MODEL: MX-M182
MX-M182D
MX-M202D
MX-M232D
DIGITAL MULTIFUNCTIONAL SYSTEM
OPERATION GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
4
6
●
7
●
●
8
5
....................................................................... 104
●
●
2
Download from Www.Somanuals.com. All Manuals Search And Download.
9
●
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
This manual describes the copier, printer, and scanner functions of the MX-M182/MX-M182D/MX-M202D/MX-M232D
digital multifunctional system.
• Where "MX-XXXX" appears in this manual, please substitute the name of your model for "XXXX". For the name
• The screen images and procedures that appear in this manual are mainly for Windows Vista. With other
versions of Windows, some screen images may be different from those in this manual.
Note
• For information on using your operating system, refer to your operating system's manual or online Help.
The display screens, messages, and key names shown in the manual may differ from those on the actual machine
due to product improvements and modifications.
USING THE MANUAL
This machine has been designed to provide convenient copying features in a minimum amount of office space and
with maximum operational ease. To get full use of all machine features, be sure to familiarise yourself with this
manual and the machine. For quick reference during machine use, SHARP recommends printing out this manual
and keep it in a handy location.
ABOUT THE MANUALS
The manuals for the machine are as follows:
Start Guide
This manual explains:
• Specifications
• Cautions for using the machine in safety
Operation Guide (on the accessory CD-ROM)
This manual explains:
• How to install the software that allows the machine to be used as a printer and scanner for your computer
• Part names of the machine
• Available paper type for this machine
• Basic copy procedure and advanced copy functions
(For example: rotating the image 90 degrees, copying multiple originals onto a single sheet of paper)
• Basic print procedure and other frequently used print functions
(For example: fitting the printed image to the paper, enlarging/reducing the print image)
• Scanning on the machine and from a computer
• Toner cartridge replacement and peripheral devices
• Troubleshooting for using the machine
THE MEANING OF "R" IN ORIGINAL AND PAPER SIZE
INDICATIONS
An "R" appearing at the end of an original or paper size (A4R (5-1/2" x 8-1/
2"R, 8-1/2" x 11"R), etc.) indicates that the original or paper is oriented
horizontally as shown on the right.
Sizes that can be placed only in the horizontal (landscape) orientation (B4,
A3 (8-1/2" x 14", 11" x 17")) do not contain the "R" in their size indication.
<Horizontal (Landscape) orientation>
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONVENTIONS USED IN THIS MANUAL
Warns the user that injury may result if the contents of the warning are not properly followed.
Warning
Caution
Note
Cautions the user that damage to the machine or one of its components may result if the contents
of the caution are not properly followed.
Notes provide information relevant to the machine regarding specifications, functions,
performance, operation and such, that may be useful to the user.
SPF
This manual refers to the Single Pass Feeder as the "SPF".
RSPF
This manual refers to the Reversing Single Pass Feeder as the "RSPF".
DIFFERENCES BETWEEN MODELS
This manual covers the following models.
Model
MX-M202D/MX-M232D
MX-M182/MX-M182D
(With optional SPF/RSPF installed)
(With optional SPF/RSPF installed)
Appearance
The above illustration is used in
instances where a function and/
or the operation of the machine
is the same on both models.
Copy speed
Paper trays
20CPM/23CPM
Two (250 x 2)
18CPM
One (250 x 1)
AB series (metric) and inch series references
Both specifications are quoted where applicable.
For example:
Start Guide...........................50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%, 200% (50%, 64%, 77%, 95%,
100%, 121%, 129%, 141%, 200%)
Although AB series size indications are shown on the operation panel of this manual, inch series indications are
displayed on the inch series machines.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
SETUP
1
BEFORE SOFTWARE SETUP
This chapter explains how to install and configure the software that is required for the printer and scanner functions
of the machine.
This manual refers to the CD-ROM that accompanied the machine simply as "CD-ROM".
Note
SOFTWARE
The CD-ROM that accompanies the machine contains the following software:
MFP driver
Printer driver
The printer driver enables you to use the printer function of the machine.
The printer driver includes the Print Status Window. This is a utility that monitors the machine and informs you of the
printing status, the name of the document currently being printed, and error messages.
Scanner driver
The scanner driver allows you to use the scanning function of the machine with TWAIN-compliant and
WIA-compliant applications.
Button Manager
Button Manager allows you to use the scanner menus on the machine to scan a document.
Sharpdesk
Sharpdesk is an integrated software environment that makes it easy to manage document and image files and
launch applications.
PC-Fax driver
This enables you to send a fax from your computer to a fax machine via the machine (when the fax option is
installed).
HARDWARE AND SOFTWARE REQUIREMENTS
Check the following hardware and software requirements before installing the software.
*1
*2
Computer type
IBM PC/AT or compatible computer equipped with a USB 2.0 /1.1
Windows 2000 Professional, Windows XP Professional, Windows XP Home Edition, Windows
Vista, Windows 7
*3
Operating system
Other hardware requirements An environment on which any of the operating systems listed above can fully operate
1
* The machine's USB 2.0 port will transfer data at the speed specified by the USB 2.0 (Hi-Speed) only if the Microsoft USB 2.0
driver is preinstalled in the computer, or if the USB 2.0 driver for Windows 2000 Professional/XP/Vista/7 that Microsoft provides
through its "Windows Update" is installed.
2
* Compatible with Windows 2000 Professional, Windows XP Professional, Windows XP Home Edition, Windows Vista, or
Windows 7 preinstalled models equipped with a USB interface as standard.
3
* • The machine does not support printing from a Macintosh environment.
• Administrator’s rights are required to install the software using the installer.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
POWER ON THE MACHINE
The power switch is located on the left side of the machine.
Turn the power switch to the "ON" position.
INSTALLING THE SOFTWARE
• The screen images in this manual are mainly for Windows Vista. With other versions of Windows, some screen
images may be different from those in this manual.
Note
• If an error message appears, follow the instructions on the screen to solve the problem. After the problem is
solved, the installation procedure will continue. Depending on the problem, you may have to click the "Cancel"
button to exit the installer. In this case, reinstall the software from the beginning after solving the problem.
The USB cable must not be connected
to the machine. Make sure that the
cable is not connected before
proceeding.
If the cable is connected, a Plug and Play window
will appear. If this happens, click the "Cancel"
button to close the window and disconnect the
cable.
The "SOFTWARE LICENSE" window
will appear. Make sure that you
understand the contents of the
software license, and then click the
"Yes" button.
1
5
You can show the "SOFTWARE LICENSE" in
Note
a different language by selecting the desired
language from the language menu. To install
the software in the selected language,
continue the installation with that language
selected.
The cable will be connected in step 12.
Note
Insert the CD-ROM into your CD-ROM
drive.
2
3
Read the message in the "Welcome"
window and then click the "Next"
button.
6
7
Click the "Start" button, click
"Computer", and then double-click the
CD-ROM icon ( ).
• In Windows XP, click the "start" button, click
"My Computer", and then double-click the
CD-ROM icon.
To install the software using the most
general options, click the "Standard"
button of the "Connected to this
computer" menu and go to step 11.
To install particular packages, click the
"Custom" button and go to the next step.
• In Windows 2000, double-click "My Computer",
and then double-click the CD-ROM icon.
Double-click the "Setup" icon (
).
4
• In Windows 7, if a message screen appears
asking you for confirmation, click "Yes".
• In Windows Vista, if a message screen appears
asking you for confirmation, click "Allow".
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
Click the "MFP Driver" button.
You will return to the window of step
8
10
8. If you wish to install Utility
Software, click the "Utility Software"
button.
If you do not wish to install the Utility Software, go
to step 11.
1
Click the "Display Readme" button to show
information on packages that are selected.
Select "Connected to this computer"
and click the "Next" button.
9
Follow the on-screen instructions.
After the installation, a message prompting
Note
you to restart your computer may appear. In
this case, click the "Yes" button to restart your
computer.
When installing is finished, click the
"Close" button.
11
• If you are using Windows Vista/7 and a
security warning window appears, be sure
to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a
warning message appears regarding the
Windows logo test or digital signature, be
sure to click "Continue Anyway" or "Yes".
Caution
Follow the on-screen instructions.
A message will appear instructing you to connect
the machine to your computer. Click the "OK"
button.
When "The installation of the SHARP software is
complete." appears, click the "OK" button.
• If you are using Windows Vista/7 and a
After the installation, a message prompting
Caution
security warning window appears, be sure
to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a
warning message appears regarding the
Windows logo test or digital signature, be
sure to click "Continue Anyway" or "Yes".
Note
you to restart your computer may appear. In
this case, click the "Yes" button to restart your
computer.
Make sure that the power of the
machine is turned on, and then
12
Windows will detect the machine and a Plug and
Play window will appear.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
Follow the instructions in the Plug
and Play window to install the driver.
13
Follow the on-screen instructions.
• If you are using Windows Vista/7 and a
security warning window appears, be sure
to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a
warning message appears regarding the
Windows logo test or digital signature, be
sure to click "Continue Anyway" or "Yes".
Caution
This completes the installation of the software.
• If you installed Button Manager, set up Button
Manager as explained in "SETTING UP BUTTON
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING TO A COMPUTER
Follow the procedure below to connect the machine to your computer.
A USB cable for connecting the machine to your computer is not included with the machine. Please purchase the
appropriate cable for your computer.
Interface cable
USB cable
Shielded twisted pair cable, high-speed transmission equivalent (3 m (10 feet) max.)
If the machine will be connected using a USB 2.0 interface, please purchase a USB cable that supports USB 2.0.
• USB is available with a PC/AT compatible computer that was originally equipped with USB and had Windows
2000 Professional, Windows XP Professional, Windows XP Home Edition, Windows Vista, or Windows 7
Caution
preinstalled.
1
• Do not connect the USB cable before installing the MFP driver. The USB cable should be connected during
installation of the MFP driver.
CONNECTING A USB CABLE
Insert the cable into the USB connector on
the machine.
Insert the other end of the cable into
your computer's USB connector.
1
2
System requirements for USB 2.0 (Hi-Speed mode)
• The machine's USB 2.0 connector will transfer data at the speed specified by the USB 2.0 (Hi-Speed) only if the
Microsoft USB 2.0 driver is preinstalled in the computer, or if the USB 2.0 driver for Windows 2000 Professional
/XP/Vista/7 that Microsoft provides through its "Windows Update" Web page is installed.
• Even when the Microsoft USB 2.0 driver is used, it may not be possible to obtain full USB 2.0 speed if a PC card
supporting USB 2.0 is used. To obtain the latest driver (which may enable a higher speed), contact the
manufacturer of your PC card.
• Connection is also possible using a USB 1.1 port on your computer. However, the specifications will be USB 1.1
specifications (Full-Speed).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
USING THE MACHINE AS A SHARED PRINTER
If the machine will be used as a shared printer on a Windows network, follow these steps to install the printer driver
in the client computer.
To configure the appropriate settings in the print server, see the operation manual or help file of your operating
system.
Note
Perform steps 2 through 6 in
Select the printer name (configured as
a shared printer on a print server)
from the list.
1
2
3
5
6
Click the "Custom" button.
In Windows 2000/XP, you can also click the "Add
Network Port" button displayed below the list and
select the printer to be shared by browsing the
network in the window that appears.
Click the "MFP Driver" button.
Click the "Next" button.
Follow the on-screen instructions.
If the shared printer does not appear in the
list, check the settings on the print server.
Note
• If you are using Windows Vista/7 and a
security warning window appears, be sure
to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a
warning message appears regarding the
Windows logo test or digital signature, be
sure to click "Continue Anyway" or "Yes".
Caution
Click the "Display Readme" button to show
information on packages that are selected.
You will return to the window of step 3.
Click the "Close" button.
7
Select "Connected via the network"
and click the "Next" button.
4
After the installation, a message prompting
you to restart your computer may appear. In
this case, click the "Yes" button to restart your
computer.
Note
This completes the installation of the software.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONFIGURING THE PRINTER
DRIVER
After installing the printer driver, you must configure the printer driver settings appropriately for the number of paper
trays on the machine and the size of paper loaded in each.
Click the "Start" button, click "Control
Panel", and then click "Printer".
• In Windows 7, click the "Start" button and then
click "Devices and Printers".
• In Windows XP, click the "start" button and click
"Printers and Faxes".
Click the "Set Tray Status" button and
select the size of paper that is loaded
in each tray.
Select a tray in the "Paper Source" menu, and
select the size of paper loaded in that tray from
the "Set Paper Size" menu. Repeat for each tray.
1
4
1
• In Windows 2000, click the "Start" button, select
"Settings", and then click "Printers".
In Windows XP, if "Printers and Faxes" does
Note
not appear in the "start" menu, select "Control
Panel", select "Printers and Other Hardware",
and then select "Printers and Faxes".
Click the "SHARP MX-XXXX" printer
driver icon and select "Properties"
from the "Organize" menu.
• In Windows 7, right-click the "SHARP
MX-XXXX" printer driver icon, and then click
"Printer properties".
2
3
• In Windows XP/2000, select "Properties" from
the "File" menu.
Click the "OK" button in the "Set Tray
Status" window.
5
6
Click the "Configuration" tab and set
the printer configuration based on the
options that have been installed.
Click the "OK" button in the printer
properties window.
Set the printer configuration properly. If not,
printing may not take place correctly.
To automatically configure the settings based
on the detected machine status, click the
"Auto Configuration" button.
Note
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING UP BUTTON MANAGER
Button Manager is a software program that works with the scanner driver to enable scanning from the machine.
To scan using the machine, Button Manager must be linked with the scan menu on the machine. Follow the steps
below to link Button Manager.
Windows XP/Vista/7
Click the "Start" button, click "Control
Panel", click "Hardware and Sound",
and then click "Scanners and
Cameras".
Select "Start this program" and then
select "Sharp Button Manager AA"
from the pull-down menu.
1
5
• In Windows 7, click the "Start" button and then
click "Devices and Printers".
• In Windows XP, click the "start" button, select
"Control Panel" and click "Printers and Other
Hardware", and then click "Scanners and
Cameras".
Click the "SHARP MX-XXXX" icon and
select "Properties".
2
• In Windows 7, right-click the "SHARP
MX-XXXX" icon and select "Scan properties".
• In Windows XP, select "Properties" from the
"File" menu.
In the "Properties" screen, click the
"Events" tab.
3
4
Select "SC1:" from the "Select an
event" pull-down menu.
Repeat Steps 4 and 5 to link Button
Manager to "SC2:" through "SC6:".
Select "SC2:" from the "Select an event"
pull-down menu. Select "Start this program",
select "Sharp Button Manager AA" from the
pull-down menu. Do the same for each scan
menu through "SC6:".
6
7
Click the "OK" button.
Button Manager is now linked to the scan menu
(1 through 6).
The scan settings for each of scan menu 1
through 6 can be changed with the setting
window of Button Manager.
For the factory default settings of the scan menu
and the procedures for configuring Button
Manager settings, see "BUTTON MANAGER
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
Windows 2000
Click the "Start" button, select
"Settings", and then click "Control
Panel".
Select "Sharp Button Manager AA" in
"Send to this application".
1
6
Double-click the "Scanners and
Cameras" icon.
2
SC1:
Select "SHARP MX-XXXX" and click
the "Properties" button.
1
3
AA
In the "Properties" screen, click the
"Events" tab.
4
Select "SC1:" from the "Scanner
events" pull-down menu.
5
If other applications are shown, deselect the
Note
checkboxes for the other applications and
leave only the Button Manager checkbox
selected.
Click the "Apply" button.
SC1:
7
8
AA
Repeat Steps 5 through 7 to link
Button Manager to "SC2:" through
"SC6:".
Select "SC2:" from the "Scanner events"
pull-down menu. Select "Sharp Button Manager
AA" in "Send to this application" and click the
"Apply" button. Do the same for each scan menu
through "SC6:".
When the settings have been completed, click the
"OK" button to close the screen.
Button Manager is now linked to the scan menu
(1 through 6).
The scan settings for each of scan menu 1
through 6 can be changed with the setting
window of Button Manager.
For the factory default settings of the scan menu
and the procedures for configuring Button
Manager settings, see "BUTTON MANAGER
14
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
If the software is not installed correctly, check the following items on your computer.
The driver cannot be installed
(Windows 2000/XP)
If the driver cannot be installed in Windows 2000/XP,
follow these steps to check your computer's settings.
Plug and Play window does not appear
If the Plug and Play window does not appear after you
connect the machine to your computer with a USB
cable and turn on the machine, follow the steps below
to verify that the USB port is available.
Click the "start" button and then click
"Control Panel".
In Windows 2000, click the "Start" button, select
"Settings", and then click "Control Panel".
1
Click the "Start" button, select
"Control Panel", and then click
"System and Maintenance".
1
• In Windows XP, click the "start" button, click
"Control Panel", and then click "Performance
and Maintenance".
• In Windows 2000, click the "Start" button, select
"Settings", and then click "Control Panel".
Click "Performance and Maintenance",
and then click "System".
In Windows 2000, double-click the "System" icon.
2
Click the "Hardware" tab and then
click the "Driver Signing" button.
3
Click "Device Manager", and if a
message screen appears asking you
for confirmation, click "Continue".
"Universal Serial Bus controllers" will appear in
the list of devices.
• In Windows XP, click "System", click the
"Hardware" tab, and click the "Device Manager"
button.
2
Check "What action do you want
Windows to take?" ("File signature
verification" in Windows 2000).
4
• In Windows 2000, double-click the "System"
icon, click the "Hardware" tab, and click the
"Device Manager" button.
Click the
Serial Bus controllers".
icon beside "Universal
3
4
Two items should appear: your controller chipset
type and Root Hub. If these items appear, you
can use the USB port. If the "Universal Serial Bus
controllers" shows a yellow exclamation point or
does not appear, you must check your computer
manual for USB troubleshooting or contact your
computer manufacturer.
If the option "Block" has been selected, it will not
be possible to install the driver. Select the option
"Warn" and then install the driver as explained in
Once you have verified that the USB
port is enabled, install the software as
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
The driver cannot be correctly
installed by Plug and Play
Removing the software
If you need to remove the software, follow these steps.
If the driver cannot be correctly installed by Plug and
Play (for example, Plug and Play takes place without
copying the required files for the driver installation),
follow these steps to remove unneeded devices and
then install the driver as explained in "INSTALLING
Click the "Start" button, and then click
"Control Panel".
• In Windows XP, click the "start" button and then
click "Control Panel".
• In Windows 2000, click the "Start" button, select
"Settings", and then click "Control Panel".
1
Click the "Start" button, select
1
"Control Panel", and then click
"System and Maintenance".
Click "Uninstall a program".
2
1
• In Windows XP, click the "start" button, click
"Control Panel", and then click "Performance
and Maintenance".
• In Windows 2000, click the "Start" button, select
"Settings", and then click "Control Panel".
• In Windows XP, click "Add or Remove
Programs".
• In Windows 2000, double-click the
"Add/Remove Programs" icon.
Select the driver from the list, and
remove the software.
For more information, refer to your operating
manual or to the help files for your operating
system.
3
Click "Device Manager", and if a
message screen appears asking you
for confirmation, click "Continue".
• In Windows XP, click "System", click the
"Hardware" tab, and click the "Device Manager"
button.
2
• In Windows 2000, double-click the "System"
icon, click the "Hardware" tab, and click the
"Device Manager" button.
Restart your computer.
4
5
Click the
devices".
icon beside "Other
3
4
If "SHARP MX-XXXX" appears, select and delete
the item.
If "Other devices" does not appear, close the
"Device Manager" window.
Note
Install the software as explained in
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
BEFORE USING THE MACHINE
2
This chapter contains basic information that should be read before using the machine.
PART NAMES AND FUNCTIONS
3
13
8
9
7
4
5
5
14
15
1
6
10
2
12
11
16
17
18
1
8
USB 2.0 port
Connect to your computer to this port to use the
printer and scanner functions.
Top tray (when the job separator tray kit is
installed)
Received faxes (when the fax option is installed) and
print jobs are delivered to this tray.
2
3
4
Charger cleaner
Use to clean the transfer charger.
Glass cleaner
Use to clean the original scanning glass.
Document glass
Place an original that you wish to scan face down
here. (p.29)
9
Operation panel
Contains operation keys and indicator lights.
Front cover
Open to remove paper misfeeds or replace the toner
cartridge.
10
11
12
Tray 1
Tray 1 can hold approximately 250 sheets of copy
5
6
7
Handles
Use to move the machine.
Power switch
Press to turn the machine power on and off.
Centre tray
paper (80 g/m2 (20 lbs.)).
Tray 2
Tray 2 can hold approximately 250 sheets of copy
paper (80 g/m2 (20 lbs.)).
Copies and printed pages are output to this tray.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING THE MACHINE
21 22
23
27
24
19
2
28
29
26
25
20
13
14
15
16
24
Document cover (when installed)
Open to make a copy from the document glass.
Side cover
Open to remove misfed paper.
Side cover handle
Pull to open the side cover.
Bypass tray guides
Right side cover (when the SPF/RSPF is
installed)
Open to remove misfed originals.
25
Fusing unit release levers
To remove the paper misfed in the fusing unit, push
down on these levers and remove the paper.
The fusing unit is hot. Do not touch
Warning
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
Adjust to the width of the paper when using the
bypass tray.
17
18
19
Bypass tray
Special paper (heavy paper or transparency film)
can be fed from the bypass tray.
26
27
Roller rotating knob
Rotate to remove misfed paper.
Exit area (when the SPF/RSPF is installed)
Originals exit the machine here after
copying/scanning when the SPF/RSPF is used.
Bypass tray extension
Pull out when feeding large paper such as A3 and
B4 (11" x 17" and 8-1/2" x 14").
Toner cartridge lock release lever
To replace the toner cartridge, pull out the toner
cartridge while pushing on this lever.
28
Photoconductive drum
Images are formed on the photoconductive drum.
20
21
Toner cartridge
Contains toner.
Document feeder tray (when the SPF/RSPF is
installed)
Do not touch the photoconductive drum
Caution
(green portion) when removing the misfed
paper. Doing so may damage the drum and
cause smudges on copies.
Place the original(s) that you wish to scan face up
here. Up to 40 sheets can be placed.
29
Fusing unit paper guide
Open to remove misfed paper.
22
23
Original guides (when the SPF/RSPF is
installed)
Adjust to the size of the originals.
The model name is on the front cover of the
machine.
Note
Feeding roller cover (when the SPF/RSPF is
installed)
Open to remove misfed originals.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING THE MACHINE
OPERATION PANEL
1
2
3
4
5
SPEAKER
SHIFT
01
06
11
16
21
02
07
12
17
22
03
08
13
18
23
04
09
14
19
24
05
10
15
20
25
COPY
PRINT
FAX STATUS
ON LINE
DATA
REDIAL/PAUSE
SPECIAL
FUNCTION
SCAN
FAX
SPEED
LINE
DATA
COPY EXPOSURE
SCAN COLOUR MODE
FAX PROGRAM
SYMBOL
COMM. SETTING
SPACE/–
13
14
15
1
2
3
5
Keys for fax function (when the fax option is
installed)
These are used in fax mode. For more information,
see the "Operation Guide (FACSIMILE
EXPANSION KIT)" that accompanies the machine.
[COPY] key / indicator
Press to select copy mode. If pressed when
"Ready to copy." appears or during warm-up, the
the key is pressed.
[FAX STATUS] key (when the fax option is
installed)
This key is used in fax mode. For more information,
see the "Operation Guide (FACSIMILE
EXPANSION KIT)" that accompanies the machine.
Display
Shows various messages. (p.21)
[BACK] key
Press to return the display to the previous screen.
Copy number display
The selected number of copies appears. During
copying, this shows the remaining number of
copies.
6
7
8
[PRINT] key / indicator
Press to select print mode.
• ONLINE indicator
Print jobs can be received when this indicator is lit.
9
[OK] key
Press to enter the selected setting.
Numeric keys
Use to select the number of copies.
[C] key
• DATA indicator
This lights steadily when there is a print job in
memory that has not been printed, and blinks
during printing.
10
11
4
[SCAN] key / indicator
Press to select scan mode. To use the machine as
a network scanner, see the "Operation Guide
(NETWORK EXPANSION KIT)" that accompanies
the machine.
Press to clear the set number of copies or stop a
copy run.
[INTERRUPT] key ( ) / INTERRUPT indicator
Interrupts a copy run to allow an interrupt copy job
to be performed. (p.48)
12
19
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING THE MACHINE
6
7
8
9
10
11
12
ABC
JKL
DEF
INTERRUPT
GHI
MNO
BACK
OK
PQRS
TUV
WXYZ
_
@.-
PAPER SELECT COPY RATIO AUTO IMAGE
OUTPUT 2-SIDED COPY
RESOLUTION ADDRESS FORMAT ORIGINAL SIZE DUPLEX SCAN
2
ADDRESS
DUPLEX SCAN
BROADCAST ORIGINAL SIZE
RESOLUTION
READ-END
ACC. #-C
16
17
18
19
20
21
22
23
24 25
26
13
21
22
23
24
[FAX] key / indicator (when the fax option is
installed)
Arrow keys
Press to move the highlighting (which indicates
that an item is selected) in the display.
[ACC.#-C] key (
Press the end the use of an account and return the
LINE indicator, DATA indicator
This key is used in fax mode. For more information,
see the "Operation Guide (FACSIMILE
EXPANSION KIT)" that accompanies the machine.
[SPECIAL FUNCTION] key
Press to select special functions.
[EXPOSURE] key
Use to select the exposure mode. "AUTO",
"TEXT", or "PHOTO" can be selected. (p.33)
[PAPER SELECT] key
[COPY RATIO] key
Press to select a reduction or enlargement copy
ratio. (p.38)
)
14
15
[0] key
Press during a continuous copy run to display the
number of copies completed.
[READ-END] key (
When copying in sort mode from the document
glass, press this key when you have finished
scanning the original pages and are ready to start
copying. (p.49)
)
16
17
25
26
[CA] key
Clears all selected settings and returns the
machine to the default settings. (p.22)
[START] key ( ) / indicator
Copying is possible when this indicator is on. Press
the key to start copying. This indicator blinks when
auto power shut-off mode has activated. Press the
key to return to normal operation.
18
[AUTO IMAGE] key
Press to have the copy ratio selected
19
20
[OUTPUT] key
Use to select the sort function. (p.49)
[2-SIDED COPY] key
(MX-M182D/MX-M202D/MX-M232D)
Select the two-sided copying mode. (p.41)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING THE MACHINE
Display (base screen)
Example: Copy mode
Icons appearing in the special function icon display
1-sided to 2-sided
Edge + Centre
copy (MX-M182D/
erase
1
2
3
4
MX-M202D/MX-M
Ready to copy.
232D only)
A4
AUTO
2-sided to 2-sided
2 in 1 copy
copy (MX-M182D/
100%
MX-M202D/MX-M
232D only)
AUTO
A4
5
6
7
2-sided to 1-sided
4 in 1 copy
copy
Sort function
Dual page copy
Card shot
Margin shift copy
Edge erase copy
Centre erase copy
ID card copy
1
2
3
5
6
Exposure display
Indicates the selected exposure mode.
Special function icon display
Icons of enabled special functions will appear.
Copy ratio display
Displays the copy ratio for reduction or
enlargement.
Paper size display
Displays the selected paper size. When "AUTO"
appears, the most suitable size of paper is
automatically selected.
Paper tray display
The selected paper tray is highlighted.
Message display
Messages are displayed regarding machine status
and operation.
Original size display
The size of the placed original and the icon of the
original scanning mode will appear.
7
4
: One-sided scanning in the SPF.
: Scanning on the document glass
: Two-sided scanning in the RSPF.
OPERATION IN COPY, PRINT, SCAN, AND FAX MODES
Some operations in the various modes of the machine cannot take place simultaneously.
Interrupting operation
Faxing
Scanning
originals
Printing
faxes
Copy output
Printing
No
Scanning
No
Interrupted operation
1
Copying
Printing
Output
Output
Yes*
No
No
2
Yes*
No
No
No
No
No
No
Scanning Scanning an original No
No
No
No
Scanning an original No
No
Faxing
2
2
2
Output
Yes*
Yes*
Yes*
*1 Can be used after pressing the [INTERRUPT] key ( ).
*2 After the page that is currently being printed is output, the job is interrupted.
• Printing is not possible when the front or side cover is opened for machine maintenance, or when a misfeed
occurs or the machine runs out of paper or toner, or when the drum cartridge reaches its replacement time.
• If an original misfeed occurs in the SPF/RSPF, printing will not be possible until the misfed original is removed
and the SPF/RSPF is ready for use.
Note
21
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER ON AND OFF
The power switch is located on the left side of the machine.
POWER ON
POWER OFF
Make sure that the machine is not in
operation and then turn the power switch
to the "OFF" position.
Turn the power switch to the "ON"
position.
It will take about 25 seconds
If the power switch is turned
off while the machine is in
operation, a misfeed may
occur and the job that was in
progress will be cancelled.
for the machine to warm up.
While the machine is
warming up, the START
indicator will blink. (The
START indicator will light up
when the machine is ready
to copy.)
However, you can make desired settings and press
the [START] key ( ) during warm-up. Copying will
start after warm-up.
2
• The machine reverts to the initial settings when it is first turned on, when the [CA] key is pressed, or when no
keys are pressed for the preset "Auto clear" time following the end of a copy job. When the machine reverts to
the initial settings, all settings and functions selected to that point are cancelled. The "Auto clear" time can be
changed in the system settings. (p.118)
Note
• The machine is initially set to automatically enter power save mode if not used for copying or printing, for a
preset period of time. This setting can be changed in the system settings. (p.120)
Power save modes
The machine has two power save modes to reduce overall power consumption thereby reducing the cost of
operation. In addition, these modes conserve natural resources and help reduce environmental pollution. The two
power save modes are "Preheat mode" and "Auto power shut-off mode".
Preheat mode
This function automatically switches the machine to a low power consumption state if the duration of time set in the
system settings elapses without the machine being used when the power is on. In preheat mode the display turns
off. Normal operation automatically resumes when a key on the operation panel is pressed, an original is placed, or
a print job or fax is received.
Auto power shut-off mode
This function automatically switches the machine to a state that consumes even less power than preheat mode if the
duration of time set in the system settings elapses without the machine being used when the power is on. During
auto power shut-off, only the START indicator blinks. To restore the machine to normal operation, press the
[START] key. Normal operation also resumes automatically when a print job or fax is received or scanning is begun
from a computer. While auto power shut-off is in effect, pressing a key other than the [START] key will have no
effect.
The preheat activation time and the "Auto power shut-off timer" can be changed using system settings. It is
suggested that you set times that are appropriate for your usage of the machine. (p.120)
Note
Default settings
The machine is set at the factory to return all settings to the default settings one minute after a copy job is finished
(auto clear function) or when the [CA] key is pressed. When the settings return to the default settings, any functions
that were selected are cancelled.
The auto clear time can be changed in the system settings. (p.118)
In the default state the display shown below appears. The default state of the display may vary depending on
settings in the system settings.
Ready to copy.
AUTO
100%
*The screen is that of the MX-M232D.
AUTO
A4
22
Download from Www.Somanuals.com. All Manuals Search And Download.
LOADING PAPER
The message "TRAY< >:Add paper." will be displayed when there is no copy paper in the selected paper tray.
(< > is the tray number.) Load paper in the indicated paper tray.
PAPER
For best results, use only SHARP recommended paper.
Paper tray type
Paper type
Size
Weight
Capacity
250 sheets
(Load paper lower
than the line on the
tray)
*1
2
2 *2
Paper tray
250-sheet paper
feed unit
2 x 250-sheet
paper
feed unit
Standard paper
Recycled paper
A5
B5
A4
B4
A3
56 g/m to 90 g/m
*2
(15 lbs. to 24 lbs.
)
*1
(5-1/2" x 8-1/2" (Invoice))
(8-1/2" x 11" (Letter))
(8-1/2" x 13" (Foolscap))
(8-1/2" x 14" (Legal))
(11" x 17" (Ledger))
2
2
*3
Bypass tray
Standard paper
Recycled paper
A6R to A3
(5-1/2" x 8-1/2" (Invoice)
to 11" x 17" (Ledger))
56 g/m to 90 g/m
100 sheets
(15 lbs. to 24 lbs.)
Transparency film
Labels
Load one sheet of
paper each time on
the bypass tray.
2
2
*4
Thick paper
A6R to A4
(5-1/2" x 8-1/2" (Invoice)
to 8-1/2" x 11" (Letter))
129 g/m to 200 g/m Load one sheet of
(33 lbs. to 110 lbs. ) paper each time on
the bypass tray.
2
2
106 g/m to 128 g/m You can load multiple
(28 lbs. to 33 lbs.)
sheets of paper on
the bypass tray.
2
2
A6R to A3
(5-1/2" x 8-1/2" (Invoice)
to 11" x 17" (Ledger))
91 g/m to 105 g/m
You can load multiple
sheets of paper on
the bypass tray.
(24 lbs. to 28 lbs.)
Envelopes
International DL
(110 mm x 220 mm)
International C5
(162 mm x 229 mm)
Monarch
5 sheets
(3-7/8" x 7-1/2")
Commercial 10
(4-1/8" x 9-1/2")
1
* A5 (5-1/2" x 8-1/2") can be used in the upper paper tray but cannot be used in other trays (including trays in optional paper
feeding unit).
2
2
* When making a large number of copies or prints using 90 g/m (24 lbs.) paper, remove the output from the paper output tray
when about 100 pages have been printed. The output may not stack correctly if more than 100 pages are allowed to
accumulate.
3
* The number of sheets of the paper which can be set changes with the weight of a paper.
4
* Index
Paper that can be used for automatic 2-sided printing
(MX-M182D/MX-M202D/MX-M232D)
Paper used for automatic two-sided printing must meet the following conditions:
Paper type: Plain paper (special paper cannot be used.)
Paper size: Standard sizes (A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R)
2
2
Paper weight: 56 g/m to 90 g/m (15 lbs. to 24 lbs.)
Special papers
Follow these guidelines when using special papers.
●
Use SHARP recommended transparency film and label sheets. Using other than SHARP recommended
paper may result in misfeeds or smudges on the output. If other than SHARP recommended media must be
used, feed each sheet one at a time using the bypass tray (do not attempt continuous copying or printing).
● There are many varieties of special paper available on the market, and some cannot be used with this
machine. Before using special paper, contact your authorised service representative.
● Before using other than SHARP recommended paper, make a test copy to see if the paper is suitable.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING THE MACHINE
LOADING PAPER
Make sure that the machine is not copying or printing, and then follow these steps to load paper.
Loading the paper tray
Gently lift and pull out the paper tray
until it stops.
Load paper into the tray.
1
4
• Open the package of
the paper and load it
without fanning the
paper.
• Make sure the stack of
paper is straight before
loading it.
Adjust the plates in the tray to the
length and width of the paper.
2
2
• The plate A is a slide-type
guide. Grasp the locking knob
on the guide and slide the
guide to the indicator line of
the paper to be loaded.
• The plate B is an insert-type
guide. Remove it and then
insert it at the indicator line of
the paper to be loaded.
Plate B
Plate A
• Do not load paper higher than the line on
the tray (up to 250 sheets).
Note
• Do not add paper to the loaded paper. It
may cause multiple feed of paper.
• A5 (5-1/2" x 8-1/2") can be used in the
upper paper tray but cannot be used in
other trays (including trays in optional paper
feeding unit).
• When using 11" x 17" sized
paper store the plate B in the
slot at the left front of the
paper tray.
Gently push the paper tray into the
machine.
5
Push the pressure plate down.
3
Push the centre of the pressure
plate down until it locks into
place.
• If you loaded a different size of paper than
Note
was loaded previously in the tray, go to
• When misfeed occurs, rotate the paper 180
degrees and reload it.
• Straighten curled paper before using it.
For how to load paper, refer to the steps below.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING THE MACHINE
Loading the bypass tray
Unfold the bypass tray.
Insert the paper (print face down) all
the way into the bypass tray.
1
3
To prevent a misfeed,
verify once more that the
paper guides are
adjusted to the width of
the paper.
When feeding large
paper such as B4 and A3
(8-1/2" x 14" and
11" x 17"), pull out the
bypass tray extension.
• If you loaded paper in the bypass tray,
press the [PAPER SELECT] key to select
the bypass tray.
• If you load thick paper in the bypass tray,
press the [PAPER] key until "EXTRA" is
highlighted. The paper type is set to thick
paper. The setting is cleared when "Auto
clear" works or the [CA] key is pressed.
For restrictions on paper types and
Note
Set the paper guides to the copy
2
paper width.
Important points when inserting paper in the bypass tray
• Up to 100 sheets of standard copy paper can be set in the bypass tray.
• Be sure to place A6, B6 or 5-1/2" x 8-1/2" size paper or envelopes horizontally as shown in the following diagram.
(When using the printer: Same as the direction for the A4 size paper, etc)
Not
available
Available
• When loading envelopes, make sure that they are straight and flat and do not have loosely glued construction flaps
(not the closure flap).
• Special papers except SHARP recommended transparency film, labels, and envelopes must be fed one sheet at a
time through the bypass tray.
• When adding paper, first remove any paper remaining in the tray, combine it with the paper to be added and then
reload as a single stack. The paper to be added must be the same size and type as the paper already in the tray.
• Do not use paper that is smaller than the original. This may cause smudges or unclean images.
• Do not use paper that has already been printed on by a laser printer or plain paper fax machine. This may cause
smudges or unclean images.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING THE MACHINE
Envelopes
Do not use the following envelopes, as misfeeds will occur.
• Envelopes with metal tabs, clasps, strings, holes, or windows.
• Envelopes with rough fibres, carbon paper, or glossy surfaces.
• Envelopes with two or more flaps.
• Envelopes with tape, film, or paper attached to the flap.
• Envelopes with a fold in the flap.
• Envelopes with glue on the flap to be moistened for sealing.
• Envelopes with labels or stamps.
• Envelopes that are slightly inflated with air.
• Envelopes with glue protruding from the seal area.
• Envelopes with part of the seal area peeled off.
CHANGING THE PAPER SIZE SETTING OF A TRAY
If the size of the loaded paper is different from the size shown in the display, follow the steps below to change the paper size setting of the tray.
The paper size setting cannot be changed during copying, printing, fax printing (when the fax option is installed), or interrupt copying, or when a
misfeed has occurred. However, if the machine is out of paper or out of toner, the paper size setting can be changed during copying, printing, and
fax printing.
See "PAPER" (p.23) for information on the specifications for the types and sizes of paper that can be loaded in the paper trays.
The paper size cannot be set for the bypass tray.
2
Press the [SPECIAL FUNCTION] key.
Press the [ ] or [ ] key to select the
paper tray for which the paper size is
being changed.
1
4
ON LINE
DATA
SPECIAL FUNCTION
ID CARD COPY
SPECIAL
FUNCTION
Example: Tray 2
PAPER SIZE SET
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
LINE
DATA
A4
A3
A3
COPY EXPOSURE PAPER SE
SCAN OUR MODE RESOLUT
B4
The special function
screen will appear.
A4
A4R
The screen shown above is the copy mode screen.
Press the [ ] key.
Press the [ ] or [ ] key to select
"PAPER SIZE SET".
5
2
PQ
PAPER SIZE SET
SPECIAL FUNCTION
A4
A3
A3
ID CARD COPY
ED COPY
LEX SCAN
LEX SCAN
B4
SPECIAL MODES
A4
ORIG. SIZE ENTER
ACC
A4R
PAPER SIZE SET
The cursor moves to the
paper size selection
position on the right.
Press the [OK] key.
3
Press the [ ] or [ ] key to select the
paper size.
6
GHI
BACK
OK
PAPER SIZE SET
A4
A3
A3
Example: Selecting B4 size
PQRS
B4
PAPER SIZE SET
A4
PY
A4
A3
A3
A4R
The paper size setting
screen will appear.
B4
A4
A4R
: Shows tray "1".
: Shows tray "2".
For the paper trays and tray numbers, see
Note
To change the size of another paper tray, press the
[
] key and then repeat steps 4 to 6.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE USING THE MACHINE
Press the [OK] key.
Press the [OK] key.
7
8
A message asking you to
The selected paper size will be
OK
OK
confirm the new paper size
setting will appear.
stored and the display will
return to the base screen.
Affix the paper size label for the paper size
selected in step 6 to the label position on the
right end of the tray.
Note
DISABLING (ENABLING) AUTO TRAY SWITCHING
When auto tray switching is enabled and paper runs out during copying or printing, the job will continue using paper
from a different tray if that tray has the same size of paper in the same orientation. (This function does not operate
when using the bypass tray or when a fax is being printed.) This function has been enabled at the factory. If you
prefer to disable the function, follow the steps below.
Press the [SPECIAL FUNCTION] key.
Press the [ ] key repeatedly until
"AUTO TRAY SWITCHING" appears.
1
4
ON LINE
DATA
PAPER SIZE SET
SPECIAL FUNCTION
ID CARD COPY
SPECIAL
FUNCTION
AUTO TRAY
SWITCHING
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
LINE
DATA
COPY EXPOSURE PAPER SE
SCAN UR MODE RESOLUT
The special function
screen will appear.
Move the cursor to the lowest tray and then press the
[
] key again. The above screen will appear.
The above screen appears in copy mode.
Press the [OK] key.
5
Select "PAPER SIZE SET" with the [ ]
or [ ] key.
2
OK
PAPER SIZE SET
AUTO TRAY
PQ
SPECIAL FUNCTION
ID CARD COPY
SWITCHING
ED COPY
LEX SCAN
LEX SCAN
SPECIAL MODES
ORIG. SIZE ENTER
ACC
PAPER SIZE SET
When a checkmark does not appear in the checkbox,
the auto tray switching function will not operate.
Press the [OK] key.
3
Press the [ ] key.
6
GHI
BACK
OK
PAPER SIZE SET
A4
A3
A3
PQRS
PAPER SIZE SET
B4
A4
A3
A3
A4
PY
B4
A4R
The paper size setting
screen will appear.
A4
A4R
You will return to the
paper size setting screen.
To re-enable auto tray switching, press the [OK] key in
the screen of step 5 so that a checkmark appears.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDITING MODE
When auditing mode is enabled, a count is kept of the pages printed by each account. The page counts can be viewed in the
display.
This function is enabled in the system settings. (For the counts in copy, print, and scan modes, see p.114. For the counts in fax
mode, see the "Operation Guide (FACSIMILE EXPANSION KIT)" that accompanies the machine.)
NUMBER OF ACCOUNTS IN AUDITING MODE
Mode
Number of accounts
Remarks
Same for copy, print,
and scan modes
Copying, printing, and scanning counts are managed
under one account number.
(1)
50 maximum
(2) Fax
50 maximum
Fax counts are managed under one account number.
The same account number can be assigned to (1) and (2).
Note
2
USING AUDITING MODE
When auditing mode is turned on, the account number entry screen is displayed. Enter your account number
(five-digit identification number) as explained below before performing a copy, fax, or scan operation.
Enter your account
number.
ACCOUNT #:-----
• If you enter a account number for copy
Enter your account number (five
1
Note
mode that has also been programmed for
fax mode, you can change to fax mode
after completing the copy operation and
continue with the fax operation without
re-entering your account number.
If you enter an account number for copy
mode that has not been programmed for
fax mode, enter your account number for
fax mode after you press the [FAX] key to
change to fax mode.
digits) with the numeric keys.
ABC
DEF
MNO
WXYZ
INTERRU
Enter your account
GHI
JKL
number.
PQRS
ACCOUNT #: ---
_
@.-
ACC. #
END
• As the account number is entered, the hyphens (-)
change to asterisks ( ). If you enter an incorrect
digit, press [C] key and re-enter the correct digit.
• When a valid account number is entered, the current
count of the account will appear in the message
display of the base screen. After 6 seconds (factory
default setting), the base screen appears. (p.22)
* In copy mode and print mode, the number of sheets
remaining until the limit is reached is also shown if
settings.
• If an invalid account number is entered in
step 1, the account number entry screen
reappears.
•
system settings is enabled, a warning
message will appear and operation will not
be permitted for 1 minute if an invalid
account number is entered 3 times in a row.
When the copy job is finished, press
the [ACC.#-C] key ( ).
2
Example: Copy mode
If you are performing an
@
COPIES MADE:000,000
auditing mode is enabled, be
sure to press the [INTERRUPT]
REMAINING:050,000
key ( ), [CA] key, or
ACC. #-C
AUTO
[ACC.#-C] key ( ) when
finished to exit interrupt mode.
100%
AUTO
A4
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
COPY FUNCTIONS
3
This chapter explains how to use the copy functions.
NORMAL COPYING
This section explains how to make a regular copy.
Copying from the document glass
Open the SPF/RSPF and place the
original face down on the document
glass.
Make sure that the desired paper tray
is selected.
1
3
Ready to copy.
Align the upper left-hand corner
of the original with the tip of the
mark.
The original size is
automatically detected.
A4
AUTO
100%
AUTO
A4
An original up to A3 (11" x 17") can be
placed on the document glass.
• If the auto paper select function has been
Note
Note
use the [PAPER SELECT] key to select
the desired paper size.
Close the SPF/RSPF.
2
• If you wish to use a size of paper different
from the size automatically selected by
the machine, use the [PAPER SELECT]
key to select the desired paper size.
• Paper in a different orientation from the
original can be selected if the auto paper
select or auto image function has been
selected. In this case, the image of the
original will be rotated.
After placing the original, be
sure to close the SPF/RSPF. If
left open, parts outside of the
original will be copied black,
causing excessive use of toner.
• To make a copy of a small original such as
a card, follow the procedure in "USING
If the original is a non-standard size or the
size was not detected correctly, see
Note
• To use the bypass tray, select it manually.
Set the number of copies.
4
If you are making two or more copies each
Note
of multiple original pages, you can select the
sort function to collate the copies into sets.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
• The centre tray can hold a maximum of
250 sheets (150 sheets when the job
separator tray kit is installed).
Press the [START] key ( ) to begin
copying.
5
Note
•
About one minute after copying ends,
the copy settings to the default settings.
The setting for "Auto clear" can be
The copy is delivered to
the paper output tray.
changed in the system settings. (p.118)
• To cancel a copy job in progress, press
the [C] key.
• Differences in copy conditions may cause
the position of the printed copy image to
vary even the copies are of the same
original on the same paper. For more
information, see "Points concerning the
Copying from the SPF/RSPF
Make sure that an original has not
been left on the document glass.
Close the SPF/RSPF.
Do not place originals of different sizes
together in the document feeder tray. This
may cause misfeeds.
1
Note
3
Adjust the original guides to the size
of the original(s).
Set the number of copies.
2
4
5
Press the [START] key ( ) to begin
copying.
MNO
The copies are delivered to the
centre tray.
WXYZ
The default output mode for
copying from the SPF/RSPF is
sort mode. (p.49)
_
@.-
AD-END
The output mode can be
changed using the automatic
sort selection setting in the system settings. (p.123)
Set the original(s) face up in the
document feeder tray.
3
• The centre tray can hold a maximum of
250 sheets (150 sheets when the job
separator tray kit is installed).
The original size appears
in the display and the
most suitable paper size
is automatically selected.
Insert the stack into the
document feeder tray until
it stops.
Note
• About one minute after copying ends,
the copy settings to the initial settings.
The duration of time after which "Auto
clear" clears the copy settings can be
changed in the system settings. (p.118)
• To stop copying in the middle of a run,
press the [C] key. If you find it difficult to
remove the original from the document
feeder tray, open the feeding roller cover
before removing the original. If you pull
out the original without opening the
feeding roller cover, the original may
become dirty.
• If the original is a non-standard size or the
size was not detected correctly, see
• If the auto paper select function has been
use the [PAPER SELECT] key to select
the desired paper size.
Note
• To copy onto paper of a different size,
press the [PAPER SELECT] key and
select the desired paper size.
•
Paper in a different orientation from the original
may be selected if the auto paper select or
auto image function has been selected. In this
case, the image of the original will be rotated.
• To use the bypass tray, select it manually.
• Do not place originals of different sizes
together in the document feeder tray. This
may cause misfeeds.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
Auto paper select mode (when there are two or more paper trays)
When auto paper select mode is enabled, "AUTO" appears in the paper size display. This function automatically
selects paper that is the same size as the original (A5, B5, B5R, A4, A4R, B4, A3, 5-1/2" x 8-1/2", 8-1/2" x 11",
8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", 11" x 17" paper).
• The sizes of paper that can be used vary by country and region.
• If a zoom setting is selected after placing the original, the paper size that is appropriate for the zoom setting will
be automatically selected.
• "Auto paper select mode" is cancelled if the automatic ratio selection is enabled (p.37) or if a tray is selected
with the [PAPER SELECT] key. Auto paper select resumes operation when the [CA] key is pressed or when
"Auto clear time" activates.
Removing the document cover
Originals that can be used in the SPF/RSPF
To copy large originals like newspapers, remove the
document cover. To remove it, open the document
cover and lift it at a slightly backward angle. To
replace the cover, do the reverse.
Originals that are A5 to A3 (5-1/2" x 8-1/2" to
2
2
11" x 17") and 56 g/m to 90 g/m (15 lbs. to 24 lbs.)
can be used. A maximum of 40 pages can be
placed at once.
The SPF/RSPF cannot be removed.
For originals that are B4 (8-1/2" x 14") or larger (B4,
A3 (8-1/2" x 14", 11" x 17")), a maximum of 30
pages can be placed at once.
• Make sure that there are no paper clips or
Note
staples on the original.
• Straighten curled originals before placing
them in the document feeder tray. Curled
original may cause misfeeds.
• When you set multiple sheets of thick
original, if the original is not fed, reduce
the number of the set originals.
Copying books or originals with folds or
creases
Press down on the document cover/SPF/RSPF
while copying as shown. If the document
cover/SPF/RSPF is not completely closed, shadows
may appear on the copy or it may be fuzzy.
Straighten originals with folds or creases well before
placing.
Originals that cannot be used in the
SPF/RSPF
The following originals cannot be used. These may
cause misfeeds or smudging and unclear images.
• Transparencies, tracing paper, other transparent or
translucent paper, and photographs.
• Carbon paper, thermal paper.
• Originals that are creased, folded, or torn.
• Glued originals, cut-out originals.
• Originals with binder holes.
• Originals printed using an ink ribbon (thermal
transfer printing), originals on thermal transfer
paper.
Stream feeding mode
If "Stream feeding mode" is enabled in the system
for about 5 seconds after all originals are fed. If a
new original is placed in the SPF/RSPF during this
time, the original will be automatically fed in and
copying will begin.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
Points concerning the position of the printed copy image
Even if the same original is copied onto the same type of paper, differences in the original size, scanning location
(document glass or document feeder tray), selected paper tray, enlargement/reduction ratio, and other conditions
may cause the position of the printed copy image on the paper to vary.
As shown in the following example, when an original smaller than the paper size (for example, A5 original and A3
paper) is copied from the document glass, the position of the printed copy image on the paper is different when
paper from tray 1 is used (1) and paper from the bypass tray is used (2).
A5
(1)
copy image
A3
A3 paper
A5
(2)
A5
copy image
A3
A3 paper
3
32
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
MAKING A COPY DARKER OR LIGHTER
The copy exposure can be adjusted as needed to the original. Three exposure modes are available: "AUTO",
"TEXT" and "PHOTO". When "TEXT" or "PHOTO" is selected, the exposure can be manually adjusted to 5 levels.
Auto
This is the default exposure mode. In this mode, the characteristics of an original being copied are "read" by the
exposure system and exposure adjustments are made automatically. The exposure level is lowered for coloured
areas and background shadows.
AUTO
100%
Text/photo
TEXT: This mode enhances low density areas of an original and suppresses high-density background areas to
make text more legible.
PHOTO: This mode provides clearer reproduction of halftones in photos.
Press the [EXPOSURE] key.
Adjust the exposure level as needed
with the [ ] or [ ] key.
1
3
COPY EXPOSURE PAPER SELECT CO
SCAN COLOUR MODE RESOLUTION AD
EXPOSURE
EXPOSURE
AD
FAX PROGRAM RESOLUTION
AUTO
AUTO
AUTO
AUTO
TEXT
PHOTO
TEXT
PHOTO
The copy exposure
screen will appear.
• The exposure level cannot be adjusted when
"AUTO" is selected.
• For a darker image, press the [ ] key. For a lighter
image, press the [ ] key.
• The default exposure levels for "TEXT" and
"PHOTO" can be set in the system settings.
Select the exposure mode that best
suits the original with the [ ] or [ ]
key.
2
PQ
EXPOSURE
Exposure level guidelines
1 to 2: Dark originals such as newspapers
3: Normal density originals
4 to 5: Text written in pencil or light colour
text
Note
AUTO
AUTO
ED COPY
LEX SCAN
LEX SCAN
TEXT
PHOTO
ACC
The [EXPOSURE] key can also be pressed to select
the exposure mode.
Press the [OK] key.
4
When "PHOTO" is selected, "PHOTO
To return to AUTO mode, press
GHI
BACK
OK
Note
can be used to select the method for
expressing halftones. (p.123)
the [EXPOSURE] key, select
"AUTO" with the [ ] key, and
press the [OK] key.
PQRS
PY
33
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
SELECTING THE TRAY
Auto paper select mode (p.31) normally operates (unless it has been disabled), and thus when the original is placed
on the document glass and the original size is selected, or when the original is placed in the SPF/RSPF, the tray with
the same size of paper as the original is automatically selected. If you wish to use a tray other than the automatically
selected tray (for example you wish to enlarge or reduce the copy or use the bypass tray), press the [PAPER
SELECT] key to select the desired tray.
EXPOSURE PAPER SELECT COPY RATIO AUT
COLOUR MODE RESOLUTION ADDRESS FO
ADDRESS
PROGRAM RESOLUTION
BRO
• If the desired paper size does not appear, change the paper in a tray to the desired paper size. (p.26)
• Automatic ratio selection (p.37) does not operate when the bypass tray or a tray set for a special paper size is
selected.
Note
Auto tray switching (when there are two or more paper trays)
If the tray runs out of paper during copying and there is another tray with the same size of paper and the same
feeding orientation (horizontal or vertical), the other tray is automatically selected and copying continues. "Auto tray
3
SETTING THE NUMBER OF COPIES
Press the numeric keys to set the number of copies.
WXYZ
• The set number of copies appears in the display. A maximum of 999 copies (factory default setting) can be set.
• A single copy can be made even if "0" is displayed.
• If you enter the wrong number, press the [C] key and enter the correct number.
Note
Important note when making a large number of copies
If the number of sheets output to the centre tray exceed its maximum capacity (250 sheets when a job separator tray
kit is not installed, 150 sheets when a job separator tray kit is installed) during a copy job, the copy job will stop
temporarily. If this happens, promptly remove the copies and press the [OK] key to resume copying. The copy job
will step each time the number of sheets in the centre tray reach its maximum capacity.
Before starting a long copy run, remove any sheets that remain in the centre tray. During output of the copy job,
exercise care as the job may stop frequently due to the centre tray becoming full.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
SELECTING THE ORIGINAL SIZE
If you loaded a non-standard size* original or the original size was not correctly detected, set the original size manually.
Perform the following steps after placing the document in the document feeder tray or on the document glass.
* Standard sizes:
Note
The following sizes can be detected correctly: A3, B4, A4, A4R, A5 (11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x
11", 8-1/2" x 11"R, 5-1/2" x 8-1/2"). If a non-standard size original is placed (including special sizes), the closest
standard size may be displayed, or the original size may not appear.
Press the [SPECIAL FUNCTION] key.
Press the [OK] key.
1
5
You will return to the base
ON LINE
DATA
OK
SPECIAL FUNCTION
ID CARD COPY
SPECIAL
FUNCTION
screen and the selected original
size will appear in the original
size display.
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
LINE
DATA
COPY EXPOSURE PAPER SE
SCAN OUR MODE RESOLUT
The special function
screen will appear.
Select "ORIG. SIZE ENTER" from the
menu with the [ ] or [ ] key.
2
Selecting an inch original size
PQ
Select the original size with the [ ] or
[ ] key.
SPECIAL FUNCTION
6
ID CARD COPY
SPECIAL MODES
ED COPY
LEX SCAN
LEX SCAN
ORIG. SIZE ENTER
INCH
ORIG. SIZE ENTER
ACC
PAPER SIZE SET
11x17
1
2
8 x14
1
2
8 x11
Press the [OK] key.
3
To return to selection of AB original sizes, press the
GHI
BACK
OK
ORIG. SIZE ENTER
[
] key to return to step 4.
AB
PQRS
A3
B4
A4
Press the [OK] key.
7
PY
You will return to the base
OK
The original size selection
screen will appear.
screen and the selected original
size will appear in the original
size display.
Select the original size with the [ ] or
[ ] key.
4
To cancel an original size selection, press
the [CA] key.
Note
ORIG. SIZE ENTER
AB
A3
B4
A4
The selected original size
is highlighted.
• To select an inch original size, press the [ ] key and
go to step 6.
•
If you selected "SIZE INPUT", follow steps 4 through 6
of the procedure in "USING THE BYPASS TRAY TO
horizontal and vertical dimensions of the original.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
USING THE BYPASS TRAY TO COPY A SPECIAL SIZE ORIGINAL
When the bypass tray is being used for copying and an original that is placed on the document glass is detected as
being a special size, the display will prompt the user to set the original size. To make a copy in this type of situation,
follow the steps below.
Load paper in the bypass tray and place
the original on the document glass.
Press the [OK] key.
1
2
5
If "SIZE INPUT" was selected in step 4:
Touch the [PAPER SELECT] key and
then select the bypass tray.
OK
SIZE INPUT
SIZE(mm)
RE PAPER SELECT COPY RATIO AUTO IMAGE
ODE RESOLUTION ADDRESS FORMAT
[OK]:ORIG. SIZE
O
O
X:
Y:
210
148
ADDRESS
AM RESOLUTION
BROADCAST
ENTER
AUTO
100%
The size entry screen appears and is ready for entry of
the width of the original.
EXTRA
A message will appear asking you whether you wish to
set the original size or make the copy without setting it.
To make a copy without setting the original size, press the
[START] key ( ). To set the original size, go to step 3.
If you selected inches in step 4, the screen will
be ready for you to enter the width in inches.
Note
If other than "SIZE INPUT" was selected in step 4:
3
You will return to the base screen. Go to step 8.
If you load thick paper in the bypass tray,
Note
press the [PAPER] key until "EXTRA" is
highlighted. The paper type is set to thick
paper. The setting is cleared when "Auto
clear" works or the [CA] key is pressed.
For restrictions on paper types and weights,
Select "X" (width) with the [ ] or [ ] key
6
and enter the width with the [ ] or [ ] key,
and then do the same for the length (Y).
SIZE INPUT
SIZE(mm)
[OK]:ORIG. SIZE
ENTER
X:
Y:
100
100
AUTO
100%
EXTRA
•
Any number from 64 mm to 432 mm (2-1/2"
to 17") can be entered for the width, and
any number from 64 mm to 297 mm (2-1/2"
to 11-5/8") can be entered for the length.
Note
Press the [OK] key.
3
• The entered size is retained until the
power is turned off, even if "SIZE INPUT"
is selected again and the entry screen of
step 5 is displayed.
GHI
BACK
OK
ORIG. SIZE ENTER
AB
A4R
PQRS
A5
Press the [OK] key.
PY
7
8
SIZE INPUT
You will return to the base
screen.
The original size selection screen appears with "SIZE
INPUT" selected.
OK
Select AB or inches with the [ ] or
[ ] key, and then select the original
size with the [ ] or [ ] key.
4
Press the [START] key ( ).
MNO
Copying begins.
WXYZ
PQ
_
@.-
AD-END
ED COPY
LEX SCAN
LEX SCAN
ACC
36
Download from Www.Somanuals.com. All Manuals Search And Download.
REDUCING OR ENLARGING A COPY
There are three ways to enlarge and reduce copies:
• Automatic selection of a ratio according to the paper size: Auto ratio selection
• Specifying a ratio from 25% to 400%: Preset ratios/zoom
• Selecting the vertical and horizontal ratios separately: XY zoom
When the SPF/RSPF is being used, the zoom copy ratio range is 50% to 200%.
Note
AUTOMATIC RATIO SELECTION
Place the original in the document
feeder tray or on the document glass.
Press the [AUTO IMAGE] key.
1
3
CT COPY RATIO AUTO IMAGE
OUTPUT 2-S
ADDRESS FORMAT ORIGINAL SIZE DU
ADDRESS DU
N
N
BROADCAST ORIGINAL SIZE
The original size will appear in the display. If the
correct size does not appear, see "SELECTING THE
• The copy ratio will be automatically set.
•
If the original and paper are in different orientations,
the image is automatically rotated to match the paper
orientation (rotation copy). However, if enlargement is
selected for copying onto a paper size larger than A4
(8-1/2" x 11"), the image will not be rotated.
Automatic ratio selection can be used when
Note
the original size is , A3, B4, A4, A4R, A5,
11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x
11", 8-1/2" x 11"R and 5-1/2" x 8-1/2". It
cannot be used for other sizes.
• Rotation of the image can be disabled in the system
settings when reducing or enlarging a original.
• If the message "Image edge loss." is displayed, part
of the original image may be cut off.
Press the [PAPER SELECT] key to
select the desired tray.
2
AUT If the bypass tray is selected,
Set the number of copies and press
the [START] key ( ).
EXPOSURE PAPER SELECT COPY RATIO
4
COLOUR MODE RESOLUTION ADDRESS FO
automatic ratio selection cannot
ADDRESS
PROGRAM RESOLUTION
BRO be used.
WXYZ
• To cancel automatic ratio selection, press the [AUTO
IMAGE] key again.
• When copying from the SPF/RSPF, automatic ratio
selection mode will automatically disable after the
[START] key is pressed and the original is scanned.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
MANUAL RATIO SELECTION (PRESET COPY
RATIOS/ZOOM)
• To cancel a ratio setting, return the ratio to 100%
with the [ ] or [ ] key.
• The [COPY RATIO] key can be pressed to return the
ratio to 100%.
Place the original in the document
1
feeder tray or on the document glass.
Press the [OK] key.
4
You will return to the base
screen.
GHI
BACK
OK
PQRS
Press the [COPY RATIO] key.
2
PY
E
E
M
PAPER SELECT COPY RATIO AUTO IMAGE
RESOLUTION ADDRESS FORMAT ORIG
ADDRESS
BROADCAST ORIG
O
COPY RATIO
115%
RESOLUTION
Make sure that the desired paper tray
is selected.
5
100%
86%
If the auto paper select function has been
enabled, the appropriate copy paper size will
have been automatically selected based on the
original size and the selected copy ratio. If the
auto paper select function has been cancelled or
if you are copying onto a different size paper, use
the [PAPER SELECT] key to select the paper
tray with the desired paper size.
ZOOM
100%
3
Copy ratios that can be
selected will appear.
Select a preset ratio with the [ ] or
[ ] key, or set the ratio (zoom) with
the [ ] or [ ] key.
3
PQ
Set the number of copies and press
the [START] key ( ).
6
ED COPY
LEX SCAN
LEX SCAN
WXYZ
ACC
[
[
[
[
] key: Select a larger preset ratio
] key: Select a smaller preset ratio
] key: Decrease the ratio in increments of 1%
] key: Increase the ratio in increments of 1%
• Preset reduction ratios are: 86%, 81%, 70%, 50%
and 25% (95%, 77%, 64%, 50% and 25%). 25% can
only be selected when the original is placed on the
document glass.
• Preset enlargement ratios are: 115%, 122%, 141%,
200% and 400% (121%, 129%, 141%, 200% and
400%). 400% can only be selected when the original
is placed on the document glass.
• Zoom ratios: Any ratio from 25% to 400% (50% to
200% when the original is placed in the document
feeder tray) can be set in increments of 1%. You can
use the [ ] or [ ] key to set the approximate ratio
and then press the [ ] key to decrease the ratio or
the [ ] key to increase the ratio.
• To decrease or increase the zoom ratio rapidly, hold
down the [ ] or [ ] key. However the value will
stop at the preset reduction or enlargement ratios.
To move beyond these ratios, release the key and
then hold it down again. (Note that if the key auto
repeat function has been disabled in the system
settings, the ratio will not change when the key is
p.119.))
38
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
SELECTING THE VERTICAL AND HORIZONTAL COPY
RATIOS SEPARATELY (XY ZOOM Copying)
The XY ZOOM feature allows the horizontal and vertical copy ratios to be changed independently.
Example: Reduction only in the horizontal direction.
Original
Copy
• To use the XY ZOOM feature with the DUAL PAGE COPY feature, set the DUAL PAGE COPY feature first and
then the XY ZOOM feature.
Note
• The XY ZOOM feature cannot be used in combination with the AUTO IMAGE function.
Ratios that can be selected will vary depending on the position of the original.
Original position
Document glass
SPF/RSPF
Selectable ratios
25% – 400%
50% – 200%
Place the original in the document
feeder tray or on the document glass.
Select "XY ZOOM" with the [ ] or [ ]
key.
1
2
4
PQ
SPECIAL MODES
DUAL PAGE COPY
ED COPY
LEX SCAN
LEX SCAN
2in1/4in1
XY ZOOM
ACC
[OK]:ADJUST
Press the [SPECIAL FUNCTION] key
and select "SPECIAL MODES" with
the [ ] or [ ] key.
Press the [OK] key.
5
ON LINE
DATA
OK
SPECIAL FUNCTION
ID CARD COPY
XY ZOOM
SPECIAL
FUNCTION
115%
100%
86%
ZOOM
X: 100%
Y: 100%
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
LINE
DATA
COPY EXPOSURE PAPER SE
SCAN COLOUR MODE RESOLUT
[ ]:
X Y
The special function
screen will appear.
The XY zoom screen will appear, ready for selection of
the X (horizontal) ratio.
Press the [OK] key.
3
Set the horizontal ratio with the [ ],
[ ], [ ], or [ ] keys.
6
GHI
BACK
OK
SPECIAL MODES
MARGIN SHIFT
ERASE
A preset ratio can be selected
with the [ ] or [ ] keys. The
ratio can be adjusted in
increments of 1% with the [
or [ ] keys.
PQRS
]
DUAL PAGE COPY
[OK]:ADJUST
PY
The special modes
screen will appear.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
Press the
key.
Select any other copy settings as
needed and press the [START] key
( ).
7
11
XY ZOOM
115%
MNO
@
ZOOM
X: 115%
Y: 100%
WXYZ
100%
_
@.-
ACC. #-C
86%
AD-END
[ ]:
X Y
The vertical ratio can now be selected.
If the [COPY RATIO] key is pressed when
XY zoom ratios are set, the following screen
appears.
Note
Set the vertical ratio with the [ ], [ ],
[ ], or [ ] keys.
8
A preset ratio can be selected
with the [ ] or [ ] keys. The
ratio can be adjusted in
XY ZOOM
ADJUST
OFF
increments of 1% with the [
or [ ] keys.
]
To change the copy ratio in the
horizontal direction again, press
To cancel the XY zoom ratio settings, select
"OFF" and press the [OK] key.
the
key.
3
To adjust the XY zoom copy ratios, select
"ADJUST" and press the [OK] key.
Press the [OK] key.
9
OK
Ready to copy.
A4R
X115%AUYTO99%
AUTO
B4
You will return to the base
screen.
Make sure that the desired paper tray
is selected.
10
If the auto paper select function has been
enabled, the appropriate copy paper size will be
automatically selected based on the original size
and the selected copy ratios. Image rotation will
take place if necessary.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTOMATIC TWO-SIDED COPYING
(MX-M182D/MX-M202D/MX-M232D)
Two originals placed on the document glass can be copied onto each side of a single sheet of paper. In addition, an
RSPF can be used to copy two originals onto one sheet of paper, or one two-sided original onto two sheets of paper,
or one two-sided original onto each side of one sheet of paper. This function is convenient for making copies for
identification purposes and helps save paper.
Original → Paper
Usable paper
One-sided original → Two sides
A5 to A3
Document
glass
(8-1/2" x 11" to 11" x 17")
• The bypass tray cannot be
used.
One-sided original → Two sides
SPF
A5, B5, B5R, A4, A4R, B4, A3
(8-1/2" x 11", 8-1/2" x 11"R,
8-1/2" x 13", 8-1/2" x 14", 11"
x 17")
• Special paper and 5-1/2" x
8-1/2" paper cannot be
used.
• The bypass tray cannot be
used.
One-sided original
→ Two sides
Two-sided original
Two-sided original
→ One side
→ Two sides
RSPF
• The sizes of paper that can be loaded vary by country and region.
• To use paper in the bypass tray, make a two-sided copy as explained in "TWO-SIDED COPYING USING THE
Note
• There are restrictions on the paper that can be used for automatic two-sided copying. See "Paper that can be
• Automatic two-sided copying is not possible when the bypass tray is used.
B4 or A3
(8-1/2" x 14" or 11" x 17")
portrait original
If the orientation of
two-sided copying
is changed
Normal automatic
two-sided copying
2
1
Orientation of the
placed original
2
The top and bottom of
the images on the front
and back are reversed.
The top and bottom of the
images on the front and
back are the same.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
TWO-SIDED COPYING OF ONE-SIDED ORIGINALS
• Paper sizes that can be used are A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11"
and 8-1/2" x 11"R.
• Automatic two-sided copying is not possible when the bypass tray is used.
Copying from the SPF/RSPF
Make sure that an original does not
remain on the document glass, and
then adjust the original guides to the
width of your originals and place the
originals face up in the document
feeder tray.
If you wish to have the orientation of
the image on the back of the copy
paper be opposite the orientation of
the image on the front, set "BINDING
CHANGE" to "ON" with the [ ] or [ ]
key.
1
4
3
If you placed an odd number of
originals, the last copy will be
one-sided.
COPY MODE
1 to 1
1 to 2
2 to 2
BINDING CHANGE ON
If the copies are to be bound at the top, reversing the
orientations of the images on the front and back sides
of each copy will result in a uniform orientation when
the bound copies are viewed (note that this may
depend on the orientation of the originals).
Press the [2-SIDED COPY] key.
2
OUTPUT 2-SIDED COPY
ORIGINAL SIZE DUPLEX SCAN
DUPLEX SCAN
ORIGINAL SIZE
COPY MODE
1 to 1
T
1 to 2
Press the [OK] key.
5
2 to 2
The duplex mode selection
screen appears.
You will return to the base
screen.
GHI
BACK
OK
PQRS
Select "1 to 2" with the [ ] or [ ] key,
or with the [2-SIDED COPY] key.
3
PY
PQ
COPY MODE
Set the number of copies and press
the [START] key ( ).
1 to 1
1 to 2
6
ED COPY
LEX SCAN
LEX SCAN
To stop copying in the middle of
2 to 2
WXYZ
ACC
a run, press the [C] key.
BINDING CHANGE OFF
42
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
Copying from the document glass
Place the original for the front side of
the copy on the document glass, and
close the SPF/RSPF.
Make sure that the desired paper tray
is selected.
1
6
7
Set the number of copies and press
the [START] key ( ).
WXYZ
Press the [2-SIDED COPY] key.
2
Remove the first original and then
place the original for the back side of
the copy on the document glass.
Close the SPF/RSPF and press the
[START] key ( ).
8
OUTPUT 2-SIDED COPY
ORIGINAL SIZE DUPLEX SCAN
DUPLEX SCAN
ORIGINAL SIZE
COPY MODE
T
1 to 1
1 to 2
2 to 2
MNO
The duplex mode selection
screen appears.
WXYZ
_
@.-
AD-END
Select "1 to 2" with the [ ] or [ ] key,
or with the [2-SIDED COPY] key.
3
PQ
COPY MODE
• The copy will be delivered to the centre tray.
• To cancel two-sided copying, press the [C] key.
• To cancel two-sided (duplex) copy mode, press the
[2-SIDED COPY] key to select "1 to 1" and then
press the [OK] key.
1 to 1
1 to 2
ED COPY
LEX SCAN
LEX SCAN
2 to 2
ACC
BINDING CHANGE OFF
• When making two-sided copies of an odd number of
originals, touch the [READ-END] key ( ) after
scanning the last original.
If you wish to have the orientation of
the image on the back of the copy
paper be opposite the orientation of
the image on the front, set "BINDING
CHANGE" to "ON" with the [ ] or [ ]
key.
4
COPY MODE
1 to 1
1 to 2
2 to 2
BINDING CHANGE ON
Press the [OK] key.
5
You will return to the base
screen.
GHI
BACK
OK
PQRS
PY
43
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
TWO-SIDED COPIES OF TWO-SIDED ORIGINALS
(ONLY WHEN USING THE RSPF)
• Paper sizes that can be used are A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11"
and 8-1/2" x 11"R.
• Automatic two-sided copying is not possible when the bypass tray is used.
• This copy function cannot be used in combination with dual page copy.
Make sure that an original does not
remain on the document glass, and
then adjust the original guides to the
width of your originals and place the
originals face up in the document
feeder tray.
Press the [OK] key.
1
4
You will return to the base
screen.
GHI
BACK
OK
PQRS
PY
3
Set the number of copies and press
the [START] key ( ).
5
To stop copying in the middle of
WXYZ
a run, press the [C] key.
Press the [2-SIDED COPY] key.
2
OUTPUT 2-SIDED COPY
ORIGINAL SIZE DUPLEX SCAN
DUPLEX SCAN
ORIGINAL SIZE
COPY MODE
1 to 1
T
1 to 2
2 to 2
The duplex mode selection
screen appears.
Select "2 to 2" with the [ ] or [ ] key,
or with the [2-SIDED COPY] key.
3
PQ
COPY MODE
1 to 1
1 to 2
ED COPY
LEX SCAN
LEX SCAN
2 to 2
ACC
44
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
ONE-SIDED COPIES OF TWO-SIDED ORIGINALS
(ONLY WHEN USING THE RSPF)
• Paper sizes that can be used are A3, B4, A4, A4R, B5, B5R, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11"
and 8-1/2" x 11"R.
• Automatic two-sided copying is not possible when the bypass tray is used.
• This copy function cannot be used in combination with dual page copy.
Make sure that an original does not
remain on the document glass, and
then adjust the original guides to the
width of your originals and place the
originals face up in the document
feeder tray.
If you wish to have the orientation of
the back image be opposite the
orientation of the front image, set
"BINDING CHANGE" to "ON" with the
[ ] or [ ] key.
1
4
COPY MODE
1 to 2
2 to 2
2 to 1
BINDING CHANGE ON
If the copies are to be bound at the top, reversing the
orientations of the front and back images will result in a
uniform orientation when the bound copies are viewed (note
that this may depend on the orientation of the originals).
Press the [2-SIDED COPY] key.
2
OUTPUT 2-SIDED COPY
ORIGINAL SIZE DUPLEX SCAN
DUPLEX SCAN
ORIGINAL SIZE
COPY MODE
1 to 1
T
Press the [OK] key.
5
1 to 2
You will return to the base
screen.
GHI
2 to 2
BACK
OK
The duplex mode selection
screen appears.
PQRS
PY
Select "2 to 1" with the [ ] or [ ] key,
or with the [2-SIDED COPY] key.
3
Set the number of copies and press
the [START] key ( ).
6
PQ
COPY MODE
1 to 2
2 to 2
To stop copying in the middle of
WXYZ
ED COPY
LEX SCAN
LEX SCAN
a run, press the [C] key.
2 to 1
ACC
BINDING CHANGE OFF
45
Download from Www.Somanuals.com. All Manuals Search And Download.
TWO-SIDED COPYING USING THE
BYPASS TRAY
To perform manual two-sided copying, follow these steps.
Example: Copying originals A and B onto each side of one sheet of paper
If you are using the MX-M182D/MX-M202D/
MX-M232D
The MX-M182D/MX-M202D/MX-M232D is equipped
standard with an automatic two-sided copying function
that automatically turns over the paper. If paper in
this enables easier two-sided copying than using the
Copy
Original B
Original A
Copy original A.
Turn the copy of original A over, and
1
3
without changing the position of the
edge closest to you, insert it in the
bypass tray.
3
Insert the paper all the
way in.
1
1
Copy of
original A
Original A
2
1
1
Copy of
original A
Original B
Copy of
original A
Original A
Copy of
original A
Original B
Place original B as shown below.
2
Vertically-oriented
original:
If the original is oriented
vertically, place it in the
2
same orientation as
original A.
Original B
• Copies made on the back side of paper
should always be made one sheet at a time
using the bypass tray.
• Straighten curled or wavy paper before
using it. Curled paper may cause misfeeds,
creases, or a poor-quality image.
Note
Horizontally-oriented
original:
If the original is oriented
horizontally, place it with
the top and bottom and
•
After placing the original, be sure to close the
document cover/SPF/RSPF. If left open,
parts outside of the original will be copied
black, causing excessive use of toner.
left and right sides
Original B
reversed with respect to
the placement of original
A.
Select the bypass tray with the
[PAPER SELECT] key, and then press
the [START] key ( ).
4
The copy is delivered to the paper output tray.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
DUAL PAGE COPYING
A dual page original can be automatically separated into two pages during copying. This feature is convenient for
making copies of books and other dual page originals on individual sheets of paper.
Copy
Original
• A4 (8-1/2" x 11") paper is used for dual page copying.
Note • When rotation copy is enabled, A4R (8-1/2" x 11"R) paper can also be used.
• When used in combination with XY ZOOM copying, enlargement is not possible.
• Dual page copying cannot be used in combination with the following functions:
• Enlargement
• 2 IN 1 / 4 IN 1 copying
• Centre erase
• Automatic ratio selection cannot be used when dual page copying is used.
• Dual page copying cannot be selected when an original is placed in the SPF/RSPF.
Place the original on the document
glass, aligning the division between
the pages with the size marker (see
below). Close the SPF/RSPF.
Copying will begin from the
Select "DUAL PAGE COPY" with the
1
4
[ ] or [ ] key.
PQ
SPECIAL MODES
MARGIN SHIFT
B5, A4
(81/2x11
)
ED COPY
LEX SCAN
LEX SCAN
ERASE
page to the right of the size
marker.
DUAL PAGE COPY
ACC
[OK]:OFF ON
Press the [OK] key.
5
To keep the copies in the correct page order
when performing dual page copying over
multiple pages, make sure that the original
is always placed on the document glass with
the smaller page number to the right.
Note
A checkmark appears in the
"DUAL PAGE COPY" checkbox
in the special modes screen
and you return to the base
screen.
OK
Press the [SPECIAL FUNCTION] key
and select "SPECIAL MODES" with
the [ ] or [ ] key.
2
Make sure that the paper tray with A4
(8-1/2" x 11") paper is selected.
A4R (8-1/2" x 11"R) paper can also be used if
rotation copying is possible in auto paper select
mode.
6
7
ON LINE
DATA
SPECIAL FUNCTION
ID CARD COPY
SPECIAL
FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
LINE
DATA
COPY EXPOSURE PAPER SE
SCAN COLOUR MODE RESOLUT
Select any other copy settings as
needed and press the [START] key
( ).
The special function
screen will appear.
MNO
Press the [OK] key.
WXYZ
3
_
@.-
GHI
BACK
OK
SPECIAL MODES
MARGIN SHIFT
ERASE
AD-END
PQRS
To cancel dual page copy, select "DUAL PAGE
COPY" (which has a checkmark) in the special modes
screen once again and press the [OK] key.
DUAL PAGE COPY
[OK]:ADJUST
PY
The special modes
screen will appear.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
INTERRUPTING A COPY RUN
(Interrupt copying)
A copy run can be temporarily interrupted to allow another copy job to be performed. (Interrupt copying)
When the other job is finished, the copy run will resume using the original copy settings.
• Interrupt copying is not possible when the document glass is being used for a copy job and "NO SORT" is
selected.
• When 2 in 1 or 4 in 1 is selected, interrupt copying is not possible.
• Sort copying, 2 in 1, and 4 in 1 and automatic two-sided copying cannot be used for an interrupt copy job.
Configuring settings in the system settings, use as a scanner, and fax transmission are also not possible.
Press the [INTERRUPT] key ( ).
Set the number of copies and then
press the [START] key ( ).
1
4
MNO
If the [INTERRUPT] key ( ) is
pressed, copying will stop and
the settings will temporarily
return to the default settings
after the copy in progress has
been completed.
WXYZ
INTERRUPT
_
@.-
AD-END
The INTERRUPT indicator will blink until the current
copy run stops.
3
(C)
Note
If you press the [INTERRUPT] key (
)
Note
when auditing mode is enabled, "Enter your
account number." will appear in the display.
Enter your account number using the
(B)
(A)
numeric keys. The pages copied during
interrupt copying will be added to the count
of the entered account number. (p.114)
The interrupt copies will be offset from the
previous copies. (Offset function)
The offset function can be disabled in the
system settings. (p.117)
(A): Copies made before the interrupt
copy job
(B): Interrupt copies
(C): Copies made after the interrupt
copy job
When the copy run stops, remove the
previous original(s) and place the
original(s) of the interrupt copy job.
2
3
Select copy settings as needed.
* This function is not available in some
countries and regions.
When the copy job is finished, press
the [INTERRUPT] key ( ) to end
interrupt mode and remove the
original(s).
5
The INTERRUPT indicator will turn off, indicating
that the interrupt function is no longer operating.
The copy settings will automatically revert to the
settings selected for the copy run before the run
was interrupted.
Replace the previous original(s) and
press the [START] key ( ).
The interrupted copy run will resume.
6
48
Download from Www.Somanuals.com. All Manuals Search And Download.
CONVENIENT COPY FUNCTIONS
This section explains major convenient copy functions.
ROTATING THE IMAGE 90 DEGREES (Rotation Copy)
When "Auto paper select mode" or "automatic ratio selection" are in operation and the original is placed in a different
orientation (vertical or horizontal) than the paper, the original image will be automatically rotated 90 degrees to
enable correct copying onto the paper.
This function is convenient for copying B4 or A3 (8-1/2" x 14" or 11" x 17") originals, which can only be placed
horizontally, onto paper that is loaded vertically.
The rotation copy function is initially enabled. It can be disabled in the system settings. (p.122)
• Rotation copy will not operate when a copy is enlarged to a paper size greater than A4 (8-1/2" x 11"). In this
Note
case, place the original in the same orientation as the paper.
• When 2 IN 1 / 4 IN 1 copy is used (p.51), rotation copy will operate even if disabled in the system settings.
Orientation of
Orientation of
Copy
the placed original
the loaded paper
SORT COPY/GROUP COPY
● Copies of multiple original pages can be sorted into sets. (Sort copy)
● Copies of multiple original pages can be grouped by page. (Group copy)
The machine can scan standard originals (A4 (8-1/2" x 11")) with approximately 160 pages, however, the number
will vary for photos and other types of originals. Less pages can be scanned for interrupt copying.
Note
Sort copy
Group copy
49
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
Place the originals in the document
feeder tray or the first original on the
document glass.
When the START indicator lights,
1
6
7
replace the original with the next
original and press the [START] key
( ).
If the originals are placed in the
document feeder tray, sort
mode will be automatically
selected. This can be changed
to no sort in the system settings.
Repeat step 6 until all originals
have been scanned.
If the first original is placed on the document glass, no
sort mode will be automatically selected.
When all originals have been
scanned, press the [READ-END] key
( ).
Press the [OUTPUT] key.
2
_
@.-
O
AUTO IMAGE
FORMAT ORIGINAL SIZE DUPLEX SCAN
DUPLEX SCAN
OUTPUT 2-SIDED COPY
SORT
BROADCAST ORIGINAL SIZE
READ-END
#-C
NO SORT
SORT
• Copying will start.
• If the memory becomes full while the originals are
being scanned, "Memory is full." will appear in the
display. To start copying the originals that have been
scanned to that point, press the [START] key ( ).
To cancel the copy job, press the [CA] key.
The output mode
selection screen will
appear.
3
Select "NO SORT" or "SORT" with the
[ ] or [ ] key, or with the [OUTPUT]
key.
•
The optional memory board (MX-EB14) can be installed
to increase the number of originals that can be scanned.
The memory can be expanded up to a maximum of 256
MB (the amount expanded is 128 MB).
3
PQ
Offset function
ED COPY
LEX SCAN
LEX SCAN
This function offsets each set of copies from the
previous set in centre tray, making it easy to separate
sets of copies. The offset function can be disabled in
the system settings. (p.117)
ACC
Press the [OK] key.
4
Offset function disabled
Offset function enabled
You will return to the base
screen.
GHI
BACK
OK
PQRS
PY
* This function is not available in some countries and
regions.
Select other copy settings as needed
and press the [START] key ( ).
5
MNO
If you placed the originals in the
document feeder tray in step 1,
copying will start. If you
WXYZ
_
@.-
selected "SORT" in step 3 and
placed the first original on the
document glass, follow steps 6
and 7. Note that if you selected
"NO SORT" in step 3, copying
will begin.
AD-END
50
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
COPYING MULTIPLE ORIGINALS ONTO A SINGLE
SHEET OF PAPER (2 IN 1 / 4 IN 1 Copy)
Multiple originals can be copied onto a single sheet of paper in a selected layout pattern.
This function is convenient for compiling multi-page reference materials into a compact format, or for providing an
overview of all pages of a document on a single page.
4 IN 1 COPY
2 IN 1 COPY
Pattern 2
Pattern 1
Pattern 1
Pattern 2
Pattern 3
Pattern 4
• 2 in 1 / 4 in 1 copy cannot be used in combination with the following functions. The function selected first will take
precedence. However, 2 in 1 / 4 in 1 copy will take precedence over XY zoom.
Dual page copy, XY zoom, edge erase, margin shift, card shot
• A special paper size cannot be used for 2 in 1 / 4 in 1 copy.
• 2 in 1 / 4 in 1 copy cannot be selected for an interrupt copy job. Interrupt copying is not possible during a 2 in 1 / 4
in 1 copy job.
• An appropriate ratio setting will be automatically selected based on the original size, the paper size, and the
selected number of images. When using the document glass, reduction is possible to 25%. When using the
SPF/RSPF, reduction is possible to 50%. Certain combinations of original size, paper size, and number of images
may result in images being cut off.
• Even if "Rotation copy" is disabled in the system settings, the images may be rotated if needed depending on the
orientation of the originals and the orientation of the paper.
Place the originals in the document
feeder tray or the first original on the
document glass.
Press the [SPECIAL FUNCTION] key
and select "SPECIAL MODES" with
the [ ] or [ ] key.
1
3
ON LINE
DATA
SPECIAL FUNCTION
ID CARD COPY
SPECIAL
FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
LINE
DATA
COPY EXPOSURE PAPER SE
SCAN COLOUR MODE RESOLUT
The special function
screen will appear.
Press the [PAPER SELECT] key to
select the desired paper tray.
AUT The bypass tray cannot be
2
Press the [OK] key.
4
EXPOSURE PAPER SELECT COPY RATIO
COLOUR MODE RESOLUTION ADDRESS FO
selected.
ADDRESS
PROGRAM RESOLUTION
BRO
GHI
BACK
OK
SPECIAL MODES
MARGIN SHIFT
ERASE
PQRS
DUAL PAGE COPY
[OK]:ADJUST
PY
The special modes
screen will appear.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
Select "2in1/4in1" with the [ ] or [ ]
key.
Select the borderline setting with the
10
[ ] or [ ] key.
5
PQ
SPECIAL MODES
2in1
DUAL PAGE COPY
2in1/4in1
PATTERN 1
ED COPY
LEX SCAN
LEX SCAN
XY ZOOM
ACC
[OK]:CHANGE
BORDER
Select solid line, broken line, or none.
Press the [OK] key.
6
Press the [OK] key.
11
OK
2in1/4in1
You will return to the base
OK
OFF
2in1
screen.
4in1
[OK]:CHANGE
The 2 in 1 / 4 in 1
selection screen will
appear.
Select other copy settings as needed
and then press the [START] key ( ).
12
MNO
3
WXYZ
Select "2in1" or "4in1" with the [ ] or
[ ] key.
7
_
@.-
AD-END
• The copy ratio will be set automatically.
• If you placed the originals in the document feeder
tray, copying will start after all originals are scanned.
• If you placed the first original on the document glass,
go to the next step.
Press the [OK] key.
8
OK
2in1
When the START indicator lights,
13
PATTERN 1
replace the original with the next
original and then press the [START]
key ( ).
BORDER
NO
Repeat step 13 until all originals
have been scanned.
The settings for 2 in 1 or
4 in 1 will appear.
Select the layout with the [ ] or [ ]
key.
9
• Copies will be output each time two originals for 2 in
1 copy or four originals for 4 in 1 copy have been
scanned.
• To start copying before all originals have been
scanned (after only one original has been scanned
for 2 in 1 or after three originals or less have been
scanned for 4 in 1), press the [READ-END] key ( ).
• To cancel the 2 in 1 or 4 in 1 settings, select "OFF" in
step 7.
For the layouts that can be
selected, see "2 IN 1 COPY" or
52
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
CREATING MARGINS WHEN COPYING(Margin shift)
The margin shift function shifts the image to create a margin at the edge of the paper. By default the function creates
a 10 mm (1/2") margin at the left edge of the paper.
Margin (top)
Margin (left edge)
A A A A
Original
Copy
Original
Copy
• You can select whether to create a margin at the top edge or at the left edge of the paper.
• Five selections are available for the margin width: 0 mm, 5 mm, 10 mm, 15 mm, 20 mm (0", 1/4", 1/2", 3/4", 1").
(The default setting is 10 mm (1/2").)
• When making two-sided copies, a margin is created at the selected edge on the front side of the paper, and a
margin is created on the back side of the paper.
• When margin shift is selected, rotating copying will not operate even if the condition for rotate copying is met.
• The default margin shift setting can be changed in the system settings. (p.121)
Place the original in the document
feeder tray or on the document glass.
Press the [OK] key.
1
4
• When a left-edge margin is
selected and you are copying
from the document feeder
tray, place the original face up
so that the margin edge is to
the left.
OK
MARGIN SHIFT
OFF
DOWN
RIGHT
10 mm
(0~20)
The settings for margin
shift will appear.
When a left-edge margin is selected and you are
copying from the document glass, set the original
face down so that the margin edge is to the right.
• When a top-edge margin is selected, place the
original with the margin edge toward the rear of the
document feeder tray or the document glass.
Select the margin location with the
[ ] or [ ] key and select the width
with the [ ] or [ ] key.
5
• Select "DOWN" or "RIGHT"
for the margin location.
• If you select 0 mm (0"), the
printed result is the same as
when "OFF" is selected.
Press the [SPECIAL FUNCTION] key
2
PQ
and select "SPECIAL MODES" with
the [ ] or [ ] key.
ED COPY
LEX SCAN
LEX SCAN
ON LINE
SPECIAL FUNCTION
DATA
SPECIAL
FUNCTION
ACC
ID CARD COPY
SPECIAL MODES
LINE
DATA
Press the [OK] key.
COPY EXPOSURE PAPER SE
SCAN OUR MODE RESOLUT
ORIG. SIZE ENTER
6
7
PAPER SIZE SET
You will return to the base
screen.
OK
The function screen appears with "SPECIAL MODES"
selected.
Press the [OK] key.
3
Select other copy settings as needed
and press the [START] key ( ).
GHI
MNO
BACK
OK
SPECIAL MODES
To turn off the margin shift
function, select the margin shift
feature again and select "OFF".
WXYZ
MARGIN SHIFT
PQRS
_
@.-
ERASE
AD-END
DUAL PAGE COPY
PY
[OK]:ADJUST
The special modes screen will appear with "MARGIN
SHIFT" selected.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
ERASING SHADOWS AROUND THE EDGES OF A
COPY (Erase Copy)
● This feature is used to erase shadows that appear around the edges of copies of books and other thick originals.
(EDGE ERASE)
● The feature can also erase the shadow that appears down the centre of books and other originals that open up.
(CENTRE ERASE)
● The factory default setting for the width of the erasure is approximately 10 mm (1/2"). The width can be changed
in the system settings. (p.121)
Edge erase
Centre erase
Edge + Centre erase
A B
A B
A B
A A B
A
• Five selections are available for the erasure width: 0 mm, 5 mm, 10 mm, 15 mm, 20 mm (0", 1/4", 1/2", 3/4", 1").
(The default setting is 10 mm (1/2").)
• Edge erase cannot be used when paper is fed from the bypass tray.
• Edge erase cannot be used when copying a special size original.
• Note that if the width of the erasure is too large, the edge of the image may be partially erased.
• The default setting for the erasure width can be changed. (p.121)
3
Place the original in the document
feeder tray or on the document glass.
Select "ERASE" with the [ ] or [ ]
key.
1
2
4
PQ
SPECIAL MODES
MARGIN SHIFT
ERASE
ED COPY
LEX SCAN
LEX SCAN
DUAL PAGE COPY
ACC
[OK]:ADJUST
The edge erase settings
screen will appear.
Press the [SPECIAL FUNCTION] key
and select "SPECIAL MODES" with
the [ ] or [ ] key.
Press the [OK] key.
5
ON LINE
DATA
SPECIAL FUNCTION
ID CARD COPY
SPECIAL
FUNCTION
OK
ERASE
OFF
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
LINE
DATA
EDGE
COPY EXPOSURE PAPER SE
SCAN COLOUR MODE RESOLUT
CENTRE
10 mm
(0~20)
The edge erase settings
screen will appear.
The function screen appears with "SPECIAL MODES"
selected.
Select the desired erase mode with
the [ ] or [ ] key.
6
Press the [OK] key.
3
"EDGE", "CENTRE" or
"EDGE+CENTRE" can be
selected.
GHI
BACK
OK
SPECIAL MODES
MARGIN SHIFT
PQRS
ERASE
DUAL PAGE COPY
PY
[OK]:ADJUST
The special modes
screen will appear.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
Select the erasure width with the [ ]
7
8
or [ ] key.
If you select 0 mm (0"), the
printed result is the same as
when "OFF" is selected.
Press the [OK] key.
You will return to the base
screen.
OK
Select other copy settings as needed
and press the [START] key ( ).
9
MNO
To cancel an edge erase
setting, return to the edge erase
settings screen and select
"OFF".
WXYZ
_
@.-
AD-END
55
Download from Www.Somanuals.com. All Manuals Search And Download.
CARD SHOT
When copying a card, this function allows you to print the front and back sides of the card next to each other on a
single sheet of paper.
This function creates 2 in 1 images of the front and back side of the card and centres them on the paper.
Original
Copy
CARD
CARD
Front of
card
CARD
Back of
card
Example:
Portrait
A4 size
Example:
Landscape
A4 size
• Paper cannot be fed from the bypass tray.
• The card shot function cannot be used in combination with margin shift, edge erase, dual page copy, 2 in 1 / 4 in 1
copy, and XY zoom copy.
• When card shot is used, the rotation copy function does not operate.
Place the original on the document
glass.
Press the [OK] key.
1
5
3
OK
CARD SHOT
SIZE(mm)
X:
86
54
Y:
The card shot screen
appears.
Press the [SPECIAL FUNCTION] key
and select "SPECIAL MODES" with
the [ ] or [ ] key.
2
The default values for the length and width
that initially appear when this screen is
displayed can be set "CARD SHOT
Note
ON LINE
DATA
SPECIAL FUNCTION
ID CARD COPY
SPECIAL
FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
Select "X" (width) with the [ ] or [ ]
key and enter the width with the [ ] or
[ ] key, and then do the same for the
length (Y).
LINE
DATA
6
COPY EXPOSURE PAPER SE
SCAN OUR MODE RESOLUT
The special function
screen will appear.
Press the [OK] key.
CARD SHOT
3
SIZE(mm)
GHI
X:
Y:
100
100
BACK
OK
SPECIAL MODES
MARGIN SHIFT
ERASE
PQRS
DUAL PAGE COPY
[OK]:ADJUST
PY
Any number from 25 mm to 210 mm (1" to
8-1/2") can be entered for the width, and any
number from 25 mm to 210 mm (1" to
8-1/2") can be entered for the length.
Note
The special modes
screen will appear.
Select "CARD SHOT" with the [ ] or
[ ] key.
4
Press the [OK] key.
7
PQ
SPECIAL MODES
You will return to the base
screen.
2in1/4in1
XY ZOOM
OK
ED COPY
LEX SCAN
LEX SCAN
CARD SHOT
ACC
[OK]:CHANGE
56
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
Press the [START] key ( ).
8
MNO
The front side of the card is
scanned.
WXYZ
_
@.-
AD-END
Turn the original over on the
document glass.
9
Press the [START] key ( ).
10
Copying will start after both
sides of the original have been
scanned.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
ID CARD COPY
You can copy the front and back sides of ID card onto a page through this function, which can be used as margin
shift function, too. The specified patterns of ID card copy are shown as follows.
A5-A3 SIZE (Factory default setting)
A4 SIZE
Front
Centre Line
Back
• Select the layout patterns as explained in "ID CARD SETTING" of SYSTEM SETTINGS (p.121) first, then follow
the steps below to perform the copy.
• ID card copy feature cannot be used in combination with interrupt copy, two-sided copy, dual page copy,
XY-zoom, margin shift, edge + centre erase, 2 in 1/4 in 1, sort/group and rotation copy functions.
• The following paper sizes can be used: A5, A5R, A4, A4R, B4, B5, B5R, A3 (5-1/2" x 8-1/2", 5-1/2" x 8-1/2"R,
8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17"). (A5, A5R (5-1/2" x 8-1/2", 5-1/2" x 8-1/2"R) can only be used
in bypass tray.)
Note
3
• When using A4 SIZE, the image may cut off even if using standard paper size.
• In ID card copy mode, scan area and scan number (1 page) cannot be changed. Scan area is: X: 54 + 5 mm
(1/4") (margin), Y: 86 + 10 mm (1/2") (top margin 5 mm (1/4") and bottom margin 5 mm (1/4")).
• Auto paper selection and auto tray switch are invalid in ID card copy mode. Please select paper and tray
manually.
• Only making a single copy is available (Number of copies cannot be set.).
Place the ID card on the upper left
corner of the document glass.
Select "ID CARD COPY" with the [ ]
or [ ] key.
1
2
3
PQ
SPECIAL FUNCTION
ID CARD COPY
SPECIAL MODES
ED COPY
LEX SCAN
LEX SCAN
ORIG. SIZE ENTER
ACC
PAPER SIZE SET
Press the [SPECIAL FUNCTION] key.
Press the [OK] key.
4
ON LINE
DATA
SPECIAL FUNCTION
ID CARD COPY
SPECIAL
FUNCTION
OK
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
LINE
DATA
COPY EXPOSURE PAPER SE
SCAN COLOUR MODE RESOLUT
The special function
screen will appear.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
COPY FUNCTIONS
Press the [START] key ( ).
5
MNO
WXYZ
_
@.-
AD-END
Scanning of one side begins.
• Press the [READ-END] key to print only one side.
Turn the ID card to the other side, and
press the [START] key ( ). When
scan finished, Copy will begin.
6
To cancel ID card copy, press the [CA] key.
Note
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
PRINTER FUNCTIONS
4
This chapter explains how to use the printer functions.
• Print jobs received while the machine is copying or scanning will be stored in memory. When the copy job is
finished, the print jobs will begin printing.
• Printing is not possible when the front or side cover is opened for machine maintenance, or when a misfeed
occurs or the machine runs out of paper or toner, or when the drum cartridge reaches its replacement time.
• If an original misfeed occurs in the SPF/RSPF, printing will not be possible until the misfed original is removed
and the SPF/RSPF is restored to a usable state.
Note
BASIC PRINTING
The following example explains how to print a document from WordPad.
Before printing, make sure that the correct size of paper for your document has been loaded in the machine.
Make sure that the ONLINE indicator
on the operation panel is lit.
Start WordPad and open the
document that you wish to print.
1
2
3
If the ONLINE indicator is not on, press the [PRINT]
key to switch to printer mode and then use the [ ] key
to select "ONLINE".
Select "Print" from the application's
"File" menu.
COPY
Ready to print.
The "Print" dialog box will appear.
ON LINE
DATA
PRINT
ONLINE
OFFLINE
SCAN
The status of the printer function is indicated by the
ONLINE and DATA indicators above the [PRINT] key.
ONLINE indicator
DATA indicator
The machine is
online.
There is print data in
memory that has not
Lit
Printing is possible. been printed yet.
Printing is in
A print job is being
progress or data is
canceled.
Blinking
being received.
The machine is
offline.
Printing is not
possible.
There is no print
data in memory
and print data is
not being received.
Off
60
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINTER FUNCTIONS
Make sure that "SHARP MX-xxxx" is
selected as the printer.
,
4
If you need to change any print settings, click the
"Preferences" button to open the printer driver
setup screen.
The printer driver setup screen will appear.
Click the "Print" button.
5
Printing begins. When printing begins, the Print
Status Window automatically opens.
When the job separator tray is
installed
Note
The output tray can be selected when
selecting print settings at the time of
printing. To change the tray selection, select
the desired tray in "Output" in the "Paper"
tab of the printer driver setup screen.
Windows 2000 does not have the "Preferences"
button in this dialog box. Select settings as
needed on each of the tabs in the setup screen
and click the "OK" button.
IF THE TRAY RUNS OUT OF PAPER DURING
PRINTING
Add paper to the tray that ran out or to the bypass tray. If you add paper to the bypass tray, press the [PRINT] key on
the machine to switch to printer mode and select "BYPASS-TRAY". Printing will resume. Note that if the "AUTO
TRAY SWITCHING" setting is selected in the "PAPER SIZE SET" (accessed by pressing the [SPECIAL
FUNCTION] key) and there is the same size of paper in another tray, the machine will automatically switch to the
other tray and continue printing.
PAUSING A PRINT JOB
To pause a print job, press the [PRINT] key on the machine to switch to printer mode and then select "OFFLINE"
with the [ ] key. The machine pauses the print job and then goes offline.
• To cancel a print job, press the [C] key ( ).
• To resume printing, select "ONLINE" with the [ ] key.
HOW "BYPASS TRAY" AND "BYPASS MANUAL"
DIFFER IN THE "PAPER SOURCE" SETTINGS
There are two bypass tray settings in "Paper Source" in the "Paper" tab of the printer driver setup screen:
• When "Bypass Tray" is selected, the print job is automatically printed on the paper in the bypass tray.
• When "Bypass Manual" is selected, the print job is not printed until paper is inserted into the bypass tray. If paper
is already in the bypass tray, remove the paper and then re-insert it to begin printing.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINTER FUNCTIONS
OPENING THE PRINTER DRIVER FROM THE "Start" BUTTON
You can open the printer driver and change the printer driver settings from the Windows "Start" button. Settings
adjusted in this way will be the initial settings when you print from an application. (If you change the settings from the
printer driver setup screen at the time of printing, the settings will revert to the initial settings when you quit the
application.)
Click the "Start" button and select
"Control Panel" and then select
"Printer".
1
• In Windows 7, click the "Start" button, and then
click "Devices and Printers".
• In Windows XP, click the "start" button, and
then click "Printers and Faxes".
• In Windows 2000, click the "Start" button and
point to "Settings", and then select "Printers".
•
In Windows XP, if "Printers and Faxes" does
Note
not appear in the "start" menu, select "Control
Panel", select "Printers and Other Hardware",
and then select "Printers and Faxes".
Click the "SHARP MX-XXXX" printer
driver icon.
2
3
Select "Properties" from the
"Organize" menu.
4
• In Windows 7, right-click the "SHARP
MX-XXXX" printer driver icon, and then click
"Printer properties".
• In Windows XP/2000, select "Properties" from
the "File" menu.
Click the "Printing Preferences"
button in the "General" tab.
4
In Windows 7, click the "Preferences" button in
the "General" tab.
The printer driver setup screen will appear.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINTER DRIVER SETTING
SCREEN
Some restrictions exist on the combinations of settings that can be selected in the printer driver setup screen. When
a restriction is in effect, an information icon (
explanation of the restriction.
) will appear next to the setting. Click the icon to view an
1
2
3
4
6
8
7
9
10
The settings and the image of the machine will vary depending on the model.
Note
1
2
7
Tab
"OK" button
Click this button to save your settings and exit the
dialog box.
The settings are grouped on tabs. Click on a tab to
bring it to the front.
8
9
Checkbox
"Cancel" button
Click this button to exit the dialog box without
making any changes to the settings.
Click on a checkbox to activate or deactivate a
function.
3
4
Print setting image
This shows the effect of the selected print settings.
Drop-down list
"Apply" button
Click to save your settings without closing the
dialog box.
10
Allows you to make a selection from a list of
choices.
"Help" button
Click this button to display the help file for the
printer driver.
5
Image of paper trays
The tray selected in "Paper Selection" in the
"Paper" tab appears in blue. You can also click on
a tray to select it.
6
Check button
Allows you to select one item from a list of options.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINTER FUNCTIONS
PRINTING MULTIPLE PAGES ON ONE PAGE
This function can be used to reduce the print image and print multiple pages on a single sheet of paper.
This is convenient when you want to print multiple images such as photos on a single sheet of paper, and when you
want to conserve paper. This function can also be used in combination with two-sided printing for maximum
conservation of paper.
The following print results will be obtained, depending on the order selected.
The "N-Up Printing" setting is not available when "Fit To Paper Size" is selected.
Note
For example, when "2-Up", "4-Up" or "6-Up" is selected, the result will be as follows depending on the selected
order.
N-Up
Left to Right
Right to Left
4
[2-Up]
N-Up
Right, and Down
Down, and Right
Left, and Down
Down, and Left
[4-Up]
N-Up
Right, and Down
Down, and Right
Left, and Down
Down, and Left
[6-Up]
If you select the "Border" checkbox, borderlines will be printed around each page.
The order can be viewed in the print image in the printer driver setup screen.
Note
64
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINTER FUNCTIONS
FITTING THE PRINTED IMAGE TO THE PAPER
(Fit To Paper Size)
The printer driver can adjust the size of the printed image to match the size of the paper loaded in the machine.
Follow the steps shown below to use this function. The explanation below assumes that you intend to print an A3 or
Ledger size document on A4 or Letter size paper.
Click the "Paper" tab in the printer
driver setup screen.
Select the actual size of paper to be
used for printing (A4 or Letter).
The size of the printed image will be
automatically adjusted to match the paper loaded
in the machine.
1
2
4
Select the original size (A3 or Ledger)
of the print image in "Paper Size".
Paper Size: A3 or Ledger
Fit To Paper Size: A4 or Letter
Check the "Fit To Paper Size" button.
3
A4 or Letter size
paper
(Fit To Paper
Size)
A3 or Ledger
size document
(Paper Size)
ROTATING THE PRINT IMAGE 180 DEGREES
(Rotate 180 degrees)
The feature rotates the image 180 degrees so that it can be printed correctly on paper that can only be loaded in one
orientation (such as envelopes).
A B C D
ABCD
Click the "Main" tab in the printer
driver setup screen.
Check the "Rotate 180 degrees" box.
1
2
65
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINTER FUNCTIONS
ENLARGING/REDUCING THE PRINT IMAGE (Zoom)
This function is used to enlarge or reduce the image to a selected percentage. This allows you to enlarge a small
image or add margins to the paper by slightly reducing an image.
The "Zoom" setting is not available when "N-Up Printing" is selected.
Note
Click the "Paper" tab in the printer
driver setup screen.
Select the zoom ratio.
1
2
3
Directly enter a number or
click the button to change
the ratio in increments of 1%.
Select "Zoom" and click the
"Settings" button.
The actual paper size to be
used for printing can be
selected from the pop-up
menu.
4
PRINTING FAINT TEXT AND LINES IN BLACK
(Text To Black/Vector To Black)
When printing a colour image, colour text and lines that are faint can be printed in black. (Raster data such as bitmap
images cannot be adjusted.) This allows you to bring out colour text and lines that are faint and difficult to see.
ABCD
ABCD
Click the "Advanced" tab in the printer
driver setup screen.
Check the "Text To Black" box and/or
the "Vector To Black" box.
1
2
• "Text To Black" can be
selected to print all text
other than white text in
black.
• "Vector To Black" can be
selected to print all vector
graphics other than white
lines and areas in black.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINTER FUNCTIONS
ADJUSTING THE BRIGHTNESS AND CONTRAST OF
THE IMAGE (Image Adjustment)
The brightness and contrast can be adjusted in the print settings when printing a photo or other image. These
settings can be used for simple corrections when you do not have image editing software installed on your
computer.
Click the "Advanced" tab in the printer
driver setup screen.
Adjust the image settings.
1
2
3
To adjust a
setting, drag the
slide bar
click the
Click the "Image Adjustment" button.
or
or
button.
PRINTING A WATERMARK
You can print a watermark such as "CONFIDENTIAL" on your document. To print a watermark, open the printer
driver setup screen, click the [Watermarks] tab, and follow the steps below.
How to Print a Watermark
From the "Watermark" drop-down list, select the watermark that you wish to print (for example "CONFIDENTIAL"),
and start printing.
Print sample
You can enter text to create your own custom watermark. For details on watermark settings, view printer driver Help.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
PRINTER FUNCTIONS
TWO-SIDED PRINTING
The machine can print on both sides of the paper. This function is useful for many purposes, and is particularly
convenient when you want to create a simple pamphlet. Two-sided printing also helps conserve paper.
When using two-sided printing, select a source other than "Bypass Tray" for the "Paper Source" in the "Paper" tab.
Note
Paper orientation
Printing result
2-Sided (Book)
2-Sided (Tablet)
Vertical
2-Sided (Book)
2-Sided (Tablet)
4
Horizontal
The pages are printed so that they can be The pages are printed so that they can be
bound at the side.
bound at the top.
Click the "Main" tab in the printer
driver setup screen.
Select "2-Sided(Book)" or
"2-Sided(Tablet)".
1
2
68
Download from Www.Somanuals.com. All Manuals Search And Download.
SAVING FREQUENTLY USED PRINT
SETTINGS
Settings configured on each of the tabs at the time of printing can be saved as user settings. Saving frequently used
settings or complex colour settings under an assigned name makes it easy to select those settings the next time you
need to use them.
SAVING SETTINGS AT THE TIME OF PRINTING
(User Settings)
Settings can be saved from any tab of the printer driver properties window. Settings configured on each tab are
listed at the time of saving, allowing you to check the settings as you save them.
Configure print settings on each tab
and click the "Save" button on any
tab.
After checking the displayed settings,
enter a name for the settings
(maximum of 20 characters).
1
2
3
• Up to 30 sets of user settings can be saved.
Note
• A watermark that you created cannot be
saved in user settings.
Click the "OK" button.
Using saved settings
Select the user settings that you wish to use on any tab.
Deleting saved settings
Select the user settings that you want to delete in "Using saved settings" (above), and click the "Delete" button.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
OUTLINE OF THE PRINT STATUS
WINDOW
When printing begins, the Print Status Window automatically opens.
The Print Status Window is a utility that monitors the machine and shows the name of the document being printed
and any error messages that occur.
1
2
3
4
6
7
4
1
Status window
Provides information on the current status of the
3
Tab
Click a tab to bring it to the front. The "Options" tab
allows you to select display options for the Print
Status Window.
printer.
Status icon
2
4
5
6
7
The status icons appear to alert you to printer
errors. Nothing appears when printing is taking
place normally.
The icons are explained below. Follow the
instructions in the status window to solve the
problem.
Document Name
Shows the name of the document currently being
printed.
"Cancel Job" button
Printing can be cancelled by clicking this button
before the machine receives the job.
"Help" button
Click this button to display the help file for the Print
Status Window.
Icon
Print Status
An error has occurred that requires
immediate attention.
"Close" button
Click this button to close the Print Status Window.
An error has occurred that requires
attention soon.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
SCANNER FUNCTIONS
5
This chapter explains how to use the scanner functions.
• Scan jobs received while the machine is copying or printing will be stored in memory. When the copy job is
finished, the scan jobs will begin.
• Scanning is not possible when the front or side cover is opened for machine maintenance, or when a misfeed
occurs or the machine runs out of paper or toner, or when the drum cartridge reaches its replacement time.
• If an original misfeed occurs in the SPF/RSPF, scanning will not be possible until the misfed original is removed
and the SPF/RSPF is restored to a usable state.
Note
SCANNING OVERVIEW
The flow chart shown below provides an overview of scanning.
1
Scanning from the "Scanner
and Camera Wizard"
(Windows XP)
Scanning from a
Scanning from the machine*
2
TWAIN* -compliant or
3
WIA* -compliant application
Place the original in the scanning position
Start up the "Scanner
and Camera Wizard"
from "Control Panel" in
your computer.
Change the machine to
scanner mode and select the
scan menu. (SC1: to SC6:)
Start up a TWAIN-compliant
or WIA-compliant
application, and select the
machine's scanner driver.
Set the scan preferences
(only if the preferences are set
to appear)
Set the scan preferences
Scanning
Scanning
Scanning
*1 To scan using the machine's operation panel, you must first install Button Manager and establish the appropriate settings
*2 TWAIN is an international interface standard for scanners and other image acquisition devices. By installing a TWAIN
driver on your computer, you can scan and work with images using a variety of TWAIN-compliant applications.
3
* WIA (Windows Imaging Acquisition) is a Windows function that allows a scanner, digital camera or other imaging device to
communicate with an image processing application. The WIA driver for this machine can only be used in Windows XP/Vista/7.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNER FUNCTIONS
SCANNING USING THE KEYS ON
THE MACHINE
The procedure for scanning using the [SCAN] key is explained in the following. When scanning is performed by this method,
the previously specified application will automatically start and the scanned image will be acquired into the application.
• Scanner mode cannot be used in the following situations:
• A problem has occurred in the machine such as a paper misfeed or an open cover.
• The system settings are being used.
Note
• The tray paper size is being set.
• During copying or printing
• During scanning of an original for a fax transmission (when the fax option is installed)
• If the machine is in copy mode, press the [SCAN] key to switch to scanner mode and clear the previously set
copy settings.
Place the original(s) that you wish to scan
on the document glass or in the SPF/RSPF.
For information on how to place the original, see
Press the [OK] key.
1
2
4
GHI
BACK
OK
Ready to scan.
SC2:
PQRS
Press the [SCAN] key.
PY
The selected destination
appears.
ON LINE
DATA
PRINT
SCAN
FAX
DESTINATION SELECT
SC1:
SC2:
SC3:
SC4:
Press the [START] key.
5
LINE
DATA
MNO
Scanning begins.
5
WXYZ
The [SCAN] key indicator lights up to indicate that the
machine is in scanner mode and the destination
selection screen appears in the display. A name can
be entered in Button Manager for each of the
destinations "SC1:" to "SC6:", which will appear in the
format "SC1:XXXXX".
_
@.-
AD-END
• The [COPY] key, [PRINT] key, or [FAX]
key can be pressed in scanner mode to
switch to the corresponding mode.
• For restrictions on using copy, printer, or
fax mode while in scanner mode, or using
scanner mode while in copy, printer, or fax
Note
Use the [ ] or [ ] key to select the
desired scan destination.
3
PQ
ED COPY
LEX SCAN
LEX SCAN
ACC
The following applications have been set at the factory
for each of the scan destinations 1 to 6.
If you wish to change a setting, see "BUTTON
Scan Destination
SC1:
Application that starts
Sharpdesk
Email
SC2:
SC3:
SC4:
SC5:
SC6:
FAX
OCR
Microsoft Word
Filing
72
Download from Www.Somanuals.com. All Manuals Search And Download.
BUTTON MANAGER
Button Manager is a software utility that allows the scanner function to be used by means of the [SCAN] key on the
machine. The Button Manager software allows you to assign a destination application and scan settings to each of
the six destinations on the machine.
To scan using the machine's operation panel, settings must be configured in the Control Panel after Button Manager
is installed. To install Button Manager and configure settings, see "SETTING UP BUTTON MANAGER" (p.13)
.
Setup window
To view Help for a setting, click the
button in the upper right-hand corner of the Button Manager setup window
(Scan Button Destination Settings screen) and then click the setting.
1
2
3
Full Colour
4
5
6
7
8
1
5
6
Tab
"OK" button
Click to save your settings and exit the dialog box.
Click to set scan menu options. Each tab contains
scan settings for the scan menu.
"Application Selection" area
Select the start-up application here.
"Show TWAIN setting screen when scanning"
Checkbox
You can select whether or not the TWAIN screen is
shown. When the checkbox is selected, the TWAIN
screen appears when scanning is executed to let
you adjust the scanning conditions.
"Cancel" button
Click this button to exit the dialog box without
making any changes to the settings.
"Apply" button
Click to save your settings without closing the
dialog box.
"Help" button
Click this button to display the help file for Button
Manager.
2
3
7
8
4
"Scan Setup" area
Set the scan conditions.
Some applications may limit your choice of
settings.
Note
"Menu Name" is not used on this machine.
Note
The scan settings for each of the six destinations can be changed in Button Manager.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNER FUNCTIONS
BUTTON MANAGER SETTINGS
Once installed, Button Manager normally runs in the background in the Windows operating system. If you need to
change Button Manager settings, follow the steps below.
For details on Button Manager settings, see Button Manager Help.
Right-click the Button Manager icon
Set up the "Colour Mode", "Edge" and
other scan settings in the "Scan
Setup" area.
• If you placed a two-sided original in the RSPF,
select "Duplex-Book" or "Duplex-Tablet" as
appropriate for the position of the binding on
the original.
1
4
(
) on the task bar, and select
"Settings" from the pop-up menu.
The setting screen of
Button Manager will open.
• The name of the tab can be changed. Click the
"Menu Name" button and enter a new name.
After entering a name, click the "Apply" button
or "OK" button. This also changes the scan
destination name that appears on the machine.
(Example: SC1: XXXXX)
If the Button Manager icon does not appear
Note
on the task bar, click the "Start" button, select
"All Programs" ("Programs" in Windows
2000), select "Sharp Button Manager AA",
and then click "Button Manager" to start
Button Manager.
• If you selected "Duplex-Book" or
Note
"Duplex-Tablet" from the "Scanning Side"
menu, select "Right edge is fed first" or
"Top edge is fed first" for the orientation of
the original.
Click the tab of the scan menu that
you want to set up.
2
3
• For original sizes for which two-sided
• Some settings cannot be selected in
some applications.
• When "Show TWAIN setting screen when
scanning" is selected, only "Menu name"
can be selected.
Select the start-up application in the
"Application Selection" area.
5
When the "Show TWAIN setting screen when
Note
scanning" checkbox is selected, the scan
setting screen appears when scanning is
executed to let you adjust the scanning
conditions.
Click the "OK" button.
5
This completes the settings.
Button Manager scan menu (factory
default)
Display/Button
Manager menu
Application that starts
SC1:
Sharpdesk
Email
SC2:
SC3:
FAX
SC4:
OCR
SC5:
Microsoft Word
Filing
SC6:
The start-up application must be installed
before using.
Note
74
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNING FROM YOUR
COMPUTER
The machine supports the TWAIN standard, making it possible to scan from TWAIN-compliant applications. The
machine also supports WIA (Windows Image Acquisition), making it possible to scan from WIA-compliant
applications and the "Scanner and Camera Wizard" in Windows XP. For information on TWAIN and WIA settings,
see the help file for the scanner driver or Windows Help.
SCANNING FROM A TWAIN-COMPLIANT
APPLICATION
The SHARP scanner driver is compatible with the TWAIN standard, allowing it to be used with a variety of
TWAIN-compliant applications.
Place the original(s) that you wish to
scan on the document glass/SPF/
RSPF.
In the "Scanning Source" menu,
select the location where you placed
the original in Step 1.
1
5
For information on setting an original for
scanning, refer to "SCANNING USING THE
After starting TWAIN-compliant
application, click the "File" menu and
select a menu to scan.
2
• If you placed a one-sided original in the
SPF/RSPF, select "SPF (Simplex)".
The method for accessing the menu to select
Note
Only when using the RSPF:
the scanner depends upon the application.
For more information, refer to the manual or
the help file of your application.
• If you placed a two-sided original in the RSPF,
select "SPF (Duplex-Book)" or "SPF
(Duplex-Tablet)" according to the binding
position of the original.
Select "SHARP MFP TWAIN AA", and
click the "Select" button.
3
If you selected "SPF (Duplex-Book)" or "SPF
Note
(Duplex-Tablet)" in the "Scanning Source"
menu, select whether the orientation of the
placed original is "Right edge is fed first" or
"Top edge is fed first".
• If you are using Windows XP/Vista/7, you
can also select "WIA-SHARP MX-XXXX" to
scan using the WIA driver.
Note
• Depending on your system, "SHARP MFP
TWAIN AA 1.0 (32-32)" and "WIA-SHARP
MX-XXXX 1.0 (32-32)" may appear in the
above "Select Source" screen.
Click the "Preview" button.
6
The preview image will appear.
• If the angle of the image is not correct, reset
the original, and click the "Preview" button
again.
Note
Select the menu to acquire an image
from the application’s "File" menu.
The scanner driver setup screen will appear.
• If the preview image is not oriented
correctly, click the "Rotate" button in the
preview screen. This rotates the preview
image 90 degrees clockwise, allowing you
to correct the orientation without resetting
• If you set multiple pages in the SPF/RSPF,
the machine previews only the top page of
the originals, and then sends it to the
original exit area. Return the previewed
original to the SPF/RSPF before starting
the scanning job.
4
75
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNER FUNCTIONS
Specify the scanning area and set the
scan preferences.
7
For information on specifying the scan area and
setting the scan preferences, see scanner driver
Help.
• Scanning a large area at high resolution
results in a large quantity of data and a
prolonged scanning time. It is
Caution
recommended that you set appropriate
scanning preferences for the type of original
being scanned, i.e., Web page (monitor),
Photo, FAX, or OCR.
• The scan resolution will vary depending on
the scanning area and how much memory
in the machine is free. For example, if a
letter or A4 original is scanned in full color
at 300 dpi with only the standard memory
installed, the machine will scan the original
in full color at 150 dpi and the scanner
driver will enhance the resolution to 300
dpi.
• To scan a ledger or A3 original in full color
at 600 dpi without using enhancement, the
256 MB memory option is required.
When you are ready to begin
scanning, click the "Scan" button.
8
Scanning begins and the image is acquired into
the application that you are using.
In the application, assign a file name and save
the file.
5
To cancel a scanning job after the "Scan"
Note
button has been clicked, press the [Esc] key
on your keyboard or the [C] key ( ) or [CA]
key ( ) on the operation panel.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNER FUNCTIONS
Scanner driver settings
The scanner driver setup screen consists of the "Set-up screen", which lets you select scan settings, and the
"Preview screen", which shows the scanned image. For details on the scan settings, click the "Help" button in the
preview screen to display Help.
Set-up screen
1
2
3
4
5
6
7
1
4
"Scanning Position" menu
"Zoom Preview" checkbox
("Scanning Source" in some regions)
When this is selected, the selected part of the
preview image will be enlarged when the "Preview"
button is clicked.
Select the location where the original is placed.
Selections are "Platen" (document glass), "SPF
(Simplex)", "SPF (Duplex-Book)" or "SPF
(Duplex-Tablet)".
To return to the regular view, remove the checkmark.
[Zoom Preview] cannot be used when [SPF]
is selected in the "Scanning Position" menu.
Note
On machines without an SPF/RSPF, this
setting is fixed at "Platen".
Note
5
"Preview" button
Previews the document.
2
"Scanning Mode" menu
Select "Preset" or "Custom Settings" ("Standard"
or "Professional" in some regions) for the scanning
mode.
If [Preview] is canceled by immediately
pressing the [Esc] key on your keyboard, or
Note
the [C] key ( ) or [CA] key ( ) on the
machine, nothing will appear in the preview
screen.
The "Preset (or Standard)" screen lets you select
the original type as well as monitor, photo, fax, or
OCR according to the purpose of scanning.
If you wish to change the default settings for these
four buttons, or select custom settings such as the
image type and resolution before scanning, switch
to the "Custom Settings (or Professional)" screen.
For details on the settings, click the "Help" button
in the preview screen to display Help.
6
"Scan" button
("Scanning" in some regions)
Click to scan an original using the selected
settings. Before clicking the "Scan" button, make
sure the settings are correct.
3
"Image Area" menu
To cancel a scanning job after the "Scan"
button is clicked, press the [Esc] key on your
keyboard or the [C] key ( ) or [CA] key
Note
Set the scanning area. To scan the original size
detected by the machine, select "Auto". The
scanning area can also be specified as desired in
the preview window.
(
) on the machine.
7
"Close" button
Click to close the scanner driver setup screen.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNER FUNCTIONS
Preview screen
1
3
4
5
1
4
Preview screen
"Auto Scan Area Judgement" button
Click the "Preview" button in the Set-up screen to
display the scanned image. You can specify the
scanning area by dragging the mouse inside the
window. The inside of the frame that is created
when you drag the mouse will be the scanning
area. To cancel a specified scanning area and
clear the frame, click anywhere outside the frame.
Click when the preview screen is displayed to
automatically set the scanning area to the entire
preview image.
Click the "Auto Scan Area
Judgement" button to
automatically set the
scanning area to the entire
preview image.
5
2
3
"Rotate" button
Click to rotate the preview image 90 degrees
clockwise. This allows the orientation to be
corrected without resetting the original. Upon
scanning, the image file is created in the
orientation shown in the preview screen.
Preview image
Preview screen
"Image Size" button
5
"Help" button
Click to display the help file for the scanner driver.
Click to open a dialog box that allows you to
specify the scanning area by entering numbers.
Pixels, mm, or inches can be selected for the units
of the numbers. By initially specifying a scanning
area, numbers can be entered to change that area
relative to the top left corner as a fixed origin.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNER FUNCTIONS
SCANNING FROM A WIA-COMPLIANT APPLICATION
(Windows XP/Vista/7)
If you are using Windows XP/Vista/7, you can use the WIA driver to scan from Paint and other WIA-compliant
applications. The procedure for scanning using Paint is explained in the following.
Place the original that you wish to
scan on the document glass/SPF/
RSPF.
For information on setting an original for
scanning, refer to "SCANNING USING THE
Select the paper source and picture
3
type, and click the "Preview" button.
1
The preview image will
appear.
If you placed the original
on the document glass,
select "Flatbed" for the
"Paper source".
If you placed the original in
the SPF/RSPF, select
"Document Feeder" for the
"Paper source" and specify
the original size in "Page
size".
Start Paint and then click the "File"
menu and select "From Scanner or
Camera".
2
The scan screen of the
WIA driver will appear.
• If you select "Document Feeder" for the
Note
"Paper source" and click the "Preview"
button, the top original in the SPF/RSPF is
previewed. The previewed original is sent to
the original exit area, so you will need to
return it to the SPF/RSPF before starting
the scanning job.
If you have WIA drivers for other devices
Note
• In Windows XP, you can view Help for a
installed in your computer, the "Select Device"
screen will open. Select "SHARP MX-XXXX"
and click the "OK" button.
setting. Click the
button in the upper
right-hand corner of the window and then
click the setting.
Click the "Scan" button.
4
Scanning begins and the image is acquired into
Paint.
Use "Save" in your application to specify a file
name and folder for the scanned image, and save
the image.
To cancel a scanning job after clicking the "Scan"
button, click the "Cancel" button.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNER FUNCTIONS
SCANNING FROM THE "Scanner and Camera Wizard"
(Windows XP)
The procedure for scanning with the "Scanner and Camera Wizard" in Windows XP is explained here. The "Scanner
and Camera Wizard" lets you scan an image without using a WIA-compliant application.
Place the original that you wish to
scan on the document glass/SPF/
RSPF.
For information on setting an original for
scanning, refer to "SCANNING USING THE
Select the "Picture type" and click the
5
"Next" button.
1
• If you placed the original on the document
glass, select "Flatbed" for the "Paper source".
• If you placed the original in the SPF/RSPF,
select "Document Feeder" for the "Paper
source" and specify the original size in "Page
size".
Click the "start" button, click "Control
Panel", click "Printers and Other
Hardware", and then click "Scanners
and Cameras".
2
3
• You can click the "Preview" button to display
the preview image.
Click the "SHARP MX-XXXX" icon and
then click "Get pictures" in "Imaging
Tasks".
The "Scanner and
Camera Wizard" will
appear.
• If an SPF/RSPF is not installed on your
machine, the "Paper source" menu will not
appear.
Note
• If you select "Document Feeder" for the
"Paper source" and click the "Preview"
button, the top original in the SPF/RSPF is
previewed. The previewed original is sent to
the original exit area, so you will need to
return it to the SPF/RSPF before starting
the scanning job.
5
Click the "Next" button.
4
• To adjust the resolution, picture type,
brightness and contrast settings, click the
"Custom settings" button.
Specify a group name, format and
folder for saving the image, and
then click the "Next" button.
6
JPG, BMP, TIF or PNG
can be selected for the
format. To begin
scanning, click the "Next"
button.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
SCANNER FUNCTIONS
When scanning ends, the following
7
screen will appear. Select the next
task that you wish to perform, and
then click the "Next" button.
If you are ready to end
the session, click
"Nothing. I’m finished
working with these
pictures".
Click the "Finish" button.
8
The "Scanner and
Camera Wizard" closes
and the scanned image is
saved in the specified
folder.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
TROUBLESHOOTING
6
This chapter describes troubleshooting and misfeed removal.
TROUBLESHOOTING
If you experience difficulty using the machine, check the following troubleshooting guide before calling for service.
Many problems can be easily resolved by the user. If you are unable to solve the problem using the troubleshooting
guide, turn off the power switch and unplug the machine, and contact your authorised service representative.
The machine does not operate. ................................................................................................................. 83
Copies are too dark or too light.................................................................................................................. 83
Blank copies............................................................................................................................................... 83
Part of the image is cut off or there is too much blank space. ................................................................... 83
Wrinkles appear in the paper or the image disappears in places. ............................................................. 83
Paper misfeed............................................................................................................................................ 84
original. ....................................................................................................................................................... 85
Copies are smudged or dirty...................................................................................................................... 85
White or black lines appear on copies. ...................................................................................................... 85
Paper size for a paper tray cannot be set.................................................................................................. 85
A copy job stops before it is finished.......................................................................................................... 85
The display turns off................................................................................................................................... 86
Lighting fixture flickers. .............................................................................................................................. 86
The machine does not print. (ONLINE indicator does not blink.)............................................................... 87
The machine does not print. (DATA indicator does not blink.)................................................................... 87
The machine does not print. (ONLINE indicator was blinking.) ................................................................. 87
A Notice Page (NP-001) has been printed, but the print data has not been printed completely................ 88
Printing is slow........................................................................................................................................... 88
The printed image is light and uneven....................................................................................................... 88
The printed image is dirty........................................................................................................................... 88
The printed image is skewed or it runs off the paper................................................................................. 88
The printed image is darker or lighter than expected................................................................................. 89
Poor scanning quality................................................................................................................................. 89
Unable to scan the image. ......................................................................................................................... 90
Scanner transfer speed is slow.................................................................................................................. 90
MISFEED REMOVAL.................................................................................... 92
82
Download from Www.Somanuals.com. All Manuals Search And Download.
MACHINE/COPYING PROBLEMS
The following problems are related to the general operation of the machine and copying.
Problem
Cause and solution
Page
The machine is not plugged into a power outlet.
→ Plug the machine into a grounded outlet.
–
Power switch OFF.
→ Turn the power switch ON.
–
The machine is warming up.
→ The machine requires about 25 seconds to warm up after the
power switch is turned on. While the machine is warming up,
copy settings can be selected but copying is not possible. Wait
until "Ready to copy." appears.
The machine does not operate.
The front cover or the side cover is not completely closed.
→ Close the front cover or the side cover.
The machine is in auto power shut-off mode.
→ When auto power shut-off mode has activated, only the START
indicator blinks; all other indicators and the display are off. The
machine returns to normal operation when the [START] key is
pressed, when a print job or fax is received, or when scanning
from a computer is started.
* Except when print hold for the fax function is enabled.
An appropriate exposure for the original has not been
selected.
→ Select a suitable exposure mode with the [EXPOSURE] key. If
"TEXT" or "PHOTO" is selected, set an appropriate exposure
level with the [ ] or [ ] key.
→ If the copy is too light or too dark even though "AUTO" was
selected with the [EXPOSURE] key, adjust the automatic
exposure level.
Copies are too dark or too light.
The automatic exposure level is adjusted in "EXPOSURE
The original is not placed face up in the SPF/RSPF or face
down on the document glass.
→ Place the original face up in the SPF/RSPF or face down on the
document glass.
Blank copies.
The original was not placed in the correct position.
→ Place the original correctly.
An appropriate ratio was not used for the size of the
original and the size of the paper.
→ Press the [AUTO IMAGE] key to have the copy made using the
appropriate ratio for the original and paper.
Part of the image is cut off or there
is too much blank space.
The size of paper loaded in the tray was changed without
changing the tray's paper size setting.
→ Be sure to change the tray's paper size setting whenever you
change the size of paper loaded in the tray.
The paper is outside of the specified size and weight range.
→ Use copy paper within the specified range.
Paper curled or damp.
Wrinkles appear in the paper or
the image disappears in places.
→ Do not use curled or crimped paper. Replace with dry copy paper.
During periods when the machine is not used for a long time,
remove the paper from the tray and store it in a dark place in a
bag to prevent moisture absorption.
–
83
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Problem
Cause and solution
Page
Misfeed occurs.
The paper is outside of the specified size and weight
range.
→ Use copy paper within the specified range.
–
Paper curled or damp.
→ Do not use curled or crimped paper. Replace with dry copy paper.
During periods when the machine is not used for a long time,
remove the paper from the tray and store it in a dark place in a
bag to prevent moisture absorption.
Paper is not loaded properly.
→ Make sure the paper is properly installed.
Pieces of paper inside machine.
→ Remove all pieces of misfed paper.
Several sheets of paper stick together.
→ Fan the paper well before loading it.
Paper misfeed.
Too much paper is loaded in the tray.
→ If the stack of paper is higher than the indicator line on the tray,
remove some of the paper and reload so that the stack does not
exceed the line.
The guides on the bypass tray do not match the width of
the paper.
→ Adjust the guides to match the width of the paper.
The bypass tray extension is not pulled out.
→ When loading a large size of paper, pull out the extension.
The bypass paper feed roller is dirty.
→ Clean the roller.
A5 (5-1/2" x 8-1/2") paper is loaded in lower paper tray or
in the 250-sheet or 2 x 250-sheet paper feed unit.
→ A5 (5-1/2" x 8-1/2") size paper must be loaded in upper paper tray
or the bypass tray.
6
84
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Problem
Cause and solution
Page
Was the SPF/RSPF (or document cover) opened
completely when the original was placed on the document
glass?
→
Open the SPF/RSPF completely and then place the original on the
document glass. Close the SPF/RSPF (or document cover).
The original is curled or folded.
→ The original size cannot be correctly detected if the original is
curled or folded. Straighten the original.
–
The original has many solid black areas.
→ If the original includes solid black areas, the original size may not
be detected automatically. Press the [SPECIAL FUNCTION] key
and select "ORIG. SIZE ENTER" to specify the original size.
–
–
The original size is not
automatically selected or the copy
is not made on paper that matches
the size of the original.
The machine is directly exposed to sunlight.
→ Install in a location that is not exposed to sunlight.
The original is smaller than A5 (5-1/2" x 8-1/2") size.
→ If the original is smaller than A5 (5-1/2" x 8-1/2"), the size cannot
be detected. Follow the procedure in "USING THE BYPASS
TRAY TO COPY A SPECIAL SIZE ORIGINAL" to make the copy.
The original is not a standard size.
→ If the original is a small non-standard size, the size cannot be
detected. Manually select a size close to the original size, or
SPECIAL SIZE ORIGINAL" to make the copy.
The document glass or the underside of the document
cover/SPF/RSPF is dirty.
→ Clean regularly.
Copies are smudged or dirty.
Original smudged or blotchy.
→ Use a clean original.
–
The scanner glass for the SPF/RSPF is dirty.
→ Clean the long, narrow scanning glass.
–
White or black lines appear on
copies.
The transfer charger is dirty.
→ Clean the transfer charger.
Copying or printing is performed.
→ Set the paper size after copying or printing is complete.
The machine has stopped temporarily due to running out
of paper or a misfeed.
→ Load paper or remove the misfeed, and then set the paper size.
Paper size for a paper tray cannot
be set.
An interrupt copy job is in progress.
→ Set the paper size after the interrupt copy job is finished.
The display or the DATA indicator is blinking.
→ Data is being held in memory. Print the data in memory or clear it
from memory.
The paper output tray is full.
→ Long copy runs are automatically paused every 250 copies.
Remove the copies in the paper output tray and press the
A copy job stops before it is
finished.
[START] key (
) to resume copying.
The tray is out of paper.
→ Load paper.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Page
Problem
Cause and solution
Any other indicators turned off.
→ If other indicators are lit, the machine is in "Preheat mode". Press
any key on the operation panel to resume normal operation.
The display turns off.
START indicator blinks.
→ The machine is in auto power shut-off mode. Press the [START]
key (
) to resume normal operation.
The same power outlet being used is for the lighting
fixture and the machine.
→ Connect the machine to a power outlet which is not used for other
electric appliances.
Lighting fixture flickers.
–
6
86
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
PRINTING AND SCANNING PROBLEMS
In addition to this section, troubleshooting information can also be found in the README files for each of the
Problem
Cause and solution
Page
The machine is set to off-line mode.
→ If the ONLINE indicator is not on, press the [PRINT] key to switch
to printer mode and then use the [ ] key to select "ONLINE".
The machine is not correctly connected with your
computer.
→ Check both ends of the printer cable and make sure you have a
solid connection. Try a known good cable. For information on
–
Copy job is performed.
→ Wait until the copy job is complete.
Your machine is not selected correctly in the current
application for the print job.
→ When choosing "Print" from the "File" menu located in
applications, be sure you have selected "SHARP MX-XXXX"
(where XXXX is the model name of your machine) printer
displayed in the "Print" dialog box.
–
The machine does not print.
(ONLINE indicator does not blink.)
The printer driver has not been installed properly.
→
Follow these steps to check and see if the printer driver is installed.
1
Click the "Start" button, click "Control Panel", and then click
"Printer".
In Windows 7, click the "Start" button, and then click "Devices
and Printers".
–
In Windows XP, click the "start" button, and then click
"Printers and Faxes".
In Windows 2000, click the "Start" button, select "Settings"
and then click "Printers".
2
If the "SHARP MX-XXXX" printer driver icon is shown but you
still cannot print, the printer driver may not have been installed
correctly. In this case, delete the software and then reinstall it.
The machine is not correctly connected with your
computer.
→ Check both ends of the printer cable and make sure you have a
solid connection. For information on cables, see
The machine does not print.
(DATA indicator does not blink.)
The port setting is not correct.
→ Printing is not possible if the printer driver port setting is not
correct. Set the port correctly.
Printing is disabled.
→ If "CANCEL JOBS OF INVALID ACCOUNTS" is enabled in the
system settings, printing will not be possible. Consult the
administrator.
The tray size settings are not the same on the machine
and in the printer driver.
→ Make sure that the same tray paper size is set on the machine
and in the printer driver. To change the tray's paper size setting on
change it in the printer driver.
The machine does not print.
(ONLINE indicator was blinking.)
The specified size of paper has not been loaded.
→ Load the specified size of paper in the paper tray.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Page
Problem
Cause and solution
A print job containing more data than can be held in the
print memory is sent to the machine.
→ Disable the ROPM function on the "Configuration" tab of the
printer driver setup screen. If you need to use the ROPM function,
divide the pages of the print data into two or more print jobs.
→ The memory allocated to the printer function can be changed in
the system setting "MEM. FOR PRINTER".
A Notice Page (NP-001) has been
printed, but the print data has not
been printed completely.
Simultaneous use of two or more application software
programs.
Printing is slow.
–
–
→
Start printing after quitting all unused application software programs.
The paper is loaded so that printing takes place on the
back side of the paper.
→ Some paper types have a front and back side. If the paper is
loaded so that printing takes place on the back side, toner will not
adhere well to the paper and a good image will not be obtained.
The printed image is light and
uneven.
You are using paper that is outside the specified size and
weight range.
→ Use copy paper within the specified range.
Paper curled or damp.
→ Do not use curled or crimped paper. Replace with dry copy paper.
During periods when the machine is not used for a long time,
remove the paper from the tray and store it in a dark place in a
bag to prevent moisture absorption.
The printed image is dirty.
You did not set sufficient margins in the paper settings of
your application.
→ The top and bottom of the paper may be dirty if the margins are
set outside of the specified print quality area.
→ Set the margins in the software application within the specified
print quality area.
–
–
The paper loaded in the tray is not the same size as that
specified in the printer driver.
→ Check if the "Paper Size" options suit the size of the paper loaded
in the tray.
→ If the "Fit To Paper Size" setting is activated, make sure that the
paper size selected from the drop-down list is the same as the
size of the loaded paper.
6
The orientation of document setting is not correct.
→ Click the "Main" tab in the printer driver setup screen, and verify if
the "Image Orientation" option is set to your requirements.
–
Paper is not loaded properly.
→ Make sure the paper is properly loaded.
The printed image is skewed or it
runs off the paper.
You did not correctly specify the margins for the
application in use.
→ Check the layout of the document margins and the paper size
settings for the application you are using. Also check if the print
settings are specified correctly to suit the paper size.
–
The image orientation setting in the printer driver is not
correct.
→ Click the [Paper] tab in the printer driver setup screen and make
sure the "Image Orientation" setting is correct.
Paper is not loaded properly.
→ Make sure the paper is properly loaded.
–
The margins are not set correctly in the application.
→ Check the paper size and margin settings in the application. Also
make sure that the print settings are correct for the paper size.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Problem
Cause and solution
Page
The setting for the print density is not appropriate.
→ You can adjust the print density on the printer driver. Click the
"Advanced" tab in the printer driver setup screen, and click the
"Compatibility" button. Select the "Print Density Level" from
1 (light) to 5 (dark).
The printed image is darker or
lighter than expected.
–
The document glass or the underside of the document
cover/SPF/RSPF is dirty.
→ Clean regularly.
–
Original smudged or blotchy.
→ Use a clean original.
You have not specified a suitable resolution.
→ Make sure that the resolution setting in the scanner driver is
appropriate for the original.
–
You are scanning a large area (for example an entire A3
(11" x 17")) at high resolution.
→ If you attempt to scan a large area at high resolution and there is
insufficient memory in the machine to hold the scanned data,
scanning will take place at a lower resolution and the scanner
driver will enhance the data to make up for the lower resolution.
However, the quality of the enhanced image will not be as high as
if scanning took place at the higher resolution. Use a lower
resolution setting, or scan a smaller area.
–
–
You have not specified a suitable value for the "B/W
Threshold" setting.
→ If you are scanning with a TWAIN-compliant application, make
sure that a suitable value is specified for the "B/W Threshold"
setting. A larger threshold value makes your output darker, while
a small threshold value makes it lighter. To adjust the threshold
automatically, click the "Auto Threshold" button on the "Image"
tab of the "Professional" screen.
Poor scanning quality.
The brightness and contrast settings are not suitable.
→ If you are scanning with a TWAIN-compliant application and the
resulting image has unsuitable brightness or contrast (for
example it is too bright), click the "Auto Brightness/Contrast
Adjustment" button on the "Colour" tab of the "Professional"
screen. Click the "Brightness/Contrast" button to adjust the
brightness and the contrast while viewing the scanned output
image on the screen. If you are scanning with a WIA-compliant
application or the "Scanner and Camera Wizard", click "Adjust the
quality of the scanned picture" or the "Custom settings" button,
and adjust the brightness and contrast in the screen that appears.
–
The original is not placed face up in the SPF/RSPF or face
down on the document glass.
→ Place the original face up in the SPF/RSPF or face down on the
document glass.
The original was not placed in the correct position.
→ Place the original correctly.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Page
Problem
Cause and solution
If scanning is not possible, shut down your computer,
turn off the machine’s power switch, and unplug the
machine’s power cord. Next, start your computer, restore
power to the machine, and try scanning again. If scanning
is still not possible, check the following items.
–
Your application is not TWAIN/WIA compliant.
→ If your application is not TWAIN/WIA compliant, scanning will not
be possible. Make sure your application is TWAIN/WIA compliant.
–
–
You have not selected the scanner driver of the machine
in your application.
→ Make sure that the machine’s scanner driver is selected in your
TWAIN/WIA-compliant application.
Unable to scan the image.
You have not specified all scanning preferences
appropriately.
→ Scanning a large area at high resolution results in a large amount
of data and extended scanning times. The scanning preferences
should be set appropriately for type of original to be scanned, i.e.,
Text, Text/Graphics, Photograph.
–
There is not enough machine memory.
→ The scan resolution will vary depending on the scanning area and
how much memory in the machine is free.
–
Your computer does not meet the system requirements
for the USB 2.0 interface (Hi-Speed mode).
configure your system as required.
Scanner transfer speed is slow.
6
90
Download from Www.Somanuals.com. All Manuals Search And Download.
INDICATORS AND DISPLAY MESSAGES
If one of the following messages appears in the display, take prompt action as instructed by the message.
Message
Action
(Maintenance icon)
It is time for regular maintenance. Contact your authorised service
representative.
(Developer replacement required Developer is required. Contact your authorised service representative as
icon)
Maintenance required. Call for
service.
Call for service.
soon as possible.
Maintenance required soon. Contact your authorised service
representative.
–
Turn off the power and then turn it back on. If this does not clear the
message, write down the 2-digit main code and 2-digit sub-code
("
-
"), turn off the power, and promptly contact your authorised
service representative.
(Toner cartridge replacement
required icon)
The toner cartridge must be replaced soon.
Check the toner cartridge.
Check to see if the toner cartridge has been installed properly.
Remove paper from the output tray
and press [OK].
The number of sheets in the output tray (centre tray or top tray) has
reached the limit. Remove the paper.
Load <
> paper into tray < >. The paper size specified for the tray is different from the actual size.
Memory is full.
The memory became full while scanning the originals. Press the [START]
key ( ) to copy only the originals that have been scanned, or press the
[CA] key to cancel the job.
An optional memory board (MX-EB14) can be installed to increase the
original scanning capacity. Memory can be expanded to a maximum of 256
MB
(128 MB of expansion memory).
< >: Tray number
<
>: Size of paper that should be loaded
91
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
When a misfeed occurs during copying, the message "
Check the location and remove the misfeed.
Clear paper path." and the location of the misfeed will appear.
The paper may tear when you remove a misfeed. In this event, be sure to remove all torn pieces of paper from the
machine, taking care not to touch the photoconductive drum (the green part). Any scratches or damage to the
surface of the drum will cause dirty copies.
Note
(See below)
Misfeed locations in the optional
2 x 250-sheet paper feed unit
MISFEED IN THE SPF/RSPF
Remove the misfed original.
1
Section B
Open the SPF/RSPF and rotate the two release
rollers in the direction of the arrow to feed the
original out. Close the SPF/RSPF and then
remove the original.
Check sections A, B, and
C in the left shows the
illustration (see the next
page), and remove the
misfed original.
Roller
6
Section A
Open the feeding roller cover and remove the
misfed original from the document feeder tray.
Close the feeding roller cover.
Feeding roller cover
If a small original (A5 (5-1/2" x 8-1/2"), etc.) is
misfed, open the right side cover and remove
the original. Close the right side cover.
Right side cover
92
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Section C
Return the originals indicated by the
minus number in the display to the
document feeder tray and press the
[START] key ( ).
3
Remove the misfed original from the exit area.
Copying will resume from the originals that still
remained when the misfeed occurred.
If the misfed original cannot be easily removed
from the exit area, open the moveable part of the
document feeder tray and remove the original.
Open and close the SPF/RSPF to
make the misfeed location indicator
stop blinking.
2
You can also make the
misfeed indicator stop
blinking by opening and
closing the feeding roller
cover or the right side
cover.
MISFEED IN THE BYPASS TRAY
Gently pull the misfed paper out.
Open and close the side cover.
1
2
The message "
Clear
paper path." will be
cleared and copying will
be possible.
• When closing the side cover, press down on
the handle.
Note
• If the message does not clear, check again
to make sure that no pieces of paper
remain.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
MISFEED IN THE MACHINE
Open the bypass tray and the side
cover.
Check the misfeed location. Remove
the misfed paper following the
instructions for each location in the
illustration below.
1
2
If paper is misfed here, go to
If the misfed paper is visible
here, go to "C. Misfeed in the
If paper is misfed here, go to
A. Misfeed in the paper feed area
Push gently on both ends of the front
cover and open it.
Close the front cover and side cover.
1
3
The message "
Clear
paper path." will be
cleared and copying will
be possible.
6
Carefully remove the misfed paper.
2
Turn the roller rotating knob in the
direction of the arrow to assist in
removing it.
• When closing the front cover, gently hold
both ends.
• When closing the side cover, press on the
handle.
• If the message does not clear, check again
to make sure that no pieces of paper
remain.
Note
Be careful not to tear the
misfed paper during
removal.
Roller rotating knob
The fusing unit is hot. Do not touch
the fusing unit when removing misfed
Warning
paper. Doing so may cause a burn or
injury.
Do not touch the photoconductive drum
Caution
(green portion) when removing the misfed
paper. Doing so may damage the drum and
cause smudges on copies.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
B. Misfeed in the fusing area
Push gently on both ends of the front
cover and open it.
Lift the fusing unit release levers, to
return them to their operating
positions.
1
4
5
Turn the roller rotating knob in the
direction of the arrow.
2
Close the front cover and side cover.
Roller rotating knob
The message "
Clear
paper path." will be
cleared and copying will
be possible.
Carefully remove the misfed paper.
Lower the fusing unit release levers to
allow easier removal.
3
• When closing the front cover, gently hold
both ends.
Note
Be careful not to tear the
Fusing unit
• When closing the side cover, press on the
handle.
• If the message does not clear, check again
to make sure that no pieces of paper
remain.
release lever
misfed paper during
removal.
The fusing unit is hot. Do not touch
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
Warning
Caution
• Do not touch the photoconductive drum
(green portion) when removing the misfed
paper. Doing so may damage the drum and
cause smudges on copies.
• Be careful about unfixed toner on the
misfed paper not to soil your hands or
clothes.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
C. Misfeed in the transport area
Open the fusing paper guide by
1
pressing down the green-labeled
projection on the guide and remove
the misfed paper.
Be careful not to tear the
misfed paper during
removal.
The fusing unit is hot. Do not touch
Warning
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
If the misfed paper cannot be removed
by the previous step but is visible in
the paper output area, remove the
paper by pulling it into the paper
output area.
2
3
Be careful not to tear the
misfed paper during
removal.
6
Close the side cover.
The message "
Clear
paper path." will be
cleared and copying will
be possible.
• When closing the side cover, press on the
handle.
Note
• If the paper was torn, make sure that no
torn pieces remain in the machine.
• If the message does not clear, check again
to make sure that no pieces of paper
remain.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
MISFEED IN THE UPPER PAPER TRAY
Note
Make sure that there is no misfed paper in the tray before pulling it out. (p.94)
Lift and pull out the upper paper tray
and remove the misfed paper.
1
Be careful not to tear the
misfed paper during
removal.
Open and close the side cover.
2
The message "
Clear
paper path." will be
cleared and copying will
be possible.
• When closing the side cover, press on the
handle.
Note
• If the message does not clear, check again
to make sure that no pieces of paper
remain.
Close the upper paper tray.
3
Push the upper paper
tray in completely.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
MISFEED IN THE LOWER PAPER TRAY
• Use the following procedure to remove misfeeds that occur in the 250-sheet paper feed unit/2 x 250-sheet paper
feed unit.
Note
Open the lower side cover.
Close the lower paper tray.
1
2
3
5
Grasp the handle to open
the lower side cover.
Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
If the misfed paper is not seen in step
2, lift and pull out the lower paper tray
and remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
6
Close the lower side cover.
4
The message "
Clear
paper path." will be
cleared and copying will
be possible.
If the message does not clear, check again to
make sure that no pieces of paper remain.
Note
98
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
REPLACING THE TONER CARTRIDGE
When the toner replacement icon (
) appears, little toner remains. Obtain a replacement cartridge as soon as possible.
Add toner. Can not copy or print." appears in the display, the toner cartridge must be
When the message "
replaced before copying can be resumed. Follow the steps below to replace the toner cartridge.
• During a long copy run or when copying originals with many dark areas, the message "Toner replenishment in
Note
progress." may appear and copying will stop even though toner remains. The machine will feed toner for about
2 minutes. When the START indicator lights up, press the [START] key ( ) to resume copying.
• When the toner cartridge replacement required icon ( ) appears in the display, little toner remains and thus
copies may be faint.
Push on both ends of the front cover
and open it.
Insert the toner cartridge along the
guides until it locks in place while
pushing the lock release lever.
1
2
4
5
If there is any dirt or dust
on the toner cartridge,
remove it before
installing the cartridge.
Pull the toner cartridge out while
pressing the lock release lever.
Close the front cover.
When pulling out the
toner cartridge, place
your other hand on the
indentation of the
cartridge.
Toner cartridge
lock release lever
The toner cartridge
replacement required
indicator (
out.
) will go
After removing the toner cartridge, do not
shake it or tap on it. Doing so may cause
toner to leak from the cartridge. Put the old
cartridge immediately in the bag contained in
the box of the new cartridge. Dispose of the
old toner cartridge in accordance with local
regulations.
Caution
• Even after a new toner cartridge is
installed, the toner cartridge replacement
Note
required indicator (
) may still light up,
indicating that copying cannot be resumed
(toner is not fed sufficiently). In this case,
open and close the front cover. The
machine will feed toner again for about two
minutes and then copying can be resumed.
• Before closing the front cover, make sure
that the toner cartridge is correctly installed.
• When closing the front cover, gently hold
both ends.
Remove the new toner cartridge from
the bag. Grasp the cartridge on both
sides and shake it horizontally four or
five times.
3
4 or 5 times
Grasp the grip when holding the cartridge.
Caution
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
ROUTINE MAINTENANCE
7
This chapter explains how to keep the machine operating smoothly, including viewing copy count, and scan count,
the toner level indicator, and cleaning the machine.
CHECKING THE TOTAL OUTPUT
COUNT
To check the total number of pages output in copy, print, and fax modes and the total scan
count in scanner mode, hold down the [COPY] key when the machine is in the standby
state. The counts will appear while the key is held down. The total output count and the total
COPY
scan count can be used as a guideline for cleaning. When the total output count and the total
scan count exceed "999,999", the counts return to "0".
ON LINE
DATA
PRINT
• An A3 or 11" x 17" page is counted as two pages.
• Each two-sided sheet that is output is counted as two pages. (An A3 or 11" x 17" sheet is counted as four
pages.)
Note
• Blank copies and blank prints are included in the count.
• If the last page of a two-sided printing job is blank, it is not included in the count.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
ROUTINE MAINTENANCE
CLEANING THE DOCUMENT GLASS AND
SPF/RSPF/DOCUMENT COVER
If the document glass, underside of the document cover/SPF/RSPF, or the scanner for originals coming from the
SPF/RSPF (the long narrow glass surface on the right side of the document glass) become dirty, the dirt may appear
on copies. Always keep these parts clean.
Stains or dirt on the document glass/SPF/RSPF will also be copied. Wipe the document glass, underside of the
document cover/SPF/RSPF and the scanning window on the document glass with a soft, clean cloth.
If necessary, dampen the cloth with water. Do not use thinner, benzene, or similar volatile cleaning agents.
Do not spray flammable cleaner gas. Gas from the spray may come in contact with the internal
electrical components or high-temperature parts of the fusing unit, creating a risk of fire or
electrical shock.
Warning
CLEANING THE ORIGINAL SCANNING GLASS (ONLY
WHEN AN SPF/RSPF IS INSTALLED)
If white or black lines appear in copies made with using the SPF/RSPF,
use the provided glass cleaner to clean the original scanning glass. (If
white or black lines appear in copies or printed pages when the
SPF/RSPF is not used, see "CLEANING THE TRANSFER CHARGER"
(p.102)).
Example of dirty print image
White lines
Black lines
Open the SPF/RSPF and take out the
glass cleaner.
Clean the original scanning glass with
the glass cleaner.
1
2
3
Return the glass cleaner to its original
position.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
ROUTINE MAINTENANCE
CLEANING THE BYPASS TRAY PAPER FEED ROLLER
If misfeeds occur frequently when feeding envelopes, thick paper, etc. through the bypass tray, wipe the paper feed
roller at the feed slot of the bypass tray with a soft, clean cloth dampened with alcohol or water.
Paper feed roller
CLEANING THE TRANSFER CHARGER
If copies start becoming streaky or blotchy, the transfer charger may be dirty.
Clean the charger using the following procedure.
Turn the power switch off.
Set the charger cleaner onto the
transfer charger and gently slide the
cleaner in the direction indicated by
the arrow two or three times.
1
2
5
Open the bypass tray and the side
cover.
If the white sheet metal is
smudged with toner,
wipe it with a soft, clean
cloth.
Slide the charger cleaner from one end to the
other end along the groove of the transfer
Note
Lift and pull out the upper paper tray.
3
4
charger. If the cleaner is stopped on the way,
smudges on copies may occur.
Return the charger cleaner to its
original position. Close the upper
paper tray. Close the side cover by
pressing the handle on the cover.
6
7
7
Turn the power switch on.
Take the charger cleaner out by
holding the tab.
Charger
cleaner
102
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE DISPLAY CONTRAST
The contrast of the display can be adjusted as explained below.
Press the [SPECIAL FUNCTION] key.
Adjust the contrast with the [ ] or [ ]
key.
1
4
To reset the contrast to the
default setting, press the [C]
key.
ON LINE
DATA
SPECIAL FUNCTION
ID CARD COPY
SPECIAL
FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
LINE
DATA
COPY EXPOSURE PAPER SE
SCAN UR MODE RESOLUT
Press the [SPECIAL FUNCTION] key.
5
The special function
screen will appear.
SPECIAL
You will return to the base
FUNCTION
screen.
Select "DISPLAY CONTRAST" with
the [ ] or [ ] key.
2
PQ
SPECIAL FUNCTION
SPECIAL MODES
ED COPY
LEX SCAN
LEX SCAN
ORIG. SIZE ENTER
PAPER SIZE SET
ACC
DISPLAY CONTRAST
Press the [OK] key.
3
GHI
BACK
OK
DISPLAY CONTRAST
PQRS
PY
The display contrast
adjustment screen will
appear.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8
APPENDIX
8
Specifications, optional equipment, and supplies are explained in this chapter. To purchase optional equipment and
supplies, contact your authorised service representative.
SPECIFICATIONS (PRINTER AND
SCANNER)
PRINTER FUNCTION
Specifications
MX-182/MX-M182D Max. 18 ppm
*
Print speed
MX-M202D
MX-M232D
Max. 20 ppm
Max. 23 ppm
Resolution
600 dpi
128 MB
Memory
Emulation
SHARP SPLC (Sharp Printer Language with Compression)
USB connector (USB 2.0)
Interface connector
[USB cable]
Interface cables
Shielded twisted pair cable (max. length 3 m (10 feet), must support USB 2.0)
Please purchase a commercially available USB cable.
* Print speed during printing of the second sheet and following sheets when using A4 (8-1/2" x 11") plain paper and performing
continuous one-sided printing of the same page.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
SCANNER FUNCTION
Specifications
Type
Flatbed scanner
Scanning method
Light source
Document glass/SPF/RSPF
Cold cathode fluorescent lamp
Factory default: 150 dpi
Setting range: 50 dpi - 9600 dpi
Resolution
Original types
Effective scanning area
Scanning speed
Input Data
Sheets, bound documents
Approx. 297 mm (11-11/16") (Lengthwise) x 431 mm (16-31/32") (Width)
1.44 msec/line (Colour), 0.48msec/line (Greyscale/Black and White)
1 bit or 12 bit
Output Data
1 bit or 8 bit
Scanning colours
Protocol
Black and white 2 value, Greyscale, Colour
TWAIN, WIA (Windows XP/Vista/7), STI
USB 2.0 (Full-Speed/Hi-Speed compatible interface)
Yes
Interface
Drop out colour
Windows 2000/XP/Vista/7
(Detailed information can be found in "HARDWARE AND SOFTWARE
Supported operating
systems
Max. 2.5 mm (1/10") (leading and trailing edges)
Max. 3.0 mm (3/25") (along other edges in total)
Void area
[USB cable]
Interface cables
Scanner utilities
Shielded twisted pair cable (max. length 3 m (10 feet), must support USB 2.0)
Please purchase a commercially available USB cable.
Button Manager
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from these values in individual units.
Note
105
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONAL EQUIPMENT
Convenient optional equipment can be installed on the machine as needed.
• As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice.
Note
• Peripheral devices are normally optional, but are incorporated in some models as standard equipment.
MX-M182D/MX-M202D/
MX-M182
MX-M232D
1
Reversing single pass feeder (AR-RP10)
Single pass feeder (AR-SP10)
No
Yes
Yes*
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Document cover (AR-VR7)
Standard
Yes
250-sheet paper feed unit (AR-D36)
2 x 250-sheet paper feed unit (AR-D37)
Job separator tray kit (MX-TR10)
Expansion memory board (MX-EB14)
Facsimile expansion kit (MX-FX13)
Facsimile mounting kit (MX-XB17)
Network expansion kit (MX-NB12)
PS3 expansion kit (MX-PK10)
Yes
Yes
Yes
Yes
2
2
Yes*
Yes*
Yes
Yes
3
3
Yes*
Yes*
*1 Included as standard equipment depending on your country and region.
*2 MX-XB17 is necessary when mounting Fax only. (not necessary for network expansion kit)
*3 The network expansion kit (MX-NB12) must be installed.
8
106
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
SINGLE PASS FEEDER/REVERSING SINGLE PASS
FEEDER
Specifications
AR-SP10 (Single pass feeder)
AR-RP10 (Reversing single pass feeder)
2
2
Weight
Size
56 g/m to 90 g/m (15 lbs. to 24 lbs.)
A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
(5-1/2 x 8-1/2" size originals cannot be used in the duplex copy mode.)
Acceptable
original
Up to 40 sheets (Thickness 4 mm (5/32") and below)
For B4 (8-1/2" x 13") and larger sizes, up to 30 sheets
Capacity
A5, B5, B5R, A4, A4R, B4, A3
(5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17")
*
Detectable original sizes
Weight
Approx. 5.3 kg (11.7 lbs.)
586 mm (W) x 440 mm (D) x 132 mm (H)
(23-5/64" (W) x 17-21/64" (D) x 5-13/64" (H))
Approx. 5.4 kg (12.0 lbs.)
Dimensions
* The detectable original sizes vary by country and region.
DOCUMENT COVER
Specifications
AR-VR7
Weight
Approx. 1.5 kg (3.31 lbs.)
586 mm (W) x 426 mm (D) x 30 mm (H)
(23-5/64" (W) x 16-50/64" (D) x 1-12/64" (H))
Dimensions
107
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
250-SHEET PAPER FEED UNIT/2 X 250-SHEET PAPER
FEED UNIT
These paper feed units provide the convenience of increased paper capacity for the copier and a greater choice of
paper sizes readily available for copying.
The AR-D36 contains one 250-sheet paper tray and the AR-D37 contains two 250-sheet paper trays.
Part names
250-sheet paper feed unit
AR-D36
2 x 250-sheet paper feed unit
AR-D37
Side cover
Side cover
Trays
Tray
Specifications
AR-D36
AR-D37
Paper size
B5 to A3 (8-1/2" x 11" to 11" x 17")
One tray with capacity for 250 sheets of
Two trays with capacity for 250 sheets of
Paper capacity
2
2
80 g/m (20 lbs.) bond paper
80 g/m (20 lbs.) bond paper
2
2
Paper weight
Power supply
56 g/m to 90 g/m (15 lbs. to 24 lbs.)
Drawn from the machine
590 mm (W) x 477 mm (D) x 111 mm (H)
(23-15/64" (W) x 18-25/32" (D) x 4-11/32" (H))
590 mm (W) x 477 mm (D) x 211 mm (H)
(23-15/64" (W) x 18-25/32" (D) x 8-5/16" (H))
Dimensions
Weight
Approx. 5.5 kg (12.2 lbs.)
Approx. 10 kg (22.1 lbs.)
8
108
Download from Www.Somanuals.com. All Manuals Search And Download.
STORAGE OF SUPPLIES
Standard supplies for this product that are to be replaced by the user are paper and toner cartridge.
For best copying results, be sure to use only SHARP products.
Only genuine SHARP consumables carry the Genuine Supplies label.
GENUINE SUPPLIES
PROPER STORAGE
● Store the supplies in a location that is:
clean and dry,
at a stable temperature,
not exposed to direct sunlight.
● Store paper in the wrapper and lying flat.
Paper stored out of the wrapper or in packages
standing on end may curl or get damp, resulting in
paper misfeeds.
Supply of spare parts and consumables
The supply of spare parts for repair of the machine is guaranteed for at least 7 years following the termination of
production. Spare parts are those parts of the machine which may break down within the scope of the ordinary
use of the product, whereas those parts which normally exceed the life of the product are not to be considered as
spare parts. Consumables too, are available for 7 years following the termination of production.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 9
SYSTEM SETTINGS GUIDE
9
PURPOSE OF THE SYSTEM SETTINGS
The system settings are used by the administrator of the machine to enable or disable functions to suit the needs of
your workplace.
This manual explains only the system settings that are common to all the functions of the machine, (copy and printer
functions), as well as system settings that are specifically for the copy function.
• To use the system settings, the administrator password must be entered.
PROGRAMS RELATED TO ALL FUNCTIONS OF THE
MACHINE (COPY AND PRINTER FUNCTIONS)
These programs are used to enable auditing mode, adjust power consumption, and manage peripheral devices.
Auditing mode can be enabled separately for the copy. When auditing mode is enabled for a function, a valid
account number must be entered in order to use the function. (If a valid account number is not entered, the function
cannot be used.)
When auditing mode is enabled for the printer function, an account number must be entered at the user's computer
when the print command is selected. (Depending on the system settings, a job may be printed even if an incorrect
account number is entered, and thus care must be taken when managing printer page counts.) If "CANCEL JOBS
OF INVALID ACCOUNTS" is enabled in the system settings, printing will be prohibited if an invalid account number
is entered.)
PROGRAMS FOR COPY MODE
These programs are used to change the factory default copy settings to settings that better suit the needs of your
workplace.
When auditing mode is enabled for the copy function,
• A valid account number must be entered to make copies.
(Copying is not possible unless a valid account number is entered.)
• A count is kept of the number of copies made by each account. This allows you to monitor copier usage by
account. (The counts can be totaled.)
* The account number is a five-digit number.
• A limit can be set for the number of copies that can be made by each account.
PROGRAMMING AN ADMINISTRATOR PASSWORD
The administrator password is a 5-digit number that must be entered in order to access the system settings. The
administrator (administrator of the machine) should change the default administrator password that was set at the
factory to a new 5-digit number. Be sure to remember the new administrator password, as it must be entered each
time the system settings are subsequently used. (Only one administrator password can be programmed.)
Refer to the Start Guide for the factory default administrator password.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAMMING AN
ADMINISTRATOR PASSWORD
Press the [SPECIAL FUNCTION] key.
Press the [OK] key.
1
5
ON LINE
DATA
OK
SPECIAL FUNCTION
ID CARD COPY
CHANGE ADMIN PW
PRESENT:22222
SPECIAL
FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
LINE
DATA
COPY EXPOSURE PAPER SE
SCAN UR MODE RESOLUT
NEW
:-----
The special function
screen will appear.
The administrator
password change screen
appears.
Select "SYSTEM SETTINGS" with the
[ ] or [ ] key.
2
Enter the new 5-digit administrator
password with the numeric keys.
6
PQ
SPECIAL FUNCTION
WXYZ
PAPER SIZE SET
CHANGE ADMIN PW
ED COPY
LEX SCAN
LEX SCAN
DISPLAY CONTRAST
TOTAL COUNT
PRESENT:22222
ACC
NEW
:111--
SYSTEM SETTINGS
Any 5 digits can be used for the administrator
password.
Press the [OK] key.
3
GHI
BACK
OK
Enter admin
password.
Press the [OK] key.
7
PQRS
• The previously programmed
administrator password is
replaced by the new
OK
ADMIN PASSWORD:
PY
-----
The administrator
administrator password.
• Press the [CA] key to return to
the base screen.
password entry screen appears.
Use the numeric keys to enter the
4
five-digit administrator password.
ABC
DEF
MNO
WXYZ
INTERRU
MODE SELECT
CHANGE ADMIN PW
COPIER
GHI
JKL
PQRS
T
_
@.-
PRINTER
ACC. #
END
SCANNER
•
If this is the first time you are programming the
administrator password, enter the factory default
code. (Refer to the Start Guide)
•
•
" " appears for each digit that you enter.
The special modes screen will appear with
"CHANGE ADMIN PW" selected.
111
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM SETTINGS LIST
A list of basic programs used for the machine and a list of programs used for the copy function are shown below.
Programs for general use of the
machine
Programs for Copy Mode
Program name
Page
Program name
Page
ADMINISTRATOR PASSWORD CHANGE
ADMINISTRATOR PASSWORD
CHANGE
9
* OFFSET FUNCTION is not available in some
countries and regions.
112
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE SYSTEM SETTINGS
Press the [SPECIAL FUNCTION] key.
Select the desired mode with the [ ]
or [ ] key.
1
5
ON LINE
DATA
SPECIAL FUNCTION
ID CARD COPY
SPECIAL
FUNCTION
MODE SELECT
CHANGE ADMIN PW
COPIER
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
LINE
DATA
COPY EXPOSURE PAPER SE
SCAN UR MODE RESOLUT
PRINTER
SCANNER
The special function
screen will appear.
Example: The screen when "COPIER" is selected.
Select "SYSTEM SETTINGS" with the
[ ] or [ ] key.
Press the [OK] key.
2
6
OK
COPIER
PQ
SPECIAL FUNCTION
EXPOSURE ADJUST
MARGIN DEFAULT
ERASE ADJUST
PAPER SIZE SET
ED COPY
LEX SCAN
LEX SCAN
DISPLAY CONTRAST
TOTAL COUNT
ID CARD SETTING
ACC
The settings of the
selected mode appear.
SYSTEM SETTINGS
Several programs will have checkboxes in front of
them. To enable a function (make a checkmark
appear), press the [OK] key. To disable the function,
press the [OK] once again to remove the checkmark.
To configure a program that has a checkbox, go to
step 9.
Press the [OK] key.
3
GHI
BACK
OK
Enter admin
password.
PQRS
Select the desired program with the
[ ] or [ ] key.
ADMIN PASSWORD:
7
PY
-----
The administrator password entry screen appears.
Enter the administrator password with
the numeric keys.
4
Press the [OK] key and follow the
instructions in the program screen.
8
ABC
JKL
DEF
MNO
WXYZ
INTERRU
MODE SELECT
CHANGE ADMIN PW
COPIER
GHI
OK
PQRS
T
_
@.-
PRINTER
ACC. #
END
SCANNER
•
•
" " appears for each digit that you enter.
The mode selection screen appears.
To use another program for the same
mode, select the desired program with
the [ ] or [ ] key.
9
To use a program for a different mode, press the
[BACK] key and select the desired mode. To exit
the system settings, press the [CA] key.
113
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM SETTINGS GUIDE
TOTAL/ACCOUNT
ACCOUNT CONTROL
This program is used to display the page counts of
each account in copy, print, and scan modes, and the
usage limits for copy and print modes. Misfed pages
are not included in the page counts.
For the network scanner function, the number of
transmitted pages is displayed.
These programs are used to control use of the
machine by account. To access one of these
programs, select "ACCOUNT CONTROL" in the mode
selection screen, select the desired program in the
account control screen, and press the [OK] key.
AUDITING MODE
Select "TOTAL/ACCOUNT" and press the [OK] key.
The following screen will appear.
This program is used to enable auditing mode for
copy, print, and scan mode. To enable auditing mode
for fax mode, see the "Operation Guide (FACSIMILE
EXPANSION KIT)".
When auditing mode is enabled, a count is kept of the
number of pages output by each account (up to 50
accounts can be established), and the counts can be
displayed and totaled as necessary. To use the
machine, the 5-digit account number programmed for
the user's account must be entered.
To enable auditing mode for the printer and scanner
functions, the optional network expansion kit is
required. If the network expansion kit is not installed,
auditing mode cannot be used for printing and
scanning. Auditing mode for the printer function can
only be used for PCL and PS printers. Auditing mode
for the scanner function can only be used for network
scanning.
TOTAL/ACCOUNT
ACCOUNT #
COPIES
: 18114
000,222
COPY LIMIT 02,000
[ ]:NEXT
Switch to the page counts in other modes for the same
account, as well as the page limits, with the [ ] or [
key.
To change to a different account number, press the
]
[
] or [ ] key.
RESET ACCOUNT
This program is used to reset the copy, print, and scan
page counts of an individual account, or all accounts,
to zero.
Auditing mode is initially disabled for all modes (factory
default setting).
Select "RESET ACCOUNT" and press the [OK] key.
The following screen will appear.
Select "AUDITING MODE" and press the [OK] key.
The following screen will appear.
RESET ACCOUNT
RESET 1 ACC.
RESET ALL ACC.
AUDITING MODE
COPIER
PRINTER
SCANNER
Select the desired mode with the [ ] or [ ] key.
Resetting the page counts of all accounts
To enable auditing mode for the selected
mode, press the [OK] key so that a
checkmark appears in the checkbox.
Auditing mode is enabled.
1
Select "RESET ALL ACC." with the [ ] or
[ ] key and then press the [OK] key.
1
2
Select "YES" with the [ ] or [ ] key and
then press the [OK] key.
To disable auditing mode for the selected
mode, press the [OK] key to remove the
checkmark from the checkbox.
Auditing mode is disabled.
9
After enabling "AUDITING MODE", program
account numbers as explained in "ACC. #
Note
114
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM SETTINGS GUIDE
Resetting a single account
Deleting an account number
Select "RESET 1 ACC." with the [ ] or [ ]
key and then press the [OK] key.
Select the desired account with the [ ] or
[ ] key.
If "---,---" appears for a page limit, a limit
has not been set.
Select the desired mode with the [ ] or
[ ] key and then press the [OK] key.
Press the [ ] or [ ] key to select "YES"
and then press the [OK] key.
If you wish to reset the page counts of
another account, repeat steps 2 to 4.
Select "DELETE" with the [ ] or [ ] key
and then press the [OK] key.
If you wish to delete all account numbers,
select "DELETE ALL ACC." and press the
[OK] key.
When the message "DELETE?" appears, select
"YES" with the [ ] or [ ] key to delete all
accounts and press the [OK] key. If you do not
wish to delete all account numbers, select "NO"
and press the [OK] key.
If you wish to delete an each account
number, select "DELETE 1 ACC." and
press the [OK] key.
Enter the account number that you wish to
delete with the numeric keys and then
press the [OK] key.
Select "YES" with the [ ] or [ ] key and
then press the [OK] key.
If you enter a number that has not been
programmed in step 4 and then press the [OK]
key, you will return to the number entry screen of
step 4.
If you wish to delete another account
number, repeat steps 4 and 5.
1
2
3
4
5
6
7
1
2
3
4
5
To exit, press the [BACK] key repeatedly.
ACC. # CONTROL
This program is used to program, delete, and change
account numbers.
Select "ACC. # CONTROL" and press the [OK] key.
The following screen will appear.
6
7
ACC. # CONTROL
ENTER
To exit, press the [BACK] key repeatedly.
DELETE
Changing an account number
CHANGE
Select "CHANGE" with the [ ] or [ ] key
and then press the [OK] key.
Enter the account number that you wish to
change in "PRESENT #".
1
2
Programming an account number
Enter the new account number in "NEW #".
Press the [OK] key.
If you enter an account number that has already
been programmed in step 3, a warning message
will appear and you will return to step 3. Enter a
different number.
3
4
Select "ENTER" with the [ ] or [ ] key
and then press the [OK] key.
If 50 accounts have already been programmed, a
warning message will appear. Delete any
unneeded accounts and then program the new
account.
1
If you wish to change another account
number, repeat steps 2 to 4.
To exit, press the [BACK] key repeatedly.
Use the numeric keys to enter a five-digit
account number (00000 to 99999).
The administrator password cannot be used as an
account number.
5
6
2
3
Press the [OK] key.
• When entering an account number, the
[OK] key will not be accepted unless 5
digits have been entered.
If you enter an account number that has already
been programmed in step 2, a warning message
will appear and you will return to step 2. Enter a
different number.
If you wish to program another account
number, repeat steps 2 and 3.
Note
• If you press the [C] key while entering an
account number, the account number
display will change to "-----".
4
5
To exit, press the [BACK] key repeatedly.
115
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM SETTINGS GUIDE
ACCOUNT LIMIT
ACC. # SECURITY
This program is used to set limits for the number of
pages that can be printed by each account in print
mode and copy mode.
When this program is enabled, the machine will not
allow operation for one minute if an incorrect account
number is entered three times in a row. During this
time, "Please see your administrator for assistance."
will appear in the display.
Select "ACCOUNT LIMIT" and press the [OK] key. The
following screen appears.
To enable this program, select "ACC. # SECURITY"
and then press the [OK] key so that a checkmark
appears in the checkbox.
To disable this program, select "ACC. #
SECURITY" and then press the [OK] key so that a
checkmark does not appear in the checkbox.
ACCOUNT LIMIT
SINGLE ACC. LIMIT
ALL ACC. LIMIT
CANCEL JOBS OF INVALID
ACCOUNTS
When enabled, this program cancels a print job if no
account number is entered or an invalid account
number is entered. This program is only effective when
"AUDITING MODE" has been enabled for print mode.
The function is initially disabled (factory default
setting).
Limiting the number of pages used by an
account
Select "SINGLE ACC. LIMIT" with the [ ]
or [ ] key and then press the [OK] key.
1
2
Select "COPIER" or "PRINTER" mode with
the [ ] or [ ] key.
Press the [OK] key.
Enter the desired account number with the
numeric keys.
Enter a page usage limit with the numeric
keys (max. 50000).
• "0" cannot be specified.
3
4
To prohibit printing when a valid account number
is not entered, select "CANCEL JOBS OF INVALID
ACCOUNTS" and then press the [OK] key so that a
checkmark appears in the checkbox.
To allow printing when a valid account number is
not entered, select "CANCEL JOBS OF INVALID
ACCOUNTS" and then press the [OK] key to
remove the checkmark from the checkbox.
5
• If you wish to cancel the limit, press the [C] key
and go to step 6.
Press the [OK] key.
If you wish to set a limit for another
account number, repeat steps 4 to 6.
Pages printed by invalid account numbers
are added to the page count of "OTHERS"
(account number).
6
7
Note
If you press the [BACK] key, you will return to the
screen of step 2. If you wish to set a limit for the
other mode (copy or printer), select the mode in
step 2 and repeat steps 3 to 6. To exit, press the
[BACK] key repeatedly.
Setting a limit for all accounts
Select "ALL ACC. LIMIT" with the [ ] or
[ ] key and then press the [OK] key.
Select "COPIER" or "PRINTER" mode with
the [ ] or [ ] key.
Enter the page usage limit for all accounts
with the numeric keys (max. 50000).
1
2
3
9
If you wish to cancel the limit, press the [C] key
and go to step 4.
Press the [OK] key.
You will return to the screen of step 2. If you wish
to set a limit for the other mode (copy or printer),
select the mode in step 2 and repeat steps 3 to 4.
To exit, press the [BACK] key repeatedly.
4
116
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM SETTINGS GUIDE
MEM. FOR PRINTER
DEVICE CONTROL
(When the dual function board is installed)
These programs are used to configure settings for
hardware functions of the machine. To access one of
these programs, select "DEVICE CONTROL" in the
mode selection screen, select the desired program in
the device control screen, and press the [OK] key.
The machine is equipped with memory that stores
scanned original image data. Part of this memory is
also used to store print data. This program is used to
set the percentage of memory that is allocated to the
print function. The memory allocation can be set from
30% to 70% in increments of 10%.
The factory default setting is "50%".
WAITING COPY LAMP SETTING
This program is used to select whether the copy lamp
(light source) is on or off when the machine is in
standby mode. If the copy lamp (light source) is set to
turn off in standby mode, power will be conserved,
however, the first copy time will be longer than if the
lamp is on.
The factory default setting is "ON".
Select "WAITING COPY LAMP SETTING" and press
the [OK] key. The following screen will appear.
Select "MEM. FOR PRINTER" and press the [OK] key.
The following screen will appear.
MEM. FOR PRINTER
30%
40%
50%
60%
COPY LAMP SETTING
Select the desired percentage with the [ ]
or [ ] key.
Press the [OK] key.
1
2
ON
OFF
The memory for storing original image data
Note
and print data is 16 MB. An optional memory
module can be installed to expand memory
to 272 MB (the module adds 256 MB).
Select "ON" or "OFF" with the [ ] or [ ]
key.
Press the [OK] key.
1
2
USB2.0 MODE
OFFSET FUNCTION
This sets the data transfer speed of the USB 2.0 port.
The factory default setting is "HI-SPEED".
If you wish to use USB 2.0 (Hi-Speed mode), be sure
machine settings are configured appropriately.
When the offset function is enabled, sets of output will
be offset from each other for easy separation when
copying is performed in sort mode or non-sort mode.
The offset function can be enabled separately for the
top tray (this only appears if the job separator tray kit
has been installed) and centre tray.
The function is initially enabled (factory default setting)
for both the top tray and the centre tray.
Select "USB2.0 MODE" and press the [OK] key. The
following screen will appear.
Select "OFFSET FUNCTION" and press the [OK] key.
The following screen will appear.
USB2.0 MODE
FULL-SPEED
HI-SPEED
OFFSET FUNCTION
UPPER TRAY
CENTRE TRAY
Select the transfer speed with the [ ] or
[ ] key.
Press the [OK] key.
1
2
Select "UPPER TRAY" or "CENTRE TRAY"
1
with the [ ] or [ ] key.
Press the [OK] key.
• The setting is enabled and a checkmark
appears in the checkbox.
2
• If this procedure is performed when the setting
is already enabled, the checkmark is cleared
and the setting is disabled.
* This function is not available in some countries and regions.
117
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM SETTINGS GUIDE
Select "AUTO CLEAR" and press the [OK] key. The
following screen will appear.
System requirements for USB 2.0
(Hi-Speed mode)
AUTO CLEAR
The USB port on the machine supports USB 2.0
Hi-Speed mode.
The following system is required to use USB 2.0
(Hi-Speed mode):
60 sec.
(0~120)
The computer is running Windows Vista/XP/2000
and the Microsoft USB 2.0 driver is pre-installed, or
the USB 2.0 driver for Windows Vista/XP/2000 that
Microsoft provides through Windows Update is
installed.
* Even when the Microsoft USB 2.0 driver is installed,
some USB 2.0 expansion cards are not capable of
attaining the speed stipulated by the Hi-Speed
standard. This problem can often be fixed by installing
a more recent driver for the card. To obtain the most
recent driver for your card, contact the card's
manufacturer.
Select the desired time with the [ ] or [ ]
key.
If you do not want auto clear to operate, select "0".
1
2
Press the [OK] key.
The Auto Clear function is disabled when
Note
scanned data is stored under the following
status: When the last page has not been
scanned during the 2 IN 1 or 4 IN 1 copy
process (one page has been scanned for a
two-page set or three pages have been
scanned in a four-page set), or only one side
has been scanned in the ID card copy
process.
RETURN FROM COPY MODE TIMING
When there are print jobs or fax print jobs waiting to be
printed after copy job is finished, this program is used
to set a brief wait time until printing of those jobs
begins. Setting a brief wait time allows another copy
job to be performed following the previous copy job.
Time selections are "0 sec.", "10 sec.", "30 sec.", and
"60 sec.".
DISABLE DISPLAY TIMEOUT
This program is used to select whether or not the
display will automatically return to the base screen if
no keys are pressed on the operation panel for one
minute in scan or fax mode.
The factory default setting is 30 seconds.
The factory default setting is automatic return to the
base screen.
Select "RETURN FROM COPY MODE TIMING" and
press the [OK] key. The following screen will appear.
To disable automatic return to the base screen,
select "DISABLE DISPLAY TIMEOUT", and press
the [OK] key so that a checkmark appears in the
checkbox.
To re-enable automatic return to the base screen,
select "DISABLE DISPLAY TIMEOUT" once again
and press the [OK] key to clear the checkmark
from the checkbox.
RETURN FROM COPY
30 sec.
(0~60)
Select the desired time with the [ ] or [ ]
key.
1
2
Press the [OK] key.
LANGUAGE SETTING
This program is used to select the display language.
Select "LANGUAGE SETTING", press the [OK] key,
and follow the steps below.
OPERATION SETTING
These programs are used to configure various settings
related to the operation panel. To access one of these
programs, select "OPERATION SETTING" in the
mode selection screen, select the desired program in
the operation setting screen, and press the [OK] key.
Select the display language with the [ ] or
[ ] key.
1
Press the [OK] key.
2
9
MESSAGE TIME
AUTO CLEAR
This program is used to set the length of time that
messages appear in the display (this applies to
messages that appear for a certain length of time and
then automatically disappear.) Select from "SHORT (3
sec.)", "NORMAL (6 sec.)", or "LONG (9 sec.)".
The factory default setting is "NORMAL (6 sec.)".
This function returns the copy settings to the default
settings if the operation panel is not used for the
duration of time set with this program following the end
of a copy job. Time selections are "0 sec.", "10 sec.",
"20 sec.", "60 sec.", "90 sec." and "120 sec.".
The factory default setting is 60 seconds.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM SETTINGS GUIDE
Select "MESSAGE TIME" and press the [OK] key. The
following screen will appear.
KEY PRESS TIME
This program is used to set the duration of time that a
key must be pressed to take effect.
A longer setting can be selected to prevent keys
pressed accidentally from taking effect. Keep in mind,
however, that when a longer setting is selected more
care is required when pressing keys to ensure that the
key input is registered.
MESSAGE TIME
SHORT (3 sec.)
NORMAL (6 sec.)
LONG
(9 sec.)
The initial factory setting is "MINIMUM".
Select the desired display time with the
[ ] or [ ] key.
Press the [OK] key.
1
2
Select "KEY PRESS TIME" and press the [OK] key.
The following screen appears.
KEY PRESS TIME
MINIMUM
KEY TOUCH SOUND
This program is used to set the volume of the key
touch sound that is heard each time a key is pressed.
The initial factory setting is "SHORT".
0.5 sec.
1.0 sec.
1.5 sec.
Select the desired time with the [ ] or [ ]
key.
Press the [OK] key.
1
2
Select "KEY TOUCH SOUND" and press the [OK] key.
The following screen will appear.
KEY TOUCH SOUND
OFF
SHORT
LONG
DISABLE AUTO KEY REPEAT
This program is used to stop a setting from changing
continuously when the [ ] or [ ] key is held down,
such as when setting the zoom ratio or the original size
(auto key repeat will not operate). When this program
is enabled, a key must be pressed repeatedly instead
of holding it down.
Select the desired volume with the [ ] or
[ ] key.
To turn the key touch sound off, select "OFF".
1
2
Press the [OK] key.
Auto key repeat is initially set to operate (factory
default setting).
To disable auto key repeat, select "DISABLE AUTO
KEY REPEAT" and press the [OK] key so that a
checkmark appears in the checkbox.
KEYS TOUCH SOUND AT INITIAL
POINT
This program is used to select whether or not a beep
will sound at preset base settings as you press a key
to select a setting.
To re-enable auto key repeat, select "DISABLE
AUTO KEY REPEAT" once again and press the
[OK] key so that the checkmark is cleared from the
checkbox.
The factory default setting is no beep.
If you would like a beep to sound, select "KEYS
TOUCH SOUND AT INITIAL POINT" and press the
[OK] key so that a checkmark appears in the
checkbox.
DISABLE PAPER SIZE SET
This program is used to disable "PAPER SIZE SET" in
the special functions menu. When disabled, "PAPER
SIZE SET" cannot be used when the [SPECIAL
FUNCTIONS] key is pressed, which prevents users
other than the administrator from easily changing the
paper size setting.
If you would not like a beep to sound, select
"KEYS TOUCH SOUND AT INITIAL POINT" once
again and press the [OK] key so that the
checkmark is cleared from the checkbox.
"DISABLE PAPER SIZE SET" is initially disabled
(factory default setting).
119
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM SETTINGS GUIDE
To enable the setting, select "DISABLE PAPER
SIZE SET" and press the [OK] key so that a
checkmark appears in the checkbox.
Select "AUTO POWER SHUT-OFF TIMER" and press
the [OK] key. The following screen will appear.
AUTO POWER OFF
To disable the setting, select "DISABLE PAPER
SIZE SET" once again and press the [OK] key
so that the checkmark is cleared from the
checkbox.
min.
(1~240)
Select the desired time with the [ ] or [ ]
key.
Press the [OK] key.
1
2
ENERGY SAVE
These programs are used to configure energy saving
settings. To access one of these programs, select
"ENERGY SAVE" in the mode selection screen, and
select the desired program in the energy save screen,
and then press the [OK] key.
PREHEAT MODE
This program is used to set the duration of time until
preheat mode, which automatically lowers the fusing
unit temperature, activates when the operation panel is
not used. Using this function helps conserve energy,
preserve natural resources, and reduce environmental
pollution. "1 min.", "5 min.", "15 min.", "30 min.", "60
min.", "120 min.", or "240 min." can be selected for the
duration of time. Select a setting that suits your work
conditions.
AUTO POWER SHUT-OFF
This program is used to enable auto power shut-off
mode, which automatically turns off the power to the
fusing unit if the operation panel is not used for a
certain duration of time.
Enabling auto power shut-off mode helps conserve
energy, preserve natural resources, and reduce
environmental pollution.
Select "PREHEAT MODE" and press the [OK] key.
The following screen will appear.
The function is initially enabled.
Rather than disabling the auto power
PREHEAT MODE
Note
shut-off feature, it is recommended that you
first try lengthening the time set in "AUTO
most cases a suitable timer setting will allow
work to proceed with minimal delay and still
enable you to enjoy the benefits of power
conservation.
min.
(1~240)
Select the desired time with the [ ] or [ ]
key.
Press the [OK] key.
1
2
To enable auto power shut-off mode, select "AUTO
POWER SHUT-OFF", and press the [OK] key so
that a checkmark appears in the checkbox.
(PRINTER) AUTO POWER SHUT OFF
This function automatically switches the machine to
auto power shut-off mode immediately after a print job
finishes.
To disable auto power shut-off mode, select
"AUTO POWER SHUT-OFF" once again and press
the [OK] key so that the checkmark is cleared from
the checkbox.
If "OFF" is set, the duration of time for the Auto power
shut-off timer set in the "AUTO POWER SHUT-OFF
TIMER" setting.
AUTO POWER SHUT-OFF TIMER
This program is used to set the duration of time until
auto power shut-off mode activates when the
operation panel is not used. Using this function helps
conserve energy, preserve natural resources, and
reduce environmental pollution.
"1 min.", "5 min.", "15 min.", "30 min.", "60 min.", "120
min." or "240 min." can be selected for the duration of
time. Select a setting that suits your work conditions.
TONER SAVE MODE
9
The toner save mode will reduce toner consumption by
approximately 10% in the automatic and text,
exposure modes. Copies will be lighter but still
adequate for general use. Selection of this mode has
no effect on the photo mode.
The function is initially disabled (factory default
setting).
120
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM SETTINGS GUIDE
To turn on the toner save mode, highlight "TONER
SAVE MODE" and press the [OK] key to display a
check mark in the check box.
MARGIN DEFAULT
mm
To turn off the toner save mode, select this
program and press the [OK] key again to clear the
check mark in the check box.
(0~20)
Adjust the default margin width with the
[ ] or [ ] key.
The width can be set from 0 to 20 mm in
increments of 5 mm (0" to 1" in increments of 1/4").
1
2
COPY SETTINGS
These programs are used to enable various copy
functions. To access one of these programs, select
"COPIER" in the mode selection screen, select the
desired program in the copy settings screen, and
press the [OK] key.
Press the [OK] key.
ERASE ADJUST
(When the dual function board is installed)
This is used to set the default erasure width.
The factory default setting is "10 mm (1/2 inch)".
EXPOSURE ADJUST
This program is used to adjust the exposure level
when "AUTO" is used for the exposure mode. The
auto exposure level can be set separately for the
document glass and the SPF/RSPF.
One of five levels can be selected, with the left end of
the scale the lightest level and the right end of the
scale the darkest level.
Select "ERASE ADJUST" and press the [OK] key. The
following screen will appear.
ERASE ADJUST
mm
(0~20)
The factory default setting is the middle level.
Select "EXPOSURE ADJUST" and press the [OK] key.
The following screen will appear.
Adjust the edge erase and centre erase
width with the [ ] or [ ] key.
The edge erase width and the centre erase width
share the same default value, which can be set
from 0 to 20 mm in increments of 5 mm (0" to 1" in
increments of 1/4").
1
2
EXPOSURE ADJUST
PLATEN
SPF/RSPF
Press the [OK] key.
Select "PLATEN" or "SPF/RSPF" with the
[ ] or [ ] key.
Press the [ ] or [ ] key to adjust the
exposure.
Repeat steps 1 and 2 to adjust the other
exposure.
Press the [OK] key.
1
2
3
4
ID CARD SETTING
The layout pattern for copying of the ID card can be
changed during the ID card copy process.
the available layout patterns.
Select "ID CARD COPY" and press the [OK] key. The
following screen will appear.
ID CARD SETTING
A4 SIZE
MARGIN DEFAULT
(When the dual function board is installed)
This is used to set the default margin width.
A5-A3 SIZE
The factory default setting is "10 mm (1/2 inch)".
Select "MARGIN DEFAULT" and press the [OK] key.
The following screen will appear.
Press the [ ] or [ ] key to select a layout
1
pattern.
Press the [OK] key.
2
121
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM SETTINGS GUIDE
Select the exposure mode with the [ ] or
[ ] key.
If you selected "TEXT" or "PHOTO", set the
exposure level with the [ ] or [ ] key.
CARD SHOT DEFAULT
1
2
3
(When the dual function board is installed)
This program is used to set the default dimensions that
appear when the card shot size entry screen is
displayed.
The factory default settings are 86 mm (3-3/8") for the
width (X) and 54 mm (2-1/8") for the length (Y).
Press the [OK] key.
STREAM FEEDING
Select "CARD SHOT DEFAULT" and press the [OK]
key. The following screen will appear.
When stream feeding mode is enabled, additional
originals which are placed in the SPF/RSPF within 5
seconds after the previous original was fed will be
copied automatically. (If more than 5 seconds elapse,
the [START] key ( ) must be pressed again.)
This function can be used when scanning originals in
copy and scan modes.
CARD SHOT DEFAULT
SIZE(mm)
X:
Y:
The function is initially disabled (factory default
setting).
Select X or Y with the [ ] or [ ] key and
adjust the corresponding default value
with the [ ] or [ ] key.
1
2
To enable stream feeding, select "STREAM
FEEDING" and press the [OK] key so that a
checkmark appears in the checkbox.
Press the [OK] key.
To disable stream feeding, select "STREAM
FEEDING" once again and press the [OK] key so
that the checkmark is cleared from the checkbox.
DEFAULT TRAY SET
This program is used to set which tray is selected by
default.
Trays that appear for selection will vary depending on
the optional trays that have been installed.
The factory default setting is "TRAY 1".
ROTATION COPY
(When the dual function board is installed)
If the orientation of the original does not match that of
the paper, the image can be rotated.
Rotation copy operates when automatic paper
selection or automatic ratio selection operates.
The function is initially enabled (factory default
setting).
Select "DEFAULT TRAY SET" and press the [OK] key.
The following screen will appear.
DEFAULT TRAY SET
TRAY 1
TRAY 2
If the image is both rotated and reduced, the
TRAY 3
Note
position of the copied image will vary
depending on the orientations of the original
and the paper.
TRAY 4
Select the tray with the [ ] or [ ] key.
Press the [OK] key.
1
2
Original
Paper
Copy
DEFAULT EXPOSURE
This program is used to select the exposure
mode/level that is initially selected when the
[EXPOSURE] key is pressed.
The factory default setting is "AUTO".
9
Select "DEFAULT EXPOSURE" and press the [OK]
key. The following screen will appear.
To enable rotation copy, select "ROTATION COPY"
and press the [OK] key so that a checkmark
appears in the checkbox.
DEFAULT EXPOSURE
AUTO
AUTO
TEXT
To disable rotation copy, select "ROTATION
COPY" once again and press the [OK] key so that
the checkmark is cleared from the checkbox.
PHOTO
122
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM SETTINGS GUIDE
SORT AUTO SELECT
LIMIT OF COPIES
This program is used to set the limit for the number of
copies that can be set (and that can appear in the
display) for one copy job.
The factory default setting is "999 copies".
Select "LIMIT OF COPIES" and press the [OK] key.
The following screen will appear.
(When the dual function board is installed)
This program is used to select the default output mode
when the SPF/RSPF is used for copying.
The initial factory setting is "SORT".
Select "SORT AUTO SELECT" and press the [OK]
key. The following screen will appear.
LIMIT OF COPIES
99 copies
SORT AUTO SELECT
NO SORT
999 copies
SORT
Select "99 copies" or "999 copies" with the
[ ] or [ ] key.
Press the [OK] key.
1
2
Select the output mode with the [ ] or [ ]
1
key.
Press the [OK] key.
2
DISABLE AUTO PAPER SELECTION
PHOTO MODE DEFAULT
This program is used to disable automatic paper
selection. When automatic paper selection is disabled,
the most suitable paper is not selected automatically
when an original is placed on the document glass or in
the document feeder tray.
This program is used to select the method of
expressing halftones when "PHOTO" is selected with
the [EXPOSURE] key for a copy job. Select
"PATTERN 1" or "PATTERN 2" for the method of
expressing halftones.
"PATTERN 1" is recommended for printed photos,
providing sharp images and good expression of
outlines.
This function is initially disabled (factory default
setting).
To disable auto paper selection, select "DISABLE
AUTO PAPER SELECTION" and press the [OK] key
so that a checkmark appears in the checkbox.
"PATTERN 2" is recommended for photos on
photographic paper, providing a soft image.
The factory default setting is "PATTERN 2".
To re-enable auto paper selection, select
"DISABLE AUTO PAPER SELECTION" once again
and press the [OK] key so that the checkmark is
cleared from the checkbox.
Select "PHOTO MODE DEFAULT" and press the [OK]
key. The following screen will appear.
PHOTO MODE DEFAULT
PATTERN 1
PATTERN 2
DISABLE 2-SIDED COPY
(Only on models that support two-sided
printing)
Use this program when you wish to disable two-sided
copying or when the two-sided function has failed.
When this program is enabled, only one-sided printing
is possible.
The function is initially disabled (factory default
setting).
Select "PATTERN 1" or "PATTERN 2" with
1
the [ ] or [ ] key.
Press the [OK] key.
2
To disable two-sided copying, select "DISABLE
2-SIDED COPY" and press the [OK] key so that a
checkmark appears in the checkbox.
To re-enable two-sided copying, select "DISABLE
2-SIDED COPY" once again and press the [OK] key
so that the checkmark is cleared from the
checkbox.
123
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION GUIDE
MXM232D-EX1
Download from Www.Somanuals.com. All Manuals Search And Download.
|