COLORTELEVISION
MODELS
13L-M100B
13L-M150B
L OPERATION MANUAL L
As an ENERGY
S
TAR ® Partner, SHARP has determined that this product meets the
ENERGY
S
TAR ® guidelines for energy efficiency. ENERGY
S
TAR ® is a U.S. registered
trademark.
CONTENTS
PAGE
PAGE
• Video Adjust ..................................................... 11
• Closed Caption ................................................. 12
• Parent Control........................................... 13 ~ 19
• V-CHIP .................................................. 13 ~ 19
• Energy Save ..................................................... 20
• Set Up....................................................... 21 ~ 24
• EZ Setup ....................................................... 21
• Channel Setting ..................................... 22 ~ 24
• Blue Screen ................................................... 24
• Using the Video and Audio Input Jacks ............ 25
• Before Calling for Service ......................... 26 ~ 27
• Calling for Service ............................................ 28
• Limited Warranty ............................................... 28
• Important Information ................................... 2 ~ 3
• Supplied Accessories ......................................... 3
• Before Operating Your Television ....................... 3
• Antenna Connections ................................... 4 ~ 5
• Quick Reference Control Operation.............. 6 ~ 8
• EZ SETUP during First Power On ...................... 9
• Language.......................................................... 10
• Sleep Timer ...................................................... 10
This operating manual includes basic
operating instructions in Spanish and French.
SPANISH is on page 7, 27.
FRENCH is on page 8.
6705 PE
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information (Continued)
WARNING - FCC Regulations state that any unauthorized changes or modifications to this
equipment not expressly approved by the manufacturer could void the user’s authority
to operate this equipment.
Supplied Accessories
Infrared Remote Control/Part Number
RRMCG1324CESA (13L-M100B)
RRMCG1324CESB (13L-M150B)
Size AA
Dry Batteries
Before OperatingYour Television
Location
• For normal operation, yourTV should be located in an area of the room where cool adequate ventilation
is provided. Do not place the back of the television set in a place where free airflow will be restricted.
• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using
magnets or any other magnetic substance, such as iron are kept well away from this TV set.
Power
Your TV operates on 120 Volts, 60 Hertz (normal household current) and has a polarized plug. If you
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.
Note:
• If the set will not be used for a long period, such as during a vacation, unplug the set from the wall
outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near
the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off
either the TV or the radio.
• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to the interference of the TV.
L
Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Insert the batteries
Pull up
Battery
Cover
• With your thumb nail, pull up the slit as indicated by the arrow to remove the back cover. Insert two
batteries (size “AA”). Be sure to match the battery e/d terminals with the e/d marks inside the
compartment.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Connections
Antennas
• The antenna requirements for good color television reception are more important than those for
black & white television reception. For this reason, a good quality outdoor antenna is strongly
recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
F-type connector
1. A 75 ohm system is generally a round cable
with F-type connector that can easily be
attached to a terminal without tools (not
supplied).
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
2. A 300 ohm system is a flat “twin-lead” cable
that can be attached to a 75 ohm terminal
through a 300-75 ohm ADAPTOR (not
supplied).
OUTDOOR ANTENNA CONNECTION
• Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
• Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the
TV set.
A. Combination VHF/UHF Antennas
B. Separate VHF/UHF Antenna
REAR OF TV
VHF/UHF ANTENNA
300/75-ohm
ADAPTOR
VHF
UHF
VHF/UHF ANTENNA
or
CAUTION
IK F ECRC
(Not supplied)
ANTENNA ANTENNA
300-ohm
twin-lead
300-ohm
twin-lead
COMBINER
(not supplied)
CAUTION
I
75-ohm
coaxial cable
300-ohm
twin-lead
ANT/CABLE
75
ANT/CABLE
75
IN OUT
75-ohm coaxial
cable
or
REAR OF TV
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Connections (Continued)
CABLE TV (CATV) CONNECTION
• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber
by the cableTV company.This converter/descrambler is necessary for normal viewing of the scrambled
channels.(Place yourTV on channel 3 or 4, typically one of these channels is used.If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your
cable TV company. One possible method of utilizing the converter/descrambler provided by your
cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s
channel keys.
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/
descrambler using the converter’s channel keys.
RF switch (not supplied)
Two-set
A
signal
OUT
IN
B
Cable TV Line
splitter
(not
supplied)
OUT
IN
Cable TV converter/
descrambler
(not supplied)
Note:
• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that
might be required.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Reference Control Operation
L Location of Controls
(ENGLISH)
Front Panel
POWER
–
VOL
+
CH
VIDEO IN AUDIO
VIDEO/AUDIO INTERMINALS
SENSOR AREA FOR
REMOTE CONTROL
POWER
–
VOL
+
CH
POWER
Press → On.
Press again → Off.
CHANNEL UP/DOWN
VOLUME UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
(+) Increases sound.
(–) Decreases sound.
Basic Remote Control Functions
Infrared Transmitter Window
POWER
INPUT
Press → On.
Press → Switch to external video input
Press again → Off.
mode.
Press again → Switch to TV mode.
See page 25.
REMOTE KEYPAD
Accesses any channel from keypad.
CHANNEL UP/DOWN
FLASHBACK
Returns to previous channel.
(8) Selects next higher channel.
(9) Selects next lower channel.
• See pages 22 ~ 24 for channel
presetting.
• Moves the “ ” mark of the MENU
screen.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press → Accesses MAIN MENU.
MUTE
Press again → Exits MAIN MENU.
Press → Mutes sound.
Press again → Restores sound.
DISPLAY
•
CLOSED CAPTION appears when
sound is muted.
Press → Displays receiving channel for
4 seconds.
Press again → Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
TV
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Referencia rápida de los controles de operación
L Ubicación de los controles
(ESPAÑOL)
Front Delantero
POWER
–
VOL
+
CH
VIDEO IN AUDIO
TERMINALES DE ENTRADA
VIDEO/AUDIO
ZONA DEL SENSOR DEL
MANDO A DISTANCIA
POWER
–
VOL
+
CH
ALIMENTACION (POWER)
Pulsando → Enciende (On).
CANAL SUPERIOR/INFERIOR (CH)
(8) Selecciona el siguiente canal
superior.
(9) Selecciona el siguiente canal
inferior.
Pulsando nuevamente → Apaga (Off).
AUMENTO/DISMINUCION
DEL VOLUMEN (VOL)
(+) Aumenta el sonido.
(–) Disminuye el sonido.
Funciones Basicas Del Control Remoto
Ventanilla del transmisor de infrarrojos
ALIMENTACION (POWER)
Pulsando → Enciende (On).
Pulsando nuevamente → Apaga
(Off).
ENTRADA (INPUT)
Pulsando → Cambìa al modo de
entrada de video externo.
Pulsando nuevamente → Cambìa al
modo de TV.
TECLADO A DISTANCIA
Para tener acceso a cualquier canal
empleando las teclas.
CANAL SUPERIOR/INFERIOR
(CHANNEL UP/DOWN)
(8) Selecciona el siguiente canal
superior.
(9) Selecciona el siguiente canal
inferior.
RETORNO AL CANAL
ANTERIOR (FLASHBACK)
Para volver al canal anterior.
• En el modo de MENU, mueve la
AUMENTO/DISMINUCION
DEL VOLUMEN
marca “
”.
(VOLUME UP/DOWN)
(+) Aumenta el sonido.
(–) Disminuye el sonido.
• En modo de MENU cambia o
selecciona el ajuste del televisor.
MENU (MENU)
Pulsando → Accede al MENU PRIN-
CIPAL.
Pulsando nuevamente → Sale del
MENU PRINCIPAL.
SILENCIAMIENTO (MUTE)
Pulsando → Silencia el sonido.
Pulsando nuevamente → Restaura el
sonido.
• CLOSED CAPTION aparece
automáticamente cuando el sonido
es silenciado. Siempre y cuando la
transmisión tenga esta señal.
TV
VISUALIZACION (DISPLAY)
Pulsando → Aparece el canal de re-
cepción por 4 segundos.
Pulsando nuevamente → Elimina la
visualización.
• En el modo de “Closed Caption” se
muestra el canal de recepción por
un corto tiempo.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Référence rapide sur les commandes
L Emplacement des touches
(FRANÇAIS)
Panneau Avant
POWER
–
VOL
+
CH
VIDEO IN AUDIO
PRISES D’ENTRÉE VIDÉO/AUDIO
ZONE DE DETECTION DU
CAPTEUR
POWER
–
VOL
+
CH
ALIMENTATION (POWER)
Appuyer pour mettre sous tension.
Appuyer de nouveau pour mettre
hors tension.
TOUCHES DES CANAUX
CROISSANT/DÉCROISSANT (CH)
(8) Sélectionne le canal supérieur
suivant.
(9) Sélectionne le canal inférieur
précédent.
AUGMENTATION/RÉDUCTION
DU VOLUME SONORE (VOL)
(+) Pour augmenter le volume du son.
(–) Pour diminuer le volume du son.
Fonctions de base de la télécommande
Fenêtre d’émission du signal infrarouge
ALIMENTATION (POWER)
Appuyer pour mettre sous tension.
Appuyer de nouveau pour mettre hors
tension.
ENTRÉE (INPUT)
Appuyer pour sélectionner le mode
vidèo externe.
Appuyer de nouveau pour sélectionner
la télévision.
PAVE NUMERIQUE DE
COMMANDE A DISTANCE
Sélectionne directement le canal
voulu sur le pavé numérique.
TOUCHES DES CANAUX CROIS-
SANT/DÉCROISSANT
(CHANNEL UP/DOWN)
(8) Sélectionne le canal supérieur
suivant.
(9) Sélectionne le canal inférieur
précédent.
RETOUR (FLASHBACK)
Rappelle le canal regardé précédent.
AUGMENTATION/RÉDUCTION DU
VOLUME SONORE
(VOLUME UP/DOWN)
(+) Pour augmenter le volume du son.
(–) Pour diminuer le volume du son.
• Pour changer ou sélectionner les
réglages du téléviseur en mode
menu.
• Déplace le curseur “
du MENU.
” sur l’écran
RÉGLAGE (MENU)
Appuyer
PRINCIPAL.
→
Accès au MENU
Appuyer de nouveau → Sortie du
MENU PRINCIPAL.
AFFICHAGE (DISPLAY)
Appuyer pour afficher le canal reçu
pendant 4 secondes.
Appuyer de nouveau pour faire
disparaître le canal.
• Pour afficher temporairement le
canal reçu en le mode Sous-titres.
SOURDINE (MUTE)
Appuyer → Mise en sourdine du son.
Appuyer de nouveau → Rétablisse-
ment du son.
• CLOSED CAPTION apparaît lorsque
le son est mis en sourdine.
TV
8
Download from Www.Somanuals.com. All Manuals Search And Download.
EZ SETUP during First Power On
L
When you turn on the TV for the first time, it will automatically
memorize the broadcasting channels.
POWER
Please perform the following instructions before you press the
power button.
(1) Insert the batteries into the remote control. (See page 3)
(2) Connect the antenna cable to the TV set. (See page 4 ~ 5)
(3) Plug in the AC POWER cord to the wall outlet.
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
1 Press the POWER button on the TV set or on the Remote Control
to turn on the TV. The SELECT LANGUAGE mode will be
displayed.
SE L ECT L ANGUAGE
ENGL I SH
ESPAÑOL
FRANCA I S
SE L ECT : CH8 / 9
(Remote Control)
(On the Set)
SE T
: VOL + / –
POWER
(SELECT LANGUAGE mode)
2 Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH
SE L ECT L ANGUAGE
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
ENGL I SH
ESPAÑOL
FRANCA I S
SE L ECT : CH8 / 9
SE T
: VOL + / –
3 Press VOL (+) or (–) to access EZ SETUP mode.
CONNECT ANT ENNA
OR CAB L E .
ST ART E Z SE TUP ?
YES : VOL +
NO : VOL –
(EZ SETUP mode)
4 Press VOL (+).
The tuner will automatically search for the
broadcasting and cable TV channels.(The CH No.
will automatically increase when it appears.)
P L EASE WA I T
AUTO PROGRAMM I NG
If you want to stop the EZ SETUP process once it
has started, press VOL (–) and it will be canceled.
1 8
S TOP : VOL –
If you want to SETUP again, please refer to page
21 on SETUP.
To cancel EZ SETUP
Press VOL (–).
5 Once EZ SETUP is completed, the smallest channel number
memorized will be displayed.
2
Note:
• If EZ SETUP does not memorize all the channels in your region, please refer to page 22 for more
information on manual memorizing the channels using CHANNEL SETTING.
• It may be difficult to PRESET when the broadcasting signals are weak, the channel cycle frequency
is incorrect or the frequency jamming is occuring around the area. Please refer to pages 22 ~ 24 for
more information on manual memorizing the channels using CHANNEL SETTING.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Language
L
L
The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
Setting the ON SCREEN DISPLAY Language.
1 Press MENU to access MAIN MENU screen.
S L EEP T I MER
V I DEO AD J US T
C LOSED CAP T I ON
PARENT CONTROL
ENERGY SAVE
SE T UP
(MAIN MENU screen)
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET
S L EEP T I MER
V I DEO AD J US T
C LOSED CAP T I ON
PARENT CONTROL
ENERGY SAVE
SE T UP
UP”.
3 Press VOL (+) or (–) to access SET UP mode, then press CH UP
B L UE SCREEN
L ANGUAGE
CH SE T T I NG
(8) or DOWN (9) to move the “ ” mark to “LANGUAGE”.
→
(SET UP mode)
4 Press VOL (+) or (–) to access LANGUAGE change mode.
L ANGUAGE
ENGL I SH
ESPAÑOL
FRANCA I S
(LANGUAGE change mode)
5 Press CH UP (8) or DOWN (9) to select “ENGLISH”, “SPANISH
I D I OMA
(ESPAÑOL)” or “FRENCH (FRANÇAIS)”.
ENGL I SH
ESPAÑOL
FRANCA I S
6 Press MENU to exit.
Sleep Timer
L
You can set the number of minutes for your TV to automatically turn off.
1 Press MENU to access MAIN MENU screen.
S L EEP T I MER
V I DEO AD J US T
C LOSED CAP T I ON
PARENT CONTROL
ENERGY SAVE
SE T UP
2 Press VOL (+) or (–) to access TIMER SET mode.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to set a sleep time of 30, 60, 90 or 120
S L EEP T I MER
1 2 0 REMA I N
minutes.
4 Press MENU to exit.
→
Note:
(TIMER SET mode)
• To turn off the Sleep Timer, repeat the above SLEEP TIMER steps and select “– – – REMAIN” during
step 3.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Adjust
Description of Adjustment Items
VOLUME
(+)/(–)
Selected
item
VOL UP (+) button
VOL DOWN (–) button
CHANNEL
UP (8)/
DOWN (9)
PICTURE
TINT
To increase contrast
To decrease contrast
To make skin tones greenish
To increase color intensity
To increase brightness
To increase sharpness
To make skin tones purplish
To decrease color intensity
To decrease brightness
To decrease sharpness
MENU
COLOR
BRIGHT
SHARP
FAVORITE
COLOR
To choose a RED, BLUE or STANDARD COLOR TONE.
RESET
To return all adjustments to factory preset levels.
1 Press MENU to access MAIN MENU screen.
S L EEP T I MER
V I DEO AD J US T
C LOSED CAP T I ON
PARENT CONTROL
ENERGY SAVE
SE T UP
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “VIDEO
ADJUST”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access PICTURE adjust mode.
P I CTURE
2 7
–
+
(PICTURE adjust mode)
4 Press CH UP (8) or DOWN (9) to select the desired mode.
(Refer to the diagram below.)
TINT
BRIGHT
SHARP
PICTURE
COLOR
FAVORITE COLOR
RESET
: CH UP (8)
: CH DOWN (9)
5 Press VOL (+) or (–) to adjust the setting.
P I CTURE
2 7
–
+
VOL UP (+)
increase contrast
VOL DOWN (–)
decrease contrast
6 Repeat steps 4 to 5 to adjust other settings.
7 Press MENU to exit.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Closed Caption
L
HOWTO SET CLOSED CAPTION
• YourTV is equipped with an internal Closed Caption decoder.“Closed
Caption” is a system which allows you to view conversations, narration,
and sound effects in TV programs and home videos as subscript on
your TV screen as shown on the right.
• Not all the programs and videos will offer closed caption. Please look
for the “
” symbol to ensure that captions will be shown.
VOLUME
(+)/(–)
• Closed Caption broadcast can be viewed in two modes: CAPTION
andTEXT.For each mode, two channels are available, CH1 and CH2:
CHANNEL
UP (8)/
DOWN (9)
The [CAPTION] mode subscripts dialogues and commentaries of TV
dramas and news programs while allowing clear view of the picture.
The [TEXT] mode displays over the picture other various information
(such as TV program schedule, weather forecast, etc.) that is
independent of the TV programs.
MENU
1 Press MENU to access MAIN MENU screen.
S L EEP T I MER
V I DEO AD J US T
C LOSED CAP T I ON
PARENT CONTROL
ENERGY SAVE
SE T UP
2 Press CH UP (8) or DOWN (9) to move the “ ”mark to “CLOSED
CAPTION”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access CLOSED CAPTION setting mode.
C LOSED CAP T I ON
MODE
DA T A
: CAPT I ON
: CH
1
(CLOSED CAPTION setting mode)
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to either
C LOSED CAP T I ON
“MODE” or “DATA”.
MODE
DA T A
: CAPT I ON
: CH
1
5 Press VOL (+) or (–) to change the CLOSED CAPTION setting.
C LOSED CAP T I ON
CH 1
DATA :
CAPTION
MODE :
MODE
DA T A
: CAPT I ON
: CH
1
CH 2
TEXT
OFF
6 Press MENU to exit.
Note:
• If a broadcast has CLOSED CAPTION and the MUTE button is pressed, the set enters [CAPTION]
mode automatically. Pressing MUTE again will return the set to its previous condition.
• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor
or if there are problems at the broadcast source. This does not necessarily indicate a problem with
your set.
• If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION
broadcast, the closed captions will disappear momentarily.
• When viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen
may become dark and blank. Should this occur, set the Closed Caption mode to “OFF”.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation)
L V-CHIP
• This function allows you to restrict TV programs and also allows you to control TV usage based on
FCC data. This function is to prevent your children from watching violence or sexual scenes that may
be harmful.
• Restriction ofTV programs includes two characters that contain information about the program’s MPAA
rating and theTV Parental Guidelines. MPAA is restricted by age.TV Parental Guidelines are restricted
by age and contents.
• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for
complete control.
[1] MPAA RATING
RATING
G
GENERAL AUDIENCES. All ages admitted.
PG
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for
children.
PG-13
PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate
for children under 13.
age
base
R
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NO ONE 17 AND UNDER ADMITTED.
NC-17
X
X Rating is an older rating that is unified with NC-17 but may be encoded on
older movie’s data.Note:
• MPAA RATING (Example)
Example 1.
1. User setting
2. Block table
not to
block
“PG-13” in the age based RATING is blocked, this
will automatically block the high ratings “R”, “NC-
17”, “X” also.
G
– – – – –
G
not to
block
PG
– – – – –
PG
Select
block
auto-
block
PG-13 BLOCK
BLOCK
NC-17 BLOCK
BLOCK
PG-13
R
age
base
R
auto-
block
auto-
block
NC-17
X
X
Example 2.
1. User setting
2. Block table
not to
block
“R” in the age based RATING is blocked, this will
automatically block the high rating “NC-17”, “X”
also.
G
– – – – –
G
not to
block
PG
– – – – –
PG
not to
block
Select
block
PG-13 – – – – –
BLOCK
NC-17 BLOCK
BLOCK
PG-13
R
age
base
R
auto-
block
auto-
block
NC-17
X
X
ote:
Note:
• MPAA RATING is only age based ratings.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
[2] TV PARENTAL GUIDELINES
content base
y
x
FV
V
S
L
D
RATING
(Fantasy (Violence) (Sexual
(Adult
(Sexually
Violence)
Situation) Language) Suggestive
Dialog)
TV-Y (All children)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
TV-Y7 (Direct to Older Children)
TV-G (General Audience)
E
X
age
base
TV-PG (Parental Guidance
Suggested)
X
X
X
X
X
TV-14 (Parents Strongly
Cautioned)
X
X
X
X
X
X
X
X
X
D
TV-MA (Mature Audience Only)
X
X : Content Rating can be set but this Rating is not normally broadcast by TV Station.
X : Content Rating can be set.
• TV-PARENTAL GUIDELINES (Example)
Example 1.
If “TV-Y7” in age based-rating is “BLOCK” then this will automatically block the higher ratings “TV-G”,
“TV-PG”, “TV-14” and “TV-MA”.Furthermore, the “D”, “L”, “S”, “V”, “FV” in “CONTENT”are automatically
block for “TV-Y7” as well unless you choose to unblock for each one.
1. User setting
2. Block table
content base
S
FV
V
L
D
TV-Y
TV-Y7 BLOCK
TV-G BLOCK
– – – – –
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
age
base
TV-PG BLOCK
TV-14 BLOCK
TV-MA BLOCK
BLOCK CONTENT (D L S V FV)
Select
block
auto-
block
TV-Y7
Example 2.
All item in the age based RATING is not blocked, “D” in content based ratings will be blocked as below.
(2. Block table)
1. User setting
2. Block table
content base
S
FV
V
L
D
TV-Y
TV-Y7 – – – – –
TV-G – – – – –
– – – – –
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
age
base
TV-PG – – – – –
TV-14 – – – – –
TV-MA – – – – –
BLOCK CONTENT (D
)
auto-
block
TV-Y7
Note:
• Age-based ratings can be modified by the content-based ratings but only in the combinations indicated
by an X in the table above.
• Choosing lower age-based rating blocks the higher age-based ratings regardless of content ratings
settings.
• If you set TV-Y and TV-Y7 to BLOCK, CONTENT will display all item.
[3] ADDITIONAL MODE
Besides the above “MPAA RATINGS” and “TV PARENTAL GUIDELINES” new ratings system’s data
can be downloaded when they become available. (See page 18.)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
LHOW TO SET V-CHIP
REMOTE
KEYPAD
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
[1] MPAA RATING
1 Press MENU to access MAIN MENU screen.
S L EEP T I MER
V I DEO AD J US T
C LOSED CAP T I ON
PARENT CONTROL
ENERGY SAVE
SE T UP
(MAIN MENU screen)
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “PARENT
S L EEP T I MER
V I DEO AD J US T
C LOSED CAP T I ON
PARENT CONTROL
ENERGY SAVE
SE T UP
CONTROL”.
3 Press VOL (+) or (–) to access PARENT CONTROL mode, then
PARENT CONTROL
press VOL (+) or (–) to access V-CHIP select mode.
V – C
H
I P B LOCK
(PARENT CONTROL mode)
4 Press VOL (+) or (–) to access “MPAA RATING”.
MPAA
T V GU I DE L I NES
DO
S T A TUS
W
N LOAD : OF F
: OF F
(V-CHIP select mode)
5 Press CH UP (8) or DOWN (9) to move the “ ” mark to "PG",
then press VOL (+) or (–) to select BLOCK. If you set “PG” to
BLOCK, “PG-13”, “R”, “NC-17” and “X” are automatically blocked.
G
: –––––
: BLOCK
: BLOCK
: BLOCK
: BLOCK
: BLOCK
PG
PG–1 3
R
NC–1 7
X
MENU : RETURN
→
6 Repeat pressing MENU to return V-CHIP select mode exit.
Note:
Ex.
• If you set “G” to BLOCK , all RATING are automatically blocked.
• If you set “X” to BLOCK, “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
[2] TV GUIDELINES
1 Repeat steps 1 to 3 of [1] MPAA RATING.
MPAA
T V GU I DE L I NES
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “TV
GUIDELINES”.
DO
S T A TUS
W
N LOAD : OF F
: OF F
3 Press VOL (+) or (–) to access TV GUIDELINES mode.
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
: –––––
: BLOCK
: BLOCK
: BLOCK
: BLOCK
: BLOCK
BLOCK CONTENT
:
( D
L
S
V
FV )
MENU : RETURN
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to “TV-
Y7”, then press VOL (+) or (–) to select BLOCK. If you set “TV-Y7”
to BLOCK, “TV-G”, “TV-PG”, “TV-14” and “TV-MA” are
automatically blocked, then CONTENT “D”, “L”, “S”, “V” and “FV”
are also.
(TV GUIDELINES mode)
→
5 Repeat pressing MENU to exit.
1 If you want to change BLOCK CONTENT, press CH UP (8) or
TV–Y
TV–Y7
TV–G
TV–PG
TV–14
TV–MA
: –––––
: BLOCK
: BLOCK
: BLOCK
: BLOCK
: BLOCK
DOWN (9) to move the “ ” mark to “BLOCK CONTENT”.
BLOCK CONTENT
:
( D
L
S
V
FV )
MENU : RETURN
2 Press VOL (+) or (–) to access CONTENT RATING mode, then
press CH UP (8) or DOWN (9) to move each CONTENT item
and press VOL (+) or (–) to select “BLOCK” or “– – – – –” (unblock)
for each one.
D
L
S
V
: B L OCK
: B L OCK
: B L OCK
: B L OCK
: B L OCK
F V
MENU : RE T URN
→
(CONTENT RATING mode)
3 Repeat pressing MENU to returnTV GUIDELINES mode, V-CHIP
select mode to exit.
Note:
Ex.
• If you set “TV-14” to BLOCK, “TV-MA” are automatically blocked. CONTENT “D”, “L”, “S” and “V”
are automatically blocked by an X in the table on page 14.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
[3] ACTIVATE ON TO TURN ON V-CHIP BLOCK
1 Press CH UP (8) or DOWN (9) to move the “ ” mark to
MPAA
T V GU I DE L I NES
“STATUS”, then press VOL (+) or (–) to activate ON the V-CHIP
BLOCK. (If STATUS is OFF, V-CHIP BLOCK will not be operated.)
DO
S T A TUS
W
N LOAD : OF F
: ON
→
2 Press MENU, then “INPUT SECRET No.” will be displayed.
I NPUT SECRE T N o .
–
–
–
–
3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD.
I NPUT SECRE T N o .
1
2
3
4
4 Press MENU and SECRET No. is registered.
L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has been activated.
1 “V-CHIP HAS BEEN ACTIVATED” will be displayed if you watch
2 3
the program with Program Rating data as same as you configured.
V –CH I P HAS BEEN
ACT I VA T ED
T V – Y 7
F V
Note:
• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.
2 Press MENU, then “INPUT SECRET No.” will be displayed.
I NPUT SECRE T N o .
–
–
–
–
3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD, then
V-CHIP BLOCK temporarily will be canceled.If the wrong SECRET
No. is chosen, “SECRET No. IS INCORRECT” will be displayed.
Input the SECRET No. again in this case.
I NPUT SECRE T N o .
∗
∗
∗
∗
Note:
• If you change Power from OFF to ON, then V-CHIP BLOCK will be activated ON again.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
LTo change the V-CHIP BLOCK setting. (Secret No. is registered.)
1 Repeat steps 1 to 3 of [1] MPAA RATING, then “INPUT SECRET
No.” will be displayed.
I NPUT SECRE T N o .
–
–
–
–
2 Enter the 4-digit SECRET No. using the REMOTE KEYPAD
and the V-CHIP select mode will be displayed. Repeat
configuration of the V-CHIP BLOCK.
I NPUT SECRE T N o .
∗
∗
∗
∗
LIf you intend to change or forget your Secret No., clear the original Secret No. and set
up a new one.
1 Repeat steps 1 to 3 of [1] MPAA RATING, or 1 to 2 of [L To
cancel the V-CHIP BLOCK screen while V-CHIP BLOCK has
been activated], then “INPUT SECRET No.” will be displayed.
(On the Set)
2 Press and hold both CH UP (8) and DOWN (9) on the TV set
simultaneously until the message “INPUT SECRET No.”
disappears.
CH
CHANNEL UP/DOWN
buttons
3 Press MENU two times to exit.
[3]-A. Additional mode (DOWNLOAD)
There will be an additional new rating system. In that case, please set up as follows.
Subsequently the new rating system will set up automatically.
1 Repeat steps 1 to 3 of [1] MPAA RATING.
MPAA
T V GU I DE L I NES
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to
“DOWNLOAD”.
DOWN LOAD : OF F
S T A TUS
MPAA
: OF F
3 Press VOL (+) or (–) to “DOWNLOAD : ON”.
T V GU I DE L I NES
DO
S T A TUS
W
N LOAD : ON
: OF F
4 Repeat pressing MENU to return exit.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP Operation Continued)
LDOWNLOAD V-CHIP DATA
REMOTE
KEYPAD
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
1 If you watch the program with “New Rating System Data”,
P L EASE WA I T
DOWNLOAD screen will be displayed.
NO
W
DO
WN LOAD I NG
V – CH I P DA T A
(DOWNLOAD screen)
2 DOWNLOAD screen will disappear, if DOWNLOAD is finished.
Note:
• DOWNLOAD would not be started, if you don’t watch the program with “New Rating System
Data”.
[3]-B. Additional mode (Example)
1 Repeat steps 1 to 2 of [4] Additional mode.
MPAA
TV GU I DEL I NES
Cdn . Eng l i sh Ra t i ngs
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “Cdn.
Cdn . F r enc h Ra t i ngs
English Ratings”, then press VOL (+) or (–).
DO
W
NLOAD : ON
STATUS
: ON
→
(After download the rating data)
3 You can select “BLOCK”or “– – – – –” (unblock) from each RATING
C
C8+
G
PG
14+
18+
: –––––
: BLOCK
: –––––
: BLOCK
: –––––
: BLOCK
mode by pressing CH UP (8) or DOWN (9) and VOL (+) or (–).
I ND I V I DUAL BLOCK
MENU : RETURN
(ENGLISH INDIVIDUAL BLOCK mode)
4 You can select “BLOCK”or “– – – – –” (unblock) from each RATING
mode by pressing CH UP (8) or DOWN (9) and VOL (+) or (–) if
you select “Cdn. French Ratings” in step 2.
G
: –––––
: BLOCK
: –––––
: BLOCK
: –––––
8+
13+
16+
18+
I ND I V I DUAL BLOCK
MENU : RETURN
(FRENCH INDIVIDUAL BLOCK mode)
Note:
• In additional mode
Including two types (English mode, French mode), altogether you are able to download 4 kinds
of mode.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Energy Save
VOLUME
(+)/(–)
L
This feature lets you lower the power consumption of your TV
set which in turn saves you money and minimizes the impact on
the environment. When this feature is turned on, it reduces the
brightness of theTV to a level that consumes approximately 20%
less energy than when the feature is turned off.
CHANNEL
UP (8)/
DOWN (9)
MENU
The reduction in brightness will be less noticeable under low
room lighting conditions.
1 Press MENU to access MAIN MENU screen.
S L EEP T I MER
2 Press CH UP (8) or DOWN (9) to move the “ ”mark to“ENERGY
V I DEO AD J US T
C LOSED CAP T I ON
PARENT CONTROL
ENERGY SAVE
SE T UP
SAVE”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access ENERGY SAVE select mode.
ENERGY SAVE
: OF F
(ENERGY SAVE select mode)
4 Press VOL (+) or (–) to select “ON”.
ENERGY SAVE
: ON
5 Press MENU to exit.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up
L
EZ SETUP
By operating the channel presetting functions, you can preset
your TV to the desired channels for viewing.
REMOTE
KEYPAD
VOLUME
(+)/(–)
CHANNEL
UP (8)/
DOWN (9)
MENU
1 Press MENU to access MAIN MENU screen.
S L EEP T I MER
V I DEO AD J US T
C LOSED CAP T I ON
PARENT CONTROL
ENERGY SAVE
SE T UP
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET
UP”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access SET UP mode, then press CH UP
B L UE SCREEN
L ANGUAGE
(8) or DOWN (9) to move the “ ” mark to “CH SETTING”.
CH SE T T I NG
→
(SET UP mode)
4 Press VOL (+) or (–) to access CH SETTING mode.
E Z SE TUP
A I R / CAB L E
CH SEARCH
CH MEMORY
(CH SETTING mode)
5 Press VOL (+) or (–) to access EZ SETUP mode.
CONNECT ANT ENNA
OR CAB L E .
ST ART E Z SE TUP ?
YES : VOL +
NO : VOL –
(EZ SETUP mode)
6 Press VOL (+).
P L EASE WA I T
The tuner will automatically search for the
broadcasting and cable TV channels.(The CH No.
will automatically increase when it appears.)
AUTO PROGRAMM I NG
If you want to stop the EZ SETUP process once it
has started, press VOL (–). Search will be
canceled.
1 8
S TOP : VOL –
To cancel EZ SETUP
Press VOL (–).
7 Once EZ SETUP is completed, the smallest channel number
memorized will be displayed.
2
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up (Continued)
L
CHANNEL SETTING
If EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel.
1 Press MENU to access MAIN MENU screen.
S L EEP T I MER
V I DEO AD J US T
C LOSED CAP T I ON
PARENT CONTROL
ENERGY SAVE
SE T UP
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET
UP”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access SET UP mode.
B L UE SCREEN
L ANGUAGE
CH SE T T I NG
4 Press CH UP (8) or DOWN (9) to move the “ ” mark to “CH
SETTING”.
→
(SET UP mode)
5 Press VOL (+) or (–) to access CH SETTING mode.
E Z SE TUP
A I R / CAB L E
CH SEARCH
CH MEMORY
(CH SETTING mode)
6 Press CH UP (8) or DOWN (9) to move the “ ” mark to “AIR/
E Z SE TUP
A I R / CAB L E
CH SEARCH
CH MEMORY
CABLE”, then press VOL (+) or (–) to access AIR/CABLE mode.
→
7 Press CH UP (8) or DOWN (9) to move the “ ” mark to the
A I R / CAB L E
desired mode.
A I R
CAB L E S TD
CAB L E HRC
CAB L E I RC
CABLE STD
CABLE HRC
CABLE IRC
AIR
(AIR/CABLE mode)
8 Press MENU to exit.
Note:
• Receivable channels of your TV set are:
AIR channels:
CABLE channels:
1 (HRC and IRC mode only)
2 through 125 (STD, HRC and IRC)
VHF: 2 through 13.
UHF: 14 through 69.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up (Continued)
L
Saving broadcastTV channels into memory.
1.1 Press MENU to access MAIN MENU
screen, then press CH UP (8) or DOWN
(9) to move the “ ” mark to “SET UP”.
E Z SE TUP
A I R / CAB L E
CH SEARCH
CH MEMORY
→
1.2 Press VOL (+) or (–) to access SET UP
mode, then press CH UP (8) or DOWN
(9) to move the “ ” mark to “CH
SETTING”.
→
(CH SETTING mode)
1.3 Press VOL (+) or (–) to access CH
SETTING screen.
1.4 Press CH UP (8) or DOWN (9) to move
the “ ”mark to “CH SEARCH”, then press
VOL (+) or (–) to access CH SEARCH
screen.
→
START
(START)
CH SEARCH
2.1 Press VOL (+). The tuner will search
through all available channels in your area
and add them into the TV’s memory.
A I R
1 2
S T ART : +
S TOP : –
(STOP)
STOP
2.2 Press VOL (–). CH SEARCH will stop at
the current channel and will not add any
higher channels.
(CH SEARCH mode)
2.3 Press MENU to exit.
L
Adding weak or additional channels or erasing unwanted channels from TV memory.
1.1 Press MENU to access MAIN MENU
screen, then press CH UP (8) or DOWN
(9) to move the “ ” mark to “SET UP”.
E Z SE TUP
A I R / CAB L E
CH SEARCH
CH MEMORY
→
1.2 Press VOL (+) or (–) to access SET UP
mode, then press CH UP (8) or DOWN
(9) to move the “ ” mark to “CH
SETTING”.
→
(CH SETTING mode)
1.3 Press VOL (+) or (–) to access CH
SETTING mode, then press CH UP (8) or
DOWN (9) to move the “ ” mark to “CH
MEMORY”.
→
2.1 Press VOL (+) or (–) to access CH
MEMORY.
2.2 Use CH UP (8) or DOWN (9) or REMOTE
KEYPAD to select each desired channel
to add or erase.
or
2.3 Press VOL (+) to add a channel to theTV’s
memory or press VOL (–) to erase a
channel from the TV’s memory.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up (Continued)
VOLUME
(+)/(–)
2.4 Press MENU to exit.
VOL (+)
CHANNEL
UP (8)/
DOWN (9)
To add channel 12 to
CH MEMORY
A I R 1 2
CH MEMORY
the TV memory
A I R
1 2
MENU
TO ADD
: +
VOL (–)
TO ERASE : –
To erase channel 12 from
the TV memory
(CH MEMORY
unmemorized channel)
(CH MEMORY
memorized channel)
Note:
• If you press VOL (+) again while in the CH SEARCH mode, auto-program will start again, and the
previously memorized channels will be lost.
L
BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not
received.
1 Press MENU to access MAIN MENU screen.
S L EEP T I MER
V I DEO AD J US T
C LOSED CAP T I ON
PARENT CONTROL
ENERGY SAVE
SE T UP
2 Press CH UP (8) or DOWN (9) to move the “ ” mark to “SET
UP”.
→
(MAIN MENU screen)
3 Press VOL (+) or (–) to access SET UP mode.
B L UE SCREEN
L ANGUAGE
CH SE T T I NG
(SET UP mode)
4 Press VOL (+) or (–) to access BLUE SCREEN select mode.
B LUE SCREEN
: OF F
(BLUE SCREEN select mode)
5 Press VOL (+) or (–) to select “ON”.
B LUE SCREEN
: ON
6 Press MENU to exit.
Note:
• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal.To continue watching TV under these conditions, switch
the BLUE SCREEN “OFF”.
• While VCR input mode is selected, the BLUE SCREEN will not be shown on your TV even if the
BLUE SCREEN is turned on.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Video and Audio Input Jacks
L
Connecting video equipment for playback of video material.
• When the television is connected to video equipment as shown below, the material being played
back on the video equipment can be seen on the television screen.
Connecting video device equipped with video output terminal.
CONNECTIONS
(Front connection
terminals of TV)
VIDEO EQUIPMENT
VIDEO IN AUDIO
CAMCORDER
To VIDEO OUTPUT
To AUDIO OUTPUT
TV GAME
VCR
L
To watch video material playback.
• Press the Remote’s INPUT to select VIDEO INPUT mode to which the video equipment you want to
playback is connected.
• The external VIDEO INPUT mode will change as follows each time the INPUT is pressed.
AIR
or
CABLE
INPUT
(Front)
• INPUT mode can be selected by pressing either the CH UP (8) on the TV remote control when the
TV is set to the highest channel stored in memory, or by pressing the CH DOWN (9) when it is set to
the lowest channel.
Note:
• When connecting video or audio equipment to the television, be sure that the power is turned off in
order to prevent damage to either the television or the equipment being connected.
• It is the intent of SHARP that this product be used in full compliance with the copyright law of the
United States and that prior permission be obtained from copyright owners whenever necessary.
• For detailed information on the connection and use of auxiliary equipment, refer to the instruction
manuals of the equipment being used.
• The connection cords can be obtained from your local video store.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Calling for Service
Check these items and see if you can correct trouble with a slight adjustment of the controls.
QUICK SERVICE
CHECK LIST
POSSIBLE REMEDY
Try a new channel, if OK, then possible station
trouble.
X X X X X X X X X X X X X X X X X
Is TV plugged in? Power at outlet?
Is TV’s POWER button on?
X X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X
Isantennaconnectedtoterminalonthebackof
the set?
X X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X
If outside antenna is being used, check for
broken wire.
Checkforlocalinterferenceorexternalelectrical
noise.
X X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X
Turn off with POWER button and then turn it on
after about a minute.
Adjust COLOR control.
Adjust PICTURE control.
X X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X
Check external Video/Audio products: look for
loose/broken connection leads. (Refer to page
25)
X X X X X X X X X X X X X X X X X
Check batteries of Remote Control.
X X X X X X X X X X X X X X X X X
X X X X X X X X X X X X X X X X X
ChangeClosedCaptionmodeto“OFF”/Energy
Save mode to “OFF”.
Unplug the TV and plug it in again after 2
minutes.
X X X X X X X X X X X X X X X X X
Note:
• When viewing in TEXT mode, if no TEXT broadcast is being received, the screen
may become dark and blank. Should this occur, set the Closed Caption mode to
“OFF”.
(Dark and Blank Picture)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Antes de llamar al servicio de reparaciones
Verifique estos items para ver si usted mismo puede solucionar el problema.
LISTA DE COMPROBACIONES
DE SERVICIORAPIDO
POSIBLE SOLUCIÓN
Pruebe con otro canal y si todo está
bien, el problema puede ser de la
emisora.
X
X
X
X
X X X X X X X X X X X X X X
X X X X X X X X X X X X X X
X
X
Está conectado el televisor? Llega
electricidad al tomacorrientes?
Está conectado el interruptor del
televisor?
Está conectado la antena al terminal del
panel posterior del televisor?
X
X
X
X
X X X X X X X X X X X X X X
X X X X X X X X X X X X X X
X
X
Siutilizaunaantenaexterior, cerciórese
de que el cable no esté dañado.
X
X
X
X
X X X X X X X X X X X X X X
X X X X X X X X X X X X X X
X
X
Compruebe si hay interferencia local.
Desconecte el interruptor POWER y
vuelva a conectarlo después de
transcurrir un minuto.
X
X
X X X X X X X X X X X X X X
X
Ajuste el control de COLOR.
Ajuste el control de MATIZ.
X
X
X
X
X X X X X X X X X X X X X X
X X X X X X X X X X X X X X
X
X
Verifique los productos externos de
Video/Audio, revise si hay gufas de
conexiones sueltas o rotas.
X
X
X X X X X X X X X X X X X X
X
Compruebe el estado de las pilas del
mando a distancia.
X
X
X
X
X X X X X X X X X X X X X X
X X X X X X X X X X X X X X
X
X
Desactive (OFF) el modo CLOSED
CAPTION / Desactive (OFF) el modo
Ahorro de Energía (Energy Save)
Desenchufe el televisor y vuelva a
enchufarlo despúes de 2 minutos.
X
X
X X X X X X X X X X X X X X
X
Nota:
• Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la pantalla puede
ponerse en blanco y negro.Si ocurriera ésto, ponga el modo CLOSED CAPTION en
OFF.
(Imagen oscura y en blanco)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling for Service
For location of the nearest Sharp Authorized Service, or to obtain product literature accessories,
supplies, or customer assistance, please call 1-800-BE-SHARP.
Limited Warranty
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product
(the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and
agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new
or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set
forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to
improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design
or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and
provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers
by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some
states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than
those described herein, or to extend the duration of any warranties beyond the time period described herein on
behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole
and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time
described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser
with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence,
strict liability or otherwise. In no event shall Sharp be liable or in any way responsible, for any damages or defects
in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized
servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or
property damage. Some states do not allow the exclusion of incidental or consequential damages, so that above
exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH
VARY FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
Warranty Period for this Product:
13L-M100B/13L-M150B, 13 inch Color Television
(Be sure to have this information available when you need
service for your Product.)
One (1) year parts and 90 days labor. The warranty period
continues for an additional one (1) year, for a total of two (2)
years, with respect to the picture tube(s) in the Product for
parts only. Labor and service are not provided free of charge
for this additional period.
Additional Item(s) Excluded from
Warranty Coverage (if any):
Non-rechargeable batteries.
Where to Obtain Service:
From a Sharp Authorized Servicer located in the United
States. To find the location of the nearest Sharp Authorized
Servicer, call Sharp toll free at 1-800-BE-SHARP.
What to Do to Obtain Service:
Ship prepaid or carry in your Product to a Sharp Authorized
Servicer.Be sure to have Proof of Purchase available. If you
ship the Product, be sure it is insured and packaged securely.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
Printed in Malaysia
TINS-6705PEZZ
T2177-A 9P06-MSP
28
Download from Www.Somanuals.com. All Manuals Search And Download.
|