Sharp CRT Television 20F640 User Manual
COLOR TELEVISION  
MODEL  
20F640  
L OPERATION MANUAL L  
CONTENTS  
PAGE  
PAGE  
•
•
Closed Caption ...................................................... 17  
Parental Control ............................................. 18 ~ 28  
V-CHIP ........................................................ 18 ~ 25  
View Timer .................................................. 26 ~ 28  
Ch Setup ........................................................ 29 ~ 34  
EZ Setup ............................................................. 29  
Channel Setting .......................................... 30 ~ 32  
Personal Preference ........................................... 33  
Universal Plus Function ...................................... 34  
Set Up ............................................................ 35 ~ 36  
Energy Save ....................................................... 35  
Blue Screen ........................................................ 36  
Using the Video and Audio Input Jacks ......... 37 ~ 38  
Using the Audio Output Jacks ............................... 39  
Operation of Remote Control ......................... 40 ~ 44  
Before Calling for Service ...................................... 45  
Calling for Service ................................................. 45  
Specifications ........................................................ 46  
Limited Warranty .................................................... 60  
•
IMPORTANT INFORMATION/IMPORTANT  
SAFEGUARDS .................................................. 2 ~ 4  
Supplied Accessories .............................................. 5  
Before Operating Your Television ............................. 5  
Antenna Connections ........................................ 5 ~ 6  
Quick Reference Control Operation ................... 7 ~ 8  
EZ SETUP during First Use..................................... 9  
Demo Mode ........................................................... 10  
Accessing the MAIN MENU screen without  
Remote Control...................................................... 10  
Language ............................................................... 11  
Sleep Timer ........................................................... 12  
Video Adjust .......................................................... 13  
Audio Adjust........................................................... 14  
Audio Select................................................... 15 ~ 16  
MTS (Multichannel TV Sound) ............................ 15  
INTERNAL SPEAKER SWITCH ......................... 15  
FAO (Fixed Audio Output) ................................... 15  
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
This operating manual includes basic operating  
instructions in Spanish and French.  
SPANISH is on page 47 ~ 52.  
FRENCH is on page 53 ~ 58.  
B177 WJ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT INFORMATION (Continued)  
CAUTION:  
• Do not place the AC power cord under the TV set or other heavy items.  
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.  
• To prevent fire or shock hazard, do not expose this products to dripping or splashing. No objects filled with  
liquids, such as vases, should be placed on the product.  
IMPORTANT SAFEGUARDS  
CAUTION:  
Please read all of these instructions before you operate your television and save  
these instructions for later use.  
Electrical energy can perform many useful functions.This unit has been engineered and manufactured to assure  
your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE  
HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic  
rules for its installation, use and servicing.  
1. Unplug this television equipment from the wall outlet before cleaning.  
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.  
3. Do not use attachments not recommended by the television equipment manufacturer as they may cause  
hazards.  
4. Do not use this television equipment near water — for example, near a bath tub, washbowl, kitchen sink or  
laundry tub, in a wet basement, or near a swimming pool, etc.  
5. Do not place this equipment on an unstable cart, stand, or table.The television equipment may fall, causing  
serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand  
recommended by the manufacturer or sold with the television equipment.  
6. Television equipment and cart combination should be moved with care. Quick stops,  
excessive force, and uneven surfaces may cause the equipment and cart combination to  
overturn.  
7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a  
mounting kit approved by the manufacturer.  
8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To  
insure reliable operation of the television equipment and to protect it from overheating, these openings must  
not be blocked or covered. This television equipment should not be placed in a built-in insulation such as a  
bookcase unless proper ventilation is provided.  
9. The openings should never be covered with a cloth or other material, and the bottom openings should not  
be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television  
equipment should never be placed near or over a radiator or heat register.  
10. This television equipment should be operated only from the type of power source indicated on the marking  
label. If you are not sure of the type of power supplied to your home, consult your television dealer or local  
power company.  
For television equipment designed to operate from battery power, refer to the operating instructions.  
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger  
than the other). The 2-wire polarized plug will fit only one way into the power outlet.  
If the plug does not fit, ask your electrician to replace your obsolete outlet.Do not modify the plug and defeat  
this safety feature.  
12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will  
be abused by persons walking on it.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS (Continued)  
13. Follow all warnings and instructions marked on the television equipment.  
14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded  
so as to provide some protection against voltage surges and built-up static charges. Section 810 of the  
National Electrical Code provides information with respect to proper grounding of the mast and  
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding  
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements  
for the grounding electrode.  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NATIONAL ELECTRICAL CODE  
ANTENNA  
LEAD IN  
WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
NEC—NATIONAL ELECTRICAL CODE  
15. For added protection for this television equipment during a lightning storm, or when it is left unattended and  
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent  
damage to the equipment due to lightning and power-line surges.  
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside  
antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact  
with them might be fatal.  
17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.  
18. Never push objects of any kind into this television equipment through cabinet slots as they may touch  
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid  
of any kind on the television equipment.  
19. Do not attempt to service this television equipment yourself as opening or removing covers may expose you  
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.  
20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel  
under the following conditions:  
A. When the power cord or plug is damaged or frayed.  
B. If liquid has been spilled into the television equipment.  
C. If the television equipment has been exposed to rain or water.  
D. If the television equipment does not operate normally by following the operating instructions. Adjust  
only those controls that are covered by the operating instructions as improper adjustment of other  
controls may result in damage and will often require extensive work by a qualified technician to  
restore the television equipment to normal operation.  
E. If the television equipment has been dropped or the cabinet has been damaged.  
F. When the television equipment exhibits a distinct change in performance — this indicates a need for  
service.  
21. Upon completion of any service or repairs to this television equipment, ask the service technician to  
perform routine safety checks to determine that the television is in safe operating condition.  
22. When replacement parts are required, be sure the service technician has used replacement parts  
specified by the manufacturer that have the same characteristics as the original part. Unauthorized  
substitutions may result in fire, electric shock, or other hazards.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Supplied Accessories  
Infrared Remote Control/Part Number  
RRMCGA108WJSA  
Dry batteries size “AA”/  
1.5 V cc  
Before OperatingYour Television  
Location  
• For normal operation, yourTV should be located in an area of the room where cool adequate ventilation  
is provided. Do not place the back of the television set in a place where free airflow will be restricted.  
• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys  
using magnets or any other magnetic substance, such as iron are kept well away from the TV set.  
Power  
Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you  
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an  
electrician. Do not defeat the safety feature of the polarized plug.  
Note:  
• If the set will not be used for a long period, such as during a vacation, unplug the set from the wall  
outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the  
POWER BUTTON in the OFF position.)  
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located  
near the TV and both radio and TV broadcasts are being received. Should such noise appear, turn  
off either the TV or the radio.  
• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received  
due to interference from the TV.  
L
Before using the television, prepare the Remote Control  
To use the remote control, insert batteries first.  
Insert the batteries  
Baterry  
Cover  
Pull up  
•
With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert two batteries  
(size“AA”/1.5V cc).Be sure to match the battery terminals with the marks inside the compartment.  
e/d  
e/d  
Antenna Connections  
Antennas  
• The antenna requirements for good color television reception are more important than those for black  
& white television reception.For this reason, a good quality outdoor antenna is strongly recommended.  
The following is a brief explanation of the type of connections that are provided with the various  
antenna systems:  
1. A 75 ohm system is generally a round cable with F-type  
connector that can easily be attached to a terminal without  
tools (not supplied).  
F-type connector  
75-ohm coaxial cable (round)  
300-ohm twin-lead cable (flat)  
2. A 300 ohm system is a flat “twin-lead” cable that can be  
attached to a 75 ohm terminal through a 300-75 ohm  
ADAPTOR (not supplied).  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Antenna Connections (Continued)  
OUTDOOR ANTENNA CONNECTION  
• Use one of the following two diagrams if you connect an outdoor antenna.  
A: Using a VHF/UHF combination outdoor antenna.  
B: Using separate VHF and/or UHF outdoor antenna.  
• Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of  
the TV set.  
A. Combination VHF/UHF Antennas  
B. Separate VHF/UHF Antenna  
REAR OF TV  
VHF/UHF ANTENNA  
300/75-ohm  
ADAPTOR  
VHF/UHF ANTENNA  
or  
(Not supplied)  
300-ohm  
twin-lead  
VHF  
UHF  
ANTENNA ANTENNA  
300-ohm  
twin-lead  
IN  
1
COMPONENT  
LINE  
OUT  
Y
R
A
U
DIO  
P
B
R
L
R
L
P
V
IDEO  
75-ohm  
coaxial cable  
COMBINER  
(not supplied)  
300-ohm  
twin-lead  
IN OUT  
IN  
1
COMPONENT  
LINE  
OUT  
Y
PB  
PR  
R
75-ohm coaxial  
cable  
A
U
DIO  
L
R
L
or  
V
IDEO  
REAR OF TV  
NOTICE  
F-type connector  
F-type connector should be finger tightened only  
When connecting the RF cable to theTV set, do not tighten  
F-type connector with tools.  
If tools are used, it may cause damage to your TV set.  
(The breaking of Internal circuit, etc.)  
75-ohm coaxial cable  
CABLE TV (CATV) CONNECTION  
• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm  
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.  
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay  
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by  
the cable TV company.This converter/descrambler is necessary for normal viewing of the scrambled  
channels. (Set your TV on channel 3 or 4.Typically one of these channels is used. If this is unknown,  
consult your cable TV company.) For more specific instructions on installing cable TV, consult your  
cable TV company. One possible method of utilizing the converter/descrambler provided by your  
cable TV company is explained below.  
Please note: RF switch equipped with position A/B (not provided) is required.  
“A” position on the RF switch (not supplied): You can view all unscrambled channels using theTV’s  
channel keys.  
“B” position on the RF switch (not supplied):  
You can view the scrambled channels via the converter/  
descrambler using the converter’s channel keys.  
RF switch (not supplied)  
Two-set  
signal  
splitter  
(not  
supplied)  
A
OUT  
IN  
B
Cable TV Line  
OUT  
IN  
Cable TV converter/  
descrambler  
(not supplied)  
Note:  
•
Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Reference Control Operation  
Part Names  
Front Panel  
•
POWER  
Press → On.  
INSIDE DOOR  
Press again → Off.  
VIDEO/AUDIO  
TERMINALS  
IN 2  
REMOTE CONTROL  
SENSOR  
MENU  
CHANNEL UP/DOWN  
(a) Selects next higher channel.  
(s) Selects next lower channel.  
VOLUME UP/DOWN  
(k) Increases sound.  
(l) Decreases sound.  
Press → Accesses MAIN MENU.  
Press again → Exits MAIN MENU.  
To open the door  
Using the projection located under the "PULL-OPEN" indication,  
pull and lift the door open.  
To close the door  
Using the projection, lower the door until closed.  
Caution:  
• When opening or closing the door, do not insert your fingers into  
the gap between the door and front panel. This may result in an  
injury.  
Rear Panel  
IN  
1
C
O
MP  
O
N
E
NT  
L
INE  
T
Y
R
U
L
O
U
A
D
I
O
P
P
B
R
R
L
V
I
D
E
IN  
1
C
OMP ONE NT  
L INE  
OUT  
Y
R
A
UDIO  
L
P
P
B
R
R
L
V
IDE  
O
LINE OUT (AUDIO) TERMINALS  
ANTENNA/CABLE INPUT  
TERMINAL  
IN 1 (VIDEO/AUDIO) TERMINALS  
COMPONENT (VIDEO) TERMINALS  
Note:  
• The TV set and remote control illustrations and the on-screen displays in this manual may differ from their actual  
appearance.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Reference Control Operation (Continued)  
Part Names  
Basic Remote Control Functions  
•
Infrared Transmitter Window  
POWER  
Press → On.  
CATV/DVD-TV/VCR MODE buttons  
Press TV/VCR → Signals sent will be for  
TV and VCR control.  
Press CATV/DVD → Signals sent will be  
for cable TV converter and DVD control.  
Press again → Off.  
REMOTE KEYPAD  
Accesses any channel from keypad.  
POWER  
CATV  
DVD  
TV  
VCR  
FLASHBACK  
Returns to previous channel.  
DISPLAY INPUT  
1
4
2
5
8
3
6
DISPLAY  
Press → Displays receiving channel for  
4 seconds.  
Press again → Removes display.  
• Temporarily displays receiving  
channel when in Closed Caption  
mode.  
PERSONAL PREFERENCE  
With the Personal Preference buttons,  
you can program your favorite  
programs by using the 4 categories A,  
B, C and D. The channels can be  
accessed quickly by using these  
buttons. (See page 33.)  
7
9
FLASHBACK  
ENTER  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
CH  
8
INPUT  
VOL  
VOL  
+
;
:
Press → Switches to external video  
INPUT 1 mode.  
Press twice → Switches to external video  
INPUT 2 mode.  
–
9
CH  
VOLUME UP/DOWN  
(k) Increases sound.  
(l) Decreases sound.  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
• Changes or selects the TV  
adjustments on On-Screen Display.  
Press 3 times → Switches to external  
video INPUT 3 mode or COMPONENT  
mode.  
PLAY  
:
REC  
REW  
(
FWD  
)
L
STOP  
Press 4 times → Switches back to the  
original TV mode. (See page 38.)  
PAUSE  
J
MENU  
Press → Accesses MAIN MENU.  
Press again → Exits MAIN MENU.  
ENTER  
Used in some instances where a Cable  
Converter Box requires an “enter”  
command after selecting channels, when  
using the REMOTE KEYPAD button.  
(See page 40.)  
TV • CATV • VCR • DVD  
MUTE  
Press → Mutes sound.  
Press again → Restores sound.  
• When sound is muted, CLOSED  
CAPTION appears if available.  
CHANNEL UP/DOWN  
(a) Selects next higher channel.  
(s) Selects next lower channel.  
• See pages 30–32 for Channel Setting.  
• Moves the “E” mark on the MENU  
screen  
POWER (DVD/VCR)  
Press → On.  
Press again → Off.  
SKIP/VCR-CH  
(See page 40.)  
DVD/VCR CONTROL  
(See page 40.)  
REC  
(See page 40.)  
Note:  
•
The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the  
remote control, place it under a fluorescent light or other lighting.  
•
•
•
•
•
The phosphorescent material contains no radioactive or toxic material, so it is safe to use.  
The degree of illumination will vary depending on the strength of lighting used.  
The degree of illumination will decrease with time and depending on the temperature.  
The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.  
Sunlight and fluorescent lighting are the most effective when charging the display.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
EZ SETUP during First Use  
L
When you turn on the TV for the first time, it will automatically  
memorize the broadcast channels.  
POWER  
POWER  
CATV  
DVD  
TV  
VCR  
Please perform the following instructions before pressing the  
POWER button.  
(1) Insert the batteries into the remote control. (See page 5)  
(2) Connect the antenna cable to the TV set. (See page 5 ~ 6)  
(3) Plug in the AC POWER cord to the wall outlet.  
DISPLAY INPUT  
VOLUME  
(+)/(–)  
1
4
2
5
8
3
6
7
9
FLASHBACK  
ENTER  
0
100  
D
PERSONAL PREFERENCE  
CHANNEL  
UP (8)/  
DOWN (9)  
A
B
C
CH  
8
VOL  
VOL  
+
;
:
–
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
MENU  
1 Press POWER on the TV set or on the Remote Control to turn on  
SE L ECT L ANGUAGE  
the TV. The SELECT LANGUAGE mode will be displayed.  
ENGL I SH  
ESPAÑOL  
FRANCA I S  
(Remote Control)  
(On the Set)  
SE L ECT : CH 8 / 9  
SE T  
: VOL + / –  
POWER  
(SELECT LANGUAGE mode)  
SE L ECT L ANGUAGE  
2 Press CH a/s to select “ENGLISH”, “SPANISH  
(ESPAÑOL)” or “FRENCH (FRANCAIS)”.  
ENGL I SH  
ESPAÑOL  
FRANCA I S  
CH  
8
SE L ECT : CH 8 / 9  
SE T  
: VOL + / –  
9
CH  
3 Press  
to SET LANGUAGE and access EZ SETUP  
VOL k/l  
CONNECT ANT ENNA OR  
CAB L E  
mode.  
S T ART E Z SE TUP ?  
S TOP  
S T ART  
VOL  
VOL  
;
:
+
–
(EZ SETUP mode)  
4 Press  
VOL k  
P L EA SE WA I T  
The tuner will automatically search for the broadcast  
and cableTV channels. (The CH No. will automatically  
increase when it appears.)  
AUTO PROGRAMM I NG  
1 2 5  
S TOP  
S T ART  
If you want to stop the EZ SETUP process once it has  
started, press  
If you want to SETUP again, please refer to page 29  
on CH SETUP.  
VOL  
+
:
and it will be canceled.  
VOL l  
To cancel EZ SETUP  
Press  
VOL l  
5 Once EZ SETUP is completed, the lowest channel number  
2
memorized will be displayed.  
Note:  
• If EZ SETUP does not memorize all the channels in your region, please refer to page 30 for more  
information on manually memorizing the channels using CHANNEL SETTING.  
• It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is  
incorrect or frequency jamming is occuring around the area. Please refer to pages 30 ~ 32 for more  
information on manually memorizing the channels using CHANNEL SETTING.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Demo Mode  
(On the Set)  
or  
• To quickly learn more about the TV set, press and hold for  
more than three seconds both  
MENU on the TV set.The TV set will go into DEMO mode and  
briefly explain the various features.  
and  
or  
CH s  
CH a  
• To cancel DEMO mode, again press and hold for more than  
three seconds both  
or MENU on the TV set.  
CH a/s  
CH a/s  
buttons  
MENU  
button  
Example:  
DEMO mode display  
F
r
o
m
SHARP  
M
i
nds  
duc  
SHARP  
P
r
o
t
s
Com  
e
Note:  
• Without signal on COMPONENT IN, video input and antenna in, the DEMO mode cannot be activated.  
Accessing the MAIN MENU screen without Remote Control  
(On the Set)  
• If you misplaced your Remote Control you can still access most settings via  
the MAIN MENU screen when you press MENU on the TV set.  
• Some features of yourTV set will not be accessible without the Remote Control.  
If you lost your Remote Control, contact a Sharp Service Center for a  
replacement.  
MENU  
button  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language  
L
L
The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.  
Setting the ON SCREEN DISPLAY Language.  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
MENU  
SE TUP  
(MAIN MENU screen)  
2 Press CH a/s to move the “a” mark to “SETUP”.  
MENU  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
CH  
8
9
CH  
SE TUP  
3 PressVOL k/lto access SETUP mode.  
SETUP  
L ANGUAGE  
ENERGY SAVE  
B L UE SCREEN  
VOL  
VOL  
;
:
+
–
(SETUP mode)  
L ANGUAGE  
VOL k/l  
4 Press  
to access LANGUAGE change mode.  
ENGL I SH  
ESPAÑOL  
FRANCA I S  
VOL  
VOL  
+
;
:
–
(LANGUAGE change mode)  
I D I OMA  
5 Press  
to select “ENGLISH”, “SPANISH  
(ESPAÑOL)” or “FRENCH (FRANCAIS)”.  
CH a/s  
ENGL I SH  
ESPAÑOL  
FRANCA I S  
CH  
8
9
CH  
MENU  
6 Press MENU to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Sleep Timer  
L
You can preset your television to turn off automatically in increments of 30, 60, 90 or 120  
minutes.  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
VOL k/l  
2 Press  
to access SLEEP TIMER mode.  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
MENU  
VOL  
VOL  
+
;
:
→
–
SE TUP  
(MAIN MENU screen)  
3 Press VOL k/l to set a sleep time of 30, 60, 90 or 120 minutes.  
SL EEP T I MER  
1 2 0M REMA I N  
VOL  
VOL  
+
;
:
–
(SLEEP TIMER mode)  
MENU  
4 Press MENU to exit.  
Note:  
• To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and select “– – – M REMAIN”  
during step 3.  
• While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular  
intervals or when the remote’s DISPLAY key is pressed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Video Adjust  
Description of Adjustment Items  
VOLUME  
(+)/(–)  
CHANNEL  
UP (8)/  
DOWN (9)  
Selected  
item  
button  
button  
VOL l  
VOL k  
PERSONAL PREFERENCE  
A
B
C
D
CH  
8
PICTURE  
TINT  
To increase contrast  
To decrease contrast  
VOL  
VOL  
+
;
:
–
9
CH  
To make skin tones greenish  
To increase color intensity  
To increase brightness  
To increase sharpness  
To make skin tones purplish  
To decrease color intensity  
To decrease brightness  
To decrease sharpness  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
COLOR  
BRIGHT  
SHARP  
MENU  
COLOR  
TEMP.  
To choose a MH, HIGH, LOW or ML COLOR TONE.  
RESET  
To return all adjustments to factory preset levels.  
1 Press MENU to access the MAIN MENU screen.  
2 Press to move the “a” mark to “VIDEO  
MENU  
S L EEP T I MER  
CH a/s  
ADJUST”.  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
CH  
8
MENU  
→
9
CH  
SE TUP  
(MAIN MENU screen)  
3 Press VOL k/lto access PICTURE adjust mode.  
P I CTURE  
2 7  
VOL  
VOL  
;
:
_ _ _ _ _ _ _  
+
–
(PICTURE adjust mode)  
CH a/s  
(Refer to the diagram below.)  
4 Press  
to select the desired mode.  
TINT  
COLOR  
BRIGHT  
SHARP  
PICTURE  
CH  
8
COLOR TEMP.  
: CH 9  
RESET  
9
CH  
: CH 8  
VOL k/l  
5 Press  
to adjust the setting.  
P I CTURE  
2 7  
VOL  
VOL  
+
;
:
_ _ _ _ _ _ _  
–
VOL UP (+)  
increase contrast  
VOL DOWN (–)  
decrease contrast  
6 Repeat steps 4 to 5 to adjust other settings.  
MENU  
7 Press MENU to exit.  
Note:  
• VIDEO ADJUST setting is available for AIR or CABLE/INPUT 1/INPUT 2 and COMPONENT respectively.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Audio Adjust  
VOL l  
button  
Selected item  
button  
VOL k  
TREBLE  
To increase treble response  
To decrease treble response  
BASS  
To increase bass response  
To decrease bass response  
BALANCE  
RESET  
To emphasize the right speaker’s volume  
To emphasize the left speaker’s volume  
To return all adjustments to factory preset levels.  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O AD J US T  
2 Press  
to move the “a” mark to “AUDIO  
CH a/s  
ADJUST”.  
AUD I O SE L ECT  
CH  
8
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
MENU  
→
9
CH  
SE TUP  
(MAIN MENU screen)  
3 Press  
to access TREBLE adjust mode.  
VOL k/l  
TREB L E  
0
VOL  
VOL  
;
:
+
–
(TREBLE adjust mode)  
4 Press  
to select the desired mode.  
CH a/s  
(Refer to the diagram below.)  
CH  
8
TREBLE  
BASS  
BALANCE  
RESET  
9
CH  
5 Press  
to adjust the setting.  
VOL k/l  
TREB L E  
0
VOL  
VOL  
+
;
:
–
6 Repeat steps 4 to 5 to adjust other settings.  
MENU  
7 Press MENU to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Audio Select  
L
L
MTS (Multichannel TV Sound)  
This circuit allows reception of stereo or bilingual TV sound.  
INTERNAL SPEAKER SWITCH  
This function turns the TV’s internal speakers “ON” or “OFF” when listening to sound from  
external speakers by using the AUDIO OUTPUT JACKS on page 39.  
L
FAO (Fixed Audio Output)  
This function turns the TV’s internal speakers “OFF” and allows fixed audio output from the  
AUDIO OUTPUT JACKS on page 39. With FAO, the TV’s volume control is disabled.  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press  
to move the “a” mark to “AUDIO  
CH a/s  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
SELECT”.  
CH  
8
MENU  
→
→
9
CH  
SE TUP  
(MAIN MENU screen)  
3 Press  
to access AUDIO SELECT mode.  
VOL k/l  
CH a/s  
AUD I O SE L ECT  
4 Press  
to move the “a” mark to “MTS”,  
MT S  
SPEAKER : ON  
FAO : OF F  
: SAP  
“SPEAKER” or “FAO”.  
CH  
8
VOL  
VOL  
+
;
:
–
9
CH  
(AUDIO SELECT mode)  
5 Press  
to select “STEREO”, “SAP” or “MONO” when  
the “a” mark is at “MTS” position.  
VOL k/l  
AUD I O SE L ECT  
MT S  
: S TEREO  
SPEAKER : ON  
FAO  
: OF F  
SPEAKER  
ON  
FAO  
ON  
MTS  
STEREO  
VOL  
VOL  
+
;
:
–
OFF  
OFF  
SAP  
(AUDIO SELECT mode)  
MONO  
MENU  
6 Press MENU to exit.  
Ex: Actual screen indicating ON AIR when receiving STEREO  
broadcasts  
Actual channel number  
1 2  
“← ON AIR” will appear next to STEREO or  
SAP when receiving STEREO or SAP broadcasts.  
S T E R E O O N A I R  
S A P  
O N A I R  
MO N O  
(CHANNEL call on screen)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Audio Select (Continued)  
L
You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.  
• Stereo broadcasts  
Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo  
sound.  
• SAP broadcasts  
Television broadcast can be received with either MAIN or SAP sound.  
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)  
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)  
L
If stereo sound is difficult to hear.  
• You can obtain clearer sound by manually switching to the fixed monaural mode.  
Note:  
• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo  
broadcast.You must switch the mode back to STEREO if you want to hear stereo sound again.  
• MTS while in the INPUT mode does not change the type of sound; in this case, sound is determined  
by the video source.  
• If the “FAO” mode is selected “ON”, the “SPEAKER” mode will automatically turn “OFF”.  
“SPEAKER” selecting will not affect “FAO” mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Closed Caption  
L
HOWTO SET CLOSED CAPTION  
•
Your TV is equipped with an internal Closed Caption decoder. “Closed  
Caption”is a system which allows you to view conversations, narration,  
and sound effects in TV programs and home videos as subscript on  
your TV screen as shown on the right.  
•
•
Not all the programs and videos will offer closed caption. Please look  
for the “  
” symbol to ensure that captions will be shown.  
Closed Caption broadcast can be viewed in two modes: CAPTION  
and TEXT. For each mode, two channels are available, CH1 and CH2:  
The [CAPTION] mode subscripts dialogues and commentaries of TV  
dramas and news programs while allowing clear view of the picture.  
The [TEXT] mode displays over the picture other various information  
(such as TV program schedule, weather forecast, etc.) that is  
independent of the TV programs.  
VOLUME  
(+)/(–)  
PERSONAL PREFERENCE  
A
B
C
D
CH  
8
CHANNEL  
UP (8)/  
DOWN (9)  
VOL  
VOL  
+
;
:
–
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
MENU  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press  
to move the “a”mark to “CLOSED  
CH a/s  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
CAPTION”.  
CH  
8
MENU  
→
9
CH  
SE TUP  
(MAIN MENU screen)  
3 Press  
to access CLOSED CAPTION setting mode.  
VOL k/l  
CLOSED CAPT I ON  
MODE : CAPT I ON  
DAT A : CH 1  
VOL  
VOL  
;
:
+
–
(CLOSED CAPTION setting mode)  
CLOSED CAPT I ON  
4 Press  
to move the “a” mark to either  
“MODE” or “DATA”.  
CH a/s  
MODE : CAPT I ON  
DAT A : CH 1  
CH  
8
9
CH  
5 Press  
to change the CLOSED CAPTION setting.  
VOL k/l  
CLOSED CAPT I ON  
CH 1  
CAPTION  
MODE : CAPT I ON  
DAT A : CH 1  
MODE:  
DATA:  
CH 2  
TEXT  
OFF  
VOL  
VOL  
+
;
:
–
MENU  
6 Press MENU to exit.  
Note:  
•
•
•
•
If a broadcast has CLOSED CAPTION and the MUTE button is pressed, the set enters [CAPTION] mode  
automatically. Pressing MUTE again will return the set to its previous condition.  
CLOSED CAPTION may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if  
there are problems at the broadcast source. This does not necessarily indicate a problem with your TV.  
If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION broadcast, the  
CLOSED CAPTION will disappear momentarily.  
When viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen may  
become dark and blank. Should this occur, set the CLOSED CAPTION mode to “OFF”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
Parental Control (V-CHIP Operation)  
L
V-CHIP  
• This function allows you to restrict TV programs and also allows you to control TV usage based on  
FCC data.This function is to prevent your children from watching violence or sexual scenes that may  
be harmful.  
• Restriction of TV programs includes two characters that contain information about the program’s  
MPAA rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are  
restricted by age and contents.  
• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for  
complete control.  
[1] MPAA RATING  
RATING  
G
GENERAL AUDIENCES. All ages admitted.  
PG  
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for  
children.  
age  
base  
PG-13  
PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate  
for children under 13.  
R
RESTRICTED. Under 17 requires accompanying parent or adult guardian.  
NO ONE 17 AND UNDER ADMITTED.  
NC-17  
X
X Rating is an older rating that is unified with NC-17 but may be encoded on  
older movie’s data.  
•
MPAA RATING (Example)  
Example 1.  
Example 2.  
“PG-13” in the age based RATING is blocked,  
this will automatically block the high ratings  
“R”, “NC-17”, “X” also.  
“R” in the age based RATING is blocked, this  
will automatically block the high rating “NC-  
17”, “X” also.  
1. User setting  
2. Block table  
1. User setting  
2. Block table  
not to  
not to  
G
–––––  
G
G
–––––  
G
block  
block  
not to  
not to  
PG  
–––––  
PG  
–––––  
PG  
PG  
block  
block  
Select  
block  
not to  
block  
PG-13 BLOCK  
BLOCK  
NC-17 BLOCK  
PG-13 –––––  
R BLOCK  
PG-13  
R
PG-13  
R
age  
base  
age  
base  
auto-  
Select  
R
block  
block  
auto-  
block  
auto-  
block  
NC-17 BLOCK  
NC-17  
X
NC-17  
X
auto-  
auto-  
X
BLOCK  
X
BLOCK  
block  
block  
Note:  
• MPAA RATING is only age based ratings.  
[2] TV PARENTAL GUIDELINES  
content base  
L
y
x
AGE  
D
S
V
FV  
(Fantasy  
Violence)  
RATING  
(Sexually  
(Adult  
(Sexual  
(Violence)  
Suggestive Language) Situation)  
Dialog)  
TV-Y (All children)  
V
V
V
–
–
–
–
–
–
–
–
–
–
–
–
–
V
–
TV-Y7 (Direct to Older Children)  
E
TV-G (General Audience)  
Age TV-PG (Parental Guidance  
base Suggested)  
V
V
V
V
V
–
TV-14 (Parents Strongly  
V
V
V
V
V
V
V
V
V
–
–
D
Cautioned)  
TV-MA (Mature Audience Only)  
–
V : Content Rating can be set.  
–
18  
: Content Rating cannot be set (not normally broadcast by TV station).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental Control (V-CHIP Operation Continued)  
• TV-PARENTAL GUIDELINES (Example)  
AGE  
D
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
F V  
–
T V – Y  
T V – Y 7  
T V –G  
T V – PG  
T V – 1 4  
T V –MA  
RE T URN  
Example 1.1 : Age Based setting  
Go through all select ratings and select unblocked for “AGE”.  
This will automatically unblock everything.  
–
–
–
–
–
V : B LOCK  
Example 1.2 : Age Based setting  
AGE  
D
–
–
–
V
V
–
L
–
–
–
V
V
V
S
–
–
V
–
–
F V  
–
For “TV-G” select “BLOCK” for “AGE”. This will automatically block the  
higher age ratings “TV-PG”, “TV-14” and “TV-MA” as well as  
“TV-G”.  
Furthermore, the content ratings “D”, “L”, “S”, “V”, “FV” are automatically  
blocked as well for “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.  
T V – Y  
T V – Y 7  
T V –G  
T V – PG  
T V – 1 4  
T V –MA  
RE T URN  
V
V
V
V
–
–
–
–
–
–
V
V
V
V
V
V
V : B LOCK  
Example 2.1 : Content Based setting  
AGE  
AGE  
AGE  
D
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
F V  
–
T V – Y  
T V – Y 7  
T V –G  
T V – PG  
T V – 1 4  
T V –MA  
RE T URN  
For “TV-PG”, “TV-14” and “TV-MA” select unblocked for each content  
ratings (“D”, “L”, “S”, “V”, “FV”) by leaving “AGE” unblocked for  
“TV-PG”, “TV-14” and “TV-MA”. If you choose to unblock for each one in  
content base.  
–
–
–
–
–
V : B LOCK  
Example 2.2 : Content Based setting  
D
–
–
–
L
–
–
–
S
–
–
–
V
–
–
F V  
–
T V – Y  
T V – Y 7  
T V –G  
T V – PG  
T V – 1 4  
T V –MA  
RE T URN  
Then for “TV-PG” and select “BLOCK” for only “V” (Violence). This will  
automatically block the higher ratings “TV-14-V” and “TV-MA-V”  
(“TV-14” and “TV-MA” for Violence content only).  
Please note that with these settings blocking does NOT occur.If a program  
is rated only “TV-MA”; it must be rated “TV-MA-V” to be blocked.  
–
–
–
–
–
V
V
V
–
V : B LOCK  
Example 3 : Reset an Age Based setting  
For “TV-14” and select again “BLOCK” for “AGE”.  
This will again automatically block the content ratings “D”, “L”, “S”, “V”,  
“FV” for “TV-MA” as well as “TV-14”.  
Please note that the lower age rating “TV-PG” did not change from its  
previous settings.  
D
–
–
–
L
–
–
–
S
–
–
–
V
–
–
–
F V  
–
T V – Y  
T V – Y 7  
T V –G  
–
–
–
–
T V – PG  
T V – 1 4  
T V –MA  
RE T URN  
V
V
V
–
V
V
V
V
V
V
V : B LOCK  
Note:  
• Content ratings can be modified but only in the combinations indicated by an V in the table on page  
18.  
• Changing a lower age rating’s content setting to “BLOCK” automatically changes the same higher  
age rating’s content setting to “BLOCK” regardless of their previous settings.  
• Changing a lower rating’s“AGE”setting to “BLOCK”automatically changes all higher ratings to“BLOCK”  
regardless of their previous settings.  
• Any rating’s “AGE” set to unblocked must have its content settings individually set.  
[3] ADDITIONAL MODE  
Besides the above “MPAA RATINGS” and “TV PARENTAL GUIDELINES” new ratings system’s data  
can be downloaded when they become available. (See page 22.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
Parental Control (V-CHIP Operation Continued)  
L
HOWTO SET V-CHIP  
1
4
2
5
8
3
6
REMOTE  
KEYPAD  
7
9
FLASHBACK  
ENTER  
VOLUME  
(+)/(–)  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
CH  
8
CHANNEL  
UP (8)/  
DOWN (9)  
VOL  
VOL  
+
;
:
–
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
[1] MPAA RATING  
MENU  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press CH a/s to move the “a” mark to  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
“PARENTAL CONTROL”.  
CH  
8
MENU  
→
9
CH  
SE TUP  
(MAIN MENU screen)  
PARENTA L CONTOL  
3 Press  
to access PARENTAL CONTROL mode.  
VOL k/l  
V – CH I P B LOCK  
V I EW T I MER  
VOL  
VOL  
;
:
+
–
(PARENTAL CONTROL mode)  
4 Press  
to access V-CHIP BLOCK select mode, then  
to select “MPAA RATING”.  
VOL k/l  
VOL k/l  
V – CH I P B LOCK  
press  
MPAA  
TV GU I DE L I NES  
OP T I ON  
SECRE T No .  
STA TUS : OF F  
:
– – – –  
VOL  
VOL  
+
VOL  
VOL  
+
;
:
;
:
→
–
–
(V-CHIP BLOCK select mode)  
MPAA  
5 Press  
to move the “a” mark to “PG”,  
CH a/s  
then press  
to select BLOCK. If you set “PG” to  
VOL k/l  
G
PG  
PG – 1 3  
R
NC– 1 7  
: – – – – –  
: B LOCK  
: B LOCK  
: B LOCK  
: B LOCK  
: B LOCK  
BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically blocked.  
CH  
8
X
VOL  
VOL  
+
RETURN  
;
:
→
–
9
CH  
CH a/s  
6 Press  
to move the“a”mark to "RETURN",  
MPAA  
then press VOL k/l to exit V-CHIP BLOCK select mode.  
G
PG  
: – – – – –  
: B LOCK  
: B LOCK  
: B LOCK  
: B LOCK  
: B LOCK  
CH  
8
PG – 1 3  
R
NC– 1 7  
VOL  
;
VOL  
+
:
→
–
9
CH  
X
RETURN  
Note:  
Ex.  
• If you set “G” to BLOCK , all RATING are automatically blocked.  
• If you set “X” to BLOCK, “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
Parental Control (V-CHIP Operation Continued)  
[2] TV GUIDELINES  
1 Repeat steps 1 to 3 of [1] MPAA RATING.  
V – CH I P B LOCK  
2 Press  
to access V-CHIP BLOCK select mode, then  
MPAA  
TV GU I DE L I NES  
OP T I ON  
VOL k/l  
press  
GUIDELINES”.  
to move the “a” mark to “TV  
CH a/s  
SECRE T No .  
STA TUS : OF F  
:
– – – –  
CH  
8
VOL  
;
VOL  
+
:
–
→
9
CH  
(V-CHIP BLOCK select mode)  
3 Press  
to access TV GUIDELINES mode.  
VOL k/l  
AGE  
D
–
–
L
–
–
S
–
–
–
V
V
V
V
–
–
F V  
–
V
–
–
–
–
TV – Y  
TV – Y 7  
TV –G  
TV – PG  
TV – 1 4  
TV –MA  
RETURN  
V
V
V
V
V
–
–
–
V
V
–
V
V
V
V
V
V
VOL  
VOL  
;
:
V : B LOCK  
+
–
(TV GUIDELINES mode)  
4 To change CONTENT SETTING, press  
to move  
VOL k/l  
CH a/s  
the “a” mark to the desired rating and then press  
to select.  
CH  
8
VOL  
VOL  
+
;
:
→
–
9
CH  
5 Press  
to move the “a” mark to the desired content and  
CH a/s  
then press  
T V – Y 7  
to select either “BLOCK” or unblock  
VOL k/l  
AGE  
D
L
S
V
F V  
RETURN  
: B LOCK  
: – – – – –  
: – – – – –  
: – – – – –  
: – – – – –  
: B LOCK  
(“– – – – –”).  
CH  
8
VOL  
VOL  
;
:
→
+
–
9
CH  
(CONTENT RATING mode)  
6 Press  
to move the“a”mark to "RETURN",  
CH a/s  
AGE  
D
–
–
L
–
–
S
–
–
V
–
–
F V  
–
TV – Y  
TV – Y 7  
TV –G  
TV – PG  
TV – 1 4  
TV –MA  
RETURN  
then press  
to return to TV GUIDELINES mode.  
VOL k/l  
V
V
V
V
–
–
–
–
–
–
–
–
V
V
–
V
V
V
V
V
V
V
V
V
CH  
8
VOL  
VOL  
+
;
:
→
–
9
CH  
V : B LOCK  
7 Repeat steps 4 to 5 until all ratings and their contents are set.  
MENU  
8 When done, press MENU to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
Parental Control (V-CHIP Operation Continued)  
[3] ADDITIONAL MODE (DOWNLOAD)  
There will be an additional new rating system. In that case, please set up as follows.  
Subsequently the new rating system will set up automatically.  
1 Repeat steps 1 to 3 of [1] MPAA RATING.  
V – CH I P B LOCK  
VOL k/l  
2 Press  
to access V-CHIP BLOCK select mode, then  
MPAA  
TV GU I DE L I NES  
OP T I ON  
press  
to move the “a” mark to “OPTION”.  
CH a/s  
SECRE T No .  
STA TUS : OF F  
:
– – – –  
CH  
8
VOL  
VOL  
+
;
:
→
–
9
CH  
(V-CHIP BLOCK select mode)  
3 Press  
to access OPTION mode, then press  
to move the “a” mark to “DOWNLOAD”, then press VOL k/l  
O P  
T
I
O N  
VOL k/l  
CH a/s  
to “DOWNLOAD : ON”.  
D OWN  
R
L
O A  
D
:
O N  
E
T
U R N  
CH  
8
VOL  
VOL  
+
VOL  
VOL  
+
;
:
;
:
→
→
–
–
9
CH  
(OPTION mode)  
MENU  
4 Press MENU to exit.  
• DOWNLOAD V-CHIP DATA  
1
4
7
2
5
8
3
6
REMOTE  
KEYPAD  
9
FLASHBACK  
ENTER  
VOLUME  
(+)/(–)  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
CH  
8
CHANNEL  
UP (8)/  
DOWN (9)  
VOL  
VOL  
+
;
:
–
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
MENU  
1 If you watch the program containing “New Rating System Data”,  
P
L
E
A
S
E
W A  
O A  
I
T
the DOWNLOAD screen will be displayed.  
N OW D OW N  
C H  
L
D
T
I
A
N G  
V
–
I
P
D
A
(DOWNLOAD screen)  
2 The DOWNLOAD screen will disappear, once downloading is  
finished.  
Note:  
• DOWNLOAD will not start, if you do not watch a program containing “New Rating System Data”.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental Control (V-CHIP Operation Continued)  
• How to set Additional mode (Example)  
O P  
T
I
O N  
1 Repeat steps 1 to 2 of [3] ADDITIONAL MODE.  
C
C
d
d
n
n
.
.
E
F
n
r
g
e
l
n
i
c
s
h
h
R
a
a
t
t
i
i
n
n
g
g
s
s
R
2 Press CH a/s to move the “a” mark to “Cdn.  
English Ratings”, then press VOL k/l  
.
D OWN  
R
L
O A  
D
:
O N  
E
T
U R N  
CH  
8
VOL  
VOL  
+
;
:
→
–
9
CH  
(After download the rating data)  
C
A
N
8
A
+
D
I
A N  
E
N G  
L
I
S H  
3 You can select “BLOCK” or “– – – – –” (unblock) from each RATING  
:
:
:
:
:
:
–
–
–
–
–
B
–
–
–
–
–
L
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
C
C
G
mode by pressing  
and VOL k/l.  
CH a/s  
P G  
1
1
R
4
8
E
+
+
T
CH  
8
O C K  
U R N  
S H O  
(
T
H R  
E
L
D
B
L
O C K  
)
VOL  
VOL  
+
;
:
→
–
9
CH  
(ENGLISH THRESHOLD BLOCK  
mode)  
C
A
N
A
D
I
A N  
F
R
E
N C H  
4 You can select “BLOCK” or “– – – – –” (unblock) from each RATING  
CH a/s  
:
:
:
:
:
–
–
–
–
B
–
–
–
–
L
–
–
–
–
–
–
–
–
–
–
–
–
G
8
1
1
1
R
T
mode by pressing  
and  
VOL k/l  
if  
a
3
6
8
E
n
a
a
a
T
s
n
n
n
+
s
s
s
+
+
+
you select “Cdn. French Ratings” in step 2.  
O C K  
U R N  
S H O  
(
H R  
E
L
D
B
L
O C K  
)
CH  
8
VOL  
VOL  
+
;
:
→
–
9
CH  
(FRENCH THRESHOLD BLOCK  
mode)  
Note:  
• In additional mode  
Including two types (English mode, French mode), altogether you are able to download 4 different  
modes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
Parental Control (V-CHIP Operation Continued)  
L
Turning On (Activating) the V-Chip Blocks  
1 Repeat steps 1 to 3 of [1] MPAA RATING.  
V –CH I P B LOCK  
2 Press  
to access V-CHIP BLOCK select mode, then  
VOL k/l  
to move the “a” mark to “SECRET No.”.  
MPAA  
TV GU I DE L I NES  
OP T I ON  
SECRE T No . : – – – –  
STA TUS : OF F  
press  
CH a/s  
CH  
8
VOL  
VOL  
+
;
:
–
→
9
CH  
(V-CHIP BLOCK select mode)  
3 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.  
V –CH I P B LOCK  
MPAA  
TV GU I DE L I NES  
OP T I ON  
SECRE T No . : 1 2 3 4  
STA TUS : OF F  
1
4
7
2
3
6
9
5
8
0
4 Press  
to move the “a” mark to “STATUS”,  
CH a/s  
V –CH I P B LOCK  
then press  
to activate theV-CHIP BLOCK.(If STATUS  
VOL k/l  
MPAA  
TV GU I DE L I NES  
OP T I ON  
is OFF, V-CHIP BLOCK will not operate.)  
SECRE T No . : 1 2 3 4  
STA TUS : OF F  
CH  
8
VOL  
VOL  
+
;
:
→
–
9
CH  
MENU  
5 When done, press MENU to exit.  
L
To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.  
1 “V-CHIP HAS BEEN ACTIVATED” will be displayed if you view a  
program containing Program Rating data as same as you  
configured.  
2 3  
V – CH I P HAS BE EN  
AC T I VA TED  
T V – Y 7  
Note:  
FV  
• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is  
not configured to “ON”.  
2 Press MENU, then “INPUT SECRET No.” will be displayed.  
I NPUT SECRE T N o .  
–
–
–
–
MENU  
3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD, then  
V-CHIP BLOCK temporarily will be canceled. If the wrong SECRET  
No. is chosen, “SECRET No. IS INCORRECT” will be displayed.  
Input the SECRET No. again in this case.  
I NPUT SECRE T N o .  
∗ ∗ ∗ ∗  
1
4
7
2
5
8
3
6
9
0
Note:  
• If you turn the power from OFF, the V-CHIP BLOCK will automatically reset to ON again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
Parental Control (V-CHIP Operation Continued)  
L To change the V-CHIP BLOCK setting. (Secret No. is registered.)  
1 Repeat steps 1 to 3 of [1] MPAA RATING, then “INPUT SECRET  
I NPUT SECRE T N o .  
No.” will be displayed.  
–
–
–
–
2 Enter the 4-digit “INPUT SECRET No.” using the REMOTE  
KEYPAD and the V-CHIP select mode will be displayed. Repeat  
configuration of the V-CHIP BLOCK.  
I NPUT SECRE T N o .  
∗ ∗ ∗ ∗  
1
4
7
2
5
8
3
6
9
0
L If you forget or need to change your Secret No., clear the original Secret No. and set up a  
new one.  
1 Repeat steps 1 to 3 of [1] MPAA RATING, or 1 to 2 of [LTo cancel  
the V-CHIP BLOCK screen while V-CHIP BLOCK has been  
activated], then “INPUT SECRET No.” will be displayed.  
(On the Set)  
2 Press and hold both  
and  
on the TV set  
CH a  
VOL k  
simultaneously until the message “INPUT SECRET No.”disappears.  
VOL k and CH a  
buttons  
MENU  
3 Press the MENU button to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
Parental Control (VIEW TIMER)  
L
VIEW TIMER  
This function allows you to restrict TV viewing time and also allows you to controlTV usage.  
This function is to prevent your children from watching too much TV.  
VIEWING TIME (an accumulative timer: counts only the time  
duration acquired while the TV is on.)  
• VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10  
V I EW T I MER  
hours) in 30 minutes intervals.  
V I EW I NG T I ME  
– –H – –M  
OF F T I ME  
– –H – –M  
SECRE T No . : – – – –  
STA TUS : OF F  
OFF TIME (RestrictsTV watching after theVIEWINGTIME reaches  
zero.)  
• OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours) in  
30 minutes intervals.  
STATUS (ON/OFF setting of VIEW TIMER)  
L
How to set VIEW TIMER.  
MENU  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
1 Press MENU to access the MAIN MENU screen.  
2 Press CH a/s to move the “a” mark to  
“PARENTAL CONTROL”.  
CH  
8
MENU  
→
SE TUP  
9
CH  
(MAIN MENU screen)  
PARENTA L CONTROL  
3 Press  
to access PARENTAL CONTROL mode.  
VOL k/l  
4 Press  
to move the “a” mark to “VIEW  
CH a/s  
V - CH I P B LOCK  
V I EW T I MER  
TIMER”.  
CH  
8
VOL  
VOL  
;
:
→
+
–
9
CH  
(PARENTAL CONTROL mode)  
V I EW T I MER  
5 Press  
to access VIEW TIMER mode.  
VOL k/l  
V I EW I NG T I ME  
– –H – –M  
OF F T I ME  
– –H – –M  
SECRE T No . : – – – –  
STA TUS : OF F  
VOL  
VOL  
;
:
+
–
(VIEW TIMER mode)  
V I EW T I MER  
6 Press CH a/s to select “VIEWING TIME” and  
“OFF TIME”. For each selection, press  
to set the  
VOL k/l  
V I EW I NG T I ME  
2H 0 0M  
OF F T I ME  
– –H – –M  
SECRE T No . : – – – –  
STA TUS : OF F  
time duration.  
CH  
8
VOL  
VOL  
+
;
:
→
–
9
CH  
7 Press  
to select “SECRET No.”. Enter a  
4-digit SECRET No. using REMOTE KEYPAD.  
CH a/s  
V I EW T I MER  
V I EW I NG T I ME  
2H 0 0M  
1
2
5
8
3
6
9
OF F T I ME  
CH  
8
5H 0 0M  
SECRE T No . : – – – –  
STA TUS : OF F  
4
7
→
9
CH  
0
8 Press  
to select “STATUS”. Press VOL k/l  
CH a/s  
V I EW T I MER  
to turn ON the “VIEW TIMER”. (If STATUS is OFF,  
V I EW I NG T I ME  
2H 0 0M  
OF F T I ME  
5H 0 0M  
SECRE T No . : 1 2 3 4  
STA TUS : ON  
VIEW TIMER will not operate.)  
CH  
8
VOL  
VOL  
+
;
:
→
–
9
CH  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
Parental Control (VIEW TIMER Continued)  
MENU  
9 Press MENU to exit.  
Example  
V I EW T I MER  
• To restrict anybody from watching the TV for 5 hours, after watching  
the TV for 2 hours, your settings would look like this:  
V I EW I NG T I ME  
2H 0 0M  
OF F T I ME  
5H 0 0M  
SECRE T No . : 1 2 3 4  
STA TUS : ON  
• They can choose to watch the 2 hours of TV however they wish. For  
example, they could watch 1 hour of TV, turn TV off for 30 minutes,  
then turn TV on and watch the remaining 1 hour on the VIEWING  
TIMER.  
L
To change the VIEW TIMER settings. (SECRET No. is registered)  
I NPUT SECRE T N o .  
1 Repeat “How to set VIEW TIMER” steps and select “PARENTAL  
CONTROL VIEW TIMER” during step 3. Press  
, and  
VOL k/l  
–
–
–
–
“INPUT SECRET No.” will be displayed.  
VOL  
;
VOL  
:
+
–
2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD, and  
V I EW T I MER  
the VIEW TIMER mode will be displayed. Repeat step 6 ~ 9.  
V I EW I NG T I ME  
2H 0 0M  
OF F T I ME  
5H 0 0M  
SECRE T No . : 1 2 3 4  
STA TUS : OF F  
1
4
7
2
5
8
3
6
9
0
Note:  
• When you choose the correct SECRET No., the VIEW TIMER mode is  
displayed. If the wrong SECRET No. is chosen, “SECRET No. IS  
INCORRECT” is displayed. Input the SECRET No. again in this case.  
SECRE T No . I S  
I NCORRECT  
L
To cancel the VIEW TIMER (While the TV set is OFF but the VIEW  
TIMER is set)  
T I ME OVER  
I NPUT SECRE T No .  
1 Turn on TV; a blue screen message “TIME OVER” will appear. If  
–
–
–
–
you do nothing, the TV will turn off in approximately 30 seconds.  
2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD.When  
you choose the correct SECRET No., theVIEWTIMER is canceled.  
If the wrong SECRET No.is chosen, “SECRET No.IS INCORRECT”  
is displayed. Input the SECRET No. again in this case.  
T I ME OVER  
I NPUT SECRE T No .  
∗ ∗ ∗ ∗  
1
4
7
2
5
8
3
6
9
0
L
To cancel the VIEW TIMER setting or change the SECRET No.  
(When you forget the SECRET No.)  
I NPUT SECRE T N o .  
1 Repeat “How to set VIEW TIMER” steps and select “PARENTAL  
–
–
–
–
CONTROL VIEW TIMER” during step 3. Press  
, and  
VOL k/l  
“INPUT SECRET No.” will be displayed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
Parental Control (VIEW TIMER Continued)  
(On the Set)  
2 Press and hold both VOL k and  
on the TV set  
CH a  
simultaneously until the VIEW TIMER mode is displayed. Now you  
can cancel the VIEW TIMER settings or change the SECRET No.  
while “INPUT SECRET No.” is displayed.  
VOL k and CH a  
buttons  
L
Notice of Remaining VIEWING TIME  
V I EW T I MER  
0 H 3 0M REMA I N  
• For every 30 minute interval, the “remaining time” will be displayed for  
4 seconds.For the last 5 minutes, the “remaining time” will be displayed  
every minute.  
V I EW T I MER  
0 H 0 5M REMA I N  
V I EW T I MER  
0 H 0 0M REMA I N  
• “0H00M REMAIN” will be displayed for 10 seconds just before the  
VIEWING TIME is complete.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
Ch Setup  
L
EZ SETUP  
1
4
2
5
8
3
6
REMOTE  
KEYPAD  
By operating the channel preset functions, you can preset your  
TV to the desired channels for viewing.  
7
9
FLASHBACK  
ENTER  
VOLUME  
(+)/(–)  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
CH  
8
CHANNEL  
UP (8)/  
DOWN (9)  
VOL  
VOL  
+
;
:
–
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
MENU  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press  
to move the “a” mark to “CH  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
CH a/s  
SETUP”.  
CH  
8
MENU  
→
9
CH  
SE TUP  
(MAIN MENU screen)  
3 Press  
to access CH SETUP mode, then press  
to move the “a” mark to “EZ SETUP”.  
VOL k/l  
CH SE TUP  
CH a/s  
A I R / CA B L E  
CH MEMORY  
CH SEARCH  
CH  
8
PERSONA L PRE F .  
UN I VERSA L P L US  
EZ SE TUP  
VOL  
VOL  
+
;
:
→
–
9
CH  
(CH SETUP mode)  
4 Press  
to access EZ SETUP mode.  
VOL k/l  
CONNECT ANTENNA OR  
CAB L E  
ST ART E Z SE TUP ?  
S TOP  
S T ART  
VOL  
VOL  
;
:
+
–
(EZ SETUP mode)  
5 Press  
VOL k  
P L EASE WA I T  
The tuner will automatically search for the broadcasting and cable  
TV channels. (The CH No. will automatically increase when it  
appears.)  
AUTO PROGRAMM I NG  
1 2 5  
S TOP  
S T ART  
If you want to stop the EZ SETUP process once it has started,  
press  
. Search will be canceled.  
VOL l  
VOL  
+
To cancel EZ SETUP  
Press  
:
VOL l  
6 Once EZ SETUP is completed, the lowest channel number  
2
memorized will be displayed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
Ch Setup (Continued)  
L CHANNEL SETTING  
If EZ SETUP does not memorize all the channels in your region, follow the instructions below  
to manually memorize the channel.  
1 AIR/CABLE setting  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press  
to move the “a” mark to “CH  
CH a/s  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
SETUP”.  
CH  
8
MENU  
→
9
CH  
SE TUP  
(MAIN MENU screen)  
CH SE TUP  
3 Press  
to access CH SETUP mode.  
VOL k/l  
A I R / CA B L E  
CH MEMORY  
CH SEARCH  
PERSONA L PRE F .  
UN I VERSA L P L US  
EZ SE TUP  
VOL  
VOL  
;
:
+
–
(CH SETUP mode)  
A I R / CAB L E  
4 Press  
to access AIR/CABLE mode.  
VOL k/l  
A I R  
CAB L E STD  
CAB L E HRC  
CAB L E I RC  
VOL  
VOL  
+
;
:
–
(AIR/CABLE mode)  
A I R / CAB L E  
CH a/s  
5 Press  
to move the “a” mark to the desired  
mode.  
A I R  
CAB L E STD  
CAB L E HRC  
CAB L E I RC  
CH  
8
CABLE STD  
CABLE HRC  
CABLE IRC  
AIR  
9
CH  
(AIR/CABLE mode)  
MENU  
6 Press MENU to exit.  
Note:  
• Receivable channels of your TV set are:  
AIR channels:  
CABLE channels:  
1 (HRC and IRC mode only)  
2 through 125 (STD, HRC and IRC)  
VHF: 2 through 13.  
UHF: 14 through 69.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
Ch Setup (Continued)  
2 How to save broadcast TV channels into memory.  
POWER  
CATV  
DVD  
TV  
VCR  
DISPLAY INPUT  
1
4
2
5
8
3
6
VOLUME  
(+)/(–)  
7
9
FLASHBACK  
ENTER  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
CH  
8
CHANNEL  
UP (8)/  
DOWN (9)  
VOL  
VOL  
+
;
:
–
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
MENU  
CH  
8
1 Press MENU to access the MAIN  
CH SE TUP  
MENU  
MENU screen, then press  
→
→
CH a/s  
A I R / CA B L E  
CH MEMORY  
CH SEARCH  
PERSONA L PRE F .  
UN I VERSA L P L US  
EZ SE TUP  
9
CH  
to move the “a” mark to “CH SETUP”.  
CH  
8
2 Press  
to access CH  
VOL k/l  
SETUP mode, then press  
(CH SETUP mode)  
VOL  
VOL  
CH a/s  
;
:
+
–
9
CH  
to move the “a” mark to “CH SEARCH”.  
VOL  
VOL  
3 Press  
to access CH  
VOL k/l  
;
:
+
–
SEARCH mode.  
To start:  
Press  
(START)  
VOL k  
. The tuner will search  
CH SEARCH  
through all available channels in your  
area and add them into the TV’s  
memory.  
VOL  
:
+
A I R  
1 2  
S TOP  
S T ART  
To stop:  
Press  
(CH SEARCH mode)  
(STOP)  
.CH SEARCH will stop  
VOL l  
at the current channel and will not  
add any higher channels.  
VOL  
;
–
MENU  
4 Press MENU to exit.  
Note:  
• If you press  
again while in the CH SEARCH mode, auto-  
VOL k  
program will start again, and the previously memorized channels will  
be lost.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ch Setup (Continued)  
3 How to add or erase weak, additional or unwanted channels from TV memory.  
1 Press MENU to access the MAIN MENU screen, then press  
MENU  
S L EEP T I MER  
to move the “a” mark to “CH SETUP”.  
CH a/s  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
CH  
8
MENU  
→
9
CH  
SE TUP  
(MAIN MENU screen)  
CH SE TUP  
2 Press  
to access CH SETUP mode, then press  
to move the “a” mark to “CH MEMORY”.  
VOL k/l  
CH a/s  
A I R / CA B L E  
CH MEMORY  
CH  
8
CH SEARCH  
PERSONA L PRE F .  
UN I VERSA L P L US  
EZ SE TUP  
VOL  
VOL  
+
;
:
→
–
9
CH  
(CH SETUP mode)  
CH MEMORY  
3 Press  
to access CH MEMORY mode.  
VOL k/l  
A I R  
1 2  
ERAS E  
ADD  
VOL  
VOL  
;
:
+
–
(CH memory mode)  
4 Use  
or REMOTE KEYPAD to select  
CH a/s  
each desired channel to add or erase.  
1
4
7
2
5
8
3
CH  
8
6
or  
9
9
CH  
ENTER  
0
100  
5 Press  
to add a channel to the TV’s memory or press  
to erase a channel from the TV’s memory.  
VOL k  
VOL l  
VOL  
VOL  
+
;
:
–
MENU  
6 Press MENU to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
Ch Setup (Continued)  
L
PERSONAL PREFERENCE  
By setting the PERSONAL PREFERENCE channels in advance,  
you can select your favorite channels easily.  
REMOTE  
KEYPAD  
1
4
2
5
8
3
6
7
9
FLASHBACK  
ENTER  
VOLUME  
(+)/(–)  
CHANNEL  
UP (8)/  
DOWN (9)  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
PERSONAL  
PREFERENCE  
CH  
8
VOL  
VOL  
+
;
:
–
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
MENU  
1 Press MENU to access the MAIN MENU screen.  
2 Press to move the “a” mark to  
MENU  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
CH a/s  
“CH SETUP”.  
CH  
8
MENU  
→
PARENT A L CONTROL  
CH SE TUP  
SE TUP  
9
CH  
(MAIN MENU screen)  
CH SE TUP  
3 Press VOL k/l to access CH SETUP mode, then press  
CH a/s  
to move the “a” mark to “PERSONAL  
PREFERENCE”.  
A I R / CA B L E  
CH MEMORY  
CH SEARCH  
PERSONA L PRE F .  
UN I VERSA L P L US  
EZ SE TUP  
CH  
8
VOL  
VOL  
+
;
:
→
–
9
CH  
(SETUP mode)  
4 Press  
to select PERSONAL PREFERENCE select  
mode in which you can program 4 favorite channels, in 4 different  
categories. (total of 16 channels)  
VOL k/l  
PERSONA L PRE F .  
< A >  
B
C
D
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
VOL  
VOL  
+
;
:
–
(PERSONAL PREFERENCE select mode)  
PERSONA L PRE F .  
5 P r e s s  
to move the “a” mark to the desired  
CH a/s  
position.  
< A >  
B
C
D
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
CH  
8
9
CH  
6 Press REMOTE KEYPAD on the Remote to input the CHANNEL  
PERSONA L PRE F .  
Number into the memory.  
< A >  
B
C
D
1
4
7
2
5
8
3
6
1 2 5  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
Example:  
125 — Press “100” followed by “2” and then “5”.  
9
ENTER  
25 — Press “2” and then “5”.  
0
100  
4
— Press “0” and then “4”.  
7 Repeat steps 4 to 6 to input the next CHANNEL Number.  
MENU  
8 Press MENU to exit.  
PERSONA L PRE F .  
To select the PERSONAL PREFERENCE channel.  
If the channels are memorized as shown to the right,  
press the Remote’s “A” button to select the Channels below.  
< A >  
B
C
D
1 2 5  
2 5  
4 0  
4
8 5  
1 2 3  
5 5  
3 8  
3 0  
– – –  
– – –  
– – –  
– – –  
– – –  
– – –  
125 25 40  
4
– – –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
Ch Setup (Continued)  
VOLUME  
(+)/(–)  
L
UNIVERSAL PLUS FUNCTION  
PERSONAL PREFERENCE  
VCR or DVD input mode will be selected automatically by pressing  
the VCR or DVD PLAY buttons on the UNIVERSAL REMOTE  
CONTROL.  
A
B
C
D
CH  
8
CHANNEL  
UP (8)/  
DOWN (9)  
VOL  
VOL  
+
;
:
–
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
MENU  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press  
to move the “a” mark to “CH SETUP”.  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
CH a/s  
CH  
8
MENU  
→
9
CH  
SE TUP  
(MAIN MENU screen)  
3 Press  
to access CH SETUP mode, then press  
to move the “a” mark to “UNIVERSAL PLUS”.  
VOL k/l  
CH SE TUP  
CH a/s  
A I R / CA B L E  
CH MEMORY  
CH SEARCH  
CH  
8
PERSONA L PRE F .  
UN I VERSA L P L US  
EZ SE TUP  
VOL  
VOL  
+
;
:
→
–
9
CH  
(CH SETUP mode)  
UN I VERSA L P L US  
4 Press  
to access UNIVERSAL PLUS to select VCR  
VOL k/l  
or DVD mode.  
VCR : OF F  
DVD : OF F  
VOL  
VOL  
;
:
+
–
(EZ SETUP mode)  
UN I VERSA L P L US  
5 Press  
to select the VCR or DVD, and press  
CH a/s  
to select “CH3, CH4”, “INPUT 1 (or  
VOL k/l  
VCR : CH 3  
DVD : OF F  
COMPONENT)”, “INPUT 2” or “OFF”.  
INPUT 1 (or COMPONENT)  
INPUT 2  
CH3  
CH4  
OFF  
Set model to the input in which your  
VCR or DVD is connected to. If done  
through RF, select either channel 3 or  
4 to match the setting of the VCR or  
DVD.  
(UNIVERSAL PLUS select mode)  
CH  
8
VOL  
VOL  
+
→
;
:
–
9
CH  
MENU  
6 Press MENU to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
Set Up  
L ENERGY SAVE  
POWER  
CATV  
DVD  
TV  
This feature lets you lower the power consumption of yourTV set  
which in turn saves you money and minimizes the impact on the  
environment. When this feature is turned on, it reduce the  
brightness of the TV to a level that consumes approximately 20  
percent less energy than when the feature is turned off.  
The reduction in brightness will be less noticeable under low room  
lighting conditions.  
VCR  
DISPLAY INPUT  
1
4
2
5
8
3
6
VOLUME  
(+)/(–)  
7
9
FLASHBACK  
ENTER  
0
100  
D
PERSONAL PREFERENCE  
A
B
C
CH  
8
CHANNEL  
UP (8)/  
DOWN (9)  
VOL  
VOL  
+
;
:
–
9
CH  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
MENU  
1 Press MENU to access the MAIN MENU screen.  
MENU  
S L EEP T I MER  
2 Press  
to move the “a” mark to “SETUP”.  
CH a/s  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
CH  
8
MENU  
→
9
CH  
SE TUP  
(MAIN MENU screen)  
SETUP  
3 Press  
to access SETUP select mode, then press  
to move the “a”mark to“ENERGY SAVE”.  
VOL k/l  
CH a/s  
L ANGUAGE  
ENERGY SAVE  
B L UE SCREEN  
CH  
8
VOL  
VOL  
+
;
:
→
–
9
CH  
(SETUP mode)  
4 Press  
to access ENERGY SAVE select mode.  
VOL k/l  
ENERGY SAVE  
: OF F  
VOL  
;
VOL  
:
+
–
(ENERGY SAVE select mode)  
5 Press  
to select “ON”.  
VOL k/l  
ENERGY SAVE  
: ON  
VOL  
;
VOL  
+
:
–
MENU  
6 Press MENU to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
Set Up (Continued)  
L BLUE SCREEN  
Automatically turns the screen blue if a broadcast signal is not received.  
1 Press MENU to access MAIN MENU screen.  
MENU  
S L EEP T I MER  
V I DEO AD J US T  
AUD I O AD J US T  
AUD I O SE L ECT  
CLOSED CAPT I ON  
PARENT A L CONTROL  
CH SE TUP  
2 Press  
to move the “a” mark to “SETUP”.  
CH a/s  
CH  
8
MENU  
→
9
CH  
SE TUP  
(MAIN MENU screen)  
SETUP  
3 Press  
to access SETUP mode, then press  
to move the “a” mark to “BLUE SCREEN”.  
VOL k/l  
CH a/s  
L ANGUAGE  
ENERGY SAVE  
B L UE SCREEN  
CH  
8
VOL  
VOL  
+
;
:
→
–
9
CH  
(SETUP mode)  
4 Press  
to access BLUE SCREEN select mode.  
VOL k/l  
B L UE SCREEN  
: OF F  
VOL  
;
VOL  
:
+
–
(BLUE SCREEN select mode)  
5 Press  
to select “ON”.  
VOL k/l  
B L UE SCREEN  
: ON  
VOL  
;
VOL  
+
:
–
MENU  
6 Press MENU to exit.  
When BLUE SCREEN is set to “ON”.  
No signal  
Blue screen  
TV off  
After five  
seconds  
After 15  
minutes  
Standby  
mode  
Note:  
• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function  
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch  
the BLUE SCREEN “OFF”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
Using the Video and Audio Input Jacks  
L Connecting video equipment for playback of video material.  
• When the television is connected to video equipment as shown below, the material being played back  
on the video equipment can be seen on the television screen.  
Connecting video device equipped with video output terminals.  
CONNECTIONS  
VIDEO EQUIPMENT  
(Front connection  
terminals of TV)  
(Pull open for inside door)  
To VIDEO OUTPUT  
CAMCORDER  
To AUDIO OUTPUT (L)  
To AUDIO OUTPUT (R)  
(Rear connection  
terminals of TV)  
IN 1  
COMPONENT  
TV GAME  
LINE  
OUT  
R
Y
AUDIO  
L
P
B
R
R
L
P
VIDEO  
VCR  
To VIDEO OUTPUT  
To AUDIO OUTPUT (L)  
To AUDIO OUTPUT (R)  
DVD  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
Using the Video and Audio Input Jacks (Continued)  
(Rear connection terminals of TV)  
Video Equipment  
IN 1  
COMPONENT  
Video Equipment with  
Component Video  
LINE  
OUT  
R
Y
AUDIO  
L
(Component Color)  
PB  
Output Jacks (Y, PB and PR  
)
R
L
PR  
VIDEO  
To AUDIO  
OUTPUT  
(L/R)  
To COMPONENT  
VIDEO OUTPUT  
Jacks  
L To watch video material playback.  
• Press the Remote’s INPUT button to select the VIDEO INPUT mode for the video equipment you wish  
to play.  
• The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed.  
AIR  
or  
CABLE  
INPUT 1 (or COMPONENT)  
INPUT 2  
(IN 2)  
Front  
(IN 1)  
Rear  
• When the AV cables are being connected to the VIDEO INPUT 1 and COMPONENT Y terminals  
simultaneously, the COMPONENT terminal has priority over the VIDEO terminal.  
• INPUT mode can be selected by pressing either the CH a on the TV remote control when the TV  
is set to the highest channel stored in memory, or by pressing the  
lowest channel.  
when it is set to the  
CH s  
Note:  
• When connecting video or audio equipment to the television, be sure that the power is turned off in  
order to prevent damage to either the television or the equipment being connected.  
• It is the intent of SHARP that this product be used in full compliance with the copyright law of the  
United States and that prior permission be obtained from copyright owners whenever necessary.  
• For detailed information on the connection and use of auxiliary equipment, refer to the instruction  
manuals of the equipment being used.  
• The connection cords can be obtained from your local video store.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
Using the Audio Output Jacks  
L
These jacks are used for connecting an external audio amplifier. The STEREO/MONO/SAP,  
VOLUME, MUTE and FAO functions can all be controlled via the television’s remote control or  
directly on theTV itself.These jacks relay the audio signal of all programs being displayed on  
theTV screen.  
(AUDIO OUTPUT JACKS are located on the rear of the cabinet.)  
CONNECTIONS  
(Rear connection  
terminals of TV)  
IN 1  
COMPONENT  
LINE  
OUT  
IN  
1
R
COMPONENT  
Y
PB  
PR  
LINE  
OUT  
Y
R
AUDIO  
L
P
B
R
R
L
P
VIDEO  
AUDIO  
L
R
L
VIDEO  
To the audio  
input terminals  
Stereo Amplifier  
Speaker System  
(1) Before connecting the cables, turn on theTV and adjust theVOLUME control on theTV to a moderate  
listening level.  
(2) Turn off the TV and connect the audio cables to the AUDIO LINE OUTPUT JACKS on the TV.  
(3) Turn the TV set and stereo amplifier on.  
(4) If you desire, you can turn off the sound to the TV’s internal speakers by acessing the TV’s AUDIO  
SELECT mode. See page 22 ~ 23.  
(5) Adjust the VOLUME control on the stereo amplifier for a moderate listening level.  
(6) Control of the audio can be adjusted using the audio controls (STEREO/MONO/SAP, VOLUME,  
MUTE and FAO), from either the remote control, or directly from the TV set.  
Note:  
• For detailed information on the connection and use of auxiliary equipment, refer to the operation  
manuals of the equipment being used.  
• When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio  
connection cord and plug adaptor as shown below.  
• For optimal sound quality, we recommend you to keep the TV’s audio output level high.  
Plug adapter  
To the equipment  
being connected  
To the TV  
Pin plug x 2  
Pin Plug  
Pin jack/Mini plug  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
Operation of Remote Control  
L Universal Remote Control  
L “Identifying” Remote VCRs, cable TV  
conveters and DVDs  
With the purchase of your television set you  
also have received the latest innovation in  
remote control technology.With its easy-to-use  
push button keyboard, your Remote can control  
your television set and most infrared remote  
controlled VCRs, cable TV converters and  
DVDs as well.  
Your Remote Control has been set at the factory  
to operate your TV and many remote control  
VCRs, cable TV converters and DVDs.  
However, in some cases an easy one-time set-  
up step may be necessary before the Remote  
will operate accessory VCRs, cable TV  
converters and DVDs.  
• In this set-up step, the Remote locates and  
memorizes the remote control transmitter code  
for the VCR, cable TV converters and DVDs.  
• Once “identified”, the Remote sends the proper  
remote signals to operate your accessory.  
• This identify step will not have to be repeated  
until power to the Remote is interrupted due to  
a battery failure.  
Note:  
• Depending on the model, year produced, brand  
and type of VCR, cable TV converter and DVD,  
some models may not be compatible with the  
remote control.  
• Some brands may not enable channel selection  
until the ENTER button is pressed.  
Example:  
L USING YOUR REMOTE CONTROL WITH A  
When you select channel 24,  
VCR  
(1) Press REMOTE KEYPAD “2”.  
(2) Press REMOTE KEYPAD “4”.  
(3) Press ENTER.  
For detailed information on the use of the Cable  
TV converter Box refer to their operating  
manuals.  
Once you make certain the Remote Control has  
“identified”your remote controlledVCR or DVD,  
the Remote Control is ready to operate your  
unit.The various VCR or DVD function buttons  
on the Remote Control will not operate your  
VCR or DVD if those features are not already  
found on your unit.  
L UsingYour Remote WithYour TV  
After installing the batteries, press the TV/VCR  
on the remote to select the TV mode. (If you  
can change the channel of the TV by pressing  
• All VCR buttons will operate whether the  
Remote Control is in TV or VCR modes.  
• For detailed information on the use of the VCR  
or DVD, refer to the operation manual of the  
VCR or DVD.  
on the Remote Control, it is the  
CH a/s  
TV mode.)  
POWER  
CATV  
DVD  
TV  
VCR  
PLAY -  
Press to playback a tape or disc.  
REMOTE KEYPAD  
Use to enter two-digit code numbers  
when identifying your VCR.  
DISPLAY INPUT  
1
4
2
5
8
3
6
POWER (DVD/VCR)  
Press to turn the VCR or DVD on and  
off.  
ENTER  
7
9
FLASHBACK  
ENTER  
0
100  
D
VCR  
CH a/s  
PERSONAL PREFERENCE  
REWIND 3  
A
B
C
Press to scan up or down through  
channels on the VCR.  
CH  
8
Press to rewind a tape or reverse a  
disc. For some VCRs or DVDs you  
may need to press STOP first, then  
REWIND.  
VOL  
VOL  
+
;
:
–
9
CH  
DVD SKIP  
Press to jump forward to the beginning  
of the next chapter/track, or backward  
to the beginning of the current chapter/  
track, and automatically start to play  
that chapter/track.  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
PLAY  
:
REC  
STOP L  
Press to stop the tape or disc.  
REW  
(
FWD  
)
L
STOP  
PAUSE  
J
PAUSE J  
FF 2  
Press to temporarily stop the tape or  
disc during playback or recording (VCR  
only).  
Press to rapidly advance the tape or  
disc. For some VCRs or DVDs, you  
may need to press STOP first, then  
FF.  
TV • CATV • VCR • DVD  
Press again to release Pause.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40  
Operation of Remote Control (Continued)  
POWER  
CATV  
DVD  
TV  
TV POWER  
CATV/DVD-TV/VCR  
DISPLAY  
VCR  
DISPLAY INPUT  
1
4
2
5
8
3
6
REMOTE  
KEYPAD  
7
9
FLASHBACK  
ENTER  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
CH  
8
VOL  
VOL  
+
;
:
–
9
CH  
CHANNEL UP (,)/  
DOWN(9)  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
PLAY  
POWER  
(DVD/VCR)  
:
REC  
REW  
(
FWD  
)
L
STOP  
PAUSE  
J
TV • CATV • VCR • DVD  
Some brands have more than one remote code  
listed, due to changes in the remote codes from  
early to later model years, or due to format  
differences (VHS/BETA). In such cases, you  
may have to try more than one code to find the  
code your VCR accepts.  
L HOWTO IDENTIFY A VCR  
The remote control may already be set to  
operate your VCR. Try this initial check before  
going on to the following “identify” section.  
(1) Press TV/VCR button.  
(2) Point remote towards VCR and press POWER  
(DVD/VCR).  
Depending on the model, year produced, brand,  
and type of VCR, some models may not be  
compatible with the remote control.  
(3) Does the remote turn the VCR ON and OFF?  
• If yes, the remote is ready to operate the VCR  
and no further steps are needed.  
• If no, continue to the “identify” section.  
L To IdentifyYour VCR – Search Method.  
(1) Press TV/VCR button.  
L To IdentifyYourVCR – Direct Entry Method.  
Use the following steps and list to quickly find  
the remote control code for your accessory  
VCR.  
(2) Press POWER on the VCR to ON.  
(3) Stand at least six feet away from the front of  
the VCR.  
• First look up your VCR’s remote control code  
number before going through the direct code  
entry steps control.  
• If this procedure does not identify your  
accessory VCR, use the Search method of  
identification (described in the next section).  
Point the remote towards the VCR.  
Hold down DISPLAY and CH a at the  
same time. KEEP HOLDING THE BUTTONS  
DOWN.  
(4) Watch the Channel Number indicator on the  
VCR, Channel numbers will scan up when the  
VCR has been identified.  
(1) Press TV/VCR button.  
Release DISPLAY and CH a as soon as  
the channel numbers start to scan up.  
The VCR’s remote control code number has  
been identified, and the remote is ready to  
operate the VCR.  
CH s  
(2) Press and hold down DISPLAY and  
on your remote control.  
Then release both buttons.  
(3) Within ten seconds after releasing DISPLAY  
and , enter yourVCR’s two-digit  
CH s  
remote control code number using the  
REMOTE KEYPAD (refer to list).  
• The remote control is now ready to send  
commands to your VCR.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
Operation of Remote Control (Continued)  
REMOTE CONTROL  
CODE NUMBER  
POWER  
CATV  
DVD  
TV  
VCR BRAND  
TV  
CATV/DVD-  
TV/VCR  
VCR  
POWER  
Akai  
25, 26, 37  
15, 22, 30  
32  
04  
34  
10, 31  
04  
34  
15, 22, 30  
29  
21, 32, 35  
09, 10, 11  
28, 29  
04  
DISPLAY INPUT  
Audio Dynamics  
Broksonic  
Canon  
Capehart  
Craig  
Curtis Mathis  
Daewoo  
DBX  
Dynatech  
Emerson  
Fisher  
DISPLAY  
1
4
2
5
8
3
6
REMOTE  
KEYPAD  
7
9
FLASHBACK  
ENTER  
0
100  
D
PERSONAL PREFERENCE  
A
B
C
CH  
8
VOL  
VOL  
+
;
:
–
9
CH  
CHANNEL  
UP (,)/  
DOWN(9)  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
Funai  
PLAY  
:
REC  
GE  
REW  
(
FWD  
)
L
STOP  
Goldstar  
Hitachi  
24  
06  
PAUSE  
J
Instant Replay  
JC Penney  
JVC  
Kenwood  
Lloyds  
04  
04, 06, 24, 30  
15, 41, 42  
14, 15  
29  
TV • CATV • VCR • DVD  
Magnavox  
Magnin  
04, 05, 08  
31  
Marantz  
Memorex  
Minolta  
Mitsubishi  
Montgomery Ward  
Multitech  
NEC  
Panasonic  
Pentax  
Philco  
Philips  
Quasar  
RCA  
Realistic  
Samsung  
Sanyo  
Scott  
Sears  
30  
TIPS ON IDENTIFYINGYOUR VCR:  
04, 10, 24, 29  
06  
17, 18, 39, 40  
02, 43  
29  
15, 22, 30  
04, 44  
05, 06  
04, 05  
04, 05, 08  
04  
06, 07, 33  
01, 02, 10, 24  
23, 31  
14, 10  
20  
06, 11, 24  
01, 02, 03  
36  
12, 13, 38  
29  
04, 05, 08  
29  
15  
If your VCR model does not have the CHANNEL  
UP function on its remote control, it cannot be  
identified using the SEARCH method for  
identifying. For such models, please try the  
DIRECT ENTRY method of identifying.  
Be Patient: a minute or two can seem a lot longer  
when you’re waiting for something to happen, but  
the code should be identified within 2 minutes.  
Remember, it is only a one-time set-up.  
Be careful not to let the VCR scan more than five  
channels when the indicator starts to move up. If  
you continue holding down the  
CH a/s  
after five channel scans, the proper remote  
code can be passed up, and the two minutes  
identify cycle will have to be repeated.  
If a channel change does not occur on the VCR  
within two minutes, read the identifying instructions  
again and repeat the steps. Should a channel  
change still not occur the remote will not operate  
with the desired VCR.  
Sharp  
Shintom  
Sony  
Sound Design  
Sylvania  
Symphonic  
Tatung  
Teac  
15, 29  
27, 29  
29  
Teknika  
Thomas  
TMK  
21  
Toshiba  
Video Concepts  
Yamaha  
Zenith  
19, 20  
30  
15, 29, 30  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42  
Operation of Remote Control (Continued)  
POWER  
CATV  
DVD  
TV  
TV POWER  
CATV/DVD-TV/VCR  
VCR  
INPUT  
DISPLAY INPUT  
DISPLAY  
1
4
2
5
8
3
6
REMOTE  
KEYPAD  
7
9
FLASHBACK  
ENTER  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
CH  
8
VOL  
VOL  
+
;
:
–
9
CH  
CHANNEL UP (,)/  
DOWN(9)  
MENU  
MUTE  
g
SKIP  
f
9
VCR-CH  
8
POWER (DVD/VCR)  
PLAY  
:
POWER  
REC  
(DVD/VCR)  
REW  
(
FWD  
)
L
STOP  
PAUSE  
J
TV • CATV • VCR • DVD  
L HOWTO IDENTIFY A DVD  
REMOTE CONTROL  
CODE NUMBER  
DVD BRAND  
The remote control may already be set to  
operate your DVD. Try this initial check before  
going on to the following “identify” section.  
Denon  
JVC  
02  
09  
04  
04  
06  
02  
04  
08  
03  
03  
07  
01, 10  
05  
04  
02  
04  
Magnavox  
Marantz  
Mitsubishi  
Panasonic  
Philips  
Pioneer  
Proscan  
RCA  
Samsung  
Sharp  
Sony  
Toshiba  
Yamaha  
Zenith  
(1) Press CATV/DVD button.  
(2) Point remote towards DVD and press POWER  
(DVD/VCR).  
(3) Does the remote turn the DVD ON and OFF?  
• If yes, the remote is ready to operate the DVD  
and no further steps are needed.  
• If no, continue to the “identify” section.  
L To identify your DVD – Direct Entry Method.  
Use the following steps and list to quickly find  
the remote control code for your accessory  
DVD.  
• First look up your DVD’s remote control code  
number before going through the direct code  
entry steps control.  
Note:  
Depending on the model, year produced, brand,  
and type of DVD, some models may not be  
compatible with the remote control.  
(1) Press CATV/DVD button.  
(2) Press and hold down INPUT and  
CH s  
on your remote control.  
Then release both buttons.  
(3) Within ten seconds after releasing INPUT and  
, enter your DVDs two-digit remote  
CH s  
control code number using REMOTE  
KEYPAD (refer to list).  
• The remote control is now ready to send  
commands to your DVD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
Operation of Remote Control (Continued)  
L HOW TO IDENTIFY A CABLE CONVERTER  
CATV CONVERTER REMOTE CONTROL  
BRAND CODE NUMBER  
L To Identify Your Cable Converter –Direct  
Entry Method.  
Anvision  
07, 08  
Use the following steps and list to quickly find  
the remote control code for your cable TV  
converter.  
• First look up your converter’s remote code  
number before going through the direct code  
entry steps below.  
• If this procedure does not identify your  
converter, use the Search method for  
identification.  
Cable Star  
07, 08  
Eagle  
08  
General Instrument  
04, 05, 15, 23, 24, 25,  
30, 36  
Jerrold  
04, 05, 15, 23, 24, 25,  
30, 36  
Magnavox  
07, 08, 19, 25, 28, 29,  
32, 33, 40, 41  
18  
Oak Sigma  
Panasonic  
Philips  
27, 39  
07, 08, 19, 26, 28, 29,  
32, 33, 40, 41  
18, 20  
(1)Press CATV/DVD button.  
Pioneer  
CH s  
(2)Press and hold down DISPLAY and  
Randtek  
RCA  
07, 08  
27, 43  
on your remote control.  
Scientific Atlanta  
Sony  
Viewstar  
03, 22, 42  
44  
07, 08, 19, 26, 28, 29,  
32, 33, 40, 41  
14  
Then release both buttons.  
(3)Within ten seconds after releasing DISPLAY  
and , enter your converter’s two-  
CH s  
digit code number using REMOTE KEYPAD  
Zenith  
(refer to list).  
• The remote control is now ready to send  
commands to your converter.  
• Some brands have more than one remote code  
listed due to changes in the remote codes from  
early to later model years. In such cases, you  
may have to try more than one code to find the  
code your converter accepts.  
TIPS ON IDENTIFYING YOUR CABLE  
CONVERTER:  
Be Patient: a minute or two can seem a lot  
longer when you’re waiting for something to  
happen, but the code should be identified within  
2 minutes.Remember, it is only a one-time set-  
up.  
Be careful not to let the CATV converter scan  
more than five channels when the indicator  
starts to move up.If you continue holding down  
Note:  
Depending on the model, year produced, brand,  
and type of CATV converter, some models may  
not be compatible with the remote control.  
the DISPLAY and  
after five channel  
CH a  
scans, the proper remote code can be passed  
up, and the two minute identify cycle will have  
to be repeated.  
L To Identify Your Cable Converter – Search  
Method.  
(1)Press CATV/DVD button.  
(2)Press the POWER button on the cable  
converter to ON.  
(3)Stand at least six feet away from the converter.  
Point the remote towards the converter.  
If a channel change does not occur on the cable  
converter within two minutes, read the  
identifying instructions again and repeat the  
steps. Should a channel change still not occur,  
the remote will not operate with the desired  
converter.  
Hold down the DISPLAY and  
same time. KEEP HOLDING THE BUTTONS  
DOWN.  
at the  
CH a  
Note:  
(4)Watch the Channel Number indicator on the  
converter.  
Some satellite receivers can be operated by the  
REMOTE CONTROL. If you have a Satellite  
Receiver, you can use the above method to  
search for available channels.  
Channel numbers will scan up when the  
converter has been identified.  
Release the DISPLAY and CH a as soon  
as the channel numbers start to scan up.  
The converter’s remote control code number  
has been identified, and the remote is ready to  
operate the converter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
Before Calling for Service  
Check these items and see if you can correct the trouble with a slight adjustment of the controls.  
QUICK SERVICE  
CHECK LIST  
POSSIBLE REMEDY  
Try a new channel, if OK, then there  
X
X
X X  
X
X X  
X
X
X
X X X  
X
X X  
X
X
is a possible station trouble.  
Is TV plugged in? Power at outlet?  
Is TV’s POWER button on?  
X
X
X
X
X X  
X X  
X
X
X X  
X X  
X
X
X
X
X
X
X X X  
X X X  
X
X
X X  
X X  
X
X
X
X
Is antenna connected to terminal on  
the back of the set?  
X
X
X
X
X X  
X X  
X
X
X X  
X X  
X
X
X
X
X
X
X X X  
X X X  
X
X
X X  
X X  
X
X
X
X
If outside antenna is being used,  
check for broken wire.  
Check for local interference or  
external electrical noise.  
X
X
X
X
X X  
X X  
X
X
X X  
X X  
X
X
X
X
X
X
X X X  
X X X  
X
X
X X  
X X  
X
X
X
X
Turn off the POWER and then turn it  
on after about a minute.  
X
X
X
X
X X  
X X  
X
X
X X  
X X  
X
X
X
X
X
X
X X X  
X X X  
X
X
X X  
X X  
X
X
X
X
Adjust COLOR control.  
Adjust PICTURE control.  
Check external Video/Audio products:  
look for loose/broken connection  
leads. (Refer to pages 39–41)  
X
X
X X  
X
X X  
X
X
X
X X X  
X
X X  
X
X
X
X
X
X
X X  
X X  
X
X
X X  
X X  
X
X
X
X
X
X
X X X  
X X X  
X
X
X X  
X X  
X
X
X
X
Check batteries of Remote Control.  
Press TV/VCR button on the Remote  
to select TV mode.  
Are audio cables connected firmly?  
Check the volume level.  
X
X
X
X
X
X
X X  
X X  
X X  
X
X
X
X X  
X X  
X X  
X
X
X
X
X
X
X
X
X
X X X  
X X X  
X X X  
X
X
X
X
X
X
X
X
X
X
X X  
X X  
Is SPEAKER ON? See pages 13,14.  
Change Closed Caption mode to  
“OFF”/Energy Save mode to “OFF”.  
Unplug the TV and plug it in again  
after 2 minutes or longer.  
X
X
X X  
X
X X  
X
X
X
X X X  
X
X X  
X
X
Note:  
• If no TEXT broadcast is being received while viewing in the TEXT  
mode, the screen may become dark and blank for some programs.  
Should this occur, switch the Closed Caption mode to “OFF”.  
(Dark and Blank Picture)  
Calling for Service  
For location of the nearest Sharp Authorized Servicer, or to obtain product literature accessories, supplies,  
or customer assistance, please call 1-800-BE-SHARP.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
MODEL  
20F640  
NTSC  
Receiving System  
Stereo Broadcast  
Reception Channels  
AIR  
MTS/SAP  
VHF  
2-13 ch  
UHF 14-69 ch  
1-125 ch  
CATV  
Channel Tuning  
Antenna Input Impedance  
181-channel Reception PLL tuning system  
VHF/UHF 75 ohm Unbalanced  
Screen Size  
(Visible Area)  
21˝ Diagonally Measured  
(50.8 cm)  
Terminals  
Audio/Video input × 2 (Front x 1, Rear x 1),  
COMPONENT-IN × 1 (Rear), Audio Output × 1 (Rear)  
Sound Output  
2.5 W (RMS) × 2  
AC 120 V, 60 Hz  
90 W  
Power Source  
Power Consumption  
Dimensions  
(W) x (H) x (D)  
2325/64˝ × 181/2˝ × 193/32˝  
[594 mm × 470 mm × 485 mm]  
Weight (approx.)  
56.22 lbs. (25.5 kg)  
• Design and specifications are subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
(ESPAÑOL)  
Lea estas instrucciones cuidadosamente y consérvelas a la mano para consultarlas en el futuro.  
IMPORTANTE  
N° de modelo :  
Sírvase anotar el modelo del televisor y los números de serie  
en el espacio provisto, para ayudar a reportar en caso de  
pérdida o robo. Los números están ubicados en la parte  
posterior del televisor.  
N° de serie :  
INFORMACIÓN IMPORTANTE  
Existen dos razones importantes para registrar dentro del plazo límite la garantía de su nuevo televisor  
SHARP, mediante la TARJETA DE REGISTRO incluida con el aparato.  
PRIMERA – GARANTÍA  
Garantiza al cliente la recepción inmediata de todas las prestaciones de consumidor en cuanto a piezas, servicio  
técnico y mano de obra aplicable a su adquisición.  
SEGUNDA – ACTA DE SEGURIDAD DE PRODUCTOS DE CONSUMIDOR  
Con el fin de garantizar al cliente la recepción puntual de cualquier notificación de seguridad sobre inspección,  
modificación o cancelación que se le pueda solicitar a SHARP bajo el Acta de seguridad de productos de  
consumidor de 1972.LEA CUIDADOSAMENTE LA CLÁUSULA “GARANTÍA LIMITADA”DE LA ÚLTIMA PÁGINA.  
PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA  
ELÉCTRICA, NO EXPONGA ESTE APARATO A LA HUMEDAD.  
ADVERTENCIA :  
El relámpago con cabeza de  
flecha dentro de un triángulo trata  
de indicar al usuario que las partes  
dentro del producto representan  
riesgo de electrochoque para las  
personas.  
PRECAUCIÓN : PARA REDUCIR EL RIESGO DE  
El signo de exclamación dentro de  
DESCARGAS ELÉCTRICAS, NO RETIRE LA CUBIERTA  
un triángulo trata de indicar al  
(NI EL PANEL POSTERIOR).  
usuario que las instrucciones  
importantes de operación y  
servicio se encuentran en los  
documentos con el aparato.  
NO CONTIENE PIEZAS REPARABLES POR EL USUARIO.  
SOLICITE ASISTENCIA TÉCNICA A PERSONAL DE  
SERVICIO TÉCNICO ESPECIALIZADO.  
“Nota para el instalador del sistema de TV por cable: Esta nota tiene el propósito de llamar la atención del  
instalador del sistema de cable acerca del Artículo 820-40 del Código Eléctrico Nacional, que contiene las  
directrices para la puesta a tierra y, en particular, especifica que el cable de puesta a tierra debe estar  
conectado al sistema de puesta a tierra del edificio lo más cerca a la entrada del cable.”  
ADVERTENCIA-LasNormasdelaFCCestablecenquecualquiercambioomodificaciónnoautorizadaque  
se realice en este equipo y que no esté expresamente aprobado por el fabricante podría anular la autoridad  
del usuario para utilizar este equipo.  
DESECHO DEL PRODUCTO  
Este producto utiliza un Tubo de rayos catódicos (TRC) que contiene soldadura de estaño y plomo.  
El desecho de estos materiales deberá ser considerando regulaciones ambientales. Para obtener  
información sobre el desecho o el reciclado, póngase en contacto con las autoridades locales o con  
Electronics Industries Alliance: www.eiae.org  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMACIÓN IMPORTANTE (Continuación)  
PRECAUCIÓN:  
• No coloque el cable de alimentación de CA debajo del televisor u otro elemento pesado.  
• Para impedir un incendio, no ponga nunca ningún tipo de vela o llama al descubierto encima o cerca del  
televisor.  
• Para impedir un incendio o una descarga eléctrica, no exponga este aparato al goteo ni a las salpicaduras.  
Tampoco deberán ponerse encima de los productos objetos llenos de líquidos como, por ejemplo, floreros.  
MEDIDAS DE SEGURIDAD IMPORTANTES  
PRECAUCIÓN :  
Lea por favor todas estas instrucciones antes de poner en funcionamiento  
su televisor, y guárdelas para poder utilizarlas en el futuro.  
La energía eléctrica permite realizar muchas funciones útiles. Este aparato ha sido diseñado y fabricado para  
garantizar su seguridad física. Sin embargo, UNA UTILIZACIÓN INAPROPIADA PODRÍA SER LA CAUSA DE  
DESCARGAS ELÉCTRICAS O INCENDIOS. Para mantener el buen funcionamiento de este equipo y evitar  
problemas, siga las normas básicas indicadas a continuación cuando lo instale, utilice o repare.  
1.  
2.  
3.  
4.  
Desenchufe el televisor del tomacorriente antes de limpiarlo.  
No utilice líquidos ni aerosoles de limpieza. Para limpiar el televisor utilice un paño húmedo.  
No utilice accesorios que no los recomiende el fabricante del televisor porque podrían causar peligros.  
No utilice el televisor cerca del agua – por ejemplo, cerca de una bañera, lavado, fregadero o lavadora, en  
un sótano húmedo, cerca de una piscina, etc.  
5.  
No utilice este televisor sobre un carrito, un soporte o una mesa inestables. El televisor podría caerse  
causando serías heridas a niños o adultos, y, por supuesto, el aparato se estropearía. Ponga el televisor  
solamente sobre un carrito o soporte recomendado por el fabricante, o vendido junto con  
el televisor.  
6.  
La combinación de carrito y televisor debe moverse con mucho cuidado. Las paradas  
rápidas, la fuerza excesiva y las superficies irregulares pueden ser la causa de que la  
combinación de televisor y carrito se volteen.  
7.  
8.  
Cuando instale el televisor en una pared o en una estantería siga las instrucciones del  
fabricante, y utilice el kit de montaje aprobado por el fabricante.  
Las ranuras y aberturas de la caja y del panel posterior o inferior sirven para la ventilación del aparato, para  
que éste funcione bien y para evitar que se caliente.Estas aberturas no deben taparse nunca.Este televisor  
no debe colocarse en un lugar cerrado (como un estante para libros) si éste no dispone de la ventilación  
apropiada.  
9.  
Las aberturas no deben taparse nunca con un paño u otro material; y las aberturas del panel inferior no  
deben taparse tampoco colocando el televisor sobre una cama, sofá, alfombra u otra superficie similar.  
Este televisor no debe ponerse nunca cerca o encima de un radiador u otro aparato que produzca calor.  
10. Este televisor sólo debe funcionar con la fuente de corriente indicada en la etiqueta del fabricante. Si no  
está seguro acerca del tipo de corriente de su hogar, póngase en contacto con el concesionario de quien  
adquirió el televisor o con la compañía eléctrica local.  
En el caso de equipos de televisión diseñados para funcionar con baterías, consulte las instrucciones de  
uso.  
11. Como medida de seguridad, el equipo de televisión está equipado con un enchufe polarizado de dos hilos.  
El enchufe polarizado de dos hilos solamente calza de una sola manera en el tomacorriente.  
Si el enchufe no entra en el tomacorriente, pídale a un electricista que le coloque un tomacorriente nuevo.  
No modifique el enchufe porque anulará esta característica de seguridad.  
12. No permita que se apoye nada sobre el cable de alimentación. No ponga este televisor donde el cable  
pueda ser deformado por personas que caminen sobre él.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEDIDAS DE SEGURIDAD IMPORTANTES (Continuación)  
13. Cumpla con todos los avisos y las instrucciones marcados en el televisor.  
14.  
Si se conecta una antena exterior al televisor, asegúrese de que el sistema de antena esté conectado a  
tierra para obtener cierta protección ante los aumentos de voltaje y la acumulación de cargas estáticas.  
La sección 810 del Código Eléctrico Nacional ofrece información relacionada con la conexión a tierra  
correcta del poste y la estructura de apoyo, la conexión a tierra del cable de entrada a una unidad de  
descarga, el tamaño de los conductores de conexión a tierra, la ubicación de la unidad de descarga de  
antena, la conexión a los electrodos de conexión a tierra, y los requisitos para el electrodo de conexión a  
tierra.  
15. Para proteger aún más este televisor durante tormentas eléctricas o cuando se deje sin atender y sin  
utilizar durante largos periodos de tiempo, desenchufe el cable de alimentación del tomacorriente y  
desconecte la antena. Esto evitará que el aparato pueda estropearse debido a los relámpagos y la  
sobretensión en la línea de alimentación.  
16. Un sistema de antena exterior no debe ubicarse cerca de líneas de alimentación elevadas, ni cerca de  
luces eléctricas o circuitos de alimentación.Tampoco debe ubicarse donde pueda caer sobre tales líneas  
o circuitos de alimentación. Cuando instale un sistema de antena exterior, tenga muchísimo cuidado  
para no tocar las líneas o circuitos de alimentación porque el contacto podría causar un accidente mortal.  
17. No sobrecargue los tomacorrientes ni los cables de extensión porque esto podría causar un incendio o  
descarga eléctrica.  
18. No meta nunca ningún objeto en el interior del televisor porque podría tocar piezas con alta tensión o  
causar un cortocircuito con otras piezas causando un incendio o descarga eléctrica. No derrame nunca  
ningún tipo de líquido sobre el televisor.  
19. No trate de reparar el televisor usted mismo porque al abrir o quitar las tapas podría exponerse a una  
descarga de tensión u otros peligros.Las reparaciones debe realizarlas el personal de servicio CALIFICADO.  
20. Desenchufe este televisor del tomacorriente y solicite el servicio de un técnico calificado cuando se  
produzcan las condiciones siguientes:  
A. Cuando el cable de la alimentación o el enchufe estén estropeados.  
B. Cuando haya derramado un líquido sobre el televisor.  
C. Si el televisor ha quedado expuesto a la lluvia o al agua.  
D. Si el televisor no funciona normalmente siguiendo las instrucciones de utilización. Ajuste solamente  
los controles indicados en las instrucciones de utilización. Un ajuste inadecuado de otros controles  
podría estropear el aparato y, entonces, sería necesario acudir a un técnico CALIFICADO para que  
éste lo repare y lo devuelva a su condición normal.  
E. Si el televisor se ha caído o la caja se ha estropeado.  
F. Cuando las prestaciones del televisor cambien considerablemente será necesario llamar al servicio  
de reparaciones.  
21. Al finalizar cualquier servicio o reparación de este televisor, pida al técnico de servicio que realice  
comprobaciones de seguridad rutinarias para determinar si el televisor puede funcionar sin causar ningún  
problema.  
22. Cuando sea necesario cambiar piezas, cerciórese de que el técnico de servicio utiliza las piezas de  
CAMBIO especificadas por el fabricante, aquellas que tengan las mismas características que las piezas  
originales. Las piezas de recambio no autorizadas pueden causar incendios, descargas eléctricas u  
otros peligros.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Referencia rápida de los controles de operación  
Nombres de los componentes  
Panel Delantero  
(ESPAÑOL)  
•
POR DENTRO DE LA  
PUERTA  
ALIMENTACION (POWER)  
Pulsando → Enciende (On).  
Pulsando nuevamente → Apaga  
(Off).  
TERMINALES  
DE  
ENTRADAVIDEO/AUDIO  
IN 2  
SENSOR DE  
CONTROL REMOTE  
MENU (MENU)  
AUMENTO/DISMINUCION DEL CANAL SUPERIOR/INFERIOR  
Pulsando → Accede al MENU PRINCIPAL.  
Pulsando nuevamente → Sale del MENU  
PRINCIPAL.  
VOLUMEN (VOL)  
(a) Selecciona el siguiente canal superior.  
(k) Aumenta el sonido.  
(l) Disminuye el sonido.  
(s) Selecciona el siguiente canal inferior.  
Para abrir la puerta  
Utilizando el saliente situado debajo de la indicación  
“PULL-OPEN”, tire de la puerta y levántela para abrirla.  
Para cerrar la puerta  
Utilizando el saliente, baje la puerta hasta que se cierre.  
Precaución:  
• Cuando abra o cierre la puerta, no inserte los dedos en la  
ranura entre la puerta y el panel frontal. Esto podría  
producirle una lesión.  
Panel Posterior  
IN  
1
C
O
MP  
O
N
E
NT  
L
INE  
T
Y
R
U
L
O
U
A
D
I
O
P
P
B
R
R
L
V
I
D
E
IN  
1
C
OMP ONE NT  
L INE  
OUT  
Y
R
A
UDIO  
L
P
P
B
R
R
L
V
IDE  
O
TERMINALES LINE OUT (AUDIO)  
TERMINALES IN 1 (VÍDEO/AUDIO)  
TERMINAL DE ENTRADA DE  
ANTENA/TV POR CABLE  
TERMINALES DE VÍDEO  
COMPONENTE  
Nota:  
• Las ilustraciones del televisor y del mando a distancia, y las indicaciones en pantalla, de este manual pueden  
diferir de su aspecto real.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Referencia rápida de los controles de operación  
Funciones Básicas Del Control Remoto  
Ventanilla del transmisor de infrarrojos  
ALIMENTACION (POWER)  
Pulsando → Enciende (On).  
Botones CATV/DVD-TV/VCR MODE  
Pulsando nuevamente → Apaga (Off).  
Pulse TV/VCR → Las señales enviadas serán  
para el control del televisor  
videograbadora.  
y
de la  
TECLADO A DISTANCIA  
(REMOTE KEYPAD)  
Para tener acceso a cualquier canal  
empleando las teclas.  
Pulse CATV/DVD → Las señales enviadas serán  
para el control del Convertidor de TV por cable y  
de la Reproductor de DVD.  
POWER  
CATV  
DVD  
TV  
VCR  
RETORNO AL CANAL  
ANTERIOR (FLASHBACK)  
Para volver al canal anterior.  
DISPLAY INPUT  
VISUALIZACION (DISPLAY)  
Pulsando → Aparece el canal de recepción por 4  
segundos.  
1
4
2
5
8
3
6
PREFERENCIAS PERSONALES  
Con los botones Personal Preference puede  
programar sus programas favoritos utilizando  
las cuatro categorías A, B, C y D.  
Puede acceder a los canales rápidamente  
utilizando estos botones (consulte la página  
33).  
Pulsando nuevamente → Elimina la visualización.  
7
9
FLASHBACK  
ENTER  
•
En el modo de “Closed Caption”se muestra el  
canal de recepción por un  
corto tiempo.  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
CH  
8
ENTRADA (INPUT)  
VOL  
VOL  
+
Pulsando → Cambia al modo de entrada 1 del  
;
:
–
9
CH  
vídeo externo.  
AUMENTO/DISMINUCION DEL  
VOLUMEN (VOLUME UP/DOWN)  
Pulsando 2 veces → Cambia al modo de entrada  
2 del vídeo externo.  
MENU  
MUTE  
g
SKIP  
f
(
(
k
) Aumenta el sonido.  
9
VCR-CH  
8
POWER (DVD/VCR)  
Pulsando 3 veces → Cambia al modo de entrada  
3 del vídeo externo o al modo COMPONENT.  
Pulsando 4 veces → Vuelve al modo TV original  
(consulte la página 38).  
l
) Disminuye el sonido.  
PLAY  
:
•
Cambia o selecciona los ajustes de TV en la  
visualización en pantalla.  
REC  
REW  
(
FWD  
)
L
STOP  
PAUSE  
J
PREPARACION (MENU)  
Pulsando → Accede al MENU PRINCIPAL.  
Pulsando nuevamente → Sale del MENU  
PRINCIPAL.  
INTRODUCIR (ENTER)  
Se utiliza en algunos casos en los cuales una  
Caja de Inversor de Cable requiere una orden  
“enter” después de seleccionar los canales, al  
usar el teclado a distancia (consulte la página 40).  
TV • CATV • VCR • DVD  
SILENCIAMIENTO (MUTE)  
Pulsando → Silencia el sonido.  
Pulsando nuevamente → Restaura el sonido.  
•
Cuando se silencia el sonido, CLOSED  
CAPTION aparece si se encuentra dispo-  
nible.  
CANAL SUPERIOR/INFERIOR  
(CHANNEL UP/DOWN)  
(a) Selecciona el siguiente canal superior.  
(s) Selecciona el siguiente canal inferior.  
•
Consulte las páginas 30-32 para obtener  
ALIMENTACION (DVD/VCR) [POWER  
(DVD/VCR)]  
Pulsando → Enciende (On).  
Pulsando nuevamente → Apaga (Off).  
información sobre el preajuste de canales.  
•
En el modo de MENU, mueve la marca “  
E”.  
SKIP/VCR-CH  
(consulte la página 40).  
CONTROLES DEL DVD/VIDEO  
(consulte la página 40).  
REC  
(consulte la página 40).  
Nota:  
•
Los botones que arriba pueden verse sombreados en el Control Remoto lucen en la oscuridad. Para usar el visor del  
control remoto que luce en la oscuridad, colocarlo bajo una luz fluorescente u otra fuente luminosa.  
•
•
•
•
•
El material fosforescente no contiene elementos radiactivos ni tó xicos, de modo que su uso no representa ningú n peligro.  
El grado de iluminació n variará de acuerdo con la potencia de la luz utilizada.  
El grado de iluminació n irá decayendo con el tiempo y dependiendo de la temperatura.  
El tiempo necesario para cargar el visor fosforescente variará de acuerdo con la iluminació n circundante.  
La luz del sol y la luz fluorescente son las má s eficaces para la carga del visor.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Antes de llamar al servicio de reparaciones  
Verifique estos puntos para ver si usted mismo puede solucionar el problema.  
LISTA DE  
COMPROBACIONES  
DE SERVICIO  
RAPIDO  
POSIBLE SOLUCIÓN  
Pruebe con otro canal y si todo está  
bien, el problema puede ser de la  
emisora.  
X
X
X X  
X
X X  
X
X
X X X X  
X
X X  
X
X
Está conectado el televisor?  
X
X
X
X
X
X
X X  
X X  
X X  
X
X
X
X X  
X X  
X X  
X
X
X
X
X
X
X X X X  
X X X X  
X X X X  
X
X
X
X X  
X X  
X X  
X
X
X
X
X
X
Llega electricidad al tomacorrientes?  
Está conectado el interruptor del  
televisor?  
Está conectado la antena al terminal del  
panel posterior del televisor?  
Si utiliza una antena exterior, cerciórese  
de que el cable no esté dañado.  
X
X
X
X
X X  
X X  
X
X
X X  
X X  
X
X
X
X X X X  
X
X
X X  
X X  
X
X
X
X
Compruebe si hay interferencia local.  
XX X X X X  
Desconecte el interruptor POWER y  
vuelva a conectarlo después de  
transcurrir un minuto.  
X
X
X X  
X
X X  
X
X
X X X X  
X
X X  
X
X
Ajuste el control de COLOR.  
Ajuste el control de MATIZ.  
X
X
X
X
X X  
X X  
X
X
X X  
X X  
X
X
X
X
X X X X  
X X X X  
X
X
X X  
X X  
X
X
X
X
Verifique los productos externos de  
Video/Audio, revise si hay fugas de  
conexiones sueltas o rotas.  
X
X
X X  
X
X X  
X
X
X X X X  
X
X X  
X
X
Compruebe el estado de las pilas del  
mando a distancia.  
X
X
X
X
X X  
X X  
X
X
X X  
X X  
X
X
X
X
X X X X  
X X X X  
X
X
X X  
X X  
X
X
X
X
Deslice CATV/DVD-TV/VCR selector  
para situarlo sobre la posición TV.  
Están bien conectados los cables de  
X
X
X
X
X X  
X X  
X
X
X X  
X X  
X
X
X
X
X X X X  
X X X X  
X
X
X
X
X
X
X
sonido? Compruebe el nivel del volumen.  
Está conectado el altavoz?  
X X  
Desactive (OFF) el modo CLOSED  
CAPTION / Desactive (OFF) el modo  
Ahorro de Energía (Energy Save).  
X
X
X
X
X X  
X X  
X
X
X X  
X X  
X
X
X
X
X X X X  
X X X X  
X
X
X X  
X X  
X
X
X
X
Desenchufe el televisor y vuelva a  
enchufarlo después de dos minutos o más.  
Nota:  
• Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la  
pantalla puede ponerse en blanco y negro. Si ocurriera esto, ponga el  
modo CLOSED CAPTION en OFF.  
(Imagen oscura y en blanco)  
Solicitud de servicio técnico  
Para la localización del Servicio Técnico Autorizado de Sharp más próximo o para conseguir material de  
información, repuestos o asistencia técnica, llame a 1-800-BE-SHARP.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(FRANÇAIS)  
Lisez attentivement ces instructions et gardez-les à proximité pour toute référence ultérieure.  
IMPORTANT  
N° du modèle :  
N° de série :  
Afin de vous aider en cas de perte ou de vol, inscrivez les  
numéros de série et de modèle du téléviseur dans les  
espaces fournis à cet effet. Ces numéros sont situés à  
l’arrière du téléviseur.  
INFORMATIONS IMPORTANTES  
Deux raisons importantes d’enregistrer rapidement la garantie de votre nouveau téléviseur SHARP à  
l’aide de la carte d’enregistrement (REGISTRATION CARD) incluse dans le colis :  
LA PREMIERE – LA GARANTIE  
Grâce à elle, vous obtiendrez immédiatement les avantages client concernant la garantie des pièces, du  
service et des travaux applicable à votre achat.  
LA DEUXIEME – LA LOI SUR LA SECURITE DU PRODUIT DE CONSOMMATION (CONSUMER  
PRODUCT SAFETY ACT)  
Grâce à elle, vous recevrez rapidement un avis de sécurité lors du contrôle, de la modification ou du rappel de votre  
produit que SHARP peut être amené à fournir conformément à la loi de 1972 sur la sécurité du produit de consommation.  
LISEZ ATTENTIVEMENT LE PARAGRAPHE «GARANTIE LIMITEE» DE LA DERNIÈRE PAGE.  
POUR REDUIRE LE RISQUE D’INCENDIE OU D’ELECTROCUTION,  
N’EXPOSEZ PAS CET EQUIPEMENT A DES ENDROITS TRES HUMIDES.  
AVERTISSEMENT:  
Le symbole de la foudre sous  
forme de flèche dans un triangle  
est supposé indiquer  
à
l’utilisateur que les pièces  
internes au produit constituent  
un risque d’électrocution.  
ATTENTION : POUR REDUIRE LE RISQUE  
D’ELECTROCUTION,  
NE RETIREZ PAS LE CAPOT (OU LE PANNEAU ARRIERE).  
L’APPAREIL NE CONTIENT AUCUNE PIECE A ENTRETENIR  
PAR L’UTILISATEUR.  
Le symbole du point d’exclamation  
dans un triangle est supposé  
indiquer à l’utilisateur que des  
instructions de fonctionnement et  
de maintenance importantes se  
trouvent dans la documentation  
fournie avec l’équipement.  
CONSULTEZ UN PERSONNEL QUALIFIE POUR  
LA MAINTENANCE.  
“Note à l’intention de l’installateur du système CATV :Ce rappel est fourni afin d’attirer l’attention de l’installateur  
de système CATV sur l’article 820-40 du National Electrical Code qui indique les règles de mise à la terre  
appropriée et, en particulier, spécifie que la ligne de terre doit être connectée au réseau commun de mise à  
la terre du bâtiment, au point le plus proche possible de la source.”  
AVERTISSEMENT - Les réglementations FCC établissent que des changements ou des modifications non  
autorisés sur cet équipement et non approuvés expressément par le fabricant peuvent annuler tout pouvoir  
de l’utilisateur sur le fonctionnement de cet équipement.  
MISE AU REBUT DU PRODUIT  
Ce produit utilise un tube à rayons cathodiques (TRC) contenant du plomb à braser et du brasage tendre.  
La mise au rebut de ces matières peut être réglementée pour des raisons environnementales. Pour toute  
information sur la mise au rebut ou le recyclage, contactez les autorités locales ou les précautions importantes  
préconisées par la société Electronics Industries Alliance sur : www.eiae.org.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATIONS IMPORTANTES (Suite)  
ATTENTION:  
• Ne placez pas le cordon d’alimentation sous le téléviseur ou sous tout autre objet lourd.  
• Ne placez pas de bougies ni de flammes nues sur le téléviseur ou à sa proximité, afin d’éviter les incendies.  
• Veillez à ne pas éclabousser ni faire tomber de l’eau sur ces appareils afin d’éviter les incendies ou les  
électrocutions. Ne placez jamais d’objets remplis de liquide, comme des vases, sur ces appareils.  
PRÉCAUTIONS IMPORTANTES  
ATTENTION :Veuillez lire toutes ces instructions avant d’utiliser votre télévision et conservez-  
les pour un usage ultérieur.  
L’énergie électrique peut exécuter de nombreuses fonctions utiles. Cet appareil a été conçu et fabriqué de façon  
à garantir votre entière sécurité. CEPENDANT, TOUTE UTILISATION INADEQUATE PEUT ENTRAINER DES  
RISQUES D’ELECTROCUTION OU D’INCENDIE.Afin de ne pas détruire les protections intégrées à cet appareil,  
respectez les règles de base suivantes pour son installation, son utilisation et sa maintenance.  
1.  
2.  
3.  
4.  
Débranchez la télévision avant de la nettoyer.  
N’utilisez pas de nettoyants liquides ou d’aérosols et utilisez un chiffon humide.  
N’utilisez pas d’accessoires déconseillés par le fabricant de matériel vidéo, car ils impliquent des risques.  
N’utilisez pas cette télévision à proximité d’eau — par exemple, près d’une baignoire, d’un lavabo, d’un  
évier ou d’un bac à laver, dans une cave humide ou près d’une piscine, etc.  
5.  
Ne placez pas cet équipement sur un chariot, un support ou une table instable. La télévision peut tomber  
et provoquer de graves lésions à toute personne et causer de sérieux dommages à l’équipement. Utilisez  
uniquement un support ou un chariot recommandé par le fabricant ou vendu avec la  
télévision.  
6.  
7.  
8.  
L’ensemble télévision-chariot doit être déplacé délicatement. Les arrêts brusques, une  
force excessive et des surfaces inégales peuvent renverser l’ensemble.  
L’installation au mur ou sur une tablette doit être réalisée conformément aux instructions  
du fabricant et à l’aide d’un kit de montage approuvé par ce dernier.  
Les fentes et les ouvertures du châssis à l’arrière ou dans la partie inférieure sont prévus pour la ventilation.  
Pour garantir un fonctionnement fiable de la télévision et pour la protéger de toute surchauffe, ces ouvertures  
ne doivent être ni obturées, ni recouvertes. La télévision ne doit pas être placée dans un endroit encastré  
tel qu’une bibliothèque, sauf si une ventilation adéquate est prévue.  
9.  
Les ouvertures ne doivent jamais être recouvertes par un chiffon ou autre et celles de la partie inférieure  
ne doivent jamais être obturées si vous placez la télévision sur un lit, un sofa, un tapis ou toute surface  
similaire. Cette télévision ne doit être placée ni à proximité d’un radiateur ou d’un registre de chaleur, ni  
dessus.  
10. Cette télévision doit être alimentée uniquement par le type d’alimentation électrique indiqué sur l’étiquette.  
Si vous n’êtes pas sûr du type d’alimentation de votre domicile, consultez votre revendeur de télévision  
ou la compagnie d’électricité locale (EDF en France).  
Pour la télévision conçue pour fonctionner sur batterie, reportez-vous au mode d’emploi.  
11. Du point de vue de la sécurité, la télévision est équipée d’une fiche polarisée à 2 fils (une lame plus  
importante que l’autre). La fiche polarisée à 2 fils ne pénètre dans la prise électrique que dans un seul  
sens.  
Si la fiche ne correspond pas à la prise, demandez à votre électricien de remplacer la prise, elle doit être  
obsolète. Ne modifiez pas la fiche et ne désactivez pas cette fonction de sécurité.  
12. Ne posez rien sur le cordon d’alimentation. Ne placez pas la télévision dans un emplacement où le  
cordon d’alimentation est susceptible d’être endommagé par le passage répété de personnes.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRÉCAUTIONS IMPORTANTES (suite)  
13. Respectez tous les avertissements et instructions mentionnés sur la télévision.  
14. Si une antenne extérieure est raccordée à la télévision, veillez à ce que le système d’antenne soit relié à  
la terre de façon à fournir une protection vis-à-vis des poussées de tension et des charges électrostatiques  
accumulées. La section 810 du National Electrical Code fournit des informations relatives à une mise à la  
terre correcte de la potence et de la structure portante, à une mise à la terre du fil d’entrée à une unité de  
décharge d’antenne, aux dimensions des conducteurs de terre, à l’emplacement de l’unité de décharge  
d’antenne, au raccordement des prises de terre ainsi qu’à leurs exigences.  
EXEMPLE DE MISE À LA TERRE D’UNE ANTENNE  
SELON LE CODE NATIONAL DE L’ÉLECTRICITÉ  
DESCENTE  
D’ANTENNE  
COLLIER DE MISE  
À LA TERRE  
UNITÉ DE DÉCHARGE  
D’ANTENNE  
BOÎTIER DE  
(NEC SECTION 810-20)  
LA COMPAGNIE  
D’ÉLECTRICITÉ  
CONDUCTEURS DE TERRE  
(NEC SECTION 810-21)  
COLLIERS DE MISE À LA TERRE  
ÉLECTRODE DE TERRE DE  
LA COMPAGNIE D’ÉLECTRICITÉ  
(NEC ART. 250, PARTIE H)  
NEC – CODE NATIONAL DE L’ÉLECTRICITÉ  
15. Pour tout ajout de protection à votre télévision en cas de foudre ou lorsque elle reste en veille et inutilisée  
pendant de longues périodes, débranchez-la et déconnectez l’antenne.Vous éviterez ainsi des dommages  
à votre équipement suite à la foudre et des poussées de tension.  
16. Un système d’antenne extérieure ne doit pas être situé à proximité de lignes aériennes ou d’autres  
groupes électrogènes ou circuits électriques ou dans des emplacements où l’antenne pourrait tomber sur  
ce type de lignes ou circuits. Lors de l’installation d’un système d’antenne extérieure, faites extrêmement  
attention à ne pas entrer en contact avec ces lignes ou circuits, car cela pourrait vous être fatal.  
17. Ne surchargez pas les prises et les prolongateurs de ligne afin d’éviter tout risque d’incendie ou  
d’électrocution.  
18. N’introduisez jamais d’objets à travers les fentes du châssis, car ils pourraient entrer en contact avec des  
points de tension dangereux ou des pièces court-circuitées et provoquer ainsi un incendie ou une  
électrocution. Ne répandez jamais de liquides sur la télévision.  
19. N’essayez pas de réparer vous-même votre télévision. L’ouverture ou le retrait des capots peut vous  
exposer à une tension dangereuse ou à d’autres risques. Confiez toutes les opérations de maintenance  
à un personnel qualifié.  
20. Lorsque vous êtes confronté aux situations suivantes, débranchez la télévision et confiez toutes les  
opérations de maintenance à un personnel qualifié :  
A. lorsque le cordon d’alimentation ou la fiche est endommagé ou effiloché ;  
B. si du liquide a été répandu sur/dans la télévision ;  
C. si la télévision a été exposée à la pluie ou à l’eau ;  
D. si la télévision ne fonctionne pas normalement même en respectant le mode d’emploi. Réglez  
uniquement les commandes abordées par le mode d’emploi. Des réglages inappropriés d’autres  
commandes peuvent occasionner des dommages et nécessiteront ensuite, dans la plupart des cas,  
une intervention plus importante d’un technicien qualifié pour que la télévision fonctionne  
normalement ;  
E. si la télévision a été renversée ou que le châssis est endommagé ;  
F. lorsque la télévision présente une altération visible des performances — cela indique un besoin de  
maintenance.  
21. Pour toute maintenance ou réparation de la télévision, demandez au technicien de réaliser des contrôles  
de sécurité classiques afin de déterminer si la télévision est en bon état de marche.  
22. Lorsqu’un remplacement de pièces se révèle nécessaire, veillez à ce que le technicien utilise des pièces  
de rechange spécifiées par le fabricant et qu’elles aient les mêmes caractéristiques que la pièce d’origine.  
Des remplacements non autorisés peuvent occasionner un incendie, une électrocution ou d’autres risques.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Référence rapide sur les commandes  
Nomenclature  
Panneau Avant  
(FRANÇAIS)  
•
DERRIERE LE VOLET  
ALIMENTATION (POWER)  
Appuyer → Pour mettre sous tension.  
Appuyer de nouveau → Pour mettre  
hors tension.  
PRISES D’ENTRÉE  
VIDÉO/AUDIO  
CAPTEUR DE TÉLÉCOMMANDE  
RÈGLAGE (MENU)  
Appuyer → Pour mettre sous tension.  
Appuyer de nouveau → Pour mettre hors  
tension.  
AUGMENTATION/RÉDUCTION  
DU VOLUME SONORE (VOL)  
Canal HAUT/BAS  
(a) Sélectionne le canal supérieur suivant.  
(k) Pour augmenter le volume du son. (s) Sélectionne le canal inférieur précédent.  
(l) Pour diminuer le volume du son.  
Pour ouvrir le volet  
A l’aide de la saillie située sous l’indication "PULL-OPEN", tirez  
et soulevez pour ouvrir le volet.  
Pour fermer le volet  
A l’aide de la saillie, rabaissez le volet jusqu’à ce qu’il se ferme.  
Attention:  
• Lors de l’ouverture ou de la fermeture du volet, n’introduisez pas  
les doigts dans la fente entre la porte et le panneau avant sous  
peine de provoquer un accident.  
Panneau arrière  
IN  
1
C
O
MP  
O
N
E
NT  
L
INE  
T
Y
R
U
L
O
U
A
D
I
O
P
P
B
R
R
L
V
I
D
IN  
1
C
OMP ONE NT  
L INE  
OUT  
Y
R
A
UDIO  
L
P
P
B
R
R
L
V
IDE  
O
PRISES AUDIO LINE OUT  
PRISES D’ENTRÉE IN 1 (VIDÉO-  
AUDIO)  
PRISE D’ENTRÉE ANTENNE/CÂBLE  
PRISES POUR APPAREIL VIDÉO  
Remarque:  
• Les illustrations du téléviseur et de la télécommande ainsi que les affichages à l’écran dans ce mode d’emploi  
diffèrent de la réalité.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Référence rapide sur les commandes  
Fonctions de base de la télécommande  
Fenêtre d’émission du signal infrarouge  
ALIMENTATION (POWER)  
Appuyer  
→
Pour mettre sous tension.  
Touches de mode CATV/DVD-TV/VCR  
Appuyer sur la touche TV/VCR → Les signaux  
envoyés sont destinés à commander le téléviseur et  
le magnétoscope.  
Appuyer de nouveau → Pour mettre hors  
tension.  
PAVE NUMERIQUE DE COMMANDE A  
DISTANCE (REMOTE KEYPAD)  
Sélectionne directement le canal voulu sur le  
pavé numérique.  
Appuyer sur la touche CATV/DVD → Les signaux  
envoyés sont destinés  
à
commander le  
POWER  
CATV  
DVD  
TV  
Convertisseur de télévision par câble et le  
magnétoscope.  
VCR  
RETOUR (FLASHBACK)  
Rappelle le canal regardé précédent.  
DISPLAY INPUT  
1
4
2
5
8
3
6
AFFICHAGE (DISPLAY)  
Appuyer pour afficher le canal reçu pendant  
quatre secondes.  
PREFERENCES PERSONNELLES  
Grâce aux touches de préférence  
personnelle,  
vous pouvez programmer vos programmes  
préférés à l’aide des 4 catégories:  
A, B, C et D. Ces touches vous permettent  
d’accéder rapidement à ces canaux. (Voir  
page 33)  
Appuyer de nouveau pour faire disparaître  
le canal.  
7
9
FLASHBACK  
ENTER  
•
Pour afficher temporairement le canal reçu  
en mode Sous-titres.  
0
100  
D
PERSONAL PREFERENCE  
B
A
C
CH  
8
ENTRÉE (INPUT)  
VOL  
VOL  
+
;
:
Appuyer  
→
Pour sélectionner le mode  
–
9
CH  
ENTRÉE 1 vidéo externe.  
AUGMENTATION/RÉDUCTION DU  
VOLUME SONORE (VOLUME UP/  
DOWN)  
Appuyer 2 fois → Pour sélectionner le mode  
MENU  
MUTE  
g
SKIP  
f
ENTRÉE 2 vidéo externe.  
9
VCR-CH  
8
POWER (DVD/VCR)  
Appuyer 3 fois → Pour sélectionner le mode  
(
k
) Pour augmenter le volume du son.  
) Pour diminuer le volume du son.  
Modifie ou sélectionne les réglages TV  
sur l’affichage sur écran.  
PLAY  
:
ENTRÉE  
3
vidéo externe ou le mode  
(
l
REC  
COMPOSANT.  
•
REW  
(
FWD  
)
Appuyer 4 fois → Pour revenir au mode TV  
L
STOP  
initial (Voir page 38).  
PAUSE  
J
RÉGLAGE (MENU)  
Appuyer → Accès au MENU PRINCIPAL.  
Appuyer de nouveau → Sortie du MENU  
PRINCIPAL.  
ENTRER (ENTER)  
Parfois utilisée lorsqu’un convertisseur nécessite  
l’introduction d’une commande “enter” après la  
sélection de canaux à l’aide du pavé numérique  
de commande à distance. (Voir page 40)  
TV • CATV • VCR • DVD  
SOURDINE (MUTE)  
Appuyer → Mise en sourdine du son.  
Appuyer de nouveau → Rétablissement du  
son.  
Lorsque le son est coupé, SOUS-TITRE  
apparaît si la fonction est disponible.  
TOUCHES DES CANAUX CROISSANT/  
DÉCROISSANT (CHANNEL UP/DOWN)  
(a) Sélectionne le canal supérieur suivant.  
(s) Sélectionne le canal inférieur précédent.  
•
•
•
Voir pages 30-32 pour prérégler les canaux.  
ALIMENTATION (DVD/VCR) [POWER  
(DVD/VCR)]  
Appuyer → Pour mettre sous tension.  
Appuyer de nouveau → Pour mettre hors  
tension.  
Déplace le curseur “  
MENU.  
E” sur l’écran du  
SKIP/VCR-CH  
(Voir page 40)  
COMMANDE DU LECTEUR DE  
DVD/MAGNÉTOSCOPE  
(Voir page 40)  
REC  
(Voir page 40)  
Remarque:  
•
Les boutons ombré s de la té lé commande illustré s ci-dessus brillent dans l’obscurité lorsque la té lé commande a  
té placé e sous une ampoule fluorescente ou toute autre source lumineuse.  
é
•
•
•
•
•
Le maté riau phosphorescent n’est absolument pas toxique ou radioactif. Il peut donc ê tre utilisé en toute sé curité .  
Le degré d’illumination variera en fonction de l’intensité de la source d’é clairage.  
Le degré d’illumination diminuera avec le temps, en fonction de la tempé rature.  
Le temps requis pour charger les touches phosphorescentes dé pendra de l’é clairage environnant.  
Les rayons directs du soleil et les luminaires fluorescents constituent les meilleures sources de chargement des  
touches phosphorescentes.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Avant d’appeler un réparateur  
Vérifier les points suivants afin de déterminer s’il est possible de remédier au problème par un simple réglage des commandes.  
LISTE DES  
VÉRIFICATIONS  
POUR UN  
DÉPANNAGE  
RAPIDE  
SOLUTION POSSIBLE  
Essayer un nouveau canal. S’il fonctionne, il s’agit  
probablement d’une panne de la chaîne.  
X
X
X
X
X X  
X X  
X
X
X X  
X X  
X
X
X
X
X
X
X X X  
X X X  
X
X
X
X
X
Le téléviseur est-il branché?  
La prise secteur fonctionne-t-elle?  
X X  
X
L’interrupteur POWER du téléviseur est-il sous  
tension?  
X
X
X
X
X X  
X X  
X
X
X X  
X X  
X
X
X
X
X
X
X X X  
X X X  
X
X
X X  
X X  
X
X
X
X
L’antenne est-elle raccordée aux bornes à l’arrière  
de l’appareil?  
Si l’antenne extérieure est utilisée, s’assurer qu’il  
n’y a pas de fils sectionnés.  
X
X
X
X
X
X
X X  
X X  
X X  
X
X
X
X X  
X X  
X X  
X
X
X
X
X
X
X
X
X
X X X  
X X X  
X X X  
X
X
X
X X  
X X  
X X  
X
X
X
X
X
X
Vérifiers’iln’yapasd’interférencelocaleoudebruit  
électrique extérieur.  
Mettre l’interrupteur POWER hors tension puis de  
nouveau sous tension au bout d’une minute.  
X
X
X
X
X X  
X X  
X
X
X X  
X X  
X
X
X
X
X
X
X X X  
X X X  
X
X
X X  
X X  
X
X
X
X
Régler la commande de COULEUR.  
Régler la commande de CONTRASTE.  
Vérifier l’appareil vidéo/audio externe : s’assurer  
que les câbles de connexion ne sont pas desserrés  
ou cassés.  
X
X
X X  
X
X X  
X
X
X
X X X  
X
X X  
X
X
Vérifier les piles de la télécommande.  
X
X
X
X
X X  
X X  
X
X
X X  
X X  
X
X
X
X
X
X
X X X  
X X X  
X
X
X X  
X X  
X
X
X
X
Appuyez sur la touche TV/VCR de la télécommande  
pour sélectionner le mode TV.  
Les câbles audio sont-ils fermement connectés?  
Vérifier le niveau du volume.  
X
X
X
X
X
X
X X  
X X  
X X  
X
X
X
X X  
X X  
X X  
X
X
X
X
X
X
X
X
X
X X X  
X X X  
X X X  
X
X
X
X
X
X
X
X
X
X
Les haut-parleurs fonctionnent-ils?  
X X  
X X  
Mettre le mode sous-titrage hors service “ARRÊT”  
Mode d’économie d’énergie sur “ARRÊT”.  
Débrancherletéléviseuretlerebrancheraprèsdeux  
minutes.  
X
X
X X  
X
X X  
X
X
X
X X X  
X
X X  
X
X
Remarque:  
• En mode TEXTE, s’il n’y a pas d’émission TEXTE à recevoir, l’écran  
du téléviseur pourrait être sombre et vide. Dans ce cas, placer le  
mode Sous-titrage hors service.  
(Image sombre et vide)  
Appel au service après-vente  
Pour connaître l’emplacement du centre de service après-vente agréé Sharp le plus proche ou pour  
obtenir de la documentation sur les produits, des accessoires, des consommables ou une aide au  
consommateur, appelez le 1-800-BE-SHARP.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty  
CONSUMER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp  
brand product (the “Product”), when shipped in its original container, will be free from defective  
workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the  
defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser  
for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product nor to the additional excluded  
item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which  
has been subjected to improper voltage or other misuse, abnormal service or handling, or which has  
been altered or modified in design or construction.  
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth  
below and provide proof of purchase to the servicer.  
The limited warranty described herein is in addition to whatever implied warranties may be granted to  
purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE  
OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied  
warranty lasts, so the above limitation may not apply to you.  
Neither the sales personnel of the seller nor any other person is authorized to make any warranties  
other than those described herein, or to extend the duration of any warranties beyond the time period  
described herein on behalf of Sharp.  
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be  
the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the  
period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of  
Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims,  
whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable or in  
any way responsible, for any damages or defects in the Product which were caused by repairs or attempted  
repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way  
responsible for any incidental or consequential economic or property damage. Some states do not allow  
the exclusion of incidental or consequential damages, so that above exclusion may not apply to you.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.YOU MAY ALSO HAVE OTHER RIGHTS  
WHICH VARY FROM STATE TO STATE.  
Model Specific Section  
Your Product Model Number & Description:  
20F640, 20 inch Color Television  
(Be sure to have this information available when  
you need service for your Product.)  
Warranty Period for this Product:  
One (1) year parts and 90 days labor.The warranty  
period continues for an additional one (1) year, for  
a total of two (2) years, with respect to the picture  
tube(s) in the Product for parts only. Labor and  
service are not provided free of charge for this  
additional period.  
Additional Item(s) Excluded from  
Warranty Coverage (if any):  
Where to Obtain Service:  
Non-rechargeable batteries.  
From a Sharp Authorized Servicer located in the  
United States. To find the location of the nearest  
Sharp Authorized Servicer, call Sharp toll free at  
1-800-BE-SHARP.  
What to Do to Obtain Service:  
Contact your Sharp Authorized Servicer to obtain  
in-home service for this Product. The Servicer will  
come to your home and if it is necessary to remove  
the Product, the Servicer will reinstall it. Be sure to  
have Proof of Purchase available.  
TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07430-2135  
Printed in Mexico  
TINS-B177WJZZ  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Network Card MZA 10 User Manual
Sharp Laptop ZR 5000 User Manual
Sherwood Stereo Receiver R 771 User Manual
Silicon Power Computer comm Computer Accessories FLSG620DA User Manual
Sony Computer Monitor SCN 61X2 User Manual
Sony Home Theater System DAV DZ555M User Manual
Sony Speaker SRS D2100 User Manual
Speed Queen Washer Dryer Home Laundry User Manual
Sterling Food Processor SSPE 5 User Manual
Sylvania DVD Player 6724DG User Manual