models
25N-S100
25N-S180
27N-S100
27N-S180
C O N T E N T S
Page
Page
• Important Information .................................. 2 - 3
• Important Safeguards .................................. 3 - 4
• Supplied Accessories ....................................... 5
• Before Operating Your Television ..................... 5
• Antenna Connections ........................................ 6
• Quick Reference Control Operation ............. 7 - 9
• EZ SETUP during First Power On .................. 10
• Demo Mode ..................................................... 11
• Accessing the MAIN MENU screen
• View Timer .............................................. 23 - 25
• Energy Save .................................................... 25
• Set Up....................................................... 26 - 31
• EZ Setup ....................................................... 26
• Channel Setting ...................................... 27 - 29
• Blue Screen ............................................ 29 - 30
• Personal Preference............................... 30 - 31
• Universal Plus Function................................. 31
• Using the Video and Audio
without Remote Control ................................... 11
• Language......................................................... 11
• Sleep Timer ..................................................... 12
• Video Adjust .............................................. 12 - 13
• Audio Select ............................................. 13 - 14
• MTS (Multichannel TV Sound) ............... 13 - 14
• Closed Caption ......................................... 14 - 15
Input Jacks ............................................... 32 - 33
• Using the Audio Output Jacks ......................... 33
• Operation of Remote Control.................... 34 - 37
• Before Calling for Service ................................ 38
• Limited Warranty............................................. 40
This operating manual includes basic operating
instructions in Spanish and French.
SPANISH is on pages 8, 39.
• Parent Control .......................................... 15 - 25
• V-CHIP Block.......................................... 15 - 22
FRENCH is on page 9.
A
E
s an
NERGY
trademark.
E
NERGY
S
S
TAR®
Partner, SHARP has determined that this product meets the
TAR® guidelines for energy efficiency.
E
NERGY
S
TAR® is a U.S. registered
6930 MEN1
0-9 25&27NS100/180 1.4
1
6/1/00, 2:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information (Continued)
WARNING - FCC Regulations state that any unauthorized changes or modifications to this
equipment not expressly approved by the manufacturer could void the user’s authority
to operate this equipment.
Important Safeguards
CAUTION: Please read all of these instructions before you operate your television and save
these intructions for later use.
Electrical energy can perform many useful functions. This unit has been engineered and manufactured
to assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL
SHOCK OR FIRE HAZARDS. In order not to defeat the safeguards incorporated in this equipment,
observe the following basic rules for its installation, use and servicing.
1. Unplug this television equipment from the wall outlet before cleaning.
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use attachments not recommended by the television equipment manufacturer as they may
cause hazards.
4. Do not use this television equipment near water — for example, near a bathtub, washbowl, kitchen
sink or laundry tub, in a wet basement, or near a swimming pool, etc.
5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall,
causing serious injury to a child or an adult, and serious damage to the equipment. Use only with a
cart or stand recommended by the manufacturer or sold with the television equipment.
6. Television equipment and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the equipment and cart combination
to overturn.
7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a
mounting kit approved by the manufacturer.
8. Slotsandopeningsinthecabinetandthebackorbottomareprovidedforventilation. Toinsurereliable
operation of the television equipment and to protect it from overheating, these openings must not be
blocked or covered. This television equipment should not be placed in a built-in insulation such as a
bookcase unless proper ventilation is provided.
9. The openings should never be covered with a cloth or other material, and the bottom openings should
not be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This
television equipment should never be placed near or over a radiator or heat register.
10. This television equipment should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your home, consult your television
dealer or local power company.
For television equipment designed to operate from battery power, refer to the operating instructions.
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade
bigger than the other). The 2-wire polarized plug will fit only one way into the power outlet.
If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and
defeat this safety feature.
12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord
will be abused by persons walking on it.
13. Follow all warnings and instructions marked on the television equipment.
3
0-9 25&27NS100/180 1.4
3
6/1/00, 2:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards (Continued)
14. Ifanoutsideantennaisconnectedtothetelevisionequipment,besuretheantennasystemisgrounded
so as to provide some protection against voltage surges and built-up static charges. Section 810 of
the National Electrical Code provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors,locationofantenna-dischargeunit,connectiontogroundingelectrodes,andrequirements
for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
ACCORDING TO NATIONAL ELECTRICAL CODE.
ANTENNA LEAD-IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
SERVICE
EQUIPMENT
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC PART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
15. For added protection for this television equipment during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This
will prevent damage to the equipment due to lightning and power-line surges.
16. Anoutsideantennasystemshouldnotbelocatedinthevicinityofoverheadpowerlinesorotherelectric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
18. Never push objects of any kind into this television equipment through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the television equipment.
19. Do not attempt to service this television equipment yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the television equipment.
C. If the television equipment has been exposed to rain or water.
D. Ifthetelevisionequipmentdoesnotoperatenormallybyfollowingtheoperatinginstructions.Adjust
only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the television equipment to normal operation.
E. If the television equipment has been dropped or the cabinet has been damaged.
F. When the television equipment exhibits a distinct change in performance — this indicates a need
for service.
21. Upon completion of any service or repairs to this television equipment, ask the service technician to
perform routine safety checks to determine that the television is in safe operating condition.
22. When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
4
0-9 25&27NS100/180 1.4
4
6/1/00, 2:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied Accessories
Size AA
Dry Batteries
Infrared Remote Control
Part Number : RRMCG1395CESA
Before Operating Your Television
Location
• For normal operation, your TV should be located in an area of the room where cool adequate ventilation
is provided. Do not place the back of the television set in a place where free airflow will be restricted.
• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using
magnets or any other magnetic substance, such as iron are kept well away from this TV set.
Power
Your TV operates on 120 Volts, 60 Hertz (normal household current) and has a polarized plug. If you
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.
NOTE:
• If the set will not be used for a long period, such as during a vacation, unplug the set from the wall
outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near
the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off
either the TV or the radio.
• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to the interference of the TV.
L
Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Insert the batteries
Pull up
Battery
Cover
• With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert two
batteries (size “AA”). Be sure to match the battery e/d terminals with the e/d marks inside the
compartment.
5
0-9 25&27NS100/180 1.4
5
6/1/00, 2:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Connections
Antennas
• The antenna requirements for good color television reception are more important than those for
black & white television reception. For this reason, a good quality outdoor antenna is strongly
recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
1. A 75 ohm system is generally a round cable with F-type connector
that can easily be attached to a terminal without tools (not
supplied). The F-type connector should be finger tightened
only.
2. A 300 ohm system is a flat “twin-lead” cable that can be attached
to a 75 ohm terminal through a 300-75 ohm ADAPTOR (not
supplied).
OUTDOOR ANTENNA CONNECTION
• Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
• Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the
TV set.
A. Combination VHF/UHF
B. Separate VHF/UHF
CABLE TV (CATV) CONNECTION
• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber
by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled
channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your
cable TV company. One possible method of utilizing the converter/descrambler provided by your
cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s
channel keys.
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/
descrambler using the converter’s channel keys.
RF switch (not supplied)
Two-set
signal
splitter
(not
Cable TV Line
supplied)
OUT
IN
NOTE:
Cable TV converter/
descrambler
• Consult your SHARP Dealer or Service
Center for the type of splitter, RF switch
or combiner that might be required.
(not supplied)
6
0-9 25&27NS100/180 1.4
6
6/1/00, 2:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Reference Control Operation
25N-S100, 25N-S180
L Location of Controls
POWER
—
VOL
+
CH
Front Panel
E
POWER
—
VOL +
CH
A
A
B
POWER
Press → On.
Press again → Off.
B
C
D
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
27N-S100, 27N-S180
C
D
SENSOR AREA FOR REMOTE CONTROL
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
E
• Press both at same time to access MAIN MENU Screen.
A
IN 2
TERMINALS
E
VIDEO/AUDIO
(VIDEO/AUDIO terminals are also provided on the rear.)
C
D
B
Basic Remote Control Functions
Infrared Transmitter Window
POWER
DISPLAY
Press → On.
Press → Displays receiving channel for
Press again → Off.
four seconds.
Press again → Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
INPUT
Press → Switch to external video
PERSONAL PREFERENCE
INPUT 1 mode.
With the Personal Preference buttons,
you can program your favorite
programs by using the four categories
A, B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 30.)
Press again → Switch to external video
INPUT 2 mode.
Press again → Switch back to the
original TV mode.
See page 33.
ENTER
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
In menu mode, changes or selects
the TV adjustments.
Used in some instances where a VCR
or Cable Converter Box requires an
“enter” command after selecting
channels, when using the REMOTE
KEYPAD button. (See page 34)
•
MENU
Press → Accesses MAIN MENU.
CHANNEL UP/DOWN
Press again → Exits MAIN MENU.
(8) Selects next higher channel.
(9) Selects next lower channel.
• See pages 27 - 29 for channel
presetting.
TV-CATV MODE SELECT SWITCH
In TV position, sends power and
channel select commands (Channel
up/down and RandomAccess buttons)
to the TV.
• Moves the “ ” mark of the MENU
screens.
In CATV position, sends power and
channel select commands to a cable
TV converter.
MUTE
Press → Mutes sound.
Press again → Restores sound.
• CLOSED CAPTION appears when
sound is muted.
VCR CONTROL
See page 34.
NOTE:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
7
0-9 25&27NS100/180 1.4
7
6/1/00, 2:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Referencia rápida de los controles de operación
L Ubicación de los Controles
(ESPAÑOL)
25N-S100, 25N-S180
Front Delantero
A
ALIMENTACION (POWER)
POWER
—
VOL
+
CH
Pulsando → Enciende (On).
E
POWER
—
VOL +
Pulsando nuevamente → Apaga (Off).
CH
A
B
AUMENTO/DISMINUCION DEL VOLUMEN (VOL)
(+) Aumenta el sonido.
(–) Disminuye el sonido.
C
D
B
C
D
ZONA DEL SONSOR DEL MANDOA DISTANCIA
27N-S100, 27N-S180
CANAL SUPERIOR/INFERIOR (CH)
(8) Selecciona el siguiente canal superior.
(9) Seleccioal el siguiente canal inferior.
•
Pulse los dos a la misma vez para acceder a la pantalla de MENU
PRINCIPAL.
E
A
E
TERMINALES DE ENTRADA VIDEO/AUDIO TERMINALS IN 2
(Las terminales VIDEO/AUDIO también se encuentran en la parte posterior.)
B
C
D
Funciones Basicas Del Control Remoto
ALIMENTACION (POWER)
Pulsando → Enciende (On).
Pulsando nuevamente → Apaga (Off).
Ventanilla del transmisor de infrarrojos
VISUALIZACION (DISPLAY)
Pulsando
→
Aparece el canal de
POWER
TECLADO A DISTANCIA
(REMOTE KEYPAD)
Para tener acceso a cualquier canal
empleando las teclas.
recepción por cuatro segundos.
Pulsando nuevamente → Elimina la
visualización.
TV
VCR
DISPLAY
INPUT
•
En el modo de “Closed Caption” se
muestra el canal de recepción por un
corto tiempo.
1
4
2
5
8
0
3
6
9
RETORNO AL CANAL
ANTERIOR (FLASHBACK)
Para volver al canal anterior.
ENTRADA (INPUT)
Pulsando → Cambia al modo de entrada
1 del vídeo externo.
Pulsando nuevamente → Cambia al modo
de entrada 2 del vídeo externo.
Pulsando nuevamente → Vuelve al modo
TV original.
7
PREFERENCIAS PERSONALES
Con los botones Personal Preference
puede programar sus programas favoritos
utilizando las cuatro categorías
A, B, C y D.
FLASHBACK
ENTER
100
PERSONAL PREFERENCE
A
B
C
D
CH
CH
VOL
—
VOL
+
Puede acceder a los canales rápidamente
utilizando estos botones.
INTRODUCIR (ENTER)
MENU
MUTE
Se utiliza en algunos casos en los cuales
un VCR o una Caja de Inversor de Cable
requiere una orden “enter” después de
seleccionar los canales, al usar el teclado
a distancia.
AUMENTO/DISMINUCION DEL
VOLUMEN (VOLUME UP/DOWN)
(+) Aumenta el sonido.
CATV
TV
(–) Disminuye el sonido.
•
En modo de MENU cambia
selecciona el ajuste del televisor.
o
REW
PLAY
FF
CANAL SUPERIOR/INFERIOR
(CHANNEL UP/DOWN)
(8) Selecciona el siguiente canal
superior.
VCR CH
PAUSE STOP
REC
PREPARACION (MENU)
Pulsando
PRINCIPAL.
→
Accede al MENU
(9) Selecciona el siguiente canal inferior.
Pulsando nuevamente → Sale del MENU
PRINCIPAL.
•
En el modo de MENU, mueve la marca
”.
Q1395SA
“
CONMUTADOR SELECTOR DE
SILENCIAMIENTO (MUTE)
Pulsando → Silencia el sonido.
Pulsando nuevamente → Restaura el
sonido.
TELEVISOR/TV POR CABLE (TV-CATV)
En la posición TV, el mando envia los
comandos de alimentación y selección de
canales (botones de canal superior/inferior
y de acceso aleatorio) a un televisor.
En la posición CATV, envia los comandos
de alimentación y selección de canales a
un convertidor de TV por cable.
TV • VCR • CATV
•
CLOSED CAPTION aparece automáti-
camente cuando el sonido es silencia-
do.
Siempre y cuando la transmisión tenga
esta señal.
CONTROLES DEL VIDEO
NOTA:
• Los botones que arriba pueden verse sombreados en el Control Remoto lucen en la oscuridad. Para usar el visor
del control remoto que luce en la oscuridad, colocarlo bajo una luz fluorescente u otra fuente luminosa.
• El material fosforescente no contiene elementos radiactivos ni tóxicos, de modo que su uso no representa ningún
peligro.
• El grado de iluminación variará de acuerdo con la potencia de la luz utilizada.
• El grado de iluminación irá decayendo con el tiempo y dependiendo de la temperatura.
• El tiempo necesario para cargar el visor fosforescente variará de acuerdo con la iluminación circundante.
• La luz del sol y la luz fluorescente son las más eficaces para la carga del visor.
8
0-9 25&27NS100/180 1.4
8
6/1/00, 2:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Référence rapide sur les commandes
(FRANÇAIS)
L Emplacement des touches
25N-S100, 25N-S180
Panneau avant
A
B
ALIMENTATION (POWER)
Appuyer pour mettre sous tension.
Appuyer de nouveau pour mettre hors tension.
POWER
—
VOL
+
CH
E
POWER
—
VOL +
CH
A
AUGMENTATION/RÉDUCTION DU VOLUME SONORE (VOL)
(+) Pour augmenter le volume du son.
(–) Pour diminuer le volume du son.
D
B
C
C
D
ZONE DE DÉTECTION DU CAPTEUR
27N-S100, 27N-S180
TOUCHES DES CANAUX CROISSANT/DÉCROISSANT (CH)
(8) Selectionne le canal supérieur suivant.
(9) Sélectionne le canal inféfieur précédent.
• Appuyez sur les deux poussoirs simultanément pour accéder á l’écran
du MENU PRINCIPAL.
E
A
IN 2
PRISES D’ENTRÉE VIDÉO/AUDIO
E
(Les prises VIDÉO/AUDIO sont également reprises à l’arriére.)
C
B
D
Fonctions de base de la télécommande
Fenêtre d’émission du signal infrarouge
ALIMENTATION (POWER)
Appuyer pour mettre sous tension.
Appuyer de nouveau pour mettre hors
tension.
AFFICHAGE (DISPLAY)
Appuyer pour afficher le canal reçu
pendant quatre secondes.
Appuyer de nouveau pour faire disparaître
le canal.
PAVÉ NUMÉRIQUE DE COMMANDE A
DISTANCE (REMOTE KEYPAD)
Sélectionne directement le canal voulu sur
le pavé numérique.
•
Pour afficher temporairement le canal
reçu en mode Sous-titrage.
ENTRÉE (INPUT)
Appuyer pour sélectionner le mode
ENTRÉE 1 vidéo externe.
RETOUR (FLASHBACK)
•
Rappelle le dernier canal regardé.
Appuyer de nouveau pour sélectionner le
mode ENTRÉE 2 vidéo externe.
Appuyer de nouveau pour revenir au
mode TV initial.
PRÉFÉRENCES PERSONNELLES
Grâce aux touches de préférence
personnelle, vous pouvez programmer
vos programmes préférés à l’aide des
quatre catégories : A, B, C et D. Ces
touches vous permettent d’accéder
rapidement à ces canaux.
ENTRER (ENTER)
Parfois utilisée lorsqu’un magnétoscope ou
un convertisseur nécessite l’introduction
d’une commande «enter» après la
sélection de canaux à l’aide du pavé
numérique de commande à distance.
AUGMENTATION/RÉDUCTION DU
VOLUME SONORE (VOLUME UP/
DOWN)
(+) Pour augmenter le volume du son.
(–) Pour diminuer le volume du son.
TOUCHES DES CANAUX CROISSANT/
DÉCROISSANT (CHANNEL UP/DOWN)
(8) Sélectionne le canal supérieur suivant.
(9) Sélectionne le canal inférieur précedént.
•
Pour changer ou sélectionner les
réglages du téléviseur en mode menu.
•
Déplace le curseur « » sur l’écran du
MENU
RÉGLAGE (MENU)
Appuyer → Accès au MENU PRINCIPAL.
Appuyer de nouveau → Sortie du MENU
PRINCIPAL.
SOURDINE (MUTE)
Appuyer → Mise en sourdine du son.
Appuyer de nouveau → Rétablissement
du son.
SÉLECTEUR DE MODE TÉLÉVISION/
CÂBLOVISION (TV-CATV)
En position télévision (TV), permet de
mettre le téléviseur sous/hors tension et
de sélectionner ses canaux (touches de
canaux en ordre croissant/décroissant et
d’accès direct).
•
CLOSED CAPTION apparaît lorsque le
son est mis en sourdine.
COMMANDE DU MAGNÉTOSCOPE
En position câblovision (CATV), permet de
mettre un convertisseur de téléviseur par
câble sous/hors tension et de sélectionner
ses canaux.
REMARQUE :
• Les boutons ombrés de la télécommande illustrés ci-dessus brillent dans l’obscurité lorsque la télécommande a
été placée sous une ampoule fluorescente ou toute autre source lumineuse.
• Le matériau phosphorescent n’est absolument pas toxique ou radioactif. Il peut donc être utilisé en toute sécurité.
• Le degré d’illumination variera en fonction de l’intensité de la source d’éclairage.
• Le degré d’illumination diminuera avec le temps, en fonction de la température.
• Le temps requis pour charger les touches phosphorescentes dépendra de l’éclairage environnant.
• Les rayons directs du soleil et les luminaires fluorescents constituent les meilleures sources de chargement des
touches phosphorescentes.
9
0-9 25&27NS100/180 1.4
9
6/1/00, 2:06 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
EZ SETUP during First Power On
L
When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels.
POWER
Please perform the following instructions before you press the
power button.
VOLUME
(+)/(–)
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See page 6)
(3) Plug in the AC POWER cord to the wall outlet.
CHANNEL
UP (8)/
DOWN (9)
MENU
1 Press the POWER button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE mode will be
displayed.
(Remote Control)
(On the Set)
(SELECT LANGUAGE mode)
2 Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
3 Press VOL (+) or (–) to access the EZ SETUP mode.
(EZ SETUP mode)
4 Press VOL (+).
The tuner will automatically search for the broadcasting
and cable TV channels. (The CH No. will automatically
increase when it appears.)
If you want to stop the EZ SETUP process once it has
started, press VOL (–) and it will be canceled.
If you want to SETUP again, please refer to page 26 on
SETUP.
To cancel EZ SETUP
Press VOL (–).
5 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
NOTE:
• If EZ SETUP does not memorize all the channels in your region, please refer to page 28 - 29
for more information on manually memorizing the channels using CHANNEL MEMORY.
• It may be difficult to PRESET all channels in an area when the broadcasting signals are weak
or multiple stations are received on the same channel. Please refer to pages 28 - 29 for more
information on manually memorizing additional channels using CHANNEL MEMORY.
10
10-18 25&27NS100/180 1.4
10
6/1/00, 2:07 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
DEMO Mode
(On the set)
• To quickly learn more about the TV set, press and hold for more than
three seconds both CH UP (8) and DOWN (9) on the TV set. The TV
set will go into DEMO mode and briefly explain the various features.
• To cancel DEMO mode, again press both CH UP (8) and DOWN (9)
on the TV set.
9
8
CH
MENU
Accessing the MAIN MENU screen without Remote Control
• If you misplaced your Remote Control you can still access most
(On the set)
settings via the MAIN MENU screen when you press both CH UP (8)
9
8
CH
and DOWN (9) on the TV set.
• Some features of your TV set will not be accessible without the Remote
Control. If you lost your Remote Control, contact a Sharp Authorized
Servicer by calling 1-800-BE-SHARP for a replacement.
MENU
Language
L
L
The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
Setting the ON SCREEN DISPLAY Language.
1 Press MENU to access MAIN MENU screen.
(MAIN MENU screen)
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET UP”.
3 Press VOL (+) or (–) to access SET UP mode, then press
CH UP (8) or DOWN (9) to move the “ ” mark to “LANGUAGE”.
→
(MAIN MENU screen)
4 Press VOL (+) or (–) to access LANGUAGE change mode.
(LANGUAGE change mode)
5 Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
6 Press MENU to exit.
11
10-18 25&27NS100/180 1.4
11
6/1/00, 2:07 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleep Timer
L
You can set the number of minutes for your TV to automatically turn off.
1 Press MENU to access MAIN MENU screen.
2 Press VOL (+) or (–) to access TIMER SET mode.
→
(MAIN MENU screen)
(TIMER SET mode)
3 Press VOL (+) or (–) to set a sleep time of 30, 60, 90 or 120 minutes.
4 Press MENU to exit.
→
NOTE:
• To turn off the Sleep Timer, repeat the above SLEEP TIMER steps and select “– – – REMAIN” during
step 3.
• While Sleep Timer is active, the time remaining will be briefly displayed on-screen at regular intervals
or when the remote’s Display key is pressed.
Video Adjust
Description of Adjustment Items
VOLUME
Selected item
PICTURE
TINT
VOL UP (+) button
VOL DOWN (–) button
To decrease contrast
(+)/(–)
To increase contrast
To make skin tones greenish
To increase color intensity
To increase brightness
To increase sharpness
To make skin tones purplish
To decrease color intensity
To decrease brightness
To decrease sharpness
CHANNEL
UP (8)/
DOWN (9)
MENU
COLOR
BRIGHT
SHARP
FAVORITE COLOR
RESET
To choose a RED, BLUE or STANDARD COLOR TONE.
To return all adjustments to factory preset levels.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “VIDEO
ADJUST”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access PICTURE adjust mode.
(PICTURE adjust mode)
4 Press CH UP (8) or DOWN (9) to select the desired mode.
(Refer to the diagram below.)
12
10-18 25&27NS100/180 1.4
12
6/1/00, 2:07 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Adjust (Continued)
5 Press VOL (+) or (–) to adjust the setting.
VOL UP (+)
increase contrast
VOL DOWN (–)
decrease contrast
6 Repeat steps 4 - 5 to adjust other settings.
7 Press MENU to exit.
Audio Select
L
L
MTS (MULTICHANNEL TV SOUND)
This circuit allows reception of stereo or bilingual TV sound.
INTERNAL SPEAKER SWITCH (25N-S180 and 27N-S180 only)
This function turns the TV’s internal speakers “ON” or “OFF” when listening to sound from
external speakers by using the AUDIO OUTPUT JACKS on page 33.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “AUDIO
SELECT”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access AUDIO SELECT mode.
NOTE:
• SPEAKER: OFF is for 25N-S180 and 27N-S180 only.
• For models 25N-S100 or 27N-S100, skip to Step 5.
(AUDIO SELECT mode)
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to “MTS”,
or “SPEAKER”.
5 Press VOL (+) or (–) to change the AUDIO SELECT setting.
(For 25N-S180 and 27N-S180 only)
(AUDIO SELECT setting)
6 Press MENU to exit.
13
10-18 25&27NS100/180 1.4
13
6/1/00, 2:07 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Select (Continued)
Example:
Actual screen indicating ONAIR when receiving STEREO broadcasts.
Actual channel number
“← ON AIR” will appear next to STEREO or
SAP when receiving STEREO or SAP
broadcasts.
(Channel call on screen)
L
You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.
• Stereo broadcasts
Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo sound.
• SAP broadcasts
Television broadcast can be received with either MAIN or SAP sound.
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)
L
If stereo sound is difficult to hear.
• You can obtain clearer sound by manually switching to fixed monaural mode.
NOTE:
• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
• Selecting MTS while in the INPUT mode does not change the type of sound; in this case, sound is
determined by the video source.
Closed Caption
L
HOW TO SET CLOSED CAPTION
• Your TV is equipped with an internal Closed Caption decoder. “Closed
Caption” is a system which allows you to view conversations, narration,
and sound effects in TV programs and home videos as subscript on
your TV screen as shown on the right.
• Not all the programs and videos will offer closed caption. Please look
for the “
” symbol to ensure that captions will be shown.
• Closed Caption broadcast can be viewed in two modes: CAPTION
and TEXT. For each mode, two channels are available, CH1 and CH2:
VOLUME
(+)/(–)
The [CAPTION] mode subscripts dialogues and commentaries of TV
dramas and news programs while allowing clear view of the picture.
The [TEXT] mode displays over the picture other various information
(such as TV program schedule, weather forecast, etc.) that is
independent of the TV programs.
CHANNEL
UP (8)/
DOWN (9)
MENU
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “CLOSED
CAPTION”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access CLOSED CAPTION setting mode.
(CLOSED CAPTION setting mode)
14
10-18 25&27NS100/180 1.4
14
6/1/00, 2:07 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Closed Caption (Continued)
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to either
“MODE” or “DATA”.
5 Press VOL (+) or (–) to change the CLOSED CAPTION setting.
MODE :
DATA :
6 Press MENU to exit.
NOTE:
• If a broadcast has CLOSED CAPTION and the MUTE button is pressed, the set enters [CAPTION]
mode automatically. Pressing MUTE again will return the set to its previous condition.
• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor
or if there are problems at the broadcast source. This does not necessarily indicate a problem with
your set.
• If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION
broadcast, the closed captions will disappear momentarily.
• When viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen
may become dark and blank. Should this occur, set the Closed Caption mode to “OFF”.
Parent Control (V-CHIP Operation)
L V-CHIP
• This function allows you to restrict TV programs and also allows you to control TV usage based on
FCC data. This function is to prevent your children from watching violence or sexual scenes that may
be harmful.
• Restriction of TV programs includes two characters that contain information about the program’s MPAA
rating and the TV Parental Guidelines. MPAAis restricted by age. TV Parental Guidelines are restricted
by age and contents.
• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for
complete control.
[1] MPAA RATING
RATING
G
GENERAL AUDIENCES. All ages admitted.
PG
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for
children.
PG-13
PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for
children under 13.
age
base
R
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NO ONE 17 AND UNDER ADMITTED.
NC-17
X
X Rating is an older rating that is unified with NC-17 but may be encoded on
older movie’s data.Note:
15
10-18 25&27NS100/180 1.4
15
6/1/00, 2:07 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
• MPAA RATING (Example)
Example 1.
“PG-13” in the age-based RATING is blocked.
This will automatically block the high ratings “R”,
“NC-17” and “X” also.
Example 2.
“R” in the age-based RATING is blocked. This
will automatically block the high ratings “NC-
17” and “X” also.
NOTE:
• MPAA RATING is only age-based ratings.
[2] TV PARENTAL GUIDELINES
Content Base
y
x
D
L
S
V
FV
RATING
(Sexually
(Adult
(Sexual (Violence) (Fantasy
Suggestive Language) Situation)
Dialog)
Violence)
Age
TV-Y (All children)
ꢀ
ꢀ
—
—
—
—
—
—
—
—
—
TV-Y7 (Direct to
ꢀ
E
Older Children)
Age
TV-G (General
Audience)
ꢀ
ꢀ
ꢀ
ꢀ
—
ꢀ
ꢀ
—
—
ꢀ
ꢀ
ꢀ
—
ꢀ
ꢀ
ꢀ
—
ꢀ
ꢀ
ꢀ
—
—
—
—
Base
TV-PG (Parental
Guidance Suggested)
D
TV-14 (Parents
Strongly Cautioned)
TV-MA (Mature
Audience Only)
ꢀ : Content Rating can be set.
— : Content Rating can not be set (not normally broadcast by TV Station).
• TV-PARENTAL GUIDELINES (Example)
AGE
D
L
S
V
FV
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
–
–
–
ꢁ
ꢁ
–
–
–
–
ꢁ
ꢁ
ꢁ
–
–
–
ꢁ
ꢁ
ꢁ
–
–
–
ꢁ
ꢁ
ꢁ
–
ꢁ
–
–
–
ꢁ: VIEW
ꢀ: BLOCK
Example 1.1 : Age-Based setting
Go through all select ratings and select unblocked (“– – – –”)
for “AGE”. This will automatically unblock everything.
–
MENU : RETURN
16
10-18 25&27NS100/180 1.4
16
6/1/00, 2:07 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
Example 1.2 : Age-Based setting
AGE
D
L
S
V
FV
For “TV-G” select “BLOCK” for “AGE”. This will automatically
block the higher age ratings “TV-PG”, “TV-14”, “TV-MA” and
“TV-G”.
Furthermore, the content ratings “D”, “L”, “S”, “V”, “FV” are
automatically blocked as well for “TV-PG”, “TV-14” and “TV-
MA” in addition to “TV-G”.
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ꢁ
ꢁ
ꢀ
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
ꢀ
–
–
–
–
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
ꢁ
–
–
–
ꢁ: VIEW
ꢀ: BLOCK
–
MENU : RETURN
AGE
D
L
S
V
FV
Example 2.1 : Content-Based setting
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ꢁ
ꢁ
ꢁ
ꢀ
ꢀ
ꢁ
–
–
–
ꢁ
ꢁ
–
–
–
–
ꢁ
ꢁ
ꢁ
–
–
–
ꢁ
ꢁ
ꢁ
–
–
–
ꢁ
ꢁ
ꢁ
–
ꢁ
–
–
–
ꢁ: VIEW
ꢀ: BLOCK
For “TV-PG”, “TV-14” and “TV-MA” select unblocked (“– – – –”)
for each content rating but leave "AGE" blocked for “TV-PG”
and “TV-14” only.
–
MENU : RETURN
AGE
D
L
S
V
FV
Example 2.2 : Content-Based setting
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ꢁ
ꢁ
ꢁ
ꢀ
ꢀ
ꢁ
–
–
–
ꢁ
ꢁ
–
–
–
–
ꢁ
ꢁ
ꢁ
–
–
–
ꢀ
ꢀ
ꢀ
–
–
–
ꢁ
ꢁ
ꢁ
–
ꢁ
–
–
–
ꢁ: VIEW
ꢀ: BLOCK
For “TV-PG”, select "BLOCK" for only “V” (Violence).
This will automatically block the higher ratings “TV-14-V” and
“TV-MA-V” (“TV-14” and “TV-MA” for Violence content only).
Please note that with these settings, blocking does NOT
occur if a program is rated only “TV-MA”; it must be rated
“TV-MA-V” to be blocked.
–
MENU : RETURN
AGE
D
L
S
V
FV
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ꢁ
ꢁ
ꢁ
ꢀ
ꢀ
ꢀ
–
–
–
ꢁ
ꢁ
–
–
–
–
ꢀ
ꢀ
ꢀ
–
–
–
ꢁ
ꢀ
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
ꢁ
–
–
–
ꢁ: VIEW
ꢀ: BLOCK
Example 3 : Reset an Age-Based setting
For “TV-14”, select “BLOCK” for "AGE".
This will again automatically block the content ratings “D”,
“L”, “S”, “V”, “FV” for “TV-MA” in addition to “TV-14”.
Please note that the lower age rating “TV-PG” did not change
from its previous settings.
–
MENU : RETURN
NOTE:
• Content ratings can be modified but only in the combinations indicated by “ꢀ” in the table on
page 16.
• Changing a lower age-rating’s content setting to "BLOCK" automatically changes the same higher
age-rating’s content setting to “BLOCK” regardless of their previous settings.
• Changing a lower rating's “AGE” setting to “BLOCK” automatically changes all higher ratings to
“BLOCK” regardless of their previous settings.
• Any rating's "AGE" set to unblocked (“– – – –”) must have its content settings individually set.
[3] ADDITIONAL MODE
Besides the above “MPAA RATINGS” and “TV PARENTAL GUIDELINES,” new ratings systems
data can be downloaded when they become available. (See page 21.)
17
10-18 25&27NS100/180 1.4
17
6/1/00, 2:07 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
LHOW TO SET V-CHIP
REMOTE
KEYPAD
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
[1] MPAA RATING
1 Press MENU to access MAIN MENU screen.
T I MER
V I DEO AD J US T
AUD I O SE L ECT
C LOSED CAP T I ON
PARENT CONTROL
ENERGY SAVE
SE T UP
(MAIN MENU screen)
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “PARENT
CONTROL”.
3 Press VOL (+) or (–) to access PARENT CONTROL mode, then
press VOL (+) or (–) to access V-CHIP select mode.
(PARENT CONTROL mode)
4 Press VOL (+) or (–) to access “MPAA RATING”.
MPAA
T V GU I DE L I NES
DO
S T A TUS
W
N LOAD : OF F
: OF F
(V-CHIP select mode)
5 Press CH UP (8) or DOWN (9) to move the “ ” mark to "PG",
then press VOL (+) or (–) to select BLOCK. If you set “PG” to
BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically blocked.
→
6 Repeat pressing MENU to return V-CHIP select mode exit.
NOTE:
Example:
• If you set “G” to BLOCK, all RATINGS are automatically blocked.
• If you set “X” to BLOCK, “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked.
18
10-18 25&27NS100/180 1.4
18
6/1/00, 2:07 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
[2] TV GUIDELINES
1 Repeat steps 1 - 3 of [1] MPAA RATING.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “TV
GUIDELINES”.
3 Press VOL (+) or (–) to access TV GUIDELINES mode.
AGE
D
L
S
V
FV
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
ꢀ
–
–
–
ꢁ: VIEW
ꢀ: BLOCK
–
–
4 To change CONTENT SETTING, press CH UP (8) or DOWN (9)
to move the “ ” to the desired rating and then press VOL (+)
or (–) to select.
–
MENU : RETURN
(TV GUIDELINES mode)
→
TV-PG
AGE
D
L
S
5 Press CH UP (8) or DOWN (9) to move the “ ” to the desired
content and then press VOL (+) or (–) to select either “BLOCK”
or unblock (“ - - - - ”).
BLOCK
— — — —
— — — —
— — — —
— — — —
BLOCK
V
FV
→
MENU : RETURN
(CONTENT SETTING mode)
6 Press MENU to return to TV GUIDES mode.
AGE
D
L
S
V
FV
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
ꢀ
ꢁ
ꢀ
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
–
–
ꢀ
ꢀ
ꢀ
–
ꢁ
–
–
–
ꢁ: VIEW
ꢀ: BLOCK
–
–
7 Repeat steps 4 - 5 until all ratings and their contents are set.
–
MENU : RETURN
8 When done, press MENU to exit.
19
19-25 25&27NS100/180 1.4
19
6/1/00, 2:09 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
[3] ACTIVATE ON TO TURN ON V-CHIP BLOCK
1 Press CH UP (8) or DOWN (9) to move the “ ” mark to
“STATUS”, then press VOL (+) or (–) to activate the V-CHIP
BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.)
→
2 Press MENU, then “INPUT SECRET No.” will be displayed.
3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD.
4 Press MENU and SECRET No. is registered.
L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.
1 “V-CHIP HAS BEEN ACTIVATED” will be displayed if you watch
the program with Program Rating data the same as you configured.
NOTE:
• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.
2 Press MENU, then “INPUT SECRET No.” will be displayed.
3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD, then
V-CHIP BLOCK will temporarily be canceled. If the wrong SECRET
No. is chosen, “SECRET No. IS INCORRECT” will be displayed.
Input the SECRET No. again in this case.
NOTE:
• If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again.
20
19-25 25&27NS100/180 1.4
20
6/1/00, 2:09 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
L To change the V-CHIP BLOCK setting. (Secret No. is registered.)
1 Repeat steps 1 - 3 of [1] MPAA RATING, then “INPUT SECRET
No.” will be displayed.
2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD
and the V-CHIP select mode will be displayed. Repeat
configuration of the V-CHIP BLOCK.
L If you intend to change or have forgotten your Secret No., clear the original Secret No.
and set up a new one.
1 Repeat steps 1 - 3 of [1] MPAA RATING, or 1 - 2 of [ L To cancel
the V-CHIP BLOCK screen while V-CHIP BLOCK has been
activated ], then “INPUT SECRET No.” will be displayed.
2 Press and hold both VOL (+) and CH DOWN (9) on the TV set
(On the set)
VOL
CH
simultaneously until the message “INPUT SECRET No.”
+
9
8
-
disappears.
VOL(+) / CH DOWN(
)
9
3 Press MENU two times to exit.
[3]-A. Additional mode (DOWNLOAD)
There will be an additional new rating system. In that case, please set up as follows.
Subsequently the new rating system will set up automatically.
1 Repeat steps 1 - 3 of [1] MPAA RATING.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to
“DOWNLOAD”.
3 Press VOL (+) or (–) to “DOWNLOAD : ON”.
4 Repeat pressing MENU to exit.
21
19-25 25&27NS100/180 1.4
21
6/1/00, 2:09 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
LDOWNLOAD V-CHIP DATA
REMOTE
KEYPAD
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
1 If you watch the program with “New Rating System Data”,
DOWNLOAD screen will be displayed.
(DOWNLOAD screen)
2 DOWNLOAD screen will disappear, if DOWNLOAD is finished.
NOTE:
• DOWNLOAD would not be started if you don’t watch the program with “New Rating System
Data”.
[3]-B. Additional mode (Example)
1 Repeat steps 1 - 2 of [3] Additional mode.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “Cdn.
English Ratings”, then press VOL (+) or (–).
→
(After downloading the rating data)
3 You can select “BLOCK” or “– – – – –” (unblock) from each RATING
C
C8+
G
PG
14+
18+
: —————
: BLOCK
: —————
: BLOCK
: —————
: BLOCK
mode by pressing CH UP (8) or DOWN (9) and VOL (+) or (–).
I ND I V I DUAL BLOCK
MENU : RETURN
(ENGLISH INDIVIDUAL BLOCK mode)
4 You can select “BLOCK” or “– – – – –” (unblock) from each RATING
mode by pressing CH UP (8) or DOWN (9) and VOL (+) or (–)
if you select “Cdn. French Ratings” in step 2.
NOTE:
(FRENCH INDIVIDUAL BLOCK mode)
• In additional mode
Including two types (English mode, French mode), altogether you are able to download four
kinds of mode.
22
19-25 25&27NS100/180 1.4
22
6/1/00, 2:09 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (VIEW TIMER)
L
VIEW TIMER
This function allows you to restrict TV viewing time and also allows you to control TV usage.
This function is to prevent your children from watching too much TV.
VIEWING TIME (an accumulative timer: counts only the time
duration acquired while the TV is on.)
• VIEWING TIME can be set from 30M (30 minutes) to 10H00M
(10 hours) in 30 minutes intervals.
OFF TIME (Restricts TV watching after the VIEWING TIME reaches
zero.)
• OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours)
in 30 minutes intervals.
STATUS (ON/OFF setting of VIEW TIMER)
L
How to set VIEW TIMER.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “PARENT
CONTROL”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access PARENT CONTROL mode.
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to “VIEW
TIMER”.
→
(PARENT CONTROL mode)
5 Press VOL (+) or (–) to access “VIEW TIMER”.
6 Press CH UP (8) or DOWN (9) to select “VIEWING TIME” and
“OFF TIME”. For each selection, press the VOL (+) or (–) to set
the time duration.
→
7 Press CH UP (8) or DOWN (9) to select “STATUS”. Press the
VOL (+) or (–) to turn ON the “VIEWING TIMER”. (If STATUS is
OFF, VIEW TIMER is not operated)
→
8 Press MENU. “INPUT SECRET No.” will be displayed.
23
19-25 25&27NS100/180 1.4
23
6/1/00, 2:09 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (VIEW TIMER Continued)
9 Enter the 4-digit SECRET No. using the REMOTE KEYPAD.
10Press MENU, and SECRET No. is registered.
→
Example:
• To restrict anybody from watching the TV for 5 hours, after
watching the TV for 2 hours, your settings would look like this:
• They can choose to watch the 2 hours of TV however they wish.
For example, they could watch 1 hour of TV, turn TV off for 30
minutes, then turn TV on and watch the remaining 1 hour on the
VIEWING TIMER.
L
To change the VIEW TIMER settings. (SECRET No. is registered)
1 Repeat “How to set VIEW TIMER” steps and select
“PARENT CONTROL VIEW TIMER” during step
3. Press VOL (+) or (–), and “INPUT SECRET No.”
will be displayed.
2 Enter the 4-digit SECRET No. using the REMOTE
KEYPAD, and the VIEW TIMER access screen
will be displayed. Repeat step 5 - 6.
NOTE:
• When you choose the correct SECRET No., the VIEW TIMER
access screen is displayed. If the wrong SECRET No. is chosen,
“SECRET No. IS INCORRECT” is displayed. Input the SECRET
No. again in this case.
L
To cancel the VIEW TIMER (While the TV set is OFF but the
VIEW TIMER is set)
1 Turn on TV; a blue screen message “TIME OVER” will appear. If
you do nothing, the TV will turn off in approximately 30 seconds.
2 Enter the 4-digit SECRET No. using the REMOTE
KEYPAD. When you choose the correct
SECRET No., the VIEW TIMER is canceled. If
the wrong SECRET No. is chosen, “SECRET
No. IS INCORRECT” is displayed. Input the
SECRET No. again in this case.
L
To cancel the VIEW TIMER setting or change the SECRET
No. (When you forget the SECRET No.)
1 Repeat “How to set VIEW TIMER” steps and
select “PARENT CONTROL VIEW TIMER” during
step 3. Press VOL (+) or (–), and “INPUT SECRET
No.” will be displayed.
24
19-25 25&27NS100/180 1.4
24
6/1/00, 2:09 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (VIEW TIMER Continued)
(On the set)
2 Press and hold both VOL (+) and CH DOWN (9) on the TV set
simultaneously until the VIEW TIMER access screen is displayed.
Now you can cancel the VIEW TIMER settings or can change the
SECRET No. while “INPUT SECRET No.” is displayed.
VOL
CH
+
9
8
-
VOL(+) / CH DOWN(
)
9
L
Notice of Remaining VIEWING TIME
• For every 30 minute interval, the “remaining time” will be displayed
for four seconds. For the last five minutes, the “remaining time”
will be displayed every minute.
• “0 REMAIN” will be displayed for 10 seconds just before the
VIEWING TIME is completed.
Energy Save
L
This feature lets you lower the power consumption of your TV
set which in turn saves you money and minimizes the impact on
the environment. When this feature is turned on, it reduces the
brightness of the TV to a level that consumes approximately 20
percent less energy than when the feature is turned off. The
reduction in brightness will be less noticeable under low room
lighting conditions.
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “ENERGY
SAVE”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access ENERGY SAVE select mode.
(ENERGY SAVE select mode)
4 Press VOL (+) or (–) to select “ON”.
5 Press MENU to exit.
25
19-25 25&27NS100/180 1.4
25
6/1/00, 2:09 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up
REMOTE
KEYPAD
L
EZ SETUP
By operating the channel presetting functions, you can preset
your TV to the desired channels for viewing.
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET
UP”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access SET UP mode, then press
CH UP (8) or DOWN (9) to move the “ ” mark to “CH SETTING”.
→
(SET UP mode)
4 Press VOL (+) or (–) to access CH SETTING mode.
(CH SETTING mode)
5 Press VOL (+) or (–) to access EZ SETUP mode.
(EZ SETUP mode)
6 Press VOL (+).
The tuner will automatically search for the
broadcasting and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once
it has started, press VOL (–). Search will be
canceled.
To cancel EZ SETUP
Press VOL (–).
7 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
26
26-31 25&27NS100/180 1.4
26
6/1/00, 2:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up (Continued)
L
CHANNEL SETTING
If EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to
“SET UP”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access SET UP mode.
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to
“CH SETTING”.
→
(SET UP mode)
5 Press VOL (+) or (–) to access CH SETTING mode.
(CH SETTING mode)
(CH SETTING mode)
6 Press CH UP (8) or DOWN (9) to move the “ ” mark to the
“AIR/CABLE”, then press VOL (+) or (–) to access
AIR/CABLE mode.
→
7 Press CH UP (8) or DOWN (9) to move the “ ” mark to the
desired mode.
(AIR/CABLE mode)
8 Press MENU to exit.
NOTE:
• Receivable channels of your TV set are:
AIR channels: VHF: 2 through 13.
UHF: 14 through 69.
CABLE channels: 1 (HRC and IRC mode only)
2 through 125 (STD, HRC and IRC)
27
26-31 25&27NS100/180 1.4
27
6/1/00, 2:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up (Continued)
L
Saving broadcast TV channels into memory.
1.1 Press MENU to access MAIN MENU
screen, then press CH UP (8) or
DOWN (9) to move the “ ” mark to “SET
UP”.
→
→
1.2 Press VOL (+) or (–) to access SET UP
mode, then press CH UP (8) or
DOWN (9) to move the “ ” mark to “CH
SETTING”.
(CH SETTING mode)
1.3 Press VOL (+) or (–) to access CH
SETTING mode.
1.4 Press CH UP (8) or DOWN (9) to move
the “ ” mark to “CH SEARCH”, then press
VOL (+) or (–) to access CH SEARCH
mode.
→
(START)
START
2.1 Press VOL (+). The tuner will search
through all available channels in your area
and add them into the TV’s memory.
STOP
(STOP)
2.2 Press VOL (–). CH SEARCH will stop at
the current channel and will not add any
higher channels.
(CH SEARCH mode)
2.3 Press MENU to exit.
L
Adding weak or additional channels or erasing unwanted channels from TV memory.
1.1 Press MENU to access MAIN MENU
screen, then press CH UP (8) or
DOWN (9) to move the “ ” mark to “SET
UP”.
→
1.2 Press VOL (+) or (–) to access SET UP
mode, then press CH UP (8) or
DOWN (9) to move the “ ” mark to “CH
SETTING”.
→
(CH SETTING mode)
1.3 Press VOL (+) or (–) to access CH
SETTING mode, then press CH UP (8) or
DOWN (9) to move the “ ” mark to “CH
MEMORY”.
→
28
26-31 25&27NS100/180 1.4
28
6/1/00, 2:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up (Continued)
2.1 Press VOL (+) or (–) to access CH
MEMORY.
2.2 Use CH UP (8) or DOWN (9) or REMOTE
KEYPAD to select each desired channel
to add or erase.
or
2.3 Press VOL (+) to add a channel to the TV’s
memory or press VOL (–) to erase a
channel from the TV’s memory.
2.4 Press MENU to exit.
VOLUME
(+)/(–)
VOL (+)
To add channel 12 to the
TV memory
CHANNEL
UP (8)/
DOWN (9)
MENU
VOL (–)
To erase channel 12 from
the TV memory
(CH MEMORY
unmemorized channel)
(CH MEMORY
memorized channel)
NOTE:
• If you press VOL (+) again while in the CH SEARCH mode, auto-program will start again, and the
previously memorized channels will be lost.
L
BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not received.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to
“SET UP”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access SET UP mode.
(SET UP mode)
4 Press VOL (+) or (–) to access BLUE SCREEN select mode.
(BLUE SCREEN select mode)
5 Press VOL (+) or (–) to select “ON”.
29
26-31 25&27NS100/180 1.4
29
6/1/00, 2:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up (Continued)
6 Press MENU to exit.
NOTE:
• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch
the BLUE SCREEN “OFF”.
• While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if the
BLUE SCREEN is turned on.
L
PERSONAL PREFERENCE
By setting the PERSONAL PREFERENCE channels in advance,
you can select your favorite channels easily.
REMOTE
KEYPAD
VOLUME
(+)/(–)
PERSONAL
PREFERENCE
CHANNEL
UP (8)/
DOWN (9)
MENU
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to
“SET UP”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access SETUP mode, then press
CH UP (8) or DOWN (9) to move the “ ” mark to “PERSONAL
PREFERENCE”.
→
(SETUP mode)
4 Press VOL (+) or (–) to select PERSONAL PREFERENCE select
mode in which you can program four favorite channels, in four
different categories. (total of 16 channels)
(PERSONAL PREFERENCE select mode)
5 Press CH UP (8) or DOWN (9) to move the “ ” mark to the
desired position.
6 Press REMOTE KEYPAD on the Remote to input the CHANNEL
Number into the memory.
Example:
125 — Press “100” followed by “2” and then “5”.
7 Repeat steps 4 - 6 to input the next CHANNEL Number.
30
26-31 25&27NS100/180 1.4
30
6/1/00, 2:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up (Continued)
8 Press MENU to exit.
L
To select the PERSONAL PREFERENCE channel.
If the channels are memorized as shown to the right,
press the Remote’s “A” button to select the Channels below.
VOLUME
L
UNIVERSAL PLUS FUNCTION
VCR input mode will be selected automatically by pressing VCR
PLAY button on UNIVERSAL REMOTE CONTROL.
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to
“SET UP”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access SET UP mode.
(SET UP mode)
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to
“UNIVERSAL PLUS”.
5 Press VOL (+) or (–) to access UNIVERSAL PLUS select mode.
(UNIVERSAL PLUS select mode)
6 Press CH UP (8) or DOWN (9) to select the “CH3”, “CH4”,
“INPUT 1”, “INPUT 2” or “OFF”.
Set model to the input in which your VCR is connected.
If done through RF, select either channel 3 or 4 to match
the setting of the VCR.
7 Press MENU to exit.
31
26-31 25&27NS100/180 1.4
31
6/1/00, 2:11 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Video and Audio Input Jacks
L
Connecting video equipment for playback of video material.
• When the television is connected to video equipment as shown below, the material being played
back on the video equipment can be seen on the television screen.
Connecting video device equipped with video output terminal.
CONNECTIONS
VIDEO EQUIPMENT
(Front connection
terminals of TV)
VIDEO
L
AUDIO
R
To VIDEO
OUTPUT
Camcorder
To AUDIO OUTPUT (L)
To AUDIO OUTPUT (R)
(Rear connection
terminals of TV)
To VIDEO
OUTPUT
TV Game
To AUDIO OUTPUT (R)
To AUDIO OUTPUT (L)
VCR
Notes:
• The S-VIDEO INPUT terminals (IN-1) are used to obtain a higher
quality image by importing image signal separated into color and
brightness signals.
• The S-VIDEO INPUT terminal is for image signal. Audio signal is to
be connected to the IN 1 AUDIO terminals (left and right).
(Rear connection
terminals of TV)
To S-VIDEO OUTPUT (When your
video equipment has an S-VIDEO
output terminal)
VCR
To VIDEO OUTPUT
To AUDIO OUTPUT (R)
To AUDIO OUTPUT (L)
32
32-40 25&27NS100/180 1.4
32
6/1/00, 2:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Video and Audio Input Jacks (Continued)
L
To watch video material playback.
• Press the Remote’s INPUT to select VIDEO INPUT mode to which the video equipment you want to
playback is connected.
• The external VIDEO INPUT mode will change as follows each
time the INPUT is pressed.
• INPUT mode can be selected by pressing either the CH UP (8) on the TV remote control when the
TV is set to the highest channel stored in memory, or by pressing the CH DOWN (9) when it is set to
the lowest channel.
NOTE:
• When connecting video or audio equipment to the television, be sure that the power is turned off in
order to prevent damage to either the television or the equipment being connected.
• The S-VIDEO terminal has priority over a VIDEO terminal (IN-1). When you want to watch pictures
from video equipment connected to a VIDEO terminal, unplug equipment connected to the
corresponding S-VIDEO terminal.
• It is the intent of SHARP that this product be used in full compliance with the copyright law and that
prior permission be obtained from copyright owners whenever necessary.
• For detailed information on the connection and use of auxiliary equipment, refer to the instruction
manuals of the equipment being used.
• The connection cords can be obtained from your local video store.
Using the Audio Output Jacks (25N-S180 and 27N-S180 only)
L
These jacks are used for connecting a standard stereo amplifier. Control of STEREO/MONO/
SAP, VOLUME and MUTE are retained at the TV. These jacks relay the audio signal of all
programs being displayed on the TV screen.
(1) Before connecting the
cord, turn on the TV and
adjust the VOLUME
control on the TV for a
moderate listening level.
(2) Turn off the TV and
connect the audio cord to
theAUDIO LINE OUTPUT
JACKS on the TV.
(AUDIO OUTPUT JACKS are located on the rear of the cabinet.)
CONNECTIONS
(Rear connection
terminals of TV)
(3) Turn the TV set and stereo
amplifier on.
(4) If you desire, you can
turn off the sound to the
TV’s internal speakers by
SPEAKER mode. See
page 13 - 14.
(5) Adjust the VOLUME
control on the stereo
amplifier for a moderate
listening level.
(6) Control of the audio can be done using the audio controls (STEREO/MONO/SAP, VOLUME, and
MUTE), from either the remote control, or directly from the TV set.
NOTE:
• For detailed information on the connection and use of auxiliary equipment, refer to the operation
manuals of the equipment being used.
• When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio
connection cord and plug adapter as shown below.
• For optimal sound quality, it is recommended to keep the TV’s audio output level high.
Plug adapter
To the equipment
To the TV
being connected
Pin plug Pin jack/Mini plug
Pin plug x 2
33
32-40 25&27NS100/180 1.4
33
6/1/00, 2:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of Remote Control
L
“ Identifying” Remote VCR and Cable TV
Converters
L
Universal Remote Control
With the purchase of your television set you
also have received the latest innovation in
remote control technology. With its easy-to-
use push-button keypad, your Remote can
control your television set and most infrared
remote-controlled VCRs and cable TV
converters as well.
Your Remote Control has been set at the
factory to operate your TV and many remote
control VCRs and Cable Converters. However,
in some cases an easy one-time set-up step
may be necessary before the Remote will
operate accessory VCRs and Cable
Converters.
• In this set-up step, the Remote locates and
memorizes the remote control transmitter code
for the VCR or Cable Converter.
• Once “identified”, the Remote sends the proper
remote signals to operate your accessory.
• This identify step will not have to be repeated
until power to the Remote is interrupted due
to a battery failure.
NOTE:
• Depending on the model, year produced,
brand and type of VCR, some models may
not be compatible with the remote control.
• Some brands of VCR or Cable TV converter
Box may not enable channel selection until
the ENTER is pressed.
Example:
When you select channel 24,
(1) Press REMOTE KEYPAD “2”.
(2) Press REMOTE KEYPAD “4”.
(3) Press ENTER.
For detailed information on the use of the VCR
or Cable TV converter Box refer to their
operating manuals.
L
Using Your Remote Control With a VCR
Once you make certain the Remote Control
has “identified” your remote controlled VCR,
the Remote Control is ready to operate your
unit. The various VCR function buttons on the
Remote Control will not operate your VCR
if those features are not already found on
your unit.
• All VCR buttons will operate whether the
Remote Control is in TV or CATV modes.
• For detailed information on the use of the VCR,
refer to the operation manual of the VCR.
L
Using Your Remote With Your TV
After installing the batteries, set the TV-CATV
on the remote to the TV position. (If you can
change the channel of the TV by pressing
CH UP (8) or DOWN (9) on the Remote
Control, it is in the TV position.)
VCR POWER
REMOTE KEYPAD
Press to turn the VCR on
and off.
Use to enter two-digit code
numbers when identifying your
VCR.
POWER
TV
VCR
DISPLAY
INPUT
PLAY
1
4
2
5
8
0
3
6
9
Press to playback a tape.
ENTER
REWIND
FF
7
FLASHBACK
ENTER
Press to rewind a tape.
For some VCRs you may
need to press STOP first,
then REWIND.
In Playback mode, hold
button down to view picture
moving rapidly in reverse.
Press to rapidly advance the
tape. For some VCRs, you may
need to press STOP first, then
FF.
In Playback mode, hold button
down to view the picture moving
rapidly in forward direction.
100
PERSONAL PREFERENCE
A
B
C
D
CH
CH
VOL
VOL
+
MENU
MUTE
CATV
TV
PAUSE
VCR CHANNEL
Press to temporarily stop
the tape during playback
or recording. Press again
to release Pause.
UP ( ) / DOWN (
Press to scan up or down through
channels on the VCR.
)
REW
PLAY
FF
VCR CH
PAUSE STOP
REC
RECORD
STOP
Press to begin recording.
Press to stop the tape.
TV ¥ VCR ¥ CATV
34
32-40 25&27NS100/180 1.4
34
6/1/00, 2:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of Remote Control (Continued)
VCR
POWER
DISPLAY
REMOTE
KEYPAD
CHANNEL
UP (8)/
DOWN (9)
TV-CATV
L
HOW TO IDENTIFY A VCR
Some brands have more than one remote
The remote control may already be set to
operate your VCR. Try this initial check to see
if going on to the following “identify” section is
necessary.
code listed due to changes in the remote
codes from early to later model years, or due
to format differences (VHS/BETA). In such
cases, you may have to try more than one code
to find the code your VCR accepts.
(1) Point remote towards VCR and press VCR
POWER.
(2) Does the remote turn the VCR ON and OFF?
• If yes, the remote is ready to operate the VCR
and no further steps are needed.
NOTE:
Depending on the model, year produced,
brand, and type of VCR, some models may
not be compatible with the remote control.
• If no, continue to the “identify” section.
L
To Identify Your VCR – Direct Entry Method.
L
To Identify Your VCR – Search Method.
Use the following steps and list to quickly find
the remote control code for your accessory
VCR.
• First look up your VCR’s remote control code
number before going through the direct code
entry steps control.
• If this procedure does not identify your
accessory VCR, use the Search method of
identification (described in the next section).
(1) Slide TV-CATV switch on the remote to TV.
(2) Press POWER on the VCR to ON.
(3) Stand at least six feet away from the front of
the VCR.
Point the remote towards the VCR.
Hold down DISPLAY and CH UP (8) at the
same time. KEEP HOLDING THE BUTTONS
DOWN.
(4) Watch the Channel Number indicator on the
VCR, Channel numbers will scan up when the
VCR has been identified.
(1) Slide TV-CATV switch to TV.
(2) Press and hold down DISPLAY and
CH DOWN (9) on your remote control.
Then release both buttons.
Release DISPLAY and CH UP (8) as soon
as the channel numbers start to scan up.
The VCR’s remote control code number has
been identified, and the remote is ready to
operate the VCR.
(3) Within ten seconds after releasing DISPLAY
and CH DOWN (9), enter your VCR’s two-
digit remote control code number using
REMOTE KEYPAD (refer to list).
• The remote control is now ready to send
commands to your VCR.
35
32-40 25&27NS100/180 1.4
35
6/1/00, 2:12 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of Remote Control (Continued)
REMOTE CONTROL
CODE NUMBER
VCR BRAND
Akai________________ 25, 26, 37
Audio Dynamics ______ 15, 22, 30
Broksonic ___________ 32
TV
POWER
DISPLAY
Canon ______________ 04
Capehart ____________ 34
Craig _______________ 10, 31
Curtis Mathis_________ 04
REMOTE
KEYPAD
Daewoo ____________ 34
DBX _______________ 15, 22, 30
Dynatech ___________ 29
Emerson ____________ 21, 32, 35
Fisher ______________ 09, 10, 11
Funai _______________ 28, 29
GE ________________ 04
CHANNEL
UP (8)/
DOWN (9)
Goldstar ____________ 24
TV-CATV
Hitachi______________ 06
Instant Replay________ 04
JC Penney __________ 04, 06, 24, 30
JVC ________________ 15, 41, 42
Kenwood ____________ 14, 15
Lloyds ______________ 29
Magnavox ___________ 04, 05, 08
Magnin _____________ 31
Marantz_____________ 30
Memorex ____________ 04, 10, 24, 29
Minolta _____________ 06
Mitsubishi ___________ 17, 18, 39, 40
Montgomery Ward ____ 02, 43
Multitech ____________ 29
NEC _______________ 15, 22, 30
Panasonic ___________ 04, 44
Pentax _____________ 05, 06
Philco ______________ 04, 05
Philips ______________ 04, 05, 08
Quasar _____________ 04
RCA _______________ 06, 07, 33
Realistic ____________ 01, 02, 10, 24
Samsung ___________ 23, 31
Sanyo ______________ 14, 10
Scott _______________ 20
Sears ______________ 06, 11, 24
Sharp ______________ 01, 02, 03
Shintom ____________ 36
Sony _______________ 12, 13, 38
Sound Design ________ 29
TIPS ON IDENTIFYING YOUR VCR:
If your VCR model does not have the CHANNEL
UP function on its remote control, it cannot be
identified using the SEARCH method of identifying.
For such models, please try the DIRECT ENTRY
method of identifying.
Be Patient: a minute or two can seem a lot longer
when you’re waiting for something to happen, but
the code should be identified within two minutes.
Remember, it is only a one-time set-up.
Be careful not to let the VCR scan more than five
channels when the indicator starts to move up.
If you continue holding down the DISPLAY and
CH UP (8) after five channel scans, the proper
remote code can be passed up, and the two minute
identify cycle will have to be repeated.
If a channel change does not occur on the VCR
within two minutes, read the identifying instructions
again and repeat the steps. Should a channel
change still not occur the remote will not operate
with the desired VCR.
L
L
HOW TO IDENTIFY A CABLE CONVERTER
To Identify Your Cable Converter – Direct
Entry Method.
Sylvania ____________ 04, 05, 08
Symphonic __________ 29
Tatung ______________ 15
Teac _______________ 15, 29
Teknika _____________ 27, 29
Thomas_____________ 29
Use the following steps and list to quickly find
the remote control code for your cable TV
converter.
• First look up your converter’s remote code
number before going through the direct code
entry steps below.
TMK _______________ 21
Toshiba _____________ 19, 20
Video Concepts ______ 30
• If this procedure does not identify your
converter, use the Search method of
identification (described in the next section).
Yamaha ____________ 15, 29, 30
Zenith ______________ 16
36
32-40 25&27NS100/180 1.4
36
6/1/00, 2:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of Remote Control (Continued)
(1) Slide TV-CATV switch to CATV.
REMOTE CONTROL
CODE NUMBER
(2) Press and hold down DISPLAY and
CH DOWN (9) on your remote control.
Then release both buttons.
CATV CONVERTER
BRAND
Anvision ____________ 07, 08
Cable Star___________ 07, 08
Eagle ______________ 08
Eastern International __ 02
General Instrument ____ 04, 05, 15, 23, 24, 25,
30, 36
Hamlin _____________ 12, 13, 34
Jerrold ______________ 04, 05, 15, 23, 24, 25,
30, 36
(3) Within ten seconds after releasing DISPLAY
and CH DOWN (9), enter your converter’s two-
digit code number using REMOTE KEYPAD
(refer to list).
• The remote control is now ready to send
commands to your converter.
• Some brands have more than one remote code
listed due to changes in the remote codes from
early to later model years. In such cases, you
may have to try more than one code to find the
code your converter accepts.
Macom _____________ 37
Magnavox ___________ 07, 08, 19, 25, 28, 29,
32, 33, 40, 41
NSC _______________ 09
Oak ________________ 01, 16, 38
NOTE:
Depending on the model, year produced, brand,
and type of CATV converter, some models may
not be compatible with the remote control.
18
Oak Sigma __________
Panasonic ___________ 27, 39
Philips ______________ 07, 08, 19, 26, 28, 29,
32, 33, 40, 41
Pioneer _____________ 18, 20
Randtek ____________ 07, 08
L
To Identify Your Cable Converter – Search
Method.
(1) SlideTV-CATV switch on the remote to CATV.
(2) Press the POWER button on the cable
converter to ON.
(3) Stand at least six feet away from the converter.
Point the remote towards the converter.
Hold down the DISPLAY and CH UP (8) at
the same time. KEEP HOLDING THE
BUTTONS DOWN.
27, 43
RCA _______________
Regal ______________ 12, 13
Regency ____________ 02
03, 22, 42
Sony _______________ 44
Sylvania ____________ 11
Scientific Atlantic______
06
Teknika _____________
Texscan ____________ 11
Tocom ______________ 17, 21
(4) Watch the Channel Number indicator on the
converter.
31
Unika ______________
Viewstar ____________ 07, 08, 19, 26, 28, 29,
32, 33, 40, 41
Channel numbers will scan up when the
converter has been identified.
Release the DISPLAY and CH UP (8) as soon
as the channel numbers start to scan up.
The converter’s remote control code number
has been identified, and the remote is ready to
operate the converter.
14
Zenith ______________
NOTE:
Some satellite receivers can be operated by the
REMOTE CONTROL. If you have a Satellite
Receiver, you can use the above method to search
for available channels.
TIPS ON IDENTIFYING YOUR CABLE
CONVERTER:
Be Patient: a minute or two can seem a lot
longer when you’re waiting for something to
happen, but the code should be identified
within two minutes. Remember, it is only a
one-time set-up.
Be careful not to let the CATV converter scan
more than five channels when the indicator
starts to move up. If you continue holding down
the DISPLAY and CH UP (8) after five channel
scans, the proper remote code can be passed
up, and the two minute identify cycle will have
to be repeated.
If a channel change does not occur on the cable
converter within two minutes, read the
identifying instructions again and repeat the
steps. Should a channel change still not occur,
the remote will not operate with the desired
converter.
37
32-40 25&27NS100/180 1.4
37
6/1/00, 2:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Calling for Service
Check these items and see if you can correct trouble with a slight adjustment of the controls.
QUICK SERVICE
CHECK LIST
POSSIBLE REMEDY
Try a new channel, if OK, then possible
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
station trouble.
X
X
X
Is TV plugged in? Power at outlet?
Is TV’s POWER button on?
Is antenna connected to terminal on the
back of the set?
X
X
X
X
If outside antenna is being used, check
for broken wire.
X
X
X
X
X
X
X
X
X
X
X
X
X
Check for local interference or external
electrical noise.
X
X
X
Turn off with POWER button and then
turn it on after about a minute.
X
X
X
X
Adjust COLOR control.
Adjust PICTURE control.
X
X
X
Check external Video/Audio products:
look for loose/broken connection leads.
(Refer to page 32)
X
X
X
X
Check batteries of Remote Control.
Press CATV/TV Select Switch to TV
position.
Are audio cables connected firmly?
Check the volume level.
X
X
Is SPEAKER ON? See page 13.
Change Closed Caption mode to
X
X
“OFF”/ Energy Save mode to “OFF”.
Unplug the TV and plug it in again after
two minutes.
X
X
X
X
X
X
X
X
X
NOTE:
• When viewing in TEXT mode, if no TEXT broadcast is being received,
the screen may become dark and blank. Should this occur, set the
Closed Caption mode to “OFF”.
(Dark and Blank Picture)
Calling for Service
For location of the nearest SharpAuthorized Servicers, or to obtain product literature accessories, supplies,
or customer assistance, please call 1-800-BE-SHARP.
38
32-40 25&27NS100/180 1.4
38
6/1/00, 2:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Antes de llamar al servicio de reparaciones
Verifique estos items para ver si usted mismo puede solucionar el problema.
LISTA DE
COMPROBACIONES
DE SERVICIO
RAPIDO
POSIBLE SOLUCIÓN
Pruebe con otro canal y si todo está bien,
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
el problema puede ser de la emisora.
Está conectado el televisor? Llega
electricidad al tomacorrientes?
X
X
X
Está conectado el interruptor del televisor?
Está conectado la antena al terminal del
panel posterior del televisor?
X
X
X
X
X
X
X
X
X
X
X
X
X
Si utiliza una antena exterior, cerciórese
de que el cable no esté dañado.
X
X
X
X
X
X
X
X
X
Compruebe si hay interferencia local.
Desconecte el interruptor POWER y
vuelva a conectarlo después de transcurrir
un minuto.
X
X
X
X
X
Ajuste el control de COLOR.
Ajuste el control de MATIZ.
X
X
X
Verifique los productos externos de Video/
Audio, revise si hay gufas de conexiones
sueltas o rotas.
X
Compruebe el estado de las pilas del
mando a distancia.
X
X
Pulse CATV/TV selector para situarlo
sobre la posición TV.
Están bien conectados los cables de
X
X
sonido? Compruebe el nivel del volumen.
Está conectado el altavoz?
Desactive (OFF) el modo CLOSED
CAPTION / Desactive (OFF) el modo
Ahorro de Energía (Energy Save).
X
X
Desenchufe el televisor y vuelva a
enchufarlo despúes de dos minutos.
X
X
X
X
X
X
X
X
X
NOTA:
• Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la pantalla
puede ponerse en blanco y negro. Si ocurriera ésto, ponga el modo CLOSED
CAPTION en OFF.
(Imagen oscura y en blanco)
39
32-40 25&27NS100/180 1.4
39
6/1/00, 2:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product
(the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and
agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or
remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth
below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper
voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and
provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by
law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do
not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of
Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole
and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time
described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser
with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence,
strict liability or otherwise. In no event shall Sharp be liable or in any way responsible, for any damages or defects in
the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized
servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property
damage. Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion
may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH
VARY FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
25N-S100/25N-S180, 25 inch Color Television
27N-S100/27N-S180, 27 inch Color Television
(Be sure to have this information available when you need service
for your Product.)
Warranty Period for this Product:
One (1) year parts and 90 days labor for 25 inch models; one (1)
year parts and one (1) year labor for 27, 32, and 36 inch models.
The warranty period continues for an additional one (1) year, for
a total of two (2) years, with respect to the picture tube(s) in the
Product for parts only. Labor and service are not provided free
of charge for this additional period.
Additional Item(s) Excluded from
Warranty Coverage (if any):
Non-rechargeable batteries.
Where to Obtain Service:
From a Sharp Authorized Servicer located in the United States.
To find the location of the nearest Sharp Authorized Servicer,
call Sharp toll free at 1-800-BE-SHARP.
What to Do to Obtain Service:
Contact your SharpAuthorized Servicer to obtain in-home service
for this Product. The Servicer will come to your home and if it is
necessary to remove the Product, the Servicer will reinstall it.
Be sure to have Proof of Purchase available.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
Printed in U.S.A.
TINS-6930MEN1
T2384-A (T2384-A)
40
32-40 25&27NS100/180 1.4
40
6/1/00, 2:13 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|