Sharp CRT Television 25R S100 User Manual
COLOR TELEVISION  
MODEL  
25R-S100  
L OPERATION MANUAL L  
A
E
s an  
E
NERGY  
S
TAR ®  
P
artner, SHARP has determined that this product meets the  
NERGY  
trademark.  
S
TAR ® guidelines for energy efficiency.  
E
NERGY  
S
TAR ® is a U.S. registered  
CONTENTS  
PAGE  
PAGE  
• Important Information .........................................2 ~ 3  
• Important Safeguards .........................................3 ~ 4  
• Supplied Accessories ...............................................5  
• Before Operating Your Television ............................. 5  
• Antenna Connections .........................................5 ~ 6  
• Quick Reference Control Operation .................. 7 ~ 9  
• EZ SETUP during First Power On .......................... 10  
• Demo Mode ............................................................ 11  
• Accessing the MAIN MENU screen without  
Remote Control ...................................................... 11  
• Language ............................................................... 12  
• Sleep Timer ............................................................ 12  
• Video Adjust ........................................................... 13  
• Audio Select ........................................................... 14  
MTS (MULTICHANNEL TV SOUND) .................. 14  
• Closed Caption ....................................................... 15  
• Parent Control ................................................ 16 ~ 26  
V-CHIP ........................................................ 16 ~ 23  
VIEW TIMER .............................................. 24 ~ 26  
• Energy Save ........................................................... 26  
• Set Up ............................................................ 27 ~ 32  
EZ Setup ............................................................. 27  
Channel Setting .......................................... 28 ~ 30  
Blue Screen ........................................................ 30  
Personal Reference ............................................ 31  
Universal Plus Function ...................................... 32  
• Using the Video and Audio Input Jacks .......... 33 ~ 34  
• Operation of Remote Control ......................... 35 ~ 39  
• Before Calling for Service............................... 40 ~ 41  
• Calling for Service .................................................. 40  
• Specifications ......................................................... 42  
• Limited Warranty .................................................... 43  
This operating manual includes basic operating  
instructions in Spanish and French.  
SPANISH is on page 8, 41.  
FRENCH is on page 9.  
7290 GJ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Information (Continued)  
WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not  
expressly approved by the manufacturer could void the user’s authority to operate this  
equipment.  
PRODUCT DISPOSAL  
This product utilizes a Cathode Ray Tube (CRT) containing lead and tin lead solder.  
Disposal of these materials may be regulated due to environment considerations. For disposal or  
recycling information, please contact your local authorities or the Electronics Industries  
Alliance:www.eiae.org  
Important Safeguards  
CAUTION: Please read all of these instructions before you operate your television and save these  
instructions for later use.  
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure  
your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE  
HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic  
rules for its installation, use and servicing.  
1. Unplug this television equipment from the wall outlet before cleaning.  
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
3. Do not use attachments not recommended by the television equipment manufacturer as they may cause  
hazards.  
4. Do not use this television equipment near water — for example, near a bathtub, washbowl, kitchen sink or  
laundry tub, in a wet basement, or near a swimming pool, etc.  
5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing  
serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand  
recommended by the manufacturer or sold with the television equipment.  
6. Television equipment and cart combination should be moved with care. Quick stops,  
excessive force, and uneven surfaces may cause the equipment and cart combination to  
overturn.  
7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a  
mounting kit approved by the manufacturer.  
8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To insure reliable  
operation of the television equipment and to protect it from overheating, these openings must not be blocked  
or covered. This television equipment should not be placed in a built-in insulation such as a bookcase  
unless proper ventilation is provided.  
9. The openings should never be covered with a cloth or other material, and the bottom openings should not  
be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television  
equipment should never be placed near or over a radiator or heat register.  
10. This television equipment should be operated only from the type of power source indicated on the marking  
label. If you are not sure of the type of power supplied to your home, consult your television dealer or local  
power company.  
For television equipment designed to operate from battery power, refer to the operating instructions.  
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger  
than the other). The 2-wire polarized plug will fit only one way into the power outlet.  
If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and  
defeat this safety feature.  
12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will  
be abused by persons walking on it.  
13. Follow all warnings and instructions marked on the television equipment.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safeguards (Continued)  
14. Ifanoutsideantennaisconnectedtothetelevisionequipment,besuretheantennasystemisgrounded  
so as to provide some protection against voltage surges and built-up static charges. Section 810 of  
the National Electrical Code provides information with respect to proper grounding of the mast and  
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding  
conductors,locationofantenna-dischargeunit,connectiontogroundingelectrodes,andrequirements  
for the grounding electrode.  
EXAMPLE OF ANTENNA GROUNDING  
ACCORDING TO NATIONAL ELECTRICAL CODE.  
ANTENNA LEAD-IN WIRE  
GROUND CLAMP  
ANTENNA DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
SERVICE  
EQUIPMENT  
GROUND CLAMPS  
POWER SERVICE GROUNDING ELECTRODE SYSTEM  
(NEC PART 250, PART H)  
NEC - NATIONAL ELECTRICAL CODE  
15. For added protection for this television equipment during a lightning storm, or when it is left unattended  
and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This  
will prevent damage to the equipment due to lightning and power-line surges.  
16. Anoutsideantennasystemshouldnotbelocatedinthevicinityofoverheadpowerlinesorotherelectric  
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside  
antenna system, extreme care should be taken to keep from touching such power lines or circuits as  
contact with them might be fatal.  
17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.  
18. Never push objects of any kind into this television equipment through cabinet slots as they may touch  
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid  
of any kind on the television equipment.  
19. Do not attempt to service this television equipment yourself as opening or removing covers may  
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.  
20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel  
under the following conditions:  
A. When the power cord or plug is damaged or frayed.  
B. If liquid has been spilled into the television equipment.  
C. If the television equipment has been exposed to rain or water.  
D. Ifthetelevisionequipmentdoesnotoperatenormallybyfollowingtheoperatinginstructions.Adjust  
only those controls that are covered by the operating instructions as improper adjustment of other  
controls may result in damage and will often require extensive work by a qualified technician to  
restore the television equipment to normal operation.  
E. If the television equipment has been dropped or the cabinet has been damaged.  
F. When the television equipment exhibits a distinct change in performance — this indicates a need  
for service.  
21. Upon completion of any service or repairs to this television equipment, ask the service technician to  
perform routine safety checks to determine that the television is in safe operating condition.  
22. When replacement parts are required, be sure the service technician has used replacement parts  
specified by the manufacturer that have the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock, or other hazards.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Supplied Accessories  
Size AA  
Dry Batteries  
Infrared Remote Control/Part Number  
RRMCG1626CESA  
Before Operating Your Television  
Location  
• For normal operation, your TV should be located in an area of the room where cool adequate ventilation  
is provided. Do not place the back of the television set in a place where free airflow will be restricted.  
• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using  
magnets or any other magnetic substance, such as iron are kept well away from this TV set.  
Power  
Your TV operates on 120 Volts, 60 Hertz (normal household current) and has a polarized plug. If you  
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an  
electrician. Do not defeat the safety feature of the polarized plug.  
Note:  
• If the set will not be used for a long period, such as during a vacation, unplug the set from the wall  
outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the  
POWER BUTTON in the OFF position.)  
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near  
the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off  
either the TV or the radio.  
• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received  
due to the interference of the TV.  
L
Before using the television, prepare the Remote Control  
To use the remote control, insert batteries first.  
Insert the batteries  
Pull up  
Battery  
Cover  
• With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert two  
batteries (size “AA”). Be sure to match the battery e/d terminals with the e/d marks inside the  
compartment.  
Antenna Connections  
Antennas  
• The antenna requirements for good color television reception are more important than those for  
black & white television reception. For this reason, a good quality outdoor antenna is strongly  
recommended.  
The following is a brief explanation of the type of connections that are provided with the various  
antenna systems:  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Antenna Connections (Continued)  
F-type connector  
1. A 75 ohm system is generally a round cable  
with F-type connector that can easily be  
attached to a terminal without tools (not  
supplied).  
75-ohm coaxial cable (round)  
300-ohm twin-lead cable (flat)  
2. A 300 ohm system is a flat “twin-lead” cable  
that can be attached to a 75 ohm terminal  
through a 300-75 ohm ADAPTOR (not  
supplied).  
OUTDOOR ANTENNA CONNECTION  
• Use one of the following two diagrams if you connect an outdoor antenna.  
A: Using a VHF/UHF combination outdoor antenna.  
B: Using separate VHF and/or UHF outdoor antenna.  
• Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the  
TV set.  
A. Combination VHF/UHF Antennas  
B. Separate VHF/UHF Antenna  
REAR OF TV  
VHF/UHF ANTENNA  
300/75-ohm  
ADAPTOR  
VHF/UHF ANTENNA  
or  
(Not supplied)  
VHF  
UHF  
300-ohm  
twin-lead  
ANTENNA ANTENNA  
300-ohm  
twin-lead  
75-ohm  
coaxial cable  
COMBINER  
(not supplied)  
300-ohm  
twin-lead  
IN OUT  
75-ohm coaxial  
cable  
or  
REAR OF TV  
CABLE TV (CATV) CONNECTION  
• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm  
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.  
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay  
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber  
by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled  
channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,  
consult your cable TV company.) For more specific instructions on installing cable TV, consult your  
cable TV company. One possible method of utilizing the converter/descrambler provided by your  
cable TV company is explained below.  
Please note: RF switch equipped with position A/B (not provided) is required.  
“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s  
channel keys.  
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/  
descrambler using the converter’s channel keys.  
RF switch (not supplied)  
Two-set  
A
signal  
OUT  
IN  
B
splitter  
(not  
Cable TV Line  
IN  
OUT  
supplied)  
Cable TV converter/  
descrambler  
(not supplied)  
Note:  
• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that  
might be required.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Reference Control Operation  
L Location of Controls  
(ENGLISH)  
Front Panel  
POWER  
VIDEO/AUDIO IN2 TERMINALS  
CHANNEL UP/DOWN  
(8) Selects next higher channel.  
(9) Selects next lower channel.  
• Press both at the same time to  
access the MAIN MENU screen.  
Press → On.  
Press again → Off.  
SENSOR AREA FOR  
REMOTE CONTROL  
MENU  
Press → Accesses MAIN MENU.  
VOLUME UP/DOWN  
(+) Increases sound.  
(–) Decreases sound.  
Press again → Exits MAIN MENU.  
Basic Remote Control Functions  
Infrared Transmitter Window  
POWER  
Press → On.  
DISPLAY  
Press again → Off.  
Press → Displays receiving channel for  
POWER  
four seconds.  
TV  
DVD  
VCR  
REMOTE KEYPAD  
Accesses any channel from keypad.  
DISPLAY  
INPUT  
Press again → Removes display.  
• Temporarily displays receiving  
channel when in Closed Caption  
mode.  
FLASHBACK  
Returns to previous channel.  
1
4
7
2
5
8
0
3
6
9
INPUT  
PERSONAL PREFERENCE  
Press → Switch to external video  
With the Personal Preference buttons,  
you can program your favorite  
programs by using the 4 categories A,  
B, C and D. The channels can be  
INPUT 1 mode.  
FLASHBACK  
ENTER  
Press 2 times → Switch to external video  
INPUT 2 mode.  
100  
PERSONAL PREFERENCE  
Press 3 times → Switch back to the  
A
B
C
D
accessed quickly by using these  
buttons. (See page 31.)  
original TV mode.  
CH  
CH  
VOL  
—
VOL  
+
See page 34.  
VOLUME UP/DOWN  
(+) Increases sound.  
(–) Decreases sound.  
ENTER  
MENU  
MUTE  
Used in some instances where a Cable  
Converter Box requires an “enter”  
command after selecting channels,  
when using the REMOTE KEYPAD  
button. (See page 35)  
CATV  
DVD  
TV  
•
In menu mode, changes or selects  
the TV adjustments.  
VCR  
MENU  
REW  
PLAY  
FF  
Press → Accesses MAIN MENU.  
CH/SKIP  
Press again → Exits MAIN MENU.  
PAUSE STOP  
REC  
CHANNEL UP/DOWN  
(8) Selects next higher channel.  
(9) Selects next lower channel.  
• See pages 28 ~ 30 for channel  
presetting.  
• Moves the “  
screens.  
CATV/DVD-TV/VCR MODE SELECT  
SWITCH  
In TV/VCR position, sends power and  
channel select commands (Channel  
up/down and RandomAccess buttons)  
to the TV and VCR control.  
In CATV/DVD position, sends power  
and channel select commands to a  
cable TV converter and DVD control.  
” mark of the MENU  
TV • CATV • VCR • DVD  
MUTE  
Press → Mutes sound.  
Press again → Restores sound.  
• CLOSED CAPTION appears when  
sound is muted.  
DVD/VCR CONTROL  
See page 35.  
Note:  
•
The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the remote  
control, place it under a fluorescent light or other lighting.  
•
•
•
•
•
The phosphorescent material contains no radioactive or toxic material, so it is safe to use.  
The degree of illumination will vary depending on the strength of lighting used.  
The degree of illumination will decrease with time and depending on the temperature.  
The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.  
Sunlight and fluorescent lighting are the most effective when charging the display.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Referencia rápida de los controles de operación  
L Ubicación de los controles  
(ESPAÑOL)  
Panel Delantero  
ALIMENTACION (POWER)  
TERMINALES DE ENTRADA  
VIDEO/AUDIO IN2  
Pulsando → Enciende (On).  
Pulsando nuevamente → Apaga (Off).  
ZONA DEL SENSOR DEL  
MANDO A DISTANCIA  
MENU (MENU)  
CANAL SUPERIOR/INFERIOR (CH) – MENU  
(8) Selecciona el siguiente canal superior.  
(9) Selecciona el siguiente canal inferior.  
• Pulse ambos al mismo tiempo para acceder a  
la pantalla de MENU PRINCIPAL.  
Pulsando → Accede al MENU  
AUMENTO/DISMINUCION  
PRINCIPAL.  
DEL VOLUMEN (VOL)  
(+) Aumenta el sonido.  
(–) Disminuye el sonido.  
Pulsando nuevamente → Sale del MENU  
PRINCIPAL.  
Funciones Basicas Del Control Remoto  
ALIMENTACION (POWER)  
Ventanilla del transmisor de infrarrojos  
Pulsando → Enciende (On).  
VISUALIZACION (DISPLAY)  
Pulsando nuevamente → Apaga (Off).  
TECLADO A DISTANCIA  
(REMOTE KEYPAD)  
Para tener acceso a cualquier canal  
empleando las teclas.  
RETORNO AL CANAL  
ANTERIOR (FLASHBACK)  
Para volver al canal anterior.  
PREFERENCIAS PERSONALES  
Con los botones Personal Preference  
puede programar sus programas favoritos  
utilizando las cuatro categorías A, B, C y D.  
Puede acceder a los canales rápidamente  
utilizando estos botones.  
Pulsando  
→
Aparece el canal de  
POWER  
recepción por cuatro segundos.  
Pulsando nuevamente → Elimina la  
visualización.  
TV  
DVD  
VCR  
DISPLAY  
INPUT  
•
En el modo de “Closed Caption” se  
muestra el canal de recepción por un  
corto tiempo.  
1
4
7
2
5
8
0
3
6
9
ENTRADA (INPUT)  
Pulsando → Cambia al modo de entrada  
1 del vídeo externo.  
Pulsando 2 veces → Cambia al modo de  
entrada 2 del vídeo externo.  
Pulsando 3 veces → Vuelve al modo TV  
original.  
FLASHBACK  
ENTER  
100  
PERSONAL PREFERENCE  
A
B
C
D
CH  
CH  
VOL  
—
VOL  
+
AUMENTO/DISMINUCION DEL  
VOLUMEN (VOLUME UP/DOWN)  
(+) Aumenta el sonido.  
INTRODUCIR (ENTER)  
MENU  
MUTE  
Se utiliza en algunos casos en los cuales  
una Caja de Inversor de Cable requiere  
una orden “enter” después de seleccionar  
los canales, al usar el teclado a distancia.  
(–) Disminuye el sonido.  
•
En modo de MENU cambia  
o selecciona el ajuste del televisor.  
CATV  
DVD  
TV  
VCR  
PREPARACION (MENU)  
CANAL SUPERIOR/INFERIOR  
(CHANNEL UP/DOWN)  
(8) Selecciona el siguiente canal superior.  
(9) Selecciona el siguiente canal inferior.  
Pulsando →Accede al MENU PRINCIPAL.  
Pulsando nuevamente → Sale del  
MENU PRINCIPAL.  
REW  
PLAY  
FF  
CH/SKIP  
PAUSE STOP  
REC  
CONMUTADOR SELECTOR DE  
TELEVISOR/TV POR CABLE (CATV/  
DVD-TV/VCR)  
•
En el modo de MENU, mueve la marca  
”.  
“
En la posición TV/VCR, el mando envia  
los comandos de alimentación y selección  
de canales (botones de canal superior/  
inferior y de acceso aleatorio) a un  
televisor y a un control de VCR.  
En la posición CATV/DVD, envia los  
comandos de alimentación y selección de  
canales a un convertidor de TV por cable  
y a un control de DVD.  
SILENCIAMIENTO (MUTE)  
Pulsando → Silencia el sonido.  
Pulsando nuevamente → Restaura el  
sonido.  
TV • CATV • VCR • DVD  
•
CLOSED CAPTION aparece automática-  
mente cuando el sonido es silenciado.  
Siempre y cuando la transmisión tenga  
esta señal.  
CONTROLES DEL DVD/VIDEO  
Note:  
•
Los botones que arriba pueden verse sombreados en el Control Remoto lucen en la oscuridad. Para usar el visor del control  
remoto que luce en la oscuridad, colocarlo bajo una luz fluorescente u otra fuente luminosa.  
El material fosforescente no contiene elementos radiactivos ni tóxicos, de modo que su uso no representa ningún peligro.  
El grado de iluminación variará de acuerdo con la potencia de la luz utilizada.  
El grado de iluminación irá decayendo con el tiempo y dependiendo de la temperatura.  
El tiempo necesario para cargar el visor fosforescente variará de acuerdo con la iluminación circundante.  
La luz del sol y la luz fluorescente son las más eficaces para la carga del visor.  
•
•
•
•
•
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Référence rapide sur les commandes  
L Emplacement des touches  
(FRANÇAIS)  
Panneau Avant  
ALIMENTATION (POWER)  
Appuyer pour mettre sous tension.  
Appuyer de nouveau pour mettre  
hors tension.  
PRISES D’ENTRÉE  
VIDÉO/ AUDIO IN2  
ZONE DE DETECTION DU  
CAPTEUR  
RÉGLAGE (MENU)  
TOUCHES DES CANAUX CROISSANT/  
DÉCROISSANT (CH) – MENU  
(8) Sélectionne le canal supérieur suivant.  
(9) Sélectionne le canal inférieur précédent.  
• Appuyez simultanément sur ces deux  
touches pour accéder à l’écran MENU  
PRINCIPAL.  
Appuyer → Accès au MENU  
AUGMENTATION/RÉDUCTION DU  
VOLUME SONORE (VOL)  
PRINCIPAL.  
Appuyer de nouveau → Sortie  
du MENU PRINCIPAL.  
(+) Pour augmenter le volume du son.  
(–) Pour diminuer le volume du son.  
Fonctions de base de la télécommande  
Fenêtre d’émission du signal infrarouge  
ALIMENTATION (POWER)  
Appuyer pour mettre sous tension.  
Appuyer de nouveau pour mettre hors  
tension.  
AFFICHAGE (DISPLAY)  
Appuyer pour afficher le canal reçu  
pendant quatre secondes.  
Appuyer de nouveau pour faire disparaître  
le canal.  
POWER  
TV  
DVD  
VCR  
DISPLAY  
INPUT  
PAVE NUMERIQUE DE COMMANDE A  
DISTANCE (REMOTE KEYPAD)  
Sélectionne directement le canal voulu  
sur le pavé numérique.  
•
Pour afficher temporairement le canal  
reçu en mode Sous-titres.  
1
4
7
2
5
8
0
3
6
9
ENTRÉE (INPUT)  
Appuyer pour sélectionner le mode  
ENTRÉE 1 vidéo externe.  
Appuyer 2 fois pour sélectionner le  
mode ENTRÉE 2 vidéo externe.  
Appuyer 3 fois pour revenir au mode TV  
initial.  
RETOUR (FLASHBACK)  
Rappelle le canal regardé précédent.  
FLASHBACK  
ENTER  
PREFERENCES PERSONNELLES  
Grâce aux touches de préférence  
personnelle, vous pouvez programmer  
vos programmes préférés à l’aide des 4  
catégories:  
A, B, C et D. Ces touches vous permettent  
d’accéder rapidement à ces canaux.  
100  
PERSONAL PREFERENCE  
A
B
C
D
CH  
CH  
ENTRER (ENTER)  
VOL  
—
VOL  
+
Parfois utilisée lorsqu’un convertisseur  
nécessite l’introduction d’une commande  
“enter” après la sélection de canaux à  
l’aide du pavé numérique de commande  
à distance.  
MENU  
MUTE  
AUGMENTATION/RÉDUCTION DU  
VOLUME SONORE (VOLUME UP/DOWN)  
(+) Pour augmenter le volume du son.  
(–) Pour diminuer le volume du son.  
CATV  
DVD  
TV  
VCR  
TOUCHES DES CANAUX CROISSANT/  
DÉCROISSANT (CHANNEL UP/DOWN)  
(8) Sélectionne le canal supérieur suivant.  
(9) Sélectionne le canal inférieur précedént.  
•
Pour changer ou sélectionner les  
réglages du téléviseur en mode menu.  
REW  
PLAY  
FF  
CH/SKIP  
PAUSE STOP  
REC  
RÉGLAGE (MENU)  
•
Déplace le curseur “  
MENU.  
” sur l’écran du  
Appuyer → Accès au MENU PRINCIPAL.  
Appuyer de nouveau → Sortie du MENU  
PRINCIPAL.  
SOURDINE (MUTE)  
Appuyer → Mise en sourdine du son.  
Appuyer de nouveau → Rétablissement  
du son.  
SÉLECTEUR DE MODE DE  
CÂBLOVISION/DVD-TÉLÉVISION/  
MAGNÉTOSCOPE (CATV/DVD-TV/VCR)  
En position télévision/magnétoscope  
(TV/VCR), permet de mettre le téléviseur et  
le magnétoscope sous/hors tension et de  
sélectionner ses canaux (touche de canaux en  
ordre croissant/décroissant et d’accès direct).  
En position câblovision/DVD (CATV/DVD),  
permet de mettre un convertisseur de téléviseur  
par câble et un lecteur de DVD sous/hors  
tension et de sélectionner ses canaux.  
•
CLOSED CAPTION apparaît lorsque le  
son est mis en sourdine.  
TV • CATV • VCR • DVD  
COMMANDE DU LECTEUR DE DVD/  
MAGNÉTOSCOPE  
Remarque:  
•
Les boutons ombrés de la télécommande illustrés ci-dessus brillent dans l’obscurité lorsque la télécommande a été placée  
sous une ampoule fluorescente ou toute autre source lumineuse.  
•
•
•
•
•
Le matériau phosphorescent n’est absolument pas toxique ou radioactif. Il peut donc être utilisé en toute sécurité.  
Le degré d’illumination variera en fonction de l’intensité de la source d’éclairage.  
Le degré d’illumination diminuera avec le temps, en fonction de la température.  
Le temps requis pour charger les touches phosphorescentes dépendra de l’éclairage environnant.  
Les rayons directs du soleil et les luminaires fluorescents constituent les meilleures sources de chargement des touches  
phosphorescentes.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
EZ SETUP during First Power On  
POWER  
TV  
L
When you turn on the TV for the first time, it will automatically  
memorize the broadcasting channels.  
POWER  
DVD  
VCR  
DISPLAY  
INPUT  
Please perform the following instructions before you press the  
power button.  
(1) Insert the batteries into the remote control. (See page 5)  
(2) Connect the antenna cable to the TV set. (See page 5 ~ 6)  
(3) Plug in the AC POWER cord to the wall outlet.  
1
4
7
2
5
8
0
3
6
9
VOLUME  
(+)/(–)  
FLASHBACK  
ENTER  
100  
PERSONAL PREFERENCE  
A
B
C
D
CHANNEL  
UP (8)/  
DOWN (9)  
CH  
CH  
VOL  
VOL  
—
+
MENU  
MUTE  
MENU  
CATV  
DVD  
TV  
VCR  
1 Press the POWER button on the TV set or on the Remote Control  
to turn on the TV. The SELECT LANGUAGE mode will be  
displayed.  
SE L ECT L ANGUAGE  
ENGL I SH  
ESPAÑOL  
FRANCA I S  
SE L ECT : CH8 / 9  
(Remote Control)  
(On the Set)  
POWER  
SE T  
: VOL + / –  
(SELECT LANGUAGE mode)  
2 Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH  
SE L ECT L ANGUAGE  
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.  
ENGL I SH  
ESPAÑOL  
FRANCA I S  
SE L ECT : CH8 / 9  
CH  
CH  
SE T  
: VOL + / –  
3 Press VOL (+) or (–) to access EZ SETUP mode.  
CONNECT ANT ENNA  
OR CAB L E .  
ST ART E Z SE TUP ?  
VOL  
—
VOL  
+
YES : VOL +  
NO : VOL –  
(EZ SETUP mode)  
4 Press VOL (+).  
The tuner will automatically search for the  
broadcasting and cable TV channels. (The CH No.  
will automatically increase when it appears.)  
P L EASE WA I T  
AUTO PROGRAMM I NG  
If you want to stop the EZ SETUP process once it  
has started, press VOL (–) and it will be canceled.  
VOL  
+
1 8  
S TOP : VOL –  
If you want to SETUP again, please refer to page  
27 on SETUP.  
To cancel EZ SETUP  
Press VOL (–).  
5 Once EZ SETUP is completed, the lowest channel number  
memorized will be displayed.  
2
Note:  
• If EZ SETUP does not memorize all the channels in your region, please refer to page 28 for more  
information on manually memorizing the channels using CHANNEL SETTING.  
• It may be difficult to PRESET when the broadcasting signals are weak, the channel cycle frequency  
is incorrect or the frequency jamming is occuring around the area. Please refer to pages 28 ~ 30 for  
more information on manually memorizing the channels using CHANNEL SETTING.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Demo Mode  
• To quickly learn more about the TV set, press and hold for more than  
three seconds both MENU or CH UP (8) and DOWN (9) on the TV  
set. The TV set will go into DEMO mode and briefly explain the various  
features.  
(On the Set)  
or  
• To cancel DEMO mode, again press both MENU or CH UP (8) and  
DOWN (9) on the TV set.  
MENU  
button  
CHANNEL  
UP (8)/  
DOWN (9)  
buttons  
Example:  
DEMO mode display  
F
r
o
m
SHARP  
M
i
nds  
duc  
Com  
e
SHARP  
Pro  
t
s
Accessing the MAIN MENU screen without Remote Control  
• If you misplaced your Remote Control you can still access most settings  
via the MAIN MENU screen when you press both MENU or CH UP  
(8) and DOWN (9) on the TV set.  
(On the Set)  
or  
• Some features of your TV set will not be accessible without the Remote  
Control. If you lost your Remote Control, contact a Sharp Service  
Center for a replacement.  
MENU  
button  
CHANNEL  
UP (8)/  
DOWN(9)  
buttons  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language  
L
L
The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.  
Setting the ON SCREEN DISPLAY Language.  
S L EEP T I MER  
1 Press MENU to access MAIN MENU screen.  
V I DEO AD J US T  
AUD I O SE L ECT  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
(MAIN MENU screen)  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET UP”.  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O SE L ECT  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
CH  
CH  
B L UE SCREEN  
PERSONA L PRE F .  
UN I VERSA L P L US  
L ANGUAGE  
3 Press VOL (+) or (–) to access SET UP mode, then press CH UP (8)  
or DOWN (9) to move the “ ” mark to “LANGUAGE”.  
CH  
CH SE T T I NG  
VOL  
VOL  
+
→
—
CH  
(SET UP mode)  
4 Press VOL (+) or (–) to access LANGUAGE change mode.  
L ANGUAGE  
ENGL I SH  
ESPAÑOL  
FRANCA I S  
VOL  
VOL  
+
—
(LANGUAGE change mode)  
I D I OMA  
5 Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH  
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.  
ENGL I SH  
ESPAÑOL  
FRANCA I S  
CH  
CH  
6 Press MENU to exit.  
Sleep Timer  
L
You can set the number of minutes for your TV to automatically turn off.  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O SE L ECT  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
1 Press MENU to access MAIN MENU screen.  
2 Press VOL (+) or (–) to access TIMER SET mode.  
VOL  
—
VOL  
+
→
(MAIN MENU screen)  
S L EEP T I MER  
1 2 0 REMA I N  
3 Press VOL (+) or (–) to set a sleep time of 30, 60, 90 or 120 minutes.  
4 Press MENU to exit.  
VOL  
—
VOL  
+
→
Note:  
(TIMER SET mode)  
• To turn off the Sleep Timer, repeat the above SLEEP TIMER steps and select “– – – REMAIN” during  
step 3.  
• While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular  
intervals or when the remote’s Display key is pressed.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Adjust  
Description of Adjustment Items  
PERSONAL PREFERENCE  
VOLUME  
(+)/(–)  
A
B
C
D
Selected  
item  
VOL UP (+) button  
VOL DOWN (–) button  
CH  
CH  
VOL  
—
VOL  
+
PICTURE  
TINT  
To increase contrast  
To decrease contrast  
MENU  
MUTE  
CHANNEL  
UP (8)/  
CATV  
DVD  
TV  
To make skin tones greenish  
To increase color intensity  
To increase brightness  
To increase sharpness  
To make skin tones purplish  
To decrease color intensity  
To decrease brightness  
To decrease sharpness  
DOWN (9)  
VCR  
COLOR  
BRIGHT  
SHARP  
MENU  
FAVORITE  
COLOR  
To choose a RED, BLUE or STANDARD COLOR TONE.  
RESET  
To return all adjustments to factory preset levels.  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O SE L ECT  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “VIDEO  
ADJUST”.  
CH  
→
CH  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access PICTURE adjust mode.  
VOL  
—
VOL  
+
P I CTURE  
5 0  
–
+
(PICTURE adjust mode)  
4 Press CH UP (8) or DOWN (9) to select the desired mode.  
(Refer to the diagram below.)  
TINT  
BRIGHT  
PICTURE  
COLOR  
CH  
CH  
FAVORITE COLOR  
RESET  
SHARP  
: CH UP (8)  
: CH DOWN (9)  
5 Press VOL (+) or (–) to adjust the setting.  
VOL  
—
VOL  
+
P I CTURE  
VOL UP (+)  
5 0  
–
+
increase contrast  
VOL DOWN (–)  
decrease contrast  
6 Repeat steps 4 to 5 to adjust other settings.  
7 Press MENU to exit.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio Select  
L
MTS (MULTICHANNEL TV SOUND)  
This circuit allows reception of stereo or bilingual TV sound.  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O SE L ECT  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “AUDIO  
SELECT”.  
CH  
→
CH  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access AUDIO SELECT mode.  
VOL  
—
VOL  
+
4 Press VOL (+) or (–) to select “STEREO”, “SAP” or “MONO”.  
AUD I O SE L ECT  
MT S  
: SAP  
STEREO  
SAP  
MONO  
VOL  
—
VOL  
+
(AUDIO SELECT mode)  
5 Press MENU to exit.  
Ex:  
Actual screen indicating ONAIR when receiving STEREO broadcasts.  
Actual channel number  
1 2  
“← ON AIR” will appear next to STEREO or  
SAP when receiving STEREO or SAP  
broadcasts.  
S T EREO ON A I R  
SAP  
MONO  
ON A I R  
(Channel call on screen)  
L
You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.  
• Stereo broadcasts  
Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo sound.  
• SAP broadcasts  
Television broadcast can be received with either MAIN or SAP sound.  
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)  
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)  
L
If stereo sound is difficult to hear.  
• You can obtain clearer sound by manually switching to fixed monaural mode.  
Note:  
• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo  
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.  
• Selecting MTS while in the INPUT mode does not change the type of sound; in this case, sound is  
determined by the video source.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Closed Caption  
L
HOW TO SET CLOSED CAPTION  
• Your TV is equipped with an internal Closed Caption decoder. “Closed  
Caption” is a system which allows you to view conversations, narration,  
and sound effects in TV programs and home videos as subscript on  
your TV screen as shown on the right.  
• Not all the programs and videos will offer closed caption. Please look  
for the “  
” symbol to ensure that captions will be shown.  
PERSONAL PREFERENCE  
VOLUME  
• Closed Caption broadcast can be viewed in two modes: CAPTION  
and TEXT. For each mode, two channels are available, CH1 and CH2:  
A
B
C
D
(+)/(–)  
CH  
CH  
VOL  
—
VOL  
+
CHANNEL  
UP (8)/  
DOWN (9)  
The [CAPTION] mode subscripts dialogues and commentaries of TV  
dramas and news programs while allowing clear view of the picture.  
The [TEXT] mode displays over the picture other various information  
(such as TV program schedule, weather forecast, etc.) that is  
independent of the TV programs.  
MENU  
MUTE  
CATV  
DVD  
TV  
VCR  
MENU  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O SE L ECT  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “CLOSED  
CAPTION”.  
CH  
→
CH  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access CLOSED CAPTION setting mode.  
C LOSED CAP T I ON  
MODE  
DA T A  
: CAPT I ON  
: CH  
1
VOL  
—
VOL  
+
(CLOSED CAPTION setting mode)  
C LOSED CAP T I ON  
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to either  
“MODE” or “DATA”.  
MODE  
DA T A  
: CAPT I ON  
: CH  
1
CH  
CH  
5 Press VOL (+) or (–) to change the CLOSED CAPTION setting.  
C LOSED CAP T I ON  
CH 1  
DATA :  
CAPTION  
MODE :  
MODE  
DA T A  
: CAPT I ON  
: CH  
1
CH 2  
TEXT  
OFF  
VOL  
—
VOL  
+
6 Press MENU to exit.  
Note:  
• If a broadcast has CLOSED CAPTION and the MUTE button is pressed, the set enters [CAPTION]  
mode automatically. Pressing MUTE again will return the set to its previous condition.  
• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor  
or if there are problems at the broadcast source. This does not necessarily indicate a problem with  
your set.  
• If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION  
broadcast, the closed captions will disappear momentarily.  
• When viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen  
may become dark and blank. Should this occur, set the Closed Caption mode to “OFF”.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parent Control (V-CHIP Operation)  
L V-CHIP  
• This function allows you to restrict TV programs and also allows you to control TV usage based on  
FCC data. This function is to prevent your children from watching violence or sexual scenes that may  
be harmful.  
• Restriction of TV programs includes two characters that contain information about the program’s MPAA  
rating and the TV Parental Guidelines. MPAAis restricted by age. TV Parental Guidelines are restricted  
by age and contents.  
• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for  
complete control.  
[1] MPAA RATING  
RATING  
G
GENERAL AUDIENCES. All ages admitted.  
PG  
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for  
children.  
age  
PG-13  
PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate  
for children under 13.  
base  
R
RESTRICTED. Under 17 requires accompanying parent or adult guardian.  
NO ONE 17 AND UNDER ADMITTED.  
NC-17  
X
X Rating is an older rating that is unified with NC-17 but may be encoded on  
older movie’s data.Note:  
• MPAA RATING (Example)  
Example 2.  
Example 1.  
“R” in the age based RATING is blocked, this will  
automatically block the high rating “NC-17”, “X” also.  
“PG-13” in the age based RATING is blocked,  
this will automatically block the high ratings “R”,  
“NC-17”, “X” also.  
1. User setting  
2. Block table  
not to  
1. User setting  
2. Block table  
G
–––––  
G
block  
not to  
not to  
G
–––––  
G
block  
PG  
–––––  
PG  
block  
not to  
not to  
block  
PG  
–––––  
PG  
block  
PG-13 –––––  
BLOCK  
PG-13  
R
age  
base  
Select  
block  
Select  
PG-13 BLOCK  
BLOCK  
NC-17 BLOCK  
PG-13  
R
R
age  
base  
block  
auto-  
auto-  
block  
R
NC-17 BLOCK  
block  
NC-17  
X
auto-  
block  
auto-  
NC-17  
X
X
BLOCK  
block  
auto-  
X
BLOCK  
block  
Note:  
• MPAA RATING is only age based ratings.  
[2] TV PARENTAL GUIDELINES  
content base  
S
y
x
AGE  
D
L
V
FV  
RATING  
(Sexually  
(Adult  
(Sexual (Violence) (Fantasy  
Suggestive Language) Situation)  
Dialog)  
Violence)  
V
V
V
–
–
–
–
–
–
–
–
–
–
–
–
–
V
–
TV-Y (All children)  
TV-Y7 (Direct to Older Children)  
TV-G (General Audience)  
E
age  
TV-PG (Parental Guidance  
Suggested)  
V
V
V
V
V
–
base  
TV-14 (Parents Strongly  
Cautioned)  
V
V
V
V
V
V
V
V
V
–
–
D
–
TV-MA (Mature Audience Only)  
V : Content Rating can be set.  
–
: Content Rating can not be set (not normally broadcast by TV station).  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parent Control (V-CHIP Operation Continued)  
• TV-PARENTAL GUIDELINES (Example)  
AG  
E
D
L
S
V
FV  
TV–Y  
–
–
–
–
–
–
–
–
–
–
–
–
–
: V I E  
W
Example 1.1 : Age Based setting  
Go through all select ratings and select unblocked for “AGE”.  
This will automatically unblock everything.  
TV–Y7  
V: BLOCK  
TV–G  
–
–
–
–
TV–PG  
TV–14  
TV–MA  
–
MENU : RETURN  
Example 1.2 : Age Based setting  
AG  
E
D
L
S
V
FV  
For “TV-G” select “BLOCK” for “AGE”. This will automatically block the  
higher age ratings “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.  
Furthermore, the content ratings “D”, “L”, “S”, “V”, “FV” are automatically  
blocked as well for “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.  
TV–Y  
–
–
–
–
–
–
–
–
–
–
–
–
–
: V I E  
W
TV–Y7  
V: BLOCK  
TV–G  
V
V
V
V
–
–
–
–
TV–PG  
V V V V  
V V V V  
–
TV–14  
TV–MA  
V V V  
MENU : RETURN  
Example 2.1 : Content Based setting  
AG  
E
D
L
S
V
FV  
For “TV-PG”, “TV-14” and “TV-MA” select unblocked for each content  
ratings (“D”, “L”, “S”, “V”, “FV”) by leaving “AGE” unblocked for “TV-  
PG”, “TV-14” and “TV-MA”. If you choose to unblock for each one in  
content base.  
TV–Y  
–
–
–
–
–
–
–
–
–
–
–
–
–
: V I E  
W
TV–Y7  
V: BLOCK  
TV–G  
–
–
–
–
TV–PG  
TV–14  
TV–MA  
–
MENU : RETURN  
Example 2.2 : Content Based setting  
AG  
E
D
L
S
V
FV  
Then for “TV-PG” and select “BLOCK” for only “V” (Violence). This will  
automatically block the higher ratings “TV-14-V” and “TV-MA-V” (“TV-  
14” and “TV-MA” for Violence content only).  
Please note that with these settings blocking does NOT occur. If a  
TV–Y  
–
–
–
–
–
–
–
–
–
–
–
–
: V I E  
W
TV–Y7  
V: BLOCK  
TV–G  
–
–
–
–
–
TV–PG  
V
V
V
TV–14  
TV–MA  
–
MENU : RETURN  
program is rated only “TV-MA”; it must be rated “TV-MA-V” to be blocked.  
Example 3 : Reset an Age Based setting  
AG  
E
D
L
S
V
FV  
For “TV-14” and select again “BLOCK” for “AGE”.  
This will again automatically block the content ratings “D”, “L”, “S”, “V”,  
“FV” for “TV-MA” as well as “TV-14”.  
Please note that the lower age rating “TV-PG” did not change from its  
TV–Y  
–
–
–
–
–
–
–
–
–
–
–
–
–
: V I E  
W
TV–Y7  
V: BLOCK  
TV–G  
–
–
–
–
TV–PG  
TV–14  
V
V
V V V V  
–
TV–MA  
V V V  
MENU : RETURN  
previous settings.  
Note:  
• Content ratings can be modified but only in the combinations indicated by an V in the table on page  
16.  
• Changing a lower age rating’s content setting to “BLOCK” automatically changes the same higher age  
rating’s content setting to “BLOCK” regardless of their previous settings.  
• Changing a lower rating’s “AGE” setting to “BLOCK” automatically changes all higher ratings to “BLOCK”  
regardless of their previous settings.  
• Any rating’s “AGE” set to unblocked must have its content settings individually set.  
[3] ADDITIONAL MODE  
Besides the above “MPAA RATINGS” and “TV PARENTAL GUIDELINES” new ratings system’s data  
can be downloaded when they become available. (See page 20.)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parent Control (V-CHIP Operation Continued)  
1
2
5
8
0
3
6
L HOW TO SET V-CHIP  
REMOTE  
KEYPAD  
4
7
9
VOLUME  
(+)/(–)  
FLASHBACK  
ENTER  
100  
PERSONAL PREFERENCE  
A
B
C
D
CHANNEL  
UP (8)/  
DOWN (9)  
CH  
CH  
VOL  
VOL  
—
+
MENU  
MUTE  
MENU  
[1] MPAA RATING  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O SE L ECT  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
(MAIN MENU screen)  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “PARENT  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O SE L ECT  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
CONTROL”.  
CH  
CH  
3 Press VOL (+) or (–) to access PARENT CONTROL mode, then  
PARENT CONTROL  
“PARENT CONTROL V-CHIP BLOCK” is displayed.  
V – C  
H
I P B LOCK  
T I MER  
V I E  
W
VOL  
—
VOL  
+
(PARENT CONTROL mode)  
4 Press VOL (+) or (–) to access V-CHIP select mode, then press  
MPAA  
T V GU I DE L I NES  
VOL (+) or (–) to select “MPAA RATING”.  
DO  
S T A TUS  
W
N LOAD : OF F  
: OF F  
VOL  
—
VOL  
+
VOL  
—
VOL  
+
→
(V-CHIP select mode)  
5 Press CH UP (8) or DOWN (9) to move the “ ” mark to "PG",  
then press VOL (+) or (–) to select BLOCK. If you set “PG” to  
BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically blocked.  
G
: –––––  
: BLOCK  
: BLOCK  
: BLOCK  
: BLOCK  
: BLOCK  
PG  
PG–13  
R
NC–17  
X
CH  
MENU : RETURN  
VOL  
—
VOL  
+
→
CH  
6 Repeat pressing MENU to return V-CHIP select mode exit.  
Note:  
Ex.  
• If you set “G” to BLOCK , all RATING are automatically blocked.  
• If you set “X” to BLOCK, “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parent Control (V-CHIP Operation Continued)  
[2] TV GUIDELINES  
1 Repeat steps 1 to 3 of [1] MPAA RATING.  
MPAA  
T V GU I DE L I NES  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “TV  
GUIDELINES”.  
CH  
DO  
W
N LOAD : OF F  
: OF F  
S T A TUS  
CH  
A
G
E
D
L
S
V
FV  
3 Press VOL (+) or (–) to access TV GUIDELINES mode.  
TV–Y  
TV–Y7  
TV–G  
TV–PG  
TV–14  
TV–MA  
–
–
–
–
–
–
–
–
–
–
–
–
–
V
–
: V I E  
W
V: BLOCK  
V
V
V
V
V
VOL  
—
VOL  
+
–
V V V V  
V
–
V V V  
V V V  
–
–
MENU : RETURN  
4 To change CONTENT SETTING, press CH UP (8) or DOWN  
(9) to move the “ ” to the desired rating and then press VOL  
(TV GUIDELINES mode)  
(+) or (–) to select.  
CH  
VOL  
—
VOL  
+
→
CH  
5 Press CH UP (8) or DOWN (9) to move the “ ” to the desired  
TV–Y7  
AGE  
D
:
:
:
:
:
:
BLOCK  
–––––  
–––––  
–––––  
–––––  
BLOCK  
content and then press VOL (+) or (–) to select either “BLOCK” or  
L
unblock (“– – – –”).  
S
V
FV  
CH  
VOL  
—
VOL  
+
→
MENU : RETURN  
CH  
(CONTENT RATING mode)  
6 Press MENU to return to TV GUIDELINES mode.  
A
G
E
D
L
S
V
FV  
TV–Y  
TV–Y7  
TV–G  
TV–PG  
TV–14  
TV–MA  
–
–
–
–
–
–
–
–
–
–
–
–
–
: V I E  
W
V: BLOCK  
V
V
V
V
–
–
–
–
V V V V  
V
–
V V V  
V V V  
MENU : RETURN  
7 Repeat steps 4 to 5 until all ratings and their contents are set.  
8 When done, press MENU to exit.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parent Control (V-CHIP Operation Continued)  
[3] ADDITIONAL MODE (DOWNLOAD)  
There will be an additional new rating system. In that case, please set up as follows.  
Subsequently the new rating system will set up automatically.  
1 Repeat steps 1 to 3 of [1] MPAA RATING.  
MPAA  
T V GU I DE L I NES  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to  
“DOWNLOAD”.  
CH  
DOWN LOAD : OF F  
S T A TUS  
MPAA  
:
OF F  
CH  
3 Press VOL (+) or (–) to “DOWNLOAD : ON”.  
T V GU I DE L I NES  
DO  
S T A TUS  
W
N LOAD : ON  
: OF F  
VOL  
—
VOL  
+
4 Repeat pressing MENU to return exit.  
DOWNLOAD V-CHIP DATA  
•
1
4
2
5
8
0
3
6
REMOTE  
KEYPAD  
7
9
VOLUME  
(+)/(–)  
FLASHBACK  
ENTER  
100  
PERSONAL PREFERENCE  
A
B
C
D
CHANNEL  
UP (8)/  
DOWN (9)  
CH  
CH  
VOL  
VOL  
—
+
MENU  
MUTE  
MENU  
1 If you watch the program with “New Rating System Data”,  
P L EASE WA I T  
DOWNLOAD screen will be displayed.  
NO  
W
DO  
WN LOAD I NG  
V – CH I P DA T A  
(DOWNLOAD screen)  
2 DOWNLOAD screen will disappear, if DOWNLOAD is finished.  
Note:  
• DOWNLOAD would not be started, if you don’t watch the program with “New Rating System  
Data”.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parent Control (V-CHIP Operation Continued)  
ADDITIONAL MODE (Example)  
•
1 Repeat steps 1 to 2 of [3] ADDITIONAL MODE.  
MPAA  
TV GU I DEL I NES  
Cdn . Eng l i sh Ra t i ngs  
Cdn . F r enc h Ra t i ngs  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “Cdn.  
English Ratings”, then press VOL (+) or (–).  
CH  
DO  
W
NLOAD : ON  
VOL  
—
VOL  
+
STATUS  
: ON  
→
CH  
(After download the rating data)  
3 You can select “BLOCK” or “– – – – –” (unblock) from each RATING  
C
C8+  
G
PG  
14+  
18+  
: –––––  
: BLOCK  
: –––––  
: BLOCK  
: –––––  
: BLOCK  
mode by pressing CH UP (8) or DOWN (9) and VOL (+) or (–).  
CH  
VOL  
—
VOL  
+
→
I ND I V I DUAL BLOCK  
MENU : RETURN  
CH  
(ENGLISH INDIVIDUAL BLOCK mode)  
4 You can select “BLOCK” or “– – – – –” (unblock) from each RATING  
mode by pressing CH UP (8) or DOWN (9) and VOL (+) or (–) if  
you select “Cdn. French Ratings” in step 2.  
CH  
G
: –––––  
: BLOCK  
: –––––  
: BLOCK  
: –––––  
8+  
13+  
16+  
18+  
VOL  
VOL  
+
I ND I V I DUAL BLOCK  
MENU : RETURN  
→
—
CH  
(FRENCH INDIVIDUAL BLOCK mode)  
Note:  
• In additional mode  
Including two types (English mode, French mode), altogether you are able to download 4 kinds  
of mode.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parent Control (V-CHIP Operation Continued)  
L ACTIVATE ON TO TURN ON V-CHIP BLOCK  
1 Repeat steps 1 to 3 of [1] MPAA RATING.  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to  
MPAA  
T V GU I DE L I NES  
“STATUS”, then press VOL (+) or (–) to activate ON the V-CHIP  
BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.)  
CH  
DO  
S T A TUS  
W
N LOAD : OF F  
: ON  
VOL  
—
VOL  
+
→
CH  
3 Press MENU, then “INPUT SECRET No.” will be displayed.  
I NPUT SECRE T N o .  
–
–
–
–
4 Enter the 4-digit SECRET No. using the REMOTE KEYPAD.  
I NPUT SECRE T N o .  
1
2
3
4
5 Press MENU and SECRET No. is registered.  
L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.  
1 “V-CHIP HAS BEEN ACTIVATED” will be displayed if you watch  
2 3  
the program with Program Rating data as same as you configured.  
V –CH I P HAS BEEN  
ACT I VA T ED  
T V – Y 7  
F V  
Note:  
• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.  
2 Press MENU, then “INPUT SECRET No.” will be displayed.  
I NPUT SECRE T N o .  
–
–
–
–
3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD, then  
V-CHIP BLOCK temporarily will be canceled. If the wrong SECRET  
No. is chosen, “SECRET No. IS INCORRECT” will be displayed.  
Input the SECRET No. again in this case.  
I NPUT SECRE T N o .  
∗
∗
∗
∗
Note:  
• If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parent Control (V-CHIP Operation Continued)  
L To change the V-CHIP BLOCK setting. (Secret No. is registered.)  
1 Repeat steps 1 to 3 of [1] MPAA RATING, then “INPUT SECRET  
No.” will be displayed.  
I NPUT SECRE T N o .  
–
–
–
–
2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD  
and the V-CHIP select mode will be displayed. Repeat  
configuration of the V-CHIP BLOCK.  
I NPUT SECRE T N o .  
∗
∗
∗
∗
L If you intend to change or forget your Secret No., clear the original Secret No. and set  
up a new one.  
1 Repeat steps 1 to 3 of [1] MPAA RATING, or 1 to 2 of [L To  
cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has  
been activated], then “INPUT SECRET No.” will be displayed.  
(On the Set)  
2 Press and hold both VOL (+) and CH DOWN (9) on the TV  
set simultaneously until the message “INPUT SECRET No.”  
disappears.  
VOL (+)/CHANNEL  
DOWN (9) buttons  
3 Press MENU two times to exit.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parent Control (VIEW TIMER)  
L
VIEW TIMER  
This function allows you to restrict TV viewing time and also allows you to control TV usage.  
This function is to prevent your children from watching too much TV.  
VIEWING TIME (an accumulative timer: counts only the time  
duration acquired while the TV is on.)  
• VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10  
hours) in 30 minutes intervals.  
V I EW T I MER  
OFF TIME (Restricts TV watching after the VIEWING TIME reaches  
V I EW I NG T I ME  
– – H – –M  
OF F T I ME  
– – H – –M  
S T A TUS : OF F  
zero.)  
• OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours)  
in 30 minutes intervals.  
STATUS (ON/OFF setting of VIEW TIMER)  
L
How to set VIEW TIMER.  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O SE L ECT  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
1 Press MENU to access MAIN MENU screen.  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “PARENT  
CONTROL”.  
CH  
→
CH  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access PARENT CONTROL mode.  
PAR ENT CONTROL  
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to “VIEW  
V – C  
H
I P B LOCK  
T I MER  
TIMER”.  
V I E  
W
CH  
VOL  
—
VOL  
+
→
CH  
(PARENT CONTROL mode)  
5 Press VOL (+) or (–) to access “VIEW TIMER”.  
V I E  
V I E  
W
W
T I MER  
I NG T I ME  
– – H – –M  
OF F T I ME  
– – H – –M  
S T A TUS : OF F  
VOL  
—
VOL  
+
6 Press CH UP (8) or DOWN (9) to select “VIEWING TIME” and  
V I EW T I MER  
“OFF TIME”. For each selection, press the VOL (+) or (–) to set  
the time duration.  
V I EW I NG T I ME  
2 H 0 0M  
OF F T I ME  
– – H – –M  
CH  
VOL  
—
VOL  
+
→
CH  
S T A TUS : OF F  
7 Press CH UP (8) or DOWN (9) to select “STATUS”. Press the  
V I EW T I MER  
VOL (+) or (–) to turn ON the “VIEWING TIMER”. (If STATUS is  
V I EW I NG T I ME  
2 H 0 0M  
OF F T I ME  
5 H 0 0M  
OFF, VIEW TIMER is not operated)  
CH  
VOL  
—
VOL  
+
→
CH  
S T A TUS : ON  
8 Press MENU. “INPUT SECRET No.” will be displayed.  
I NPUT SECRE T N o .  
–
–
–
–
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parent Control (VIEW TIMER Continued)  
9 Enter the 4-digit SECRET No. using the REMOTE KEYPAD.  
I NPUT SECRET N o .  
10 Press MENU, and SECRET No. is registered.  
1
4
7
2
5
8
0
3
1
2
3
4
6
9
ENTER  
→
100  
Example  
V I EW T I MER  
• To restrict anybody from watching the TV for 5 hours, after watching the  
TV for 2 hours, your settings would look like this:  
• They can choose to watch the 2 hours of TV however they wish. For  
example, they could watch 1 hour of TV, turn TV off for 30 minutes, then  
turn TV on and watch the remaining 1 hour on the VIEWING TIMER.  
V I EW I NG T I ME  
2 H 0 0M  
OF F T I ME  
5 H 0 0M  
S T A TUS : ON  
L
To change the VIEW TIMER settings. (SECRET No. is registered)  
I NPUT SECRET N o .  
1 Repeat “How to set VIEW TIMER” steps and select  
“PARENT CONTROL VIEW TIMER” during step 3.  
Press VOL (+) or (–), and “INPUT SECRET No.” will  
be displayed.  
–
–
–
–
VOL  
—
VOL  
+
2 Enter the 4-digit SECRET No. using the REMOTE  
KEYPAD, and the VIEW TIMER access screen will  
be displayed. Repeat step 5 ~ 6.  
1
4
7
2
5
8
0
3
6
9
I NPUT SECRET N o .  
* * * *  
ENTER  
100  
Note:  
SECRET N o . I S  
• When you choose the correct SECRET No., the VIEW TIMER access  
screen is displayed. If the wrong SECRET No. is chosen, “SECRET No.  
IS INCORRECT” is displayed. Input the SECRET No. again in this case.  
I NC  
RRECT  
O
L
To cancel the VIEW TIMER (While the TV set is OFF but the VIEW  
TIMER is set)  
T I ME OVER  
1 Turn on TV; a blue screen message “TIME OVER” will appear. If you  
I NPUT SECRET N o .  
do nothing, the TV will turn off in approximately 30 seconds.  
–
–
–
–
2 Enter the 4-digit SECRET No. using the REMOTE  
1
4
7
2
5
8
0
3
6
KEYPAD. When you choose the correct SECRET No.,  
the VIEW TIMER is canceled. If the wrong SECRET  
No. is chosen, “SECRET No. IS INCORRECT” is  
displayed. Input the SECRET No. again in this case.  
T I ME OVER  
9
I NPUT SECRET N o .  
ENTER  
100  
* * * *  
L
To cancel the VIEW TIMER setting or change the SECRET No. (When  
you forget the SECRET No.)  
1 Repeat “How to set VIEW TIMER” steps and select  
“PARENT CONTROL VIEW TIMER” during step 3.  
Press VOL (+) or (–), and “INPUT SECRET No.” will  
be displayed.  
VOL  
—
VOL  
+
I NPUT SECRET N o .  
–
–
–
–
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parent Control (VIEW TIMER Continued)  
(On the Set)  
2 Press and hold both VOL (+) and CH DOWN (9) on the TV set  
simultaneously until the VIEW TIMER access screen is displayed.  
Now you can cancel the VIEW TIMER settings or can change the  
SECRET No. while “INPUT SECRET No.” is displayed.  
VOL (+)/CHANNEL  
DOWN (9) buttons  
L
Notice of Remaining VIEWING TIME  
VIEWING TIME  
• For every 30 minute interval, the “remaining time” will be displayed  
for 4 seconds. For the last 5 minutes, the “remaining time” will be  
displayed every minute.  
0H 30M REMAIN  
VIEWING TIME  
0H 05M REMAIN  
• “0 REMAIN” will be displayed for 10 seconds just before the VIEWING  
TIME is completed.  
VIEWING TIME  
0
REMAIN  
Energy Save  
PERSONAL PREFERENCE  
L
This feature lets you lower the power consumption of your TV  
set which in turn saves you money and minimizes the impact on  
the environment. When this feature is turned on, it reduces the  
brightness of the TV to a level that consumes approximately 20  
percent less energy than when the feature is turned off.  
The reduction in brightness will be less noticeable under low  
room lighting conditions.  
VOLUME  
A
B
C
D
(+)/(–)  
CH  
CH  
VOL  
—
VOL  
+
CHANNEL  
UP (8)/  
DOWN (9)  
MENU  
MUTE  
CATV  
DVD  
TV  
VCR  
MENU  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O SE L ECT  
C LOSED CAP T I ON  
PAR ENT CONTROL  
ENERGY SAV E  
SE T UP  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to  
“ENERGY SAVE”.  
CH  
→
CH  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access ENERGY SAVE select mode.  
ENERGY SAVE  
: OF F  
VOL  
—
VOL  
+
(ENERGY SAVE select mode)  
4 Press VOL (+) or (–) to select “ON”.  
ENERGY SAVE  
: ON  
VOL  
—
VOL  
+
5 Press MENU to exit.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Up  
L
EZ SETUP  
By operating the channel presetting functions, you can preset  
your TV to the desired channels for viewing.  
1
4
2
5
8
0
3
6
REMOTE  
KEYPAD  
7
9
VOLUME  
(+)/(–)  
FLASHBACK  
ENTER  
100  
PERSONAL PREFERENCE  
A
B
C
D
CHANNEL  
UP (8)/  
DOWN (9)  
CH  
CH  
VOL  
VOL  
—
+
MENU  
MUTE  
MENU  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O SE L ECT  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET  
UP”.  
CH  
→
CH  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access SET UP mode, then press CH UP  
B L UE SCREEN  
PERSONA L PRE F .  
UN I VERSA L P L US  
L ANGUAGE  
(8) or DOWN (9) to move the “ ” mark to “CH SETTING”.  
CH  
CH SE T T I NG  
VOL  
—
VOL  
+
→
CH  
(SET UP mode)  
4 Press VOL (+) or (–) to access CH SETTING mode.  
E Z SE TUP  
A I R / CAB L E  
CH SEARCH  
CH MEMORY  
VOL  
—
VOL  
+
(CH SETTING mode)  
5 Press VOL (+) or (–) to access EZ SETUP mode.  
CONNECT ANT ENNA  
OR CAB L E .  
ST ART E Z SE TUP ?  
VOL  
—
VOL  
+
YES : VOL +  
NO : VOL –  
(EZ SETUP mode)  
6 Press VOL (+).  
VOL  
+
P L EASE WA I T  
The tuner will automatically search for the  
broadcasting and cable TV channels. (The CH No.  
will automatically increase when it appears.)  
AUTO PROGRAMM I NG  
If you want to stop the EZ SETUP process once it  
has started, press VOL (–). Search will be  
canceled.  
1 8  
S TOP : VOL –  
To cancel EZ SETUP  
Press VOL (–).  
7 Once EZ SETUP is completed, the lowest channel number  
memorized will be displayed.  
2
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Up (Continued)  
L
CHANNEL SETTING  
If EZ SETUP does not memorize all the channels in your region, follow the instructions below  
to manually memorize the channel.  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O SE L ECT  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET  
UP”.  
CH  
→
CH  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access SET UP mode.  
B L UE SCREEN  
PERSONA L PRE F .  
UN I VERSA L P L US  
L ANGUAGE  
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to “CH  
SETTING”.  
CH  
CH SE T T I NG  
VOL  
—
VOL  
+
→
CH  
(SET UP mode)  
5 Press VOL (+) or (–) to access CH SETTING mode.  
E Z SE TUP  
A I R / CAB L E  
CH SEARCH  
CH MEMORY  
VOL  
—
VOL  
+
(CH SETTING mode)  
6 Press CH UP (8) or DOWN (9) to move the “ ” mark to “AIR/  
E Z SE TUP  
A I R / CAB L E  
CH SEARCH  
CH MEMORY  
CABLE”, then press VOL (+) or (–) to access AIR/CABLE mode.  
CH  
VOL  
—
VOL  
+
→
CH  
7 Press CH UP (8) or DOWN (9) to move the “ ” mark to the  
A I R / CAB L E  
desired mode.  
A I R  
CAB L E S TD  
CAB L E HRC  
CAB L E I RC  
CH  
CABLE STD  
CABLE HRC  
CABLE IRC  
AIR  
CH  
(AIR/CABLE mode)  
8 Press MENU to exit.  
Note:  
• Receivable channels of your TV set are:  
AIR channels:  
CABLE channels:  
VHF: 2 through 13.  
1 (HRC and IRC mode only)  
UHF: 14 through 69.  
2 through 125 (STD, HRC and IRC)  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Up (Continued)  
L
Saving broadcast TV channels into memory.  
CH  
CH  
1.1 Press MENU to access MAIN MENU  
screen, then press CH UP (8) or DOWN  
(9) to move the “ ” mark to “SET UP”.  
E Z SE TUP  
A I R / CAB L E  
CH SEARCH  
CH MEMORY  
→
1.2 Press VOL (+) or (–) to access SET UP  
mode, then press CH UP (8) or DOWN  
(9) to move the “ ” mark to “CH  
SETTING”.  
CH  
CH  
VOL  
VOL  
—
+
→
(CH SETTING mode)  
VOL  
—
VOL  
+
1.3 Press VOL (+) or (–) to access CH  
SETTING screen.  
1.4 Press CH UP (8) or DOWN (9) to move  
the “ ” mark to “CH SEARCH”, then press  
VOL (+) or (–) to access CH SEARCH  
screen.  
CH  
CH  
VOL  
—
VOL  
+
→
START  
(START)  
CH SEARCH  
2.1 Press VOL (+). The tuner will search  
through all available channels in your area  
and add them into the TV’s memory.  
VOL  
+
A I R  
1 2  
S T ART : +  
S TOP : –  
(STOP)  
STOP  
VOL  
—
2.2 Press VOL (–). CH SEARCH will stop at  
the current channel and will not add any  
higher channels.  
(CH SEARCH mode)  
2.3 Press MENU to exit.  
Note:  
• If you press VOL (+) again while in the CH SEARCH mode, auto-  
program will start again, and the previously memorized channels will  
be lost.  
L
Adding weak or additional channels or erasing unwanted channels from TV memory.  
1.1 Press MENU to access MAIN MENU  
screen, then press CH UP (8) or DOWN  
(9) to move the “ ” mark to “SET UP”.  
CH  
CH  
E Z SE TUP  
A I R / CAB L E  
CH SEARCH  
CH MEMORY  
→
1.2 Press VOL (+) or (–) to access SET UP  
mode, then press CH UP (8) or DOWN  
(9) to move the “ ” mark to “CH  
SETTING”.  
CH  
CH  
VOL  
—
VOL  
+
→
(CH SETTING mode)  
1.3 Press VOL (+) or (–) to access CH  
SETTING mode, then press CH UP (8) or  
DOWN (9) to move the “ ” mark to “CH  
MEMORY”.  
CH  
CH  
VOL  
—
VOL  
+
→
2.1 Press VOL (+) or (–) to access CH  
VOL  
—
VOL  
+
MEMORY.  
2.2 Use CH UP (8) or DOWN (9) or REMOTE  
KEYPAD to select each desired channel  
to add or erase.  
CH  
or  
CH  
2.3 Press VOL (+) to add a channel to the TV’s  
memory or press VOL (–) to erase a  
channel from the TV’s memory.  
VOL  
—
VOL  
+
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Up (Continued)  
2.4 Press MENU to exit.  
VOL (+)  
PERSONAL PREFERENCE  
VOLUME  
A
B
C
D
(+)/(–)  
CH  
CH  
VOL  
—
VOL  
+
To add channel 12 to  
MENU  
MUTE  
CHANNEL  
UP (8)/  
DOWN (9)  
CH MEMORY  
CH MEMORY  
the TV memory  
CATV  
DVD  
TV  
A I R 1 2  
1 2  
A I R  
VCR  
MENU  
TO ADD  
: +  
VOL (–)  
To erase channel 12 from  
the TV memory  
TO ERASE : –  
(CH MEMORY  
unmemorized channel)  
(CH MEMORY  
memorized channel)  
L
BLUE SCREEN  
Automatically turns the screen blue if a broadcast signal is not  
received.  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O SE L ECT  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET  
UP”.  
CH  
→
CH  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access SET UP mode.  
B L UE SCREEN  
PERSONA L PRE F .  
UN I VERSA L P L US  
L ANGUAGE  
CH SE T T I NG  
VOL  
—
VOL  
+
(SET UP mode)  
4 Press VOL (+) or (–) to access BLUE SCREEN select mode.  
B LUE SCREEN  
: OF F  
VOL  
—
VOL  
+
(BLUE SCREEN select mode)  
5 Press VOL (+) or (–) to select “ON”.  
B LUE SCREEN  
: ON  
VOL  
—
VOL  
+
6 Press MENU to exit.  
Note:  
• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function  
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch  
the BLUE SCREEN “OFF”.  
• While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if the  
BLUE SCREEN is turned on.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Up (Continued)  
1
4
2
5
8
0
3
6
L
PERSONAL PREFERENCE  
By setting the PERSONAL PREFERENCE channels in advance,  
you can select your favorite channels easily.  
REMOTE  
KEYPAD  
7
9
FLASHBACK  
ENTER  
VOLUME  
(+)/(–)  
100  
PERSONAL PREFERENCE  
PERSONAL  
PREFERENCE  
A
B
C
D
CHANNEL  
UP (8)/  
DOWN (9)  
CH  
CH  
VOL  
VOL  
—
+
MENU  
MUTE  
MENU  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O SE L ECT  
C LOSED CAP T I ON  
PAR ENT CONTROL  
ENERGY SAV E  
SE T UP  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET  
UP”.  
CH  
→
CH  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access SET UP mode, then press CH UP  
B L UE SCREEN  
PERSONA L PRE F .  
UN I VERSA L P L US  
L ANGUAGE  
(8) or DOWN (9) to move the “ ” mark to “PERSONAL  
PREFERENCE”.  
CH  
CH SE T T I NG  
VOL  
—
VOL  
+
→
CH  
(SETUP mode)  
4 Press VOL (+) or (–) to select PERSONAL PREFERENCE select  
mode in which you can program 4 favorite channels, in 4 different  
categories. (total of 16 channels)  
PERSONA L PREF .  
A
B
C
D
– – – – – – – – – – – –  
– – – – – – – – – – – –  
– – – – – – – – – – – –  
– – – – – – – – – – – –  
VOL  
VOL  
+
—
(PERSONAL PREFERENCE select mode)  
5 Press CH UP (8) or DOWN (9) to move the “ ” mark to the  
PERSONA L PREF .  
desired position.  
A
B
C
D
– – – – – – – – – – – –  
– – – – – – – – – – – –  
– – – – – – – – – – – –  
– – – – – – – – – – – –  
6 Press REMOTE KEYPAD on the Remote to input the CHANNEL  
PERSONA L PREF .  
Number into the memory.  
1
4
7
2
5
8
0
3
A
B
C
D
Example:  
6
1 2 5 – – – – – – – – –  
– – – – – – – – – – – –  
– – – – – – – – – – – –  
– – – – – – – – – – – –  
9
125 — Press “100” followed by “2” and then “5”.  
ENTER  
100  
7 Repeat steps 4 to 6 to input the next CHANNEL Number.  
8 Press MENU to exit.  
To select the PERSONAL PREFERENCE channel.  
If the channels are memorized as shown to the right,  
PERSONA L PREF .  
press the Remote’s “A” button to select the Channels below.  
A
1 2 5  
B
8 5  
C
D
3 8 – – –  
125 25 40  
4
2 5 1 2 3  
3 0 – – –  
4 0  
4
5 5 – – – – – –  
– – – – – – – – –  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Set Up (Continued)  
PERSONAL PREFERENCE  
VOLUME  
L
UNIVERSAL PLUS FUNCTION  
VCR or DVD input mode will be selected automatically by pressing  
VCR or DVD PLAY button on UNIVERSAL REMOTE CONTROL.  
A
B
C
D
(+)/(–)  
CH  
CH  
VOL  
—
VOL  
+
CHANNEL  
UP (8)/  
DOWN (9)  
MENU  
MUTE  
CATV  
DVD  
TV  
VCR  
MENU  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET  
V I DEO AD J US T  
AUD I O SE L ECT  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
UP”.  
CH  
→
CH  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access SET UP mode.  
B L UE SCREEN  
PERSONA L PRE F .  
UN I VERSA L P L US  
L ANGUAGE  
CH SE T T I NG  
VOL  
—
VOL  
+
(SET UP mode)  
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to  
B L UE SCREEN  
PERSONA L PRE F .  
UN I VERSA L P L US  
L ANGUAGE  
“UNIVERSAL PLUS”.  
CH  
CH  
CH SE T T I NG  
5 Press VOL (+) or (–) to access UNIVERSAL PLUS to select VCR  
UN I VERSA L P LUS  
or DVD mode.  
VCR :  
DVD :  
:
:
OF F  
OF F  
VOL  
—
VOL  
+
(UNIVERSALPLUSselectmode)  
6 Press CH UP (8) or DOWN (9) to select the VCR or DVD, and  
press VOL (+) or (–) to select “CH3, CH4”, “INPUT 1”, “INPUT 2”  
or “OFF”.  
CH3  
CH4  
INPUT1  
INPUT2  
OFF  
UN I VERSA L P LUS  
VCR :  
DVD :  
:
:
C H3  
OF F  
Set model to the input in which your  
VCR or DVD is connected to. If done  
through RF, select either channel 3 or  
4 to match the setting of the VCR or  
DVD.  
CH  
CH  
VOL  
—
VOL  
+
→
7 Press MENU to exit.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Video and Audio Input Jacks  
L
Connecting video equipment for playback of video material.  
• When the television is connected to video equipment as shown below, the material being played  
back on the video equipment can be seen on the television screen.  
Connecting video device equipped with video output terminal.  
CONNECTIONS  
VIDEO EQUIPMENT  
(Front connection  
terminals of TV)  
To VIDEO  
OUTPUT  
CAMCORDER  
To AUDIO OUTPUT (L)  
To AUDIO OUTPUT (R)  
(Rear connection  
terminals of TV)  
TV GAME  
To VIDEO OUTPUT  
To AUDIO OUTPUT (L)  
To AUDIO OUTPUT (R)  
VCR  
REV FWD  
DVD  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Video and Audio Input Jacks (Continued)  
L
To watch video material playback.  
• Press the Remote’s INPUT to select VIDEO INPUT mode to which the video equipment you want to  
playback is connected.  
• The external VIDEO INPUT mode will change as follows each time the INPUT is pressed.  
AIR  
or  
CABLE  
INPUT 1  
(IN-1)  
Rear  
INPUT 2  
(IN-2)  
Front  
• INPUT mode can be selected by pressing either the CH UP (8) on the TV remote control when the  
TV is set to the highest channel stored in memory, or by pressing the CH DOWN (9) when it is set to  
the lowest channel.  
Note:  
• When connecting video or audio equipment to the television, be sure that the power is turned off in  
order to prevent damage to either the television or the equipment being connected.  
• It is the intent of SHARP that this product be used in full compliance with the copyright law of the  
United States and that prior permission be obtained from copyright owners whenever necessary.  
• For detailed information on the connection and use of auxiliary equipment, refer to the instruction  
manuals of the equipment being used.  
• The connection cords can be obtained from your local video store.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation of Remote Control  
L
“Identifying” Remote VCRs, cable TV  
L
Universal Remote Control  
conveters and DVDs  
With the purchase of your television set you  
also have received the latest innovation in  
remote control technology. With its easy-to-  
use push button keyboard, your Remote can  
control your television set and most infrared  
remote controlled VCRs, cable TV converters  
and DVDs as well.  
Your Remote Control has been set at the  
factory to operate your TV and many remote  
control VCRs, cable TV converters and DVDs.  
However, in some cases an easy one-time set-  
up step may be necessary before the Remote  
will operate accessory VCRs, cable TV  
converters and DVDs.  
Note:  
• In this set-up step, the Remote locates and  
memorizes the remote control transmitter code  
for the VCR, cable TV converters and DVDs.  
• Once “identified”, the Remote sends the proper  
remote signals to operate your accessory.  
• This identify step will not have to be repeated  
until power to the Remote is interrupted due  
to a battery failure.  
• Depending on the model year produced, brand  
and type of VCR cable TV converter and DVD,  
some models may not be compatible with the  
remote control.  
• Some brands of Cable TV converter Box may  
not enable channel selection until the ENTER  
is pressed.  
Example:  
L
USING YOUR REMOTE CONTROL WITH A  
VCR AND DVD  
When you select channel 24,  
(1) Press REMOTE KEYPAD “2”.  
(2) Press REMOTE KEYPAD “4”.  
(3) Press ENTER.  
Once you make certain the Remote Control  
has “identified” your remote controlled VCR  
or DVD, the Remote Control is ready to  
operate your unit. The various VCR or DVD  
function buttons on the Remote Control will  
not operate your VCR or DVD if those features  
are not already found on your unit.  
• For detailed information on the use of the VCR  
or DVD, refer to the operation manual of the  
VCR or DVD.  
For detailed information on the use of the  
Cable TV converter Box refer to their operating  
manuals.  
L
Using Your Remote With Your TV  
After installing the batteries, set the CATV/  
DVD-TV/VCR on the remote to the TV position.  
(If you can change the channel of the TV by  
pressing CH UP (8) or DOWN (9) on the  
Remote Control, it is the TV position.)  
DVD/VCR POWER  
Press to turn the VCR or DVD  
on and off.  
REMOTE KEYPAD  
Use to enter two-digit code  
numbers when identifying your  
VCR.  
POWER  
TV  
DVD  
VCR  
DISPLAY  
INPUT  
PLAY  
1
4
7
2
5
8
0
3
6
9
Press to playback a tape or disc.  
ENTER  
REWIND  
FF  
FLASHBACK  
ENTER  
Press to rewind a tape or disc.  
For some VCRs or DVDs you  
may need to press STOP first,  
then REWIND.  
Press to rapidly advance the  
tape or disc. For some VCRs or  
DVDs, you may need to press  
STOP first, then FF.  
100  
PERSONAL PREFERENCE  
A
B
C
D
CH  
CH  
VOL  
—
VOL  
+
VCR CHANNEL  
PAUSE  
MENU  
MUTE  
UP ( )/ DOWN (  
)
Press to temporary stop the  
tape or disc during playback  
or recording (VCR only).  
Press again to release Pause.  
Press to scan up or down through  
channels on the VCR.  
DVD SKIP  
Press to jump forward to the  
beginning of the next chapter/track,  
or backward to the beginning of the  
current chapter/track, and  
automatically start to play that  
chapter/track.  
CATV  
DVD  
TV  
VCR  
REW  
PLAY  
FF  
CH/SKIP  
PAUSE STOP  
REC  
STOP  
Press to stop the tape or disc.  
RECORD  
Press to begin recording.  
TV • CATV • VCR • DVD  
(VCR only)  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation of Remote Control (Continued)  
POWER  
DVD/VCR  
POWER  
TV  
DVD  
VCR  
DISPLAY  
INPUT  
TV  
POWER  
DISPLAY  
1
4
7
2
5
8
0
3
6
9
REMOTE  
KEYPAD  
FLASHBACK  
ENTER  
100  
PERSONAL PREFERENCE  
A
B
C
D
CH  
CH  
VOL  
—
VOL  
+
CHANNEL  
UP (8)/  
MENU  
REW  
MUTE  
CATV  
DVD  
TV  
DOWN (9)  
VCR  
CATV/DVD-TV/VCR  
PLAY  
FF  
CH/SKIP  
PAUSE STOP  
REC  
L
HOW TO IDENTIFY A VCR  
Some brands have more than one remote  
code listed, due to changes in the remote  
codes from early to later model years, or due  
to format differences (VHS/BETA). In such  
cases, you may have to try more than one code  
to find the code your VCR accepts.  
The remote control may already be set to  
operate your VCR. Try this initial check to see  
if going on to the following “identify” section is  
necessary.  
(1) Slide CATV/DVD-TV/VCR switch to VCR.  
(2) Point remote towards VCR and press DVD/  
VCR POWER.  
(3) Does the remote turn the VCR ON and OFF?  
• If yes, the remote is ready to operate the VCR  
and no further steps are needed.  
Note:  
Depending on the model, year produced,  
brand, and type of VCR, some models may  
not be compatible with the remote control.  
• If no, continue to the “identify” section.  
L
To Identify Your VCR – Search Method.  
L
To Identify Your VCR – Direct Entry Method.  
(1) Slide CATV/DVD-TV/VCR switch on the  
remote to VCR.  
(2) Press POWER on the VCR to ON.  
(3) Stand at least six feet away from the front of  
the VCR.  
Use the following steps and list to quickly find  
the remote control code for your accessory  
VCR.  
• First look up your VCR’s remote control code  
number before going through the direct code  
entry steps control.  
• If this procedure does not identify your  
accessory VCR, use the Search method of  
identification (described in the next section).  
Point the remote towards the VCR.  
Hold down DISPLAY and CH UP (8) at the  
same time. KEEP HOLDING THE BUTTONS  
DOWN.  
(4) Watch the Channel Number indicator on the  
VCR, Channel numbers will scan up when the  
VCR has been identified.  
(1) Slide CATV/DVD-TV/VCR switch to VCR.  
(2) Press and hold down DISPLAY and CH DOWN  
(9) on your remote control.  
Release DISPLAY and CH UP (8) as soon  
as the channel numbers start to scan up.  
The VCR’s remote control code number has  
been identified, and the remote is ready to  
operate the VCR.  
Then release both buttons.  
(3) Within ten seconds after releasing DISPLAY  
and CH DOWN (9) , enter your VCR’s two-  
digit remote control code number using  
REMOTE KEYPAD (refer to list).  
• The remote control is now ready to send  
commands to your VCR.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation of Remote Control (Continued)  
REMOTE CONTROL  
CODE NUMBER  
VCR BRAND  
POWER  
TV  
DVD  
VCR  
DISPLAY  
INPUT  
Akai  
25, 26, 37  
15, 22, 30  
32  
04  
34  
10, 31  
04  
34  
15, 22, 30  
29  
21, 32, 35  
09, 10, 11  
28, 29  
04  
TV  
POWER  
DISPLAY  
Audio Dynamics  
Broksonic  
Canon  
Capehart  
Craig  
Curtis Mathis  
Daewoo  
DBX  
Dynatech  
Emerson  
Fisher  
1
4
7
2
5
8
0
3
6
9
REMOTE  
KEYPAD  
FLASHBACK  
ENTER  
100  
PERSONAL PREFERENCE  
A
B
C
D
CH  
CH  
VOL  
VOL  
—
+
Funai  
GE  
CHANNEL  
UP (8)/  
DOWN (9)  
MENU  
REW  
MUTE  
Goldstar  
Hitachi  
Instant Replay  
JC Penney  
JVC  
24  
06  
04  
CATV  
DVD  
TV  
VCR  
CATV/DVD-  
TV/VCR  
04, 06, 24, 30  
15, 41, 42  
14, 15  
29  
PLAY  
FF  
CH/SKIP  
Kenwood  
Lloyds  
PAUSE STOP  
REC  
Magnavox  
Magnin  
04, 05, 08  
31  
Marantz  
Memorex  
Minolta  
30  
04, 10, 24, 29  
06  
TIPS ON IDENTIFYING YOUR VCR:  
If your VCR model does not have the CHANNEL  
UP function on its remote control, it cannot be  
identified using the SEARCH method of identifying.  
For such models, please try the DIRECT ENTRY  
method of identifying.  
Be Patient: a minute or two can seem a lot longer  
when you’re waiting for something to happen, but  
the code should be identified within 2 minutes.  
Remember, it is only a one-time set-up.  
Be careful not to let the VCR scan more than five  
channels when the indicator starts to move up. If  
you continue holding down the DISPLAY and CH  
UP (8) after five channel scans, the proper remote  
code can be passed up, and the two minutes identify  
cycle will have to be repeated.  
If a channel change does not occur on the VCR  
within two minutes, read the identifying instructions  
again and repeat the steps. Should a channel  
change still not occur the remote will not operate  
with the desired VCR.  
Mitsubishi  
Montgomery Ward  
Multitech  
NEC  
Panasonic  
Pentax  
Philco  
Philips  
Quasar  
RCA  
Realistic  
Samsung  
Sanyo  
Scott  
Sears  
Sharp  
Shintom  
Sony  
Sound Design  
Sylvania  
Symphonic  
Tatung  
17, 18, 39, 40  
02, 43  
29  
15, 22, 30  
04, 44  
05, 06  
04, 05  
04, 05, 08  
04  
06, 07, 33  
01, 02, 10, 24  
23, 31  
14, 10  
20  
06, 11, 24  
01, 02, 03  
36  
12, 13, 38  
29  
04, 05, 08  
29  
15  
Teac  
15, 29  
27, 29  
29  
Teknika  
Thomas  
TMK  
21  
Toshiba  
Video Concepts  
Yamaha  
Zenith  
19, 20  
30  
15, 29, 30  
16  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation of Remote Control (Continued)  
POWER  
DVD/VCR  
POWER  
TV  
DVD  
VCR  
DISPLAY  
INPUT  
TV  
POWER  
INPUT  
1
4
7
2
5
8
0
3
6
9
DISPLAY  
REMOTE  
KEYPAD  
FLASHBACK  
ENTER  
100  
PERSONAL PREFERENCE  
A
B
C
D
CH  
CH  
VOL  
—
VOL  
+
CHANNEL  
UP (8)/  
DOWN (9)  
MENU  
MUTE  
CATV  
DVD  
TV  
VCR  
CATV/DVD-  
TV/VCR  
REW  
PLAY  
FF  
CH/SKIP  
PAUSE STOP  
REC  
L
HOW TO IDENTIFY A DVD  
REMOTE CONTROL  
CODE NUMBER  
DVD BRAND  
The remote control may already be set to  
operate your DVD. Try this initial check to see  
if going on to the following “identify” section is  
necessary.  
Denon  
JVC  
02  
09  
04  
04  
06  
02  
04  
08  
03  
03  
07  
01  
05  
04  
02  
04  
Magnavox  
Marantz  
Mitsubishi  
Panasonic  
Philips  
Pioneer  
Proscan  
RCA  
Samsung  
Sharp  
Sony  
Toshiba  
Yamaha  
Zenith  
(1) Slide CATV/DVD-TV/VCR switch to DVD.  
(2) Point remote towards DVD and press DVD/  
VCR POWER.  
(3) Does the remote turn the DVD ON and OFF?  
• If yes, the remote is ready to operate the DVD  
and no further steps are needed.  
• If no, continue to the “identify” section.  
L
To Identify Your DVD – Direct Entry Method.  
Use the following steps and list to quickly find  
the remote control code for your accessory  
DVD.  
• First look up your DVD’s remote control code  
number before going through the direct code  
entry steps control.  
Note:  
Depending on the model, year produced,  
brand, and type of DVD, some models may  
not be compatible with the remote control.  
(1) Slide CATV/DVD-TV/VCR switch to DVD.  
(2) Press and hold down INPUT and CH DOWN  
(9) on your remote control.  
Then release both buttons.  
(3) Within ten seconds after releasing INPUT and  
CH DOWN (9), enter your DVDs two-digit  
remote control code number using REMOTE  
KEYPAD (refer to list).  
• The remote control is now ready to send  
commands to your DVD.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation of Remote Control (Continued)  
L
L
HOW TO IDENTIFYA CABLE CONVERTER  
REMOTE CONTROL  
CODE NUMBER  
CATV CONVERTER  
To Identify Your Cable Converter –Direct  
BRAND  
Entry Method.  
Use the following steps and list to quickly find  
the remote control code for your cable TV  
converter.  
• First look up your converter’s remote code  
number before going through the direct code  
entry steps below.  
• If this procedure does not identify your  
converter, use the Search method of  
identification.  
Anvision  
Cable Star  
Eagle  
General Instrument  
07, 08  
07, 08  
08  
04, 05, 15, 23, 24, 25,  
30, 36  
04, 05, 15, 23, 24, 25  
30, 36  
07, 08, 19, 25, 28, 29,  
32, 33, 40, 41  
18  
Jerrold  
Magnavox  
Oak Sigma  
Panasonic  
Philips  
27, 39  
(1) Slide CATV /DVD-TV/VCR switch to CATV.  
(2) Press and hold down DISPLAY and CH DOWN  
(9) on your remote control.  
07, 08, 19, 26, 28, 29,  
32, 33, 40, 41  
18, 20  
07, 08  
27, 43  
03, 22, 42  
44  
07, 08, 19, 26, 28, 29  
32, 33, 40, 41  
14  
Pioneer  
Randtek  
RCA  
Scientific Atlanta  
Sony  
Then release both buttons.  
(3) Within ten seconds after releasing DISPLAY  
and CH DOWN (9), enter your converter’s  
two-digit code number using REMOTE  
KEYPAD (refer to list).  
Viewstar  
• The remote control is now ready to send  
commands to your converter.  
Zenith  
• Some brands have more than one remote  
code listed due to changes in the remote codes  
from early to later model years. In such cases,  
you may have to try more than one code to  
find the code your converter accepts.  
TIPS ON IDENTIFYING YOUR CABLE  
CONVERTER:  
Be Patient: a minute or two can seem a lot  
longer when you’re waiting for something to  
happen, but the code should be identified  
within 2 minutes. Remember, it is only a one-  
time set-up.  
Be careful not to let the CATV converter scan  
more than five channels when the indicator  
starts to move up. If you continue holding down  
the DISPLAY and CH UP (8) after five channel  
scans, the proper remote code can be passed  
up, and the two minutes identify cycle will have  
to be repeated.  
If a channel change does not occur on the  
cable converter within two minutes, read the  
identifying instructions again and repeat the  
steps. Should a channel change still not occur,  
the remote will not operate with the desired  
converter.  
Note:  
Depending on the model, year produced,  
brand, and type of CATV converter, some  
models may not be compatible with the remote  
control.  
L
To Identify Your Cable Converter – Search  
Method.  
(1) Slide CATV /DVD-TV/VCR switch to CATV.  
(2) Press the POWER button on the cable  
converter to ON.  
(3) Stand at least six feet away from the converter.  
Point the remote towards the converter.  
Hold down the DISPLAY and CH UP (8) at  
the same time. KEEP HOLDING THE  
BUTTONS DOWN.  
Note:  
(4) Watch the Channel Number indicator on the  
converter.  
Some satellite receivers can be operated by  
the REMOTE CONTROL. If you have a  
Satellite Receiver, you can use the above  
method to search for available channels.  
Channel numbers will scan up when the  
converter has been identified.  
Release the DISPLAY and CH UP (8) as soon  
as the channel numbers start to scan up.  
The converter’s remote control code number  
has been identified, and the remote is ready  
to operate the converter.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before Calling for Service  
Check these items and see if you can correct trouble with a slight adjustment of the controls.  
QUICK SERVICE  
CHECK LIST  
POSSIBLE REMEDY  
Try a new channel, if OK, then  
possible station trouble.  
X
X
X X X X X  
X
X X X X X X X X  
X
Is TV plugged in? Power at outlet?  
Is TV’s POWER button on?  
X
X
X
X
X X X X X  
X X X X X  
X
X
X X X X X X X X  
X X X X X X X X  
X
X
Is antenna connected to terminal on  
the back of the set?  
X
X
X
X
X X X X X  
X X X X X  
X
X
X X X X X X X X  
X X X X X X X X  
X
X
If outside antenna is being used,  
check for broken wire.  
Check for local interference or  
external electrical noise.  
X
X
X
X
X X X X X  
X X X X X  
X
X
X X X X X X X X  
X X X X X X X X  
X
X
Turn off with POWER button and  
then turn it on after about a minute.  
Adjust COLOR control.  
Adjust PICTURE control.  
X
X
X
X
X X X X X  
X X X X X  
X
X
X X X X X X X X  
X X X X X X X X  
X
X
Check external Video/Audio  
products: look for loose/broken  
connection leads. (Refer to page  
33)  
X
X
X X X X X  
X
X X X X X X X X  
X
Check batteries of Remote Control.  
X
X
X
X
X X X X X  
X X X X X  
X
X
X X X X X X X X  
X X X X X X X X  
X
X
Change Closed Caption mode to  
“OFF” / Energy Save mode to  
“OFF”.  
Unplug the TV and plug it in again  
after two minutes or longer.  
X
X
X X X X X  
X
X X X X X X X X  
X
X
Note:  
• When viewing in TEXT mode, if no TEXT broadcast is being received,  
the screen may become dark and blank. Should this occur, set the  
Closed Caption mode to “OFF”.  
(Dark and Blank Picture)  
Calling for Service  
For location of the nearest SharpAuthorized Service, or to obtain product literature accessories, supplies,  
or customer assistance, please call 1-800-BE-SHARP.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Antes de llamar al servicio de reparaciones  
Verifique estos items para ver si usted mismo puede solucionar el problema.  
LISTA DE  
COMPROBACIONES  
DE SERVICIO  
RAPIDO  
POSIBLE SOLUCIÓN  
Pruebe con otro canal y si todo está  
bien, el problema puede ser de la  
emisora.  
X
X
X
X
X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X  
X
X
Está conectado el televisor?  
Llega electricidad al tomacorrientes?  
Está conectado el interruptor del  
televisor?  
X
X
X
X
X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X  
X
X
Está conectado la antena al terminal  
del panel posterior del televisor?  
Si utiliza una antena exterior,  
cerciórese de que el cable no esté  
dañado.  
X
X
X
X
X
X
X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X  
X
X
X
Compruebe si hay interferencia local.  
Desconecte el interruptor POWER y  
vuelva a conectarlo después de  
transcurrir un minuto.  
Ajuste el control de COLOR.  
Ajuste el control de MATIZ.  
X
X
X
X
X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X  
X
X
Verifique los productos externos de  
Video/Audio, revise si hay fugas de  
conexiones sueltas o rotas.  
X
X
X
X
X
X
X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X  
X
X
X
Compruebe el estado de las pilas del  
mando a distancia.  
Desactive (OFF) el modo CLOSED  
CAPTION / Desactive (OFF) el modo  
Ahorro de Energía (Energy Save).  
Desenchufe el televisor y vuelva a  
enchufarlo despúes de dos minutos  
o más.  
X
X
X X X X X X X X X X X X X X  
X
X
Nota:  
• Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la  
pantalla puede ponerse en blanco y negro. Si ocurriera ésto, ponga  
el modo CLOSED CAPTION en OFF.  
(Imagen oscura y en blanco)  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
MODEL  
25R-S100  
NTSC  
Receiving System  
Reception Channels  
AIR  
VHF  
2-13 ch  
UHF 14-69 ch  
1-125 ch  
CATV  
Channel Tuning  
Antenna Input Impedance  
Screen Size  
181-channel Reception PLL tuning system  
VHF/UHF 75 ohm Unbalance  
25˝ Diagonally Measured  
Audio/Video input x 2 (Front x 1, Rear x 1)  
1.5 W (RMS) x 2  
Terminals  
Sound Output  
Power Source  
Power Consumption  
Dimensions  
AC 120 V, 60 Hz  
100 W  
2445/64˝ (W) x 2211/64˝ (H) x 209/32˝ (D)  
[626.5 mm (W) x 563.0 mm (H) x 514.5 mm (D)]  
Weight (approx.)  
61.7 lbs. (28.0 kg)  
• Design and specifications are subject to change without notice.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty  
CONSUMER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp  
brand product (the “Product”), when shipped in its original container, will be free from defective  
workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the  
defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser  
for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product nor to the additional excluded  
item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which  
has been subjected to improper voltage or other misuse, abnormal service or handling, or which has  
been altered or modified in design or construction.  
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth  
below and provide proof of purchase to the servicer.  
The limited warranty described herein is in addition to whatever implied warranties may be granted to  
purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF  
MERCHANTABILITYAND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE  
OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied  
warranty lasts, so the above limitation may not apply to you.  
Neither the sales personnel of the seller nor any other person is authorized to make any warranties  
other than those described herein, or to extend the duration of any warranties beyond the time period  
described herein on behalf of Sharp.  
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall  
be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and  
for the period of time described herein, shall constitute complete fulfillment of all liabilities and  
responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction  
of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp  
be liable or in any way responsible, for any damages or defects in the Product which were caused by  
repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be  
liable or in any way responsible for any incidental or consequential economic or property damage.  
Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion  
may not apply to you.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS  
WHICH VARY FROM STATE TO STATE.  
Model Specific Section  
Your Product Model Number & Description:  
Warranty Period for this Product:  
25R-S100, 25 inch Color Television (Be sure to have  
this information available when you need service for  
your Product.)  
One (1) year parts and (90) days labor. The warranty  
period continues for an additional one (1) year, for a  
total of two (2) years, with respect to the picture  
tube(s) in the Product for parts only. Labor and  
service are not provided free of charge for this  
additional period.  
Additional Item(s) Excluded from  
Warranty Coverage (if any):  
Non-rechargeable batteries.  
Where to Obtain Service:  
From a Sharp Authorized Servicer located in the  
United States. To find the location of the nearest  
Sharp Authorized Servicer, call Sharp toll free at 1-  
800-BE-SHARP.  
What to Do to Obtain Service:  
Contact your Sharp Authorized Servicer to obtain  
in-home service for this Product. The Servicer will  
come to your home and if it is necessary to remove  
the Product, the Servicer will reinstall it. Be sure to  
have Proof of Purchase available.  
TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharp-usa.com  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07430-2135  
Printed in Mexico  
TINS-7290GJZZ  
1P03-MMP  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Calculator EL 240S User Manual
Shure Musical Instrument MX400D User Manual
Snapper Snow Blower SS5200E User Manual
Sony Camera Lens VCL ES20A User Manual
Sony CD Player CDP 608ESD User Manual
Speco Technologies Security Camera CVC 652HZ User Manual
Sprint Nextel Cordless Telephone SP 515 User Manual
Sunbeam Hair Dryer 1632 User Manual
Sunfire Range X24 4L User Manual
T Mobile Cell Phone t mobile dash User Manual