Sharp CRT Television 13N M100 User Manual

COLOR TELEVISION  
MODELS  
13N-M100  
13N-M150  
B
L OPERATION MANUAL L  
As an ENERGY  
S
TAR ® Partner, SHARP has determined that this product meets the  
ENERGY  
S
TAR ® guidelines for energy efficiency. ENERGY  
S
TAR ® is a U.S. registered  
trademark.  
CONTENTS  
PAGE  
PAGE  
• Sleep Timer ...................................................... 10  
• Video Adjust ..................................................... 11  
• Closed Caption ................................................. 12  
• Parent Control........................................... 13 ~ 19  
• V-CHIP .................................................. 13 ~ 19  
• Energy Save ..................................................... 20  
• Set Up....................................................... 21 ~ 24  
• EZ Setup ....................................................... 21  
• Channel Setting..................................... 22 ~ 24  
• Blue Screen ................................................... 24  
• Using the Video and Audio Input Jacks ............ 25  
• Before Calling for Service ......................... 26 ~ 27  
• Calling for Service ............................................ 28  
• Limited Warranty ............................................... 28  
• Important Information ................................... 2 ~ 3  
• Supplied Accessories ......................................... 3  
• Before Operating Your Television ........................ 3  
• Antenna Connections ................................... 3 ~ 4  
• Quick Reference Control Operation .............. 5 ~ 7  
• EZ SETUP during First Power On ...................... 8  
• Demo Mode ........................................................ 9  
• Accessing the MAIN MENU screen without  
Remote Control .................................................. 9  
• Language.......................................................... 10  
This operating manual includes basic  
operating instructions in Spanish and French.  
SPANISH is on page 6, 27.  
FRENCH is on page 7.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7209 PE
Important Information (Continued)  
WARNING - FCC Regulations state that any unauthorized changes or modifications to this equipment  
not expressly approved by the manufacturer could void the user’s authority to operate  
this equipment.  
Supplied Accessories  
Infrared Remote Control/Part Number  
RRMCG1324CESA (13N-M100)  
RRMCG1324CESB (13N-M150)  
Size AA  
Dry Batteries  
Before OperatingYour Television  
Location  
• For normal operation, yourTV should be located in an area of the room where cool adequate ventilation  
is provided. Do not place the back of the television set in a place where free airflow will be restricted.  
• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using  
magnets or any other magnetic substance, such as iron are kept well away from this TV set.  
Power  
Your TV operates on 120 Volts, 60 Hertz (normal household current) and has a polarized plug. If you  
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an  
electrician. Do not defeat the safety feature of the polarized plug.  
Note:  
• If the set will not be used for a long period, such as during a vacation, unplug the set from the wall  
outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the  
POWER BUTTON in the OFF position.)  
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near  
the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off  
either the TV or the radio.  
• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received  
due to the interference of the TV.  
L
Before using the television, prepare the Remote Control  
To use the remote control, insert batteries first.  
Insert the batteries  
Pull up  
Battery  
Cover  
• With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert two  
batteries (size “AA”). Be sure to match the battery e/d terminals with the e/d marks inside the  
compartment.  
Antenna Connections  
Antennas  
• The antenna requirements for good color television reception are more important than those for  
black & white television reception. For this reason, a good quality outdoor antenna is strongly  
recommended.  
The following is a brief explanation of the type of connections that are provided with the various  
antenna systems:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Antenna Connections (Continued)  
F-type connector  
1. A 75 ohm system is generally a round cable  
with F-type connector that can easily be  
attached to a terminal without tools (not  
supplied).  
75-ohm coaxial cable (round)  
300-ohm twin-lead cable (flat)  
2. A 300 ohm system is a flat “twin-lead” cable  
that can be attached to a 75 ohm terminal  
through a 300-75 ohm ADAPTOR (not  
supplied).  
OUTDOOR ANTENNA CONNECTION  
• Use one of the following two diagrams if you connect an outdoor antenna.  
A: Using a VHF/UHF combination outdoor antenna.  
B: Using separate VHF and/or UHF outdoor antenna.  
• Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the  
TV set.  
A. Combination VHF/UHF Antennas  
B. Separate VHF/UHF Antenna  
REAR OF TV  
VHF/UHF ANTENNA  
300/75-ohm  
ADAPTOR  
VHF  
UHF  
VHF/UHF ANTENNA  
or  
(Not supplied)  
CAUTION  
RSK OF LCTRIC HOCK  
ANTENNA ANTENNA  
300-ohm  
twin-lead  
300-ohm  
twin-lead  
COMBINER  
(not supplied)  
CAUTION  
RSOF LECTRC SHOC
PN  
75-ohm  
coaxial cable  
300-ohm  
twin-lead  
IN OUT  
75-ohm coaxial  
cable  
or  
REAR OF TV  
CABLE TV (CATV) CONNECTION  
• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm  
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.  
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay  
channels are scrambled, a cableTV converter/descrambler is generally provided to the subscriber by  
the cable TV company.This converter/descrambler is necessary for normal viewing of the scrambled  
channels. (Set your TV on channel 3 or 4.Typically one of these channels is used. If this is unknown,  
consult your cable TV company.) For more specific instructions on installing cable TV, consult your  
cable TV company. One possible method of utilizing the converter/descrambler provided by your  
cable TV company is explained below.  
Please note: RF switch equipped with position A/B (not provided) is required.  
“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s  
channel keys.  
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/  
descrambler using the converter’s channel keys.  
RF switch (not supplied)  
Two-set  
A
signal  
OUT  
IN  
B
splitter  
(not  
supplied)  
Cable TV Line  
IN  
OUT  
Cable TV converter/  
descrambler  
(not supplied)  
Note:  
• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that  
might be required.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Quick Reference Control Operation  
L Location of Controls  
(ENGLISH)  
Front Panel  
CH  
POWER  
VOL  
+
VIDEO IN AUDIO  
MENU  
VIDEO/AUDIO INTERMINALS  
SENSOR AREA FOR  
REMOTE CONTROL  
CH  
POWER  
VOL  
+
MENU  
POWER  
Press On.  
Press again Off.  
CHANNEL UP/DOWN – MENU  
VOLUME UP/DOWN  
(+) Increases sound.  
(–) Decreases sound.  
(8) Selects next higher channel.  
(9) Selects next lower channel.  
• Press both at the same time to  
access the MAIN MENU screen.  
Basic Remote Control Functions  
Infrared Transmitter Window  
POWER  
INPUT  
Press On.  
Press Switch to external video input  
Press again Off.  
mode.  
Press again Switch to TV mode.  
See page 25.  
REMOTE KEYPAD  
Accesses any channel from keypad.  
CHANNEL UP/DOWN  
FLASHBACK  
Returns to previous channel.  
(8) Selects next higher channel.  
(9) Selects next lower channel.  
• See pages 22 ~ 24 for channel  
presetting.  
VOLUME UP/DOWN  
(+) Increases sound.  
(–) Decreases sound.  
• In menu mode, changes or selects  
the TV adjustments.  
• Moves the “  
screen.  
” mark of the MENU  
MENU  
Press Accesses MAIN MENU.  
MUTE  
Press again Exits MAIN MENU.  
Press Mutes sound.  
Press again Restores sound.  
DISPLAY  
CLOSED CAPTION appears when  
sound is muted.  
Press Displays receiving channel for  
four seconds.  
Press again Removes display.  
• Temporarily displays receiving  
channel when in Closed Caption  
mode.  
TV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Referencia rápida de los controles de operación  
L Ubicación de los controles  
(ESPAÑOL)  
Panel Delantero  
CH  
POWER  
VOL  
+
VIDEO IN AUDIO  
MENU  
TERMINALES DE ENTRADA  
VIDEO/AUDIO  
ZONA DEL SENSOR DEL  
MANDO A DISTANCIA  
CH  
POWER  
VOL  
+
MENU  
ALIMENTACION (POWER)  
Pulsando Enciende (On).  
CANAL SUPERIOR/INFERIOR (CH) –  
MENU  
(8) Selecciona el siguiente canal  
superior.  
(9) Selecciona el siguiente canal  
inferior.  
Pulsando nuevamente Apaga (Off).  
AUMENTO/DISMINUCION  
DEL VOLUMEN (VOL)  
(+) Aumenta el sonido.  
(–) Disminuye el sonido.  
• Pulse ambos al mismo tiempo para  
acceder a la pantalla de MENU  
PRINCIPAL.  
Funciones Basicas Del Control Remoto  
Ventanilla del transmisor de infrarrojos  
ALIMENTACION (POWER)  
Pulsando Enciende (On).  
Pulsando nuevamente Apaga  
(Off).  
ENTRADA (INPUT)  
Pulsando Cambìa al modo de  
entrada de video externo.  
Pulsando nuevamente Cambìa al  
modo de TV.  
TECLADO A DISTANCIA  
Para tener acceso a cualquier canal  
empleando las teclas.  
CANAL SUPERIOR/INFERIOR  
(CHANNEL UP/DOWN)  
(8) Selecciona el siguiente canal  
superior.  
(9) Selecciona el siguiente canal  
inferior.  
RETORNO AL CANAL  
ANTERIOR (FLASHBACK)  
Para volver al canal anterior.  
• En el modo de MENU, mueve la  
AUMENTO/DISMINUCION  
DEL VOLUMEN  
marca “  
”.  
(VOLUME UP/DOWN)  
(+) Aumenta el sonido.  
(–) Disminuye el sonido.  
• En modo de MENU cambia o  
selecciona el ajuste del televisor.  
MENU (MENU)  
Pulsando Accede al MENU PRIN-  
CIPAL.  
Pulsando nuevamente Sale del  
MENU PRINCIPAL.  
SILENCIAMIENTO (MUTE)  
Pulsando Silencia el sonido.  
Pulsando nuevamente Restaura el  
sonido.  
• CLOSED CAPTION aparece  
automáticamente cuando el sonido  
es silenciado. Siempre y cuando la  
transmisión tenga esta señal.  
TV  
VISUALIZACION (DISPLAY)  
Pulsando Aparece el canal de re-  
cepción por cuatro segundos.  
Pulsando nuevamente Elimina la  
visualización.  
• En el modo de “Closed Caption” se  
muestra el canal de recepción por  
un corto tiempo.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Référence rapide sur les commandes  
L Emplacement des touches  
(FRANÇAIS)  
Panneau Avant  
CH  
POWER  
VOL  
+
VIDEO IN AUDIO  
MENU  
PRISES D’ENTRÉE VIDÉO/AUDIO  
ZONE DE DETECTION DU  
CAPTEUR  
CH  
POWER  
VOL  
+
MENU  
ALIMENTATION (POWER)  
Appuyer pour mettre sous tension.  
Appuyer de nouveau pour mettre  
hors tension.  
TOUCHES DES CANAUX  
CROISSANT/DÉCROISSANT (CH) –  
MENU  
(8) Sélectionne le canal supérieur  
suivant.  
AUGMENTATION/RÉDUCTION  
DU VOLUME SONORE (VOL)  
(+) Pour augmenter le volume du son.  
(–) Pour diminuer le volume du son.  
(9) Sélectionne le canal inférieur  
précédent.  
• Appuyez simultanément sur ces deux  
touches pour accéder à l’écran  
MENU PRINCIPAL.  
Fonctions de base de la télécommande  
Fenêtre d’émission du signal infrarouge  
ALIMENTATION (POWER)  
Appuyer pour mettre sous tension.  
Appuyer de nouveau pour mettre hors  
tension.  
ENTRÉE (INPUT)  
Appuyer pour sélectionner le mode  
vidèo externe.  
Appuyer de nouveau pour sélectionner  
la télévision.  
PAVE NUMERIQUE DE  
COMMANDE A DISTANCE  
Sélectionne directement le canal  
voulu sur le pavé numérique.  
TOUCHES DES CANAUX CROIS-  
SANT/DÉCROISSANT  
(CHANNEL UP/DOWN)  
(8) Sélectionne le canal supérieur  
suivant.  
(9) Sélectionne le canal inférieur  
précédent.  
RETOUR (FLASHBACK)  
Rappelle le canal regardé précédent.  
AUGMENTATION/RÉDUCTION DU  
VOLUME SONORE  
(VOLUME UP/DOWN)  
(+) Pour augmenter le volume du son.  
(–) Pour diminuer le volume du son.  
• Pour changer ou sélectionner les  
réglages du téléviseur en mode  
menu.  
• Déplace le curseur “  
du MENU.  
” sur l’écran  
RÉGLAGE (MENU)  
Appuyer  
PRINCIPAL.  
Accès au MENU  
Appuyer de nouveau Sortie du  
MENU PRINCIPAL.  
AFFICHAGE (DISPLAY)  
SOURDINE (MUTE)  
Appuyer pour afficher le canal reçu  
pendant quatre secondes.  
Appuyer Mise en sourdine du son.  
Appuyer de nouveau Rétablisse-  
ment du son.  
• CLOSED CAPTION apparaît lorsque  
le son est mis en sourdine.  
Appuyer de nouveau pour faire  
disparaître le canal.  
• Pour afficher temporairement le  
canal reçu en le mode Sous-titres.  
TV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
EZ SETUP during First Power On  
L
When you turn on the TV for the first time, it will automatically  
memorize the broadcasting channels.  
POWER  
Please perform the following instructions before you press the  
power button.  
(1) Insert the batteries into the remote control. (See page 3)  
(2) Connect the antenna cable to the TV set. (See page 3 ~ 4)  
(3) Plug in the AC POWER cord to the wall outlet.  
VOLUME  
(+)/(–)  
CHANNEL  
UP (8)/  
DOWN (9)  
MENU  
1 Press the POWER button on the TV set or on the Remote Control  
to turn on the TV. The SELECT LANGUAGE mode will be  
displayed.  
SE L ECT L ANGUAGE  
ENGL I SH  
ESPAÑOL  
FRANCA I S  
SE L ECT : CH8 / 9  
(Remote Control)  
(On the Set)  
SE T  
: VOL + / –  
POWER  
(SELECT LANGUAGE mode)  
2 Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH  
SE L ECT L ANGUAGE  
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.  
ENGL I SH  
ESPAÑOL  
FRANCA I S  
SE L ECT : CH8 / 9  
SE T  
: VOL + / –  
3 Press VOL (+) or (–) to access EZ SETUP mode.  
CONNECT ANT ENNA  
OR CAB L E .  
ST ART E Z SE TUP ?  
YES : VOL +  
NO : VOL –  
(EZ SETUP mode)  
4 Press VOL (+).  
The tuner will automatically search for the  
broadcasting and cable TV channels.(The CH No.  
will automatically increase when it appears.)  
P L EASE WA I T  
AUTO PROGRAMM I NG  
If you want to stop the EZ SETUP process once it  
has started, press VOL (–) and it will be canceled.  
1 8  
S TOP : VOL –  
If you want to SETUP again, please refer to page  
21 on SETUP.  
5 Once EZ SETUP is completed, the lowest channel number  
memorized will be displayed.  
2
Note:  
• If EZ SETUP does not memorize all the channels in your region, please refer to page 22 for more  
information on manually memorizing the channels using CHANNEL SETTING.  
• It may be difficult to PRESET when the broadcasting signals are weak, the channel cycle frequency  
is incorrect or the frequency jamming is occuring around the area. Please refer to pages 22 ~ 24 for  
more information on manually memorizing the channels using CHANNEL SETTING.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Demo Mode  
To quickly learn more about the TV set, press and hold for more than  
three seconds both CH UP (8) and DOWN (9) on the TV set.The TV  
set will go into DEMO mode and briefly explain the various features.  
To cancel DEMO mode, again press both CH UP (8) and DOWN (9)  
on the TV set.  
(On the Set)  
CH  
MENU  
CHANNEL  
UP (8)/DOWN (9)  
buttons  
Example:  
DEMO mode display  
F
r
o
m
SHARP  
M
i
nds  
duc  
e
SHARP  
P
r
o
t
s
Com  
Accessing the MAIN MENU screen without Remote Control  
• If you misplaced your Remote Control you can still access most settings  
via the MAIN MENU screen when you press both CH UP (8) and  
DOWN (9) on the TV set.  
(On the Set)  
CH  
• Some features of yourTV set will not be accessible without the Remote  
Control. If you lost your Remote Control, contact a Sharp Service  
Center for a replacement.  
MENU  
CHANNEL  
UP (8)/DOWN (9)  
buttons  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Language  
L
L
The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.  
Setting the ON SCREEN DISPLAY Language.  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
V I DEO AD J US T  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
(MAIN MENU screen)  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET UP”.  
S L EEP T I MER  
V I DEO AD J US T  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
3 Press VOL (+) or (–) to access SET UP mode, then press CH UP (8)  
B L UE SCREEN  
L ANGUAGE  
CH SE T T I NG  
or DOWN (9) to move the “ ” mark to “LANGUAGE”.  
(SET UP mode)  
4 Press VOL (+) or (–) to access LANGUAGE change mode.  
L ANGUAGE  
ENGL I SH  
ESPAÑOL  
FRANCA I S  
(LANGUAGE change mode)  
5 Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH  
I D I OMA  
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.  
ENGL I SH  
ESPAÑOL  
FRANCA I S  
6 Press MENU to exit.  
Sleep Timer  
L
You can set the number of minutes for your TV to automatically turn off.  
S L EEP T I MER  
V I DEO AD J US T  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
1 Press MENU to access MAIN MENU screen.  
2 Press VOL (+) or (–) to access TIMER SET mode.  
(MAIN MENU screen)  
S L EEP T I MER  
1 2 0 REMA I N  
3 Press VOL (+) or (–) to set a sleep time of 30, 60, 90 or 120 minutes.  
4 Press MENU to exit.  
Note:  
(TIMER SET mode)  
To turn off the Sleep Timer, repeat the above SLEEP TIMER steps and select “– – – REMAIN” during  
step 3.  
• While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular  
Download from Www.Somanuals.com. All Manuals Search And Download.  
intervals or when the remote’s Display key is pressed.  
10  
Video Adjust  
Description of Adjustment Items  
VOLUME  
(+)/(–)  
Selected  
item  
VOL UP (+) button  
VOL DOWN (–) button  
CHANNEL  
UP (8)/  
DOWN (9)  
PICTURE  
TINT  
To increase contrast  
To decrease contrast  
To make skin tones greenish  
To increase color intensity  
To increase brightness  
To increase sharpness  
To make skin tones purplish  
To decrease color intensity  
To decrease brightness  
To decrease sharpness  
MENU  
COLOR  
BRIGHT  
SHARP  
FAVORITE  
COLOR  
To choose a RED, BLUE or STANDARD COLOR TONE.  
RESET  
To return all adjustments to factory preset levels.  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
V I DEO AD J US T  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “VIDEO  
ADJUST”.  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access PICTURE adjust mode.  
P I CTURE  
2 7  
+
(PICTURE adjust mode)  
4 Press CH UP (8) or DOWN (9) to select the desired mode.  
(Refer to the diagram below.)  
TINT  
BRIGHT  
SHARP  
PICTURE  
COLOR  
FAVORITE COLOR  
RESET  
: CH UP (8)  
: CH DOWN (9)  
5 Press VOL (+) or (–) to adjust the setting.  
P I CTURE  
2 7  
+
VOL UP (+)  
increase contrast  
VOL DOWN (–)  
decrease contrast  
6 Repeat steps 4 to 5 to adjust other settings.  
7 Press MENU to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Closed Caption  
L
HOWTO SET CLOSED CAPTION  
YourTV is equipped with an internal Closed Caption decoder.Closed  
Caption” is a system which allows you to view conversations, narration,  
and sound effects in TV programs and home videos as subscript on  
your TV screen as shown on the right.  
• Not all the programs and videos will offer closed caption. Please look  
for the “  
” symbol to ensure that captions will be shown.  
VOLUME  
(+)/(–)  
• Closed Caption broadcast can be viewed in two modes: CAPTION  
andTEXT.For each mode, two channels are available, CH1 and CH2:  
CHANNEL  
UP (8)/  
DOWN (9)  
The [CAPTION] mode subscripts dialogues and commentaries of TV  
dramas and news programs while allowing clear view of the picture.  
The [TEXT] mode displays over the picture other various information  
(such as TV program schedule, weather forecast, etc.) that is  
independent of the TV programs.  
MENU  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
V I DEO AD J US T  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
2 Press CH UP (8) or DOWN (9) to move the mark to “CLOSED  
CAPTION”.  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access CLOSED CAPTION setting mode.  
C LOSED CAP T I ON  
MODE  
DA T A  
: CAPT I ON  
: CH  
1
(CLOSED CAPTION setting mode)  
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to either  
C LOSED CAP T I ON  
“MODE” or “DATA”.  
MODE  
DA T A  
: CAPT I ON  
: CH  
1
5 Press VOL (+) or (–) to change the CLOSED CAPTION setting.  
C LOSED CAP T I ON  
CH 1  
DATA :  
CAPTION  
MODE :  
MODE  
DA T A  
: CAPT I ON  
: CH  
1
CH 2  
TEXT  
OFF  
6 Press MENU to exit.  
Note:  
• If a broadcast has CLOSED CAPTION and the MUTE button is pressed, the set enters [CAPTION]  
mode automatically. Pressing MUTE again will return the set to its previous condition.  
• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor  
or if there are problems at the broadcast source. This does not necessarily indicate a problem with  
your set.  
• If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION  
broadcast, the closed captions will disappear momentarily.  
• When viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen  
may become dark and blank. Should this occur, set the Closed Caption mode to “OFF”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Parent Control (V-CHIP Operation)  
L V-CHIP  
• This function allows you to restrict TV programs and also allows you to control TV usage based on  
FCC data. This function is to prevent your children from watching violence or sexual scenes that may  
be harmful.  
• Restriction ofTV programs includes two characters that contain information about the program’s MPAA  
rating and theTV Parental Guidelines. MPAA is restricted by age.TV Parental Guidelines are restricted  
by age and contents.  
• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for  
complete control.  
[1] MPAA RATING  
RATING  
G
GENERAL AUDIENCES. All ages admitted.  
PG  
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for  
children.  
PG-13  
PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate  
for children under 13.  
age  
base  
R
RESTRICTED. Under 17 requires accompanying parent or adult guardian.  
NO ONE 17 AND UNDER ADMITTED.  
NC-17  
X
X Rating is an older rating that is unified with NC-17 but may be encoded on  
older movie’s data.Note:  
MPAA RATING (Example)  
Example 1.  
Example 2.  
“R” in the age based RATING is blocked, this will  
automatically block the high rating “NC-17”, “X” also.  
“PG-13” in the age based RATING is blocked,  
this will automatically block the high ratings “R”,  
“NC-17”, “X” also.  
1. User setting  
2. Block table  
not to  
1. User setting  
2. Block table  
G
– – – – –  
G
block  
not to  
not to  
block  
G
– – – – –  
G
PG  
– – – – –  
PG  
block  
not to  
block  
not to  
block  
Select  
block  
auto-  
block  
auto-  
block  
PG  
– – – – –  
PG  
PG-13 – – – – –  
BLOCK  
NC-17 BLOCK  
PG-13  
R
age  
base  
Select  
block  
auto-  
block  
auto-  
block  
auto-  
block  
PG-13 BLOCK  
BLOCK  
NC-17 BLOCK  
PG-13  
R
R
age  
base  
R
NC-17  
X
NC-17  
X
X
BLOCK  
X
BLOCK  
Note:  
• MPAA RATING is only age based ratings.  
[2] TV PARENTAL GUIDELINES  
content base  
S
y
x
AGE  
D
L
V
FV  
RATING  
(Sexually  
(Adult  
(Sexual (Violence) (Fantasy  
Suggestive Language) Situation)  
Dialog)  
Violence)  
V
V
V
V
TV-Y (All children)  
TV-Y7 (Direct to Older Children)  
TV-G (General Audience)  
E
age  
TV-PG (Parental Guidance  
Suggested)  
V
V
V
V
V
base  
TV-14 (Parents Strongly  
Cautioned)  
V
V
V
V
V
V
V
V
V
D
TV-MA (Mature Audience Only)  
V : Content Rating can be set.  
: Content Rating can not be set (not normally broadcast by TV station).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Parent Control (V-CHIP Operation Continued)  
TV PARENTAL GUIDELINES (Example)  
Example 1.1 : Age Based setting  
Go through all select ratings and select unblocked for “AGE”.  
This will automatically unblock everything.  
AG  
E
D
L
S
V
FV  
TV–Y  
: V I EW  
TV–Y7  
V: BLOCK  
TV–G  
TV–PG  
TV–14  
TV–MA  
MENU : RETURN  
Example 1.2 : Age Based setting  
For “TV-G” select “BLOCK” for “AGE”. This will automatically block the  
higher age ratings “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.  
Furthermore, the content ratings “D”, “L”, “S”, “V”, “FV” are automatically  
A
G
E
D
L
S
V
FV  
TV–Y  
: V I EW  
TV–Y7  
V: BLOCK  
TV–G  
TV–PG  
TV–14  
TV–MA  
V
V
V
V
V V V V  
V V V V  
V V V  
blocked as well for “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.  
MENU : RETURN  
Example 2.1 : Content Based setting  
For “TV-PG”, “TV-14” and “TV-MA” select unblocked for each content  
ratings (“D”, “L, “S”, “V”, “FV”) by leaving “AGE” unblocked for “TV-  
PG”, “TV-14” and “TV-MA”. If you choose to unblock for each one in  
A
G
E
D
L
S
V
FV  
TV–Y  
: V I EW  
TV–Y7  
V: BLOCK  
TV–G  
TV–PG  
TV–14  
TV–MA  
content base.  
MENU : RETURN  
Example 2.2 : Content Based setting  
Then for “TV-PG” and select “BLOCK” for only “V” (Violence). This will  
automatically block the higher ratings “TV-14-V” and “TV-MA-V” (“TV-  
14” and “TV-MA” for Violence content only).  
Please note that with these settings blocking does NOT occur. If a  
program is rated only “TV-MA”;it must be rated “TV-MA-V” to be blocked.  
A
G
E
D
L
S
V
FV  
TV–Y  
V
V
V
: V I EW  
TV–Y7  
V: BLOCK  
TV–G  
TV–PG  
TV–14  
TV–MA  
MENU : RETURN  
Example 3 : Reset an Age Based setting  
For “TV-14” and select again “BLOCK” for “AGE”.  
This will again automatically block the content ratings “D”, “L”, “S”, “V”,  
“FV” for “TV-MA” as well as “TV-14”.  
Please note that the lower age rating “TV-PG” did not change from its  
previous settings.  
A
G
E
D
L
S
V
FV  
TV–Y  
: V I EW  
TV–Y7  
V: BLOCK  
TV–G  
TV–PG  
TV–14  
TV–MA  
V
V
V V V V  
V V V  
MENU : RETURN  
Note:  
• Content ratings can be modified but only in the combinations indicated by an V in the table left.  
• Changing a lower age rating’s content setting to “BLOCK” automatically changes the same higher age  
rating’s content setting to “BLOCK” regardless of their previous settings.  
• Changing a lower rating’s “AGEsetting to “BLOCK” automatically changes all higher ratings toBLOCK”  
regardless of their previous settings.  
• Any rating’s “AGE” set to unblocked must have its content settings individually set.  
[3] ADDITIONAL MODE  
Besides the above “MPAA RATINGS” and “TV PARENTAL GUIDELINES” new ratings system’s data  
can be downloaded when they become available. (See page 18.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Parent Control (V-CHIP Operation Continued)  
LHOW TO SET V-CHIP  
REMOTE  
KEYPAD  
VOLUME  
(+)/(–)  
CHANNEL  
UP (8)/  
DOWN (9)  
MENU  
[1] MPAA RATING  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
V I DEO AD J US T  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
(MAIN MENU screen)  
2 Press CH UP (8) or DOWN (9) to move the “ mark toPARENT  
S L EEP T I MER  
V I DEO AD J US T  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
CONTROL.  
3 Press VOL (+) or (–) to access PARENT CONTROL mode, then  
PARENT CONTROL  
PARENT CONTROL V-CHIP BLOCK” is displayed.  
V – C  
H
I P B LOCK  
(PARENT CONTROL mode)  
4 Press VOL (+) or (–) to access V-CHIP select mode, then press  
MPAA  
T V GU I DE L I NES  
VOL (+) or (–) to select “MPAA RATING”.  
DO  
S T A TUS  
W
N LOAD : OF F  
: OF F  
(V-CHIP select mode)  
G
: ––––  
: BLOCK  
: BLOCK  
: BLOCK  
: BLOCK  
: BLOCK  
5 Press CH UP (8) or DOWN (9) to move the “ ” mark to "PG",  
then press VOL (+) or (–) to select BLOCK. If you set “PG” to  
BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically blocked.  
PG  
PG1 3  
R
NC1 7  
X
MENU : RETURN  
6 Repeat pressing MENU to return V-CHIP select mode exit.  
Note:  
Ex.  
• If you set “G” to BLOCK , all RATING are automatically blocked.  
• If you set “X” to BLOCK, “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Parent Control (V-CHIP Operation Continued)  
[2] TV PARENTAL GUIDELINES  
1 Repeat steps 1 to 3 of [1] MPAA RATING.  
MPAA  
T V GU I DE L I NES  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “TV  
GUIDELINES”.  
DO  
S T A TUS  
W
N LOAD : OF F  
: OF F  
3 Press VOL (+) or (–) to access TV GUIDELINES mode.  
A
G
E
D
L
S
V
FV  
TV–Y  
TV–Y7  
TV–G  
TV–PG  
TV–14  
TV–MA  
V
: V I E  
W
V: BLOCK  
V
V
V
V
V
V V V V  
V
V V V  
V V V  
MENU : RETURN  
4 To change CONTENT SETTING, press CH UP (8) or DOWN (9)  
to move the “ ” to the desired rating and then press VOL (+) or  
(–) to select.  
(TV GUIDELINES mode)  
5 Press CH UP (8) or DOWN (9) to move the “ ” to the desired  
content and then press VOL (+) or (–) to select either “BLOCK” or  
unblock (“– – – –”).  
TV–Y7  
AGE  
D
:
:
:
:
:
:
BLOCK  
–––––  
–––––  
–––––  
–––––  
BLOCK  
L
S
V
FV  
MENU : RETURN  
(CONTENT RATING mode)  
6 Press MENU to return to TV GUIDES mode.  
A
G
E
D
L
S
V
FV  
TV–Y  
TV–Y7  
TV–G  
TV–PG  
TV–14  
TV–MA  
: V I EW  
V: BLOCK  
V
V
V
V
V V V V  
V
7 Repeat steps 4 to 5 until all ratings and their contents are set.  
V V V  
V V V  
MENU : RETURN  
8 When done, press MENU to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
Parent Control (V-CHIP Operation Continued)  
• ACTIVATE ON TO TURN ON V-CHIP BLOCK  
1 Press CH UP (8) or DOWN (9) to move the “ ” mark to  
MPAA  
T V GU I DE L I NES  
“STATUS”, then press VOL (+) or (–) to activate ON the V-CHIP  
BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.)  
DO  
S T A TUS  
W
N LOAD : OF F  
: ON  
2 Press MENU, then “INPUT SECRET No.will be displayed.  
I NPUT SECRE T N o .  
3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD.  
I NPUT SECRE T N o .  
1
2
3
4
4 Press MENU and SECRET No. is registered.  
• To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.  
1 “V-CHIP HAS BEEN ACTIVATED” will be displayed if you watch  
2 3  
the program with Program Rating data as same as you configured.  
V CH I P HAS BEEN  
ACT I VA T ED  
T V – Y 7  
F V  
Note:  
• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.  
2 Press MENU, then “INPUT SECRET No.will be displayed.  
I NPUT SECRE T N o .  
3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD, then  
V-CHIP BLOCK temporarily will be canceled.If the wrong SECRET  
No. is chosen, “SECRET No. IS INCORRECT” will be displayed.  
Input the SECRET No. again in this case.  
I NPUT SECRE T N o .  
Note:  
If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
Parent Control (V-CHIP Operation Continued)  
• To change the V-CHIP BLOCK setting. (Secret No. is registered.)  
1 Repeat steps 1 to 3 of [1] MPAA RATING, then “INPUT SECRET  
No.” will be displayed.  
I NPUT SECRE T N o .  
2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD  
and the V-CHIP select mode will be displayed. Repeat  
configuration of the V-CHIP BLOCK.  
I NPUT SECRE T N o .  
• If you intend to change or forget your Secret No., clear the original Secret No. and set  
up a new one.  
1 Repeat steps 1 to 3 of [1] MPAA RATING, or 1 to 2 of [To cancel  
the V-CHIP BLOCK screen while V-CHIP BLOCK has been  
activated], then “INPUT SECRET No.will be displayed.  
(On the Set)  
2 Press and hold both VOL (+) and CH DOWN (9) on theTV set  
simultaneously until the message “INPUT SECRET No.”  
disappears.  
CH  
VOL  
+
MENU  
VOL (+)/CHANNEL  
DOWN (9) buttons  
3 Press MENU two times to exit.  
[3] ADDITIONAL MODE (DOWNLOAD)  
There will be an additional new rating system. In that case, please set up as follows.  
Subsequently the new rating system will set up automatically.  
1 Repeat steps 1 to 3 of [1] MPAA RATING.  
MPAA  
T V GU I DE L I NES  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to  
“DOWNLOAD”.  
DOWN LOAD : OF F  
S T A TUS  
MPAA  
: OF F  
3 Press VOL (+) or (–) to “DOWNLOAD : ON”.  
T V GU I DE L I NES  
DO  
S T A TUS  
W
N LOAD : ON  
: OF F  
4 Repeat pressing MENU to return exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
Parent Control (V-CHIP Operation Continued)  
• DOWNLOAD V-CHIP DATA  
REMOTE  
KEYPAD  
VOLUME  
(+)/(–)  
CHANNEL  
UP (8)/  
DOWN (9)  
MENU  
1 If you watch the program with “New Rating System Data”,  
P L EASE WA I T  
DOWNLOAD screen will be displayed.  
NO  
W
DO  
WN LOAD I NG  
V – CH I P DA T A  
(DOWNLOAD screen)  
2 DOWNLOAD screen will disappear, if DOWNLOAD is finished.  
Note:  
DOWNLOAD would not be started, if you don’t watch the program with “New Rating System  
Data”.  
• ADDITIONAL MODE (Example)  
1 Repeat steps 1 to 2 of [3] ADDITIONAL MODE.  
MPAA  
TV GU I DEL I NES  
Cdn . Eng l i sh Ra t i ngs  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “Cdn.  
Cdn . F r enc h Ra t i ngs  
English Ratings”, then press VOL (+) or (–).  
DO  
W
NLOAD : ON  
STATUS  
: ON  
(After download the rating data)  
3 You can select “BLOCKor “– – – – –” (unblock) from each RATING  
C
C8+  
G
PG  
14+  
18+  
: ––––  
: BLOCK  
: ––––  
: BLOCK  
: ––––  
: BLOCK  
mode by pressing CH UP (8) or DOWN (9) and VOL (+) or (–).  
I ND I V I DUAL BLOCK  
MENU : RETURN  
(ENGLISH INDIVIDUAL BLOCK mode)  
4 You can select “BLOCKor “– – – – –” (unblock) from each RATING  
mode by pressing CH UP (8) or DOWN (9) and VOL (+) or (–) if  
you select “Cdn. French Ratings” in step 2.  
G
: ––––  
: BLOCK  
: ––––  
: BLOCK  
: ––––  
8+  
13+  
16+  
18+  
I ND I V I DUAL BLOCK  
MENU : RETURN  
(FRENCH INDIVIDUAL BLOCK mode)  
Note:  
In additional mode  
Including two types (English mode, French mode), altogether you are able to download 4 kinds  
of mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
Energy Save  
VOLUME  
(+)/(–)  
L
This feature lets you lower the power consumption of your TV  
set which in turn saves you money and minimizes the impact on  
the environment. When this feature is turned on, it reduces the  
brightness of the TV to a level that consumes approximately 20  
percent less energy than when the feature is turned off.  
The reduction in brightness will be less noticeable under low  
room lighting conditions.  
CHANNEL  
UP (8)/  
DOWN (9)  
MENU  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
2 Press CH UP (8) or DOWN (9) to move the mark toENERGY  
V I DEO AD J US T  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
SAVE”.  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access ENERGY SAVE select mode.  
ENERGY SAVE  
: OF F  
(ENERGY SAVE select mode)  
4 Press VOL (+) or (–) to select “ON”.  
ENERGY SAVE  
: ON  
5 Press MENU to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
Set Up  
L
EZ SETUP  
By operating the channel presetting functions, you can preset  
your TV to the desired channels for viewing.  
REMOTE  
KEYPAD  
VOLUME  
(+)/(–)  
CHANNEL  
UP (8)/  
DOWN (9)  
MENU  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
V I DEO AD J US T  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET  
UP”.  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access SET UP mode, then press CH UP  
B L UE SCREEN  
L ANGUAGE  
(8) or DOWN (9) to move the “ ” mark to “CH SETTING”.  
CH SE T T I NG  
(SET UP mode)  
4 Press VOL (+) or (–) to access CH SETTING mode.  
E Z SE TUP  
A I R / CAB L E  
CH SEARCH  
CH MEMORY  
(CH SETTING mode)  
5 Press VOL (+) or (–) to access EZ SETUP mode.  
CONNECT ANT ENNA  
OR CAB L E .  
ST ART E Z SE TUP ?  
YES : VOL +  
NO : VOL –  
(EZ SETUP mode)  
6 Press VOL (+).  
P L EASE WA I T  
The tuner will automatically search for the  
broadcasting and cableTV channels.(The CH No.  
will automatically increase when it appears.)  
AUTO PROGRAMM I NG  
If you want to stop the EZ SETUP process once it  
has started, press VOL (–). Search will be  
canceled.  
1 8  
S TOP : VOL –  
7 Once EZ SETUP is completed, the lowest channel number  
memorized will be displayed.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
Set Up (Continued)  
L
CHANNEL SETTING  
If EZ SETUP does not memorize all the channels in your region, follow the instructions below  
to manually memorize the channel.  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
V I DEO AD J US T  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET  
UP”.  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access SET UP mode.  
B L UE SCREEN  
L ANGUAGE  
CH SE T T I NG  
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to “CH  
SETTING”.  
(SET UP mode)  
5 Press VOL (+) or (–) to access CH SETTING mode.  
E Z SE TUP  
A I R / CAB L E  
CH SEARCH  
CH MEMORY  
(CH SETTING mode)  
6 Press CH UP (8) or DOWN (9) to move the “ ” mark to “AIR/  
E Z SE TUP  
A I R / CAB L E  
CH SEARCH  
CH MEMORY  
CABLE”, then press VOL (+) or (–) to access AIR/CABLE mode.  
7 Press CH UP (8) or DOWN (9) to move the “ ” mark to the  
A I R / CAB L E  
desired mode.  
A I R  
CAB L E S TD  
CAB L E HRC  
CAB L E I RC  
CABLE STD  
CABLE HRC  
CABLE IRC  
AIR  
(AIR/CABLE mode)  
8 Press MENU to exit.  
Note:  
• Receivable channels of your TV set are:  
AIR channels:  
CABLE channels:  
1 (HRC and IRC mode only)  
2 through 125 (STD, HRC and IRC)  
VHF: 2 through 13.  
UHF: 14 through 69.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
Set Up (Continued)  
L
Saving broadcastTV channels into memory.  
1.1 Press MENU to access MAIN MENU  
screen, then press CH UP (8) or DOWN  
(9) to move the “ ” mark to “SET UP”.  
E Z SE TUP  
A I R / CAB L E  
CH SEARCH  
CH MEMORY  
1.2 Press VOL (+) or (–) to access SET UP  
mode, then press CH UP (8) or DOWN  
(9) to move the “ ” mark to “CH  
SETTING”.  
(CH SETTING mode)  
1.3 Press VOL (+) or (–) to access CH  
SETTING screen.  
1.4 Press CH UP (8) or DOWN (9) to move  
the “ mark to “CH SEARCH”, then press  
VOL (+) or (–) to access CH SEARCH  
screen.  
START  
(START)  
CH SEARCH  
2.1 Press VOL (+). The tuner will search  
through all available channels in your area  
and add them into the TV’s memory.  
A I R  
1 2  
S T ART : +  
S TOP : –  
(STOP)  
STOP  
2.2 Press VOL (–). CH SEARCH will stop at  
the current channel and will not add any  
higher channels.  
(CH SEARCH mode)  
2.3 Press MENU to exit.  
L
Adding weak or additional channels or erasing unwanted channels from TV memory.  
1.1 Press MENU to access MAIN MENU  
screen, then press CH UP (8) or DOWN  
(9) to move the “ ” mark to “SET UP”.  
E Z SE TUP  
A I R / CAB L E  
CH SEARCH  
CH MEMORY  
1.2 Press VOL (+) or (–) to access SET UP  
mode, then press CH UP (8) or DOWN  
(9) to move the “ ” mark to “CH  
SETTING”.  
(CH SETTING mode)  
1.3 Press VOL (+) or (–) to access CH  
SETTING mode, then press CH UP (8) or  
DOWN (9) to move the “ ” mark to “CH  
MEMORY”.  
2.1 Press VOL (+) or (–) to access CH  
MEMORY.  
2.2 Use CH UP (8) or DOWN (9) or REMOTE  
KEYPAD to select each desired channel  
to add or erase.  
or  
2.3 Press VOL (+) to add a channel to theTV’s  
memory or press VOL (–) to erase a  
channel from the TV’s memory.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
Set Up (Continued)  
VOLUME  
(+)/(–)  
2.4 Press MENU to exit.  
VOL (+)  
CHANNEL  
UP (8)/  
DOWN (9)  
To add channel 12 to  
CH MEMORY  
A I R 1 2  
CH MEMORY  
the TV memory  
A I R  
1 2  
MENU  
TO ADD  
: +  
VOL (–)  
TO ERASE : –  
To erase channel 12 from  
the TV memory  
(CH MEMORY  
unmemorized channel)  
(CH MEMORY  
memorized channel)  
Note:  
• If you press VOL (+) again while in the CH SEARCH mode, auto-program will start again, and the  
previously memorized channels will be lost.  
L
BLUE SCREEN  
Automatically turns the screen blue if a broadcast signal is not  
received.  
1 Press MENU to access MAIN MENU screen.  
S L EEP T I MER  
V I DEO AD J US T  
C LOSED CAP T I ON  
PARENT CONTROL  
ENERGY SAVE  
SE T UP  
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET  
UP”.  
(MAIN MENU screen)  
3 Press VOL (+) or (–) to access SET UP mode.  
B L UE SCREEN  
L ANGUAGE  
CH SE T T I NG  
(SET UP mode)  
4 Press VOL (+) or (–) to access BLUE SCREEN select mode.  
B LUE SCREEN  
: OF F  
(BLUE SCREEN select mode)  
5 Press VOL (+) or (–) to select “ON”.  
B LUE SCREEN  
: ON  
6 Press MENU to exit.  
Note:  
• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function  
despite the presence of a broadcast signal.To continue watching TV under these conditions, switch  
the BLUE SCREEN “OFF”.  
• While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if the  
BLUE SCREEN is turned on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
Using the Video and Audio Input Jacks  
L
Connecting video equipment for playback of video material.  
• When the television is connected to video equipment as shown below, the material being played  
back on the video equipment can be seen on the television screen.  
Connecting video device equipped with video output terminal.  
CONNECTIONS  
(Front connection  
terminals of TV)  
VIDEO EQUIPMENT  
VIDEO IN AUDIO  
CAMCORDER  
To VIDEO OUTPUT  
To AUDIO OUTPUT  
TV GAME  
VCR  
L
To watch video material playback.  
• Press the Remote’s INPUT to select VIDEO INPUT mode to which the video equipment you want to  
playback is connected.  
• The external VIDEO INPUT mode will change as follows each time the INPUT is pressed.  
AIR  
or  
CABLE  
INPUT  
(Front)  
• INPUT mode can be selected by pressing either the CH UP (8) on the TV remote control when the  
TV is set to the highest channel stored in memory, or by pressing the CH DOWN (9) when it is set to  
the lowest channel.  
Note:  
• When connecting video or audio equipment to the television, be sure that the power is turned off in  
order to prevent damage to either the television or the equipment being connected.  
• It is the intent of SHARP that this product be used in full compliance with the copyright law of the  
United States and that prior permission be obtained from copyright owners whenever necessary.  
• For detailed information on the connection and use of auxiliary equipment, refer to the instruction  
manuals of the equipment being used.  
• The connection cords can be obtained from your local video store.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
Before Calling for Service  
Check these items and see if you can correct trouble with a slight adjustment of the controls.  
QUICK SERVICE  
CHECK LIST  
POSSIBLE REMEDY  
Try a new channel, if OK, then possible station  
trouble.  
X X X X X X X X X X X X X X X X X  
Is TV plugged in? Power at outlet?  
Is TV’s POWER button on?  
X X X X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X X X X  
Isantennaconnectedtoterminalonthebackof  
the set?  
X X X X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X X X X  
If outside antenna is being used, check for  
broken wire.  
Checkforlocalinterferenceorexternalelectrical  
noise.  
X X X X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X X X X  
Turn off with POWER button and then turn it on  
after about a minute.  
Adjust COLOR control.  
Adjust PICTURE control.  
X X X X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X X X X  
Check external Video/Audio products: look for  
loose/broken connection leads. (Refer to page  
25)  
X X X X X X X X X X X X X X X X X  
Check batteries of Remote Control.  
X X X X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X X X X  
ChangeClosedCaptionmodetoOFF/Energy  
Save mode to “OFF”.  
Unplug the TV and plug it in again after two  
minutes.  
X X X X X X X X X X X X X X X X X  
Note:  
• When viewing in TEXT mode, if no TEXT broadcast is being received, the  
screen may become dark and blank. Should this occur, set the Closed  
Caption mode to “OFF”.  
(Dark and Blank Picture)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
Antes de llamar al servicio de reparaciones  
Verifique estos items para ver si usted mismo puede solucionar el problema.  
LISTA DE COMPROBACIONES  
DE SERVICIORAPIDO  
POSIBLE SOLUCIÓN  
Pruebe con otro canal y si todo está  
bien, el problema puede ser de la  
emisora.  
Está conectado el televisor? Llega  
electricidad al tomacorrientes?  
X
X
X
X
X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X  
X
X
Está conectado el interruptor del  
televisor?  
X
X
X
X
X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X  
X
X
Está conectado la antena al terminal del  
panel posterior del televisor?  
Siutilizaunaantenaexterior, cerciórese  
de que el cable no esté dañado.  
X
X
X
X
X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X  
X
X
Compruebe si hay interferencia local.  
Desconecte el interruptor POWER y  
vuelva a conectarlo después de  
transcurrir un minuto.  
X
X
X X X X X X X X X X X X X X  
X
Ajuste el control de COLOR.  
Ajuste el control de MATIZ.  
X
X
X
X
X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X  
X
X
Verifique los productos externos de  
Video/Audio, revise si hay fugas de  
conexiones sueltas o rotas.  
X
X
X X X X X X X X X X X X X X  
X
Compruebe el estado de las pilas del  
mando a distancia.  
X
X
X
X
X X X X X X X X X X X X X X  
X X X X X X X X X X X X X X  
X
X
Desactive (OFF) el modo CLOSED  
CAPTION / Desactive (OFF) el modo  
Ahorro de Energía (Energy Save)  
Desenchufe el televisor y vuelva a  
enchufarlo despúes de dos minutos.  
X
X
X X X X X X X X X X X X X X  
X
Nota:  
• Cuando se ve en modoTEXTO sin recibir emisiones deTEXTO, la pantalla  
puede ponerse en blanco y negro. Si ocurriera ésto, ponga el modo  
CLOSED CAPTION en OFF.  
(Imagen oscura y en blanco)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
Calling for Service  
For location of the nearest SHARP Authorized Service, or to obtain product literature accessories, supplies,  
or customer assistance, please call 1-800-BE-SHARP.  
Limited Warranty  
CONSUMER LIMITED WARRANTY  
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product  
(the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and  
agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new  
or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.  
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set  
forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to  
improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design  
or construction.  
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and  
provide proof of purchase to the servicer.  
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers  
by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS  
FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some  
states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.  
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than  
those described herein, or to extend the duration of any warranties beyond the time period described herein on  
behalf of Sharp.  
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole  
and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time  
described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser  
with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence,  
strict liability or otherwise. In no event shall Sharp be liable or in any way responsible, for any damages or defects  
in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized  
servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or  
property damage. Some states do not allow the exclusion of incidental or consequential damages, so that above  
exclusion may not apply to you.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH  
VARY FROM STATE TO STATE.  
Model Specific Section  
Your Product Model Number & Description:  
Warranty Period for this Product:  
13N-M100B, 13N-M150B, 13N-M100, 13N-M150,13 inch ColorTelevision  
(Be sure to have this information available when you need  
service for your Product.)  
One (1) year parts and 90 days labor. The warranty period  
continues for an additional one (1) year, for a total of two (2)  
years, with respect to the picture tube(s) in the Product for  
parts only. Labor and service are not provided free of charge  
for this additional period.  
Additional Item(s) Excluded from  
Warranty Coverage (if any):  
Non-rechargeable batteries.  
Where to Obtain Service:  
From a Sharp Authorized Servicer located in the United  
States. To find the location of the nearest Sharp Authorized  
Servicer, call Sharp toll free at 1-800-BE-SHARP.  
What to Do to Obtain Service:  
Ship prepaid or carry in your Product to a Sharp Authorized  
Servicer.Be sure to have Proof of Purchase available. If you  
ship the Product, be sure it is insured and packaged securely.  
TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP ORVISIT www.sharp-usa.com  
SHARP ELECTRONICS CORPORATION  
Sharp Plaza, Mahwah, New Jersey 07430-2135  
Printed in Malaysia  
TINS-7209PEZZ  
0P09-MSP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  

Sierra Monitor Corporation Carbon Monoxide Alarm 2001 User Manual
Silex technology Network Card SX 3700WB User Manual
Singer Sewing Machine 114 5 User Manual
Sony Printer UP20 User Manual
Sony VCR SLV SX10EG User Manual
Spirit Gas Grill E 210 310 User Manual
Stiga Trimmer EL 4WD User Manual
Sub Zero Cooktop CT30EU User Manual
Sunbeam Gas Grill WG4610HP User Manual
Sunbeam Microwave Oven SBMW1049SS User Manual