Language”.
3. Select the image by pressing
or
, then press
2. Press
or
to select “Wallpaper”, then press
.
.
The selected image is displayed.
3. Press
or
to select “On”, then press
.
Settings
76
Download from Www.Somanuals.com. All Manuals Search And Download.
4. To determine what part of the image is chosen to be
displayed, select it by pressing or
then press
When you select “On” in step 4:
,
,
,
.
then press
.
The selected image is displayed on the stand-by
screen.
To Turn On/Off the Backlight whilst Charging with
the Cigarette Lighter Charger
Note
1. Perform steps 1 and 2 in “To Turn On/Off the
• Some images cannot be used because of their image
and data types.
Backlight”.
2. Press
3. Select “On” to set backlight on or “Off” to set
backlight off by pressing or , then press
Adjusting the LCD Screen (M 7-1-4)
or
to select “In Car”, then press
.
Backlight (M 7-1-3)
You can turn the backlight of the main screen display
on or off when you press the keypad or the optional
cigarette lighter charger is connected to the phone.
.
You may sometimes need to adjust the LCD contrast to
suit certain lighting conditions.
You can change or specify the amount of time the
backlight is ON for, which will help conserve battery
life.
1. Perform steps 1 to 3 in “Changing the language” on
page 76.
To Turn On/Off the Backlight
2. Press
or
.
to select “LCD Contrast”, then
1. Perform steps 1 to 3 in “Changing the Language” on
press
page 76.
3. Press
(Dark) or (Light) to adjust the contrast
2. Press
or
to select “Backlight”, then press
for maximum clarity.
LCD contrast can be adjusted in 9 levels.
4. Press
.
3. Press
or
to select “On/Off”, then press
.
.
.
4. Select “On” to set backlight on or “Off” to set
backlight off by pressing or , then press
77
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Colour Reduction (M 7-1-5)
Setting the Greeting Message (M 7-1-6)
You can set the message which will appear when the
phone is turned on.
The colour of the screen of this phone is automatically
reduced for preventing battery draining if it is not
operated.
1. Perform steps 1 to 3 in “Changing the Language” on
You can change the time the Colour Reduction will go
into effect works between 2 and 20 minutes, or disable
this function.
page 76.
2. Press
or
.
to select “Greeting Message”, then
press
Tip
3. Press
or
to select “On”, then press
.
• When you purchase this phone, the colour reduction
is set to work 2 minutes later.
4. Enter the message, then press
.
Up to 16 characters can be stored as a message.
For details on entering characters, see “Entering
Characters” on page 23.
1. Perform steps 1 to 3 in “Changing the language” on
page 76.
2. Press
or
to select “Colour Reduction”, then
Tip
press
.
• To cancel the Greeting Message setting, select “Off”
in step 3.
3. Select “On” to set the colour reduction function on
or “Off” to set it off by pressing or , then
press
When you select “On” in step 3:
Assign Images (M 7-1-7)
.
Images can be displayed when turning the power on or
off, when receiving an incoming call, or when
operating the alarm.
4. Enter the time until the colour reduction works in
two digits (02 to 20 minutes) using the digit keys,
Images taken by a digital camera or downloaded from a
WAP site can be used.
then press
.
Note
• The colour reduction does not work whilst you are
calling or using WAP service.
Settings
78
Download from Www.Somanuals.com. All Manuals Search And Download.
To Set Built-in Images
3. Select the image by pressing
or
, then press
.
page 76.
The selected image is displayed.
2. Press
or
.
to select “Assign Images”, then
4. To determine what part of the picture is chosen to be
displayed, select it by pressing or
then press
press
,
,
,
.
3. Select the screen to set the image by pressing
, then press
4. Select “Animation 1” or “Animation 2” by pressing
or , then press
or
.
Note
• Some images cannot be used because of their image
and data types.
.
or
Select “Illustration 1” or “Illustration 2” by pressing
Phone Setting Reset (M 7-1-8)
The phone settings can be reset to their default settings.
or
, then press
when you select “Alarm”
1. Perform steps 1 to 3 in “Changing the Language” on
in step 3.
page 76.
The selected image is displayed.
5. Press
Tip
2. Press
or
.
to select “Set to Default”, then
.
press
3. Enter your handset code, then press
.
• To cancel the image setting, select “Off” in step 4.
4. Press or to select “Yes”, then press
.
To cancel resetting, select “No” in step 4, then press
.
To Set an Original Image
1. Perform steps 1 to 3 in “To Set Built-in Images”.
All phone settings are reset.
2. Press
or
to select “Original”, then press
.
Note
The file name of the image that is registered in the
Image Gallery is displayed.
• If you enter a wrong handset code in step 3, operation
is cancelled.
79
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
To Check the Call Waiting Service Status
Call Settings
Set various types of functions and services.
1. Perform steps 1 to 4 in “Call Waiting”.
2. Press
or
to select “Status”, then press
.
Call Waiting (M 7-2-1)
If you wish to be able to receive another incoming call
whilst you have a call in progress, you must activate the
Call Waiting service.
Now you can check the status of the Call Waiting
service.
3. Press
[Back].
1. Press
to display the Main Menu.
Display Call Timers (M 7-2-2)
2. Press
or
or
to select “Settings”, then press
.
1. Perform steps 1 to 3 in “Call Waiting”.
3. Press
to select “Call Settings”, then press
2. Press
then press
3. Select “On” or “Off” by pressing
press
or
to select “Display Call Timers”,
.
.
4. Select “Call Waiting”, then press
5. Select “On” to activate the Call Waiting service or
“Off” to deactivate it by pressing or , then
.
or
, then
.
Caller No. Status (M 7-2-3)
This lets you control whether to show your phone
number or caller’s phone number when calling another
party.
press
.
6. Press
[OK].
Note
Caller No. Status is not supported on all networks.
Please check with your service provider for availability.
• Call Waiting service may not be available on all
mobile phone networks. Contact your network
operator for more information.
1. Perform steps 1 to 3 in “Call Waiting”.
2. Press
or
to select “Caller No. Status”, then
press
.
3. Select the option you wish to set by pressing
, then press
or
.
Settings
80
Download from Www.Somanuals.com. All Manuals Search And Download.
The options available are:
Note
illegal operation message, in the phone’s screen.
• “Show Callers No.”: Select if you wish to see the
phone number from any
callers before you answer.
Personal Call (M 7-2-4)
A specified ringing tone or vibrator setting can be
associated to a pre-registered phone number.
• “Show your No.”:
Select if you wish to show
your phone number.
Up to 20 phone numbers can be registered.
• “Show Called No.”: Select if you wish to see the
phone number of the phone
1. Perform steps 1 to 3 in “Call Waiting” on page 80.
you are connected to, even if
your call is diverted to another
phone number.
Select if you wish to hide your
phone number from any
callers.
2. Press
or
to select “Personal Call”, then press
.
3. Select the number you wish to set by pressing
, then press
4. Enter the phone number, then press
If you wish to select the phone number in the
Phonebook, search for the desired Phonebook entry.
Press or [Search] to search the number
or to search in alphabetical
. For details on searching the
or
• “Hide if Called”:
.
.
4. Select “On” to activate the option you wish to set or
“Off” to deactivate it by pressing or , then
press
.
by name or press
order, then press
To Check the Caller No. Status
1. Perform steps 1 to 3 in “Caller No. Status” on
Phonebook entries, see “Finding a Name and
Number” on page 27.
page 80.
2. Press
or
to select “Status”, then press
.
5. Press
or
.
to select “Assign Melody”, then
Now you can check the status of the Caller No.
Status.
press
3. Press
[OK].
81
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select a ringing tone.
5. Press
or
to select “Assign Melody”, then
press
.
Type” on page 57.
6. Select a ringing tone.
7. Press
or
to select “Vibration”, then press
.
For details on selecting a ringing tone, see “Ringer
Type” on page 57.
8. Press
or
to select “Enable”, “Disable” or
“Link to Sound”, then press
.
7. Press
or
to select “Vibration”, then press
.
For details on setting the vibrator, see “Vibration”
on page 58.
8. Press
or
to select “Enable”, “Disable” or
“Link to Sound”, then press
.
9. When setting is complete, select “Setup End”, then
For details on setting the vibration, see “Vibration”
on page 58.
press
.
9. When setting is complete, select “Setup End”, then
Group Call (M 7-2-5)
Phone numbers can be registered or updated in groups.
press
.
To Set Group Ringing Tone
Tip
Different ringing tones can be set for each group.
• To cancel the ringing tone setting, select “Off” in
step 4.
When you purchase this phone, groups are set to off.
If you do not set a group ringing tone the default ringing
tone will be used.
Auto Redial (M 7-2-6)
See “Automatic Redialling” on page 19 about this
function.
1. Perform steps 1 to 3 in “Call Waiting” on page 80.
Minute Minder (M 7-2-7)
2. Press
or
to select “Group Call”, then press
Minute Minder function informs you of your talk time
by sounding a tone after every minute.
.
3. Select the group you want to set by pressing
or , then press
4. Press or to select “On”, then press
1. Perform steps 1 to 3 in “Call Waiting” on page 80.
.
.
Settings
82
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press
or
.
to select “Minute Minder”, then
to select “On” or “Off”, then press
Network Settings
press
Selecting a Network Automatically (M 7-3-1)
This section is only relevant if you are using your phone
abroad.
3. Press
or
.
Each time the power is turned on, your phone will
always try to connect first to the most recently available
network, then to the subscribed network, and lastly to
the preferred network.
Call Setting Reset (M 7-2-8)
The call settings can be reset to their default settings.
1. Perform steps 1 to 3 in “Call Waiting” on page 80.
2. Press
or
to select “Set to Default”, then
If none of these are found, it will then search for any
other available GSM networks.
press
.
3. Enter your handset code, then press
.
1. Press
to display the Main Menu.
4. Press or to select “Yes”, then press
.
2. Press
or
to select “Settings”, then press
.
To cancel resetting, select “No” at step 4, then press
.
3. Press
or
.
to select “Network Settings”, then
press
All call settings are reset.
4. Select “Select Network”, then press
.
Note
5. Select “Automatic”, then press
.
• If you enter the wrong handset code in step 3, the
operation is cancelled and the screen returns to step
3 in “Call Waiting” on page 80.
To Set the Network Manually
1. As in step 5 in “Selecting a Network
Automatically”, press
or
to select
“Manual”, then press
.
2. Select the network from the list by pressing
, then press
or
.
83
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding a New Network
4. Press
or
to select “Insert” or “Add to End”,
then press
.
1. Perform steps 1 to 4 in “Selecting a Network
Automatically”.
To Delete a Network from the Preferred List
2. Press
or
.
to select “Add New Network”, then
1. Perform steps 1 to 3 in “To Change the Position of
press
a Network in the Preferred List”.
3. Press
or
to select “Add”, then press
.
2. Press
or
to select “Delete”, then press
.
4. Enter the country code.
5. Press
6. Enter the network code.
7. Press
8. Enter a new network name.
9. Press
Changing the Network Password (M 7-3-2)
1. Perform steps 1 to 3 in “Selecting a Network
Automatically” on page 83.
.
.
2. Press
or
to select “Change Password”, then
press
.
.
3. Enter the old password, then press
.
4. Enter a new password, then press
.
Editing the Preferred List
5. Enter a new password again, then press
.
To Change the Position of a Network in the
Preferred List
If you enter the incorrect password in step 5, the
screen will return to step 4 and you will be asked to
enter the password again.
1. Perform steps 1 to 4 in “Selecting a Network
Automatically”.
6. Press
.
2. Press
or
to select “Set Preferred”, then press
.
3. Select the name of the network to change the
position from the list by pressing or , then
press
.
Settings
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet Settings (M 7-4)
Item
Description
Homepage
Operation
Select “Homepage” and
WAP/MMS Settings
WAP Settings and MMS Settings can perform
following various setups, respectively.
press
Enter Homepage URL, if
needed, and press
Select “Port Number” and
press
Enter Port Number (1024-
65535) and press
Select “Circuit Prompt” and
press
.
Homepage
.
Note
• The URL set up in “Homepage” of the WAP Settings
is set to the connection point URL of Homepage in
“Viewing the WAP Browser”. (p. 95)
• Your GX1 comes complete with the settings for your
network. You should not have to change them.
.
Security
Option
Port Number*
.
WAP Settings
.
Circuit Prompt Circuit Prompt
Select “Enable” or “Dis-
able” and press
Select “Connection Type”
and press
Item
Description
WAP Profile
Operation
Select “Profile Name” and
.
press
.
Profile Name* Name (Unique
Name)
Enter the strings you like
and press
Select “IP Address” and
press
Enter IP address for WAP
and press
.
Connection
Type
Bearer Con-
nection Type
.
Select “GPRS Then CSD”,
“GPRS” or “CSD” and press
.
.
IP Address*
IP address
GPRS Settings (If “GPRS then CSD” or “GPRS” will be
selected as connection type, they should be set)
.
85
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Operation
Item
Description
Operation
Select “APN” and press
Select “Line Type” and
.
press
Select “ISDN” or “Analogue”
and press
Select “UserName” and
press
.
Access Point
Name
ISDN or Ana-
logue
APN*
Line Type
Enter Access Point Name
and press
Select “UserName” and
press
.
.
.
.
UserName User Name
Password Password
Linger Time Linger Time
UserName User Name
Password Password
Linger Time Linger Time
Enter User Name and press
Enter User Name and press
.
.
Select “Password” and
Select “Password” and
press
.
press
.
Enter Password and press
Enter Password and press
.
.
Select “Linger Time” and
Select “Linger Time” and
press
.
press
.
Enter second time (0-
99999) and press
Enter second time (0-
99999) and press
.
.
CSD Settings (If “GPRS then CSD” or “CSD” will be selected
as connection type, they should be set)
*: Item to be set as mandatory.
Select “Phone No.” and
press
Enter Access Point Num-
ber and press
.
Access Point
Number
Phone No.*
.
Settings
86
Download from Www.Somanuals.com. All Manuals Search And Download.
MMS Settings
Item
Description
Operation
GPRS Settings (If “GPRS then CSD” or “GPRS” will be
selected as connection type, they should be set)
Item
Description
MMS Profile
Operation
Select “Profile Name” and
Select “APN” and press
press
.
Profile Name* Name (Unique
Name)
.
Access Point
Name
Enter the strings you like
and press
Select “IP Address” and
press
Enter IP address for MMS
and press
Select “Relay Server URL”
and press
Enter URL of the Relay
Server and press
Select “Port Number” and
press
Enter Port Number (1024-
65535) and press
Select “Connection Type”
and press
APN*
Enter Access Point Name
and press
Select “UserName” and
press
.
.
.
IP Address*
IP address
.
UserName User Name
Enter User Name and press
.
.
Select “Password” and
.
Relay Server MMS Relay
press
.
URL*
Server
Password Password
Linger Time Linger Time
Enter Password and press
.
.
Select “Linger Time” and
.
Security
Option
Port Number*
press
.
Enter second time (0-
99999) and press
.
.
CSD Settings (If “GPRS then CSD” or “CSD” will be selected
as connection type, they should be set)
.
Connection
Type
Bearer Con-
nection Type
Select “GPRS Then CSD”,
“GPRS” or “CSD” and press
.
87
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
To Set up your Account Information
This information should be supplied by your Internet
service provider.
Item
Description
Operation
Select “Phone No.” and
press
Enter Access Point Num-
ber and press
Select “Line Type” and
press
Select “ISDN” or “Analogue”
and press
Select “UserName” and
press
.
Access Point
Number
Phone No.*
1. Press
to display the Main Menu.
2. Press
or
to select “Settings”, then press
.
.
3. Press
or
to select “Internet Settings”, then
press
.
.
ISDN or Ana-
logue
Line Type
4. Press
or
to select “WAP Settings” or “MMS
Settings”, then press
5. Select the profile name you wish to edit by pressing
or , then press
6. Press or to select “Edit”, then press
.
.
.
.
UserName User Name
Password Password
Linger Time Linger Time
Enter User Name and press
.
.
7. Select the item you wish to edit, then press
8. Edit each item.
.
Select “Password” and
press
.
9. When you have finished editing, select “Setup
Enter Password and press
End”, then press
.
.
To Select Network Connection Profile
Select “Linger Time” and
1. Perform steps 1 to 4 in “To Set up your Account
press
.
Information”.
Enter second time (0-
99999) and press
2. Select the profile name to use by pressing
or
.
, then press
.
*: Item to be set as mandatory.
3. Press or
to select “Activate”, then press
.
Settings
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Infrared (M 7-5)
Security (M 7-6)
You can use the built-in infrared modem to establish
contact between your phone and a PC equipped with an
infrared port.
Key Lock
As a safety precaution to prevent accidental use, you
can lock your phone’s keys when not in use.
1. Press
2. Press
3. Press
4. Press
to display the Main Menu.
Locking the Keypad
or
or
or
to select “Settings”, then press
to select “Infrared”, then press
to select “On”, then press
.
.
1. Press
, then press
.
“
” will appear on the screen.
.
Note
“
” will appear on the screen.
The infrared setting will return to off when no data
is transmitted/received via infrared communication.
• Even if the key are locked, Emergency Calls are still
possible.
To Unlock the Keys
1. Press
, then press
.
“
” will disappear.
Enabling/Disabling the PIN Code (M 7-6-1)
If the PIN code is enabled you will be asked in enter the
PIN code each time the phone is switched on. Your PIN
code is stored on the SIM and you should have been
made aware of the code when you purchased the SIM.
Contact your service provider for further details.
1. Press
2. Press
3. Press
to display the Main Menu.
or
or
to select “Settings”, then press
to select “Security”, then press
.
.
4. Select “PIN Entry”, then press
.
89
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press
or
to select “On” or “Off”, then press
Handset Lock (M 7-6-2)
The Handset Lock is an additional security feature
which prevents unauthorised use of the phone or certain
features. The default Handset Lock code is “0000”.
.
6. Enter your PIN code, then press
.
Note
1. Perform steps 1 to 3 in “Enabling/Disabling the PIN
• If you enter the wrong PIN code three times in step 6,
the SIM will lock. To remove the lock, contact your
service provider/SIM vendor.
code”.
2. Press
or
to select “Handset Lock”, then
press
.
Changing PIN Code
This allows you to change the PIN code stored on the SIM.
3. Press
or
to select “On” or “Off”, then press
.
1. Perform steps 1 to 3 in “Enabling/Disabling the PIN
4. Enter your handset code, then press
.
code”.
If you enter an incorrect handset code, the screen
will clear and you will be prompted to enter the code
again.
2. Press
or
or
to select “PIN Entry”, then press
to select “Change PIN”, then press
.
3. Press
Changing Handset Code
The default handset code is “0000”.
.
4. Enter the existing PIN code, then press
5. Enter a new PIN code, then press
6. Enter a new PIN code again, then press
.
1. Perform steps 1 and 4 in “Handset Lock”.
.
2. Press
or
to select “Change Code”, then press
.
.
If you enter a code different from the code which
you entered in step 6, the screen returns to step 5.
Enter the correct code again.
3. Enter the old handset code, then press
.
4. Enter a new handset code, then press
.
Settings
90
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Enter a new handset code again, then press
.
1. Perform steps 1 to 3 in “Enabling/Disabling the PIN
Code” on page 89.
If you enter a code different from the code which
you entered in step 5, the screen returns to step 4.
Enter the correct code again.
2. Press
or
to select “Call Barring”, then press
to select call barring option, then
.
Changing PIN2 Code (M 7-6-3)
3. Press
or
.
PIN2 code is used to protect certain functions in the
phone such as Fixed Dialling No. and call cost limits.
The following shows you how to change PIN2 code.
press
The call barring functions available are:
• “Bar Foreign Calls”: Restricts all outgoing
international calls.
1. Perform steps 1 to 3 in “Enabling/Disabling the PIN
code” on page 89.
•
“Only Local & Home”: Restricts all outgoing
international calls except to
2. Press
or
to select “Change PIN2”, then press
.
your home country.
3. Enter the existing PIN2 code, then press
4. Enter a new PIN2 code, then press
5. Enter a new PIN2 code again, then press
.
• “Bar Incoming Calls”: Restricts all incoming calls.
•
.
“
Bar Inc. if Abroad”
:
Restricts all incoming calls
when you are outside of the
coverage from your
.
If you enter a code different from the code which
you entered in step 5, the screen returns to step 4.
Enter the correct code.
registered network operator.
• “Bar Outgoing Calls”: Restricts all outgoing calls
except emergency calls.
Call Barring (M 7-6-4)
This function lets you place restrictions on incoming
and outgoing calls. To activate Call Barring you will
need the call barring password, which will be available
from your service provider if this is supported on the
network.
4. Select one of the call barring options by pressing
or
, then press
.
91
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
The call barring options available are:
3. When you finish the confirmation, press
[Back].
• “All Services”:
• “Voice Calls”:
• “Data”:
• “Fax”:
• “Messages”:
• “All except Msgs.”:
Restricts all services.
Restricts all voice calls.
Restricts all data calls.
Restricts all fax calls.
Restricts all messages.
Restricts all services except
messages.
Cancel All Call Barring Settings
1. Perform steps 1 to 4 in “Call Barring” on page 91.
2. Press
or
to select “Cancel All”, then press
.
3. Enter the network password, then press
4. Press [OK].
All call barring settings are cancelled.
.
5. Select “On”, then press
.
If you select “Off”, the selected call barring setting
is cancelled.
To Cancel the Call Barring Setting Individually
1. Perform steps 1 to 5 in “Call Barring” on page 91.
2. Select the call barring option you wish to cancel by
pressing
3. Press
4. Enter the Barring password, then press
6. Enter the network password, then press
.
To change the network password, see “Changing
the Network Password” on page 84.
or
, then press
.
7. Press
[OK].
or
to select “Off”, then press
.
The selected call barring function is activated.
If you enter a wrong network password, the entered
password is cleared. Enter the correct password.
.
The selected call barring setting is cancelled.
Fixed Dialling No. (M 7-6-5)
When the Fixed Dialling No. is enabled, you can call to
only predefined numbers.
Checking Call Barring Status
1. Perform steps 1 to 6 in “Call Barring” on page 91.
2. Press
or
to select “Status”, then press
.
Enabling Fixed Dialling No.
Now you can check the status of the selected call
barring option.
1. Perform steps 1 to 3 in “Enabling/Disabling the PIN
code” on page 89.
Settings
92
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press
or
to select “Fixed Dialling No.”, then
3. Search for the desired name.
press
.
For details on searching a name, see “Finding a
Name and Number” on page 27.
3. Enter a PIN2 code, then press
.
Editing a Registered Name
4. Select “Settings”, then press
.
1. Perform steps 1 and 2 in “Adding a New Name”.
5. Select “On”, then press
.
2. Select a name you wish to edit, then press
3. Press or to select “Edit”, then press
.
If you select “Off”, Fixed Dialling No. is disabled.
.
Adding a New Name
4. Edit the selected name.
1. Perform steps 1 to 3 in “Enabling/Disabling the PIN
code” on page 89.
For details on editting a name, see “Editing
Phonebook Entries” on page 27.
2. Press
or
to select “Edit Dial List”, then press
.
Deleting a Registered Name
1. Perform steps 1 and 2 in “Adding a New Name”.
2. Select a name you wish to delete, then press
3. Press or to select “Delete”, then press
4. Select “Yes”, then press
The selected name will be deleted.
3. Press
.
.
4. Press
or
.
to select “Add New Name”, then
press
.
5. Add a name and a phone number.
.
For details on adding a name and a phone number,
see “Storing Names and Numbers” on page 25.
To cancell deletion, select “No” at step 4, then press
.
Searching a Registered Name
1. Perform steps 1 to 3 in “Adding a New Name”.
2. Press
or
to select “Search”, then press
.
93
Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Master Reset (M 7-7)
The settings can be reset to their default settings.
1. Press
to display the Main Menu.
2. Press
or
or
to select “Settings”, then press
.
3. Press
to select “Master Reset”, then press
.
4. Enter your handset code, then press
.
5. Press or to select “Yes”, then press
.
To cancel resetting, select “No” at step 5, then press
.
All settings are reset.
Note
• If you enter a wrong handset code in step 4, operation
is cancelled.
• The default Handset Lock code is “0000”.
Settings
94
Download from Www.Somanuals.com. All Manuals Search And Download.
To Exit the WAP Browser
1. Press to exit the browser.
Browser
Your phone contains a WAP browser used for surfing
on the Mobile Internet, where you can get a lot of useful
information. Normally, pages are designed for a mobile
phone.
Navigating a WAP Page
•
:
Used to switch the menu items.
•
•
•
•
•
/
:Used to select an action displayed in the
lower left corner of the screen.
:
Used to select an action displayed in the
lower right corner of the screen.
(press and hold):
Used to start the Go to URL.
to
(press and hold):
Used to start the Bookmark (WAP).
Exit (short press)
Setting up for the WAP browser
See “WAP/MMS Settings” on page 85 for instructions.
:
Turn off the phone. (press and hold)
Viewing the WAP Browser (M 8-1)
1. Press
[
] during stand-by.
•
:
Launch browser option menu.
2. Press
or
to select “Homepage”, then press
.
3. Select the menu you wish to view by pressing
, then press
or
.
95
Browser
Download from Www.Somanuals.com. All Manuals Search And Download.
Browser Menu
Reload:
Refresh the contents of the WAP page.
When you have started browsing, you can reach
Settings:
Includes “Restart Browser”, some settings,
etc.
browsing options by pressing
.
Bookmarks (M 8-2)
The Browser Menu contains the following:
The Bookmarks option helps you to store desired (or
frequently used) pages (addresses). It can save you time
in accessing WAP pages sites.
Back:
Used to display the previous page.
Home:
Go to the homepage you set in the WAP
Settings.
Adding a Bookmark
Bookmarks: Add the site you are currently browsing to
your list of bookmarks, or see the list of
bookmarks.
1. Press
[
] during stand-by.
2. Press
or
to select “Bookmarks”, then press
.
Go to URL: Input the URL of the site you wish to go,
and go to the site.
The list of Bookmarks is displayed.
3. Press [Options] to display the Options Menu.
Show URL: Display the URL you are currently
browsing.
When you add a bookmark for the first time, press
[Add] instead, then skip to step 5.
SnapShots: Save the page you are currently browsing
to your list of Snap Shots, or see the list of
Snap Shots.
4. Press
or
to select “Add”, then press
.
5. Enter the bookmark title, then press
.
Save Items: Save images or sounds to the Image
6. Enter the URL address, then press
.
Gallery or Sound Gallery.
Alert Inbox: See the list of WAP push messages. You
can receive push messages via WAP
Services. This means that a service
provider sends WAP content to your
phone, without you having to do anything.
Browser
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing Bookmarked Pages
Deleting Bookmarks
page 96.
page 96.
The list of Bookmarks is displayed.
The list of Bookmarks is displayed.
2. Select a bookmarked page you wish to access by
2. Select the desired bookmark to delete by pressing
pressing
or
, then press
.
or
, then press
[Options].
The Options Menu is displayed.
Editing Bookmarks
3. Press
4. Press
or
or
to select “Delete”, then press
to select “Yes”, then press
.
1. Perform steps 1 and 2 in “Adding a Bookmark” on
page 96.
.
The list of Bookmarks is displayed.
2. Select the desired bookmark to edit by pressing
or
, then press
[Options].
The Options Menu is displayed.
3. Press
or
to select “Edit”, then press
.
4. Edit the bookmark title.
For details on entering characters, see “Entering
Characters” on page 23.
5. Press
.
6. Edit the URL address.
7. Press
.
97
Browser
Download from Www.Somanuals.com. All Manuals Search And Download.
• “Expiry Time”
Messages
Your phone allows you to send and receive short
• “Sender Visibility”
• “Anonymous Reject”
• “Slide Interval”
messages, MMS and WAP mails.
5. Edit each of the items above.
MMS (Multimedia Messaging Service)
6. When you finish setting, press
[Back].
About MMS
MMS allows you to further personalise your messages
with pictures, sounds and animations.
Creating a New MMS (M 0-1-1)
1. Press
[
] during stand-by.
Note
2. Select “MMS”, then press
.
• Some MMS functions may not always be available
depending on your network. Contact your network
operator for more information.
3. Select “Compose”, then press
.
4. Enter your message, then press
5. Enter phone number or E-mail address of the
recipient, then press
.
Setting up MMS (M 0-1-5)
.
1. Press
2. Select “MMS”, then press
3. Press or to select “Settings”, then press
[
] during stand-by.
If you wish to select the phone number or E-mail
address in the Phonebook, search for the desired
Phonebook entry.
.
.
4. Select the desired item to set, then press
The items available are:
.
Press
by name or press
order, then press
or
[Search] to search the number
or to search in alphabetical
. For details on searching the
• “Download Msg.”
• “Intl. Download Msg.”
• “Delivery Report”
Phonebook entries, see “Finding a Name and
Number” on page 27.
• “Delivery Rep. Allow”
Messages
98
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Select “Send”, then press
The confirmation screen of file size is displayed.
7. Select “Yes”, then press
.
5. Enter the phone number or E-mail address of the
.
.
6. Press
[Back] twice.
After the message has been sent, the message is
added to the Sent box.
To Use the Text Template
1. Perform steps 1 to 3 in “Creating a New MMS” on
To Enter the Subject of the Message
page 98.
1. Perform steps 1 to 3 in “Creating a New MMS” on
2. Press
[Options] to display the Options Menu.
or to select “Insert Template”, then
.
page 98.
3. Press
2. Press
[Options] to display the Options Menu.
press
3. Select “Subject”, then press
.
4. Select the desired template from the list by pressing
or , then press
4. Enter the subject of your message, then press
.
.
To Add Recipients
To Save a Message in the Drafts Box
You can save a message in the Drafts box temporarily
and send it later, without sending it immediately.
1. Perform steps 1 to 5 in “Creating a New MMS” on
page 98.
1. Perform steps 1 to 5 in “Creating a New MMS” on
2. Press
or
to select “Add address”, then press
page 98.
.
2. Press
or
to select “Save”, then press
to
3. Select “To” to add recipients or “Cc” to send a copy
of this MMS to other recipients by pressing or
, then press
4. Select a desired number from the list by pressing
or , then press
save the message in the Drafts box.
.
Note
• You can send it later following the instructions in
“Sending a Message in the Drafts Box” on page 100.
.
99
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting Attached Data
Sending a Message in the Drafts Box
You can send images and sounds saved in the Gallery
attached to MMS.
1. Perform steps 1 and 2 in “Creating a New MMS” on
page 98.
You can attach a maximum of 6 images or sounds in all.
2. Press
3. Select the desired message to send in the Drafts box
by pressing or , then press [Options].
The Options Menu is display.
4. Press or to select “Send”, then press
The confirmation screen of file size is displayed.
5. Select “Yes”, then press
or
to select “Drafts”, then press
.
1. Perform steps 1 to 3 in “Creating a New MMS” on
page 98.
2. Press
[Options] to display the Options Menu.
or to select “Image” or “Sound”, then
3. Press
.
press
.
4. Select the file name you wish to attach by pressing
or , then press
.
.
The phone begins the sending process and the MMS
message is sent.
When an image is selected, it is displayed.
When a sound is selected, it is played.
Reading MMS (M 0-1-2)
5. Once you have confirmed the image, press
.
Messages you receive are stored in the Inbox, and
outgoing messages are stored in the Drafts box until
you send them, after which they move to the Sent box.
To Delete Attached Data
1. Perform steps 1 to 3 in “Inserting Attached Data”.
The list of attached data is displayed.
Incoming Messages
The MMS indicator ( ) will appear when you are
receiving an incoming message.
1. Perform steps 1 and 2 in “Creating a New MMS” on
2. Press
3. Press
4. Press
[Options].
or
or
to select “Remove”, then press
to select “Yes”, then press
.
.
page 98.
Messages
100
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press
or
to select “Inbox”, then press
.
3. Press
[Options] to display the Options Menu.
Messages are marked with “ ” denote mails with
attachments.
3. Press
4. Press
5. Enter your message.
or
.
to select the desired message, then
For details on entering characters, see “Entering
Characters” on page 23.
press
The message is displayed.
4. Scroll the screen by pressing
message.
6. Press
.
or
to read the
[Done].
The phone number or E-mail address of the
recipient is automatically filled in the sender’s
phone number or E-mail address.
5. When you finish viewing, press
7. Press
.
To Check the Sender and Receiver Phone
Number or E-mail Address
The subject field is automatically filled in with the
original subject preceded by “Re:”.
1. Perform steps 1 to 3 in “Incoming Messages” on
8. Select “Send”, then press
.
page 100.
The confirmation screen of file size is displayed.
2. Press
[Options] to display the Options Menu.
or to select “Details”, then press
9. Select “Yes”, then press
.
3. Press
.
The sender’s phone number or E-mail address, time
and date stamp, subject, attachment and size are
displayed.
Tip
• You can reply to a message to all addresses of
selected messages by selecting “Reply All” in step 5.
Replying to a Message to the Sender from
Inbox
1. Perform steps 1 and 2 in “Creating a New MMS” on
page 98.
2. Press
or
to select “Inbox”, then press
.
101
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Forwarding a Message
Note
• When the message with attached data is forwarded
the data is also sent. However, if there is any material
which the phone recognises as having copyright, it
will not be sent.
• “Subject” field is automatically filled in with the
original subject preceded by “Fw:”.
The original message and subject cannot be changed.
1. Perform steps 1 to 3 in “Replying to a Message to
the Sender from Inbox” on page 101.
2. Press
3. Enter the phone number or E-mail address of the
recipient, then press
or
to select “Forward”, then press
.
.
4. If you wish to select the phone number or E-mail
address in the Phonebook, search for the desired
Phonebook entry.
Modifying a Message
1. Perform steps 1 to 3 in “Replying to a Message to
the Sender from Inbox” on page 101.
Press
by name or press
order, then press
Phonebook entries, see “Finding a Name and
Number” on page 27.
The original message is displayed in the “Message”
field.
or
[Search] to search the number
or to search in alphabetical
. For details on searching the
2. Select “Edit”, then press
3. Modify the message, then press
4. Press
5. Select “Send”, then press
The confirmation screen of the file size is displayed.
.
.
.
.
6. Select “Yes”, then press
.
5. Select “Send”, then press
The confirmation screen of the file size is displayed.
6. Select “Yes”, then press
.
Note
• Messages cannot be edited if they contain particular
data such as SMIL, XHTML, copyrights or unknown
format.
.
Messages
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing the Mail Address of a Sender in the
Phonebook
Deleting Messages
1. Perform steps 1 to 3 in “Replying to a Message to
page 98.
the Sender from Inbox” on page 101.
2. Press
“Sent”, then press
3. Select the message you wish to delete by pressing
or , then press [Options].
The Options Menu is displayed.
4. Press or to select “Delete Message”, then
or
to select “Inbox”, “Drafts” or
2. Press
or
.
to select “Save to Phonebook”, then
.
press
The name entry screen is displayed.
3. Enter the name for the Phonebook entry.
For details on entering a name, see “Storing Names
and Numbers” on page 25.
press
.
Retrieving MMS
When “ ” is in the Inbox, the following can be done.
5. Press
or
to select “One Message” or “All
Message”, then press
.
1. Perform steps 1 and 2 in “Creating a New MMS” on
6. Select “Yes”, then press
.
page 98.
To cancel deletion, select “No”, then press
Note
• You cannot delete locked messages.
.
2. Press
or
or
to select “Inbox”, then press
to select a desired alert to
.
3. Press
download.
4. Press
to display the Alert Menu.
or to select “Download”, then press
5. Press
.
103
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
To Lock Messages
Press
by name or press
order, then press
or
[Search] to search the number
or to search in alphabetical
. For details on searching the
1. Perform steps 1 and 2 in “Deleting Messages” on
page 103.
Phonebook entries, see “Finding a Name and
Number” on page 27.
2. Select the message you wish to lock by pressing
or
The Options Menu is displayed.
3. Press or to select “Lock/Unlock”, then press
, then press
[Options].
9. Press
or
to select “Send” or “Save”, then
press
.
If you wish to send images and sounds, see
“Inserting Attached Data” on page 100.
.
Creating Slide Data
1. Press ] during stand-by.
Note
[
• You can create messages which have up to 3 slides.
Each slide can contain one image, one sound file and
up to 512 characters of text (up to the message total
30kb limit).
2. Select “MMS”, then press
.
3. Select “Compose”, then press
.
4. Press
[Options] to display the Options Menu.
or to select “Slide Show”, then press
• The slide options available are:
Add Slide:
To add a new slide.
5. Press
Delete Slide: To delete the active slide.
Previous Slide: To navigate to the previous slide.
.
6. Press
or
to select “On”, then press
.
Next Slide:
To navigate to the next slide.
• EVA data cannot be attached as a slide data to a
message.
7. Enter your message, then press
8. Enter the phone number or E-mail address of the
recipient, then press
.
.
If you wish to select the phone number or E-mail
address in the Phonebook, search for the desired
Phonebook entry.
Messages
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a Call to the Sender of a Message
You can make a call to the sender of a message in Inbox
whose address (From) is the phone number.
Setting up SMS
Before you can use SMS to send and receive messages,
you have to set up some personal and system
information.
1. Perform steps 1 and 2 in “Replying to a Message to
the Sender from Inbox” on page 101.
To set up the Service Centre Address (M 0-2-4)
2. Press
[Options] to display the Options Menu.
or to select “Call”, then press
1. Press
[
] during stand-by to display the
Message menu.
3. Press
.
2. Press
3. Press
or
or
to select “SMS”, then press
to select “Settings”, then press
.
SMS (Short Message Service)
.
About SMS
4. Select “Message Centre”, then press
.
The Short Message Service (SMS) allows you to send
text messages of up to 1024 characters to other GSM
users.
5. Enter the centre number.
If you wish to enter a country code for a message to
an international number, press and hold
a “+” sign appears.
until
Using SMS with Your Phone
Messages longer than 160 characters may be
composed. During sending, the messages will be split.
If the receiver has a suitable phone the messages will
recombine during reception, if not your message will
appear as a number of separate 160 characters
messages.
6. Press
.
You can send or receive SMS even if you are talking on
the phone.
You can also use Text Templates to help you compose
SMS.
105
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Validity Period
Connection Type
This indicates the number of days and hours for which
a message you send may remain undelivered to the
message recipient.
1. Perform steps 1 to 3 in “Setting up SMS” on page
105.
2. Press
or
During this period, the message service centre will
continually try to deliver the message to the recipient.
press
.
3. Select the connection type by pressing
then press
or
,
1. Perform steps 1 to 3 in “Setting up SMS” on page
.
105.
Creating a New SMS (M 0-2-1)
2. Press
or
to select “Message Lifetime”, then
press
.
1. Press
[
] during stand-by.
to select “SMS”, then press
2. Press
or
.
3. Select the validity period by pressing
then press
or
,
.
3. Select “Compose”, then press
.
4. Enter your message.
Message Format
For details on entering characters, see “Entering
Characters” on page 23.
1. Perform steps 1 to 3 in “Setting up SMS” on page
105.
5. Press
.
2. Press
or
to select “Message Format”, then
press
.
To Use the Text Template
3. Select the message format by pressing
then press
or
,
1. Perform steps 1 to 3 in “Creating a New SMS”.
.
2. Press
[Options] to display the Options Menu.
3. Press
or to select “Insert Template”, then
press
.
4. Select the desired template from the list by pressing
or , then press
.
Messages
106
Download from Www.Somanuals.com. All Manuals Search And Download.
To Save the Message in the Outbox
Reading SMS
1. Perform steps 1 to 5 in “Creating a New SMS”.
2. Enter the SMS phone number of the recipient, then
Incoming Messages
The SMS indicator ( ) will appear when an incoming
message arrives.
press
.
1. When you receive a SMS, press
.
3. Press
or
to select “Save”, then press
.
2. Press or to select the desired message.
Sending a Message
The sender’s phone number and a part of the
message are displayed. When the sender’s phone
number is stored in the Phonebook, the sender’s
name is displayed instead of the phone number.
Messages are marked with “ ” denote unread
messages.
1. Perform steps 1 to 5 in “Creating a New SMS”.
2. Enter the SMS phone number of the recipient, then
press
.
3. If you wish to select the SMS phone number in the
Phonebook, search for the desired Phonebook entry.
3. Press
.
Press
by name or press
order, then press
or
[Search] to search the number
or to search in alphabetical
. For details on searching the
4. Scroll the screen by pressing
or
to read the
.
message.
Phonebook entries, see “Finding a Name and
Number” on page 27.
5. When you have finished viewing, press
Replying to the Sender
4. Press
or
to select “Send”, then press
.
1. Perform steps 1 to 3 in “Reading SMS”.
The phone begins the sending process and the SMS
is sent.
2. Press
[Options] to display the Options Menu.
or to select “Reply”, then press
3. Press
.
4. Enter your message.
For details on entering characters, see “Entering
Characters” on page 23.
107
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press
.
Modifying a Message
Follow the procedure from step 2 in “Sending a
Message” on page 107.
1. Perform steps 1 and 2 in “Creating a New SMS” on
page 106.
2. Press
3. Select the desired message to modify in the Outbox
by pressing or , then press
4. Press [Options] to display the Options Menu.
or
.
Calling the Message Sender
1. Perform steps 1 to 3 “Reading SMS” on page 107.
.
2. Press
[Options] to display the Options Menu.
or to select “Call Sender”, then press
3. Press
.
5. Select “Edit”, then press
6. Modify the message, then press
.
Forwarding a Message
Follow the procedure from step 2 in “Sending a
Message” on page 107.
1. Perform steps 1 to 3 in “Reading SMS” on page
107.
Deleting Messages
2. Press
[Options] to display the Options Menu.
to select “Forward”, then press
1. Perform steps 1 and 2 in “Creating a New SMS” on
3. Press
or
.
page 106.
4. Enter the SMS phone number of the recipient, then
press
2. Press
or
.
to select “Inbox” or “Outbox”, then
.
press
For details on searching the Phonebook entries, see
“Finding a Name and Number” on page 27.
3. Select the message you wish to delete by pressing
or , then press
4. Press [Options] to display the Options Menu.
.
5. Press
or
to select “Send”, then press
.
The phone begins the sending process and the SMS
is sent.
5. Press
or
or
to select “Delete”, then press
to select “Yes”, then press
.
6. Press
.
The selected message is deleted.
Messages
108
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing the Phone Number of a Sender in the
Phonebook
Cell Broadcast (M 0-3)
You can receive Cell Broadcast messages or general
messages like weather reports, traffic reports, etc.
broadcast to all subscribers in a certain network area.
107.
This function may not be available on all mobile phone
networks. Contact your network operator for more
information.
2. Press
[Options] to display the Options Menu.
to select “Save to Phonebook”, then
3. Press
or
.
press
Enabling/Disabling Cell Broadcast (M 0-3-1)
4. Enter the name for the phonebook entry.
1. Press
[
] during stand-by.
For details on entering a name, see “Storing Names
and Numbers” on page 25.
Check the already entered phone number.
2. Press
or
to select “Cell Broadcast”, then
press
.
3. Press
or
to select “On/Off”, then press
.
4. Select “On” to set Cell Broadcast on or “Off” to set
it off by pressing or , then press
.
Reading Cell Broadcast Messages (M 0-3-2)
1. When you receive a Cell Broadcast message, press
.
2. Scroll the screen by pressing
or
to read the
message.
3. When you finish viewing, press
.
109
Messages
Download from Www.Somanuals.com. All Manuals Search And Download.
Subscribing to Cell Broadcasts
Select the page of the cell broadcast message that you
want.
Cell Information (M 0-4)
The Cell Information is the message information that
operators sent to subscribers in certain areas.
When you receive Cell Information, the message will
be displayed on the stand-by screen.
1. Press
[
] during stand-by.
2. Press
or
to select “Cell Broadcast”, then
Note
press
.
• This function may not be available on all mobile
phone networks. Contact your network operator for
more information.
3. Press
or
or
to select “Settings”, then press
.
4. Press
to select “Set Info Subjects”, then
press
.
Enabling/Disabling Cell Information
1. Press
[
] during stand-by.
5. Press
or
to select “Create Subject”, then
press
.
2. Press
or
to select “Cell Info”, then press
.
6. Press
to add the channel.
3. Press
or
to select “On” or “Off”, then press
7. Enter the appropriate channel code obtained from
.
your service provider, and a title for the channel.
Note
Setting Languages
Allows you to select your preferred language for the
cell broadcast message display.
• If Cell Information is set to “On”, the Stand-by Time
will decrease.
Messages
110
Download from Www.Somanuals.com. All Manuals Search And Download.
after executing [SHARP GSM GPRS] in the control
panel.
Data Transmission
Your PC can be set up to use the GX1 as a modem. You
2. Install Modem driver.
can use Infrared (IrDA) to connect to the PC.
3. Make the Dial-up connection.
System Requirements
4. Set GSM/GPRS Modem Option which is stored in
®
®
OS:
Windows 98*, Windows Me,
the control panel.
®
®
Windows 2000, Windows XP
If you wish to use GSM, fill the GSM connection
column.
If you wish to use GPRS, fill the GPRS connection
column.
®
®
* Windows 98 Second Edition, or Windows 98 +
Internet Explorer 5.01 or later
Interface: Infrared (IrDA) or Serial port (D-sub 9-pin
connector)
Note
• Modem setup software may not run on certain PCs.
CD-ROM drive
Software Installation and Setup
1. Install Modem setup software from the included
CD-ROM.
Using the Modem Setup
The software in the CD-ROM supplied is provided
based on the END USER LICENSE AGREEMENT,
and can be used and duplicated only in compliance
with the conditions of the pertinent END USER
LICENSE AGREEMENT.
• Insert the CD-ROM and double-click [setup.exe]
to start installation.
• Follow the instructions on the screen to complete
installation.
When installation has completed, “SHARP GSM
GPRS” icon appears in the control panel.
The software installer displays the END USER
LICENSE AGREEMENT upon startup.
When you perform the following operations (step 2
to 4), refer to GSM/GPRS Modem Option Help
111
Data Transmission
Download from Www.Somanuals.com. All Manuals Search And Download.
• When using the infrared modem function for
executing data transmission, align the infrared port
with each other.
Note
• The distance between the infrared ports which can
communicate is a maximum of 20 cm within a 30°
angle.
• When transmitting data via infrared communication,
you need to set the infrared setting to “On”. (p. 89)
• It is not recommended that you make or answer a call
during data transmission. The operation may be
interrupted.
Data Transmission
Download from Www.Somanuals.com. All Manuals Search And Download.
112
Problem
Solution
Troubleshooting
• Check the radio signal
strength indicator as you may
be outside the service area.
• Check to see if any error
message is displayed when
you turn your phone on. If so,
contact your dealer.
Problem
Solution
• Make sure the battery is
properly inserted and
charged.
The phone does not
turn on.
Phone functions do
not work after the
phone is turned on.
• Make sure you have entered
the correct code (4 to 8
digits).
• Your SIM card/protected
functions will become locked
after 3 unsuccessful
attempts.
• Contact your SIM provider if
you do not have the correct
PIN code.
• Make sure the SIM card is
correctly inserted.
• If the message “SIM Card
Error” is displayed at start-up,
you cannot use your SIM card
or SIM card is damaged.
Contact your dealer or
network service provider.
• Check your call barring, fixed
dialling setting, remaining
battery and call forwarding
settings.
• Check if your phone is
currently performing data
communicationusingInfrared
(IrDA).
• Check the remaining balance
if you are using a pre-paid
SIM card.
PIN code or PIN2
code is rejected.
• Enter PUK code (8 digits)
provided by your service
provider (if supported).
• If the attempt is successful,
enter the new PIN code and
confirm your phone is
Calls cannot be
made or received.
SIM card becomes
locked.
operational again. Otherwise
contact your dealer.
The display is diffi-
cult to read.
• Adjust the LCD contrast.
113
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Solution
Problem
Solution
Limited memory
available.
• Your current location may not
provide good call quality (i.e.,
in a car or train). Move to a
location where radio signal
strength is greater.
• Delete any unnecessary data.
Call quality is poor.
• Check where your account
has been registered and
where the service is
available.
Cannot access net-
work service.
• Make sure you are correctly
subscribed for the Short
Message Service, that the
network supports this service,
and that the centre number is
set up correctly. If not, contact
your network service
Cannot send or
receive SMS mes-
sages.
provider.
• MMS settings and
configuration may be missing
or incorrect or network does
not support it. Check your
service provider’s access
point number.
Cannot connect to
MMS service pro-
vider.
Contact your service provider
to confirm the correct
settings.
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
114
• Do not switch on your phone near gas or flammable
substances.
• Observe the rules concerning the use of mobile
phones at gasoline stations, chemical plants and at all
sites where a risk of explosion exists.
Safety Precautions and Condi-
tions of Use
Your phone conforms to international regulations
insofar as it is used under normal conditions and in
accordance with the following instructions.
Caring for your phone
CONDITIONS OF USE
Electromagnetic waves
• Do not allow children to use your phone without
supervision.
• Do not open or attempt to repair your phone yourself.
The product can only be repaired by authorized
service personnel.
• Do not drop your phone or subject it to severe
impacts. Bending the body and pushing the display or
keys with extreme force could damage the phone.
• Do not use solvents to clean your phone. Use only a
soft, dry cloth.
• Do not switch on your phone aboard an aircraft (as
your phone may interfere with the aircraft’s
electronic systems). Current legislation forbids this
use and legal action can be taken against the user.
• Do not switch on your phone in a hospital, except in
designated areas.
• Use of your phone’s function may affect the
performance of medical electronic units
• Do not carry your phone in your back pocket as it
could break when you sit down. The display is made
of glass and is particularly fragile.
• Avoid touching the external connector on the
underside of the phone, since the delicate
components within can be damaged by static
electricity.
(pacemakers, hearing aids, insulin pumps, etc.).
When the phone function is on, do not bring it near
medical equipment or into areas in which medical
equipment is being used. If you have a hearing aid or
a pacemaker, only use the phone on the opposite side
of your body from where it is located. The phone
should be kept at least 6 inches (15.24 cm) from a
pacemaker ANYTIME the phone is switched on.
115
Safety Precautions and Conditions of Use
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery
• The battery can be charged and discharged hundreds
of times but it will eventually wear out. When the
operating time (talk-time and stand-by time) is
noticeably shorter than normal, it is time to buy a new
battery.
• Use your phone only with batteries, chargers and
accessories recommended by the manufacturer. The
manufacturer disclaims any liability for damage
caused by the use of other chargers, batteries or
accessories.
• When the battery charging alert is displayed
on the screen, charge the battery as soon as
possible. If you continue using your phone ignoring
the alert, the phone may cease to function, and all
data and settings you have stored may be lost at any
moment.
• Before removing the battery from the phone, make
sure the phone is switched off.
• Replace and charge the new battery as soon as
possible after removing the old one.
• Do not touch the battery terminals. Batteries can
cause damage, injury or burns if a conductive
material touches exposed terminals. When the battery
is detached from the phone, use a cover made of non-
conductive material for keeping and carrying the
battery safely.
• The battery can only be used and charged in
temperatures between 0°C to 40°C. The battery also
can be preserved in temperatures between -20°C to
45°C.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE,
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
See “Battery Disposal” on page 12.
Camera Operation
• Learn picture quality, file formats, etc. beforehand.
The display supports up to 65,536 colours.
The taken pictures can be saved in the JPEG format
(JPEG high-colour).
• Be careful not to move your hand whilst taking
pictures.
If the phone moves whilst taking a picture, the picture
can be blurred. When taking a picture, hold the phone
firmly to prevent it from moving, or use the delay
timer.
Safety Precautions and Conditions of Use
Download from Www.Somanuals.com. All Manuals Search And Download.
116
• Clean the lens cover before taking a picture.
• Since this product is not waterproof, do not use it or
store it where fluids such as water can splash onto it.
Raindrops, water spray, juice, coffee, steam,
Fingerprints, oils, etc. on the lens cover hinder clear
focusing. Wipe them off with a soft cloth before
taking a picture.
perspiration, etc. will also cause a malfunction.
Others
PRECAUTIONS CONCERNING
• As with any electronic storage unit, data may be lost
VEHICLE USE
or corrupted under various circumstances.
• It is the user’s responsibility to verify if local laws
permit the use of a mobile phone in a vehicle. Give
full attention to driving. Pull off onto the side of a
road and park the car before making or answering a
call.
• Before connecting the phone with a PC or a
peripheral unit, read the operation manual for the
other unit carefully.
• If the phone’s battery has been removed for some
time, or the phone has been reset, the unit’s clock and
calendar may be reinitialised. The date and time
should be updated in this case.
• If local laws permit, we recommend that you use your
phone with the attached hands free.
• Use of your phone’s function may interfere with the
vehicle’s electronic systems, such as the ABS anti-
lock brakes or the air-bag. To ensure no such problem
occurs, please check with your dealer or car
manufacturer before connecting your phone.
• Only allow qualified service maintenance personnel
to install the vehicle accessories.
• Use only the attached hands free kit. Some phone’s
functions may not work when unauthorised hands
free kits are used.
ENVIRONMENT
• Keep your phone away from extreme heat. Do not
leave it on the dashboard of a car or near a heater. Do
not leave it in any place that is extremely damp or
dusty.
The manufacturer disclaims any liability for damage
which may result as a consequence of improper use or
use contrary to the instructions contained herein.
117
Safety Precautions and Conditions of Use
Download from Www.Somanuals.com. All Manuals Search And Download.
SAR
Your Sharp mobile phone has been designed,
manufactured and tested so as not to exceed the limits
for exposure to electromagnetic fields recommended by
the Council of the European Union. These limits are
part of comprehensive guidelines developed by
independent scientific organisations. The guidelines
include a substantial safety margin designed to assure
the safety of the phone user and others and to take into
account variations in age and health, individual
sensitivities and environmental conditions. European
standards provide for the amount of radio frequency
electromagnetic energy absorbed by the body when
using a mobile phone to be measured by reference to
the Specific Absorption Rate (SAR). The SAR limit for
the general public is currently 2 watts per kilogram
averaged over 10 grams of body tissue. Your Sharp
mobile phone SAR value is 0.46 watts per kilogram.
This has been tested to ensure that this limit is not
exceeded even when the phone is operating at its
highest certified power. In use however your Sharp
mobile phone may operate at less than full power
because it is designed to use only sufficient power to
communicate with the network.
Safety Precautions and Conditions of Use
Download from Www.Somanuals.com. All Manuals Search And Download.
118
Index
Call 18
Answering 19
Ending 19
Holding 20
Making 18
Making Another Call During a
Call 20
Rejecting 20
Auto Redial 82
Call Waiting 80
Caller No. Status 80
Display Call Timers 80
Group Call 82
Minute Minder 82
Personal Call 81
Resetting 83
Call Timers 71
Checking Duration of Last Call
71
Checking Total Call Time 71
Call Waiting 21, 80
Camera 9, 33
A
Accessories 7
B
Battery 10
Charging 13
Disposal 12
Inserting 10
Removing 12
Call Costs 72
Battery Level Indicator 14
Bookmarks 96
Accessing 97
Checking Charge Limit 73
Checking Charge Rate 72
Checking Cost of the Last Call
72
Checking Residual Credit 73
Checking Total Call Cost 72
Resetting All Call Timers/Call
Costs 73
Setting Charge Limit 73
Setting Charge Rate 72
Call Manager 70
Call Register 70
Adding 96
Deleting 97
Editing 97
Brightness 35
Deleting 36
Indicators 35
Memory 34
Browser 95
Browser Menu 96
Navigating WAP Page 95
Viewing WAP Browser 95
Mode 34
C
Picture Size 34
Retaking Pictures 34
Sending 36
Taking Pictures 33
Timer 35
Calculator 62
Rate Conversion 62
Calendar 63
Deleting 70
Sending Messages 70
Viewing 70
Deleting Schedules 64
Find a Particular Date 63
Call Settings 80
Viewing 35
119
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Zoom Function 33
Cell Broadcast 109
Enabling/Disabling 109
Reading 109
Setting Languages 110
Subscribing 110
Cell Information 110
Enabling/Disabling 110
Clock & Alarm 64
Data Transmission 111
Modem Setup 111
Software Installation/Setup 111
System Requirements 111
Diverts 74
Cancelling All Divert Settings
75
Cancelling Divert Settings Indi-
vidually 75
G
Games 44
Setting up Game Options 45
Starting 44
H
Hands free Connector 9
Help List 69
I
Image Gallery 37
Adjusting Size 38
Changing File Name 38
Checking 37
Deleting 39
Sending Messages 38
Viewing 37
Indicators 15
Infrared 89
Infrared Port 9
Changing Alarm Settings 68
Disabling Alarm Function 68
Resetting Alarm Setting 68
Resetting All Alarm Settings 68
Setting 66
Setting Alarm 66
Setting the Date and Time 64
Clock Setting 64
Setting Date and Time 64
Conference Call 21
Adding New Participants 21
Ending Call with a Participant
22
Checking the Divert Status 75
Divert Calls 74
E
Earpiece 9
Earpiece Volume 20
Emergency Calls 18
End/Power Key 9
Entering Characters 23
Changing Input Mode 24
Symbols and Punctuation 24
T9 Text Input 24
Table of Characters 23
Text Template 24
External Connector 9
International Calls 18
Internet Settings 85
WAP/MMS Settings 85
Making 21
Private Conversation 22
K
Key Lock 89
L
LED Indicator 9
F
D
Fun & Games 44
Data Counter 74
Resetting 74
Index
120
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Recipients 99
Checking Sender/Receiver Ad-
dress 101
Creating 98
Creating Slide Data 104
Deleting 103
Editing the Preferred List 84
Selecting a Network Automati-
cally 83
M
M Key 9
Master Reset 94
Melody Editor 45
Copying/Pasting Notes 52
Creating Your Original Ringing
Tone 45
O
Organiser 62
P
Forwarding 102
Phone Settings 76
Assign Images 78
Backlight 77
Built-in Animations/Illustra-
tions 76
Changing Language 76
Colour Reduction 78
Greeting Message 78
LCD Contrast 77
Resetting 79
Wallpaper 76
Phonebook 23
Adding Number from Call Reg-
ister 26
Creating New Entry 24
Deleting 28
Inserting Attached Data 100
Lock/Unlock 104
Making a Call 105
Modifying 102
Reading 100
Replying 101
Deleting 50
Editing 50
Musical Scale/Rest 47
Strength 50
Tone 48
Types of Notes/Rests 47
Memory Status 43
Menu 31
List of Menu Functions 31
Main Menu 31
Operation Guidance 31
Shortcut Keys 31
Menu Key 31
Retrieving 103
Saving in Drafts Box 99
Sending Message in Drafts Box
100
Setting up 98
Storing Address in Phonebook
103
My Phone 37
Messages 98
N
MMS 98
SMS 105
Navigation Keys (Arrow Keys) 9,
31
Network Settings 83
Adding New Network 84
Changing Network Password 84
Editing 27
Microphone 9
Muting 22
Mirror 9
Group Name 23, 25
Memory Status 29
Searching 27
MMS 98
121
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending Messages 30
Storing Inputted Number 26
View Groups 28
Your Own Number 28
PIN Code 89
PIN2 Code 91
Profiles 56
Activating 56
Any Key Answer 61
Customising 56
Keypad Tones 58
Low Battery Alert 61
Message Alert 60
Power On/Off Sound 59
Resetting 57
Ringer Type 57
Ringer Volume 57
Vibration 58
Screen Display 9
Security 89
Replying 107
Saving in Outbox 107
Sending 107
Call Barring 91
Changing Handset Code 90
Changing PIN Code 90
Changing PIN2 Code 91
Enabling/Disabling PIN Code
89
Fixed Dialling No. 92
Handset Lock 90
Key Lock 89
Settings 76
Call Settings 80
Infrared 89
Network Settings 83
Phone Settings 76
Security 89
SIM Card 10
Inserting 10
Removing 12
SMS 105
Calling 108
Creating 106
Deleting 108
Setting up 105
Storing Sender’s Number in
Phonebook 109
Sound Gallery 39
Changing File Name 40
Checking 40
Deleting 41
Playing Back 39
Sending Messages 41
Strength 40
Tone 40
Speaker 9
Speed Dialling 18, 29
T
Text Templates 42
Adding Phrases 42
Deleting 42
Editing 42
Using 99, 106
Viewing 42
Tone Editor 52
Algorithm 53
Creating Your Original Tone 54
Effect Frequency 54
Warning Tone 59
Q
Quick Reference 124
R
Redialling 19
Auto Redial 19
Forwarding 108
Modifying 108
Reading 107
S
SAR 118
Index
122
Download from Www.Somanuals.com. All Manuals Search And Download.
FM Sound Source 52
Operator 53
Troubleshooting 113
Turning Your Phone On/Off 14
V
Voice Memo 68
Playing Back 69
Recording 68
123
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigating Menus
Messages
Quick Reference
GX1
Press
to display the Main Menu.
Scroll up
Press
Press
Press
[
or
]
during stand-by.
to scroll.
Function Key shortcuts
MMS
Scroll down
Compose
Inbox
Sent
Drafts
Settings
To display the Main
Menu.
Basic Operation
On/Off
Press and hold
Enter number.
.
To lock and unlock
the keypad.
Make a call
Press
Press
Press
.
.
.
Answer a call
End a call
To mute and unmute
the microphone
during call.
[Mute]
SMS
Phonebook
Storing name and number
,select "Add New Name".
Compose
Inbox
Outbox
Settings
1.Press
To turn Silent mode on.
2.Enter name, press
3.Enter number, press
.
.
4.Select number type, press
.
Special Features
Camera
Press
,
and
.
Cell Broadcast
To adjust earpiece
volume.
Taking Pictures
On/Off
1.Press and hold
for approximately 2
Read Messages
Settings
seconds.
2.Press
1.Press
to take picture.
To display:
MMS
Individual Call Timer
Cell Info
[
].
Select "Last Call"
Select "Clear Timers"
Select "All Calls"
On
Off
2.Select "MMS", press
.
Resettable Call Timer
Cumulative Call Timer
3.Select "Compose",press
4.Enter your message, press
.
.
Voicemail
5.Enter phone number or E-mail address,
press
6.Select "Send", press
.
Get Voicemail
.
Voicemail Settings
Quick Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
124
Press
during stand-by mode.
Press or to scroll and press
to access function.
Camera
My Phone
Fun & Games
Profiles
1 Normal
2 Meeting
3 Activity
4 Car
Organiser
1 Image Gallery
2 Sound Gallery
3 Text Templates
4 Memory Status
1 Games
2 Melody Editor
3 Tone Editor
1 Calculator
2 Calendar
3 Clock & Alarm
4 Voice Memo
5 Help List
5 Silent
Messages
Info-Service
Browser
Settings
Call Manager
(Depends on the
contents of SIM
card.)
1 MMS
2 SMS
3 Cell Broadcast
4 Cell Info
5 Voicemail
1 Homepage
2 Bookmarks
1 Phone Settings
2 Call Settings
1 Phonebook
2 Call Register
3 Diverts
3
4
Network Settings
Internet Settings
5 Infrared
6 Security
7 Master Reset
125
Quick Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigation in den Menüs
Drücken, um das Hauptmenü aufzurufen.
Nachrichten
Kurzanleitung
GX1
[
] im Standby drücken
zum Blättern drücken
Nach oben
oder
drücken
Tastenkombinationen
MMS
SMS
Nach unten
Schreiben
Eingang
Gesendet
Entwürfe
Einstellungen
Grundlegende Aktionen
Hauptmenü aufrufen
Ein/Aus
gedrückt halten
Nummer eingeben,
drücken
Tastatur sperren/
entsperren
Anruf tätigen
Gespräch entgegennehmen
Gespräch beenden
drücken
drücken
Mikrofon während
eines Gespräches auf
stumm/laut schalten
Telefonbuch
Name und Nummer speichern
1. drücken, „Neuen Namen hinzufügen“ wählen
2.Name eingeben,
3.Nummer eingeben, drücken
4.Nummernart wählen, drücken
[Stumm]
Schreiben
Eingang
Ausgang
Modus „Lautlos“
anschalten
drücken
Spezielle Funktione
Einstellungen
Kamera
Cell Broadcast
und
drücken
,
Hörerlautstärke
einstellen
Bilder aufnehmen
ca. 2 Sek. gedrückt halten
Ein/Aus
Nachrichten lesen
1.
2.
drücken, um Bild aufzunehmen
Zum Anzeigen von:
Gesprächsdauer
Einstellungen
MMS
Zelleninfo
1.
[
] drücken
„Letzter Anruf“ wählen
„Zähler löschen“ wählen
„Alle Anrufe“ wählen
2. „MMS“ wählen,
drücken
Ein
Aus
Gesprächsdauer
zurücksetzen
3. „Schreiben“ wählen, drücken
4. Nachricht eingeben, drücken
5. Rufnummer oder E-Mail-Adresse
eingeben, drücken
Voicemail
Gesamtgesprächsdauer
Voicemail abrufen
Voicemail-Einstellungen
6. „Senden“ wählen, drücken
Quick Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
126
im Standby drücken
oder zum Blättern und
zum Funktionsaufruf drücken
Kamera
Mein Telefon
Spiel & Spaß
Profile
1 Normal
2 Besprechung
3 Aktiv
Organizer
1 Rechner
2 Kalender
3 Uhr & Alarm
4 Voice Memo
5 Hilfe
1 Bildgalerie
2 Tongalerie
3 Textvorlagen
4 Speicherstatus
1 Spiele
Melodieneditor
3 Toneditor
2
4 Kfz
5 Lautlos
Nachrichten
Info-Services
Browser
Einstellungen
Anrufmanager
(Je nach Inhalt
der SIM-Karte)
1 MMS
2 SMS
1 Homepage
2 Lesezeichen
1
2
3
4
Telefoneinstellungen
Anrufeinstellungen
Netzwerkeinstellungen
Interneteinstellungen
1 Telefonbuch
2 Anrufregister
3 Umleitungen
3
Cell Broadcast
4 Zelleninfo
5 Voicemail
5 Infrarot
6 Sicherheit
7
Reset
Werkseinstellungen
127
Quick Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigatiemenu's
om het hoofdmenu op te roepen.
Berichten
Beknopt overzicht
GX1
Druk op
Druk tijdens standby op
[
].
Omhoog schuiven
Druk op
Druk op
of
.
om de tekst te verschuiven.
Sneltoetsen
Om het hoofdmenu
op te roepen.
MMS
Omlaag schuiven
Opstellen
Meest voorkomende bedieningsfuncties
Aan/Uit
Bellen
Een oproep beantwoorden Druk op
Postvak IN
Postvak UIT
Concepten
Instellingen
Houd
ingedrukt.
Vergrendelen en
ontgrendelen van de
toetsen.
Voer nummer in en druk op
.
.
.
Een gesprek beëindigen Druk op
Om tijdens een gesprek
de microfoon te dempen of
de demping op te heffen.
Telefoonboek
SMS
[Dempen]
Naam en nummer opslaan
, selecteer “Voeg nieuwe naam toe”.
Opstellen
Postvak IN
Verstuurd
Instellingen
1.Druk op
2.Voer naam in, en druk op
3.Voer nummer in en druk op
4.Selecteer nummertype en druk op
.
Om de stille modus in
te schakelen.
.
.
Speciale functies
Camera
Cell Broadcast
Druk op
gebruik dan
.
en
Foto's nemen
ongeveer 2 seconden ingedrukt.
Om het volume van het
luistergedeelte in te
stellen.
Aan/Uit
Bericht lezen
Instellingen
1.Houd
,
2.Druk op
om de foto te nemen.
Voor weergave van:
MMS
Celinfo
Afzonderlijke
gesprekstellers
1.Druk op
[
].
Aan
Uit
Selecteer “Laatste gesprek”
Selecteer “Timers wissen”
Selecteer “Alle gesprekken”
2.Selecteer “MMS” en druk op
3.Selecteer “Opstellen” en druk op
4.Voer uw bericht in en druk op
5.Voer het telefoonnummer of e-mailadres
in, en druk op
6.Selecteer “Verzenden” en druk op
.
.
Resetbare
gesprekstellers
.
Voicemail
Voicemail ophalen
Voicemail-instellingen
Gesprekstellers
in totaal
.
.
Quick Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
128
Druk tijdens de standby-modus op
.
Druk op of om te verschuiven en
druk op
om de functie te openen.
Camera
Mijn Telefoon
Spelletjes
1 Spelletjes
2 Ringtone-editor
3 Toon-editor
Profielen
Organiser
1
Afbeeldingsgalerie
2 Geluidsgalerie
3 Tekstvoorbeelden
1 Normaal
2 Vergadering
3 Actief
1
Rekenmachine
2 Kalender
3 Klok & Alarm
4
Geheugenstatus
4 Auto
4
Memo Recorder
5 Help
5 Stil
Berichten
Infoservices
Browser
Instellingen
Gespreksbeheer
(Hangt af van de
inhoud van de
SIM-kaart.)
1 MMS
2 SMS
3 Cell Broadcast
4 Celinfo
5 Voicemail
1 Homepage
2 Bladwijzers
1
2
3
4
5
Telefooninstellingen
Oproepinstellingen
Netwerkinstellingen
Internet instellingen
Infrarood verbinding
1 Telefoonboek
2
Gespreksoverzicht
3 Omleidingen
6 Beveiliging
7
Fabrieksinstellingen
129
Quick Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
SHARP CORPORATION
TINSE1660AFZZ
2
02K 31.0 YM TK (E)
Download from Www.Somanuals.com. All Manuals Search And Download.
|
