LC-32DH57E
LC-32DH57S
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISEUR COULEUR À ÉCRAN
CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO
TELEVISIÓN EN COLOR LCD
TELEVISOR DE CRISTAL LÍQUIDO
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
OPERATION MANUAL
•
•
•
The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual operations.
The examples used throughout this manual are based on the LC-32DH57E model.
LC-32DH57E and LC-32DH57S models are compatible with H.264 (MPEG4 H.264, MPEG4 AVC, MPEG4 AVC/H.264) compressed
broadcasts.
•
The marks (-BK, etc.) at the end of model name represent the colour of the TV cabinet.
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-free
operation of your product, please read the Important Safety Precautions carefully before using this product.
Contents
Contents...................................................................... 1
Introduction................................................................. 2
Important Safety Precautions................................ 2
Trademarks........................................................... 2
Remote control unit .............................................. 3
TV (Front view)...................................................... 4
TV (Rear view)....................................................... 4
Preparation.................................................................. 5
Supplied accessories............................................ 5
Optional accessory ............................................... 5
Attaching the stand unit........................................ 5
Inserting the batteries............................................ 6
Using the remote control unit................................ 6
Cautions regarding the remote control unit...... 6
Quick guide................................................................. 7
Initial installation overview...................................... 7
Before turning on the power ................................. 8
Initial auto installation ............................................ 9
Checking signal strength................................. 9
Watching TV.............................................................. 10
Daily operation.................................................... 10
Switching on/off............................................ 10
Switching between digital and analogue
Basic adjustment...................................................... 17
Picture Settings .................................................. 17
AV MODE...................................................... 18
Audio Settings .................................................... 18
Automatic volume adjustment....................... 19
Outputting audio only.................................... 19
Setting audio input........................................ 19
Power Save Settings........................................... 20
Channel Settings ................................................ 20
Auto Installation ............................................ 20
Channel detail settings.................................. 20
Password/Parental lock settings ................... 22
Language Settings.............................................. 22
Useful viewing functions.......................................... 23
Selecting the picture size .................................... 23
Display Settings.................................................. 23
Channel display............................................. 23
Time and Title display ................................... 23
Other useful features ............................................... 24
Setting when using external devices ................... 24
Input source settings..................................... 24
Skipping specified inputs .............................. 24
Reset.................................................................. 24
Identification ....................................................... 24
Software update ................................................. 24
Connecting a PC....................................................... 25
Connecting a PC ................................................ 25
Displaying a PC image on the screen.................. 25
Selecting the picture size .............................. 25
Adjusting the PC image automatically ........... 26
Adjusting the PC image manually.................. 26
RS-232C port specifications............................... 27
PC compatibility chart......................................... 28
RS-232C command list ...................................... 28
Appendix ................................................................... 29
Troubleshooting .................................................. 29
Specifications ..................................................... 30
End of life disposal.............................................. 31
Rating table for Child Lock.................................. 32
Abbreviation list .................................................. 32
broadcasts................................................. 10
Changing channels ....................................... 10
Selecting an external video source................ 10
Selecting a sound mode ............................... 10
EPG.................................................................... 11
Teletext............................................................... 12
Using the MHEG-5 application (UK only)............. 12
Connecting external devices................................... 13
Video connections .............................................. 13
HDMI connection.......................................... 13
Component connection ................................ 14
VIDEO connection......................................... 14
SCART connection ....................................... 14
Audio connections.............................................. 15
Speaker/amplifier connection........................ 15
Inserting the CA Card into the CI Module............ 15
Menu operation......................................................... 16
What is the MENU? ............................................ 16
Basic Operation ............................................ 16
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Important Safety Precautions
•
•
•
•
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use
liquid cleaners or aerosol cleaners.
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and
in a wet basement.
Do not place vases or any other water-filled containers on this product. The water may spill onto the product
causing fire or electric shock.
Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product
to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod,
bracket or table recommended by the manufacturer or sold with the product. When mounting the product on
a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the
manufacturer.
•
•
When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive
force and uneven floor surface can cause the product to fall from the cart.
Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or block
these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the
product. Do not place the product on a bed, sofa, rug or other similar surface, since they can block ventilation
openings. This product is not designed for built-in installation; do not place the product in an enclosed place
such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are
followed.
•
•
The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or
impact applied. If the LCD panel is broken, be careful not to be injured by broken glass.
Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other heat-
generating products (including amplifiers).
•
•
•
•
•
•
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
Headphones—Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
Do not display a still picture for a long time, as this could cause an afterimage to remain.
There is power consumption always if main plug is connected.
Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other dangerous
conditions. Request a qualified person to perform servicing.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of blue, green or
red. This is within product specifications and does not constitute a fault.
Precautions when transporting the TV
When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two people holding it with two
hands—one hand on each side of the TV.
Trademarks
•
“HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”
•
•
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
•
•
•
The “HD ready” Logo is a trademark of EICTA.
The “HD TV” Logo is a trademark of EICTA.
The DVB logo is the registered trademark of the Digital Video Broadcasting—DVB—project.
NOTE
•
LC-32DH57E and LC-32DH57S models are compatible with Dolby Digital Plus.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Remote control unit
1
B (Standby/On)
Q
i+/- (Volume)
(Page 10)
Increase/decrease TV volume.
2
Numeric buttons 0_9
Set the channel.
W :r/s
Select the TV channel.
1
2
Enter desired numbers.
Set the page in teletext mode.
E
b (INPUT SOURCE)
Select an input source (Page 10).
10
•
When the five Nordic countries
(Sweden, Norway, Finland,
Denmark, or Iceland) are
R ?
Directly select EXT 4.
11
12
selected in the country setting
from “Auto Installation” (Page
20), DTV/ATV channels are
four digits. When another
country is selected, DTV/ATV
channels are three digits.
T @
“MENU” screen on/off.
Y RETURN
Return to the previous “MENU”
3
4
5
13
14
15
screen.
U Buttons for useful operations
3
A (Flashback)
m (Teletext)
ATV: Display analogue teletext
(Page 12).
DTV: Select MHEG-5 and teletext
for DTV (Page 12).
Press to return to the previously
selected channel or external
input.
6
7
16
17
4
5
6
f (WIDE MODE)
Select a wide mode (Pages 23
and 25).
8
9
k (Reveal hidden Teletext)
(Page 12)
Z (Freeze)
Press to freeze a moving image
on the screen.
[ (Subtitle)
Switch subtitle languages on/off
(Pages 12 and 22).
a/b/c/d (Cursor)
Select a desired item on the
setting screen.
3 (Freeze/Hold)
Press to freeze a moving image
on the screen.
Teletext: Stop updating teletext
pages automatically or release
the hold mode (Page 12).
;
Execute a command within the
“MENU” screen.
TV: Display the programme list
when no other “MENU” screen
is running.
0
p (Display information)
Press to display the station
information (channel number,
signal, etc.) in the upper right
1 (Subpage)
(Page 12)
corner of the screen (Page 23).
v (Top/Bottom/Full)
Set the area of magnification in
teletext mode (Page 12).
7
8
>
SLEEP
Exit the “MENU” screen.
Press to schedule a time for the
TV to automatically standby.
Colour (Red/Green/Yellow/
Blue) buttons
The coloured buttons are
correspondingly used to select
the coloured items on the screen
(e.g., EPG, MHEG-5, Teletext).
#
Select a video setting (Page 18).
ECO (Off/Standard/Advanced)
Select “Energy Save” setting
(Page 20).
9
EPG
TV: Display the EPG screen
(Page 11).
; (Sound mode)
Select a sound multiplex mode
(Page 10).
e (Mute)
TV sound on/off.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
TV (Front view)
1
2
3
4
5
6
7
Remote control sensor
OPC sensor
B (Standby/On indicator)
a (Power button)
@ (Menu button)
b (Input source button)
:r/s (Programme [channel]
buttons)
4
5
6
1
2
3
7
8
8
i+/- (Volume buttons)
TV (Rear view)
1
2
COMMON INTERFACE slot
SERVICE terminal (USB terminal
for service personnel only)
HDMI 3 (HDMI) terminal
EXT 8 terminals
Headphones
AC INPUT terminal
3
4
5
6
7
6
1
EXT 4 (ANALOGUE RGB)
terminal
8
9
HDMI 1 (HDMI) terminal
HDMI 2 (HDMI) terminal
10 Antenna terminal
11 HDMI 2/PC AUDIO (R/L) jack*
12 DIGITAL AUDIO OUTPUT
terminal
13 RS-232C terminal
14 EXT 3 (COMPONENT/AUDIO)
terminals
15 EXT 1 (RGB) terminal
16 EXT 2 (AV) terminal
17 OUTPUT (AUDIO) terminals
2
3
8
9
7
10
4
5
WARNING
11
12
•
Excessive sound pressure from earphones
and headphones can cause hearing loss.
Do not set the volume at a high level.
Hearing experts advise against extended
listening at high volume levels.
•
13
•
The SERVICE terminal is reserved only
for qualified service personnel. Do not
connect anything to the terminal.
14
15
16
17
*
The HDMI 2 and EXT 4 terminals can both use the same audio input terminal (HDMI 2/PC AUDIO (R/L)). However, the
proper item must be selected in the “PC Audio Select” menu (Refer to page 19 for details).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Supplied accessories
Remote control unit ( x 1)
AC cord ( x 1)
Stand unit ( x 1)
Product shape varies in
some countries.
Pages 3 and 6
Page 8
Page 5
•
•
Operation manual (This publication)
“AA” size zinc-carbon battery ( x 2) ... Page 6
Optional accessory
The listed optional accessory is available for this LCD
colour TV. Please purchase them at your nearest shop.
No.
Part name
Part number
Wall mount bracket (LC-
32DH57E, LC-32DH57S)
•
Additional optional accessories may be available in the near
future. When purchasing, please read the newest catalogue for
compatibility and check the availability.
1
AN-37AG5
Attaching the stand unit
•
•
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it
from being damaged.
CAUTION
•
•
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
Confirm that there are four screws with the
stand unit.
3
Insert and tighten the four screws on the
bottom of the stand unit as shown (2).
2
Place the stand unit onto the supporting
post on the bottom of the TV (1).
NOTE
•
•
To detach the stand unit, perform the steps in reverse order.
A screw driver is not supplied with this product.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Inserting the batteries
Before using the TV for the first time, insert two supplied “AA” size zinc-carbon batteries. When the batteries become
depleted and the remote control unit fails to operate, replace the batteries with new “AA” size batteries.
1
2
Open the battery cover.
Insert two supplied “AA” size batteries.
•
Place batteries with their terminals corresponding to the (e)
and (f) indications in the battery compartment.
3
Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
•
•
Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old
batteries.
•
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical leakage,
wipe thoroughly with a cloth.
•
•
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control unit
and sensor may prevent proper operation.
5 m
Remote control sensor
30°
30°
Cautions regarding the remote control unit
•
•
•
Do not expose the remote control unit to shock. In addition, do not expose the remote
control unit to liquids, and do not place in an area with high humidity.
Do not install or place the remote control unit under direct sunlight. The heat may cause
deformation of the unit.
The remote control unit may not work properly if the remote control sensor of the TV is
under direct sunlight or strong lighting. In such cases, change the angle of the lighting or
the TV, or operate the remote control unit closer to the remote control sensor.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick guide
Initial installation overview
Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending
on your TV installation and connection.
Run the
Preparation
initial
Watch TV
settings
n Connect an antenna cable to the n Turn on the power using a on
n Congratulations!
antenna terminal (Page 8).
the TV (Page 10).
Now you can watch TV.
o If necessary, adjust the antenna
to attain maximum signal
reception (Page 9).
Connect external
devices
o Run the initial auto installation
(Page 9).
o If necessary, insert a CA
card into the CI slot to watch
scrambled broadcasts (Page 15).
✔
Language setting
n Connect external devices
such as a DVD player/
recorder as instructed (Pages
13_14).
English
Português
✔
✔
Home/Store setting
HOME
STORE
p Connect the AC cord to the TV
(Page 8).
Country setting
o Connect external audio
devices such as speakers/
amplifier as instructed (Page
15).
Austria
Finland
✔
Installation start
confirmation
Start
Skip
Product shape varies in some
countries.
Start searching
channels
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick guide
Before turning on the power
ꢀ
*
ꢁ
Place the TV close to the AC outlet,
and keep the power plug within
reach.
n Standard DIN45325 plug (IEC 169-2) 75 q coaxial cable
o AC cord (Product shape varies in some countries)
*
The AC cord is supplied either with a ferrite core or without a ferrite core. Neither
type causes unnecessary electrical wave emissions or interference.
Supplying power to the antenna
When an active antenna is used, power must be supplied to the antenna using the following procedures after
connecting the antenna cable to the antenna terminal on the rear of the TV in order to receive terrestrial digital
signals.
1
2
3
4
5
Press @ and the “MENU” screen displays.
Press c/d to select “Setup”.
Press a/b to select “Antenna Setup”, and then press ;.
Press a/b to select “Supply Voltage”, and then press ;.
Press c/d to select “On”, and then press ;.
Mounting the TV on a wall
•
This TV should be mounted on a wall only with the wall mount bracket available from SHARP (Page 5). The use of other wall
mount brackets may result in an unstable installation and may cause serious injuries.
Mounting the LCD colour TV requires special skills and should only be performed by qualified service personnel. Customers
should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that
results in accident or injury.
•
•
•
You can ask qualified service personnel about using an optional bracket to mount the TV to a wall.
When you mount the TV on a wall, you should attach the supporting post.
When using wall mount bracket AN-37AG5
You can check the centre of the TV screen using the mark engraved on the wall mount bracket when mounting the TV
on the wall.
AN-37AG5
LC-32DH57E, LC-32DH57S: The centre of the TV screen is 24.5 mm above the mark “A” on the wall bracket.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick guide
5
6
Starting channel search.
Initial auto installation
Start
Skip
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings one
after another.
Press a/b to select “Start” or “Skip”, and then
press ;.
Confirm the following before turning on
the power
•
If you want to search for more broadcasts, execute
“Additional Search” from the “Programme Setup” menu
(Page 21).
E
E
Is the antenna cable connected?
Is the AC cord plugged in?
The TV searches for, sorts and stores all
the receivable TV stations according to
their settings and the connected antenna.
1
2
Press a on the TV.
•
The initial auto installation wizard appears.
•
To abort the initial auto installation in progress, press
RETURN.
Setting the OSD language.
NOTE
•
If you turn off the power on the TV after performing step 5 or
if you select “Skip” on step 5, the initial auto installation wizard
will not appear. The auto installation function allows you to
execute the installation again from the “Setup” menu (Page 20).
The initial auto installation wizard will go off if you leave the TV
unattended for 10 minutes before searching for channels in
step 6.
After initial auto installation is completed, the default PIN is
automatically set to “1234”. To change the PIN setting, refer to
Password/Parental lock settings (Page 22). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN (Page 24).
English
•
•
Português
Press a/b to select the desired language, and
then press ;.
3
Selecting the location of the TV.
•
When “Italy” is selected in the country setting, the default PIN is
automatically set to “1234” and the default age restriction value
is set to 18.
HOME
STORE
Checking signal strength
Press a/b to select where you will use this TV,
and then press ;.
If you install an antenna for the first time or relocate it, you
should adjust the alignment of the antenna to receive a
good reception while checking the antenna setup screen.
•
•
HOME: “STANDARD” will be the default value for the “AV
MODE” setting.
STORE: “DYNAMIC (Fixed)” will be the default value for
the “AV MODE” setting. If the “AV MODE” is changed,
the TV will automatically switch back to “DYNAMIC
(Fixed)” when there is no signal input from the TV or
remote control unit for 30 minutes.
1
Press @ and the “MENU” screen
displays.
2
3
Press c/d to select “Setup”.
Press a/b to select “Antenna Setup”, and
then press ;.
4
Setting the country.
Austria
Finland
4
Press a/b to select “Signal Strength”.
NOTE
•
The values of “Signal Strength” indicates when to check the
appropriate alignment of the antenna.
Press a/b to select your country or area, and
then press ;.
•
This setting screen only appears during the first
installation.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Daily operation
Selecting an external video
source
Switching on/off
Turning on/off the power
Once the connection is made,
INPUT SOURCE
TV
EXT1
EXT2
EXT3
press b to display the “INPUT
SOURCE” screen, and then press
b or a/b to switch over to
the appropriate external source
with ;.
Press a on the TV.
Switch it off by pressing a on the TV.
Standby mode
Selecting a sound mode
E To standby mode
E For DTV
If the TV is switched on, you can switch it to standby by
If multi sound modes are received, each time you press
pressing B on the remote control unit.
; the mode switches as follows.
E Switching on from standby
From standby, press B on the remote control unit.
Audio (ENG) : STEREO
L/R
L
R
LR
Audio (ENG) : CH A
Audio (ENG) : CH B
Audio (ENG) : MONO
TV indicator status
B (Standby/On
Status
indicator)
Off
Power off
Power on
Standby
Green
Red
Press c/d to select L or R sound when the STEREO or
DUAL MONO screen is displayed.
NOTE
•
If you are not going to use this TV for a long period of time, be
sure to remove the AC cord from the AC outlet.
A small amount of electric power is still consumed even when
a is turned off.
Audio (ENG) : STEREO
•
L/R
L
R
LR
NOTE
Switching between digital and
analogue broadcasts
•
•
The sound mode screen disappears in six seconds.
Selectable items vary depending on the received broadcasts.
E For ATV
Watching digital
broadcasts
Watching analogue
broadcasts
Each time you press ;, the mode switches as
shown in the following tables.
001 to 900 ch
From 901 ch
NICAM TV broadcasts selection
Signal
Selectable items
NOTE
Stereo
NICAM STEREO, MONO
NICAM CH A, NICAM CH B, NICAM CH AB, MONO
NICAM MONO, MONO
A2 TV broadcasts selection
Selectable items
•
If the TV cannot search digital broadcasts, the analogue
broadcasts are set from 001 channel.
Bilingual
Monaural
Changing channels
Signal
With :r/s:
With 0_9:
Stereo
STEREO, MONO
Bilingual
Monaural
CH A, CH B, CH AB
MONO
NOTE
•
When no signal is input, the sound mode will display “MONO”.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
EPG
EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of DTV/RADIO, view
detailed information about them, tune to an event currently on-air.
Basic Operation
The illustrations on this page are explained
using three digit channels.
EPG [DTV-TV]
Filter: All types
[Mon]19/5
[Mon]19/5 10:57
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
BBC ONE
10:00
11:00
City Hospital
BBC TWO
Big Strong Boys
BBC THREE
BBC FOUR
CBBC Channel
BBC
1
BB22
Prev
Next
Programme info.
Filter
BBC NEWS 24
BBCi
1
2
3
4
5
SIT
SIT
SIT
SIT
SIT
1
2
3
4
5
BBC ONE
E Display/Close the EPG
OK
6
EPG
: Back
screen
: Select
: Enter
: Exit
Prev
Next
Programme info.
Filter
2
3
4
5
Press EPG.
E Search for a programme on the main screen
1 Search for a channel and programme
1
Press a/b to select the channel you want to search, and then press d to move the cursor to
the programme table.
•
If a or b are displayed on the left of the channels, continue to press a/b to display next or previous screen.
2
Press a/b to select the desired programme, and then press ; to display the programme
information.
Searching for a programme using colour buttons on the remote control unit
2 Search for a programme on the
5 Search a programme in a category
previous day
1
2
Press the blue button.
Press the red button to move to the
programme table for the previous day.
Press d to select the desired filter
category.
•
Each time you press d, the filter category switches (e.g.,
3 Search for a programme on the next
“Movie”, “News”, etc.).
day
3
4
Press ; or the blue button to display the
programme table for the selected category.
Press the green button to move to the
programme table for the next day.
Press the blue button or RETURN to go
back to the EPG screen.
4 Check programme information
1
2
3
Press a/b to select the programme you
want to check.
Press the yellow button to display the
programme information.
Press the yellow button or RETURN to go
back to the EPG screen.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Teletext
Buttons for teletext operations
Buttons
Description
What is Teletext?
:r/s
Increase or decrease the page number.
Teletext broadcasts pages of information and
entertainment to specially equipped TV. Your TV receives
teletext signals broadcast by a TV network, and decodes
them into graphical format for viewing. News, weather
and sports information, stock exchange prices and
programme previews are among the many services
available.
Select a group or block of pages displayed in the
Colour (Red/Green/ coloured brackets at the bottom of the screen by
Yellow/Blue)
pressing the corresponding Colour (Red/Green/
Yellow/Blue) on the remote control unit.
Numeric buttons
0_9
Directly select any page from 100 to 899 by using
the 0_9 numeric buttons.
v (Top/Bottom/
Switch the teletext image to Top, Bottom or Full.
Full)
Turning Teletext on/off
k (Reveal hidden
Teletext)
Reveal or hide hidden information such as an
answer to a quiz.
1
Select a TV channel or external source
providing a teletext programme.
Stop updating teletext pages automatically or
release the hold mode.
3 (Freeze/Hold)
2
Press m to display the Teletext.
•
Many stations use the TOP operating system, while
some use FLOF (e.g., CNN). Your TV supports both
these systems. The pages are divided into topic groups
and topics. After switching on the teletext, up to 2,000
pages are stored for fast access.
Display the subtitle or exit the subtitle screen.
[ (Subtitle for
Teletext)
•
Subtitles will not be displayed when the service
does not contain subtitle information.
Reveal or hide subpages.
•
•
•
Red button: Move to the previous subpage.
Green button: Move to the following subpage.
These two buttons are shown on the screen by
the symbols “e” and “f”.
•
•
If you select a programme with no teletext signal, “No
Teletext available” displays.
The same message displays during other modes if no
teletext signal is available.
1 (Subpage)
Using the MHEG-5 application
(UK only)
TELETEXT
TELETEXT
Some services bring you programmes with the MHEG
application encoded, letting you experience DTV
interactively. When provided, the MHEG-5 application will
start when you press m.
•
•
Each time you press m, the screen switches as shown
above.
Press m again to display the teletext on the right screen
and the normal image on the left screen.
Teletext Language
If teletext information is not displayed correctly, select the
language type from among nine kinds of language tables;
“West Europe”, “East Europe”, “Russia”, “Russia-2”,
“Greek”, “Turkey”, “Arab/Hbrw”, “Farsian”, or “Arab”.
1
Go to “MENU” > “Digital Setup” > “Teletext
Language” > “Decode Page Lang.”.
2
Press c/d to select a receivable teletext
broadcasting language in your area, and
then press ;.
NOTE
•
Teletext can be displayed only when it is sent by a network. Not
used to convert between languages.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting external devices
E Before connecting ...
•
•
•
Be sure to turn off the TV and any devices before making any connections.
Firmly connect a cable to a terminal or terminals.
Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible
audiovisual quality to maximise the potential of the TV and the connected device.
Refer to page 25 for connecting a PC to the TV.
•
NOTE
•
The cables illustrated in pages 13_15 are commercially available items.
Video connections
AQUOS LINK functions
One touch play
HDMI connection
When images are played back from the connected HDMI
device, the TV will automatically switch to the appropriate
input source.
Example of connectable devices
E
E
E
DVD player/recorder
Blu-ray player/recorder
Game console
Standby
When the TV enters standby mode, the connected HDMI
device enters standby mode as well.
The HDMI connections permit digital video and
audio transmission via a connection cable from a
player/recorder. The digital picture and sound data are
transmitted without data compression and therefore lose
none of their quality. Analogue/digital conversion is no
longer necessary in the connected devices, which also
would result in quality losses.
NOTE
•
The availability of the AQUOS LINK function depends on the
HDMI device used. Depending on the manufacturer and type of
equipment used, it is possible that the described functions may
be completely or partially unusable.
DVI/HDMI conversion
Using a DVI/HDMI cable, the digital video signals of
a DVD can also be played via the compatible HDMI
connection. The sound must be fed in additionally.
•
When connecting a DVI/HDMI cable to the HDMI terminal, the
image may not come in clearly.
ꢂ
E When using the HDMI 2 terminal
You must set the audio signal input source
depending on the type of HDMI cable connected
(Refer to page 19 for details).
ꢀ
ꢁ
HDMI-certified cable
Go to “MENU” > “Option” > “PC
Audio Select” > select “EXT 4 (RGB)”.
DVI/HDMI cable
n HDMI-certified cable
o ø 3.5 mm stereo minijack cable
p DVI/HDMI cable
Go to “MENU” > “Option” > “PC
Audio Select” > select “HDMI 2”.
Controlling HDMI devices using AQUOS LINK
Set to “On” to enable interactive operation of compatible
HDMI devices (AV amplifiers, DVD player/recorders, Blu-
ray player/recorders).
NOTE
•
Video noise may occur depending on the type of HDMI cable
used. Make sure to use a certified HDMI cable.
•
When playing the HDMI image, the best possible format for the
picture will be detected and set automatically.
AQUOS LINK Control
Supported video signal:
576i, 576p, 480i, 480p, 1080i, 720p, 1080p
See page 28 for PC signal compatibility.
Go to “MENU” > “Option” > “AQUOS LINK
Control” > select “On”.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting external devices
Y
PB
(CB)
PR
(CR)
Component connection
SCART connection
Example of connectable devices
Example of connectable devices
E
E
E
VCR
E
Decoder
DVD player/recorder
Blu-ray player/recorder
E EXT 1 (RGB) terminal
You will enjoy accurate colour reproduction and high
quality images through the EXT 3 terminal when
connecting a DVD player/recorder or other device.
ꢄ
ꢆ
ꢃ
R
L
Y
P
P
R
(CB (CR
)
B
)
t SCART cable
AUDIO
COMPONENT
Example of connectable devices
q Audio cable
r Component cable
E
E
VCR
DVD player/recorder
VIDEO connection
E EXT 2 (AV) terminal
Example of connectable devices
E
E
E
E
VCR
DVD player/recorder
Game console
Camcorder
You can use the EXT 8 terminal when connecting to a
game console, camcorder, a DVD player/recorder or
other device.
ꢆ
ꢅ
t SCART cable
NOTE
•
Do not connect a decoder to the EXT 2 terminal.
s AV cable
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting external devices
Audio connections
Speaker/amplifier connection
Connect an amplifier with external speakers as shown below.
E Connecting an amplifier with digital
E Connecting an amplifier with
analogue audio input
audio input
ꢇ
R
L
R
L
DIGITAL AUDIO IN
AUX1 IN
AUX OUT
u Optical audio cable
v Audio cable
E After connecting
Digital audio output setting
After connecting an amplifier with digital audio input and external speakers as shown, you should set an audio
output format compatible with the programme you are watching or the device connected.
Go to “MENU” > “Option” > “Digital Audio Output” > select “PCM” or “Dolby Digital”.
NOTE
•
When set to “Dolby Digital”, Dolby Digital is output when the Dolby Digital or Dolby Digital Plus audio formats are received. When
set to “PCM”, PCM is output no matter what audio formats are received.
•
Some audio formats such as HE-AAC cannot be output as Dolby Digital.
Inserting the CA Card into the CI Module
Checking CI Module information
Go to “MENU” > “Digital Setup” > “CI Menu”.
•
The content of this menu depends on the provider of the CI Module.
Module
General information on CI Module displays.
Menu
Adjustment parameters of each CA Card displays.
1
2
Carefully insert the CI Module in
the CI slot with the contact side
forward.
The logo on the CI Module must
be facing outward from the rear
of the TV.
Enquiry
You can input numerical values such as passwords here.
NOTE
•
Make sure that the CI Module is properly inserted.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operation
What is the MENU?
•
•
You need to call up the OSD to perform settings for the TV. The OSD for the settings is called “MENU”.
The “MENU” enables various settings and adjustments.
Basic Operation
Display the MENU
Screen
Select an item
Press a/b/c/d to select/adjust
the desired menu, and adjust the item
to the desired level, and then press
;. Press RETURN to return to the
previous “MENU” page.
Press @ and the “MENU” screen
displays.
Picture
DYNAMIC
OPC
Selecting in the MENU
[Off]
+16
+40
+16
+30
+30
+7
Backlight
Contrast
Brightness
Colour
[+14] –16
[+30]
[0]
0
–16
–30
–30
0
[0]
Tint
[0]
Sharpness
Advanced
Reset
[0]
ECO
Energy Save
[Off]
[Disable]
[Disable]
No Signal Off
No Operation Off
Selecting options
Exit the MENU screen
On
The operation will exit the “MENU”
screen if you press > before it is
completed.
NOTE
•
•
•
“MENU” options differ in the selected input modes, but the operating procedures are the same.
Items with 4 cannot be selected for various reasons.
The “MENU” screen will disappear if left unattended for several seconds.
Operation without a remote control unit
This function is useful when there is no remote control unit within your reach.
1
2
3
Press @ and the “MENU” screen displays.
Press :r/s instead of a/b or i+/- instead of c/d to select the item.
Press b to complete the setting.
About the Guide Display
The Guide Display at the bottom of the screen shows operations with the
OSD.
OK
6
MENU
: Select
: Enter
: Back
: End
•
The bar above is an operational guide for the remote control unit. The bar will
change in accordance with each menu setting screen.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment
Picture
Picture Settings
Advanced
Picture
This TV provides various advanced functions for
optimising the picture quality.
DYNAMIC
OPC
[Off]
+16
+40
+16
+30
+30
+7
Backlight
Contrast
Brightness
Colour
[+14] –16
Picture
[+30]
[0]
0
–16
–30
–30
0
DYNAMIC
Colour Temp.
Film Mode
Active Contrast
DNR
High
[0]
[On]
[On]
Tint
[0]
Sharpness
Advanced
Reset
[0]
[Middle]
+16
OPC Max.
OPC Min.
[0]
[0]
–16
–16
+16
Picture
Colour Temp.
OPC
Adjusts the colour temperature to give the best white
image.
Automatically adjusts the brightness of the screen.
Item
Item
High
White with bluish tone.
Displays the OPC effect on the screen while
On:Display
adjusting the brightness of the screen.
Mid-High
Middle
Mid-Low
Low
Intermediate tone between “High” and “Middle”.
Natural tone.
On
Off
Automatically adjusts.
The brightness is fixed at the value set in
“Backlight”.
Intermediate tone between “Middle” and “Low”.
White with reddish tone.
NOTE
•
When set to “On”, the TV senses the surrounding light and
automatically adjusts the backlight brightness. Make sure no
object obstructs the OPC sensor, which could affect its ability
to sense surrounding light.
Film Mode
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending on
the vertical frequency), analyses it and then recreates
each still film frame for high-definition picture quality.
Picture
Picture adjustments
Active Contrast
Adjusts the picture to your preference with the following
picture settings.
Automatically adjusts the contrast of an image according
to the scene.
Adjustment items
DNR
Selectable
items
c (Cursor)
d (Cursor)
“DNR” produces a clearer image (“Off”, “High”, “Middle”,
“Low”).
Backlight
The screen dims
The screen brightens
For more contrast
Contrast
Brightness
Colour
For less contrast
NOTE
For less brightness
For less colour intensity
For more brightness
For more colour intensity
•
This function may not be available depending on the input
signal type.
Skin tones become
purplish
Skin tones become
greenish
Tint
Sharpness
For less sharpness
For more sharpness
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment
Range of OPC
Audio Settings
The brightness level range of the OPC sensor’s automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to a
maximum of e 16 and a minimum of f 16.
Audio
DYNAMIC
Treble
[0]
[0]
[0]
–15
–15
L
+15
+15
Bass
NOTE
•
•
•
•
•
This function is available only when the “OPC” setting is set to
“On” or “On:Display”.
The maximum setting cannot be set to a smaller number than
the minimum setting.
The minimum setting cannot be set to a bigger number than
the maximum setting.
The maximum and minimum settings cannot be set to the
same number.
Balance
Surround
Type
R
[Off]
[Normal]
Audio Description
Reset
Depending on the brightness of the surrounding light, the OPC
sensor might not operate if the adjustment range is small.
Audio
Audio adjustment
AV MODE
“AV MODE” gives you several viewing options to choose
from to best match the system environment, which
can vary due to factors like room-brightness, type of
programme watched or the type of image input from
external equipment.
You can adjust the sound quality to your preference with
the following settings.
Selectable
items
c (Cursor)
d (Cursor)
Treble
Bass
For weaker treble
For weaker bass
For stronger treble
For stronger bass
1
2
Press #.
Each time you press #, the mode
changes.
Decrease audio from the
right speaker
Decrease audio from the
left speaker
Balance
•
You can also switch the mode on the “Picture” and
“Audio” menu screen by pressing #.
Audio
Item
Surround
For a highly defined image in a normally bright
room.
STANDARD
This function allows you to enjoy realistic live sound.
MOVIE
GAME
PC*
For viewing a movie in a darkened room.
For playing of video games.
For PC.
Allows you to customise settings as desired. You
can set the mode for each input source.
USER
For a clear-cut image emphasising high contrast
for sports viewing (The “Picture” and “Audio”
settings cannot be adjusted).
DYNAMIC (Fixed)
DYNAMIC
NOTE
For a clear-cut image emphasising high contrast
for sports viewing.
•
The item marked with * is available only when selecting “HDMI
1”, “HDMI 2”, “HDMI 3” or “EXT 4” from the “INPUT SOURCE”
menu.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment
Audio
Outputting audio only
Type
Option
Item
Audio Only
Normal
Audio stream is output normally.
Selecting this item enables you to adjust the
settings for the visually impaired (see below).
When listening to music from a music programme, you
can set the TV off and enjoy audio only.
Audio Description
Audio for the hearing impaired is output on the
TV speakers by default when the programme
contains audio information.
Hard of Hearing
Item
Off
On
Both screen images and audio are output.
Audio is output without a screen image.
Audio
Audio Description
Setting audio input
Available only when you set “Audio Description” in the
“Type” menu above.
Option
PC Audio Select
Item
When set to “On”, audio for the visually impaired
is output from the TV speakers.
Speaker
When using the EXT 4 terminal or HDMI 2 terminal, you
must select which terminal uses the AUDIO (R/L) jack for
analogue audio input.
When set to “On”, audio for the visually impaired
Headphone
is output from the headphone terminal.
Adjust the volume of the speakers or
headphones.
Item
Volume
When connecting devices (including a PC) with
DVI/HDMI cable to the HDMI 2 terminal and
inputting analogue audio signals from the AUDIO
HDMI 2
Automatic volume adjustment
(R/L) jack*.
When connecting a PC to the EXT 4 terminal,
EXT 4 (RGB)
and inputting analogue audio signals from the
AUDIO (R/L) jack.
Option
Auto Volume
*
HDMI signals have priority when the signal includes audio.
NOTE
Different sound sources sometimes do not have the
same volume level, such as a programme and its
commercial breaks. The Automatic Volume Control (Auto
Volume) reduces this problem by equalizing levels.
•
You must set this to “EXT 4 (RGB)” when connecting devices
(including a PC) with an HDMI-certified cable to the HDMI 2
terminal. If “HDMI 2” is set, there will be no sound output.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment
Power Save Settings
Channel Settings
ECO
Auto Installation
Energy Save
[Standard]
No Signal Off
No Operation Off
[Disable]
[Disable]
Setup
Auto Installation
ECO
The TV automatically detects and stores all available
channels in your area. This function also allows you to
perform the channel setting for digital and analogue
individually and reconfigure the settings after the initial
auto installation has been completed.
Energy Save
This function enables you to automatically reduce the
backlight brightness in order to decrease the power
consumption and increase the backlight life span.
After selecting “Yes” on the screen, you
can set language and channel search the
same as in the initial auto installation.
Item
The backlight brightness is the same value of
your settings in the selected “AV MODE”.
Off
NOTE
•
PIN input is required when executing “Auto Installation”. The
default PIN is “1234”. To change the PIN setting, refer to
Password/Parental lock settings (Page 22). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN (Page 24).
Standard
Advanced
Reduces the backlight brightness by 20 %.
Reduces the backlight brightness by 30 %.
NOTE
•
This function does not work when “AV MODE” is set to
“DYNAMIC (Fixed)”.
•
You cannot set the Home/Store setting and the country
setting in “Auto Installation” in the “Setup” menu. If you want
to reconfigure those settings, automatically execute initial auto
installation after executing “Reset” from the “Setup” menu.
E “Energy Save” status icons
Icon
Description
Channel detail settings
“Energy Save” is set to “Standard”.
Setup
“Energy Save” is set to “Advanced”.
Programme Setup
ECO
You can reconfigure the DTV/ATV channel settings
automatically or manually.
No Signal Off
NOTE
•
PIN input is required when executing “Programme Setup”.
The default PIN is “1234”. To change the PIN setting, refer to
Password/Parental lock settings (Page 22). To clear the PIN
setting (PIN input will no longer be needed), refer to CLEARING
THE PIN (Page 24).
When set to “Enable”, the TV will automatically enter
standby mode if there is no signal input for 15 minutes.
ECO
No Operation Off
The TV will automatically enter standby mode if no
operations are performed during the time span you set
(“30 min.” or “3 hr.”).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment
Additional Search
Channel Skip
Use this menu to add new channels automatically after
auto installation has been completed.
Channels with a ✔ mark are passed over when pressing
:r/s on the TV or remote control unit.
1
2
Press a/b to select the desired channel.
Press ; to set a ✔ mark at the channel that
you want to skip.
Channel Edit
This menu allows you to reconfigure some settings for
the channel currently selected.
Channel Sort
The item position of channels can be sorted.
Label
1
Press a/b to select the channel whose item
position you want to move, and then press
;.
When a TV channel sends its Network Name, the “Auto
Installation” detects the information and assigns a
name to it. However, you can change channel names
individually.
Channel
Number
Channel
Name
Channel
Sort
✔
DTV
DTV
006
007
Monosco 576-1
Monosco 576-2
1
Press a/b/c/d to select each character
of the new name for the channel, and then
press ;.
2
3
Press a/b to move it to the desired position,
and then press ;.
2
Repeat step 1 above until the name is fully
spelt out.
Channel
Number
Channel
Name
Channel
Sort
DTV
DTV
006
007
Monosco 576-2
Monosco 576-1
NOTE
•
•
The name can be six characters or less.
If a channel name is less than six characters, select “END” to
set the channel name.
Repeat steps 1 and 2 until all desired channel
items are sorted.
Decoder
Frequency
When connecting a decoder to the TV, you need to select
channels that need to be decoded.
You can adjust the frequency to the desired position (only
for analogue channels).
NOTE
Channel Lock
•
•
Adjust while checking the background picture as a reference.
You can set the frequency by pressing c/d. Each time you
press c or d, the value is changed in increments of 0.05 MHz.
When the channel is locked, you must enter your PIN
whenever you tune to the channel.
Colour System
NOTE
•
•
See “Child Lock” for setting a PIN.
Select the optimum colour system to receive (“Auto”,
“PAL”, “SECAM”, “NTSC”) (only for analogue channels).
When “Channel Lock” is set for a channel, “Child lock has been
activated” displays, and the image and sound of the channel
are blocked.
•
When pressing RETURN while “Child lock has been activated”
displays, the PIN input window will display. Inputting the correct
PIN unlocks the “Child Lock” temporarily until the power is
turned off.
Sound System
Select the optimum sound systems (Broadcasting
systems) to receive (“B/G”, “A2 B/G”, “D/K”, “A2 D/K”,
“A2 D/K1”, “I”, “L”, “L’”) (only for analogue channels).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment
Digital Setup
Password/Parental lock settings
Subtitle
Setup
Set up to two preferred subtitle languages (including
subtitles for the hearing impaired) to display if subtitles
are available.
Child Lock
Allows you to use a PIN to protect certain settings from
being accidentally changed.
Selectable items
E
E
E
1st Language
2nd Language
For hearing impaired
NOTE
•
PIN input is required when executing “Child Lock”. The default
PIN is “1234”. To clear the PIN setting (PIN input will no longer
be needed), refer to CLEARING THE PIN (Page 24).
E Switching subtitle languages
Each time you press [ on the remote control unit, the
Change PIN
subtitle switches.
Register a four-digit password number to use the “Child
Lock” function.
Off
1st Language
1
Enter the four-digit number as a PIN using
0_9 numeric buttons.
• • • • • •
2nd Language
2
Enter the same four-digit number as in step
1 to confirm.
E Set “For hearing impaired” to “Yes”
NOTE
Subtitles for the hearing impaired have priority over each
of the subtitle language settings (e.g., “1st Language”,
“2nd Language”, etc.).
•
To view a locked channel, you must enter the PIN (See page 21
for locking channels). When you select a locked channel, a PIN
prompt message pops up. Press RETURN to display the PIN
input window.
EXAMPLE
1st Language
(For hearing impaired)
1st Language
Cancel PIN
Allows you to reset your PIN.
NOTE
NOTE
•
Subtitles will not be displayed when the programme does not
contain subtitle information.
•
As a precautionary measure, make a note of your PIN on
the back of this operation manual, cut it out and keep it
in a safe place that children cannot reach.
Option
Digital Audio Language
Parental rating
This function allows DTV channels to be restricted. It
prevents children from watching violent or sexual scenes
that may be harmful.
Select the preferred language from “1st Digital Audio
Language” (“2nd Digital Audio Language”) to set up
the first (second) priority language for digital audio.
This setting is effective only when more than one audio
language is available.
NOTE
•
“Universal viewing” and “Parental approval pref.” are ratings
used exclusively in France.
E Switching the multi audio languages
•
Refer to page 32 for details about ratings.
Each time you press ; on the remote control
unit, the audio language switches.
Language Settings
NOTE
•
You can set up to two preferred multi audio languages if the
audio languages are available.
Setup
Language
You can select an OSD language from the “Setup”
menu. Select from among 23 languages. Refer to the
OSD language column in the specification table for the
selectable languages (Page 30).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful viewing functions
Display Settings
Channel display
Selecting the picture size
You can select the picture size. Selectable picture size
varies with the type of signal received.
Item (for SD [Standard-Definition] signals)
You can display the channel information by pressing p
on the remote control unit.
This mode allows the TV to switch automatically
among the different picture sizes.
Auto
For DTV
For ATV
Keeps the original aspect ratio in a full screen
display.
Normal
BBC2
BBC1
For 14:9 letterbox pictures. A thin side bar
appears on each side, and you may also
see bars on the top and bottom with some
programmes.
TV
TV
001
901
Audio : MONO
Video : PAL
Zoom 14:9
Audio (ENG) : STEREO
Dolby Digital Plus
Video : 1080i
In this mode, the picture is stretched toward
each side of the screen. The picture may appear
similar to “Full” depending on broadcast signals.
Subtitle : ENG 1/3
Panorama
*
Four digit numbers (e.g., 0001) are displayed after selecting the
five Nordic countries in the country setting.
Full
For 16:9 squeeze pictures.
For 16:9 letterbox pictures. Bars may appear on
the top and bottom with some programmes.
Cinema 16:9
E Time display in channel information
You can display the time information included in DTV and
teletext broadcasts.
For 14:9 letterbox pictures. Bars may appear on
the top and bottom with some programmes.
Cinema 14:9
1
2
Select a TV channel.
Press p. The channel display will appear on the
Item (for HD [High-Definition] signals)
TV.
This mode allows the TV to switch automatically
among the different picture sizes.
Auto
Full
•
Each time you press p, the display format of the time display
and the channel information switches.
Displays with an Overscan image. Crops all
sides of screen.
Time and Title display
Displays with an Underscan image. Displays with
the High-Definition image adjusted optimally.
Noise may appear on the edge of the screen
with some programmes.
Underscan
Option
Displays an image with the same number of
pixels on the screen.
Dot by Dot
Programme Title Display
NOTE
This function allows you to display programme
information such as the title and airtime by tuning a
channel.
•
Some items do not appear depending on the type of received
signal.
1
Press f.
•
•
The “WIDE MODE” menu displays.
The menu lists the “WIDE MODE” options selectable for
the type of video signal currently received.
Digital Setup
Time Zone
2
Press f or a/b while the “WIDE MODE”
menu displays on the screen.
Set up the proper time zone in your area.
•
As you toggle the options, each is immediately reflected
on the screen. There is no need to press ;.
Basically, if you set “Auto” in the “WIDE
MODE” menu, the optimum “WIDE MODE”
is automatically chosen for every broadcast
or programme played using a VCR or DVD
player/recorder.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Other useful features
Setting when using external
devices
Reset
Setup
Input source settings
Reset
Setup
If complex adjustments are made so that the settings
cannot be restored to normal, you can reset the settings
to the factory preset values.
Input Label
1
2
Go to “MENU” > “Setup” > “Reset”.
You can label each input source with a custom
description.
Press c/d to select “Yes”, and then press
;.
1
Press b to select the desired input
source.
•
After the reset has completed, the power shuts off and
then comes back on. The screen will have returned to its
original settings.
2
3
Go to “MENU” > “Setup” > “Input Label”.
NOTE
Press a/b/c/d to select each character
of the new name for the input source, and
then press ;.
•
PIN input is required when executing “Reset”. The default
PIN is “1234”. To change the PIN setting, refer to Password/
Parental lock settings (Page 22). To clear the PIN setting (PIN
input will no longer be needed), refer to CLEARING THE PIN
(Page 24).
DVD
A
K
U
0
B
L
V
1
C
M
W
2
D
N
X
3
E
O
Y
4
F
P
Z
5
G
Q
+
H
R
–
I
S
.
J CLEAR
T BACK
_
Identification
Setup
6
7
8
9 END
Identification
4
Repeat until the label is fully spelt out.
NOTE
You can check the TV ID on the screen for reporting to
customer service.
•
•
The label can be six characters or less.
When you want to set an input source label of less than six
characters, select “END” to set the name.
Software update
INPUT SOURCE
TV
If you use DVB-T, the TV automatically receives the
update service and updates new software. When a
confirmation message is received about the software
update on the screen, follow the screen prompts.
EXT1
DVD
EXT3
CAUTION
NOTE
•
Do not disconnect the AC cord when the software update
is in progress. If you have the problem, ask qualified service
personnel.
•
You cannot change labels if the input source is “TV”.
Skipping specified inputs
CLEARING THE PIN
Setup
If you lose or forget your PIN, you can clear the PIN
following these steps.
Input Skip
1
2
Go to “MENU” > “Setup” > “Child Lock”.
This setting allows you to set the input source you want
to skip during “INPUT SOURCE” selection operations.
Enter the four-digit number on page 32 to
clear your PIN.
EXT1
EXT2
EXT3
[Yes]
[No]
[No]
NOTE
•
As a precautionary measure, make a note of your PIN on the
back of this operation manual, cut it out and keep it in a safe
place that children cannot reach.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a PC
NOTE
Connecting a PC
•
•
•
The PC input terminals are DDC1/2B-compatible.
Refer to page 30 for a list of PC signals compatible with the TV.
When connecting to a PC, the input signal type is automatically
detected.
HDMI Connection
PC
HDMI 1, 2 or 3
Displaying a PC image on the
screen
ꢀ
Selecting the picture size
n HDMI-certified cable
You can select the picture size.
PC
HDMI 2*
1
Press f.
•
The “WIDE MODE” menu displays.
2
Press f or a/b to select a desired item.
ꢁ
ꢂ
EXAMPLE
o DVI/HDMI cable
p ø 3.5 mm stereo
minijack cable
*
When using the HDMI 2 terminal, you must select the proper
item in the “PC Audio Select” menu depending on the type of
HDMI cable connected (Refer to page 19 for details).
Normal
Full
Item
Analogue Connection
Full
An image fully fills the screen.
For letterbox pictures. Bars may appear on the
top and bottom with some programmes.
Cinema
PC
EXT 4*
Keeps the original aspect ratio in a full screen
display.
Normal
ꢃ
Displays an image with the same number of
pixels on the screen.
Dot by Dot
ꢄ
NOTE
•
•
•
Connect the PC before making adjustments.
Selectable picture size may vary with input signal type.
Refer to page 23 for AV signals.
HDMI: 480i/480p/576i/576p/720p/1080i/1080p
ANALOGUE RGB: 576p/720p (60 Hz)/1080i/1080p
q RGB cable
PC
r ø 3.5 mm stereo
minijack cable
EXT 4*
ꢅ
ꢆ
s DVI/RGB conversion t ø 3.5 mm stereo
cable minijack cable
*
When using the EXT 4 terminal, you must select “EXT 4 (RGB)”
in the “PC Audio Select” menu (Refer to page 19 for details).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a PC
Adjusting the PC image
automatically
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as necessary
to change image position using “Auto Sync.”. In some
cases, however, manual adjustment is needed to
optimise the image.
This function enables the screen to be automatically
adjusted to its best possible condition when the analogue
terminals of the TV and PC are connected with a
commercially available DVI/RGB conversion cable, etc.
Setup
Setup
Fine Sync.
Auto Sync.
1
2
Press a/b to select the specific
adjustment item.
NOTE
•
“Auto Sync.” may fail if the PC image has low resolution, has
unclear (black) edges, or is moved while executing “Auto
Sync.”.
Press c/d to adjust the item to the
desired position.
•
•
Be sure to connect the PC to the TV and switch it on before
starting “Auto Sync.”.
“Auto Sync.” can be executed only when inputting analogue
signals through the EXT 4 terminal.
[ 0]
[-5]
H-Pos.
V-Pos.
-30
-20
-15
-15
b30
b20
b15
b15
Clock [ 0]
[ 0]
Phase
Item
Centres the image by moving it to the left or
right.
H-Pos.
V-Pos.
Clock
Centres the image by moving it up or down.
Adjusts when the image flickers with vertical
stripes.
Adjusts when characters have low contrast or
when the image flickers.
Phase
NOTE
•
For resetting all adjustment items to the factory preset values,
press a/b to select “Reset”, and then press ;.
“Clock” and “Phase” in the “Fine Sync.” menu can be adjusted
only when inputting analogue signals through the EXT 4
terminal.
•
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a PC
Parameter
RS-232C port specifications
Input the parameter values, aligning left, and fill with
blank(s) for the remainder (Be sure that four values are
input for the parameter).
PC Control of the TV
•
When a programme is set, the TV can be controlled
from the PC using the RS-232C terminal. The input
signal (PC/video) can be selected, the volume can be
adjusted and various other adjustments and settings
can be made, enabling automatic programmed
playing.
When the input parameter is not within an adjustable
range, “ERR” returns (Refer to “Response code format”).
0
0
1
0
0
0
0
0
0
5
9
5
•
Use an RS-232C serial control cable (cross type)
(commercially available) for the connections.
NOTE
•
This operation system should be used by a person
who is accustomed to using PCs.
When “?” is input for some commands, the present
setting value responds.
?
?
?
?
Response code format
RS-232C serial control cable (cross type)
Normal response
Communication conditions
Set the RS-232C communications settings on the PC
to match the TV’s communications conditions. The TV’s
communications settings are as follows:
O
K
Return code (0DH)
Baud rate:
Data length:
Parity bit:
9,600 bps
Problem response (communication error or incorrect
command)
8 bits
None
E
R
R
Stop bit:
1 bit
Flow control:
None
Return code (0DH)
Communication procedure
Send the control commands from the PC via the RS-
232C connector.
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time. Wait
until the PC receives the OK response before sending the
next command.
Make sure to send “A” with the carriage return and
confirm that “ERR” returns before operating.
Command format
Eight ASCII codes +CR
C1 C2 C3 C4 P1 P2 P3 P4
n
o
p
n Command four digits: Command. The text of four
characters.
o Parameter four digits: Parameter 0_9, blank, ?,
minus
p Return code (0DH): ?
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a PC
PC compatibility chart
Horizontal
Frequency
Vertical
Frequency
Analogue (D-
Sub)
Resolution
Digital (HDMI)
VESA Standard
VGA
SVGA
XGA
640 x 480
800 x 600
31.5 kHz
37.9 kHz
48.4 kHz
47.7 kHz
47.7 kHz
64.0 kHz
65.3 kHz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1,024 x 768
1,280 x 768
1,360 x 768
1,280 x 1,024
1,400 x 1,050
WXGA
WXGA
SXGA
SXGA+
✔
✔
✔
NOTE
VGA, SVGA, XGA, WXGA, SXGA and SXGA+ are
registered trademarks of International Business
Machines Corporation.
•
This TV has only limited PC compatibility, correct operation can
only be guaranteed if the video card conforms exactly to the
VESA 60 Hz standard. Any variations from this standard will
result in picture distortions.
RS-232C command list
CONTROL ITEM
COMMAND
PARAMETER
CONTROL CONTENTS
CONTROL ITEM
COMMAND
PARAMETER
CONTROL CONTENTS
POWER
SETTING
P
I
O
T
W
G
R
D
0
_
_
_
_
_
_
_
POWER OFF
WIDE MODE
W
W
W
W
W
W
W
M
M
M
A
I
I
D
D
D
D
D
D
D
T
E
E
0
1
2
3
4
5
6
0
1
2
0
1
2
0
1
2
3
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
TOGGLE (AV)
NORMAL (AV)
ZOOM 14:9 (AV)
PANORAMA (AV)
FULL (AV)
INPUT
SELECTION A
INPUT SWITCHING
(TOGGLE)
I
E
I
E
I
I
T
V
V
D
D
_
*
_
_
_
_
_
_
TV (CHANNEL FIXED)
I
E
A
EXT 1_4, 8 (1_4, 8),
HDMI 1_3 (5_7)
I
E
CINEMA 16:9 (AV)
CINEMA 14:9 (AV)
TOGGLE
CHANNEL
D
D
D
C
C
C
C
C
C
H
H
H
*
*
*
*
*
*
_
*
THREE DIGIT DIRECT
CHANNEL (1_999) (Non-
Nordic countries)
I
E
MUTE
U
U
U
C
C
C
F
F
F
F
E
T
E
MUTE ON
FOUR DIGIT DIRECT
CHANNEL (1_9999)
(Nordic countries only)
T
E
MUTE OFF
SURROUND
SLEEP TIMER
S
S
S
T
U
U
U
M
M
M
M
SURROUND TOGGLE
SURROUND ON
SURROUND OFF
OFF
?
?
?
?
Reply current TV channel
number
A
A
C
C
A
A
A
A
A
A
A
A
A
V
A
H
H
V
V
V
V
V
V
V
V
V
O
C
U
D
P
W
D
D
D
D
D
D
D
D
D
M
A
_
_
0
1
2
3
4
5
6
7
?
*
_
_
_
_
_
_
_
_
_
_
?
*
_
_
_
_
_
_
_
_
_
_
?
_
_
_
_
_
_
_
_
_
_
_
_
?
_
_
CHANNEL UP
CHANNEL DOWN
TOGGLE
O
O
O
O
T
SLEEP TIMER 30 MIN
SLEEP TIMER 1 HOUR
AV MODE
SELECTION
M
M
M
M
M
M
M
M
M
L
T
STANDARD
MOVIE
T
SLEEP TIMER 1 HOUR
30 MIN
GAME
O
O
F
F
T
T
M
M
4
5
_
_
_
_
_
_
SLEEP TIMER 2 HOUR
USER
SLEEP TIMER 2 HOUR
30 MIN
DYNAMIC (Fixed)
DYNAMIC
PC
TEXT
T
T
E
E
C
X
X
P
T
T
0
1
*
_
_
*
_
_
*
_
_
_
TEXT OFF
TEXT ON (TOGGLE)
1_7
D
G
DIRECT PAGE JUMP
(100_899)
VOLUME
VOLUME (0_60)
TOGGLE
AUDIO
H
_
_
CHANGE
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Problem
Possible Solution
•
No power.
•
•
•
Check if you pressed B on the remote control unit. If the indicator on the TV lights up red, press B.
Is the AC cord disconnected?
Check if you pressed a on the TV.
•
•
The TV cannot be operated.
•
External influences such as lightning, static electricity, etc., may cause improper operation. In this case, operate
the TV after first turning off the power, or unplugging the AC cord and re-plugging it in after one or two minutes.
Remote control unit does not operate.
•
•
•
•
Are batteries inserted with polarity (e, f) aligned?
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminating to the remote control sensor?
•
•
Picture is cut off.
•
•
Is the image position correct?
Are screen mode adjustments (WIDE MODE) such as picture size made correctly? (Pages 23 and 25)
Strange colour, light colour, or dark colour,
or colour misalignment.
•
•
•
Adjust the picture tone.
Is the room too bright? The picture may look dark in a room that is too bright.
Check the “Colour System” setting (Page 21).
•
•
Power is suddenly turned off.
No picture.
•
•
•
The TV’s internal temperature has increased. Remove any objects blocking the vent or clean.
Is sleep timer set? Set to “Off” by pressing SLEEP on the remote control unit (Page 3).
Is “No Signal Off” or “No Operation Off” activated?
•
•
•
•
•
•
Are connections to external equipment correct? (Pages 13_14)
Is the correct input source selected? (Page 10)
Is a non-compatible signal being input? (Page 28)
Is the picture adjustment correct? (Pages 17_18)
Is the antenna connected properly? (Page 8)
Is “On” selected in “Audio Only”? (Page 19)
•
•
No sound.
•
•
•
•
Is the volume too low?
Make sure that headphones are not connected.
Check if you pressed e on the remote control unit.
Is the proper item selected in the “PC Audio Select” menu when connecting devices to the HDMI 2 terminal or
the EXT 4 terminal? (Pages 13 and 19)
The TV sometimes makes a cracking
sound.
•
This is not a malfunction. This happens when the cabinet slightly expands and contracts according to changes
in temperature. This does not affect the TV’s performance.
Cautions regarding use in high and low temperature environments
•
When the TV is used in a low temperature space (e.g., room, office), the picture may leave trails or appear slightly delayed. This is not
a malfunction, and the TV will recover when the temperature returns to normal.
•
Do not leave the TV in a hot or cold location. Also, do not leave the TV in a location exposed to direct sunlight or near a heater, as this
may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: e 5 °C to e 35 °C.
Information on the software license for this product
Software composition
The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by
third parties.
Software developed by SHARP and open source software
The copyrights for the software components and various relevant documents included with this product that were developed or written
by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also
makes use of freely distributed software and software components whose copyrights are held by third parties. These include software
components covered by a BSD-like License or other license agreement.
We are unable to answer any questions about the source code for the open source software. The source code for the software
components whose copyrights are held by SHARP is not distributed.
Acknowledgements
The following open source software components are included in this product:
• Freetype • unicode • Teletext font • libpng • zlib
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
Item
LCD COLOUR TV (32 o), LC-32DH57E, LC-32DH57S
Advanced Super View & BLACK TFT LCD (32 o)
1,049,680 pixels (1,366 x 768)
LCD panel
Resolution
Video Colour System
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
CCIR (B/G, I, D/K, L/L’)
Analogue
Digital
TV-Standard
DVB-T (2K/8K OFDM)
VHF/UHF
CATV
IR A ch_E69 ch (Digital), E2_E69 ch, F2_F10 ch, I21_I69 ch, IR A_IR J ch
Hyper-band, S1_S41 ch
Receiving Channel
TV Function
Auto Preset 999 ch (non-Nordic [DTV]), Auto Preset 9999 ch (Nordic [DTV]), Auto Preset 99 ch
(ATV), Auto Label, Auto Sort
TV-Tuning System
STEREO/BILINGUAL
NICAM/A2
Viewing angles
Audio amplifier
Speaker
176 ° (H), 176 ° (V)
10 W x 2
(35 mm x 100 mm) x 2
Antenna
UHF/VHF 75 q Din type (Analogue & Digital)
D-Sub 9 pin male connector
SCART (AV input, Y/C input, RGB input, TV output)
SCART (AV input/monitor output, Y/C input)
RS-232C
EXT 1
EXT 2
B
B
R
R
EXT 3
COMPONENT IN (Y/P (C )/P (C ), RCA pin (AUDIO R/L))
EXT 4
15 pin mini D-sub
HDMI
HDMI 1 (EXT 5)
HDMI 2 (EXT 6)
HDMI 3 (EXT 7)
EXT 8
HDMI
Terminals
HDMI
RCA pin (AV input)
USB
SERVICE
HDMI 2/PC AUDIO (R/L)
DIGITAL AUDIO OUTPUT
C. I. (Common Interface)
OUTPUT
Ø 3.5 mm jack*
Optical Digital audio output
EN50221, R206001
RCA pin (AUDIO R/L)
Ø 3.5 mm jack (Audio output)
Headphones
Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Hungarian, Italian,
Latvian, Lithuanian, Norwegian, Polish, Portuguese, Russian, Slovak, Slovene, Spanish, Swedish,
Turkish, Ukrainian
OSD language
Power Requirement
AC 220_240 V, 50 Hz
Power Consumption (Method IEC62087)
Weight
90 W (0.6 W Standby)
10.5 kg (Without stand), 11.5 kg (With stand)
0 °C to e 40 °C
Operating temperature
*
•
The HDMI 2 and EXT 4 terminals can both use the same audio input terminal.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
NOTE
•
Refer to the inside back cover for dimensional drawings.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
End of life disposal
A. Information on Disposal for Users (private households)
1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!
Used electrical and electronic equipment must be treated separately and in accordance with legislation that
requires proper treatment, recovery and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households within the EU states may return their
used electrical and electronic equipment to designated collection facilities free of charge*. In some countries*
your local retailer may also take back your old product free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.
Attention: Your
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these
separately beforehand according to local requirements.
product is marked
with this symbol.
It means that used
electrical and
electronic products
should not be
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment,
recovery and recycling and thus prevent potential negative effects on the environment and human health
which could otherwise arise due to inappropriate waste handling.
mixed with general
household waste.
There is a separate
collection system for
these products.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the correct method of
disposal.
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the product. You might be
charged for the costs arising from take-back and recycling. Small products (and small amounts) might be
taken back by your local collection facilities.
For Spain: Please contact the established collection system or your local authority for take-back of your used
products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the correct method of
disposal.
The battery supplied with this product contains traces of Lead.
For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household
waste! There is a separate collection system for used batteries, to allow proper treatment and recycling in
accordance with legislation. Please contact your local authority for details on the collection and recycling
schemes.
For Switzerland: The used battery is to be returned to the selling point.
For other non-EU countries: Please contact your local authority for correct method of disposal of the used
battery.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Rating table for Child Lock
Broadcasted rating
AGE
User-adjusted rating
4
5
6
7
8
9
10
—
11
—
12
—
13
—
14
—
15
—
16
—
17
—
18
—
✔
—
—
—
—
—
Universal viewing
Parental approval
pref.
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
—
—
—
—
—
—
—
—
—
—
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
X-rated
Broadcasted rating
User-adjusted rating
Universal viewing
Universal viewing
Parental approval pref.
X-rated
—
—
—
✔
—
Parental approval
pref.
✔
✔
—
—
X-rated
Abbreviation list
Abbreviated term
Stands for
ATV
Analogue TV
Digital Noise Reduction
Digital TV
:
DTV
DVB-T
DVI
Digital Video Broadcasting-Terrestrial
Digital Visual Interface
EPG
Electronic Pogramme Guide
High-bandwidth Digital Content Protection
High-Definition Multimedia Interface
Multimedia and Hypermedia Expert Group
On Screen Display
HDCP
HDMI
MHEG
OSD
PCM
USB
Pulse Code Modulation
Universal Serial Bus
1
2
Go to “MENU” > “Setup” > “Child Lock” (Page 22).
Enter “3001” to cancel out the current PIN.
•
The current PIN clears.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
390.0
390,0
66.2
66,2
123.5
123,5
791.0
791,0
699.2
699,2
235.0
235,0
200.0
200,0
Download from Www.Somanuals.com. All Manuals Search And Download.
SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg
SHARP CORPORATION
Printed in Poland
Gedruckt in Polen
Imprimé en Pologne
Stampato in Polonia
Gedrukt in Polen
Impreso en Polonia
Impresso na Polónia
TINS-E056WJZZ
PIN
09P04-PL-NG
Download from Www.Somanuals.com. All Manuals Search And Download.
|