model
27N-S50
C O N T E N T S
Page
Page
• Important Information .................................. 2 - 3
• Important Safeguards .................................. 3 - 4
• Supplied Accessories ....................................... 5
• Before Operating Your Television ..................... 5
• Antenna Connections ........................................ 6
• Quick Reference Control Operation ............. 7 - 9
• EZ SETUP during First Power On .................. 10
• Demo Mode ..................................................... 11
• Accessing the MAIN MENU screen
• Parent Control .......................................... 15 - 25
• V-CHIP Block.......................................... 15 - 22
• View Timer .............................................. 23 - 25
• Energy Save .................................................... 25
• Set Up....................................................... 26 - 31
• EZ Setup ....................................................... 26
• Channel Setting ...................................... 27 - 29
• Blue Screen ................................................... 29
• Using the Video and Audio
without Remote Control ................................... 11
• Language......................................................... 11
• Sleep Timer ..................................................... 12
• Video Adjust .............................................. 12 - 13
• Audio Select ............................................. 13 - 14
• MTS (Multichannel TV Sound) ............... 13 - 14
• Closed Caption ......................................... 14 - 15
Input Jacks ...................................................... 30
• Before Calling for Service ......................... 31 - 32
• Limited Warranty............................................. 35
This operating manual includes basic
operating instructions in Spanish and French.
SPANISH is on page 8, 32.
FRENCH is on page 9.
A
E
s an
NERGY
trademark.
E
NERGY
S
S
TAR®
Partner, SHARP has determined that this product meets the
TAR® guidelines for energy efficiency.
E
NERGY
S
TAR® is a U.S. registered
6931 MEN1
0-9 27N-S50 2.1
1
6/1/00, 11:41 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information (Continued)
WARNING - FCC Regulations state that any unauthorized changes or modifications to this
equipment not expressly approved by the manufacturer could void the user’s authority
to operate this equipment.
Important Safeguards
CAUTION: Please read all of these instructions before you operate your television and save
these intructions for later use.
Electrical energy can perform many useful functions. This unit has been engineered and manufactured
to assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL
SHOCK OR FIRE HAZARDS. In order not to defeat the safeguards incorporated in this equipment,
observe the following basic rules for its installation, use and servicing.
1. Unplug this television equipment from the wall outlet before cleaning.
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use attachments not recommended by the television equipment manufacturer as they may
cause hazards.
4. Do not use this television equipment near water — for example, near a bathtub, washbowl, kitchen
sink or laundry tub, in a wet basement, or near a swimming pool, etc.
5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall,
causing serious injury to a child or an adult, and serious damage to the equipment. Use only with a
cart or stand recommended by the manufacturer or sold with the television equipment.
6. Television equipment and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the equipment and cart combination
to overturn.
7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a
mounting kit approved by the manufacturer.
8. Slotsandopeningsinthecabinetandthebackorbottomareprovidedforventilation. Toinsurereliable
operation of the television equipment and to protect it from overheating, these openings must not be
blocked or covered. This television equipment should not be placed in a built-in insulation such as a
bookcase unless proper ventilation is provided.
9. The openings should never be covered with a cloth or other material, and the bottom openings should
not be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This
television equipment should never be placed near or over a radiator or heat register.
10. This television equipment should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your home, consult your television
dealer or local power company.
For television equipment designed to operate from battery power, refer to the operating instructions.
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade
bigger than the other). The 2-wire polarized plug will fit only one way into the power outlet.
If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and
defeat this safety feature.
12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord
will be abused by persons walking on it.
13. Follow all warnings and instructions marked on the television equipment.
3
0-9 27N-S50 2.1
3
6/1/00, 11:41 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards (Continued)
14. Ifanoutsideantennaisconnectedtothetelevisionequipment,besuretheantennasystemisgrounded
so as to provide some protection against voltage surges and built-up static charges. Section 810 of
the National Electrical Code provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors,locationofantenna-dischargeunit,connectiontogroundingelectrodes,andrequirements
for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
ACCORDING TO NATIONAL ELECTRICAL CODE.
ANTENNA LEAD-IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
SERVICE
EQUIPMENT
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC PART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
15. For added protection for this television equipment during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This
will prevent damage to the equipment due to lightning and power-line surges.
16. Anoutsideantennasystemshouldnotbelocatedinthevicinityofoverheadpowerlinesorotherelectric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
18. Never push objects of any kind into this television equipment through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the television equipment.
19. Do not attempt to service this television equipment yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the television equipment.
C. If the television equipment has been exposed to rain or water.
D. Ifthetelevisionequipmentdoesnotoperatenormallybyfollowingtheoperatinginstructions.Adjust
only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the television equipment to normal operation.
E. If the television equipment has been dropped or the cabinet has been damaged.
F. When the television equipment exhibits a distinct change in performance — this indicates a need
for service.
21. Upon completion of any service or repairs to this television equipment, ask the service technician to
perform routine safety checks to determine that the television is in safe operating condition.
22. When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
4
0-9 27N-S50 2.1
4
6/1/00, 11:41 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied Accessories
Infrared Remote Control
Part Number : RRMCG1324CESA
Size AA
Dry Batteries
Before Operating Your Television
Location
• For normal operation, your TV should be located in an area of the room where cool adequate ventilation
is provided. Do not place the back of the television set in a place where free airflow will be restricted.
• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using
magnets or any other magnetic substance, such as iron are kept well away from this TV set.
Power
Your TV operates on 120 Volts, 60 Hertz (normal household current) and has a polarized plug. If you
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.
NOTE:
• If the set will not be used for a long period, such as during a vacation, unplug the set from the wall
outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near
the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off
either the TV or the radio.
• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to the interference of the TV.
L
Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Insert the batteries
Pull up
Battery
Cover
• With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert two
batteries (size “AA”). Be sure to match the battery e/d terminals with the e/d marks inside the
compartment.
5
0-9 27N-S50 2.1
5
6/1/00, 11:41 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Connections
Antennas
• The antenna requirements for good color television reception are more important than those for
black & white television reception. For this reason, a good quality outdoor antenna is strongly
recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
F-type connector
1. A 75 ohm system is generally a round cable with F-type connector
that can easily be attached to a terminal without tools (not
supplied). The F-type connector should be finger tightened
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
only.
2. A 300 ohm system is a flat “twin-lead” cable that can be attached
to a 75 ohm terminal through a 300-75 ohm ADAPTOR (not
supplied).
OUTDOOR ANTENNA CONNECTION
• Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
• Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the
TV set.
A. Combination VHF/UHF
B. Separate VHF/UHF
CABLE TV (CATV) CONNECTION
• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber
by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled
channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your
cable TV company. One possible method of utilizing the converter/descrambler provided by your
cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s
channel keys.
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/
descrambler using the converter’s channel keys.
RF switch (not supplied)
Two-set
signal
splitter
(not
Cable TV Line
supplied)
OUT
IN
NOTE:
Cable TV converter/
descrambler
• Consult your SHARP Dealer or Service
Center for the type of splitter, RF switch or
combiner that might be required.
(not supplied)
6
0-9 27N-S50 2.1
6
6/1/00, 11:41 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Reference Control Operation
L Location of Controls
Front Panel
A
B
POWER
Press → On.
Press again → Off.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
C
D
SENSOR AREA FOR REMOTE CONTROL
E
CHANNEL UP/DOWN
(8) Selects next higher channel.
A
(9) Selects next lower channel.
• Press both at same time to access MAIN MENU Screen.
B
C
D
IN 2
TERMINALS
E
VIDEO/AUDIO
(VIDEO/AUDIO terminals are also provided on the rear.)
Basic Remote Control Functions
Infrared Transmitter Window
INPUT
POWER
Press once → Switch to external video
Press → On.
INPUT 1 mode.
Press again → Switch to external video
INPUT 2 mode.
Press again → Switch to TV mode.
See page 30.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
VOLUME UP/DOWN
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
•
See pages 26 - 29 for channel
presetting.
• Moves the “ ” mark of the MENU
MUTE
screen.
Press → Mutes sound.
Press again → Restores sound.
MENU
•
CLOSED CAPTION appears when
sound is muted.
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
DISPLAY
Press → Displays receiving channel for
four seconds.
Press again → Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
7
0-9 27N-S50 2.1
7
6/1/00, 11:41 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Referencia rápida de los controles de operación
L Ubicación de los Controles
(ESPAÑOL)
Front Delantero
A
B
ALIMENTACION (POWER)
Pulsando → Enciende (On).
Pulsando nuevamente → Apaga (Off).
AUMENTO/DISMINUCION DEL VOLUMEN (VOL)
(+) Aumenta el sonido.
(–) Disminuye el sonido.
C
D
ZONA DEL SONSOR DEL MANDOA DISTANCIA
E
CANAL SUPERIOR/INFERIOR (CH)
A
(8) Selecciona el siguiente canal superior.
(9) Seleccioal el siguiente canal inferior.
• Pulse los dos a la misma vez para acceder a la pantalla
de MENU PRINCIPAL.
B
C
D
IN 2
E
TERMINALES DE ENTRADA VIDEO/AUDIO TERMINALS
(Las terminales VIDEO/AUDIO también se encuentran en
la parte posterior.)
Funciones Basicas Del Control Remoto
Ventanilla del transmisor de infrarrojos
ALIMENTACION (POWER)
Pulsando Enciende (On).
Pulsando nuevamente Apaga (Off).
ENTRADA (INPUT)
→
Pulsando una vez → Cambia al modo
de entrada 1 de video externo.
Pulsando nuevamente → Cambia al
modo de entrada 2 del vídeo externo.
Pulsando nuevamente → Vuelve al
modo TV original.
→
TECLADO A DISTANCIA
(REMOTE KEYPAD)
Para tener acceso a cualquier
canal empleando las teclas.
RETORNO AL CANAL ANTERIOR
(FLASHBACK)
Para volver al canal anterior.
CANAL SUPERIOR/INFERIOR
(CHANNEL UP/DOWN)
(8) Selecciona el siguiente canal
superior.
AUMENTO/DISMINUCION DEL
VOLUMEN (VOLUME UP/DOWN)
(+) Aumenta el sonido.
(9) Selecciona el siguiente canal
inferior.
• En el modo de MENU, mueve la
marca “ ”.
(–) Disminuye el sonido.
• En modo de MENU cambia o
selecciona el ajuste del televisor.
MENU (MENU)
Pulsando → Accede al MENU PRIN-
SILENCIAMIENTO (MUTE)
CIPAL.
Pulsando → Silencia el sonido.
Pulsando nuevamente → Restaura el
sonido.
• CLOSED CAPTION apparece auto-
máticamente cuando el sonido es
silenciado. Siempre y cuando la
transmisión tenga este señal.
Pulsando nuevamente → Sale del
MENU PRINCIPAL.
VISUALIZACION (DISPLAY)
Pulsando → Aparece el canal de
recepción por cuatro segundos.
Pulsando nuevamente → Elimina la
visualización.
• En el modo de “Closed Caption” se
muestra el canal de recepción por
un corto tiempo.
8
0-9 27N-S50 2.1
8
6/1/00, 11:41 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Référence rapide sur les commandes
(FRANÇAIS)
L Emplacement des touches
Panneau avant
A
B
ALIMENTATION (POWER)
Appuyer pour mettre sous tension.
Appuyer de nouveau pour mettre hors tension.
AUGMENTATION/RÉDUCTION DU VOLUME SONORE (VOL)
(+) Pour augmenter le volume du son.
(–) Pour diminuer le volume du son.
E
C
D
ZONE DE DÉTECTION DU CAPTEUR
TOUCHES DES CANAUX CROISSANT/DÉCROISSANT (CH)
A
(8) Selectionne le canal supérieur suivant.
(9) Sélectionne le canal inféfieur précédent.
• Appuyez sur les deux poussoirs simultanément pour accéder
á l’écran du MENU PRINCIPAL.
B
C
D
IN 2
PRISES D’ENTRÉE VIDÉO/AUDIO
E
(Les prises VIDÉO/AUDIO sont également reprises à l’arriére.)
Fonctions de base de la télécommande
Fenêtre d’émission du signal infrarouge
ALIMENTATION (POWER)
Appuyer pour mettre sous tension.
Appuyer de nouveau pour mettre hors
tension.
ENTRÉE (INPUT)
Appuyer pour sélectionner le mode
ENTRÉE 1 vidèo externe.
Appuyer de nouveau pour sélectionner
le mode ENTRÉE 2 vidéo externe.
Appuyer de nouveau pour revenir au
mode TV initial.
PAVE NUMERIQUE DE COMMANDE
A DISTANCE (REMOTE KEYPAD)
Sélectionne directement le canal voulu
sur le pavé numérique.
TOUCHE DES CANAUX
CROISSANT/DÉCROISSANT
(CHANNEL UP/DOWN)
(8) Sélectionne le canal supérieur
suivant.
(9) Sélectionne le canal inférieur
précédent.
RETOUR (FLASHBACK)
Rappelle le canal regardé précédent.
AUGMENTATION/RÉDUCTION
DU VOLUME SONORE
(VOLUME UP/DOWN)
(+) Pour augmenter le volume du son.
(–) Pour diminuer le volume du son.
• Pour changer ou sélectionner les
réglages du téléviseur en mode
menu.
• Déplace le curseur “ ” sur l’écran
du MENU.
RÉGLAGE (MENU)
Appuyer
Appuyer de nouveau
PRINCIPAL.
→
Accès au MENU PRINCIPAL.
→
Sortie du MENU
SOURDINE (MUTE)
Appuyer → Mise en sourdine du son.
Appuyer de nouveau
du son.
→
Rétablissement
AFFICHAGE (DISPLAY)
Appuyer pour afficher le canal reçu
pendant quatre secondes.
Appuyer de nouveau pour faire
disparaître le canal.
• CLOSED CAPTION apparaît lorsque
le son est mis en sourdine.
• Pour afficher temporairement le
canal reçu en le mode Sous-titres.
9
0-9 27N-S50 2.1
9
6/1/00, 11:41 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
EZ SETUP during First Power On
POWER
L
When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels.
Please perform the following instructions before you press the
power button.
VOLUME
(+)/(–)
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See page 6)
(3) Plug in the AC POWER cord to the wall outlet.
CHANNEL
UP (8)/
DOWN (9)
MENU
1 Press the POWER button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE mode will be
displayed.
(Remote Control)
(On the Set)
(SELECT LANGUAGE mode)
2 Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
3 Press VOL (+) or (–) to access the EZ SETUP mode.
(EZ SETUP mode)
4 Press VOL (+).
The tuner will automatically search for the broadcasting
and cable TV channels. (The CH No. will automatically
increase when it appears.)
If you want to stop the EZ SETUP process once it has
started, press VOL (–) and it will be canceled.
If you want to SETUP again, please refer to page 26 on
SETUP.
To cancel EZ SETUP
Press VOL (–).
5 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
NOTE:
• If EZ SETUP does not memorize all the channels in your region, please refer to page 28 for
more information on manually memorizing the channels using CHANNEL MEMORY.
• It may be difficult to PRESET all channels in an area when the broadcasting signals are weak
or multiple stations are received on the same channel. Please refer to page 28 - 29 for more
information on manually memorizing additional channels using CHANNEL MEMORY.
10
10-18 27N-S50
10
6/1/00, 11:42 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
DEMO Mode
(On the set)
• To quickly learn more about the TV set, press and hold for more than
three seconds both CH UP (8) and DOWN (9) on the TV set. The TV
set will go into DEMO mode and briefly explain the various features.
• To cancel DEMO mode, again press both CH UP (8) and DOWN (9)
on the TV set.
9
8
CH
MENU
Accessing the MAIN MENU screen without Remote Control
• If you misplaced your Remote Control you can still access most
(On the set)
settings via the MAIN MENU screen when you press both CH UP (8)
9
8
CH
and DOWN (9) on the TV set.
• Some features of your TV set will not be accessible without the Remote
Control. If you lost your Remote Control, contact a Sharp Authorized
Servicer by calling 1-800-BE-SHARP for a replacement.
MENU
Language
L
L
The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
Setting the ON SCREEN DISPLAY Language.
1 Press MENU to access MAIN MENU screen.
(MAIN MENU screen)
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET UP”.
3 Press VOL (+) or (–) to access SET UP mode, then press
CH UP (8) or DOWN (9) to move the “ ” mark to “LANGUAGE”.
→
(MAIN MENU screen)
4 Press VOL (+) or (–) to access LANGUAGE change mode.
(LANGUAGE change mode)
5 Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
6 Press MENU to exit.
11
10-18 27N-S50
11
6/1/00, 11:42 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleep Timer
L
You can set the number of minutes for your TV to automatically turn off.
1 Press MENU to access MAIN MENU screen.
2 Press VOL (+) or (–) to access TIMER SET mode.
→
(MAIN MENU screen)
(TIMER SET mode)
3 Press VOL (+) or (–) to set a sleep time of 30, 60, 90 or 120 minutes.
4 Press MENU to exit.
→
NOTE:
• To turn off the Sleep Timer, repeat the above SLEEP TIMER steps and select “– – – REMAIN” during
step 3.
• While Sleep Timer is active, the time remaining will be briefly displayed on-screen at regular intervals
or when the remote’s Display key is pressed.
Video Adjust
Description of Adjustment Items
REMOTE
Selected item
PICTURE
TINT
VOL UP (+) button
VOL DOWN (–) button
To decrease contrast
KEYPAD
To increase contrast
VOLUME
(+)/(–)
To make skin tones greenish
To increase color intensity
To increase brightness
To increase sharpness
To make skin tones purplish
To decrease color intensity
To decrease brightness
To decrease sharpness
COLOR
CHANNEL
UP (8)/
DOWN (9)
BRIGHT
SHARP
MENU
FAVORITE COLOR
RESET
To choose a RED, BLUE or STANDARD COLOR TONE.
To return all adjustments to factory preset levels.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “VIDEO
ADJUST”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access PICTURE adjust mode.
(PICTURE adjust mode)
4 Press CH UP (8) or DOWN (9) to select the desired mode.
(Refer to the diagram below.)
12
10-18 27N-S50
12
6/1/00, 11:42 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Adjust (Continued)
5 Press VOL (+) or (–) to adjust the setting.
VOL UP (+)
increase contrast
VOL DOWN (–)
decrease contrast
6 Repeat steps 4 - 5 to adjust other settings.
7 Press MENU to exit.
Audio Select
L
MTS (MULTICHANNEL TV SOUND)
This circuit allows reception of stereo or bilingual TV sound.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “AUDIO
SELECT”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access AUDIO SELECT mode.
(AUDIO SELECT mode)
4 Press VOL (+) or (–) to change the AUDIO SELECT setting.
(AUDIO SELECT setting)
5 Press MENU to exit.
13
10-18 27N-S50
13
6/1/00, 11:42 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Select (Continued)
Example:
Actual screen indicating ONAIR when receiving STEREO broadcasts.
Actual channel number
“← ON AIR” will appear next to STEREO or
SAP when receiving STEREO or SAP
broadcasts.
(Channel call on screen)
L
You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.
• Stereo broadcasts
Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo sound.
• SAP broadcasts
Television broadcast can be received with either MAIN or SAP sound.
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)
L
If stereo sound is difficult to hear.
• You can obtain clearer sound by manually switching to fixed monaural mode.
NOTE:
• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
• Selecting MTS while in the INPUT mode does not change the type of sound; in this case, sound is
determined by the video source.
Closed Caption
L
HOW TO SET CLOSED CAPTION
• Your TV is equipped with an internal Closed Caption decoder. “Closed
Caption” is a system which allows you to view conversations, narration,
and sound effects in TV programs and home videos as subscript on
your TV screen as shown on the right.
• Not all the programs and videos will offer closed caption. Please look
for the “
” symbol to ensure that captions will be shown.
REMOTE
KEYPAD
• Closed Caption broadcast can be viewed in two modes: CAPTION
and TEXT. For each mode, two channels are available, CH1 and CH2:
VOLUME
(+)/(–)
The [CAPTION] mode subscripts dialogues and commentaries of TV
dramas and news programs while allowing clear view of the picture.
The [TEXT] mode displays over the picture other various information
(such as TV program schedule, weather forecast, etc.) that is
independent of the TV programs.
CHANNEL
UP (8)/
DOWN (9)
MENU
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “CLOSED
CAPTION”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access CLOSED CAPTION setting mode.
(CLOSED CAPTION setting mode)
14
10-18 27N-S50
14
6/1/00, 11:42 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Closed Caption (Continued)
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to either
“MODE” or “DATA”.
5 Press VOL (+) or (–) to change the CLOSED CAPTION setting.
MODE :
DATA :
6 Press MENU to exit.
NOTE:
• If a broadcast has CLOSED CAPTION and the MUTE button is pressed, the set enters [CAPTION]
mode automatically. Pressing MUTE again will return the set to its previous condition.
• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor
or if there are problems at the broadcast source. This does not necessarily indicate a problem with
your set.
• If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION
broadcast, the closed captions will disappear momentarily.
• When viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen
may become dark and blank. Should this occur, set the Closed Caption mode to “OFF”.
Parent Control (V-CHIP Operation)
L V-CHIP
• This function allows you to restrict TV programs and also allows you to control TV usage based on
FCC data. This function is to prevent your children from watching violence or sexual scenes that may
be harmful.
• Restriction of TV programs includes two characters that contain information about the program’s MPAA
rating and the TV Parental Guidelines. MPAAis restricted by age. TV Parental Guidelines are restricted
by age and contents.
• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for
complete control.
[1] MPAA RATING
RATING
G
GENERAL AUDIENCES. All ages admitted.
PG
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for
children.
PG-13
PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for
children under 13.
age
base
R
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NO ONE 17 AND UNDER ADMITTED.
NC-17
X
X Rating is an older rating that is unified with NC-17 but may be encoded on
older movie’s data.Note:
15
10-18 27N-S50
15
6/1/00, 11:42 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
• MPAA RATING (Example)
Example 1.
“PG-13” in the age-based RATING is blocked.
This will automatically block the high ratings “R”,
“NC-17” and “X” also.
Example 2.
“R” in the age-based RATING is blocked. This
will automatically block the high ratings “NC-
17” and “X” also.
NOTE:
• MPAA RATING is only age-based ratings.
[2] TV PARENTAL GUIDELINES
Content Base
y
x
D
L
S
V
FV
RATING
(Sexually
(Adult
(Sexual (Violence) (Fantasy
Suggestive Language) Situation)
Dialog)
Violence)
Age
TV-Y (All children)
ꢀ
ꢀ
—
—
—
—
—
—
—
—
—
TV-Y7 (Direct to
ꢀ
E
Older Children)
Age
TV-G (General
Audience)
ꢀ
ꢀ
ꢀ
ꢀ
—
ꢀ
ꢀ
—
—
ꢀ
ꢀ
ꢀ
—
ꢀ
ꢀ
ꢀ
—
ꢀ
ꢀ
ꢀ
—
—
—
—
Base
TV-PG (Parental
Guidance Suggested)
D
TV-14 (Parents
Strongly Cautioned)
TV-MA (Mature
Audience Only)
ꢀ : Content Rating can be set.
— : Content Rating can not be set (not normally broadcast by TV Station).
• TV-PARENTAL GUIDELINES (Example)
AGE
D
L
S
V
FV
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
–
–
–
ꢁ
ꢁ
–
–
–
–
ꢁ
ꢁ
ꢁ
–
–
–
ꢁ
ꢁ
ꢁ
–
–
–
ꢁ
ꢁ
ꢁ
–
ꢁ
–
–
–
ꢁ: VIEW
ꢀ: BLOCK
Example 1.1 : Age-Based setting
Go through all select ratings and select unblocked (“– – – –”)
for “AGE”. This will automatically unblock everything.
–
MENU : RETURN
16
10-18 27N-S50
16
6/1/00, 11:42 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
Example 1.2 : Age-Based setting
AGE
D
L
S
V
FV
For “TV-G” select “BLOCK” for “AGE”. This will automatically
block the higher age ratings “TV-PG”, “TV-14”, “TV-MA” and
“TV-G”.
Furthermore, the content ratings “D”, “L”, “S”, “V”, “FV” are
automatically blocked as well for “TV-PG”, “TV-14” and “TV-
MA” in addition to “TV-G”.
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ꢁ
ꢁ
ꢀ
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
ꢀ
–
–
–
–
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
ꢁ
–
–
–
ꢁ: VIEW
ꢀ: BLOCK
–
MENU : RETURN
AGE
D
L
S
V
FV
Example 2.1 : Content-Based setting
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ꢁ
ꢁ
ꢁ
ꢀ
ꢀ
ꢁ
–
–
–
ꢁ
ꢁ
–
–
–
–
ꢁ
ꢁ
ꢁ
–
–
–
ꢁ
ꢁ
ꢁ
–
–
–
ꢁ
ꢁ
ꢁ
–
ꢁ
–
–
–
ꢁ: VIEW
ꢀ: BLOCK
For “TV-PG”, “TV-14” and “TV-MA” select unblocked (“– – – –”)
for each content rating but leave "AGE" blocked for “TV-PG”
and “TV-14” only.
–
MENU : RETURN
AGE
D
L
S
V
FV
Example 2.2 : Content-Based setting
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ꢁ
ꢁ
ꢁ
ꢀ
ꢀ
ꢁ
–
–
–
ꢁ
ꢁ
–
–
–
–
ꢁ
ꢁ
ꢁ
–
–
–
ꢀ
ꢀ
ꢀ
–
–
–
ꢁ
ꢁ
ꢁ
–
ꢁ
–
–
–
ꢁ: VIEW
ꢀ: BLOCK
For “TV-PG”, select "BLOCK" for only “V” (Violence).
This will automatically block the higher ratings “TV-14-V” and
“TV-MA-V” (“TV-14” and “TV-MA” for Violence content only).
Please note that with these settings, blocking does NOT
occur if a program is rated only “TV-MA”; it must be rated
“TV-MA-V” to be blocked.
–
MENU : RETURN
AGE
D
L
S
V
FV
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ꢁ
ꢁ
ꢁ
ꢀ
ꢀ
ꢀ
–
–
–
ꢁ
ꢁ
–
–
–
–
ꢀ
ꢀ
ꢀ
–
–
–
ꢁ
ꢀ
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
ꢁ
–
–
–
ꢁ: VIEW
ꢀ: BLOCK
Example 3 : Reset an Age-Based setting
For “TV-14”, select “BLOCK” for "AGE".
This will again automatically block the content ratings “D”,
“L”, “S”, “V”, “FV” for “TV-MA” in addition to “TV-14”.
Please note that the lower age rating “TV-PG” did not change
from its previous settings.
–
MENU : RETURN
NOTE:
• Content ratings can be modified but only in the combinations indicated by “ꢀ” in the table on
page 16.
• Changing a lower age-rating’s content setting to "BLOCK" automatically changes the same higher
age-rating’s content setting to “BLOCK” regardless of their previous settings.
• Changing a lower rating's “AGE” setting to “BLOCK” automatically changes all higher ratings to
“BLOCK” regardless of their previous settings.
• Any rating's "AGE" set to unblocked (“– – – –”) must have its content settings individually set.
[3] ADDITIONAL MODE
Besides the above “MPAA RATINGS” and “TV PARENTAL GUIDELINES,” new ratings systems
data can be downloaded when they become available. (See page 21.)
17
10-18 27N-S50
17
6/1/00, 11:42 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
LHOW TO SET V-CHIP
REMOTE
KEYPAD
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
[1] MPAA RATING
1 Press MENU to access MAIN MENU screen.
T I MER
V I DEO AD J US T
AUD I O SE L ECT
C LOSED CAP T I ON
PARENT CONTROL
ENERGY SAVE
SE T UP
(MAIN MENU screen)
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “PARENT
CONTROL”.
3 Press VOL (+) or (–) to access PARENT CONTROL mode, then
press VOL (+) or (–) to access V-CHIP select mode.
(PARENT CONTROL mode)
4 Press VOL (+) or (–) to access “MPAA RATING”.
MPAA
T V GU I DE L I NES
DO
S T A TUS
W
N LOAD : OF F
: OF F
(V-CHIP select mode)
5 Press CH UP (8) or DOWN (9) to move the “ ” mark to "PG",
then press VOL (+) or (–) to select BLOCK. If you set “PG” to
BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically blocked.
→
6 Repeat pressing MENU to return V-CHIP select mode exit.
NOTE:
Example:
• If you set “G” to BLOCK, all RATINGS are automatically blocked.
• If you set “X” to BLOCK, “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked.
18
10-18 27N-S50
18
6/1/00, 11:42 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
[2] TV GUIDELINES
1 Repeat steps 1 - 3 of [1] MPAA RATING.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “TV
GUIDELINES”.
3 Press VOL (+) or (–) to access TV GUIDELINES mode.
AGE
D
L
S
V
FV
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
ꢀ
–
–
–
ꢁ: VIEW
ꢀ: BLOCK
–
–
4 To change CONTENT SETTING, press CH UP (8) or DOWN (9)
to move the “ ” to the desired rating and then press VOL (+)
or (–) to select.
–
MENU : RETURN
(TV GUIDELINES mode)
→
TV-PG
AGE
D
L
S
5 Press CH UP (8) or DOWN (9) to move the “ ” to the desired
content and then press VOL (+) or (–) to select either “BLOCK”
or unblock (“ - - - - ”).
BLOCK
— — — —
— — — —
— — — —
— — — —
BLOCK
V
FV
→
MENU : RETURN
(CONTENT SETTING mode)
6 Press MENU to return to TV GUIDES mode.
AGE
D
L
S
V
FV
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ꢀ
ꢁ
ꢀ
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
ꢁ
–
–
–
ꢁ: VIEW
ꢀ: BLOCK
–
–
7 Repeat steps 4 - 5 until all ratings and their contents are set.
–
MENU : RETURN
8 When done, press MENU to exit.
19
19-25 27N-S50
19
6/1/00, 11:43 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
[3] ACTIVATE ON TO TURN ON V-CHIP BLOCK
1 Press CH UP (8) or DOWN (9) to move the “ ” mark to
“STATUS”, then press VOL (+) or (–) to activate the V-CHIP
BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.)
→
2 Press MENU, then “INPUT SECRET No.” will be displayed.
3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD.
4 Press MENU and SECRET No. is registered.
L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.
1 “V-CHIP HAS BEEN ACTIVATED” will be displayed if you watch
the program with Program Rating data the same as you configured.
NOTE:
• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.
2 Press MENU, then “INPUT SECRET No.” will be displayed.
3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD, then
V-CHIP BLOCK will temporarily be canceled. If the wrong SECRET
No. is chosen, “SECRET No. IS INCORRECT” will be displayed.
Input the SECRET No. again in this case.
NOTE:
• If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again.
20
19-25 27N-S50
20
6/1/00, 11:43 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
L To change the V-CHIP BLOCK setting. (Secret No. is registered.)
1 Repeat steps 1 - 3 of [1] MPAA RATING, then “INPUT SECRET
No.” will be displayed.
2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD
and the V-CHIP select mode will be displayed. Repeat
configuration of the V-CHIP BLOCK.
L If you intend to change or have forgotten your Secret No., clear the original Secret No.
and set up a new one.
1 Repeat steps 1 - 3 of [1] MPAA RATING, or 1 - 2 of [ L To cancel
the V-CHIP BLOCK screen while V-CHIP BLOCK has been
activated ], then “INPUT SECRET No.” will be displayed.
2 Press and hold both VOL (+) and CH DOWN (9) on the TV set
(On the set)
VOL
CH
simultaneously until the message “INPUT SECRET No.”
+
9
8
-
disappears.
VOL(+) / CH DOWN(
)
9
3 Press MENU two times to exit.
[3]-A. Additional mode (DOWNLOAD)
There will be an additional new rating system. In that case, please set up as follows.
Subsequently the new rating system will set up automatically.
1 Repeat steps 1 - 3 of [1] MPAA RATING.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to
“DOWNLOAD”.
3 Press VOL (+) or (–) to “DOWNLOAD : ON”.
4 Repeat pressing MENU to exit.
21
19-25 27N-S50
21
6/1/00, 11:43 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
REMOTE
KEYPAD
LDOWNLOAD V-CHIP DATA
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
1 If you watch the program with “New Rating System Data”,
DOWNLOAD screen will be displayed.
(DOWNLOAD screen)
2 DOWNLOAD screen will disappear, if DOWNLOAD is finished.
NOTE:
• DOWNLOAD would not be started if you don’t watch the program with “New Rating System
Data”.
[3]-B. Additional mode (Example)
1 Repeat steps 1 - 2 of [3] Additional mode.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “Cdn.
English Ratings”, then press VOL (+) or (–).
→
(After downloading the rating data)
3 You can select “BLOCK” or “– – – – –” (unblock) from each RATING
C
C8+
G
PG
14+
18+
: —————
: BLOCK
: —————
: BLOCK
: —————
: BLOCK
mode by pressing CH UP (8) or DOWN (9) and VOL (+) or (–).
I ND I V I DUAL BLOCK
MENU : RETURN
(ENGLISH INDIVIDUAL BLOCK mode)
4 You can select “BLOCK” or “– – – – –” (unblock) from each RATING
mode by pressing CH UP (8) or DOWN (9) and VOL (+) or (–)
if you select “Cdn. French Ratings” in step 2.
NOTE:
(FRENCH INDIVIDUAL BLOCK mode)
• In additional mode
Including two types (English mode, French mode), altogether you are able to download four
kinds of mode.
22
19-25 27N-S50
22
6/1/00, 11:43 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (VIEW TIMER)
L
VIEW TIMER
This function allows you to restrict TV viewing time and also allows you to control TV usage.
This function is to prevent your children from watching too much TV.
VIEWING TIME (an accumulative timer: counts only the time
duration acquired while the TV is on.)
• VIEWING TIME can be set from 30M (30 minutes) to 10H00M
(10 hours) in 30 minutes intervals.
OFF TIME (Restricts TV watching after the VIEWING TIME reaches
zero.)
• OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours)
in 30 minutes intervals.
STATUS (ON/OFF setting of VIEW TIMER)
L
How to set VIEW TIMER.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “PARENT
CONTROL”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access PARENT CONTROL mode.
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to “VIEW
TIMER”.
→
(PARENT CONTROL mode)
5 Press VOL (+) or (–) to access “VIEW TIMER”.
6 Press CH UP (8) or DOWN (9) to select “VIEWING TIME” and
“OFF TIME”. For each selection, press the VOL (+) or (–) to set
the time duration.
→
7 Press CH UP (8) or DOWN (9) to select “STATUS”. Press the
VOL (+) or (–) to turn ON the “VIEWING TIMER”. (If STATUS is
OFF, VIEW TIMER is not operated)
→
8 Press MENU. “INPUT SECRET No.” will be displayed.
23
19-25 27N-S50
23
6/1/00, 11:43 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (VIEW TIMER Continued)
9 Enter the 4-digit SECRET No. using the REMOTE KEYPAD.
10Press MENU, and SECRET No. is registered.
→
Example:
• To restrict anybody from watching the TV for 5 hours, after
watching the TV for 2 hours, your settings would look like this:
• They can choose to watch the 2 hours of TV however they wish.
For example, they could watch 1 hour of TV, turn TV off for 30
minutes, then turn TV on and watch the remaining 1 hour on the
VIEWING TIMER.
L
To change the VIEW TIMER settings. (SECRET No. is registered)
1 Repeat “How to set VIEW TIMER” steps and select
“PARENT CONTROL VIEW TIMER” during step
3. Press VOL (+) or (–), and “INPUT SECRET No.”
will be displayed.
2 Enter the 4-digit SECRET No. using the REMOTE
KEYPAD, and the VIEW TIMER access screen
will be displayed. Repeat step 5 - 6.
NOTE:
• When you choose the correct SECRET No., the VIEW TIMER
access screen is displayed. If the wrong SECRET No. is chosen,
“SECRET No. IS INCORRECT” is displayed. Input the SECRET
No. again in this case.
L
To cancel the VIEW TIMER (While the TV set is OFF but the
VIEW TIMER is set)
1 Turn on TV; a blue screen message “TIME OVER” will appear. If
you do nothing, the TV will turn off in approximately 30 seconds.
2 Enter the 4-digit SECRET No. using the REMOTE
KEYPAD. When you choose the correct
SECRET No., the VIEW TIMER is canceled. If
the wrong SECRET No. is chosen, “SECRET
No. IS INCORRECT” is displayed. Input the
SECRET No. again in this case.
L
To cancel the VIEW TIMER setting or change the SECRET
No. (When you forget the SECRET No.)
1 Repeat “How to set VIEW TIMER” steps and
select “PARENT CONTROL VIEW TIMER” during
step 3. Press VOL (+) or (–), and “INPUT SECRET
No.” will be displayed.
24
19-25 27N-S50
24
6/1/00, 11:43 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (VIEW TIMER Continued)
(On the set)
2 Press and hold both VOL (+) and CH DOWN (9) on the TV set
simultaneously until the VIEW TIMER access screen is displayed.
Now you can cancel the VIEW TIMER settings or can change the
SECRET No. while “INPUT SECRET No.” is displayed.
VOL
CH
+
9
8
-
VOL(+) / CH DOWN(
)
9
L
Notice of Remaining VIEWING TIME
• For every 30 minute interval, the “remaining time” will be displayed
for four seconds. For the last five minutes, the “remaining time”
will be displayed every minute.
• “0 REMAIN” will be displayed for 10 seconds just before the
VIEWING TIME is completed.
Energy Save
L
This feature lets you lower the power consumption of your TV
set which in turn saves you money and minimizes the impact on
the environment. When this feature is turned on, it reduces the
brightness of the TV to a level that consumes approximately 20
percent less energy than when the feature is turned off. The
reduction in brightness will be less noticeable under low room
lighting conditions.
REMOTE
KEYPAD
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “ENERGY
SAVE”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access ENERGY SAVE select mode.
(ENERGY SAVE select mode)
4 Press VOL (+) or (–) to select “ON”.
5 Press MENU to exit.
25
19-25 27N-S50
25
6/1/00, 11:43 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up
REMOTE
KEYPAD
L
EZ SETUP
By operating the channel presetting functions, you can preset
your TV to the desired channels for viewing.
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET
UP”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access SET UP mode, then press
CH UP (8) or DOWN (9) to move the “ ” mark to “CH SETTING”.
→
(SET UP mode)
4 Press VOL (+) or (–) to access CH SETTING mode.
(CH SETTING mode)
5 Press VOL (+) or (–) to access EZ SETUP mode.
(EZ SETUP mode)
6 Press VOL (+).
The tuner will automatically search for the
broadcasting and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once
it has started, press VOL (–). Search will be
canceled.
To cancel EZ SETUP
Press VOL (–).
7 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
26
26-29 27N-S50
26
6/1/00, 11:44 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up (Continued)
L
CHANNEL SETTING
If EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to
“SET UP”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access SET UP mode.
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to
“CH SETTING”.
→
(SET UP mode)
5 Press VOL (+) or (–) to access CH SETTING mode.
(CH SETTING mode)
(CH SETTING mode)
6 Press CH UP (8) or DOWN (9) to move the “ ” mark to the
“AIR/CABLE”, then press VOL (+) or (–) to access
AIR/CABLE mode.
→
7 Press CH UP (8) or DOWN (9) to move the “ ” mark to the
desired mode.
(AIR/CABLE mode)
8 Press MENU to exit.
NOTE:
• Receivable channels of your TV set are:
AIR channels: VHF: 2 through 13.
UHF: 14 through 69.
CABLE channels: 1 (HRC and IRC mode only)
2 through 125 (STD, HRC and IRC)
27
26-29 27N-S50
27
6/1/00, 11:44 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up (Continued)
L
Saving broadcast TV channels into memory.
1.1 Press MENU to access MAIN MENU
screen, then press CH UP (8) or
DOWN (9) to move the “ ” mark to “SET
UP”.
→
→
1.2 Press VOL (+) or (–) to access SET UP
mode, then press CH UP (8) or
DOWN (9) to move the “ ” mark to “CH
SETTING”.
(CH SETTING mode)
1.3 Press VOL (+) or (–) to access CH
SETTING mode.
1.4 Press CH UP (8) or DOWN (9) to move
the “ ” mark to “CH SEARCH”, then press
VOL (+) or (–) to access CH SEARCH
mode.
→
(START)
START
2.1 Press VOL (+). The tuner will search
through all available channels in your area
and add them into the TV’s memory.
STOP
(STOP)
2.2 Press VOL (–). CH SEARCH will stop at
the current channel and will not add any
higher channels.
(CH SEARCH mode)
2.3 Press MENU to exit.
L
Adding weak or additional channels or erasing unwanted channels from TV memory.
1.1 Press MENU to access MAIN MENU
screen, then press CH UP (8) or
DOWN (9) to move the “ ” mark to “SET
UP”.
→
1.2 Press VOL (+) or (–) to access SET UP
mode, then press CH UP (8) or
DOWN (9) to move the “ ” mark to “CH
SETTING”.
→
(CH SETTING mode)
1.3 Press VOL (+) or (–) to access CH
SETTING mode, then press CH UP (8) or
DOWN (9) to move the “ ” mark to “CH
MEMORY”.
→
2.1 Press VOL (+) or (–) to access CH MEMORY.
2.2 Use CH UP (8) or DOWN (9) or REMOTE
KEYPAD to select each desired channel
to add or erase.
or
2.3 Press VOL (+) to add a channel to the TV’s
memory or press VOL (–) to erase a
channel from the TV’s memory.
28
26-29 27N-S50
28
6/1/00, 11:44 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up (Continued)
2.4 Press MENU to exit.
VOL (+)
REMOTE
KEYPAD
To add channel 12 to the
TV memory
VOLUME
(+)/(–)
VOL (–)
To erase channel 12 from
the TV memory
CHANNEL
UP (8)/
(CH MEMORY
unmemorized channel)
(CH MEMORY
memorized channel)
DOWN (9)
MENU
NOTE:
• If you press VOL (+) again while in the CH SEARCH mode, auto-program will start again, and the
previously memorized channels will be lost.
L
BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not received.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to
“SET UP”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access SET UP mode.
(SET UP mode)
4 Press VOL (+) or (–) to access BLUE SCREEN select mode.
(BLUE SCREEN select mode)
5 Press VOL (+) or (–) to select “ON”.
6 Press MENU to exit.
NOTE:
• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch
the BLUE SCREEN “OFF”.
• While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if the
BLUE SCREEN is turned on.
29
26-29 27N-S50
29
6/1/00, 11:44 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Video and Audio Input Jacks
L
Connecting video equipment for playback of video material.
• When the television is connected to video equipment as shown below, the material being played
back on the video equipment can be seen on the television screen.
Connecting video device equipped with video output terminal.
(Front connection
terminals of TV)
CONNECTIONS
VIDEO EQUIPMENT
VIDEO
L
AUDIO
R
To VIDEO
OUTPUT
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
(Rear connection
terminals of TV)
IN 1
TV Game
Camcorder
To VIDEO
OUTPUT
To AUDIO OUTPUT (R)
To AUDIO OUTPUT (L)
VCR
L
To watch video material playback.
• Press the Remote’s INPUT to select VIDEO INPUT mode to which the video equipment you want to
playback is connected.
• The external VIDEO INPUT mode will change as follows each time the INPUT is pressed.
• INPUT mode can be selected by pressing either the CH UP (8) on the TV remote control when the
TV is set to the highest channel stored in memory, or by pressing the CH DOWN (9) when it is set to
the lowest channel.
NOTE:
• When connecting video or audio equipment to the television, be sure that the power is turned off in
order to prevent damage to either the television or the equipment being connected.
• It is the intent of SHARP that this product be used in full compliance with the copyright law and that
prior permission be obtained from copyright owners whenever necessary.
• For detailed information on the connection and use of auxiliary equipment, refer to the instruction
manuals of the equipment being used.
• The connection cords can be obtained from your local video store.
30
30-36 27N-S50
30
6/1/00, 11:45 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Calling for Service
Check these items and see if you can correct trouble with a slight adjustment of the controls.
QUICK SERVICE
CHECK LIST
POSSIBLE REMEDY
Try a new channel, if OK, then possible
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
station trouble.
X
X
X
Is TV plugged in? Power at outlet?
Is TV’s POWER button on?
Is antenna connected to terminal on the
back of the set?
X
X
X
X
If outside antenna is being used, check
for broken wire.
X
X
X
X
X
X
X
X
X
X
X
X
X
Check for local interference or external
electrical noise.
X
X
Turn off with POWER button and then
turn it on after about a minute.
X
X
X
X
Adjust COLOR control.
Adjust PICTURE control.
X
X
X
X
Check external Video/Audio products:
look for loose/broken connection leads.
(Refer to page 30)
X
X
X
X
X
X
X
Check batteries of Remote Control.
Change Closed Caption mode to
“OFF”/ Energy Save mode to “OFF”.
X
X
Unplug the TV and plug it in again after
two minutes.
X
X
X
X
X
NOTE:
• When viewing in TEXT mode, if no TEXT broadcast is being received,
the screen may become dark and blank. Should this occur, set the
Closed Caption mode to “OFF”.
(Dark and Blank Picture)
Calling for Service
For location of the nearest SharpAuthorized Servicers, or to obtain product literature accessories, supplies,
or customer assistance, please call 1-800-BE-SHARP.
31
30-36 27N-S50
31
6/1/00, 11:45 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Antes de llamar al servicio de reparaciones
Verifique estos items para ver si usted mismo puede solucionar el problema.
LISTA DE
COMPROBACIONES
DE SERVICIO
RAPIDO
POSIBLE SOLUCIÓN
Pruebe con otro canal y si todo está bien,
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
el problema puede ser de la emisora.
Está conectado el televisor? Llega
electricidad al tomacorrientes?
X
X
X
Está conectado el interruptor del televisor?
Está conectado la antena al terminal del
panel posterior del televisor?
X
X
X
X
X
X
X
X
X
X
X
X
X
Si utiliza una antena exterior, cerciórese
de que el cable no esté dañado.
X
X
X
X
X
X
X
X
Compruebe si hay interferencia local.
Desconecte el interruptor POWER y
vuelva a conectarlo después de transcurrir
un minuto.
X
X
X
X
Ajuste el control de COLOR.
Ajuste el control de MATIZ.
X
X
X
X
Verifique los productos externos de Video/
Audio, revise si hay gufas de conexiones
sueltas o rotas.
X
X
X
Compruebe el estado de las pilas del
mando a distancia.
X
X
Desactive (OFF) el modo CLOSED
CAPTION / Desactive (OFF) el modo
Ahorro de Energía (Energy Save).
X
X
Desenchufe el televisor y vuelva a
enchufarlo despúes de dos minutos.
X
X
X
X
X
X
X
NOTA:
• Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la pantalla
puede ponerse en blanco y negro. Si ocurriera ésto, ponga el modo CLOSED
CAPTION en OFF.
(Imagen oscura y en blanco)
32
30-36 27N-S50
32
6/1/00, 11:45 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
33
30-36 27N-S50
33
6/1/00, 11:45 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
34
30-36 27N-S50
34
6/1/00, 11:45 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product
(the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and
agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or
remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth
below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper
voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and
provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by
law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
USEARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do
not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of
Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole
and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time
described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser
with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence,
strict liability or otherwise. In no event shall Sharp be liable or in any way responsible, for any damages or defects in
the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized
servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property
damage. Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion
may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH
VARY FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
27N-S50, 27 inch Color Television
(Be sure to have this information available when you need
service for your Product.)
Warranty Period for this Product:
One (1) year parts and 90 days labor for 25 inch models; one
(1) year parts and one (1) year labor for 27, 32, and 36 inch
models. The warranty period continues for an additional one (1)
year, for a total of two (2) years, with respect to the picture tube(s)
in the Product for parts only. Labor and service are not provided
free of charge for this additional period.
Additional Item(s) Excluded from
Warranty Coverage (if any):
Non-rechargeable batteries.
Where to Obtain Service:
From a Sharp Authorized Servicer located in the United States.
To find the location of the nearest Sharp Authorized Servicer,
call Sharp toll free at 1-800-BE-SHARP.
What to Do to Obtain Service:
Contact your Sharp Authorized Servicer to obtain in-home
service for this Product. The Servicer will come to your home
and if it is necessary to remove the Product, the Servicer will
reinstall it. Be sure to have Proof of Purchase available.
35
30-36 27N-S50
35
6/1/00, 11:45 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
Printed in U.S.A.
TINS-6931MEN1
T2386-A (T2386-A)
36
30-36 27N-S50
36
6/1/00, 11:45 AM
Download from Www.Somanuals.com. All Manuals Search And Download.
|