Sharp Car Satellite TV System LC 60LE360X User Manual

MODEL  
LC-60LE360X  
LC-70LE360X  
LED BACKLIGHT TV  
OPERATION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dear SHARP customer  
Important Safety Precautions  
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many  
years of trouble-free operation of your product, please read the Important Safety Precautions  
carefully before using this product.  
• Stand base must be attached to prevent the TV set from falling down and cause injuries.  
• Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the product.  
Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the product.  
• Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming  
pool and in a wet basement.  
• Do not place vases or any other water-filled containers on this product.  
The water may spill onto the product causing fire or electric shock.  
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall, resulting  
in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended  
by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s  
instructions. Use only the mounting hardware recommended by the manufacturer.  
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and uneven  
floor surface can cause the product to fall from the cart.  
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and  
openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product  
on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed for built-in  
installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or  
the manufacturer’s instructions are followed.  
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a  
sharp object. If the LCD panel is broken, be careful not to be injured by broken glass.  
• Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating  
products (including amplifiers).  
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.  
Contents  
Page  
Page  
Audio menu....................................................................... 7  
Dear SHARP customer...................................................... 1  
Supplied accessories........................................................ 1  
Important Safety Precautions .......................................... 1  
Trademarks........................................................................ 2  
Quick Reference................................................................ 2  
Attaching the stand........................................................... 2  
Preparation ........................................................................ 3  
Antenna connection .......................................................... 3  
Connecting external devices.............................................. 3  
Part names and functions................................................. 4  
Remote control unit........................................................... 4  
TV (Front) .......................................................................... 4  
TV (Rear)........................................................................... 5  
Watching TV....................................................................... 5  
Turning the TV on/off......................................................... 5  
Initial auto installation......................................................... 5  
Checking Signal information.............................................. 5  
Auto installation................................................................. 5  
Programme setup ............................................................. 6  
On-Screen Display Menu.................................................. 6  
Selecting a preset AV mode.............................................. 6  
Menu operation................................................................. 6  
Picture menu..................................................................... 7  
ECO menu........................................................................ 7  
Setup menu ...................................................................... 7  
Option menu..................................................................... 9  
Direct Button Operation .............................................. 10  
Programme Guide........................................................... 10  
Info ................................................................................. 10  
ATV/DTV/RADIO buttons ................................................ 10  
Switching the analogue audio format............................... 11  
EPG................................................................................ 11  
Colour adjustment and still image.................................... 12  
ECO mode...................................................................... 12  
Using a Smartphone with the TV ................................... 12  
Teletext function.............................................................. 12  
Using a PC........................................................................ 13  
PC compatibility chart ..................................................... 13  
PC Control of the TV....................................................... 13  
RS-232C commands list................................................. 13  
USB Media Player............................................................ 14  
Appendix .......................................................................... 15  
Specifications .................................................................. 16  
Protection against overturning ...................................... 16  
Dimensional drawings..................................................... 17  
CLEARING THE PASSWORD.......................................... 17  
• To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items.  
• Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take special  
care near children and pets.  
• The LCD panel is a very high technology product with 2,073,600 pixels, giving you fine picture details.  
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of blue,  
green or red.  
This is within product specifications and does not constitute a fault.  
• Precautions when transporting the TV  
When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry the  
TV by two people holding it with two hands — one hand on each side of the TV.  
NOTE  
• The illustration and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the  
actual operation.  
• Some features differ depending on the selected country.  
• Do not display a still picture for a long time, as this could cause an afterimage to remain.  
• Install the product on the place where the AC cord can be unplugged easily from the AC outlet or from the AC INPUT terminal  
on the rear of the product.  
• If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries,  
particularly to children, can be avoided by taking simple precautions such as:  
Using cabinets or stands recommended by the manufacturer of the television.  
Only using furniture that can safely support the television.  
Ensuring the television is not overhanging the edge of the supporting furniture.  
Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and  
the television to a suitable support.  
Supplied accessories  
Remote control unit  
Operation manual  
“AAA” size battery ( 2)  
g
Not standing the televisions on cloth or other materials placed between the television and supporting furniture.  
Educating children about the dangers of climbing on furniture to reach the television or its controls.  
Stand unit  
Support angle  
Stand base  
Screws ( 10)  
g
-
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Trademarks  
Quick Reference  
Push the support angle follow the direction of the arrow mark on the stand base.  
Make sure the hook is locked securely and the support angle cannot be pull out.  
3
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered  
trademarks of HDMI Licensing LLC in the United States and other countries.  
Push  
• TruSurround HD, SRS and the  
symbol are trademarks of SRS Labs, Inc.  
TruSurround HD technology is incorporated under license from SRS Labs, Inc.  
• SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with  
rich bass, high frequency detail and clear dialog.  
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby  
Laboratories.  
Make sure the hook is locked  
securely  
Push the support angle follow  
the direction of the arrow mark  
• DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under  
license.  
• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an  
official DivX Certified® device that has passed rigorous testing to verify that it plays DivX video. Visit divx.com for more  
information and software tools to convert your files into DivX videos.  
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-  
on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to  
vod.divx.com for more information on how to complete your registration.  
For easily, user can use polystyrene foam as a jig to hold the stand base when fixing the screws. (  
)
2
4
Example for left side  
2
2
• MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or registered trademarks of MHL, LLC in the United  
States and other countries.  
Polystyrene foam  
Insert the stand into the openings on the bottom of the TV. (  
)
5
6
3
Quick Reference  
Insert and tighten the screws into the holes on the rear of the TV. (  
)
4
Soft cushion  
Attaching the stand  
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.  
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.  
I
USB  
1
DC5V 1.5A  
H
Confirm the screws supplied with the TV.  
MHL  
DMI  
2
2
1
4
(DC5V 900mA)  
OUTPUT  
DIGITAL  
AUDIO  
OUTPUT  
5
AUDIO(  
L/R)  
HDMI  
1
1
8
ARC  
HDMI  
3
A
U
D
I
O
I
N
3
PC  
8
R
S
-
2
3
2
C
I
O
I
O
I
ANALOGUE  
RGB (PC)  
INPUT  
COMPONENT/A  
AUDIO  
VIDEO/Y  
6
6
V
INPUT  
B(CB P  
R(CR)  
R
-
-
L
P
)
R
-
AUDIO  
-
L
R
-
AUDIO  
INT  
-
L
VIDEO  
7
Screws ( 10)  
A
U
D
I
O
O
U
T
m
USB  
2
HI  
5
5
4
HDMI  
4
OUTPUT  
DC5V 1.5A  
D
C
5
V
0
.
5
A
Insert the support angle into the stand base slot holes. (  
)
2
1
• Please make sure left support angle into the left stand base and right support angle into the right stand base  
(left side part engraved “L”, right side part engraved “R”).  
3
NOTE  
• To detach the stand, perform the steps in reverse order.  
• Refer “Building the Work Table” in carton box to assemble the TV.  
CAUTION  
• Do not attach or detach the stand without holding it.  
Doing so can cause the stand to fall, resulting in serious personal injuries as well as damage to the stand.  
• The illustrations used throughout this manual are based on LC-60LE360X.  
-
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
Connecting a DVD player/Digital TV STB (Set Top Box)  
Antenna connection  
You can use the INPUT 1 (HDMI/ARC)/INPUT 2 (HDMI/MHL)/INPUT 3 (HDMI)/INPUT 4 (HDMI)/INPUT 5 (HDMI)  
or INPUT 6 terminals when connecting to a DVD player/Digital TV STB (Set Top Box) and other audiovisual  
equipment.  
Connect antenna cable to the antenna terminal  
When using HDMI-certified cable (commercially  
available)  
When using component cable (commercially  
available)  
or  
DVD player/  
Digital TV STB  
(Set Top Box)  
DVD player/  
Digital TV STB  
(Set Top Box)  
6
C.I.  
INPUT  
6
5
USB  
1
HDMI  
5
D
C
5
V
1
.
5
A
MHL  
HDMI  
2
2
COMPONENT/AV INPUT  
- AUDIO  
B(CB  
PR(CR)  
DIGITAL  
AUDIO  
OUTPUT  
(5V 900mA)  
OUTPUT  
HDMI  
1
1
5
8
ARC  
AUDIO(L/R)  
R
-
L
P
)
VIDEO/Y  
PC  
8
R
S
-
2
3
A
U
D
I
O
I
N
2
C
I
O
I
O
I
ANALOGUE  
RGB (PC)  
HDMI  
3
3
INPUT  
COMPONENT/A  
AUDIO  
6
6
R
-
-
L
VIDEO/Y  
V
P
INPU  
T
B(CB)  
P
R
(
C
R
R
-
AUDIO  
-
L
R
-
AUDIO  
INPUT  
-
L
VIDEO  
A
U
D
I
O
O
U
T
7
7
USB  
2
HDMI  
5
5
HDMI  
4
4
OUTPUT  
DC5V 1.5A  
D
C
5
V
0
.
5
A
If your outdoor antenna uses a 75-ohm coaxial cable  
with a standard DIN45325 plug (IEC 169-2), plug it into  
the antenna jack at the rear of the set.  
If your outdoor antenna uses a 300-ohm twin-lead flat  
feeder, connect a 300-ohm to 75-ohm impedance  
converter and plug it into the antenna jack at the rear of  
the set.  
Connecting a PC  
You can use the INPUT 8 PC terminals when  
connecting to a PC of ANALOGUE RGB terminal.  
You can use the INPUT 5 (HDMI) terminal when  
connecting to a PC of DIGITAL DVI terminal.  
CAUTION  
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE  
AC CORD CONNECTED.  
ANALOGUE RGB  
DIGITAL DVI  
5
8
NOTE  
AUDIO IN  
I
5
8
USB  
1
V
HL  
HDMI  
2
2
1
DIGITAL  
AUDIO  
• Place the TV close to the AC outlet, and keep the power plug within reach.  
HDMI  
1
OUTPUT  
(DC5V 900mA)  
OUTPUT  
HDMI  
1
1
5
8
ARC  
AUDI  
O(L/R)  
8
S
3
A
U
D
I
O
I
N
C
I
O
I
O
I
ANALOGUE  
RGB (PC)  
HDMI  
3
3
ANALOGUE  
INPUT  
6
6
COMPONENT/A  
V
INPUT  
PR(CR  
)
R
-
AUDIO  
-
L
VIDEO/Y  
P
B(CB  
)
ARC  
R AUDIO  
AUDIO OUT  
-
-
L
R
-
AUDIO IN  
AUDIO  
INPUT  
-
L
VIDEO  
7
5
7
HDMI  
5
USB  
2
HDMI  
5
5
HDMI  
4
4
PC  
RS-232C IOIOI  
OUTPUT  
DC5V 1.5A  
D
C
5
V
0
.
5
A
ANALOGUE  
RGB (PC)  
Connecting external devices  
PC  
PC  
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD  
player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from  
INPUT on the remote control unit or INPUT on the TV.  
Connecting a USB device  
Using Digital Audio Output  
CAUTION  
Connect a USB device to the TV.  
It is possible to output audio through the DIGITAL  
AUDIO OUTPUT terminal. PCM audio outputs from  
the terminal.  
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital  
TV STB (Set Top Box), PC or other external equipment.  
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.  
USB  
1
Connecting a VCR, game console or camcorder  
C.I.  
Optical fibre cable  
(commercially available)  
USB  
1
D
C
5
V
1
.
5
A
MHL  
HDMI  
2
2
DIGITAL  
AUDIO  
OUTPUT  
(DC5V 900mA)  
OUTPUT  
HDMI  
1
1
5
DC5V 1.5A  
8
ARC  
AUDIO(  
L/R)  
PC  
8
R
S
-
2
3
A
U
D
I
O
I
N
2
C
I
I
ANALOGUE  
RGB (PC)  
HDMI  
3
3
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected  
using the INPUT 6 or INPUT 7 terminals.  
INPUT  
COMPONENT/A  
AUDIO  
6
6
R
-
-
L
VIDEO/Y  
V
P
INPU  
T
B(CB)  
P
R
(
C
R
R AUDIO  
AUDIO OUT  
-
-
L
R
-
AUDIO  
INPUT  
-
L
VIDEO  
7
7
DIGITAL  
AUDIO  
OUTPUT  
USB  
2
HDMI  
5
5
HDM  
I
4
4
OUTPUT  
DC5V 1.5A  
D
C
5
V
0
.
5
A
When using component cable (commercially  
available)  
When using composite cable (commercially  
available)  
To optical digital input of  
external audio devices  
6
INPUT  
6
COMPONENT/AV INPUT  
AUDIO VIDEO/Y B(CB R(CR)  
P
R
-
-
L
P
)
CAUTION  
C.I.  
6
VCR/Game  
console/  
Camcorder  
INPUT 6  
VCR/Game  
console/  
Camcorder  
S
D
C
5
V
MHL  
HDMI  
2
2
• Do not disconnect a USB device from the TV while transferring files, when a screen is in “USB” mode.  
DIGITAL  
AUDIO  
OUTPUT  
(DC5V 900mA)  
OUTPUT  
COMPONENT/AV INPUT  
HDMI  
1
1
5
8
ARC  
AUDIO  
(L/R)  
PC  
8
-
A
U
D
I
O
I
N
3
2
C
I
O
I
O
I
ANALOGUE  
RGB (P  
HDMI  
3
C)  
3
P
R(CR  
)
or  
R - AUDIO - L VIDEO/Y  
P
B(CB  
)
INPUT  
COMPONENT/A  
6
6
R
-
AUDIO  
-
L
VIDEO/Y  
V
P
IN  
PUT  
B(CB  
)
PR(CR  
)
R
-
AUDIO  
-
L
R
-
AUDIO  
INPUT  
-
L
VIDEO  
A
U
D
I
O
O
U
T
7
7
USB  
2
HDMI  
5
5
HDM  
I
4
4
OUTPUT  
DC5V 1.5A  
NOTE  
D
C
5
V
0
.
5
A
R
-
AUDIO  
INPUT  
-
L
VIDEO  
7
7
• The DIGITAL AUDIO OUTPUT terminal usually outputs the same audio from the speakers. (The audio of the content you are  
viewing is output from the terminal.)  
• The DIGITAL AUDIO OUTPUT terminal does not output some signals, depending on devices and software.  
• The illustrations used throughout this manual are based on LC-60LE360X.  
-
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part names and functions  
Inserting the batteries  
Remote control unit  
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become  
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.  
a
c d  
(Cursor)  
9
/
/
/
b
12  
13  
1
2
3
Select a desired item on the setting screen.  
ENTER  
Execute a command.  
HDMI  
Open the battery cover.  
Insert the two supplied “AAA” size batteries.  
Close the battery cover.  
1
2
3
14  
10 ATV/DTV  
Press to access analogue and digital TV mode.  
4
(See page 10.)  
11 Colour (Red/Green/Yellow/Blue)  
The coloured buttons are correspondingly used to select  
the coloured items on the screen.  
5
6
15  
DISPLAY  
• Place batteries with their terminals corresponding to the  
) and ( ) indications in the battery compartment.  
16  
17  
18  
7
TELETEXT mode: Select a page. (See page 12.)  
12 ECO  
Reduce overall power consumption based on user  
preferences. (See page 12.)  
13 COLOUR ADJ. (FREEZE)  
(
e
f
CAUTION  
8
9
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.  
ATV/DTV  
Freeze a motion picture on the screen and adjust the  
colour tone of the still image. (See page 12.)  
14 PHOTO  
Display your pictures directly on the TV screen.  
(See page 14.)  
15 INPUT (INPUT SOURCE)  
10  
19  
TV (Front)  
11  
20  
21  
EPG  
GUIDE  
INFO  
RADIO  
Select an input source.  
r
s
16 CH /CH  
TV input mode: Select the channel.  
1
2
POWER (STANDBY/ON)  
To switch the power on and off. (See page 5.)  
SLEEP  
r
s
(CH ) Increase the channel number.  
(CH ) Decrease the channel number.  
TELETEXT mode: Select a page. (See page 12.)  
17 MENU  
Display the menu screen.  
18 MPX  
Select the sound multiplex mode.  
19 RETURN  
MENU mode: Return to the previous menu screen.  
Set the Sleep timer.  
0 hr. 30 min.  
1 hr. 00 min.  
1 hr. 30 min.  
2 hr. 00 min.  
Off  
2 hr. 30 min.  
3
4
HDMI  
Select the HDMI input mode.  
0 – 9  
Set the channel.  
TELETEXT mode: Set the page. (See page 12.)  
m
3
k
20  
(TELETEXT),  
(Reveal hidden for TELETEXT),  
[
(Hold),  
(SUBTITLE for TELETEXT)  
A
5
(Flashback)  
A
Use for TELETEXT mode. (See page 12.)  
21 EPG  
DTV mode: To display EPG (Electronic Programme Guide)  
screen. (See pages 11 to 12.)  
GUIDE  
DTV mode: Display the programme channel list.  
(See page 10.)  
INFO  
Press  
to return to the previous selected channel or  
external input mode.  
DISPLAY  
Display the channel or input information.  
6
7
k
l
VOL /VOL  
Set the volume.  
(VOL  
(VOL  
e
)
)
Increase the volume.  
Decrease the volume.  
k
l
DTV mode: Display the programme information.  
(See page 10.)  
RADIO  
8
(Mute)  
e s  
e
POWER indicator  
Press  
Press  
Mutes sound.  
Light off  
Power off.  
s
again  
Restores sound.  
Press to access RADIO mode. (See page 10.)  
Lighted (Red)  
Lighted (Green)  
The TV is in standby mode.  
The TV is on.  
Mute will be cancelled after 30 minutes. However, the TV  
will not suddenly output loud sound as the volume level  
will be set to 0 automatically. Increase the volume level by  
pressing VOL  
.
k
• The illustrations used throughout this manual are based on LC-60LE360X.  
-
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part names and functions  
TV (Rear)  
Watching TV  
Turning the TV on/off  
Checking Signal information  
If you install a DVB-T2 antenna for the first time or  
relocate it, you should adjust the alignment of the  
antenna to receive a good reception while checking  
the antenna setup screen.  
Turning on/off the power  
1
2
• To turn on the power  
Press POWER on the TV. (After a few seconds, an image  
appears with sound.)  
C.I.  
6
18  
19  
3
4
• To turn off the power  
Switch it off by pressing POWER on the TV.  
USB  
1
Standby mode  
7
8
DC5V 1.5A  
ATV/DTV  
DIGITAL  
5
• To standby mode  
If the TV is switched on, you can switch it to standby by  
pressing POWER on the remote control.  
AUDIO  
HDMI  
2
2
15  
MHL  
OUTPUT  
1
ARC  
HDMI  
1
16  
Press MENU and the MENU screen displays.  
(DC5V 900mA)  
OUTPUT  
1
2
3
AUDIO IN  
• Switching on from standby  
From standby, press POWER on the remote control.  
PC  
RS-232C IOIOI  
ANALOGUE  
RGB (PC)  
23  
c d  
/
Press  
to select “  
” (Programme setup).  
9
17  
6
AUDIO(L/R)  
INPUT  
6
NOTE  
V
INPUT  
COMPONENT/A  
B(CB  
)
P
R(C  
R
)
P
R
R
- AUDIO  
-
L
VIDEO/Y  
a
/
HDMI  
3
Press  
to select “Digital setting”, and then  
b
3
5
4
• If you are not going to use this TV for a long period of time,  
be sure to remove the AC cord from the AC outlet.  
• Minor power is consumed when the unit is in standby  
mode.  
HDMI  
4
USB  
2
HDMI  
5
press ENTER.  
OUTPUT  
DC5V 1.5A  
10  
R
- AUDIO  
INPUT  
-
L
VIDEO  
7
- AUDIO  
-
L
7
AUDIO OUT  
a
Press  
/
b
to select “Signal information”, and  
DC5V 0.5A  
4
CAUTION  
Product with the  
following thickness for  
optimal connection to  
HDMI cable/ UBS device.  
Use  
a
then press ENTER.  
• The “Signal information” screen will appear.  
20  
21  
22  
14  
13  
12  
11  
Initial auto installation  
Auto installation  
When the TV powers on for the first time after  
purchase, the initial auto installation wizard appears.  
Follow the menu and make the necessary settings  
one after another.  
You can run auto installation again, even after setting  
up the preset channels.  
1
POWER (On/Off) button  
MENU button  
INPUT button  
12 INPUT 4 (HDMI) terminal  
13 INPUT 5 (HDMI) terminal*3  
14 USB 2 terminal  
15 DIGITAL AUDIO OUTPUT terminal  
16 INPUT 1 (HDMI/ARC) terminal  
17 INPUT 8 terminal*3  
Press MENU and the MENU screen displays.  
1
2
3
2
3
4
5
6
7
8
9
Press POWER on the TV.  
1
• The initial auto installation wizard appears.  
c d  
/
Press  
to select “  
” (Programme setup).  
Channel up (r)/ down (s) buttons  
a
Press  
/
to select your country channels listed  
2
b
Volume up ( ) /down ( ) buttons  
+
-
a
Press  
/
to select “Auto installation”, and then  
b
on the screen, and then press ENTER.  
C.I. (COMMON INTERFACE) slot*1  
USB 1 terminal  
press ENTER.  
a
Press  
/
to select the desired language, and  
b
18 AUDIO IN terminal  
If you have already set the password, enter it here.  
• See page 7 for setting a password.  
then press ENTER.  
INPUT 2 (HDMI/MHL) terminal  
19 Antenna input terminal  
20 AUDIO OUT terminals  
21 INPUT 7 terminals  
22 INPUT 6 terminals  
23 RS-232C terminal  
a
Press  
/
to select “HOME” or “STORE”, and  
b
Headphone jack ( 3.5 mm)  
• The speakers do not output volume when  
headphones are plugged in.  
then press ENTER.  
a
Press  
/
to select your country channels listed  
4
b
HOME:  
on the screen, and then press ENTER.  
• “STANDARD” will be the default value for the “AV mode”  
setting.  
a
Press  
/
to select the desired language, and  
b
10 INPUT 3 (HDMI) terminal  
11 OUTPUT terminal (For power output only)*2  
then press ENTER.  
STORE:  
a
*
Press  
/
to select “DTV”, “ATV” or  
b
• “DYNAMIC (FIXED)” will be the default value for the  
“AV mode” setting. If the “AV mode” is changed, the TV  
will automatically switch back to “DYNAMIC (FIXED)”  
when there is no further change to TV setting for 30  
minutes.  
“DTV + ATV”, and then press ENTER.  
1
*
*
*
This function applicable for certain countries only.  
This terminal can supply power for dongles. (Availability is depend on the specification of dongle).  
The INPUT 5 and INPUT 8 terminals can both use the same analogue audio input terminal. However, the proper item must  
be selected in the “Audio select” menu. (See page 9.)  
You do not need to do anything during the auto  
search. Press MENU to exit.  
2
3
*
• The confirmation screen appears only when selecting  
NOTE  
a
“STORE”. Press  
/
to select “Yes” or “No”.  
b
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.  
• The illustrations used throughout this manual are based on LC-60LE360X.  
• In the setting of some country, selecting of “DTV”, “ATV” or  
“DTV + ATV” may not be shown.  
• A region or service selection screen may display depending  
on the country settings or cable providers selections. Follow  
the screen prompts to make the selections.  
• To change the STORE mode to HOME mode, please  
refer to page 9 to reset the unit.  
a
* Press  
/
to select “DTV”, “ATV” or  
b
“DTV + ATV”, and then press ENTER.  
• Auto installation will be executed.  
• You do not need to do anything during the auto search.  
• If you select “Others” country, some of DTV channel  
may not tune properly.  
-
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
On-Screen Display Menu  
H
H
Manual adjust  
Programme edit  
Programme setup  
Selecting a preset AV mode  
You can set some channel items manually.  
Use this menu to set up a channel individually.  
Repeat steps 1 to 3 in Auto search.  
Repeat steps 1 to 3 in Auto search.  
1
2
1
2
“AV mode” gives you several viewing options to  
choose from to best match the system environment,  
which can vary due to factors like room-brightness,  
type of programme watched or the type of image  
input from external equipment.  
Digital setting  
a
a
t
Press  
/
o select “Manual adjust”, and then  
Press  
/
b
to select “Programme edit”, and then  
b
You can reconfigure DTV services settings  
automatically or manually.  
press ENTER.  
press ENTER.  
a
c d  
/
a
/
Press  
press  
/
to select your desired item, and then  
to adjust the settings.  
Press  
to select the channel you want to  
3
b
3
b
Press MENU and the MENU screen displays.  
1
edit, and then press 1 to 5 on the remote control  
Press MENU and the MENU screen displays.  
1
if necessary or press RETURN to exit.  
• As you toggle down the channels, each channel is  
immediately reflected in the background when you press  
ENTER.  
c d  
Press  
/
to select “  
” (Programme setup).  
2
3
Item  
Description  
c d  
(Audio).  
2 Press  
/
to select “  
” (Picture) and “  
a
Press  
/
to select “Digital setting”, and  
b
Storage to  
[1~99]  
Save programme to your desired  
channel number. Press R to save.  
then press ENTER. If you have already set the  
password, enter it here.  
Erase programme)  
(
1
a
ENTER.  
Press  
/
to select “AV mode”, and then press  
3
b
Sound system  
Select the optimum sound system  
(Broadcasting system) to receive.  
(B/G, D/K, I, M)  
• See page 7 for setting a password.  
Channels can be erased individually.  
Press 1 to erase the selected channel.  
a
Press  
/
to select the desired menu item, and  
4
b
Selected item  
Description  
then press ENTER.  
(Label)  
2
Colour system  
Current CH  
Select the optimum colour system to  
receive. (PAL, SECAM, NTSC)  
STANDARD  
For a highly defined image in a normally  
bright room.  
You can change channel names individually.  
Maximum 5 alphanumerics can be input.  
Press 2 to start labelling.  
H
Auto search  
Select the channel you want to edit.  
MOVIE  
PC  
For a movie.  
Use this menu to add new services automatically  
after auto installation has been completed.  
Selected channel will be automatically  
reflected in the background.  
a
c d  
Press  
/
/
2
/
to select a character, and  
b
For PC (Available only when inputting  
an HDMI or PC signal).  
then press  
again or ENTER to save.  
Search  
Fine-tune  
NOTE  
Start searching from current channel.  
NOTE  
c d  
/
3
Instead of pressing  
to adjust the  
(Sort)  
DYNAMIC  
For a clear-cut image emphasising high  
contrast for sports viewing.  
• A region or service selection screen may display depending  
on the country settings or cable providers selections. Follow  
the screen prompts to make the selections.  
frequency, you can set by directly entering  
the frequency number of the channel with  
0 — 9.  
Channel positions can be sorted freely.  
Press 3 to select the channel you want to move.  
DYNAMIC  
(FIXED)  
Changes the image and sound settings  
to the factory preset values. No  
adjustments are allowed.  
Press R to save.  
a
/
Press  
to move it to the desired position,  
b
H
Manual search  
and then press 3 again or ENTER to save.  
Tune the frequency of the stored  
channel to your desired position.  
Add new services within a specified frequency band.  
Skip)  
(
4
c d  
/ to select the frequency and then press ENTER.  
• Press  
Adjust while checking the background  
picture as a reference.  
NOTE  
Channels with “Skip” set to “On” are passed  
r s  
• You can select a different AV mode item for each input  
mode. (For example, select STANDARD for TV input and  
DYNAMIC for VIDEO input.)  
over when using CH  
/
even if selected  
Press R to save.  
Analogue setting  
while watching the image from the TV.  
Press 4 to skip the selected channel.  
Press 4 again to cancel the skip.  
You can reconfigure the TV channel settings  
automatically or manually using Auto search,  
Manual adjust or Programme edit.  
• The frequency shown below the On-Screen Display shows  
the real-time frequency of the displayed channel.  
(Lock)  
5
Menu operation  
You can block the viewing of any selected  
channel.  
H
Auto search  
Password must be set first to allow “ ” to  
Press MENU and the MENU screen displays.  
You can also automatically search by performing  
the procedure below. This is the same function as  
programme auto search in auto installation.  
1
2
function.  
• See page 7 for setting a password.  
Press 5 to lock the selected channel.  
Press 5 again to unlock the locked channel.  
c d  
/ to select the desired menu.  
Press  
(Programme setup, Picture, Audio, ECO, Setup,  
Option)  
Press MENU and the MENU screen displays.  
1
c d  
Press  
/
to select “  
” (Programme setup).  
a
/
Press  
to select the desired menu item.  
2
3
3
4
b
Press ENTER to proceed if necessary.  
c d  
to select the desired item or  
a
Press  
/
to select “Analogue setting”, and  
b
a
Press  
/
or  
/
b
then press ENTER. If you have already set the  
password, enter it here.  
adjust the item to the desired level. Press ENTER  
if necessary.  
• See page 7 for setting a password.  
Press RETURN as necessary to return to the  
previous MENU. Press MENU to exit the MENU.  
5
a
Press  
/
to select “Auto search”, and then  
4
b
press ENTER.  
You do not need to do anything during the auto  
search. Press MENU to exit.  
-
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display Menu  
Picture menu  
H
SRS TruSurround (TS) HD™  
Selected item  
Cinema 16:9  
Description  
SETUP MENU  
You can enjoy SRS TruSurround HD™ sound, the  
same as you were in movie theatre.  
For 16:9 letterbox pictures. Bars may  
appear on the top and bottom with  
some programmes.  
H
H
Picture adjust  
Child lock (ATV and DTV input mode only)  
Allows you to use a password to protect certain  
settings from being accidentally changed.  
Using SRS TS HD on the menu screen  
You can produce SRS TruSurround HD™ effects  
from the “Audio” setting.  
Adjustment items  
Selected item  
Cinema 14:9  
Dot by Dot  
Underscan  
Just scan  
Auto  
For 14:9 letterbox pictures. Bars may  
appear on the top and bottom with  
some programmes.  
c
d
button  
button  
Setting a password  
Selected item  
Description  
The screen  
brightens  
Display an image with the same number  
of pixels on the screen (only when  
receiving 1080i/1080p signal).  
Repeat steps 1 and 2 in Menu operation.  
Backlight  
The screen dims  
For less contrast  
1
2
SRS TruSurround HD™ creates a high  
quality surround sound experience,  
when watching DVD movies and TV  
programmes broadcast in surround  
sound.  
a
ENTER.  
Press  
/
to select “Child lock”, and then press  
b
On  
Contrast  
Brightness  
Colour  
For more contrast  
Display an image with the same number  
of pixels on the screen (only when  
receiving 720p/1080i/1080p signal).  
For less brightness For more brightness  
If you have already set the password, enter it here.  
3
4
Off  
Outputs the normal sound.  
For less colour  
intensity  
For more colour  
intensity  
Keeps the original aspect ratio and  
enlarges the picture as much as  
possible.  
a
Press  
/
to select “Change password”, and  
b
then press ENTER.  
H
Bass enhancer  
Tint  
Skin tones become Skin tones become  
reddish greenish  
Enter the 4-digit number as a password using  
0 – 9.  
5
6
This function allows you to enjoy bass-enhanced  
sound.  
Keeps the original aspect ratio based  
on source information and enlarge the  
picture as much as possible.  
Sharpness  
NOTE  
For less sharpness For more sharpness  
Enter the same 4-digit number as in step 5 to  
confirm.  
Selected item  
On  
Description  
Bass enhancer function is on.  
NOTE  
NOTE  
• Some picture sizes may not be displayable depending on  
the input signal.  
• “Auto”, “16:9”, “4:3” and “Just scan” can be selected only  
during video playback in “Movie mode” of USB Media  
Player.  
• “Picture adjust” cannot be changed during “DYNAMIC  
(FIXED)” mode.  
Off  
Outputs the normal sound.  
• To view a locked channel, you must enter a password.  
When you select a locked channel, “Child lock has been  
activated” is displayed.  
• For resetting all “Picture adjust” items to factory preset  
NOTE  
a
values, press  
/
to select “Reset”, press ENTER, press  
b
• Press ENTER to display the password input window.  
a
/
to select “Yes”, and then press ENTER.  
b
• If distorted bass sound is heard, set to “Off”.  
Clearing the password  
Allows you to clear your password.  
H
Eagle View*  
H
H
Fine motion  
Clear voice  
“Eagle View” technology produces a sharp picture  
from the original moving picture. (“On”, “Off”)  
Use fine motion to view fast-action image more  
clearly. (On, Off)  
This function emphasises speech against  
background noise for greater clarity. (On, Off)  
Repeat steps 1 to 3 in Setting a password.  
1
H
AquoMotion Lite*  
H
NOTE  
DNR (Digital Noise Reduction)  
a
Press  
Press  
/
to select “Clear password”.  
2
3
b
“AquoMotion Lite” technology provides superior  
solutions for display picture quality removing motion  
blur. (“Advanced”, “High”, “Off”)  
Reduces noise on screen and produces a clearer  
video image. (Auto, High, Low, Off)  
• Clear voice only work when SRS TS HD is “On”.  
• For resetting all “Sound adjust” items to the factory preset  
values, press  
a
c d  
ENTER.  
/
to select “Yes”, and then press  
a
/
to select “Reset”, press ENTER, press  
b
H
Wide mode  
/
to select “Yes”, and then press ENTER.  
b
*
NOTE  
Parental rating  
You can manually select the size of a picture  
appeared on your screen.  
Selectable picture size varies with the type of signal  
received.  
This function allows TV channels to be restricted.  
It prevents children from watching violent or sexual  
scenes that may be considered inappropriate.  
• This effect is greater on fast moving images.  
• This function will have no effect in the following cases.  
1)The type of signal received is a PC signal.  
2)An OSD is being displayed.  
3)Teletext is activated.  
• If images appear blurred or flickering, set to “Off”.  
ECO menu  
a
Press  
the screen.  
/
while the wide mode menu displays on  
b
Repeat steps 1 to 3 in Setting a password.  
1
H
No signal off  
You can set the TV to automatically power off in  
about 15 minutes after the TV goes into a state of  
receiving no programme signals. (Enable, Disable)  
• Five minutes before the power shuts down, the remaining  
time displays every minute.  
• As you toggle down the options, each mode is immediately  
reflected on the TV.  
a
Press  
/
to select “Parental rating”, and then  
2
b
press ENTER.  
Selected item  
Normal/4:3  
Description  
Audio menu  
a
Press  
/
to select your desired rating, and then  
3
b
press ENTER.  
For 4:3 “standard” pictures. A side bar  
appears on each side.  
H
Sound adjust  
NOTE  
Zoom 14:9  
For 14:9 letterbox pictures. A thin side  
bar appears on each side, and you may  
also see bars on the top and bottom  
with some programmes.  
• When a TV programme finishes, and the TV receives signal  
input, this function may not operate.  
c
d
Selected item  
Treble  
button  
button  
For weaker treble  
For weaker bass  
For stronger treble  
For stronger bass  
H
No operation off  
Bass  
You can set the TV to automatically power off when  
no TV operation is performed for more than 3 hours.  
(30 min., 3 hr., Disable)  
• Five minutes before the power shuts down, the remaining  
time displays every minute.  
Panorama  
Full/16:9  
In this mode the picture is progressively  
stretched toward each side of the  
screen.  
Decrease audio  
from the right  
speaker  
Decrease audio  
from the left  
speaker  
Balance  
For 16:9 squeeze pictures.  
-
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display Menu  
H
H
Audio return channel  
Quick start  
Audio description (DTV input mode only)  
This function allows you to adjust volume output of  
audio description if the TV receives a signal including  
audio description.  
Selected item  
Off  
Description  
If this function is set to “Auto”, the TV can send  
audio data for video content shown on the TV  
to a connected audio device with just one ARC-  
compatible cable. Using this function eliminates the  
need to use a separate digital or analogue audio  
cable. (Auto, Off)  
You can reduce the TV’s start-up time after turning  
on the power with the remote control unit.  
Cancel the blocking.  
Select desired age to block.  
(Example) If age 14 is selected,  
programmes rated for ages of 15 or  
more are blocked.  
Selected item  
On  
Description  
Press MENU and the MENU screen displays.  
1
Age xx years  
The TV quickly starts up from standby,  
more of power consumption is required  
during standby.  
2 Press c d  
/
to select “  
” (Setup).  
No block  
Cancel the blocking.  
Connection for using “Audio return channel”  
You need to use ARC-compatible cables/devices  
and connect to the INPUT 1 terminal to activate this  
function.  
a
Off  
Power consumption is less than 1W.  
Press  
/
to select “Digital setup”, and then  
3
4
5
b
General and  
above (G)  
press ENTER.  
Content is not offensive to most viewers.  
H
Language  
a
Press  
/
to select “Audio description”, and  
b
Parental  
guidance and  
above (PG)  
Content is such that parents may  
not want their children to view the  
programme.  
Select from among 10 languages: English, Simplified  
Chinese, Arabic, French, Portuguese, Russian,  
Persian, Thai, Vietnamese and Indonesia.  
then press ENTER.  
NOTE  
c d  
to select the volume.  
Press  
/
• The ARC (Audio Return Channel) function works only when  
using the INPUT 1 terminal.  
• When you use an audio system compatible with the ARC  
function of the TV, you do not need to connect an optical  
audio cable to the TV.  
Mature audience only. This programme  
is specifically designed to be viewed by  
adults and therefore may be unsuitable  
for children under 15.  
H
Text language  
Switching the multi audio languages  
Each time you press MPX on the remote control, the  
audio language switches.  
Mature and  
above (M)  
Select from among 5 kinds of language: West  
Europe, East Europe, Cyrillic, Arabic and Farsi.  
Mature adult only. This programme is  
specifically designed to be viewed by  
adults and therefore may be unsuitable  
for children under 15.  
NOTE  
H
Mature adult  
and above  
(MA)  
Auto wide (DTV input mode only)  
1st audio language  
• Teletext can display only when it is sent by a network. Not  
used to convert between languages.  
1st audio language  
+AD (if available)  
The “Auto wide” allows the TV to switch automatically  
among the different picture size. (On, Off)  
2nd audio language  
+AD (if available)  
• • • •  
2nd audio language  
H
Digital setup  
Adult violence Not for children under age 15. Strong  
and above (AV) elements of sex and/or violence.  
NOTE  
Selecting the language  
Set up to two preferred multi audio languages to  
display if the audio languages are available.  
• Use “Wide mode” if an image does not switch to the  
appropriate picture size. When the broadcast signal  
contains no aspect ratio information, the function will not  
work even if enabled.  
NOTE  
Restricted and Not for children under age 18. Strong  
above (R)  
elements of sex and/or violence.  
• This function is valid only if broadcaster is transmitting audio  
description.  
Parental  
Programme is suited to more mature  
viewers.  
Press MENU and the MENU screen displays.  
1
guidance  
recommended  
and above  
(PGR)  
Displaying subtitles for the hearing impaired  
You can display subtitles for the hearing impaired in  
the Teletext broadcast if the subtitle languages are  
available.  
H
4:3 mode (DTV input mode only)  
2 Press c d  
/
to select “  
” (Setup).  
The 4:3 mode allows you to select between “Full”  
and “Normal”.  
a
Press  
/
to select “Digital setup”, and then  
3
4
5
6
b
press ENTER.  
Adults only  
and above  
(AO)  
Adults only. This programme contains  
material of an adult nature handled  
in such a way that is unsuitable for  
children.  
Selected item  
Full  
Description  
Press MENU and the MENU screen displays.  
1
a
Press  
/
b
to select “Digital audio language”, and  
Wide image without side bars.  
2 Press c d  
then press ENTER.  
/
to select “  
” (Setup).  
Normal range keeping 4:3 or 16:9  
aspect ratio.  
Normal  
a
Press  
/
to select “1st language” or “2nd  
to select the desired language.  
b
Block all  
Block all programmes.  
a
Press  
/
to select “Digital setup”, and then  
3
4
5
6
b
language”.  
press ENTER.  
H
HDMI auto view (HDMI input mode only)  
c d  
Press  
/
4:3 screen types  
a
Press  
ENTER.  
/
to select “Subtitle”, and then press  
to select “1st language” or “2nd  
to select the desired language.  
b
Selected item  
Description  
4:3 mode “Full”  
4:3 mode “Normal”  
NOTE  
Enable/  
Disable  
Set whether or not to use the Auto  
Selection of WIDE MODE based on  
signal recognition received from the  
HDMI signal.  
a
Press  
/
b
• If audio for the selected languages is not included in  
a received broadcast, audio will not be output for that  
language.  
language”.  
c d  
/
Press  
H
Link operation  
NOTE  
Using the HDMI CEC (Consumer Electronics Control)  
protocol, with Link operation you can interactively  
operate compatible system equipment (e.g. DVD),  
by connecting the link operation-compatible devices  
with HDMI-certified cables to the TV.  
• If subtitles for the selected language are not included in  
a received broadcast, subtitles will not be shown for that  
language.  
Link operation allows you to operate the HDMI-  
connected equipment and the TV by using a single  
remote control unit. (On, Off)  
-
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display Menu  
H
Switching subtitle languages (DVB Subtitle)  
Each time you press [ on the remote control,  
the subtitle switches when the broadcast contains  
subtitle information.  
HDMI+Analogue  
Fine sync. (PC input mode only)  
Option menu  
Input signal  
H
Output volume select  
Allows you to select what controls the audio output.  
• Some input signals may have to be registered  
manually to display properly.  
• The pairs of input signals (resolutions) in the list  
below are not distinguishable when received.  
In such case, you have to set the correct signal  
manually. After setting once, it will display when the  
same signal (resolution) is input again.  
5
8
Set “Hearing impaired” to “On”  
AUDIO IN  
C.  
Selected item  
Fixed  
Description  
USB  
1
D
C
5
V
1
.
5
A
MHL  
HDMI  
2
2
DIGITAL  
AUDIO  
OUTPUT  
(DC5V 900mA)  
OUTPUT  
HDMI  
1
1
5
8
ARC  
AUDIO(L/R)  
PC  
8
R
S
-
2
3
A
U
D
I
O
I
N
I
O
I
ANALOGUE  
RGB (PC)  
HDMI  
3
3
INPUT  
COMPONENT/A  
AUDIO  
6
6
R
-
-
L
VIDEO/Y  
V
INP  
UT  
B(CB  
P
)
PR(CR  
)
• Sound via speakers is adjusted with  
5
R
-
AUDIO  
AUDIO  
-
L
R
-
AUDIO  
INPUT  
-
L
VIDEO  
(Hearing impaired)  
1st language  
2nd language  
OUT  
7
7
HDMI 5  
USB  
2
HDMI  
5
5
HD  
MI  
4
4
OUTPUT  
DC5V 1.5A  
D
C
5
V
0
.
5
A
VOL  
/
on the remote control unit  
k l  
or the TV.  
• • • • • • • •  
Off  
• Sound via the AUDIO OUT terminal is  
not adjustable and constantly outputs.  
PC  
1280  
768  
1360  
768  
g
g
Set “Hearing impaired” to “Off”  
Variable  
• Sound via the AUDIO OUT terminal  
is adjusted with VOL  
remote control unit or the TV.  
• Sound via speakers is muted.  
/
on the  
k l  
H
Auto volume  
1st language  
2nd language  
Adjusting the PC image automatically  
Different sound sources, fairly often do not have the  
same volume level, for example the changing from  
movie to the advertisements. Auto volume solves this  
problem and equalises the volume levels. (On, Off)  
Auto sync.  
• • • •  
Off  
(Hearing impaired)  
This function enables the screen to be automatically  
adjusted to its best possible condition when the  
analogue terminals of the TV and PC are connected  
with a commercially available RGB cable, etc.  
NOTE  
• When “Output volume select” is set to “Variable”, all Audio  
menu item cannot be adjusted.  
NOTE  
H
Digital audio output  
• This function is valid only if broadcaster is transmitting  
multilingual subtitles.  
This function allows you to select your favourite audio  
output system. (PCM, Auto, Off)  
H
Input select  
For setting the signal type of external equipment.  
NOTE  
Time zone  
• Auto sync. is likely to succeed when an input PC image has  
wide vertical stripes (e.g. pattern with high contrast stripes,  
or cross-hatched).  
This function enables you to select your local time  
zone.  
H
Speaker selection  
Input source  
INPUT6  
Selectable item  
COMPONENT, VIDEO  
You can choose to listen to the external amplifier  
audio only. (On, Off)  
Press MENU and the MENU screen displays.  
It may fail when an input PC image is solid (low contrast).  
1
NOTE  
H
Audio select (HDMI input mode only)  
You must select HDMI+Analogue if uses the AUDIO  
IN (R/L) jack for analogue audio input when using  
INPUT 5 (HDMI) terminal.  
2 Press c d  
/
to select “  
” (Setup).  
Adjusting the PC image manually  
• This function only available when “Link operation” is set to  
“On”.  
• You need to use CEC compatible amplifier to control  
external speaker volume.  
a
Press  
/
to select “Digital setup”, and then  
3
4
5
b
Ordinarily you can easily adjust the picture as  
necessary to change image position using Auto  
sync. In some cases, however, manual adjustment is  
needed to optimise the image.  
press ENTER.  
Option  
Description  
a
Press  
ENTER.  
/
to select “Time zone”, and then press  
b
H
Audio only  
HDMI (Digital) Select “HDMI (Digital)” if the Devices  
(DVD, Blu ray Player, Set Top Box or  
etc.) is connected using HDMI cable to  
INPUT 5 (HDMI) terminal.  
When listening to music from a music programme,  
you can set the display off and enjoy audio only.  
Selected item  
H-Position  
Description  
c d  
/
Press  
to select the desired time zone.  
Centres the image by moving it to the left  
or right.  
Selected item  
Description  
NOTE  
HDMI+  
Analogue  
Select “HDMI+Analogue” if the Devices  
(PC or etc.) is connected using DVI/  
HDMI convert cable to INPUT 5 (HDMI)  
terminal and AUDIO IN (R/L) jack is used  
to input Analogue Audio Signals.  
On  
Off  
Audio is output without screen image.  
• This function lets you select the right time zone in case the  
time displayed in the EPG does not match the local time of  
your area.  
V-Position  
Clock  
Centres the image by moving it up or  
down.  
Both screen images and audio are  
output.  
Adjusts when the image flickers with  
vertical stripes.  
• Time zone differ depending on the selected country.  
NOTE  
H
Identification  
HDMI (Digital)  
DVD player/PC  
Phase  
Adjusts when characters have low  
contrast or when the image flickers.  
You can check the current version of the software on  
the screen.  
• When you make operations that change the picture on the  
TV such as by changing the input source, the “Audio only”  
function is set to “Off”.  
5
HDMI 5  
NOTE  
H
Reset  
C.I.  
USB  
1
D
C
5
V
1
.
5
A
MHL  
HDMI  
2
2
H
• For resetting all “Fine sync.” items to the factory preset  
Colour system  
DIGITAL  
AUDIO  
OUTPUT  
(DC5V 900mA)  
OUTPUT  
HDMI  
1
1
5
8
If complex adjustments are made and the settings  
cannot be restored to normal, you can reset the  
settings to the factory preset values.  
AR
AUDIO(L/R)  
PC  
8
R
S
-
2
3
A
U
D
I
O
I
N
2
C
I
O
I
O
I
ANALOGUE  
RGB (PC)  
HDMI  
3
3
INPUT  
COMPONENT/A  
AUDIO  
6
6
R
-
-
L
VIDEO/Y  
V
INPUT  
P
B(CB  
)
PR(CR  
)
a
R
IO  
-
L
R
-
values, press  
/
to select “Reset”, press ENTER, press  
AUDIO  
INPUT  
-
L
VIDEO  
I
O
U
T
b
7
7
You can change the colour system to one that is  
compatible with the image on the screen. (Auto,  
PAL, SECAM, NTSC 3.58, NTSC 4.43, PAL-60)  
USB  
2
HDMI  
5
5
HDM  
4
I
4
OUTPUT  
DC5V 1.5A  
D
C
5
V
0
.
5
A
a
/
to select “Yes”, and then press ENTER.  
b
• Images may not be displayed properly depending on the  
settings and/or input signals.  
NOTE  
NOTE  
• If you execute “Reset”, all the settings such as “Picture”,  
“Audio” and “Programme setup” will be reset to the factory  
preset values.  
H
DivX (R) VOD  
Please see USB Media Player on page 15.  
• If “Auto” is selected, colour system for each channel is  
automatically set. If an image does not display clearly,  
select another colour system (e.g. PAL, NTSC 4.43).  
• “Colour system” is selectable only when inputting a  
composite signal.  
-
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display Menu  
Direct Button Operation  
H
H
CI menu  
Demo (store mode only)  
In order to receive coded digital stations, a common  
interface module (CI module) and a CA card must be  
inserted in the CI slot of the TV.  
When “Store mode” is set to “On”, after all the  
settings are completed, the Feature demo screen is  
displayed if there is no operation for 30 seconds.  
If you want to have fine motion demo, you must  
select “Fine motion” in Demo screen.  
ATV/DTV/RADIO buttons  
Use the following buttons on the remote control to  
operate the menu.  
ATV/DTV  
H
System data  
USB data transfer  
HDMI  
This function allows you to update the TV to the  
latest software using a USB device. You must  
update the software through the USB terminal.  
EPG  
GUIDE  
INFO  
RADIO  
Software update (OAD)  
• This function is for automatically download the  
data for the version update software over digital  
broadcasts when the “OAD setup” is set to “On”.  
• To download, follow the instructions when the  
download message appears during a digital  
broadcast.  
Checking CI module information  
Programme Guide  
• This menu is only available for digital stations.  
• The content of this menu depends on the provider  
of the CI module.  
You can check the current channel list of DTV/ATV  
respectively.  
DISPLAY  
Module  
• Once the software upgrade is done, the TV will  
automatically go to standby state with Red LED.  
Press GUIDE to display the programme channel  
list.  
1
• General information on CI module displays.  
Menu  
a
Press  
/
to select your desired programme,  
2
3
b
OAD scan  
• Adjustment parameters of each CA card displays.  
and then press ENTER.  
• This function is for manually download the data  
for the version update software over digital  
broadcasts.  
Enquiry  
Press RETURN or GUIDE to exit.  
• You can input numerical values such as passwords  
here.  
CAUTION  
NOTE  
ATV/DTV  
• Do not disconnect the AC cord when the software  
upgrade is in progress, as this may cause the  
upgrade to fail. If problem arises ask a qualified  
service personnel before the software upgrade period  
expires.  
Info  
• Carefully insert the CI module in the CI slot with the contact  
side forward.  
• The logo on the CI module must be facing outward from  
the rear of the TV.  
While watching DTV you can check the extended  
programme information on the screen using INFO  
on the remote control.  
• It takes a few minutes to certify the licence key when you  
insert a CA card into the CI+ compatible CI module for the  
first time. This process may fail when there is no antenna  
input or you have never run “Auto installation”.  
• The CI+ compatible CI module sometimes upgrades its  
firmware. You may not receive any TV images before  
upgrading. You can only use the POWER during  
upgrading.  
• Copy protected content may not be output or may be  
output with a copy control signal. The protect icon* is  
displayed when INFO is pressed while watching copy  
protected contents.  
General INFO screen  
• Station name  
• Title  
EPG  
GUIDE  
INFO  
RADIO  
• Date  
• Time for the current programme  
• Video system  
• Audio system  
• Parental rating  
ATV/DTV: Press to switch between ATV and DTV  
mode. After switching from ATV or DTV, radio or  
external input mode to ATV and DTV mode, the TV  
jumps to the most recently viewed ATV and DTV  
channel.  
RADIO: Press to switch from DTV to radio mode.  
The TV will jumps to the most recently tuned radio  
channel.  
*
Protect icon:  
X
NOTE  
• If the TV displays an update confirmation message for the  
CA card while receiving CI+ compatible broadcasts, follow  
the screen prompts.  
• Make sure that the CI module is properly inserted.  
• If the old CAM is used, authentication may fail. In such  
cases, contact the contracted service provider.  
a
• If there is more information, pressing  
to the next page or return to the previous page.  
• You can cancel this info by pressing INFO.  
/
allows you to go  
b
When you watch the TV for the first time  
When the TV powers on for the first time after  
purchase, perform the auto installation.  
-
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Direct Button Operation  
ATV (Analogue TV)  
You can run the auto installation to set channels  
automatically.  
In the TV mode of A2 TV broadcasts  
Switching the analogue audio  
format  
EPG  
When receiving a stereo signal  
Each time you press MPX, the mode switches  
between STEREO and MONO.  
What is an EPG?  
To watch the analogue TV, select “ATV” from  
“Auto installation” in Programme setup menu.  
(See page 5.)  
1
An “EPG (Electronic Programme Guide)” is a  
programme schedule, which is displayed on the TV  
screen. The EPG is broadcasted together with DTV.  
The TV screen shows the EPG when the viewer  
presses EPG on the remote control, provided that  
the TV is receiving the digital broadcasting signal.  
The EPG enables you to search for a programme, do  
timer view the programme schedule in detail.  
Stereo mode  
You can switch between multiple audio modes  
when watching a multiple audio or stereo broadcast  
programme.  
BBC1  
ATV  
BBC1  
ATV  
After setting the channels, you can select a  
channel using CH  
2
PAL  
B/G  
PAL  
B/G  
MONO  
/
or 0 – 9 on the remote  
r s  
STEREO  
control unit. (See page 4.)  
When receiving a bilingual signal  
Each time you press MPX, the mode switches  
among CH A, CH B and CH AB.  
DTV (Digital TV)  
When the TV accesses to DTV mode for the first  
time, you need to run the auto search. To scan all  
available services in your area, follow the procedures  
below.  
ATV/DTV  
Basic Operation  
Bilingual mode  
BBC1  
ATV  
PAL  
BBC1  
ATV  
PAL  
H
Display the EPG screen  
In the NICAM TV broadcasts  
To watch the DTV broadcasts, select “DTV” from  
“Auto installation” in Programmme setup menu.  
(See page 5.)  
1
1 Press EPG.  
B/G  
B/G  
CH B  
When receiving a stereo signal  
Each time you press MPX, the mode switches  
between NICAM STEREO and MONO.  
CH A  
After setting the channels, you can select a  
channel using CH  
2
BBC1  
ATV  
PAL  
/
or 0 – 9 on the remote  
r s  
Stereo mode  
control unit. (See page 4.)  
BBC1  
ATV  
BBC1  
ATV  
PAL  
B/G  
CH AB  
ATV/DTV  
PAL  
B/G  
B/G  
When receiving a monaural signal  
NICAM  
STEREO  
MONO  
When you press MPX, “MONO” displays.  
When receiving a bilingual signal  
Each time you press MPX, the mode switches  
among NICAM CH A, NICAM CH B, NICAM CH AB  
and MONO.  
Monaural mode  
BBC1  
ATV  
EPG  
GUIDE  
INFO  
RADIO  
PAL  
B/G  
MONO  
Bilingual mode  
BBC1  
ATV  
BBC1  
ATV  
NOTE  
Manual adjust  
• “BBC1”, “01” and “PAL” are tentative network name,  
channel and colour system.  
PAL  
NICAM  
B/G  
CH A  
PAL  
NICAM  
B/G  
CH B  
PROGRAMME GUIDE  
01 Jan  
10 HD Monosco  
TIME  
3
3
20:01  
HD Monosco  
BBC1  
ATV  
PAL  
BBC1  
ATV  
11 Color Bar 5... Color Bar 576i  
12 Monosco 576... Monosco 576–1  
13 Monosco 576... Monosco 576–2  
B/G  
PAL  
B/G  
MONO  
NICAM  
CH AB  
When receiving a monaural signal  
Each time you press MPX, the mode switches  
G
Y
B
INFO  
Schedule  
Remind  
ENTER  
RETURN  
between NICAM MONO and MONO.  
a
Monaural mode  
2 Press  
to select PROGRAMME GUIDE/TIME.  
c d  
BBC1  
ATV  
BBC1  
ATV  
3 Press  
/
to select the desired channel/time  
span.  
PAL  
NICAM  
B/G  
MONO  
PAL  
B/G  
MONO  
H
Close the EPG screen  
4 Press EPG again or RETURN to exit.  
NOTE  
• For “New Zealand delivery model”, the EPG screen and  
operation differ due to the use of MHEG EPG. The EPG  
screen and operation vary depending on the broadcasts.  
-
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Direct Button Operation  
Reminder timer setting  
Using a Smartphone with  
the TV  
This function enables you to connect the TV to a  
smartphone that supports Mobile High-Definition  
Link (MHL) using an MHL-compatible cable.  
To connect the TV to your MHL-compatible  
smartphone, be sure to use an MHL-compatible  
Teletext function  
What is Teletext?  
Teletext broadcasts pages of information and  
entertainment to specially equipped television sets.  
News, weather reports, sports information, stock  
exchange prices and programme previews are  
among the many services available.  
Colour adjustment and still  
image  
You can schedule a reminder for future programmes.  
Channel will automatically change on time as  
scheduled.  
Allows you to adjust the colour tone of a still image.  
Press EPG.  
1
Press COLOUR ADJ. (FREEZE), the moving  
image will be captured and colour adjustment  
screen displays.  
1
Turning on and off Teletext  
cable (commercially available).  
• You can view pictures and video on a large screen.  
• You can play back music files.  
a
watch.  
Press  
/
to select the programme you want to  
2
b
Select a TV channel or external input source  
providing the Teletext programme.  
1
a
c d  
to adjust the colour to your  
Press  
/
/
b
/
2
Press B to set reminder time.  
3
4
m
Press  
to display the Teletext.  
2
3
desired setting.  
m
Press ENTER to save reminder timer.  
• “Timer save success” will display.  
Each time you press  
shown below.  
, the screen switches as  
Button  
Description  
White with greenish tone.  
a
NOTE  
HDMI 2  
MHL  
White with reddish tone.  
White with bluish tone.  
White with yellowish tone.  
2
• “Timer overlay” will display if same time is set twice.  
• “Timer past” will display if past time is set.  
b
c
TELETEXT  
TELETEXT  
MHL-compatible cable  
Press ENTER to display the reminder schedule  
list.  
5
(DC5V 900mA)  
d
R
NOTE  
Reveal/hide the setting screen.  
INPUT 2 terminal (Rear side)  
Press RETURN or EPG to exit.  
6
• If you select a programme with no Teletext signal,  
“No Teletext available.” is displayed.  
• The same message displays during other modes if no  
Teletext signal is available.  
• New Zealand delivery model can receive MHEG data  
broadcasting.  
G
Set adjustment to last user setting.  
NOTE  
Close the setting screen and unfreeze  
image.  
• An MHL-compatible portable device is required to use this  
function. Connect the device to the INPUT 2 terminal.  
• This production incorporates MHL 2.  
B
ENTER  
NOTE  
Viewing the reminder schedule list  
Save/exit setting.  
Press EPG.  
1
Button functions  
H
Auto power on  
When an MHL-compatible device is connected to  
Press Y to display the reminder schedule list.  
2
Buttons  
Description  
• The colour adjustment screen and still image will  
automatically goes out after 30 minutes.  
• Freeze/Colour adjustment function does not work in USB  
Photo/Movie playback. It works for HDMI, composite/  
component and VGA.  
the TV, the TV turns on automatically.  
• This function operates when “Link operation” is set to “On”.  
(See page 8.)  
r s  
CH (  
/
)
Increase or decrease the page number.  
You can select a group or block  
a
Press  
/
to display next or previous screen.  
3
4
b
Colour (Red/  
Press RETURN or EPG to exit.  
Green/Yellow/ of pages displayed in the coloured  
H
Auto input selection  
Blue)  
brackets at the bottom of the screen  
by pressing the corresponding Colour  
(Red/Green/Yellow/Blue) on the  
remote control unit.  
When an MHL-compatible device is connected  
while the TV is on, the input mode is selected  
automatically.  
• This function operates when “Link operation” is set to “On”.  
(See page 8.)  
Cancelling the reminder timer setting  
ECO mode  
Press EPG.  
0 – 9  
Directly select any page from 100 to 899  
by using 0 – 9.  
1
This function enables you to reduce the backlight  
brightness in order to decrease the power  
consumption and increase the backlight life span as  
shown in the following table.  
Press Y to display the reminder schedule list.  
2
3
H
Operation using the remote control  
k
(Reveal  
To reveal hidden information such as an  
answer to a quiz.  
The remote control of the TV can be used to operate  
a portable device.  
hidden for  
TELETEXT)  
a
Press  
cancel.  
/
to select a programme you want to  
b
a
c d  
, ENTER, 0 – 9, etc.  
/
/
/
b
Selected item  
ECO 1  
Description  
3
(Hold)  
To stop updating Teletext pages  
• The operations vary depending on the connected  
equipment and content being viewed.  
Colour (Red/Green/Yellow/Blue) may be available to  
control play/pause/fast forward/back forward function.  
Press R to delete a programme from reminder list.  
4
5
automatically or release the hold mode.  
Reduces the backlight brightness.  
[
(Subtitle for Display the subtitle during Teletext page.  
Press RETURN or EPG to exit.  
Reduces the backlight brightness more  
than “ECO 1”.  
ECO 2  
TELETEXT)  
Subtitle will not be displayed when the  
service does not contain subtitle information.  
• The illustrations used throughout this manual are based  
on LC-60LE360X.  
ECO Off  
Normal setting of backlight brightness.  
NOTE  
ECO status will be displayed on the channel  
information window.  
• Teletext can display only when it is sent by a network. Not  
used to convert between languages.  
-
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using a PC  
PC compatibility chart  
RS-232C commands list  
Commands  
Horizontal  
Frequency  
Vertical  
Frequency  
VESA  
Standard  
Analogue  
(D-Sub)  
• Commands not indicated here are not guaranteed to operate.  
Resolution  
Digital (HDMI)  
CONTROL ITEM  
COMMAND  
PARAMETER  
CONTROL CONTENTS  
VGA  
SVGA  
XGA  
31.5 kHz  
37.9 kHz  
48.4 kHz  
47.7 kHz  
67.5 kHz  
60 Hz  
60 Hz  
60 Hz  
60 Hz  
60 Hz  
640  
480  
600  
768  
768  
1080  
g
g
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
POWER SETTING  
P
I
O
T
T
D
A
C
H
H
T
T
T
V
V
V
V
V
V
O
P
P
L
H
I
I
I
I
I
I
I
I
I
I
I
I
I
U
U
U
C
C
C
C
F
F
F
F
F
F
E
E
W
G
V
R
D
D
V
0
_
_
_
POWER OFF (STANDBY)  
800  
1024  
1360  
1920  
INPUT SWITCHING (TOGGLE)  
ATV (CHANNEL FIXED)  
DTV (CHANNEL FIXED)  
INPUT 1 – 9 (1 – 9)  
ATV DIRECT CHANNEL (1 – 99)  
ATV CHANNEL UP  
ATV CHANNEL DOWN  
DTV DIRECT CHANNEL (1 – 999)  
DTV CHANNEL UP  
DTV CHANNEL DOWN  
TOGGLE  
I
I
g
INPUT SELECTION  
CHANNEL  
T
WXGA  
1080P  
I
V
D
H
P
W
D
P
W
D
D
D
D
D
D
M
S
S
K
E
g
*
D
C
C
D
D
D
A
A
A
A
A
C
U
D
V
*
_
*
_
g
_
_
*
_
*
_
*
_
DDC is a registered trademark of Video Electronics Standards Association.  
Power Management is a registered trademark of Sun Microsystems, Inc.  
VGA, SVGA, XGA and WXGA are registered trademarks of International Business Machines Corporation.  
U
D
M
M
M
M
M
M
L
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
0
1
2
5
6
7
*
*
*
*
STANDARD  
MOVIE  
DYNAMIC  
DYNAMIC (FIXED)  
PC  
AV MODE SELECTION  
PC Control of the TV  
A
VOLUME  
V
VOLUME (0 – 100)  
H-POSITION (PC) (000 – 180)  
V-POSITION (PC) (000 – 120)  
CLOCK (000 – 180)  
PHASE (000 – 015)  
TOGGLE (AV)  
*
*
*
*
*
*
*
*
• When a programme is set, the TV can be controlled from  
the PC using the RS-232C terminal.  
The input signal (PC/video) can be selected, the volume  
can be adjusted and various other adjustments and settings  
can be made, enabling automatic programmed playing.  
• Attach an RS-232C cable cross-type (commercially  
available) to the Din/D-sub RS-232C for the connections.  
Command format  
H
V
O
O
C
S
D
D
D
D
D
D
D
D
D
D
D
D
D
T
Eight ASCII codes  
CR  
e
POSITION  
C
P
C1 C2 C3 C4 P1 P2 P3 P4  
Command 4-digits Parameter 4-digits Return code  
*
*
_
*
_
W
W
W
W
W
W
W
W
W
W
W
W
W
M
M
M
A
E
E
E
E
E
E
E
E
E
E
E
E
E
E
0
1
2
3
4
5
6
7
9
1
1
1
1
0
1
2
0
1
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
NORMAL (AV)/4:3 (USB – MOVIE)  
ZOOM 14:9 (AV)  
NOTE  
PANORAMA (AV)  
Command 4-digits: Command. The text of four characters.  
Parameter 4-digits: Parameter 0 – 9, space, ?  
• This operation system should be used by a person who is  
accustomed to using PCs.  
FULL (AV)/16:9 (USB – MOVIE)  
CINEMA 16:9 (AV)  
CINEMA 14:9 (AV)  
NORMAL (PC)  
WIDE MODE  
Parameter  
Communication conditions  
Input the parameter values, aligning left, and fill with  
space(s) for the remainder. (Be sure that four values  
are input for the parameter.)  
When the input parameter is not correct, “ERR”  
returns. (Refer to “Response code format”.)  
Set the RS-232C communications settings on the  
PC to match the communications conditions of the  
TV. The communications settings of the TV are as  
follows:  
FULL (PC)  
DOT BY DOT (PC)  
UNDERSCAN  
0
1
2
3
_
AUTO (USB – MOVIE)  
JUST SCAN (USB – MOVIE)  
TOGGLE  
Baud rate:  
Data length:  
Parity bit:  
9,600 bps  
8 bits  
_
_
_
_
_
_
_
_
_
_
_
_
_
_
0
0
0
0
9
a
3
0
MUTE  
T
E
MUTE ON  
MUTE OFF  
T
E
S
S
S
H
T
T
T
T
T
U
U
U
A
M
M
M
M
M
M
T
SRS TS HD TOGGLE  
SRS TS HD ON  
Response code format  
None  
SRS TS HD  
A
A
A
O
O
O
O
O
O
T
Stop bit:  
1 bit  
2
_
SRS TS HD OFF  
TOGGLE  
OFF  
Normal response  
AUDIO CHANGE  
O
K
Flow control:  
None  
0
1
2
3
4
5
0
1
SLEEP TIMER 30 MIN  
SLEEP TIMER 1 HOUR  
SLEEP TIMER 1 HOUR 30 MIN  
SLEEP TIMER 2 HOUR  
SLEEP TIMER 2 HOUR 30 MIN  
TEXT OFF  
Return code (0DH)  
Communication procedure  
Send the control commands from the PC via the  
RS-232C connector.  
The TV operates according to the received command  
and sends a response message to the PC.  
Do not send multiple commands at the same time.  
Wait until the PC receives the OK response before  
sending the next command.  
SLEEP TIMER  
Problem response (communication error or incorrect  
command)  
T
X
E
R
R
TEXT  
T
X
T
TEXT CHANGE TOGGLE  
Return code (0DH)  
NOTE  
• If an underbar (_) appears in the parameter column, enter a space.  
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.  
-
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB Media Player  
H
Control panel for photo/music/movie mode operations  
• Press B to display the control panel below.  
Selecting modes  
PHOTO slideshow  
2
USB  
Button/  
Description  
menu  
C:\Photo  
1/2  
Photo  
Music  
Movie  
When selecting a folder icon: Enter this directory.  
ENTER  
WxH:  
1300 X 822  
Size:  
789 KBytes  
Date:  
When selecting a thumbnail: Play the selected file.  
Back  
Play/Pause.  
Rewind. Each time you press rewind, the speed will change  
(2x, 4x, 8x, 16x).  
Photo mode  
Music mode  
Movie mode  
2011 / 08 / 04  
Time:  
Fireworks.jpg  
10 : 12 :12  
Fast-forward. Each time you press fast-forward, the speed will  
change (2x, 4x, 8x, 16x).  
Ski Action.jpg  
Switzerland.jpg Ski Action.jpg Japan-hokkaid..  
Island.jpg  
Press INPUT to select the “USB” mode.  
1
2
Play the previous file.  
Play the next file.  
When you press PHOTO, the TV screen will  
c d  
/ to select “Photo mode”, “Music  
Press  
automatically play the photo slideshow.  
• If there is no USB drive, the TV will switch to Selecting  
modes screen.  
• Photo slideshows will autoplay only for the photos located  
on the top layer of USB drive. To enable autoplay for  
photos located in a subfolder, you need to manually select  
the subfolder, and then press PHOTO.  
mode” or “Movie mode”, and then press ENTER.  
Stop playback and return to the list of files.  
G/  
c d  
/
Press  
to select your USB directory, and  
3
4
Loop. Each time you press ENTER, the mode will switch between  
then press ENTER.  
Repeat 1  
Repeat All  
Repeat None  
a
c d  
to select the desired folder, and  
Press  
/
/
/
b
Play/cancel the background music.  
then press ENTER.  
You can select the duration for each photo to display,  
and also the duration for the slideshow to play.  
Mute. Press ENTER to toggle between mute and unmute.  
NOTE  
Two loop. Press ENTER to set the current playback time starting  
point. Press ENTER to set the loop end of the current playing time  
and start loop playback. Press ENTER button to cancel the loop.  
• “Wide mode” is fixed during “Photo mode” and “Music  
mode”.  
• Depending on the USB device, the TV may not be able to  
recognise the contained data.  
• A file name with more than 10 characters may not be  
displayed all (depending on the character set).  
• Files in USB 1.1 devices may not be played properly.  
• Operation using USB hubs is not guaranteed.  
• The compatibility of USB HDDs may not be guaranteed.  
Duration for photos to display  
3 seconds  
5 seconds  
10 seconds  
1 minute  
Show playlists. Select a file from the playlists to start playback.  
Display information about the file.  
Duration for slideshow to play  
1 hour  
3 hour  
Continuous  
Slow-forward.  
Each time you press slow-forward, the speed will change.  
• The TV will automatically power off after the  
selected playtime ends.  
Single frame-forward.  
Each time you press ENTER, the picture will change to the next still  
picture.  
NOTE  
Set time for music/movie playback.  
Rotate clockwise 90º.  
• Background music will autoplay during a slideshow only if  
the music file is located in the same folder with the photo  
files.  
• If you want to stop the photo slideshows, press RETURN  
to exit.  
Rotate counterclockwise 90º.  
Zoom in an image. Select to display larger image size.  
Zoom out an image. Select to display smaller image size.  
Pan image up, down, left or right after you zoom in. Press ENTER  
to exit.  
Select playback length of a slideshow.  
Select photo display interval.  
Wide mode.  
You can manually select the size of a picture appeared on your  
screen.  
NOTE  
• Files in folder which are not related to a selected mode cannot be accessed.  
• “Unsupported file” alert will pops up for a selected file of invalid format.  
-
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB Media Player  
Appendix  
Troubleshooting  
DivX® setup  
The problems described below are not always caused by malfunctions. Check the TV again before having the  
TV serviced.  
This is the function to confirm your registration code.  
Press MENU and the MENU screen displays.  
1
Problem  
Possible Solution  
2 Press  
c d  
/
to select “  
” (Option).  
• No power.  
• Check if you pressed POWER on the remote control unit. (See page 5.)  
If the indicator on the TV lights up red, press POWER.  
• Is the AC cord disconnected?  
a
Press  
/
b
to select “DivX ( R ) VOD”, and then press ENTER.  
3
• Copy the 10 digit code down.  
• Has the power been turned on? (See page 5.)  
DivX ( R ) VOD Register  
• Unit cannot be operated.  
• External influences such as lightning, static electricity, etc., may cause improper operation.  
In this case, operate the unit after first turning the power off the TV or unplugging the AC  
cord and re-plugging it in after 1 or 2 minutes.  
You need to visit the DivX main page to register your TV. Please follow the online instruction to create DivX  
account and DivX registration video download.  
Your registration is complete when you play the DivX registration video on TV.  
• Remote control unit does  
not operate.  
• Is battery inserted with polarity (  
,
) aligned? (See page 4.)  
f
e
DivX ( R ) VOD Deregister  
You can find the deregistration code (8~10 digits). Please use this code to deactivate on DivX website.  
• Is battery worn out? (Replace with new battery.)  
• Are you using it under strong or fluorescent lighting?  
• Is a fluorescent light shining on the remote control sensor?  
NOTE  
• Picture is cut off.  
• Is the image position correct? (See page 9.)  
• Are screen mode adjustments such as picture size made correctly?  
(See pages 7 and 9.)  
List of files compatible with USB mode  
• Strange colour, light  
colour, or dark, or colour  
misalignment.  
• Adjust the picture tone. (See page 7.)  
• Is the room too bright? The picture may look dark in a room that is too bright.  
• Check the colour system setting. (See pages 6, 9.)  
• Check the input signal setting. (See page 9.)  
USB device/File system  
Photo file format  
USB Memory/FAT/FAT32/NTFS  
JPEG (.jpg)/PNG/BMP  
• Check the HDMI auto view setting. (See page 8.)  
Music file format (Files may not be  
playable depending on the bitrate)  
MP3 (.mp3) Bitrate: 32 k, 40 k, 48 k, 56 k, 64 k, 80 k, 96 k, 112 k, 128 k, 160 k,  
192 k, 224 k, 256 k, 320 kbps  
Sampling frequency: 32 k, 44.1 k, 48 kHz  
• Power is suddenly turned  
off.  
• The unit’s internal temperature has increased.  
Remove any objects blocking the vent or clean.  
• Check the ECO setting. (See page 7.)  
• Is the sleep timer set? (See page 4.)  
Video file format  
• No picture.  
• Is the connection to external equipment correct? (See page 3.)  
• Has the input signal setup been performed correctly after connection? (See page 9.)  
• Is the correct input selected?  
• Is the “Picture adjust” correct? (See page 7.)  
• Is the antenna connected properly? (See page 3.)  
• Is “On” selected in “Audio only”? (See page 9.)  
File extension  
Container  
Video  
DivX 3.11/4.12/5.x/6  
H.264  
*.avi  
AVI  
MPEG4  
Motion Jpeg  
DivX 3.11/4.12/5.x/6  
H.264  
• No sound.  
• Is the volume too low? (See page 4.)  
• Make sure that headphones are not connected.  
*.mkv  
MKV  
MPEG4  
• The TV sometimes makes a • This is not a malfunction. This happens when the cabinet slightly expands and contracts  
cracking sound. according to changes in temperature. This does not affect the TV’s performance.  
DivX 3.11/4.12/5.x/6  
H.264  
*.mp4  
*.mov  
MP4  
MPEG4  
Cautions regarding use in high and low temperature environments  
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.  
This is not a malfunction, and the unit will recover when the temperature returns to normal.  
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a  
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.  
*.vob  
MPEG2 – PS  
MPEG2  
MPG  
MPEG  
MPEG2  
MPEG1  
*.mpg/*.mpeg  
H.264  
MPEG2  
Storage temperature: 20°C to 60°C.  
f
e
*.ts/*.trp/*.tp  
TS  
DivX 3.11/4.12/5.x/6  
VC-1  
*.asf  
ASF  
DivX  
*.divx  
DivX 3.11/4/4.12/5.x/6  
-
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Protection against overturning  
There is a danger of the product overturning in the case of a disaster or sudden collision. Carry out the  
following tip-resistant measurement for your safety.  
Item  
Model  
LC-60LE360X  
LC-70LE360X  
LCD panel  
152 cm  
2,073,600 pixels (1920  
177 cm  
Anchoring the TV to the wall or a pillar  
Resolution  
1080)  
g
View from the top  
Affix the TV to the wall or a pillar using extra  
strong ties and cup hooks.  
1
Video colour system  
TV function TV-standard Analogue  
Digital  
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60  
1
PAL: B/G, D/K, I SECAM: B/G, D/K, K/K  
NTSC:M  
Cup hook  
(commercially available)  
Tie  
(commercially available)  
DVB-T2  
Receiving  
channel  
VHF/UHF  
CATV  
44.25—863.25 MHz  
S1—S41 ch (including Hyperband)  
Auto Preset 99 ch  
Wall  
TV-tuning system  
STEREO/BILINGUAL  
NICAM: B/G, I, D/K A2 stereo: B/G  
H : 176º V : 176º  
MTS: M  
Viewing angles  
Audio amplifier/Speakers  
10 W  
2 / 4.5  
10 cm 2pcs  
g
g
Terminals  
Antenna input  
UHF/VHF 75 DIN type  
q
INPUT 1 (HDMI/ARC)  
INPUT 2 (HDMI/MHL)  
HDMI (HDMI input)  
HDMI (HDMI input)  
INPUT 3/INPUT 4/INPUT 5 (HDMI) HDMI (HDMI input)  
DIGIT  
A
AUDIO  
OUTPU  
INPUT 6  
VIDEO in, AUDIO in, COMPONENT in  
INPU  
COMPONE  
R
-
AUDIO  
-
L
VI  
R
-
AUDIO  
-
L
R
A
U
D
I
O
O
U
T
INPUT 7  
VIDEO in, AUDIO in  
15 pin mini D-sub  
AUDIO out  
INPUT 8 (PC)  
Fixing the TV to the table  
AUDIO OUT  
3.5 mm jack*1  
Place the TV on the table.  
AUDIO IN (HDMI 5/INPUT 8 (PC))  
USB 1/ USB 2  
OUTPUT  
1
2
USB  
Two fixing brackets are rotated outside.  
USB  
Insert commercially available screw in the hole of the  
fixing bracket from the top and tighten the screw to  
secure the TV to the table.  
RS-232C  
9 pin D-sub male connector  
Optical Digital Audio Output  
3.5 mm stereo  
3
C.I.  
USB  
1
DIGIT  
A
L
AUDIO  
OUTPUT  
DC5  
V
1.5A  
MHL  
HD  
MI  
2
2
HDMI  
1
1
PC  
8
ARC  
5
8
(DC  
5V 900m  
A)  
ANAL  
RGB  
RS-232C  
O
GUE  
IOIOI  
AUDIO  
(
PC)  
IN  
OUTP  
UT  
INPUT  
ONE  
R
-
AUD  
COMP  
6
6
AU  
DIO(L  
IO  
-
L
NT/A  
V
/R)  
VIDEO  
INPUT  
/Y  
P
B(CB  
)
P
R
(CR  
)
HDMI  
3
3
R
-
AUD  
IO  
-
L
AUDIO  
R
-
AU  
OUT  
DIO  
INPUT  
-
L
7
VIDEO  
7
DIGITAL AUDIO OUTPUT  
Headphone  
USB  
2
HDMI  
5
5
HDMI  
4
D
C
5
V
0
.
4
5A  
OUTPU  
DC5V  
1
T
.5A  
C.I. (Common Interface)  
EN50221, R206001, CI Plus specification  
OSD language  
English/Simplified Chinese/Arabic/French/Portuguese/Russian/Persian/  
Thai/Vietnamese/Indonesia  
Table  
Power requirement  
AC 110 — 240 V, 50/60 Hz  
Power consumption  
173 W (0.5 W Standby)  
207 W (0.5 W Standby)  
Dimensions without stand  
with stand  
1355 (W)  
1355 (W)  
786 (H)  
825 (H)  
86 (D) mm  
1563 (W)  
903 (H)  
942 (H)  
87 (D) mm  
g
g
g
g
g
g
g
g
Screws  
(commercially  
available)  
350 (D) mm 1563 (W)  
350 (D) mm  
Weight without stand (with stand)  
Operating temperature  
24 kg (27 kg)  
0°C — 40°C  
33.5 kg (36.5 kg)  
*
1 The HDMI 5 and INPUT 8 terminals can both use the same audio input terminal.  
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for  
product improvement without prior notice. The performance specification figures indicated are nominal values of production  
units. There may be some deviations from these values in individual units.  
• Specification may differ depending on the selected country.  
CAUTION  
CAUTION  
• As this product is heavy, use a table that is wide enough to support the product and capable of withstanding the  
product’s weight. The table should be set where it will not be overturned.  
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel.  
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting  
that results in accident or injury.  
• The illustrations used throughout this manual are based on LC-60LE360X.  
• Carefully read the instructions that come with the bracket before beginning work.  
-
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensional drawings  
CLEARING THE PASSWORD  
If you forget the password, clear the password using the following procedure.  
Unit : mm  
LC-60LE360X  
Press MENU to display the MENU screen, and  
1
86  
1355  
c d  
69  
then press  
/
to select “  
” (Setup).  
a
Press  
/
b
to select “Child lock”, and then press  
2
3
4
ENTER and the password input screen display.  
If you enter “3001” using 0 – 9, the “Child lock”  
setting menu will be displayed.  
Enter the 4-digit number as a password using  
0 – 9. The new password is now set.  
1332.4  
350  
901  
400  
DISPLAY  
ATV/DTV  
87  
1563  
LC-70LE360X  
69  
1540.6  
901  
400  
350  
.
The Password is  
NOTE  
• As a precautionary measure, make a note of your password above, remove it from this manual, and keep it in a familiar place.  
-
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FOR LOCATION ENQUIRIES WITHIN  
AUSTRALIA  
REGARDING YOUR LOCAL  
SHARP APPROVED SERVICE CENTRE  
VISIT OUR WEBSITE AT  
OR CALL SHARP CUSTOMER CARE  
1300 135 022  
(LOCAL CALL COSTS APPLY WITHIN AUSTRALIA)  
SHARP CORPORATION OF AUSTRALIA PTY LTD  
loss or damage. You are also entitled to have the goods repaired or replaced  
FOR LOCATION ENQUIRIES WITHIN  
NEW ZEALAND  
REGARDING YOUR LOCAL  
SHARP APPROVED SERVICE CENTRE  
VISIT OUR WEBSITE AT  
CONTACT YOUR SELLING DEALER/RETAILER  
OR CALL  
SHARP CUSTOMER SERVICES  
TELEPHONE: 09 573 0111  
FACSIMILE: 09 573 0113  
SHARP CORPORATION OF NEW ZEALAND LIMITED  
Printed in Malaysia  
TINS-G212WJZZ  
14P07-MA-NF  
SPform019(AUGUST 2011)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Shark Bicycle Accessories RSR2 User Manual
Sierra Products Stove EasyFire B User Manual
Sony Car Stereo System D SJ15 User Manual
Sony Car Stereo System MEX R5 User Manual
Sony Headphones DAV F300 F310 User Manual
Sony Recording Equipment MSW 2000P User Manual
Sunpentown Intl Freezer UF 150SS User Manual
Sylvania DVD VCR Combo CDVC90DP User Manual
Tanita Computer Monitor BF 664 User Manual
Targus Computer Monitor nx6310 User Manual