Sharp CRT Television 32F543 User Manual

COLOR TELEVISION

MODEL

32F543

OPERATION MANUAL

Products that have earned the ENERGY STARb are designed to protect the

environment through superior energy efficiency.

CONTENTS

•

Parent Control ................................................................. 16-26

V-CHIP Operation ....................................................... 16-23

VIEW TIMER .............................................................. 24-26

Energy Save ........................................................................ 27

Set Up ............................................................................. 28-34

EZ Setup ......................................................................... 28

Channel Setting .......................................................... .29-31

Blue Screen ............................................................... 31, 32

Personal Preference ........................................................ 33

Universal Plus Function ................................................... 34

Auto Input ............................................................................ 35

CH/Input ID .................................................................... 36, 37

Using the Video and Audio Input Terminals ......................38,39

Using the Audio Output Terminals ....................................... 40

Operation of Universal Remote Control .......................... 41-44

Before Calling for Service .................................................... 45

Calling for Service ............................................................... 45

Specifications ...................................................................... 46

Limited Warranty .................................................................. 59

PAGE

•

IMPORTANT INFORMATION/IMPORTANT

SAFEGUARDS ................................................................... 2-4

Supplied Accessories ............................................................. 5

Before Operating Your Television ............................................ 5

Antenna Connections ......................................................... 5, 6

Quick Reference Control Operation .....................................7, 8

EZ SETUP during First Use ....................................................9

Demo Mode ........................................................................... 10

Accessing the MAIN MENU screen without

•

Remote Control .....................................................................10

Language .............................................................................. 11

Sleep Timer .......................................................................... 11

Video Adjust ......................................................................... 12

Audio Select .................................................................... ..... 13

MTS (Multichannel TV Sound) ......................................... 13

SPEAKER (Internal Speaker Switch) ............................... 13

FAO (Fixed Audio Output) ................................................ 13

AUDIO ADJUST ...............................................................14

Closed Caption .....................................................................15

•

This operation manual includes basic operating instructions

in Spanish and French.

SPANISH is on page 47-52.

FRENCH is on page 53-58.

B294WJ ¹

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT INFORMATION (Continued)

CAUTION:

• Do not place the AC power cord under the TV set or other heavy items.

• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.

• To prevent fire or shock hazard, do not expose this products to dripping or splashing. No objects filled with

liquids, such as vases, should be placed on the product.

IMPORTANT SAFEGUARDS

CAUTION:

Please read all of these instructions before you operate your television and save

these instructions for later use.

Electrical energy can perform many useful functions.This unit has been engineered and manufactured to assure

your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE

HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic

rules for its installation, use and servicing.

1. Unplug this television equipment from the wall outlet before cleaning.

2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3. Do not use attachments not recommended by the television equipment manufacturer as they may cause

hazards.

4. Do not use this television equipment near water — for example, near a bath tub, washbowl, kitchen sink or

laundry tub, in a wet basement, or near a swimming pool, etc.

5. Do not place this equipment on an unstable cart, stand, or table.The television equipment may fall, causing

serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand

recommended by the manufacturer or sold with the television equipment.

6. Television equipment and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the equipment and cart combination to

overturn.

7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a

mounting kit approved by the manufacturer.

8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To

insure reliable operation of the television equipment and to protect it from overheating, these openings must

not be blocked or covered. This television equipment should not be placed in a built-in insulation such as a

bookcase unless proper ventilation is provided.

9. The openings should never be covered with a cloth or other material, and the bottom openings should not

be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television

equipment should never be placed near or over a radiator or heat register.

10. This television equipment should be operated only from the type of power source indicated on the marking

label. If you are not sure of the type of power supplied to your home, consult your television dealer or local

power company.

For television equipment designed to operate from battery power, refer to the operating instructions.

11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger

than the other). The 2-wire polarized plug will fit only one way into the power outlet.

If the plug does not fit, ask your electrician to replace your obsolete outlet.Do not modify the plug and defeat

this safety feature.

12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will

be abused by persons walking on it.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFEGUARDS (Continued)

13. Follow all warnings and instructions marked on the television equipment.

14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded

so as to provide some protection against voltage surges and built-up static charges. Section 810 of the

National Electrical Code provides information with respect to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding

conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements

for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

ANTENNA

LEAD IN

WIRE

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC—NATIONAL ELECTRICAL CODE

15. For added protection for this television equipment during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall outlet and disconnect the antenna.This will prevent

damage to the equipment due to lightning and power-line surges.

16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact

with them might be fatal.

17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.

18. Never push objects of any kind into this television equipment through cabinet slots as they may touch

dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid

of any kind on the television equipment.

19. Do not attempt to service this television equipment yourself as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel

under the following conditions:

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the television equipment.

C. If the television equipment has been exposed to rain or water.

D. If the television equipment does not operate normally by following the operating instructions. Adjust

only those controls that are covered by the operating instructions as improper adjustment of other

controls may result in damage and will often require extensive work by a qualified technician to

restore the television equipment to normal operation.

E. If the television equipment has been dropped or the cabinet has been damaged.

F. When the television equipment exhibits a distinct change in performance — this indicates a need for

service.

21. Upon completion of any service or repairs to this television equipment, ask the service technician to

perform routine safety checks to determine that the television is in safe operating condition.

22. When replacement parts are required, be sure the service technician has used replacement parts

specified by the manufacturer that have the same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other hazards.

Download from Www.Somanuals.com. All Manuals Search And Download.

Supplied Accessories

Size AA

Dry Batteries

Infrared Remote Control

Before OperatingYour Television

Location

• For normal operation, yourTV should be located in an area of the room where cool adequate ventilation

is provided. Do not place the back of the television set in a place where free airflow will be restricted.

• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using

magnets or any other magnetic substance, such as iron are kept well away from the TV set.

Power

YourTV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you are

unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an

electrician. Do not defeat the safety feature of the polarized plug.

Note:

• If the set is not going to be used for a long period, such as during a vacation, unplug the set from the

wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the

POWER BUTTON in the OFF position.)

• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near

the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off the

radio.

• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received

due to interference from the TV.

Before using the television, prepare the Remote Control

To use the remote control, insert batteries first.

•

Inserting the batteries

Battery

Pull up

Cover

• With your thumbnail, pull up the slit as indicated by the arrow to remove the battery cover. Insert two

batteries (size “AA”). Be sure to match the battery m/, terminals with the m/, marks inside the

compartment.

Antenna Connections

Antennas

• The antenna requirements for good color television reception are more important than those for black

& white television reception. For this reason, a good quality outdoor antenna is strongly recommended.

The following is a brief explanation of the type of connections that are provided with the various

antenna systems:

F-type connector

1. A 75-ohm system is generally a round cable with

F-type connector that can easily be attached to

a terminal without tools (not supplied).

75-ohm coaxial cable (round)

2. A 300-ohm system is a flat“twin-lead”cable that

can be attached to a 75-ohm terminal through a

300/75-ohm ADAPTOR (not supplied).

300-ohm twin-lead cable (flat)

Download from Www.Somanuals.com. All Manuals Search And Download.

Antenna Connections (Continued)

OUTDOOR ANTENNA CONNECTION

• Refer to one of the following two diagrams when connecting to an outdoor antenna.

A: Using a VHF/UHF combination outdoor antenna.

B: Using separate VHF and/or UHF outdoor antenna.

• Connect an outdoor antenna cable lead-in to the ANT/CABLE terminal on the rear of the TV set.

A. Combination VHF/UHF Antennas

B. Separate VHF/UHF Antenna

VHF/UHF ANTENNA

REAR PANEL

300/75-ohm

ADAPTOR

(Not supplied)

VHF/UHF ANTENNA

VHF

UHF

300-ohm

twin-lead

ANTENNA ANTENNA

300-ohm

twin-lead

COMBINER

(not supplied)

300-ohm

twin-lead

75-ohm

coaxial cable

IN OUT

75-ohm coaxial

cable

REAR PANEL

NOTICE

F-type connector should be finger-tightened only.

F-type connector

When connecting the RF cable to theTV set, do not

tighten F-type connector with tools.

If tools are used, it may cause damage to your TV

set.

(The breaking of internal circuit, etc.)

75-ohm coaxial cable

CABLE TV (CATV) CONNECTION

• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm

coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.

• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay

channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by

the cable TV company.This converter/descrambler is necessary for normal viewing of the scrambled

channels. (Set your TV on channel 3 or 4.Typically one of these channels is used. If this is unknown,

consult your cable TV company.) For more specific instructions on installing cable TV, consult your

cable TV company. One possible method of utilizing the converter/descrambler provided by your

cable TV company is explained below.

Please note: RF switch equipped with position A/B (not provided) is required.

“A” position on the RF switch (not supplied) : You can view all unscrambled channels using theTV’s

channel keys.

“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/

descrambler using the converter’s channel keys.

RF switch (not supplied)

Two-set

signal

splitter

(not

supplied)

OUT

Cable TV Line

OUT

Cable TV converter/

descrambler

(not supplied)

Note:

• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that

might be required.

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Reference Control Operation

Part Names

Front Panel

•

POWER

INSIDE DOOR

Press → On.

Press again → Off.

VIDEO/AUDIO

TERMINALS

IN 2

REMOTE CONTROL

SENSOR

VOLUME UP/DOWN

(k) Increases sound.

(l) Decreases sound.

CHANNEL UP/DOWN

(a) Selects next higher channel.

(s) Selects next lower channel.

Press → Accesses MAIN MENU.

Press again → Exits MAIN MENU.

To open the door

Using the projection located under the "PULL-OPEN" indication,

pull and lift the door open.

To close the door

Using the projection, lower the door until closed.

Caution:

• When opening or closing the door, do not insert your fingers into

the gap between the door and front panel. This may result in an

injury.

Rear Panel

COMPONENT (VIDEO) TERMINALS

IN 3 (VIDEO/AUDIO) TERMINALS

ANTENNA/CABLE INPUT

TERMINAL

IN 1 (VIDEO/AUDIO) TERMINALS

LINE OUT (AUDIO) TERMINALS

IN 1 S-VIDEO TERMINAL

Note:

•

The TV set and remote control illustrations and the on-screen displays in this manual may differ from their actual

appearance.

Download from Www.Somanuals.com. All Manuals Search And Download.

(Continued)

Quick Reference Control Operation

Part Names

Front Panel

•

Basic Remote Control Functions

Infrared Transmitter Window

POWER

DISPLAY

Press → On.

Press → Displays receiving channel for

Press again → Off.

POWER

DVD

VCR

4 seconds.

DISPLAY

INPUT

Press again → Removes display.

REMOTE KEYPAD

Accesses any channel from keypad.

•

Temporarily displays receiving

channel when in Closed Caption

mode.

FLASHBACK

Returns to previous channel.

INPUT

Press → Switches to external video

PERSONAL PREFERENCE

INPUT 1 mode.

FLASHBACK

ENTER

With the Personal Preference buttons,

you can program your favorite

programs by using the 4 categories A,

B, C and D. The channels can be

accessed quickly by using these

buttons. (See page 33.)

Press twice → Switches to external

video INPUT 2 mode.

100

PERSONAL PREFERENCE

Press 3 times → Switches to external

video INPUT 3 mode or COMPONENT

mode.

VOL

—

VOL

Press 4 times → Switches back to the

original TV mode. See page 39.

VOLUME UP/DOWN

(k) Increases sound.

(l) Decreases sound.

MUTE

ENTER

CATV

DVD

Used in some instances where a Cable

Converter Box requires an “enter”

command after selecting channels,

when using the REMOTE KEYPAD

button. See page 41 .

•

Changes or selects the TV

adjustments on On-Screen Display.

VCR

REW

PLAY

CH/SKIP

PAUSE STOP

REC

Press → Accesses MAIN MENU.

Press again → Exits MAIN MENU.

CHANNEL UP/DOWN

(a) Selects next higher channel.

(s) Selects next lower channel.

CATV/DVD-TV/VCR MODE

SELECT SWITCH

InTV/VCR position, signals sent will be

for TV and VCR control.

In CATV/DVD position, signals sent will

be for cable TV converter and DVD

control.

•

See pages 29–31 for Channel

Setting.

• Moves the “ E ” mark on the MENU

screens.

TV • CATV • VCR • DVD

MUTE

Press → Mutes sound.

Press again → Restores sound.

•

When sound is muted, CLOSED

CAPTION appears if available.

DVD/VCR CONTROL

See page 41.

Note:

•

The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the

remote control, place it under a fluorescent light or other lighting.

•

The phosphorescent material contains no radioactive or toxic material, so it is safe to use.

The degree of illumination will vary depending on the strength of lighting used.

The degree of illumination will decrease with time and depending on the temperature.

The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.

Sunlight and fluorescent lighting are the most effective when charging the display.

The TV set and remote control illustrations and the on-screen displays in this manual may differ from their actual

appearance.

Download from Www.Somanuals.com. All Manuals Search And Download.

EZ SETUP during First Use

When you turn on the TV for the first time, it will automatically

memorize the broadcasting channels.

Please perform the following instructions before pressing the

POWER button.

(1) Insert the batteries into the remote control. (See page 5)

(2) Connect the antenna cable to the TV set. (See pages 5, 6)

(3) Plug in the AC POWER cord to the wall outlet.

POWER

DVD

VCR

POWER

•

DISPLA

INPUT

VOLUME

(k)/(l)

FLASHBACK

ENTER

100

PERSONAL PREFERENCE

CHANNEL

UP (a)/

VOL

—

VOL

DOWN (s)

MUTE

1 Press the POWER button on the TV set or on the Remote Control

to turn on the TV. The SELECT LANGUAGE screen will be

displayed.

SELECT LANGUAGE

ENGL I SH

ESPAÑOL

FRANCA I S

(On the Remote Control)

(On the Set)

POWER

SELECT : CH

–

SET

: VOL

(SELECT LANGUAGE screen)

2 Press CH a/s to select “ENGLISH”, “ESPAÑOL (SPANISH)” or

SELECT LANGUAGE

“FRANCAIS (FRENCH)”.

ENGL I SH

ESPAÑOL

FRANCA I S

SELECT : CH

: VOL

–

SET

3 Press VOL k/l to access the EZ SETUP screen.

CONNECT ANTENNA OR CABLE.

START EZ SETUP?

STOP

START

VOL

—

VOL

(EZ SETUP screen)

(START)

4 Press VOL k.

PLEASE WA I T

AUTO PROGRAMMI NG

1 2 5

The tuner will automatically search for the

broadcasting and cable TV channels.(The CH No.

will automatically increase when it appears.)

VOL

STOP

START

(STOP)

If you want to stop the EZ SETUP process once it

has started, press VOL l and it will be canceled.

VOL

—

If you want to SET UP again, please refer to page

28 on SET UP.

To cancel EZ SETUP

Press VOL l.

5 Once EZ SETUP is complete, the lowest channel number

memorized will be displayed.

Note:

• If EZ SETUP does not memorize all the channels in your region, please refer to pages 29–31 for

more information on manually memorizing the channels using CHANNEL SETTING.

• It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is

incorrect or frequency jamming is occurring around the area. Please refer to pages 29–31 for more

information on manually memorizing the channels using CHANNEL SETTING.

Download from Www.Somanuals.com. All Manuals Search And Download.

Demo Mode

• To learn more about the TV set, you can enter DEMO mode. Simply

press and hold MENU on the TV set for more than 3 seconds.

• To cancel DEMO mode, again press MENU on the TV set for more

than 3 seconds.

(On the Set)

button

Example:

DEMO mode display

Accessing the MAIN MENU screen without Remote Control

(On the Set)

• If you misplaced your Remote Control you can still access most settings

via the MAIN MENU screen by pressing MENU on the TV set.

• Some features of your TV set are not accessible without the Remote

Control. If you lost your Remote Control, contact a Sharp Service

Center for a replacement.

button

Download from Www.Somanuals.com. All Manuals Search And Download.

Language

The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.

•

1 Press MENU to access the MAIN MENU screen.

SLEEP

I MER

I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

(MAIN MENU screen)

2 Press CH a/s to move the “E” mark to “SET UP”.

SLEEP

I MER

I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

3 Press VOL k/l to access the SET UP screen, then press CH a/s

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

to move the “E” mark to “LANGUAGE”.

CH SETT I NG

AUTO I NPUT

VOL

—

VOL

→

CH I NPUT I D

(SET UP screen)

LANGUAGE

4 Press VOL k/l to access the LANGUAGE select screen.

ENGL I SH

ESPAÑOL

FRANCA

VOL

—

VOL

(LANGUAGE select screen)

I D IOMA

5 Press CH a/s to select “ENGLISH”, “ESPAÑOL (SPANISH)” or

ENGL I SH

ESPAÑOL

“FRANCAIS (FRENCH)”.

FRANCA

6 Press MENU to exit.

Sleep Timer

You can preset your television to turn off automatically in increments of 30, 60, 90 or 120 minutes.

•

1 Press MENU to access the MAIN MENU screen.

2 Press VOL k/l to access the SLEEP TIMER screen.

SLEEP

I MER

I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

VOL

—

VOL

→

3 Press VOL k/l to set a sleep time of 30, 60, 90 or 120 minutes.

SLEEP

I MER

12 0M REMA I N

4 Press MENU to exit.

VOL

—

VOL

→

Note:

(SLEEP TIMER screen)

• To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and select “– – – M REMAIN”

during step 3.

• While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular

intervals or when the Remote’s DISPLAY key is pressed twice. 5 minutes before the SLEEP TIMER

turns off the TV, the screen prompts the time remaining for 4 seconds. The SLEEP TIMER shows a

similar display for each remaining minute and a 10-second display right before shutting off the TV.

• If you turn the POWER OFF, the SLEEP TIMER will automatically reset.

Download from Www.Somanuals.com. All Manuals Search And Download.

Video Adjust

Description of Adjustment Items

•

POWER

DVD

VCR

DISPLAY

INPUT

Selected item

VOL

button

VOL

button

PICTURE

TINT

To increase contrast

To decrease contrast

To make skin tones greenish

To increase color intensity

To increase brightness

To increase sharpness

To make skin tones purplish

To decrease color intensity

To decrease brightness

To decrease sharpness

COLOR

FLASHBACK

ENTER

100

BRIGHT

SHARP

PERSONAL PREFERENCE

VOLUME

)/(

VOL

—

VOL

COLOR TEMP.

RESET

To choose a LOW, ML, MH or HIGH color tone.

To return all adjustments to factory preset levels.

CHANNEL

UP ( )/

MUTE

CATV

DVD

DOWN (

VCR

1 Press MENU to access the MAIN MENU screen.

SLEEP

I DEO ADJ UST

AUD I O SEL ECT

I MER

2 Press CH a/s to move the “E” mark to “VIDEO ADJUST”.

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

3 Press VOL k/l to access the PICTURE adjust screen.

VOL

—

VOL

P I CTURE

(PICTURE adjust screen)

4 Press CH a/s to select the desired adjustment item.(Refer to the

diagram below.)

TINT

COLOR

BRIGHT

PICTURE

COLOR TEMP.

: CH s

SHARP

RESET

: CH a

5 Press VOL k/l to adjust the setting.

VOL

—

VOL

P I CTURE

VOL k

increases contrast

VOL l

decreases contrast

6 Repeat steps 4 to 5 to adjust other settings.

7 Press MENU to exit.

Note:

• VIDEO ADJUST setting, once set, is shared among AIR/CABLE, INPUT 1, INPUT 2, and INPUT 3

modes.

• VIDEO ADJUST setting for INPUT 3 when used as COMPONENT can be set independently.

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Select

H MTS (Multichannel TV Sound)

This function allows reception of stereo or bilingual TV sound.

You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.

Stereo broadcasts

•

Live television broadcasts of sports, shows, concerts, etc. can be received in dynamic stereo sound.

SAP broadcasts

Television broadcast can be received with either MAIN or SAP sound.

MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)

SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)

If stereo sound is difficult to hear;

You can obtain clearer sound by manually switching to fixed monaural mode.

•

H SPEAKER (Internal Speaker Switch)

This function turns the TV’s internal speakers “ON” or “OFF” when listening to sound from

external speakers by using the AUDIO OUTPUT Terminals. (See page 40).

H FAO (Fixed Audio Output)

This function turns the TV’s internal speakers “OFF” and allows fixed audio output from the

AUDIO OUTPUT Terminals. (See page 40). With FAO, the TV’s volume control is disabled.

1 Press MENU to access the MAIN MENU screen.

SLEEP

I MER

2 Press CH a/s to move the “E” mark to “AUDIO SELECT”.

I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

3 Press VOL k/l to access the AUDIO SELECT screen.

AUD I O SELECT

MTS

: STEREO

: ON

4 Press CH a/s to move the “E”mark to“MTS”, “SPEAKER”, “FAO”

SPEAKER

FAO

: OFF

or “AUDIO ADJUST”.

AUD I O AD JUST

VOL

—

VOL

→

(AUDIO SELECT screen)

5 Press VOL k/l to select “STEREO”, “SAP”or “MONO”when the

AUD I O SELECT

“E” mark is at “MTS” position.

MTS

: STEREO

: ON

SPEAKER

FAO

: OFF

MTS

SPEAKER

FAO

AUD I O AD JUST

STEREO

VOL

—

VOL

SAP

OFF

(AUDIO SELECT screen

)

MONO

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Select (Continued)

H AUDIO ADJUST

When the “E” mark is at “AUDIO ADJUST”, press VOL k/l to

access the AUDIO ADJUST screen. To access the desired item,

press CH a/s. To adjust the audio setting, press VOL k/l.

TREBLE

BASS

BALANCE

RESET

Selected item

VOL k button

VOL l button

TREBLE

To increase treble response.

To increase bass response.

To decrease treble response.

BASS

To decrease bass response.

BALANCE

To emphasize the right

speaker’s volume.

To emphasize the left

speaker’s volume.

TREBLE

RESET

To return all adjustments to factory preset levels.

6 Press MENU to exit.

An example screen displaying ON AIR when receiving stereo broadcasts

Current channel number

“← ON AIR” will appear next to STEREO or

SAP when receiving STEREO or SAP

broadcasts.

STEREO

SAP

MONO

ON A I R

(CHANNEL call on screen)

Note:

• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo

broadcast.You must switch the mode back to STEREO if you want to hear stereo sound again.

• Selecting MTS while receiving video signals from INPUT terminals does not change the type of

sound; in this case, sound is determined by the video source.

• If “FAO” mode is on, “SPEAKER” mode will automatically turn off. Changing “SPEAKER” setting will

not affect “FAO” mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Closed Caption

How to set CLOSED CAPTION

•

• YourTV is equipped with an internal Closed Caption decoder.“Closed

Caption”is a system which allows conversations, narration, and sound

effects inTV programs and home videos to appear as captions on the

TV screen (see the illustration).

• Not all the programs and videos will offer closed captioning. Please

look for the “

” symbol to ensure that captions will be shown.

• Closed Caption broadcast can be viewed in two modes: CAPTION

andTEXT. For each mode, two channels are available, CH1 and CH2.

PERSONAL PREFERENCE

VOLUME

)/(

The CAPTION mode shows subscripts of dialogs and commentaries

of TV dramas and news programs while allowing clear view of the

picture.

The TEXT mode displays over the picture other various information

(such as TV program schedule, weather forecast, etc.) that is

independent of the TV programs.

VOL

—

VOL

CHANNEL

UP ( )/

MUTE

CATV

DVD

DOWN (

VCR

1 Press MENU to access the MAIN MENU screen.

SLEEP

I DEO ADJ UST

AUD I O SEL ECT

I MER

2 Press CH a/s to move the “E” mark to “CLOSED CAPTION”.

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

CLOSED CAPT I ON

3 Press VOL k/l to access the CLOSED CAPTION setting screen.

MODE

DATA

: CAPT I ON

: CH

VOL

—

VOL

(CLOSED CAPTION setting screen)

CLOSED CAPT I ON

4 Press CH a/s to move the “E” mark to either “MODE” or “DATA”.

MODE

DATA

: CAPT I ON

: CH

5 Press VOL k/l to change the CLOSED CAPTION setting.

CLOSED CAPT I ON

MODE

DATA

: CAPT I ON

: CH

CH 1

DATA :

CAPTION

MODE :

CH 2

TEXT

OFF

VOL

—

VOL

6 Press MENU to exit.

Note:

• If a broadcast contains CLOSED CAPTION and the MUTE button is pressed, the set enters CAPTION

mode automatically. Pressing MUTE again will return the set to its previous condition.

• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor

or if there are problems at the broadcast source. This does not necessarily indicate a problem with

your TV.

• If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION

broadcast, the closed captions will disappear momentarily.

• If no TEXT broadcast is being received while viewing in the TEXT mode, the screen may become

dark and blank for some programs. Should this occur, switch the Closed Caption mode to “OFF”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (V-CHIP Operation)

H V-CHIP

• This function allows you to restrict TV programs and also allows you to control TV usage based on

FCC data. This function is to prevent your children from watching violence or sexual scenes that may

be harmful.

• Restriction ofTV programs includes two characters that contain information about the program’s MPAA

rating and theTV Parental Guidelines. MPAA is restricted by age.TV Parental Guidelines are restricted

by age and contents.

• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for

complete control.

[1] MPAA RATING

RATING

GENERAL AUDIENCES. All ages admitted.

PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for

children.

age

PG-13

PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for

children under 13.

based

RESTRICTED. Under 17 requires accompanying parent or adult guardian.

NO ONE 17 AND UNDER ADMITTED.

NC-17

X Rating is an older rating that is unified with NC-17 but may be encoded on

older movie’s data.Note:

• MPAA RATING

Example 2:

Example 1:

“R” in the age-based rating is blocked, this will

automatically block the higher rating “NC-17”, “X”

also.

“PG-13” in the age-based rating is blocked, this

will automatically block the higher ratings “R”,

“NC-17”, “X” also.

1. User setting

2. Block table

1. User setting

2. Block table

not to

–––––

block

not to

–––––

block

Select

block

not to

block

PG-13 BLOCK

BLOCK

NC-17 BLOCK

PG-13 –––––

BLOCK

NC-17 BLOCK

BLOCK

PG-13

age

based

age

based

auto-

Select

block

auto-

block

auto-

block

NC-17

auto-

BLOCK

block

Note:

• MPAA RATING is only age-based.

[2] TV PARENTAL GUIDELINES

content based

AGE

RATING

(Sexually

(Adult

(Sexual (Violence) (Fantasy

Suggestive Language) Situation)

Dialog)

Violence)

–

TV-Y (All children)

TV-Y7 (Direct to Older Children)

TV-G (General Audience)

–

age

based

TV-PG (Parental Guidance

Suggested)

TV-14 (Parents Strongly

Cautioned)

–

TV-MA (Mature Audience Only)

: Content Rating can be set.

l : Content Rating cannot be set (not normally broadcast by TV station).

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (V-CHIP Operation) (Continued)

• TV PARENTAL GUIDELINES (Example)

AGE

–

TV–Y

: V I EW

TV–Y7

TV–G

: BLOCK

Example 1.1 : Age Based setting

–

TV–PG

TV– 1 4

TV–MA

Clear s (block) from each "AGE" box for all ratings.

–

This will automatically unblock everything.

MENU : RETURN

Example 1.2 : Age Based setting

AGE

–

TV–Y

: V I EW

For “TV-G” put a

in the "AGE" box. This will automatically block the

TV–Y7

TV–G

–

V : BLOCK

–

higher age ratings “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.

Please note the content ratings “D”, “L”, “S”, “V”are automatically blocked

as well.

TV–PG

TV– 1 4

TV–MA

MENU : RETURN

Example 2.1 : Content Based setting

If you choose to unblock every content-based items (“D”, “L”, “S”, “V”),

AGE

–

TV–Y

: V I EW

: BLOCK

TV–Y7

TV–G

–

clear the

MA”.

(block) from each “AGE” box of “TV-PG”, “TV-14” and “TV-

TV–PG

TV– 1 4

TV–MA

–

MENU : RETURN

Example 2.2 : Content Based setting

AGE

–

TV–Y

: V I EW

TV–Y7

TV–G

–

V : BLOCK

Put a

in the box corresponding to “TV-PG” (row) and “V (Violence)”

–

TV–PG

TV– 1 4

TV–MA

(column). This will automatically block the “V” boxes for “TV-14” and

“TV-MA”. Setting only “TV-PG-V”, “TV-14-V” or “TV-MA-V” will not block

all programs rated “TV-PG”, “TV-14” or “TV-MA”.

–

MENU : RETURN

Example 3 : Resetting an Age Based setting

For “TV-14”, put a

(block) in the “AGE” box.

AGE

–

TV–Y

: V I EW

This will again automatically block the content ratings “D”, “L”, “S”, “V”

for “TV-MA” as well as “TV-14” (“D” is not available for “TV-MA”).

Please note that the lower age rating “TV-PG” does not change from its

previous settings after this.

TV–Y7

TV–G

V : BLOCK

–

TV–PG

TV– 1 4

TV–MA

–

MENU : RETURN

Note:

• Content ratings can be modified but only in the combinations indicated by

in the table on page 16.

• Changing a lower age rating’s content setting to “BLOCK” automatically changes the same higher age

rating’s content setting to “BLOCK” regardless of their previous settings.

• Changing a lower rating’s“AGE” setting to“BLOCK” automatically changes all higher ratings to “BLOCK”

regardless of their previous settings.

• For “TV-Y7”, “TV-PG”, “TV-14” and “TV-MA”, if you clear the

change settings based on content.

in the “AGE” box (unblock) you can still

• Clearing a higher rating’s age or content setting will not clear lower settings.Make sure that all undesired

boxes are blocked.

[3] ADDITIONAL MODE

Besides “MPAA RATINGS” and “TV PARENTAL GUIDELINES”, new ratings system’s data can be

downloaded when they become available. (See page 20.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (V-CHIP Operation) (Continued)

How to set V-CHIP

[1] MPAA RATING

•

VOLUME

)/(

FLASHBACK

ENTER

100

(

PERSONAL PREFERENCE

CHANNEL

UP (a)/

DOWN (b)

VOL

—

VOL

MUTE

1 Press MENU to access the MAIN MENU screen.

SLEEP

I MER

I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

(MAIN MENU screen)

2 Press CH a/s to move the “E” mark to “PARENT CONTROL”.

SLEEP

I MER

I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

PARENT CONTROL

3 Press VOL k/l to access the PARENT CONTROL screen.

V–CH I P BLOCK

V I EW T I MER

VOL

—

VOL

(PARENT CONTROL screen)

4 Press VOL k/l to access the V-CHIP select screen.

MPAA

TV GU I DEL I NES

Note:

• If SECRET No. is already set, enter the SECRET No.

DOWNLOAD : OFF

STATUS

: OFF

VOL

—

VOL

(See

To change the V-CHIP BLOCK after

•

registering a secret No. on page 23.).

(V-CHIP select screen)

5 Press VOL k/l to select “MPAA”. Press CH a/s to move the

“E” mark to “PG”, then press VOL k/l to select BLOCK. If you

set “PG”to BLOCK, “PG-13”, “R”, “NC-17”and“X”are automatically

: – – – – –

: BLOCK

PG– 1 3

NC– 1 7

blocked.

MENU : RETURN

VOL

—

VOL

—

VOL

→

6 Press MENU to return to the V-CHIP select screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (V-CHIP Operation) (Continued)

7 Press MENU, then “INPUT SECRET No.” will be displayed.

I NPUT SECRET No .

Note:

–

• If SECRET No. is already set, skip to step 9.

8 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.

I NPUT SECRET No .

ENTER

100

When done, press MENU to exit.

Note:

• If you set “G” to BLOCK , all ratings are automatically blocked.

• If you set “X” to BLOCK, “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked.

[2] TV GUIDELINES

MPAA

TV GU I DEL I NES

1 Repeat steps 1 to 4 of [1] MPAA RATING.

2 Press CH a/s to move the “E” mark to “TV GUIDELINES”.

DOWNLOAD : OFF

STATUS

: OFF

(V-CHIP select screen)

AGE

–

3 Press VOL k/l to access the TV GUIDELINES screen.

TV–Y

: V I EW

TV–Y7

TV–G

: BLOCK

VOL

–

—

TV–PG

TV– 1 4

TV–MA

–

4 To change AGE and CONTENT SETTING, press CH a/s to move

MENU : RETURN

the “E” mark to the desired rating and then press VOL k/l to

select.

(TV GUIDELINES screen)

VOL

—

VOL

→

5 Press CH a/s to move the “E” mark to the desired content item

TV –Y7

AGE

BLOCK

– – – – –

BLOCK

and then press VOL k/l to select either “BLOCK” or “– – – – –”

(unblock).

VOL

—

VOL

→

MENU : RETURN

(CONTENT RATING screen)

6 Press MENU to return to the TV GUIDELINES screen.

7 Repeat steps 4 to 6 until all ratings and their contents are set.

When done, press MENU to return to V-CHIP select screen.

AGE

–

TV–Y

: V I EW

TV–Y7

TV–G

–

V : BLOCK

–

TV–PG

TV– 1 4

TV–MA

–

MENU : RETURN

9 Press MENU to exit.

Note:

• If SECRET No. is not set, enter a SECRET No. as show in steps 7 and 8 of [1] MPAA RATING.

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (V-CHIP Operation)C(Conotnintiuneude)d)

[3] Downloading additional rating mode

REMOTE

KEYPAD

There will be an additional new rating system. In that case,

please set up as follows. Subsequently the new rating

system will set up automatically.

VOLUME

FLASHBACK

ENTER

100

(k)/(l)

PERSONAL PREFERENCE

CHANNEL

UP ( )/

VOL

—

VOL

DOWN (s)

MUTE

MPAA

TV GU I DEL I NES

1 Repeat steps 1 to 4 of [1] MPAA RATING.

2 Press CH a/s to move the “E” mark to “DOWNLOAD”.

DOWNLOAD : OFF

STATUS

MPAA

: OFF

3 Press VOL k/l to select “DOWNLOAD : ON”.

TV GU I DEL I NES

DOWNLOAD : ON

VOL

—

VOL

STATUS

: OFF

4 Press MENU, then “INPUT SECRET No.” will be displayed.

I NPUT SECRET No .

Note:

–

•

If SECRET No. is already set, skip to step 6.

5 Enter a 4-digit secret No. using the REMOTE KEYPAD.

I NPUT SECRET No .

ENTER

100

6 Press MENU to exit.

Downloading V-CHIP data

•

1 If you watch a program containing “new rating system data”, the

PLEASE WA I T

DOWNLOAD screen will be displayed.

NOW DOWNLOADI NG

V–CH I P DATA

(DOWNLOAD screen)

2 The DOWNLOAD screen will disappear, once downloading is finished.

Note:

•

DOWNLOAD will not start, if you are not watching a program containing “new rating system data”.

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (V-CHIP Operation) (Continued)

How to set additional rating mode (Example)

Once downloading is complete, you can set the blocking pattern as follows.

•

1 Repeat steps 1 to 4 of [1] MPAA RATING.

MPAA

TV GU I DEL I NES

2 Press CH a/s to move the “E” mark to “Cdn. English Ratings”,

Cd n

En g

s h Ra

n g s

F r e n c h Ra

n g s

then press VOL k/l.

DOWNLOAD : ON

STATUS

: ON

VOL

—

VOL

→

(After downloading the

rating data)

3 You can select “BLOCK” or “– – – – –” (unblock) for each rating

: – – – – –

: BLOCK

: – – – – –

: BLOCK

: – – – – –

: BLOCK

C8 +

item by pressing CH a/s and VOL k/l.

1 4 +

1 8 +

I ND I V I DUAL BLOCK

MENU : RETURN

VOL

—

VOL

→

(ENGLISH INDIVIDUAL

BLOCK screen)

4 You can select “BLOCK” or “– – – – –” (unblock) for each rating

item by pressing CH a/s and VOL k/l if you select “Cdn.French

Ratings” in step 2.

: – – – – –

: BLOCK

: – – – – –

: BLOCK

: – – – – –

8 +

1 3 +

1 6 +

1 8 +

I ND I V I DUAL BLOCK

MENU : RETURN

VOL

—

VOL

→

(FRENCH INDIVIDUAL

BLOCK screen)

Note:

• You are able to download up to 4 different rating systems.

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (V-CHIP Operation) (Continued)

Activating the V-CHIP BLOCK

•

1 Repeat steps 1 to 4 of [1] MPAA RATING.

2 Press CH a/s to move the “E” mark to “STATUS”.Press VOL k/

l to activate the V-CHIP BLOCK. (If STATUS is OFF, V-CHIP

BLOCK will not operate.)

MPAA

TV GU I DEL I NES

DOWNLOAD : OFF

STATUS

: ON

VOL

—

VOL

→

(V-CHIP select screen)

3 Press MENU, then “INPUT SECRET No.” will be displayed.

Note:

I NPUT SECRET No .

–

•

If SECRET No. is already set, skip to step 5.

4 Enter a 4-digit secret No. using the REMOTE KEYPAD.

I NPUT SECRET No .

ENTER

100

5 Press MENU and the secret No. will be registered.

To temporarily cancel the V-CHIP BLOCK

•

1 “V-CHIP HAS BEEN ACTIVATED” appears if you view a program

2 2

with the same program rating data you configured.

V–CH I P HAS BEEN ACT I VATED

TV–Y7

Note:

• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.

2 Press MENU, then “INPUT SECRET No.” will be displayed.

I NPUT SECRET No .

–

3 Enter the 4-digit secret No. using the REMOTE KEYPAD, then V-

CHIP BLOCK will be canceled temporarily.If the wrong secret No.

is chosen, “SECRET No. IS INCORRECT” will be displayed. Input

the secret No. again in this case.

I NPUT SECRET No .

ENTER

100

Note:

• If you turn the power ON from OFF, the V-CHIP BLOCK will be activated again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (V-CHIP Operation) (Continued)

To change the V-CHIP BLOCK after registering a secret No.

•

1 Repeat steps 1 to 4 of [1] MPAA RATING, then “INPUT SECRET

No.” will be displayed.

I NPUT SECRET No .

–

2 Enter the 4-digit secret No. using the REMOTE KEYPAD and

theV-CHIP select screen will be displayed.SetV-CHIP BLOCK

again.

I NPUT SECRET No .

ENTER

100

If you forget or need to change your secret No., clear the original secret No. and set

up a new one.

•

1 Repeat steps 1 to 4 of [1] MPAA RATING, or 1 to 2 of To

temporarily cancel the V-CHIP BLOCK, then “INPUT SECRET

No.” will be displayed.

(On the Set)

2 Press and hold both VOL k and CH a on the TV set

simultaneously until the message “INPUT SECRET No.”

disappears.

VOL k and CH a

buttons

3 Press the MENU button twice to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (VIEW TIMER)

H VIEW TIMER

This function allows you to restrict TV viewing time and also allows you to control TV usage.

This function is to prevent your children from watching too much TV.

VIEWING TIME (an accumulative timer: counts only the time

duration while the TV power is on.)

• VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10

V I EW T I MER

hours) in 30 minutes intervals.

V I EWI NG T I ME

––H ––M

OFFTIME (RestrictsTV viewing after theVIEWINGTIME reaches

zero.)

OFF T I ME

––H ––M

STATUS : OFF

• OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours)

in 30 minutes intervals.

STATUS (Select ON to activate VIEW TIMER)

How to set VIEW TIMER

•

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “PARENT CONTROL”.

SLEEP T I MER

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

3 Press VOL k/l to access the PARENT CONTROL screen.

4 Press CH a/s to move the “E” mark to “VIEW TIMER”.

PARENT CONTROL

V–CH I P BLOCK

V I EW T IMER

VOL

—

VOL

→

(PARENT CONTROL screen)

5 Press VOL k/l to access “VIEW TIMER”.

V I EW T I MER

V I EWI NG T I ME

––H ––M

OFF T I ME

––H ––M

STATUS : OFF

VOL

—

VOL

6 Press CH a/s to select “VIEWING TIME” and “OFF TIME”. For

V I EW T I MER

each selection, press the VOL k/l to set the time duration.

V I EWI NG T I ME

2H 0 0M

OFF T I ME

––H ––M

STATUS : OFF

VOL

—

VOL

→

V I EW

I MER

7 Press CH a/s to select “STATUS”. Press the VOL k/l to turn

V I EWI NG

2H 0 0M

I ME

5H 0 0M

STATUS : ON

I ME

ON the “VIEW TIMER”. (If STATUS is OFF, VIEW TIMER will not

OFF

operate.)

VOL

—

VOL

→

8 Press MENU. “INPUT SECRET No.” will be displayed.

I NPUT SECRET No .

Note:

–

•

If SECRET No. is already set, skip to step 10.

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (VIEW TIMER) (Continued)

9 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.

NPUT SECRET No .

10 Press MENU to exit.

ENTER

→

100

Example:

V I EW

I MER

• To restrict anybody from watchingTV for more than 5 hours, after watching

the TV for 2 hours, your settings would look like the one on the right.

• You can choose to watch the 2 hours of TV as you wish. For example, you

could watch 1 hour of TV, turn the TV off for 30 minutes, then turn the TV

on and watch the remaining 1 hour of the VIEWING TIME.

V I EWI NG

2H 0 0M

I ME

5H 0 0M

STATUS : ON

I ME

OFF

To change the VIEW TIMER setting after registering a secret No.

•

1 Repeat steps 1 to 4 of How to setVIEWTIMER.Press

VOL k/l, and “INPUT SECRET No.” will be

displayed.

NPUT SECRET No .

–

VOL

—

VOL

2 Enter the 4-digit SECRET No. using the REMOTE

KEYPAD, and the VIEW TIMER access screen will

be displayed. Repeat steps 5, 6.

NPUT SECRET No .

ENTER

100

Note:

SECRET No .

I NCORRECT

• When you choose the correct secret No., theVIEW TIMER access screen

is displayed. If the wrong secret No. is chosen, “SECRET No. IS

INCORRECT” is displayed. Input the secret No. again in this case.

To cancel the VIEW TIMER (While the TV set is OFF but the VIEW

TIMER is set.)

•

I ME OVER

NPUT SECRET No .

1 Turn on the TV; a blue screen message “TIME OVER” will appear. If

–

you do nothing, the TV will turn off in approximately 30 seconds.

2 Enter the 4-digit secret No. using the REMOTE

I ME OVER

KEYPAD. When you choose the correct secret No.,

NPUT SECRET No .

the VIEW TIMER is canceled. If the wrong secret No.

is chosen, “SECRET No. IS INCORRECT” is

displayed. Input the secret No. again in this case.

ENTER

100

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (VIEW TIMER) (Continued)

To cancel the VIEW TIMER setting or change the secret No. (If

you forget the SECRET No.)

•

1 Repeat steps 1 to 4 of How to setVIEWTIMER.Press VOL k/l,

and “INPUT SECRET No.” will be displayed.

NPUT SECRET No .

–

VOL

—

VOL

2 Press and hold both VOL k and CH a on the TV set

simultaneously until theVIEW TIMER access screen is displayed.

Now you can cancel the VIEW TIMER settings or change the

SECRET No. while “INPUT SECRET No.” is displayed.

(On the Set)

VOL k and CH a

buttons

Notice of Remaining VIEWING TIME

•

VIEWING TIME

0H 30M REMAIN

• For every 30 minute interval, the remaining time will be displayed for

4 seconds.For the last 5 minutes, the remaining time will be displayed

every minute.

VIEWING TIME

0H 05M REMAIN

• “0 REMAIN”will be displayed for 10 seconds just before the VIEWING

TIME expires.

VIEWING TIME

REMAIN

Download from Www.Somanuals.com. All Manuals Search And Download.

Energy Save

This feature lets you lower the power consumption of your TV

set which in turn saves you money and minimizes the impact on

the environment. When this feature is turned on, it reduces the

brightness of the TV to a level that consumes approximately 20

percent less energy than when the feature is turned off.

The reduction in brightness will be less noticeable under low

room lighting conditions.

•

VOLUME

)/(

CHANNEL

UP ( )/

PERSONAL PREFERENCE

(

)

VOL

—

VOL

DOWN (

MUTE

CATV

DVD

VCR

1 Press MENU to access the MAIN MENU screen.

SLEEP T I MER

V I DEO ADJ UST

AUD I O SEL ECT

2 Press CH a/s to move the “E” mark to “ENERGY SAVE”.

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

3 Press VOL k/l to access the ENERGY SAVE select screen.

ENERGY SAVE : OFF

VOL

—

VOL

(ENERGY SAVE select screen)

4 Press VOL k/l to select “ON”.

ENERGY SAVE : ON

VOL

—

VOL

5 Press MENU to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up

H EZ Setup

By operating the channel preset functions, you can preset your

TV to the desired channels for viewing.

VOLUME

)/(

FLASHBACK

ENTER

100

(

PERSONAL PREFERENCE

CHANNEL

UP ( )/

VOL

—

VOL

DOWN (s)

MUTE

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

SLEEP

I MER

I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

3 Press VOL k/l to access the SET UP screen, then press

SET UP

CH a/s to move the “E” mark to “CH SETTING”.

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH SETT I NG

AUTO I NPUT

CH / I NPUT I D

VOL

—

VOL

→

(SET UP screen)

4 Press VOL k/l to access the CH SETTING screen.

CH SETT I NG

EZ SETUP

A I R / CABLE

CH SEARCH

CH MEMORY

VOL

—

VOL

(CH SETTING screen)

5 Press VOL k/l to access the EZ SETUP screen.

CONNECT ANTENNA OR CABLE.

START EZ SETUP?

VOL

—

VOL

STOP

START

(EZ SETUP screen)

(START)

6 Press VOL k.

The tuner will automatically search for the

broadcasting and cable TV channels.(The CH No.

will automatically increase when it appears.)

VOL

PLEASE WA I T

AUTO PROGRAMMI NG

1 2 5

(STOP)

If you want to stop the EZ SETUP process once it

STOP

START

has started, press VOL l.Search will be canceled.

VOL

—

To cancel EZ SETUP

Press VOL l.

7 Once EZ SETUP is complete, the lowest channel number

memorized will be displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up (Continued)

H Channel Setting

If EZ SETUP does not memorize all the channels in your region, follow the instructions below

to manually memorize the channel.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

SLEEP

I MER

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

3 Press VOL k/l to access the SET UP screen.

4 Press CH a/s to move the “E” mark to “CH SETTING”.

SET UP

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH SETT I NG

AUTO I NPUT

CH / I NPUT I D

VOL

—

VOL

→

(SET UP screen)

5 Press VOL k/l to access the CH SETTING screen.

CH SETT I NG

EZ SETUP

A I R / CABLE

CH SEARCH

CH MEMORY

VOL

—

VOL

(CH SETTING screen)

6 Press CH a/s to move the “E” mark to “AIR/CABLE”, then press

CH SETT I NG

VOL k/l to access the AIR/CABLE screen.

EZ SETUP

A I R / CABLE

CH SEARCH

CH MEMORY

VOL

—

VOL

→

7 Press CH a/s to move the “E” mark to the desired mode.

A I R / CABLE

A I R

CABLE STD

CABLE HRC

CABLE I RC

CABLE STD

CABLE HRC

CABLE IRC

AIR

(AIR/CABLE screen)

8 Press MENU to exit.

Note:

• Receivable channels of your TV set are:

AIR channels:

CABLE channels:

VHF: 2 through 13.

1 (HRC and IRC mode only)

UHF: 14 through 69.

2 through 125 (STD, HRC and IRC)

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up (Continued)

Saving broadcast TV channels into memory

•

1 Press MENU to access the MAIN MENU

screen, then press CH a/s to move the “E”

mark to “SET UP”.

→

CH SETT I NG

2 Press VOL k/l to access the SET UP

screen, then press CH a/s to move the “E”

mark to “CH SETTING”.

VOL

—

VOL

EZ SETUP

A I R / CABLE

CH SEARCH

CH MEMORY

VOL

—

VOL

3 Press VOL k/l to access the CH SETTING

screen.

(CH SETTING screen)

4 Press CH a/s to move the “E” mark to “CH

SEARCH”, then press VOL k/l to access

the CH SEARCH screen.

CH SEARCH

A I R 1 0

VOL

—

VOL

→

STOP

START

To start:

(START)

Press VOL k. The tuner will search through

all available channels in your area and add

them into the TV memory.

(CH SEARCH screen)

VOL

To stop:

(STOP)

Press VOL l. CH SEARCH will stop at the

current channel and will not add any higher

channels.

VOL

—

5 Press MENU to exit.

Note:

• If you press VOL k again while in the CH SEARCH mode, auto-

program will start again, and the previously memorized channels will

be lost.

Adding weak or additional channels or erasing unwanted channels from TV memory

•

1 Press MENU to access the MAIN MENU

screen, then press CH a/s to move the “E”

mark to “SET UP”.

→

CH SETT I NG

2 Press VOL k/l to access the SET UP

screen, then press CH a/s to move the “E”

mark to “CH SETTING”.

VOL

—

VOL

EZ SETUP

A I R / CABLE

CH SEARCH

CH MEMORY

3 Press VOL k/l to access the CH SETTING

VOL

—

VOL

screen.

(CH SETTING screen)

4 Press CH a/s to move the “E” mark to “CH

MEMORY”, then press VOL k/l to access

the CH MEMORY screen.

VOL

—

VOL

→

CH MEMORY

A I R 1 0

5 Use CH a/s or REMOTE KEYPAD to select

ERASE

ADD

each desired channel to add or erase.

ENTER

100

(CH MEMORY screen)

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up (Continued)

6 Press VOL k to add a channel to the TV

memory or press VOL l to erase a channel

from the TV memory.

VOL

—

VOL

POWER

DVD

VCR

DISPLAY

INPUT

VOL k

To add channel 10 to

CH MEMORY

FLASHBACK

ENTER

the TV memory

100

I R 1 0

PERSONAL PREFERENCE

VOLUME

)/(

ERASE

ADD

ERASE

ADD

(

VOL l

To erase channel 10 from

the TV memory

VOL

—

VOL

CHANNEL

UP ( )/

MUTE

(CH MEMORY

unmemorized channel)

(CH MEMORY

memorized channel)

CATV

DVD

DOWN (

VCR

7 Press MENU to exit.

H BLUE SCREEN

Automatically turns the screen blue if a broadcast signal is not

received. After 15 minutes of non-reception, the TV will turn off

automatically.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

SLEEP

I DEO ADJ UST

AUD I O SEL ECT

I MER

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

SET UP

3 Press VOL k/l to access the SET UP screen.

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH SETT I NG

AUTO I NPUT

CH / I NPUT I D

VOL

—

VOL

(SET UP screen)

4 Press VOL k/l to access the BLUE SCREEN select screen.

BLUE SCREEN : OFF

VOL

—

VOL

(BLUE SCREEN select screen)

5 Press VOL k/l to select “ON”.

BLUE SCREEN : ON

VOL

—

VOL

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up (Continued)

6 Press MENU to exit.

When the BLUE SCREEN is set to “ON”

Power turns off

automatically

No signal

Blue screen

after 15

minutes

Standby mode

Note:

• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function

despite the presence of a broadcast signal.To continue watching TV under these conditions, switch

the BLUE SCREEN “OFF”.

• While INPUT 1, 2, or 3 (COMPONENT) is selected, the BLUE SCREEN will not be shown even if

BLUE SCREEN is turned on.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up (Continued)

H Personal Preference

REMOTE

KEYPAD

By setting PERSONAL PREFERENCE channels in advance, you

can select your favorite channels easily.

VOLUME

FLASHBACK

ENTER

100

(

k)/(l)

PERSONAL PREFERENCE

PERSONAL

PREFERENCE

CHANNEL

UP ( )/

VOL

—

VOL

DOWN (

MUTE

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

SLEEP T I MER

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

SET UP

3 Press VOL k/l to access the SET UP screen, then press

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH SETT I NG

AUTO I NPUT

CH / I NPUT I D

CH a/s to move the “E” mark to “PERSONAL PREF.”.

VOL

—

VOL

→

(SETUP screen)

PERSONAL PREF.

4 Press VOL k/l to select the PERSONAL PREFERENCE select

screen in which you can program 4 favorite channels, in 4 different

categories. (total of 16 channels)

<A>

– – – – – – – – – – – –

VOL

—

VOL

(PERSONAL PREFERENCE select screen)

PERSONAL PREF.

5 Press VOL k/l and CH a/s to move the “E” mark to the desired

<A>

position.

– – – – – – – – – – – –

VOL

—

VOL

and

6 Press REMOTE KEYPAD on the Remote to input the CHANNEL

PERSONAL PREF.

Number into memory. Press INPUT on the

<A>

1 2 5 – – – – – – – – –

– – – – – – – – – – – –

Remote to register the INPUT mode into memory.

Example: 125 — Press “100” followed by “2” and then “5”.

ENTER

25 — Press “2” and then “5”.

100

— Press “0” and then “4”.

To reset a registered CHANNEL Number, input “0” twice.

7 Repeat steps 5 and 6 to register the next CHANNEL Number or INPUT mode.

8 Press MENU to exit.

To select the PERSONAL PREFERENCE channel.

If the channels are memorized as shown on the right,

press the Remote’s “A” button to select the channels below.

PERSONAL PREF.

<A>

1 2 5

8 5

3 8 – – –

2 5 1 2 3

3 0 – – –

4 0

5 5 – – – – – –

125 25

– – – – – – – – –

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up (Continued)

H Universal Plus Function

VOLUME

)/(

CHANNEL

UP ( )/

DOWN (

(

)

VCR or DVD input mode will be selected automatically by pressing

the VCR/DVD PLAY button on the Remote Control.

VOL

—

VOL

)

MUTE

CATV

DVD

VCR

DVD/VCR

PLAY

REW

PLAY

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

SLEEP

I MER

I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

3 Press VOL k/l to access the SET UP screen.

SET UP

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH SETT I NG

AUTO I NPUT

CH / I NPUT I D

VOL

—

VOL

(SET UP screen)

4 Press CH a/s to move the “E” mark to “UNIVERSAL PLUS”.

SET UP

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH SETT I NG

AUTO I NPUT

CH / I NPUT I D

5 Press VOL k/l to access the UNIVERSAL PLUS select screen

UN I VERSAL PLUS

to select VCR or DVD mode.

VCR

DVD

:OFF

VOL

—

VOL

(UNIVERSAL PLUS select screen)

6 Press CH a/s to select the VCR or DVD, and press VOL k/l to

select “CH3”, “CH4”, “INPUT 1”, “INPUT 2”, “INPUT 3

(COMPONENT)” or “OFF”.

CH3

OFF

CH4

INPUT 1

INPUT 2

UN I VERSAL PLUS

INPUT 3 (COMPONENT )

VCR

DVD

:CH3

:OFF

Switch to the input mode your VCR or

DVD is connected to. If connected

through RF (antenna terminal), select

either CH3 or CH4 to match the setting

of the VCR or DVD.

VOL

—

VOL

→

7 Press MENU to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Auto Input

VOLUME

)/(

The unit is preset to switch to the INPUT 2 screen automatically

whenVIDEO equipment is connected to the INPUT 2 terminal. Do

the following to switch this feature off:

•

PERSONAL PREFERENCE

(

CHANNEL

UP ( )/

VOL

—

VOL

DOWN (s)

MUTE

CATV

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

SLEEP

I DEO ADJ UST

AUD I O SEL ECT

I MER

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

3 Press VOL k/l to access the SET UP screen, then press

SET UP

CH a/s to move the “E” mark to “AUTO INPUT”.

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH SETT I NG

AUTO I NPUT

CH / I NPUT I D

VOL

—

VOL

→

(SET UP screen)

4 Press VOL k/l to access the AUTO INPUT select screen.

AUTO I NPUT : AUTO

Press VOL k/l to select “AUTO”.

(

I NPUT2 )

VOL

—

VOL

(AUTO INPUT select screen)

5 You may turn off “AUTO INPUT” when it is not in use.

AUTO I NPUT : OFF

Press VOL k/l to select “OFF”.

(

I NPUT2 )

VOL

—

VOL

6 Press MENU to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

CH/Input ID

You can assign an ID label to each channel or input mode.These

ID labels can be 4 characters long maximum and will be displayed

along with the channel number/input mode when the labeled

channel is selected.

•

REMOTE

KEYPAD

VOLUME

FLASHBACK

ENTER

100

(k)/(l)

(Example: labeling air channel 10 “TV12”.)

PERSONAL PREFERENCE

CHANNEL

UP ( )/

VOL

—

VOL

DOWN (s)

MUTE

1 Press MENU to access the MAIN MENU screen.

SLEEP

I MER

I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

(MAIN MENU screen)

2 Press CH a/s to move the “E” mark to “SET UP”.

SLEEP

I MER

I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

3 Press VOL k/l to access the SET UP screen then press

SET UP

CH a/s to move the “E” mark to “CH/INPUT ID” .

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH SETT I NG

AUTO I NPUT

CH / I NPUT I D

VOL

—

VOL

→

(SET UP screen)

4 Press VOL k/l to access the CH/INPUT ID screen.

CH / I NPUT I D

A I R 1 0

: _ _ __

I D

VOL

—

VOL

(CH/INPUT ID screen)

Download from Www.Somanuals.com. All Manuals Search And Download.

CH/Input ID (Continued)

5 Use CH a/s or REMOTE KEYPAD to select each desired channel

to label.

Press INPUT on the Remote to label the INPUT mode.

ENTER

100

ID: Labeling the channel name

Press VOL k/l to select “ID” then press VOL k to select the

first character. Press CH a/s to enter a desired letter. Press

VOL k/l to enter the next desired letter. Press MENU to return

to the CH/INPUT ID screen.

_ _ __

I D

RESET

MENU : RETURN

VOL

—

VOL

→

(ID Input screen)

Selectable characters:

Space: _

Alphabets: A-Z

I D : TV1 2

RESET

Numbers: 0-9

MENU : RETURN

Symbols: — . & ( ) / +

VOL

—

VOL

→

Example TV 12

RESET: Resetting the ID to “_ _ _ _”

Press CH a/s to move the “E” mark to “RESET”, then press

VOL k/l. The previously set ID will return to “_ _ _ _”.

I D : TV1 2

RESET

MENU : RETURN

_ _ __

I D

RESET

MENU : RETURN

VOL

—

VOL

6 Press MENU to exit.

Note:

• The maximum number of ID labels available to register channel names is 20 for AIR channels and 40

for CABLE channels.

• If you wish to register a new ID when all the available ID labels are assigned, delete a registered ID

to make room.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Video and Audio Input Terminals

Connecting video equipment for playback of video material.

• To view video material from external video equipment, make sure to connect the equipment properly

to the input terminals on the TV set.

•

Connecting video device equipped with video output terminals

CONNECTIONS

VIDEO EQUIPMENT

(Front connection

terminals of TV)

Inside the front door

To VIDEO

OUTPUT

To AUDIO OUTPUT (L)

To AUDIO OUTPUT (R)

CAMCORDER

(Rear connection

terminals of TV)

TV GAME

To VIDEO OUTPUT

To AUDIO OUTPUT (L)

To AUDIO OUTPUT (R)

VCR

To AUDIO OUTPUT (R)

To AUDIO OUTPUT (L)

To VIDEO OUTPUT

DVD

Yellow : To video input terminal

White : To audio input (L) terminal

Red : To audio input (R) terminal

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Video and Audio Input Terminals (Continued)

Notes:

• COMPONENT terminals are DVD compatible, allows you to enjoy the highest quality playback

image than the image from IN 1 S-VIDEO terminal.

• The IN 1 S-VIDEO terminal is used to obtain a higher quality image by importing image signals.

• The S-VIDEO terminal is for the video image only. To receive an audio signal, connect the audio

cable to the IN 1 AUDIO terminals (left and right).

(Rear connection terminals of TV)

TO S-VIDEO OUTPUT

(When your video

equipment has an

S-VIDEO output terminal).

VCR

To VIDEO OUTPUT

To COMPONENT

VIDEO OUTPUT

Terminals

To AUDIO

OUTPUT (L/R)

To AUDIO OUTPUT (L)

To AUDIO OUTPUT (R)

Video Equipment with Component

video (Component Color)

Output Terminals (Y, P^Band PR

)

To watch video material playback

•

• Press the Remote’s INPUT button to select the VIDEO INPUT mode for the video equipment you

wish to play.

• The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed.

AIR

CABLE

INPUT 1

(IN 1)

Rear

INPUT 2

(IN 2)

Front

INPUT 3 (COMPONENT)

(IN 3)

Rear

• When the AV cables are connected to theVIDEO INPUT 3 and COMPONENTY, PB and PR terminals

simultaneously, the COMPONENT terminal has priority over the VIDEO terminal.

• INPUT mode can be selected by pressing either the CH a on the TV remote control when the TV is

set to the highest channel stored in memory, or by pressing the CH s when it is set to the lowest

channel.

Note:

• When connecting video or audio equipment to the television, be sure that the power is turned off in

order to prevent damage to either the television or the equipment being connected.

• The S-Video terminal has priority over theVIDEO terminal (IN 1).When you wish to use video equipment

connected to the VIDEO terminal (IN 1), unplug equipment connected to the S-VIDEO terminal.

• For detailed information on the connection and use of auxiliary equipment, refer to the instruction

manuals of the equipment being used.

• The connection cables/cords can be obtained from your local video store.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Audio Output Terminals

These terminals are used for connecting an external audio amplifier. The STEREO/MONO/

SAP,VOLUME, MUTE and FAO functions can all be controlled via the television’s remote control

or directly on theTV itself.These terminals relay the audio signal of all programs being displayed

on theTV screen.

•

(AUDIO OUTPUT terminals are located on the rear of the cabinet.)

CONNECTIONS

(Rear connection terminals of TV)

To the audio

input terminals

Stereo Amplifier

Speaker System

(1) Before connecting the cables, turn on the TV and adjust the TV volume for a moderate listening level.

(2) Turn off the TV and connect the audio cables to the AUDIO LINE OUTPUT terminals on the TV.

(3) Turn the TV set and stereo amplifier on.

(4) If you desire, you can turn off the sound of the TV’s internal speakers by accessing the TV’s AUDIO

SELECT screen. See pages 13, 14.

(5) Adjust the volume control on the stereo amplifier to a moderate listening level.

(6) Control of the audio can be adjusted using the audio controls (STEREO/MONO/SAP, VOLUME,

MUTE and FAO), from either the remote control, or directly from the TV set.

Note:

• For detailed information on the connection and use of auxiliary equipment, refer to the operation

manuals of the equipment being used.

• When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio

connection cord and plug adaptor as shown below.

• When FAO is set to “OFF”, we recommend you to keep the TV’s audio output level high for optimal

sound quality. (see page 13.)

Plug adapter

To the equipment

being connected

To the TV

Pin plug x 2

Pin Plug

Pin jack/Mini plug

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation of Universal Remote Control

“Identifying” VCRs, cable TV converters

Universal Remote Control

•

and DVDs

With the purchase of your television set you

also have received the latest innovation in

remote control technology.With its easy-to-use

push button keyboard, your Remote can

control your television set and most infrared

remote controlled VCRs, cable TV converters

and DVDs as well.

Your Remote Control has been set at the

factory to operate your TV and many remote

controlled VCRs, cable TV converters and

DVDs. However, in some cases an easy one-

time set-up step may be necessary before the

Remote will operate accessory VCRs, cable

TV converters and DVDs.

Note:

• In this set-up step, the Remote locates and

memorizes the remote control transmitter code

for the VCR, cable TV converters and DVDs.

• Once “identified”, the Remote sends proper

signals to operate your accessory.

• Depending on the model year produced, brand

and type ofVCR, cableTV converter and DVD,

some models may not be compatible with the

remote control.

• This identifying step will not have to be

repeated until power to the Remote is

interrupted due to a battery failure.

• Some brands may not enable channel

selection until the ENTER is pressed. In such

case, try the following.

Example:

Using your remote control with a VCR

•

When you select channel 24,

(1) Press REMOTE KEYPAD “2”.

(2) Press REMOTE KEYPAD “4”.

(3) Press ENTER.

Once you make certain the Remote Control

has “identified” your remote controlled VCR or

DVD, the Remote is ready to operate your unit.

The various VCR or DVD function buttons on

the Remote will not operate your VCR or DVD

if those features are not already found on your

unit.

For detailed information on the use of the

CableTV converter Box refer to their operating

manuals.

• All VCR buttons will operate whether the

Remote is in TV or VCR modes.

• For detailed information on the use of theVCR

or DVD, refer to the operation manual of the

VCR or DVD.

Using your Remote with your TV

•

After installing the batteries, set the CATV/

DVD-TV/VCR on the Remote to the TV

position.(If you can change the channel of the

TV by pressing CH a/s on the Remote

Control, it is in the TV position.)

DVD/VCR POWER

REMOTE KEYPAD

Press to turn the VCR or DVD

on and off.

Use to enter two-digit code

numbers when identifying your

VCR, DVD and CATV converter.

POWER

DVD

VCR

DISPLAY

INPUT

PLAY

Press to playback a tape or disc.

ENTER

REWIND

FLASHBACK

ENTER

Press to rewind a tape or

reverse a disc. For some VCRs

or DVDs you may need to press

STOP first, then REWIND.

Press to rapidly advance the

tape or disc. For some VCRs or

DVDs, you may need to press

STOP first, then FF.

100

PERSONAL PREFERENCE

VOL

—

VOL

VCR CHANNEL

PAUSE

MUTE

UP ( )/ DOWN (

)

Press to temporarily stop the

tape or disc during playback

or recording (VCR only).

Press again to release PAUSE.

Press to scan up or down through

channels on the VCR.

DVD SKIP

Press to jump forward to the

beginning of the next chapter/track,

or backward to the beginning of the

current chapter/track, and

automatically start to play that

chapter/track.

CATV

DVD

VCR

REW

PLAY

CH/SKIP

PAUSE STOP

REC

STOP

Press to stop the tape or disc.

RECORD

Press to begin recording.

TV • CATV • VCR • DVD

(VCR only)

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation of Universal Remote Control (Continued)

REMOTE CONTROL

CODE NUMBER

VCR BRAND

DVD/VCR

POWER

DVD

VCR

POWER

DISPLAY

INPUT

Akai

25, 26, 37

15, 22, 30

10, 31

15, 22, 30

21, 32, 35

09, 10, 11

28, 29

Audio Dynamics

Broksonic

Canon

Capehart

Craig

Curtis Mathis

Daewoo

DBX

Dynatech

Emerson

Fisher

DISPLAY

REMOTE

KEYPAD

ENTER

FLASHBACK

100

PERSONAL PREFERENCE

VOL

—

VOL

Funai

CHANNEL

UP (a)/

DOWN (s)

MUTE

Goldstar

Hitachi

Instant Replay

JC Penney

JVC

Kenwood

Lloyds

Magnavox

Magnin

Marantz

Memorex

Minolta

Mitsubishi

Montgomery Ward

Multitech

NEC

Panasonic

Pentax

Philco

Philips

Quasar

RCA

Realistic

Samsung

Sanyo

Scott

Sears

CATV

DVD

VCR

04, 06, 24, 30

15, 41, 42

14, 15

04, 05, 08

CATV/DVD-

TV/VCR

How to identify a VCR

•

The remote control may already be set to

operate your VCR.Try this initial check before

going on to the following “identifying” section.

04, 10, 24, 29

17, 18, 39, 40

02, 43

15, 22, 30

04, 44, 45

05, 06

04, 05

04, 05, 08

06, 07, 33

01, 02, 10, 24

23, 31

14, 10

06, 11, 24

01, 02, 03

12, 13, 38

04, 05, 08

(1) Slide CATV/DVD-TV/VCR switch to VCR.

(2) Point the Remote towards VCR and press

POWER (DVD/VCR).

(3) Does the Remote turn theVCR ON and OFF?

• If yes, the Remote is ready to operate theVCR

and no further steps are needed.

• If no, continue to the “identifying” section.

Setting Method

Refer to the following steps and list to quickly

find the remote control code for your accessory

VCR.

• First look up your VCR’s remote control code

number before going through the Setting

Method.

(1) Slide CATV/DVD-TV/VCR switch to VCR.

(2) Press and hold down DISPLAY and CH s on

your remote control.

Sharp

Shintom

Sony

Sound Design

Sylvania

Symphonic

Tatung

Then release both buttons.

(3) Within 10 seconds after releasing DISPLAY

and CH s , enter your VCR’s two-digit remote

control code number using the REMOTE

KEYPAD (refer to the list ).

• The remote control is now ready to send

commands to your VCR.

Teac

15, 29

27, 29

19, 20

Teknika

Thomas

TMK

Toshiba

Video Concepts

Yamaha

Zenith

Some brands have more than one remote code

listed, due to changes in the remote codes

from early to later model years, or due to format

differences (VHS/BETA). In such cases, you

may have to try more than one code to find

the code your VCR accepts.

15, 29, 30

Note:

Depending on the model, year produced,

brand, and type of VCR, some models may

not be compatible with the remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation of Universal Remote Control (Continued)

POWER

DVD/VCR

POWER

DVD

VCR

DISPLAY

INPUT

POWER

INPUT

DISPLAY

REMOTE

KEYPAD

FLASHBACK

ENTER

100

PERSONAL PREFERENCE

VOL

—

VOL

CHANNEL

UP (a)/

DOWN (s)

MUTE

CATV

DVD

VCR

CATV/DVD-

TV/VCR

REW

PLAY

CH/SKIP

PAUSE STOP

REC

How to identify a DVD

•

REMOTE CONTROL

CODE NUMBER

DVD BRAND

The remote control may already be set to

operate your DVD. Try this initial check before

going on to the following “identifying” section.

Denon

JVC

01, 10

Magnavox

Marantz

Mitsubishi

Panasonic

Philips

Pioneer

Proscan

RCA

Samsung

Sharp

Sony

Toshiba

Yamaha

Zenith

(1) Slide CATV/DVD-TV/VCR switch to DVD.

(2) Point Remote towards DVD and press DVD/

VCR POWER.

(3) Does the Remote turn the DVD ON and OFF?

• If yes, the Remote is ready to operate the DVD

and no further steps are needed.

• If no, continue to the “identifying” section.

Setting Method.

Refer to the following steps and list to quickly

find the remote control code for your accessory

DVD.

• First look up your DVD’s remote control code

number before going through the Setting

Method.

Note:

Depending on the model, year produced,

brand, and type of DVD, some models may

not be compatible with the remote control.

(1) Slide CATV/DVD-TV/VCR switch to DVD.

(2) Press and hold down INPUT and CH s on

your remote control.

Then release both buttons.

(3) Within 10 seconds after releasing INPUT and

CH s, enter your DVDs two-digit remote

control code number using REMOTE KEYPAD

(refer to the list).

• The remote control is now ready to send

commands to your DVD.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation of Universal Remote Control (Continued)

POWER

DVD

VCR

DISPLAY

INPUT

POWER

DISPLAY

REMOTE

KEYPAD

FLASHBACK

ENTER

100

PERSONAL PREFERENCE

VOL

—

VOL

CHANNEL

UP (a)/

DOWN (s)

MUTE

CATV

DVD

VCR

CATV/DVD-

TV/VCR

REW

PLAY

CH/SKIP

PAUSE STOP

REC

How to identify a cable converter

Setting Method.

•

REMOTE CONTROL

CODE NUMBER

CATV CONVERTER

BRAND

Refer to the following steps and list to quickly

find the remote control code for your cable TV

converter.

• First look up your converter’s remote code

number before going through the Setting

Method below.

(1) Slide CATV /DVD-TV/VCR switch to CATV.

(2) Press and hold down DISPLAY and CH s on

your remote control.

Anvision

Cable Star

Eagle

07, 08

04, 05, 15, 23, 24, 25,

30, 36

04, 05, 15, 23, 24, 25

30, 36

07, 08, 19, 25, 28, 29,

32, 33, 40, 41

General Instrument

Jerrold

Magnavox

Oak Sigma

Panasonic

Philips

27, 39

Then release both buttons.

07, 08, 19, 26, 28, 29,

32, 33, 40, 41

18, 20

07, 08

27, 43

(3) Within 10 seconds after releasing DISPLAY

and CH s, enter your converter’s two-digit

code number using REMOTE KEYPAD (refer

to the list).

Pioneer

Randtek

RCA

• The remote control is now ready to send

commands to your converter.

Scientific Atlanta

Sony

Viewstar

03, 22, 42

07, 08, 19, 26, 28, 29

32, 33, 40, 41

• Some brands have more than one remote code

listed due to changes in the remote codes from

early to later model years. In such cases, you

may have to try more than one code to find

the code your converter accepts.

Zenith

Note:

Depending on the model, year produced,

brand, and type of CATV converter, some

models may not be compatible with the remote

control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Calling for Service

Check these items and see if you can correct the trouble with a slight adjustment of the controls.

QUICK SERVICE

CHECK LIST

POSSIBLE REMEDY

Try a new channel, if OK, then there

X X

X X X

X X

is a possible station trouble.

Is TV plugged in? Power at outlet?

Is TV’s POWER button on?

X X

X X X

X X

Is antenna connected to terminal on

the back of the set?

X X

X X X

X X

If outside antenna is being used,

check for broken wire.

Check for local interference or

external electrical noise.

X X

X X X

X X

Turn off the POWER and then turn it

on after about a minute.

X X

X X X

X X

Adjust COLOR control.

Adjust PICTURE control.

Check external Video/Audio products:

look for loose/broken connection

leads. (Refer to pages 38–40)

X X

X X X

X X

X X X

X X

Check batteries of Remote Control.

Slide CATV/DVD-TV/VCR Select

Switch to TV position.

Are audio cables connected firmly?

Check the volume level.

X X

X X X

X X

Is SPEAKER ON? See pages 13, 14.

Change Closed Caption mode to

“OFF”/Energy Save mode to “OFF”.

Unplug the TV and plug it in again

after 2 minutes or longer.

X X

X X X

X X

Note:

• If no TEXT broadcast is being received while viewing in the TEXT

mode, the screen may become dark and blank for some programs.

Should this occur, switch the Closed Caption mode to “OFF”.

(Dark and Blank Picture)

Calling for Service

For location of the nearest Sharp Authorized Servicer, or to obtain product literature accessories, supplies,

or customer assistance, please call 1-800-BE-SHARP.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

MODEL

32F543

NTSC

Receiving System

Stereo Broadcast

Reception Channels

MTS/SAP

AIR

VHF

UHF

2-13 ch

14-69 ch

CATV

1-125 ch

Channel Tuning

181-channel Reception PLL tuning system

VHF/UHF 75 ohm Unbalanced

32˝ Diagonally Measured

Antenna Input Impedance

Screen Size

Terminals

Audio/Video input x 3 (Front x 1, Rear x 2)

S-Video input x 1 (Rear)

COMPONENT-IN x 1 (Rear)

Audio output x 1 (Rear)

Antenna x 1 (Rear)

Sound Output

5 W (RMS) x 2

AC 120 V, 60 Hz

150 W

Power Source

Power Consumption

Dimensions

[34 41/64. (W) x 28. (H) x 22. (D)]

[(W) x (H) x (D)] mm

[880 mm (W) x 711 mm (H) x 559 mm (D)]

Weight (approx.)

143.3 lbs. (65.0 kg)

• Design and specifications are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Limited Warranty

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp

brand product (the “Product”), when shipped in its original container, will be free from defective

workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the

defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser

for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product nor to the additional excluded

item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which

has been subjected to improper voltage or other misuse, abnormal service or handling, or which has

been altered or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth

below and provide proof of purchase to the servicer.

The limited warranty described herein is in addition to whatever implied warranties may be granted to

purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE

OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied

warranty lasts, so the above limitation may not apply to you.

Neither the sales personnel of the seller nor any other person is authorized to make any warranties

other than those described herein, or to extend the duration of any warranties beyond the time period

described herein on behalf of Sharp.

The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall

be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and

for the period of time described herein, shall constitute complete fulfillment of all liabilities and

responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction

of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp

be liable or in any way responsible, for any damages or defects in the Product which were caused by

repairs or attempted repairs performed by anyone other than an authorized servicer.Nor shall Sharp be

liable or in any way responsible for any incidental or consequential economic or property damage.

Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion

may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.YOU MAY ALSO HAVE OTHER RIGHTS

WHICH VARY FROM STATE TO STATE.

Model Specific Section

Your Product Model Number & Description:

32F543, 32 inch Color Television

(Be sure to have this information available when you

need service for your Product.)

Warranty Period for this Product:

One (1) year parts and labor. The warranty period

continues for an additional one (1) year, for a total

of two (2) years, with respect to the picture tube(s)

in the Product for parts only. Labor and service are

not provided free of charge for this additional period.

Additional Item(s) Excluded from

Warranty Coverage (if any):

Non-rechargeable batteries.

Where to Obtain Service:

From a Sharp Authorized Servicer located in the

United States. To find the location of the nearest

Sharp Authorized Servicer, call Sharp toll free at 1-

800-BE-SHARP.

What to Do to Obtain Service:

Contact your Sharp Authorized Servicer to obtain

in-home service for this Product. The Servicer will

come to your home and if it is necessary to remove

the Product, the Servicer will reinstall it. Be sure to

have Proof of Purchase available.

TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com

Download from Www.Somanuals.com. All Manuals Search And Download.

Sharp TV Video Accessories AN 3DG20 User Manual
SIIG Computer Hardware SATA II 150 User Manual
Snapper Lawn Mower 1690047 User Manual
Snapper Tiller SST5 User Manual
Sony Portable CD Player D EJ101 User Manual
Sony Speaker XS V6833 User Manual
Stamina Products Bicycle Accessories 55 1779 User Manual
Stanton CD Player S550 User Manual
Sub Zero Range Sealed Burner RangeTop User Manual
Sunrise Medical Mobility Aid XT2505S User Manual